1937 files changed, 68048 insertions, 14411 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index f4b210ab0612..a5af0edd3eb8 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -301,17 +301,13 @@ config ARCH_HAS_DMA_CLEAR_UNCACHED
 config ARCH_HAS_CPU_FINALIZE_INIT
 	bool
 
-# Select if arch init_task must go in the __init_task_data section
-config ARCH_TASK_STRUCT_ON_STACK
-	bool
-
-# Select if arch has its private alloc_task_struct() function
-config ARCH_TASK_STRUCT_ALLOCATOR
+# The architecture has a per-task state that includes the mm's PASID
+config ARCH_HAS_CPU_PASID
 	bool
+	select IOMMU_MM_DATA
 
 config HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	bool
-	depends on !ARCH_TASK_STRUCT_ALLOCATOR
 	help
 	  An architecture should select this to provide hardened usercopy
 	  knowledge about what region of the thread_struct should be
@@ -320,10 +316,6 @@ config HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	  should be implemented. Without this, the entire thread_struct
 	  field in task_struct will be left whitelisted.
 
-# Select if arch has its private alloc_thread_stack() function
-config ARCH_THREAD_STACK_ALLOCATOR
-	bool
-
 # Select if arch wants to size task_struct dynamically via arch_task_struct_size:
 config ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	bool
@@ -681,6 +673,7 @@ config SHADOW_CALL_STACK
 	bool "Shadow Call Stack"
 	depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
 	depends on DYNAMIC_FTRACE_WITH_ARGS || DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	depends on MMU
 	help
 	  This option enables the compiler's Shadow Call Stack, which
 	  uses a shadow stack to protect function return addresses from
@@ -1470,6 +1463,14 @@ config DYNAMIC_SIGFRAME
 config HAVE_ARCH_NODE_DEV_GROUP
 	bool
 
+config ARCH_HAS_HW_PTE_YOUNG
+	bool
+	help
+	  Architectures that select this option are capable of setting the
+	  accessed bit in PTE entries when using them as part of linear address
+	  translations. Architectures that require runtime check should select
+	  this option and override arch_has_hw_pte_young().
+
 config ARCH_HAS_NONLEAF_PMD_YOUNG
 	bool
 	help
diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index 7aeaf7c30a6f..4f47a5003fe8 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -308,7 +308,6 @@ static inline void __iomem *ioremap(unsigned long port, unsigned long size)
 }
 
 #define ioremap_wc ioremap
-#define ioremap_uc ioremap
 
 static inline void iounmap(volatile void __iomem *addr)
 {
@@ -652,12 +651,6 @@ extern void outsl (unsigned long port, const void *src, unsigned long count);
 #define RTC_ALWAYS_BCD	0
 
 /*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
  * These get provided from <asm-generic/iomap.h> since alpha does not
  * select GENERIC_IOMAP.
  */
diff --git a/arch/alpha/include/asm/mmu_context.h b/arch/alpha/include/asm/mmu_context.h
index 4eea7c616992..29a3e3a1f02b 100644
--- a/arch/alpha/include/asm/mmu_context.h
+++ b/arch/alpha/include/asm/mmu_context.h
@@ -183,6 +183,8 @@ ev4_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
 }
 
 extern void __load_new_mm_context(struct mm_struct *);
+asmlinkage void do_page_fault(unsigned long address, unsigned long mmcsr,
+			      long cause, struct pt_regs *regs);
 
 #ifdef CONFIG_SMP
 #define check_mmu_context()					\
diff --git a/arch/alpha/kernel/asm-offsets.c b/arch/alpha/kernel/asm-offsets.c
index b121294bee26..bf1eedd27cf7 100644
--- a/arch/alpha/kernel/asm-offsets.c
+++ b/arch/alpha/kernel/asm-offsets.c
@@ -12,7 +12,7 @@
 #include <linux/kbuild.h>
 #include <asm/io.h>
 
-void foo(void)
+static void __used foo(void)
 {
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
diff --git a/arch/alpha/kernel/rtc.c b/arch/alpha/kernel/rtc.c
index fb3025396ac9..cfdf90bc8b3f 100644
--- a/arch/alpha/kernel/rtc.c
+++ b/arch/alpha/kernel/rtc.c
@@ -80,7 +80,7 @@ init_rtc_epoch(void)
 static int
 alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	int ret = mc146818_get_time(tm);
+	int ret = mc146818_get_time(tm, 10);
 
 	if (ret < 0) {
 		dev_err_ratelimited(dev, "unable to read current time\n");
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
index d6139dbae4ac..feaf89f6936b 100644
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@@ -53,7 +53,7 @@ srmcons_do_receive_chars(struct tty_port *port)
 	do {
 		result.as_long = callback_getc(0);
 		if (result.bits.status < 2) {
-			tty_insert_flip_char(port, (char)result.bits.c, 0);
+			tty_insert_flip_char(port, (u8)result.bits.c, 0);
 			count++;
 		}
 	} while((result.bits.status & 1) && (++loops < 10));
@@ -88,30 +88,27 @@ srmcons_receive_chars(struct timer_list *t)
 }
 
 /* called with callback_lock held */
-static int
-srmcons_do_write(struct tty_port *port, const char *buf, int count)
+static void
+srmcons_do_write(struct tty_port *port, const u8 *buf, size_t count)
 {
-	static char str_cr[1] = "\r";
-	long c, remaining = count;
+	size_t c;
 	srmcons_result result;
-	char *cur;
-	int need_cr;
 
-	for (cur = (char *)buf; remaining > 0; ) {
-		need_cr = 0;
+	while (count > 0) {
+		bool need_cr = false;
 		/* 
 		 * Break it up into reasonable size chunks to allow a chance
 		 * for input to get in
 		 */
-		for (c = 0; c < min_t(long, 128L, remaining) && !need_cr; c++)
-			if (cur[c] == '\n')
-				need_cr = 1;
+		for (c = 0; c < min_t(size_t, 128U, count) && !need_cr; c++)
+			if (buf[c] == '\n')
+				need_cr = true;
 		
 		while (c > 0) {
-			result.as_long = callback_puts(0, cur, c);
+			result.as_long = callback_puts(0, buf, c);
 			c -= result.bits.c;
-			remaining -= result.bits.c;
-			cur += result.bits.c;
+			count -= result.bits.c;
+			buf += result.bits.c;
 
 			/*
 			 * Check for pending input iff a tty port was provided
@@ -121,12 +118,11 @@ srmcons_do_write(struct tty_port *port, const char *buf, int count)
 		}
 
 		while (need_cr) {
-			result.as_long = callback_puts(0, str_cr, 1);
+			result.as_long = callback_puts(0, "\r", 1);
 			if (result.bits.c > 0)
-				need_cr = 0;
+				need_cr = false;
 		}
 	}
-	return count;
 }
 
 static ssize_t
@@ -135,7 +131,7 @@ srmcons_write(struct tty_struct *tty, const u8 *buf, size_t count)
 	unsigned long flags;
 
 	spin_lock_irqsave(&srmcons_callback_lock, flags);
-	srmcons_do_write(tty->port, (const char *) buf, count);
+	srmcons_do_write(tty->port, buf, count);
 	spin_unlock_irqrestore(&srmcons_callback_lock, flags);
 
 	return count;
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
index 18c842ca6c32..8ff110826ce2 100644
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -496,3 +496,8 @@
 564	common	futex_wake			sys_futex_wake
 565	common	futex_wait			sys_futex_wait
 566	common	futex_requeue			sys_futex_requeue
+567	common	statmount			sys_statmount
+568	common	listmount			sys_listmount
+569	common	lsm_get_self_attr		sys_lsm_get_self_attr
+570	common	lsm_set_self_attr		sys_lsm_set_self_attr
+571	common	lsm_list_modules		sys_lsm_list_modules
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index d9a67b370e04..7fc72aeb7398 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -9,6 +9,7 @@
  * This file initializes the trap entry points
  */
 
+#include <linux/cpu.h>
 #include <linux/jiffies.h>
 #include <linux/mm.h>
 #include <linux/sched/signal.h>
diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile
index 1cc74f7b50ef..6a779b9018fd 100644
--- a/arch/alpha/lib/Makefile
+++ b/arch/alpha/lib/Makefile
@@ -4,7 +4,6 @@
 #
 
 asflags-y := $(KBUILD_CFLAGS)
-ccflags-y := -Werror
 
 # Many of these routines have implementations tuned for ev6.
 # Choose them iff we're targeting ev6 specifically.
diff --git a/arch/alpha/mm/Makefile b/arch/alpha/mm/Makefile
index bd770302eb82..101dbd06b4ce 100644
--- a/arch/alpha/mm/Makefile
+++ b/arch/alpha/mm/Makefile
@@ -3,6 +3,4 @@
 # Makefile for the linux alpha-specific parts of the memory manager.
 #
 
-ccflags-y := -Werror
-
 obj-y	:= init.o fault.o
diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h
index 563af3e75f01..329c94cd45d8 100644
--- a/arch/arc/include/asm/cacheflush.h
+++ b/arch/arc/include/asm/cacheflush.h
@@ -40,6 +40,7 @@ void dma_cache_wback(phys_addr_t start, unsigned long sz);
 
 /* TBD: optimize this */
 #define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
 #define flush_cache_dup_mm(mm)			/* called on fork (VIVT only) */
diff --git a/arch/arc/include/asm/jump_label.h b/arch/arc/include/asm/jump_label.h
index 9d9618079739..a339223d9e05 100644
--- a/arch/arc/include/asm/jump_label.h
+++ b/arch/arc/include/asm/jump_label.h
@@ -31,7 +31,7 @@
 static __always_inline bool arch_static_branch(struct static_key *key,
 					       bool branch)
 {
-	asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"	\n"
+	asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"		\n"
 		 "1:							\n"
 		 "nop							\n"
 		 ".pushsection __jump_table, \"aw\"			\n"
@@ -47,7 +47,7 @@ l_yes:
 static __always_inline bool arch_static_branch_jump(struct static_key *key,
 						    bool branch)
 {
-	asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"	\n"
+	asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"		\n"
 		 "1:							\n"
 		 "b %l[l_yes]						\n"
 		 ".pushsection __jump_table, \"aw\"			\n"
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
index 02b53ad811fb..def0dfb95b43 100644
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -85,15 +85,6 @@ typedef struct {
 typedef struct page *pgtable_t;
 
 /*
- * Use virt_to_pfn with caution:
- * If used in pte or paddr related macros, it could cause truncation
- * in PAE40 builds
- * As a rule of thumb, only use it in helpers starting with virt_
- * You have been warned !
- */
-#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
-
-/*
  * When HIGHMEM is enabled we have holes in the memory map so we need
  * pfn_valid() that takes into account the actual extents of the physical
  * memory
@@ -122,6 +113,18 @@ extern int pfn_valid(unsigned long pfn);
 #define __pa(vaddr)  		((unsigned long)(vaddr))
 #define __va(paddr)  		((void *)((unsigned long)(paddr)))
 
+/*
+ * Use virt_to_pfn with caution:
+ * If used in pte or paddr related macros, it could cause truncation
+ * in PAE40 builds
+ * As a rule of thumb, only use it in helpers starting with virt_
+ * You have been warned !
+ */
+static inline unsigned long virt_to_pfn(const void *kaddr)
+{
+	return __pa(kaddr) >> PAGE_SHIFT;
+}
+
 #define virt_to_page(kaddr)	pfn_to_page(virt_to_pfn(kaddr))
 #define virt_addr_valid(kaddr)  pfn_valid(virt_to_pfn(kaddr))
 
diff --git a/arch/arc/include/asm/pgtable-levels.h b/arch/arc/include/asm/pgtable-levels.h
index fc417c75c24d..86e148226463 100644
--- a/arch/arc/include/asm/pgtable-levels.h
+++ b/arch/arc/include/asm/pgtable-levels.h
@@ -159,7 +159,7 @@
 #define pmd_clear(xp)		do { pmd_val(*(xp)) = 0; } while (0)
 #define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
 #define pmd_pfn(pmd)		((pmd_val(pmd) & PAGE_MASK) >> PAGE_SHIFT)
-#define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
+#define pmd_page(pmd)		virt_to_page((void *)pmd_page_vaddr(pmd))
 #define set_pmd(pmdp, pmd)	(*(pmdp) = pmd)
 #define pmd_pgtable(pmd)	((pgtable_t) pmd_page(pmd))
 
diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c
index 2a7fbbb83b70..197707bc7658 100644
--- a/arch/arc/mm/dma.c
+++ b/arch/arc/mm/dma.c
@@ -91,7 +91,7 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
  * Plug in direct dma map ops.
  */
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			const struct iommu_ops *iommu, bool coherent)
+			bool coherent)
 {
 	/*
 	 * IOC hardware snoops all DMA traffic keeping the caches consistent
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f8567e95f98b..0af6709570d1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -35,6 +35,7 @@ config ARM
 	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE
+	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_USE_MEMTEST
@@ -340,83 +341,7 @@ config ARCH_MULTIPLATFORM
 	  Selecting N here allows using those options, including
 	  DEBUG_UNCOMPRESS, XIP_KERNEL and ZBOOT_ROM. If unsure, say Y.
 
-menu "Platform selection"
-	depends on MMU
-
-comment "CPU Core family selection"
-
-config ARCH_MULTI_V4
-	bool "ARMv4 based platforms (FA526, StrongARM)"
-	depends on !ARCH_MULTI_V6_V7
-	# https://github.com/llvm/llvm-project/issues/50764
-	depends on !LD_IS_LLD || LLD_VERSION >= 160000
-	select ARCH_MULTI_V4_V5
-	select CPU_FA526 if !(CPU_SA110 || CPU_SA1100)
-
-config ARCH_MULTI_V4T
-	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
-	depends on !ARCH_MULTI_V6_V7
-	# https://github.com/llvm/llvm-project/issues/50764
-	depends on !LD_IS_LLD || LLD_VERSION >= 160000
-	select ARCH_MULTI_V4_V5
-	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
-		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
-		CPU_ARM925T || CPU_ARM940T)
-
-config ARCH_MULTI_V5
-	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
-		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
-		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
-
-config ARCH_MULTI_V4_V5
-	bool
-
-config ARCH_MULTI_V6
-	bool "ARMv6 based platforms (ARM11)"
-	select ARCH_MULTI_V6_V7
-	select CPU_V6K
-
-config ARCH_MULTI_V7
-	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
-	default y
-	select ARCH_MULTI_V6_V7
-	select CPU_V7
-	select HAVE_SMP
-
-config ARCH_MULTI_V6_V7
-	bool
-	select MIGHT_HAVE_CACHE_L2X0
-
-config ARCH_MULTI_CPU_AUTO
-	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
-	select ARCH_MULTI_V5
-
-endmenu
-
-config ARCH_VIRT
-	bool "Dummy Virtual Machine"
-	depends on ARCH_MULTI_V7
-	select ARM_AMBA
-	select ARM_GIC
-	select ARM_GIC_V2M if PCI
-	select ARM_GIC_V3
-	select ARM_GIC_V3_ITS if PCI
-	select ARM_PSCI
-	select HAVE_ARM_ARCH_TIMER
-
-config ARCH_AIROHA
-	bool "Airoha SoC Support"
-	depends on ARCH_MULTI_V7
-	select ARM_AMBA
-	select ARM_GIC
-	select ARM_GIC_V3
-	select ARM_PSCI
-	select HAVE_ARM_ARCH_TIMER
-	help
-	  Support for Airoha EN7523 SoCs
+source "arch/arm/Kconfig.platforms"
 
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
@@ -429,8 +354,6 @@ source "arch/arm/mach-alpine/Kconfig"
 
 source "arch/arm/mach-artpec/Kconfig"
 
-source "arch/arm/mach-asm9260/Kconfig"
-
 source "arch/arm/mach-aspeed/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
@@ -479,8 +402,6 @@ source "arch/arm/mach-milbeaut/Kconfig"
 
 source "arch/arm/mach-mmp/Kconfig"
 
-source "arch/arm/mach-moxart/Kconfig"
-
 source "arch/arm/mach-mstar/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"
@@ -493,8 +414,6 @@ source "arch/arm/mach-nomadik/Kconfig"
 
 source "arch/arm/mach-npcm/Kconfig"
 
-source "arch/arm/mach-nspire/Kconfig"
-
 source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
@@ -505,8 +424,6 @@ source "arch/arm/mach-pxa/Kconfig"
 
 source "arch/arm/mach-qcom/Kconfig"
 
-source "arch/arm/mach-rda/Kconfig"
-
 source "arch/arm/mach-realtek/Kconfig"
 
 source "arch/arm/mach-rpc/Kconfig"
@@ -529,14 +446,10 @@ source "arch/arm/mach-sti/Kconfig"
 
 source "arch/arm/mach-stm32/Kconfig"
 
-source "arch/arm/mach-sunplus/Kconfig"
-
 source "arch/arm/mach-sunxi/Kconfig"
 
 source "arch/arm/mach-tegra/Kconfig"
 
-source "arch/arm/mach-uniphier/Kconfig"
-
 source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
@@ -1362,7 +1275,7 @@ config ARCH_FORCE_MAX_ORDER
 	default "10"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index fc2b41d41447..5fbbac1b708b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1809,15 +1809,8 @@ config DEBUG_UNCOMPRESS
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
 		     !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
 	help
-	  This option influences the normal decompressor output for
-	  multiplatform kernels.  Normally, multiplatform kernels disable
-	  decompressor output because it is not possible to know where to
-	  send the decompressor output.
-
-	  When this option is set, the selected DEBUG_LL output method
-	  will be re-used for normal decompressor output on multiplatform
-	  kernels.
-	  
+	  Say Y here to enable debug output in the decompressor code, using
+	  the selected DEBUG_LL output method.
 
 config UNCOMPRESS_INCLUDE
 	string
diff --git a/arch/arm/Kconfig.platforms b/arch/arm/Kconfig.platforms
new file mode 100644
index 000000000000..845ab08e20a4
--- /dev/null
+++ b/arch/arm/Kconfig.platforms
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menu "Platform selection"
+	depends on MMU
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+	bool "ARMv4 based platforms (FA526, StrongARM)"
+	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
+	select ARCH_MULTI_V4_V5
+	select CPU_FA526 if !(CPU_SA110 || CPU_SA1100)
+
+config ARCH_MULTI_V4T
+	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
+		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
+		CPU_ARM925T || CPU_ARM940T)
+
+config ARCH_MULTI_V5
+	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
+		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
+		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
+
+config ARCH_MULTI_V4_V5
+	bool
+
+config ARCH_MULTI_V6
+	bool "ARMv6 based platforms (ARM11)"
+	select ARCH_MULTI_V6_V7
+	select CPU_V6K
+
+config ARCH_MULTI_V7
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+	default y
+	select ARCH_MULTI_V6_V7
+	select CPU_V7
+	select HAVE_SMP
+
+config ARCH_MULTI_V6_V7
+	bool
+	select MIGHT_HAVE_CACHE_L2X0
+
+config ARCH_MULTI_CPU_AUTO
+	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+	select ARCH_MULTI_V5
+
+endmenu
+
+config ARCH_VIRT
+	bool "Dummy Virtual Machine"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V2M if PCI
+	select ARM_GIC_V3
+	select ARM_GIC_V3_ITS if PCI
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Support for Airoha EN7523 SoCs
+
+config MACH_ASM9260
+	bool "Alphascale ASM9260"
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
+	select ASM9260_TIMER
+	help
+	  Support for Alphascale ASM9260 based platform.
+
+menuconfig ARCH_MOXART
+	bool "MOXA ART SoC"
+	depends on ARCH_MULTI_V4
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_FA526
+	select ARM_DMA_MEM_BUFFERABLE
+	select FARADAY_FTINTC010
+	select FTTMR010_TIMER
+	select GPIOLIB
+	select PHYLIB if NETDEVICES
+	help
+	  Say Y here if you want to run your kernel on hardware with a
+	  MOXA ART SoC.
+	  The MOXA ART SoC is based on a Faraday FA526 ARMv4 32-bit
+	  192 MHz CPU with MMU and 16KB/8KB D/I-cache (UC-7112-LX).
+	  Used on models UC-7101, UC-7112/UC-7110, IA240/IA241, IA3341.
+
+if ARCH_MOXART
+
+config MACH_UC7112LX
+	bool "MOXA UC-7112-LX"
+	depends on ARCH_MOXART
+	help
+	  Say Y here if you intend to run this kernel on a MOXA
+	  UC-7112-LX embedded computer.
+
+endif
+
+config ARCH_NSPIRE
+	bool "TI-NSPIRE based"
+	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
+	select GENERIC_IRQ_CHIP
+	select ARM_AMBA
+	select ARM_VIC
+	select ARM_TIMER_SP804
+	select NSPIRE_TIMER
+	select POWER_RESET
+	select POWER_RESET_SYSCON
+	help
+	  This enables support for systems using the TI-NSPIRE CPU
+
+config ARCH_RDA
+	bool "RDA Micro SoCs"
+	depends on ARCH_MULTI_V7
+	select RDA_INTC
+	select RDA_TIMER
+	help
+	  This enables support for the RDA Micro 8810PL SoC family.
+
+menuconfig ARCH_SUNPLUS
+	bool "Sunplus SoCs"
+	depends on ARCH_MULTI_V7
+	help
+	  Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
+	  such as the Banana Pi BPI-F2S development board (and derivatives).
+	  (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
+	  (<https://tibbo.com/store/plus1.html>)
+
+if ARCH_SUNPLUS
+
+config SOC_SP7021
+	bool "Sunplus SP7021 SoC support"
+	default ARCH_SUNPLUS
+	select HAVE_ARM_ARCH_TIMER
+	select ARM_GIC
+	select ARM_PSCI
+	select PINCTRL
+	select PINCTRL_SPPCTL
+	select SERIAL_SUNPLUS if TTY
+	select SERIAL_SUNPLUS_CONSOLE if TTY
+	help
+	  Support for Sunplus SP7021 SoC. It is based on ARM 4-core
+	  Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
+	  Ethernet, etc.), FPGA interface,  chip-to-chip bus.
+	  It is designed for industrial control.
+
+endif
+
+config ARCH_UNIPHIER
+	bool "Socionext UniPhier SoCs"
+	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_AMBA
+	select ARM_GLOBAL_TIMER
+	select ARM_GIC
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select PINCTRL
+	select RESET_CONTROLLER
+	help
+	  Support for UniPhier SoC family developed by Socionext Inc.
+	  (formerly, System LSI Business Division of Panasonic Corporation)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5ba42f69f8ce..473280d5adce 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -167,7 +167,6 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_ACTIONS)		+= actions
-machine-$(CONFIG_ARCH_AIROHA)		+= airoha
 machine-$(CONFIG_ARCH_ALPINE)		+= alpine
 machine-$(CONFIG_ARCH_ARTPEC)		+= artpec
 machine-$(CONFIG_ARCH_ASPEED)           += aspeed
@@ -192,7 +191,6 @@ machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
-machine-$(CONFIG_ARCH_MOXART)		+= moxart
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_MXC)		+= imx
@@ -202,7 +200,6 @@ machine-$(CONFIG_ARCH_MXS)		+= mxs
 machine-$(CONFIG_ARCH_MSTARV7)		+= mstar
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
 machine-$(CONFIG_ARCH_NPCM)		+= npcm
-machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
@@ -218,7 +215,6 @@ machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
 machine-$(CONFIG_ARCH_INTEL_SOCFPGA)	+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32
-machine-$(CONFIG_ARCH_SUNPLUS)		+= sunplus
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U8500)		+= ux500
diff --git a/arch/arm/boot/dts/amazon/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi
index ff68dfb4eb78..90bd12feac01 100644
--- a/arch/arm/boot/dts/amazon/alpine.dtsi
+++ b/arch/arm/boot/dts/amazon/alpine.dtsi
@@ -167,7 +167,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <96>;
 			al,msi-num-spis = <64>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
index e899de681f47..5be0e8fd2633 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -45,8 +45,8 @@
 		num-chipselects = <1>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
index a677c827e758..5a8169bbda87 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -80,8 +80,8 @@
 		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index 3f6010ef2b86..213023bc5aec 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -456,7 +456,7 @@
 	status = "okay";
 
 	tpm: tpm@2e {
-		compatible = "tcg,tpm-tis-i2c";
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
 		reg = <0x2e>;
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 530491ae5eb2..857cb26ed6d7 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -466,7 +466,6 @@
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -482,7 +481,6 @@
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -498,7 +496,6 @@
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -515,7 +512,6 @@
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -532,7 +528,6 @@
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -549,7 +544,6 @@
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -566,7 +560,6 @@
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -583,7 +576,6 @@
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -600,7 +592,6 @@
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -617,7 +608,6 @@
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -634,7 +624,6 @@
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -651,7 +640,6 @@
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -668,7 +656,6 @@
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -685,7 +672,6 @@
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index 04f98d1dbb97..e6f3cf3c721e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -363,6 +363,7 @@
 				interrupts = <40>;
 				reg = <0x1e780200 0x0100>;
 				clocks = <&syscon ASPEED_CLK_APB>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -594,7 +595,6 @@
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -610,7 +610,6 @@
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -626,7 +625,6 @@
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -643,7 +641,6 @@
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -660,7 +657,6 @@
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -677,7 +673,6 @@
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -694,7 +689,6 @@
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -711,7 +705,6 @@
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -728,7 +721,6 @@
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -745,7 +737,6 @@
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -762,7 +753,6 @@
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -779,7 +769,6 @@
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -796,7 +785,6 @@
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -813,7 +801,6 @@
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index c4d1faade8be..29f94696d8b1 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -474,6 +474,7 @@
 				reg = <0x1e780500 0x100>;
 				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -488,6 +489,7 @@
 				reg = <0x1e780600 0x100>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -902,7 +904,6 @@
 	i2c0: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x80 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -917,7 +918,6 @@
 	i2c1: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x100 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -932,7 +932,6 @@
 	i2c2: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x180 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -947,7 +946,6 @@
 	i2c3: i2c-bus@200 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x200 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -962,7 +960,6 @@
 	i2c4: i2c-bus@280 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x280 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -977,7 +974,6 @@
 	i2c5: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x300 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -992,7 +988,6 @@
 	i2c6: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x380 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1007,7 +1002,6 @@
 	i2c7: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x400 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1022,7 +1016,6 @@
 	i2c8: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x480 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1037,7 +1030,6 @@
 	i2c9: i2c-bus@500 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x500 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1052,7 +1044,6 @@
 	i2c10: i2c-bus@580 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x580 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1067,7 +1058,6 @@
 	i2c11: i2c-bus@600 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x600 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1082,7 +1072,6 @@
 	i2c12: i2c-bus@680 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x680 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1097,7 +1086,6 @@
 	i2c13: i2c-bus@700 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x700 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1112,7 +1100,6 @@
 	i2c14: i2c-bus@780 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x780 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1127,7 +1114,6 @@
 	i2c15: i2c-bus@800 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x800 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
diff --git a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
index 31590d3186a2..00e5887c926f 100644
--- a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -35,8 +35,8 @@
 		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
 		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
index f9f79ed82518..07ca0d993c9f 100644
--- a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
@@ -167,6 +167,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&mailbox>;
 			interrupts = <0>;
 		};
@@ -247,6 +248,7 @@
 			gpio-controller;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		i2c1: i2c@1800b000 {
@@ -518,6 +520,7 @@
 			gpio-controller;
 
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 42 1>,
 					<&pinctrl 1 44 3>,
diff --git a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
index 788a6806191a..75545b10ef2f 100644
--- a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
@@ -200,6 +200,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
index 9d20ba3b1ffb..6a4482c93167 100644
--- a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
@@ -180,6 +180,7 @@
 			gpio-controller;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 0 32>;
 		};
@@ -352,6 +353,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
index 98817a6675b9..d233a191c139 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
 
+#include <dt-bindings/power/raspberrypi-power.h>
 #include <dt-bindings/reset/raspberrypi,firmware-reset.h>
 
 / {
@@ -76,3 +77,7 @@
 &vchiq {
 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&xhci {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
index 4a379a14966d..22c7f1561344 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -604,6 +604,20 @@
 			};
 		};
 
+		xhci: usb@7e9c0000 {
+			compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2";
+			reg = <0x0 0x7e9c0000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			/* DWC2 and this IP block share the same USB PHY,
+			 * enabling both at the same time results in lockups.
+			 * So keep this node disabled and let the bootloader
+			 * decide which interface should be enabled.
+			 */
+			status = "disabled";
+		};
+
 		v3d: gpu@7ec00000 {
 			compatible = "brcm,2711-v3d";
 			reg = <0x0 0x7ec00000 0x4000>,
diff --git a/arch/arm/boot/dts/broadcom/bcm63138.dtsi b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
index 93281c47c9ba..4ef02283612b 100644
--- a/arch/arm/boot/dts/broadcom/bcm63138.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
@@ -232,6 +232,12 @@
 			interrupt-names = "nand";
 		};
 
+		serial@4400 {
+			compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart";
+			reg = <0x4400 0x1e0>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		bootlut: bootlut@8000 {
 			compatible = "brcm,bcm63138-bootlut";
 			reg = <0x8000 0x50>;
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
index 4d70f6afd13a..6d5e69035f94 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
@@ -60,6 +60,8 @@
 			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
 			 * each handling all IRQs.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
index 9ec0169bacf8..5f4c849915db 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
@@ -89,6 +89,8 @@
 			 * The slots have Ethernet, Ethernet, NEC and MPCI.
 			 * The IDSELs are 11, 12, 13, 14.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 11 - Ethernet A */
 			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
index 90fd51b36e7d..2c89db34c8d8 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
@@ -165,6 +165,24 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				/*
+				 * PHY 0..4 are internal to the MV88E6060 switch but appear
+				 * as independent devices.
+				 */
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+
+				/* Altima AMI101L used by the WAN port */
 				phy9: ethernet-phy@9 {
 					reg = <9>;
 				};
@@ -181,21 +199,25 @@
 						port@0 {
 							reg = <0>;
 							label = "lan1";
+							phy-handle = <&phy0>;
 						};
 
 						port@1 {
 							reg = <1>;
 							label = "lan2";
+							phy-handle = <&phy1>;
 						};
 
 						port@2 {
 							reg = <2>;
 							label = "lan3";
+							phy-handle = <&phy2>;
 						};
 
 						port@3 {
 							reg = <3>;
 							label = "lan4";
+							phy-handle = <&phy3>;
 						};
 
 						port@5 {
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
index 4c1d140f40f8..35be14150f41 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
@@ -768,7 +768,7 @@
 			status = "disabled";
 		};
 
-		nand0: nand@ff900000 {
+		nand0: nand-controller@ff900000 {
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 			compatible = "altr,socfpga-denali-nand";
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
index f36063c57c7f..6b6e77596ffa 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
@@ -669,7 +669,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@ffb90000 {
+		nand: nand-controller@ffb90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-denali-nand";
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
index 11ccdc6c2dc6..0434f1c7b665 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
@@ -17,8 +17,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <3>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
index c48385702a85..7342f5942b0d 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
@@ -124,8 +124,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
index c7f5fa0ba0f2..d37a982e8571 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
@@ -129,8 +129,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
index 3dd99c7c95e0..9e4db7407f1a 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
@@ -174,8 +174,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
index 2564671fc1c6..ce0d6514eeb5 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -121,8 +121,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
index e0630b0eed03..65f390bf8975 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
@@ -229,8 +229,6 @@
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
 
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
@@ -246,8 +244,6 @@
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
 
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/marvell/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts
index b459a670f615..f23f6b3fc8f3 100644
--- a/arch/arm/boot/dts/marvell/armada-370-rd.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts
@@ -95,7 +95,7 @@
 			gpio-fan {
 				compatible = "gpio-fan";
 				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-				gpio-fan,speed-map = <0 0 3000 1>;
+				gpio-fan,speed-map = <0 0>, <3000 1>;
 				pinctrl-0 = <&fan_pins>;
 				pinctrl-names = "default";
 			};
@@ -149,39 +149,37 @@
 		};
 	};
 
-	switch: switch@10 {
+	switch: ethernet-switch@10 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0x10>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
@@ -196,25 +194,25 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switchphy0: switchphy@0 {
+			switchphy0: ethernet-phy@0 {
 				reg = <0>;
 				interrupt-parent = <&switch>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy1: switchphy@1 {
+			switchphy1: ethernet-phy@1 {
 				reg = <1>;
 				interrupt-parent = <&switch>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy2: switchphy@2 {
+			switchphy2: ethernet-phy@2 {
 				reg = <2>;
 				interrupt-parent = <&switch>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy3: switchphy@3 {
+			switchphy3: ethernet-phy@3 {
 				reg = <3>;
 				interrupt-parent = <&switch>;
 				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
index 8dd242e668e6..6ec3dd3337f4 100644
--- a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
@@ -25,9 +25,9 @@
 
 	gpio-fan {
 		gpio-fan,speed-map =
-			<   0 3
-			  950 2
-			 1400 1
-			 1800 0>;
+			<   0 3>,
+			< 950 2>,
+			<1400 1>,
+			<1800 0>;
 	};
 };
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
index 370ca9c43247..3011578a3124 100644
--- a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
@@ -106,10 +106,10 @@
 
 	gpio-fan {
 		gpio-fan,speed-map =
-			<   0 3
-			  800 2
-			  1050 1
-			  1300 0>;
+			<   0 3>,
+			< 800 2>,
+			<1050 1>,
+			<1300 0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
index b07d11d1f124..02599a3e9816 100644
--- a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
@@ -113,14 +113,14 @@
 			 &gpio2  0 GPIO_ACTIVE_HIGH
 			 &gpio2  1 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       1000 1
-				       1150 2
-				       1350 4
-				       1500 3
-				       1650 5
-				       1750 6
-				       1900 7 >;
+		gpio-fan,speed-map = <   0 0>,
+				     <1000 1>,
+				     <1150 2>,
+				     <1350 4>,
+				     <1500 3>,
+				     <1650 5>,
+				     <1750 6>,
+				     <1900 7>;
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
index f4c4b213ef4e..5baf83e5253d 100644
--- a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
+++ b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
@@ -77,51 +77,49 @@
 	pinctrl-0 = <&mdio_pins>;
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio1>;
 		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&switch_interrupt_pins>;
 		pinctrl-names = "default";
-		#size-cells = <0>;
 		reg = <0>;
 
 		mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -142,11 +140,11 @@
 			};
 		};
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				ethernet = <&eth0>;
 				phy-mode = "rgmii";
 				reg = <0>;
@@ -158,55 +156,55 @@
 				};
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 				reg = <1>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				label = "lan2";
 				phy-handle = <&switch0phy2>;
 				reg = <2>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 				reg = <3>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				label = "lan4";
 				phy-handle = <&switch0phy4>;
 				reg = <4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				label = "lan5";
 				phy-handle = <&switch0phy5>;
 				reg = <5>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				label = "lan6";
 				phy-handle = <&switch0phy6>;
 				reg = <6>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				label = "lan7";
 				phy-handle = <&switch0phy7>;
 				reg = <7>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				label = "lan8";
 				phy-handle = <&switch0phy8>;
 				reg = <8>;
 			};
 
-			port@9 {
+			ethernet-port@9 {
 				/* 88X3310P external phy */
 				label = "lan9";
 				phy-handle = <&phy1>;
@@ -214,7 +212,7 @@
 				reg = <9>;
 			};
 
-			port@a {
+			ethernet-port@a {
 				/* 88X3310P external phy */
 				label = "lan10";
 				phy-handle = <&phy2>;
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
index 1990f7d0cc79..1707d1b01545 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -7,66 +7,66 @@
 };
 
 &mdio {
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6190";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
 		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan8";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan7";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan6";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan5";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "lan4";
 				phy-handle = <&switch0phy4>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				label = "lan3";
 				phy-handle = <&switch0phy5>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				reg = <7>;
 				label = "lan2";
 				phy-handle = <&switch0phy6>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				reg = <8>;
 				label = "lan1";
 				phy-handle = <&switch0phy7>;
 			};
 
-			port@10 {
+			ethernet-port@10 {
 				reg = <10>;
 				phy-mode = "2500base-x";
 
@@ -83,35 +83,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@1 {
+			switch0phy0: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy1: switch0phy1@2 {
+			switch0phy1: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy2: switch0phy2@3 {
+			switch0phy2: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy3: switch0phy3@4 {
+			switch0phy3: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy4: switch0phy4@5 {
+			switch0phy4: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy5: switch0phy5@6 {
+			switch0phy5: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy6: switch0phy6@7 {
+			switch0phy6: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy7: switch0phy7@8 {
+			switch0phy7: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
index b795ad573891..a7678a784c18 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
@@ -11,42 +11,42 @@
 };
 
 &mdio {
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
 		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan2";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan4";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "2500base-x";
 				ethernet = <&eth1>;
@@ -63,19 +63,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy3: switch0phy3@14 {
+			switch0phy3: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
index fc8216fd9f60..4116ed60f709 100644
--- a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
@@ -158,42 +158,40 @@
 &mdio {
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan4";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan3";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "wan";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "sgmii";
 				ethernet = <&eth2>;
diff --git a/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
index ea91ff964d94..6caa5c50175a 100644
--- a/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
@@ -131,14 +131,14 @@
 			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
 				<&gpio1 17 GPIO_ACTIVE_HIGH>,
 				<&gpio1 16 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <   0 0
-					      1500 1
-					      2500 2
-					      3000 3
-					      3400 4
-					      3700 5
-					      3900 6
-					      4000 7>;
+			gpio-fan,speed-map = <   0 0>,
+					     <1500 1>,
+					     <2500 2>,
+					     <3000 3>,
+					     <3400 4>,
+					     <3700 5>,
+					     <3900 6>,
+					     <4000 7>;
 			#cooling-cells = <2>;
 		};
 
diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
index 2d8d319bec83..7b755bb4e4e7 100644
--- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
@@ -435,12 +435,10 @@
 	};
 
 	/* Switch MV88E6176 at address 0x10 */
-	switch@10 {
+	ethernet-switch@10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&swint_pins>;
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		dsa,member = <0 0>;
 		reg = <0x10>;
@@ -448,36 +446,36 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			ports@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			ports@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 			};
 
-			ports@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			ports@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 			};
 
-			ports@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan4";
 			};
 
-			ports@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
@@ -488,7 +486,7 @@
 				};
 			};
 
-			ports@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				ethernet = <&eth0>;
 				phy-mode = "rgmii-id";
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
index 32c569df142f..3290ccad2374 100644
--- a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
@@ -92,44 +92,42 @@
 &mdio {
 	status = "okay";
 
-	switch@4 {
+	ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <4>;
 		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
 		pinctrl-names = "default";
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan5";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan4";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan3";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan2";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan1";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "1000base-x";
@@ -140,7 +138,7 @@
 				};
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				/* 88E1512 external phy */
 				reg = <6>;
 				label = "lan6";
diff --git a/arch/arm/boot/dts/marvell/armada-388-gp.dts b/arch/arm/boot/dts/marvell/armada-388-gp.dts
index e2ba50520b6b..1de0a172aa5f 100644
--- a/arch/arm/boot/dts/marvell/armada-388-gp.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-gp.dts
@@ -237,8 +237,8 @@
 		gpio-fan {
 			compatible = "gpio-fan";
 			gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <	 0 0
-					      3000 1>;
+			gpio-fan,speed-map = <	 0 0>,
+					     <3000 1>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
index 7a0614fd0c93..ea859f7ea042 100644
--- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
@@ -265,42 +265,40 @@
 &mdio {
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan4";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan3";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "internet";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "rgmii-id";
 				ethernet = <&eth0>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
index eb917462b219..0738eb679fcd 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
@@ -38,9 +38,9 @@
 		pinctrl-names = "default";
 		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
 			 &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0    0
-				      3000 1
-				      6000 2>;
+		gpio-fan,speed-map = <0    0>,
+				     <3000 1>,
+				     <6000 2>;
 	};
 
 	gpio_poweroff {
diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
index dffb9f84e67c..c841eb8e7fb1 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
@@ -65,6 +65,7 @@
 			gpio2: gpio-expander@20 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x20>;
 
@@ -79,6 +80,7 @@
 			gpio3: gpio-expander@21 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x21>;
 
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
index 377b6e970259..dfac2045a1eb 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
@@ -118,10 +118,11 @@
 		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
 			 &gpio0 16 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 
 		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
index c6024b569423..0425df8cb91c 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
@@ -69,10 +69,11 @@
 		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
 			 &gpio1 15 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
index 88b70ba1c8fe..f80af24b9e90 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
@@ -172,10 +172,11 @@
 		pinctrl-names = "default";
 		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
 		         &gpio0 18 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map = <0    3
-		                      1500 2
-		                      3250 1
-		                      5000 0>;
+		gpio-fan,speed-map =
+				<0    3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
index c0a087e77408..044958bc55da 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
@@ -29,15 +29,15 @@
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 1500 15
-			 1700 14
-			 1800 13
-			 2100 12
-			 3100 11
-			 3300 10
-			 4300  9
-			 5500  8>;
+			<   0  0>,
+			<1500 15>,
+			<1700 14>,
+			<1800 13>,
+			<2100 12>,
+			<3100 11>,
+			<3300 10>,
+			<4300  9>,
+			<5500  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
index 5b9fa14b6428..3fbe008f9141 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
@@ -30,15 +30,15 @@
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 3000 15
-			 3180 14
-			 4140 13
-			 4570 12
-			 6760 11
-			 7140 10
-			 7980  9
-			 9200  8>;
+			<   0  0>,
+			<3000 15>,
+			<3180 14>,
+			<4140 13>,
+			<4570 12>,
+			<6760 11>,
+			<7140 10>,
+			<7980  9>,
+			<9200  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
index 9b6666020cdd..20964eb48fd7 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
@@ -286,14 +286,15 @@
 		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-150-15-18 {
@@ -306,14 +307,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-100-32-35 {
@@ -326,14 +328,15 @@
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-18 {
@@ -346,14 +349,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-1 {
@@ -366,14 +370,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-3 {
@@ -388,14 +393,15 @@
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
 			       &gpio1 12 GPIO_ACTIVE_HIGH
 			       &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-leds-alarm-12 {
diff --git a/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
index e172029a0c4d..a260c42dbda3 100644
--- a/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
+++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
@@ -50,10 +50,10 @@
 		pinctrl-names = "default";
 
 		gpio-fan,speed-map =
-			<0		3
-			1500	2
-			3250	1
-			5000	0>;
+			<   0 3>,
+			<1500 2>,
+			<3250 1>,
+			<5000 0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
index 83372c1f291b..c6fbdd29019f 100644
--- a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
@@ -249,6 +249,8 @@
 
 	ethernet-phy@0 {
 		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -353,6 +355,7 @@
 				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
 				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
 				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
 				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
 				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
 		};
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
index 5cd593028aff..f3cbb675cea4 100644
--- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
@@ -292,6 +292,8 @@
 
 	ethernet-phy@0 {
 		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -465,6 +467,7 @@
 				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
 				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
 				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
 				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
 				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
 		};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
index d0a6dbd377df..f3ffb8f01d8a 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
@@ -54,7 +54,6 @@
 
 		sdmmc0: sdio-host@a0000000 {
 			bus-width = <8>;
-			mmc-ddr-3_3v;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
 			status = "okay";
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
index e055b9e2fe34..15239834d886 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -197,7 +197,6 @@
 
 &sdmmc0 {
 	bus-width = <4>;
-	mmc-ddr-3_3v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
index fd671c7a1e5d..6e1f0f164cb4 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -120,6 +120,7 @@
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
 					     <3 IRQ_TYPE_LEVEL_HIGH>,
 					     <4 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
@@ -128,6 +129,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
diff --git a/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
index 16b374e6482f..8c1d5c9fa483 100644
--- a/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
@@ -446,7 +446,7 @@
 	tegra_ac97: ac97@70002000 {
 		status = "okay";
 		nvidia,codec-reset-gpio =
-			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 		nvidia,codec-sync-gpio =
 			<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
index 1640763fd4af..ff0d684622f7 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
@@ -997,7 +997,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
index 3b6fad273cab..d38f1dd38a90 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
@@ -980,7 +980,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
index 4eb526fe9c55..81c8a5fd92cc 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
@@ -861,7 +861,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx1-ads.dts b/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
index 5833fb6f15d8..2c817c4a4c68 100644
--- a/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
@@ -65,7 +65,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <4>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
index 1f11e9542a72..e66eef87a7a4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
@@ -45,7 +45,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx1.dtsi b/arch/arm/boot/dts/nxp/imx/imx1.dtsi
index e312f1e74e2f..1ac10965fdfd 100644
--- a/arch/arm/boot/dts/nxp/imx/imx1.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx1.dtsi
@@ -68,7 +68,7 @@
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi@200000 {
+		bus@200000 {
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -155,7 +155,7 @@
 			};
 		};
 
-		aipi@210000 {
+		bus@210000 {
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -268,9 +268,12 @@
 			status = "disabled";
 		};
 
-		esram: esram@300000 {
+		esram: sram@300000 {
 			compatible = "mmio-sram";
 			reg = <0x00300000 0x20000>;
+			ranges = <0 0x00300000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
index 0703f62d10d1..93a6e4e680b4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
@@ -27,7 +27,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
index fc8a502fc957..6cddb2cc36fe 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&qvga_timings>;
-			qvga_timings: 320x240 {
+			qvga_timings: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
index 80a7f96de4c6..64b2ffac463b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_svga_timings>;
-			dvi_svga_timings: 800x600 {
+			dvi_svga_timings: timing0 {
 				clock-frequency = <40000000>;
 				hactive = <800>;
 				vactive = <600>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index 24027a1fb46d..fb074bfdaa8d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_vga_timings>;
-			dvi_vga_timings: 640x480 {
+			dvi_vga_timings: timing0 {
 				clock-frequency = <31250000>;
 				hactive = <640>;
 				vactive = <480>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
index 04f4b127a172..dd176fb54e58 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
@@ -68,7 +68,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&wvga_timings>;
-			wvga_timings: 640x480 {
+			wvga_timings: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <45>;
@@ -122,6 +122,7 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks 129>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
index 534c70b8d79d..9cfff2151b7e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
@@ -68,6 +68,16 @@
 		};
 	};
 
+	usbphy0: usb-phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	usbphy1: usb-phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -93,7 +103,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f80000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <3>;
 				status = "disabled";
 			};
@@ -104,7 +114,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f84000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <10>;
 				status = "disabled";
 			};
@@ -151,7 +161,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f98000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <4>;
 				status = "disabled";
 			};
@@ -178,12 +188,9 @@
 			};
 
 			kpp: kpp@43fa8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
 				reg = <0x43fa8000 0x4000>;
 				clocks = <&clks 102>;
-				clock-names = "";
 				interrupts = <24>;
 				status = "disabled";
 			};
@@ -542,7 +549,7 @@
 			};
 
 			iim: efuse@53ff0000 {
-				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx25-iim";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <19>;
 				clocks = <&clks 99>;
@@ -597,7 +604,7 @@
 			#size-cells = <1>;
 		};
 
-		emi@80000000 {
+		bus@80000000 {
 			compatible = "fsl,emi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -617,22 +624,4 @@
 			};
 		};
 	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usb-phy@0 {
-			reg = <0>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-
-		usbphy1: usb-phy@1 {
-			reg = <1>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
index a21f1f7c24b8..849306cb4532 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
@@ -16,7 +16,7 @@
 		fsl,pcr = <0xfae80083>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 800x480 {
+			timing0: timing0 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
 				vactive = <480>;
@@ -47,7 +47,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
index 74110bbcd9d4..c7e923584878 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
@@ -33,7 +33,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
@@ -90,7 +90,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
index 145e459625b3..d78793601306 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -16,7 +16,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 320x240 {
+			timing0: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
index 35123b7cb6b3..21d436972aa4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
@@ -14,18 +14,12 @@
 		reg = <0xa0000000 0x08000000>;
 	};
 
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+
+	usbphy0: usbphy {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
index 25442eba21c1..27c93b9fe049 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
@@ -19,7 +19,7 @@
 		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 640x480 {
+			timing0: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <112>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
index 7f0cd4d3ec2d..b8048e12e3d9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
@@ -19,7 +19,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 240x320 {
+			timing0: timing0 {
 				clock-frequency = <5500000>;
 				hactive = <240>;
 				vactive = <320>;
@@ -48,15 +48,12 @@
 		regulator-always-on;
 	};
 
-	usbphy {
-		usbphy2: usbphy@2 {
-			compatible = "usb-nop-xceiv";
-			reg = <2>;
-			vcc-supply = <&reg_5v0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+	usbphy2: usbphy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_5v0>;
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
index 7b2ea4cdae58..e958d7286ae9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -29,19 +29,13 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			vcc-supply = <&sw3_reg>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+
+	usbphy0: usbphy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&sw3_reg>;
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
@@ -49,12 +43,12 @@
 	status = "okay";
 
 	/* SSI0 <=> PINS_4 (MC13783 Audio) */
-	ssi0 {
+	mux-ssi0 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <0xcb205000>;
 	};
 
-	pins4 {
+	mux-pins4 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <0x00001000>;
 	};
@@ -186,7 +180,7 @@
 		reg = <0x52>;
 	};
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
@@ -314,7 +308,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi
index faba12ee7465..ec472695c71e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi
@@ -81,7 +81,7 @@
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi1: aipi@10000000 { /* AIPI1 */
+		aipi1: bus@10000000 { /* AIPI1 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -453,7 +453,7 @@
 			};
 		};
 
-		aipi2: aipi@10020000 { /* AIPI2 */
+		aipi2: bus@10020000 { /* AIPI2 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -588,6 +588,9 @@
 		iram: sram@ffff4c00 {
 			compatible = "mmio-sram";
 			reg = <0xffff4c00 0xb400>;
+			ranges = <0 0xffff4c00 0xb400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
index 055d23a9aee7..0814f5665a59 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
@@ -22,7 +22,7 @@
 	};
 
 	display-0 {
-		#address-cells =<1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "fsl,imx-parallel-display";
 		interface-pix-fmt = "rgb24";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
index 7d4ae113c381..63cdf24eb397 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
@@ -22,7 +22,7 @@
 		compatible = "ilitek,ili251x";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
index 9c5938e16d99..2e75d700efdb 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
@@ -22,7 +22,7 @@
 		compatible = "ilitek,ili251x";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
index 01df7cffcef2..94625d5d5918 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h60";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
index a015453daf10..b3cfa8110ade 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h60";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
index b71ee6b79208..7edc788bcb8f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h84";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		touchscreen-inverted-x;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
index 717decda0ceb..3ac7a4501620 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
@@ -76,6 +76,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_enable_can1_power>;
 		regulator-name = "can1_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_can2_supply: regulator-can2-supply {
@@ -85,6 +86,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_enable_can2_power>;
 		regulator-name = "can2_supply";
+		startup-delay-us = <1000>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
index db8c332df6a1..cad112e05475 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
@@ -227,7 +227,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 
 		bridge@2,1 {
 			compatible = "pci10b5,8605";
@@ -235,7 +234,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			ethernet@3,0 {
@@ -250,7 +248,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			switch_nic: ethernet@4,0 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
index 99f4f6ac71d4..c1ae7c47b442 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
@@ -245,6 +245,7 @@
 				reg = <0x74>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				interrupt-parent = <&gpio2>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -390,7 +391,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
index 6f9d094dd6d0..18a620832a2a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
@@ -16,7 +16,7 @@
 	compatible = "variscite,mx6customboard", "variscite,var-som-imx6q", "fsl,imx6q";
 
 	panel0: lvds-panel0 {
-		compatible =  "panel-lvds";
+		compatible = "panel-lvds";
 		backlight = <&backlight_lvds>;
 		width-mm = <152>;
 		height-mm = <91>;
@@ -43,7 +43,7 @@
 	};
 
 	panel1: lvds-panel1 {
-		compatible =  "panel-lvds";
+		compatible = "panel-lvds";
 		width-mm = <152>;
 		height-mm = <91>;
 		data-mapping = "jeida-18";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
index 4cc965277c52..ea40623d12e5 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -12,6 +12,13 @@
 	model = "Toradex Apalis iMX6Q/D Module";
 	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
 
+	aliases {
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC1 slot */
+		mmc2 = &usdhc2; /* SD1 slot */
+		/delete-property/ mmc3;
+	};
+
 	/* Will be filled by the bootloader */
 	memory@10000000 {
 		device_type = "memory";
@@ -166,7 +173,7 @@
 	reg_usb_host_vbus: regulator-usb-host-vbus {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
 		regulator-max-microvolt = <5000000>;
@@ -619,7 +626,6 @@
 		blocks = <0x5>;
 		id = <0>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 		interrupt-parent = <&gpio4>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
index 11d9c7a2dacb..d3a7a6eeb8e0 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
@@ -12,6 +12,13 @@
 	model = "Toradex Colibri iMX6DL/S Module";
 	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
 
+	aliases {
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC/SD Slot */
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		brightness-levels = <0 45 63 88 119 158 203 255>;
@@ -543,7 +550,6 @@
 		blocks = <0x5>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio6>;
-		interrupt-controller;
 		id = <0>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
index f1a41c76729c..5587069b6052 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
@@ -54,7 +54,7 @@
 	clk_codec: clock-codec {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency  = <12000000>;
+		clock-frequency = <12000000>;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
index a63e73adc1fc..42b2ba23aefc 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -225,7 +225,6 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
index da0f8dae1ea8..4d2abcd44eff 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
@@ -500,21 +500,21 @@
 
 	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
 		>;
 	};
 
 	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
 		>;
 	};
 
 	pinctrl_pwm4: pwm4grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
 		>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
index 113974520d54..c0c47adc5866 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
@@ -124,6 +124,7 @@
 		reg = <0x58>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+		#interrupt-cells = <2>;
 		interrupt-controller;
 
 		regulators {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
index 86b4269e0e01..85e278eb2016 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
@@ -100,6 +100,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
index b81799d7076a..596b3bb3ddd1 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
@@ -25,7 +25,7 @@
 		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
 		pinctrl-0 = <&pinctrl_touch>;
-		pinctrl-names ="default";
+		pinctrl-names = "default";
 		spi-max-frequency = <1000000>;
 		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
 		#io-channel-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
index bda182edc589..81142c523fa8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
@@ -475,7 +475,7 @@
 						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 							"txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
index f6b35923ad83..df3a375f0a3e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
@@ -418,7 +418,7 @@
 					       <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
@@ -1010,7 +1010,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
@@ -1024,7 +1024,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
@@ -1038,7 +1038,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
index 3b87d980e9f4..a27a7554c2e7 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
@@ -364,7 +364,7 @@
 						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
index 44cc4ff1d0df..d12fb44aeb14 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
@@ -116,7 +116,7 @@
 	tpm_tis: tpm@1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tpm>;
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <1>;
 		spi-max-frequency = <20000000>;
 		interrupt-parent = <&gpio5>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index fe42b0a46831..3fc3130f9def 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -128,11 +128,16 @@
 		};
 	};
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
+	/* LM75A temperature sensor, TQMa7x 01xx */
+	lm75a: temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+	};
+
+	/* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
 	se97b: temperature-sensor-eeprom@1e {
 		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1e>;
-		status = "okay";
 	};
 
 	/* ST M24C64 */
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
index 3740e34ef99f..9670f45eab3b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
@@ -11,6 +11,10 @@
 		/* Required to properly pass MAC addresses from bootloader. */
 		ethernet0 = &fec1;
 		ethernet1 = &fec2;
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC/SD slot */
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
index 3a723843d562..9984b343cdf0 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
@@ -130,7 +130,7 @@
 	 * TCG specification - Section 6.4.1 Clocking:
 	 * TPM shall support a SPI clock frequency range of 10-24 MHz.
 	 */
-	st33htph: tpm-tis@0 {
+	st33htph: tpm@0 {
 		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <24000000>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
index dd8003bd1fc0..f0fda15f3020 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
@@ -212,7 +212,7 @@
 	keep-power-in-suspend;
 	wakeup-source;
 	vmmc-supply = <&reg_wlreg_on>;
-	vqmmc-supply =<&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
 	status = "okay";
 
 	brcmf: wifi@1 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
index 12361fcbe24a..1b965652291b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
@@ -63,6 +63,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
+		interrupt-controller;
 		reg = <0x25>;
 	};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
index c5eefe89cd99..8d5037ac03c7 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
@@ -108,6 +108,14 @@
 	assigned-clock-rates = <0>, <32768>;
 };
 
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
 &ecspi3 {
 	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
index 85b97b5f64e7..7ed27c7ad726 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
@@ -149,7 +149,7 @@
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 =<&pinctrl_i2c2>;
+	pinctrl-0 = <&pinctrl_i2c2>;
 	clock-frequency = <100000>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
index 4b94b8afb55d..0484e349e064 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
@@ -217,9 +217,6 @@
 };
 
 &ca_funnel_in_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
 	port@1 {
 		reg = <1>;
 		ca_funnel_in_port1: endpoint {
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
index 5387da8a2a0a..9c81c6baa2d3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
@@ -183,6 +183,15 @@
 		interrupt-parent = <&gpc>;
 		ranges;
 
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX7D_OCRAM_CLK>;
+		};
+
 		funnel@30041000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x30041000 0x1000>;
@@ -190,7 +199,11 @@
 			clock-names = "apb_pclk";
 
 			ca_funnel_in_ports: in-ports {
-				port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
 					ca_funnel_in_port0: endpoint {
 						remote-endpoint = <&etm0_out_port>;
 					};
@@ -605,6 +618,7 @@
 					nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -720,6 +734,8 @@
 				clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
 					<&clks IMX7D_ECSPI4_ROOT_CLK>;
 				clock-names = "ipg", "per";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 6 7 1>, <&sdma 7 7 2>;
 				status = "disabled";
 			};
 
@@ -811,7 +827,7 @@
 			};
 
 			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x30730000 0x10000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
@@ -850,6 +866,26 @@
 					};
 				};
 			};
+
+			mipi_dsi: dsi@30760000 {
+				compatible = "fsl,imx7d-mipi-dsim", "fsl,imx8mm-mipi-dsim";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30760000 0x400>;
+				clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>,
+					 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clks IMX7D_MIPI_DSI_ROOT_SRC>,
+						  <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+				assigned-clock-parents = <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+				assigned-clock-rates = <0>, <333000000>;
+				power-domains = <&pgc_mipi_phy>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				samsung,burst-clock-frequency = <891000000>;
+				samsung,esc-clock-frequency = <20000000>;
+				samsung,pll-clock-frequency = <24000000>;
+				status = "disabled";
+			};
 		};
 
 		aips3: bus@30800000 {
@@ -875,6 +911,8 @@
 					clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
 						<&clks IMX7D_ECSPI1_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 0 7 1>, <&sdma 1 7 2>;
 					status = "disabled";
 				};
 
@@ -887,6 +925,8 @@
 					clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
 						<&clks IMX7D_ECSPI2_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 2 7 1>, <&sdma 3 7 2>;
 					status = "disabled";
 				};
 
@@ -899,6 +939,8 @@
 					clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
 						<&clks IMX7D_ECSPI3_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 4 7 1>, <&sdma 5 7 2>;
 					status = "disabled";
 				};
 
@@ -1275,7 +1317,7 @@
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
index 5a8b867d7d79..e78d0a7d8cd2 100644
--- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
@@ -467,7 +467,7 @@
 
 	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6UL_PAD_GPIO1_IO09__PWM2_OUT		0x00003050
 		>;
 	};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
index 9cf09c183b85..6dd73290f0c6 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
@@ -74,7 +74,7 @@
 		sct_pwm: pwm@40000000 {
 			compatible = "nxp,lpc1850-sct-pwm";
 			reg = <0x40000000 0x1000>;
-			clocks =<&ccu1 CLK_CPU_SCT>;
+			clocks = <&ccu1 CLK_CPU_SCT>;
 			clock-names = "pwm";
 			resets = <&rgu 37>;
 			#pwm-cells = <3>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
index 49c78c84cd5d..d471cc5efa94 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
@@ -112,7 +112,7 @@
 			compatible = "fsl,ls1021a-msi";
 			reg = <0x0 0x1570e00 0x0 0x8>;
 			msi-controller;
-			interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi2: msi-controller@1570e08 {
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
index 636cf09a2b37..b23e7ada9c80 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
@@ -175,10 +175,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio1 24 0		/* SDA */
-			&gpio1 22 0		/* SCL */
-		>;
+		sda-gpios = <&gpio1 24 0>;
+		scl-gpios = <&gpio1 22 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 
@@ -186,10 +184,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio0 31 0		/* SDA */
-			&gpio0 30 0		/* SCL */
-		>;
+		sda-gpios = <&gpio0 31 0>;
+		scl-gpios = <&gpio0 30 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 
 		touch: touch@20 {
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
index fdf18b7cb2f6..0309592af1e1 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
@@ -110,7 +110,7 @@
 				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <0>;
 					interrupts = <16>;
 					gpio-controller;
@@ -120,7 +120,7 @@
 				};
 
 				gpio1: gpio@1 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <1>;
 					interrupts = <17>;
 					gpio-controller;
@@ -130,7 +130,7 @@
 				};
 
 				gpio2: gpio@2 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <2>;
 					interrupts = <18>;
 					gpio-controller;
@@ -412,7 +412,7 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <7>, <5>, <9>, <26>,
@@ -484,7 +484,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
+				compatible = "fsl,imx23-clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
index bb971e660db8..69fcb0dde940 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
@@ -18,6 +18,7 @@
 
 	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
+		device_type = "memory";
 	};
 
 	reg_3v3: regulator-reg-3v3 {
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
index 153e4017951d..5485fe118dc4 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
@@ -260,6 +260,7 @@
 	sgtl5000: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 		clocks = <&mclk>;
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index 6932d23fb29d..4817fba2d938 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -164,7 +164,7 @@
 				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <0>;
 					interrupts = <127>;
 					gpio-controller;
@@ -174,7 +174,7 @@
 				};
 
 				gpio1: gpio@1 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <1>;
 					interrupts = <126>;
 					gpio-controller;
@@ -184,7 +184,7 @@
 				};
 
 				gpio2: gpio@2 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <2>;
 					interrupts = <125>;
 					gpio-controller;
@@ -194,7 +194,7 @@
 				};
 
 				gpio3: gpio@3 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <3>;
 					interrupts = <124>;
 					gpio-controller;
@@ -204,7 +204,7 @@
 				};
 
 				gpio4: gpio@4 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <4>;
 					interrupts = <123>;
 					gpio-controller;
@@ -990,7 +990,7 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx28-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <78>, <79>, <66>, <0>,
@@ -1100,7 +1100,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+				compatible = "fsl,imx28-clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
index 14c411f146f5..5a19da9313ae 100644
--- a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
@@ -55,7 +55,7 @@
 	brightness-levels = <0 4 8 16 32 64 128 255>;
 	default-brightness-level = <6>;
 	power-supply = <&reg_3v3>;
-	status  = "okay";
+	status = "okay";
 };
 
 &dcu0 {
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
index e4f691d601cc..722182f5fd17 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
@@ -68,7 +68,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		/* PTD12 ->RPIO[91] */
-		sck-gpios  = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
 		/* PTD10 ->RPIO[89] */
 		miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <0>;
@@ -79,7 +79,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			/* PTB18 -> RGPIO[40] */
-			load-gpios  = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			spi-max-frequency = <100000>;
 		};
 	};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
index 1a19aec8957b..7e72f860c3c5 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
@@ -162,7 +162,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6085";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_switch>;
@@ -173,26 +173,26 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_fc_1000_1";
 					phy-mode = "1000base-x";
@@ -200,7 +200,7 @@
 					sfp = <&sff>;
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
index 16b4e06c4efa..029f49be40e3 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -294,11 +294,11 @@
 		pinctrl-names = "default";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		sck-gpios  = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		cs-gpios  = <&gpio1  9 GPIO_ACTIVE_LOW
-			     &gpio1  8 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW
+			    &gpio1 8 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <2>;
 
 		flash@0 {
@@ -338,6 +338,7 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
index df1335492a19..77492eeea450 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
@@ -47,17 +47,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0: switch0@0 {
+			switch0: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 0>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
+					ethernet-port@0 {
 						reg = <0>;
 						phy-mode = "rmii";
 						ethernet = <&fec1>;
@@ -68,37 +68,37 @@
 						};
 					};
 
-					port@1 {
+					ethernet-port@1 {
 						reg = <1>;
 						label = "aib2main_1";
 					};
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "aib2main_2";
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_cu_1000_5";
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_cu_1000_6";
 					};
 
-					port@5 {
+					ethernet-port@5 {
 						reg = <5>;
 						label = "eth_cu_1000_4";
 					};
 
-					port@6 {
+					ethernet-port@6 {
 						reg = <6>;
 						label = "eth_cu_1000_7";
 					};
 
-					port@7 {
+					ethernet-port@7 {
 						reg = <7>;
 						label = "modem_pic";
 
@@ -108,7 +108,7 @@
 						};
 					};
 
-					switch0port10: port@10 {
+					switch0port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
@@ -130,32 +130,32 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1: switch1@0 {
+			switch1: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 1>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@1 {
+					ethernet-port@1 {
 						reg = <1>;
 						label = "eth_cu_1000_3";
 					};
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_cu_100_2";
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_cu_100_3";
 					};
 
-					switch1port9: port@9 {
+					switch1port9: ethernet-port@9 {
 						reg = <9>;
 						label = "dsa";
 						phy-mode = "xgmii";
@@ -168,7 +168,7 @@
 						};
 					};
 
-					switch1port10: port@10 {
+					switch1port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
@@ -188,17 +188,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2: switch2@0 {
+			switch2: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 2>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_2";
 						phy-mode = "1000base-x";
@@ -206,7 +206,7 @@
 						sfp = <&sff1>;
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_3";
 						phy-mode = "1000base-x";
@@ -214,7 +214,7 @@
 						sfp = <&sff2>;
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_4";
 						phy-mode = "1000base-x";
@@ -222,7 +222,7 @@
 						sfp = <&sff3>;
 					};
 
-					port@5 {
+					ethernet-port@5 {
 						reg = <5>;
 						label = "eth_fc_1000_5";
 						phy-mode = "1000base-x";
@@ -230,7 +230,7 @@
 						sfp = <&sff4>;
 					};
 
-					port@6 {
+					ethernet-port@6 {
 						reg = <6>;
 						label = "eth_fc_1000_6";
 						phy-mode = "1000base-x";
@@ -238,7 +238,7 @@
 						sfp = <&sff5>;
 					};
 
-					port@7 {
+					ethernet-port@7 {
 						reg = <7>;
 						label = "eth_fc_1000_7";
 						phy-mode = "1000base-x";
@@ -246,7 +246,7 @@
 						sfp = <&sff6>;
 					};
 
-					port@9 {
+					ethernet-port@9 {
 						reg = <9>;
 						label = "eth_fc_1000_1";
 						phy-mode = "1000base-x";
@@ -254,7 +254,7 @@
 						sfp = <&sff0>;
 					};
 
-					switch2port10: port@10 {
+					switch2port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "2500base-x";
@@ -276,17 +276,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch3: switch3@0 {
+			switch3: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 3>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_8";
 						phy-mode = "1000base-x";
@@ -294,7 +294,7 @@
 						sfp = <&sff7>;
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_9";
 						phy-mode = "1000base-x";
@@ -302,7 +302,7 @@
 						sfp = <&sff8>;
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_10";
 						phy-mode = "1000base-x";
@@ -310,7 +310,7 @@
 						sfp = <&sff9>;
 					};
 
-					switch3port9: port@9 {
+					switch3port9: ethernet-port@9 {
 						reg = <9>;
 						label = "dsa";
 						phy-mode = "2500base-x";
@@ -322,7 +322,7 @@
 						};
 					};
 
-					switch3port10: port@10 {
+					switch3port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
index 1461804ecaea..2a490464660c 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
@@ -123,7 +123,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -134,11 +134,11 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
@@ -149,32 +149,32 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@4 {
+				ethernet-port@4 {
 					reg = <4>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_6";
 				};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
index 463c2452b9b7..078d8699e16d 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
@@ -112,7 +112,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -123,11 +123,11 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
@@ -138,27 +138,27 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_100_3";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@8 {
+				ethernet-port@8 {
 					reg = <8>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@9 {
+				ethernet-port@9 {
 					reg = <9>;
 					label = "eth_cu_1000_2";
 					phy-handle = <&phy9>;
@@ -167,12 +167,12 @@
 				};
 			};
 
-			mdio1 {
+			mdio-external {
 				compatible = "marvell,mv88e6xxx-mdio-external";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				phy9: phy9@0 {
+				phy9: ethernet-phy@0 {
 					compatible = "ethernet-phy-ieee802.3-c45";
 					pinctrl-0 = <&pinctrl_gpio_phy9>;
 					pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
index f5ae0d5de315..22c8f44390a9 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
@@ -137,7 +137,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -148,11 +148,11 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
@@ -163,32 +163,32 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@4 {
+				ethernet-port@4 {
 					reg = <4>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_6";
 				};
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index 3dfb1c8cefb8..9cc1e14e6cd0 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -23,12 +23,19 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq4019-ap.dk07.1-c2.dtb \
 	qcom-ipq8064-ap148.dtb \
 	qcom-ipq8064-rb3011.dtb \
+	qcom-msm8226-microsoft-dempsey.dtb \
+	qcom-msm8226-microsoft-makepeace.dtb \
+	qcom-msm8226-microsoft-moneypenny.dtb \
 	qcom-msm8226-samsung-s3ve3g.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8916-samsung-e5.dtb \
 	qcom-msm8916-samsung-e7.dtb \
 	qcom-msm8916-samsung-grandmax.dtb \
 	qcom-msm8916-samsung-serranove.dtb \
+	qcom-msm8926-htc-memul.dtb \
+	qcom-msm8926-microsoft-superman-lte.dtb \
+	qcom-msm8926-microsoft-tesla.dtb \
+	qcom-msm8926-motorola-peregrine.dtb \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8960-samsung-expressatt.dtb \
 	qcom-msm8974-lge-nexus5-hammerhead.dtb \
diff --git a/arch/arm/boot/dts/qcom/pm8018.dtsi b/arch/arm/boot/dts/qcom/pm8018.dtsi
new file mode 100644
index 000000000000..22f3c7bac522
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8018.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Qualcomm PM8018
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+&ssbi {
+	pm8018: pmic {
+		compatible = "qcom,pm8018", "qcom,pm8921";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8018-pwrkey",
+				     "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8018 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8018 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8018_mpps: mpps@50 {
+			compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+			reg = <0x50>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8018_mpps 0 0 6>;
+		};
+
+		rtc@11d {
+			compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts-extended = <&pm8018 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pm8018_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8018_gpio 0 0 6>;
+			#gpio-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi
new file mode 100644
index 000000000000..984b79777984
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8058.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+	pm8058: pmic {
+		compatible = "qcom,pm8058";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8058-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8058 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8058 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8058_led48: led@48 {
+			compatible = "qcom,pm8058-keypad-led";
+			reg = <0x48>;
+			status = "disabled";
+		};
+
+		vibrator@4a {
+			compatible = "qcom,pm8058-vib";
+			reg = <0x4a>;
+		};
+
+		pm8058_mpps: mpps@50 {
+			compatible = "qcom,pm8058-mpp",
+				     "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8058_mpps 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8058_led131: led@131 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x131>;
+			status = "disabled";
+		};
+
+		pm8058_led132: led@132 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x132>;
+			status = "disabled";
+		};
+
+		pm8058_led133: led@133 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x133>;
+			status = "disabled";
+		};
+
+		pm8058_keypad: keypad@148 {
+			compatible = "qcom,pm8058-keypad";
+			reg = <0x148>;
+			interrupts-extended = <&pm8058 74 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8058 75 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15>;
+			scan-delay = <32>;
+			row-hold = <91500>;
+		};
+
+		pm8058_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8058_gpio 0 0 44>;
+			#gpio-cells = <2>;
+		};
+
+		pm8058_xoadc: xoadc@197 {
+			compatible = "qcom,pm8058-adc";
+			reg = <0x197>;
+			interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#io-channel-cells = <2>;
+
+			vcoin: adc-channel@0 {
+				reg = <0x00 0x00>;
+			};
+
+			vbat: adc-channel@1 {
+				reg = <0x00 0x01>;
+			};
+
+			dcin: adc-channel@2 {
+				reg = <0x00 0x02>;
+			};
+
+			ichg: adc-channel@3 {
+				reg = <0x00 0x03>;
+			};
+
+			vph_pwr: adc-channel@4 {
+				reg = <0x00 0x04>;
+			};
+
+			usb_vbus: adc-channel@a {
+				reg = <0x00 0x0a>;
+			};
+
+			die_temp: adc-channel@b {
+				reg = <0x00 0x0b>;
+			};
+
+			ref_625mv: adc-channel@c {
+				reg = <0x00 0x0c>;
+			};
+
+			ref_1250mv: adc-channel@d {
+				reg = <0x00 0x0d>;
+			};
+
+			ref_325mv: adc-channel@e {
+				reg = <0x00 0x0e>;
+			};
+
+			ref_muxoff: adc-channel@f {
+				reg = <0x00 0x0f>;
+			};
+		};
+
+		rtc@1e8 {
+			compatible = "qcom,pm8058-rtc";
+			reg = <0x1e8>;
+			interrupts-extended = <&pm8058 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+	};
+};
+
+/ {
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom/pm8226.dtsi
index 2413778f3715..2fd4f135ed84 100644
--- a/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8226.dtsi
@@ -82,6 +82,8 @@
 					  "usb-valid",
 					  "dc-valid";
 
+			status = "disabled";
+
 			chg_otg: otg-vbus { };
 		};
 
diff --git a/arch/arm/boot/dts/qcom/pm8821.dtsi b/arch/arm/boot/dts/qcom/pm8821.dtsi
new file mode 100644
index 000000000000..064e3ba54e18
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8821.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This PMIC is used on a secondary SSBI bus */
+&ssbi2 {
+	pm8821: pmic {
+		compatible = "qcom,pm8821";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8821_mpps: mpps@50 {
+			compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8821_mpps 0 0 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom/pm8841.dtsi
index 3bf2ce5c86a6..3bf2ce5c86a6 100644
--- a/arch/arm/boot/dts/qcom/qcom-pm8841.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8841.dtsi
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
new file mode 100644
index 000000000000..058962af3005
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+	pm8921: pmic {
+		compatible = "qcom,pm8921";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8921 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8921 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8921_mpps: mpps@50 {
+			compatible = "qcom,pm8921-mpp",
+				     "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8921_mpps 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		rtc@11d {
+			compatible = "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts-extended = <&pm8921 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pm8921_keypad: keypad@148 {
+			compatible = "qcom,pm8921-keypad";
+			reg = <0x148>;
+			interrupts-extended = <&pm8921 74 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8921 75 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15>;
+			scan-delay = <32>;
+			row-hold = <91500>;
+			status = "disabled";
+		};
+
+		pm8921_gpio: gpio@150 {
+
+			compatible = "qcom,pm8921-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8921_gpio 0 0 44>;
+			#gpio-cells = <2>;
+
+		};
+
+		pm8921_xoadc: xoadc@197 {
+			compatible = "qcom,pm8921-adc";
+			reg = <0x197>;
+			interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#io-channel-cells = <2>;
+
+			vcoin: adc-channel@0 {
+				reg = <0x00 0x00>;
+			};
+
+			vbat: adc-channel@1 {
+				reg = <0x00 0x01>;
+			};
+
+			dcin: adc-channel@2 {
+				reg = <0x00 0x02>;
+			};
+
+			vph_pwr: adc-channel@4 {
+				reg = <0x00 0x04>;
+			};
+
+			batt_therm: adc-channel@8 {
+				reg = <0x00 0x08>;
+			};
+
+			batt_id: adc-channel@9 {
+				reg = <0x00 0x09>;
+			};
+
+			usb_vbus: adc-channel@a {
+				reg = <0x00 0x0a>;
+			};
+
+			die_temp: adc-channel@b {
+				reg = <0x00 0x0b>;
+			};
+
+			ref_625mv: adc-channel@c {
+				reg = <0x00 0x0c>;
+			};
+
+			ref_1250mv: adc-channel@d {
+				reg = <0x00 0x0d>;
+			};
+
+			chg_temp: adc-channel@e {
+				reg = <0x00 0x0e>;
+			};
+
+			ref_muxoff: adc-channel@f {
+				reg = <0x00 0x0f>;
+			};
+		};
+	};
+};
+
+/ {
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom/pm8941.dtsi
index ed0ba591c755..aca0052a02b7 100644
--- a/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8941.dtsi
@@ -99,6 +99,8 @@
 
 			usb-otg-in-supply = <&pm8941_5vs1>;
 
+			status = "disabled";
+
 			chg_otg: otg-vbus { };
 		};
 
diff --git a/arch/arm/boot/dts/qcom/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom/pma8084.dtsi
index 2985f4805b93..2985f4805b93 100644
--- a/arch/arm/boot/dts/qcom/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom/pma8084.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom/pmx55.dtsi
index da0851173c69..da0851173c69 100644
--- a/arch/arm/boot/dts/qcom/qcom-pmx55.dtsi
+++ b/arch/arm/boot/dts/qcom/pmx55.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom/pmx65.dtsi
index 1c7fdf59c1f5..1c7fdf59c1f5 100644
--- a/arch/arm/boot/dts/qcom/qcom-pmx65.dtsi
+++ b/arch/arm/boot/dts/qcom/pmx65.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
index aa0e0e8d2a97..a2ca456012f1 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 
@@ -253,6 +253,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4400000>;
 	qcom,auto-recharge-threshold-voltage = <4300000>;
 	qcom,minimum-input-voltage = <4400000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
index de19640efe55..ac228965a485 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 #include <dt-bindings/input/ti-drv260x.h>
 
 /delete-node/ &adsp_region;
@@ -335,6 +335,8 @@
 	qcom,fast-charge-current-limit = <300000>;
 	qcom,fast-charge-safe-current = <600000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
index b887e5361ec3..0a1fd5eb3c6d 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 
@@ -292,6 +292,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4350000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
 	qcom,minimum-input-voltage = <4450000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
index f516e0426bb9..cffc069712b2 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -7,7 +7,7 @@
 
 #include <dt-bindings/input/input.h>
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 /delete-node/ &smem_region;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 569cbf0d8df8..009afd8212c2 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -5,6 +5,7 @@
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 #include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
 
 / {
 	model = "Qualcomm APQ8060 Dragonboard";
@@ -71,7 +72,7 @@
 		/* Trig on both edges - getting close or far away */
 		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
 		/* MPP05 analog input to the XOADC */
-		io-channels = <&xoadc 0x00 0x05>;
+		io-channels = <&pm8058_xoadc 0x00 0x05>;
 		io-channel-names = "aout";
 		pinctrl-names = "default";
 		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
@@ -272,6 +273,10 @@
 	};
 };
 
+&pm8058 {
+	interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8058_gpio {
 	dragon_ethernet_gpios: ethernet-state {
 		pinconf {
@@ -447,6 +452,8 @@
 	 * that means
 	 */
 	regulators-0 {
+		compatible = "qcom,rpm-pm8901-regulators";
+
 		vdd_l0-supply = <&pm8901_s4>;
 		vdd_l1-supply = <&vph>;
 		vdd_l2-supply = <&vph>;
@@ -464,57 +471,63 @@
 		lvs3_in-supply = <&pm8058_s2>;
 		mvs_in-supply = <&pm8058_s3>;
 
-		l0 {
+		pm8901_l0: l0 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l1 {
+
+		pm8901_l1: l1 {
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l2 {
+
+		pm8901_l2: l2 {
 			/* TMA340 requires strictly 3.3V */
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l3 {
+
+		pm8901_l3: l3 {
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l4 {
+
+		pm8901_l4: l4 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l5 {
+
+		pm8901_l5: l5 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l6 {
+
+		pm8901_l6: l6 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			bias-pull-down;
 		};
 
 		/* s0 and s1 are SAW regulators controlled over SPM */
-		s2 {
+		pm8901_s2: s2 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s3 {
+		pm8901_s3: s3 {
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s4 {
+		pm8901_s4: s4 {
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -522,17 +535,22 @@
 		};
 
 		/* LVS0 thru 3 and mvs are just switches */
-		lvs0 {
+		pm8901_lvs0: lvs0 {
 			regulator-always-on;
 		};
-		lvs1 { };
-		lvs2 { };
-		lvs3 { };
-		mvs { };
 
+		pm8901_lvs1: lvs1 { };
+
+		pm8901_lvs2: lvs2 { };
+
+		pm8901_lvs3: lvs3 { };
+
+		pm8901_mvs: mvs { };
 	};
 
 	regulators-1 {
+		compatible = "qcom,rpm-pm8058-regulators";
+
 		vdd_l0_l1_lvs-supply = <&pm8058_s3>;
 		vdd_l2_l11_l12-supply = <&vph>;
 		vdd_l3_l4_l5-supply = <&vph>;
@@ -554,144 +572,169 @@
 		vdd_s4-supply = <&vph>;
 		vdd_ncp-supply = <&vph>;
 
-		l0 {
+		pm8058_l0: l0 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l1 {
+
+		pm8058_l1: l1 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l2 {
+
+		pm8058_l2: l2 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l3 {
+
+		pm8058_l3: l3 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l4 {
+
+		pm8058_l4: l4 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l5 {
+
+		pm8058_l5: l5 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l6 {
+
+		pm8058_l6: l6 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3600000>;
 			bias-pull-down;
 		};
-		l7 {
+
+		pm8058_l7: l7 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l8 {
+
+		pm8058_l8: l8 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <3050000>;
 			bias-pull-down;
 		};
-		l9 {
+
+		pm8058_l9: l9 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l10 {
+
+		pm8058_l10: l10 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l11 {
+
+		pm8058_l11: l11 {
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
 			bias-pull-down;
 		};
-		l12 {
+
+		pm8058_l12: l12 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <2900000>;
 			bias-pull-down;
 		};
-		l13 {
+
+		pm8058_l13: l13 {
 			regulator-min-microvolt = <2050000>;
 			regulator-max-microvolt = <2050000>;
 			bias-pull-down;
 		};
-		l14 {
+
+		pm8058_l14: l14 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 		};
-		l15 {
+
+		pm8058_l15: l15 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l16 {
+
+		pm8058_l16: l16 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 			regulator-always-on;
 		};
-		l17 {
+
+		pm8058_l17: l17 {
 			// 1.5V according to schematic
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l18 {
+
+		pm8058_l18: l18 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			bias-pull-down;
 		};
-		l19 {
+
+		pm8058_l19: l19 {
 			regulator-min-microvolt = <2500000>;
 			regulator-max-microvolt = <2500000>;
 			bias-pull-down;
 		};
-		l20 {
+
+		pm8058_l20: l20 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l21 {
+
+		pm8058_l21: l21 {
 			// 1.1 V according to schematic
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 			regulator-always-on;
 		};
-		l22 {
+
+		pm8058_l22: l22 {
 			// 1.2 V according to schematic
 			regulator-min-microvolt = <1150000>;
 			regulator-max-microvolt = <1150000>;
 			bias-pull-down;
 		};
-		l23 {
+
+		pm8058_l23: l23 {
 			// Unused
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l24 {
+
+		pm8058_l24: l24 {
 			// Unused
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l25 {
+
+		pm8058_l25: l25 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		s0 {
+		pm8058_s0: s0 {
 			// regulator-min-microvolt = <500000>;
 			// regulator-max-microvolt = <1325000>;
 			regulator-min-microvolt = <1100000>;
@@ -699,7 +742,8 @@
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s1 {
+
+		pm8058_s1: s1 {
 			// regulator-min-microvolt = <500000>;
 			// regulator-max-microvolt = <1250000>;
 			regulator-min-microvolt = <1100000>;
@@ -707,21 +751,24 @@
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s2 {
+
+		pm8058_s2: s2 {
 			// 1.3 V according to schematic
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s3 {
+
+		pm8058_s3: s3 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
 			regulator-always-on;
 			bias-pull-down;
 		};
-		s4 {
+
+		pm8058_s4: s4 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -730,14 +777,15 @@
 		};
 
 		/* LVS0 and LVS1 are just switches */
-		lvs0 {
+		pm8058_lvs0: lvs0 {
 			bias-pull-down;
 		};
-		lvs1 {
+
+		pm8058_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		ncp {
+		pm8058_ncp: ncp {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -944,28 +992,32 @@
 	};
 };
 
-&xoadc {
+&pm8058_xoadc {
 	/* Reference voltage 2.2 V */
 	xoadc-ref-supply = <&pm8058_l18>;
 
 	/* Board-specific channels */
-	mpp5@5 {
+	adc-channel@5 {
 		/* Connected to AOUT of ALS sensor */
 		reg = <0x00 0x05>;
 	};
-	mpp6@6 {
+
+	adc-channel@6 {
 		/* Connected to test point TP43 */
 		reg = <0x00 0x06>;
 	};
-	mpp7@7 {
+
+	adc-channel@7 {
 		/* Connected to battery thermistor */
 		reg = <0x00 0x07>;
 	};
-	mpp8@8 {
+
+	adc-channel@8 {
 		/* Connected to battery ID detector */
 		reg = <0x00 0x08>;
 	};
-	mpp9@9 {
+
+	adc-channel@9 {
 		/* Connected to XO thermistor */
 		reg = <0x00 0x09>;
 	};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index c0dd6399f597..d460743fbb94 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -1,8 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Asus Nexus7(flo)";
 	compatible = "asus,nexus7-flo", "qcom,apq8064";
@@ -180,24 +184,26 @@
 	status = "okay";
 };
 
-/* eMMC */
-&sdcc1 {
-	vmmc-supply = <&pm8921_l5>;
-	vqmmc-supply = <&pm8921_s4>;
-	status = "okay";
-};
-
 &mdp_dsi1_out {
 	remote-endpoint = <&dsi0_in>;
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
 
-
 		vdd_l24-supply = <&pm8921_s1>;
 		vdd_l25-supply = <&pm8921_s1>;
 		vin_lvs2-supply = <&pm8921_s1>;
@@ -209,7 +215,7 @@
 		vdd_ncp-supply = <&pm8921_l6>;
 
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -218,7 +224,7 @@
 		};
 
 		/* msm otg HSUSB_VDDCX */
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <500000>;
 			regulator-max-microvolt = <1150000>;
 			qcom,switch-mode-frequency = <4800000>;
@@ -231,55 +237,58 @@
 		 * tabla2x-slim-CDC_VDD_CP
 		 * tabla2x-slim-VDDIO_CDC
 		 */
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 			regulator-always-on;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
 		/* mipi_dsi.1-dsi1_pll_vdda */
-		l2 {
+		pm8921_l2: l2 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-always-on;
 		};
 
 		/* msm_otg-HSUSB_3p3 */
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3075000>;
 			regulator-max-microvolt = <3075000>;
 			bias-pull-down;
 		};
 
 		/* msm_otg-HSUSB_1p8 */
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
 		/* msm_sdcc.1-sdc_vdd */
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			regulator-always-on;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 		};
 
+		pm8921_l8: l8 {
+		};
+
 		/* mipi_dsi.1-dsi1_avdd */
-		l11 {
+		pm8921_l11: l11 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
@@ -287,14 +296,14 @@
 		};
 
 		/* pwm_power for backlight */
-		l17 {
+		pm8921_l17: l17 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			regulator-always-on;
 		};
 
 		/* camera, qdsp6 */
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
@@ -304,37 +313,44 @@
 		 * tabla2x-slim-CDC_VDDA_A_1P2V
 		 * tabla2x-slim-VDDD_CDC_D
 		 */
-		l25 {
+		pm8921_l25: l25 {
 			regulator-min-microvolt = <1250000>;
 			regulator-max-microvolt = <1250000>;
 			bias-pull-down;
 		};
 
-		lvs1 {
+		pm8921_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		lvs4 {
+		pm8921_lvs4: lvs4 {
 			bias-pull-down;
 		};
 
-		lvs5 {
+		pm8921_lvs5: lvs5 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
 		/*
 		 * mipi_dsi.1-dsi1_vddio
 		 * pil_riva-pll_vdd
 		 */
-		lvs7 {
+		pm8921_lvs7: lvs7 {
 			bias-pull-down;
 		};
 	};
 };
 
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
 &usb_hs1_phy {
 	v3p3-supply = <&pm8921_l3>;
 	v1p8-supply = <&pm8921_l4>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
index d6ecfd8addb7..671d58cc2741 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
@@ -1,8 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "CompuLab CM-QS600";
 	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
@@ -69,6 +72,14 @@
 	status = "okay";
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	wlan_default_gpios: wlan-gpios-state {
 		pinconf {
@@ -82,6 +93,8 @@
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs2-supply = <&pm8921_s1>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
@@ -93,9 +106,8 @@
 		vdd_l27-supply = <&pm8921_s7>;
 		vdd_l28-supply = <&pm8921_s7>;
 
-
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -103,52 +115,51 @@
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2750000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
-
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
index b0c5e7bd5e74..ed86b24119c9 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -1,9 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Qualcomm APQ8064/IFC6410";
 	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
@@ -170,6 +173,14 @@
 	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	wlan_default_gpios: wlan-gpios-state {
 		pinconf {
@@ -192,6 +203,8 @@
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs2-supply = <&pm8921_s1>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
@@ -203,9 +216,8 @@
 		vdd_l27-supply = <&pm8921_s7>;
 		vdd_l28-supply = <&pm8921_s7>;
 
-
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -213,59 +225,63 @@
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2750000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			bias-pull-down;
 		};
 
-		lvs1 {
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_hdmi_switch: hdmi-switch {
 			bias-pull-down;
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 9244512b74d1..2412aa3e3e8d 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -1,10 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/qcom-rpm.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Sony Xperia Z";
 	compatible = "sony,xperia-yuga", "qcom,apq8064";
@@ -65,6 +68,14 @@
 	status = "okay";
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio3", "gpio4", "gpio29", "gpio35";
@@ -82,11 +93,25 @@
 &riva {
 	pinctrl-names = "default";
 	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+
+	vddcx-supply = <&pm8921_s3>;
+	vddmx-supply = <&pm8921_l24>;
+	vddpx-supply = <&pm8921_s4>;
+
 	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8921_l4>;
+		vddrfa-supply = <&pm8921_s2>;
+		vddpa-supply = <&pm8921_l10>;
+		vdddig-supply = <&pm8921_lvs2>;
+	};
 };
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
 		vin_lvs_1_3_6-supply = <&pm8921_s4>;
 		vin_lvs_4_5_7-supply = <&pm8921_s4>;
@@ -98,7 +123,7 @@
 		vin_l28-supply = <&pm8921_s7>;
 
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -106,21 +131,21 @@
 			bias-pull-down;
 		};
 
-		s2 {
+		pm8921_s2: s2 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <500000>;
 			regulator-max-microvolt = <1150000>;
 			qcom,switch-mode-frequency = <4800000>;
 			bias-pull-down;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-always-on;
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -129,205 +154,207 @@
 			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s8 {
+		pm8921_s8: s8 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			qcom,switch-mode-frequency = <1600000>;
 		};
 
 		/* PMOS LDO */
-		l1 {
+		pm8921_l1: l1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 			bias-pull-down;
 		};
 
-		l2 {
+		pm8921_l2: l2 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3075000>;
 			regulator-max-microvolt = <3075000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-always-on;
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l7 {
+		pm8921_l7: l7 {
 			regulator-min-microvolt = <1850000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l8 {
+		pm8921_l8: l8 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			bias-pull-down;
 		};
 
-		l9 {
+		pm8921_l9: l9 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l10 {
+		pm8921_l10: l10 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <2900000>;
 			bias-pull-down;
 		};
 
-		l11 {
+		pm8921_l11: l11 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l12 {
+		pm8921_l12: l12 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l14 {
+		pm8921_l14: l14 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l15 {
+		pm8921_l15: l15 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l16 {
+		pm8921_l16: l16 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			bias-pull-down;
 		};
 
-		l17 {
+		pm8921_l17: l17 {
 			regulator-min-microvolt = <2000000>;
 			regulator-max-microvolt = <2000000>;
 			bias-pull-down;
 		};
 
-		l18 {
+		pm8921_l18: l18 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l21 {
+		pm8921_l21: l21 {
 			regulator-min-microvolt = <1050000>;
 			regulator-max-microvolt = <1050000>;
 			bias-pull-down;
 		};
 
-		l22 {
+		pm8921_l22: l22 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l24 {
+		pm8921_l24: l24 {
 			regulator-min-microvolt = <750000>;
 			regulator-max-microvolt = <1150000>;
 			bias-pull-down;
 		};
 
-		l25 {
+		pm8921_l25: l25 {
 			regulator-always-on;
 			regulator-min-microvolt = <1250000>;
 			regulator-max-microvolt = <1250000>;
 			bias-pull-down;
 		};
 
-		l27 {
+		pm8921_l27: l27 {
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 		};
 
-		l28 {
+		pm8921_l28: l28 {
 			regulator-min-microvolt = <1050000>;
 			regulator-max-microvolt = <1050000>;
 			bias-pull-down;
 		};
 
-		l29 {
+		pm8921_l29: l29 {
 			regulator-min-microvolt = <2000000>;
 			regulator-max-microvolt = <2000000>;
 			bias-pull-down;
 		};
 
 		/* Low Voltage Switch */
-		lvs1 {
+		pm8921_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		lvs2 {
+		pm8921_lvs2: lvs2 {
 			bias-pull-down;
 		};
 
-		lvs3 {
+		pm8921_lvs3: lvs3 {
 			bias-pull-down;
 		};
 
-		lvs4 {
+		pm8921_lvs4: lvs4 {
 			bias-pull-down;
 		};
 
-		lvs5 {
+		pm8921_lvs5: lvs5 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
 
-		lvs7 {
+		pm8921_lvs7: lvs7 {
 			bias-pull-down;
 		};
 
-		usb-switch {};
+		pm8921_usb_switch: usb-switch {};
 
-		hdmi-switch {};
+		pm8921_hdmi_switch: hdmi-switch {
+			bias-pull-down;
+		};
 
-		ncp {
+		pm8921_ncp: ncp {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 59fd86b9fb47..3faf57035d54 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -284,23 +284,6 @@
 		};
 	};
 
-
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Charger temperature */
-	};
-
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -655,133 +638,16 @@
 			clock-names = "core";
 		};
 
-		ssbi@c00000 {
+		ssbi2: ssbi@c00000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00c00000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pm8821: pmic {
-				compatible = "qcom,pm8821";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8821_mpps: mpps@50 {
-					compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
-					reg = <0x50>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8821_mpps 0 0 4>;
-				};
-			};
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <74 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8921_gpio: gpio@150 {
-
-					compatible = "qcom,pm8921-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8921_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8921_mpps: mpps@50 {
-					compatible = "qcom,pm8921-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8921_mpps 0 0 12>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 1>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				xoadc: xoadc@197 {
-					compatible = "qcom,pm8921-adc";
-					reg = <197>;
-					interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					batt_therm: adc-channel@8 {
-						reg = <0x00 0x08>;
-					};
-					batt_id: adc-channel@9 {
-						reg = <0x00 0x09>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					chg_temp: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-			};
 		};
 
 		qfprom: qfprom@700000 {
@@ -891,60 +757,6 @@
 				clocks = <&pxo_board>, <&cxo_board>;
 				clock-names = "pxo", "cxo";
 			};
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-
-				pm8921_s1: s1 {};
-				pm8921_s2: s2 {};
-				pm8921_s3: s3 {};
-				pm8921_s4: s4 {};
-				pm8921_s7: s7 {};
-				pm8921_s8: s8 {};
-
-				pm8921_l1: l1 {};
-				pm8921_l2: l2 {};
-				pm8921_l3: l3 {};
-				pm8921_l4: l4 {};
-				pm8921_l5: l5 {};
-				pm8921_l6: l6 {};
-				pm8921_l7: l7 {};
-				pm8921_l8: l8 {};
-				pm8921_l9: l9 {};
-				pm8921_l10: l10 {};
-				pm8921_l11: l11 {};
-				pm8921_l12: l12 {};
-				pm8921_l14: l14 {};
-				pm8921_l15: l15 {};
-				pm8921_l16: l16 {};
-				pm8921_l17: l17 {};
-				pm8921_l18: l18 {};
-				pm8921_l21: l21 {};
-				pm8921_l22: l22 {};
-				pm8921_l23: l23 {};
-				pm8921_l24: l24 {};
-				pm8921_l25: l25 {};
-				pm8921_l26: l26 {};
-				pm8921_l27: l27 {};
-				pm8921_l28: l28 {};
-				pm8921_l29: l29 {};
-
-				pm8921_lvs1: lvs1 {};
-				pm8921_lvs2: lvs2 {};
-				pm8921_lvs3: lvs3 {};
-				pm8921_lvs4: lvs4 {};
-				pm8921_lvs5: lvs5 {};
-				pm8921_lvs6: lvs6 {};
-				pm8921_lvs7: lvs7 {};
-
-				pm8921_usb_switch: usb-switch {};
-
-				pm8921_hdmi_switch: hdmi-switch {
-					bias-pull-down;
-				};
-
-				pm8921_ncp: ncp {};
-			};
 		};
 
 		usb1: usb@12500000 {
@@ -1472,7 +1284,7 @@
 			qcom,ncb = <3>;
 		};
 
-		pcie: pci@1b500000 {
+		pcie: pcie@1b500000 {
 			compatible = "qcom,pcie-apq8064";
 			reg = <0x1b500000 0x1000>,
 			      <0x1b502000 0x80>,
@@ -1623,10 +1435,6 @@
 
 			memory-region = <&wcnss_mem>;
 
-			vddcx-supply = <&pm8921_s3>;
-			vddmx-supply = <&pm8921_l24>;
-			vddpx-supply = <&pm8921_s4>;
-
 			status = "disabled";
 
 			iris {
@@ -1634,11 +1442,6 @@
 
 				clocks = <&cxo_board>;
 				clock-names = "xo";
-
-				vddxo-supply = <&pm8921_l4>;
-				vddrfa-supply = <&pm8921_s2>;
-				vddpa-supply = <&pm8921_l10>;
-				vdddig-supply = <&pm8921_lvs2>;
 			};
 
 			smd-edge {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
index 6d1b2439ae3a..6fce0112361f 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
@@ -4,8 +4,8 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 
 /delete-node/ &mpss_region;
 
@@ -49,6 +49,33 @@
 			no-map;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_uart2 {
@@ -403,6 +430,10 @@
 	pinctrl-1 = <&sdc2_off>;
 };
 
+&smbb {
+	status = "okay";
+};
+
 &tlmm {
 	sdc1_on: sdc1-on-state {
 		clk-pins {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
index 116e59a3b76d..1df24c922be9 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ8084/IFC6540";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
index c6b6680248a6..d4e6aee034af 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ 8084-MTP";
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
index 468ebc40d2ad..374af6dd360a 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
@@ -98,7 +98,7 @@
 			};
 		};
 
-		pci@40000000 {
+		pcie@40000000 {
 			status = "okay";
 			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 9844e0b7cff9..f989bd741cd1 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -224,7 +224,7 @@
 		};
 
 		sdhci: mmc@7824900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,ipq4019-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x7824900 0x11c>, <0x7824000 0x800>;
 			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@@ -417,7 +417,7 @@
 			reg = <0x4ab000 0x4>;
 		};
 
-		pcie0: pci@40000000 {
+		pcie0: pcie@40000000 {
 			compatible = "qcom,pcie-ipq4019";
 			reg = <0x40000000 0xf1d>,
 			      <0x40000f20 0xa8>,
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 6198f42f6a9c..6a7f4dd0f775 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -366,7 +366,7 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
@@ -1076,7 +1076,7 @@
 			status = "disabled";
 		};
 
-		pcie0: pci@1b500000 {
+		pcie0: pcie@1b500000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b500000 0x1000
 			       0x1b502000 0x80
@@ -1127,7 +1127,7 @@
 			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 		};
 
-		pcie1: pci@1b700000 {
+		pcie1: pcie@1b700000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b700000 0x1000
 			       0x1b702000 0x80
@@ -1178,7 +1178,7 @@
 			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 		};
 
-		pcie2: pci@1b900000 {
+		pcie2: pcie@1b900000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b900000 0x1000
 			       0x1b902000 0x80
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
index b269fdca1460..e3b4b93c3d38 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -6,11 +6,11 @@
  * Author : Neil Armstrong <narmstrong@baylibre.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 #include "qcom-mdm9615-wp8548.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "MangOH Green with WP8548 Module";
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index 92c8003dac25..0dd52cac0e2e 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "qcom-mdm9615.dtsi"
+#include "pm8018.dtsi"
 
 / {
 	model = "Sierra Wireless WP8548 Module";
@@ -76,7 +77,11 @@
 	};
 };
 
-&pmicgpio {
+&pm8018 {
+	interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pm8018_gpio {
 	usb_vbus_5v_pins: usb-vbus-5v-state {
 		pins = "gpio4";
 		function = "normal";
@@ -129,6 +134,142 @@
 	pinctrl-names = "default";
 };
 
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8018-regulators";
+
+		vin_lvs1-supply = <&pm8018_s3>;
+
+		vdd_l7-supply = <&pm8018_s4>;
+		vdd_l8-supply = <&pm8018_s3>;
+		vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+		/* Buck SMPS */
+		pm8018_s1: s1 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s2: s2 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s3: s3 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s4: s4 {
+			regulator-min-microvolt = <2100000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s5: s5 {
+			regulator-always-on;
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1350000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8018_l2: l2 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8018_l3: l3 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8018_l4: l4 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8018_l5: l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8018_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8018_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8018_l8: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8018_l9: l9 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8018_l10: l10 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l11: l11 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l12: l12 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l13: l13 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8018_l14: l14 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8018_lvs1: lvs1 {
+			bias-pull-down;
+		};
+	};
+};
+
 &sdcc1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index 63e21aa23642..34c60994d026 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -256,57 +256,10 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8018", "qcom,pm8921";
-				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pmicmpp: mpps@50 {
-					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pmicmpp 0 0 6>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pmicgpio: gpio@150 {
-					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pmicgpio 0 0 6>;
-					#gpio-cells = <2>;
-				};
-			};
 		};
 
 		sdcc1bam: dma-controller@12182000 {
@@ -383,140 +336,6 @@
 				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8018-regulators";
-
-				vin_lvs1-supply = <&pm8018_s3>;
-
-				vdd_l7-supply = <&pm8018_s4>;
-				vdd_l8-supply = <&pm8018_s3>;
-				vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
-
-				/* Buck SMPS */
-				pm8018_s1: s1 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s2: s2 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s3: s3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s4: s4 {
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s5: s5 {
-					regulator-always-on;
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* PMOS LDO */
-				pm8018_l2: l2 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l3: l3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l4: l4 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				pm8018_l5: l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l6: l6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l7: l7 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8018_l8: l8 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				pm8018_l9: l9 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				pm8018_l10: l10 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l11: l11 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l12: l12 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l13: l13 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8018_l14: l14 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				pm8018_lvs1: lvs1 {
-					bias-pull-down;
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
new file mode 100644
index 000000000000..525d8c608b06
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common Board Device Tree for Microsoft MSM8x26-based Lumias
+ *
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+#include <dt-bindings/input/input.h>
+
+/*
+ * Delete all generic (msm8226.dtsi) reserved
+ * memory mappings which are different on these devices.
+ */
+/delete-node/ &smem_region;
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* microSD */
+		display0 = &framebuffer;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x3200000 0x800000>;
+			format = "a8r8g8b8";
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 4)>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	/*
+	 * This device being a WP platform has a different
+	 * memory layout than other Android based devices.
+	 * This smem memory region is directly copied from
+	 * the original UEFI firmware.
+	 */
+	reserved-memory {
+		display_reserved: framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		/* These values were taken from the original firmware DSDT */
+		pm8226_s1: s1 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2075000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio106", "gpio107", "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		irq-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio16";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
new file mode 100644
index 000000000000..2c664b5934ec
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Microsoft Lumia 640";
+	compatible = "microsoft,dempsey", "qcom,msm8226";
+	chassis-type = "handset";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
new file mode 100644
index 000000000000..731c5c375678
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Microsoft Lumia 640 XL";
+	compatible = "microsoft,makepeace", "qcom,msm8226";
+	chassis-type = "handset";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
new file mode 100644
index 000000000000..992b7115b5f8
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Nokia Lumia 630";
+	compatible = "microsoft,moneypenny", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&framebuffer {
+	width = <480>;
+	height = <854>;
+	stride = <(480 * 4)>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 97a377b5a0ec..b492c95e5d30 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -442,8 +442,8 @@
 				 <&gcc GPLL0_VOTE>,
 				 <&gcc GPLL1_VOTE>,
 				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <0>,
-				 <0>;
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>;
 			clock-names = "xo",
 				      "mmss_gpll0_vote",
 				      "gpll0_vote",
@@ -875,8 +875,8 @@
 				offset = <0x65c>;
 
 				mode-bootloader = <0x77665500>;
-				mode-normal     = <0x77665501>;
-				mode-recovery   = <0x77665502>;
+				mode-normal = <0x77665501>;
+				mode-recovery = <0x77665502>;
 			};
 		};
 
@@ -1006,6 +1006,46 @@
 					      "ref";
 			};
 		};
+
+		gpu: adreno@fdb00000 {
+			compatible = "qcom,adreno-305.18", "qcom,adreno";
+			reg = <0xfdb00000 0x10000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			clocks = <&mmcc OXILI_GFX3D_CLK>,
+				 <&mmcc OXILICX_AHB_CLK>,
+				 <&mmcc OXILICX_AXI_CLK>;
+			clock-names = "core", "iface", "mem_iface";
+
+			sram = <&gmu_sram>;
+			power-domains = <&mmcc OXILICX_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-19000000 {
+					opp-hz = /bits/ 64 <19000000>;
+				};
+			};
+		};
 	};
 
 	thermal-zones {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
index be18f1be29a1..69fe651f564d 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
@@ -2,6 +2,7 @@
 #include <dt-bindings/input/input.h>
 
 #include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
 
 / {
 	model = "Qualcomm MSM8660 SURF";
@@ -35,30 +36,42 @@
 };
 
 &pm8058 {
-	keypad@148 {
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_FN_F1)
-			MATRIX_KEY(0, 1, KEY_UP)
-			MATRIX_KEY(0, 2, KEY_LEFT)
-			MATRIX_KEY(0, 3, KEY_VOLUMEUP)
-			MATRIX_KEY(1, 0, KEY_FN_F2)
-			MATRIX_KEY(1, 1, KEY_RIGHT)
-			MATRIX_KEY(1, 2, KEY_DOWN)
-			MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
-			MATRIX_KEY(2, 3, KEY_ENTER)
-			MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(4, 1, KEY_UP)
-			MATRIX_KEY(4, 2, KEY_LEFT)
-			MATRIX_KEY(4, 3, KEY_HOME)
-			MATRIX_KEY(4, 4, KEY_FN_F3)
-			MATRIX_KEY(5, 0, KEY_CAMERA)
-			MATRIX_KEY(5, 1, KEY_RIGHT)
-			MATRIX_KEY(5, 2, KEY_DOWN)
-			MATRIX_KEY(5, 3, KEY_BACK)
-			MATRIX_KEY(5, 4, KEY_MENU)
-			>;
-		keypad,num-rows = <6>;
-		keypad,num-columns = <5>;
+	interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8058_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_FN_F1)
+		MATRIX_KEY(0, 1, KEY_UP)
+		MATRIX_KEY(0, 2, KEY_LEFT)
+		MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+		MATRIX_KEY(1, 0, KEY_FN_F2)
+		MATRIX_KEY(1, 1, KEY_RIGHT)
+		MATRIX_KEY(1, 2, KEY_DOWN)
+		MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+		MATRIX_KEY(2, 3, KEY_ENTER)
+		MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(4, 1, KEY_UP)
+		MATRIX_KEY(4, 2, KEY_LEFT)
+		MATRIX_KEY(4, 3, KEY_HOME)
+		MATRIX_KEY(4, 4, KEY_FN_F3)
+		MATRIX_KEY(5, 0, KEY_CAMERA)
+		MATRIX_KEY(5, 1, KEY_RIGHT)
+		MATRIX_KEY(5, 2, KEY_DOWN)
+		MATRIX_KEY(5, 3, KEY_BACK)
+		MATRIX_KEY(5, 4, KEY_MENU)
+		>;
+	keypad,num-rows = <6>;
+	keypad,num-columns = <5>;
+};
+
+&rpm {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8901-regulators";
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8058-regulators";
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 78023ed2fdf7..a7c245b9c8f9 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -73,22 +73,6 @@
 		};
 	};
 
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
-	};
-
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -334,143 +318,10 @@
 			status = "disabled";
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pm8058: pmic {
-				compatible = "qcom,pm8058";
-				interrupt-parent = <&tlmm>;
-				interrupts = <88 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8058_gpio: gpio@150 {
-					compatible = "qcom,pm8058-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8058_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8058_mpps: mpps@50 {
-					compatible = "qcom,pm8058-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8058_mpps 0 0 12>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8058-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pm8058_keypad: keypad@148 {
-					compatible = "qcom,pm8058-keypad";
-					reg = <0x148>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <74 1>, <75 1>;
-					debounce = <15>;
-					scan-delay = <32>;
-					row-hold = <91500>;
-				};
-
-				xoadc: xoadc@197 {
-					compatible = "qcom,pm8058-adc";
-					reg = <0x197>;
-					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					ichg: adc-channel@3 {
-						reg = <0x00 0x03>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					ref_325mv: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-
-				rtc@1e8 {
-					compatible = "qcom,pm8058-rtc";
-					reg = <0x1e8>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <39 1>;
-					allow-set-time;
-				};
-
-				vibrator@4a {
-					compatible = "qcom,pm8058-vib";
-					reg = <0x4a>;
-				};
-
-				pm8058_led48: led@48 {
-					compatible = "qcom,pm8058-keypad-led";
-					reg = <0x48>;
-					status = "disabled";
-				};
-
-				pm8058_led131: led@131 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x131>;
-					status = "disabled";
-				};
-
-				pm8058_led132: led@132 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x132>;
-					status = "disabled";
-				};
-
-				pm8058_led133: led@133 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x133>;
-					status = "disabled";
-				};
-
-			};
 		};
 
 		l2cc: clock-controller@2082000 {
@@ -496,72 +347,6 @@
 				clocks = <&pxo_board>;
 				clock-names = "pxo";
 			};
-
-			regulators-0 {
-				compatible = "qcom,rpm-pm8901-regulators";
-
-				pm8901_l0: l0 {};
-				pm8901_l1: l1 {};
-				pm8901_l2: l2 {};
-				pm8901_l3: l3 {};
-				pm8901_l4: l4 {};
-				pm8901_l5: l5 {};
-				pm8901_l6: l6 {};
-
-				/* S0 and S1 Handled as SAW regulators by SPM */
-				pm8901_s2: s2 {};
-				pm8901_s3: s3 {};
-				pm8901_s4: s4 {};
-
-				pm8901_lvs0: lvs0 {};
-				pm8901_lvs1: lvs1 {};
-				pm8901_lvs2: lvs2 {};
-				pm8901_lvs3: lvs3 {};
-
-				pm8901_mvs: mvs {};
-			};
-
-			regulators-1 {
-				compatible = "qcom,rpm-pm8058-regulators";
-
-				pm8058_l0: l0 {};
-				pm8058_l1: l1 {};
-				pm8058_l2: l2 {};
-				pm8058_l3: l3 {};
-				pm8058_l4: l4 {};
-				pm8058_l5: l5 {};
-				pm8058_l6: l6 {};
-				pm8058_l7: l7 {};
-				pm8058_l8: l8 {};
-				pm8058_l9: l9 {};
-				pm8058_l10: l10 {};
-				pm8058_l11: l11 {};
-				pm8058_l12: l12 {};
-				pm8058_l13: l13 {};
-				pm8058_l14: l14 {};
-				pm8058_l15: l15 {};
-				pm8058_l16: l16 {};
-				pm8058_l17: l17 {};
-				pm8058_l18: l18 {};
-				pm8058_l19: l19 {};
-				pm8058_l20: l20 {};
-				pm8058_l21: l21 {};
-				pm8058_l22: l22 {};
-				pm8058_l23: l23 {};
-				pm8058_l24: l24 {};
-				pm8058_l25: l25 {};
-
-				pm8058_s0: s0 {};
-				pm8058_s1: s1 {};
-				pm8058_s2: s2 {};
-				pm8058_s3: s3 {};
-				pm8058_s4: s4 {};
-
-				pm8058_lvs0: lvs0 {};
-				pm8058_lvs1: lvs1 {};
-
-				pm8058_ncp: ncp {};
-			};
 		};
 
 		amba {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
new file mode 100644
index 000000000000..ed328b24335f
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+	model = "HTC One Mini 2";
+	compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		unknown@5b00000 {
+			reg = <0x05b00000 0x200000>;
+			no-map;
+		};
+
+		unknown@7500000 {
+			reg = <0x07500000 0xb00000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8000000 {
+			reg = <0x08000000 0x4f00000>;
+			no-map;
+		};
+
+		unknown@cf00000 {
+			reg = <0x0cf00000 0x200000>;
+			no-map;
+		};
+
+		mba_region: mba@d100000 {
+			reg = <0x0d100000 0x3a000>;
+			no-map;
+		};
+
+		unknown@d13a000 {
+			reg = <0x0d13a000 0xc6000>;
+			no-map;
+		};
+
+		wcnss_region: wcnss@d200000 {
+			reg = <0x0d200000 0x650000>;
+			no-map;
+		};
+
+		unknown@d850000 {
+			reg = <0x0d850000 0x3b0000>;
+			no-map;
+		};
+
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1400000>;
+			no-map;
+		};
+
+		unknown@f000000 {
+			reg = <0x0f000000 0x500000>;
+			no-map;
+		};
+
+		venus_region: venus@f500000 {
+			reg = <0x0f500000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		unknown@fb00000 {
+			reg = <0x0fb00000 0x1b00000>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/msm8926/memul/adsp.mbn";
+	status = "okay";
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	magnetometer@d {
+		compatible = "asahi-kasei,ak8963";
+		reg = <0x0d>;
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&pm8226_l19>;
+		vid-supply = <&pm8226_l28>;
+	};
+
+	accelerometer@18 {
+		compatible = "bosch,bma250e";
+		reg = <0x18>;
+		interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_l28>;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	/* TFA9887 @ 34 */
+	/* TFA9887 @ 35 */
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+
+		syna,startup-delay-ms = <160>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	/* NCP6924 Camera Regulators @ 10 */
+	/* PN544 NFC @ 28 */
+	/* TPS61310 Flash/Torch @ 33 */
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1750000>;
+	qcom,fast-charge-current-limit = <1750000>;
+	qcom,fast-charge-safe-voltage = <4360000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4300000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
new file mode 100644
index 000000000000..9b48661d69c5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c3 instead */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Nokia Lumia 735";
+	compatible = "microsoft,superman-lte", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
new file mode 100644
index 000000000000..53a6d4e85959
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c1 instead */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Nokia Lumia 830";
+	compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "disabled";
+};
+
+&gpio_keys {
+	key-camera-snapshot {
+		label = "Camera Snapshot";
+		gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_CAMERA>;
+	};
+
+	key-camera-focus {
+		label = "Camera Focus";
+		gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_CAMERA_FOCUS>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
new file mode 100644
index 000000000000..0cbe2d2fbbb1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+	model = "Motorola Moto G 4G (2013)";
+	compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	sensor@48 {
+		compatible = "ti,tmp108";
+		reg = <0x48>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-boot-on;
+		};
+
+		pm8226_lvs1: lvs1 {
+			/* Pull-up for I2C lines */
+			regulator-always-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <2000000>;
+	qcom,fast-charge-current-limit = <1900000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index 6c1bc3818883..36f4c997b0b3 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -2,6 +2,7 @@
 #include <dt-bindings/input/input.h>
 
 #include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
 
 / {
 	model = "Qualcomm MSM8960 CDP";
@@ -88,17 +89,21 @@
 	};
 };
 
-&pmicintc {
-	keypad@148 {
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_VOLUMEUP)
-			MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
-			MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(0, 3, KEY_CAMERA)
-			>;
-		keypad,num-rows = <1>;
-		keypad,num-columns = <5>;
-	};
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+		MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(0, 3, KEY_CAMERA)
+		>;
+	keypad,num-rows = <1>;
+	keypad,num-columns = <5>;
+
+	status = "okay";
 };
 
 &rpm {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index 13e85c287498..1a5116336ff0 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
 
 #include "qcom-msm8960.dtsi"
-#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include "pm8921.dtsi"
 
 / {
 	model = "Samsung Galaxy Express SGH-I437";
@@ -84,6 +85,10 @@
 	};
 };
 
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &rpm {
 	regulators {
 		compatible = "qcom,rpm-pm8921-regulators";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index d13080fcbeea..f420740e068e 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -200,10 +200,6 @@
 				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-			};
 		};
 
 		acc0: clock-controller@2088000 {
@@ -259,49 +255,10 @@
 			};
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&msmgpio>;
-				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				keypad@148 {
-					compatible = "qcom,pm8921-keypad";
-					reg = <0x148>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <74 IRQ_TYPE_EDGE_RISING>,
-						     <75 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15>;
-					scan-delay = <32>;
-					row-hold = <91500>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-			};
 		};
 
 		rng@1a500000 {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index 60bdfddeae69..4aaae8537a3f 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -60,6 +60,33 @@
 		enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
 	};
 
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
 	vreg_wlan: wlan-regulator {
 		compatible = "regulator-fixed";
 
@@ -340,6 +367,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -347,6 +375,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
index 68a2f9094e53..d34659ebac22 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -65,6 +65,33 @@
 			pmsg-size = <0x80000>;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -190,6 +217,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -197,6 +225,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
@@ -425,6 +454,8 @@
 	qcom,fast-charge-low-threshold-voltage = <3400000>;
 	qcom,auto-recharge-threshold-voltage = <4200000>;
 	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index 0bc2e66d15b1..b1413983787c 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -346,6 +346,20 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		saw_l2: power-controller@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		watchdog@f9017000 {
+			compatible = "qcom,apss-wdt-msm8974", "qcom,kpss-wdt";
+			reg = <0xf9017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -405,52 +419,46 @@
 			};
 		};
 
-		saw0: power-controller@f9089000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw1: power-controller@f9099000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw2: power-controller@f90a9000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw3: power-controller@f90b9000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw_l2: power-controller@f9012000 {
-			compatible = "qcom,saw2";
-			reg = <0xf9012000 0x1000>;
-			regulator;
-		};
-
 		acc0: power-manager@f9088000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw0: power-controller@f9089000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc1: power-manager@f9098000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw1: power-controller@f9099000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc2: power-manager@f90a8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw2: power-controller@f90a9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc3: power-manager@f90b8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw3: power-controller@f90b9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		sdhc_1: mmc@f9824900 {
 			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
@@ -1063,6 +1071,15 @@
 			};
 		};
 
+		bimc: interconnect@fc380000 {
+			reg = <0xfc380000 0x6a000>;
+			compatible = "qcom,msm8974-bimc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
 		gcc: clock-controller@fc400000 {
 			compatible = "qcom,gcc-msm8974";
 			#clock-cells = <1>;
@@ -1101,22 +1118,13 @@
 			};
 		};
 
-		bimc: interconnect@fc380000 {
-			reg = <0xfc380000 0x6a000>;
-			compatible = "qcom,msm8974-bimc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-			         <&rpmcc RPM_SMD_BIMC_A_CLK>;
-		};
-
 		snoc: interconnect@fc460000 {
 			reg = <0xfc460000 0x4000>;
 			compatible = "qcom,msm8974-snoc";
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-			         <&rpmcc RPM_SMD_SNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		pnoc: interconnect@fc468000 {
@@ -1125,7 +1133,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-			         <&rpmcc RPM_SMD_PNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_PNOC_A_CLK>;
 		};
 
 		ocmemnoc: interconnect@fc470000 {
@@ -1134,7 +1142,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
-			         <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+				 <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
 		};
 
 		mmssnoc: interconnect@fc478000 {
@@ -1143,7 +1151,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&mmcc MMSS_S0_AXI_CLK>,
-			         <&mmcc MMSS_S0_AXI_CLK>;
+				 <&mmcc MMSS_S0_AXI_CLK>;
 		};
 
 		cnoc: interconnect@fc480000 {
@@ -1152,7 +1160,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@fc4a9000 {
@@ -1633,13 +1641,6 @@
 					bias-pull-up;
 					drive-strength = <2>;
 				};
-
-				cd-pins {
-					pins = "gpio54";
-					function = "gpio";
-					bias-disable;
-					drive-strength = <2>;
-				};
 			};
 
 			blsp1_uart2_default: blsp1-uart2-default-state {
@@ -2408,31 +2409,4 @@
 			     <GIC_PPI 1 0xf08>;
 		clock-frequency = <19200000>;
 	};
-
-	vreg_boost: vreg-boost {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg-boost";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&boost_bypass_n_pin>;
-	};
-
-	vreg_vph_pwr: vreg-vph-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "vph-pwr";
-
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		regulator-always-on;
-	};
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
index 42d253b75dad..fe227fd3f908 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -57,6 +57,33 @@
 		enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
 		vcc-supply = <&pm8941_l18>;
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -381,6 +408,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4350000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
 	qcom,minimum-input-voltage = <4450000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
index 8230d0e1d95d..4c8edadea0ac 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
@@ -51,6 +51,33 @@
 			debounce-interval = <150>;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c1 {
@@ -433,6 +460,10 @@
 	status = "okay";
 };
 
+&smbb {
+	status = "okay";
+};
+
 &tlmm {
 	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
 		pins = "gpio68";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
index 3e2c86591ee2..b93539e2b87e 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/leds/common.h>
@@ -155,7 +155,15 @@
 		enable-active-high;
 	};
 
-	/delete-node/ vreg-boost;
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -355,7 +363,6 @@
 		vddr-supply = <&vreg_panel>;
 
 		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
-		te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 
 		port {
 			panel_in: endpoint {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 11468d1409f7..ee94741a26ed 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -84,6 +84,33 @@
 		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
 	};
 
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
 	vreg_wlan: wlan-regulator {
 		compatible = "regulator-fixed";
 
@@ -297,6 +324,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -304,6 +332,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
@@ -558,6 +587,8 @@
 	qcom,fast-charge-low-threshold-voltage = <3400000>;
 	qcom,auto-recharge-threshold-voltage = <4200000>;
 	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
index 7e97ad5803d8..247069361909 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
@@ -9,7 +9,7 @@
 #include "qcom-sdx55.dtsi"
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pm8150b.dtsi>
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX55 MTP";
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
index 51058b065279..082f7ed1a01f 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Thundercomm T55 Development Kit";
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
index 8fadc6e70692..e336a15b45c4 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Telit FN980 TLB";
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 2aa5089a8513..27429d0fedfb 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -228,31 +228,26 @@
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx55-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00ff6000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
-
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6200 0x170>,
-				      <0x00ff6400 0x200>,
-				      <0x00ff6800 0x800>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			status = "disabled";
 		};
 
 		mc_virt: interconnect@1100000 {
@@ -345,10 +340,10 @@
 					  "msi8";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
 				 <&gcc GCC_PCIE_AUX_CLK>,
@@ -436,9 +431,9 @@
 			status = "disabled";
 		};
 
-		pcie_phy: phy@1c07000 {
+		pcie_phy: phy@1c06000 {
 			compatible = "qcom,sdx55-qmp-pcie-phy";
-			reg = <0x01c07000 0x2000>;
+			reg = <0x01c06000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -585,10 +580,10 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 51 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -603,7 +598,7 @@
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -612,7 +607,7 @@
 			compatible = "qcom,sdx55-pdc", "qcom,pdc";
 			reg = <0x0b210000 0x30000>;
 			qcom,pdc-ranges = <0 179 52>;
-			#interrupt-cells = <3>;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&intc>;
 			interrupt-controller;
 		};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
index 9649c859a2c3..07c10c84eefa 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
@@ -12,7 +12,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pmk8350.dtsi>
 #include <arm64/qcom/pm7250b.dtsi>
-#include "qcom-pmx65.dtsi"
+#include "pmx65.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX65 MTP";
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index e559adaaeee7..40591a4da6a4 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -204,8 +204,16 @@
 		gcc: clock-controller@100000 {
 			compatible = "qcom,gcc-sdx65";
 			reg = <0x00100000 0x001f7400>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
-			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <&pcie_phy>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk",
+				      "pcie_pipe_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
 			#power-domain-cells = <1>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -233,32 +241,27 @@
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c8>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00ff6000 0x2000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_EN>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_EN>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
 			status = "disabled";
 
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6e00 0x160>,
-				      <0x00ff7000 0x1ec>,
-				      <0x00ff6200 0x1e00>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
 		};
 
 		system_noc: interconnect@1620000 {
@@ -338,7 +341,7 @@
 			power-domains = <&gcc PCIE_GDSC>;
 
 			phys = <&pcie_phy>;
-			phy-names = "pcie-phy";
+			phy-names = "pciephy";
 
 			max-link-speed = <3>;
 			num-lanes = <2>;
@@ -520,7 +523,7 @@
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -530,7 +533,7 @@
 			reg = <0x0c264000 0x1000>;
 		};
 
-		spmi_bus: qcom,spmi@c440000 {
+		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xc440000 0xd00>,
 				<0xc600000 0x2000000>,
diff --git a/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi
index e10f99278c77..de52218ceaa4 100644
--- a/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi
+++ b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi
@@ -27,6 +27,15 @@
 			};
 		};
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &can1 {
@@ -69,6 +78,12 @@
 		clocks = <&cec_clock>;
 		clock-names = "cec";
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts
index d21e00e1f401..e1ac2c161e73 100644
--- a/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts
@@ -132,7 +132,7 @@
 		i2c-gpio,delay-us = <5>;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
@@ -143,6 +143,18 @@
 		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
 	};
 
+	panel {
+		compatible = "ampire,am-800480l1tmqw-t00h";
+		backlight = <&backlight>;
+		power-supply = <&reg_5p0v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdc0_rgb>;
+			};
+		};
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 
@@ -228,10 +240,22 @@
 	};
 };
 
-&pfc {
+&lcdc0 {
 	pinctrl-0 = <&lcd0_pins>;
 	pinctrl-names = "default";
 
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pfc {
 	ether_pins: ether {
 		groups = "gether_mii", "gether_int";
 		function = "gether";
diff --git a/arch/arm/boot/dts/renesas/r8a7740.dtsi b/arch/arm/boot/dts/renesas/r8a7740.dtsi
index 1b2cf5fa322b..55884ec701f8 100644
--- a/arch/arm/boot/dts/renesas/r8a7740.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7740.dtsi
@@ -398,6 +398,61 @@
 		status = "disabled";
 	};
 
+	lcdc0: lcd-controller@fe940000 {
+		compatible = "renesas,r8a7740-lcdc";
+		reg = <0xfe940000 0x4000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_LCDC0>,
+			 <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk0_clk>,
+			 <&vou_clk>;
+		clock-names = "fck", "media", "lclk", "video";
+		power-domains = <&pd_a4lc>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lcdc0_rgb: endpoint {
+				};
+			};
+		};
+	};
+
+	lcdc1: lcd-controller@fe944000 {
+		compatible = "renesas,r8a7740-lcdc";
+		reg = <0xfe944000 0x4000>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_LCDC1>,
+			 <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk1_clk>,
+			 <&vou_clk>;
+		clock-names = "fck", "media", "lclk", "video";
+		power-domains = <&pd_a4lc>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lcdc1_rgb: endpoint {
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lcdc1_hdmi: endpoint {
+				};
+			};
+		};
+	};
+
 	tmu0: timer@fff80000 {
 		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
 		reg = <0xfff80000 0x2c>;
@@ -474,6 +529,16 @@
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
+		lcdlclk0_clk: lcdlclk0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		lcdlclk1_clk: lcdlclk1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
 
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
diff --git a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
index b1f679da36b2..a0b574398055 100644
--- a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
+++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
@@ -34,6 +34,15 @@
 			};
 		};
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &du {
@@ -81,6 +90,12 @@
 		clock-names = "cec";
 		pd-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts
index c105932f642e..24411044ef6c 100644
--- a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts
@@ -182,7 +182,7 @@
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	stmpe811@44 {
+	port-expander@44 {
 		compatible = "st,stmpe811";
 		reg = <0x44>;
 		interrupt-parent = <&gpio4>;
@@ -197,7 +197,7 @@
 		/* internal ADC reference */
 		st,ref-sel = <0>;
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
diff --git a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts
index 08ea149b1ee6..9b13e8d1538b 100644
--- a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts
@@ -52,10 +52,10 @@
 		states = <3300000 1>, <1800000 0>;
 	};
 
-	keyboard-irq {
+	keypad-0 {
 		compatible = "gpio-keys";
 
-		pinctrl-0 = <&keyboard_irq_pins>;
+		pinctrl-0 = <&keypad0_pins>;
 		pinctrl-names = "default";
 
 		interrupt-parent = <&gpio0>;
@@ -76,11 +76,11 @@
 		};
 	};
 
-	keyboard-gpio {
+	keypad-1 {
 		compatible = "gpio-keys-polled";
 		poll-interval = <50>;
 
-		pinctrl-0 = <&keyboard_gpio_pins>;
+		pinctrl-0 = <&keypad1_pins>;
 		pinctrl-names = "default";
 
 		key-3 {
@@ -193,7 +193,7 @@
 };
 
 &gpio0 {
-	keyboard-irq-hog {
+	keypad0-hog {
 		gpio-hog;
 		gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>;
 		input;
@@ -215,6 +215,35 @@
 };
 
 &lbsc {
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x04000000>;
+		pinctrl-0 = <&flash_pins>;
+		pinctrl-names = "default";
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "uboot-env";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "flash";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+
 	ethernet@18000000 {
 		compatible = "smsc,lan89218", "smsc,lan9115";
 		reg = <0x18000000 0x100>;
@@ -266,6 +295,11 @@
 		};
 	};
 
+	flash_pins: flash {
+		groups = "lbsc_cs0";
+		function = "lbsc";
+	};
+
 	scif2_pins: scif2 {
 		groups = "scif2_data_c";
 		function = "scif2";
@@ -286,11 +320,11 @@
 		function = "hspi0";
 	};
 
-	keyboard_irq_pins: keyboard-irq {
+	keypad0_pins: keypad-0 {
 		pins = "GP_0_17", "GP_0_18";
 		bias-pull-up;
 	};
-	keyboard_gpio_pins: keyboard-gpio {
+	keypad1_pins: keypad-1 {
 		pins = "GP_0_19", "GP_0_20";
 		bias-pull-up;
 	};
diff --git a/arch/arm/boot/dts/renesas/r8a7790-lager.dts b/arch/arm/boot/dts/renesas/r8a7790-lager.dts
index 4d666ad8b114..8590981245a6 100644
--- a/arch/arm/boot/dts/renesas/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/renesas/r8a7790-lager.dts
@@ -122,6 +122,15 @@
 		};
 	};
 
+	fixedregulator1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -303,7 +312,7 @@
 	 *
 	 * IIC0/I2C0 does not appear to support fallback to GPIO.
 	 */
-	i2cexio0: i2c-10 {
+	i2cexio0: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic0>, <&i2c0>;
 		i2c-bus-name = "i2c-exio0";
@@ -316,7 +325,7 @@
 	 * This is similar to the arangement described for i2cexio0 (above)
 	 * with a fallback to GPIO also provided.
 	 */
-	i2cexio1: i2c-11 {
+	i2cexio1: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-exio1";
@@ -328,7 +337,7 @@
 	 * IIC2 and I2C2 may be switched using pinmux.
 	 * A fallback to GPIO is also provided.
 	 */
-	i2chdmi: i2c-12 {
+	i2chdmi: i2c-mux3 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -361,6 +370,12 @@
 			clocks = <&cec_clock>;
 			clock-names = "cec";
 
+			avdd-supply = <&fixedregulator1v8>;
+			dvdd-supply = <&fixedregulator1v8>;
+			pvdd-supply = <&fixedregulator1v8>;
+			dvdd-3v-supply = <&fixedregulator3v3>;
+			bgvdd-supply = <&fixedregulator1v8>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -417,7 +432,7 @@
 	 * IIC3 and I2C3 may be switched using pinmux.
 	 * IIC3/I2C3 does not appear to support fallback to GPIO.
 	 */
-	i2cpwr: i2c-13 {
+	i2cpwr: i2c-mux4 {
 		compatible = "i2c-demux-pinctrl";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_irq_pins>;
@@ -432,6 +447,7 @@
 			interrupt-parent = <&irqc0>;
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 
 			rtc {
 				compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7790-stout.dts b/arch/arm/boot/dts/renesas/r8a7790-stout.dts
index fe14727eefe1..683f7395fab0 100644
--- a/arch/arm/boot/dts/renesas/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/renesas/r8a7790-stout.dts
@@ -44,6 +44,15 @@
 		};
 	};
 
+	fixedregulator1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -296,6 +305,12 @@
 		clocks = <&osc4_clk>;
 		clock-names = "cec";
 
+		avdd-supply = <&fixedregulator1v8>;
+		dvdd-supply = <&fixedregulator1v8>;
+		pvdd-supply = <&fixedregulator1v8>;
+		dvdd-3v-supply = <&fixedregulator3v3>;
+		bgvdd-supply = <&fixedregulator1v8>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -332,6 +347,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
index 545515b41ea3..0efd9f98c75a 100644
--- a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
@@ -174,6 +174,24 @@
 		};
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -340,7 +358,7 @@
 	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio1: i2c-12 {
+	i2cexio1: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-exio1";
@@ -351,7 +369,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-13 {
+	i2chdmi: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -384,6 +402,12 @@
 			clocks = <&cec_clock>;
 			clock-names = "cec";
 
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -446,7 +470,7 @@
 	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-14 {
+	i2cexio4: i2c-mux3 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -795,6 +819,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
index ec0a20d5130d..93c86e921645 100644
--- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
@@ -47,6 +47,24 @@
 		reg = <2 0x00000000 0 0x40000000>;
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -148,7 +166,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-10 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -179,6 +197,12 @@
 			interrupt-parent = <&gpio3>;
 			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -389,6 +413,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		watchdog {
 			compatible = "dlg,da9063-watchdog";
diff --git a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
index e793134f32a3..540a9ad28f28 100644
--- a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
@@ -30,6 +30,15 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	d1_8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -182,6 +191,35 @@
 };
 
 &lbsc {
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0x00000000 0x04000000>;
+		pinctrl-0 = <&flash_pins>;
+		pinctrl-names = "default";
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "uboot-env";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "flash";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+
 	ethernet@18000000 {
 		compatible = "smsc,lan89218", "smsc,lan9115";
 		reg = <0x18000000 0x100>;
@@ -240,6 +278,11 @@
 		function = "du1";
 	};
 
+	flash_pins: flash {
+		groups = "lbsc_cs0";
+		function = "lbsc";
+	};
+
 	keyboard_pins: keyboard {
 		pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2";
 		bias-pull-up;
@@ -296,6 +339,12 @@
 		interrupt-parent = <&irqc>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -332,6 +381,7 @@
 		interrupt-parent = <&irqc>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7792-wheat.dts b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts
index f87e78fe3f6e..000f21a2a863 100644
--- a/arch/arm/boot/dts/renesas/r8a7792-wheat.dts
+++ b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts
@@ -29,6 +29,15 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	d1_8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -254,6 +263,12 @@
 		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
 		reg-names = "main", "edid", "cec", "packet";
 
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -283,6 +298,12 @@
 		reg = <0x39>, <0x49>, <0x29>, <0x59>;
 		reg-names = "main", "edid", "cec", "packet";
 
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/arch/arm/boot/dts/renesas/r8a7793-gose.dts b/arch/arm/boot/dts/renesas/r8a7793-gose.dts
index 79b537b24642..1ea6c757893b 100644
--- a/arch/arm/boot/dts/renesas/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/renesas/r8a7793-gose.dts
@@ -165,6 +165,24 @@
 		};
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -324,7 +342,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-11 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -368,6 +386,12 @@
 			interrupt-parent = <&gpio3>;
 			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -430,7 +454,7 @@
 	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-12 {
+	i2cexio4: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -735,6 +759,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7794-alt.dts b/arch/arm/boot/dts/renesas/r8a7794-alt.dts
index 08df031bc27c..b5ecafbb2e4d 100644
--- a/arch/arm/boot/dts/renesas/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/renesas/r8a7794-alt.dts
@@ -192,7 +192,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C1.
 	 */
-	i2chdmi: i2c-11 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-hdmi";
@@ -222,7 +222,7 @@
 	 * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-14 {
+	i2cexio4: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -453,6 +453,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7794-silk.dts b/arch/arm/boot/dts/renesas/r8a7794-silk.dts
index b7af1befa126..595e074085eb 100644
--- a/arch/arm/boot/dts/renesas/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/renesas/r8a7794-silk.dts
@@ -102,6 +102,15 @@
 		};
 	};
 
+	d1_8v: regulator-d1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-d3-3v {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -225,7 +234,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C1.
 	 */
-	i2chdmi: i2c-10 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-hdmi";
@@ -256,6 +265,12 @@
 			interrupt-parent = <&gpio5>;
 			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
 
+			avdd-supply = <&d1_8v>;
+			dvdd-supply = <&d1_8v>;
+			pvdd-supply = <&d1_8v>;
+			dvdd-3v-supply = <&d3_3v>;
+			bgvdd-supply = <&d1_8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -424,6 +439,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
index 0fa565a1c3ad..fa63e1afc4ef 100644
--- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
@@ -437,7 +437,7 @@
 		};
 
 		can0: can@52104000 {
-			compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000";
+			compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
 			reg = <0x52104000 0x800>;
 			reg-io-width = <4>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile
index 0f46e18fe275..ab4cd9aab722 100644
--- a/arch/arm/boot/dts/rockchip/Makefile
+++ b/arch/arm/boot/dts/rockchip/Makefile
@@ -2,7 +2,9 @@
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rv1108-elgin-r1.dtb \
 	rv1108-evb.dtb \
+	rv1109-sonoff-ihost.dtb \
 	rv1126-edgeble-neu2-io.dtb \
+	rv1126-sonoff-ihost.dtb \
 	rk3036-evb.dtb \
 	rk3036-kylin.dtb \
 	rk3066a-bqcurie2.dtb \
@@ -10,6 +12,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3066a-mk808.dtb \
 	rk3066a-rayeager.dtb \
 	rk3128-evb.dtb \
+	rk3128-xpi-3128.dtb \
 	rk3188-bqedison2qc.dtb \
 	rk3188-px3-evb.dtb \
 	rk3188-radxarock.dtb \
diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
index 67e1e04139e7..e32c73d32f0a 100644
--- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
@@ -8,11 +8,26 @@
 	model = "Rockchip RK3036 KylinBoard";
 	compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
 
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x20000000>;
 	};
 
+	hdmi_con: hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 
@@ -110,6 +125,12 @@
 	status = "okay";
 };
 
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 
diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi
index 78686fc72ce6..04af224005f8 100644
--- a/arch/arm/boot/dts/rockchip/rk3036.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi
@@ -17,6 +17,9 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -282,7 +285,6 @@
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
-		rockchip,default-sample-phase = <158>;
 		disable-wp;
 		dmas = <&pdma 12>;
 		dma-names = "rx-tx";
@@ -402,12 +404,20 @@
 		pinctrl-0 = <&hdmi_ctl>;
 		status = "disabled";
 
-		hdmi_in: port {
+		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			hdmi_in_vop: endpoint@0 {
+
+			hdmi_in: port@0 {
 				reg = <0>;
-				remote-endpoint = <&vop_out_hdmi>;
+
+				hdmi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/rockchip/rk3066a.dtsi b/arch/arm/boot/dts/rockchip/rk3066a.dtsi
index de9915d946f7..30139f21de64 100644
--- a/arch/arm/boot/dts/rockchip/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3066a.dtsi
@@ -13,6 +13,11 @@
 / {
 	compatible = "rockchip,rk3066a";
 
+	aliases {
+		gpio4 = &gpio4;
+		gpio6 = &gpio6;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/rockchip/rk3128-evb.dts b/arch/arm/boot/dts/rockchip/rk3128-evb.dts
index c38f42497cbd..c7ab7fcdb436 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-evb.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-evb.dts
@@ -12,11 +12,6 @@
 	compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
 
 	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
-		i2c1 = &i2c1;
 		mmc0 = &emmc;
 	};
 
diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
new file mode 100644
index 000000000000..03a97881519a
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3128.dtsi"
+
+/ {
+	model = "Geniatech XPI-3128";
+	compatible = "geniatech,xpi-3128", "rockchip,rk3128";
+
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <3300000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	dc_5v: dc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * This is a vbus-supply, which also supplies the GL852G usb hub,
+	 * thus has to be always-on
+	 */
+	host_pwr_5v: host-pwr-5v-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1500>;
+		regulator-name = "HOST_PWR_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_drv>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_led>;
+		};
+
+		led-spd {
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			/*
+			 * currently not allowed to be set as per
+			 * https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml
+			 * and needs to set in userspace:
+			 *
+			 * linux,default-trigger = "netdev";
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&spd_led>;
+		};
+	};
+
+	mcu3v3: mcu3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "MCU3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_ddr: vcc-ddr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DDR";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_io: vcc-io-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_IO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_LAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: vcc-sd-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <500>;
+		regulator-name = "VCC_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwren>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc33_hdmi: vcc33-hdmi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC33_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcca_33>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcca_33: vcca-33-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCA_33";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_11: vdd-11-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_11";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd11_hdmi: vdd11-hdmi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD11_HDMI";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vdd_11>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_arm: vdd-arm-regulator {
+		compatible = "pwm-regulator";
+		regulator-name = "VDD_ARM";
+		pwms = <&pwm1 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * As per schematics vdd_log is minimum 900 mV, maximum 1400 mV.
+	 * Since there are HW blocks in PD_LOGIC (which are all driven by
+	 * this supply), that either do not have a driver at all or the
+	 * driver does not implement regulator support we have to make
+	 * sure here that the voltage never drops below 1050 mV.
+	 */
+	vdd_log: vdd-log-regulator {
+		compatible = "pwm-regulator";
+		regulator-name = "VDD_LOG";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-dutycycle-range = <30 100>;
+		pwm-supply = <&vcc_sys>;
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <4000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	vmmc-supply = <&vcc_io>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	cap-mmc-highspeed;
+	mmc-ddr-3_3v;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+	assigned-clocks = <&cru SCLK_MAC_SRC>;
+	assigned-clock-rates= <50000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names = /* GPIO0 A0-A7 */
+			  "", "", "HEADER_5", "HEADER_3",
+			  "", "", "", "",
+			  /* GPIO0 B0-B7 */
+			  "HEADER_22", "HEADER_23", "", "HEADER_19",
+			  "HEADER_26", "HEADER_21", "HEADER_24", "",
+			  /* GPIO0 C0-C7 */
+			  "", "HEADER_18", "", "",
+			  "", "", "", "",
+			  /* GPIO0 D0-D7 */
+			  "HEADER_36", "", "", "",
+			  "", "", "HEADER_13", "";
+};
+
+&gpio1 {
+	gpio-line-names = /* GPIO1 A0-A7 */
+			  "HEADER_7", "HEADER_35", "HEADER_33", "HEADER_37",
+			  "HEADER_40", "HEADER_38", "", "",
+			  /* GPIO1 B0-B7 */
+			  "HEADER_11", "", "", "HEADER_29",
+			  "HEADER_31", "", "", "",
+			  /* GPIO1 C0-C7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO1 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names = /* GPIO2 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO2 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO2 C0-C7 */
+			  "", "", "", "",
+			  "HEADER_27", "", "", "",
+			  /* GPIO2 D0-D7 */
+			  "", "", "HEADER_8", "HEADER_10",
+			  "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names = /* GPIO3 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO3 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO3 C0-C7 */
+			  "", "HEADER_32", "", "",
+			  "", "", "", "HEADER_12",
+			  /* GPIO3 D0-D7 */
+			  "", "", "", "HEADER_15",
+			  "", "", "", "";
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
+&mdio {
+	phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		max-speed = <100>;
+		/* T2.2.4 min. 1 us */
+		reset-assert-us = <10>;
+		/* T2.2.1 + T2.2.2 + T2.2.3 min. 6.05 us */
+		reset-deassert-us = <20>;
+		reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp83848c_rst>;
+	};
+};
+
+&pinctrl {
+	dp83848c {
+		dp83848c_rst: dp83848c-rst {
+			rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir-receiver {
+		ir_int: ir-int {
+			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		power_led: power-led {
+			rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		spd_led: spd-led {
+			rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		host_drv: host-drv {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	vmmc-supply = <&vcc_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	vusb_a-supply = <&vcc_io>;
+	vusb_d-supply = <&vdd_11>;
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb2phy_host {
+	status = "okay";
+};
+
+&usb2phy_otg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
index 01edf244ddee..e2264c40b924 100644
--- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3128-power.h>
 
 / {
 	compatible = "rockchip,rk3128";
@@ -15,6 +16,20 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
 	arm-pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -100,6 +115,27 @@
 		};
 	};
 
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <975000 975000 1250000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1050000 1050000 1250000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <1250000 1250000 1250000>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
@@ -130,9 +166,119 @@
 		};
 	};
 
+	gpu: gpu@10090000 {
+		compatible = "rockchip,rk3128-mali", "arm,mali-400";
+		reg = <0x10090000 0x10000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp",
+				  "gpmmu",
+				  "pp0",
+				  "ppmmu0",
+				  "pp1",
+				  "ppmmu1";
+		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
+		clock-names = "bus", "core";
+		operating-points-v2 = <&gpu_opp_table>;
+		resets = <&cru SRST_GPU>;
+		power-domains = <&power RK3128_PD_GPU>;
+		status = "disabled";
+	};
+
 	pmu: syscon@100a0000 {
 		compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
 		reg = <0x100a0000 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3128-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-domain@RK3128_PD_VIO {
+				reg = <RK3128_PD_VIO>;
+				clocks = <&cru ACLK_CIF>,
+					 <&cru HCLK_CIF>,
+					 <&cru DCLK_EBC>,
+					 <&cru HCLK_EBC>,
+					 <&cru ACLK_IEP>,
+					 <&cru HCLK_IEP>,
+					 <&cru ACLK_LCDC0>,
+					 <&cru HCLK_LCDC0>,
+					 <&cru PCLK_MIPI>,
+					 <&cru ACLK_RGA>,
+					 <&cru HCLK_RGA>,
+					 <&cru ACLK_VIO0>,
+					 <&cru ACLK_VIO1>,
+					 <&cru HCLK_VIO>,
+					 <&cru HCLK_VIO_H2P>,
+					 <&cru DCLK_VOP>,
+					 <&cru SCLK_VOP>;
+				pm_qos = <&qos_ebc>,
+					 <&qos_iep>,
+					 <&qos_lcdc>,
+					 <&qos_rga>,
+					 <&qos_vip>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3128_PD_VIDEO {
+				reg = <RK3128_PD_VIDEO>;
+				clocks = <&cru ACLK_VDPU>,
+					 <&cru HCLK_VDPU>,
+					 <&cru ACLK_VEPU>,
+					 <&cru HCLK_VEPU>,
+					 <&cru SCLK_HEVC_CORE>;
+				pm_qos = <&qos_vpu>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3128_PD_GPU {
+				reg = <RK3128_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	qos_gpu: qos@1012d000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012d000 0x20>;
+	};
+
+	qos_vpu: qos@1012e000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012e000 0x20>;
+	};
+
+	qos_rga: qos@1012f000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f000 0x20>;
+	};
+
+	qos_ebc: qos@1012f080 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f080 0x20>;
+	};
+
+	qos_iep: qos@1012f100 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f100 0x20>;
+	};
+
+	qos_lcdc: qos@1012f180 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f180 0x20>;
+	};
+
+	qos_vip: qos@1012f200 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f200 0x20>;
 	};
 
 	gic: interrupt-controller@10139000 {
@@ -154,6 +300,9 @@
 		clocks = <&cru HCLK_OTG>;
 		clock-names = "otg";
 		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
 		phys = <&usb2phy_otg>;
 		phy-names = "usb2-phy";
 		status = "disabled";
@@ -163,6 +312,7 @@
 		compatible = "generic-ehci";
 		reg = <0x101c0000 0x20000>;
 		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST2>;
 		phys = <&usb2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -172,6 +322,7 @@
 		compatible = "generic-ohci";
 		reg = <0x101e0000 0x20000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST2>;
 		phys = <&usb2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -261,6 +412,8 @@
 			clocks = <&cru SCLK_OTGPHY0>;
 			clock-names = "phyclk";
 			clock-output-names = "usb480m_phy";
+			assigned-clocks = <&cru SCLK_USB480M>;
+			assigned-clock-parents = <&usb2phy>;
 			#clock-cells = <0>;
 			status = "disabled";
 
@@ -518,6 +671,34 @@
 		#dma-cells = <1>;
 	};
 
+	gmac: ethernet@2008c000 {
+		compatible = "rockchip,rk3128-gmac";
+		reg = <0x2008c000 0x4000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru SCLK_MAC>,
+			 <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+			 <&cru SCLK_MAC_REF>, <&cru SCLK_MAC_REFOUT>,
+			 <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth",
+			      "mac_clk_rx", "mac_clk_tx",
+			      "clk_mac_ref", "clk_mac_refout",
+			      "aclk_mac", "pclk_mac";
+		resets = <&cru SRST_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		rx-fifo-depth = <4096>;
+		tx-fifo-depth = <2048>;
+		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3128-pinctrl";
 		rockchip,grf = <&grf>;
@@ -843,6 +1024,10 @@
 				rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
 			};
 
+			sdmmc_det: sdmmc-det {
+				rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>;
+			};
+
 			sdmmc_wp: sdmmc-wp {
 				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>;
 			};
diff --git a/arch/arm/boot/dts/rockchip/rk322x.dtsi b/arch/arm/boot/dts/rockchip/rk322x.dtsi
index a721744cbfd1..831561fc1814 100644
--- a/arch/arm/boot/dts/rockchip/rk322x.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk322x.dtsi
@@ -15,6 +15,10 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
diff --git a/arch/arm/boot/dts/rockchip/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi
index cb9cdaddffd4..ead343dc3df1 100644
--- a/arch/arm/boot/dts/rockchip/rk3288.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi
@@ -19,6 +19,15 @@
 
 	aliases {
 		ethernet0 = &gmac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+		gpio8 = &gpio8;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git a/arch/arm/boot/dts/rockchip/rk3xxx.dtsi b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
index cb4e42ede56a..f37137f298d5 100644
--- a/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
@@ -16,6 +16,10 @@
 
 	aliases {
 		ethernet0 = &emac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git a/arch/arm/boot/dts/rockchip/rv1108.dtsi b/arch/arm/boot/dts/rockchip/rv1108.dtsi
index abf3006f0a84..f3291f3bbc6f 100644
--- a/arch/arm/boot/dts/rockchip/rv1108.dtsi
+++ b/arch/arm/boot/dts/rockchip/rv1108.dtsi
@@ -196,7 +196,6 @@
 	pwm4: pwm@10280000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280000 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -208,7 +207,6 @@
 	pwm5: pwm@10280010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280010 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -220,7 +218,6 @@
 	pwm6: pwm@10280020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280020 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -232,7 +229,6 @@
 	pwm7: pwm@10280030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280030 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -386,7 +382,6 @@
 	pwm0: pwm@20040000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040000 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -398,7 +393,6 @@
 	pwm1: pwm@20040010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040010 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -410,7 +404,6 @@
 	pwm2: pwm@20040020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040020 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -422,7 +415,6 @@
 	pwm3: pwm@20040030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040030 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts b/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts
new file mode 100644
index 000000000000..45dced8087a3
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1109.dtsi"
+#include "rv1126-sonoff-ihost.dtsi"
+
+/ {
+	model = "Sonoff iHost 2G";
+	compatible = "itead,sonoff-ihost", "rockchip,rv1109";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1109.dtsi b/arch/arm/boot/dts/rockchip/rv1109.dtsi
new file mode 100644
index 000000000000..9cbaa08ab1b8
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1109.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rv1126.dtsi"
+
+/ {
+	compatible = "rockchip,rv1109";
+
+	cpus {
+		/delete-node/ cpu@f02;
+		/delete-node/ cpu@f03;
+	};
+
+	arm-pmu {
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts
index f09be8405964..0c2396b8f8db 100644
--- a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts
+++ b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts
@@ -61,7 +61,7 @@
 	phy-mode = "rgmii";
 	phy-supply = <&vcc_3v3>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&rgmiim1_pins &clk_out_ethernetm1_pins>;
+	pinctrl-0 = <&rgmiim1_miim &rgmiim1_bus2 &rgmiim1_bus4 &clk_out_ethernetm1_pins>;
 	tx_delay = <0x2a>;
 	rx_delay = <0x1a>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi
index bb34b0c9cb4a..06b1d7f2d858 100644
--- a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi
+++ b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi
@@ -87,6 +87,16 @@
 				<0 RK_PB5 1 &pcfg_pull_none_drv_level_0_smt>;
 		};
 	};
+	i2c2 {
+		/omit-if-no-ref/
+		i2c2_xfer: i2c2-xfer {
+			rockchip,pins =
+				/* i2c2_scl */
+				<0 RK_PC2 1 &pcfg_pull_none_drv_level_0_smt>,
+				/* i2c2_sda */
+				<0 RK_PC3 1 &pcfg_pull_none_drv_level_0_smt>;
+		};
+	};
 	pwm2 {
 		/omit-if-no-ref/
 		pwm2m0_pins: pwm2m0-pins {
@@ -105,36 +115,56 @@
 	};
 	rgmii {
 		/omit-if-no-ref/
-		rgmiim1_pins: rgmiim1-pins {
+		rgmiim1_miim: rgmiim1-miim {
 			rockchip,pins =
 				/* rgmii_mdc_m1 */
 				<2 RK_PC2 2 &pcfg_pull_none>,
 				/* rgmii_mdio_m1 */
-				<2 RK_PC1 2 &pcfg_pull_none>,
-				/* rgmii_rxclk_m1 */
-				<2 RK_PD3 2 &pcfg_pull_none>,
+				<2 RK_PC1 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_rxer: rgmiim1-rxer {
+			rockchip,pins =
+				/* rgmii_rxer_m1 */
+				<2 RK_PC0 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_bus2: rgmiim1-bus2 {
+			rockchip,pins =
 				/* rgmii_rxd0_m1 */
 				<2 RK_PB5 2 &pcfg_pull_none>,
 				/* rgmii_rxd1_m1 */
 				<2 RK_PB6 2 &pcfg_pull_none>,
-				/* rgmii_rxd2_m1 */
-				<2 RK_PC7 2 &pcfg_pull_none>,
-				/* rgmii_rxd3_m1 */
-				<2 RK_PD0 2 &pcfg_pull_none>,
 				/* rgmii_rxdv_m1 */
 				<2 RK_PB4 2 &pcfg_pull_none>,
-				/* rgmii_txclk_m1 */
-				<2 RK_PD2 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd0_m1 */
 				<2 RK_PC3 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd1_m1 */
 				<2 RK_PC4 2 &pcfg_pull_none_drv_level_3>,
+				/* rgmii_txen_m1 */
+				<2 RK_PC6 2 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_bus4: rgmiim1-bus4 {
+			rockchip,pins =
+				/* rgmii_rxclk_m1 */
+				<2 RK_PD3 2 &pcfg_pull_none>,
+				/* rgmii_rxd2_m1 */
+				<2 RK_PC7 2 &pcfg_pull_none>,
+				/* rgmii_rxd3_m1 */
+				<2 RK_PD0 2 &pcfg_pull_none>,
+				/* rgmii_txclk_m1 */
+				<2 RK_PD2 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd2_m1 */
 				<2 RK_PD1 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd3_m1 */
-				<2 RK_PA4 2 &pcfg_pull_none_drv_level_3>,
-				/* rgmii_txen_m1 */
-				<2 RK_PC6 2 &pcfg_pull_none_drv_level_3>;
+				<2 RK_PA4 2 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_mclkinout: rgmiim1-mclkinout {
+			rockchip,pins =
+				/* rgmii_clk_m1 */
+				<2 RK_PB7 2 &pcfg_pull_none>;
 		};
 	};
 	sdmmc0 {
@@ -263,6 +293,14 @@
 				/* uart3_tx_m0 */
 				<3 RK_PC6 4 &pcfg_pull_up>;
 		};
+		/omit-if-no-ref/
+		uart3m2_xfer: uart3m2-xfer {
+			rockchip,pins =
+				/* uart3_rx_m2 */
+				<3 RK_PA1 4 &pcfg_pull_up>,
+				/* uart3_tx_m2 */
+				<3 RK_PA0 4 &pcfg_pull_up>;
+		};
 	};
 	uart4 {
 		/omit-if-no-ref/
@@ -273,6 +311,14 @@
 				/* uart4_tx_m0 */
 				<3 RK_PA4 4 &pcfg_pull_up>;
 		};
+		/omit-if-no-ref/
+		uart4m2_xfer: uart4m2-xfer {
+			rockchip,pins =
+				/* uart4_rx_m2 */
+				<1 RK_PD4 3 &pcfg_pull_up>,
+				/* uart4_tx_m2 */
+				<1 RK_PD5 3 &pcfg_pull_up>;
+		};
 	};
 	uart5 {
 		/omit-if-no-ref/
diff --git a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts
new file mode 100644
index 000000000000..77386a48d81e
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-sonoff-ihost.dtsi"
+
+/ {
+	model = "Sonoff iHost 4G";
+	compatible = "itead,sonoff-ihost", "rockchip,rv1126";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
new file mode 100644
index 000000000000..32b329e87a0c
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sdio_pwrseq: pwrseq-sdio {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_npu_vepu: DCDC_REG1 {
+				regulator-name = "vdd_npu_vepu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcc_0v8: LDO_REG1 {
+				regulator-name = "vcc_0v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG2 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd0v8_pmu: LDO_REG3 {
+				regulator-name = "vcc0v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <800000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_dovdd: LDO_REG5 {
+				regulator-name = "vcc_dovdd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_dvdd: LDO_REG6 {
+				regulator-name = "vcc_dvdd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_avdd: LDO_REG7 {
+				regulator-name = "vcc_avdd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: LDO_REG9 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_5v0: SWITCH_REG1 {
+				regulator-name = "vcc_5v0";
+			};
+
+			vcc_3v3: SWITCH_REG2 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&gmac {
+	assigned-clocks = <&cru CLK_GMAC_SRC_M1>, <&cru CLK_GMAC_SRC>,
+			  <&cru CLK_GMAC_TX_RX>;
+	assigned-clock-parents = <&cru CLK_GMAC_RGMII_M1>, <&cru CLK_GMAC_SRC_M1>,
+				 <&cru RMII_MODE_CLK>;
+	assigned-clock-rates = <0>, <50000000>;
+	clock_in_out = "output";
+	phy-handle = <&phy>;
+	phy-mode = "rmii";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_miim &rgmiim1_rxer &rgmiim1_bus2 &rgmiim1_mclkinout>;
+	status = "okay";
+};
+
+&mdio {
+	phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_rst>;
+		reset-active-low;
+		reset-assert-us = <50000>;
+		reset-deassert-us = <10000>;
+		reset-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		eth_phy_rst: eth-phy-rst {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+	bt {
+		bt_enable: bt-enable {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_dev: bt-wake-dev {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio0-supply = <&vcc1v8_pmu>;
+	pmuio1-supply = <&vcc3v3_sys>;
+	vccio1-supply = <&vcc_1v8>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_1v8>;
+	vccio4-supply = <&vcc_dovdd>;
+	vccio5-supply = <&vcc_1v8>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_dovdd>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <100000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723ds-bt";
+		device-wake-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; /* BT_WAKE */
+		enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; /* BT_RST */
+		host-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; /* BT_WAKE_HOST */
+		max-speed = <2000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3m2_xfer>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4m2_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1126.dtsi b/arch/arm/boot/dts/rockchip/rv1126.dtsi
index 9ccd1bad6229..bb603cae13df 100644
--- a/arch/arm/boot/dts/rockchip/rv1126.dtsi
+++ b/arch/arm/boot/dts/rockchip/rv1126.dtsi
@@ -21,6 +21,13 @@
 
 	aliases {
 		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
 	};
 
 	cpus {
@@ -231,6 +238,20 @@
 		status = "disabled";
 	};
 
+	i2c2: i2c@ff400000 {
+		compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
+		reg = <0xff400000 0x1000>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,grf = <&pmugrf>;
+		clocks = <&pmucru CLK_I2C2>, <&pmucru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	uart1: serial@ff410000 {
 		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
 		reg = <0xff410000 0x100>;
diff --git a/arch/arm/boot/dts/samsung/exynos4.dtsi b/arch/arm/boot/dts/samsung/exynos4.dtsi
index f775b9377a38..7f981b5c0d64 100644
--- a/arch/arm/boot/dts/samsung/exynos4.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4.dtsi
@@ -203,16 +203,16 @@
 
 		camera: camera@11800000 {
 			compatible = "samsung,fimc";
+			ranges = <0x0 0x11800000 0xa0000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#clock-cells = <1>;
 			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
 
-			fimc_0: fimc@11800000 {
+			fimc_0: fimc@0 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11800000 0x1000>;
+				reg = <0x0 0x1000>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC0>,
 					 <&clock CLK_SCLK_FIMC0>;
@@ -223,9 +223,9 @@
 				status = "disabled";
 			};
 
-			fimc_1: fimc@11810000 {
+			fimc_1: fimc@10000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11810000 0x1000>;
+				reg = <0x00010000 0x1000>;
 				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC1>,
 					 <&clock CLK_SCLK_FIMC1>;
@@ -236,9 +236,9 @@
 				status = "disabled";
 			};
 
-			fimc_2: fimc@11820000 {
+			fimc_2: fimc@20000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11820000 0x1000>;
+				reg = <0x00020000 0x1000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC2>,
 					 <&clock CLK_SCLK_FIMC2>;
@@ -249,9 +249,9 @@
 				status = "disabled";
 			};
 
-			fimc_3: fimc@11830000 {
+			fimc_3: fimc@30000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11830000 0x1000>;
+				reg = <0x00030000 0x1000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC3>,
 					 <&clock CLK_SCLK_FIMC3>;
@@ -262,9 +262,9 @@
 				status = "disabled";
 			};
 
-			csis_0: csis@11880000 {
+			csis_0: csis@80000 {
 				compatible = "samsung,exynos4210-csis";
-				reg = <0x11880000 0x4000>;
+				reg = <0x00080000 0x4000>;
 				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_CSIS0>,
 					 <&clock CLK_SCLK_CSIS0>;
@@ -278,9 +278,9 @@
 				#size-cells = <0>;
 			};
 
-			csis_1: csis@11890000 {
+			csis_1: csis@90000 {
 				compatible = "samsung,exynos4210-csis";
-				reg = <0x11890000 0x4000>;
+				reg = <0x00090000 0x4000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_CSIS1>,
 					 <&clock CLK_SCLK_CSIS1>;
diff --git a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
index a9ec1f6c1dea..0d8495792a70 100644
--- a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
@@ -184,6 +184,28 @@
 		};
 	};
 
+	i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpk1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpk1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+
+		touchscreen@20 {
+			compatible = "cypress,aries-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&gpl0>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+			vdd-supply = <&vtouchled_reg>;
+			vcc-supply = <&vtouch_reg>;
+			linux,keycodes = <KEY_MENU>, <KEY_BACK>;
+		};
+	};
+
 	spi-3 {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
@@ -380,6 +402,23 @@
 	vusb_a-supply = <&vusbdac_reg>;
 };
 
+&i2c_1 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	lis3dh: accelerometer@19 {
+		compatible = "st,lis3dh-accel";
+		reg = <0x19>;
+
+		mount-matrix = "0", "-1", "0",
+			       "1", "0", "0",
+			       "0", "0", "1";
+	};
+};
+
 &i2c_3 {
 	status = "okay";
 
@@ -513,7 +552,6 @@
 				regulator-name = "TOUCH_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
 			};
 
 			vpll_reg: LDO10 {
@@ -527,6 +565,14 @@
 				regulator-name = "VT_CAM_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+
+				/*
+				 * Force-enable this regulator; otherwise the
+				 * kernel hangs very early in the boot process
+				 * for about 12 seconds, without apparent
+				 * reason.
+				 */
+				regulator-always-on;
 			};
 
 			vcclcd_reg: LDO13 {
diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
index d7954ff466b4..e5254e32aa8f 100644
--- a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
@@ -434,6 +434,7 @@
 };
 
 &fimd {
+	samsung,invert-vclk;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/samsung/exynos4x12.dtsi b/arch/arm/boot/dts/samsung/exynos4x12.dtsi
index 84c1db221c98..b4b5e769145b 100644
--- a/arch/arm/boot/dts/samsung/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4x12.dtsi
@@ -451,14 +451,15 @@
 };
 
 &camera {
+	ranges = <0x0 0x11800000 0xba1000>;
 	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
 		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
 	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
 
 	/* fimc_[0-3] are configured outside, under phandles */
-	fimc_lite_0: fimc-lite@12390000 {
+	fimc_lite_0: fimc-lite@b90000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x12390000 0x1000>;
+		reg = <0x00b90000 0x1000>;
 		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
@@ -467,9 +468,9 @@
 		status = "disabled";
 	};
 
-	fimc_lite_1: fimc-lite@123a0000 {
+	fimc_lite_1: fimc-lite@ba0000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x123a0000 0x1000>;
+		reg = <0x00ba0000 0x1000>;
 		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
@@ -478,9 +479,9 @@
 		status = "disabled";
 	};
 
-	fimc_is: fimc-is@12000000 {
+	fimc_is: fimc-is@800000 {
 		compatible = "samsung,exynos4212-fimc-is";
-		reg = <0x12000000 0x260000>;
+		reg = <0x00800000 0x260000>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
@@ -516,18 +517,15 @@
 		iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
 			 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
 		iommu-names = "isp", "drc", "fd", "mcuctl";
+		samsung,pmu-syscon = <&pmu_system_controller>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		status = "disabled";
 
-		pmu@10020000 {
-			reg = <0x10020000 0x3000>;
-		};
-
-		i2c1_isp: i2c-isp@12140000 {
+		i2c1_isp: i2c-isp@940000 {
 			compatible = "samsung,exynos4212-i2c-isp";
-			reg = <0x12140000 0x100>;
+			reg = <0x00940000 0x100>;
 			clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
 			clock-names = "i2c_isp";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/samsung/s5pv210.dtsi b/arch/arm/boot/dts/samsung/s5pv210.dtsi
index f7de5b5f2f38..ed560c9a3aa1 100644
--- a/arch/arm/boot/dts/samsung/s5pv210.dtsi
+++ b/arch/arm/boot/dts/samsung/s5pv210.dtsi
@@ -549,17 +549,17 @@
 
 		camera: camera@fa600000 {
 			compatible = "samsung,fimc";
+			ranges = <0x0 0xfa600000 0xe01000>;
 			clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
 			clock-names = "sclk_cam0", "sclk_cam1";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#clock-cells = <1>;
 			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
 
-			csis0: csis@fa600000 {
+			csis0: csis@0 {
 				compatible = "samsung,s5pv210-csis";
-				reg = <0xfa600000 0x4000>;
+				reg = <0x00000000 0x4000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <29>;
 				clocks = <&clocks CLK_CSIS>,
@@ -572,9 +572,9 @@
 				#size-cells = <0>;
 			};
 
-			fimc0: fimc@fb200000 {
+			fimc0: fimc@c00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb200000 0x1000>;
+				reg = <0x00c00000 0x1000>;
 				interrupts = <5>;
 				interrupt-parent = <&vic2>;
 				clocks = <&clocks CLK_FIMC0>,
@@ -586,9 +586,9 @@
 				samsung,cam-if;
 			};
 
-			fimc1: fimc@fb300000 {
+			fimc1: fimc@d00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb300000 0x1000>;
+				reg = <0x00d00000 0x1000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <6>;
 				clocks = <&clocks CLK_FIMC1>,
@@ -602,9 +602,9 @@
 				samsung,lcd-wb;
 			};
 
-			fimc2: fimc@fb400000 {
+			fimc2: fimc@e00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb400000 0x1000>;
+				reg = <0x00e00000 0x1000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <7>;
 				clocks = <&clocks CLK_FIMC2>,
diff --git a/arch/arm/boot/dts/st/ste-dbx5x0.dtsi b/arch/arm/boot/dts/st/ste-dbx5x0.dtsi
index d5d88771ef97..0f87abeddc33 100644
--- a/arch/arm/boot/dts/st/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/st/ste-dbx5x0.dtsi
@@ -425,7 +425,7 @@
 		gpio0: gpio@8012e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8012e000 0x80>;
+			reg = <0x8012e000 0x80>;
 			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -440,7 +440,7 @@
 		gpio1: gpio@8012e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8012e080 0x80>;
+			reg = <0x8012e080 0x80>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -455,7 +455,7 @@
 		gpio2: gpio@8000e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e000 0x80>;
+			reg = <0x8000e000 0x80>;
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -470,7 +470,7 @@
 		gpio3: gpio@8000e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e080 0x80>;
+			reg = <0x8000e080 0x80>;
 			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -485,7 +485,7 @@
 		gpio4: gpio@8000e100 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e100 0x80>;
+			reg = <0x8000e100 0x80>;
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -500,7 +500,7 @@
 		gpio5: gpio@8000e180 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e180 0x80>;
+			reg = <0x8000e180 0x80>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -515,7 +515,7 @@
 		gpio6: gpio@8011e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8011e000 0x80>;
+			reg = <0x8011e000 0x80>;
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -530,7 +530,7 @@
 		gpio7: gpio@8011e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8011e080 0x80>;
+			reg = <0x8011e080 0x80>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -545,7 +545,7 @@
 		gpio8: gpio@a03fe000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0xa03fe000 0x80>;
+			reg = <0xa03fe000 0x80>;
 			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/st/ste-href-ab8500.dtsi b/arch/arm/boot/dts/st/ste-href-ab8500.dtsi
index e1de9d389a01..5eeb44c5e932 100644
--- a/arch/arm/boot/dts/st/ste-href-ab8500.dtsi
+++ b/arch/arm/boot/dts/st/ste-href-ab8500.dtsi
@@ -9,6 +9,54 @@
 	soc {
 		prcmu@80157000 {
 			ab8500 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				regulator {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+
 				gpio {
 					/* Hog a few default settings */
 					pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/ste-href-ab8505.dtsi b/arch/arm/boot/dts/st/ste-href-ab8505.dtsi
new file mode 100644
index 000000000000..268db68ccf87
--- /dev/null
+++ b/arch/arm/boot/dts/st/ste-href-ab8505.dtsi
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2023 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include "ste-ab8505.dtsi"
+
+/ {
+	soc {
+		prcmu@80157000 {
+			ab8505 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				regulator {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+
+				gpio {
+					/* Hog a few default settings */
+					pinctrl-names = "default";
+					pinctrl-0 = <&gpio2_default_mode>,
+						    <&gpio4_default_mode>,
+						    <&gpio10_default_mode>,
+						    <&gpio11_default_mode>,
+						    <&gpio12_default_mode>,
+						    <&gpio13_default_mode>,
+						    <&gpio16_default_mode>,
+						    <&gpio24_default_mode>,
+						    <&gpio25_default_mode>,
+						    <&gpio36_default_mode>,
+						    <&gpio37_default_mode>,
+						    <&gpio38_default_mode>,
+						    <&gpio39_default_mode>,
+						    <&gpio42_default_mode>,
+						    <&gpio26_default_mode>,
+						    <&gpio35_default_mode>,
+						    <&ycbcr_default_mode>,
+						    <&pwm_default_mode>,
+						    <&adi1_default_mode>,
+						    <&usbuicc_default_mode>,
+						    <&dmic_default_mode>,
+						    <&extcpena_default_mode>,
+						    <&modsclsda_default_mode>;
+
+					/*
+					 * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
+					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
+					 */
+					gpio2 {
+						gpio2_default_mode: gpio2_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio2_a_1";
+							};
+							default_cfg {
+								pins = "GPIO2_T9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio4 {
+						gpio4_default_mode: gpio4_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio4_a_1";
+							};
+							default_cfg {
+								pins = "GPIO4_W2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio10 {
+						gpio10_default_mode: gpio10_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio10_d_1";
+							};
+							default_cfg {
+								pins = "GPIO10_U17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio11 {
+						gpio11_default_mode: gpio11_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio11_d_1";
+							};
+							default_cfg {
+								pins = "GPIO11_AA18";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio12 {
+						gpio12_default_mode: gpio12_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio12_d_1";
+							};
+							default_cfg {
+								pins = "GPIO12_U16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio13 {
+						gpio13_default_mode: gpio13_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio13_d_1";
+							};
+							default_cfg {
+								pins = "GPIO13_W17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio16 {
+						gpio16_default_mode: gpio16_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio16_a_1";
+							};
+							default_cfg {
+								pins = "GPIO16_F15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio24 {
+						gpio24_default_mode: gpio24_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio24_a_1";
+							};
+							default_cfg {
+								pins = "GPIO24_T14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio25 {
+						gpio25_default_mode: gpio25_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio25_a_1";
+							};
+							default_cfg {
+								pins = "GPIO25_R16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio36 {
+						gpio36_default_mode: gpio36_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio36_a_1";
+							};
+							default_cfg {
+								pins = "GPIO36_A17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio37 {
+						gpio37_default_mode: gpio37_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio37_a_1";
+							};
+							default_cfg {
+								pins = "GPIO37_E15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio38 {
+						gpio38_default_mode: gpio38_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio38_a_1";
+							};
+							default_cfg {
+								pins = "GPIO38_C17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio39 {
+						gpio39_default_mode: gpio39_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio39_a_1";
+							};
+							default_cfg {
+								pins = "GPIO39_E16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio42 {
+						gpio42_default_mode: gpio42_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio42_a_1";
+							};
+							default_cfg {
+								pins = "GPIO42_U2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
+					 */
+					gpio26 {
+						gpio26_default_mode: gpio26_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio26_d_1";
+							};
+							default_cfg {
+								pins = "GPIO26_M16";
+								output-low;
+							};
+						};
+					};
+					gpio35 {
+						gpio35_default_mode: gpio35_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio35_d_1";
+							};
+							default_cfg {
+								pins = "GPIO35_W15";
+								output-low;
+							};
+						};
+					};
+					/*
+					 * This sets up the YCBCR connector pins, i.e. analog video out.
+					 * Set as input with no bias.
+					 */
+					ycbcr {
+						ycbcr_default_mode: ycbcr_default {
+							default_mux {
+								function = "ycbcr";
+								groups = "ycbcr0123_d_1";
+							};
+							default_cfg {
+								pins = "GPIO6_Y18",
+									 "GPIO7_AA20",
+									 "GPIO8_W18",
+									 "GPIO9_AA19";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					/* This sets up the PWM pins 14 and 15 */
+					pwm {
+						pwm_default_mode: pwm_default {
+							default_mux {
+								function = "pwmout";
+								groups = "pwmout1_d_1", "pwmout2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO14_F14",
+									 "GPIO15_B17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up audio interface 1 */
+					adi1 {
+						adi1_default_mode: adi1_default {
+							default_mux {
+								function = "adi1";
+								groups = "adi1_d_1";
+							};
+							default_cfg {
+								pins = "GPIO17_P5",
+									 "GPIO18_R5",
+									 "GPIO19_U5",
+									 "GPIO20_T5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the USB UICC pins */
+					usbuicc {
+						usbuicc_default_mode: usbuicc_default {
+							default_mux {
+								function = "usbuicc";
+								groups = "usbuicc_d_1";
+							};
+							default_cfg {
+								pins = "GPIO21_H19",
+									 "GPIO22_G20",
+									 "GPIO23_G19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the microphone pins */
+					dmic {
+						dmic_default_mode: dmic_default {
+							default_mux {
+								function = "dmic";
+								groups = "dmic12_d_1",
+									 "dmic34_d_1",
+									 "dmic56_d_1";
+							};
+							default_cfg {
+								pins = "GPIO27_J6",
+									 "GPIO28_K6",
+									 "GPIO29_G6",
+									 "GPIO30_H6",
+									 "GPIO31_F5",
+									 "GPIO32_G5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					extcpena {
+						extcpena_default_mode: extcpena_default {
+							default_mux {
+								function = "extcpena";
+								groups = "extcpena_d_1";
+							};
+							default_cfg {
+								pins = "GPIO34_R17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* Modem I2C setup (SCL and SDA pins) */
+					modsclsda {
+						modsclsda_default_mode: modsclsda_default {
+							default_mux {
+								function = "modsclsda";
+								groups = "modsclsda_d_1";
+							};
+							default_cfg {
+								pins = "GPIO40_T19",
+									"GPIO41_U19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Clock output pins associated with regulators.
+					 */
+					sysclkreq2 {
+						sysclkreq2_default_mode: sysclkreq2_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO1_T10";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq2_sleep_mode: sysclkreq2_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio1_a_1";
+							};
+							default_cfg {
+								pins = "GPIO1_T10";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					sysclkreq4 {
+						sysclkreq4_default_mode: sysclkreq4_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq4_d_1";
+							};
+							default_cfg {
+								pins = "GPIO3_U9";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq4_sleep_mode: sysclkreq4_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio3_a_1";
+							};
+							default_cfg {
+								pins = "GPIO3_U9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+				};
+				/*
+				 * Charging is not working on the HREF unless an actual battery is
+				 * mounted, most HREFs have a DC cable in to the "battery power"
+				 * which means this will only be cofusing. So do not enable charging
+				 * of the HREFs.
+				 */
+				ab8500_fg {
+					status = "disabled";
+				};
+				ab8500_btemp {
+					status = "disabled";
+				};
+				ab8500_charger {
+					status = "disabled";
+				};
+				ab8500_chargalg {
+					status = "disabled";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st/ste-href.dtsi b/arch/arm/boot/dts/st/ste-href.dtsi
index 13b11dbeba1c..fbf0309e108f 100644
--- a/arch/arm/boot/dts/st/ste-href.dtsi
+++ b/arch/arm/boot/dts/st/ste-href.dtsi
@@ -242,61 +242,6 @@
 			status = "okay";
 		};
 
-		prcmu@80157000 {
-			ab8500 {
-				gpio {
-				};
-
-				phy {
-					pinctrl-names = "default", "sleep";
-					pinctrl-0 = <&usb_a_1_default>;
-					pinctrl-1 = <&usb_a_1_sleep>;
-				};
-
-				regulator {
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-					};
-
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-					};
-
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-					};
-
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-
 		pinctrl {
 			sdi0 {
 				sdi0_default_mode: sdi0_default {
diff --git a/arch/arm/boot/dts/st/ste-href520-tvk.dts b/arch/arm/boot/dts/st/ste-href520-tvk.dts
index 7f661f8f13ad..5677df43c3ac 100644
--- a/arch/arm/boot/dts/st/ste-href520-tvk.dts
+++ b/arch/arm/boot/dts/st/ste-href520-tvk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8520.dtsi"
+#include "ste-href-ab8505.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-tvk1281618-r3.dtsi"
 
diff --git a/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts
index a29e345a43d3..b142bb2d38d8 100644
--- a/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts
+++ b/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefprev60.dtsi"
 #include "ste-href-stuib.dtsi"
 
diff --git a/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts
index 1968bd143114..5da1ff41b00e 100644
--- a/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts
+++ b/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefprev60.dtsi"
 #include "ste-href-tvk1281618-r2.dtsi"
 
diff --git a/arch/arm/boot/dts/st/ste-hrefprev60.dtsi b/arch/arm/boot/dts/st/ste-hrefprev60.dtsi
index 9859ee91a15e..c87fd27b4434 100644
--- a/arch/arm/boot/dts/st/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/st/ste-hrefprev60.dtsi
@@ -62,7 +62,7 @@
 
 		// External Micro SD slot
 		mmc@80126000 {
-			cd-gpios  = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
+			cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		pinctrl {
diff --git a/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts
index 7a5b6aa1db5b..c4abe24a7cd0 100644
--- a/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts
+++ b/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-stuib.dtsi"
 
diff --git a/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts
index d5af3f375161..f55e8de2b516 100644
--- a/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts
+++ b/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-tvk1281618-r2.dtsi"
 
diff --git a/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi
index e66fa59c2de6..b23966c16a32 100644
--- a/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi
@@ -3,7 +3,6 @@
  * Copyright 2012 ST-Ericsson AB
  */
 
-#include "ste-href-ab8500.dtsi"
 #include "ste-href.dtsi"
 
 / {
@@ -191,7 +190,7 @@
 
 		// External Micro SD slot
 		mmc@80126000 {
-			cd-gpios  = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
+			cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
 		};
 
 		pinctrl {
diff --git a/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi
index 6816eef39d45..4d37c5fb553c 100644
--- a/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi
@@ -52,7 +52,7 @@
 
 	gpio0: gpio@101e4000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e4000 0x80>;
+		reg = <0x101e4000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <6>;
 		interrupt-controller;
@@ -66,7 +66,7 @@
 
 	gpio1: gpio@101e5000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e5000 0x80>;
+		reg = <0x101e5000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <7>;
 		interrupt-controller;
@@ -80,7 +80,7 @@
 
 	gpio2: gpio@101e6000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e6000 0x80>;
+		reg = <0x101e6000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <8>;
 		interrupt-controller;
@@ -94,7 +94,7 @@
 
 	gpio3: gpio@101e7000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e7000 0x80>;
+		reg = <0x101e7000 0x80>;
 		ngpio = <28>;
 		interrupt-parent = <&vica>;
 		interrupts = <9>;
diff --git a/arch/arm/boot/dts/st/ste-snowball.dts b/arch/arm/boot/dts/st/ste-snowball.dts
index 27c2ec51e732..1322abfc7acf 100644
--- a/arch/arm/boot/dts/st/ste-snowball.dts
+++ b/arch/arm/boot/dts/st/ste-snowball.dts
@@ -266,7 +266,7 @@
 			pinctrl-1 = <&mc0_a_1_sleep>;
 
 			/* GPIO218 MMC_CD */
-			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
+			cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
 
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
index 463942ae755e..c623cc35c5ea 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
@@ -310,7 +310,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
index c1ae0e23fe45..2355ca6e9ad6 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
@@ -402,7 +402,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts
index b21e40da3dfd..ad9a20ccaaeb 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts
@@ -362,7 +362,7 @@
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
 			/* "flash detect" actually card detect */
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>;
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
index 6e586e875565..229f7c32103c 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
@@ -412,7 +412,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts
index ba4421080b2a..cdb147dcc1db 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts
@@ -238,7 +238,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_1_default>;
 			pinctrl-1 = <&mc0_a_1_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/st/stm32429i-eval.dts b/arch/arm/boot/dts/st/stm32429i-eval.dts
index 576235ec3c51..afa417b34b25 100644
--- a/arch/arm/boot/dts/st/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/st/stm32429i-eval.dts
@@ -222,7 +222,6 @@
 		reg = <0x42>;
 		interrupts = <8 3>;
 		interrupt-parent = <&gpioi>;
-		interrupt-controller;
 		wakeup-source;
 
 		stmpegpio: stmpe_gpio {
diff --git a/arch/arm/boot/dts/st/stm32f469-disco.dts b/arch/arm/boot/dts/st/stm32f469-disco.dts
index cbbd521bf010..8a4f8ddd083d 100644
--- a/arch/arm/boot/dts/st/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f469-disco.dts
@@ -69,16 +69,9 @@
 		serial0 = &usart3;
 	};
 
-	mmc_vcard: mmc_vcard {
+	vcc_3v3: vcc-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc_vcard";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vdd_dsi: vdd-dsi {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_dsi";
+		regulator-name = "vcc_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
@@ -164,7 +157,7 @@
 		compatible = "orisetech,otm8009a";
 		reg = <0>; /* dsi virtual channel (0..3) */
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_dsi>;
+		power-supply = <&vcc_3v3>;
 		status = "okay";
 
 		port {
@@ -219,7 +212,7 @@
 
 &sdio {
 	status = "okay";
-	vmmc-supply = <&mmc_vcard>;
+	vmmc-supply = <&vcc_3v3>;
 	cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
 	broken-cd;
 	pinctrl-names = "default", "opendrain";
diff --git a/arch/arm/boot/dts/st/stm32f746.dtsi b/arch/arm/boot/dts/st/stm32f746.dtsi
index 53a8e2dec9a4..65c72b6fcc83 100644
--- a/arch/arm/boot/dts/st/stm32f746.dtsi
+++ b/arch/arm/boot/dts/st/stm32f746.dtsi
@@ -274,6 +274,26 @@
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
 		};
 
+		spi2: spi@40003800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40003800 0x400>;
+			interrupts = <36>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI2)>;
+			status = "disabled";
+		};
+
+		spi3: spi@40003c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40003c00 0x400>;
+			interrupts = <51>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI3)>;
+			status = "disabled";
+		};
+
 		usart2: serial@40004400 {
 			compatible = "st,stm32f7-uart";
 			reg = <0x40004400 0x400>;
@@ -491,9 +511,30 @@
 			status = "disabled";
 		};
 
+		spi1: spi@40013000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40013000 0x400>;
+			interrupts = <35>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI1)>;
+			status = "disabled";
+		};
+
+		spi4: spi@40013400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40013400 0x400>;
+			interrupts = <84>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI4)>;
+			status = "disabled";
+		};
+
 		syscfg: syscon@40013800 {
 			compatible = "st,stm32-syscfg", "syscon";
 			reg = <0x40013800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SYSCFG)>;
 		};
 
 		exti: interrupt-controller@40013c00 {
@@ -554,6 +595,26 @@
 			};
 		};
 
+		spi5: spi@40015000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40015000 0x400>;
+			interrupts = <85>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI5)>;
+			status = "disabled";
+		};
+
+		spi6: spi@40015400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40015400 0x400>;
+			interrupts = <86>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI6)>;
+			status = "disabled";
+		};
+
 		ltdc: display-controller@40016800 {
 			compatible = "st,stm32-ltdc";
 			reg = <0x40016800 0x200>;
diff --git a/arch/arm/boot/dts/st/stm32mp135.dtsi b/arch/arm/boot/dts/st/stm32mp135.dtsi
index abf2acd37b4e..68d32f9f5314 100644
--- a/arch/arm/boot/dts/st/stm32mp135.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp135.dtsi
@@ -8,5 +8,16 @@
 
 / {
 	soc {
+		dcmipp: dcmipp@5a000000 {
+			compatible = "st,stm32mp13-dcmipp";
+			reg = <0x5a000000 0x400>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc DCMIPP_R>;
+			clocks = <&rcc DCMIPP_K>;
+			status = "disabled";
+
+			port {
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
index 61508917521c..fa4cbd312e5a 100644
--- a/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -1521,6 +1521,8 @@
 			clocks = <&usbphyc>, <&rcc USBH>;
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphyc_port0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -1531,6 +1533,8 @@
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			companion = <&usbh_ohci>;
+			phys = <&usbphyc_port0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
index dd23de85100c..3938d357e198 100644
--- a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
@@ -206,8 +206,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
index afcd6285890c..ce5937270aa1 100644
--- a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
-	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157";
+	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@de000000 {
@@ -59,7 +59,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git a/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi
index 5f85598cc7c6..5c1cc48e5199 100644
--- a/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi
@@ -313,8 +313,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
index 39358d902000..c20a73841c1f 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
-	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
+	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@de000000 {
@@ -65,7 +65,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
index 510cca5acb79..7a701f7ef0c7 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
@@ -64,7 +64,6 @@
 		reg = <0x38>;
 		interrupts = <2 2>;
 		interrupt-parent = <&gpiof>;
-		interrupt-controller;
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <800>;
 		status = "okay";
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
index 07ea765a4553..5e2eaf57ce22 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
-	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
+	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@fe000000 {
@@ -64,7 +64,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git a/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
index f928cfb80b87..4792004cab0c 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
@@ -500,14 +500,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
index 813086ec2489..3226fb945a8e 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
@@ -11,8 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
-	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1",
-		     "st,stm32mp157";
+	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
 
 	reserved-memory {
 		optee@fe000000 {
@@ -70,7 +69,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
index cd9c3ff5378b..9eb9a1bf4f2c 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
@@ -362,7 +362,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts
index bd67a1db9122..527c33be66cc 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts
@@ -197,14 +197,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
index 4e8b2d2b30c7..bf0c32027baf 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
@@ -547,14 +547,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
index f09b7c384bd9..fc3a2386dbb9 100644
--- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
@@ -567,9 +567,6 @@ baseboard_eeprom: &sip_eeprom {
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
-
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
index 35b1034aa3cf..bb4f8a0b937f 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
@@ -152,7 +152,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
index 46b87a27d8b3..466d9701add0 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
@@ -305,7 +305,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
index abc595350e71..b5bc53accd6b 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
@@ -119,12 +119,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
index 0069ad75d55e..343a4613dfca 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
@@ -489,8 +489,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi
index 92d906bfd5d7..bc4ddcbdd5cf 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi
@@ -312,12 +312,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi
index ab7f0ba49639..6e79c4b6fe32 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi
@@ -168,12 +168,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
index 511113f2e399..f7634c51efb2 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
@@ -680,7 +680,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi
index bff73a0ed10b..5c88a90903b8 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi
@@ -36,9 +36,9 @@ qmss: qmss@2a40000 {
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <528 16>;
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts
index 7bfc80f1af26..f0ddbbcdc972 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts
@@ -9,7 +9,7 @@
 #include "keystone-k2g.dtsi"
 
 / {
-	compatible =  "ti,k2g-evm", "ti,k2g", "ti,keystone";
+	compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone";
 	model = "Texas Instruments K2G General Purpose EVM";
 
 	memory@800000000 {
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi
index f6306933ff42..7109ca031617 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi
@@ -37,9 +37,9 @@ qmss: qmss@4020000 {
 		qpend {
 			qpend-0 {
 				qrange = <77 8>;
-				interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04
-					     0 311 0xf04 0 312 0xf04 0 313 0xf04
-					     0 314 0xf04 0 315 0xf04>;
+				interrupts = <0 308 0xf04 0 309 0xf04 0 310 0xf04
+					      0 311 0xf04 0 312 0xf04 0 313 0xf04
+					      0 314 0xf04 0 315 0xf04>;
 				qalloc-by-id;
 			};
 		};
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts
index 206df8a8d9dd..8dfb54295027 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts
@@ -10,7 +10,7 @@
 #include "keystone-k2hk.dtsi"
 
 / {
-	compatible =  "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
+	compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
 	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
 
 	reserved-memory {
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi
index 8a421c65f920..c2ee775eab6a 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi
@@ -49,9 +49,9 @@ qmss: qmss@2a40000 {
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <8704 16>;
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi
index 5ec6680a533d..1afebd7458c1 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi
@@ -36,9 +36,9 @@ qmss: qmss@2a40000 {
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <528 16>;
diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
index d2b590004fed..95c68135dd0c 100644
--- a/arch/arm/boot/dts/ti/omap/Makefile
+++ b/arch/arm/boot/dts/ti/omap/Makefile
@@ -79,7 +79,9 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
 	omap4-sdp.dtb \
 	omap4-sdp-es23plus.dtb \
 	omap4-var-dvk-om44.dtb \
-	omap4-var-stk-om44.dtb
+	omap4-var-stk-om44.dtb \
+	omap4-xyboard-mz609.dtb \
+	omap4-xyboard-mz617.dtb
 dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-baltos-ir2110.dtb \
 	am335x-baltos-ir3220.dtb \
@@ -129,6 +131,16 @@ dtb-$(CONFIG_SOC_AM43XX) += \
 am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo
 am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo
 
+am571x-idk-overlays-dtbs := am571x-idk.dtb \
+	am571x-idk-touchscreen.dtbo am57xx-idk-lcd-osd101t2587.dtbo
+am572x-idk-overlays-dtbs := am572x-idk.dtb \
+	am572x-idk-touchscreen.dtbo am57xx-idk-lcd-osd101t2045.dtbo
+
+# Build time test only, enabled by CONFIG_OF_ALL_DTBS
+dtb- += \
+	am571x-idk-overlays.dtb \
+	am572x-idk-overlays.dtb
+
 dtb-$(CONFIG_SOC_DRA7XX) += \
 	am57xx-beagle-x15.dtb \
 	am57xx-beagle-x15-revb1.dtb \
diff --git a/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
index b8730aa52ce6..a59331aa58e5 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
@@ -217,7 +217,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_pins>;
 
-	tpm_spi_tis@0 {
+	tpm@0 {
 		compatible = "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <500000>;
diff --git a/arch/arm/boot/dts/ti/omap/am571x-idk.dts b/arch/arm/boot/dts/ti/omap/am571x-idk.dts
index 48425020281a..322cf79d22e9 100644
--- a/arch/arm/boot/dts/ti/omap/am571x-idk.dts
+++ b/arch/arm/boot/dts/ti/omap/am571x-idk.dts
@@ -168,8 +168,8 @@
 };
 
 &extcon_usb2 {
-	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+	id-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
 };
 
 &sn65hvs882 {
diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
index 9a234dc1431d..3e834fc7e370 100644
--- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
@@ -197,7 +197,7 @@
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
 		ti,enable-id-detection;
-		id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -415,7 +415,6 @@
 		reg = <0x41>;
 		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio2>;
-		interrupt-controller;
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;
diff --git a/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi b/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi
index 1d66278c3a72..3fca84819dc0 100644
--- a/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi
@@ -169,8 +169,8 @@
 };
 
 &extcon_usb2 {
-	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+	id-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
 };
 
 &sn65hvs882 {
diff --git a/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi b/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi
index 4cdffd6db740..ed5199d7acd8 100644
--- a/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi
@@ -15,12 +15,12 @@
 
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb2: extcon_usb2 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
 	};
 
 	sound0: sound0 {
diff --git a/arch/arm/boot/dts/ti/omap/dra71-evm.dts b/arch/arm/boot/dts/ti/omap/dra71-evm.dts
index a64364443031..f747ac56eb92 100644
--- a/arch/arm/boot/dts/ti/omap/dra71-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dra71-evm.dts
@@ -293,11 +293,11 @@
 };
 
 &extcon_usb1 {
-	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
 };
 
 &extcon_usb2 {
-	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
 };
 
 &ipu2 {
diff --git a/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi b/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi
index 31ab0c60ca75..f8151c61488e 100644
--- a/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi
@@ -96,12 +96,12 @@
 
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb2: extcon_usb2 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
 	};
 
 	hdmi0: connector {
diff --git a/arch/arm/boot/dts/ti/omap/dra76-evm.dts b/arch/arm/boot/dts/ti/omap/dra76-evm.dts
index 57868ac60d29..cf9c3d35b049 100644
--- a/arch/arm/boot/dts/ti/omap/dra76-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dra76-evm.dts
@@ -533,11 +533,11 @@
 };
 
 &extcon_usb1 {
-	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
 };
 
 &extcon_usb2 {
-	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
 };
 
 &m_can0 {
diff --git a/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts
index 533ce7ce387a..fbff15a0a0fe 100644
--- a/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts
@@ -52,7 +52,7 @@
 
 &uart2 {
 	/delete-property/dma-names;
-	bluetooth {
+	bluetooth-gnss {
 		compatible = "ti,wl1283-st";
 		enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */
 		max-speed = <3000000>;
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
index a2bb3609c94f..a0c53d9c2625 100644
--- a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
@@ -6,15 +6,6 @@
 #include "motorola-cpcap-mapphone.dtsi"
 
 / {
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &hdmi0;
-	};
-
 	/*
 	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
 	 * then 1023 - 1024 seems to contain mbm.
@@ -63,46 +54,6 @@
 		regulator-always-on;
 	};
 
-	/* FS USB Host PHY on port 1 for mdm6600 */
-	fsusb1_phy: usb-phy@1 {
-		compatible = "motorola,mapphone-mdm6600";
-		pinctrl-0 = <&usb_mdm6600_pins>;
-		pinctrl-1 = <&usb_mdm6600_sleep_pins>;
-		pinctrl-names = "default", "sleep";
-		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
-		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
-		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
-		/* mode: gpio_148 gpio_149 */
-		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
-				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
-		/* cmd: gpio_103 gpio_104 gpio_142 */
-		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
-				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
-				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
-		/* status: gpio_52 gpio_53 gpio_55 */
-		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
-					<&gpio2 21 GPIO_ACTIVE_HIGH>,
-					<&gpio2 23 GPIO_ACTIVE_HIGH>;
-		#phy-cells = <0>;
-	};
-
-	/* HS USB host TLL nop-phy on port 2 for w3glte */
-	hsusb2_phy: usb-phy@2 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-
-	/* LCD regulator from sw5 source */
-	lcd_regulator: regulator-lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd";
-		regulator-min-microvolt = <5050000>;
-		regulator-max-microvolt = <5050000>;
-		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
-		enable-active-high;
-		vin-supply = <&sw5>;
-	};
-
 	/* This is probably coming straight from the battery.. */
 	wl12xx_vmmc: regulator-wl12xx {
 		compatible = "regulator-fixed";
@@ -133,41 +84,6 @@
 
 		dais = <&mcbsp2_port>, <&mcbsp3_port>;
 	};
-
-	pwm8: pwm-8 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_direction_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer8>;
-		ti,clock-source = <0x01>;
-	};
-
-	pwm9: pwm-9 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_enable_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x01>;
-	};
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
-		pwm-names = "enable", "direction";
-		direction-duty-cycle-ns = <10000000>;
-	};
-
-	backlight: backlight {
-		compatible = "led-backlight";
-
-		leds = <&backlight_led>;
-		brightness-levels = <31 63 95 127 159 191 223 255>;
-		default-brightness-level = <6>;
-	};
 };
 
 &cpu_thermal {
@@ -197,57 +113,6 @@
 	status = "okay";
 };
 
-&dsi1 {
-	status = "okay";
-	vdd-supply = <&vcsi>;
-
-	port {
-		dsi1_out_ep: endpoint {
-			remote-endpoint = <&lcd0_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd0: panel@0 {
-		compatible = "motorola,droid4-panel", "panel-dsi-cm";
-		reg = <0>;
-		label = "lcd0";
-		vddi-supply = <&lcd_regulator>;
-		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
-
-		backlight = <&backlight>;
-
-		width-mm = <50>;
-		height-mm = <89>;
-		rotation = <90>;
-
-		panel-timing {
-			clock-frequency = <0>;		/* Calculated by dsi */
-
-			hback-porch = <2>;
-			hactive = <540>;
-			hfront-porch = <0>;
-			hsync-len = <2>;
-
-			vback-porch = <1>;
-			vactive = <960>;
-			vfront-porch = <0>;
-			vsync-len = <1>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd0_in: endpoint {
-				remote-endpoint = <&dsi1_out_ep>;
-			};
-		};
-	};
-};
-
 &hdmi {
 	status = "okay";
 	pinctrl-0 = <&dss_hdmi_pins>;
@@ -262,13 +127,6 @@
 	};
 };
 
-/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
-&hdqw1w {
-	pinctrl-0 = <&hdq_pins>;
-	pinctrl-names = "default";
-	ti,mode = "1w";
-};
-
 &i2c1 {
 	tmp105@48 {
 		compatible = "ti,tmp105";
@@ -322,34 +180,6 @@
 	};
 };
 
-&i2c2 {
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchscreen_pins>;
-
-		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
-
-		/* gpio_183 with sys_nirq2 pad as wakeup */
-		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
-				      <&omap4_pmx_core 0x160>;
-		interrupt-names = "irq", "wakeup";
-		wakeup-source;
-	};
-
-	isl29030@44 {
-		compatible = "isil,isl29030";
-		reg = <0x44>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&als_proximity_pins>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
-	};
-};
-
 &omap4_pmx_core {
 
 	/* hdmi_hpd.gpio_63 */
@@ -359,13 +189,6 @@
 		>;
 	};
 
-	hdq_pins: hdq-pins {
-		pinctrl-single,pins = <
-		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
-		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
-		>;
-	};
-
 	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
 	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
@@ -427,73 +250,6 @@
 		>;
 	};
 
-	touchscreen_pins: touchscreen-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	als_proximity_pins: als-proximity-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	usb_mdm6600_pins: usb-mdm6600-pins {
-		pinctrl-single,pins = <
-		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
-		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
-
-		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
-		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
-
-		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
-		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
-
-		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
-		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
-
-		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
-		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
-
-		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
-		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
-
-		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
-		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
-
-		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
-		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
-
-		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
-		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
-
-		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
-		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
-
-		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
-		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
-		>;
-	};
-
-	/* Modem sleep pins to keep gpio_49 high with internal pull */
-	usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
-		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
-		>;
-	};
-
 	usb_ulpi_pins: usb-ulpi-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x196, MUX_MODE7)
@@ -601,18 +357,6 @@
 		OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_fsx */
 		>;
 	};
-
-	vibrator_direction_pin: vibrator-direction-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
-		>;
-	};
-
-	vibrator_enable_pin: vibrator-enable-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
-		>;
-	};
 };
 
 &omap4_pmx_wkup {
@@ -629,17 +373,6 @@
 	status = "disabled";
 };
 
-/* Configure pwm clock source for timers 8 & 9 */
-&timer8 {
-	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_32k_ck>;
-};
-
-&timer9 {
-	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_32k_ck>;
-};
-
 /*
  * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
  * for wake-up events for both the USB PHY and the UART. We can use gpio_149
@@ -672,20 +405,6 @@
 	};
 };
 
-&usbhsohci {
-	phys = <&fsusb1_phy>;
-	phy-names = "usb";
-};
-
-&usbhsehci {
-	phys = <&hsusb2_phy>;
-};
-
-&usbhshost {
-	port1-mode = "ohci-phy-4pin-dpdm";
-	port2-mode = "ehci-tll";
-};
-
 /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
 &usb_otg_hs {
 	interface-type = <1>;
@@ -698,23 +417,6 @@
 	power = <150>;
 };
 
-&i2c4 {
-	ak8975: magnetometer@c {
-		compatible = "asahi-kasei,ak8975";
-		reg = <0x0c>;
-
-		vdd-supply = <&vhvio>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
-
-		rotation-matrix = "-1", "0", "0",
-				  "0", "1", "0",
-				  "0", "0", "-1";
-
-	};
-};
-
 &mcbsp2 {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi
new file mode 100644
index 000000000000..f3f9ff02b35f
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+/ {
+	/* FS USB Host PHY on port 1 for mdm6600 */
+	fsusb1_phy: usb-phy@1 {
+		compatible = "motorola,mapphone-mdm6600";
+		pinctrl-0 = <&usb_mdm6600_pins>;
+		pinctrl-1 = <&usb_mdm6600_sleep_pins>;
+		pinctrl-names = "default", "sleep";
+		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
+		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
+		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
+		/* mode: gpio_148 gpio_149 */
+		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
+		/* cmd: gpio_103 gpio_104 gpio_142 */
+		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
+				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
+		/* status: gpio_52 gpio_53 gpio_55 */
+		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+					<&gpio2 21 GPIO_ACTIVE_HIGH>,
+					<&gpio2 23 GPIO_ACTIVE_HIGH>;
+		#phy-cells = <0>;
+	};
+
+	/* HS USB host TLL nop-phy on port 2 for w3glte */
+	hsusb2_phy: usb-phy@2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	pwm8: pwm-8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_direction_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer8>;
+		ti,clock-source = <0x01>;
+	};
+
+	pwm9: pwm-9 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_enable_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer9>;
+		ti,clock-source = <0x01>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+		pwm-names = "enable", "direction";
+		direction-duty-cycle-ns = <10000000>;
+	};
+};
+
+/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
+&hdqw1w {
+	pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	ti,mode = "1w";
+};
+
+&i2c2 {
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
+
+		/* gpio_183 with sys_nirq2 pad as wakeup */
+		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
+				      <&omap4_pmx_core 0x160>;
+		interrupt-names = "irq", "wakeup";
+		wakeup-source;
+	};
+
+	isl29030@44 {
+		compatible = "isil,isl29030";
+		reg = <0x44>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&als_proximity_pins>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
+	};
+};
+
+&omap4_pmx_core {
+	hdq_pins: hdq-pins {
+		pinctrl-single,pins = <
+		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
+		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
+	/* kpd_row0.gpio_178 */
+	tmp105_irq: tmp105-irq-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	touchscreen_pins: touchscreen-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	usb_mdm6600_pins: usb-mdm6600-pins {
+		pinctrl-single,pins = <
+		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
+		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+
+		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
+		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+
+		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
+		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
+
+		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
+		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+
+		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
+		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+
+		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
+		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+
+		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
+		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+
+		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
+		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+
+		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
+		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+
+		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
+		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+
+		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
+		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	/* Modem sleep pins to keep gpio_49 high with internal pull */
+	usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
+		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	als_proximity_pins: als-proximity-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	vibrator_direction_pin: vibrator-direction-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
+		>;
+	};
+
+	vibrator_enable_pin: vibrator-enable-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
+		>;
+	};
+};
+
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&timer9 {
+	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&usbhsohci {
+	phys = <&fsusb1_phy>;
+	phy-names = "usb";
+};
+
+&usbhsehci {
+	phys = <&hsusb2_phy>;
+};
+
+&usbhshost {
+	port1-mode = "ohci-phy-4pin-dpdm";
+	port2-mode = "ehci-tll";
+};
+
+&i2c4 {
+	ak8975: magnetometer@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+
+		vdd-supply = <&vhvio>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
+
+		rotation-matrix = "-1", "0", "0",
+				  "0", "1", "0",
+				  "0", "0", "-1";
+
+	};
+};
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi
new file mode 100644
index 000000000000..a356b3a2f24e
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <MATRIX_KEY(5, 0, KEY_VOLUMEUP)>,
+		       <MATRIX_KEY(3, 0, KEY_VOLUMEDOWN)>;
+};
+
+/*
+ * On tablets, mmc1 regulator is vsimcard instead of vwlan2 in the stock kernel
+ * dtb. The regulator may not be wired even if a MMC cage is added though.
+ */
+&mmc1 {
+	vmmc-supply = <&vsimcard>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* gpio_176 */
+};
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi
new file mode 100644
index 000000000000..8b8de92b5424
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-handset.dtsi"
+
+/ {
+	backlight: backlight {
+		compatible = "led-backlight";
+
+		leds = <&backlight_led>;
+		brightness-levels = <31 63 95 127 159 191 223 255>;
+		default-brightness-level = <6>;
+	};
+
+	/* LCD regulator from sw5 source */
+	lcd_regulator: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd";
+		regulator-min-microvolt = <5050000>;
+		regulator-max-microvolt = <5050000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
+		enable-active-high;
+		vin-supply = <&sw5>;
+	};
+};
+
+&dsi1 {
+	status = "okay";
+	vdd-supply = <&vcsi>;
+
+	port {
+		dsi1_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd0: panel@0 {
+		compatible = "motorola,droid4-panel", "panel-dsi-cm";
+		reg = <0>;
+		label = "lcd0";
+		vddi-supply = <&lcd_regulator>;
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
+		backlight = <&backlight>;
+
+		width-mm = <50>;
+		height-mm = <89>;
+		rotation = <90>;
+
+		panel-timing {
+			clock-frequency = <0>;		/* Calculated by dsi */
+
+			hback-porch = <2>;
+			hactive = <540>;
+			hfront-porch = <0>;
+			hsync-len = <2>;
+
+			vback-porch = <1>;
+			vactive = <960>;
+			vfront-porch = <0>;
+			vsync-len = <1>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi1_out_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts
index ccf03a743678..1d9000f84f1b 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts
@@ -1,11 +1,20 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
 
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
 
 / {
 	model = "Motorola Droid Bionic XT875";
 	compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
 };
 
 &keypad {
diff --git a/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts b/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts
index e833c21f1c01..cc3f3e1b65ea 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts
@@ -1,9 +1,21 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
 
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
 
 / {
+	model = "Motorola Droid 4 XT894";
+	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 
@@ -33,11 +45,6 @@
 	};
 };
 
-/ {
-	model = "Motorola Droid 4 XT894";
-	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
-};
-
 &keypad {
 	keypad,num-rows = <8>;
 	keypad,num-columns = <8>;
diff --git a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
index 01d783826d5f..24f7d0285f79 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
@@ -51,6 +51,12 @@
 		regulator-name = "unknown";
 	};
 
+	wl12xx_pwrseq: wl12xx-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&twl 1>;
+		clock-names = "ext_clock";
+	};
+
        /* regulator for wl12xx on sdio2 */
 	wl12xx_vmmc: wl12xx-vmmc {
 		pinctrl-names = "default";
@@ -74,6 +80,7 @@
 	twl: pmic@48 {
 		compatible = "ti,twl6032";
 		reg = <0x48>;
+		#clock-cells = <1>;
 		/* IRQ# = 7 */
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
 		interrupt-controller;
@@ -294,6 +301,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&wl12xx_pins>;
 	vmmc-supply = <&wl12xx_vmmc>;
+	mmc-pwrseq = <&wl12xx_pwrseq>;
 	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core 0x12e>;
 	non-removable;
@@ -454,10 +462,12 @@
 	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core OMAP4_UART2_RX>;
 
-	/*
-	 * BT + GPS in WL1283 in WG7500 requiring CLK32KAUDIO of pmic
-	 * which does not have a driver
-	 */
+	bluetooth-gnss {
+		compatible = "ti,wl1283-st";
+		enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;	/* GPIO_25 */
+		clocks = <&twl 1>;
+		clock-names = "ext_clock";
+	};
 };
 
 &uart3 {
diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts
new file mode 100644
index 000000000000..762934e2d075
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+	model = "Motorola Xyboard MZ609";
+	compatible = "motorola,xyboard-mz609", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display1 = &hdmi0;
+	};
+
+	backlight: backlight {
+		compatible = "led-backlight";
+
+		leds = <&backlight_led>;
+		brightness-levels = <31 63 95 127 159 191 223 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&i2c1 {
+	led-controller@38 {
+		compatible = "ti,lm3532";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x38>;
+
+		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+		ramp-up-us = <1024>;
+		ramp-down-us = <8193>;
+
+		backlight_led: led@0 {
+			reg = <0>;
+			led-sources = <2>;
+			ti,led-mode = <0>;
+			label = ":backlight";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts
new file mode 100644
index 000000000000..b9caea3b7f9d
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+	model = "Motorola Xyboard MZ617";
+	compatible = "motorola,xyboard-mz617", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display1 = &hdmi0;
+	};
+};
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 70480dd9e96d..6d0c9f7268ba 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -68,6 +68,8 @@ struct locomo {
 #endif
 };
 
+static const struct bus_type locomo_bus_type;
+
 struct locomo_dev_info {
 	unsigned long	offset;
 	unsigned long	length;
@@ -842,7 +844,7 @@ static void locomo_bus_remove(struct device *dev)
 		drv->remove(ldev);
 }
 
-struct bus_type locomo_bus_type = {
+static const struct bus_type locomo_bus_type = {
 	.name		= "locomo-bus",
 	.match		= locomo_match,
 	.probe		= locomo_bus_probe,
diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig
index a25834e4c901..134a559aba3d 100644
--- a/arch/arm/configs/am200epdkit_defconfig
+++ b/arch/arm/configs/am200epdkit_defconfig
@@ -1,6 +1,5 @@
 CONFIG_LOCALVERSION="gum"
 CONFIG_SYSVIPC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_PREEMPT=y
 CONFIG_EXPERT=y
 # CONFIG_EPOLL is not set
@@ -49,7 +48,6 @@ CONFIG_BLK_DEV_SD=m
 CONFIG_ATA=m
 CONFIG_PATA_PCMCIA=m
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=m
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig
index 9d1b297c432e..b3dc0465796f 100644
--- a/arch/arm/configs/aspeed_g4_defconfig
+++ b/arch/arm/configs/aspeed_g4_defconfig
@@ -12,11 +12,12 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZO is not set
 # CONFIG_RD_LZ4 is not set
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSFS_SYSCALL is not set
 # CONFIG_AIO is not set
-CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_ASPEED=y
 CONFIG_MACH_ASPEED_G4=y
@@ -24,7 +25,6 @@ CONFIG_VMSPLIT_2G=y
 CONFIG_AEABI=y
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
-CONFIG_KEXEC=y
 CONFIG_JUMP_LABEL=y
 CONFIG_STRICT_KERNEL_RWX=y
 # CONFIG_BLK_DEBUG_FS is not set
diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig
index b55f8f539c5f..3fdf4dbfdea5 100644
--- a/arch/arm/configs/aspeed_g5_defconfig
+++ b/arch/arm/configs/aspeed_g5_defconfig
@@ -12,11 +12,12 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZO is not set
 # CONFIG_RD_LZ4 is not set
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSFS_SYSCALL is not set
 # CONFIG_AIO is not set
-CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_ASPEED=y
 CONFIG_MACH_ASPEED_G5=y
@@ -29,7 +30,6 @@ CONFIG_NR_CPUS=2
 CONFIG_HIGHMEM=y
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
-CONFIG_KEXEC=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig
index 8ba8eb7a4adf..07ab9eaac4af 100644
--- a/arch/arm/configs/assabet_defconfig
+++ b/arch/arm/configs/assabet_defconfig
@@ -28,7 +28,6 @@ CONFIG_MTD_SA1100=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_PCNET=y
 CONFIG_INPUT_EVDEV=y
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 71b5acc78187..1d53aec4c836 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -6,8 +6,9 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
@@ -22,7 +23,6 @@ CONFIG_UACCESS_WITH_MEMCPY=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
-CONFIG_KEXEC=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 225a16c0323c..b5f0bd8dd536 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -18,17 +18,17 @@ CONFIG_SCHED_AUTOGROUP=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
 CONFIG_CC_STACKPROTECTOR_REGULAR=y
+CONFIG_CRASH_DUMP=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM2835=y
 CONFIG_AEABI=y
 CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
-CONFIG_CRASH_DUMP=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig
index d7ed1e7c6a90..6fa3477e6b02 100644
--- a/arch/arm/configs/clps711x_defconfig
+++ b/arch/arm/configs/clps711x_defconfig
@@ -6,15 +6,8 @@ CONFIG_RD_LZMA=y
 CONFIG_EXPERT=y
 CONFIG_JUMP_LABEL=y
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_ARCH_CLPS711X=y
-CONFIG_ARCH_AUTCPU12=y
-CONFIG_ARCH_CDB89712=y
-CONFIG_ARCH_CLEP7312=y
-CONFIG_ARCH_EDB7211=y
-CONFIG_ARCH_P720T=y
 CONFIG_AEABI=y
 # CONFIG_COREDUMP is not set
-CONFIG_SLUB=y
 CONFIG_SLUB_TINY=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 69341c33e0cc..01b5a5a73f03 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -13,7 +13,6 @@ CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1"
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
 # CONFIG_SWAP is not set
-CONFIG_SLUB=y
 CONFIG_SLUB_TINY=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -60,9 +59,9 @@ CONFIG_MCP_SA11X0=y
 CONFIG_MCP_UCB1200=y
 CONFIG_MCP_UCB1200_TS=y
 CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_SA1100=y
 # CONFIG_VGA_CONSOLE is not set
+CONFIG_FB_MODE_HELPERS=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_NEW_LEDS=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 05ea71778ef8..3474e475373a 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -148,8 +148,8 @@ CONFIG_DRM_SIMPLE_BRIDGE=m
 CONFIG_DRM_TINYDRM=m
 CONFIG_TINYDRM_ST7586=m
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_DA8XX=y
+CONFIG_FIRMWARE_EDID=y
 CONFIG_BACKLIGHT_PWM=m
 CONFIG_BACKLIGHT_GPIO=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index 46859e6fee5b..2849d17f5856 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -6,9 +6,7 @@ CONFIG_EXPERT=y
 # CONFIG_ARCH_MULTI_V6 is not set
 CONFIG_ARCH_MULTI_V7=y
 CONFIG_ARCH_DOVE=y
-CONFIG_MACH_DOVE_DB=y
 CONFIG_MACH_CM_A510=y
-CONFIG_MACH_DOVE_DT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_ARM_APPENDED_DTB=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 44e89a980d29..7dece9d98828 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -78,8 +78,8 @@ CONFIG_SPI_EP93XX=y
 CONFIG_WATCHDOG=y
 CONFIG_EP93XX_WATCHDOG=y
 CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_EP93XX=y
+CONFIG_FB_MODE_HELPERS=y
 CONFIG_LOGO=y
 CONFIG_USB=y
 CONFIG_USB_DYNAMIC_MINORS=y
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index c9f4594b7ca9..5f6963687ee4 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -55,7 +55,6 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 CONFIG_NET_PCI=y
diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig
index 592a6e6024d4..7b1daec630cb 100644
--- a/arch/arm/configs/gemini_defconfig
+++ b/arch/arm/configs/gemini_defconfig
@@ -7,13 +7,13 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_USER_NS=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_GEMINI=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_CMDLINE="console=ttyS0,115200n8"
-CONFIG_KEXEC=y
 CONFIG_PM=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index ec45e6225225..875c8cdbada7 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -12,11 +12,6 @@ CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_MX21ADS=y
-CONFIG_MACH_MX27ADS=y
-CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_IMX27_VISSTRIM_M10=y
-CONFIG_MACH_PCA100=y
 CONFIG_SOC_IMX1=y
 CONFIG_SOC_IMX25=y
 CONFIG_SOC_IMX27=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 0a90583f9f01..8f9dbe8d9029 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -297,6 +297,7 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
 CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_GPIO=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index 91bdcc095884..e6ec768f42e2 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,6 +1,5 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
@@ -26,7 +25,6 @@ CONFIG_ATA=y
 CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCMCIA=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index 42053e45f730..98e267213b21 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -5,8 +5,6 @@ CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EXPERT=y
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
index 3d1d6f3b592a..f6f9e135353e 100644
--- a/arch/arm/configs/mmp2_defconfig
+++ b/arch/arm/configs/mmp2_defconfig
@@ -2,7 +2,6 @@ CONFIG_SYSVIPC=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MMP=y
 CONFIG_AEABI=y
@@ -28,7 +27,6 @@ CONFIG_MTD_ONENAND_GENERIC=y
 CONFIG_MTD_RAW_NAND=y
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig
index bb6a5222e42f..1d41e73f4903 100644
--- a/arch/arm/configs/moxart_defconfig
+++ b/arch/arm/configs/moxart_defconfig
@@ -4,13 +4,13 @@ CONFIG_NO_HZ_IDLE=y
 CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_EXPERT=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-CONFIG_EXPERT=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
@@ -126,8 +126,8 @@ CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_KGDB=y
 CONFIG_DEBUG_PAGEALLOC=y
 # CONFIG_SLUB_DEBUG is not set
-CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_SHIRQ=y
diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig
index a7fabf1d88ff..27d650635d9b 100644
--- a/arch/arm/configs/multi_v4t_defconfig
+++ b/arch/arm/configs/multi_v4t_defconfig
@@ -5,12 +5,12 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_ARCH_MULTI_V4T=y
 # CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_NSPIRE=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91RM9200=y
 CONFIG_ARCH_CLPS711X=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX1=y
-CONFIG_ARCH_NSPIRE=y
 CONFIG_ARCH_INTEGRATOR=y
 CONFIG_ARCH_INTEGRATOR_AP=y
 CONFIG_INTEGRATOR_IMPD1=y
@@ -25,7 +25,6 @@ CONFIG_ARM_CLPS711X_CPUIDLE=y
 CONFIG_JUMP_LABEL=y
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_COREDUMP is not set
-CONFIG_SLUB=y
 CONFIG_SLUB_TINY=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index 52bb1a5e25fc..3f4ddcf49ec7 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -62,8 +62,8 @@ CONFIG_NET_DSA=y
 CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
-CONFIG_PCI_MVEBU=y
 CONFIG_PCI_VERSATILE=y
+CONFIG_PCI_MVEBU=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_IMX_WEIM=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 10fd74bf85f9..ecb3e286107a 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -5,8 +5,11 @@ CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_VIRT=y
 CONFIG_ARCH_AIROHA=y
+CONFIG_ARCH_SUNPLUS=y
+CONFIG_ARCH_UNIPHIER=y
 CONFIG_ARCH_ACTIONS=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_ARTPEC=y
@@ -96,10 +99,8 @@ CONFIG_MACH_SPEAR1310=y
 CONFIG_MACH_SPEAR1340=y
 CONFIG_ARCH_STI=y
 CONFIG_ARCH_STM32=y
-CONFIG_ARCH_SUNPLUS=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_UNIPHIER=y
 CONFIG_ARCH_U8500=y
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VEXPRESS_TC2_PM=y
@@ -109,7 +110,6 @@ CONFIG_SMP=y
 CONFIG_NR_CPUS=16
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_KEXEC=y
 CONFIG_EFI=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
@@ -179,10 +179,10 @@ CONFIG_NFC_S3FWRN5_I2C=m
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_MVEBU=y
 CONFIG_PCI_TEGRA=y
-CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCIE_RCAR_HOST=y
-CONFIG_PCI_DRA7XX_EP=y
+CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCI_DRA7XX_EP=y
 CONFIG_PCI_ENDPOINT=y
 CONFIG_PCI_ENDPOINT_CONFIGFS=y
 CONFIG_PCI_EPF_TEST=m
@@ -272,6 +272,7 @@ CONFIG_KS8851=y
 CONFIG_LAN966X_SWITCH=m
 CONFIG_R8169=y
 CONFIG_SH_ETH=y
+CONFIG_RAVB=y
 CONFIG_SMSC911X=y
 CONFIG_SNI_AVE=y
 CONFIG_STMMAC_ETH=y
@@ -523,6 +524,7 @@ CONFIG_CHARGER_TPS65090=y
 CONFIG_BATTERY_ACER_A500=m
 CONFIG_SENSORS_ARM_SCMI=y
 CONFIG_SENSORS_ASPEED=m
+CONFIG_SENSORS_GXP_FAN_CTRL=m
 CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_SENSORS_LAN966X=m
 CONFIG_SENSORS_LM90=y
@@ -531,7 +533,6 @@ CONFIG_SENSORS_NTC_THERMISTOR=m
 CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_SENSORS_INA2XX=m
-CONFIG_SENSORS_GXP_FAN_CTRL=m
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
 CONFIG_IMX_THERMAL=y
@@ -691,6 +692,7 @@ CONFIG_VIDEO_STI_BDISP=m
 CONFIG_VIDEO_STI_DELTA=m
 CONFIG_VIDEO_STI_HVA=m
 CONFIG_VIDEO_STM32_DCMI=m
+CONFIG_VIDEO_STM32_DCMIPP=m
 CONFIG_V4L_TEST_DRIVERS=y
 CONFIG_VIDEO_VIVID=m
 CONFIG_VIDEO_S5C73M3=m
@@ -1072,6 +1074,7 @@ CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_OMAP2PLUS_MBOX=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_QCOM_APCS_IPC=y
+CONFIG_STM32_IPCC=m
 CONFIG_QCOM_IPCC=y
 CONFIG_OMAP_IOMMU=y
 CONFIG_OMAP_IOMMU_DEBUG=y
@@ -1087,20 +1090,18 @@ CONFIG_QCOM_Q6V5_MSS=m
 CONFIG_QCOM_SYSMON=m
 CONFIG_QCOM_WCNSS_PIL=m
 CONFIG_ST_REMOTEPROC=m
+CONFIG_RPMSG_CHAR=m
+CONFIG_RPMSG_CTRL=m
 CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RPMSG_VIRTIO=m
 CONFIG_ASPEED_LPC_CTRL=m
 CONFIG_ASPEED_LPC_SNOOP=m
 CONFIG_ASPEED_P2A_CTRL=m
-CONFIG_RASPBERRYPI_POWER=y
 CONFIG_QCOM_COMMAND_DB=m
-CONFIG_QCOM_CPR=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_OCMEM=m
 CONFIG_QCOM_RMTFS_MEM=m
 CONFIG_QCOM_RPMH=y
-CONFIG_QCOM_RPMHPD=y
-CONFIG_QCOM_RPMPD=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
@@ -1128,11 +1129,15 @@ CONFIG_ARCH_R8A7744=y
 CONFIG_ARCH_R9A06G032=y
 CONFIG_ARCH_SH73A0=y
 CONFIG_ROCKCHIP_IODOMAIN=y
-CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
 CONFIG_ARCH_TEGRA_114_SOC=y
 CONFIG_ARCH_TEGRA_124_SOC=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_QCOM_CPR=y
+CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RPMPD=y
+CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARM_EXYNOS_BUS_DEVFREQ=m
 CONFIG_ARM_TEGRA_DEVFREQ=m
 CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m
@@ -1191,6 +1196,7 @@ CONFIG_PWM_TEGRA=y
 CONFIG_PWM_VT8500=y
 CONFIG_KEYSTONE_IRQ=y
 CONFIG_RESET_MCHP_SPARX5=y
+CONFIG_RESET_SCMI=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
 CONFIG_PHY_BRCM_USB=m
@@ -1240,8 +1246,8 @@ CONFIG_OPTEE=y
 CONFIG_INTERCONNECT_QCOM=y
 CONFIG_INTERCONNECT_QCOM_MSM8916=y
 CONFIG_COUNTER=m
-CONFIG_STM32_TIMER_CNT=m
 CONFIG_STM32_LPTIMER_CNT=m
+CONFIG_STM32_TIMER_CNT=m
 CONFIG_EXT4_FS=y
 CONFIG_AUTOFS_FS=y
 CONFIG_MSDOS_FS=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 4ed6e8c8e164..3343f72de7ea 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -3,7 +3,6 @@ CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
@@ -52,7 +51,6 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_ATA=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_NET_PCI=y
 CONFIG_MV643XX_ETH=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index feb38a94c1a7..43bc1255a5db 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -138,7 +138,8 @@ CONFIG_PWM_MXS=y
 CONFIG_NVMEM_MXS_OCOTP=y
 CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
-CONFIG_FSCACHE=m
+CONFIG_NETFS_SUPPORT=m
+CONFIG_FSCACHE=y
 CONFIG_FSCACHE_STATS=y
 CONFIG_CACHEFILES=m
 CONFIG_VFAT_FS=y
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index c333406ce5e3..2227f86100ad 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -38,7 +38,6 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_SCSI=m
 CONFIG_BLK_DEV_SD=m
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_SMC=y
 CONFIG_PCMCIA_PCNET=y
 CONFIG_SMC9194=y
diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index 30ff6fbce5a3..e639e6ad02cb 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -27,7 +27,6 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_PATA_WINBOND=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_NET_TULIP=y
 CONFIG_TULIP=y
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 7c2cc7a89511..729ea8157e2a 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -28,7 +28,6 @@ CONFIG_MACH_OMAP_PALMTE=y
 CONFIG_MACH_SX1=y
 CONFIG_MACH_NOKIA770=y
 CONFIG_MACH_AMS_DELTA=y
-CONFIG_MACH_OMAP_GENERIC=y
 CONFIG_AEABI=y
 CONFIG_CMDLINE="root=1f03 rootfstype=jffs2"
 CONFIG_FPE_NWFPE=y
@@ -40,7 +39,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
 # CONFIG_SWAP is not set
-CONFIG_SLUB=y
 CONFIG_SLUB_TINY=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
@@ -132,14 +130,14 @@ CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_VIRTUAL=y
 CONFIG_FB_OMAP=y
 CONFIG_FB_OMAP_LCDC_EXTERNAL=y
 CONFIG_FB_OMAP_LCDC_HWA742=y
 CONFIG_FB_OMAP_MANUAL_UPDATE=y
 CONFIG_FB_OMAP_LCD_MIPID=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 7b1b41b4b160..3a166c2f02bd 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -607,6 +607,7 @@ CONFIG_LEDS_LP55XX_COMMON=m
 CONFIG_LEDS_LP5523=m
 CONFIG_LEDS_PCA963X=m
 CONFIG_LEDS_PWM=m
+CONFIG_LEDS_BD2606MVV=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_ONESHOT=m
@@ -624,6 +625,7 @@ CONFIG_RTC_DRV_PALMAS=m
 CONFIG_RTC_DRV_OMAP=m
 CONFIG_RTC_DRV_CPCAP=m
 CONFIG_DMADEVICES=y
+CONFIG_CLK_TWL=m
 CONFIG_CLK_TWL6040=m
 CONFIG_COMMON_CLK_PALMAS=m
 CONFIG_OMAP_IOMMU=y
@@ -646,6 +648,9 @@ CONFIG_CPCAP_ADC=m
 CONFIG_INA2XX_ADC=m
 CONFIG_TI_AM335X_ADC=m
 CONFIG_TWL4030_MADC=m
+CONFIG_TWL6030_GPADC=m
+CONFIG_MPU3050_I2C=m
+CONFIG_INV_MPU6050_I2C=m
 CONFIG_SENSORS_ISL29028=m
 CONFIG_AK8975=m
 CONFIG_BMP280=m
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index ec3a43f9c85e..ce10fe2104bf 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,5 +1,4 @@
 CONFIG_SYSVIPC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -22,7 +21,6 @@ CONFIG_IP_PNP=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
index 7f95fa273a7d..381356faf382 100644
--- a/arch/arm/configs/pxa3xx_defconfig
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -1,7 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -34,7 +33,6 @@ CONFIG_MTD_NAND_MARVELL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_KEYBOARD_ATKBD is not set
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index 958d958377dc..1f28aea86014 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -3,7 +3,6 @@ CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_ARCH_MMP=y
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk"
@@ -23,7 +22,6 @@ CONFIG_IP_PNP=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 9e81b1849e4c..f2ca5c9131b5 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -10,9 +10,10 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=13
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
+CONFIG_KEXEC=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_ARCH_GUMSTIX=y
@@ -22,7 +23,6 @@ CONFIG_MACH_BORZOI=y
 CONFIG_AEABI=y
 CONFIG_ARCH_FORCE_MAX_ORDER=8
 CONFIG_CMDLINE="root=/dev/ram0 ro"
-CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -44,7 +44,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_LDM_PARTITION=y
 CONFIG_CMDLINE_PARTITION=y
 CONFIG_BINFMT_MISC=y
-CONFIG_SLUB=y
 CONFIG_SLUB_TINY=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -380,8 +379,6 @@ CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_PXA27x=m
 CONFIG_DRM=m
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
 CONFIG_FB_PXA_PARAMETERS=y
@@ -393,6 +390,8 @@ CONFIG_LCD_CORGI=m
 CONFIG_LCD_PLATFORM=m
 CONFIG_BACKLIGHT_PWM=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_TILEBLITTING=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 737d51412eb2..ec52ccece0ca 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -6,8 +6,8 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_MSM8X60=y
@@ -139,11 +139,11 @@ CONFIG_PINCTRL_MDM9615=y
 CONFIG_PINCTRL_MSM8X74=y
 CONFIG_PINCTRL_MSM8909=y
 CONFIG_PINCTRL_MSM8916=y
-CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
-CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIOLIB=y
 CONFIG_PINCTRL_SDX55=y
 CONFIG_PINCTRL_SDX65=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_MSM=y
@@ -259,8 +259,6 @@ CONFIG_QCOM_OCMEM=y
 CONFIG_QCOM_PM=y
 CONFIG_QCOM_RMTFS_MEM=y
 CONFIG_QCOM_RPMH=y
-CONFIG_QCOM_RPMHPD=y
-CONFIG_QCOM_RPMPD=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
@@ -268,6 +266,8 @@ CONFIG_QCOM_SMSM=y
 CONFIG_QCOM_SOCINFO=y
 CONFIG_QCOM_STATS=y
 CONFIG_QCOM_WCNSS_CTRL=y
+CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RPMPD=y
 CONFIG_EXTCON_QCOM_SPMI_MISC=y
 CONFIG_IIO=y
 CONFIG_IIO_BUFFER_CB=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index a221a99f6472..febea5cf7aaa 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -9,8 +9,6 @@ CONFIG_MACH_REALVIEW_EB=y
 CONFIG_REALVIEW_EB_ARM1136=y
 CONFIG_REALVIEW_EB_ARM1176=y
 CONFIG_REALVIEW_EB_A9MP=y
-CONFIG_REALVIEW_EB_ARM11MP=y
-CONFIG_MACH_REALVIEW_PB11MP=y
 CONFIG_MACH_REALVIEW_PB1176=y
 CONFIG_MACH_REALVIEW_PBA8=y
 CONFIG_MACH_REALVIEW_PBX=y
@@ -58,6 +56,8 @@ CONFIG_GPIOLIB=y
 # CONFIG_HWMON is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_AUXDISPLAY=y
+CONFIG_ARM_CHARLCD=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
@@ -85,8 +85,6 @@ CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_PL031=y
-CONFIG_AUXDISPLAY=y
-CONFIG_ARM_CHARLCD=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index b1d12a2c2ef8..24f1fa868230 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -2,13 +2,13 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_RPC=y
 CONFIG_CPU_SA110=y
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_NET=y
@@ -45,7 +45,6 @@ CONFIG_ATA=y
 CONFIG_PATA_ICSIDE=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_ARM_ETHER1=y
 CONFIG_ARM_ETHER3=y
 CONFIG_ARM_ETHERH=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 93258d5b57ff..a37e6ac40825 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -1,5 +1,3 @@
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_ARCH_MULTI_V6=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
index d280169081bd..5dbe85c263de 100644
--- a/arch/arm/configs/s5pv210_defconfig
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -3,8 +3,6 @@ CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_CGROUPS=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_ARCH_S5PV210=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index 0e030063130f..9096a99b5abd 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -6,6 +6,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
@@ -14,7 +15,6 @@ CONFIG_SOC_SAMA5D4=y
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
 CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
-CONFIG_KEXEC=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
index be0cfed4ecf1..7fa5d251ced2 100644
--- a/arch/arm/configs/sama7_defconfig
+++ b/arch/arm/configs/sama7_defconfig
@@ -6,13 +6,11 @@ CONFIG_LOG_BUF_SHIFT=16
 CONFIG_CGROUPS=y
 CONFIG_CGROUP_DEBUG=y
 CONFIG_NAMESPACES=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
 # CONFIG_FHANDLE is not set
 # CONFIG_IO_URING is not set
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EXPERT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAMA7G5=y
 CONFIG_ATMEL_CLOCKSOURCE_TCB=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index dfdea295c4af..c47a638172a8 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -75,6 +75,7 @@ CONFIG_SERIAL_8250=y
 # CONFIG_SERIAL_8250_16550A_VARIANTS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_EXAR is not set
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_EM=y
 # CONFIG_SERIAL_8250_PERICOM is not set
@@ -134,8 +135,10 @@ CONFIG_VIDEO_ADV7604=y
 CONFIG_VIDEO_ADV7604_CEC=y
 CONFIG_VIDEO_ML86V7667=y
 CONFIG_DRM=y
+CONFIG_DRM_FBDEV_EMULATION=y
 CONFIG_DRM_RCAR_DU=y
 # CONFIG_DRM_RCAR_USE_MIPI_DSI is not set
+CONFIG_DRM_SHMOBILE=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
@@ -144,8 +147,7 @@ CONFIG_DRM_SII902X=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FB_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_AS3711=y
 CONFIG_SOUND=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 10108b4a978e..294d16ddeb18 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -2,7 +2,6 @@ CONFIG_SYSVIPC=y
 CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_PROFILING=y
@@ -87,7 +86,6 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_ATA=y
 CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_PCMCIA_PCNET=m
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index e95aba916547..b9fe3fbed5ae 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -4,6 +4,7 @@ CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
@@ -11,7 +12,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-CONFIG_EXPERT=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_MMU is not set
 CONFIG_ARCH_STM32=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 8635b7216bfc..d2a094ad360c 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -13,13 +13,13 @@ CONFIG_CGROUP_DEBUG=y
 CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_ELF_CORE is not set
 CONFIG_EXPERT=y
+# CONFIG_ELF_CORE is not set
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_SMP=y
 CONFIG_HIGHMEM=y
-CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
diff --git a/arch/arm/configs/vf610m4_defconfig b/arch/arm/configs/vf610m4_defconfig
index 963ff0a03311..a5609cbfdfb3 100644
--- a/arch/arm/configs/vf610m4_defconfig
+++ b/arch/arm/configs/vf610m4_defconfig
@@ -4,8 +4,8 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_LZMA is not set
 # CONFIG_RD_XZ is not set
 # CONFIG_RD_LZ4 is not set
-CONFIG_KALLSYMS_ALL=y
 CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_MMU is not set
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_VF610=y
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index f6181f69577f..1075534b0a2e 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -340,6 +340,8 @@ static inline void flush_cache_vmap(unsigned long start, unsigned long end)
 		dsb(ishst);
 }
 
+#define flush_cache_vmap_early(start, end)	do { } while (0)
+
 static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
 {
 	if (!cache_is_vipt_nonaliasing())
diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h
index aaaedafef7cc..9fd9ad5d9202 100644
--- a/arch/arm/include/asm/hardware/locomo.h
+++ b/arch/arm/include/asm/hardware/locomo.h
@@ -158,8 +158,6 @@
 #define LOCOMO_LPT_TOH(TOH)	((TOH & 0x7) << 4)
 #define LOCOMO_LPT_TOL(TOL)	((TOL & 0x7))
 
-extern struct bus_type locomo_bus_type;
-
 #define LOCOMO_DEVID_KEYBOARD	0
 #define LOCOMO_DEVID_FRONTLIGHT	1
 #define LOCOMO_DEVID_BACKLIGHT	2
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 56b08ed6cc3b..1815748f5d2a 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -407,12 +407,6 @@ struct pci_dev;
 #define pci_iounmap pci_iounmap
 extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
 #include <asm-generic/io.h>
 
 #ifdef CONFIG_MMU
diff --git a/arch/arm/include/asm/irq_work.h b/arch/arm/include/asm/irq_work.h
index 3149e4dc1b54..8895999834cc 100644
--- a/arch/arm/include/asm/irq_work.h
+++ b/arch/arm/include/asm/irq_work.h
@@ -9,6 +9,4 @@ static inline bool arch_irq_work_has_interrupt(void)
 	return is_smp();
 }
 
-extern void arch_irq_work_raise(void);
-
 #endif /* _ASM_ARM_IRQ_WORK_H */
diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h
index e12d7d096fc0..e4eb54f6cd9f 100644
--- a/arch/arm/include/asm/jump_label.h
+++ b/arch/arm/include/asm/jump_label.h
@@ -11,7 +11,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 WASM(nop) "\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"
@@ -25,7 +25,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 WASM(b) " %l[l_yes]\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 16b02f44c7d3..d657b84b6bf7 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -151,6 +151,8 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
+#define pgdp_get(pgpd)		READ_ONCE(*pgdp)
+
 #define pud_page(pud)		pmd_page(__pmd(pud_val(pud)))
 #define pud_write(pud)		pmd_write(__pmd(pud_val(pud)))
 
diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
index c7d2510e5a78..853c4f81ba4a 100644
--- a/arch/arm/include/asm/topology.h
+++ b/arch/arm/include/asm/topology.h
@@ -13,6 +13,7 @@
 #define arch_set_freq_scale topology_set_freq_scale
 #define arch_scale_freq_capacity topology_get_freq_scale
 #define arch_scale_freq_invariant topology_scale_freq_invariant
+#define arch_scale_freq_ref topology_get_freq_ref
 #endif
 
 /* Replace task scheduler's default cpu-invariant accounting */
diff --git a/arch/arm/include/asm/vdso.h b/arch/arm/include/asm/vdso.h
index 422c3afa806a..5b85889f82ee 100644
--- a/arch/arm/include/asm/vdso.h
+++ b/arch/arm/include/asm/vdso.h
@@ -24,11 +24,6 @@ static inline void arm_install_vdso(struct mm_struct *mm, unsigned long addr)
 
 #endif /* CONFIG_VDSO */
 
-int __vdso_clock_gettime(clockid_t clock, struct old_timespec32 *ts);
-int __vdso_clock_gettime64(clockid_t clock, struct __kernel_timespec *ts);
-int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz);
-int __vdso_clock_getres(clockid_t clock_id, struct old_timespec32 *res);
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
diff --git a/arch/arm/kernel/atags_proc.c b/arch/arm/kernel/atags_proc.c
index 3ec2afe78423..cd09f8ab93e3 100644
--- a/arch/arm/kernel/atags_proc.c
+++ b/arch/arm/kernel/atags_proc.c
@@ -7,7 +7,7 @@
 
 struct buffer {
 	size_t size;
-	char data[];
+	char data[] __counted_by(size);
 };
 
 static ssize_t atags_read(struct file *file, char __user *buf,
@@ -54,7 +54,7 @@ static int __init init_atags_procfs(void)
 
 	WARN_ON(tag->hdr.tag != ATAG_NONE);
 
-	b = kmalloc(sizeof(*b) + size, GFP_KERNEL);
+	b = kmalloc(struct_size(b, data, size), GFP_KERNEL);
 	if (!b)
 		goto nomem;
 
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index 1ae99deeec54..d9fd53841591 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -113,69 +113,6 @@ static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
 };
 
-enum armv6mpcore_perf_types {
-	ARMV6MPCORE_PERFCTR_ICACHE_MISS	    = 0x0,
-	ARMV6MPCORE_PERFCTR_IBUF_STALL	    = 0x1,
-	ARMV6MPCORE_PERFCTR_DDEP_STALL	    = 0x2,
-	ARMV6MPCORE_PERFCTR_ITLB_MISS	    = 0x3,
-	ARMV6MPCORE_PERFCTR_DTLB_MISS	    = 0x4,
-	ARMV6MPCORE_PERFCTR_BR_EXEC	    = 0x5,
-	ARMV6MPCORE_PERFCTR_BR_NOTPREDICT   = 0x6,
-	ARMV6MPCORE_PERFCTR_BR_MISPREDICT   = 0x7,
-	ARMV6MPCORE_PERFCTR_INSTR_EXEC	    = 0x8,
-	ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
-	ARMV6MPCORE_PERFCTR_DCACHE_RDMISS   = 0xB,
-	ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
-	ARMV6MPCORE_PERFCTR_DCACHE_WRMISS   = 0xD,
-	ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
-	ARMV6MPCORE_PERFCTR_SW_PC_CHANGE    = 0xF,
-	ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS   = 0x10,
-	ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
-	ARMV6MPCORE_PERFCTR_LSU_FULL_STALL  = 0x12,
-	ARMV6MPCORE_PERFCTR_WBUF_DRAINED    = 0x13,
-	ARMV6MPCORE_PERFCTR_CPU_CYCLES	    = 0xFF,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV6MPCORE_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV6MPCORE_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV6MPCORE_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV6MPCORE_PERFCTR_IBUF_STALL,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV6MPCORE_PERFCTR_LSU_FULL_STALL,
-};
-
-static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
-
-	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_ICACHE_MISS,
-
-	/*
-	 * The ARM performance counters can count micro DTLB misses, micro ITLB
-	 * misses and main TLB misses. There isn't an event for TLB misses, so
-	 * use the micro misses here and if users want the main TLB misses they
-	 * can use a raw counter.
-	 */
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_DTLB_MISS,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_DTLB_MISS,
-
-	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_ITLB_MISS,
-	[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_ITLB_MISS,
-};
-
 static inline unsigned long
 armv6_pmcr_read(void)
 {
@@ -268,10 +205,8 @@ static inline void armv6pmu_write_counter(struct perf_event *event, u64 value)
 
 static void armv6pmu_enable_event(struct perf_event *event)
 {
-	unsigned long val, mask, evt, flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+	unsigned long val, mask, evt;
 	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	if (ARMV6_CYCLE_COUNTER == idx) {
@@ -294,12 +229,10 @@ static void armv6pmu_enable_event(struct perf_event *event)
 	 * Mask out the current event and set the counter to count the event
 	 * that we're interested in.
 	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = armv6_pmcr_read();
 	val &= ~mask;
 	val |= evt;
 	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static irqreturn_t
@@ -362,26 +295,20 @@ armv6pmu_handle_irq(struct arm_pmu *cpu_pmu)
 
 static void armv6pmu_start(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+	unsigned long val;
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = armv6_pmcr_read();
 	val |= ARMV6_PMCR_ENABLE;
 	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void armv6pmu_stop(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+	unsigned long val;
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = armv6_pmcr_read();
 	val &= ~ARMV6_PMCR_ENABLE;
 	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static int
@@ -419,10 +346,8 @@ static void armv6pmu_clear_event_idx(struct pmu_hw_events *cpuc,
 
 static void armv6pmu_disable_event(struct perf_event *event)
 {
-	unsigned long val, mask, evt, flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+	unsigned long val, mask, evt;
 	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	if (ARMV6_CYCLE_COUNTER == idx) {
@@ -444,43 +369,10 @@ static void armv6pmu_disable_event(struct perf_event *event)
 	 * of ETM bus signal assertion cycles. The external reporting should
 	 * be disabled and so this should never increment.
 	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void armv6mpcore_pmu_disable_event(struct perf_event *event)
-{
-	unsigned long val, mask, flags, evt = 0;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-	int idx = hwc->idx;
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= ARMV6_PMCR_CCOUNT_IEN;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_COUNT0_IEN;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_COUNT1_IEN;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Unlike UP ARMv6, we don't have a way of stopping the counters. We
-	 * simply disable the interrupt reporting.
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = armv6_pmcr_read();
 	val &= ~mask;
 	val |= evt;
 	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static int armv6_map_event(struct perf_event *event)
@@ -525,40 +417,7 @@ static int armv6_1176_pmu_init(struct arm_pmu *cpu_pmu)
 	return 0;
 }
 
-/*
- * ARMv6mpcore is almost identical to single core ARMv6 with the exception
- * that some of the events have different enumerations and that there is no
- * *hack* to stop the programmable counters. To stop the counters we simply
- * disable the interrupt reporting and update the event. When unthrottling we
- * reset the period and enable the interrupt reporting.
- */
-
-static int armv6mpcore_map_event(struct perf_event *event)
-{
-	return armpmu_map_event(event, &armv6mpcore_perf_map,
-				&armv6mpcore_perf_cache_map, 0xFF);
-}
-
-static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	cpu_pmu->name		= "armv6_11mpcore";
-	cpu_pmu->handle_irq	= armv6pmu_handle_irq;
-	cpu_pmu->enable		= armv6pmu_enable_event;
-	cpu_pmu->disable	= armv6mpcore_pmu_disable_event;
-	cpu_pmu->read_counter	= armv6pmu_read_counter;
-	cpu_pmu->write_counter	= armv6pmu_write_counter;
-	cpu_pmu->get_event_idx	= armv6pmu_get_event_idx;
-	cpu_pmu->clear_event_idx = armv6pmu_clear_event_idx;
-	cpu_pmu->start		= armv6pmu_start;
-	cpu_pmu->stop		= armv6pmu_stop;
-	cpu_pmu->map_event	= armv6mpcore_map_event;
-	cpu_pmu->num_events	= 3;
-
-	return 0;
-}
-
 static const struct of_device_id armv6_pmu_of_device_ids[] = {
-	{.compatible = "arm,arm11mpcore-pmu",	.data = armv6mpcore_pmu_init},
 	{.compatible = "arm,arm1176-pmu",	.data = armv6_1176_pmu_init},
 	{.compatible = "arm,arm1136-pmu",	.data = armv6_1136_pmu_init},
 	{ /* sentinel value */ }
@@ -568,7 +427,6 @@ static const struct pmu_probe_info armv6_pmu_probe_table[] = {
 	ARM_PMU_PROBE(ARM_CPU_PART_ARM1136, armv6_1136_pmu_init),
 	ARM_PMU_PROBE(ARM_CPU_PART_ARM1156, armv6_1156_pmu_init),
 	ARM_PMU_PROBE(ARM_CPU_PART_ARM1176, armv6_1176_pmu_init),
-	ARM_PMU_PROBE(ARM_CPU_PART_ARM11MPCORE, armv6mpcore_pmu_init),
 	{ /* sentinel value */ }
 };
 
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index eb2190477da1..a3322e2b3ea4 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -870,10 +870,8 @@ static void armv7_pmnc_dump_regs(struct arm_pmu *cpu_pmu)
 
 static void armv7pmu_enable_event(struct perf_event *event)
 {
-	unsigned long flags;
 	struct hw_perf_event *hwc = &event->hw;
 	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) {
@@ -886,7 +884,6 @@ static void armv7pmu_enable_event(struct perf_event *event)
 	 * Enable counter and interrupt, and set the counter to count
 	 * the event that we're interested in.
 	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 
 	/*
 	 * Disable counter
@@ -910,16 +907,12 @@ static void armv7pmu_enable_event(struct perf_event *event)
 	 * Enable counter
 	 */
 	armv7_pmnc_enable_counter(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void armv7pmu_disable_event(struct perf_event *event)
 {
-	unsigned long flags;
 	struct hw_perf_event *hwc = &event->hw;
 	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) {
@@ -931,7 +924,6 @@ static void armv7pmu_disable_event(struct perf_event *event)
 	/*
 	 * Disable counter and interrupt
 	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 
 	/*
 	 * Disable counter
@@ -942,8 +934,6 @@ static void armv7pmu_disable_event(struct perf_event *event)
 	 * Disable interrupt for this counter
 	 */
 	armv7_pmnc_disable_intens(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static irqreturn_t armv7pmu_handle_irq(struct arm_pmu *cpu_pmu)
@@ -1009,24 +999,14 @@ static irqreturn_t armv7pmu_handle_irq(struct arm_pmu *cpu_pmu)
 
 static void armv7pmu_start(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	/* Enable all counters */
 	armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void armv7pmu_stop(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	/* Disable all counters */
 	armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc,
@@ -1072,8 +1052,10 @@ static int armv7pmu_set_event_filter(struct hw_perf_event *event,
 {
 	unsigned long config_base = 0;
 
-	if (attr->exclude_idle)
-		return -EPERM;
+	if (attr->exclude_idle) {
+		pr_debug("ARM performance counters do not support mode exclusion\n");
+		return -EOPNOTSUPP;
+	}
 	if (attr->exclude_user)
 		config_base |= ARMV7_EXCLUDE_USER;
 	if (attr->exclude_kernel)
@@ -1492,14 +1474,10 @@ static void krait_clearpmu(u32 config_base)
 
 static void krait_pmu_disable_event(struct perf_event *event)
 {
-	unsigned long flags;
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 
 	/* Disable counter and interrupt */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 
 	/* Disable counter */
 	armv7_pmnc_disable_counter(idx);
@@ -1512,23 +1490,17 @@ static void krait_pmu_disable_event(struct perf_event *event)
 
 	/* Disable interrupt for this counter */
 	armv7_pmnc_disable_intens(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void krait_pmu_enable_event(struct perf_event *event)
 {
-	unsigned long flags;
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 
 	/*
 	 * Enable counter and interrupt, and set the counter to count
 	 * the event that we're interested in.
 	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 
 	/* Disable counter */
 	armv7_pmnc_disable_counter(idx);
@@ -1548,8 +1520,6 @@ static void krait_pmu_enable_event(struct perf_event *event)
 
 	/* Enable counter */
 	armv7_pmnc_enable_counter(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void krait_pmu_reset(void *info)
@@ -1825,14 +1795,10 @@ static void scorpion_clearpmu(u32 config_base)
 
 static void scorpion_pmu_disable_event(struct perf_event *event)
 {
-	unsigned long flags;
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 
 	/* Disable counter and interrupt */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 
 	/* Disable counter */
 	armv7_pmnc_disable_counter(idx);
@@ -1845,23 +1811,17 @@ static void scorpion_pmu_disable_event(struct perf_event *event)
 
 	/* Disable interrupt for this counter */
 	armv7_pmnc_disable_intens(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void scorpion_pmu_enable_event(struct perf_event *event)
 {
-	unsigned long flags;
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 
 	/*
 	 * Enable counter and interrupt, and set the counter to count
 	 * the event that we're interested in.
 	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 
 	/* Disable counter */
 	armv7_pmnc_disable_counter(idx);
@@ -1881,8 +1841,6 @@ static void scorpion_pmu_enable_event(struct perf_event *event)
 
 	/* Enable counter */
 	armv7_pmnc_enable_counter(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void scorpion_pmu_reset(void *info)
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index f6cdcacfb96d..7a2ba1c689a7 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -203,10 +203,8 @@ xscale1pmu_handle_irq(struct arm_pmu *cpu_pmu)
 
 static void xscale1pmu_enable_event(struct perf_event *event)
 {
-	unsigned long val, mask, evt, flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+	unsigned long val, mask, evt;
 	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	switch (idx) {
@@ -229,20 +227,16 @@ static void xscale1pmu_enable_event(struct perf_event *event)
 		return;
 	}
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = xscale1pmu_read_pmnc();
 	val &= ~mask;
 	val |= evt;
 	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void xscale1pmu_disable_event(struct perf_event *event)
 {
-	unsigned long val, mask, evt, flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+	unsigned long val, mask, evt;
 	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	switch (idx) {
@@ -263,12 +257,10 @@ static void xscale1pmu_disable_event(struct perf_event *event)
 		return;
 	}
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = xscale1pmu_read_pmnc();
 	val &= ~mask;
 	val |= evt;
 	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static int
@@ -300,26 +292,20 @@ static void xscalepmu_clear_event_idx(struct pmu_hw_events *cpuc,
 
 static void xscale1pmu_start(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+	unsigned long val;
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = xscale1pmu_read_pmnc();
 	val |= XSCALE_PMU_ENABLE;
 	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void xscale1pmu_stop(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+	unsigned long val;
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = xscale1pmu_read_pmnc();
 	val &= ~XSCALE_PMU_ENABLE;
 	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static inline u64 xscale1pmu_read_counter(struct perf_event *event)
@@ -549,10 +535,8 @@ xscale2pmu_handle_irq(struct arm_pmu *cpu_pmu)
 
 static void xscale2pmu_enable_event(struct perf_event *event)
 {
-	unsigned long flags, ien, evtsel;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+	unsigned long ien, evtsel;
 	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	ien = xscale2pmu_read_int_enable();
@@ -587,18 +571,14 @@ static void xscale2pmu_enable_event(struct perf_event *event)
 		return;
 	}
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	xscale2pmu_write_event_select(evtsel);
 	xscale2pmu_write_int_enable(ien);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void xscale2pmu_disable_event(struct perf_event *event)
 {
-	unsigned long flags, ien, evtsel, of_flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+	unsigned long ien, evtsel, of_flags;
 	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	ien = xscale2pmu_read_int_enable();
@@ -638,11 +618,9 @@ static void xscale2pmu_disable_event(struct perf_event *event)
 		return;
 	}
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	xscale2pmu_write_event_select(evtsel);
 	xscale2pmu_write_int_enable(ien);
 	xscale2pmu_write_overflow_flags(of_flags);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static int
@@ -663,26 +641,20 @@ out:
 
 static void xscale2pmu_start(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+	unsigned long val;
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
 	val |= XSCALE_PMU_ENABLE;
 	xscale2pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void xscale2pmu_stop(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+	unsigned long val;
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = xscale2pmu_read_pmnc();
 	val &= ~XSCALE_PMU_ENABLE;
 	xscale2pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static inline u64 xscale2pmu_read_counter(struct perf_event *event)
diff --git a/arch/arm/mach-airoha/Makefile b/arch/arm/mach-airoha/Makefile
deleted file mode 100644
index a5857d0d02eb..000000000000
--- a/arch/arm/mach-airoha/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y			+= airoha.o
diff --git a/arch/arm/mach-airoha/airoha.c b/arch/arm/mach-airoha/airoha.c
deleted file mode 100644
index ea23b5abb478..000000000000
--- a/arch/arm/mach-airoha/airoha.c
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Device Tree support for Airoha SoCs
- *
- * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
- */
-#include <asm/mach/arch.h>
-
-static const char * const airoha_board_dt_compat[] = {
-	"airoha,en7523",
-	NULL,
-};
-
-DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
-	.dt_compat	= airoha_board_dt_compat,
-MACHINE_END
diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig
deleted file mode 100644
index 74e0f61c74c8..000000000000
--- a/arch/arm/mach-asm9260/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config MACH_ASM9260
-	bool "Alphascale ASM9260"
-	depends on ARCH_MULTI_V5
-	depends on CPU_LITTLE_ENDIAN
-	select CPU_ARM926T
-	select ASM9260_TIMER
-	help
-	  Support for Alphascale ASM9260 based platform.
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 1a26af0fabc7..345b91dc6627 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -1103,6 +1103,7 @@ static void __init at91_pm_secure_init(void)
 	if (res.a0 == 0) {
 		pr_info("AT91: Secure PM: suspend mode set to %s\n",
 			pm_modes[suspend_mode].pattern);
+		soc_pm.data.mode = suspend_mode;
 		return;
 	}
 
@@ -1112,6 +1113,7 @@ static void __init at91_pm_secure_init(void)
 	res = sam_smccc_call(SAMA5_SMC_SIP_GET_SUSPEND_MODE, 0, 0);
 	if (res.a0 == 0) {
 		pr_warn("AT91: Secure PM: failed to get default mode\n");
+		soc_pm.data.mode = -1;
 		return;
 	}
 
@@ -1119,6 +1121,7 @@ static void __init at91_pm_secure_init(void)
 		pm_modes[suspend_mode].pattern);
 
 	soc_pm.data.suspend_mode = res.a1;
+	soc_pm.data.mode = soc_pm.data.suspend_mode;
 }
 static const struct of_device_id atmel_shdwc_ids[] = {
 	{ .compatible = "atmel,sama5d2-shdwc" },
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 4316e1370627..2a8a9fe46586 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -4,12 +4,14 @@ menuconfig ARCH_DAVINCI
 	bool "TI DaVinci"
 	depends on ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
 	select DAVINCI_TIMER
 	select ZONE_DMA
 	select PM_GENERIC_DOMAINS if PM
 	select PM_GENERIC_DOMAINS_OF if PM && OF
 	select REGMAP_MMIO
 	select RESET_CONTROLLER
+	select PINCTRL
 	select PINCTRL_SINGLE
 
 if ARCH_DAVINCI
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 71b113976420..8b1ec60a9a46 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -339,6 +339,7 @@ static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
 				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 		GPIO_LOOKUP_IDX("G", 0, NULL, 1,
 				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		{ }
 	},
 };
 
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 4b90899a66e9..dbdb822a0100 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -88,7 +88,7 @@ static void __init edb93xx_register_i2c(void)
  * EDB93xx SPI peripheral handling
  *************************************************************************/
 static struct cs4271_platform_data edb93xx_cs4271_data = {
-	.gpio_nreset	= -EINVAL,	/* filled in later */
+	/* Intentionally left blank */
 };
 
 static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
@@ -114,14 +114,38 @@ static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
 	/* Intentionally left blank */
 };
 
+static struct gpiod_lookup_table edb93xx_cs4272_edb9301_gpio_table = {
+	.dev_id = "spi0.0", /* CS0 on SPI0 */
+	.table = {
+		GPIO_LOOKUP("A", 1, "reset", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table edb93xx_cs4272_edb9302_gpio_table = {
+	.dev_id = "spi0.0", /* CS0 on SPI0 */
+	.table = {
+		GPIO_LOOKUP("H", 2, "reset", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table edb93xx_cs4272_edb9315_gpio_table = {
+	.dev_id = "spi0.0", /* CS0 on SPI0 */
+	.table = {
+		GPIO_LOOKUP("B", 6, "reset", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init edb93xx_register_spi(void)
 {
 	if (machine_is_edb9301() || machine_is_edb9302())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
+		gpiod_add_lookup_table(&edb93xx_cs4272_edb9301_gpio_table);
 	else if (machine_is_edb9302a() || machine_is_edb9307a())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
+		gpiod_add_lookup_table(&edb93xx_cs4272_edb9302_gpio_table);
 	else if (machine_is_edb9315a())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
+		gpiod_add_lookup_table(&edb93xx_cs4272_edb9315_gpio_table);
 
 	gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table);
 	ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 30d9cf3791eb..9471938df64c 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -164,7 +164,7 @@ static struct i2c_board_info vision_i2c_info[] __initdata = {
  * SPI CS4271 Audio Codec
  *************************************************************************/
 static struct cs4271_platform_data vision_cs4271_data = {
-	.gpio_nreset	= EP93XX_GPIO_LINE_H(2),
+	/* Intentionally left blank */
 };
 
 /*************************************************************************
@@ -241,6 +241,15 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
 	},
 };
 
+static struct gpiod_lookup_table vision_spi_cs4271_gpio_table = {
+	.dev_id = "spi0.0", /* cs4271 @ CS0 */
+	.table = {
+		/* RESET */
+		GPIO_LOOKUP_IDX("H", 2, NULL, 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct gpiod_lookup_table vision_spi_cs_gpio_table = {
 	.dev_id = "spi0",
 	.table = {
@@ -292,6 +301,7 @@ static void __init vision_init_machine(void)
 
 	ep93xx_register_i2c(vision_i2c_info,
 				ARRAY_SIZE(vision_i2c_info));
+	gpiod_add_lookup_table(&vision_spi_cs4271_gpio_table);
 	gpiod_add_lookup_table(&vision_spi_mmc_gpio_table);
 	gpiod_add_lookup_table(&vision_spi_cs_gpio_table);
 	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index df69af932375..444a7eaa320c 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -13,7 +13,8 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/perf_event.h>
 #include <linux/slab.h>
 
@@ -103,7 +104,7 @@ struct mmdc_pmu {
 	struct device *dev;
 	struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
 	struct hlist_node node;
-	struct fsl_mmdc_devtype_data *devtype_data;
+	const struct fsl_mmdc_devtype_data *devtype_data;
 	struct clk *mmdc_ipg_clk;
 };
 
@@ -474,8 +475,6 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 	struct mmdc_pmu *pmu_mmdc;
 	char *name;
 	int ret;
-	const struct of_device_id *of_id =
-		of_match_device(imx_mmdc_dt_ids, &pdev->dev);
 
 	pmu_mmdc = kzalloc(sizeof(*pmu_mmdc), GFP_KERNEL);
 	if (!pmu_mmdc) {
@@ -507,7 +506,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 	}
 
 	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
-	pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
+	pmu_mmdc->devtype_data = device_get_match_data(&pdev->dev);
 
 	hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC,
 			HRTIMER_MODE_REL);
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
deleted file mode 100644
index 909c6573ba8b..000000000000
--- a/arch/arm/mach-moxart/Kconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_MOXART
-	bool "MOXA ART SoC"
-	depends on ARCH_MULTI_V4
-	depends on CPU_LITTLE_ENDIAN
-	select CPU_FA526
-	select ARM_DMA_MEM_BUFFERABLE
-	select FARADAY_FTINTC010
-	select FTTMR010_TIMER
-	select GPIOLIB
-	select PHYLIB if NETDEVICES
-	help
-	  Say Y here if you want to run your kernel on hardware with a
-	  MOXA ART SoC.
-	  The MOXA ART SoC is based on a Faraday FA526 ARMv4 32-bit
-	  192 MHz CPU with MMU and 16KB/8KB D/I-cache (UC-7112-LX).
-	  Used on models UC-7101, UC-7112/UC-7110, IA240/IA241, IA3341.
-
-if ARCH_MOXART
-
-config MACH_UC7112LX
-	bool "MOXA UC-7112-LX"
-	depends on ARCH_MOXART
-	help
-	  Say Y here if you intend to run this kernel on a MOXA
-	  UC-7112-LX embedded computer.
-
-endif
diff --git a/arch/arm/mach-moxart/Makefile b/arch/arm/mach-moxart/Makefile
deleted file mode 100644
index ded3e38fb98d..000000000000
--- a/arch/arm/mach-moxart/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Object file lists.
-
-obj-$(CONFIG_MACH_UC7112LX)	+= moxart.o
diff --git a/arch/arm/mach-moxart/moxart.c b/arch/arm/mach-moxart/moxart.c
deleted file mode 100644
index f1f58c0c0fa1..000000000000
--- a/arch/arm/mach-moxart/moxart.c
+++ /dev/null
@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-moxart/moxart.c
- *
- * (C) Copyright 2013, Jonas Jensen <jonas.jensen@gmail.com>
- */
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 3faf9a1e3e36..6e017fa306c8 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -356,7 +356,9 @@ static int __init mxs_restart_init(void)
 {
 	struct device_node *np;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
+	if (!np)
+		np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
 	reset_addr = of_iomap(np, 0);
 	if (!reset_addr)
 		return -ENODEV;
diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
deleted file mode 100644
index 0ffdcaca1e6b..000000000000
--- a/arch/arm/mach-nspire/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config ARCH_NSPIRE
-	bool "TI-NSPIRE based"
-	depends on ARCH_MULTI_V4T
-	depends on CPU_LITTLE_ENDIAN
-	select CPU_ARM926T
-	select GENERIC_IRQ_CHIP
-	select ARM_AMBA
-	select ARM_VIC
-	select ARM_TIMER_SP804
-	select NSPIRE_TIMER
-	select POWER_RESET
-	select POWER_RESET_SYSCON
-	help
-	  This enables support for systems using the TI-NSPIRE CPU
diff --git a/arch/arm/mach-nspire/Makefile b/arch/arm/mach-nspire/Makefile
deleted file mode 100644
index 4716b9b9aa7b..000000000000
--- a/arch/arm/mach-nspire/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y				+= nspire.o
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
deleted file mode 100644
index 2fbfc23237ff..000000000000
--- a/arch/arm/mach-nspire/nspire.c
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-
-#include <asm/mach/arch.h>
-
-static const char *const nspire_dt_match[] __initconst = {
-	"ti,nspire",
-	"ti,nspire-cx",
-	"ti,nspire-tp",
-	"ti,nspire-clp",
-	NULL,
-};
-
-DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
-	.dt_compat	= nspire_dt_match,
-MACHINE_END
diff --git a/arch/arm/mach-rda/Kconfig b/arch/arm/mach-rda/Kconfig
deleted file mode 100644
index 4d2e4e046cb3..000000000000
--- a/arch/arm/mach-rda/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_RDA
-	bool "RDA Micro SoCs"
-	depends on ARCH_MULTI_V7
-	select RDA_INTC
-	select RDA_TIMER
-	help
-	  This enables support for the RDA Micro 8810PL SoC family.
diff --git a/arch/arm/mach-s3c/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c
index 8fce1e815ee8..2de1a89f6e99 100644
--- a/arch/arm/mach-s3c/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c/mach-crag6410-module.c
@@ -32,9 +32,18 @@
 
 #include "crag6410.h"
 
+static struct gpiod_lookup_table wm0010_gpiod_table = {
+	.dev_id = "spi0.0", /* SPI device name */
+	.table = {
+		/* Active high for Glenfarclas Rev 2 */
+		GPIO_LOOKUP("GPION", 6,
+			    "reset", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm0010_pdata wm0010_pdata = {
-	.gpio_reset = S3C64XX_GPN(6),
-	.reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
+	/* Intentionally left blank */
 };
 
 static struct spi_board_info wm1253_devs[] = {
@@ -61,10 +70,19 @@ static struct spi_board_info balblair_devs[] = {
 	},
 };
 
+static struct gpiod_lookup_table wm5100_gpiod_table = {
+	.dev_id = "1-001a", /* Device 001a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("wm5100", 3,
+			    "hp-pol", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm5100_pdata wm5100_pdata = {
-	.ldo_ena = S3C64XX_GPN(7),
 	.irq_flags = IRQF_TRIGGER_HIGH,
-	.gpio_base = CODEC_GPIO_BASE,
 
 	.in_mode = {
 		WM5100_IN_DIFF,
@@ -73,7 +91,6 @@ static struct wm5100_pdata wm5100_pdata = {
 		WM5100_IN_SE,
 	},
 
-	.hp_pol = CODEC_GPIO_BASE + 3,
 	.jack_modes = {
 		{ WM5100_MICDET_MICBIAS3, 0, 0 },
 		{ WM5100_MICDET_MICBIAS2, 1, 1 },
@@ -110,9 +127,16 @@ static struct wm8996_retune_mobile_config wm8996_retune[] = {
 	},
 };
 
+static struct gpiod_lookup_table wm8996_gpiod_table = {
+	.dev_id = "1-001a", /* Device 001a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm8996_pdata wm8996_pdata __initdata = {
-	.ldo_ena = S3C64XX_GPN(7),
-	.gpio_base = CODEC_GPIO_BASE,
 	.micdet_def = 1,
 	.inl_mode = WM8996_DIFFERRENTIAL_1,
 	.inr_mode = WM8996_DIFFERRENTIAL_1,
@@ -296,12 +320,20 @@ static const struct i2c_board_info wm6230_i2c_devs[] = {
 };
 
 static struct wm2200_pdata wm2200_pdata = {
-	.ldo_ena = S3C64XX_GPN(7),
 	.gpio_defaults = {
 		[2] = 0x0005,  /* GPIO3 24.576MHz output clock */
 	},
 };
 
+static struct gpiod_lookup_table wm2200_gpiod_table = {
+	.dev_id = "1-003a", /* Device 003a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static const struct i2c_board_info wm2200_i2c[] = {
 	{ I2C_BOARD_INFO("wm2200", 0x3a),
 	  .platform_data = &wm2200_pdata, },
@@ -337,18 +369,21 @@ static const struct {
 	{ .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" },
 	{ .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" },
 	{ .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin",
-	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
+	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs),
+	  .gpiod_table = &wm0010_gpiod_table },
 	{ .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" },
 	{ .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" },
 	{ .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair",
 	  .spi_devs = balblair_devs,
 	  .num_spi_devs = ARRAY_SIZE(balblair_devs) },
 	{ .id = 0x39, .rev = 0xff, .name = "1254-EV1 Dallas Dhu",
-	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs),
+	  .gpiod_table = &wm8996_gpiod_table },
 	{ .id = 0x3a, .rev = 0xff, .name = "1259-EV1 Tobermory",
 	  .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
 	{ .id = 0x3b, .rev = 0xff, .name = "1255-EV1 Kilchoman",
-	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
+	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs),
+	  .gpiod_table = &wm5100_gpiod_table },
 	{ .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" },
 	{ .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill",
 	  .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs),
@@ -362,7 +397,8 @@ static const struct {
 	  .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs),
 	  .gpiod_table = &wm5102_gpiod_table },
 	{ .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1",
-	  .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
+	  .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c),
+	  .gpiod_table = &wm2200_gpiod_table },
 };
 
 static int wlf_gf_module_probe(struct i2c_client *i2c)
diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
index 7c4bed4370a1..e5df2cb51ab2 100644
--- a/arch/arm/mach-s3c/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -39,8 +39,6 @@
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
 
-#include <sound/wm1250-ev1.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
@@ -713,13 +711,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata = {
 	.disable_touch = true,
 };
 
-static struct wm1250_ev1_pdata wm1250_ev1_pdata = {
-	.gpios = {
-		[WM1250_EV1_GPIO_CLK_ENA] = S3C64XX_GPN(12),
-		[WM1250_EV1_GPIO_CLK_SEL0] = S3C64XX_GPL(12),
-		[WM1250_EV1_GPIO_CLK_SEL1] = S3C64XX_GPL(13),
-		[WM1250_EV1_GPIO_OSR] = S3C64XX_GPL(14),
-		[WM1250_EV1_GPIO_MASTER] = S3C64XX_GPL(8),
+static struct gpiod_lookup_table crag_wm1250_ev1_gpiod_table = {
+	/* The WM1250-EV1 is device 0027 on I2C bus 1 */
+	.dev_id = "1-0027",
+	.table = {
+		GPIO_LOOKUP("GPION", 12, "clk-ena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 12, "clk-sel0", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 13, "clk-sel1", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 14, "osr", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 8, "master", GPIO_ACTIVE_HIGH),
+		{ },
 	},
 };
 
@@ -733,9 +734,7 @@ static struct i2c_board_info i2c_devs1[] = {
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x24) },
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x25) },
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x26) },
-
-	{ I2C_BOARD_INFO("wm1250-ev1", 0x27),
-	  .platform_data = &wm1250_ev1_pdata },
+	{ I2C_BOARD_INFO("wm1250-ev1", 0x27), },
 };
 
 static struct s3c2410_platform_i2c i2c1_pdata = {
@@ -862,6 +861,7 @@ static void __init crag6410_machine_init(void)
 
 	gpiod_add_lookup_table(&crag_pmic_gpiod_table);
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	gpiod_add_lookup_table(&crag_wm1250_ev1_gpiod_table);
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
 	samsung_keypad_set_platdata(&crag6410_keypad_data);
diff --git a/arch/arm/mach-sunplus/Kconfig b/arch/arm/mach-sunplus/Kconfig
deleted file mode 100644
index d0c2416e6f24..000000000000
--- a/arch/arm/mach-sunplus/Kconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-
-menuconfig ARCH_SUNPLUS
-	bool "Sunplus SoCs"
-	depends on ARCH_MULTI_V7
-	help
-	  Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
-	  such as the Banana Pi BPI-F2S development board (and derivatives).
-	  (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
-	  (<https://tibbo.com/store/plus1.html>)
-
-config SOC_SP7021
-	bool "Sunplus SP7021 SoC support"
-	depends on ARCH_SUNPLUS
-	default ARCH_SUNPLUS
-	select HAVE_ARM_ARCH_TIMER
-	select ARM_GIC
-	select ARM_PSCI
-	select PINCTRL
-	select PINCTRL_SPPCTL
-	select SERIAL_SUNPLUS if TTY
-	select SERIAL_SUNPLUS_CONSOLE if TTY
-	help
-	  Support for Sunplus SP7021 SoC. It is based on ARM 4-core
-	  Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
-	  Ethernet, etc.), FPGA interface,  chip-to-chip bus.
-	  It is designed for industrial control.
diff --git a/arch/arm/mach-sunplus/Makefile b/arch/arm/mach-sunplus/Makefile
deleted file mode 100644
index d211de6af2db..000000000000
--- a/arch/arm/mach-sunplus/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-$(CONFIG_SOC_SP7021)	+= sp7021.o
diff --git a/arch/arm/mach-sunplus/sp7021.c b/arch/arm/mach-sunplus/sp7021.c
deleted file mode 100644
index 774d0a5bd4eb..000000000000
--- a/arch/arm/mach-sunplus/sp7021.c
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/*
- * Copyright (C) Sunplus Technology Co., Ltd.
- *       All rights reserved.
- */
-#include <linux/kernel.h>
-#include <asm/mach/arch.h>
-
-static const char *sp7021_compat[] __initconst = {
-	"sunplus,sp7021",
-	NULL
-};
-
-DT_MACHINE_START(SP7021_DT, "SP7021")
-	.dt_compat	= sp7021_compat,
-MACHINE_END
diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
deleted file mode 100644
index e661d2626675..000000000000
--- a/arch/arm/mach-uniphier/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config ARCH_UNIPHIER
-	bool "Socionext UniPhier SoCs"
-	depends on ARCH_MULTI_V7
-	select ARCH_HAS_RESET_CONTROLLER
-	select ARM_AMBA
-	select ARM_GLOBAL_TIMER
-	select ARM_GIC
-	select HAVE_ARM_SCU
-	select HAVE_ARM_TWD if SMP
-	select PINCTRL
-	select RESET_CONTROLLER
-	help
-	  Support for UniPhier SoC family developed by Socionext Inc.
-	  (formerly, System LSI Business Division of Panasonic Corporation)
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index b1519b4dc03a..e029270c2687 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -201,23 +201,6 @@ config REALVIEW_EB_A9MP
 	  Enable support for the Cortex-A9MPCore tile fitted to the
 	  Realview(R) Emulation Baseboard platform.
 
-config REALVIEW_EB_ARM11MP
-	bool "Support ARM11MPCore Tile"
-	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
-	select HAVE_SMP
-	help
-	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
-	  Emulation Baseboard platform.
-
-config MACH_REALVIEW_PB11MP
-	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
-	depends on ARCH_MULTI_V6
-	select HAVE_SMP
-	help
-	  Include support for the ARM(R) RealView(R) Platform Baseboard for
-	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
-	  support for PCI-E and Compact Flash.
-
 # ARMv6 CPU without K extensions, but does have the new exclusive ops
 config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
diff --git a/arch/arm/mach-versatile/platsmp-realview.c b/arch/arm/mach-versatile/platsmp-realview.c
index 5d363385c801..6965a1de727b 100644
--- a/arch/arm/mach-versatile/platsmp-realview.c
+++ b/arch/arm/mach-versatile/platsmp-realview.c
@@ -18,6 +18,11 @@
 #define REALVIEW_SYS_FLAGSSET_OFFSET	0x30
 
 static const struct of_device_id realview_scu_match[] = {
+	/*
+	 * The ARM11MP SCU compatible is only provided as fallback for
+	 * old RealView EB Cortex-A9 device trees that were using this
+	 * compatible by mistake.
+	 */
 	{ .compatible = "arm,arm11mp-scu", },
 	{ .compatible = "arm,cortex-a9-scu", },
 	{ .compatible = "arm,cortex-a5-scu", },
@@ -27,7 +32,6 @@ static const struct of_device_id realview_scu_match[] = {
 static const struct of_device_id realview_syscon_match[] = {
         { .compatible = "arm,core-module-integrator", },
         { .compatible = "arm,realview-eb-syscon", },
-        { .compatible = "arm,realview-pb11mp-syscon", },
         { .compatible = "arm,realview-pbx-syscon", },
         { },
 };
diff --git a/arch/arm/mach-versatile/realview.c b/arch/arm/mach-versatile/realview.c
index a3933e2373d5..36a6f6bc4fdd 100644
--- a/arch/arm/mach-versatile/realview.c
+++ b/arch/arm/mach-versatile/realview.c
@@ -9,7 +9,6 @@
 static const char *const realview_dt_platform_compat[] __initconst = {
 	"arm,realview-eb",
 	"arm,realview-pb1176",
-	"arm,realview-pb11mp",
 	"arm,realview-pba8",
 	"arm,realview-pbx",
 	NULL,
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c164cde50243..2b6f50dd5478 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -937,24 +937,6 @@ config VDSO
 	  You must have glibc 2.22 or later for programs to seamlessly
 	  take advantage of this.
 
-config DMA_CACHE_RWFO
-	bool "Enable read/write for ownership DMA cache maintenance"
-	depends on CPU_V6K && SMP
-	default y
-	help
-	  The Snoop Control Unit on ARM11MPCore does not detect the
-	  cache maintenance operations and the dma_{map,unmap}_area()
-	  functions may leave stale cache entries on other CPUs. By
-	  enabling this option, Read or Write For Ownership in the ARMv6
-	  DMA cache maintenance functions is performed. These LDR/STR
-	  instructions change the cache line state to shared or modified
-	  so that the cache operation has the desired effect.
-
-	  Note that the workaround is only valid on processors that do
-	  not perform speculative loads into the D-cache. For such
-	  processors, if cache maintenance operations are not broadcast
-	  in hardware, other workarounds are needed (e.g. cache
-	  maintenance broadcasting in software via FIQ).
 
 config OUTER_CACHE
 	bool
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 250c83bf7158..44211d8a296f 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -201,10 +201,6 @@ ENTRY(v6_flush_kern_dcache_area)
  *	- end     - virtual end address of region
  */
 v6_dma_inv_range:
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrb	r2, [r0]			@ read for ownership
-	strb	r2, [r0]			@ write for ownership
-#endif
 	tst	r0, #D_CACHE_LINE_SIZE - 1
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
@@ -213,10 +209,6 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r0, c7, c11, 1		@ clean unified line
 #endif
 	tst	r1, #D_CACHE_LINE_SIZE - 1
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrbne	r2, [r1, #-1]			@ read for ownership
-	strbne	r2, [r1, #-1]			@ write for ownership
-#endif
 	bic	r1, r1, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
 	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D line
@@ -231,10 +223,6 @@ v6_dma_inv_range:
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrlo	r2, [r0]			@ read for ownership
-	strlo	r2, [r0]			@ write for ownership
-#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
@@ -248,9 +236,6 @@ v6_dma_inv_range:
 v6_dma_clean_range:
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldr	r2, [r0]			@ read for ownership
-#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
 #else
@@ -269,10 +254,6 @@ v6_dma_clean_range:
  *	- end     - virtual end address of region
  */
 ENTRY(v6_dma_flush_range)
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrb	r2, [r0]		@ read for ownership
-	strb	r2, [r0]		@ write for ownership
-#endif
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
 #ifdef HARVARD_CACHE
@@ -282,10 +263,6 @@ ENTRY(v6_dma_flush_range)
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrblo	r2, [r0]			@ read for ownership
-	strblo	r2, [r0]			@ write for ownership
-#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
@@ -301,13 +278,7 @@ ENTRY(v6_dma_map_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_FROM_DEVICE
 	beq	v6_dma_inv_range
-#ifndef CONFIG_DMA_CACHE_RWFO
 	b	v6_dma_clean_range
-#else
-	teq	r2, #DMA_TO_DEVICE
-	beq	v6_dma_clean_range
-	b	v6_dma_flush_range
-#endif
 ENDPROC(v6_dma_map_area)
 
 /*
@@ -317,11 +288,9 @@ ENDPROC(v6_dma_map_area)
  *	- dir	- DMA direction
  */
 ENTRY(v6_dma_unmap_area)
-#ifndef CONFIG_DMA_CACHE_RWFO
 	add	r1, r1, r0
 	teq	r2, #DMA_TO_DEVICE
 	bne	v6_dma_inv_range
-#endif
 	ret	lr
 ENDPROC(v6_dma_unmap_area)
 
diff --git a/arch/arm/mm/dma-mapping-nommu.c b/arch/arm/mm/dma-mapping-nommu.c
index cfd9c933d2f0..b94850b57995 100644
--- a/arch/arm/mm/dma-mapping-nommu.c
+++ b/arch/arm/mm/dma-mapping-nommu.c
@@ -34,7 +34,7 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
 }
 
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			const struct iommu_ops *iommu, bool coherent)
+			bool coherent)
 {
 	if (IS_ENABLED(CONFIG_CPU_V7M)) {
 		/*
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 5409225b4abc..f68db05eba29 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -859,10 +859,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size,
 	int i = 0;
 	int order_idx = 0;
 
-	if (array_size <= PAGE_SIZE)
-		pages = kzalloc(array_size, GFP_KERNEL);
-	else
-		pages = vzalloc(array_size);
+	pages = kvzalloc(array_size, GFP_KERNEL);
 	if (!pages)
 		return NULL;
 
@@ -1713,7 +1710,7 @@ void arm_iommu_detach_device(struct device *dev)
 EXPORT_SYMBOL_GPL(arm_iommu_detach_device);
 
 static void arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
-				    const struct iommu_ops *iommu, bool coherent)
+				    bool coherent)
 {
 	struct dma_iommu_mapping *mapping;
 
@@ -1748,7 +1745,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev)
 #else
 
 static void arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
-				    const struct iommu_ops *iommu, bool coherent)
+				    bool coherent)
 {
 }
 
@@ -1757,7 +1754,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev) { }
 #endif	/* CONFIG_ARM_DMA_USE_IOMMU */
 
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			const struct iommu_ops *iommu, bool coherent)
+			bool coherent)
 {
 	/*
 	 * Due to legacy code that sets the ->dma_coherent flag from a bus
@@ -1776,8 +1773,8 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 	if (dev->dma_ops)
 		return;
 
-	if (iommu)
-		arm_setup_iommu_dma_ops(dev, dma_base, size, iommu, coherent);
+	if (device_iommu_mapped(dev))
+		arm_setup_iommu_dma_ops(dev, dma_base, size, coherent);
 
 	xen_setup_dma_ops(dev);
 	dev->archdata.dma_ops_setup = true;
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index fef62e4a9edd..07565b593ed6 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -278,6 +278,37 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
 
+	if (!(flags & FAULT_FLAG_USER))
+		goto lock_mmap;
+
+	vma = lock_vma_under_rcu(mm, addr);
+	if (!vma)
+		goto lock_mmap;
+
+	if (!(vma->vm_flags & vm_flags)) {
+		vma_end_read(vma);
+		goto lock_mmap;
+	}
+	fault = handle_mm_fault(vma, addr, flags | FAULT_FLAG_VMA_LOCK, regs);
+	if (!(fault & (VM_FAULT_RETRY | VM_FAULT_COMPLETED)))
+		vma_end_read(vma);
+
+	if (!(fault & VM_FAULT_RETRY)) {
+		count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
+		goto done;
+	}
+	count_vm_vma_lock_event(VMA_LOCK_RETRY);
+	if (fault & VM_FAULT_MAJOR)
+		flags |= FAULT_FLAG_TRIED;
+
+	/* Quick path to respond to signals */
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
+			goto no_context;
+		return 0;
+	}
+lock_mmap:
+
 retry:
 	vma = lock_mm_and_find_vma(mm, addr, regs);
 	if (unlikely(!vma)) {
@@ -316,6 +347,7 @@ retry:
 	}
 
 	mmap_read_unlock(mm);
+done:
 
 	/*
 	 * Handle the "normal" case first - VM_FAULT_MAJOR
diff --git a/arch/arm/mm/kasan_init.c b/arch/arm/mm/kasan_init.c
index 24d71b5db62d..111d4f703136 100644
--- a/arch/arm/mm/kasan_init.c
+++ b/arch/arm/mm/kasan_init.c
@@ -28,6 +28,12 @@ static pgd_t tmp_pgd_table[PTRS_PER_PGD] __initdata __aligned(PGD_SIZE);
 
 pmd_t tmp_pmd_table[PTRS_PER_PMD] __page_aligned_bss;
 
+static __init void *kasan_alloc_block_raw(size_t size)
+{
+	return memblock_alloc_try_nid_raw(size, size, __pa(MAX_DMA_ADDRESS),
+				      MEMBLOCK_ALLOC_NOLEAKTRACE, NUMA_NO_NODE);
+}
+
 static __init void *kasan_alloc_block(size_t size)
 {
 	return memblock_alloc_try_nid(size, size, __pa(MAX_DMA_ADDRESS),
@@ -50,7 +56,7 @@ static void __init kasan_pte_populate(pmd_t *pmdp, unsigned long addr,
 			if (!pte_none(READ_ONCE(*ptep)))
 				continue;
 
-			p = kasan_alloc_block(PAGE_SIZE);
+			p = kasan_alloc_block_raw(PAGE_SIZE);
 			if (!p) {
 				panic("%s failed to allocate shadow page for address 0x%lx\n",
 				      __func__, addr);
diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl
index 584f9528c996..b6c9e01e14f5 100644
--- a/arch/arm/tools/syscall.tbl
+++ b/arch/arm/tools/syscall.tbl
@@ -470,3 +470,8 @@
 454	common	futex_wake			sys_futex_wake
 455	common	futex_wait			sys_futex_wait
 456	common	futex_requeue			sys_futex_requeue
+457	common	statmount			sys_statmount
+458	common	listmount			sys_listmount
+459	common	lsm_get_self_attr		sys_lsm_get_self_attr
+460	common	lsm_set_self_attr		sys_lsm_set_self_attr
+461	common	lsm_list_modules		sys_lsm_list_modules
diff --git a/arch/arm/vdso/vgettimeofday.c b/arch/arm/vdso/vgettimeofday.c
index a003beacac76..3554aa35f1ba 100644
--- a/arch/arm/vdso/vgettimeofday.c
+++ b/arch/arm/vdso/vgettimeofday.c
@@ -8,6 +8,7 @@
 #include <linux/types.h>
 #include <asm/vdso.h>
 #include <asm/unwind.h>
+#include <vdso/gettime.h>
 
 int __vdso_clock_gettime(clockid_t clock,
 			 struct old_timespec32 *ts)
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 7e8773a2d99d..b68efe643a12 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -800,6 +800,24 @@ static struct undef_hook neon_support_hook[] = {{
 	.cpsr_mask	= PSR_T_BIT,
 	.cpsr_val	= PSR_T_BIT,
 	.fn		= vfp_support_entry,
+}, {
+	.instr_mask	= 0xff000800,
+	.instr_val	= 0xfc000800,
+	.cpsr_mask	= 0,
+	.cpsr_val	= 0,
+	.fn		= vfp_support_entry,
+}, {
+	.instr_mask	= 0xff000800,
+	.instr_val	= 0xfd000800,
+	.cpsr_mask	= 0,
+	.cpsr_val	= 0,
+	.fn		= vfp_support_entry,
+}, {
+	.instr_mask	= 0xff000800,
+	.instr_val	= 0xfe000800,
+	.cpsr_mask	= 0,
+	.cpsr_val	= 0,
+	.fn		= vfp_support_entry,
 }};
 
 static struct undef_hook vfp_support_hook = {
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 7b071a00425d..aa7c1d435139 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -36,6 +36,7 @@ config ARM64
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_DEVMAP
 	select ARCH_HAS_PTE_SPECIAL
+	select ARCH_HAS_HW_PTE_YOUNG
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SET_DIRECT_MAP
 	select ARCH_HAS_SET_MEMORY
@@ -132,6 +133,7 @@ config ARM64
 	select GENERIC_ARCH_TOPOLOGY
 	select GENERIC_CLOCKEVENTS_BROADCAST
 	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_DEVICES
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
@@ -154,7 +156,7 @@ config ARM64
 	select HAVE_MOVE_PUD
 	select HAVE_PCI
 	select HAVE_ACPI_APEI if (ACPI && EFI)
-	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
+	select HAVE_ALIGNED_STRUCT_PAGE
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_BITREVERSE
 	select HAVE_ARCH_COMPILER_H
@@ -1037,8 +1039,12 @@ config ARM64_ERRATUM_2645198
 
 	  If unsure, say Y.
 
+config ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	bool
+
 config ARM64_ERRATUM_2966298
 	bool "Cortex-A520: 2966298: workaround for speculatively executed unprivileged load"
+	select ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
 	default y
 	help
 	  This option adds the workaround for ARM Cortex-A520 erratum 2966298.
@@ -1050,6 +1056,20 @@ config ARM64_ERRATUM_2966298
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_3117295
+	bool "Cortex-A510: 3117295: workaround for speculatively executed unprivileged load"
+	select ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 3117295.
+
+	  On an affected Cortex-A510 core, a speculatively executed unprivileged
+	  load might leak data from a privileged level via a cache side channel.
+
+	  Work around this problem by executing a TLBI before returning to EL0.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
@@ -1519,15 +1539,15 @@ config XEN
 
 # include/linux/mmzone.h requires the following to be true:
 #
-#   MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
+#   MAX_PAGE_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
 #
-# so the maximum value of MAX_ORDER is SECTION_SIZE_BITS - PAGE_SHIFT:
+# so the maximum value of MAX_PAGE_ORDER is SECTION_SIZE_BITS - PAGE_SHIFT:
 #
-#     | SECTION_SIZE_BITS |  PAGE_SHIFT  |  max MAX_ORDER  |  default MAX_ORDER |
-# ----+-------------------+--------------+-----------------+--------------------+
-# 4K  |       27          |      12      |       15        |         10         |
-# 16K |       27          |      14      |       13        |         11         |
-# 64K |       29          |      16      |       13        |         13         |
+#     | SECTION_SIZE_BITS |  PAGE_SHIFT  |  max MAX_PAGE_ORDER  |  default MAX_PAGE_ORDER |
+# ----+-------------------+--------------+----------------------+-------------------------+
+# 4K  |       27          |      12      |       15             |         10              |
+# 16K |       27          |      14      |       13             |         11              |
+# 64K |       29          |      16      |       13             |         13              |
 config ARCH_FORCE_MAX_ORDER
 	int
 	default "13" if ARM64_64K_PAGES
@@ -1535,21 +1555,21 @@ config ARCH_FORCE_MAX_ORDER
 	default "10"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
 	  large blocks of physically contiguous memory is required.
 
 	  The maximal size of allocation cannot exceed the size of the
-	  section, so the value of MAX_ORDER should satisfy
+	  section, so the value of MAX_PAGE_ORDER should satisfy
 
-	    MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
+	    MAX_PAGE_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
 
 	  Don't change if unsure.
 
 config UNMAP_KERNEL_AT_EL0
-	bool "Unmap kernel when running in userspace (aka \"KAISER\")" if EXPERT
+	bool "Unmap kernel when running in userspace (KPTI)" if EXPERT
 	default y
 	help
 	  Speculation attacks against some high-performance processors can
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 9a2d3723cd0f..a88cdf910687 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -195,12 +195,12 @@ vdso_prepare: prepare0
 	include/generated/vdso-offsets.h arch/arm64/kernel/vdso/vdso.so
 ifdef CONFIG_COMPAT_VDSO
 	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 \
-	include/generated/vdso32-offsets.h arch/arm64/kernel/vdso32/vdso.so
+	arch/arm64/kernel/vdso32/vdso.so
 endif
 endif
 
 vdso-install-y				+= arch/arm64/kernel/vdso/vdso.so.dbg
-vdso-install-$(CONFIG_COMPAT_VDSO)	+= arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
+vdso-install-$(CONFIG_COMPAT_VDSO)	+= arch/arm64/kernel/vdso32/vdso32.so.dbg
 
 include $(srctree)/scripts/Makefile.defconf
 
diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile
index 1761f5972443..a5a787371117 100644
--- a/arch/arm64/boot/Makefile
+++ b/arch/arm64/boot/Makefile
@@ -44,7 +44,7 @@ EFI_ZBOOT_BFD_TARGET	:= elf64-littleaarch64
 EFI_ZBOOT_MACH_TYPE	:= ARM64
 EFI_ZBOOT_FORWARD_CFI	:= $(CONFIG_ARM64_BTI_KERNEL)
 
-EFI_ZBOOT_OBJCOPY_FLAGS	= --add-symbol zboot_code_size=0x$(shell \
+EFI_ZBOOT_OBJCOPY_FLAGS	= --add-symbol zboot_code_size=0x$$( \
 				$(NM) vmlinux|grep _kernel_codesize|cut -d' ' -f1)
 
 include $(srctree)/drivers/firmware/efi/libstub/Makefile.zboot
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 3aca6787a167..1f1f8d865d0e 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -42,4 +42,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-transpeed-8k618-t.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
new file mode 100644
index 000000000000..21ca1977055d
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "OrangePi Zero 2W";
+	compatible = "xunlong,orangepi-zero2w", "allwinner,sun50i-h618";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* SY8089 DC/DC converter */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		regulator-always-on;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/* USB 2 & 3 are on the FPC connector (or the exansion board) */
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;	/* internally via VCC-IO */
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;	/* internally via VCC-IO */
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>;	/* PC9 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL and DRAM */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&spi0  {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
new file mode 100644
index 000000000000..8ea1fd41aeba
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Transpeed 8K618-T";
+	compatible = "transpeed,8k618-t", "allwinner,sun50i-h618";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* discrete 3.3V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dldo1>;
+	cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>;	/* PI16 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-1v8-pll";
+			};
+
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-io-mmc";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1360000>;
+				regulator-max-microvolt = <1360000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_dldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 439497ab967d..072fe20cfca0 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -59,6 +59,25 @@
 		};
 	};
 
+	firmware {
+		svc {
+			compatible = "intel,stratix10-svc";
+			method = "smc";
+			memory-region = <&service_reserved>;
+
+			fpga_mgr: fpga-mgr {
+				compatible = "intel,stratix10-soc-fpga-mgr";
+			};
+		};
+	};
+
+	fpga-region {
+		compatible = "fpga-region";
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		fpga-mgr = <&fpga_mgr>;
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <0 170 4>,
@@ -125,7 +144,7 @@
 		};
 	};
 
-	soc {
+	soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -133,13 +152,6 @@
 		interrupt-parent = <&intc>;
 		ranges = <0 0 0 0xffffffff>;
 
-		base_fpga_region {
-			#address-cells = <0x2>;
-			#size-cells = <0x2>;
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-
 		clkmgr: clock-controller@ffd10000 {
 			compatible = "intel,stratix10-clkmgr";
 			reg = <0xffd10000 0x1000>;
@@ -510,6 +522,7 @@
 			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
 			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			clock-names = "otg";
 			iommus = <&smmu 7>;
 			status = "disabled";
 		};
@@ -620,18 +633,6 @@
 
 			status = "disabled";
 		};
-
-		firmware {
-			svc {
-				compatible = "intel,stratix10-svc";
-				method = "smc";
-				memory-region = <&service_reserved>;
-
-				fpga_mgr: fpga-mgr {
-					compatible = "intel,stratix10-soc-fpga-mgr";
-				};
-			};
-		};
 	};
 
 	usbphy0: usbphy0 {
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 468fcc7da066..26173f0b0051 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -51,7 +51,7 @@
 		regulator-max-microvolt = <330000>;
 	};
 
-	soc {
+	soc@0 {
 		eccmgr {
 			sdmmca-ecc@ff8c8c00 {
 				compatible = "altr,socfpga-s10-sdmmc-ecc",
@@ -66,14 +66,14 @@
 };
 
 &pinctrl0 {
-	i2c1_pmx_func: i2c1-pmx-func {
+	i2c1_pmx_func: i2c1-pmx-func-pins {
 		pinctrl-single,pins = <
 			0x78   0x4   /* I2C1_SDA (IO6-B) PIN30SEL) */
 			0x7c   0x4   /* I2C1_SCL (IO7-B) PIN31SEL */
 		>;
 	};
 
-	i2c1_pmx_func_gpio: i2c1-pmx-func-gpio {
+	i2c1_pmx_func_gpio: i2c1-pmx-func-gpio-pins {
 		pinctrl-single,pins = <
 			0x78   0x8   /* I2C1_SDA (IO6-B) PIN30SEL) */
 			0x7c   0x8   /* I2C1_SCL (IO7-B) PIN31SEL */
@@ -187,8 +187,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <1>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
index 532164a6354c..81d0e914a77c 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -51,7 +51,7 @@
 		regulator-max-microvolt = <330000>;
 	};
 
-	soc {
+	soc@0 {
 		eccmgr {
 			sdmmca-ecc@ff8c8c00 {
 				compatible = "altr,socfpga-s10-sdmmc-ecc",
@@ -102,7 +102,7 @@
 &nand {
 	status = "okay";
 
-	flash@0 {
+	nand@0 {
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -176,8 +176,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <1>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
index ff413f8e3b07..0d837d3e65a5 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
@@ -80,8 +80,6 @@
 
 &mmc {
 	status = "okay";
-	altr,dw-mshc-ciu-div = <0x3>;
-	altr,dw-mshc-sdr-timing = <0x0 0x3>;
 	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	broken-cd;
diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index dccbba6e7f98..dbf2dce8d1d6 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -145,7 +145,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <160>;
 			al,msi-num-spis = <160>;
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
index 39481d7fd7d4..3ea178acdddf 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -355,7 +355,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <336>;
 			al,msi-num-spis = <959>;
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index 998f5050795c..2ad1f8eef199 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -81,6 +81,12 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			watchdog@2100 {
+				compatible = "amlogic,c3-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			periphs_pinctrl: pinctrl@4000 {
 				compatible = "amlogic,c3-periphs-pinctrl";
 				#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
index 0062667c4f65..8a18ce948450 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
@@ -30,8 +30,20 @@
 &uart_B {
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&i2c_AO {
+	/* EEPROM on base board */
+	eeprompd: eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <0x20>;
+		label = "eeprompd";
+		address-width = <0x10>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
index c2d22b00c1cd..c356bd2cc63a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
@@ -25,3 +25,15 @@
 &sd_emmc_b {
 	broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
 };
+
+&i2c_AO {
+	/* EEPROM on base board */
+	eeprompd: eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <0x20>;
+		label = "eeprompd";
+		address-width = <0x10>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index df16eead2c80..c8905663bc75 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -66,7 +66,6 @@
 		VDDA-supply = <&vcc_3v3>;
 		VDDP-supply = <&vcc_3v3>;
 		VDDD-supply = <&vcc_3v3>;
-		status = "okay";
 		sound-name-prefix = "Linein";
 	};
 
@@ -75,14 +74,12 @@
 		compatible = "everest,es7154";
 		VDD-supply = <&vcc_3v3>;
 		PVDD-supply = <&vcc_5v>;
-		status = "okay";
 		sound-name-prefix = "Lineout";
 	};
 
 	spdif_dit: audio-codec-2 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -91,14 +88,12 @@
 		compatible = "dmic-codec";
 		num-channels = <7>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
 	spdif_dir: audio-codec-4 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dir";
-		status = "okay";
 		sound-name-prefix = "DIR";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index a49aa62e3f9f..7e5ac9db93f8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -432,6 +432,27 @@
 					};
 				};
 
+				nand_all_pins: nand-all-pins {
+					mux {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "nand_ce0",
+							 "nand_ale",
+							 "nand_cle",
+							 "nand_wen_clk",
+							 "nand_ren_wr";
+						function = "nand";
+						input-enable;
+						bias-pull-up;
+					};
+				};
+
 				emmc_ds_pins: emmc_ds {
 					mux {
 						groups = "emmc_ds";
@@ -1913,6 +1934,8 @@
 				reg = <0x0 0x7800 0x0 0x100>,
 				      <0x0 0x7000 0x0 0x800>;
 				reg-names = "nfc", "emmc";
+				pinctrl-0 = <&nand_all_pins>;
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 0ad0c2b7dfef..4c4550dd4711 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -45,7 +45,6 @@
 		compatible = "dmic-codec";
 		num-channels = <2>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 4969a76460fa..9b55982b6a6b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -22,7 +22,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
index 995ce10d5c81..08c33ec7e9f1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -369,7 +369,7 @@
 
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
index 0a6a12808568..4b8db872bbf3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -487,7 +487,7 @@
 
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
index 8fc2e143cb54..0da386cabe1a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
@@ -22,7 +22,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index ce548b373296..6396f190d703 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -17,7 +17,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 18f7b730289e..e59c3c92b1e7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -26,7 +26,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index e238f1f10124..f28452b9f00f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -18,7 +18,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
index 292c718ee19c..591455c50e88 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -18,7 +18,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index e8303089bff6..74df32534231 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -21,7 +21,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index e1b74b174915..376760d86766 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -17,7 +17,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 7d525bdb0e06..ad2dd4ad0a31 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -28,7 +28,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 50d49aec41bd..d05dde8da5c5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -37,7 +37,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
index c1f322c73982..983caddc409c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -15,7 +15,7 @@
 	#size-cells = <2>;
 
 	aliases {
-		serial0 = &uart_B;
+		serial0 = &uart_b;
 	};
 
 	memory@0 {
@@ -23,9 +23,20 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 52 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x3400000>;
+			no-map;
+		};
+	};
 };
 
-&uart_B {
+&uart_b {
 	status = "okay";
 };
 
@@ -34,3 +45,48 @@
 	pinctrl-0 = <&remote_pins>;
 	pinctrl-names = "default";
 };
+
+&nand {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-on-flash-bbt;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x00200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "system";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "media";
+			reg = <0x04000000 0x8000000>;
+		};
+	};
+};
+
+&spicc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spicc0_pins_x>;
+	cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index e0cfc54ebccb..ce90b35686a2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -6,6 +6,10 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-s4-gpio.h>
+#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
+#include <dt-bindings/power/meson-s4-power.h>
 
 / {
 	cpus {
@@ -92,6 +96,44 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			clkc_periphs: clock-controller@0 {
+				compatible = "amlogic,s4-peripherals-clkc";
+				reg = <0x0 0x0 0x0 0x49c>;
+				clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+					<&clkc_pll CLKID_FCLK_DIV2P5>,
+					<&clkc_pll CLKID_FCLK_DIV3>,
+					<&clkc_pll CLKID_FCLK_DIV4>,
+					<&clkc_pll CLKID_FCLK_DIV5>,
+					<&clkc_pll CLKID_FCLK_DIV7>,
+					<&clkc_pll CLKID_HIFI_PLL>,
+					<&clkc_pll CLKID_GP0_PLL>,
+					<&clkc_pll CLKID_MPLL0>,
+					<&clkc_pll CLKID_MPLL1>,
+					<&clkc_pll CLKID_MPLL2>,
+					<&clkc_pll CLKID_MPLL3>,
+					<&clkc_pll CLKID_HDMI_PLL>,
+					<&xtal>;
+				clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3",
+						"fclk_div4", "fclk_div5", "fclk_div7",
+						"hifi_pll", "gp0_pll", "mpll0", "mpll1",
+						"mpll2", "mpll3", "hdmi_pll", "xtal";
+				#clock-cells = <1>;
+			};
+
+			clkc_pll: clock-controller@8000 {
+				compatible = "amlogic,s4-pll-clkc";
+				reg = <0x0 0x8000 0x0 0x1e8>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				#clock-cells = <1>;
+			};
+
+			watchdog@2100 {
+				compatible = "amlogic,s4-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			periphs_pinctrl: pinctrl@4000 {
 				compatible = "amlogic,meson-s4-periphs-pinctrl";
 				#address-cells = <2>;
@@ -114,6 +156,187 @@
 						bias-disable;
 					};
 				};
+
+				i2c0_pins1: i2c0-pins1 {
+					mux {
+						groups = "i2c0_sda",
+						       "i2c0_scl";
+						function = "i2c0";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins1: i2c1-pins1 {
+					mux {
+						groups = "i2c1_sda_c",
+						       "i2c1_scl_c";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins2: i2c1-pins2 {
+					mux {
+						groups = "i2c1_sda_d",
+						       "i2c1_scl_d";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins3: i2c1-pins3 {
+					mux {
+						groups = "i2c1_sda_h",
+						       "i2c1_scl_h";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins4: i2c1-pins4 {
+					mux {
+						groups = "i2c1_sda_x",
+						       "i2c1_scl_x";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins1: i2c2-pins1 {
+					mux {
+						groups = "i2c2_sda_d",
+						       "i2c2_scl_d";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins2: i2c2-pins2 {
+					mux {
+						groups = "i2c2_sda_h8",
+						       "i2c2_scl_h9";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins3: i2c2-pins3 {
+					mux {
+						groups = "i2c2_sda_h0",
+						       "i2c2_scl_h1";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c3_pins1: i2c3-pins1 {
+					mux {
+						groups = "i2c3_sda_x",
+						       "i2c3_scl_x";
+						function = "i2c3";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c3_pins2: i2c3-pins2 {
+					mux {
+						groups = "i2c3_sda_z",
+						       "i2c3_scl_z";
+						function = "i2c3";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins1: i2c4-pins1 {
+					mux {
+						groups = "i2c4_sda_c",
+						       "i2c4_scl_c";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins2: i2c4-pins2 {
+					mux {
+						groups = "i2c4_sda_d",
+						       "i2c4_scl_d";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins3: i2c4-pins3 {
+					mux {
+						groups = "i2c4_sda_z",
+						       "i2c4_scl_z";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				nand_pins: nand-pins {
+					mux {
+						groups = "emmc_nand_d0",
+						       "emmc_nand_d1",
+						       "emmc_nand_d2",
+						       "emmc_nand_d3",
+						       "emmc_nand_d4",
+						       "emmc_nand_d5",
+						       "emmc_nand_d6",
+						       "emmc_nand_d7",
+						       "nand_ce0",
+						       "nand_ale",
+						       "nand_cle",
+						       "nand_wen_clk",
+						       "nand_ren_wr";
+						function = "nand";
+						input-enable;
+					};
+				};
+
+				spicc0_pins_x: spicc0-pins_x {
+					mux {
+						groups = "spi_a_mosi_x",
+						       "spi_a_miso_x",
+						       "spi_a_clk_x";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins_h: spicc0-pins-h {
+					mux {
+						groups = "spi_a_mosi_h",
+						       "spi_a_miso_h",
+						       "spi_a_clk_h";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins_z: spicc0-pins-z {
+					mux {
+						groups = "spi_a_mosi_z",
+						       "spi_a_miso_z",
+						       "spi_a_clk_z";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
 			};
 
 			gpio_intc: interrupt-controller@4080 {
@@ -126,14 +349,120 @@
 					<10 11 12 13 14 15 16 17 18 19 20 21>;
 			};
 
-			uart_B: serial@7a000 {
+			eth_phy: mdio-multiplexer@28000 {
+				compatible = "amlogic,g12a-mdio-mux";
+				reg = <0x0 0x28000 0x0 0xa4>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_ETHPHY>,
+					 <&xtal>,
+					 <&clkc_pll CLKID_MPLL_50M>;
+				clock-names = "pclk", "clkin0", "clkin1";
+				mdio-parent-bus = <&mdio0>;
+
+				ext_mdio: mdio@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				int_mdio: mdio@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					internal_ephy: ethernet-phy@8 {
+						compatible = "ethernet-phy-id0180.3301",
+							     "ethernet-phy-ieee802.3-c22";
+						interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+						reg = <8>;
+						max-speed = <100>;
+					};
+				};
+			};
+
+			spicc0: spi@50000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x50000 0x0 0x44>;
+				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SPICC0>,
+					 <&clkc_periphs CLKID_SPICC0_EN>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@66000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x66000 0x0 0x20>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_A>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@68000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x68000 0x0 0x20>;
+				interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_B>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@6a000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6a000 0x0 0x20>;
+				interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@6c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6c000 0x0 0x20>;
+				interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_D>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@6e000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6e000 0x0 0x20>;
+				interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_E>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			nand: nand-controller@8c800 {
+				compatible = "amlogic,meson-axg-nfc";
+				reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>;
+				reg-names = "nfc", "emmc";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_SD_EMMC_C>,
+					<&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core", "device";
+				status = "disabled";
+			};
+
+			uart_b: serial@7a000 {
 				compatible = "amlogic,meson-s4-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x7a000 0x0 0x18>;
 				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clocks = <&xtal>, <&clkc_periphs CLKID_UART_B>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
 			};
 
 			reset: reset-controller@2000 {
@@ -154,5 +483,30 @@
 				reg = <0x0 0x440788 0x0 0x0c>;
 			};
 		};
+
+		ethmac: ethernet@fdc00000 {
+			compatible = "amlogic,meson-axg-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xfdc00000 0x0 0x10000>,
+			      <0x0 0xfe024000 0x0 0x8>;
+
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			power-domains = <&pwrc PWRC_S4_ETH_ID>;
+			clocks = <&clkc_periphs CLKID_ETH>,
+				 <&clkc_pll CLKID_FCLK_DIV2>,
+				 <&clkc_pll CLKID_MPLL2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 095579c55f18..109932068dbe 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -32,7 +32,6 @@
 		compatible = "dmic-codec";
 		num-channels = <2>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 8b4d280b1e7e..b897f5542c0a 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -747,7 +747,7 @@
 	};
 
 	thermal-zones {
-		pmic {
+		pmic-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 0>;
@@ -760,7 +760,7 @@
 			};
 		};
 
-		soc {
+		soc-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 3>;
@@ -773,28 +773,28 @@
 			};
 		};
 
-		big_cluster_thermal_zone: big-cluster {
+		big_cluster_thermal_zone: big-cluster-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 21>;
 			status = "disabled";
 		};
 
-		little_cluster_thermal_zone: little-cluster {
+		little_cluster_thermal_zone: little-cluster-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 22>;
 			status = "disabled";
 		};
 
-		gpu0_thermal_zone: gpu0 {
+		gpu0_thermal_zone: gpu0-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 23>;
 			status = "disabled";
 		};
 
-		gpu1_thermal_zone: gpu1 {
+		gpu1_thermal_zone: gpu1-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 24>;
diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
index ec85cd2c733c..31929e2377d8 100644
--- a/arch/arm64/boot/dts/arm/juno-scmi.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
@@ -76,27 +76,27 @@
 	};
 
 	thermal-zones {
-		pmic {
+		pmic-thermal {
 			thermal-sensors = <&scmi_sensors0 0>;
 		};
 
-		soc {
+		soc-thermal {
 			thermal-sensors = <&scmi_sensors0 3>;
 		};
 
-		big-cluster {
+		big-cluster-thermal {
 			thermal-sensors = <&scmi_sensors0 21>;
 		};
 
-		little-cluster {
+		little-cluster-thermal {
 			thermal-sensors = <&scmi_sensors0 22>;
 		};
 
-		gpu0 {
+		gpu0-thermal {
 			thermal-sensors = <&scmi_sensors0 23>;
 		};
 
-		gpu1 {
+		gpu1-thermal {
 			thermal-sensors = <&scmi_sensors0 24>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 9dcd25ec2c04..896d1f33b5b6 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -586,6 +586,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index f049687d6b96..d8516ec0dae7 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -450,6 +450,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinmux 0 0 16>,
 					<&pinmux 16 71 2>,
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 6e4ba69268e5..d7f2191c2cdb 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -1,8 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
+subdir-y += google
+
 dtb-$(CONFIG_ARCH_EXYNOS) += \
 	exynos5433-tm2.dtb		\
 	exynos5433-tm2e.dtb		\
 	exynos7-espresso.dtb		\
 	exynos7885-jackpotlte.dtb	\
 	exynos850-e850-96.dtb		\
-	exynosautov9-sadk.dtb
+	exynosautov9-sadk.dtb		\
+	exynosautov920-sadk.dtb
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 91ae0462a706..7fbbec04bff0 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -361,7 +361,8 @@
 		ranges = <0x0 0x0 0x0 0x18000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
+			compatible = "samsung,exynos5433-chipid",
+				     "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
@@ -850,7 +851,8 @@
 			reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos7-wakeup-eint";
+				compatible = "samsung,exynos5433-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1546,7 +1548,7 @@
 		};
 
 		adc: adc@14d10000 {
-			compatible = "samsung,exynos7-adc";
+			compatible = "samsung,exynos5433-adc", "samsung,exynos7-adc";
 			reg = <0x14d10000 0x100>;
 			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc";
@@ -1556,7 +1558,7 @@
 		};
 
 		i2s1: i2s@14d60000 {
-			compatible = "samsung,exynos7-i2s";
+			compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s";
 			reg = <0x14d60000 0x100>;
 			dmas = <&pdma0 31>, <&pdma0 30>;
 			dma-names = "tx", "rx";
@@ -1571,7 +1573,7 @@
 		};
 
 		pwm: pwm@14dd0000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "samsung,exynos5433-pwm", "samsung,exynos4210-pwm";
 			reg = <0x14dd0000 0x100>;
 			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
@@ -1586,7 +1588,8 @@
 		};
 
 		hsi2c_0: i2c@14e40000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e40000 0x1000>;
 			interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1599,7 +1602,8 @@
 		};
 
 		hsi2c_1: i2c@14e50000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e50000 0x1000>;
 			interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1612,7 +1616,8 @@
 		};
 
 		hsi2c_2: i2c@14e60000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e60000 0x1000>;
 			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1625,7 +1630,8 @@
 		};
 
 		hsi2c_3: i2c@14e70000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e70000 0x1000>;
 			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1638,7 +1644,8 @@
 		};
 
 		hsi2c_4: i2c@14ec0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ec0000 0x1000>;
 			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1651,7 +1658,8 @@
 		};
 
 		hsi2c_5: i2c@14ed0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ed0000 0x1000>;
 			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1664,7 +1672,8 @@
 		};
 
 		hsi2c_6: i2c@14ee0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ee0000 0x1000>;
 			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1677,7 +1686,8 @@
 		};
 
 		hsi2c_7: i2c@14ef0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ef0000 0x1000>;
 			interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1690,7 +1700,8 @@
 		};
 
 		hsi2c_8: i2c@14d90000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14d90000 0x1000>;
 			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1703,7 +1714,8 @@
 		};
 
 		hsi2c_9: i2c@14da0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14da0000 0x1000>;
 			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1716,7 +1728,8 @@
 		};
 
 		hsi2c_10: i2c@14de0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14de0000 0x1000>;
 			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1729,7 +1742,8 @@
 		};
 
 		hsi2c_11: i2c@14df0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14df0000 0x1000>;
 			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1820,7 +1834,8 @@
 		};
 
 		mshc_0: mmc@15540000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1833,7 +1848,8 @@
 		};
 
 		mshc_1: mmc@15550000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1846,7 +1862,8 @@
 		};
 
 		mshc_2: mmc@15560000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1897,7 +1914,8 @@
 			};
 
 			i2s0: i2s@11440000 {
-				compatible = "samsung,exynos7-i2s";
+				compatible = "samsung,exynos5433-i2s",
+					     "samsung,exynos7-i2s";
 				reg = <0x11440000 0x100>;
 				dmas = <&adma 0>, <&adma 2>;
 				dma-names = "tx", "rx";
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 6ed80ddf3369..9cb6bd61262e 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -128,7 +128,8 @@
 		ranges = <0 0 0 0x18000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
+			compatible = "samsung,exynos7-chipid",
+				     "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
@@ -279,7 +280,7 @@
 		};
 
 		serial_0: serial@13630000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x13630000 0x100>;
 			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric0 PCLK_UART0>,
@@ -289,7 +290,7 @@
 		};
 
 		serial_1: serial@14c20000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c20000 0x100>;
 			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART1>,
@@ -299,7 +300,7 @@
 		};
 
 		serial_2: serial@14c30000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c30000 0x100>;
 			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART2>,
@@ -309,7 +310,7 @@
 		};
 
 		serial_3: serial@14c40000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c40000 0x100>;
 			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART3>,
@@ -539,7 +540,7 @@
 		};
 
 		rtc: rtc@10590000 {
-			compatible = "samsung,s3c6410-rtc";
+			compatible = "samsung,exynos7-rtc", "samsung,s3c6410-rtc";
 			reg = <0x10590000 0x100>;
 			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +560,8 @@
 		};
 
 		gpu: gpu@14ac0000 {
-			compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+			compatible = "samsung,exynos7-mali",
+				     "samsung,exynos5433-mali", "arm,mali-t760";
 			reg = <0x14ac0000 0x5000>;
 			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
@@ -619,7 +621,7 @@
 		};
 
 		pwm: pwm@136c0000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "samsung,exynos7-pwm", "samsung,exynos4210-pwm";
 			reg = <0x136c0000 0x100>;
 			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
index d69fc2392bd0..008228fb319a 100644
--- a/arch/arm64/boot/dts/exynos/exynos7885.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
@@ -172,7 +172,8 @@
 		ranges = <0x0 0x0 0x0 0x20000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos850-chipid";
+			compatible = "samsung,exynos7885-chipid",
+				     "samsung,exynos850-chipid";
 			reg = <0x10000000 0x24>;
 		};
 
@@ -264,7 +265,8 @@
 			reg = <0x11cb0000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos7-wakeup-eint";
+				compatible = "samsung,exynos7885-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
 			};
@@ -289,12 +291,14 @@
 		};
 
 		pmu_system_controller: system-controller@11c80000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "samsung,exynos7885-pmu",
+				     "samsung,exynos7-pmu", "syscon";
 			reg = <0x11c80000 0x10000>;
 		};
 
 		mmc_0: mmc@13500000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos7885-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			reg = <0x13500000 0x2000>;
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -307,7 +311,8 @@
 		};
 
 		serial_0: serial@13800000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13800000 0x100>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -320,7 +325,8 @@
 		};
 
 		serial_1: serial@13810000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13810000 0x100>;
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -333,7 +339,8 @@
 		};
 
 		serial_2: serial@13820000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13820000 0x100>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -346,7 +353,8 @@
 		};
 
 		i2c_0: i2c@13830000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13830000 0x100>;
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -359,7 +367,8 @@
 		};
 
 		i2c_1: i2c@13840000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13840000 0x100>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -372,7 +381,8 @@
 		};
 
 		i2c_2: i2c@13850000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13850000 0x100>;
 			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -385,7 +395,8 @@
 		};
 
 		i2c_3: i2c@13860000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
 			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -398,7 +409,8 @@
 		};
 
 		i2c_4: i2c@13870000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -411,7 +423,8 @@
 		};
 
 		i2c_5: i2c@13880000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
 			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -424,7 +437,8 @@
 		};
 
 		i2c_6: i2c@13890000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
 			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -437,7 +451,8 @@
 		};
 
 		i2c_7: i2c@11cd0000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x11cd0000 0x100>;
 			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
index 53104e65b9c6..da3f4a791e68 100644
--- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -359,7 +359,8 @@
 			reg = <0x11850000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos850-wakeup-eint";
+				compatible = "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -368,7 +369,8 @@
 			reg = <0x11c30000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos850-wakeup-eint";
+				compatible = "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -396,7 +398,7 @@
 		};
 
 		rtc: rtc@11a30000 {
-			compatible = "samsung,s3c6410-rtc";
+			compatible = "samsung,exynos850-rtc", "samsung,s3c6410-rtc";
 			reg = <0x11a30000 0x100>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -406,7 +408,8 @@
 		};
 
 		mmc_0: mmc@12100000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos850-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			reg = <0x12100000 0x2000>;
 			interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -419,7 +422,7 @@
 		};
 
 		i2c_0: i2c@13830000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13830000 0x100>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -432,7 +435,7 @@
 		};
 
 		i2c_1: i2c@13840000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13840000 0x100>;
 			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -445,7 +448,7 @@
 		};
 
 		i2c_2: i2c@13850000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13850000 0x100>;
 			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -458,7 +461,7 @@
 		};
 
 		i2c_3: i2c@13860000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
 			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -471,7 +474,7 @@
 		};
 
 		i2c_4: i2c@13870000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
 			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -485,7 +488,7 @@
 
 		/* I2C_5 (also called CAM_PMIC_I2C in TRM) */
 		i2c_5: i2c@13880000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
 			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -499,7 +502,7 @@
 
 		/* I2C_6 (also called MOTOR_I2C in TRM) */
 		i2c_6: i2c@13890000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
 			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -640,7 +643,8 @@
 			status = "disabled";
 
 			hsi2c_0: i2c@138a0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138a0000 0xc0>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -668,7 +672,8 @@
 			status = "disabled";
 
 			hsi2c_1: i2c@138b0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138b0000 0xc0>;
 				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -696,7 +701,8 @@
 			status = "disabled";
 
 			hsi2c_2: i2c@138c0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138c0000 0xc0>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -738,7 +744,8 @@
 			status = "disabled";
 
 			hsi2c_3: i2c@11d00000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x11d00000 0xc0>;
 				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -778,7 +785,8 @@
 			status = "disabled";
 
 			hsi2c_4: i2c@11d20000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x11d20000 0xc0>;
 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
index bc1815f6ada2..de2c1de51a76 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "exynosautov9.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Samsung ExynosAuto v9 SADK board";
@@ -32,6 +33,31 @@
 		      <0xa 0x00000000 0x2 0x00000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_wakeup &key_volup &key_voldown>;
+
+		key-wakeup {
+			label = "Wakeup";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpg2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpg1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	ufs_0_fixed_vcc_reg: regulator-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "ufs-vcc";
@@ -49,6 +75,31 @@
 	};
 };
 
+&pinctrl_alive {
+	key_wakeup: key-wakeup-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_peric1 {
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpg2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpg1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm_tout3>;
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index b228cd7e351e..c871a2f49fda 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -166,7 +166,8 @@
 		ranges = <0x0 0x0 0x0 0x20000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos850-chipid";
+			compatible = "samsung,exynosautov9-chipid",
+				     "samsung,exynos850-chipid";
 			reg = <0x10000000 0x24>;
 		};
 
@@ -309,7 +310,9 @@
 			reg = <0x10450000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynosautov9-wakeup-eint";
+				compatible = "samsung,exynosautov9-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -349,7 +352,8 @@
 		};
 
 		pmu_system_controller: system-controller@10460000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "samsung,exynosautov9-pmu",
+				     "samsung,exynos7-pmu", "syscon";
 			reg = <0x10460000 0x10000>;
 
 			reboot: syscon-reboot {
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
new file mode 100644
index 000000000000..663e8265cbf5
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
@@ -0,0 +1,1266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb6: gpb6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi0 {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gph8: gph8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph4: gph4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph5: gph5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph6: gph6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi2ufs {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	ufs_refclk_out_1: ufs-refclk-out-1-pins {
+		samsung,pins = "gph2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	ufs_rst_n_1: ufs-rst-n-1-pins {
+		samsung,pins = "gph2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg5: gpg5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* PWM PERIC0 */
+	pwm_tout0: pwm-tout0-pins {
+		samsung,pins = "gpg0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout1: pwm-tout1-pins {
+		samsung,pins = "gpg0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout2: pwm-tout2-pins {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout3: pwm-tout3-pins {
+		samsung,pins = "gpg0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI00 */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart0_bus_dual: uart0-bus-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI01 */
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus_dual: uart1-bus-dual-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI02 */
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI03 */
+	uart3_bus: uart3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI04 */
+	uart4_bus: uart4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI05 */
+	uart5_bus: uart5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI06 */
+	uart6_bus: uart6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI07 */
+	uart7_bus: uart7-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI08 */
+	uart8_bus: uart8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI00  */
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI00_I2C */
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI01 */
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI01_I2C */
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI02 */
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI02_I2C */
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI03 */
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI03_I2C */
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI04 */
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI04_I2C */
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI05 */
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI05_I2C */
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI06 */
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI06_I2C */
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI07 */
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI07_I2C */
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI08 */
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI08_I2C */
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI00 */
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI01 */
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI02 */
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI03 */
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI04 */
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI05 */
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI06 */
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI07 */
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI08 */
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I3C PERIC0 */
+	i3c0_bus: i3c0-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c1_bus: i3c1-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c2_bus: i3c2-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c3_bus: i3c3-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp12: gpp12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* UART PERIC1 USI09 */
+	uart9_bus: uart9-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI10 */
+	uart10_bus: uart10-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI11 */
+	uart11_bus: uart11-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1_USI12 */
+	uart12_bus: uart12-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1_USI13 */
+	uart13_bus: uart13-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI14 */
+	uart14_bus: uart14-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI15 */
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI16 */
+	uart16_bus: uart16-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_dual: uart16-bus-dual-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI17 */
+	uart17_bus: uart17-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2", "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_dual: uart17-bus-dual-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI09 */
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI09_I2C */
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI10 */
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI10_I2C */
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI11 */
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI11_I2C */
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI12 */
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI12_I2C */
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI13 */
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI13_I2C */
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI14 */
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI14_I2C */
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI15 */
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI15_I2C */
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI16 */
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI16_I2C */
+	hsi2c33_bus: hsi2c33-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI17 */
+	hsi2c34_bus: hsi2c34-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI17_I2C */
+	hsi2c35_bus: hsi2c35-bus-pins {
+		samsung,pins = "gpp12-2", "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI09 */
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI10 */
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI11 */
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI12 */
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI13 */
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI14 */
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI15 */
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi15_cs_func: spi15-cs-func-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI16 */
+	spi16_bus: spi16-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs: spi16-cs-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs_func: spi16-cs-func-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI17 */
+	spi17_bus: spi17-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_cs: spi17-cs-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_cs_func: spi17-cs-func-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I3C PERIC1 */
+	i3c4_bus: i3c4-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c5_bus: i3c5-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c6_bus: i3c6-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c7_bus: i3c7-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
new file mode 100644
index 000000000000..a397f068ed53
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SADK board device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "exynosautov920.dtsi"
+#include "exynos-pinctrl.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Samsung ExynosAutov920 SADK board";
+	compatible = "samsung,exynosautov920-sadk", "samsung,exynosautov920";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_wakeup &key_back>;
+
+		key-wakeup {
+			label = "KEY_WAKEUP";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		key-back {
+			label = "KEY_BACK";
+			linux,code = <KEY_BACK>;
+			gpios = <&gpp6 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x70000000>,
+		      <0x8 0x80000000 0x1 0xfba00000>,
+		      <0xa 0x00000000 0x2 0x00000000>;
+	};
+};
+
+&pinctrl_alive {
+	key_wakeup: key-wakeup-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+};
+
+&pinctrl_peric1 {
+	key_back: key-back-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_tout0>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&usi_0 {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&xtcxo {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
new file mode 100644
index 000000000000..c1c8566d74f5
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "samsung,exynosautov920";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_hsi0;
+		pinctrl3 = &pinctrl_hsi1;
+		pinctrl4 = &pinctrl_hsi2;
+		pinctrl5 = &pinctrl_hsi2ufs;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	xtcxo: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	/*
+	 * FIXME: Keep the stub clock for serial driver, until proper clock
+	 * driver is implemented.
+	 */
+	clock_usi: clock-usi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "usi";
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+		};
+
+		cpu8: cpu@20000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x20000>;
+			enable-method = "psci";
+		};
+
+		cpu9: cpu@20100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x20100>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynosautov920-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x10400000 0x10000>,
+			      <0x10460000 0x140000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscon_peric0: syscon@10820000 {
+			compatible = "samsung,exynosautov920-peric0-sysreg",
+				     "syscon";
+			reg = <0x10820000 0x2000>;
+		};
+
+		pinctrl_peric0: pinctrl@10830000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x10830000 0x10000>;
+			interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usi_0: usi@108800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108800c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1000>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&clock_usi>, <&clock_usi>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_0: serial@10880000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10880000 0xc0>;
+				interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_bus>;
+				clocks = <&clock_usi>, <&clock_usi>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		pwm: pwm@109b0000 {
+			compatible = "samsung,exynosautov920-pwm",
+				     "samsung,exynos4210-pwm";
+			reg = <0x109b0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&xtcxo>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		syscon_peric1: syscon@10c20000 {
+			compatible = "samsung,exynosautov920-peric1-sysreg",
+				     "syscon";
+			reg = <0x10c20000 0x2000>;
+		};
+
+		pinctrl_peric1: pinctrl@10c30000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x10c30000 0x10000>;
+			interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_alive: pinctrl@11850000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x11850000 0x10000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynosautov920-wakeup-eint";
+			};
+		};
+
+		pmu_system_controller: system-controller@11860000 {
+			compatible = "samsung,exynosautov920-pmu",
+				     "samsung,exynos7-pmu","syscon";
+			reg = <0x11860000 0x10000>;
+		};
+
+		pinctrl_hsi0: pinctrl@16040000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16040000 0x10000>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi1: pinctrl@16450000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16450000 0x10000>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi2: pinctrl@16c10000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16c10000 0x10000>;
+			interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi2ufs: pinctrl@16d20000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16d20000 0x10000>;
+			interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aud: pinctrl@1a460000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x1a460000 0x10000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "exynosautov920-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/google/Makefile b/arch/arm64/boot/dts/exynos/google/Makefile
new file mode 100644
index 000000000000..0a6d5e1fe4ee
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_EXYNOS) += \
+	gs101-oriole.dtb \
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
new file mode 100644
index 000000000000..4a71f752200d
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Oriole Device Tree
+ *
+ * Copyright 2021-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "gs101-pinctrl.h"
+#include "gs101.dtsi"
+
+/ {
+	model = "Oriole";
+	compatible = "google,gs101-oriole", "google,gs101";
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		/* Bootloader expects bootargs specified otherwise it crashes */
+		bootargs = "";
+		stdout-path = &serial_0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>;
+
+		button-vol-down {
+			label = "KEY_VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-vol-up {
+			label = "KEY_VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "KEY_POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&ext_24_5m {
+	clock-frequency = <24576000>;
+};
+
+&ext_200m {
+	clock-frequency = <200000000>;
+};
+
+&pinctrl_far_alive {
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa7-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa8-1";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_gpio_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa10-1";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&serial_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_bus>;
+	status = "okay";
+};
+
+&usi_uart {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&watchdog_cl0 {
+	timeout-sec = <30>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
new file mode 100644
index 000000000000..e6a9776d4d62
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
@@ -0,0 +1,1249 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include "gs101-pinctrl.h"
+
+&pinctrl_gpio_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa5: gpa5-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa9: gpa9-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa10: gpa10-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpa2-3", "gpa2-4";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	uart16_bus: uart16-bus-pins {
+		samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	uart17_bus: uart17-bus-pins {
+		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpa4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_far_alive {
+	gpa6: gpa6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa7: gpa7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa8: gpa8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa11: gpa11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+};
+
+&pinctrl_gsacore {
+	gps0: gps0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps1: gps1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps2: gps2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_gsactrl {
+	gps3: gps3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie0_clkreq: pcie0-clkreq-pins{
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+	};
+
+	pcie0_perst: pcie0-perst-pins {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph4: gph4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gph4-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gph4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gph4-3", "gph4-4", "gph4-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph3-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gph3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	pcie1_clkreq: pcie1-clkreq-pins {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+	};
+
+	pcie1_perst: pcie1-perst-pins {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp12: gpp12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp13: gpp13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp14: gpp14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp15: gpp15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp16: gpp16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp17: gpp17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp18: gpp18-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp19: gpp19-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* USI_PERIC0_UART_DBG */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	disp_te_pri_on: disp-te-pri-on-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+	};
+
+	disp_te_pri_off: disp-te-pri-off-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+	};
+
+	disp_te_sec_on: disp-te-sec-on-pins {
+		samsung,pins = "gpp0-4";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+	};
+
+	disp_te_sec_off: disp-te-sec-off-pins {
+		samsung,pins = "gpp0-4";
+		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+	};
+
+	sensor_mclk1_out: sensor-mclk1-out-pins {
+		samsung,pins = "gpp3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk1_fn: sensor-mclk1-fn-pins {
+		samsung,pins = "gpp3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk2_out: sensor-mclk2-out-pins {
+		samsung,pins = "gpp5-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk2_fn: sensor-mclk2-fn-pins {
+		samsung,pins = "gpp5-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk3_out: sensor-mclk3-out-pins {
+		samsung,pins = "gpp7-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk3_fn: sensor-mclk3-fn-pins {
+		samsung,pins = "gpp7-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk4_out: sensor-mclk4-out-pins {
+		samsung,pins = "gpp9-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk4_fn: sensor-mclk4-fn-pins {
+		samsung,pins = "gpp9-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk5_out: sensor-mclk5-out-pins {
+		samsung,pins = "gpp11-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk5_fn: sensor-mclk5-fn-pins {
+		samsung,pins = "gpp11-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk6_out: sensor-mclk6-out-pins {
+		samsung,pins = "gpp13-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk6_fn: sensor-mclk6-fn-pins {
+		samsung,pins = "gpp13-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk7_out: sensor-mclk7-out-pins {
+		samsung,pins = "gpp15-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk7_fn: sensor-mclk7-fn-pins {
+		samsung,pins = "gpp15-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk8_out: sensor-mclk8-out-pins {
+		samsung,pins = "gpp17-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk8_fn: sensor-mclk8-fn-pins {
+		samsung,pins = "gpp17-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart14_bus_single: uart14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1",
+			       "gpp18-2", "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>;
+	};
+
+	uart8_bus_single: uart8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2",
+			       "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart7_bus_single: uart7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1",
+			       "gpp14-2", "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart6_bus_single: uart6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1",
+			       "gpp12-2", "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart5_bus_single: uart5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1",
+			       "gpp10-2", "gpp10-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart4_bus_single: uart4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1",
+			       "gpp8-2", "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart3_bus_single: uart3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1",
+			       "gpp6-2", "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart2_bus_single: uart2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1",
+			       "gpp4-2", "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart1_bus_single: uart1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1",
+			       "gpp2-2", "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpp20: gpp20-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp21: gpp21-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp22: gpp22-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp23: gpp23-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp24: gpp24-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp25: gpp25-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp26: gpp26-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp27: gpp27-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins  {
+		samsung,pins = "gpp25-0", "gpp25-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart13_bus_single: uart13-bus-pins {
+		samsung,pins = "gpp25-0", "gpp25-1",
+			       "gpp25-2", "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart12_bus_single: uart12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5",
+			       "gpp23-6", "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs2: spi14-cs2-pins {
+		samsung,pins = "gpp23-6";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart11_bus_single: uart11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1",
+			       "gpp23-2", "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart10_bus_single: uart10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1",
+			       "gpp21-2", "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart9_bus_single: uart9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5",
+			       "gpp20-6", "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart0_bus_single: uart0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1",
+			       "gpp20-2", "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
new file mode 100644
index 000000000000..b7d276b1e25a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Pinctrl binding constants for GS101
+ *
+ * Copyright 2020-2023 Google LLC
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__
+
+#define GS101_PIN_PULL_NONE		0
+#define GS101_PIN_PULL_DOWN		1
+#define GS101_PIN_PULL_UP		3
+
+/* Pin function in power down mode */
+#define GS101_PIN_PDN_OUT0		0
+#define GS101_PIN_PDN_OUT1		1
+#define GS101_PIN_PDN_INPUT		2
+#define GS101_PIN_PDN_PREV		3
+
+/* GS101 drive strengths */
+#define GS101_PIN_DRV_2_5_MA		0
+#define GS101_PIN_DRV_5_MA		1
+#define GS101_PIN_DRV_7_5_MA		2
+#define GS101_PIN_DRV_10_MA		3
+
+#define GS101_PIN_FUNC_INPUT		0
+#define GS101_PIN_FUNC_OUTPUT		1
+#define GS101_PIN_FUNC_2		2
+#define GS101_PIN_FUNC_3		3
+#define GS101_PIN_FUNC_EINT		0xf
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__ */
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
new file mode 100644
index 000000000000..d838e3a7af6e
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include <dt-bindings/clock/google,gs101.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "google,gs101";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_gpio_alive;
+		pinctrl1 = &pinctrl_far_alive;
+		pinctrl2 = &pinctrl_gsacore;
+		pinctrl3 = &pinctrl_gsactrl;
+		pinctrl4 = &pinctrl_peric0;
+		pinctrl5 = &pinctrl_peric1;
+		pinctrl6 = &pinctrl_hsi1;
+		pinctrl7 = &pinctrl_hsi2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0000>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0100>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0200>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0300>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0400>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
+			capacity-dmips-mhz = <620>;
+			dynamic-power-coefficient = <284>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0500>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
+			capacity-dmips-mhz = <620>;
+			dynamic-power-coefficient = <284>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0600>;
+			enable-method = "psci";
+			cpu-idle-states =  <&HERA_CPU_SLEEP>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <650>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0700>;
+			enable-method = "psci";
+			cpu-idle-states =  <&HERA_CPU_SLEEP>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <650>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			ANANKE_CPU_SLEEP: cpu-ananke-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <70>;
+				exit-latency-us = <160>;
+				min-residency-us = <2000>;
+			};
+
+			ENYO_CPU_SLEEP: cpu-enyo-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <150>;
+				exit-latency-us = <190>;
+				min-residency-us = <2500>;
+			};
+
+			HERA_CPU_SLEEP: cpu-hera-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <235>;
+				exit-latency-us = <220>;
+				min-residency-us = <3500>;
+			};
+		};
+	};
+
+	/* TODO replace with CCF clock */
+	dummy_clk: clock-3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12345>;
+		clock-output-names = "pclk";
+	};
+
+	/* ect node is required to be present by bootloader */
+	ect {
+	};
+
+	ext_24_5m: clock-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	ext_200m: clock-2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "ext-200m";
+	};
+
+	pmu-0 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-1 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	pmu-2 {
+		compatible = "arm,cortex-x1-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
+	};
+
+	pmu-3 {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>;
+		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+		       <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		gsa_reserved_protected: gsa@90200000 {
+			reg = <0x0 0x90200000 0x400000>;
+			no-map;
+		};
+
+		tpu_fw_reserved: tpu-fw@93000000 {
+			reg = <0x0 0x93000000 0x1000000>;
+			no-map;
+		};
+
+		aoc_reserve: aoc@94000000 {
+			reg = <0x0 0x94000000 0x03000000>;
+			no-map;
+		};
+
+		abl_reserved: abl@f8800000 {
+			reg = <0x0 0xf8800000 0x02000000>;
+			no-map;
+		};
+
+		dss_log_reserved: dss-log-reserved@fd3f0000 {
+			reg = <0x0 0xfd3f0000 0x0000e000>;
+			no-map;
+		};
+
+		debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 {
+			reg = <0x0 0xfd3fe000 0x00001000>;
+			no-map;
+		};
+
+		bldr_log_reserved: bldr-log-reserved@fd800000 {
+			reg = <0x0 0xfd800000 0x00100000>;
+			no-map;
+		};
+
+		bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 {
+			reg = <0x0 0xfd900000 0x00002000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		cmu_misc: clock-controller@10010000 {
+			compatible = "google,gs101-cmu-misc";
+			reg = <0x10010000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&cmu_top CLK_DOUT_CMU_MISC_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_MISC_SSS>;
+			clock-names = "bus", "sss";
+		};
+
+		watchdog_cl0: watchdog@10060000 {
+			compatible = "google,gs101-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_PCLK>,
+				 <&ext_24_5m>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+			status = "disabled";
+		};
+
+		watchdog_cl1: watchdog@10070000 {
+			compatible = "google,gs101-wdt";
+			reg = <0x10070000 0x100>;
+			interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_PCLK>,
+				 <&ext_24_5m>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			interrupt-controller;
+			reg = <0x10400000 0x10000>, /* GICD */
+			      <0x10440000 0x100000>;/* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		sysreg_peric0: syscon@10820000 {
+			compatible = "google,gs101-peric0-sysreg", "syscon";
+			reg = <0x10820000 0x10000>;
+		};
+
+		pinctrl_peric0: pinctrl@10840000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x10840000 0x00001000>;
+			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		usi_uart: usi@10a000c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10a000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&dummy_clk>, <&dummy_clk>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			status = "disabled";
+
+			serial_0: serial@10a00000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10a00000 0xc0>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 634
+					      IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&dummy_clk 0>, <&dummy_clk 0>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		sysreg_peric1: syscon@10c20000 {
+			compatible = "google,gs101-peric1-sysreg", "syscon";
+			reg = <0x10c20000 0x10000>;
+		};
+
+		pinctrl_peric1: pinctrl@10c40000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x10c40000 0x00001000>;
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		pinctrl_hsi1: pinctrl@11840000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x11840000 0x00001000>;
+			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		pinctrl_hsi2: pinctrl@14440000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x14440000 0x00001000>;
+			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		cmu_apm: clock-controller@17400000 {
+			compatible = "google,gs101-cmu-apm";
+			reg = <0x17400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>;
+			clock-names = "oscclk";
+		};
+
+		sysreg_apm: syscon@174204e0 {
+			compatible = "google,gs101-apm-sysreg", "syscon";
+			reg = <0x174204e0 0x1000>;
+		};
+
+		pmu_system_controller: system-controller@17460000 {
+			compatible = "google,gs101-pmu", "syscon";
+			reg = <0x17460000 0x10000>;
+		};
+
+		pinctrl_gpio_alive: pinctrl@174d0000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x174d0000 0x00001000>;
+
+			wakeup-interrupt-controller {
+				compatible = "google,gs101-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_far_alive: pinctrl@174e0000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x174e0000 0x00001000>;
+
+			wakeup-interrupt-controller {
+				compatible = "google,gs101-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_gsactrl: pinctrl@17940000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x17940000 0x00001000>;
+		};
+
+		pinctrl_gsacore: pinctrl@17a80000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x17a80000 0x00001000>;
+		};
+
+		cmu_top: clock-controller@1e080000 {
+			compatible = "google,gs101-cmu-top";
+			reg = <0x1e080000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>;
+			clock-names = "oscclk";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts =
+		   <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
+	};
+};
+
+#include "gs101-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 300049037eb0..2cb0212b63c6 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -20,23 +20,41 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb
+DTC_FLAGS_fsl-ls1088a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
+DTC_FLAGS_fsl-ls1088a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
+DTC_FLAGS_fsl-ls1088a-ten64 := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
+DTC_FLAGS_fsl-ls1088a-tqmls1088a-mbls10xxa := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-tqmls1088a-mbls10xxa.dtb
+DTC_FLAGS_fsl-ls2080a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
+DTC_FLAGS_fsl-ls2080a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+DTC_FLAGS_fsl-ls2081a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
+DTC_FLAGS_fsl-ls2080a-simu := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+DTC_FLAGS_fsl-ls2088a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+DTC_FLAGS_fsl-ls2088a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+DTC_FLAGS_fsl-lx2160a-bluebox3 := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3.dtb
+DTC_FLAGS_fsl-lx2160a-bluebox3-rev-a := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3-rev-a.dtb
+DTC_FLAGS_fsl-lx2160a-clearfog-cx := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb
+DTC_FLAGS_fsl-lx2160a-honeycomb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
+DTC_FLAGS_fsl-lx2160a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
+DTC_FLAGS_fsl-lx2160a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
+DTC_FLAGS_fsl-lx2162a-clearfog := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-clearfog.dtb
+DTC_FLAGS_fsl-lx2162a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb
 
 fsl-ls1028a-qds-13bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-13bb.dtbo
@@ -53,6 +71,33 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
 
+DTC_FLAGS_fsl-lx2160a-tqmlx2160a-mblx2160a := -Wno-interrupt_map
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo
+
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
@@ -84,9 +129,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7905-0x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb
 
 imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtbo
@@ -95,9 +142,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-dimonoff-gateway-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-rve-gateway.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
@@ -115,6 +164,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
@@ -123,13 +175,17 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
 
 imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo
+imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
@@ -164,6 +220,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
 
 imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index a863022529ac..1e3fe3897b52 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -307,46 +307,46 @@
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <0 33 0x4>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
-			fsl,tmu-calibration = <0x00000000 0x00000025
-					       0x00000001 0x0000002c
-					       0x00000002 0x00000032
-					       0x00000003 0x00000039
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000046
-					       0x00000006 0x0000004c
-					       0x00000007 0x00000053
-					       0x00000008 0x00000059
-					       0x00000009 0x0000005f
-					       0x0000000a 0x00000066
-					       0x0000000b 0x0000006c
-
-					       0x00010000 0x00000026
-					       0x00010001 0x0000002d
-					       0x00010002 0x00000035
-					       0x00010003 0x0000003d
-					       0x00010004 0x00000045
-					       0x00010005 0x0000004d
-					       0x00010006 0x00000055
-					       0x00010007 0x0000005d
-					       0x00010008 0x00000065
-					       0x00010009 0x0000006d
-
-					       0x00020000 0x00000026
-					       0x00020001 0x00000030
-					       0x00020002 0x0000003a
-					       0x00020003 0x00000044
-					       0x00020004 0x0000004e
-					       0x00020005 0x00000059
-					       0x00020006 0x00000063
-
-					       0x00030000 0x00000014
-					       0x00030001 0x00000021
-					       0x00030002 0x0000002e
-					       0x00030003 0x0000003a
-					       0x00030004 0x00000047
-					       0x00030005 0x00000053
-					       0x00030006 0x00000060>;
-			big-endian;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000025>,
+					<0x00000001 0x0000002c>,
+					<0x00000002 0x00000032>,
+					<0x00000003 0x00000039>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000046>,
+					<0x00000006 0x0000004c>,
+					<0x00000007 0x00000053>,
+					<0x00000008 0x00000059>,
+					<0x00000009 0x0000005f>,
+					<0x0000000a 0x00000066>,
+					<0x0000000b 0x0000006c>,
+
+					<0x00010000 0x00000026>,
+					<0x00010001 0x0000002d>,
+					<0x00010002 0x00000035>,
+					<0x00010003 0x0000003d>,
+					<0x00010004 0x00000045>,
+					<0x00010005 0x0000004d>,
+					<0x00010006 0x00000055>,
+					<0x00010007 0x0000005d>,
+					<0x00010008 0x00000065>,
+					<0x00010009 0x0000006d>,
+
+					<0x00020000 0x00000026>,
+					<0x00020001 0x00000030>,
+					<0x00020002 0x0000003a>,
+					<0x00020003 0x00000044>,
+					<0x00020004 0x0000004e>,
+					<0x00020005 0x00000059>,
+					<0x00020006 0x00000063>,
+
+					<0x00030000 0x00000014>,
+					<0x00030001 0x00000021>,
+					<0x00030002 0x0000002e>,
+					<0x00030003 0x0000003a>,
+					<0x00030004 0x00000047>,
+					<0x00030005 0x00000053>,
+					<0x00030006 0x00000060>;
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index eefe3577d94e..ae534c23b970 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1026,49 +1026,50 @@
 			reg = <0x0 0x1f80000 0x0 0x10000>;
 			interrupts = <0 23 0x4>;
 			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
-			fsl,tmu-calibration = <0x00000000 0x00000024
-					       0x00000001 0x0000002b
-					       0x00000002 0x00000031
-					       0x00000003 0x00000038
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000045
-					       0x00000006 0x0000004c
-					       0x00000007 0x00000053
-					       0x00000008 0x00000059
-					       0x00000009 0x00000060
-					       0x0000000a 0x00000066
-					       0x0000000b 0x0000006d
-
-					       0x00010000 0x0000001c
-					       0x00010001 0x00000024
-					       0x00010002 0x0000002c
-					       0x00010003 0x00000035
-					       0x00010004 0x0000003d
-					       0x00010005 0x00000045
-					       0x00010006 0x0000004d
-					       0x00010007 0x00000055
-					       0x00010008 0x0000005e
-					       0x00010009 0x00000066
-					       0x0001000a 0x0000006e
-
-					       0x00020000 0x00000018
-					       0x00020001 0x00000022
-					       0x00020002 0x0000002d
-					       0x00020003 0x00000038
-					       0x00020004 0x00000043
-					       0x00020005 0x0000004d
-					       0x00020006 0x00000058
-					       0x00020007 0x00000063
-					       0x00020008 0x0000006e
-
-					       0x00030000 0x00000010
-					       0x00030001 0x0000001c
-					       0x00030002 0x00000029
-					       0x00030003 0x00000036
-					       0x00030004 0x00000042
-					       0x00030005 0x0000004f
-					       0x00030006 0x0000005b
-					       0x00030007 0x00000068>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000024>,
+					<0x00000001 0x0000002b>,
+					<0x00000002 0x00000031>,
+					<0x00000003 0x00000038>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000045>,
+					<0x00000006 0x0000004c>,
+					<0x00000007 0x00000053>,
+					<0x00000008 0x00000059>,
+					<0x00000009 0x00000060>,
+					<0x0000000a 0x00000066>,
+					<0x0000000b 0x0000006d>,
+
+					<0x00010000 0x0000001c>,
+					<0x00010001 0x00000024>,
+					<0x00010002 0x0000002c>,
+					<0x00010003 0x00000035>,
+					<0x00010004 0x0000003d>,
+					<0x00010005 0x00000045>,
+					<0x00010006 0x0000004d>,
+					<0x00010007 0x00000055>,
+					<0x00010008 0x0000005e>,
+					<0x00010009 0x00000066>,
+					<0x0001000a 0x0000006e>,
+
+					<0x00020000 0x00000018>,
+					<0x00020001 0x00000022>,
+					<0x00020002 0x0000002d>,
+					<0x00020003 0x00000038>,
+					<0x00020004 0x00000043>,
+					<0x00020005 0x0000004d>,
+					<0x00020006 0x00000058>,
+					<0x00020007 0x00000063>,
+					<0x00020008 0x0000006e>,
+
+					<0x00030000 0x00000010>,
+					<0x00030001 0x0000001c>,
+					<0x00030002 0x00000029>,
+					<0x00030003 0x00000036>,
+					<0x00030004 0x00000042>,
+					<0x00030005 0x0000004f>,
+					<0x00030006 0x0000005b>,
+					<0x00030007 0x00000068>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 229bb4bebe42..d333b773bc45 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -447,46 +447,47 @@
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <0 33 0x4>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
-			fsl,tmu-calibration = <0x00000000 0x00000023
-					       0x00000001 0x0000002a
-					       0x00000002 0x00000031
-					       0x00000003 0x00000037
-					       0x00000004 0x0000003e
-					       0x00000005 0x00000044
-					       0x00000006 0x0000004b
-					       0x00000007 0x00000051
-					       0x00000008 0x00000058
-					       0x00000009 0x0000005e
-					       0x0000000a 0x00000065
-					       0x0000000b 0x0000006b
-
-					       0x00010000 0x00000023
-					       0x00010001 0x0000002b
-					       0x00010002 0x00000033
-					       0x00010003 0x0000003b
-					       0x00010004 0x00000043
-					       0x00010005 0x0000004b
-					       0x00010006 0x00000054
-					       0x00010007 0x0000005c
-					       0x00010008 0x00000064
-					       0x00010009 0x0000006c
-
-					       0x00020000 0x00000021
-					       0x00020001 0x0000002c
-					       0x00020002 0x00000036
-					       0x00020003 0x00000040
-					       0x00020004 0x0000004b
-					       0x00020005 0x00000055
-					       0x00020006 0x0000005f
-
-					       0x00030000 0x00000013
-					       0x00030001 0x0000001d
-					       0x00030002 0x00000028
-					       0x00030003 0x00000032
-					       0x00030004 0x0000003d
-					       0x00030005 0x00000047
-					       0x00030006 0x00000052
-					       0x00030007 0x0000005c>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000023>,
+					<0x00000001 0x0000002a>,
+					<0x00000002 0x00000031>,
+					<0x00000003 0x00000037>,
+					<0x00000004 0x0000003e>,
+					<0x00000005 0x00000044>,
+					<0x00000006 0x0000004b>,
+					<0x00000007 0x00000051>,
+					<0x00000008 0x00000058>,
+					<0x00000009 0x0000005e>,
+					<0x0000000a 0x00000065>,
+					<0x0000000b 0x0000006b>,
+
+					<0x00010000 0x00000023>,
+					<0x00010001 0x0000002b>,
+					<0x00010002 0x00000033>,
+					<0x00010003 0x0000003b>,
+					<0x00010004 0x00000043>,
+					<0x00010005 0x0000004b>,
+					<0x00010006 0x00000054>,
+					<0x00010007 0x0000005c>,
+					<0x00010008 0x00000064>,
+					<0x00010009 0x0000006c>,
+
+					<0x00020000 0x00000021>,
+					<0x00020001 0x0000002c>,
+					<0x00020002 0x00000036>,
+					<0x00020003 0x00000040>,
+					<0x00020004 0x0000004b>,
+					<0x00020005 0x00000055>,
+					<0x00020006 0x0000005f>,
+
+					<0x00030000 0x00000013>,
+					<0x00030001 0x0000001d>,
+					<0x00030002 0x00000028>,
+					<0x00030003 0x00000032>,
+					<0x00030004 0x0000003d>,
+					<0x00030005 0x00000047>,
+					<0x00030006 0x00000052>,
+					<0x00030007 0x0000005c>;
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 50f68ca5a9af..1515cec23147 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -445,46 +445,46 @@
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000023
-				0x00000001 0x00000029
-				0x00000002 0x0000002f
-				0x00000003 0x00000036
-				0x00000004 0x0000003c
-				0x00000005 0x00000042
-				0x00000006 0x00000049
-				0x00000007 0x0000004f
-				0x00000008 0x00000055
-				0x00000009 0x0000005c
-				0x0000000a 0x00000062
-				0x0000000b 0x00000068
+				<0x00000000 0x00000023>,
+				<0x00000001 0x00000029>,
+				<0x00000002 0x0000002f>,
+				<0x00000003 0x00000036>,
+				<0x00000004 0x0000003c>,
+				<0x00000005 0x00000042>,
+				<0x00000006 0x00000049>,
+				<0x00000007 0x0000004f>,
+				<0x00000008 0x00000055>,
+				<0x00000009 0x0000005c>,
+				<0x0000000a 0x00000062>,
+				<0x0000000b 0x00000068>,
 				/* Calibration data group 2 */
-				0x00010000 0x00000022
-				0x00010001 0x0000002a
-				0x00010002 0x00000032
-				0x00010003 0x0000003a
-				0x00010004 0x00000042
-				0x00010005 0x0000004a
-				0x00010006 0x00000052
-				0x00010007 0x0000005a
-				0x00010008 0x00000062
-				0x00010009 0x0000006a
+				<0x00010000 0x00000022>,
+				<0x00010001 0x0000002a>,
+				<0x00010002 0x00000032>,
+				<0x00010003 0x0000003a>,
+				<0x00010004 0x00000042>,
+				<0x00010005 0x0000004a>,
+				<0x00010006 0x00000052>,
+				<0x00010007 0x0000005a>,
+				<0x00010008 0x00000062>,
+				<0x00010009 0x0000006a>,
 				/* Calibration data group 3 */
-				0x00020000 0x00000021
-				0x00020001 0x0000002b
-				0x00020002 0x00000035
-				0x00020003 0x0000003e
-				0x00020004 0x00000048
-				0x00020005 0x00000052
-				0x00020006 0x0000005c
+				<0x00020000 0x00000021>,
+				<0x00020001 0x0000002b>,
+				<0x00020002 0x00000035>,
+				<0x00020003 0x0000003e>,
+				<0x00020004 0x00000048>,
+				<0x00020005 0x00000052>,
+				<0x00020006 0x0000005c>,
 				/* Calibration data group 4 */
-				0x00030000 0x00000011
-				0x00030001 0x0000001a
-				0x00030002 0x00000024
-				0x00030003 0x0000002e
-				0x00030004 0x00000038
-				0x00030005 0x00000042
-				0x00030006 0x0000004c
-				0x00030007 0x00000056>;
+				<0x00030000 0x00000011>,
+				<0x00030001 0x0000001a>,
+				<0x00030002 0x00000024>,
+				<0x00030003 0x0000002e>,
+				<0x00030004 0x00000038>,
+				<0x00030005 0x00000042>,
+				<0x00030006 0x0000004c>,
+				<0x00030007 0x00000056>;
 			big-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 8f6090a9aef2..8616d5e0c388 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -284,46 +284,46 @@
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000023
-				0x00000001 0x0000002a
-				0x00000002 0x00000030
-				0x00000003 0x00000037
-				0x00000004 0x0000003d
-				0x00000005 0x00000044
-				0x00000006 0x0000004a
-				0x00000007 0x00000051
-				0x00000008 0x00000057
-				0x00000009 0x0000005e
-				0x0000000a 0x00000064
-				0x0000000b 0x0000006b
+				<0x00000000 0x00000023>,
+				<0x00000001 0x0000002a>,
+				<0x00000002 0x00000030>,
+				<0x00000003 0x00000037>,
+				<0x00000004 0x0000003d>,
+				<0x00000005 0x00000044>,
+				<0x00000006 0x0000004a>,
+				<0x00000007 0x00000051>,
+				<0x00000008 0x00000057>,
+				<0x00000009 0x0000005e>,
+				<0x0000000a 0x00000064>,
+				<0x0000000b 0x0000006b>,
 				/* Calibration data group 2 */
-				0x00010000 0x00000022
-				0x00010001 0x0000002a
-				0x00010002 0x00000032
-				0x00010003 0x0000003a
-				0x00010004 0x00000042
-				0x00010005 0x0000004a
-				0x00010006 0x00000052
-				0x00010007 0x0000005a
-				0x00010008 0x00000062
-				0x00010009 0x0000006a
+				<0x00010000 0x00000022>,
+				<0x00010001 0x0000002a>,
+				<0x00010002 0x00000032>,
+				<0x00010003 0x0000003a>,
+				<0x00010004 0x00000042>,
+				<0x00010005 0x0000004a>,
+				<0x00010006 0x00000052>,
+				<0x00010007 0x0000005a>,
+				<0x00010008 0x00000062>,
+				<0x00010009 0x0000006a>,
 				/* Calibration data group 3 */
-				0x00020000 0x00000021
-				0x00020001 0x0000002b
-				0x00020002 0x00000035
-				0x00020003 0x00000040
-				0x00020004 0x0000004a
-				0x00020005 0x00000054
-				0x00020006 0x0000005e
+				<0x00020000 0x00000021>,
+				<0x00020001 0x0000002b>,
+				<0x00020002 0x00000035>,
+				<0x00020003 0x00000040>,
+				<0x00020004 0x0000004a>,
+				<0x00020005 0x00000054>,
+				<0x00020006 0x0000005e>,
 				/* Calibration data group 4 */
-				0x00030000 0x00000010
-				0x00030001 0x0000001c
-				0x00030002 0x00000027
-				0x00030003 0x00000032
-				0x00030004 0x0000003e
-				0x00030005 0x00000049
-				0x00030006 0x00000054
-				0x00030007 0x00000060>;
+				<0x00030000 0x00000010>,
+				<0x00030001 0x0000001c>,
+				<0x00030002 0x00000027>,
+				<0x00030003 0x00000032>,
+				<0x00030004 0x0000003e>,
+				<0x00030005 0x00000049>,
+				<0x00030006 0x00000054>,
+				<0x00030007 0x00000060>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 717288bbdb8b..0b7292835906 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -321,42 +321,43 @@
 			reg = <0x0 0x1f80000 0x0 0x10000>;
 			interrupts = <0 23 0x4>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
-			fsl,tmu-calibration = <0x00000000 0x00000026
-					       0x00000001 0x0000002d
-					       0x00000002 0x00000032
-					       0x00000003 0x00000039
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000046
-					       0x00000006 0x0000004d
-					       0x00000007 0x00000054
-					       0x00000008 0x0000005a
-					       0x00000009 0x00000061
-					       0x0000000a 0x0000006a
-					       0x0000000b 0x00000071
-
-					       0x00010000 0x00000025
-					       0x00010001 0x0000002c
-					       0x00010002 0x00000035
-					       0x00010003 0x0000003d
-					       0x00010004 0x00000045
-					       0x00010005 0x0000004e
-					       0x00010006 0x00000057
-					       0x00010007 0x00000061
-					       0x00010008 0x0000006b
-					       0x00010009 0x00000076
-
-					       0x00020000 0x00000029
-					       0x00020001 0x00000033
-					       0x00020002 0x0000003d
-					       0x00020003 0x00000049
-					       0x00020004 0x00000056
-					       0x00020005 0x00000061
-					       0x00020006 0x0000006d
-
-					       0x00030000 0x00000021
-					       0x00030001 0x0000002a
-					       0x00030002 0x0000003c
-					       0x00030003 0x0000004e>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000026>,
+					<0x00000001 0x0000002d>,
+					<0x00000002 0x00000032>,
+					<0x00000003 0x00000039>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000046>,
+					<0x00000006 0x0000004d>,
+					<0x00000007 0x00000054>,
+					<0x00000008 0x0000005a>,
+					<0x00000009 0x00000061>,
+					<0x0000000a 0x0000006a>,
+					<0x0000000b 0x00000071>,
+
+					<0x00010000 0x00000025>,
+					<0x00010001 0x0000002c>,
+					<0x00010002 0x00000035>,
+					<0x00010003 0x0000003d>,
+					<0x00010004 0x00000045>,
+					<0x00010005 0x0000004e>,
+					<0x00010006 0x00000057>,
+					<0x00010007 0x00000061>,
+					<0x00010008 0x0000006b>,
+					<0x00010009 0x00000076>,
+
+					<0x00020000 0x00000029>,
+					<0x00020001 0x00000033>,
+					<0x00020002 0x0000003d>,
+					<0x00020003 0x00000049>,
+					<0x00020004 0x00000056>,
+					<0x00020005 0x00000061>,
+					<0x00020006 0x0000006d>,
+
+					<0x00030000 0x00000021>,
+					<0x00030001 0x0000002a>,
+					<0x00030002 0x0000003c>,
+					<0x00030003 0x0000004e>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
new file mode 100644
index 000000000000..da0f58e26b9a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "fsl-lx2160a-tqmlx2160a.dtsi"
+
+/ {
+	model = "TQ Systems GmbH MBLX2160A Starterkit";
+	compatible = "tq,lx2160a-tqmlx2160a-mblx2160a", "tq,lx2160a-tqmlx2160a",
+		     "fsl,lx2160a";
+
+	aliases {
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-user1 {
+			label = "button:user1";
+			gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F1>;
+		};
+
+		button-user2 {
+			label = "button:user2";
+			gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user1 {
+			gpios = <&gpioex1 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user2 {
+			gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <1>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sfp_xfi1: sfp-xfi1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&xfi1_i2c>;
+		mod-def0-gpios = <&gpioex2 2 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioex2 3 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioex2 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioex2 1 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	sfp_xfi2: sfp-xfi2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&xfi2_i2c>;
+		mod-def0-gpios = <&gpioex2 6 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioex2 7 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioex2 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioex2 5 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&dp83867_2_3>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&dp83867_2_4>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	dp83867_1_1: ethernet-phy@1 {
+		reg = <1>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_2: ethernet-phy@2 {
+		reg = <2>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_3: ethernet-phy@3 {
+		reg = <3>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_4: ethernet-phy@4 {
+		reg = <4>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_5: ethernet-phy@5 {
+		reg = <5>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_6: ethernet-phy@6 {
+		reg = <6>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	dp83867_2_1: ethernet-phy@1 {
+		reg = <1>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_2: ethernet-phy@2 {
+		reg = <2>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_3: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_4: ethernet-phy@4 {
+		reg = <4>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	no-mmc;
+	no-sdio;
+	wp-gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c0 {
+	gpioex3: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_vcc3v3>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpioex0: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+
+			gpioex1: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+
+			gpioex2: gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_vcc3v3>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		xfi1_i2c: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		xfi2_i2c: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&pcs_mdio17 {
+	status = "okay";
+};
+
+&pcs_mdio18 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso
new file mode 100644
index 000000000000..8284a564e20d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac9 {
+	phy-handle = <&dp83867_2_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac10 {
+	phy-handle = <&dp83867_2_2>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio9 {
+	status = "okay";
+};
+
+&pcs_mdio10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso
new file mode 100644
index 000000000000..636b17a383ed
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac1 {
+	managed = "in-band-status";
+};
+
+&pcs_mdio1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso
new file mode 100644
index 000000000000..6d0c808cd840
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+	phy-handle = <&dp83867_1_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac13 {
+	phy-handle = <&dp83867_1_5>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	phy-handle = <&dp83867_1_6>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac16 {
+	phy-handle = <&dp83867_1_4>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+	status = "okay";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&pcs_mdio16 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso
new file mode 100644
index 000000000000..db88a86ff69c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+	phy-handle = <&dp83867_1_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac13 {
+	sfp = <&sfp_xfi1>;
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	sfp = <&sfp_xfi2>;
+	managed = "in-band-status";
+};
+
+&dpmac16 {
+	phy-handle = <&dp83867_1_4>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+	status = "okay";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&pcs_mdio16 {
+	status = "okay";
+};
+
+&sfp_xfi1 {
+	status = "okay";
+};
+
+&sfp_xfi2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso
new file mode 100644
index 000000000000..f6dfa76aa0e7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac13 {
+	sfp = <&sfp_xfi1>;
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	sfp = <&sfp_xfi2>;
+	managed = "in-band-status";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sfp_xfi1 {
+	status = "okay";
+};
+
+&sfp_xfi2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi
new file mode 100644
index 000000000000..89a4765737b4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+
+&emdio1 {
+	status = "okay";
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc1 {
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <10000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+
+	flash1: flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <10000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&i2c0 {
+	scl-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	sensor0: temperature-sensor@1f {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x1f>;
+	};
+
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+
+	eeprom2: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index f176ca2e244e..6640b49670ae 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -732,9 +732,9 @@
 			fsl,tmu-range = <0x800000e6 0x8001017d>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000035
+				<0x00000000 0x00000035>,
 				/* Calibration data group 2 */
-				0x00000001 0x00000154>;
+				<0x00000001 0x00000154>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
index 72136c436a70..f6654fdcb147 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
@@ -68,6 +68,7 @@
 		gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-name = "can1_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_can2_supply: regulator-can2-supply {
@@ -77,6 +78,7 @@
 		gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-name = "can2_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_usb_host_vbus: regulator-usb-host-vbus {
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index 9d75ce467569..f057c6b21b30 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -24,7 +24,6 @@ audio_subsys: bus@59000000 {
 		compatible = "fsl,imx8qm-edma";
 		reg = <0x591f0000 0x190000>;
 		#dma-cells = <3>;
-		shared-interrupt;
 		dma-channels = <24>;
 		dma-channel-mask = <0x5c0c00>;
 		interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 0 */
@@ -127,7 +126,6 @@ audio_subsys: bus@59000000 {
 		compatible = "fsl,imx8qm-edma";
 		reg = <0x599f0000 0xc0000>;
 		#dma-cells = <3>;
-		shared-interrupt;
 		dma-channels = <11>;
 		dma-channel-mask = <0xc0>;
 		interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 1 */
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
index a414df645351..6d13e4fafb76 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -13,6 +13,13 @@
 		clock-frequency = <250000000>;
 		clock-output-names = "conn_enet0_root_clk";
 	};
+
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
 };
 
 &conn_subsys {
@@ -22,7 +29,7 @@
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "eth_wake_irq", "macirq";
+		interrupt-names = "macirq", "eth_wake_irq";
 		clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
 			 <&eqos_lpcg IMX_LPCG_CLK_6>,
 			 <&eqos_lpcg IMX_LPCG_CLK_0>,
@@ -53,13 +60,6 @@
 		rx-burst-size-dword = <0x10>;
 		power-domains = <&pd IMX_SC_R_USB_1>;
 		status = "disabled";
-
-		clk_dummy: clock-dummy {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "clk_dummy";
-		};
 	};
 
 	usbmisc2: usbmisc@5b0e0200 {
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
index 550f513708d8..3569abb5bb9b 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
@@ -4,6 +4,6 @@
  */
 
 &ddr_pmu0 {
-	compatible = "fsl,imx8-ddr-pmu";
+	compatible = "fsl,imx8dxl-ddr-pmu", "fsl,imx8-ddr-pmu";
 	interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index f264102bdb27..62ed64663f49 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -3,6 +3,8 @@
  * Copyright 2020 Compass Electronics Group, LLC
  */
 
+#include "imx8mm-overdrive.dtsi"
+
 / {
 	aliases {
 		rtc0 = &rtc;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
index d897a8527335..44c2cba41a1f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
@@ -104,7 +104,7 @@
 		compatible = "nxp,pca8574";
 		reg = <0x3a>;
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index a882c86ec313..b53104ed8919 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -367,12 +367,6 @@
 		interrupts = <11 8>;
 		status = "okay";
 
-		port {
-			typec1_dr_sw: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-
 		typec1_con: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -384,6 +378,12 @@
 				     PDO_VAR(5000, 20000, 3000)>;
 			op-sink-microwatt = <15000000>;
 			self-powered;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 0e8f0d7161ad..12fb79d20b29 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -220,7 +220,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c3@0 {
+		i2c@0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi
new file mode 100644
index 000000000000..b31436b5e9b7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu_2d {
+	assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
+			  <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-rates = <0>, <1000000000>;
+};
+
+&gpu_3d {
+	assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
+			  <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-rates = <0>, <1000000000>;
+};
+
+&vpu_blk_ctrl {
+	assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+			  <&clk IMX8MM_CLK_VPU_G2>,
+			  <&clk IMX8MM_CLK_VPU_H1>,
+			  <&clk IMX8MM_VPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
+				 <&clk IMX8MM_VPU_PLL_OUT>,
+				 <&clk IMX8MM_SYS_PLL3_OUT>;
+	assigned-clock-rates = <750000000>,
+			       <700000000>,
+			       <750000000>,
+			       <700000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
index 968f475b9a96..27a902569e2a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
@@ -120,7 +120,7 @@
 	};
 
 	tpm: tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio2>;
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
index 156d793a0c97..ea6e8b85169f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx";
 	compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index 3a0a10e835a2..752caa38eb03 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -84,8 +84,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio1 {
@@ -152,23 +159,30 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		pcie@1,0 {
+		pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
-			pcie@2,3 {
+			pcie@3,0 {
 				reg = <0x1800 0 0 0 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
 
-				eth1: pcie@5,0 {
+				eth1: ethernet@0,0 {
 					reg = <0x0000 0 0 0 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
 
 					local-mac-address = [00 00 00 00 00 00];
 				};
@@ -312,6 +326,7 @@
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xd6
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index d79fe9f62b95..2aa6c1090fc7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -109,7 +109,7 @@
 	status = "okay";
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
 		spi-max-frequency = <36000000>;
 	};
@@ -179,23 +179,30 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		pcie@1,0 {
+		pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
-			pcie@2,4 {
+			pcie@4,0 {
 				reg = <0x2000 0 0 0 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
 
-				eth1: pcie@6,0 {
+				eth1: ethernet@0,0 {
 					reg = <0x0000 0 0 0 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
 
 					local-mac-address = [00 00 00 00 00 00];
 				};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 06a394a41d7c..c11260c26d0b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -635,13 +635,16 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		eth1: pcie@1,0 {
+		eth1: ethernet@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
 			local-mac-address = [00 00 00 00 00 00];
 		};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi
new file mode 100644
index 000000000000..4a0799d63446
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin IMX8MM SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* EEPROM on Mallow */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Temperature sensor on Mallow */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0	0x106>, /* SODIMM 52 */
+			<MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x106>, /* SODIMM 54 */
+			<MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6	0x106>, /* SODIMM 56 */
+			<MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x106>; /* SODIMM 58 */
+	};
+
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2	0x146>; /* SODIMM 64 */
+	};
+
+	pinctrl_tpm_irq: tpmirqgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14	0x141>; /* SODIMM 66 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000000..1b1999f3a80e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Mallow";
+	compatible = "toradex,verdin-imx8mm-nonwifi-mallow",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts
new file mode 100644
index 000000000000..2916145f31bb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Mallow";
+	compatible = "toradex,verdin-imx8mm-wifi-mallow",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 738024baaa57..8a1b42b94dce 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -636,6 +636,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mm-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
@@ -647,7 +649,6 @@
 						<&clk IMX8MM_CLK_AUDIO_AHB>,
 						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
 						<&clk IMX8MM_SYS_PLL3>,
-						<&clk IMX8MM_VIDEO_PLL1>,
 						<&clk IMX8MM_AUDIO_PLL1>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
 							 <&clk IMX8MM_ARM_PLL_OUT>,
@@ -657,7 +658,6 @@
 							<400000000>,
 							<400000000>,
 							<750000000>,
-							<594000000>,
 							<393216000>;
 			};
 
@@ -1133,7 +1133,7 @@
 				assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>,
 							 <&clk IMX8MM_SYS_PLL2_1000M>,
 							 <&clk IMX8MM_SYS_PLL1_800M>;
-				assigned-clock-rates = <594000000>, <500000000>, <200000000>;
+				assigned-clock-rates = <24000000>, <500000000>, <200000000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>;
 				status = "disabled";
@@ -1151,12 +1151,8 @@
 				clocks = <&clk IMX8MM_CLK_DSI_CORE>,
 					 <&clk IMX8MM_CLK_DSI_PHY_REF>;
 				clock-names = "bus_clk", "sclk_mipi";
-				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
-						  <&clk IMX8MM_CLK_DSI_PHY_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
-							 <&clk IMX8MM_CLK_24M>;
-				assigned-clock-rates = <266000000>, <24000000>;
-				samsung,pll-clock-frequency = <24000000>;
+				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>;
 				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
 				status = "disabled";
@@ -1408,7 +1404,7 @@
 			assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
 					  <&clk IMX8MM_GPU_PLL_OUT>;
 			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
-			assigned-clock-rates = <0>, <1000000000>;
+			assigned-clock-rates = <0>, <800000000>;
 			power-domains = <&pgc_gpu>;
 		};
 
@@ -1423,7 +1419,7 @@
 			assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
 					  <&clk IMX8MM_GPU_PLL_OUT>;
 			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
-			assigned-clock-rates = <0>, <1000000000>;
+			assigned-clock-rates = <0>, <800000000>;
 			power-domains = <&pgc_gpu>;
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index 90073b16536f..2a64115eebf1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -3,6 +3,8 @@
  * Copyright 2020 Compass Electronics Group, LLC
  */
 
+#include "imx8mn-overdrive.dtsi"
+
 / {
 	aliases {
 		rtc0 = &rtc;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
index 22a754d438f1..bbb07c650da9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "imx8mn.dtsi"
+#include "imx8mn-bsh-smm-s2-display.dtsi"
 
 / {
 	chosen {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
new file mode 100644
index 000000000000..7675583a6b67
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 BSH
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 700000 0>;	/* 700000 ns = 1337Hz */
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <50>;
+		status = "okay";
+	};
+
+	reg_3v3_dvdd: regulator-3v3-O3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dvdd>;
+		regulator-name = "3v3-dvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_v3v3_avdd: regulator-3v3-O2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_avdd>;
+		regulator-name = "3v3-avdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bl>;
+	status = "okay";
+};
+
+&lcdif {
+	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
+	assigned-clock-rates = <594000000>;
+	status = "okay";
+};
+
+&pgc_dispmix {
+	assigned-clocks = <&clk IMX8MN_CLK_DISP_AXI>, <&clk IMX8MN_CLK_DISP_APB>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, <&clk IMX8MN_SYS_PLL1_800M>;
+	assigned-clock-rates = <500000000>, <200000000>;
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,esc-clock-frequency = <20000000>;
+	samsung,pll-clock-frequency = <12000000>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "sharp,ls068b3sx02", "syna,r63353";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		reg = <0>;
+
+		backlight = <&backlight>;
+		dvdd-supply = <&reg_3v3_dvdd>;
+		avdd-supply = <&reg_v3v3_avdd>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_avdd: avddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x16	/* VDD 3V3_VO2 */
+		>;
+	};
+
+	/* This is for both PWM and voltage regulators for display */
+	pinctrl_bl: blgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT	0x16
+		>;
+	};
+
+	pinctrl_dvdd: dvddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x16	/* VDD 3V3_VO3 */
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29	0x16	/* panel reset */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts
new file mode 100644
index 000000000000..6f9b82958b96
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 DimOnOff
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som-symphony.dts"
+
+/ {
+	model = "DimOnOff Gateway EVK board";
+	compatible = "dimonoff,gateway-evk", "variscite,var-som-mx8mn",
+		     "fsl,imx8mn";
+
+	/*
+	 * U30 FPF2193 regulator.
+	 * Source = BASE_PER_3V3 = SOM_3V3 (COM pin 49).
+	 */
+	reg_disp_3v3: regulator-disp-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "Display 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-enter {
+			label = "enter";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			wakeup-source;
+		};
+	};
+
+	/* Bourns PEC12R rotary encoder, 24 steps. */
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rotary>;
+		gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, /* A */
+			<&gpio5 13 GPIO_ACTIVE_LOW>; /* B */
+		linux,axis = <0>; /* REL_X */
+		rotary-encoder,encoding = "gray";
+		rotary-encoder,relative-axis;
+	};
+};
+
+/* Disable Asynchronous Sample Rate Converter (audio) */
+&easrc {
+	status = "disabled";
+};
+
+&ecspi1 {
+	/* Resistive touch controller */
+	/delete-node/ touchscreen@0;
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c2 {
+	adc@48 {
+		compatible = "ti,ads7924";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adc>;
+		vref-supply = <&reg_disp_3v3>;
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {
+			reg = <0>;
+			label = "Pot0";
+		};
+		channel@1 {
+			reg = <1>;
+			label = "Pot1";
+		};
+		channel@2 {
+			reg = <2>;
+			label = "Pot2";
+		};
+		channel@3 {
+			reg = <3>;
+			label = "Pot3";
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+		reset-source; /* For watchdog. */
+	};
+
+	rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reset-source; /* For watchdog. */
+		interrupt-parent = <&gpio5>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* J17.6 on EVK */
+	};
+};
+
+&i2c3 {
+	touchscreen@38 {
+		status = "disabled";
+	};
+
+	codec@1a {
+		status = "disabled";
+	};
+
+	/* DS1337 RTC module */
+	rtc@68 {
+		status = "disabled";
+	};
+};
+
+&sai5 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0xc6
+		>;
+	};
+
+	pinctrl_rotary: rotarygrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x00000156
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x00000156
+		>;
+	};
+
+	pinctrl_adc: adcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x00000156
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10	0x00000156
+			MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x00000156
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 3f6a19839c9e..a0e13d3324ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -221,12 +221,6 @@
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 
-		port {
-			typec1_dr_sw: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-
 		typec1_con: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -238,6 +232,12 @@
 				     PDO_VAR(5000, 20000, 3000)>;
 			op-sink-microwatt = <15000000>;
 			self-powered;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi
new file mode 100644
index 000000000000..5d03fb893e90
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu {
+	assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>,
+			  <&clk IMX8MN_CLK_GPU_SHADER>,
+			  <&clk IMX8MN_CLK_GPU_AXI>,
+			  <&clk IMX8MN_CLK_GPU_AHB>,
+			  <&clk IMX8MN_GPU_PLL>;
+	assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+				  <&clk IMX8MN_GPU_PLL_OUT>,
+				  <&clk IMX8MN_SYS_PLL1_800M>,
+				  <&clk IMX8MN_SYS_PLL1_800M>;
+	assigned-clock-rates = <600000000>,
+			       <600000000>,
+			       <800000000>,
+			       <400000000>,
+			       <1200000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts
new file mode 100644
index 000000000000..1b633bd1ebb6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 DimOnOff
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som.dtsi"
+
+/ {
+	model = "RVE gateway";
+	compatible = "rve,rve-gateway", "variscite,var-som-mx8mn", "fsl,imx8mn";
+
+	crystal_duart_24m: crystal-duart-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-enter {
+			label = "enter";
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+		};
+
+		key-exit {
+			label = "exit";
+			gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ESC>;
+		};
+	};
+
+	lcd {
+		compatible = "hit,hd44780";
+		display-height-chars = <2>;
+		display-width-chars = <20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+		data-gpios = <&gpio5  1 GPIO_ACTIVE_HIGH>,
+			     <&gpio1  6 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 14 GPIO_ACTIVE_HIGH>,
+			     <&gpio4 28 GPIO_ACTIVE_HIGH>,
+			     <&gpio5 24 GPIO_ACTIVE_HIGH>,
+			     <&gpio5  2 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 12 GPIO_ACTIVE_HIGH>,
+			     <&gpio5 25 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Bourns PEC12R rotary encoder, 24 steps. */
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rotary>;
+		gpios = <&gpio1  5 GPIO_ACTIVE_LOW>, /* A */
+			<&gpio3 21 GPIO_ACTIVE_LOW>; /* B */
+		linux,axis = <0>; /* REL_X */
+		rotary-encoder,encoding = "gray";
+		rotary-encoder,relative-axis;
+	};
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+
+	duart1: serial@0 {
+		compatible = "nxp,sc16is752";
+		reg = <0>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		spi-max-frequency = <4000000>;
+		clocks = <&crystal_duart_24m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "RADIO0", "RADIO1", "RADIO2", "RADIO3",
+				  "RADIO4", "RADIO_RESET", "TP12", "TP11";
+		linux,rs485-enabled-at-boot-time;
+		rs485-rts-active-low;
+	};
+
+	/delete-node/ touchscreen@0;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	status = "okay";
+
+	duart2: serial@0 {
+		compatible = "nxp,sc16is752";
+		reg = <0>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		spi-max-frequency = <4000000>;
+		clocks = <&crystal_duart_24m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_USER", "LED_R_USER", "LED_G_USER",
+				  "GPIO_EXT3", "GPIO_EXT2", "GPIO_EXT1",
+				  "GPIO_EXT0", "TP13";
+		linux,rs485-enabled-at-boot-time;
+		rs485-rts-active-low;
+	};
+};
+
+/* Configure PWM pins in GPIO mode: */
+&gpio5 {
+	gpio-line-names = "", "", "", "PWM3", "PWM2", "PWM1";
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	/* Carrier board EEPROM */
+	eeprom_cb: eeprom@56 {
+		compatible = "atmel,24c04";
+		reg = <0x56>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3p3v>;
+	};
+
+	lm75: sensor@48 {
+		compatible = "st,stlm75";
+		reg = <0x48>;
+		vs-supply = <&reg_3p3v>;
+	};
+
+	mcp7940: rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&i2c3 {
+	codec@1a {
+		status = "disabled";
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pcf8574_1: gpio@38 {
+		compatible = "nxp,pcf8574";
+		reg = <0x38>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_COMM3", "LED_R_COMM3", "LED_G_COMM3",
+				  "TP14", "TP15", "LED_G_COMM4", "LED_R_COMM4",
+				  "LED_B_COMM4";
+	};
+
+	pcf8574_2: gpio@39 {
+		compatible = "nxp,pcf8574";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_COMM2", "LED_G_COMM2", "LED_B_COMM1",
+				  "LED_R_COMM2", "LED_R_COMM1", "LED_G_COMM1",
+				  "TP16", "TP17";
+	};
+};
+
+/* Bluetooth */
+&uart2 {
+	status = "disabled";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* SD interface on expansion connector. */
+&usdhc2 {
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x13
+			MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x13
+			MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x13
+			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x13 /* SS0 */
+			MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x13 /* SC16 IRQ */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x13
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x13
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x13
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x13 /* SS0 */
+			MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20	0x13 /* SC16 IRQ */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1	0xc6 /* Enter */
+			MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23	0xc6 /* Exit */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1		0x00000156 /* D0 */
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x00000156 /* D1 */
+			MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x00000156 /* D2 */
+			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x00000156 /* D3 */
+			MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24	0x00000156 /* D4 */
+			MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x00000156 /* D5 */
+			MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x00000156 /* D6 */
+			MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25	0x00000156 /* D7 */
+			MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23	0x00000156 /* E */
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x00000156 /* RS */
+			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x00000156 /* R/W */
+		>;
+	};
+
+	pinctrl_rotary: rotarygrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x00000156 /* A */
+			MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x00000156 /* B */
+		>;
+	};
+
+	/* Override Card Detect function GPIO value (GPIO1_IO10) from SOM: */
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
index 3f1e49bfe38f..c07d59147ab5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx";
 	compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
index a7a57442cb81..a6b94d1957c9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
@@ -57,6 +57,15 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	/* Peripherals supply, enabled by Q2 after SOM_3V3 rises. */
+	reg_per_3v3: regulator-peripheral-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "per_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &ethphy {
@@ -79,6 +88,7 @@
 		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 		#gpio-cells = <2>;
 		wakeup-source;
+		vcc-supply = <&reg_per_3v3>;
 
 		/* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
 		usb3-sata-sel-hog {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index b8946edf317b..b364307868f2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -31,6 +31,14 @@
 		gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	reg_3v3_fixed: regulator-3v3-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &A53_0 {
@@ -234,6 +242,7 @@
 		compatible = "atmel,24c04";
 		reg = <0x52>;
 		pagesize = <16>;
+		vcc-supply = <&reg_3v3_fixed>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 1bb1d0c1bae4..136e75c51251 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -637,6 +637,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mn-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
index 0bea0798d2db..a08057410bde 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -94,6 +94,17 @@
 		};
 	};
 
+	bridge-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -153,6 +164,21 @@
 		enable-active-high;
 	};
 
+	sound-adv7535 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-adv7535";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&adv_bridge>;
+		};
+	};
+
 	sound-dmic {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "sound-pdm";
@@ -208,7 +234,7 @@
 	status = "okay";
 
 	tpm: tpm@0 {
-		compatible = "infineon,slb9670";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tpm>;
@@ -274,6 +300,35 @@
 		#interrupt-cells = <2>;
 	};
 
+	adv_bridge: hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+		reg-names = "main", "cec", "edid", "packet";
+		adi,dsi-lanes = <4>;
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+
 	pcieclk: clock-generator@68 {
 		compatible = "renesas,9fgv0241";
 		reg = <0x68>;
@@ -398,6 +453,10 @@
 	};
 };
 
+&lcdif1 {
+	status = "okay";
+};
+
 &micfil {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pdm>;
@@ -407,6 +466,21 @@
 	status = "okay";
 };
 
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
@@ -433,6 +507,16 @@
 	status = "okay";
 };
 
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -612,6 +696,14 @@
 		>;
 	};
 
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC	0xd6
+		>;
+	};
+
 	pinctrl_tpm: tpmgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19 /* Reset */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index d98a040860a4..5828c9d7821d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -486,7 +486,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
+	status = "disabled";
 };
 
 &usb3_phy0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
index 267ceffc02d8..2c19766ebf09 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -75,7 +75,7 @@
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
-	phy-connection-type = "rgmii-id";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
index 0afd90224a59..b11d694b98e1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
@@ -63,6 +63,50 @@
 		regulator-always-on;
 	};
 
+	reg_csi1_1v8: regulator-csi1-vdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "CSI1_VDD1V8";
+		gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_baseboard_vdd3v3>;
+	};
+
+	reg_csi1_3v3: regulator-csi1-vdd3v3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "CSI1_VDD3V3";
+		gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vdd5v0>;
+	};
+
+	reg_csi2_1v8: regulator-csi2-vdd1v8 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_csi2_1v8>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "CSI2_VDD1V8";
+		gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_baseboard_vdd3v3>;
+	};
+
+	reg_csi2_3v3: regulator-csi2-vdd3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_csi2_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "CSI2_VDD3V3";
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vdd5v0>;
+	};
+
 	regulator-vbus-usb20 {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <5000000>;
@@ -413,6 +457,18 @@
 		>;
 	};
 
+	pinctrl_reg_csi2_1v8: regcsi21v8grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x19
+		>;
+	};
+
+	pinctrl_reg_csi2_3v3: regcsi23v3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x19
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x14f
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
index bc312aa1bfc8..91094c227744 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
@@ -6,6 +6,8 @@
 
 #include "imx8mp.dtsi"
 
+#include <dt-bindings/leds/common.h>
+
 / {
 	model = "Polyhex i.MX8MPlus Debix SOM A";
 	compatible = "polyhex,imx8mp-debix-som-a", "fsl,imx8mp";
@@ -20,6 +22,20 @@
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
 };
 
 &A53_0 {
@@ -203,6 +219,12 @@
 };
 
 &iomuxc {
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16		0x19
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c2
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index d8963f32ec84..43f1d45ccc96 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -255,7 +255,7 @@
 				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-rates = <13000000>, <13000000>, <156000000>;
-		reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 
 		ports {
@@ -420,6 +420,18 @@
 		reg = <0x53>;
 	};
 
+	eeprom0wl: eeprom@58 {
+		compatible = "atmel,24c32d-wl";	/* M24C32-D WL page of 0x50 */
+		pagesize = <32>;
+		reg = <0x58>;
+	};
+
+	eeprom1wl: eeprom@5b {
+		compatible = "atmel,24c32d-wl";	/* M24C32-D WL page of 0x53 */
+		pagesize = <32>;
+		reg = <0x5b>;
+	};
+
 	ioexp: gpio@74 {
 		compatible = "nxp,pca9539";
 		reg = <0x74>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index cc9d468b43ab..f87fa5a948cc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -137,6 +137,28 @@
 		};
 
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_vdev0vring0: vdev0vring0@942f0000 {
+			reg = <0 0x942f0000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0vring1: vdev0vring1@942f8000 {
+			reg = <0 0x942f8000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0buffer: vdev0buffer@94300000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x94300000 0 0x100000>;
+			no-map;
+		};
+	};
 };
 
 &flexspi {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
index e4215c83ee0f..da4b1807c275 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -57,8 +57,8 @@
 		clocks = <&clk IMX8MP_CLK_CLKOUT1>;
 		#sound-dai-cells = <0>;
 
-		VDDA-supply  = <&reg_vcc_3v3_audio>;
-		VDDD-supply  = <&reg_vcc_1v8_audio>;
+		VDDA-supply = <&reg_vcc_3v3_audio>;
+		VDDD-supply = <&reg_vcc_1v8_audio>;
 		VDDIO-supply = <&reg_vcc_1v8_audio>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
new file mode 100644
index 000000000000..59813ef8e2bb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
@@ -0,0 +1,711 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "imx8mp.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		/* some of this aliases like backlight0, ethernetX and switch0
+		 * are needed for the bootloader.
+		 */
+		backlight0 = &backlight;
+		ethernet0 = &eqos;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+		switch0 = &switch;
+	};
+
+	/*
+	 * Backlight is present only on some of boards, so it is disabled by
+	 * default.
+	 */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 20000 0>;
+		power-supply = <&reg_24v>;
+		enable-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			label = "D1";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "D2";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "D3";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_1v2: regulator-1v2 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_p>;
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_s>;
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_s>;
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/*
+	 * This regulator will provide power as long as possible even if
+	 * undervoltage is detected.
+	 */
+	reg_5v_p: regulator-5v-p {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_P";
+		vin-supply = <&reg_24v>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/*
+	 * This regulator will be automatically shutdown if undervoltage is
+	 * detected.
+	 */
+	reg_5v_s: regulator-5v-s {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_S";
+		vin-supply = <&reg_24v>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_24v: regulator-24v {
+		compatible = "regulator-fixed";
+		regulator-name = "24V";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+	};
+
+	reg_can2rs: regulator-can2rs {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN2RS";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can2rs>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_canrs: regulator-canrs {
+		compatible = "regulator-fixed";
+		regulator-name = "CANRS";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_canrs>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_tft_vcom: regulator-tft-vcom {
+		compatible = "pwm-regulator";
+		pwms = <&pwm4 0 20000 0>;
+		regulator-name = "VCOM";
+		vin-supply = <&reg_5v_s>;
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-always-on;
+		voltage-table = <3600000 26>;
+		status = "disabled";
+	};
+
+	reg_vsd_3v3: regulator-vsd-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
+		vin-supply = <&reg_vdd_3v3>;
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc: adc@0 {
+		compatible = "microchip,mcp3002";
+		reg = <0>;
+		vref-supply = <&reg_vdd_3v3>;
+		spi-max-frequency = <1000000>;
+		#io-channel-cells = <1>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-txid";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_canrs>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2rs>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupts-extended = <&gpio1 3 IRQ_TYPE_EDGE_RISING>;
+		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-name = "VDD_SOC";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram_1v1: BUCK6 {
+				regulator-name = "NVCC_DRAM_1V1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs_1v8: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda_1v8: LDO3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd2: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	i2c_rtc: rtc@51 {
+		compatible = "nxp,pcf85063tp";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio4 31 IRQ_TYPE_EDGE_FALLING>;
+		quartz-load-femtofarads = <12500>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <380000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	switch: switch@5f {
+		compatible = "microchip,ksz9893";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_switch>;
+		reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+		reg = <0x5f>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan1: port@0 {
+				reg = <0>;
+				phy-mode = "internal";
+				label = "lan1";
+			};
+
+			lan2: port@1 {
+				reg = <1>;
+				phy-mode = "internal";
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "cpu";
+				ethernet = <&eqos>;
+				phy-mode = "rgmii";
+				/* 2ns RX delay is implemented on PCB */
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <0>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+/* SD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	vqmmc-supply = <&reg_nvcc_sd2>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24			0x0100
+		>;
+	};
+
+	pinctrl_can2rs: can2rsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22			0x154
+		>;
+	};
+
+	pinctrl_canrs: canrsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21			0x154
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK			0x44
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI			0x44
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO			0x44
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13			0x40
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX				0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX				0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX				0x154
+			MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX				0x154
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05			0x19
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06			0x19
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07			0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL				0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA				0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03			0x41
+			MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04			0x41
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT			0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT			0x116
+		>;
+	};
+
+	pinctrl_reg_vsd_3v3: regvsd3v3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31			0x41
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00			0x41
+			MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01			0x41
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			/* external 10 k pull up */
+			/* CTP_INT */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28			0x41
+			/* CTP_RST */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29			0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX			0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX			0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS			0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX			0x14f
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX			0x14f
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12			0x1c4
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20				0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B			0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
new file mode 100644
index 000000000000..c1ca69da3cb8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - HDMI";
+	compatible = "skov,imx8mp-skov-revb-hdmi", "fsl,imx8mp";
+};
+
+&iomuxc {
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL		0x1c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA		0x1c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD			0x19
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
new file mode 100644
index 000000000000..ccbd3abedd69
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - LT6";
+	compatible = "skov,imx8mp-skov-revb-lt6", "fsl,imx8mp";
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <65000>;
+		touchscreen-inverted-y;
+		touchscreen-swapped-x-y;
+		touchscreen-x-plate-ohms = <300>;
+	};
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3600000>;
+	regulator-max-microvolt = <3600000>;
+	voltage-table = <3600000 26>;
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touch>;
+		pinctrl-names ="default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK			0x44
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI			0x44
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO			0x44
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09			0x40
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* external pull up */
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25			0x40
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
new file mode 100644
index 000000000000..3c2efdc59bfa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - MI1010AIT-1CP1";
+	compatible = "skov,imx8mp-skov-revb-mi1010ait-1cp1", "fsl,imx8mp";
+
+	panel {
+		compatible = "multi-inno,mi1010ait-1cp";
+		backlight = <&backlight>;
+		power-supply = <&reg_tft_vcom>;
+
+		port {
+			in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+		vcc-supply = <&reg_vdd_3v3>;
+		iovcc-supply = <&reg_vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	/* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
+	assigned-clock-rates = <482300000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&in_lvds0>;
+			};
+		};
+	};
+};
+
+&media_blk_ctrl {
+	/* currently it is not possible to let display clocks confugure
+	 * automatically, so we need to set them manually
+	 */
+	assigned-clock-rates = <500000000>, <200000000>, <0>,
+		/* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
+		<68900000>,
+		/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
+		<964600000>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA				0x400001c2
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso
new file mode 100644
index 000000000000..5058cd9409c7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+&{/} {
+	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&display {
+	compatible = "auo,g133han01";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dual-lvds-odd-pixels;
+
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dual-lvds-even-pixels;
+
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	assigned-clock-rates = <0>, <988400000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 4240e20d38ac..86d3da36e4f3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -15,6 +15,7 @@
 / {
 	model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
 	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+	chassis-type = "embedded";
 
 	chosen {
 		stdout-path = &uart4;
@@ -55,6 +56,21 @@
 		clock-frequency = <25000000>;
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X29";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon0>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	fan0: pwm-fan {
 		compatible = "pwm-fan";
 		pinctrl-names = "default";
@@ -168,6 +184,13 @@
 		enable-active-high;
 	};
 
+	reg_vcc_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_vcc_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
@@ -464,7 +487,7 @@
 		clock-names = "mclk";
 		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
 		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
-		iov-supply = <&reg_vcc_3v3>;
+		iov-supply = <&reg_vcc_1v8>;
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
@@ -602,7 +625,6 @@
 &usb3_1 {
 	fsl,disable-port-power-control;
 	fsl,permanently-attached;
-	dr_mode = "host";
 	status = "okay";
 };
 
@@ -626,13 +648,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		label = "X29";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon0>;
-		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
index bf47b5e9dd8c..0e8d0f3c7ea8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
@@ -8,6 +8,21 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -132,13 +147,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "Type-C";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
index f942e949084b..41c79d2ebdd6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -8,6 +8,21 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -83,8 +98,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio4 {
@@ -175,13 +197,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "otg";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
@@ -285,6 +304,7 @@
 			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
 			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
 			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
index b0d42b18c5ce..d5c400b355af 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -8,6 +8,21 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -100,7 +115,7 @@
 	status = "okay";
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
 		spi-max-frequency = <36000000>;
 	};
@@ -201,13 +216,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "otg";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index 2ab9f4cc12cc..cae586cd45bd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -35,6 +35,21 @@
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
 
+	connector {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -181,9 +196,7 @@
 	status = "okay";
 
 	tpm@0 {
-		compatible = "tcg,tpm_tis-spi";
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x0>;
 		spi-max-frequency = <36000000>;
 	};
@@ -694,13 +707,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		label = "Type-C";
-		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi
new file mode 100644
index 000000000000..8482393f3cac
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin IMX8MP SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio3 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* EEPROM on Mallow */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&eqos {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* Temperature sensor on Mallow */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00	0x106>, /* SODIMM 52 */
+			<MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x106>, /* SODIMM 54 */
+			<MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x106>, /* SODIMM 56 */
+			<MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x106>; /* SODIMM 58 */
+	};
+
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x82>; /* SODIMM 64 */
+	};
+
+	pinctrl_tpm_irq: tpmirqgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x16>; /* SODIMM 66 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000000..6a536a4964bb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Mallow Board";
+	compatible = "toradex,verdin-imx8mp-nonwifi-mallow",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts
new file mode 100644
index 000000000000..08b7aef3fdde
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Mallow Board";
+	compatible = "toradex,verdin-imx8mp-wifi-mallow",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index 04f2083c4ab2..c3305f0d4001 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -45,6 +45,23 @@
 		status = "disabled";
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_1_id>;
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb1_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -835,15 +852,10 @@
 	srp-disable;
 	usb-role-switch;
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-		label = "Type-C";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_1_id>;
-		self-powered;
-		type = "micro";
-		vbus-supply = <&reg_usb1_vbus>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 1264da6012f9..39a550c1cd26 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -264,6 +264,7 @@
 		dsp_reserved: dsp@92400000 {
 			reg = <0 0x92400000 0 0x2000000>;
 			no-map;
+			status = "disabled";
 		};
 	};
 
@@ -726,6 +727,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mp-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
@@ -793,8 +796,8 @@
 							 <&clk IMX8MP_CLK_AUDIO_AXI>;
 						assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>,
 								  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>;
-						assigned-clock-parents =  <&clk IMX8MP_SYS_PLL1_800M>,
-									  <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
 						assigned-clock-rates = <400000000>,
 								       <600000000>;
 					};
@@ -887,6 +890,15 @@
 						clocks = <&clk IMX8MP_CLK_ML_AXI>,
 							 <&clk IMX8MP_CLK_ML_AHB>,
 							 <&clk IMX8MP_CLK_NPU_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
+								  <&clk IMX8MP_CLK_ML_AXI>,
+								  <&clk IMX8MP_CLK_ML_AHB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <800000000>,
+								       <800000000>,
+								       <300000000>;
 					};
 				};
 			};
@@ -1808,7 +1820,7 @@
 					compatible = "fsl,imx8mp-ldb";
 					reg = <0x5c 0x4>, <0x128 0x4>;
 					reg-names = "ldb", "lvds";
-					clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+					clocks = <&clk IMX8MP_CLK_MEDIA_LDB_ROOT>;
 					clock-names = "ldb";
 					assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
 					assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
@@ -2012,6 +2024,18 @@
 			interconnect-names = "g1", "g2", "vc8000e";
 		};
 
+		npu: npu@38500000 {
+			compatible = "vivante,gc";
+			reg = <0x38500000 0x200000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_ML_AXI>,
+				 <&clk IMX8MP_CLK_ML_AHB>;
+			clock-names = "core", "shader", "bus", "reg";
+			power-domains = <&pgc_mlmix>;
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
index 6376417e918c..d8cf1f27c3ec 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
@@ -65,7 +65,7 @@
 	status = "okay";
 
 	tpm@0 {
-		compatible = "infineon,slb9670";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <43000000>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index a3b9d615a3b4..e34045d10a12 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -39,7 +39,7 @@
 
 	fan: gpio-fan {
 		compatible = "gpio-fan";
-		gpio-fan,speed-map = <0 0 8600 1>;
+		gpio-fan,speed-map = <0 0>, <8600 1>;
 		gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
 		#cooling-cells = <2>;
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
index 0d8def2766f5..b302daca4ce6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx";
 	compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index 8439dd6b3935..69cb8676732e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -128,21 +128,25 @@
 &lpuart0 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart1 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart2 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 17 0 0>, <&edma2 16 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart3 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 19 0 0>, <&edma2 18 0 1>;
+	dma-names = "rx","tx";
 };
 
 &i2c0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 99611729943c..8360bb851ac0 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -31,7 +31,7 @@
 	};
 
 	gpio-sbu-mux {
-		compatible = "gpio-sbu-mux";
+		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec_mux>;
 		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
@@ -50,6 +50,10 @@
 	status = "okay";
 };
 
+&dsp_reserved {
+	status = "okay";
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
@@ -152,12 +156,6 @@
 		interrupt-parent = <&lsio_gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
-		port {
-			typec_dr_sw: endpoint {
-				remote-endpoint = <&usb3_drd_sw>;
-			};
-		};
-
 		usb_con1: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -169,8 +167,17 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+
+					typec_dr_sw: endpoint {
+						remote-endpoint = <&usb3_drd_sw>;
+					};
+				};
+
 				port@1 {
 					reg = <1>;
+
 					typec_con_ss: endpoint {
 						remote-endpoint = <&usb3_data_ss>;
 					};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi
new file mode 100644
index 000000000000..7894a3ab26d6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+&vpu_core0 {
+	reg = <0x2d040000 0x10000>;
+};
+
+&vpu_core1 {
+	reg = <0x2d050000 0x10000>;
+};
+
+/delete-node/ &mu2_m0;
+/delete-node/ &vpu_core2;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index c80c85a4b405..958267b33340 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -48,7 +48,6 @@
 		serial3 = &lpuart3;
 		vpu-core0 = &vpu_core0;
 		vpu-core1 = &vpu_core1;
-		vpu-core2 = &vpu_core2;
 	};
 
 	cpus {
@@ -184,6 +183,7 @@
 		dsp_reserved: dsp@92400000 {
 			reg = <0 0x92400000 0 0x2000000>;
 			no-map;
+			status = "disabled";
 		};
 
 		encoder_rpc: encoder-rpc@94400000 {
@@ -317,6 +317,7 @@
 };
 
 #include "imx8qxp-ss-img.dtsi"
+#include "imx8qxp-ss-vpu.dtsi"
 #include "imx8qxp-ss-adma.dtsi"
 #include "imx8qxp-ss-conn.dtsi"
 #include "imx8qxp-ss-lsio.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 2b9d47716f75..9921ea13ab48 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -76,6 +76,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <12000>;
 		enable-active-high;
 	};
 };
@@ -237,18 +238,19 @@
 		>;
 	};
 
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
-			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
-			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
-			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
-			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
-			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
-			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
-			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
-			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
-			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013fe
 			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
 		>;
 	};
@@ -265,14 +267,15 @@
 		>;
 	};
 
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
-			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x400013fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x400013fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x400013fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x400013fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013fe
 			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
new file mode 100644
index 000000000000..af795ecf678b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -0,0 +1,709 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx93-tqma9352.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA on MBa93xxCA starter kit";
+	compatible = "tq,imx93-tqma9352-mba93xxca",
+		     "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm5 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwmfan>;
+		fan-supply = <&reg_pwm_fan>;
+		#cooling-cells = <2>;
+		/* typical 25 kHz -> 40.000 nsec */
+		pwms = <&tpm6 0 40000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <0 32 64 128 196 240>;
+		pulses-per-revolution = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pwm_fan: regulator-pwm-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "FAN_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_12v0>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_active0: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+
+				cpu_active1: trip-active1 {
+					temperature = <48000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+
+				cpu_active2: trip-active2 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&cpu_active0>;
+					cooling-device = <&fan0 1 1>;
+				};
+
+				map2 {
+					trip = <&cpu_active1>;
+					cooling-device = <&fan0 2 2>;
+				};
+
+				map3 {
+					trip = <&cpu_active2>;
+					cooling-device = <&fan0 3 3>;
+				};
+			};
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	expander-irq-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "PEX_INT#";
+	};
+
+	tcpc-irq-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "USB_C_ALERT#";
+	};
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "FAN_PWR_EN", "MPCIE_WAKE#",
+				  "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+				  "MPCIE_PERST#", "MPCIE_WDISABLE#",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		mpcie-wake-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "MPCIE_WAKE#";
+		};
+
+		/*
+		 * Controls the mPCIE slot reset which is low active as
+		 * reset signal. The output-low states, the signal is
+		 * inactive, e.g. not in reset
+		 */
+		mpcie_rst_hog: mpcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_PERST#";
+		};
+
+		/*
+		 * Controls the mPCIE slot WDISABLE pin which is low active
+		 * as disable signal. The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		mpcie_wdisable_hog: mpcie-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_WDISABLE#";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the on board USB Hub reset which is low
+		 * active as reset signal. The output-low states, the
+		 * signal is inactive, e.g. no reset
+		 */
+		usb-reset-hog {
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "USB_RESET#";
+		};
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-high states, the signal
+		 * is active, e.g. card is powered down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-high states, the signal
+		 * is active, e.g. card is disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-high states, the signal
+		 * is active, e.g. card in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "DP_EN",
+				  "MIPI_CSI_EN", "MIPI_CSI_RST#",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpi2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5>;
+	status = "okay";
+};
+
+&lpspi6 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpspi6>;
+	pinctrl-1 = <&pinctrl_lpspi6>;
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* disabled per default, console for M33 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&lpuart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&lpuart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "okay";
+};
+
+&tpm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&tpm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm6>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC		0x51e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO		0x4000051e
+			/* PD | FSEL_2 | DSE X6 */
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2		0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3		0x57e
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x51e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x51e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2		0x51e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3		0x51e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+		>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x1306
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000051e
+			/* PD | FSEL_2 | DSE X6 */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x51e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x51e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x51e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x51e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
+		>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27		0x1306
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX		0x139e
+			MX93_PAD_GPIO_IO27__CAN2_RX		0x139e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpspi6: lpspi6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO00__LPSPI6_PCS0		0x3fe
+			MX93_PAD_GPIO_IO01__LPSPI6_SIN		0x3fe
+			MX93_PAD_GPIO_IO02__LPSPI6_SOUT		0x3fe
+			MX93_PAD_GPIO_IO03__LPSPI6_SCK		0x3fe
+		>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__GPIO1_IO12		0x1306
+		>;
+	};
+
+	pinctrl_pwmfan: pwmfangrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO09__GPIO2_IO09		0x1306
+		>;
+	};
+
+	pinctrl_tpm5: tpm5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO06__TPM5_CH0		0x57e
+		>;
+	};
+
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO08__TPM6_CH0		0x57e
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__GPIO1_IO02		0x1306
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX93_PAD_UART2_TXD__LPUART2_TX		0x31e
+			MX93_PAD_UART2_RXD__LPUART2_RX		0x31e
+			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B   0x51e
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO14__LPUART3_TX		0x31e
+			MX93_PAD_GPIO_IO15__LPUART3_RX		0x31e
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO04__LPUART6_TX		0x31e
+			MX93_PAD_GPIO_IO05__LPUART6_RX		0x31e
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO12__LPUART8_TX		0x31e
+			MX93_PAD_GPIO_IO13__LPUART8_RX		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = <
+			/* HYS | PD | PU | FSEL_3 | DSE X5 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17be
+			/* HYS | PD | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			/* HYS | PD | PU | FSEL_3 | DSE X3 */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
+			/* PD | PU | FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
+		>;
+	};
+
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = <
+			/* HYS | PD | PU | FSEL_3 | DSE X6 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17fe
+			/* HYS | PD | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
+			/* PD | PU | FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index 3c5c67ebee5d..eb3f4cfb6986 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -18,6 +18,7 @@
 	model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC";
 	compatible = "tq,imx93-tqma9352-mba93xxla",
 		     "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
 
 	chosen {
 		stdout-path = &lpuart1;
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 34c0540276d1..8f2e7c42ad6e 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -171,6 +171,18 @@
 		status = "disabled";
 	};
 
+	mqs1: mqs1 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&aonmix_ns_gpr>;
+		status = "disabled";
+	};
+
+	mqs2: mqs2 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&wakeupmix_gpr>;
+		status = "disabled";
+	};
+
 	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -282,6 +294,19 @@
 				status = "disabled";
 			};
 
+			i3c1: i3c-master@44330000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_I3C1_GATE>,
+					 <&clk IMX93_CLK_I3C1_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
 			lpi2c1: i2c@44340000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44340000 0x10000>;
@@ -367,6 +392,19 @@
 				status = "disabled";
 			};
 
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			iomuxc: pinctrl@443c0000 {
 				compatible = "fsl,imx93-iomuxc";
 				reg = <0x443c0000 0x10000>;
@@ -395,6 +433,8 @@
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
 				clock-names = "osc_32k", "osc_24m", "clk_ext1";
+				assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
+				assigned-clock-rates = <393216000>;
 				status = "okay";
 			};
 
@@ -422,9 +462,10 @@
 				};
 			};
 
-			anatop: anatop@44480000 {
-				compatible = "fsl,imx93-anatop", "syscon";
+			clock-controller@44480000 {
+				compatible = "fsl,imx93-anatop";
 				reg = <0x44480000 0x2000>;
+				#clock-cells = <1>;
 			};
 
 			tmu: tmu@44482000 {
@@ -447,6 +488,21 @@
 				#thermal-sensor-cells = <1>;
 			};
 
+			micfil: micfil@44520000 {
+				compatible = "fsl,imx93-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_PDM_IPG>,
+					 <&clk IMX93_CLK_PDM_GATE>,
+					 <&clk IMX93_CLK_AUDIO_PLL>;
+				clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
+				dmas = <&edma1 29 0 5>;
+				dma-names = "rx";
+				status = "disabled";
+			};
 
 			adc1: adc@44530000 {
 				compatible = "nxp,imx93-adc";
@@ -473,7 +529,6 @@
 				compatible = "fsl,imx93-edma4";
 				reg = <0x42000000 0x210000>;
 				#dma-cells = <3>;
-				shared-interrupt;
 				dma-channels = <64>;
 				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
@@ -616,6 +671,19 @@
 				status = "disabled";
 			};
 
+			i3c2: i3c-master@42520000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_I3C2_GATE>,
+					 <&clk IMX93_CLK_I3C2_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
 			lpi2c3: i2c@42530000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42530000 0x10000>;
@@ -738,6 +806,51 @@
 				status = "disabled";
 			};
 
+			sai2: sai@42650000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 59 0 1>, <&edma2 58 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai3: sai@42660000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 61 0 1>, <&edma2 60 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			xcvr: xcvr@42680000 {
+				compatible = "fsl,imx93-xcvr";
+				reg = <0x42680000 0x800>,
+				      <0x42680800 0x400>,
+				      <0x42680c00 0x080>,
+				      <0x42680e00 0x080>;
+				reg-names = "ram", "regs", "rxfifo", "txfifo";
+				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_SPDIF_GATE>,
+					 <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
+				clock-names = "ipg", "phy", "spba", "pll_ipg";
+				dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			lpuart7: serial@42690000 {
 				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42690000 0x1000>;
@@ -755,7 +868,7 @@
 				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
 				clock-names = "ipg";
-				dmas =  <&edma2 90 0 1>, <&edma2 89 0 0>;
+				dmas = <&edma2 90 0 1>, <&edma2 89 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -874,7 +987,7 @@
 					 <&clk IMX93_CLK_USDHC1_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <8>;
-				fsl,tuning-start-tap = <20>;
+				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
@@ -888,7 +1001,7 @@
 					 <&clk IMX93_CLK_USDHC2_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
-				fsl,tuning-start-tap = <20>;
+				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
@@ -951,7 +1064,7 @@
 					 <&clk IMX93_CLK_USDHC3_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
-				fsl,tuning-start-tap = <20>;
+				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
index 970047f2dabd..299c4ab630e8 100644
--- a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -10,10 +10,9 @@
 / {
 	spmi: spmi@fff24000 {
 		compatible = "hisilicon,kirin970-spmi-controller";
+		reg = <0x0 0xfff24000 0x0 0x1000>;
 		#address-cells = <2>;
 		#size-cells = <0>;
-		status = "okay";
-		reg = <0x0 0xfff24000 0x0 0x1000>;
 		hisilicon,spmi-channel = <2>;
 
 		pmic: pmic@0 {
@@ -25,9 +24,6 @@
 			gpios = <&gpio28 0 0>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ldo3: ldo3 { /* HDMI */
 					regulator-name = "ldo3";
 					regulator-min-microvolt = <1500000>;
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index d3adb6a130ae..76aafa172eb0 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -60,6 +60,25 @@
 		};
 	};
 
+	firmware {
+		svc {
+			compatible = "intel,agilex-svc";
+			method = "smc";
+			memory-region = <&service_reserved>;
+
+			fpga_mgr: fpga-mgr {
+				compatible = "intel,agilex-soc-fpga-mgr";
+			};
+		};
+	};
+
+	fpga-region {
+		compatible = "fpga-region";
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		fpga-mgr = <&fpga_mgr>;
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
@@ -130,7 +149,7 @@
 		compatible = "usb-nop-xceiv";
 	};
 
-	soc {
+	soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -138,13 +157,6 @@
 		interrupt-parent = <&intc>;
 		ranges = <0 0 0 0xffffffff>;
 
-		base_fpga_region {
-			#address-cells = <0x2>;
-			#size-cells = <0x2>;
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-
 		clkmgr: clock-controller@ffd10000 {
 			compatible = "intel,agilex-clkmgr";
 			reg = <0xffd10000 0x1000>;
@@ -368,7 +380,7 @@
 			pinctrl-single,function-mask = <0x0000000f>;
 		};
 
-		pinctrl1: pinconf@ffd13100 {
+		pinctrl1: pinctrl@ffd13100 {
 			compatible = "pinctrl-single";
 			#pinctrl-cells = <1>;
 			reg = <0xffd13100 0x20>;
@@ -659,17 +671,5 @@
 
 			status = "disabled";
 		};
-
-		firmware {
-			svc {
-				compatible = "intel,agilex-svc";
-				method = "smc";
-				memory-region = <&service_reserved>;
-
-				fpga_mgr: fpga-mgr {
-					compatible = "intel,agilex-soc-fpga-mgr";
-				};
-			};
-		};
 	};
 };
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
index dcdaf7064953..d66d425e45b7 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -73,7 +73,7 @@
 		ranges;
 		#interrupt-cells = <3>;
 		#address-cells = <2>;
-		#size-cells =<2>;
+		#size-cells = <2>;
 		interrupt-controller;
 		#redistributor-regions = <1>;
 		redistributor-stride = <0x0 0x20000>;
@@ -315,7 +315,7 @@
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
 			dmas = <&dmac0 2>, <&dmac0 3>;
-			dma-names ="tx", "rx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 
 		};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
index 1a32840c74e0..d22de06e9839 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
@@ -26,7 +26,7 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
-	soc {
+	soc@0 {
 		bus@80000000 {
 			compatible = "simple-bus";
 			reg = <0x80000000 0x60000000>,
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
index 053690657675..ad99aefeb185 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -113,8 +113,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <2>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
index 5ddfdff37c25..2d70a92c2090 100644
--- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
@@ -25,12 +25,11 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
-	soc {
+	soc@0 {
 		sdram_edac: memory-controller@f87f8000 {
 			compatible = "snps,ddrc-3.80a";
 			reg = <0xf87f8000 0x400>;
 			interrupts = <0 175 4>;
-			status = "okay";
 		};
 	};
 };
@@ -91,8 +90,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <2>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index 48ec4ebec0a8..b864ffa74ea8 100644
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -126,7 +126,6 @@
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
index 3869460aa5dc..996fb39bb50c 100644
--- a/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -126,7 +126,6 @@
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 79ac09b58a89..99b8cb3c49e1 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -26,4 +26,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
diff --git a/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts
new file mode 100644
index 000000000000..2a0b07000089
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * Utilizing the CN913x COM Express CPU module board.
+ * This specific carrier board in this mode of operation (external)
+ * only maintains a PCIe link with the CPU module,
+ * which does not require any special DTS definitions.
+ *
+ * AC5X RD works here in external mode (switch selectable at the back of the
+ * board), and connect via an external cable a kit
+ * which would allow it to use an external CN9131 CPU COM Express module,
+ * mounted on top of an interposer kit.
+ *
+ * So in this case, once the switch is set to external mode as explained above,
+ * the AC5X RD becomes part of the carrier solution.
+ *
+ * When the board boots in the external CPU mode, the internal CPU is disabled,
+ * and only the switch portion of the SOC acts as a PCIe end-point, Hence there
+ * is no need to describe this internal (disabled CPU) in the device tree.
+ *
+ * There is no CPU booting in this mode on the carrier, only on the
+ * CN9131 COM Express CPU module.
+ * What runs the Linux is the CN9131 on the COM Express CPU module,
+ * And it accesses the switch end-point on the AC5X RD portion of the carrier
+ * via PCIe.
+ */
+
+#include "cn9131-db-comexpress.dtsi"
+#include "ac5x-rd-carrier.dtsi"
+
+/ {
+	model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board with CN9131 CPU module";
+	compatible = "marvell,cn9131-ac5x-carrier", "marvell,rd-ac5x-carrier",
+			"marvell,cn9131-cpu-module", "marvell,cn9131",
+			"marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x2 0x00000000>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
new file mode 100644
index 000000000000..f98629abb58b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * This specific board in external mode (see below) only maintains
+ * a PCIe link with the COM Express CPU module, which does not
+ * require any special DTS definitions.
+ *
+ * AC5X RD can either work as you would expect, as a complete standalone
+ * box using the internal CPU, or you can move the switch on the back of
+ * the box to "external" mode, and connect via an external cable a kit
+ * which would allow it to use an external CPU COM Express module,
+ * mounted on top of an interposer kit.
+ *
+ * So in this case, once the switch is set to external mode as explained above,
+ * the AC5X RD becomes part of the carrier solution.
+ * This is a development/reference solution, not a full commercial solution,
+ * hence it was designed with the flexibility to be configured in different
+ * modes of operation.
+ *
+ * When the board boots in the external CPU mode, the internal CPU is disabled,
+ * and only the switch portion of the SOC acts as a PCIe end-point, Hence there
+ * is no need to describe this internal (disabled CPU) in the device tree.
+ *
+ * There is no CPU booting in this mode on the carrier,
+ * only on the COM Express CPU module.
+ */
+
+/ {
+	model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board";
+	compatible = "marvell,rd-ac5x-carrier";
+
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
index f9abef8dcc94..870bb380a40a 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
@@ -126,32 +126,32 @@
 
 	reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
 
-	ports {
-		switch0port1: port@1 {
+	ethernet-ports {
+		switch0port1: ethernet-port@1 {
 			reg = <1>;
 			label = "lan0";
 			phy-handle = <&switch0phy0>;
 		};
 
-		switch0port2: port@2 {
+		switch0port2: ethernet-port@2 {
 			reg = <2>;
 			label = "lan1";
 			phy-handle = <&switch0phy1>;
 		};
 
-		switch0port3: port@3 {
+		switch0port3: ethernet-port@3 {
 			reg = <3>;
 			label = "lan2";
 			phy-handle = <&switch0phy2>;
 		};
 
-		switch0port4: port@4 {
+		switch0port4: ethernet-port@4 {
 			reg = <4>;
 			label = "lan3";
 			phy-handle = <&switch0phy3>;
 		};
 
-		switch0port5: port@5 {
+		switch0port5: ethernet-port@5 {
 			reg = <5>;
 			label = "wan";
 			phy-handle = <&extphy>;
@@ -160,7 +160,7 @@
 	};
 
 	mdio {
-		switch0phy3: switch0phy3@14 {
+		switch0phy3: ethernet-phy@14 {
 			reg = <0x14>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
index 49cbdb55b4b3..fed2dcecb323 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -145,19 +145,17 @@
 };
 
 &mdio {
-	switch0: switch0@1 {
+	switch0: ethernet-switch@1 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <1>;
 
 		dsa,member = <0 0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0port0: port@0 {
+			switch0port0: ethernet-port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
@@ -168,19 +166,19 @@
 				};
 			};
 
-			switch0port1: port@1 {
+			switch0port1: ethernet-port@1 {
 				reg = <1>;
 				label = "wan";
 				phy-handle = <&switch0phy0>;
 			};
 
-			switch0port2: port@2 {
+			switch0port2: ethernet-port@2 {
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
 			};
 
-			switch0port3: port@3 {
+			switch0port3: ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;
@@ -192,13 +190,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
index b1b45b4fa9d4..63fbc8352161 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -152,31 +152,29 @@
 };
 
 &mdio {
-	switch0: switch0@1 {
+	switch0: ethernet-switch@1 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <1>;
 
 		dsa,member = <0 0>;
 
-		ports: ports {
+		ports: ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "wan";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
@@ -185,7 +183,7 @@
 				nvmem-cell-names = "mac-address";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;
@@ -199,13 +197,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 9eab2bb22134..f1a9f2234359 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -130,7 +130,7 @@
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 		interrupt-parent = <&gpiosb>;
-		interrupts = <5 0>; /* GPIO2_5 */
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */
 	};
 };
 
@@ -304,9 +304,15 @@
 		reg = <1>;
 	};
 
-	/* switch nodes are enabled by U-Boot if modules are present */
+	/*
+	 * NOTE: switch nodes are enabled by U-Boot if modules are present
+	 * DO NOT change this node name (switch0@10) even if it is not following
+	 * conventions! Deployed U-Boot binaries are explicitly looking for
+	 * this node in order to augment the device tree!
+	 * Also do not touch the "ports" or "port@n" nodes. These are also ABI.
+	 */
 	switch0@10 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x10>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -317,35 +323,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -430,8 +436,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch0@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -442,19 +449,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1_topaz: switch0phy1@11 {
+			switch0phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy2_topaz: switch0phy2@12 {
+			switch0phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy3_topaz: switch0phy3@13 {
+			switch0phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy4_topaz: switch0phy4@14 {
+			switch0phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
@@ -497,8 +504,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch1@11 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x11>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -509,35 +517,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1phy1: switch1phy1@1 {
+			switch1phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch1phy2: switch1phy2@2 {
+			switch1phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch1phy3: switch1phy3@3 {
+			switch1phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch1phy4: switch1phy4@4 {
+			switch1phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch1phy5: switch1phy5@5 {
+			switch1phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch1phy6: switch1phy6@6 {
+			switch1phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch1phy7: switch1phy7@7 {
+			switch1phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch1phy8: switch1phy8@8 {
+			switch1phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -622,8 +630,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch1@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -634,19 +643,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1phy1_topaz: switch1phy1@11 {
+			switch1phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch1phy2_topaz: switch1phy2@12 {
+			switch1phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch1phy3_topaz: switch1phy3@13 {
+			switch1phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch1phy4_topaz: switch1phy4@14 {
+			switch1phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
@@ -689,8 +698,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch2@12 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x12>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
@@ -701,35 +711,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2phy1: switch2phy1@1 {
+			switch2phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch2phy2: switch2phy2@2 {
+			switch2phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch2phy3: switch2phy3@3 {
+			switch2phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch2phy4: switch2phy4@4 {
+			switch2phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch2phy5: switch2phy5@5 {
+			switch2phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch2phy6: switch2phy6@6 {
+			switch2phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch2phy7: switch2phy7@7 {
+			switch2phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch2phy8: switch2phy8@8 {
+			switch2phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -805,8 +815,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch2@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
@@ -817,19 +828,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2phy1_topaz: switch2phy1@11 {
+			switch2phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch2phy2_topaz: switch2phy2@12 {
+			switch2phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch2phy3_topaz: switch2phy3@13 {
+			switch2phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch2phy4_topaz: switch2phy4@14 {
+			switch2phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
index 48202810bf78..40b7ee7ead72 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -301,10 +301,8 @@
 	};
 
 	/* 88E6141 Topaz switch */
-	switch: switch@3 {
+	switch: ethernet-switch@3 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <3>;
 
 		pinctrl-names = "default";
@@ -314,35 +312,35 @@
 		interrupt-parent = <&cp0_gpio1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			swport1: port@1 {
+			swport1: ethernet-port@1 {
 				reg = <1>;
 				label = "lan0";
 				phy-handle = <&swphy1>;
 			};
 
-			swport2: port@2 {
+			swport2: ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&swphy2>;
 			};
 
-			swport3: port@3 {
+			swport3: ethernet-port@3 {
 				reg = <3>;
 				label = "lan2";
 				phy-handle = <&swphy3>;
 			};
 
-			swport4: port@4 {
+			swport4: ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&swphy4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp0_eth1>;
@@ -355,19 +353,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			swphy1: swphy1@17 {
+			swphy1: ethernet-phy@17 {
 				reg = <17>;
 			};
 
-			swphy2: swphy2@18 {
+			swphy2: ethernet-phy@18 {
 				reg = <18>;
 			};
 
-			swphy3: swphy3@19 {
+			swphy3: ethernet-phy@19 {
 				reg = <19>;
 			};
 
-			swphy4: swphy4@20 {
+			swphy4: ethernet-phy@20 {
 				reg = <20>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 4125202028c8..67892f0d2863 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -497,42 +497,42 @@
 		reset-deassert-us = <10000>;
 	};
 
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_switch_reset_pins>;
 		reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan2";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan4";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp1_eth2>;
@@ -545,19 +545,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy3: switch0phy3@14 {
+			switch0phy3: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 2c920e22cec2..7ec7c789d87e 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -138,7 +138,6 @@
 
 			odmi: odmi@300000 {
 				compatible = "marvell,odmi-controller";
-				interrupt-controller;
 				msi-controller;
 				marvell,odmi-frames = <4>;
 				reg = <0x300000 0x4000>,
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 47d45ff3d6f5..6fcc34f7b464 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -207,11 +207,9 @@
 		reg = <0>;
 	};
 
-	switch6: switch0@6 {
+	switch6: ethernet-switch@6 {
 		/* Actual device is MV88E6393X */
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <6>;
 		interrupt-parent = <&cp0_gpio1>;
 		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
@@ -220,59 +218,59 @@
 
 		dsa,member = <0 0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "p1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "p2";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "p3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "p4";
 				phy-handle = <&switch0phy4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "p5";
 				phy-handle = <&switch0phy5>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				label = "p6";
 				phy-handle = <&switch0phy6>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				reg = <7>;
 				label = "p7";
 				phy-handle = <&switch0phy7>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				reg = <8>;
 				label = "p8";
 				phy-handle = <&switch0phy8>;
 			};
 
-			port@9 {
+			ethernet-port@9 {
 				reg = <9>;
 				label = "p9";
 				phy-mode = "10gbase-r";
@@ -280,7 +278,7 @@
 				managed = "in-band-status";
 			};
 
-			port@a {
+			ethernet-port@a {
 				reg = <10>;
 				ethernet = <&cp0_eth0>;
 				phy-mode = "10gbase-r";
@@ -293,35 +291,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
new file mode 100644
index 000000000000..028496ebc473
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB Com Express CPU module board.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130-DB COM EXPRESS type 7 CPU module board";
+	compatible = "marvell,cn9130-cpu-module", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+	regulator-max-microvolt = <1800000>;
+	states = <1800000 0x1 1800000 0x0>;
+	/delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+	status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+	status = "disabled";
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_eth0 {
+	status = "disabled";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	status = "disabled";
+};
+
+&cp0_mdio {
+	status = "okay";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	phy0: ethernet-phy@0 {
+		status = "okay";
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_ge_mdio_pins: ge-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+	};
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_spi1 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
new file mode 100644
index 000000000000..6f3914bcfd01
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB Com Express CPU module board.
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9131-DB COM EXPRESS type 7 CPU module board";
+	compatible = "marvell,cn9131-cpu-module", "marvell,cn9131", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+	regulator-max-microvolt = <1800000>;
+	states = <1800000 0x1 1800000 0x0>;
+	/delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+	/delete-property/ gpio;
+};
+
+&cp1_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+	status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+	status = "disabled";
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_eth0 {
+	status = "disabled";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	status = "disabled";
+};
+
+&cp0_mdio {
+	status = "okay";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	phy0: ethernet-phy@0 {
+		status = "okay";
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_ge_mdio_pins: ge-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+	};
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_spi1 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp1_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp1_usb3_0_phy0>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy3 1>;
+	phy-names = "usb";
+};
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index e6e7592a3645..1e6f91731e92 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -32,10 +32,16 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel14-sku2.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-juniper-sku16.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kappa.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kenzo.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-makomo-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-makomo-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-pico.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-pico6.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu-sku22.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku32.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku38.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku288.dtb
@@ -44,6 +50,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
index b605313bed99..a1b96013f814 100644
--- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
@@ -8,8 +8,6 @@
 	pmic: pmic {
 		compatible = "mediatek,mt6358";
 		interrupt-controller;
-		interrupt-parent = <&pio>;
-		interrupts = <182 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 
 		mt6358codec: mt6358codec {
@@ -128,7 +126,6 @@
 			};
 
 			mt6358_vrf12_reg: ldo_vrf12 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -136,7 +133,6 @@
 			};
 
 			mt6358_vio18_reg: ldo_vio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -153,7 +149,6 @@
 			};
 
 			mt6358_vcamio_reg: ldo_vcamio {
-				compatible = "regulator-fixed";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -168,7 +163,6 @@
 			};
 
 			mt6358_vcn18_reg: ldo_vcn18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -176,7 +170,6 @@
 			};
 
 			mt6358_vfe28_reg: ldo_vfe28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vfe28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -193,7 +186,6 @@
 			};
 
 			mt6358_vcn28_reg: ldo_vcn28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -218,7 +210,6 @@
 			};
 
 			mt6358_vxo22_reg: ldo_vxo22 {
-				compatible = "regulator-fixed";
 				regulator-name = "vxo22";
 				regulator-min-microvolt = <2200000>;
 				regulator-max-microvolt = <2200000>;
@@ -234,7 +225,6 @@
 			};
 
 			mt6358_vaux18_reg: ldo_vaux18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaux18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -249,7 +239,6 @@
 			};
 
 			mt6358_vbif28_reg: ldo_vbif28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vbif28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -280,7 +269,6 @@
 			};
 
 			mt6358_vio28_reg: ldo_vio28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -288,7 +276,6 @@
 			};
 
 			mt6358_va12_reg: ldo_va12 {
-				compatible = "regulator-fixed";
 				regulator-name = "va12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -297,22 +284,14 @@
 			};
 
 			mt6358_vrf18_reg: ldo_vrf18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-enable-ramp-delay = <120>;
 			};
 
-			mt6358_vcn33_bt_reg: ldo_vcn33_bt {
-				regulator-name = "vcn33_bt";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3500000>;
-				regulator-enable-ramp-delay = <270>;
-			};
-
-			mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
-				regulator-name = "vcn33_wifi";
+			mt6358_vcn33_reg: ldo_vcn33 {
+				regulator-name = "vcn33";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3500000>;
 				regulator-enable-ramp-delay = <270>;
@@ -340,7 +319,6 @@
 			};
 
 			mt6358_vaud28_reg: ldo_vaud28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaud28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index c46682150e50..a1f42048dcc7 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -153,8 +153,7 @@
 			reg = <0>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
-			interrupt-parent = <&pio>;
-			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>;
 			reset-gpios = <&pio 54 0>;
 
 			ports {
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index b876e501216b..d06d4af43cbf 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -205,8 +205,7 @@
 		reg = <31>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 66 IRQ_TYPE_LEVEL_HIGH>;
 		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
index bdcd35cecad9..90cbbc18a483 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
@@ -13,8 +13,7 @@
 	touchscreen2: touchscreen@34 {
 		compatible = "melfas,mip4_ts";
 		reg = <0x34>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	/*
@@ -26,8 +25,7 @@
 		compatible = "hid-over-i2c";
 		reg = <0x20>;
 		hid-descr-addr = <0x0020>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -39,8 +37,7 @@
 	 */
 	trackpad2: trackpad@2c {
 		compatible = "hid-over-i2c";
-		interrupt-parent = <&pio>;
-		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x2c>;
 		hid-descr-addr = <0x0020>;
 		wakeup-source;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index 111495622cac..8d614ac2c58e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -245,8 +245,7 @@
 		reg = <0x1a>;
 		avdd-supply = <&mt6397_vgp1_reg>;
 		cpvdd-supply = <&mt6397_vcama_reg>;
-		interrupt-parent = <&pio>;
-		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_BOTH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&rt5650_irq>;
 		#sound-dai-cells = <1>;
@@ -308,8 +307,7 @@
 	da9211: da9211@68 {
 		compatible = "dlg,da9211";
 		reg = <0x68>;
-		interrupt-parent = <&pio>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
 
 		regulators {
 			da9211_vcpu_reg: BUCKA {
@@ -353,8 +351,7 @@
 	touchscreen: touchscreen@10 {
 		compatible = "elan,ekth3500";
 		reg = <0x10>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -366,8 +363,7 @@
 
 	trackpad: trackpad@15 {
 		compatible = "elan,ekth3000";
-		interrupt-parent = <&pio>;
-		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x15>;
 		vcc-supply = <&mt6397_vgp6_reg>;
 		wakeup-source;
@@ -439,8 +435,7 @@
 	btmrvl: btmrvl@2 {
 		compatible = "marvell,sd8897-bt";
 		reg = <2>;
-		interrupt-parent = <&pio>;
-		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 119 IRQ_TYPE_LEVEL_LOW>;
 		marvell,wakeup-pin = /bits/ 16 <0x0d>;
 		marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
 	};
@@ -448,8 +443,7 @@
 	mwifiex: mwifiex@1 {
 		compatible = "marvell,sd8897";
 		reg = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 38 IRQ_TYPE_LEVEL_LOW>;
 		marvell,wakeup-pin = <3>;
 	};
 };
@@ -933,8 +927,7 @@
 		compatible = "mediatek,mt6397";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
@@ -1160,8 +1153,7 @@
 		compatible = "google,cros-ec-spi";
 		reg = <0x0>;
 		spi-max-frequency = <12000000>;
-		interrupt-parent = <&pio>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 0 IRQ_TYPE_LEVEL_LOW>;
 		google,cros-ec-spi-msg-delay = <500>;
 
 		i2c_tunnel: i2c-tunnel0 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index d258c80213b2..0e5c628d1ec3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -303,8 +303,7 @@
 
 	pmic: pmic {
 		compatible = "mediatek,mt6397";
-		interrupt-parent = <&pio>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index c47d7d900f28..cac4cd0a0320 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1368,10 +1368,9 @@
 			#clock-cells = <1>;
 		};
 
-		vcodec_dec: vcodec@16000000 {
+		vcodec_dec: vcodec@16020000 {
 			compatible = "mediatek,mt8173-vcodec-dec";
-			reg = <0 0x16000000 0 0x100>,	/* VDEC_SYS */
-			      <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
+			reg = <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
 			      <0 0x16021000 0 0x800>,	/* VDEC_LD */
 			      <0 0x16021800 0 0x800>,	/* VDEC_TOP */
 			      <0 0x16022000 0 0x1000>,	/* VDEC_CM */
@@ -1382,6 +1381,8 @@
 			      <0 0x16027000 0 0x800>,	/* VDEC_HWQ */
 			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
 			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
+			reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp",
+				    "hwd", "hwq", "hwb", "hwg";
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
 			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
@@ -1392,6 +1393,7 @@
 				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
 			mediatek,vpu = <&vpu>;
+			mediatek,vdecsys = <&vdecsys>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>;
 			clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
 				 <&topckgen CLK_TOP_UNIVPLL_D2>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index 77f9ab94c00b..681deddffc2a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -381,6 +381,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &mfg {
 	domain-supply = <&mt6358_vgpu_reg>;
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
index 2c69e7658dba..8b57706ac814 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
@@ -11,8 +11,7 @@
 		pinctrl-0 = <&da7219_pins>;
 		compatible = "dlg,da7219";
 		reg = <0x1a>;
-		interrupt-parent = <&pio>;
-		interrupts = <165 IRQ_TYPE_LEVEL_LOW 165 0>;
+		interrupts-extended = <&pio 165 IRQ_TYPE_LEVEL_LOW>;
 
 		dlg,micbias-lvl = <2600>;
 		dlg,mic-amp-in-sel = "diff";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
index 0799c48ade19..548e22c194a2 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
@@ -11,8 +11,7 @@
 		pinctrl-0 = <&ts3a227e_pins>;
 		compatible = "ti,ts3a227e";
 		reg = <0x3b>;
-		interrupt-parent = <&pio>;
-		interrupts = <157 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 157 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
index 552bfc726999..0b45aee2e299 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
@@ -18,8 +18,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
index 77b96ddf648e..b595622e7bee 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
@@ -30,8 +30,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
index 37e6e58f63b7..5a1c39318a6c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
@@ -17,8 +17,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
index 0e09604004d5..3ea4fdb40118 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
@@ -17,8 +17,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
new file mode 100644
index 000000000000..4eb2a0d571af
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google makomo sku0 board";
+	chassis-type = "laptop";
+	compatible = "google,makomo-sku0", "google,makomo", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
new file mode 100644
index 000000000000..6a733361e8ae
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi"
+
+/ {
+	model = "Google makomo sku1 board";
+	chassis-type = "laptop";
+	compatible = "google,makomo-sku1", "google,makomo", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
new file mode 100644
index 000000000000..8ce9568fee95
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google pico board";
+	chassis-type = "convertible";
+	compatible = "google,pico-sku1", "google,pico", "mediatek,mt8183";
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
new file mode 100644
index 000000000000..a2e74b829320
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google pico6 board";
+	chassis-type = "convertible";
+	compatible = "google,pico-sku2", "google,pico", "mediatek,mt8183";
+
+	bt_wakeup: bt-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_wakeup>;
+
+		wobt {
+			label = "Wake on BT";
+			gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&wifi_wakeup {
+	wowlan {
+		gpios = <&pio 113 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&wifi_pwrseq {
+	post-power-on-delay-ms = <50>;
+
+	/* Toggle WIFI_ENABLE to reset the chip. */
+	reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+};
+
+&wifi_pins_pwrseq {
+	pins-wifi-enable {
+		pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+	};
+};
+
+&mmc1_pins_default {
+	pins-cmd-dat {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
+
+&mmc1 {
+	bt_reset: bt-reset {
+		compatible = "mediatek,mt7921s-bluetooth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_reset>;
+		reset-gpios = <&pio 120 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pio {
+	bt_pins_wakeup: bt-pins-wakeup {
+		piins-bt-wakeup {
+			pinmux = <PINMUX_GPIO42__FUNC_GPIO42>;
+			input-enable;
+		};
+	};
+
+	bt_pins_reset: bt-pins-reset {
+		pins-bt-reset {
+			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
+			output-high;
+		};
+	};
+};
+
+/delete-node/ &bluetooth;
+/delete-node/ &bt_pins;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 820260348de9..7592e3b86037 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -149,7 +149,6 @@
 		reg = <0x58>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&anx7625_pins>;
-		panel_flags = <1>;
 		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
 		vdd10-supply = <&pp1200_mipibrdg>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
index fcce8ea1232e..1ecf39458d93 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
@@ -14,6 +14,24 @@
 		     "google,kakadu", "mediatek,mt8183";
 };
 
+&i2c0 {
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&panel {
+	compatible = "boe,tv105wum-nw0";
+};
+
 &sound {
 	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
index ebfabba72507..ba74109a4909 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
@@ -13,3 +13,21 @@
 	compatible = "google,kakadu-rev3", "google,kakadu-rev2",
 			"google,kakadu", "mediatek,mt8183";
 };
+
+&i2c0 {
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&panel {
+	compatible = "boe,tv105wum-nw0";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index a11adeb29b1f..b6a9830af269 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -63,19 +63,6 @@
 
 &i2c0 {
 	status = "okay";
-
-	touchscreen: touchscreen@10 {
-		compatible = "hid-over-i2c";
-		reg = <0x10>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&open_touch>;
-
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
-
-		post-power-on-delay-ms = <10>;
-		hid-descr-addr = <0x0001>;
-	};
 };
 
 &mt6358_vcama2_reg {
@@ -384,5 +371,5 @@
 
 &panel {
 	status = "okay";
-	compatible = "boe,tv105wum-nw0";
+	/* compatible will be set in board dts */
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
new file mode 100644
index 000000000000..05361008e8ac
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google katsu board";
+	chassis-type = "tablet";
+	compatible = "google,katsu-sku32", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+	touchscreen1: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&lcd_pp3300>;
+	};
+};
+
+&panel {
+	compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KATSU";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
new file mode 100644
index 000000000000..cf008ed82878
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+/ {
+	model = "Google katsu sku38 board";
+	chassis-type = "tablet";
+	compatible = "google,katsu-sku38", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+	touchscreen1: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&lcd_pp3300>;
+	};
+};
+
+&panel {
+	compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KATSU";
+};
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
index 4864c39e53a4..306c95166f3f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -48,8 +48,7 @@
 	touchscreen: touchscreen@10 {
 		compatible = "hid-over-i2c";
 		reg = <0x10>;
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&touch_default>;
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
index d5f41c6c9881..382e4c6d7191 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -54,8 +54,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&open_touch>;
 
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
 
 		post-power-on-delay-ms = <10>;
 		hid-descr-addr = <0x0001>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 7881a27be029..1b3396b1cee3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -846,6 +846,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &pwm0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -884,14 +888,13 @@
 	status = "okay";
 	cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>;
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&h1_int_od_l>;
-		interrupt-parent = <&pio>;
-		interrupts = <153 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&pio 153 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
@@ -918,8 +921,7 @@
 		compatible = "google,cros-ec-spi";
 		reg = <0>;
 		spi-max-frequency = <3000000>;
-		interrupt-parent = <&pio>;
-		interrupts = <151 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 151 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ec_ap_int_odl>;
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index b5784a60c315..76449b4cf236 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -370,6 +370,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &mfg {
 	domain-supply = <&mt6358_vgpu_reg>;
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 976dc968b3ca..920ee415ef5f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1183,22 +1183,10 @@
 			status = "disabled";
 		};
 
-		svs: svs@1100b000 {
-			compatible = "mediatek,mt8183-svs";
-			reg = <0 0x1100b000 0 0x1000>;
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&infracfg CLK_INFRA_THERM>;
-			clock-names = "main";
-			nvmem-cells = <&svs_calibration>,
-				      <&thermal_calibration>;
-			nvmem-cell-names = "svs-calibration-data",
-					   "t-calibration-data";
-		};
-
 		thermal: thermal@1100b000 {
 			#thermal-sensor-cells = <1>;
 			compatible = "mediatek,mt8183-thermal";
-			reg = <0 0x1100b000 0 0x1000>;
+			reg = <0 0x1100b000 0 0xc00>;
 			clocks = <&infracfg CLK_INFRA_THERM>,
 				 <&infracfg CLK_INFRA_AUXADC>;
 			clock-names = "therm", "auxadc";
@@ -1210,6 +1198,18 @@
 			nvmem-cell-names = "calibration-data";
 		};
 
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8183-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>,
+				      <&thermal_calibration>;
+			nvmem-cell-names = "svs-calibration-data",
+					   "t-calibration-data";
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1660,7 +1660,7 @@
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
 		};
 
-		mdp3-rdma0@14001000 {
+		dma-controller0@14001000 {
 			compatible = "mediatek,mt8183-mdp3-rdma";
 			reg = <0 0x14001000 0 0x1000>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
@@ -1672,6 +1672,7 @@
 			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
 			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
 				 <&gce 21 CMDQ_THR_PRIO_LOWEST 0>;
+			#dma-cells = <1>;
 		};
 
 		mdp3-rsz0@14003000 {
@@ -1692,7 +1693,7 @@
 			clocks = <&mmsys CLK_MM_MDP_RSZ1>;
 		};
 
-		mdp3-wrot0@14005000 {
+		dma-controller@14005000 {
 			compatible = "mediatek,mt8183-mdp3-wrot";
 			reg = <0 0x14005000 0 0x1000>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
@@ -1701,6 +1702,7 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_MDP_WROT0>;
 			iommus = <&iommu M4U_PORT_MDP_WROT0>;
+			#dma-cells = <1>;
 		};
 
 		mdp3-wdma@14006000 {
@@ -1898,6 +1900,36 @@
 			#clock-cells = <1>;
 		};
 
+		vcodec_dec: video-codec@16020000 {
+			compatible = "mediatek,mt8183-vcodec-dec";
+			reg = <0 0x16020000 0 0x1000>,		/* VDEC_MISC */
+			      <0 0x16021000 0 0x800>,		/* VDEC_VLD */
+			      <0 0x16021800 0 0x800>,		/* VDEC_TOP */
+			      <0 0x16022000 0 0x1000>,		/* VDEC_MC */
+			      <0 0x16023000 0 0x1000>,		/* VDEC_AVCVLD */
+			      <0 0x16024000 0 0x1000>,		/* VDEC_AVCMV */
+			      <0 0x16025000 0 0x1000>,		/* VDEC_PP */
+			      <0 0x16026800 0 0x800>,		/* VP8_VD */
+			      <0 0x16027000 0 0x800>,		/* VP6_VD */
+			      <0 0x16027800 0 0x800>,		/* VP8_VL */
+			      <0 0x16028400 0 0x400>;		/* VP9_VD */
+			reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp",
+				    "hwd", "hwq", "hwb", "hwg";
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PPWRAP_EXT>;
+			mediatek,scp = <&scp>;
+			mediatek,vdecsys = <&vdecsys>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_VDEC>;
+			clocks = <&vdecsys CLK_VDEC_VDEC>;
+			clock-names = "vdec";
+		};
+
 		larb1: larb@16010000 {
 			compatible = "mediatek,mt8183-smi-larb";
 			reg = <0 0x16010000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index df0c04f2ba1d..2fec6fd1c1a7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -22,7 +22,7 @@
 
 	aliases {
 		ovl0 = &ovl0;
-		ovl_2l0 = &ovl_2l0;
+		ovl-2l0 = &ovl_2l0;
 		rdma0 = &rdma0;
 		rdma1 = &rdma1;
 	};
@@ -1160,14 +1160,14 @@
 			status = "disabled";
 		};
 
-		adsp_mailbox0: mailbox@10686000 {
+		adsp_mailbox0: mailbox@10686100 {
 			compatible = "mediatek,mt8186-adsp-mbox";
 			#mbox-cells = <0>;
 			reg = <0 0x10686100 0 0x1000>;
 			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
-		adsp_mailbox1: mailbox@10687000 {
+		adsp_mailbox1: mailbox@10687100 {
 			compatible = "mediatek,mt8186-adsp-mbox";
 			#mbox-cells = <0>;
 			reg = <0 0x10687100 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
new file mode 100644
index 000000000000..68a82b49f7a3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8188.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+	model = "MediaTek MT8188 evaluation board";
+	compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
+
+	aliases {
+		serial0 = &uart0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <8>;
+	hs400-ds-delay = <0x1481b>;
+	max-frequency = <200000000>;
+
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	non-removable;
+
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+
+	status = "okay";
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+	};
+};
+
+&pio {
+	adsp_uart_pins: adsp-uart-pins {
+		pins-tx-rx {
+			pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
+				 <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk-ds {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>,
+				 <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins_default: nor-pins {
+		pins-io-ck {
+			pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
+				 <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
+				 <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
+			bias-pull-down;
+		};
+
+		pins-io-cs {
+			pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>,
+				 <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>,
+				 <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>;
+			bias-pull-up;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				 <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				 <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				 <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				 <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-rx-tx {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	memory-region = <&scp_mem_reserved>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+};
+
+&xhci2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
new file mode 100644
index 000000000000..b4315c9214dc
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -0,0 +1,956 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2023 MediaTek Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/mediatek,mt8188-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+#include <dt-bindings/power/mediatek,mt8188-power.h>
+
+/ {
+	compatible = "mediatek,mt8188";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x000>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x600>;
+			enable-method = "psci";
+			clock-frequency = <2600000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x700>;
+			enable-method = "psci";
+			clock-frequency = <2600000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_off_l: cpu-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010000>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <95>;
+				min-residency-us = <580>;
+			};
+
+			cpu_off_b: cpu-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010000>;
+				local-timer-stop;
+				entry-latency-us = <45>;
+				exit-latency-us = <140>;
+				min-residency-us = <740>;
+			};
+
+			cluster_off_l: cluster-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010010>;
+				local-timer-stop;
+				entry-latency-us = <55>;
+				exit-latency-us = <155>;
+				min-residency-us = <840>;
+			};
+
+			cluster_off_b: cluster-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010010>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <200>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-unified;
+		};
+	};
+
+	clk13m: oscillator-13m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <13000000>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+		clock-frequency = <13000000>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			#redistributor-regions = <1>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c040000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8188-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: syscon@10001000 {
+			compatible = "mediatek,mt8188-infracfg-ao", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8188-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8188-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11c00000 0 0x1000>,
+			      <0 0x11e10000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11ea0000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg_rm", "iocfg_lt",
+				    "iocfg_lm", "iocfg_rt", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 176>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>;
+			#interrupt-cells = <2>;
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8188-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			mediatek,disable-extrst;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8188-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8188-timer", "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk13m>;
+		};
+
+		pwrap: pwrap@10024000 {
+			compatible = "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap", "syscon";
+			reg = <0 0x10024000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
+			clock-names = "spi", "wrap";
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8188-scp";
+			reg = <0 0x10500000 0 0x100000>,
+			      <0 0x10720000 0 0xe0000>;
+			reg-names = "sram", "cfg";
+			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		adsp_audio26m: clock-controller@10b91100 {
+			compatible = "mediatek,mt8188-adsp-audio26m";
+			reg = <0 0x10b91100 0 0x100>;
+			#clock-cells = <1>;
+		};
+
+		uart0: serial@11001100 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001100 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11001200 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001200 0 0x100>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11001300 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001300 0 0x100>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart3: serial@11001400 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001400 0 0x100>;
+			interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		auxadc: adc@11002000 {
+			compatible = "mediatek,mt8188-auxadc", "mediatek,mt8173-auxadc";
+			reg = <0 0x11002000 0 0x1000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pericfg_ao: syscon@11003000 {
+			compatible = "mediatek,mt8188-pericfg-ao", "syscon";
+			reg = <0 0x11003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi4: spi@11018000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11019000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11019000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		xhci1: usb@11200000 {
+			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x1000>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port1 PHY_TYPE_USB2>,
+			       <&u3port1 PHY_TYPE_USB3>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x468 2>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x10000>,
+			      <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>,
+				 <&infracfg_ao CLK_INFRA_AO_RG_AES_MSDCFDE_CK_0P>;
+			clock-names = "source", "hclk", "source_cg", "crypto_clk";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11eb0000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11280000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11280000 0 0x1000>,
+			      <0 0x10220080 0 0x80>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C0>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11281000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11281000 0 0x1000>,
+			      <0 0x10220180 0 0x80>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C2>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11282000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11282000 0 0x1000>,
+			      <0 0x10220280 0 0x80>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C3>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_c: clock-controller@11283000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-c";
+			reg = <0 0x11283000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		xhci2: usb@112a0000 {
+			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x112a0000 0 0x1000>,
+			      <0 0x112a3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>,
+					  <&topckgen CLK_TOP_USB_TOP_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_P3_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			status = "disabled";
+		};
+
+		xhci0: usb@112b0000 {
+			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x112b0000 0 0x1000>,
+			      <0 0x112b3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port0 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>,
+					  <&topckgen CLK_TOP_USB_TOP_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_P2_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x460 2>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		nor_flash: spi@1132c000 {
+			compatible = "mediatek,mt8188-nor", "mediatek,mt8186-nor";
+			reg = <0 0x1132c000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_SPINOR>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIFLASHCK>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>;
+			clock-names = "spi", "sf", "axi";
+			assigned-clocks = <&topckgen CLK_TOP_SPINOR>;
+			interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11e00000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11e00000 0 0x1000>,
+			      <0 0x10220100 0 0x80>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C1>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11e01000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11e01000 0 0x1000>,
+			      <0 0x10220380 0 0x80>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C4>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_w: clock-controller@11e02000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-w";
+			reg = <0 0x11e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		u3phy0: t-phy@11e30000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e30000 0x1000>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy1: t-phy@11e40000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e40000 0x1000>;
+			status = "disabled";
+
+			u2port1: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port1: usb-phy@700 {
+				reg = <0x700 0x700>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>,
+					 <&clk26m>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		u3phy2: t-phy@11e80000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e80000 0x1000>;
+			status = "disabled";
+
+			u2port2: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		i2c5: i2c@11ec0000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11ec0000 0 0x1000>,
+			      <0 0x10220480 0 0x80>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C5>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@11ec1000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11ec1000 0 0x1000>,
+			      <0 0x10220600 0 0x80>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C6>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_en: clock-controller@11ec2000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-en";
+			reg = <0 0x11ec2000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt8188-mfgcfg";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vppsys0: clock-controller@14000000 {
+			compatible = "mediatek,mt8188-vppsys0";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys: clock-controller@14e00000 {
+			compatible = "mediatek,mt8188-wpesys";
+			reg = <0 0x14e00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys_vpp0: clock-controller@14e02000 {
+			compatible = "mediatek,mt8188-wpesys-vpp0";
+			reg = <0 0x14e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vppsys1: clock-controller@14f00000 {
+			compatible = "mediatek,mt8188-vppsys1";
+			reg = <0 0x14f00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys: clock-controller@15000000 {
+			compatible = "mediatek,mt8188-imgsys";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys1_dip_top: clock-controller@15110000 {
+			compatible = "mediatek,mt8188-imgsys1-dip-top";
+			reg = <0 0x15110000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys1_dip_nr: clock-controller@15130000 {
+			compatible = "mediatek,mt8188-imgsys1-dip-nr";
+			reg = <0 0x15130000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe1: clock-controller@15220000 {
+			compatible = "mediatek,mt8188-imgsys-wpe1";
+			reg = <0 0x15220000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ipesys: clock-controller@15330000 {
+			compatible = "mediatek,mt8188-ipesys";
+			reg = <0 0x15330000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe2: clock-controller@15520000 {
+			compatible = "mediatek,mt8188-imgsys-wpe2";
+			reg = <0 0x15520000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe3: clock-controller@15620000 {
+			compatible = "mediatek,mt8188-imgsys-wpe3";
+			reg = <0 0x15620000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys: clock-controller@16000000 {
+			compatible = "mediatek,mt8188-camsys";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawa: clock-controller@1604f000 {
+			compatible = "mediatek,mt8188-camsys-rawa";
+			reg = <0 0x1604f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_yuva: clock-controller@1606f000 {
+			compatible = "mediatek,mt8188-camsys-yuva";
+			reg = <0 0x1606f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawb: clock-controller@1608f000 {
+			compatible = "mediatek,mt8188-camsys-rawb";
+			reg = <0 0x1608f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_yuvb: clock-controller@160af000 {
+			compatible = "mediatek,mt8188-camsys-yuvb";
+			reg = <0 0x160af000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ccusys: clock-controller@17200000 {
+			compatible = "mediatek,mt8188-ccusys";
+			reg = <0 0x17200000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys_soc: clock-controller@1800f000 {
+			compatible = "mediatek,mt8188-vdecsys-soc";
+			reg = <0 0x1800f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys: clock-controller@1802f000 {
+			compatible = "mediatek,mt8188-vdecsys";
+			reg = <0 0x1802f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt8188-vencsys";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index f2281250ac35..d87aab8d7a79 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -1402,7 +1402,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi5_pins>;
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 69f4cded5dbb..6dd32dbfb832 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -14,6 +14,8 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/mt8192-power.h>
 #include <dt-bindings/reset/mt8192-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
 
 / {
 	compatible = "mediatek,mt8192";
@@ -72,6 +74,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@100 {
@@ -90,6 +93,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@200 {
@@ -108,6 +112,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@300 {
@@ -126,6 +131,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu4: cpu@400 {
@@ -144,6 +150,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@500 {
@@ -162,6 +169,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@600 {
@@ -180,6 +188,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@700 {
@@ -198,6 +207,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu-map {
@@ -788,6 +798,29 @@
 			status = "disabled";
 		};
 
+		lvts_ap: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8192-lvts-ap";
+			reg = <0 0x1100b000 0 0xc00>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_e_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8192-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>, <&lvts_e_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg MT8192_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+			reset-names = "svs_rst";
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1114,6 +1147,17 @@
 			status = "disabled";
 		};
 
+		lvts_mcu: thermal-sensor@11278000 {
+			compatible = "mediatek,mt8192-lvts-mcu";
+			reg = <0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+			nvmem-cells = <&lvts_e_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
 		efuse: efuse@11c10000 {
 			compatible = "mediatek,mt8192-efuse", "mediatek,efuse";
 			reg = <0 0x11c10000 0 0x1000>;
@@ -1899,4 +1943,426 @@
 			power-domains = <&spm MT8192_POWER_DOMAIN_MDP>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU0>;
+
+			trips {
+				cpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU1>;
+
+			trips {
+				cpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU2>;
+
+			trips {
+				cpu2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU3>;
+
+			trips {
+				cpu3_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU0>;
+
+			trips {
+				cpu4_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU1>;
+
+			trips {
+				cpu5_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU2>;
+
+			trips {
+				cpu6_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU3>;
+
+			trips {
+				cpu7_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		vpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_VPU0>;
+
+			trips {
+				vpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		vpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_VPU1>;
+
+			trips {
+				vpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_GPU0>;
+
+			trips {
+				gpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_GPU1>;
+
+			trips {
+				gpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		infra-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_INFRA>;
+
+			trips {
+				infra_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				infra_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_CAM>;
+
+			trips {
+				cam_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD0>;
+
+			trips {
+				md0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD1>;
+
+			trips {
+				md1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD2>;
+
+			trips {
+				md2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index 5a7cab489ff3..3c6079edda19 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -127,6 +127,77 @@
 		regulator-boot-on;
 	};
 
+	/* Murata NCP03WF104F05RL */
+	tboard_thermistor1: thermal-sensor-t1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
+	tboard_thermistor2: thermal-sensor-t2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
 	usb_vbus: regulator-5v0-usb-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb-vbus";
@@ -189,6 +260,10 @@
 	memory-region = <&afe_mem>;
 };
 
+&auxadc {
+	status = "okay";
+};
+
 &dp_intf0 {
 	status = "okay";
 
@@ -401,6 +476,14 @@
 	};
 };
 
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
 &mmc0 {
 	status = "okay";
 
@@ -471,7 +554,6 @@
 
 /* for GPU SRAM */
 &mt6359_vsram_others_ldo_reg {
-	regulator-always-on;
 	regulator-min-microvolt = <750000>;
 	regulator-max-microvolt = <750000>;
 };
@@ -1154,7 +1236,36 @@
 				regulator-enable-ramp-delay = <256>;
 				regulator-ramp-delay = <6250>;
 				regulator-allowed-modes = <0 1 2>;
-				regulator-always-on;
+			};
+		};
+	};
+};
+
+&thermal_zones {
+	soc-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&tboard_thermistor1>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pmic-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <0>;
+		thermal-sensors = <&tboard_thermistor2>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
 			};
 		};
 	};
@@ -1183,6 +1294,7 @@
 &xhci0 {
 	status = "okay";
 
+	rx-fifo-depth = <3072>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
@@ -1190,6 +1302,7 @@
 &xhci1 {
 	status = "okay";
 
+	rx-fifo-depth = <3072>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 69c7f3954ae5..4127cb84eba4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -128,6 +128,7 @@
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;
+		#interrupt-cells = <1>;
 		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "IRQB";
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index e0ac2e9f5b72..b9101662ce40 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -538,7 +538,7 @@
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8195_POWER_DOMAIN_MFG1 {
+					mfg1: power-domain@MT8195_POWER_DOMAIN_MFG1 {
 						reg = <MT8195_POWER_DOMAIN_MFG1>;
 						clocks = <&apmixedsys CLK_APMIXED_MFGPLL>,
 							 <&topckgen CLK_TOP_MFG_CORE_TMP>;
@@ -1119,7 +1119,7 @@
 
 		lvts_ap: thermal-sensor@1100b000 {
 			compatible = "mediatek,mt8195-lvts-ap";
-			reg = <0 0x1100b000 0 0x1000>;
+			reg = <0 0x1100b000 0 0xc00>;
 			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
 			resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
@@ -1128,6 +1128,18 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8195-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calib_data &lvts_efuse_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg_ao MT8195_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+			reset-names = "svs_rst";
+		};
+
 		disp_pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1686,6 +1698,9 @@
 			lvts_efuse_data2: lvts2-calib@1d0 {
 				reg = <0x1d0 0x38>;
 			};
+			svs_calib_data: svs-calib@580 {
+				reg = <0x580 0x64>;
+			};
 		};
 
 		u3phy2: t-phy@11c40000 {
@@ -1718,6 +1733,26 @@
 			};
 		};
 
+		mipi_tx0: dsi-phy@11c80000 {
+			compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c80000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx1: dsi-phy@11c90000 {
+			compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c90000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx1_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		i2c5: i2c@11d00000 {
 			compatible = "mediatek,mt8195-i2c",
 				     "mediatek,mt8192-i2c";
@@ -1965,6 +2000,115 @@
 			#clock-cells = <1>;
 		};
 
+		dma-controller@14001000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14001000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_RDMA>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>;
+			mboxes = <&gce1 12 CMDQ_THR_PRIO_1>,
+				 <&gce1 13 CMDQ_THR_PRIO_1>,
+				 <&gce1 14 CMDQ_THR_PRIO_1>,
+				 <&gce1 21 CMDQ_THR_PRIO_1>,
+				 <&gce1 22 CMDQ_THR_PRIO_1>;
+			#dma-cells = <1>;
+		};
+
+		display@14002000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14002000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+		};
+
+		display@14003000 {
+			compatible = "mediatek,mt8195-mdp3-stitch";
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_STITCH>;
+		};
+
+		display@14004000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14004000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+		};
+
+		display@14005000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14005000 0 0x1000>;
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x5000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@14006000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14006000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>;
+		};
+
+		display@14007000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14007000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+		};
+
+		display@14008000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14008000 0 0x1000>;
+			interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x8000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@14009000 {
+			compatible = "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x9000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_OVL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_OVL>;
+		};
+
+		display@1400a000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x1400a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xa000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_PADDING>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@1400b000 {
+			compatible = "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x1400b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+		};
+
+		dma-controller@1400c000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x1400c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xc000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_WROT>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			#dma-cells = <1>;
+		};
+
 		mutex@1400f000 {
 			compatible = "mediatek,mt8195-vpp-mutex";
 			reg = <0 0x1400f000 0 0x1000>;
@@ -2112,6 +2256,289 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
 		};
 
+		display@14f06000 {
+			compatible = "mediatek,mt8195-mdp3-split";
+			reg = <0 0x14f06000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x6000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_VPP_SPLIT>,
+				 <&vppsys1 CLK_VPP1_HDMI_META>,
+				 <&vppsys1 CLK_VPP1_VPP_SPLIT_HDMI>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f07000 {
+			compatible = "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x14f07000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x7000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TCC>;
+		};
+
+		dma-controller@14f08000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f08000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x8000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RDMA>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f09000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f09000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x9000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RDMA>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f0a000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f0a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xa000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RDMA>;
+			iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		display@14f0b000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xb000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_FG>;
+		};
+
+		display@14f0c000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xc000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_FG>;
+		};
+
+		display@14f0d000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0d000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xd000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_FG>;
+		};
+
+		display@14f0e000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0e000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xe000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_HDR>;
+		};
+
+		display@14f0f000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0f000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xf000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_HDR>;
+		};
+
+		display@14f10000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f10000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_HDR>;
+		};
+
+		display@14f11000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f11000 0 0x1000>;
+			interrupts = <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f12000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f12000 0 0x1000>;
+			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x2000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f13000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f13000 0 0x1000>;
+			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x3000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f14000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f14000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RSZ>;
+		};
+
+		display@14f15000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f15000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>;
+		};
+
+		display@14f16000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f16000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>;
+		};
+
+		display@14f17000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f17000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x7000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TDSHP>;
+		};
+
+		display@14f18000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f18000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x8000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_TDSHP>;
+		};
+
+		display@14f19000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f19000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x9000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_TDSHP>;
+		};
+
+		display@14f1a000 {
+			compatible = "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xa000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_MERGE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1b000 {
+			compatible = "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xb000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_MERGE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1c000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1c000 0 0x1000>;
+			interrupts = <GIC_SPI 628 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xc000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1d000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1d000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xd000 0x1000>;
+			interrupts = <GIC_SPI 629 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1e000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1e000 0 0x1000>;
+			interrupts = <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xe000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1f000 {
+			compatible = "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14f1f000 0 0x1000>;
+			interrupts = <GIC_SPI 631 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xf000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_OVL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_OVL>;
+		};
+
+		display@14f20000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f20000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f21000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f21000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f22000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f22000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x2000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		dma-controller@14f23000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f23000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x3000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_WROT>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f24000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f24000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>,
+					<CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f25000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f25000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>,
+					<CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>;
+			iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
 		imgsys: clock-controller@15000000 {
 			compatible = "mediatek,mt8195-imgsys";
 			reg = <0 0x15000000 0 0x1000>;
@@ -2741,6 +3168,20 @@
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
 		};
 
+		dsi0: dsi@1c008000 {
+			compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x1c008000 0 0x1000>;
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSI0>,
+				 <&vdosys0 CLK_VDO0_DSI0_DSI>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
 		dsc0: dsc@1c009000 {
 			compatible = "mediatek,mt8195-disp-dsc";
 			reg = <0 0x1c009000 0 0x1000>;
@@ -2750,6 +3191,20 @@
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>;
 		};
 
+		dsi1: dsi@1c012000 {
+			compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x1c012000 0 0x1000>;
+			interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSI1>,
+				 <&vdosys0 CLK_VDO0_DSI1_DSI>,
+				 <&mipi_tx1>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx1>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
 		merge0: merge@1c014000 {
 			compatible = "mediatek,mt8195-disp-merge";
 			reg = <0 0x1c014000 0 0x1000>;
@@ -2873,7 +3328,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 		};
 
-		vdo1_rdma0: rdma@1c104000 {
+		vdo1_rdma0: dma-controller@1c104000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c104000 0 0x1000>;
 			interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2881,9 +3336,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma1: rdma@1c105000 {
+		vdo1_rdma1: dma-controller@1c105000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c105000 0 0x1000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2891,9 +3347,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma2: rdma@1c106000 {
+		vdo1_rdma2: dma-controller@1c106000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c106000 0 0x1000>;
 			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2901,9 +3358,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma3: rdma@1c107000 {
+		vdo1_rdma3: dma-controller@1c107000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c107000 0 0x1000>;
 			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2911,9 +3369,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma4: rdma@1c108000 {
+		vdo1_rdma4: dma-controller@1c108000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c108000 0 0x1000>;
 			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2921,9 +3380,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma5: rdma@1c109000 {
+		vdo1_rdma5: dma-controller@1c109000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c109000 0 0x1000>;
 			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2931,9 +3391,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma6: rdma@1c10a000 {
+		vdo1_rdma6: dma-controller@1c10a000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c10a000 0 0x1000>;
 			interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2941,9 +3402,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma7: rdma@1c10b000 {
+		vdo1_rdma7: dma-controller@1c10b000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c10b000 0 0x1000>;
 			interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2951,6 +3413,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>;
+			#dma-cells = <1>;
 		};
 
 		merge1: vpp-merge@1c10c000 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
index 00ac59a873e8..7fc515a07c65 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -210,8 +210,7 @@
 	touchscreen@5d {
 		compatible = "goodix,gt9271";
 		reg = <0x5d>;
-		interrupt-parent = <&pio>;
-		interrupts = <132 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
 		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
 		AVDD28-supply = <&mt6360_ldo1>;
@@ -774,8 +773,7 @@
 };
 
 &pmic {
-	interrupt-parent = <&pio>;
-	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &scp {
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index ea13c4a7027c..81a82933e350 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -175,7 +175,7 @@
 			status = "okay";
 
 			phy-handle = <&mgbe0_phy>;
-			phy-mode = "usxgmii";
+			phy-mode = "10gbase-r";
 
 			mdio {
 				#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 3f16595d099c..d1bd328892af 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -1459,7 +1459,7 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
 			status = "disabled";
 		};
 
@@ -1493,7 +1493,7 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBEBWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
 			status = "disabled";
 		};
 
@@ -1527,7 +1527,7 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBECWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF2>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBED>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d6cb840b7050..39889d5f8e12 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-uf896.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-ufi001c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-huawei-kiwi.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-longcheer-l9100.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-sony-xperia-kanuti-tulip.dtb
@@ -87,8 +88,10 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-maple.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-fairphone-fp5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb4210-rb2.dtb
@@ -220,6 +223,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx203.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx206.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-boe.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-csot.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-pipa.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-microsoft-surface-duo2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-mtp.dtb
@@ -231,3 +235,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx223.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx224.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-qcp.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
index e636a1cb9b77..8460b538eb6a 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -67,6 +67,18 @@
 	};
 };
 
+&usb {
+	status = "okay";
+};
+
+&usb_dwc {
+	dr_mode = "host";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
 &xo_board_clk {
 	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 38ffdc3cbdcd..32b178b639f0 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -5,6 +5,7 @@
  * Copyright (c) 2023 The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,apss-ipq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
 #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
@@ -36,6 +37,8 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		CPU1: cpu@1 {
@@ -44,6 +47,8 @@
 			reg = <0x1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		L2_0: l2-cache {
@@ -54,6 +59,23 @@
 		};
 	};
 
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
 	firmware {
 		scm {
 			compatible = "qcom,scm-ipq5018", "qcom,scm";
@@ -82,6 +104,24 @@
 		#size-cells = <2>;
 		ranges;
 
+		bootloader@4a800000 {
+			reg = <0x0 0x4a800000 0x0 0x200000>;
+			no-map;
+		};
+
+		sbl@4aa00000 {
+			reg = <0x0 0x4aa00000 0x0 0x100000>;
+			no-map;
+		};
+
+		smem@4ab00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4ab00000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
 		tz_region: tz@4ac00000 {
 			reg = <0x0 0x4ac00000 0x0 0x200000>;
 			no-map;
@@ -94,6 +134,19 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		usbphy0: phy@5b000 {
+			compatible = "qcom,ipq5018-usb-hsphy";
+			reg = <0x0005b000 0x120>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5018-tlmm";
 			reg = <0x01000000 0x300000>;
@@ -129,6 +182,12 @@
 			#power-domain-cells = <1>;
 		};
 
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
 		sdhc_1: mmc@7804000 {
 			compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x7804000 0x1000>;
@@ -146,6 +205,16 @@
 			status = "disabled";
 		};
 
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1d000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
 		blsp1_uart1: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x078af000 0x200>;
@@ -156,6 +225,61 @@
 			status = "disabled";
 		};
 
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		usb: usb@8af8800 {
+			compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			clocks = <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			resets = <&gcc GCC_USB0_BCR>;
+
+			qcom,select-utmi-as-pipe-clk;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			usb_dwc: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x08a00000 0xe000>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phy-names = "usb2-phy";
+				phys = <&usbphy0>;
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,  /* GICD */
@@ -189,6 +313,24 @@
 			clocks = <&sleep_clk>;
 		};
 
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq5018-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a53pll>, <&xo_board_clk>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
+			#mbox-cells = <1>;
+		};
+
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq5018-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board_clk>;
+			clock-names = "xo";
+		};
+
 		timer@b120000 {
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0b120000 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
index 4870cdb764d0..b37ae7749083 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
@@ -9,6 +9,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "ipq5332.dtsi"
 
 / {
@@ -39,6 +40,8 @@
 		pinctrl-names = "default";
 
 		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
 			gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tx";
 			default-state = "off";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
index e89e2e948603..846413817e9a 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
index efd480a7afdf..ed8a54eb95c0 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
index eb1fa33d6fe4..d5f99e741ae5 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index d3fef2f80a81..42e2e48b2bc3 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -91,11 +91,19 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
 
-		opp-1488000000 {
-			opp-hz = /bits/ 64 <1488000000>;
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -163,6 +171,11 @@
 			reg = <0x000a4000 0x721>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@1d {
+				reg = <0x1d 0x2>;
+				bits = <7 2>;
+			};
 		};
 
 		rng: rng@e3000 {
@@ -390,8 +403,8 @@
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo_board>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo_board>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index e59b9df96c7e..61c8fd49c966 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -96,42 +96,49 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&cpu_speed_bin>;
 		opp-shared;
 
 		opp-864000000 {
 			opp-hz = /bits/ 64 <864000000>;
 			opp-microvolt = <725000>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1056000000 {
 			opp-hz = /bits/ 64 <1056000000>;
 			opp-microvolt = <787500>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1320000000 {
 			opp-hz = /bits/ 64 <1320000000>;
 			opp-microvolt = <862500>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1440000000 {
 			opp-hz = /bits/ 64 <1440000000>;
 			opp-microvolt = <925000>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1608000000 {
 			opp-hz = /bits/ 64 <1608000000>;
 			opp-microvolt = <987500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <1062500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -236,31 +243,26 @@
 
 		ssphy_0: ssphy@78000 {
 			compatible = "qcom,ipq6018-qmp-usb3-phy";
-			reg = <0x0 0x00078000 0x0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x00078000 0x0 0x1000>;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "gcc_usb0_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB0_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb0_ssphy: phy@78200 {
-				reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
-				      <0x0 0x00078400 0x0 0x200>, /* Rx */
-				      <0x0 0x00078800 0x0 0x1f8>, /* PCS */
-				      <0x0 0x00078600 0x0 0x044>; /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "gcc_usb0_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_0: qusb@79000 {
@@ -314,6 +316,11 @@
 			reg = <0x0 0x000a4000 0x0 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@135 {
+				reg = <0x135 0x1>;
+				bits = <7 1>;
+			};
 		};
 
 		prng: qrng@e3000 {
@@ -439,6 +446,26 @@
 			qcom,ee = <0>;
 		};
 
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78af000 0x0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78b0000 0x0 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_uart3: serial@78b1000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x0 0x078b1000 0x0 0x200>;
@@ -449,6 +476,36 @@
 			status = "disabled";
 		};
 
+		blsp1_uart4: serial@78b2000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b2000 0x0 0x200>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart5: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78b3000 0x0 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart6: serial@78b4000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b4000 0x0 0x200>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_spi1: spi@78b5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;
@@ -477,6 +534,20 @@
 			status = "disabled";
 		};
 
+		blsp1_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b9000 0x0 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c2: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
@@ -557,7 +628,7 @@
 					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 			assigned-clock-rates = <133330000>,
 					       <133330000>,
-					       <20000000>;
+					       <24000000>;
 
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
@@ -566,7 +637,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x0 0x08a00000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				clocks = <&xo>;
 				clock-names = "ref";
@@ -611,8 +682,8 @@
 			compatible = "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0 0x0b111000 0x0 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
@@ -731,7 +802,7 @@
 			};
 		};
 
-		pcie0: pci@20000000 {
+		pcie0: pcie@20000000 {
 			compatible = "qcom,pcie-ipq6018";
 			reg = <0x0 0x20000000 0x0 0xf1d>,
 			      <0x0 0x20000f20 0x0 0xa8>,
@@ -759,10 +830,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2f275c84e566..26441447c866 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -125,32 +125,26 @@
 
 		ssphy_1: phy@58000 {
 			compatible = "qcom,ipq8074-qmp-usb3-phy";
-			reg = <0x00058000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00058000 0x1000>;
 
 			clocks = <&gcc GCC_USB1_AUX_CLK>,
-				<&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB1_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3phy_1_cc_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB1_PHY_BCR>,
-				<&gcc GCC_USB3PHY_1_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_1_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@58200 {
-				reg = <0x00058200 0x130>,     /* Tx */
-				      <0x00058400 0x200>,     /* Rx */
-				      <0x00058800 0x1f8>,     /* PCS */
-				      <0x00058600 0x044>;     /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB1_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3phy_1_cc_pipe_clk";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_1: phy@59000 {
@@ -168,32 +162,26 @@
 
 		ssphy_0: phy@78000 {
 			compatible = "qcom,ipq8074-qmp-usb3-phy";
-			reg = <0x00078000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00078000 0x1000>;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3phy_0_cc_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB0_PHY_BCR>,
-				<&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb0_ssphy: phy@78200 {
-				reg = <0x00078200 0x130>,     /* Tx */
-				      <0x00078400 0x200>,     /* Rx */
-				      <0x00078800 0x1f8>,     /* PCS */
-				      <0x00078600 0x044>;     /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3phy_0_cc_pipe_clk";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_0: phy@79000 {
@@ -369,8 +357,14 @@
 		gcc: gcc@1800000 {
 			compatible = "qcom,gcc-ipq8074";
 			reg = <0x01800000 0x80000>;
-			clocks = <&xo>, <&sleep_clk>;
-			clock-names = "xo", "sleep_clk";
+			clocks = <&xo>,
+				 <&sleep_clk>,
+				 <&pcie_qmp0>,
+				 <&pcie_qmp1>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "pcie0_pipe",
+				      "pcie1_pipe";
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
@@ -406,7 +400,7 @@
 		};
 
 		sdhc_1: mmc@7824900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,ipq8074-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x7824900 0x500>, <0x7824000 0x800>;
 			reg-names = "hc", "core";
 
@@ -523,6 +517,20 @@
 			status = "disabled";
 		};
 
+		blsp1_spi4: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 18>, <&blsp_dma 19>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c5: i2c@78b9000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
@@ -628,7 +636,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
@@ -670,7 +678,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x8c00000 0xcd00>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_1>, <&usb1_ssphy>;
+				phys = <&qusb_phy_1>, <&ssphy_1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
@@ -708,8 +716,8 @@
 			compatible = "qcom,ipq8074-apcs-apps-global",
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 
 			#clock-cells = <1>;
 			#mbox-cells = <1>;
@@ -781,7 +789,7 @@
 			};
 		};
 
-		pcie1: pci@10000000 {
+		pcie1: pcie@10000000 {
 			compatible = "qcom,pcie-ipq8074";
 			reg = <0x10000000 0xf1d>,
 			      <0x10000f20 0xa8>,
@@ -806,13 +814,13 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 142
+			interrupt-map = <0 0 0 1 &intc 0 0 142
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 143
+					<0 0 0 2 &intc 0 0 143
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 144
+					<0 0 0 3 &intc 0 0 144
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 145
+					<0 0 0 4 &intc 0 0 145
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -842,7 +850,7 @@
 			status = "disabled";
 		};
 
-		pcie0: pci@20000000 {
+		pcie0: pcie@20000000 {
 			compatible = "qcom,pcie-ipq8074-gen3";
 			reg = <0x20000000 0xf1d>,
 			      <0x20000f20 0xa8>,
@@ -868,13 +876,13 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75
+			interrupt-map = <0 0 0 1 &intc 0 0 75
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78
+					<0 0 0 2 &intc 0 0 78
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79
+					<0 0 0 3 &intc 0 0 79
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83
+					<0 0 0 4 &intc 0 0 83
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
new file mode 100644
index 000000000000..91e104b0f865
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP board common device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq9574.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulator_fixed_3p3: s3300 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_3p3";
+	};
+
+	regulator_fixed_0p925: s0925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_0p925";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+
+		mp5496_l2: l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio37";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_qmpphy {
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-supply = <&regulator_fixed_0p925>;
+
+	status = "okay";
+};
+
+&usb_0_qusbphy {
+	vdd-supply = <&regulator_fixed_0p925>;
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
index 2b093e02637b..f4f9199d4ab1 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
@@ -8,58 +8,12 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2";
 	compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
 };
 
 &sdhc_1 {
@@ -74,10 +28,6 @@
 	status = "okay";
 };
 
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
 &tlmm {
 	sdc_default_state: sdc-default-state {
 		clk-pins {
@@ -110,15 +60,4 @@
 			bias-pull-down;
 		};
 	};
-
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 877026ccc6e2..1bb8d96c9a82 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -8,69 +8,11 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
 	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	regulator_fixed_3p3: s3300 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-name = "fixed_3p3";
-	};
-
-	regulator_fixed_0p925: s0925 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <925000>;
-		regulator-max-microvolt = <925000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-name = "fixed_0p925";
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-
-		mp5496_l2: l2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
 };
 
 &sdhc_1 {
@@ -85,10 +27,6 @@
 	status = "okay";
 };
 
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
 &tlmm {
 	sdc_default_state: sdc-default-state {
 		clk-pins {
@@ -122,30 +60,3 @@
 		};
 	};
 };
-
-&usb_0_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_0_qmpphy {
-	vdda-pll-supply = <&mp5496_l2>;
-	vdda-phy-supply = <&regulator_fixed_0p925>;
-
-	status = "okay";
-};
-
-&usb_0_qusbphy {
-	vdd-supply = <&regulator_fixed_0p925>;
-	vdda-pll-supply = <&mp5496_l2>;
-	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
-
-	status = "okay";
-};
-
-&usb3 {
-	status = "okay";
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
-};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
index c8fa54e1a62c..d36d1078763e 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
@@ -8,73 +8,10 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6";
 	compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
index f01de6628c3b..c30c9fbedf26 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
@@ -8,73 +8,10 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8";
 	compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
index 6efae3426cb8..0dc382f5d5ec 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
@@ -8,73 +8,9 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9";
 	compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 8a72ad4afd03..5f83ee42a719 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -106,42 +106,56 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
 
 		opp-936000000 {
 			opp-hz = /bits/ 64 <936000000>;
 			opp-microvolt = <725000>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1104000000 {
 			opp-hz = /bits/ 64 <1104000000>;
 			opp-microvolt = <787500>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <862500>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1416000000 {
 			opp-hz = /bits/ 64 <1416000000>;
 			opp-microvolt = <862500>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1488000000 {
 			opp-hz = /bits/ 64 <1488000000>;
 			opp-microvolt = <925000>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <987500>;
+			opp-supported-hw = <0x5>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-2208000000 {
 			opp-hz = /bits/ 64 <2208000000>;
 			opp-microvolt = <1062500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -223,6 +237,11 @@
 			reg = <0x000a4000 0x5a1>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@15 {
+				reg = <0x15 0x2>;
+				bits = <7 2>;
+			};
 		};
 
 		cryptobam: dma-controller@704000 {
@@ -652,8 +671,8 @@
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a73pll>, <&xo_board_clk>;
-			clock-names = "pll", "xo";
+			clocks = <&a73pll>, <&xo_board_clk>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
index 57a74eea1005..b32c7a97394d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 
 /*
  * NOTE: The original firmware from Acer can only boot 32-bit kernels.
@@ -83,6 +84,29 @@
 	};
 };
 
+&blsp_i2c4 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index aa4c1ab1e673..3459145516a1 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -22,6 +24,19 @@
 		stdout-path = "serial0";
 	};
 
+	reserved-memory {
+		/delete-node/ reserved@86680000;
+		/delete-node/ rmtfs@86700000;
+
+		rmtfs: rmtfs@86680000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x86680000 0x0 0x160000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -50,6 +65,17 @@
 		};
 	};
 
+	reg_headphones_avdd: regulator-headphones-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "headphones_avdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&headphones_avdd_default>;
+		pinctrl-names = "default";
+	};
+
 	usb_id: usb-id {
 		compatible = "linux,extcon-usb-gpio";
 		id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
@@ -58,8 +84,41 @@
 	};
 };
 
-&blsp_uart2 {
+&blsp_i2c3 {
 	status = "okay";
+
+	headphones: audio-codec@10 {
+		compatible = "asahi-kasei,ak4375";
+		reg = <0x10>;
+		avdd-supply = <&reg_headphones_avdd>;
+		tvdd-supply = <&pm8916_l6>;
+		pdn-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&headphones_pdn_default>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <0>;
+	};
+
+	speaker_codec_top: audio-codec@34 {
+		compatible = "nxp,tfa9897";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l6>;
+		rcv-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&speaker_top_default>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Top";
+		#sound-dai-cells = <0>;
+	};
+
+	speaker_codec_bottom: audio-codec@36 {
+		compatible = "nxp,tfa9897";
+		reg = <0x36>;
+		vddd-supply = <&pm8916_l6>;
+		rcv-gpios = <&tlmm 111 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&speaker_bottom_default>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Bottom";
+		#sound-dai-cells = <0>;
+	};
 };
 
 &blsp_i2c4 {
@@ -153,6 +212,22 @@
 	};
 };
 
+&blsp_uart2 {
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -169,6 +244,17 @@
 	status = "okay";
 };
 
+&q6afedai {
+	dai@18 {
+		reg = <SECONDARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -183,6 +269,54 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	/* Add pin switches for speakers to allow disabling them individually */
+	model = "alcatel-idol3";
+	widgets =
+		"Speaker", "Speaker Top",
+		"Speaker", "Speaker Bottom";
+	pin-switches = "Speaker Top", "Speaker Bottom";
+	audio-routing =
+		"Speaker Top", "Speaker Top OUT",
+		"Speaker Bottom", "Speaker Bottom OUT",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &pri_mi2s_default &pri_mi2s_ws_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &pri_mi2s_sleep &pri_mi2s_ws_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec_top>, <&speaker_codec_bottom>;
+		};
+	};
+};
+
+&sound_link_backend0 {
+	/* Primary MI2S is not used, replace with Secondary MI2S for headphones */
+	link-name = "Secondary MI2S";
+
+	cpu {
+		sound-dai = <&q6afedai SECONDARY_MI2S_RX>;
+	};
+	platform {
+		sound-dai = <&q6routing>;
+	};
+	codec {
+		sound-dai = <&headphones>;
+	};
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -212,6 +346,15 @@
 	status = "okay";
 };
 
+/* Only some of the pins are used */
+&pri_mi2s_default {
+	pins = "gpio113", "gpio115";
+};
+
+&pri_mi2s_sleep {
+	pins = "gpio113", "gpio115";
+};
+
 &tlmm {
 	accel_int_default: accel-int-default-state {
 		pins = "gpio31";
@@ -245,6 +388,20 @@
 		bias-disable;
 	};
 
+	headphones_avdd_default: headphones-avdd-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	headphones_pdn_default: headphones-pdn-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	/*
 	 * The OEM wired an additional GPIO to be asserted so that
 	 * the si-en,sn3190 LED IC works. Since this GPIO is not
@@ -291,6 +448,20 @@
 		bias-disable;
 	};
 
+	speaker_bottom_default: speaker-bottom-default-state {
+		pins = "gpio111";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	speaker_top_default: speaker-top-default-state {
+		pins = "gpio50";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	ts_int_reset_default: ts-int-reset-default-state {
 		pins = "gpio13", "gpio100";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
index a8be6ff66893..77618c7374df 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -130,6 +132,18 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,micbias1-ext-cap;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_rpm_regulators {
 	pm8916_l17: l17 {
 		regulator-min-microvolt = <2850000>;
@@ -151,6 +165,13 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 47d1c5cb13f4..3a3e794c022f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -25,17 +27,45 @@
 
 	/*
 	 * For some reason, the signed wcnss firmware is not relocatable.
-	 * It must be loaded at 0x8b600000. All other firmware is relocatable,
-	 * so place wcnss at the fixed address and then all other firmware
-	 * regions will be automatically allocated at a fitting place.
+	 * It must be loaded at 0x8b600000. Unfortunately, this also means that
+	 * mpss_mem does not fit when loaded to the typical address at 0x86800000.
+	 *
+	 * Load wcnss_mem to the fixed address and relocate mpss_mem to the next
+	 * working higher address. For some reason the modem firmware does not
+	 * boot when placed at 0x8a800000 to 0x8e800000.
 	 */
 	reserved-memory {
+		/delete-node/ mpss@86800000;
 		/delete-node/ wcnss;
 
 		wcnss_mem: wcnss@8b600000 {
 			reg = <0x0 0x8b600000 0x0 0x600000>;
 			no-map;
 		};
+
+		mpss_mem: mpss@8e800000 {
+			reg = <0x0 0x8e800000 0x0 0x5000000>;
+			no-map;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4350000>;
+		energy-full-design-microwatt-hours = <9500000>;
+		charge-full-design-microamp-hours = <2500000>;
+
+		ocv-capacity-celsius = <25>;
+		ocv-capacity-table-0 = <4330000 100>, <4265000 95>,
+			<4208000 90>, <4153000 85>, <4100000 80>, <4049000 75>,
+			<4001000 70>, <3962000 65>, <3919000 60>, <3872000 55>,
+			<3839000 50>, <3817000 45>, <3798000 40>, <3783000 35>,
+			<3767000 30>, <3747000 25>, <3729000 20>, <3709000 16>,
+			<3688000 13>, <3681000 11>, <3680000 10>, <3679000 9>,
+			<3677000 8>, <3674000 7>, <3666000 6>, <3641000 5>,
+			<3597000 4>, <3537000 3>, <3457000 2>, <3336000 1>,
+			<3000000 0>;
 	};
 
 	gpio-keys {
@@ -93,6 +123,7 @@
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
 
 		led@0 {
 			reg = <0>;
@@ -225,6 +256,29 @@
 	status = "okay";
 };
 
+&pm8916_bms {
+	status = "okay";
+
+	monitored-battery = <&battery>;
+	power-supplies = <&pm8916_charger>;
+};
+
+&pm8916_charger {
+	status = "okay";
+
+	monitored-battery = <&battery>;
+
+	qcom,fast-charge-safe-current = <900000>;
+	qcom,fast-charge-safe-voltage = <4300000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -237,10 +291,6 @@
 	};
 };
 
-&pm8916_usbin {
-	status = "okay";
-};
-
 &pm8916_vib {
 	status = "okay";
 };
@@ -254,14 +304,21 @@
 	non-removable;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS Internal1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS Internal3";
+};
+
 &usb {
 	status = "okay";
 	dr_mode = "peripheral";
-	extcon = <&pm8916_usbin>;
+	extcon = <&pm8916_charger>;
 };
 
 &usb_hs_phy {
-	extcon = <&pm8916_usbin>;
+	extcon = <&pm8916_charger>;
 };
 
 &venus {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
index 41cadb906b98..3b7fdb6797a9 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -3,9 +3,12 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "BQ Aquaris X5 (Longcheer L8910)";
@@ -22,6 +25,16 @@
 		stdout-path = "serial0";
 	};
 
+	speaker_amp: audio-amplifier {
+		compatible = "awinic,aw8738";
+		mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		awinic,mode = <5>;
+		sound-name-prefix = "Speaker Amp";
+
+		pinctrl-0 = <&spk_ext_pa_default>;
+		pinctrl-names = "default";
+	};
+
 	flash-led-controller {
 		compatible = "ocs,ocp8110";
 		enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
@@ -74,6 +87,46 @@
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&status_led_default>;
+		pinctrl-names = "default";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
 &blsp_i2c3 {
 	status = "okay";
 
@@ -107,6 +160,27 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_gpios {
+	status_led_default: status-led-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		bias-disable;
+		output-high;
+	};
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -137,6 +211,28 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	/*
+	 * Provide widgets/pin-switches to allow enabling speaker separately.
+	 * The hardware does not provide a way to disable the output via the
+	 * headphone jack when the speaker is enabled.
+	 */
+	model = "bq-paella";
+	widgets =
+		"Speaker", "Speaker",
+		"Headphone", "Headphones";
+	pin-switches = "Speaker";
+	audio-routing =
+		"Speaker", "Speaker Amp OUT",
+		"Speaker Amp IN", "HPH_R",
+		"Headphones", "HPH_L",
+		"Headphones", "HPH_R",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+	aux-devs = <&speaker_amp>;
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -205,6 +301,13 @@
 		bias-disable;
 	};
 
+	spk_ext_pa_default: spk-ext-pa-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi b/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
new file mode 100644
index 000000000000..039961622633
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * msm8916-modem-qdsp6.dtsi describes the typical modem setup on MSM8916 devices
+ * (or similar SoCs) with audio routed via the QDSP6 services provided by the
+ * modem firmware. The digital/analog codec in the SoC/PMIC is used by default,
+ * but boards can define additional codecs by adding additional backend DAI links.
+ */
+
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+&apr {
+	status = "okay";
+};
+
+&bam_dmux {
+	status = "okay";
+};
+
+&bam_dmux_dma {
+	status = "okay";
+};
+
+&lpass {
+	status = "reserved"; /* Controlled by QDSP6 */
+};
+
+&lpass_codec {
+	status = "okay";
+};
+
+&mba_mem {
+	status = "okay";
+};
+
+&mpss {
+	status = "okay";
+};
+
+&mpss_mem {
+	status = "okay";
+};
+
+&pm8916_codec {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <0 1>;
+	};
+	dai@20 {
+		reg = <TERTIARY_MI2S_TX>;
+		qcom,sd-lines = <0 1>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+		direction = <Q6ASM_DAI_RX>;
+	};
+	dai@1 {
+		reg = <1>;
+		direction = <Q6ASM_DAI_TX>;
+	};
+	dai@2 {
+		reg = <2>;
+		direction = <Q6ASM_DAI_RX>;
+	};
+	dai@3 {
+		reg = <3>;
+		direction = <Q6ASM_DAI_RX>;
+		is-compress-dai;
+	};
+};
+
+&sound {
+	compatible = "qcom,msm8916-qdsp6-sndcard";
+	model = "msm8916";
+
+	pinctrl-0 = <&cdc_pdm_default>;
+	pinctrl-1 = <&cdc_pdm_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	frontend0-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	frontend1-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	frontend2-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	frontend3-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	sound_link_backend0: backend0-dai-link {
+		link-name = "Primary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	sound_link_backend1: backend1-dai-link {
+		link-name = "Tertiary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai TERTIARY_MI2S_TX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 0b29132b74e1..2937495940ea 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -1,10 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	aliases {
@@ -196,6 +199,18 @@
 	};
 };
 
+&blsp_i2c1 {
+	status = "okay";
+
+	speaker_codec: audio-codec@34 {
+		compatible = "nxp,tfa9895";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l5>;
+		sound-name-prefix = "Speaker";
+		#sound-dai-cells = <0>;
+	};
+};
+
 &blsp_i2c2 {
 	status = "okay";
 
@@ -243,6 +258,25 @@
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
 &mdss {
 	status = "okay";
 };
@@ -253,6 +287,10 @@
 	pinctrl-1 = <&mdss_sleep>;
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -265,6 +303,13 @@
 	};
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -279,6 +324,32 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	model = "samsung-a2015";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	status = "okay";
 	extcon = <&muic>, <&muic>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index f5a808369518..3b934f5eba47 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -49,11 +49,6 @@
 	};
 };
 
-&touchkey {
-	vcc-supply = <&reg_touch_key>;
-	vdd-supply = <&reg_key_led>;
-};
-
 &accelerometer {
 	mount-matrix = "0", "1", "0",
 		       "1", "0", "0",
@@ -108,6 +103,11 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&touchkey {
+	vcc-supply = <&reg_touch_key>;
+	vdd-supply = <&reg_key_led>;
+};
+
 &vibrator {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
index 0824ab041d80..3c49dac92d2d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
@@ -65,6 +65,10 @@
 	};
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5a00000>;
+};
+
 &reg_motor_vdd {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
index 3f145dde4059..5882b3a593b8 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
@@ -49,6 +49,10 @@
 	status = "disabled";
 };
 
+&sound {
+	model = "samsung-gmax"; /* No secondary microphone */
+};
+
 &tlmm {
 	gpio_leds_default: gpio-led-default-state {
 		pins = "gpio60";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
index c19cf20d7427..fbd2caf405d5 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
@@ -3,9 +3,12 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	aliases {
@@ -65,25 +68,6 @@
 	};
 };
 
-&blsp_i2c4 {
-	status = "okay";
-
-	fuelgauge@36 {
-		compatible = "maxim,max77849-battery";
-		reg = <0x36>;
-
-		maxim,rsns-microohm = <10000>;
-		maxim,over-heat-temp = <600>;
-		maxim,over-volt = <4400>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
-
-		pinctrl-0 = <&fuelgauge_int_default>;
-		pinctrl-names = "default";
-	};
-};
-
 &blsp_i2c2 {
 	status = "okay";
 
@@ -112,10 +96,52 @@
 	};
 };
 
+&blsp_i2c4 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max77849-battery";
+		reg = <0x36>;
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,over-volt = <4400>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&fuelgauge_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
 &blsp_uart2 {
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -133,6 +159,13 @@
 	status = "okay";
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -147,6 +180,27 @@
 	status = "okay";
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	dr_mode = "peripheral";
 	extcon = <&pm8916_usbin>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
index 75c4854ecd64..5b34529b816c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
@@ -9,6 +9,14 @@
 	compatible = "samsung,gt510", "qcom,msm8916";
 	chassis-type = "tablet";
 
+	speaker_codec: audio-codec {
+		compatible = "maxim,max98357a";
+		sdmode-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+		pinctrl-0 = <&audio_sdmode_default>;
+		pinctrl-names = "default";
+	};
+
 	clk_pwm: pwm {
 		compatible = "clk-pwm";
 		#pwm-cells = <2>;
@@ -112,6 +120,10 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -142,7 +154,21 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&sound {
+	model = "samsung-gt510";
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
 &tlmm {
+	audio_sdmode_default: audio-sdmode-default-state {
+		pins = "gpio55";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	buckbooster_en_default: buckbooster-en-default-state {
 		pins = "gpio51";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
index 11359bcc27b3..579312ed53ce 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
@@ -35,6 +35,26 @@
 		pinctrl-names = "default";
 	};
 
+	i2c-amplifier {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 55 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 56 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&amp_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		speaker_codec: audio-codec@34 {
+			compatible = "nxp,tfa9895";
+			reg = <0x34>;
+			vddd-supply = <&pm8916_l5>;
+			sound-name-prefix = "Speaker";
+			#sound-dai-cells = <0>;
+		};
+	};
+
 	vibrator {
 		compatible = "gpio-vibrator";
 		enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
@@ -64,6 +84,10 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -94,7 +118,21 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&sound {
+	model = "samsung-a2015";
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &secondary_mic_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &secondary_mic_default>;
+	pinctrl-names = "default", "sleep";
+};
+
 &tlmm {
+	amp_i2c_default: amp-i2c-default-state {
+		pins = "gpio55", "gpio56";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	buckbooster_en_default: buckbooster-en-default-state {
 		pins = "gpio8";
 		function = "gpio";
@@ -123,6 +161,14 @@
 		bias-disable;
 	};
 
+	secondary_mic_default: secondary-mic-default-state {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
 	tsp_int_default: tsp-int-default-state {
 		pins = "gpio13";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
index fe59be3505fe..5ca2ada266f4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -135,6 +137,10 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5800000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -154,6 +160,14 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	model = "msm8916-1mic";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	extcon = <&muic>, <&muic>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
index 58c2f5a70e78..ba8650971d6a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
@@ -19,6 +19,10 @@
 	status = "disabled";
 };
 
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+};
+
 &touchscreen {
 	/* FIXME: Missing sm5703-mfd driver to power up vdd-supply */
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index 68da2a2d3077..5ce8f1350abc 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -319,6 +321,10 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5a00000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -350,6 +356,13 @@
 	no-1-8-v;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	status = "okay";
 	extcon = <&muic>, <&muic>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
index 6fe1850ba20e..f34997500891 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 };
 
-&led_r {
-	gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
 };
 
 &button_default {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
index 16d4a91022be..6cb3911ba1c9 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 };
 
-&led_r {
-	gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
 };
 
 &mpss {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
index 419f35c1fc92..510b3b3c4e3c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -25,6 +27,28 @@
 		stdout-path = "serial0";
 	};
 
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amp";
+		pinctrl-0 = <&speaker_amp_default>;
+		pinctrl-names = "default";
+	};
+
+	/*
+	 * This seems to be actually an analog switch that either routes audio
+	 * to the headphone jack or nowhere. Given that we need to enable a GPIO
+	 * to get sound on headphones, modelling it as simple-audio-amplifier
+	 * works just fine.
+	 */
+	headphones_switch: audio-switch {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Headphones Switch";
+		pinctrl-0 = <&headphones_switch_default>;
+		pinctrl-names = "default";
+	};
+
 	flash-led-controller {
 		compatible = "ocs,ocp8110";
 		enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
@@ -118,6 +142,7 @@
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l16>;
+		vio-supply = <&pm8916_l5>;
 
 		led@0 {
 			reg = <0>;
@@ -146,6 +171,18 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5100000>;
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -180,6 +217,30 @@
 	non-removable;
 };
 
+&sound {
+	/*
+	 * Provide widgets/pin-switches to allow enabling speaker and headphones
+	 * separately. Both are routed via the HPH_L/HPH_R pins of the codec.
+	 */
+	model = "wt88047";
+	widgets =
+		"Speaker", "Speaker",
+		"Headphone", "Headphones";
+	pin-switches = "Speaker", "Headphones";
+	audio-routing =
+		"Speaker", "Speaker Amp OUTL",
+		"Speaker", "Speaker Amp OUTR",
+		"Speaker Amp INL", "HPH_R",
+		"Speaker Amp INR", "HPH_R",
+		"Headphones", "Headphones Switch OUTL",
+		"Headphones", "Headphones Switch OUTR",
+		"Headphones Switch INL", "HPH_L",
+		"Headphones Switch INR", "HPH_R",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2";
+	aux-devs = <&speaker_amp>, <&headphones_switch>;
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -226,6 +287,13 @@
 		bias-pull-up;
 	};
 
+	headphones_switch_default: headphones-switch-default-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	imu_default: imu-default-state {
 		pins = "gpio115";
 		function = "gpio";
@@ -234,6 +302,13 @@
 		bias-disable;
 	};
 
+	speaker_amp_default: speaker-amp-default-state {
+		pins = "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	touchscreen_default: touchscreen-default-state {
 		touchscreen-pins {
 			pins = "gpio13";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
index 5e6ba8c58bb5..a98efcfe78b7 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
 };
 
-&led_r {
-	gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
 };
 
 &button_default {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 4f799b536a92..e423c57ddd41 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -539,9 +540,6 @@
 			compatible = "qcom,msm8916-bimc";
 			reg = <0x00400000 0x62000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@4a9000 {
@@ -574,18 +572,12 @@
 			compatible = "qcom,msm8916-pcnoc";
 			reg = <0x00500000 0x11000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
 		snoc: interconnect@580000 {
 			compatible = "qcom,msm8916-snoc";
 			reg = <0x00580000 0x14000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		stm: stm@802000 {
@@ -1989,6 +1981,54 @@
 
 				label = "hexagon";
 
+				apr: apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					q6core: service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
 				fastrpc {
 					compatible = "qcom,fastrpc";
 					qcom,smd-channels = "fastrpcsmd-apps-dsp";
@@ -2106,6 +2146,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp_uart1: serial@78af000 {
diff --git a/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
new file mode 100644
index 000000000000..3cec51891aed
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Huawei Honor 5X / GR5 (2016)";
+	compatible = "huawei,kiwi", "qcom,msm8939";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1600000>;
+			no-map;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@1e {
+		compatible = "kionix,kx023-1025";
+		reg = <0x1e>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+		mount-matrix = "-1", "0", "0",
+			       "0", "1", "0",
+			       "0", "0", "1";
+	};
+
+	proximity@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		led-max-microamp = <25000>;
+		amstaos,proximity-diodes = <0>;
+
+		pinctrl-0 = <&prox_irq_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@1c {
+		compatible = "cypress,tt21000";
+
+		reg = <0x1c>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		/*
+		 * NOTE: vdd is not directly supplied by pm8916_l16, it seems to be a
+		 * fixed regulator that is automatically enabled by pm8916_l16.
+		 */
+		vdd-supply = <&pm8916_l16>;
+		vddio-supply = <&pm8916_l16>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_l8 {
+	regulator-min-microvolt = <2950000>;
+	regulator-max-microvolt = <2950000>;
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	prox_irq_default: prox-irq-default-state {
+		pins = "gpio113";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		pins = "gpio12", "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
index 6802714fda3f..e3404c4455cf 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
@@ -8,6 +8,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 
 / {
@@ -120,6 +121,46 @@
 
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&status_led_default>;
+		pinctrl-names = "default";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
 &blsp_i2c3 {
 	status = "okay";
 
@@ -139,6 +180,7 @@
 	light-sensor@23 {
 		compatible = "liteon,ltr559";
 		reg = <0x23>;
+		proximity-near-level = <75>;
 
 		vdd-supply = <&pm8916_l17>;
 		vddio-supply = <&pm8916_l5>;
@@ -184,6 +226,16 @@
 	status = "okay";
 };
 
+&pm8916_gpios {
+	status_led_default: status-led-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		bias-disable;
+		output-high;
+	};
+};
+
 &pm8916_mpps {
 	pwm_out: mpp4-state {
 		pins = "mpp4";
@@ -247,6 +299,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	button_backlight_default: button-backlight-default-state {
 		pins = "gpio17";
diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
index fccd8fec8b8f..aa6c39482a2f 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
@@ -3,10 +3,12 @@
 /dts-v1/;
 
 #include "msm8939-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	model = "Samsung Galaxy A7 (2015)";
@@ -287,6 +289,18 @@
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	speaker_codec: audio-codec@34 {
+		compatible = "nxp,tfa9895";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l5>;
+		sound-name-prefix = "Speaker";
+		#sound-dai-cells = <0>;
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
@@ -309,6 +323,29 @@
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5800000>;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -321,6 +358,13 @@
 	};
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -335,6 +379,32 @@
 	status = "okay";
 };
 
+&sound {
+	model = "samsung-a2015";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	extcon = <&muic>, <&muic>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 324b5d26db40..82d85ff61045 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8939.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -601,9 +602,6 @@
 		bimc: interconnect@400000 {
 			compatible = "qcom,msm8939-bimc";
 			reg = <0x00400000 0x62000>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 			#interconnect-cells = <1>;
 		};
 
@@ -647,25 +645,16 @@
 		pcnoc: interconnect@500000 {
 			compatible = "qcom,msm8939-pcnoc";
 			reg = <0x00500000 0x11000>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 			#interconnect-cells = <1>;
 		};
 
 		snoc: interconnect@580000 {
 			compatible = "qcom,msm8939-snoc";
 			reg = <0x00580000 0x14080>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 			#interconnect-cells = <1>;
 
 			snoc_mm: interconnect-snoc {
 				compatible = "qcom,msm8939-snoc-mm";
-				clock-names = "bus", "bus_a";
-				clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>,
-					 <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>;
 				#interconnect-cells = <1>;
 			};
 		};
@@ -1537,6 +1526,20 @@
 			#interrupt-cells = <4>;
 		};
 
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,msm8916-mss-pil";
 			reg = <0x04080000 0x100>, <0x04020000 0x040>;
@@ -1569,6 +1572,22 @@
 			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
 			status = "disabled";
 
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
+
+				interrupt-parent = <&hexagon_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
+
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
 			mba {
 				memory-region = <&mba_mem>;
 			};
@@ -1585,6 +1604,54 @@
 				qcom,remote-pid = <1>;
 
 				label = "hexagon";
+
+				apr: apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					q6core: service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
 			};
 		};
 
@@ -1682,6 +1749,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp_uart1: serial@78af000 {
@@ -2116,6 +2184,8 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			/* Necessary because firmware does not configure this correctly */
+			clock-frequency = <19200000>;
 
 			frame@b121000 {
 				reg = <0x0b121000 0x1000>,
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
index ed95d09cedb1..6b9245cd8b0c 100644
--- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
@@ -111,6 +111,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
index 61ff629c9bf3..9ac4f507e321 100644
--- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
@@ -104,6 +104,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
index 1a1d3f92a511..b0588f30f8f1 100644
--- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
@@ -113,6 +113,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index e7de7632669a..ad2f8cf9c966 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -174,10 +174,10 @@
 		};
 	};
 
-	memory {
+	memory@10000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
-		reg = <0 0 0 0>;
+		reg = <0 0x10000000 0 0>;
 	};
 
 	pmu {
@@ -726,6 +726,48 @@
 				bias-disable;
 			};
 
+			spi_3_default: spi-3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_spi3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_3_sleep: spi-3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_5_default: spi-5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_spi5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_5_sleep: spi-5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_6_default: spi-6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_spi6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_6_sleep: spi-6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			wcnss_pin_a: wcnss-active-state {
 
 				wcss-wlan2-pins {
@@ -1004,7 +1046,7 @@
 
 		apps_iommu: iommu@1e20000 {
 			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
-			ranges  = <0 0x01e20000 0x20000>;
+			ranges = <0 0x01e20000 0x20000>;
 
 			clocks = <&gcc GCC_SMMU_CFG_CLK>,
 				 <&gcc GCC_APSS_TCU_ASYNC_CLK>;
@@ -1360,6 +1402,26 @@
 			status = "disabled";
 		};
 
+		spi_3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_3_default>;
+			pinctrl-1 = <&spi_3_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_4: i2c@78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b8000 0x600>;
@@ -1413,6 +1475,26 @@
 			status = "disabled";
 		};
 
+		spi_5: spi@7af5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				<&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_5_default>;
+			pinctrl-1 = <&spi_5_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_6: i2c@7af6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af6000 0x600>;
@@ -1433,6 +1515,26 @@
 			status = "disabled";
 		};
 
+		spi_6: spi@7af6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_6_default>;
+			pinctrl-1 = <&spi_6_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_7: i2c@7af7000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af7000 0x600>;
@@ -1645,7 +1747,7 @@
 				apr {
 					compatible = "qcom,apr-v2";
 					qcom,smd-channels = "apr_audio_svc";
-					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					qcom,domain = <APR_DOMAIN_ADSP>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 6ba9da9e6a8b..ee6f87c828ae 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -444,6 +444,19 @@
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
+	etm {
+		compatible = "qcom,coresight-remote-etm";
+
+		out-ports {
+			port {
+				modem_etm_out_funnel_in2: endpoint {
+					remote-endpoint =
+					  <&funnel_in2_in_modem_etm>;
+				};
+			};
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -779,10 +792,10 @@
 				 <&pciephy_0>,
 				 <&pciephy_1>,
 				 <&pciephy_2>,
-				 <&ssusb_phy_0>,
-				 <&ufsphy_lane 0>,
-				 <&ufsphy_lane 1>,
-				 <&ufsphy_lane 2>;
+				 <&usb3phy>,
+				 <&ufsphy 0>,
+				 <&ufsphy 1>,
+				 <&ufsphy 2>;
 			clock-names = "cxo",
 				      "cxo2",
 				      "sleep_clk",
@@ -799,9 +812,6 @@
 			compatible = "qcom,msm8996-bimc";
 			reg = <0x00408000 0x5a000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens0: thermal-sensor@4a9000 {
@@ -852,18 +862,12 @@
 			compatible = "qcom,msm8996-cnoc";
 			reg = <0x00500000 0x1000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		snoc: interconnect@524000 {
 			compatible = "qcom,msm8996-snoc";
 			reg = <0x00524000 0x1c000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		a0noc: interconnect@543000 {
@@ -883,19 +887,14 @@
 			compatible = "qcom,msm8996-a1noc";
 			reg = <0x00562000 0x5000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
 		};
 
 		a2noc: interconnect@583000 {
 			compatible = "qcom,msm8996-a2noc";
 			reg = <0x00583000 0x7000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+			clock-names = "aggre2_ufs_axi", "ufs_axi";
+			clocks = <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 				 <&gcc GCC_UFS_AXI_CLK>;
 		};
 
@@ -903,19 +902,14 @@
 			compatible = "qcom,msm8996-mnoc";
 			reg = <0x005a4000 0x1c000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "iface";
-			clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
-				 <&rpmcc RPM_SMD_MMAXI_A_CLK>,
-				 <&mmcc AHB_CLK_SRC>;
+			clock-names = "iface";
+			clocks = <&mmcc AHB_CLK_SRC>;
 		};
 
 		pnoc: interconnect@5c0000 {
 			compatible = "qcom,msm8996-pnoc";
 			reg = <0x005c0000 0x3000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
 		tcsr_mutex: hwlock@740000 {
@@ -2047,7 +2041,7 @@
 			reg = <0x00624000 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 
-			phys = <&ufsphy_lane>;
+			phys = <&ufsphy>;
 			phy-names = "ufsphy";
 
 			power-domains = <&gcc UFS_GDSC>;
@@ -2100,25 +2094,18 @@
 
 		ufsphy: phy@627000 {
 			compatible = "qcom,msm8996-qmp-ufs-phy";
-			reg = <0x00627000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00627000 0x1000>;
 
 			clocks = <&gcc GCC_UFS_CLKREF_CLK>;
 			clock-names = "ref";
 
 			resets = <&ufshc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufsphy_lane: phy@627400 {
-				reg = <0x627400 0x12c>,
-				      <0x627600 0x200>,
-				      <0x627c00 0x1b4>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		camss: camss@a34000 {
@@ -2453,9 +2440,8 @@
 					  "handover",
 					  "stop-ack";
 
-			clocks = <&xo_board>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "xo", "aggre2";
+			clocks = <&xo_board>;
+			clock-names = "xo";
 
 			memory-region = <&slpi_mem>;
 
@@ -2500,10 +2486,15 @@
 				 <&gcc GCC_MSS_GPLL0_DIV_CLK>,
 				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
 				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_CLK>,
 				 <&rpmcc RPM_SMD_QDSS_CLK>;
-			clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
-				      "snoc_axi", "mnoc_axi", "pnoc", "qdss";
+			clock-names = "iface",
+				      "bus",
+				      "mem",
+				      "xo",
+				      "gpll0_mss",
+				      "snoc_axi",
+				      "mnoc_axi",
+				      "qdss";
 
 			resets = <&gcc GCC_MSS_RESTART>;
 			reset-names = "mss_restart";
@@ -2644,6 +2635,14 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
+			in-ports {
+				port {
+					funnel_in2_in_modem_etm: endpoint {
+						remote-endpoint =
+						  <&modem_etm_out_funnel_in2>;
+					};
+				};
+			};
 
 			out-ports {
 				port {
@@ -3056,7 +3055,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x06a00000 0xcc00>;
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+				phys = <&hsusb_phy1>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,hird-threshold = /bits/ 8 <0>;
 				snps,dis_u2_susphy_quirk;
@@ -3068,32 +3067,26 @@
 
 		usb3phy: phy@7410000 {
 			compatible = "qcom,msm8996-qmp-usb3-phy";
-			reg = <0x07410000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x07410000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
-				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_CLKREF_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
-				<&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
-			status = "disabled";
-
-			ssusb_phy_0: phy@7410200 {
-				reg = <0x07410200 0x200>,
-				      <0x07410400 0x130>,
-				      <0x07410600 0x1a8>;
-				#phy-cells = <0>;
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-				#clock-cells = <0>;
-				clock-output-names = "usb3_phy_pipe_clk_src";
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-			};
+			status = "disabled";
 		};
 
 		hsusb_phy1: phy@7411000 {
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index b485bf925ce6..2793cc22d381 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -933,7 +933,7 @@
 				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
 			reg = <0x01c00000 0x2000>,
 			      <0x1b000000 0xf1d>,
@@ -1004,7 +1004,7 @@
 			compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x01da4000 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufsphy_lanes>;
+			phys = <&ufsphy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_GDSC>;
@@ -1045,11 +1045,7 @@
 
 		ufsphy: phy@1da7000 {
 			compatible = "qcom,msm8998-qmp-ufs-phy";
-			reg = <0x01da7000 0x18c>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges;
+			reg = <0x01da7000 0x1000>;
 
 			clock-names =
 				"ref",
@@ -1061,14 +1057,8 @@
 			reset-names = "ufsphy";
 			resets = <&ufshc 0>;
 
-			ufsphy_lanes: phy@1da7400 {
-				reg = <0x01da7400 0x128>,
-				      <0x01da7600 0x1fc>,
-				      <0x01da7c00 0x1dc>,
-				      <0x01da7800 0x128>,
-				      <0x01da7a00 0x1fc>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		tcsr_mutex: hwlock@1f40000 {
@@ -1615,9 +1605,8 @@
 
 			px-supply = <&vreg_lvs2a_1p8>;
 
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "xo", "aggre2";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
 
 			memory-region = <&slpi_mem>;
 
@@ -2031,9 +2020,11 @@
 
 			cpu = <&CPU4>;
 
-			port {
-				etm4_out: endpoint {
-					remote-endpoint = <&apss_funnel_in4>;
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
 				};
 			};
 		};
@@ -2048,9 +2039,11 @@
 
 			cpu = <&CPU5>;
 
-			port {
-				etm5_out: endpoint {
-					remote-endpoint = <&apss_funnel_in5>;
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
 				};
 			};
 		};
@@ -2065,9 +2058,11 @@
 
 			cpu = <&CPU6>;
 
-			port {
-				etm6_out: endpoint {
-					remote-endpoint = <&apss_funnel_in6>;
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
 				};
 			};
 		};
@@ -2082,9 +2077,11 @@
 
 			cpu = <&CPU7>;
 
-			port {
-				etm7_out: endpoint {
-					remote-endpoint = <&apss_funnel_in7>;
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
 				};
 			};
 		};
@@ -2149,7 +2146,7 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&qusb2phy>, <&usb1_ssphy>;
+				phys = <&qusb2phy>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -2158,33 +2155,26 @@
 
 		usb3phy: phy@c010000 {
 			compatible = "qcom,msm8998-qmp-usb3-phy";
-			reg = <0x0c010000 0x18c>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x0c010000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@c010200 {
-				reg = <0xc010200 0x128>,
-				      <0xc010400 0x200>,
-				      <0xc010c00 0x20c>,
-				      <0xc010600 0x128>,
-				      <0xc010800 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb2phy: phy@c012000 {
diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
index df0afe82f250..3bf7cf5d1700 100644
--- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
@@ -148,7 +148,7 @@
 			status = "disabled";
 		};
 
-		pm7250b_gpios: pinctrl@c000 {
+		pm7250b_gpios: gpio@c000 {
 			compatible = "qcom,pm7250b-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi
index db3d5c17a77d..797a18c249a4 100644
--- a/arch/arm64/boot/dts/qcom/pm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi
@@ -64,9 +64,6 @@
 
 		pm8550_pwm: pwm {
 			compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
 			#pwm-cells = <2>;
 
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
index c47646a467be..4dc1f03ab2c7 100644
--- a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
@@ -33,16 +33,16 @@
 
 
 &spmi_bus {
-	pm8550ve: pmic@5 {
+	pm8550ve: pmic@PMK8550VE_SID {
 		compatible = "qcom,pm8550", "qcom,spmi-pmic";
-		reg = <0x5 SPMI_USID>;
+		reg = <PMK8550VE_SID SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		pm8550ve_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <PMK8550VE_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index f4de86787743..4b2e8fb47d2d 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -41,6 +41,35 @@
 			};
 		};
 
+		pm8916_charger: charger@1000 {
+			compatible = "qcom,pm8916-lbc";
+			reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>;
+			reg-names = "chgr", "bat_if", "usb", "misc";
+
+			interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "vbat_det",
+					  "fast_chg",
+					  "chg_fail",
+					  "chg_done",
+					  "bat_pres",
+					  "temp_ok",
+					  "coarse_det",
+					  "usb_vbus",
+					  "chg_gone",
+					  "overtemp";
+
+			status = "disabled";
+		};
+
 		pm8916_usbin: usb-detect@1300 {
 			compatible = "qcom,pm8941-misc";
 			reg = <0x1300>;
@@ -91,6 +120,25 @@
 			};
 		};
 
+		pm8916_bms: battery@4000 {
+			compatible = "qcom,pm8916-bms-vm";
+			reg = <0x4000>;
+			interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "cv_leave",
+					  "cv_enter",
+					  "ocv_good",
+					  "ocv_thr",
+					  "fifo",
+					  "state_chg";
+
+			status = "disabled";
+		};
+
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>, <0x6100>;
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 1eb74017062d..f0ed15458dd7 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -22,7 +22,7 @@
 		mode-bootloader = <0x02>;
 	};
 };
-	
+
 &spmi_bus {
 	pmk8350: pmic@PMK8350_SID {
 		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index d46e591e72b5..0911fb08ed63 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -5,12 +5,15 @@
  * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
 #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,qcm2290.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 
 / {
@@ -150,6 +153,8 @@
 			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
 			clock-names = "core";
 			#reset-cells = <1>;
+			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
 		};
 	};
 
@@ -194,6 +199,7 @@
 
 		CLUSTER_PD: power-domain-cpu-cluster {
 			#power-domain-cells = <0>;
+			power-domains = <&mpm>;
 			domain-idle-states = <&CLUSTER_SLEEP>;
 		};
 	};
@@ -261,6 +267,24 @@
 				};
 			};
 		};
+
+		mpm: interrupt-controller {
+			compatible = "qcom,mpm";
+			qcom,rpm-msg-ram = <&apss_mpm>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apcs_glb 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#power-domain-cells = <0>;
+			interrupt-parent = <&intc>;
+			qcom,mpm-pin-count = <96>;
+			qcom,mpm-pin-map = <2 275>,  /* TSENS0 uplow */
+					   <5 296>,  /* Soundwire master_irq */
+					   <12 422>, /* DWC3 ss_phy_irq */
+					   <24 79>,  /* Soundwire wake_irq */
+					   <86 183>, /* MPM wake, SPMI */
+					   <90 260>; /* QUSB2_PHY DP+DM */
+		};
 	};
 
 	reserved_memory: reserved-memory {
@@ -424,6 +448,7 @@
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			gpio-ranges = <&tlmm 0 0 127>;
+			wakeup-parent = <&mpm>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -668,6 +693,33 @@
 			status = "disabled";
 		};
 
+		system_noc: interconnect@1880000 {
+			compatible = "qcom,qcm2290-snoc";
+			reg = <0x0 0x01880000 0x0 0x60200>;
+			#interconnect-cells = <2>;
+
+			qup_virt: interconnect-qup {
+				compatible = "qcom,qcm2290-qup-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmnrt_virt: interconnect-mmnrt {
+				compatible = "qcom,qcm2290-mmnrt-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmrt_virt: interconnect-mmrt {
+				compatible = "qcom,qcm2290-mmrt-virt";
+				#interconnect-cells = <2>;
+			};
+		};
+
+		config_noc: interconnect@1900000 {
+			compatible = "qcom,qcm2290-cnoc";
+			reg = <0x0 0x01900000 0x0 0x8200>;
+			#interconnect-cells = <2>;
+		};
+
 		qfprom@1b44000 {
 			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b44000 0x0 0x3000>;
@@ -680,6 +732,60 @@
 			};
 		};
 
+		pmu@1b8e300 {
+			compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x01b8e300 0x0 0x600>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+					 &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <(1353 * 4 * 1000)>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+			};
+		};
+
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x01c40000 0x0 0x1100>,
@@ -692,7 +798,7 @@
 				    "obsrvr",
 				    "intr",
 				    "cnfg";
-			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "periph_irq";
 			qcom,ee = <0>;
 			qcom,channel = <0>;
@@ -707,8 +813,8 @@
 			reg = <0x0 0x04411000 0x0 0x1ff>,
 			      <0x0 0x04410000 0x0 0x8>;
 			#qcom,sensors = <10>;
-			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -720,9 +826,22 @@
 			clock-names = "core";
 		};
 
+		bimc: interconnect@4480000 {
+			compatible = "qcom,qcm2290-bimc";
+			reg = <0x0 0x04480000 0x0 0x80000>;
+			#interconnect-cells = <2>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
-			compatible = "qcom,rpm-msg-ram";
+			compatible = "qcom,rpm-msg-ram", "mmio-sram";
 			reg = <0x0 0x045f0000 0x0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x045f0000 0x7000>;
+
+			apss_mpm: sram@1b8 {
+				reg = <0x1b8 0x48>;
+			};
 		};
 
 		sram@4690000 {
@@ -755,13 +874,45 @@
 			resets = <&gcc GCC_SDCC1_BCR>;
 
 			power-domains = <&rpmpd QCM2290_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
 			iommus = <&apps_smmu 0xc0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			qcom,dll-config = <0x000f642c>;
 			qcom,ddr-config = <0x80040868>;
 			bus-width = <8>;
 
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <102400 65000>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+			};
 		};
 
 		sdhc_2: mmc@4784000 {
@@ -785,6 +936,12 @@
 			power-domains = <&rpmpd QCM2290_VDDCX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 			iommus = <&apps_smmu 0xa0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
@@ -798,11 +955,15 @@
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <261438 150000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -850,6 +1011,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -866,6 +1036,12 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -879,6 +1055,12 @@
 				clock-names = "se";
 				pinctrl-0 = <&qup_uart0_default>;
 				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -893,6 +1075,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -909,6 +1100,12 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -925,6 +1122,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -941,6 +1147,12 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -957,6 +1169,15 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -973,6 +1194,12 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -989,6 +1216,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1005,6 +1241,12 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1018,6 +1260,12 @@
 				clock-names = "se";
 				pinctrl-0 = <&qup_uart4_default>;
 				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1032,6 +1280,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1048,6 +1305,12 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1057,9 +1320,10 @@
 		usb: usb@4ef8800 {
 			compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
 			reg = <0x0 0x04ef8800 0x0 0x400>;
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -1080,6 +1344,13 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			/* TODO: USB<->IPA path */
+			interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
 			wakeup-source;
 
 			#address-cells = <2>;
@@ -1105,6 +1376,225 @@
 			};
 		};
 
+		mdss: display-subsystem@5e00000 {
+			compatible = "qcom,qcm2290-mdss";
+			reg = <0x0 0x05e00000 0x0 0x1000>;
+			reg-names = "mdss";
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core";
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x420 0x2>,
+				 <&apps_smmu 0x421 0x0>;
+			interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@5e01000 {
+				compatible = "qcom,qcm2290-dpu";
+				reg = <0x0 0x05e01000 0x0 0x8f000>,
+				      <0x0 0x05eb0000 0x0 0x2008>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "core",
+					      "lut",
+					      "vsync";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd QCM2290_VDDCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-192000000 {
+						opp-hz = /bits/ 64 <192000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-256000000 {
+						opp-hz = /bits/ 64 <256000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-307200000 {
+						opp-hz = /bits/ 64 <307200000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-384000000 {
+						opp-hz = /bits/ 64 <384000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@5e94000 {
+				compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x05e94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd QCM2290_VDDCX>;
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@5e94400 {
+				compatible = "qcom,dsi-phy-14nm-2290";
+				reg = <0x0 0x05e94400 0x0 0x100>,
+				      <0x0 0x05e94500 0x0 0x300>,
+				      <0x0 0x05e94800 0x0 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				power-domains = <&rpmpd QCM2290_VDDMX>;
+				required-opps = <&rpmpd_opp_nom>;
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@5f00000 {
+			compatible = "qcom,qcm2290-dispcc";
+			reg = <0x0 0x05f00000 0x0 0x20000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk";
+			#power-domain-cells = <1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		remoteproc_mpss: remoteproc@6080000 {
 			compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
 			reg = <0x0 0x06080000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index 2de0b8c26c35..176898c9dbbd 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -9,6 +9,8 @@
 #define PM7250B_SID 8
 #define PM7250B_SID1 9
 
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -75,26 +77,11 @@
 			no-map;
 		};
 
-		adsp_mem: adsp@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
-		};
-
 		cdsp_mem: cdsp@88f00000 {
 			reg = <0x0 0x88f00000 0x0 0x1e00000>;
 			no-map;
 		};
 
-		mpss_mem: mpss@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
-		wpss_mem: wpss@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
-
 		rmtfs_mem: memory@f8500000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0xf8500000 0x0 0x600000>;
@@ -134,6 +121,106 @@
 		enable-active-high;
 		vin-supply = <&vreg_bob>;
 	};
+
+	thermal-zones {
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		chg-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rear-cam-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 4>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		sdm-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -182,8 +269,9 @@
 		};
 
 		vreg_l7b: ldo7 {
-			regulator-min-microvolt = <2400000>;
-			regulator-max-microvolt = <3544000>;
+			/* Constrained for UFS VCC, at least until UFS driver scales voltage */
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -425,6 +513,42 @@
 	status = "okay";
 };
 
+&pm7250b_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "charger_skin_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "conn_therm";
+	};
+};
+
+&pm7250b_adc_tm {
+	status = "okay";
+
+	charger-skin-therm@0 {
+		reg = <0>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	conn-therm@1 {
+		reg = <1>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
 &pm7325_gpios {
 	volume_down_default: volume-down-default-state {
 		pins = "gpio6";
@@ -448,10 +572,93 @@
 	};
 };
 
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	cam-flash-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	sdm-skin-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wide-rfc-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
 &pmk8350_rtc {
 	status = "okay";
 };
 
+&pmk8350_vadc {
+	status = "okay";
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_xo_therm";
+	};
+
+	channel@144 {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_quiet_therm";
+	};
+
+	channel@145 {
+		reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_cam_flash_therm";
+	};
+
+	channel@146 {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_sdm_skin_therm";
+	};
+
+	channel@147 {
+		reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_wide_rfc_therm";
+	};
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -489,6 +696,26 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/qcm6490/fairphone5/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcm6490/fairphone5/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcm6490/fairphone5/modem.mbn";
+	status = "okay";
+};
+
+&remoteproc_wpss {
+	firmware-name = "qcom/qcm6490/fairphone5/wpss.mbn";
+	status = "okay";
+};
+
 &sdc2_clk {
 	drive-strength = <16>;
 	bias-disable;
@@ -632,6 +859,28 @@
 	};
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b>;
+	vcc-max-microamp = <800000>;
+	/*
+	 * Technically l9b enables an eLDO (supplied by s1b) which then powers
+	 * VCCQ2 of the UFS.
+	 */
+	vccq-supply = <&vreg_l9b>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c>;
+	vdda-pll-supply = <&vreg_l6b>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };
@@ -665,3 +914,8 @@
 
 	status = "okay";
 };
+
+&wifi {
+	qcom,ath11k-calibration-variant = "Fairphone_5";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
new file mode 100644
index 000000000000..03e97e27d16d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCM6490 IDP";
+	compatible = "qcom,qcm6490-idp", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+			reg = <0x0 0x81800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84300000 {
+			reg = <0x0 0x84300000 0x0 0x500000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@84800000 {
+			reg = <0x0 0x84800000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		video_mem: video@8a700000 {
+			reg = <0x0 0x8a700000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8ae00000 {
+			reg = <0x0 0x8ae00000 0x0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b300000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b310000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8b31a000 {
+			reg = <0x0 0x8b31a000 0x0 0x2000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted_apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <4350000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l3-supply = <&vreg_s2b_0p876>;
+		vdd-l5-supply = <&vreg_s2b_0p876>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s2b_0p876: smps2 {
+			regulator-min-microvolt = <570070>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p752: ldo4 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <820000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		reg_l5b_0p752: ldo5 {
+			regulator-min-microvolt = <552000>;
+			regulator-max-microvolt = <832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s2c_0p752: smps2 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s5c_0p752: smps5 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7c_0p752: smps7 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <35440000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&sdhc_1 {
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	vmmc-supply = <&vreg_l7b_2p952>;
+	vqmmc-supply = <&vreg_l19b_1p8>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 2>, /* ADSP */
+			       <48 4>; /* NFC */
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	status = "okay";
+};
+
+&wifi {
+	memory-region = <&wlan_fw_mem>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 2721f32dfb71..2f2eeaf2e945 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -558,9 +558,6 @@
 			reg = <0x00400000 0x80000>;
 			compatible = "qcom,qcs404-bimc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				<&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@4a9000 {
@@ -601,18 +598,12 @@
 			reg = <0x00500000 0x15080>;
 			compatible = "qcom,qcs404-pcnoc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-				<&rpmcc RPM_SMD_PNOC_A_CLK>;
 		};
 
 		snoc: interconnect@580000 {
 			reg = <0x00580000 0x23080>;
 			compatible = "qcom,qcs404-snoc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				<&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		remoteproc_cdsp: remoteproc@b00000 {
@@ -1461,7 +1452,7 @@
 			};
 		};
 
-		pcie: pci@10000000 {
+		pcie: pcie@10000000 {
 			compatible = "qcom,pcie-qcs404";
 			reg = <0x10000000 0xf1d>,
 			      <0x10000f20 0xa8>,
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
new file mode 100644
index 000000000000..8bb7d13d85f6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Qualcomm Technologies, Inc. Robotics RB3gen2";
+	compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+			reg = <0x0 0x81800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84300000 {
+			reg = <0x0 0x84300000 0x0 0x500000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@84800000 {
+			reg = <0x0 0x84800000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		video_mem: video@8a700000 {
+			reg = <0x0 0x8a700000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8ae00000 {
+			reg = <0x0 0x8ae00000 0x0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b300000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b310000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8b31a000 {
+			reg = <0x0 0x8b31a000 0x0 0x2000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted_apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <4350000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l3-supply = <&vreg_s2b_0p876>;
+		vdd-l5-supply = <&vreg_s2b_0p876>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s2b_0p876: smps2 {
+			regulator-min-microvolt = <570070>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p752: ldo4 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <820000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		reg_l5b_0p752: ldo5 {
+			regulator-min-microvolt = <552000>;
+			regulator-max-microvolt = <832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s2c_0p752: smps2 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s5c_0p752: smps5 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7c_0p752: smps7 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <35440000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 2>, /* ADSP */
+			       <48 4>; /* NFC */
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	status = "okay";
+};
+
+&wifi {
+	memory-region = <&wlan_fw_mem>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 1c0e5d271e91..832f472c4b7a 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -381,6 +381,20 @@
 			#power-domain-cells = <1>;
 		};
 
+		ecpricc: clock-controller@280000 {
+			compatible = "qcom,qdu1000-ecpricc";
+			reg = <0x0 0x00280000 0x0 0x31c00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		gpi_dma0: dma-controller@900000  {
 			compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x900000 0x0 0x60000>;
@@ -1446,13 +1460,10 @@
 		system-cache-controller@19200000 {
 			compatible = "qcom,qdu1000-llcc";
 			reg = <0 0x19200000 0 0xd80000>,
-			      <0 0x1a200000 0 0x80000>,
-			      <0 0x221c8128 0 0x4>;
-			reg-names = "llcc_base",
-				    "llcc_broadcast_base",
-				    "multi_channel_register";
+			      <0 0x1a200000 0 0x80000>;
+			reg-names = "llcc0_base",
+				    "llcc_broadcast_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-			multi-ch-bit-off = <24 2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index 94885b9c21c8..aa53b6af6d9c 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -23,6 +23,14 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	clocks {
+		clk40M: can-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+			#clock-cells = <0>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "gpio-keys";
@@ -40,6 +48,17 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -158,6 +177,68 @@
 	};
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+		interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_hdmi_out_1p2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm2250_l5>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
 &pm2250_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -376,7 +457,34 @@
 	status = "okay";
 };
 
+&spi5 {
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2518fd";
+		reg = <0>;
+		interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&clk40M>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&vdc_5v>;
+		xceiver-supply = <&vdc_5v>;
+	};
+};
+
 &tlmm {
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio41";
+		function = "gpio";
+		input-disable;
+		output-high;
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio46";
+		function = "gpio";
+		bias-disable;
+	};
+
 	sd_det_in_on: sd-det-in-on-state {
 		pins = "gpio88";
 		function = "gpio";
@@ -415,6 +523,10 @@
 	status = "okay";
 };
 
+&usb_dwc3 {
+	dr_mode = "host";
+};
+
 &usb_hsphy {
 	vdd-supply = <&pm2250_l12>;
 	vdda-pll-supply = <&pm2250_l13>;
@@ -427,6 +539,7 @@
 	vdd-1.8-xo-supply = <&pm2250_l13>;
 	vdd-1.3-rfa-supply = <&pm2250_l10>;
 	vdd-3.3-ch0-supply = <&pm2250_l22>;
+	qcom,ath10k-calibration-variant = "Thundercomm_RB1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index a7278a9472ed..7c19f874fa71 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -15,6 +15,7 @@
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &uart3;
 	};
 
 	chosen {
@@ -280,6 +281,12 @@
 	status = "okay";
 };
 
+&remoteproc_mpss {
+	firmware-name = "qcom/qrb4210/modem.mbn";
+
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -346,13 +353,14 @@
 		};
 
 		vreg_l8a_0p664: l8 {
-			regulator-min-microvolt = <400000>;
-			regulator-max-microvolt = <728000>;
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <640000>;
 		};
 
 		vreg_l9a_1p8: l9 {
 			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10a_1p8: l10 {
@@ -389,11 +397,13 @@
 		vreg_l16a_1p3: l16 {
 			regulator-min-microvolt = <1704000>;
 			regulator-max-microvolt = <1904000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l17a_1p3: l17 {
 			regulator-min-microvolt = <1152000>;
 			regulator-max-microvolt = <1384000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l18a_1p232: l18 {
@@ -424,8 +434,9 @@
 		};
 
 		vreg_l23a_3p3: l23 {
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l24a_2p96: l24 {
@@ -487,6 +498,66 @@
 			       <56 3>, <61 2>, <64 1>,
 			       <68 1>, <72 8>, <96 1>;
 
+	uart3_default: uart3-default-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart3_sleep: uart3-sleep-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	lt9611_rst_pin: lt9611-rst-state {
 		pins = "gpio41";
 		function = "gpio";
@@ -508,6 +579,26 @@
 	};
 };
 
+&uart3 {
+	interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
+	pinctrl-0 = <&uart3_default>;
+	pinctrl-1 = <&uart3_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3988-bt";
+
+		vddio-supply = <&vreg_l9a_1p8>;
+		vddxo-supply = <&vreg_l16a_1p3>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l23a_3p3>;
+		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		max-speed = <3200000>;
+	};
+};
+
 &uart4 {
 	status = "okay";
 };
@@ -518,7 +609,6 @@
 
 &usb_dwc3 {
 	maximum-speed = "super-speed";
-	dr_mode = "peripheral";
 };
 
 &usb_hsphy {
@@ -536,6 +626,16 @@
 	status = "okay";
 };
 
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>;
+	vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
+	qcom,ath10k-calibration-variant = "Thundercomm_RB2";
+
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
index bb149e577914..edc0e42ee017 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
@@ -46,7 +46,7 @@
 		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
 		assigned-clock-rates = <24000000>;
 
-		dovdd-supply  = <&vreg_l7f_1p8>;
+		dovdd-supply = <&vreg_l7f_1p8>;
 		avdd-supply = <&vdc_5v>;
 		dvdd-supply = <&vdc_5v>;
 
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index c8cd40a462a3..cd0db4f31d4a 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -23,6 +23,7 @@
 
 	aliases {
 		serial0 = &uart12;
+		serial1 = &uart6;
 		sdhc2 = &sdhc_2;
 	};
 
@@ -64,8 +65,8 @@
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
 			default-state = "off";
+			panic-indicator;
 		};
 
 		led-wlan {
@@ -1263,6 +1264,14 @@
 		"HST_WLAN_UART_TX",
 		"HST_WLAN_UART_RX";
 
+	bt_en_state: bt-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+
 	lt9611_irq_pin: lt9611-irq-state {
 		pins = "gpio63";
 		function = "gpio";
@@ -1296,6 +1305,26 @@
 	};
 };
 
+&uart6 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6390-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_state>;
+
+		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddpmu-supply = <&vreg_s2f_0p95>;
+		vddaon-supply = <&vreg_s6a_0p95>;
+		vddrfa0p9-supply = <&vreg_s2f_0p95>;
+		vddrfa1p3-supply = <&vreg_s8c_1p3>;
+		vddrfa1p9-supply = <&vreg_s5a_1p9>;
+	};
+};
+
 &uart12 {
 	status = "okay";
 };
@@ -1425,7 +1454,7 @@
 
 		altmodes {
 			displayport {
-				svid = <0xff01>;
+				svid = /bits/ 16 <0xff01>;
 				vdo = <0x00001c46>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 9760bb4b468c..26ad05bd3b3f 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -461,6 +461,11 @@
 			  "ANALOG_PON_OPT";
 };
 
+&pmm8654au_0_pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
 &pmm8654au_1_gpios {
 	gpio-line-names = "PMIC_C_ID0",
 			  "PMIC_C_ID1",
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index b6a93b11cbbd..a7eaca33d326 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -1487,6 +1487,11 @@
 			};
 		};
 
+		rng: rng@10d2000 {
+			compatible = "qcom,sa8775p-trng", "qcom,trng";
+			reg = <0 0x010d2000 0 0x1000>;
+		};
+
 		ufs_mem_hc: ufs@1d84000 {
 			compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>;
@@ -1610,8 +1615,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
@@ -1697,8 +1702,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 7 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
@@ -1760,8 +1765,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 10 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 9 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -1910,6 +1915,50 @@
 			interrupt-controller;
 		};
 
+		tsens2: thermal-sensor@c251000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c251000 0x0 0x1ff>,
+			      <0x0 0x0c224000 0x0 0x8>;
+			interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <13>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens3: thermal-sensor@c252000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c252000 0x0 0x1ff>,
+			      <0x0 0x0c225000 0x0 0x8>;
+			interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <13>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c263000 0x0 0x1ff>,
+			      <0x0 0x0c222000 0x0 0x8>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <12>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c265000 0x0 0x1ff>,
+			      <0x0 0x0c223000 0x0 0x8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <12>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		aoss_qmp: power-management@c300000 {
 			compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x400>;
@@ -1920,6 +1969,11 @@
 			#clock-cells = <0>;
 		};
 
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x0c440000 0x0 0x1100>,
@@ -2181,7 +2235,7 @@
 			compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt";
 			reg = <0x0 0x17c10000 0x0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		memtimer: timer@17c20000 {
@@ -2401,6 +2455,1058 @@
 		};
 	};
 
+	thermal-zones {
+		aoss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-3-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		audio-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pcie-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-0-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-3-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-4-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-5-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pcie-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-0-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-3-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		ddrss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-1-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-3-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		ddrss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-1-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
 	arch_timer: timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
@@ -2409,7 +3515,7 @@
 			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	pcie0: pci@1c00000{
+	pcie0: pcie@1c00000 {
 		compatible = "qcom,pcie-sa8775p";
 		reg = <0x0 0x01c00000 0x0 0x3000>,
 		      <0x0 0x40000000 0x0 0xf20>,
@@ -2509,7 +3615,7 @@
 		status = "disabled";
 	};
 
-	pcie1: pci@1c10000{
+	pcie1: pcie@1c10000 {
 		compatible = "qcom,pcie-sa8775p";
 		reg = <0x0 0x01c10000 0x0 0x3000>,
 		      <0x0 0x60000000 0x0 0xf20>,
diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
index dbb48934d499..5afcb8212f49 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "sc7180.dtsi"
@@ -129,6 +130,113 @@
 		pinctrl-names = "default";
 	};
 
+	sound: sound {
+		compatible = "qcom,sc7180-qdsp6-sndcard";
+		pinctrl-0 = <&pri_mi2s_active>, <&pri_mi2s_mclk_active>, <&ter_mi2s_active>;
+		pinctrl-names = "default";
+		model = "Acer-Aspire-1";
+
+		audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		multimedia1-dai-link {
+			link-name = "MultiMedia1";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+			};
+		};
+
+		multimedia2-dai-link {
+			link-name = "MultiMedia2";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+			};
+		};
+
+		multimedia3-dai-link {
+			link-name = "MultiMedia3";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+			};
+		};
+
+		multimedia4-dai-link {
+			link-name = "MultiMedia4";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+			};
+		};
+
+		primary-rx-dai-link {
+			link-name = "Primary MI2S Playback";
+
+			cpu {
+				sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0>;
+			};
+		};
+
+		primary-tx-dai-link {
+			link-name = "Primary MI2S Capture";
+
+			cpu {
+				sound-dai = <&q6afedai PRIMARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0>;
+			};
+		};
+
+		tertiary-rx-dai-link {
+			link-name = "Tertiary MI2S Playback";
+
+			cpu {
+				sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&max98357a>;
+			};
+		};
+
+		displayport-rx-dai-link {
+			link-name = "DisplayPort Playback";
+
+			cpu {
+				sound-dai = <&q6afedai DISPLAY_PORT_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+	};
+
 	reg_tp_3p3: touchpad-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "tp_3p3";
@@ -209,9 +317,22 @@
 		AVDD-supply = <&vreg_l15a_1p8>;
 		MICVDD-supply = <&reg_codec_3p3>;
 		VBAT-supply = <&reg_codec_3p3>;
+		DBVDD-supply = <&vreg_l15a_1p8>;
+		LDO1-IN-supply = <&vreg_l15a_1p8>;
+
+		/*
+		 * NOTE: The board has a path from this codec to the
+		 * DMIC microphones in the lid, however some of the option
+		 * resistors are absent and the microphones are connected
+		 * to the SoC instead.
+		 *
+		 * If the resistors were to be changed by the user to
+		 * connect the codec, the following could be used:
+		 *
+		 * realtek,dmic1-data-pin = <1>;
+		 * realtek,dmic1-clk-pin = <1>;
+		 */
 
-		realtek,dmic1-data-pin = <1>;
-		realtek,dmic1-clk-pin = <1>;
 		realtek,jd-src = <1>;
 	};
 };
@@ -351,6 +472,49 @@
 	status = "disabled";
 };
 
+&pm6150_rtc {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+
+	dai@17 {
+		reg = <PRIMARY_MI2S_TX>;
+		qcom,sd-lines = <0>;
+	};
+
+	dai@20 {
+		reg = <TERTIARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+
+	dai@104 {
+		reg = <DISPLAY_PORT_RX>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -359,6 +523,12 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	memory-region = <&adsp_mem>;
+	firmware-name = "qcom/sc7180/acer/aspire1/qcadsp7180.mbn";
+	status = "okay";
+};
+
 &remoteproc_mpss {
 	firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index 0be62331f982..067813f5f437 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -141,7 +141,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &panel {
-	compatible = "kingdisplay,kd116n21-30nv-a010";
+	compatible = "edp-panel";
 };
 
 &pen_insert {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 11f353d416b4..4dcaa15caef2 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2966,8 +2966,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 9 IRQ_TYPE_LEVEL_HIGH>;
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3100,8 +3100,12 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem";
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x800 0x2>;
 
@@ -3576,7 +3580,7 @@
 			compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index 5d462ae14ba1..c4d00a81da39 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -17,6 +17,9 @@
  * required by the setup for Chrome boards.
  */
 
+/delete-node/ &cdsp_mem;
+/delete-node/ &gpu_zap_mem;
+/delete-node/ &gpu_zap_shader;
 /delete-node/ &hyp_mem;
 /delete-node/ &xbl_mem;
 /delete-node/ &reserved_xbl_uefi_log;
@@ -24,11 +27,6 @@
 
 / {
 	reserved-memory {
-		adsp_mem: memory@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
-		};
-
 		camera_mem: memory@8ad00000 {
 			reg = <0x0 0x8ad00000 0x0 0x500000>;
 			no-map;
@@ -38,11 +36,6 @@
 			reg = <0x0 0x8b200000 0x0 0x500000>;
 			no-map;
 		};
-
-		wpss_mem: memory@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
 	};
 };
 
@@ -94,9 +87,31 @@
 	};
 };
 
+/* Currently not used */
+&remoteproc_cdsp {
+	/delete-property/ memory-region;
+};
+
 &remoteproc_wpss {
-	status = "okay";
+	compatible = "qcom,sc7280-wpss-pil";
+	clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+		 <&gcc GCC_WPSS_AHB_CLK>,
+		 <&gcc GCC_WPSS_RSCP_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "ahb_bdg",
+		      "ahb",
+		      "rscp",
+		      "xo";
+
+	resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+		 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+	reset-names = "restart", "pdc_sync";
+
+	qcom,halt-regs = <&tcsr_1 0x17000>;
+
 	firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
+
+	status = "okay";
 };
 
 &scm {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
index 95505549adcc..b721a8546800 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
@@ -8,11 +8,6 @@
 
 / {
 	reserved-memory {
-		mpss_mem: memory@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
 		mba_mem: memory@9c700000 {
 			reg = <0x0 0x9c700000 0x0 0x200000>;
 			no-map;
@@ -33,6 +28,8 @@
 
 &remoteproc_mpss {
 	compatible = "qcom,sc7280-mss-pil";
+	reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
+	reg-names = "qdsp6", "rmb";
 
 	clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
 		 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
index 2febd6126d4c..3ebc915f0dc2 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
@@ -7,5 +7,6 @@
 
 /* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */
 
+/delete-node/ &mpss_mem;
 /delete-node/ &remoteproc_mpss;
 /delete-node/ &rmtfs_mem;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 2ff549f4dc7a..a0059527d9e4 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -499,6 +499,25 @@
 	status = "okay";
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p9>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p8>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 66f1eb83cca7..83b5b76ba179 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -91,68 +92,93 @@
 		#size-cells = <2>;
 		ranges;
 
-		wlan_ce_mem: memory@4cd000 {
+		wlan_ce_mem: wlan-ce@4cd000 {
 			no-map;
 			reg = <0x0 0x004cd000 0x0 0x1000>;
 		};
 
-		hyp_mem: memory@80000000 {
+		hyp_mem: hyp@80000000 {
 			reg = <0x0 0x80000000 0x0 0x600000>;
 			no-map;
 		};
 
-		xbl_mem: memory@80600000 {
+		xbl_mem: xbl@80600000 {
 			reg = <0x0 0x80600000 0x0 0x200000>;
 			no-map;
 		};
 
-		aop_mem: memory@80800000 {
+		aop_mem: aop@80800000 {
 			reg = <0x0 0x80800000 0x0 0x60000>;
 			no-map;
 		};
 
-		aop_cmd_db_mem: memory@80860000 {
+		aop_cmd_db_mem: aop-cmd-db@80860000 {
 			reg = <0x0 0x80860000 0x0 0x20000>;
 			compatible = "qcom,cmd-db";
 			no-map;
 		};
 
-		reserved_xbl_uefi_log: memory@80880000 {
+		reserved_xbl_uefi_log: xbl-uefi-res@80880000 {
 			reg = <0x0 0x80884000 0x0 0x10000>;
 			no-map;
 		};
 
-		sec_apps_mem: memory@808ff000 {
+		sec_apps_mem: sec-apps@808ff000 {
 			reg = <0x0 0x808ff000 0x0 0x1000>;
 			no-map;
 		};
 
-		smem_mem: memory@80900000 {
+		smem_mem: smem@80900000 {
 			reg = <0x0 0x80900000 0x0 0x200000>;
 			no-map;
 		};
 
-		cpucp_mem: memory@80b00000 {
+		cpucp_mem: cpucp@80b00000 {
 			no-map;
 			reg = <0x0 0x80b00000 0x0 0x100000>;
 		};
 
-		wlan_fw_mem: memory@80c00000 {
+		wlan_fw_mem: wlan-fw@80c00000 {
 			reg = <0x0 0x80c00000 0x0 0xc00000>;
 			no-map;
 		};
 
-		video_mem: memory@8b200000 {
+		adsp_mem: adsp@86700000 {
+			reg = <0x0 0x86700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		video_mem: video@8b200000 {
 			reg = <0x0 0x8b200000 0x0 0x500000>;
 			no-map;
 		};
 
-		ipa_fw_mem: memory@8b700000 {
+		cdsp_mem: cdsp@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b700000 {
 			reg = <0 0x8b700000 0 0x10000>;
 			no-map;
 		};
 
-		rmtfs_mem: memory@9c900000 {
+		gpu_zap_mem: zap@8b71a000 {
+			reg = <0 0x8b71a000 0 0x2000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@9ae00000 {
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@9c900000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0x9c900000 0x0 0x280000>;
 			no-map;
@@ -906,7 +932,7 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
 				 <0>, <&pcie1_phy>,
-				 <0>, <0>, <0>,
+				 <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
 				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
@@ -974,6 +1000,7 @@
 
 			bus-width = <8>;
 			supports-cqe;
+			dma-coherent;
 
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
@@ -2034,6 +2061,11 @@
 			};
 		};
 
+		rng: rng@10d3000 {
+			compatible = "qcom,sc7280-trng", "qcom,trng";
+			reg = <0 0x010d3000 0 0x1000>;
+		};
+
 		cnoc2: interconnect@1500000 {
 			reg = <0 0x01500000 0 0x1000>;
 			compatible = "qcom,sc7280-cnoc2";
@@ -2126,7 +2158,7 @@
 			qcom,smem-state-names = "wlan-smp2p-out";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sc7280";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2233,6 +2265,99 @@
 			status = "disabled";
 		};
 
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sc7280-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x80 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sc7280-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_1_CLKREF_EN>;
+			clock-names = "ref", "ref_aux", "qref";
+
+			power-domains = <&rpmhpd SC7280_MX>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			iommus = <&apps_smmu 0x4e4 0x0011>,
+				 <&apps_smmu 0x4e6 0x0011>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sc7280-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x4e4 0x0011>,
+				 <&apps_smmu 0x4e4 0x0011>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "memory";
+		};
+
 		ipa: ipa@1e40000 {
 			compatible = "qcom,sc7280-ipa";
 
@@ -2598,7 +2723,8 @@
 				    "cx_mem",
 				    "cx_dbgc";
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-			iommus = <&adreno_smmu 0 0x401>;
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
 			operating-points-v2 = <&gpu_opp_table>;
 			qcom,gmu = <&gmu>;
 			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
@@ -2608,6 +2734,10 @@
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
 
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_zap_mem>;
+			};
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -2615,14 +2745,14 @@
 					opp-hz = /bits/ 64 <315000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 					opp-peak-kBps = <1804000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-450000000 {
 					opp-hz = /bits/ 64 <450000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 					opp-peak-kBps = <4068000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x07>;
 				};
 
 				/* Only applicable for SKUs which has 550Mhz as Fmax */
@@ -2637,28 +2767,28 @@
 					opp-hz = /bits/ 64 <550000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 					opp-peak-kBps = <6832000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-608000000 {
 					opp-hz = /bits/ 64 <608000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
 					opp-peak-kBps = <8368000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-700000000 {
 					opp-hz = /bits/ 64 <700000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-812000000 {
 					opp-hz = /bits/ 64 <812000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-840000000 {
@@ -2772,12 +2902,12 @@
 					"gpu_cc_hub_aon_clk";
 
 			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
 		};
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sc7280-mpss-pas";
-			reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
-			reg-names = "qdsp6", "rmb";
+			reg = <0 0x04080000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -3329,6 +3459,7 @@
 			operating-points-v2 = <&sdhc2_opp_table>;
 
 			bus-width = <4>;
+			dma-coherent;
 
 			qcom,dll-config = <0x0007642c>;
 
@@ -3399,6 +3530,32 @@
 
 			#clock-cells = <1>;
 			#phy-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		usb_2: usb@8cf8800 {
@@ -3426,8 +3583,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 12 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 13 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -3479,8 +3636,77 @@
 			status = "disabled";
 		};
 
+		remoteproc_adsp: remoteproc@3700000 {
+			compatible = "qcom,sc7280-adsp-pas";
+			reg = <0 0x03700000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_LCX>,
+					<&rpmhpd SC7280_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		remoteproc_wpss: remoteproc@8a00000 {
-			compatible = "qcom,sc7280-wpss-pil";
+			compatible = "qcom,sc7280-wpss-pas";
 			reg = <0 0x08a00000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
@@ -3492,12 +3718,8 @@
 			interrupt-names = "wdog", "fatal", "ready", "handover",
 					  "stop-ack", "shutdown-ack";
 
-			clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
-				 <&gcc GCC_WPSS_AHB_CLK>,
-				 <&gcc GCC_WPSS_RSCP_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ahb_bdg", "ahb",
-				      "rscp", "xo";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
 
 			power-domains = <&rpmhpd SC7280_CX>,
 					<&rpmhpd SC7280_MX>;
@@ -3510,11 +3732,6 @@
 			qcom,smem-states = <&wpss_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
-			resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
-				 <&pdc_reset PDC_WPSS_SYNC_RESET>;
-			reset-names = "restart", "pdc_sync";
-
-			qcom,halt-regs = <&tcsr_1 0x17000>;
 
 			status = "disabled";
 
@@ -3656,6 +3873,144 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		remoteproc_cdsp: remoteproc@a300000 {
+			compatible = "qcom,sc7280-cdsp-pas";
+			reg = <0 0x0a300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_CX>,
+					<&rpmhpd SC7280_MX>;
+			power-domain-names = "cx", "mx";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x11a1 0x0420>,
+							 <&apps_smmu 0x1181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x11a2 0x0420>,
+							 <&apps_smmu 0x1182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x11a3 0x0420>,
+							 <&apps_smmu 0x1183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x11a4 0x0420>,
+							 <&apps_smmu 0x1184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x11a5 0x0420>,
+							 <&apps_smmu 0x1185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x11a6 0x0420>,
+							 <&apps_smmu 0x1186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x11a7 0x0420>,
+							 <&apps_smmu 0x1187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x11a8 0x0420>,
+							 <&apps_smmu 0x1188 0x0420>;
+					};
+
+					/* note: secure cb9 in downstream */
+
+					compute-cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <11>;
+						iommus = <&apps_smmu 0x11ab 0x0420>,
+							 <&apps_smmu 0x118b 0x0420>;
+					};
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&apps_smmu 0x11ac 0x0420>,
+							 <&apps_smmu 0x118c 0x0420>;
+					};
+
+					compute-cb@13 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+						iommus = <&apps_smmu 0x11ad 0x0420>,
+							 <&apps_smmu 0x118d 0x0420>;
+					};
+
+					compute-cb@14 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <14>;
+						iommus = <&apps_smmu 0x11ae 0x0420>,
+							 <&apps_smmu 0x118e 0x0420>;
+					};
+				};
+			};
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -3681,9 +4036,9 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 17 IRQ_TYPE_EDGE_BOTH>;
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -3793,6 +4148,86 @@
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac4a000 {
+			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4a000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac4b000 {
+			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4b000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci2_default &cci3_default>;
+			pinctrl-1 = <&cci2_sleep &cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc7280-camcc";
 			reg = <0 0x0ad00000 0 0x10000>;
@@ -3847,8 +4282,12 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem";
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc2 SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x900 0x402>;
 
@@ -4298,6 +4737,62 @@
 			gpio-ranges = <&tlmm 0 0 175>;
 			wakeup-parent = <&pdc>;
 
+			cci0_default: cci0-default-state {
+				pins = "gpio69", "gpio70";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				pins = "gpio69", "gpio70";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio71", "gpio72";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				pins = "gpio71", "gpio72";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				pins = "gpio73", "gpio74";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				pins = "gpio73", "gpio74";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_default: cci3-default-state {
+				pins = "gpio75", "gpio76";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				pins = "gpio75", "gpio76";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			dp_hot_plug_det: dp-hot-plug-det-state {
 				pins = "gpio47";
 				function = "dp_hot";
@@ -5222,7 +5717,7 @@
 			compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 			status = "reserved"; /* Owned by Gunyah hyp */
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
index 3ea07d094b60..0c22f3efec20 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -452,8 +452,8 @@
 };
 
 &pcie3 {
-	perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 180 GPIO_ACTIVE_HIGH>;
 	pinctrl-0 = <&pcie3_default_state>;
 	pinctrl-names = "default";
 
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
index fd2fab4895b3..bfee60c93ccc 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -43,7 +43,7 @@
 		pinctrl-0 = <&hall_int_active_state>;
 
 		lid-switch {
-			gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+			gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_LID>;
 			wakeup-source;
@@ -386,12 +386,18 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10e_2p9: ldo10 {
 			regulator-min-microvolt = <2904000>;
 			regulator-max-microvolt = <2904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l12e: ldo12 {
@@ -531,8 +537,8 @@
 };
 
 &pcie1 {
-	perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 177 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2_default_state>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index a34f438ef2d9..0430d99091e3 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8180x.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -1684,7 +1685,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1736,7 +1737,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1d80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
 
@@ -1751,6 +1751,7 @@
 
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -1761,7 +1762,7 @@
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
 				 <&gcc GCC_PCIE_0_PIPE_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
@@ -1781,7 +1782,7 @@
 			status = "disabled";
 		};
 
-		pcie3: pci@1c08000 {
+		pcie3: pcie@1c08000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1833,7 +1834,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1e00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
 				    <0x100 &apps_smmu 0x1e01 0x1>;
 
@@ -1848,6 +1848,7 @@
 
 			phys = <&pcie3_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -1858,7 +1859,7 @@
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_3_CLKREF_CLK>,
-				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE3_PHY_REFGEN_CLK>,
 				 <&gcc GCC_PCIE_3_PIPE_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
@@ -1879,7 +1880,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c10000 {
+		pcie1: pcie@1c10000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c10000 0 0x3000>,
 			      <0 0x68000000 0 0xf1d>,
@@ -1931,7 +1932,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1c80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
 				    <0x100 &apps_smmu 0x1c81 0x1>;
 
@@ -1946,6 +1946,7 @@
 
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -1977,7 +1978,7 @@
 			status = "disabled";
 		};
 
-		pcie2: pci@1c18000 {
+		pcie2: pcie@1c18000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c18000 0 0x3000>,
 			      <0 0x70000000 0 0xf1d>,
@@ -2029,7 +2030,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1d00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1d00 0x1>,
 				    <0x100 &apps_smmu 0x1d01 0x1>;
 
@@ -2044,6 +2044,7 @@
 
 			phys = <&pcie2_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -2062,7 +2063,7 @@
 				      "refgen",
 				      "pipe";
 			#clock-cells = <0>;
-			clock-output-names = "pcie_3_pipe_clk";
+			clock-output-names = "pcie_2_pipe_clk";
 
 			#phy-cells = <0>;
 
@@ -2114,6 +2115,14 @@
 					<0 0>,
 					<0 0>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_0_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
 			status = "disabled";
 		};
 
@@ -2548,10 +2557,10 @@
 		usb_prim: usb@a6f8800 {
 			compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
@@ -2622,10 +2631,10 @@
 				      "xo";
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 			power-domains = <&gcc USB30_SEC_GDSC>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -2704,11 +2713,15 @@
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
 					 <&gcc GCC_DISP_HF_AXI_CLK>,
 					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
-					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>;
 				clock-names = "iface",
 					      "bus",
 					      "core",
-					      "vsync";
+					      "vsync",
+					      "rot",
+					      "lut";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
 						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
@@ -3117,8 +3130,6 @@
 				phys = <&edp_phy>;
 				phy-names = "dp";
 
-				#sound-dai-cells = <0>;
-
 				operating-points-v2 = <&edp_opp_table>;
 				power-domains = <&rpmhpd SC8180X_MMCX>;
 
@@ -3418,10 +3429,12 @@
 			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x20000>;
 		};
 
 		apss_shared: mailbox@17c00000 {
-			compatible = "qcom,sc8180x-apss-shared";
+			compatible = "qcom,sc8180x-apss-shared", "qcom,sdm845-apss-shared";
 			reg = <0x0 0x17c00000 0x0 0x1000>;
 			#mbox-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index e4861c61a65b..41215567b3ae 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -458,6 +458,8 @@
 };
 
 &mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
+
 	vdda-phy-supply = <&vreg_l6b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
@@ -561,6 +563,8 @@
 };
 
 &pcie4 {
+	max-link-speed = <2>;
+
 	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 38edaf51aa34..eb657e544961 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -82,6 +82,9 @@
 	leds {
 		compatible = "gpio-leds";
 
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_indicator_en>;
+
 		led-camera-indicator {
 			label = "white:camera-indicator";
 			function = LED_FUNCTION_INDICATOR;
@@ -570,6 +573,7 @@
 
 &mdss0_dp3 {
 	compatible = "qcom,sc8280xp-edp";
+	/delete-property/ #sound-dai-cells;
 
 	data-lanes = <0 1 2 3>;
 
@@ -601,6 +605,7 @@
 };
 
 &mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
 	vdda-phy-supply = <&vreg_l6b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
@@ -717,6 +722,8 @@
 };
 
 &pcie4 {
+	max-link-speed = <2>;
+
 	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 
@@ -1277,6 +1284,13 @@
 		};
 	};
 
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio28";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	edp_reg_en: edp-reg-en-state {
 		pins = "gpio25";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index cad59af7ccef..febf28356ff8 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
 #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8280xp.h>
@@ -2731,7 +2732,7 @@
 			status = "disabled";
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			compatible = "qcom,soundwire-v1.6.0";
 			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2807,7 +2808,7 @@
 			status = "disabled";
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			reg = <0 0x03250000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.6.0";
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2844,7 +2845,7 @@
 			#reset-cells = <1>;
 		};
 
-		swr2: soundwire-controller@3330000 {
+		swr2: soundwire@3330000 {
 			compatible = "qcom,soundwire-v1.6.0";
 			reg = <0 0x03330000 0 0x2000>;
 			interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>,
@@ -3450,6 +3451,20 @@
 			};
 		};
 
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sc8280xp-camcc";
+			reg = <0 0x0ad00000 0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss0: display-subsystem@ae00000 {
 			compatible = "qcom,sc8280xp-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -4030,6 +4045,7 @@
 		sram@c3f0000 {
 			compatible = "qcom,rpmh-stats";
 			reg = <0 0x0c3f0000 0 0x400>;
+			qcom,qmp = <&aoss_qmp>;
 		};
 
 		spmi_bus: spmi@c440000 {
@@ -4225,7 +4241,7 @@
 			compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 775700f78e0f..513fe5e76b68 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -606,9 +606,6 @@
 			compatible = "qcom,sdm660-bimc";
 			reg = <0x01008000 0x78000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		restart@10ac000 {
@@ -620,28 +617,17 @@
 			compatible = "qcom,sdm660-cnoc";
 			reg = <0x01500000 0x10000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		snoc: interconnect@1626000 {
 			compatible = "qcom,sdm660-snoc";
 			reg = <0x01626000 0x7090>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		anoc2_smmu: iommu@16c0000 {
 			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
 			reg = <0x016c0000 0x40000>;
-
-			assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			assigned-clock-rates = <1000>;
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "bus";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -686,16 +672,12 @@
 			compatible = "qcom,sdm660-a2noc";
 			reg = <0x01704000 0xc100>;
 			#interconnect-cells = <1>;
-			clock-names = "bus",
-				      "bus_a",
-				      "ipa",
+			clock-names = "ipa",
 				      "ufs_axi",
 				      "aggre2_ufs_axi",
 				      "aggre2_usb3_axi",
 				      "cfg_noc_usb2_axi";
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-				 <&rpmcc RPM_SMD_IPA_CLK>,
+			clocks = <&rpmcc RPM_SMD_IPA_CLK>,
 				 <&gcc GCC_UFS_AXI_CLK>,
 				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
@@ -706,10 +688,8 @@
 			compatible = "qcom,sdm660-mnoc";
 			reg = <0x01745000 0xa010>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "iface";
-			clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
-				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
-				 <&mmcc AHB_CLK_SRC>;
+			clock-names = "iface";
+			clocks = <&mmcc AHB_CLK_SRC>;
 		};
 
 		tsens: thermal-sensor@10ae000 {
@@ -1186,7 +1166,9 @@
 			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
 				 <&gcc GCC_BIMC_GFX_CLK>,
 				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
-			clock-names = "iface", "mem", "mem_iface";
+			clock-names = "iface",
+			              "mem",
+				      "mem_iface";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -1288,20 +1270,16 @@
 				 <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_SLEEP_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
 			clock-names = "cfg_noc",
 				      "core",
 				      "iface",
 				      "sleep",
-				      "mock_utmi",
-				      "bus";
+				      "mock_utmi";
 
 			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_MASTER_CLK>,
-					  <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			assigned-clock-rates = <19200000>, <120000000>,
-					       <19200000>;
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
 
 			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
@@ -2204,10 +2182,9 @@
 
 			clocks = <&mmcc MNOC_AHB_CLK>,
 				 <&mmcc BIMC_SMMU_AHB_CLK>,
-				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
 				 <&mmcc BIMC_SMMU_AXI_CLK>;
 			clock-names = "iface-mm", "iface-smmu",
-				      "bus-mm", "bus-smmu";
+				      "bus-smmu";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -2324,12 +2301,6 @@
 			compatible = "qcom,sdm660-gnoc";
 			reg = <0x17900000 0xe000>;
 			#interconnect-cells = <1>;
-			/*
-			 * This one apparently features no clocks,
-			 * so let's not mess with the driver needlessly
-			 */
-			clock-names = "bus", "bus_a";
-			clocks = <&xo_board>, <&xo_board>;
 		};
 
 		apcs_glb: mailbox@17911000 {
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 301eca9a4f31..057579ae3013 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -80,6 +80,10 @@
 	};
 };
 
+&lpass {
+	status = "okay";
+};
+
 &pm8953_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -239,3 +243,18 @@
 &usb3_dwc3 {
 	dr_mode = "peripheral";
 };
+
+&wcnss {
+	status = "okay";
+
+	vddpx-supply = <&pm8953_l5>;
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3680";
+
+	vddxo-supply = <&pm8953_l7>;
+	vddrfa-supply = <&pm8953_l19>;
+	vddpa-supply = <&pm8953_l9>;
+	vdddig-supply = <&pm8953_l5>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
index ba2043d67370..4d7b77a23159 100644
--- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -6,6 +6,7 @@
  * Copyright (c) 2022, Richard Acayan. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -400,6 +401,30 @@
 		};
 	};
 
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-180000000 {
+			opp-hz = /bits/ 64 <180000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -1295,10 +1320,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -1353,6 +1378,273 @@
 			#interrupt-cells = <4>;
 		};
 
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sdm670-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x880 0x8>,
+				 <&apps_smmu 0xc80 0x8>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sdm670-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-430000000 {
+						opp-hz = /bits/ 64 <430000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96a00 0 0x10e>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sdm845-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_link_clk_divsel_ten",
+				      "dp_vco_divided_clk_src_mux";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x80000>;
@@ -1532,7 +1824,7 @@
 		};
 
 		cpufreq_hw: cpufreq@17d43000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sdm670-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
 			reg-names = "freq-domain0", "freq-domain1";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index c7eba6c491be..ab6220456513 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -67,8 +67,8 @@
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
 			default-state = "off";
+			panic-indicator;
 		};
 
 		led-1 {
@@ -1130,7 +1130,7 @@
 	vdd-rx-supply = <&vreg_s4a_1p8>;
 	vdd-io-supply = <&vreg_s4a_1p8>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,1 {
 			compatible = "sdw10217201000";
 			reg = <0 1>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index b523b5fff702..e821103d49c0 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
@@ -484,6 +485,28 @@
 	status = "okay";
 };
 
+&pmi8998_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &q6afedai {
 	qi2s@22 {
 		reg = <22>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
index c15d48860646..6172cd1539e6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
@@ -54,7 +54,7 @@
 				reg = <0x42 0x2>;
 			};
 
-			swm: swm@c85 {
+			swm: soundwire@c85 {
 				compatible = "qcom,soundwire-v1.3.0";
 				reg = <0xc85 0x40>;
 				interrupts-extended = <&wcd9340 20>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 93b1582e807d..617b17b2d7d9 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -355,6 +355,28 @@
 	status = "okay";
 };
 
+&pmi8998_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &pm8998_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index bf5e6eb9d313..c2244824355a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2306,7 +2306,7 @@
 			};
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c00000 0 0x2000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -2405,7 +2405,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c08000 0 0x2000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2565,7 +2565,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_PHY_GDSC>;
@@ -2595,30 +2595,50 @@
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
 				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
-			freq-table-hz =
-				<50000000 200000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 150000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>;
+
+			operating-points-v2 = <&ufs_opp_table>;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sdm845-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x18c>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
@@ -2626,16 +2646,9 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -3545,11 +3558,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					etf_in: endpoint {
 						remote-endpoint =
 						  <&merge_funnel_out>;
@@ -4000,33 +4010,28 @@
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x18c>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x128>,
-				      <0 0x088eb400 0 0x1fc>,
-				      <0 0x088eb800 0 0x218>,
-				      <0 0x088eb600 0 0x70>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		usb_1: usb@a6f8800 {
@@ -4053,10 +4058,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -4104,10 +4109,10 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -4126,7 +4131,7 @@
 				iommus = <&apps_smmu 0x760 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -5088,7 +5093,7 @@
 			compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
 			reg = <0 0x17980000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		apss_shared: mailbox@17990000 {
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 92a812b5f423..47dc42f6e936 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -392,6 +392,8 @@
 		hid-descr-addr = <0x20>;
 
 		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
+
+		wakeup-source;
 	};
 };
 
@@ -408,6 +410,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_hid_active>;
+
+		wakeup-source;
 	};
 };
 
@@ -482,6 +486,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c11_hid_active>;
+
+		wakeup-source;
 	};
 };
 
@@ -797,7 +803,7 @@
 	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
index 543837316001..26217836c270 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -658,7 +658,7 @@
 	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index a14e0650c4a8..f76e72fb2072 100644
--- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -250,6 +250,11 @@
 	stdout-path = "serial0:115200n8";
 };
 
+&pm7550ba_eusb2_repeater {
+	vdd18-supply = <&vreg_l5b_1p776>;
+	vdd3-supply = <&vreg_l10b_3p08>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -261,3 +266,27 @@
 &uart1 {
 	status = "okay";
 };
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4b_0p88>;
+	vdda12-supply = <&vreg_l1b_1p2>;
+
+	phys = <&pm7550ba_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4b_0p88>;
+	vdda-pll-supply = <&vreg_l1b_1p2>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
index e180aa4023ec..7dbdf8ca6de6 100644
--- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -8,6 +8,8 @@
 
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sdx75-gcc.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sdx75.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -203,6 +205,19 @@
 		};
 	};
 
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sdx75-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+		clocks = <&rpmhcc RPMH_QPIC_CLK>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sdx75-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x0>;
@@ -434,6 +449,9 @@
 			clock-names = "m-ahb",
 				      "s-ahb";
 			iommus = <&apps_smmu 0xe3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -444,6 +462,12 @@
 				reg = <0x0 0x00984000 0x0 0x4000>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-0 = <&qupv3_se1_2uart_active>;
 				pinctrl-1 = <&qupv3_se1_2uart_sleep>;
@@ -453,12 +477,144 @@
 			};
 		};
 
+		usb_hsphy: phy@ff4000 {
+			compatible = "qcom,sdx75-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy";
+			reg = <0x0 0x00ff4000 0x0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@ff6000 {
+			compatible = "qcom,sdx75-qmp-usb3-uni-phy";
+			reg = <0x0 0x00ff6000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB2_CLKREF_EN>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			power-domains = <&gcc GCC_USB3_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		system_noc: interconnect@1640000 {
+			compatible = "qcom,sdx75-system-noc";
+			reg = <0x0 0x01640000 0x0 0x4b400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_anoc: interconnect@16c0000 {
+			compatible = "qcom,sdx75-pcie-anoc";
+			reg = <0x0 0x016c0000 0x0 0x14200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
 			#hwlock-cells = <1>;
 		};
 
+		usb: usb@a6f8800 {
+			compatible = "qcom,sdx75-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 10 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_GDSC>;
+
+			resets = <&gcc GCC_USB30_BCR>;
+
+			interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &system_noc SLAVE_USB3 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			status = "disabled";
+
+			usb_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x80 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_hsphy>,
+				       <&usb_qmpphy>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sdx75-pdc", "qcom,pdc";
 			reg = <0x0 0xb220000 0x0 0x30000>,
@@ -733,6 +889,20 @@
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
 		};
+
+		dc_noc: interconnect@190e0000 {
+			compatible = "qcom,sdx75-dc-noc";
+			reg = <0x0 0x190e0000 0x0 0x8200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			compatible = "qcom,sdx75-gem-noc";
+			reg = <0x0 0x19100000 0x0 0x34080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
index 00a1c81ca397..866e93783590 100644
--- a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
@@ -10,9 +10,23 @@
 	model = "Qualcomm Technologies, Inc. SM4450 QRD";
 	compatible = "qcom,sm4450-qrd", "qcom,sm4450";
 
-	aliases { };
+	aliases {
+		serial0 = &uart7;
+	};
 
 	chosen {
-		bootargs = "console=hvc0";
+		stdout-path = "serial0:115200n8";
 	};
 };
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>; /* NFC eSE SPI */
+};
+
+&uart7 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
index c4e5b33f5169..3e7ae3bebbe0 100644
--- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
@@ -3,8 +3,11 @@
  * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm4450-gcc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -328,6 +331,18 @@
 		};
 	};
 
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aop_cmd_db_mem: cmd-db@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -335,6 +350,43 @@
 		dma-ranges = <0 0 0 0 0x10 0>;
 		compatible = "simple-bus";
 
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm4450-gcc";
+			reg = <0x0 0x00100000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+		};
+
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			uart7: serial@a88000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -351,6 +403,32 @@
 			interrupt-controller;
 		};
 
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm4450-tlmm";
+			reg = <0x0 0x0f100000 0x0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 137>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio23";
+				function = "qup1_se2_l2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio22";
+				function = "qup1_se2_l2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		intc: interrupt-controller@17200000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0x17200000 0x0 0x10000>,     /* GICD */
@@ -419,6 +497,35 @@
 				status = "disabled";
 			};
 		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			label = "apps_rsc";
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm4450-rpmh-clk";
+				#clock-cells = <1>;
+				clocks = <&xo_board>;
+				clock-names = "xo";
+			};
+		};
+
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 839c60351240..f9849b8befbf 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -10,6 +10,8 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
+#include <dt-bindings/interconnect/qcom,sm6115.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 
@@ -264,6 +266,8 @@
 		scm: scm {
 			compatible = "qcom,scm-sm6115", "qcom,scm";
 			#reset-cells = <1>;
+			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
 		};
 	};
 
@@ -273,6 +277,25 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -859,6 +882,43 @@
 			status = "disabled";
 		};
 
+		system_noc: interconnect@1880000 {
+			compatible = "qcom,sm6115-snoc";
+			reg = <0x0 0x01880000 0x0 0x5f080>;
+			clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&rpmcc RPM_SMD_IPA_CLK>;
+			clock-names = "cpu_axi",
+				      "ufs_axi",
+				      "usb_axi",
+				      "ipa";
+			#interconnect-cells = <2>;
+
+			clk_virt: interconnect-clk {
+				compatible = "qcom,sm6115-clk-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmrt_virt: interconnect-mmrt {
+				compatible = "qcom,sm6115-mmrt-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmnrt_virt: interconnect-mmnrt {
+				compatible = "qcom,sm6115-mmnrt-virt";
+				#interconnect-cells = <2>;
+			};
+		};
+
+		config_noc: interconnect@1900000 {
+			compatible = "qcom,sm6115-cnoc";
+			reg = <0x0 0x01900000 0x0 0x6200>;
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>;
+			clock-names = "usb_axi";
+			#interconnect-cells = <2>;
+		};
+
 		qfprom@1b40000 {
 			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b40000 0x0 0x7000>;
@@ -883,6 +943,60 @@
 			clock-names = "core";
 		};
 
+		pmu@1b8e300 {
+			compatible = "qcom,sm6115-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x01b8e300 0x0 0x600>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&bimc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ACTIVE_TAG>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <(1353 * 4 * 1000)>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+			};
+		};
+
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x01c40000 0x0 0x1100>,
@@ -912,6 +1026,12 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		bimc: interconnect@4480000 {
+			compatible = "qcom,sm6115-bimc";
+			reg = <0x0 0x04480000 0x0 0x80000>;
+			#interconnect-cells = <2>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x0 0x045f0000 0x0 0x7000>;
@@ -939,8 +1059,42 @@
 				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
 			clock-names = "iface", "core", "xo", "ice";
 
+			power-domains = <&rpmpd SM6115_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
 			bus-width = <8>;
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <102400 65000>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+			};
 		};
 
 		sdhc_2: mmc@4784000 {
@@ -961,6 +1115,12 @@
 			operating-points-v2 = <&sdhc2_opp_table>;
 			iommus = <&apps_smmu 0x00a0 0x0>;
 			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			bus-width = <4>;
 			qcom,dll-config = <0x0007642c>;
@@ -973,11 +1133,15 @@
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <261438 150000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmpd_opp_nom>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -987,7 +1151,7 @@
 			reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <1>;
 			#reset-cells = <1>;
@@ -1028,24 +1192,17 @@
 
 		ufs_mem_phy: phy@4807000 {
 			compatible = "qcom,sm6115-qmp-ufs-phy";
-			reg = <0x0 0x04807000 0x0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x04807000 0x0 0x1000>;
 
 			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 			clock-names = "ref", "ref_aux";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@4807400 {
-				reg = <0x0 0x04807400 0x0 0x098>,
-				      <0x0 0x04807600 0x0 0x130>,
-				      <0x0 0x04807c00 0x0 0x16c>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		gpi_dma0: dma-controller@4a00000 {
@@ -1091,6 +1248,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1107,6 +1273,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1123,6 +1298,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1139,6 +1323,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1155,6 +1348,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1171,6 +1373,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1187,6 +1398,15 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1203,11 +1423,37 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};
 
+			uart3: serial@4a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				power-domains = <&rpmpd SM6115_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				status = "disabled";
+			};
+
 			i2c4: i2c@4a90000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a90000 0x0 0x4000>;
@@ -1219,6 +1465,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1235,6 +1490,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1246,6 +1510,12 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1260,6 +1530,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1276,6 +1555,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1307,6 +1595,14 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			 /* TODO: USB<->IPA path */
+			interconnects = <&system_noc MASTER_USB3 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
 
@@ -1478,6 +1774,13 @@
 			iommus = <&apps_smmu 0x420 0x2>,
 				 <&apps_smmu 0x421 0x0>;
 
+			interconnects = <&mmrt_virt MASTER_MDP_PORT0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -2566,54 +2869,54 @@
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0 0x0f120000 0x0 0x1000>;
 			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x0 0x0 0x20000000>;
 			clock-frequency = <19200000>;
 
 			frame@f121000 {
-				reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>;
+				reg = <0x0 0x0f121000 0x1000>, <0x0 0x0f122000 0x1000>;
 				frame-number = <0>;
 				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			frame@f123000 {
-				reg = <0x0 0x0f123000 0x0 0x1000>;
+				reg = <0x0 0x0f123000 0x1000>;
 				frame-number = <1>;
 				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f124000 {
-				reg = <0x0 0x0f124000 0x0 0x1000>;
+				reg = <0x0 0x0f124000 0x1000>;
 				frame-number = <2>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f125000 {
-				reg = <0x0 0x0f125000 0x0 0x1000>;
+				reg = <0x0 0x0f125000 0x1000>;
 				frame-number = <3>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f126000 {
-				reg = <0x0 0x0f126000 0x0 0x1000>;
+				reg = <0x0 0x0f126000 0x1000>;
 				frame-number = <4>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f127000 {
-				reg = <0x0 0x0f127000 0x0 0x1000>;
+				reg = <0x0 0x0f127000 0x1000>;
 				frame-number = <5>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f128000 {
-				reg = <0x0 0x0f128000 0x0 0x1000>;
+				reg = <0x0 0x0f128000 0x1000>;
 				frame-number = <6>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index eb07eca3a48d..1dd3a4056e26 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -1185,6 +1185,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <66666667>;
 
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 8fd6f4d03490..43cffe8e1247 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1142,7 +1142,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -1187,10 +1187,7 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm6350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x18c>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
 
 			clock-names = "ref",
 				      "ref_aux";
@@ -1200,16 +1197,9 @@
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
-			status = "disabled";
+			#phy-cells = <0>;
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x128>,
-				      <0 0x01d87600 0 0x1fc>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x128>,
-				      <0 0x01d87a00 0 0x1fc>;
-				#phy-cells = <0>;
-			};
+			status = "disabled";
 		};
 
 		ipa: ipa@1e40000 {
@@ -2524,7 +2514,7 @@
 			compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
index b2f1bb1d58e9..cca2c2eb88ad 100644
--- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
+++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -80,6 +80,15 @@
 		};
 	};
 
+	touch_avdd: touch-avdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_avdd";
+		gpio = <&tlmm 59 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_avdd_default>;
+		enable-active-high;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -136,9 +145,10 @@
 		interrupts = <22 0x2008>;
 
 		vdd-supply = <&pm6125_l13>;
+		avdd-supply = <&touch_avdd>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_default &ts_avdd_default>;
+		pinctrl-0 = <&ts_int_default>;
 	};
 };
 
@@ -187,6 +197,11 @@
 	status = "okay";
 };
 
+&remoteproc_mss {
+	firmware-name = "qcom/sm6375/Sony/murray/modem.mbn";
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -238,8 +253,8 @@
 		};
 
 		pm6125_l7: l7 {
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <1050000>;
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
 		};
 
 		pm6125_l8: l8 {
@@ -306,7 +321,7 @@
 
 		pm6125_l21: l21 {
 			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-max-microvolt = <3312000>;
 		};
 
 		pm6125_l22: l22 {
@@ -317,7 +332,7 @@
 
 		pm6125_l23: l23 {
 			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-max-microvolt = <3312000>;
 		};
 
 		pm6125_l24: l24 {
@@ -340,8 +355,8 @@
 		};
 
 		pmr735a_l2: l2 {
-			regulator-min-microvolt = <352000>;
-			regulator-max-microvolt = <796000>;
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <640000>;
 		};
 
 		pmr735a_l3: l3 {
@@ -412,7 +427,7 @@
 		pins = "gpio59";
 		function = "gpio";
 		drive-strength = <8>;
-		output-high;
+		output-low;
 	};
 };
 
@@ -425,6 +440,18 @@
 };
 
 &usb_1_hsphy {
+	vdda-pll-supply = <&pm6125_l7>;
+	vdda18-supply = <&pm6125_l10>;
+	vdda33-supply = <&pmr735a_l7>;
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pmr735a_l2>;
+	vdd-1.8-xo-supply = <&pm6125_l16>;
+	vdd-1.3-rfa-supply = <&pm6125_l2>;
+	vdd-3.3-ch0-supply = <&pm6125_l23>;
+	vdd-3.3-ch1-supply = <&pm6125_l21>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index e7ff55443da7..7ac8bf26dda3 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -311,6 +311,25 @@
 		};
 	};
 
+	mpm: interrupt-controller {
+		compatible = "qcom,mpm";
+		qcom,rpm-msg-ram = <&apss_mpm>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#power-domain-cells = <0>;
+		interrupt-parent = <&intc>;
+		qcom,mpm-pin-count = <96>;
+		qcom,mpm-pin-map = <5 296>,  /* Soundwire wake_irq */
+				   <12 422>, /* DWC3 ss_phy_irq */
+				   <86 183>, /* MPM wake, SPMI */
+				   <89 314>, /* TSENS0 0C */
+				   <90 315>, /* TSENS1 0C */
+				   <93 164>, /* DWC3 dm_hs_phy_irq */
+				   <94 165>; /* DWC3 dp_hs_phy_irq */
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -486,6 +505,7 @@
 
 		CLUSTER_PD: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
+			power-domains = <&mpm>;
 			domain-idle-states = <&CLUSTER_SLEEP_0>;
 		};
 	};
@@ -808,7 +828,7 @@
 			reg = <0 0x00500000 0 0x800000>;
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&tlmm 0 0 157>;
-			/* TODO: Hook up MPM as wakeup-parent when it's there */
+			wakeup-parent = <&mpm>;
 			interrupt-controller;
 			gpio-controller;
 			#interrupt-cells = <2>;
@@ -896,6 +916,36 @@
 				drive-strength = <6>;
 				bias-disable;
 			};
+
+			qup_uart1_default: qup-uart1-default-state {
+				cts-pins {
+					pins = "gpio61";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				rts-pins {
+					pins = "gpio62";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				tx-pins {
+					pins = "gpio63";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio64";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		gcc: clock-controller@1400000 {
@@ -930,7 +980,7 @@
 			      <0 0x01c0a000 0 0x26000>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
@@ -962,8 +1012,15 @@
 		};
 
 		rpm_msg_ram: sram@45f0000 {
-			compatible = "qcom,rpm-msg-ram";
+			compatible = "qcom,rpm-msg-ram", "mmio-sram";
 			reg = <0 0x045f0000 0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x045f0000 0x7000>;
+
+			apss_mpm: sram@1b8 {
+				reg = <0x1b8 0x48>;
+			};
 		};
 
 		sram@4690000 {
@@ -1111,6 +1168,19 @@
 				status = "disabled";
 			};
 
+			uart1: serial@4a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				pinctrl-0 = <&qup_uart1_default>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
 			i2c2: i2c@4a88000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a88000 0x0 0x4000>;
@@ -1360,10 +1430,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <133333333>;
 
-			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 93 IRQ_TYPE_EDGE_BOTH>,
+					      <&mpm 94 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index bb161b536da4..de670b407ef1 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm8150.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -54,6 +55,17 @@
 			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -127,8 +139,6 @@
 		vdda_sp_sensor:
 		vdda_ufs_2ln_core_1:
 		vdda_ufs_2ln_core_2:
-		vdda_usb_ss_dp_core_1:
-		vdda_usb_ss_dp_core_2:
 		vdda_qlink_lv:
 		vdda_qlink_lv_ck:
 		vreg_l5a_0p875: ldo5 {
@@ -210,6 +220,12 @@
 			regulator-max-microvolt = <3008000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_l18a_0p8: ldo18 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
 	};
 
 	regulators-1 {
@@ -359,15 +375,210 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
 &gpu {
-	/*
-	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
-	 * after display support is added on this board.
-	 */
-	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
 	status = "okay";
 };
 
+&i2c4 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		interrupts-extended = <&tlmm 152 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc-supply = <&vreg_bob>;
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pm8150b_typec_sbu_out>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lt9611_codec: hdmi-bridge@3b {
+		compatible = "lontium,lt9611";
+		reg = <0x3b>;
+		#sound-dai-cells = <1>;
+
+		interrupts-extended = <&tlmm 9 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s4a_1p8>;
+		vcc-supply = <&vreg_bob>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lt9611_b: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l3c_1p2>;
+
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l5a_0p875>;
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&vreg_l3c_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_b>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi1_phy {
+	vdds-supply = <&vreg_l5a_0p875>;
+	status = "okay";
+};
+
+&pm8150b_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <3000000>;
+	status = "okay";
+};
+
+&pm8150b_typec {
+	status = "okay";
+
+	vdd-pdphy-supply = <&vreg_l2a_3p1>;
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "source";
+		data-role = "dual";
+		self-powered;
+
+		source-pdos = <PDO_FIXED(5000, 3000,
+					 PDO_FIXED_DUAL_ROLE |
+					 PDO_FIXED_USB_COMM |
+					 PDO_FIXED_DATA_SWAP)>;
+
+		altmodes {
+			displayport {
+				svid = /bits/ 16 <0xff01>;
+				vdo = <0x00001c46>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pm8150b_role_switch_in: endpoint {
+					remote-endpoint = <&usb_1_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pm8150b_typec_mux_in: endpoint {
+					remote-endpoint = <&usb_1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				pm8150b_typec_sbu_out: endpoint {
+					remote-endpoint = <&fsa4480_sbu_mux>;
+				};
+			};
+		};
+	};
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -378,6 +589,10 @@
 	linux,code = <KEY_VOLUMEDOWN>;
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -402,6 +617,13 @@
 
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <126 4>;
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio9";
+		function = "gpio";
+		bias-disable;
+	};
+
 };
 
 &uart2 {
@@ -445,13 +667,26 @@
 &usb_1_qmpphy {
 	status = "okay";
 	vdda-phy-supply = <&vreg_l3c_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+	vdda-pll-supply = <&vreg_l18a_0p8>;
+	orientation-switch;
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pm8150b_typec_mux_in>;
+};
+
+&usb_1_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
 };
 
 &usb_2_qmpphy {
 	status = "okay";
 	vdda-phy-supply = <&vreg_l3c_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+	vdda-pll-supply = <&vreg_l5a_0p875>;
 };
 
 &usb_1 {
@@ -463,7 +698,16 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
 };
 
 &usb_2_dwc3 {
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 97623af13464..761a6757dc26 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1824,7 +1824,7 @@
 			      <0x0 0x010ad000 0x0 0x3000>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8150";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1878,7 +1878,7 @@
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
@@ -1915,7 +1915,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8150";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1972,7 +1972,7 @@
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
@@ -2016,7 +2016,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2061,10 +2061,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8150-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
@@ -2074,16 +2072,10 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x16c>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x16c>,
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -2957,11 +2949,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					replicator1_in: endpoint {
 						remote-endpoint = <&replicator_out1>;
 					};
@@ -3447,37 +3436,56 @@
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8150-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x200>,
-				      <0 0x088eb400 0 0x200>,
-				      <0 0x088eb800 0 0x800>,
-				      <0 0x088eb600 0 0x200>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		sdhc_2: mmc@8804000 {
@@ -3565,10 +3573,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3589,6 +3597,25 @@
 				snps,dis_enblslpm_quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
 			};
 		};
 
@@ -3618,10 +3645,10 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3640,7 +3667,7 @@
 				iommus = <&apps_smmu 0x160 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -3719,6 +3746,13 @@
 							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp_in>;
+						};
+					};
 				};
 
 				mdp_opp_table: opp-table {
@@ -3746,6 +3780,86 @@
 				};
 			};
 
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sm8150-dp", "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0x0ae90a00 0 0x600>,
+				      <0 0x0ae91000 0 0x600>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SM8250_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp_out: endpoint {
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
@@ -3932,6 +4046,7 @@
 				      "dp_phy_pll_link_clk",
 				      "dp_phy_pll_vco_div_clk";
 			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -4170,7 +4285,7 @@
 			compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index 85e5cf3dc91e..946365f15a59 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm8250.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -23,7 +24,7 @@
 /delete-node/ &xbl_aop_mem;
 
 / {
-	classis-type = "tablet";
+	chassis-type = "tablet";
 
 	/* required for bootloader to select correct board */
 	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
@@ -114,7 +115,7 @@
 	};
 
 	reserved-memory {
-		xbl_aop_mem: xbl-aop@80700000 {
+		xbl_aop_mem: xbl-aop@80600000 {
 			reg = <0x0 0x80600000 0x0 0x260000>;
 			no-map;
 		};
@@ -627,6 +628,41 @@
 	};
 };
 
+&pm8150b_typec {
+	vdd-pdphy-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "source";
+		data-role = "dual";
+		self-powered;
+
+		source-pdos = <PDO_FIXED(5000, 3000,
+					 PDO_FIXED_DUAL_ROLE |
+					 PDO_FIXED_USB_COMM |
+					 PDO_FIXED_DATA_SWAP)>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				pm8150b_role_switch_in: endpoint {
+					remote-endpoint = <&usb_1_role_switch_out>;
+				};
+			};
+		};
+	};
+};
+
+&pm8150b_vbus {
+	status = "okay";
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -664,11 +700,12 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 	maximum-speed = "high-speed";
 	/* Remove USB3 phy */
 	phys = <&usb_1_hsphy>;
 	phy-names = "usb2-phy";
+	usb-role-switch;
 };
 
 &usb_1_hsphy {
@@ -678,6 +715,10 @@
 	status = "okay";
 };
 
+&usb_1_role_switch_out {
+	remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
 &ufs_mem_hc {
 	vcc-supply = <&vreg_l17a_3p0>;
 	vcc-max-microamp = <800000>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
new file mode 100644
index 000000000000..86e1f7fd1c20
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
@@ -0,0 +1,623 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Copyright (c) 2023 Luka Panio <lukapanio@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/*
+ * Delete following upstream (sm8250.dtsi) reserved
+ * memory mappings which are different on this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_secure_heap;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &xbl_aop_mem;
+
+/ {
+
+	model = "Xiaomi Pad 6";
+	compatible = "xiaomi,pipa", "qcom,sm8250";
+
+	chassis-type = "tablet";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
+	qcom,board-id = <0x34 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			width = <1800>;
+			height = <2880>;
+			stride = <(1800 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	battery_l: battery-l {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16700000>;
+		charge-full-design-microamp-hours = <4420000>;
+	};
+
+	battery_r: battery-r {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16700000>;
+		charge-full-design-microamp-hours = <4420000>;
+	};
+
+	bl_vddpos_5p5: bl-vddpos-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddpos_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	bl_vddneg_5p5: bl-vddneg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddneg_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		xbl_aop_mem: xbl-aop@80700000 {
+			reg = <0x0 0x80600000 0x0 0x260000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@88c00000 {
+			reg = <0x0 0x88c00000 0x0 0x2f00000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8bb00000 {
+			reg = <0x0 0x8bb00000 0x0 0x2500000>;
+			no-map;
+		};
+
+		spss_mem: spss@8e000000 {
+			reg = <0x0 0x8e000000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: cdsp-secure-heap@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x4600000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@b0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xb0000000 0x0 0x400000>;
+			record-size = <0x1000>;
+			console-size = <0x200000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/adsp.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		/* (S1+S2+S3) - cx.lvl (ARC) */
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L7 is unused. */
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L10 is unused, L11 - lcx.lvl (ARC) */
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L13 is unused. */
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-name = "vreg_l14a_1p88";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L15 & L16 are unused. */
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p9: ldo18 {
+			regulator-name = "vreg_l18a_0p9";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p35>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3350000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		/*
+		 * S1-S6 are ARCs:
+		 * (S1+S2) - gfx.lvl,
+		 * S3 - mx.lvl,
+		 * (S4+S5) - mmcx.lvl,
+		 * S6 - ebi.lvl
+		 */
+
+		vreg_s7c_0p35: smps7 {
+			regulator-name = "vreg_s7c_0p35";
+			regulator-min-microvolt = <348000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p35: smps8 {
+			regulator-name = "vreg_s8c_1p35";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L2-4 are unused. */
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_2p85: ldo7 {
+			regulator-name = "vreg_l7c_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-name = "vreg_l10c_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p0: ldo11 {
+			regulator-name = "vreg_l11c_3p0";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p35>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_s1f_1p2: smps1 {
+			regulator-name = "vreg_s1f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2f_0p5: smps2 {
+			regulator-name = "vreg_s2f_0p5";
+			regulator-min-microvolt = <512000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L1 is unused. */
+
+		vreg_l2f_1p3: ldo2 {
+			regulator-name = "vreg_l2f_1p3";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L3 & L4 are unused. */
+
+		vreg_l5f_2p8: ldo5 {
+			regulator-name = "vreg_l5f_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p8: ldo6 {
+			regulator-name = "vreg_l6f_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/cdsp.mbn";
+	status = "okay";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_r>;
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	backlight: backlight@11 {
+		compatible = "kinetic,ktz8866";
+		reg = <0x11>;
+		vddpos-supply = <&bl_vddpos_5p5>;
+		vddneg-supply = <&bl_vddneg_5p5>;
+		enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+		current-num-sinks = <5>;
+		kinetic,current-ramp-delay-ms = <128>;
+		kinetic,led-enable-ramp-delay-ms = <1>;
+		kinetic,enable-lcd-bias;
+	};
+};
+
+&i2c13 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_l>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&pm8150_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/slpi.mbn";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/venus.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index be970472f6c4..760501c1301a 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -671,6 +671,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8250", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
 			#reset-cells = <1>;
 		};
 	};
@@ -2123,7 +2124,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -2227,7 +2228,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2328,7 +2329,7 @@
 			status = "disabled";
 		};
 
-		pcie2: pci@1c10000 {
+		pcie2: pcie@1c10000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c10000 0 0x3000>,
 			      <0 0x64000000 0 0xf1d>,
@@ -2434,7 +2435,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2463,29 +2464,48 @@
 				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
-			freq-table-hz =
-				<37500000 300000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 300000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
+
+			operating-points-v2 = <&ufs_opp_table>;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-37500000 {
+					opp-hz = /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8250-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -2493,16 +2513,10 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x16c>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x16c>,
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -2543,6 +2557,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sm8250-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
 		wsamacro: codec@3240000 {
 			compatible = "qcom,sm8250-lpass-wsa-macro";
 			reg = <0 0x03240000 0 0x1000>;
@@ -2565,7 +2584,7 @@
 			status = "disabled";
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			reg = <0 0x03250000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
@@ -2631,7 +2650,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			reg = <0 0x03210000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			status = "disabled";
@@ -2678,7 +2697,7 @@
 		};
 
 		/* tx macro */
-		swr2: soundwire-controller@3230000 {
+		swr2: soundwire@3230000 {
 			reg = <0 0x03230000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
@@ -3095,11 +3114,8 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					tpda_out_funnel_qatb: endpoint {
 						remote-endpoint = <&funnel_qatb_in_tpda>;
 					};
@@ -3142,11 +3158,7 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_qatb_in_tpda: endpoint {
 						remote-endpoint = <&tpda_out_funnel_qatb>;
 					};
@@ -3355,11 +3367,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					etf_in_funnel_swao_out: endpoint {
 						remote-endpoint = <&funnel_swao_out_etf>;
 					};
@@ -3443,8 +3452,6 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				port {
 					tpdm_mm_out_tpda9: endpoint {
 						remote-endpoint = <&tpda_9_in_tpdm_mm>;
@@ -3710,11 +3717,7 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_apss_merg_in_funnel_apss: endpoint {
 					remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
 					};
@@ -3889,32 +3892,26 @@
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8250-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x200>,
-				      <0 0x088eb400 0 0x200>,
-				      <0 0x088eb800 0 0x800>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		sdhc_2: mmc@8804000 {
@@ -4141,6 +4138,7 @@
 					  "dp_hs_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
+			wakeup-source;
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
@@ -4209,6 +4207,7 @@
 					  "dp_hs_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
+			wakeup-source;
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
@@ -4223,7 +4222,7 @@
 				iommus = <&apps_smmu 0x20 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -6018,7 +6017,7 @@
 			compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index b46236235b7f..e78c83a897c2 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -289,6 +289,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8350", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
 			#reset-cells = <1>;
 		};
 	};
@@ -677,9 +678,9 @@
 				 <0>,
 				 <0>,
 				 <0>,
-				 <&ufs_mem_phy_lanes 0>,
-				 <&ufs_mem_phy_lanes 1>,
-				 <&ufs_mem_phy_lanes 2>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
 				 <0>;
 		};
@@ -919,9 +920,9 @@
 			};
 		};
 
-		gpi_dma0: dma-controller@9800000 {
+		gpi_dma0: dma-controller@900000 {
 			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
-			reg = <0 0x09800000 0 0x60000>;
+			reg = <0 0x00900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -1498,7 +1499,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8350";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1591,7 +1592,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8350";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1679,7 +1680,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -1723,10 +1724,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -1734,17 +1733,11 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -1818,6 +1811,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sm8350-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
 		lpass_tlmm: pinctrl@33c0000 {
 			compatible = "qcom,sm8350-lpass-lpi-pinctrl";
 			reg = <0 0x033c0000 0 0x20000>,
@@ -2021,7 +2019,7 @@
 			compatible = "qcom,sm8350-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
 
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2063,7 +2061,7 @@
 			compatible = "qcom,sm8350-slpi-pas";
 			reg = <0 0x05c00000 0 0x4000>;
 
-			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2238,34 +2236,27 @@
 			};
 		};
 
-		usb_2_qmpphy: phy-wrapper@88eb000 {
+		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8350-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
+			reg = <0 0x088eb000 0 0x2000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
-
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			usb_2_ssphy: phy@88ebe00 {
-				reg = <0 0x088ebe00 0 0x200>,
-				      <0 0x088ec000 0 0x200>,
-				      <0 0x088eb200 0 0x1100>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 		};
 
 		dc_noc: interconnect@90c0000 {
@@ -2418,7 +2409,7 @@
 				iommus = <&apps_smmu 0x20 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -2453,35 +2444,6 @@
 			#size-cells = <2>;
 			ranges;
 
-			dpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				/* TODO: opp-200000000 should work with
-				 * &rpmhpd_opp_low_svs, but one some of
-				 * sm8350_hdk boards reboot using this
-				 * opp.
-				 */
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
-					required-opps = <&rpmhpd_opp_svs>;
-				};
-
-				opp-300000000 {
-					opp-hz = /bits/ 64 <300000000>;
-					required-opps = <&rpmhpd_opp_svs>;
-				};
-
-				opp-345000000 {
-					opp-hz = /bits/ 64 <345000000>;
-					required-opps = <&rpmhpd_opp_svs_l1>;
-				};
-
-				opp-460000000 {
-					opp-hz = /bits/ 64 <460000000>;
-					required-opps = <&rpmhpd_opp_nom>;
-				};
-			};
-
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8350-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
@@ -2510,6 +2472,35 @@
 				interrupt-parent = <&mdss>;
 				interrupts = <0>;
 
+				dpu_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					/* TODO: opp-200000000 should work with
+					 * &rpmhpd_opp_low_svs, but one some of
+					 * sm8350_hdk boards reboot using this
+					 * opp.
+					 */
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -3207,7 +3198,7 @@
 			compatible = "qcom,sm8350-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3512,7 +3503,7 @@
 			compatible = "qcom,sm8350-cdsp-pas";
 			reg = <0 0x98900000 0 0x1400000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index 20153d08edde..a20d5d76af35 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -580,6 +580,14 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8450/a730_zap.mbn";
+	};
+};
+
 &i2c9 {
 	clock-frequency = <400000>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 1783fa78bdbc..01e4dfc4babd 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-camcc.h>
 #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8450-gpucc.h>
 #include <dt-bindings/clock/qcom,sm8450-videocc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
@@ -18,6 +19,7 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,sm8450.h>
+#include <dt-bindings/reset/qcom,sm8450-gpucc.h>
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
@@ -754,9 +756,9 @@
 				 <&pcie0_phy>,
 				 <&pcie1_phy>,
 				 <0>,
-				 <&ufs_mem_phy_lanes 0>,
-				 <&ufs_mem_phy_lanes 1>,
-				 <&ufs_mem_phy_lanes 2>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo",
 				      "sleep_clk",
@@ -1739,7 +1741,12 @@
 			};
 		};
 
-		pcie0: pci@1c00000 {
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8450-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8450-pcie0";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1848,7 +1855,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8450-pcie1";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2014,6 +2021,206 @@
 			reg = <0x0 0x1fc0000 0x0 0x30000>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-730.1", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-818000000 {
+					opp-hz = /bits/ 64 <818000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+				};
+
+				opp-791000000 {
+					opp-hz = /bits/ 64 <791000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-734000000 {
+					opp-hz = /bits/ 64 <734000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-640000000 {
+					opp-hz = /bits/ 64 <640000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-599000000 {
+					opp-hz = /bits/ 64 <599000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-545000000 {
+					opp-hz = /bits/ 64 <545000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-492000000 {
+					opp-hz = /bits/ 64 <492000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-421000000 {
+					opp-hz = /bits/ 64 <421000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+				};
+
+				opp-350000000 {
+					opp-hz = /bits/ 64 <350000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-317000000 {
+					opp-hz = /bits/ 64 <317000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-285000000 {
+					opp-hz = /bits/ 64 <285000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-730.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b290000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8450-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8450-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "gmu",
+				      "hub",
+				      "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
 		usb_1_hsphy: phy@88e3000 {
 			compatible = "qcom,sm8450-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";
@@ -2149,18 +2356,13 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "wsa2-mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa2_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr4: soundwire-controller@31f0000 {
+		swr4: soundwire@31f0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x031f0000 0 0x2000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2168,6 +2370,9 @@
 			clock-names = "iface";
 			label = "WSA2";
 
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
 
@@ -2197,18 +2402,12 @@
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2218,6 +2417,9 @@
 			qcom,din-ports = <0>;
 			qcom,dout-ports = <5>;
 
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
 			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
@@ -2243,14 +2445,9 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
@@ -2264,18 +2461,12 @@
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03250000 0 0x2000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2283,6 +2474,9 @@
 			clock-names = "iface";
 			label = "WSA";
 
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
 
@@ -2302,17 +2496,20 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@33b0000 {
+		swr2: soundwire@33b0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x033b0000 0 0x2000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wakeup";
 
-			clocks = <&vamacro>;
+			clocks = <&txmacro>;
 			clock-names = "iface";
 			label = "TX";
 
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
 			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
@@ -2339,8 +2536,6 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "mclk", "macro", "dcodec", "npl";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
@@ -4122,7 +4317,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -4171,10 +4366,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8450-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref", "ref_aux", "qref";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
@@ -4182,17 +4375,11 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		ice: crypto@1d88000 {
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 9a70875028b7..c1135ad5fa69 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -10,6 +10,7 @@
 #include "pm8010.dtsi"
 #include "pm8550.dtsi"
 #include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
 #include "pm8550ve.dtsi"
 #include "pm8550vs.dtsi"
 #include "pmk8550.dtsi"
@@ -510,6 +511,134 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p8>;
+		vdd-l6-supply = <&vreg_s6g_1p8>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8550/a740_zap.mbn";
+	};
 };
 
 &i2c_master_hub_0 {
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index eef811def39b..d401d63e5c4d 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -11,6 +11,7 @@
 #include "pm8010.dtsi"
 #include "pm8550.dtsi"
 #include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
 #include "pm8550ve.dtsi"
 #include "pm8550vs.dtsi"
 #include "pmk8550.dtsi"
@@ -527,6 +528,126 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_s6g_1p86>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
 };
 
 &i2c_master_hub_0 {
@@ -585,6 +706,13 @@
 	};
 };
 
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm8550/ipa_fws.mbn";
+	status = "okay";
+};
+
 &gcc {
 	clocks = <&bi_tcxo_div2>, <&sleep_clk>,
 		 <&pcie0_phy>,
@@ -596,6 +724,14 @@
 		 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8550/a740_zap.mbn";
+	};
+};
+
 &lpass_tlmm {
 	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
 		pins = "gpio17";
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 7b9ddde0b2c9..ee1ba5a8c8fc 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -285,9 +285,9 @@
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <800>;
+				entry-latency-us = <550>;
 				exit-latency-us = <750>;
-				min-residency-us = <4090>;
+				min-residency-us = <6700>;
 				local-timer-stop;
 			};
 
@@ -296,8 +296,18 @@
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
 				entry-latency-us = <600>;
-				exit-latency-us = <1550>;
-				min-residency-us = <4791>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			PRIME_CPU_SLEEP_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "goldplus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
 				local-timer-stop;
 			};
 		};
@@ -306,17 +316,17 @@
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
-				entry-latency-us = <1050>;
-				exit-latency-us = <2500>;
-				min-residency-us = <5309>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
 			};
 
 			CLUSTER_SLEEP_1: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c344>;
-				entry-latency-us = <2700>;
-				exit-latency-us = <3500>;
-				min-residency-us = <13959>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
 			};
 		};
 	};
@@ -324,6 +334,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8550", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x19000>;
 			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
 		};
 	};
@@ -400,7 +411,7 @@
 		CPU_PD7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			domain-idle-states = <&PRIME_CPU_SLEEP_0>;
 		};
 
 		CLUSTER_PD: power-domain-cluster {
@@ -1677,7 +1688,12 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8550-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pcie@1c00000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8550";
 			reg = <0 0x01c00000 0 0x3000>,
@@ -1768,7 +1784,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8550";
 			reg = <0x0 0x01c08000 0x0 0x3000>,
@@ -1979,6 +1995,128 @@
 			#reset-cells = <1>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-43050a01", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x0>,
+				 <&adreno_smmu 1 0x0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			/* Speedbin needs more work on A740+, keep only lower freqs */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-680000000 {
+					opp-hz = /bits/ 64 <680000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-615000000 {
+					opp-hz = /bits/ 64 <615000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-475000000 {
+					opp-hz = /bits/ 64 <475000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+				};
+
+				opp-401000000 {
+					opp-hz = /bits/ 64 <401000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-348000000 {
+					opp-hz = /bits/ 64 <348000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+				};
+
+				opp-295000000 {
+					opp-hz = /bits/ 64 <295000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-740.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b280000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x0>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
 		gpucc: clock-controller@3d90000 {
 			compatible = "qcom,sm8550-gpucc";
 			reg = <0 0x03d90000 0 0xa000>;
@@ -1990,6 +2128,89 @@
 			#power-domain-cells = <1>;
 		};
 
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8550-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sm8550-ipa";
+
+			iommus = <&apps_smmu 0x4a0 0x0>,
+				 <&apps_smmu 0x4a2 0x0>;
+			reg = <0 0x3f40000 0 0x10000>,
+			      <0 0x3f50000 0 0x5000>,
+			      <0 0x3e04000 0 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8550-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
@@ -2040,17 +2261,13 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "wsa2-mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa2_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr3: soundwire-controller@6ab0000 {
+		swr3: soundwire@6ab0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ab0000 0 0x10000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2058,6 +2275,9 @@
 			clock-names = "iface";
 			label = "WSA2";
 
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
@@ -2086,17 +2306,12 @@
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@6ad0000 {
+		swr1: soundwire@6ad0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ad0000 0 0x10000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2104,18 +2319,21 @@
 			clock-names = "iface";
 			label = "RX";
 
-			qcom,din-ports = <0>;
-			qcom,dout-ports = <10>;
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <1>;
+			qcom,dout-ports = <11>;
 
-			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
-			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
 
 			#address-cells = <2>;
 			#size-cells = <0>;
@@ -2131,14 +2349,9 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
@@ -2151,17 +2364,12 @@
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@6b10000 {
+		swr0: soundwire@6b10000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06b10000 0 0x10000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2169,6 +2377,9 @@
 			clock-names = "iface";
 			label = "WSA";
 
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
@@ -2188,16 +2399,19 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@6d30000 {
+		swr2: soundwire@6d30000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06d30000 0 0x10000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wakeup";
-			clocks = <&lpass_vamacro>;
+			clocks = <&lpass_txmacro>;
 			clock-names = "iface";
 			label = "TX";
 
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
 			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
@@ -2224,9 +2438,6 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "mclk", "macro", "dcodec";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
 			#sound-dai-cells = <1>;
@@ -2923,8 +3134,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
new file mode 100644
index 000000000000..be133a3d5cbe
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
@@ -0,0 +1,727 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8650 MTP";
+	compatible = "qcom,sm8650-mtp", "qcom,sm8650";
+
+	aliases {
+		serial0 = &uart15;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8650-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s1c_1p2>;
+		vdd-l12-supply = <&vreg_s6c_1p8>;
+		vdd-l15-supply = <&vreg_s6c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1c_1p2>;
+		vdd-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "c";
+
+		vreg_s1c_1p2: smps1 {
+			regulator-name = "vreg_s1c_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1348000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3c_0p9: smps3 {
+			regulator-name = "vreg_s3c_0p9";
+			regulator-min-microvolt = <976000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p2: smps4 {
+			regulator-name = "vreg_s4c_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1280000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5c_0p7: smps5 {
+			regulator-name = "vreg_s5c_0p7";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6c_1p8: smps6 {
+			regulator-name = "vreg_s6c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-name = "vreg_l3c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "e";
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-name = "vreg_l3e_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "g";
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_0p91: ldo3 {
+			regulator-name = "vreg_l3g_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l2-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s4i_0p85: smps4 {
+			regulator-name = "vreg_s4i_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_0p88: ldo1 {
+			regulator-name = "vreg_l1i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_0p88: ldo2 {
+			regulator-name = "vreg_l2i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_1p2: ldo3 {
+			regulator-name = "vreg_l3i_0p91";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1i_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3e_0p9>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+	vdda-qref-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio12";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		output-disable;
+		power-source = <1>; /* 1.8 V */
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8650/adsp.mbn",
+			"qcom/sm8650/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8650/cdsp.mbn",
+			"qcom/sm8650/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8650/modem.mbn",
+			"qcom/sm8650/modem_dtb.mbn";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker Left */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+
+	/* WSA8845, Speaker Right */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>, <74 1>;
+
+	disp0_reset_n_active: disp0-reset-n-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_active: mdp-vsync-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_suspend: mdp-vsync-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart15 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1c_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C
+ * USB SS -> USB-C
+ */
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1i_0p88>;
+	vdda12-supply = <&vreg_l3i_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3i_1p2>;
+	vdda-pll-supply = <&vreg_l3g_0p91>;
+
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
new file mode 100644
index 000000000000..b9151c2ddf2e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
@@ -0,0 +1,811 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8650 QRD";
+	compatible = "qcom,sm8650-qrd", "qcom,sm8650";
+
+	aliases {
+		serial0 = &uart15;
+		serial1 = &uart14;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8650-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s1c_1p2>;
+		vdd-l12-supply = <&vreg_s6c_1p8>;
+		vdd-l15-supply = <&vreg_s6c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1c_1p2>;
+		vdd-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "c";
+
+		vreg_s1c_1p2: smps1 {
+			regulator-name = "vreg_s1c_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1348000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3c_0p9: smps3 {
+			regulator-name = "vreg_s3c_0p9";
+			regulator-min-microvolt = <976000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p2: smps4 {
+			regulator-name = "vreg_s4c_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1280000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5c_0p7: smps5 {
+			regulator-name = "vreg_s5c_0p7";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6c_1p8: smps6 {
+			regulator-name = "vreg_s6c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-name = "vreg_l3c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "e";
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-name = "vreg_l3e_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "g";
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_0p91: ldo3 {
+			regulator-name = "vreg_l3g_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l2-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s4i_0p85: smps4 {
+			regulator-name = "vreg_s4i_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_0p88: ldo1 {
+			regulator-name = "vreg_l1i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_0p88: ldo2 {
+			regulator-name = "vreg_l2i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_1p2: ldo3 {
+			regulator-name = "vreg_l3i_0p91";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm8650/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1i_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		power-source = <1>;
+	};
+};
+
+&pm8550_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pmk8550_rtc {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8650/adsp.mbn",
+			"qcom/sm8650/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8650/cdsp.mbn",
+			"qcom/sm8650/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8650/modem.mbn",
+			"qcom/sm8650/modem_dtb.mbn";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&spi4 {
+	status = "okay";
+
+	touchscreen@0 {
+		compatible = "goodix,gt9916";
+		reg = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <162 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
+
+		avdd-supply = <&vreg_l14b_3p2>;
+
+		spi-max-frequency = <1000000>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2400>;
+
+		pinctrl-0 = <&ts_irq>, <&ts_reset>;
+		pinctrl-names = "default";
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>, <74 1>;
+
+	bt_default: bt-default-state {
+		bt-en-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sw-ctrl-pins {
+			pins = "gpio18";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	disp0_reset_n_active: disp0-reset-n-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_active: mdp-vsync-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_suspend: mdp-vsync-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_irq: ts-irq-state {
+		pins = "gpio161";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-disable;
+	};
+
+	ts_reset: ts-reset-state {
+		pins = "gpio162";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+		vddio-supply = <&vreg_l3c_1p2>;
+		vddaon-supply = <&vreg_l15b_1p8>;
+		vdddig-supply = <&vreg_s3c_0p9>;
+		vddrfa0p8-supply = <&vreg_s3c_0p9>;
+		vddrfa1p2-supply = <&vreg_s1c_1p2>;
+		vddrfa1p9-supply = <&vreg_s6c_1p8>;
+
+		max-speed = <3200000>;
+
+		enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bt_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart15 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1c_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
+ * USB SS -> NB7VPQ904MMUTWG -> USB-C
+ */
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1i_0p88>;
+	vdda12-supply = <&vreg_l3i_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3i_1p2>;
+	vdda-pll-supply = <&vreg_l3g_0p91>;
+
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
new file mode 100644
index 000000000000..2df77123a8c7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -0,0 +1,6013 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8650-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gpucc.h>
+#include <dt-bindings/clock/qcom,sm8650-tcsr.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sm8650-gpucc.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a520";
+			reg = <0 0>;
+
+			clocks = <&cpufreq_hw 0>;
+
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			#cooling-cells = <2>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a520";
+			reg = <0 0x100>;
+
+			clocks = <&cpufreq_hw 0>;
+
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x200>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x300>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x400>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x500>;
+
+			clocks = <&cpufreq_hw 1>;
+
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			#cooling-cells = <2>;
+
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x600>;
+
+			clocks = <&cpufreq_hw 1>;
+
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			#cooling-cells = <2>;
+
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x4";
+			reg = <0 0x700>;
+
+			clocks = <&cpufreq_hw 2>;
+
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			capacity-dmips-mhz = <1894>;
+			dynamic-power-coefficient = <588>;
+
+			qcom,freq-domain = <&cpufreq_hw 2>;
+
+			#cooling-cells = <2>;
+
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			SILVER_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <550>;
+				exit-latency-us = <750>;
+				min-residency-us = <6700>;
+				local-timer-stop;
+			};
+
+			GOLD_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			GOLD_PLUS_CPU_SLEEP_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-plus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8650", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sm8650-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sm8650-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0xa0000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_PLUS_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>,
+					     <&CLUSTER_SLEEP_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@80000000 {
+			reg = <0 0x80000000 0 0xe00000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: cpusys-vm@80e00000 {
+			reg = <0 0x80e00000 0 0x400000>;
+			no-map;
+		};
+
+		/* Merged xbl_dtlog, xbl_ramdump and aop_image regions */
+		xbl_dt_log_merged_mem: xbl-dt-log-merged@81a00000 {
+			reg = <0 0x81a00000 0 0x260000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x81c60000 0 0x20000>;
+			no-map;
+		};
+
+		/* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */
+		aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 {
+			reg = <0 0x81c80000 0 0x74000>;
+			no-map;
+		};
+
+		/* Secdata region can be reused by apps */
+
+		smem: smem@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0 0x81d00000 0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		adsp_mhi_mem: adsp-mhi@81f00000 {
+			reg = <0 0x81f00000 0 0x20000>;
+			no-map;
+		};
+
+		pvmfw_mem: pvmfw@824a0000 {
+			reg = <0 0x824a0000 0 0x100000>;
+			no-map;
+		};
+
+		global_sync_mem: global-sync@82600000 {
+			reg = <0 0x82600000 0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0 0x82700000 0 0x100000>;
+			no-map;
+		};
+
+		qdss_mem: qdss@82800000 {
+			reg = <0 0x82800000 0 0x2000000>;
+			no-map;
+		};
+
+		mpss_dsm_mem: mpss-dsm@86b00000 {
+			reg = <0 0x86b00000 0 0x4900000>;
+			no-map;
+		};
+
+		mpss_dsm_mem_2: mpss-dsm-2@8b400000 {
+			reg = <0 0x8b400000 0 0x800000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8bc00000 {
+			reg = <0 0x8bc00000 0 0xf400000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb@9b000000 {
+			reg = <0 0x9b000000 0 0x80000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@9b080000 {
+			reg = <0 0x9b080000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@9b090000 {
+			reg = <0 0x9b090000 0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code@9b09a000 {
+			reg = <0 0x9b09a000 0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: spss@9b0a0000 {
+			reg = <0 0x9b0a0000 0 0x1e0000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: spu-tz-shared@9b280000 {
+			reg = <0 0x9b280000 0 0x60000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: spu-modem-shared@9b2e0000 {
+			reg = <0 0x9b2e0000 0 0x20000>;
+			no-map;
+		};
+
+		camera_mem: camera@9b300000 {
+			reg = <0 0x9b300000 0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video@9bb00000 {
+			reg = <0 0x9bb00000 0 0x800000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@9c300000 {
+			reg = <0 0x9c300000 0 0x700000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@9ca00000 {
+			reg = <0 0x9ca00000 0 0x1400000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@9de00000 {
+			reg = <0 0x9de00000 0 0x80000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@9de80000 {
+			reg = <0 0x9de80000 0 0x80000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@9df00000 {
+			reg = <0 0x9df00000 0 0x4080000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@d7c00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xd7c00000 0 0x400000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+
+		/* Merged tz_reserved, xbl_sc, cpucp_fw and qtee regions */
+		tz_merged_mem: tz-merged@d8000000 {
+			reg = <0 0xd8000000 0 0x800000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf@e6440000 {
+			reg = <0 0xe6440000 0 0x2dd000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: trust-ui-vm@f3800000 {
+			reg = <0 0xf3800000 0 0x4400000>;
+			no-map;
+		};
+
+		oem_vm_mem: oem-vm@f7c00000 {
+			reg = <0 0xf7c00000 0 0x4c00000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0 0xff800000 0 0x600000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <443>, <429>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <94>, <432>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <435>, <428>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm8650-gcc";
+			reg = <0 0x00100000 0 0x1f4200>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <&pcie_1_phy_aux_clk>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
+				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipcc: mailbox@406000 {
+			compatible = "qcom,sm8650-ipcc", "qcom,ipcc";
+			reg = <0 0x00406000 0 0x1000>;
+
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0>;
+
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0>;
+
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart14: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			uart15: serial@89c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart15_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+		};
+
+		i2c_master_hub_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-i2c-master-hub";
+			reg = <0 0x009c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
+			clock-names = "s-ahb";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c_hub_0: i2c@980000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00980000 0 0x4000>;
+
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_1: i2c@984000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00984000 0 0x4000>;
+
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_2: i2c@988000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00988000 0 0x4000>;
+
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_3: i2c@98c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x0098c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_4: i2c@990000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00990000 0 0x4000>;
+
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_5: i2c@994000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00994000 0 0x4000>;
+
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_6: i2c@998000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00998000 0 0x4000>;
+
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_7: i2c@99c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x0099c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_8: i2c@9a0000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a0000 0 0x4000>;
+
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_9: i2c@9a4000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a4000 0 0x4000>;
+
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0xc>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0xb6 0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
+
+			iommus = <&apps_smmu 0xa3 0>;
+
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi2: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi7: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,sm8650-cnoc-main";
+			reg = <0 0x01500000 0 0x14080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,sm8650-config-noc";
+			reg = <0 0x01600000 0 0x6200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8650-system-noc";
+			reg = <0 0x01680000 0 0x1d080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sm8650-pcie-anoc";
+			reg = <0 0x016c0000 0 0x12200>;
+
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8650-aggre1-noc";
+			reg = <0 0x016e0000 0 0x16400>;
+
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8650-aggre2-noc";
+			reg = <0 0x01700000 0 0x1e400>;
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,sm8650-mmss-noc";
+			reg = <0 0x01780000 0 0x5b800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8650-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pci@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			iommu-map = <0     &apps_smmu 0x1400 0x1>,
+				    <0x100 &apps_smmu 0x1401 0x1>;
+
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			#interrupt-cells = <1>;
+
+			linux,pci-domain = <0>;
+			num-lanes = <2>;
+			bus-range = <0 0xff>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x60200000 0 0x100000>,
+				 <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>;
+
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			power-domains = <&gcc PCIE_0_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie1: pci@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>,
+				 <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			iommu-map = <0     &apps_smmu 0x1480 0x1>,
+				    <0x100 &apps_smmu 0x1481 0x1>;
+
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			#interrupt-cells = <1>;
+
+			linux,pci-domain = <1>;
+			num-lanes = <2>;
+			bus-range = <0 0xff>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			dma-coherent;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>,
+				 <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>,
+				 <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
+
+			power-domains = <&gcc PCIE_1_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x28000>;
+
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+			#dma-cells = <1>;
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+		};
+
+		ufs_mem_phy: phy@1d80000 {
+			compatible = "qcom,sm8650-qmp-ufs-phy";
+			reg = <0 0x01d80000 0 0x2000>;
+
+			clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref",
+				      "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			power-domains = <&gcc UFS_MEM_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <100000000 403000000>,
+					<0 0>,
+					<0 0>,
+					<100000000 403000000>,
+					<100000000 403000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x60 0>;
+
+			lanes-per-direction = <2>;
+			qcom,ice = <&ice>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			#reset-cells = <1>;
+
+			status = "disabled";
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8650-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: clock-controller@1fc0000 {
+			compatible = "qcom,sm8650-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0xa0000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8650-gpucc";
+			reg = <0 0x03d90000 0 0xa000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sm8650-ipa", "qcom,sm8550-ipa";
+
+			iommus = <&apps_smmu 0x4a0 0x0>,
+				 <&apps_smmu 0x4a2 0x0>;
+			reg = <0 0x3f40000 0 0x10000>,
+			      <0 0x3f50000 0 0x5000>,
+			      <0 0x3e04000 0 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8650-mpss-pas";
+			reg = <0 0x04080000 0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx",
+					     "mss";
+
+			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
+					<&mpss_dsm_mem>, <&mpss_dsm_mem_2>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <1>;
+
+				label = "mpss";
+			};
+		};
+
+		lpass_wsa2macro: codec@6aa0000 {
+			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06aa0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr3: soundwire@6ab0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ab0000 0 0x10000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa2macro>;
+			clock-names = "iface";
+			label = "WSA2";
+
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_rxmacro: codec@6ac0000 {
+			compatible = "qcom,sm8650-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
+			reg = <0 0x06ac0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire@6ad0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ad0000 0 0x10000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <11>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_txmacro: codec@6ae0000 {
+			compatible = "qcom,sm8650-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
+			reg = <0 0x06ae0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_wsamacro: codec@6b00000 {
+			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06b00000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire@6b10000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06b10000 0 0x10000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsamacro>;
+			clock-names = "iface";
+			label = "WSA";
+
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		swr2: soundwire@6d30000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06d30000 0 0x10000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+			clocks = <&lpass_txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_vamacro: codec@6d44000 {
+			compatible = "qcom,sm8650-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
+			reg = <0 0x06d44000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec";
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_tlmm: pinctrl@6e80000 {
+			compatible = "qcom,sm8650-lpass-lpi-pinctrl";
+			reg = <0 0x06e80000 0 0x20000>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,sm8650-lpass-lpiaon-noc";
+			reg = <0 0x07400000 0 0x19080>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_lpicx_noc: interconnect@7430000 {
+			compatible = "qcom,sm8650-lpass-lpicx-noc";
+			reg = <0 0x07430000 0 0x3a200>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,sm8650-lpass-ag-noc";
+			reg = <0 0x07e40000 0 0xe080>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			iommus = <&apps_smmu 0x540 0>;
+
+			bus-width = <4>;
+
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8650-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x1c00 0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8650-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupts-extended = <&mdss 0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-514000000 {
+						opp-hz = /bits/ 64 <514000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupts-extended = <&mdss 4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae95000 {
+				compatible = "qcom,sm8650-dsi-phy-4nm";
+				reg = <0 0x0ae95000 0 0x200>,
+				      <0 0x0ae95200 0 0x280>,
+				      <0 0x0ae95500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupts-extended = <&mdss 5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae97000 {
+				compatible = "qcom,sm8650-dsi-phy-4nm";
+				reg = <0 0x0ae97000 0 0x200>,
+				      <0 0x0ae97200 0 0x280>,
+				      <0 0x0ae97500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dp0: displayport-controller@af54000 {
+				compatible = "qcom,sm8650-dp";
+				reg = <0 0xaf54000 0 0x104>,
+				      <0 0xaf54200 0 0xc0>,
+				      <0 0xaf55000 0 0x770>,
+				      <0 0xaf56000 0 0x9c>,
+				      <0 0xaf57000 0 0x9c>;
+
+				interrupts-extended = <&mdss 12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				operating-points-v2 = <&dp_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8650-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "disabled";
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8650-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x088e3000 0 0x154>;
+
+			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8650-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			power-domains = <&gcc USB3_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&tcsr TCSR_USB3_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+				iommus = <&apps_smmu 0x40 0>;
+
+				phys = <&usb_1_hsphy>,
+				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,usb2-gadget-lpm-disable;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,is-utmi-l1-suspend;
+				snps,usb3_lpm_capable;
+				snps,usb2-lpm-disable;
+				snps,has-lpm-erratum;
+				tx-fifo-resize;
+
+				dma-coherent;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8650-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+			interrupt-parent = <&intc>;
+
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>, <126 716 12>,
+					  <138 251 5>, <143 244 4>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c228000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c228000 0 0x1000>, /* TM */
+			      <0 0x0c222000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <15>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c229000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c229000 0 0x1000>, /* TM */
+			      <0 0x0c223000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens2: thermal-sensor@c22a000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c22a000 0 0x1000>, /* TM */
+			      <0 0x0c224000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <13>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c400000 0 0x3000>,
+			      <0 0x0c500000 0 0x4000000>,
+			      <0 0x0c440000 0 0x80000>,
+			      <0 0x0c4c0000 0 0x20000>,
+			      <0 0x0c42d000 0 0x4000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			qcom,bus-id = <0>;
+
+			interrupt-controller;
+			#interrupt-cells = <4>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8650-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 211>;
+
+			wakeup-parent = <&pdc>;
+
+			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "i2chub0_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c1_data_clk: hub-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio66", "gpio67";
+				function = "i2chub0_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c2_data_clk: hub-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "i2chub0_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c3_data_clk: hub-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio70", "gpio71";
+				function = "i2chub0_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c4_data_clk: hub-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio73";
+				function = "i2chub0_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c5_data_clk: hub-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio74", "gpio75";
+				function = "i2chub0_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c6_data_clk: hub-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio76", "gpio77";
+				function = "i2chub0_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c7_data_clk: hub-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio78", "gpio79";
+				function = "i2chub0_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c8_data_clk: hub-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio206", "gpio207";
+				function = "i2chub0_se8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c9_data_clk: hub-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "i2chub0_se9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio94";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio95";
+					function = "pcie0_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio96";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
+					pins = "gpio97";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio98";
+					function = "pcie1_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio99";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio60", "gpio61";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup2_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio12", "gpio13";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio24", "gpio25";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio35";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio43";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio47";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio51";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio59";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio63";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio60", "gpio61", "gpio62";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio3";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio7";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio11";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio15";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio19";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio23";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio27";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart14_default: qup-uart14-default-state {
+				/* TX, RX */
+				pins = "gpio26", "gpio27";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart14_cts_rts: qup-uart14-cts-rts-state {
+				/* CTS, RTS */
+				pins = "gpio24", "gpio25";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			qup_uart15_default: qup-uart15-default-state {
+				/* TX, RX */
+				pins = "gpio30", "gpio31";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			dma-coherent;
+		};
+
+		intc: interrupt-controller@17100000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17100000 0 0x10000>,		/* GICD */
+			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17140000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17140000 0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17420000 0 0x1000>;
+
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <0>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17a00000 0 0x10000>,
+			      <0 0x17a10000 0 0x10000>,
+			      <0 0x17a20000 0 0x10000>,
+			      <0 0x17a30000 0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&CLUSTER_PD>;
+
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8650-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8650-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm8650-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>,
+			      <0 0x17d93000 0 0x1000>,
+			      <0 0x17d94000 0 0x1000>;
+			reg-names = "freq-domain0",
+				    "freq-domain1",
+				    "freq-domain2",
+				    "freq-domain3";
+
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2",
+					  "dcvsh-irq-3";
+
+			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		pmu@24091000 {
+			compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x24091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <6515000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <7980000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <10437000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <12157000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <14060000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <16113000>;
+				};
+			};
+		};
+
+		pmu@240b7400 {
+			compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x240b7400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <4577000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <7110000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <14236000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <16265000>;
+				};
+			};
+		};
+
+		gem_noc: interconnect@24100000 {
+			compatible = "qcom,sm8650-gem-noc";
+			reg = <0 0x24100000 0 0xc5080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,sm8650-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base";
+
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		remoteproc_adsp: remoteproc@30000000 {
+			compatible = "qcom,sm8650-adsp-pas";
+			reg = <0 0x30000000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <2>;
+
+				label = "lpass";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					label = "adsp";
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1043 0x20>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1044 0x20>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1045 0x20>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1046 0x20>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+
+						iommus = <&apps_smmu 0x1007 0x40>,
+							 <&apps_smmu 0x1067 0x0>,
+							 <&apps_smmu 0x1087 0x0>;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sm8650-nsp-noc";
+			reg = <0 0x320c0000 0 0xf080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8650-cdsp-pas";
+			reg = <0 0x32300000 0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP>;
+			power-domain-names = "cx",
+					     "mxc",
+					     "nsp";
+
+			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <5>;
+
+				label = "cdsp";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					label = "cdsp";
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+
+						iommus = <&apps_smmu 0x1961 0x0>,
+							 <&apps_smmu 0x0c01 0x20>,
+							 <&apps_smmu 0x19c1 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+
+						iommus = <&apps_smmu 0x1962 0x0>,
+							 <&apps_smmu 0x0c02 0x20>,
+							 <&apps_smmu 0x19c2 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+
+						iommus = <&apps_smmu 0x1963 0x0>,
+							 <&apps_smmu 0x0c03 0x20>,
+							 <&apps_smmu 0x19c3 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+
+						iommus = <&apps_smmu 0x1964 0x0>,
+							 <&apps_smmu 0x0c04 0x20>,
+							 <&apps_smmu 0x19c4 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+
+						iommus = <&apps_smmu 0x1965 0x0>,
+							 <&apps_smmu 0x0c05 0x20>,
+							 <&apps_smmu 0x19c5 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+
+						iommus = <&apps_smmu 0x1966 0x0>,
+							 <&apps_smmu 0x0c06 0x20>,
+							 <&apps_smmu 0x19c6 0x0>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+
+						iommus = <&apps_smmu 0x1967 0x0>,
+							 <&apps_smmu 0x0c07 0x20>,
+							 <&apps_smmu 0x19c7 0x0>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+
+						iommus = <&apps_smmu 0x1968 0x0>,
+							 <&apps_smmu 0x0c08 0x20>,
+							 <&apps_smmu 0x19c8 0x0>;
+					};
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-middle-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphvx0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphvx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphvx1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphvx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				video-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				ddr-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 15>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss4-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss4-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss5-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss5-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss6-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss6-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss7-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss7-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
new file mode 100644
index 000000000000..7532d8eca2de
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 CRD";
+	compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
new file mode 100644
index 000000000000..a37ad9475c90
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 QCP";
+	compatible = "qcom,x1e80100-qcp", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vph_pwr>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vph_pwr>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <33 3>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
new file mode 100644
index 000000000000..6f75fc342ceb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -0,0 +1,3527 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU8: cpu@20000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20000>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD8>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU9: cpu@20100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD9>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU10: cpu@20200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD10>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU11: cpu@20300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD11>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+
+				core1 {
+					cpu = <&CPU9>;
+				};
+
+				core2 {
+					cpu = <&CPU10>;
+				};
+
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CLUSTER_C4: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "ret";
+				arm,psci-suspend-param = <0x00000004>;
+				entry-latency-us = <180>;
+				exit-latency-us = <320>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_CL4: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "l2-ret";
+				arm,psci-suspend-param = <0x01000044>;
+				entry-latency-us = <350>;
+				exit-latency-us = <500>;
+				min-residency-us = <2500>;
+			};
+
+			CLUSTER_CL5: cluster-sleep-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "ret-pll-off";
+				arm,psci-suspend-param = <0x01000054>;
+				entry-latency-us = <2200>;
+				exit-latency-us = <2500>;
+				min-residency-us = <7000>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-x1e80100", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,x1e80100-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,x1e80100-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD8: power-domain-cpu8 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD9: power-domain-cpu9 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD10: power-domain-cpu10 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD11: power-domain-cpu11 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CLUSTER_PD0: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+
+		CLUSTER_PD1: power-domain-cpu-cluster1 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+
+		CLUSTER_PD2: power-domain-cpu-cluster2 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gunyah_hyp_mem: gunyah-hyp@80000000 {
+			reg = <0x0 0x80000000 0x0 0x800000>;
+			no-map;
+		};
+
+		hyp_elf_package_mem: hyp-elf-package@80800000 {
+			reg = <0x0 0x80800000 0x0 0x200000>;
+			no-map;
+		};
+
+		ncc_mem: ncc@80a00000 {
+			reg = <0x0 0x80a00000 0x0 0x400000>;
+			no-map;
+		};
+
+		cpucp_log_mem: cpucp-log@80e00000 {
+			reg = <0x0 0x80e00000 0x0 0x40000>;
+			no-map;
+		};
+
+		cpucp_mem: cpucp@80e40000 {
+			reg = <0x0 0x80e40000 0x0 0x540000>;
+			no-map;
+		};
+
+		reserved-region@81380000 {
+			reg = <0x0 0x81380000 0x0 0x80000>;
+			no-map;
+		};
+
+		tags_mem: tags-region@81400000 {
+			reg = <0x0 0x81400000 0x0 0x1a0000>;
+			no-map;
+		};
+
+		xbl_dtlog_mem: xbl-dtlog@81a00000 {
+			reg = <0x0 0x81a00000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump@81a40000 {
+			reg = <0x0 0x81a40000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@81c00000 {
+			reg = <0x0 0x81c00000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x81c60000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config@81c80000 {
+			reg = <0x0 0x81c80000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: tme-crash-dump@81ca0000 {
+			reg = <0x0 0x81ca0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: tme-log@81ce0000 {
+			reg = <0x0 0x81ce0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: uefi-log@81ce4000 {
+			reg = <0x0 0x81ce4000 0x0 0x10000>;
+			no-map;
+		};
+
+		secdata_apss_mem: secdata-apss@81cff000 {
+			reg = <0x0 0x81cff000 0x0 0x1000>;
+			no-map;
+		};
+
+		pdp_ns_shared_mem: pdp-ns-shared@81e00000 {
+			reg = <0x0 0x81e00000 0x0 0x100000>;
+			no-map;
+		};
+
+		gpu_prr_mem: gpu-prr@81f00000 {
+			reg = <0x0 0x81f00000 0x0 0x10000>;
+			no-map;
+		};
+
+		tpm_control_mem: tpm-control@81f10000 {
+			reg = <0x0 0x81f10000 0x0 0x10000>;
+			no-map;
+		};
+
+		usb_ucsi_shared_mem: usb-ucsi-shared@81f20000 {
+			reg = <0x0 0x81f20000 0x0 0x10000>;
+			no-map;
+		};
+
+		pld_pep_mem: pld-pep@81f30000 {
+			reg = <0x0 0x81f30000 0x0 0x6000>;
+			no-map;
+		};
+
+		pld_gmu_mem: pld-gmu@81f36000 {
+			reg = <0x0 0x81f36000 0x0 0x1000>;
+			no-map;
+		};
+
+		pld_pdp_mem: pld-pdp@81f37000 {
+			reg = <0x0 0x81f37000 0x0 0x1000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0x0 0x82700000 0x0 0x100000>;
+			no-map;
+		};
+
+		xbl_tmp_buffer_mem: xbl-tmp-buffer@82800000 {
+			reg = <0x0 0x82800000 0x0 0xc00000>;
+			no-map;
+		};
+
+		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@84b00000 {
+			reg = <0x0 0x84b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		spu_secure_shared_memory_mem: spu-secure-shared-memory@85300000 {
+			reg = <0x0 0x85300000 0x0 0x80000>;
+			no-map;
+		};
+
+		adsp_boot_dtb_mem: adsp-boot-dtb@866c0000 {
+			reg = <0x0 0x866c0000 0x0 0x40000>;
+			no-map;
+		};
+
+		spss_region_mem: spss-region@86700000 {
+			reg = <0x0 0x86700000 0x0 0x400000>;
+			no-map;
+		};
+
+		adsp_boot_mem: adsp-boot@86b00000 {
+			reg = <0x0 0x86b00000 0x0 0xc00000>;
+			no-map;
+		};
+
+		video_mem: video@87700000 {
+			reg = <0x0 0x87700000 0x0 0x700000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@87e00000 {
+			reg = <0x0 0x87e00000 0x0 0x3a00000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0x80000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@8b900000 {
+			reg = <0x0 0x8b900000 0x0 0x2000000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@8d900000 {
+			reg = <0x0 0x8d900000 0x0 0x80000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8d9fe000 {
+			reg = <0x0 0x8d9fe000 0x0 0x2000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8da00000 {
+			reg = <0x0 0x8da00000 0x0 0x700000>;
+			no-map;
+		};
+
+		camera_mem: camera@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x800000>;
+			no-map;
+		};
+
+		av1_encoder_mem: av1-encoder@8e900000 {
+			reg = <0x0 0x8e900000 0x0 0x700000>;
+			no-map;
+		};
+
+		reserved-region@8f000000 {
+			reg = <0x0 0x8f000000 0x0 0xa00000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@8fa00000 {
+			reg = <0x0 0x8fa00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		q6_wpss_dtb_mem: q6-wpss-dtb@91300000 {
+			reg = <0x0 0x91300000 0x0 0x80000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc@d8000000 {
+			reg = <0x0 0xd8000000 0x0 0x40000>;
+			no-map;
+		};
+
+		reserved-region@d8040000 {
+			reg = <0x0 0xd8040000 0x0 0xa0000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@d80e0000 {
+			reg = <0x0 0xd80e0000 0x0 0x520000>;
+			no-map;
+		};
+
+		ta_mem: ta@d8600000 {
+			reg = <0x0 0xd8600000 0x0 0x8a00000>;
+			no-map;
+		};
+
+		tags_mem1: tags@e1000000 {
+			reg = <0x0 0xe1000000 0x0 0x26a0000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0x0 0xff800000 0x0 0x600000>;
+			no-map;
+		};
+
+		smem_mem: smem@ffe00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0xffe00000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,x1e80100-gcc";
+			reg = <0 0x00100000 0 0x200000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c16: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c16_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi16: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c17: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c17_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi17: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c18: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c18_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi18: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c19: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c19_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi19: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c20: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c20_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi20: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c21: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c21_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi21: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart21: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart21_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			i2c22: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c22_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi22: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c23: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c23_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi23: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 777 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 779 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x136 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x123 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma0: dma-controller@b00000  {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00b00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x456 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_0: geniqup@bc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00bc0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x443 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@b80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0xb80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@b80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@b84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@b84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@b88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi2: spi@b88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0xb88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@b8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@b8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@b90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0xb90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@b90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@b94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@b94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@b98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@b98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@b9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi7: spi@b9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,x1e80100-cnoc-main";
+			reg = <0 0x1500000 0 0x14400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,x1e80100-cnoc-cfg";
+			reg = <0 0x1600000 0 0x6600>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,x1e80100-system-noc";
+			reg = <0 0x1680000 0 0x1c080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_south_anoc: interconnect@16c0000 {
+			compatible = "qcom,x1e80100-pcie-south-anoc";
+			reg = <0 0x16c0000 0 0xd080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_center_anoc: interconnect@16d0000 {
+			compatible = "qcom,x1e80100-pcie-center-anoc";
+			reg = <0 0x16d0000 0 0x7000>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,x1e80100-aggre1-noc";
+			reg = <0 0x16E0000 0 0x14400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,x1e80100-aggre2-noc";
+			reg = <0 0x1700000 0 0x1c400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_north_anoc: interconnect@1740000 {
+			compatible = "qcom,x1e80100-pcie-north-anoc";
+			reg = <0 0x1740000 0 0x9080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_center_anoc: interconnect@1750000 {
+			compatible = "qcom,x1e80100-usb-center-anoc";
+			reg = <0 0x1750000 0 0x8800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_north_anoc: interconnect@1760000 {
+			compatible = "qcom,x1e80100-usb-north-anoc";
+			reg = <0 0x1760000 0 0x7080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_south_anoc: interconnect@1770000 {
+			compatible = "qcom,x1e80100-usb-south-anoc";
+			reg = <0 0x1770000 0 0xf080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,x1e80100-mmss-noc";
+			reg = <0 0x1780000 0 0x5B800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		gem_noc: interconnect@26400000 {
+			compatible = "qcom,x1e80100-gem-noc";
+			reg = <0 0x26400000 0 0x311200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,x1e80100-nsp-noc";
+			reg = <0 0x320C0000 0 0xE080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,x1e80100-lpass-ag-noc";
+			reg = <0 0x7e40000 0 0xE080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,x1e80100-lpass-lpiaon-noc";
+			reg = <0 0x7400000 0 0x19080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpicx_noc: interconnect@7430000 {
+			compatible = "qcom,x1e80100-lpass-lpicx-noc";
+			reg = <0 0x7430000 0 0x3A200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,x1e80100-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+			qcom,pdc-ranges = <0 480 42>, <42 251 5>,
+					  <47 522 52>, <99 609 32>,
+					  <131 717 12>, <143 816 19>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,x1e80100-tlmm";
+			reg = <0 0x0f100000 0 0xf00000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 239>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup0_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup0_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup0_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio12", "gpio13";
+				function = "qup0_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup0_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup0_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio24", "gpio25";
+				function = "qup0_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio14", "gpio15";
+				function = "qup0_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio54", "gpio55";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c16_data_clk: qup-i2c16-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "qup2_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c17_data_clk: qup-i2c17-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c18_data_clk: qup-i2c18-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio73";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c19_data_clk: qup-i2c19-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio76", "gpio77";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c20_data_clk: qup-i2c20-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c21_data_clk: qup-i2c21-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio84", "gpio85";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c22_data_clk: qup-i2c22-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio88", "gpio89";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c23_data_clk: qup-i2c23-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio86", "gpio87";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio3";
+				function = "qup0_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup0_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio7";
+				function = "qup0_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup0_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio11";
+				function = "qup0_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup0_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio15";
+				function = "qup0_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup0_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio19";
+				function = "qup0_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup0_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio23";
+				function = "qup0_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup0_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio27";
+				function = "qup0_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup0_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio13";
+				function = "qup0_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio14", "gpio15", "gpio12";
+				function = "qup0_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio35";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio43";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio47";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio51";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio59";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio53";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio54", "gpio55", "gpio52";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi16_cs: qup-spi16-cs-state {
+				pins = "gpio67";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio64", "gpio65", "gpio66";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi17_cs: qup-spi17-cs-state {
+				pins = "gpio71";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi17_data_clk: qup-spi17-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio68", "gpio69", "gpio70";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi18_cs: qup-spi18-cs-state {
+				pins = "gpio75";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi18_data_clk: qup-spi18-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio72", "gpio73", "gpio74";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_cs: qup-spi19-cs-state {
+				pins = "gpio79";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_data_clk: qup-spi19-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio76", "gpio77", "gpio78";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi20_cs: qup-spi20-cs-state {
+				pins = "gpio83";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi20_data_clk: qup-spi20-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio80", "gpio81", "gpio82";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi21_cs: qup-spi21-cs-state {
+				pins = "gpio87";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi21_data_clk: qup-spi21-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio84", "gpio85", "gpio86";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi22_cs: qup-spi22-cs-state {
+				pins = "gpio91";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi22_data_clk: qup-spi22-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio88", "gpio89", "gpio90";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi23_cs: qup-spi23-cs-state {
+				pins = "gpio85";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi23_data_clk: qup-spi23-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio86", "gpio87", "gpio84";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart21_default: qup-uart21-default-state {
+				/* TX, RX */
+				pins = "gpio86", "gpio87";
+				function = "qup2_se5";
+				drive-strength= <2>;
+				bias-disable;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,x1e80100-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+		};
+
+		intc: interrupt-controller@17000000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17000000 0 0x10000>,     /* GICD */
+			      <0 0x17080000 0 0x480000>;    /* GICR * 12 */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17040000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17040000 0 0x40000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17500000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17500000 0 0x10000>,
+			      <0 0x17510000 0 0x10000>,
+			      <0 0x17520000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			qcom,drv-count = <3>;
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,x1e80100-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,x1e80100-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		timer@17800000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17800000 0 0x1000>;
+
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0 0x20000000>;
+
+			frame@17801000 {
+				reg = <0 0x17801000 0x1000>,
+				      <0 0x17802000 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <0>;
+			};
+
+			frame@17803000 {
+				reg = <0 0x17803000 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@17805000 {
+				reg = <0 0x17805000 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@17807000 {
+				reg = <0 0x17807000 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@17809000 {
+				reg = <0 0x17809000 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1780b000 {
+				reg = <0 0x1780b000 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1780d000 {
+				reg = <0 0x1780d000 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,x1e80100-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>,
+			      <0 0x25a00000 0 0x200000>,
+			      <0 0x25c00000 0 0x200000>,
+			      <0 0x25e00000 0 0x200000>,
+			      <0 0x26000000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc4_base",
+				    "llcc5_base",
+				    "llcc6_base",
+				    "llcc7_base",
+				    "llcc_broadcast_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi
index ef3bb835d5c0..6f133f54ded5 100644
--- a/arch/arm64/boot/dts/renesas/draak.dtsi
+++ b/arch/arm64/boot/dts/renesas/draak.dtsi
@@ -356,12 +356,9 @@
 				 * CVBS and HDMI inputs through SW[49-53]
 				 * switches.
 				 *
-				 * CVBS is the default selection, link it to
-				 * VIN4 here.
+				 * HDMI is the default selection, leave CVBS
+				 * not connected here.
 				 */
-				adv7180_out: endpoint {
-					remote-endpoint = <&vin4_in>;
-				};
 			};
 		};
 
@@ -374,6 +371,12 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -423,13 +426,11 @@
 				 * CVBS and HDMI inputs through SW[49-53]
 				 * switches.
 				 *
-				 * CVBS is the default selection, leave HDMI
-				 * not connected here.
+				 * HDMI is the default selection, link it to
+				 * VIN4 here.
 				 */
 				adv7612_out: endpoint {
-					pclk-sample = <0>;
-					hsync-active = <0>;
-					vsync-active = <0>;
+					remote-endpoint = <&vin4_in>;
 				};
 			};
 		};
@@ -580,8 +581,8 @@
 		function = "usb0";
 	};
 
-	vin4_pins_cvbs: vin4 {
-		groups = "vin4_data8", "vin4_sync", "vin4_clk";
+	vin4_pins: vin4 {
+		groups = "vin4_data24", "vin4_sync", "vin4_clk";
 		function = "vin4";
 	};
 };
@@ -729,7 +730,7 @@
 };
 
 &vin4 {
-	pinctrl-0 = <&vin4_pins_cvbs>;
+	pinctrl-0 = <&vin4_pins>;
 	pinctrl-names = "default";
 
 	status = "okay";
@@ -737,7 +738,10 @@
 	ports {
 		port {
 			vin4_in: endpoint {
-				remote-endpoint = <&adv7180_out>;
+				pclk-sample = <0>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				remote-endpoint = <&adv7612_out>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi
index f1a5778ef115..cba2fde9dd36 100644
--- a/arch/arm64/boot/dts/renesas/ebisu.dtsi
+++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi
@@ -403,6 +403,12 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 405404c0843d..0608dce92e40 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -29,6 +29,15 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	d1p8: regulator-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3p3: regulator-fixed {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -166,6 +175,12 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 
+		avdd-supply = <&d1p8>;
+		dvdd-supply = <&d1p8>;
+		pvdd-supply = <&d1p8>;
+		dvdd-3v-supply = <&d3p3>;
+		bgvdd-supply = <&d1p8>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
index bb4a5270f71b..913f70fe6c5c 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
@@ -187,6 +187,9 @@
 };
 
 &hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
index 6c7b29b69d0e..5facfad96158 100644
--- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
@@ -96,6 +96,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			interrupt-parent = <&irqc>;
 			gpio-ranges = <&pinctrl 0 0 152>;
 			clocks = <&cpg CPG_MOD R9A08G045_GPIO_HCLK>;
 			power-domains = <&cpg>;
@@ -104,6 +105,73 @@
 				 <&cpg R9A08G045_GPIO_SPARE_RESETN>;
 		};
 
+		irqc: interrupt-controller@11050000 {
+			compatible = "renesas,r9a08g045-irqc", "renesas,rzg2l-irqc";
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0x11050000 0 0x10000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nmi",
+					  "irq0", "irq1", "irq2", "irq3",
+					  "irq4", "irq5", "irq6", "irq7",
+					  "tint0", "tint1", "tint2", "tint3",
+					  "tint4", "tint5", "tint6", "tint7",
+					  "tint8", "tint9", "tint10", "tint11",
+					  "tint12", "tint13", "tint14", "tint15",
+					  "tint16", "tint17", "tint18", "tint19",
+					  "tint20", "tint21", "tint22", "tint23",
+					  "tint24", "tint25", "tint26", "tint27",
+					  "tint28", "tint29", "tint30", "tint31",
+					  "bus-err";
+			clocks = <&cpg CPG_MOD R9A08G045_IA55_CLK>,
+				 <&cpg CPG_MOD R9A08G045_IA55_PCLK>;
+			clock-names = "clk", "pclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A08G045_IA55_RESETN>;
+		};
+
 		sdhi0: mmc@11c00000  {
 			compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi";
 			reg = <0x0 0x11c00000 0 0x10000>;
@@ -149,6 +217,44 @@
 			status = "disabled";
 		};
 
+		eth0: ethernet@11c30000 {
+			compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+			reg = <0 0x11c30000 0 0x10000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
+				 <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@11c40000 {
+			compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+			reg = <0 0x11c40000 0 0x10000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A08G045_ETH1_CLK_AXI>,
+				 <&cpg CPG_MOD R9A08G045_ETH1_CLK_CHI>,
+				 <&cpg CPG_MOD R9A08G045_ETH1_REFCLK>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A08G045_ETH1_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@12400000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
index 33f2ecf42441..50ed66d42a24 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
@@ -163,7 +163,7 @@
 		};
 
 		avb: ethernet@a3300000 {
-			compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m";
+			compatible = "renesas,etheravb-r9a09g011", "renesas,etheravb-rzv2m";
 			reg = <0 0xa3300000 0 0x800>;
 			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, /* ch0: Rx0 BE */
 				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, /* ch1: Rx1 NC */
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index 547859c388ce..4409c47239b9 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -312,6 +312,7 @@
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
index 56ff92453976..5e4209d6fb42 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -241,6 +241,7 @@
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
index a199de8f8b02..f062d4ad78b7 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
@@ -9,18 +9,36 @@
 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
 
 /*
- * Signals of SW_CONFIG switches:
- * @SW_SD0_DEV_SEL:
- *	0 - SD0 is connected to eMMC
- *	1 - SD0 is connected to uSD0 card
+ * On-board switches' states:
+ * @SW_OFF: switch's state is OFF
+ * @SW_ON:  switch's state is ON
  */
-#define SW_SD0_DEV_SEL	1
+#define SW_OFF		0
+#define SW_ON		1
+
+/*
+ * SW_CONFIG[x] switches' states:
+ * @SW_CONFIG2:
+ *	SW_OFF - SD0 is connected to eMMC
+ *	SW_ON  - SD0 is connected to uSD0 card
+ * @SW_CONFIG3:
+ *	SW_OFF - SD2 is connected to SoC
+ *	SW_ON  - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
+ */
+#define SW_CONFIG2	SW_ON
+#define SW_CONFIG3	SW_ON
 
 / {
 	compatible = "renesas,rzg3s-smarcm", "renesas,r9a08g045s33", "renesas,r9a08g045";
 
 	aliases {
 		mmc0 = &sdhi0;
+#if SW_CONFIG3 == SW_OFF
+		mmc2 = &sdhi2;
+#else
+		eth0 = &eth0;
+		eth1 = &eth1;
+#endif
 	};
 
 	chosen {
@@ -43,7 +61,7 @@
 		enable-active-high;
 	};
 
-#if SW_SD0_DEV_SEL
+#if SW_CONFIG2 == SW_ON
 	vccq_sdhi0: regulator1 {
 		compatible = "regulator-gpio";
 		regulator-name = "SDHI0 VccQ";
@@ -63,13 +81,76 @@
 		regulator-always-on;
 	};
 #endif
+
+	vcc_sdhi2: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(8, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+#if SW_CONFIG3 == SW_ON
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@7 {
+		reg = <7>;
+		interrupt-parent = <&pinctrl>;
+		interrupts = <RZG2L_GPIO(12, 0) IRQ_TYPE_EDGE_FALLING>;
+		rxc-skew-psec = <0>;
+		txc-skew-psec = <0>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&eth1 {
+	pinctrl-0 = <&eth1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy1: ethernet-phy@7 {
+		reg = <7>;
+		interrupt-parent = <&pinctrl>;
+		interrupts = <RZG2L_GPIO(12, 1) IRQ_TYPE_EDGE_FALLING>;
+		rxc-skew-psec = <0>;
+		txc-skew-psec = <0>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
 };
+#endif
 
 &extal_clk {
 	clock-frequency = <24000000>;
 };
 
-#if SW_SD0_DEV_SEL
+#if SW_CONFIG2 == SW_ON
 /* SD0 slot */
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
@@ -100,7 +181,100 @@
 };
 #endif
 
+#if SW_CONFIG3 == SW_OFF
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_sdhi2>;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	status = "okay";
+};
+#endif
+
 &pinctrl {
+	eth0-phy-irq-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(12, 0) GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "eth0-phy-irq";
+	};
+
+	eth0_pins: eth0 {
+		txc {
+			pinmux = <RZG2L_PORT_PINMUX(1, 0, 1)>;  /* ET0_TXC */
+			power-source = <1800>;
+			output-enable;
+			input-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		tx_ctl {
+			pinmux = <RZG2L_PORT_PINMUX(1, 1, 1)>;  /* ET0_TX_CTL */
+			power-source = <1800>;
+			output-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		mux {
+			pinmux = <RZG2L_PORT_PINMUX(1, 2, 1)>,	/* ET0_TXD0 */
+				 <RZG2L_PORT_PINMUX(1, 3, 1)>,	/* ET0_TXD1 */
+				 <RZG2L_PORT_PINMUX(1, 4, 1)>,	/* ET0_TXD2 */
+				 <RZG2L_PORT_PINMUX(2, 0, 1)>,	/* ET0_TXD3 */
+				 <RZG2L_PORT_PINMUX(3, 0, 1)>,	/* ET0_RXC */
+				 <RZG2L_PORT_PINMUX(3, 1, 1)>,	/* ET0_RX_CTL */
+				 <RZG2L_PORT_PINMUX(3, 2, 1)>,	/* ET0_RXD0 */
+				 <RZG2L_PORT_PINMUX(3, 3, 1)>,	/* ET0_RXD1 */
+				 <RZG2L_PORT_PINMUX(4, 0, 1)>,	/* ET0_RXD2 */
+				 <RZG2L_PORT_PINMUX(4, 1, 1)>,	/* ET0_RXD3 */
+				 <RZG2L_PORT_PINMUX(4, 3, 1)>,	/* ET0_MDC */
+				 <RZG2L_PORT_PINMUX(4, 4, 1)>,	/* ET0_MDIO */
+				 <RZG2L_PORT_PINMUX(4, 5, 1)>;	/* ET0_LINKSTA */
+			power-source = <1800>;
+		};
+	};
+
+	eth1-phy-irq-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(12, 1) GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "eth1-phy-irq";
+	};
+
+	eth1_pins: eth1 {
+		txc {
+			pinmux = <RZG2L_PORT_PINMUX(7, 0, 1)>;	/* ET1_TXC */
+			power-source = <1800>;
+			output-enable;
+			input-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		tx_ctl {
+			pinmux = <RZG2L_PORT_PINMUX(7, 1, 1)>;	/* ET1_TX_CTL */
+			power-source = <1800>;
+			output-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		mux {
+			pinmux = <RZG2L_PORT_PINMUX(7, 2, 1)>,	/* ET1_TXD0 */
+				 <RZG2L_PORT_PINMUX(7, 3, 1)>,	/* ET1_TXD1 */
+				 <RZG2L_PORT_PINMUX(7, 4, 1)>,	/* ET1_TXD2 */
+				 <RZG2L_PORT_PINMUX(8, 0, 1)>,	/* ET1_TXD3 */
+				 <RZG2L_PORT_PINMUX(8, 4, 1)>,	/* ET1_RXC */
+				 <RZG2L_PORT_PINMUX(9, 0, 1)>,	/* ET1_RX_CTL */
+				 <RZG2L_PORT_PINMUX(9, 1, 1)>,	/* ET1_RXD0 */
+				 <RZG2L_PORT_PINMUX(9, 2, 1)>,	/* ET1_RXD1 */
+				 <RZG2L_PORT_PINMUX(9, 3, 1)>,	/* ET1_RXD2 */
+				 <RZG2L_PORT_PINMUX(10, 0, 1)>,	/* ET1_RXD3 */
+				 <RZG2L_PORT_PINMUX(10, 2, 1)>,	/* ET1_MDC */
+				 <RZG2L_PORT_PINMUX(10, 3, 1)>,	/* ET1_MDIO */
+				 <RZG2L_PORT_PINMUX(10, 4, 1)>;	/* ET1_LINKSTA */
+			power-source = <1800>;
+		};
+	};
+
 	sdhi0_pins: sd0 {
 		data {
 			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
@@ -139,4 +313,26 @@
 		       "SD0_CLK", "SD0_CMD", "SD0_RST#";
 		power-source = <1800>;
 	};
+
+	sdhi2_pins: sd2 {
+		data {
+			pins = "P11_2", "P11_3", "P12_0", "P12_1";
+			input-enable;
+		};
+
+		ctrl {
+			pins = "P11_1";
+			input-enable;
+		};
+
+		mux {
+			pinmux = <RZG2L_PORT_PINMUX(11, 0, 8)>, /* SD2_CLK */
+				 <RZG2L_PORT_PINMUX(11, 1, 8)>, /* SD2_CMD */
+				 <RZG2L_PORT_PINMUX(11, 2, 8)>, /* SD2_DATA0 */
+				 <RZG2L_PORT_PINMUX(11, 3, 8)>, /* SD2_DATA1 */
+				 <RZG2L_PORT_PINMUX(12, 0, 8)>, /* SD2_DATA2 */
+				 <RZG2L_PORT_PINMUX(12, 1, 8)>, /* SD2_DATA3 */
+				 <RZG2L_PORT_PINMUX(14, 1, 7)>; /* SD2_CD# */
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
index e7073a09ed2e..214520137230 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
@@ -11,6 +11,26 @@
 / {
 	aliases {
 		serial0 = &scif0;
+		mmc1 = &sdhi1;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(2, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(4, 2) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
 	};
 };
 
@@ -19,6 +39,38 @@
 		pinmux = <RZG2L_PORT_PINMUX(6, 3, 1)>, /* RXD */
 			 <RZG2L_PORT_PINMUX(6, 4, 1)>; /* TXD */
 	};
+
+	sdhi1_pins: sd1 {
+		data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <3300>;
+		};
+
+		ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <3300>;
+		};
+
+		cd {
+			pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+		};
+	};
+
+	sdhi1_pins_uhs: sd1-uhs {
+		data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <1800>;
+		};
+
+		ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <1800>;
+		};
+
+		cd {
+			pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+		};
+	};
 };
 
 &scif0 {
@@ -26,3 +78,16 @@
 	pinctrl-0 = <&scif0_pins>;
 	status = "okay";
 };
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <125000000>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 3885ef3454ff..50de17e4fb3f 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -234,6 +234,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 
@@ -294,6 +295,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
 	};
@@ -314,6 +316,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 	};
@@ -324,6 +327,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index a18f33bf0c0e..a7b30e11beaf 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
@@ -78,6 +79,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-x55.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
@@ -98,14 +101,17 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
index 3429e124d95a..5b4e22385165 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
@@ -7,6 +7,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc1 = &sdmmc;
 		mmc2 = &sdio;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index c1bbd555f5f5..0a90a88fc664 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -14,6 +14,7 @@
 	compatible = "rockchip,px30-evb", "rockchip,px30";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdio;
 		mmc2 = &emmc;
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
index 7d4c5324c61b..16798eb77077 100644
--- a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
@@ -13,6 +13,7 @@
 	compatible = "tsd,px30-ringneck-haikou", "rockchip,px30";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc2 = &sdmmc;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 42ce78beb413..9137dd76e72c 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -20,7 +20,6 @@
 	#size-cells = <2>;
 
 	aliases {
-		ethernet0 = &gmac;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -632,6 +631,7 @@
 		clock-names = "spiclk", "apb_pclk";
 		dmas = <&dmac 12>, <&dmac 13>;
 		dma-names = "tx", "rx";
+		num-cs = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
 		#address-cells = <1>;
@@ -647,6 +647,7 @@
 		clock-names = "spiclk", "apb_pclk";
 		dmas = <&dmac 14>, <&dmac 15>;
 		dma-names = "tx", "rx";
+		num-cs = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
index e9810d2f0407..b47fe02c33fb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
@@ -143,6 +143,68 @@
 	status = "okay";
 };
 
+&gpio0 {
+	gpio-line-names =
+		/* GPIO0_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_B0 - B7 */
+		"", "", "", "header1-pin3 [GPIO0_B3]",
+		"header1-pin5 [GPIO0_B4]", "", "",
+		"header1-pin11 [GPIO0_B7]",
+		/* GPIO0_C0 - C7 */
+		"header1-pin13 [GPIO0_C0]",
+		"header1-pin15 [GPIO0_C1]", "", "", "",
+		"", "", "",
+		/* GPIO0_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* GPIO1_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_C0 - C7 */
+		"", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
+		"header1-pin19 [GPIO1_C7]",
+		/* GPIO1_D0 - D7 */
+		"header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]",
+		"", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* GPIO2_A0 - A7 */
+		"header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]",
+		"", "",
+		"header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
+		"header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
+		/* GPIO2_B0 - B7 */
+		"header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
+		"header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
+		"header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
+		"header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
+		/* GPIO2_C0 - C7 */
+		"header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
+		/* GPIO2_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* GPIO3_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_B0 - B7 */
+		"", "", "header2-pin42 [GPIO3_B2]",
+		"header2-pin41 [GPIO3_B3]", "header2-pin40 [GPIO3_B4]",
+		"header2-pin39 [GPIO3_B5]", "", "",
+		/* GPIO3_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index 2ae4bb7d5e62..cfc0a87b5195 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -20,6 +20,11 @@
 	#size-cells = <2>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
index 1deef53a4c94..c7b1862fca6a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
@@ -9,6 +9,7 @@
 	compatible = "zkmagic,a95x-z2", "rockchip,rk3318";
 
 	aliases {
+		ethernet0 = &gmac2phy;
 		mmc0 = &sdmmc;
 		mmc1 = &sdio;
 		mmc2 = &emmc;
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
index ce318e05f0a6..f4d20f29c1b4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
@@ -6,30 +6,16 @@
  */
 
 /dts-v1/;
-#include "rk3326-odroid-go.dtsi"
+#include "rk3326-anbernic-rg351m.dtsi"
 
 / {
 	model = "Anbernic RG351M";
 	compatible = "anbernic,rg351m", "rockchip,rk3326";
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm0 0 1000000 0>;
-		pwm-names = "enable";
-	};
 };
 
-/delete-node/ &builtin_gamepad;
-/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
-
 &internal_display {
 	compatible = "elida,kd35t133";
 	iovcc-supply = <&vcc_lcd>;
+	rotation = <270>;
 	vdd-supply = <&vcc_lcd>;
 };
-
-&pwm0 {
-	status = "okay";
-};
-
-/delete-node/ &rk817_charger;
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi
new file mode 100644
index 000000000000..b6d041dbed94
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi
@@ -0,0 +1,478 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	/*
+	 * LED is a tri-state. Driven high it is red, driven low it is
+	 * green, and not driven at all (pin set to input) it is amber.
+	 * Additionally, there is a 2nd LED that is not controllable
+	 * that is on (red) when plugged in to power.
+	 */
+	gpio_led: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin>;
+
+		red_green_led: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CHARGING;
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_int";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm0 0 1000000 0>;
+		pwm-names = "enable";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	internal_display: panel@0 {
+		reg = <0>;
+		backlight = <&backlight>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clocks = <&cru SCLK_I2S1_OUT>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <0>;
+		wakeup-source;
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+		vcc8-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1150000>;
+				regulator-min-microvolt = <950000>;
+				regulator-name = "vdd_logic";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1350000>;
+				regulator-min-microvolt = <950000>;
+				regulator-name = "vdd_arm";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_3v3";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <1000000>;
+				regulator-name = "vdd_1v0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vccio_sd";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_sd";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_bl";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-max-microvolt = <2800000>;
+				regulator-min-microvolt = <2800000>;
+				regulator-name = "vcc_lcd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc_wifi: LDO_REG9 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_wifi";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			usb_midu: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <5400000>;
+				regulator-min-microvolt = <5000000>;
+				regulator-name = "usb_midu";
+			};
+		};
+
+		rk817_codec: codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	#address-cells = <1>;
+	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+	pinctrl-names = "default";
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		led_pin: led-pin {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts
new file mode 100644
index 000000000000..c79f7a7b38cb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3326-anbernic-rg351m.dtsi"
+
+/ {
+	model = "Anbernic RG351V";
+	compatible = "anbernic,rg351v", "rockchip,rk3326";
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-vol-down {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-vol-up {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&internal_display {
+	compatible = "anbernic,rg351v-panel", "newvision,nv3051d";
+	vdd-supply = <&vcc_lcd>;
+};
+
+&io_domains {
+	vccio1-supply = <&vccio_sd>;
+};
+
+&vcc_sd {
+	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <1800000>;
+};
+
+&vccio_sd {
+	regulator-max-microvolt = <1800000>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index 40bf808642b9..824183e515da 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -9,6 +9,7 @@
 	compatible = "azw,beelink-a1", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index ff6b466e0e07..1eef5504445f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -11,6 +11,7 @@
 	compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2phy;
 		mmc0 = &sdmmc;
 		mmc1 = &sdio;
 		mmc2 = &emmc;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index 1445b879ac7a..a4399da7d8b1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -14,6 +14,7 @@
 	compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		ethernet1 = &rtl8153;
 		mmc0 = &sdmmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
index 5d7d567283e5..4237f2ee8fee 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
@@ -26,9 +26,11 @@
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 
+			motorcomm,auto-sleep-disabled;
 			motorcomm,clk-out-frequency-hz = <125000000>;
 			motorcomm,keep-pll-enabled;
-			motorcomm,auto-sleep-disabled;
+			motorcomm,rx-clk-drv-microamp = <5020>;
+			motorcomm,rx-data-drv-microamp = <5020>;
 
 			pinctrl-0 = <&eth_phy_reset_pin>;
 			pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
index dc83d74045a3..f20662929c77 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
@@ -15,6 +15,7 @@
 	compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		ethernet1 = &rtl8153;
 		mmc0 = &sdmmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 5d5d9574088c..414897a57e75 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -11,6 +11,7 @@
 	compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
index 018a3a5075c7..3cda6c627b68 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -21,6 +21,8 @@
 	compatible = "radxa,rockpi-e", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
+		ethernet1 = &gmac2phy;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
@@ -180,6 +182,59 @@
 	status = "okay";
 };
 
+&gpio0 {
+	gpio-line-names =
+		/* GPIO0_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_D0 - D7 */
+		"", "", "", "pin-15 [GPIO0_D3]", "", "", "", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* GPIO1_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_D0 - D7 */
+		"", "", "", "", "pin-07 [GPIO1_D4]", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* GPIO2_A0 - A7 */
+		"pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]",
+		"pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]",
+		"pin-33 [GPIO2_A6]", "",
+		/* GPIO2_B0 - B7 */
+		"", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]",
+		/* GPIO2_C0 - C7 */
+		"pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]",
+		"pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]",
+		"pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]",
+		/* GPIO2_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* GPIO3_A0 - A7 */
+		"pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]",
+		"", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "",
+		/* GPIO3_B0 - B7 */
+		"pin-24 [GPIO3_B0]", "", "", "", "", "", "", "",
+		/* GPIO3_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c1 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 0a27fa5271f5..229fe9da9c2d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -11,6 +11,7 @@
 	compatible = "pine64,rock64", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index cc8209795c3e..7b4c15c4a9c3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -20,6 +20,10 @@
 	#size-cells = <2>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -27,8 +31,6 @@
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
 		i2c3 = &i2c3;
-		ethernet0 = &gmac2io;
-		ethernet1 = &gmac2phy;
 	};
 
 	cpus {
@@ -486,7 +488,6 @@
 	pwm3: pwm@ff1b0030 {
 		compatible = "rockchip,rk3328-pwm";
 		reg = <0x0 0xff1b0030 0x0 0x10>;
-		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -916,6 +917,8 @@
 		resets = <&cru SRST_GMAC2IO_A>;
 		reset-names = "stmmaceth";
 		rockchip,grf = <&grf>;
+		tx-fifo-depth = <2048>;
+		rx-fifo-depth = <4096>;
 		snps,txpbl = <0x4>;
 		status = "disabled";
 	};
@@ -938,6 +941,8 @@
 		reset-names = "stmmaceth";
 		phy-mode = "rmii";
 		phy-handle = <&phy>;
+		tx-fifo-depth = <2048>;
+		rx-fifo-depth = <4096>;
 		snps,txpbl = <0x4>;
 		clock_in_out = "output";
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index e47d1398aeca..b48b98c13705 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -9,6 +9,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &emmc;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
index be06e6e64d18..029b8e22e709 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -12,6 +12,7 @@
 	compatible = "geekbuying,geekbox", "rockchip,rk3368";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &emmc;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
index 5753e57fd716..8ac8acf4082d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -8,6 +8,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &emmc;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index 81d1064fdb21..dcee2e28916f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -12,6 +12,7 @@
 	compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 5589f3db6b36..b16b7ca02379 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -12,6 +12,7 @@
 	compatible = "rockchip,r88", "rockchip,rk3368";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &emmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index a4c5aaf1f457..62af0cb94839 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -19,7 +19,10 @@
 	#size-cells = <2>;
 
 	aliases {
-		ethernet0 = &gmac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
index 6464ef4d113d..173da81fc231 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
@@ -15,6 +15,7 @@
 	compatible = "openailab,eaidk-610", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 3d1e126b553f..55eca7a50a1f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -12,6 +12,7 @@
 	compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
index 1ce85a5816e4..30e4879f322c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
@@ -13,6 +13,10 @@
 	model = "96boards RK3399 Ficus";
 	compatible = "vamrs,ficus", "rockchip,rk3399";
 
+	aliases {
+		ethernet0 = &gmac;
+	};
+
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index c5db64f3e124..260415d99aeb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -16,6 +16,7 @@
 	compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
index 0f9cc042d9bf..1cba1d857c96 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
@@ -70,7 +70,7 @@
 &spi0 {
 	status = "okay";
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupt-parent = <&gpio0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index c5e7de60c121..5846a11f0e84 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -706,7 +706,7 @@ camera: &i2c7 {
 &spi2 {
 	status = "okay";
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index 7af27e8216f1..4a6ab6c2e24c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -11,6 +11,7 @@
 	compatible = "hugsun,x99", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
index 8302e51def52..99ac4ed0f13f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
@@ -10,6 +10,10 @@
 / {
 	model = "Khadas Edge-Captain";
 	compatible = "khadas,edge-captain", "rockchip,rk3399";
+
+	aliases {
+		ethernet0 = &gmac;
+	};
 };
 
 &gmac {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
index f5dcb99dc349..e12e7b4d64ca 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
@@ -10,6 +10,10 @@
 / {
 	model = "Khadas Edge-V";
 	compatible = "khadas,edge-v", "rockchip,rk3399";
+
+	aliases {
+		ethernet0 = &gmac;
+	};
 };
 
 &gmac {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
index 1eb287a3f8c0..9e3aec4440bd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
@@ -19,6 +19,7 @@
 	compatible = "kobol,helios64", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdhci;
 		spi1 = &spi1;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
index a21ac319f809..cb69e2145fa9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
@@ -15,6 +15,7 @@
 	compatible = "leez,p710", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 7c5f441a2219..b7f1e47978a6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -18,6 +18,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index dba4d03bfc2b..e7551449e718 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -17,6 +17,7 @@
 	compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 115c14c0a3c6..18a98c4648ea 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "rk3399-puma.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Theobroma Systems RK3399-Q7 SoM";
@@ -18,6 +19,38 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&haikou_keys_pin>;
+		pinctrl-names = "default";
+
+		button-batlow-n {
+			gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+			label = "BATLOW#";
+			linux,code = <KEY_BATTERY>;
+		};
+
+		button-slp-btn-n {
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
+			label = "SLP_BTN#";
+			linux,code = <KEY_SLEEP>;
+		};
+
+		button-wake-n {
+			gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
+			label = "WAKE#";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+
+		switch-lid-btn-n {
+			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "LID_BTN#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
 	leds {
 		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
 
@@ -165,11 +198,8 @@
 };
 
 &pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&haikou_pin_hog>;
-
-	hog {
-		haikou_pin_hog: haikou-pin-hog {
+	buttons {
+		haikou_keys_pin: haikou-keys-pin {
 			rockchip,pins =
 			  /* LID_BTN */
 			  <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
@@ -177,7 +207,7 @@
 			  <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
 			  /* SLP_BTN# */
 			  <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
-			  /* BIOS_DISABLE# */
+			  /* WAKE# */
 			  <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 20e3f41efe97..c08e69391c01 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -9,6 +9,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 	};
 
@@ -119,6 +120,20 @@
 	drive-impedance-ohm = <33>;
 };
 
+&gpio0 {
+	/*
+	 * The BIOS_DISABLE hog is a feedback pin for the actual status of the
+	 * signal. This usually represents the state of a switch on the baseboard.
+	 * The pin has a 10k pull-up resistor connected, so no pull-up setting is needed.
+	 */
+	bios-disable-hog {
+		gpios = <RK_PB0 GPIO_ACTIVE_HIGH>;
+		gpio-hog;
+		input;
+		line-name = "bios_disable";
+	};
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
 	assigned-clock-parents = <&clkin_gmac>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index c32913df93c3..ca7a446b6568 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -14,6 +14,7 @@
 	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdhci;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
index 8bfd5f88d1ef..7baf9d1b22fd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
@@ -15,6 +15,7 @@
 	compatible = "radxa,rock-4c-plus", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index f2279aa6ca9e..281a12180703 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -12,6 +12,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index bca2b50e0a93..f30b82a10ca3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -11,6 +11,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index e6ac292ce645..b3ef1c85e754 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -12,6 +12,7 @@
 	compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdhci;
 	};
@@ -44,7 +45,7 @@
 	fan0: gpio-fan {
 		#cooling-cells = <2>;
 		compatible = "gpio-fan";
-		gpio-fan,speed-map = <0 0 3000 1>;
+		gpio-fan,speed-map = <0 0>, <3000 1>;
 		gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index da0dfb237f85..6e12c5a920ca 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -19,7 +19,11 @@
 	#size-cells = <2>;
 
 	aliases {
-		ethernet0 = &gmac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -2114,6 +2118,7 @@
 		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&cru ACLK_GPU>;
 		#cooling-cells = <2>;
+		dynamic-power-coefficient = <2640>;
 		power-domains = <&power RK3399_PD_GPU>;
 		status = "disabled";
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 8b8992a8e9c0..8823c924dc1d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -13,6 +13,7 @@
 	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
index 1c6d83b47cd2..6ecdf5d28339 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
@@ -455,7 +455,7 @@
 &pinctrl {
 	leds {
 		sys_led_pin: sys-status-led-pin {
-			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
index 1ead3c5c24b3..0ac64f043b80 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
@@ -5,67 +5,11 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/pinctrl/rockchip.h>
-#include "rk3566-anbernic-rg353x.dtsi"
+#include "rk3566-powkiddy-rk2023.dtsi"
 
 / {
 	model = "RGB30";
 	compatible = "powkiddy,rgb30", "rockchip,rk3566";
-
-	aliases {
-		mmc1 = &sdmmc0;
-		mmc2 = &sdmmc1;
-		mmc3 = &sdmmc2;
-	};
-
-	battery: battery {
-		compatible = "simple-battery";
-		charge-full-design-microamp-hours = <3151000>;
-		charge-term-current-microamp = <300000>;
-		constant-charge-current-max-microamp = <2000000>;
-		constant-charge-voltage-max-microvolt = <4250000>;
-		factory-internal-resistance-micro-ohms = <117000>;
-		voltage-max-design-microvolt = <4172000>;
-		voltage-min-design-microvolt = <3400000>;
-
-		ocv-capacity-celsius = <20>;
-		ocv-capacity-table-0 =  <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
-					<3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
-					<3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
-					<3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
-					<3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
-					<3400000 0>;
-	};
-
-	/*
-	 * Channels reversed for speakers. Headphones automatically switch via hardware when
-	 * detected with no ability to control output in software. Headphones appear to be mono
-	 * (each output channel receives all audio). No microphone support on 3.5mm jack.
-	 */
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "rk817_ext";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,widgets =
-			"Headphone", "Headphones";
-		simple-audio-card,routing =
-			"Headphones", "HPOL",
-			"Headphones", "HPOR";
-
-		simple-audio-card,codec {
-			sound-dai = <&rk817>;
-		};
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s1_8ch>;
-		};
-	};
-};
-
-/delete-node/ &adc_keys;
-
-&chosen {
-	/delete-property/ stdout-path;
 };
 
 &cru {
@@ -75,87 +19,21 @@
 			       <200000000>, <292500000>;
 };
 
-&gpio_keys_control {
-	button-r1 {
-		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
-		label = "TR";
-		linux,code = <BTN_TR>;
-	};
-
-	button-r2 {
-		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
-		label = "TR2";
-		linux,code = <BTN_TR2>;
-	};
-};
-
-/delete-node/ &{/i2c@fdd40000/regulator@40};
-
-&i2c0 {
-	vdd_cpu: regulator@1c {
-		compatible = "tcs,tcs4525";
-		reg = <0x1c>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1390000>;
-		regulator-name = "vdd_cpu";
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc_sys>;
-		regulator-state-mem {
-			regulator-off-in-suspend;
+&dsi0 {
+	panel: panel@0 {
+		compatible = "powkiddy,rgb30-panel";
+		reg = <0>;
+		backlight = <&backlight>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vcc3v3_lcd0_n>;
+		iovcc-supply = <&vcc3v3_lcd0_n>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
 		};
 	};
 };
-
-/*
- * Device has 2 red LEDs instead of an amber and a red. Relabel LEDs as
- * red_led0 and red_led1.
- */
-/delete-node/ &{/pwm-leds/led-1};
-/delete-node/ &{/pwm-leds/led-2};
-
-&leds {
-	red_led0: led-1 {
-		color = <LED_COLOR_ID_RED>;
-		function = LED_FUNCTION_CHARGING;
-		max-brightness = <255>;
-		pwms = <&pwm7 0 25000 0>;
-	};
-
-	red_led1: led-2 {
-		color = <LED_COLOR_ID_RED>;
-		default-state = "off";
-		function = LED_FUNCTION_STATUS;
-		max-brightness = <255>;
-		pwms = <&pwm0 0 25000 0>;
-	};
-};
-
-&panel {
-	compatible = "powkiddy,rgb30-panel";
-	vcc-supply = <&vcc3v3_lcd0_n>;
-	iovcc-supply = <&vcc3v3_lcd0_n>;
-	/delete-property/ vdd-supply;
-};
-
-&pwm5 {
-	status = "disabled";
-};
-
-&rk817 {
-	rk817_charger: charger {
-		monitored-battery = <&battery>;
-		rockchip,resistor-sense-micro-ohms = <10000>;
-		rockchip,sleep-enter-current-microamp = <300000>;
-		rockchip,sleep-filter-current-microamp = <100000>;
-	};
-};
-
-/* There is no UART header visible on the board for this device. */
-&uart2 {
-	status = "disabled";
-};
-
-/delete-node/ &vibrator;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
new file mode 100644
index 000000000000..ba32d0793dca
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-powkiddy-rk2023.dtsi"
+
+/ {
+	model = "RK2023";
+	compatible = "powkiddy,rk2023", "rockchip,rk3566";
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			  <200000000>, <115200000>;
+};
+
+&dsi0 {
+	panel: panel@0 {
+		compatible = "powkiddy,rk2023-panel", "newvision,nv3051d";
+		reg = <0>;
+		backlight = <&backlight>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc3v3_lcd0_n>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi
new file mode 100644
index 000000000000..0fa8f06f94cd
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi
@@ -0,0 +1,875 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	aliases {
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+		mmc3 = &sdmmc2;
+	};
+
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&adc_mux 0>,
+			      <&adc_mux 1>,
+			      <&adc_mux 2>,
+			      <&adc_mux 3>;
+		pinctrl-0 = <&joy_mux_en>;
+		pinctrl-names = "default";
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	adc_mux: adc-mux {
+		compatible = "io-channel-mux";
+		channels = "left_x", "right_x", "left_y", "right_y";
+		#io-channel-cells = <1>;
+		io-channels = <&saradc 3>;
+		io-channel-names = "parent";
+		mux-controls = <&gpio_mux>;
+		settle-time-us = <100>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3151000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4250000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
+					<3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
+					<3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
+					<3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
+					<3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
+					<3400000 0>;
+	};
+
+	gpio_keys_control: gpio-keys-control {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&btn_pins_ctrl>;
+		pinctrl-names = "default";
+
+		button-a {
+			gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+			label = "EAST";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-r1 {
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+			label = "TR";
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "TR2";
+			linux,code = <BTN_TR2>;
+		};
+
+		button-right {
+			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-thumbl {
+			gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "THUMBL";
+			linux,code = <BTN_THUMBL>;
+		};
+
+		button-thumbr {
+			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "THUMBR";
+			linux,code = <BTN_THUMBR>;
+		};
+
+		button-up {
+			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+			label = "WEST";
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-vol-down {
+			gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-vol-up {
+			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio_mux: mux-controller {
+		compatible = "gpio-mux";
+		mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+			    <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+		#mux-control-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c5>;
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	/*
+	 * Device also includes an always on LED that is wired to the 5V input
+	 * voltage and is on when the device is plugged in.
+	 */
+	leds: pwm-leds {
+		compatible = "pwm-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <255>;
+			pwms = <&pwm6 0 25000 0>;
+		};
+
+		red_led: led-1 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_CHARGING;
+			max-brightness = <255>;
+			pwms = <&pwm7 0 25000 0>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+	};
+
+	/*
+	 * Channels reversed for speakers. Headphones automatically switch via hardware when
+	 * detected with no ability to control output in software. Headphones appear to be mono
+	 * (each output channel receives all audio). No microphone support on 3.5mm jack.
+	 */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphones";
+		simple-audio-card,routing =
+			"Headphones", "HPOL",
+			"Headphones", "HPOR";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&vcc_lcd_h>;
+		pinctrl-names = "default";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_lcd0_n";
+		vin-supply = <&vcc_3v3>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc_sys";
+	};
+
+	vcc_wifi: regulator-vcc-wifi {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_wifi_h>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_wifi";
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-0 = <&hdmitxm0_cec>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <4700000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		rk817_charger: charger {
+			monitored-battery = <&battery>;
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <300000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+	};
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx
+		     &i2s1m0_lrcktx
+		     &i2s1m0_sdi0
+		     &i2s1m0_sdo0>;
+	pinctrl-names = "default";
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-btns {
+		btn_pins_ctrl: btn-pins-ctrl {
+			rockchip,pins =
+				<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins =
+				<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	joy-mux {
+		joy_mux_en: joy-mux-en {
+			rockchip,pins =
+				<0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc3v3-lcd {
+		vcc_lcd_h: vcc-lcd-h {
+			rockchip,pins =
+				<0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc-wifi {
+		vcc_wifi_h: vcc-wifi-h {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc1v8_dvp>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	vqmmc-supply = <&vcca1v8_pmu>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usb_host0_xhci {
+	dr_mode = "peripheral";
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	phy-names = "usb2-phy", "usb3-phy";
+	phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
new file mode 100644
index 000000000000..4786b19fd017
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
@@ -0,0 +1,926 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Powkiddy x55";
+	compatible = "powkiddy,x55", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc2;
+		mmc3 = &sdmmc1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc_joystick: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 0>, <&saradc 1>,
+			      <&saradc 2>, <&saradc 3>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <4000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4300000>;
+		factory-internal-resistance-micro-ohms = <91000>;
+		voltage-max-design-microvolt = <4138000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4138000 100>, <4083000 95>, <4059000 90>, <4044000 85>,
+					<4030000 80>, <4020000 75>, <4006000 70>, <3972000 65>,
+					<3934000 60>, <3904000 55>, <3878000 50>, <3857000 45>,
+					<3843000 40>, <3826000 35>, <3801000 30>, <3768000 25>,
+					<3735000 20>, <3688000 15>, <3621000 10>, <3553000 5>,
+					<3400000 0>;
+	};
+
+	gpio_keys_control: gpio-keys-control {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&btn_pins_ctrl>;
+		pinctrl-names = "default";
+
+		button-a {
+			gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
+			label = "EAST";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-right {
+			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-thumbl {
+			gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "THUMBL";
+			linux,code = <BTN_THUMBL>;
+		};
+
+		button-thumbr {
+			gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "THUMBR";
+			linux,code = <BTN_THUMBR>;
+		};
+
+		button-r1 {
+			gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
+			label = "TR";
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
+			label = "TR2";
+			linux,code = <BTN_TR2>;
+		};
+
+		button-up {
+			gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+			label = "WEST";
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-voldown {
+			gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		red_led: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		green_led: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+		};
+
+		amber_led: led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CHARGING;
+		};
+
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c5>;
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-0 = <&hp_det>;
+		pinctrl-names = "default";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_host_en>;
+		pinctrl-names = "default";
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&dcdc_boost>;
+	};
+
+	vcc_lcd: regulator-vcc-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_lcd_en>;
+		pinctrl-names = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_lcd";
+	};
+
+	vcc_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc_sys";
+	};
+
+	vcc_wifi: regulator-vcc-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&vcc_wifi_h>;
+		pinctrl-names = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_wifi";
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <126400000>;
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel: panel@0 {
+		compatible = "powkiddy,x55-panel", "himax,hx8394";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		vcc-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-0 = <&hdmitxm0_cec>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-min-microvolt = <4700000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		rk817_charger: charger {
+			monitored-battery = <&battery>;
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <150000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+
+	};
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx>, <&i2s1m0_lrcktx>, <&i2s1m0_sdi0>,
+		    <&i2s1m0_sdo0>;
+	pinctrl-names = "default";
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-control {
+		btn_pins_ctrl: btn-pins-ctrl {
+			rockchip,pins =
+				<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins =
+				<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-leds {
+		led_pins: led-pins {
+			rockchip,pins =
+				<4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hp-detect {
+		hp_det: hp-det {
+			rockchip,pins =
+				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins =
+				<4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vcc-lcd {
+		vcc_lcd_en: vcc-lcd-en {
+			rockchip,pins =
+				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc-wifi {
+		vcc_wifi_h: vcc-wifi-h {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcca1v8_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcca1v8_pmu>;
+	vccio5-supply = <&vcc2v8_dvp>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
+		    <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>, <&sdmmc0_cmd>,
+		    <&sdmmc0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_cmd>, <&sdmmc1_clk>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc2m1_bus4>, <&sdmmc2m1_cmd>, <&sdmmc2m1_clk>,
+		    <&sdmmc2m1_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc2v8_dvp>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m0_xfer>, <&uart1m0_ctsn>, <&uart1m0_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index 854d02b46e6f..59843a7a199c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -31,8 +31,9 @@
 	fan: gpio_fan {
 		compatible = "gpio-fan";
 		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0    0
-				      4500 1>;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<4500 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&fan_en_h>;
 		#cooling-cells = <2>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
index 1b1c67d5b1ef..3ae24e39450a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
@@ -14,6 +14,7 @@
 	compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc1 = &sdmmc0;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index 938092fce186..63eea27293fe 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -12,6 +12,7 @@
 	compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdmmc0;
 		mmc1 = &sdhci;
 		mmc2 = &sdmmc1;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
index 4e49bebf548b..fdbf1c783242 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
@@ -13,6 +13,10 @@
 	model = "PINE64 RK3566 SOQuartz on Blade carrier board";
 	compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
 
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
 	/* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */
 	vcc3v0_sd: vcc3v0-sd-regulator {
 		compatible = "regulator-fixed";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
index cddf6cd2fecb..6ed3fa4aee34 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
@@ -8,6 +8,10 @@
 	model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
 	compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
 
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
 	/* labeled +12v in schematic */
 	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
index 2208dbfb7f0a..f2095dfa4eaf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
@@ -8,6 +8,10 @@
 	model = "PINE64 RK3566 SOQuartz on Model A carrier board";
 	compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
 
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
 	/* labeled DCIN_12V in schematic */
 	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
index 63bae36b8f7e..bfb7b952f4c5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
@@ -12,7 +12,6 @@
 	compatible = "pine64,soquartz", "rockchip,rk3566";
 
 	aliases {
-		ethernet0 = &gmac1;
 		mmc0 = &sdmmc0;
 		mmc1 = &sdhci;
 		mmc2 = &sdmmc1;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
new file mode 100644
index 000000000000..a4946cdc3bb3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "rk3588-coolpi-cm5.dtsi"
+
+/ {
+	model = "RK3588 CoolPi CM5 EVB";
+	compatible = "coolpi,pi-cm5-evb", "coolpi,pi-cm5", "rockchip,rk3588";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		power-supply = <&vcc12v_dcin>;
+		pwms = <&pwm2 0 25000 0>;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_lcd: vcc3v3-lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lcd";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcdpwr_en>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_usb_host1: vcc5v0_usb_host2: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_pwren>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+/* M.2 E-Key */
+&pcie2x1l1 {
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+/* Standard pcie */
+&pcie3x2 {
+	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+/* M.2 M-Key ssd */
+&pcie3x4 {
+	num-lanes = <2>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&pinctrl {
+	lcd {
+		lcdpwr_en: lcdpwr-en {
+			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bl_en: bl-en {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		usb_otg_pwren: usb-otg-pwren {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		bt_pwron: bt-pwron {
+			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_clkreq: pcie-clkreq {
+			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_rst: pcie-rst {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wifi_pwron: wifi-pwron {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_wake: pcie-wake {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_usb_host1>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_usb_host2>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi
new file mode 100644
index 000000000000..cce1c8e83587
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi
@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+	compatible = "coolpi,pi-cm5", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+		serial2 = &uart2;
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_8ch_p0>;
+		label = "rk3588-es8316";
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v85_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&vdd_0v85_s0>;
+	};
+
+	avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd1v8_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	avdd0v75_pcie30: avdd0v75-pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v75_pcie30";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <750000>;
+		regulator-max-microvolt = <750000>;
+		vin-supply = <&avdd_0v75_s0>;
+	};
+
+	pcie30_avdd1v8: avdd1v8-pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	pinctrl-names = "default";
+	rx_delay = <0x00>;
+	tx_delay = <0x43>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@1 {
+		/* YT8531C/H */
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&yt8531_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* ethernet */
+&pcie2x1l2 {
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&yt6801_isolate>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	yt6801 {
+		yt6801_isolate: yt6801-isolate {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	yt8531 {
+		yt8531_rst: yt8531-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_2v0_pldo_s3>;
+		vcc14-supply = <&vcc_2v0_pldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
index b51543892078..be6a4f4f90f6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
@@ -12,10 +12,6 @@
 	compatible = "edgeble,neural-compute-module-6a-io",
 		     "edgeble,neural-compute-module-6a", "rockchip,rk3588";
 
-	aliases {
-		serial2 = &uart2;
-	};
-
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
index 9933765e4097..070baeb63431 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
@@ -9,13 +9,9 @@
 
 / {
 	model = "Edgeble Neu6B IO Board";
-	compatible = "edgeble,neural-compute-module-6b-io",
+	compatible = "edgeble,neural-compute-module-6a-io",
 		     "edgeble,neural-compute-module-6b", "rockchip,rk3588";
 
-	aliases {
-		serial2 = &uart2;
-	};
-
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
index b9d789d57862..de30c2632b8e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -16,8 +16,8 @@
 	compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
 
 	aliases {
+		ethernet0 = &gmac0;
 		mmc0 = &sdhci;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -56,6 +56,63 @@
 		};
 	};
 
+	analog-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+		simple-audio-card,name = "RK3588 EVB1 Audio";
+		simple-audio-card,aux-devs = <&amp_headphone>, <&amp_speaker>;
+		simple-audio-card,bitclock-master = <&masterdai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&masterdai>;
+		simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,pin-switches = "Headphones", "Speaker";
+		simple-audio-card,routing =
+			"Speaker Amplifier INL", "LOUT2",
+			"Speaker Amplifier INR", "ROUT2",
+			"Speaker", "Speaker Amplifier OUTL",
+			"Speaker", "Speaker Amplifier OUTR",
+			"Headphones Amplifier INL", "LOUT1",
+			"Headphones Amplifier INR", "ROUT1",
+			"Headphones", "Headphones Amplifier OUTL",
+			"Headphones", "Headphones Amplifier OUTR",
+			"LINPUT1", "Onboard Microphone",
+			"RINPUT1", "Onboard Microphone",
+			"LINPUT2", "Microphone Jack",
+			"RINPUT2", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Microphone", "Onboard Microphone",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+
+		masterdai: simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+
+	amp_headphone: headphone-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&headphone_amplifier_en>;
+		sound-name-prefix = "Headphones Amplifier";
+	};
+
+	amp_speaker: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_amplifier_en>;
+		sound-name-prefix = "Speaker Amplifier";
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		power-supply = <&vcc12v_dcin>;
@@ -240,6 +297,32 @@
 	};
 };
 
+&i2c7 {
+	status = "okay";
+
+	es8388: audio-codec@11 {
+		compatible = "everest,es8388";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		AVDD-supply = <&avcc_1v8_codec_s0>;
+		DVDD-supply = <&avcc_1v8_codec_s0>;
+		HPVDD-supply = <&vcc_3v3_s0>;
+		PVDD-supply = <&vcc_3v3_s0>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+};
+
 &mdio0 {
 	rgmii_phy: ethernet-phy@1 {
 		/* RTL8211F */
@@ -273,6 +356,20 @@
 };
 
 &pinctrl {
+	audio {
+		hp_detect: headphone-detect {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		headphone_amplifier_en: headphone-amplifier-en {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		speaker_amplifier_en: speaker-amplifier-en {
+			rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	rtl8111 {
 		rtl8111_isolate: rtl8111-isolate {
 			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -351,6 +448,7 @@
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		pinctrl-names = "default";
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
new file mode 100644
index 000000000000..39d65002add1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
@@ -0,0 +1,802 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3588-SBC Jaguar";
+	compatible = "tsd,rk3588-jaguar", "rockchip,rk3588";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		/* Can be controlled through SW2 but also GPIO1 on CP2102 on P20 */
+		button-bios-disable {
+			label = "BIOS_DISABLE";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	aliases {
+		ethernet0 = &gmac0;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		rtc0 = &rtc_twi;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	/* DCIN is 12-24V but standard is 12V */
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led1_pin>;
+
+		/* LED1 on PCB */
+		led-1 {
+			gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_AMBER>;
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v2_s3: vcc-1v2-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v2_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* Exposed on P14 and P15 */
+	vcc_2v8_s3: vcc-2v8-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_2v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_5v0_usb_a: vcc-5v0-usb-a-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_a_vcc";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+		gpio = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v0_usb_c1: vcc-5v0-usb-c1-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "5v_usbc1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v0_usb_c2: vcc-5v0-usb-c2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "5v_usbc2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+		gpio = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc3v3_mdot2: vcc3v3-mdot2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_mdot2";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_1v2_s3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_rx_bus2
+		     &gmac0_tx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus
+		     &eth0_pins
+		     &eth_reset>;
+	tx_delay = <0x10>;
+	rx_delay = <0x10>;
+	snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 100000>;
+
+	status = "okay";
+};
+
+&gpio1 {
+	mdot2e-w-disable1-n-hog {
+		gpios = <RK_PB1 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m.2 E-key W_DISABLE1#";
+		gpio-hog;
+	};
+};
+
+&gpio4 {
+	mdot2e-w-disable2-n-hog {
+		gpios = <RK_PC1 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m.2 E-key W_DISABLE2#";
+		gpio-hog;
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+	};
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rtc_twi: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1m4_xfer>;
+};
+
+&i2c6 {
+	pinctrl-0 = <&i2c6m4_xfer>;
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* SE050 Secure Element at 0x48; GPIO1_A4 for enable pin */
+
+	/* Also on 0x55 */
+	eeprom@54 {
+		compatible = "st,24c04", "atmel,24c04";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&vcc_3v3_s3>;
+	};
+};
+
+&i2c8 {
+	pinctrl-0 = <&i2c8m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@6 {
+		/* KSZ9031 or KSZ9131 */
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x6>;
+		clocks = <&cru REFCLKO25M_ETH0_OUT>;
+	};
+};
+
+&pcie2x1l0 {
+	reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; /* WIFI_PERST0# */
+	vpcie3v3-supply = <&vcc3v3_mdot2>;
+	status = "okay";
+};
+
+&pinctrl {
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ethernet {
+		eth_reset: eth-reset {
+			rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led1_pin: led1-pin {
+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
+	supports-cqe;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	broken-cd;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_cmd &sdmmc_clk>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-name = "vcca_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-name = "vdda_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-name = "vcca_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg3 {
+				regulator-name = "vdda_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-name = "vdda_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc_5v0_usb_a>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+/* Mule-ATtiny debug UART; typically baudrate 9600 */
+&uart0 {
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
+
+/* Main debug interface on P20 micro-USB B port and P21 header */
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* RS485 on P19 */
+&uart3 {
+	pinctrl-0 = <&uart3m2_xfer &uart3_rtsn>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* Mule-ATtiny UPDI flashing UART */
+&uart7 {
+	pinctrl-0 = <&uart7m0_xfer>;
+	status = "okay";
+};
+
+/* host0 on P10 USB-A */
+&usb_host0_ehci {
+	status = "okay";
+};
+
+/* host0 on P10 USB-A */
+&usb_host0_ohci {
+	status = "okay";
+};
+
+/* host1 on M.2 E-key */
+&usb_host1_ehci {
+	status = "okay";
+};
+
+/* host1 on M.2 E-key */
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
index 97af4f912828..997b516c2533 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
@@ -19,7 +19,6 @@
 	aliases {
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -190,19 +189,19 @@
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
 
-&cpu_b0{
+&cpu_b0 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
 
-&cpu_b1{
+&cpu_b1 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
 
-&cpu_b2{
+&cpu_b2 {
 	cpu-supply = <&vdd_cpu_big1_s0>;
 };
 
-&cpu_b3{
+&cpu_b3 {
 	cpu-supply = <&vdd_cpu_big1_s0>;
 };
 
@@ -537,13 +536,12 @@
 };
 
 &sdmmc {
-	max-frequency = <200000000>;
-	no-sdio;
-	no-mmc;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	disable-wp;
+	no-mmc;
+	no-sdio;
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vccio_sd_s0>;
@@ -570,6 +568,8 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 
+		system-power-controller;
+
 		vcc1-supply = <&vcc4v0_sys>;
 		vcc2-supply = <&vcc4v0_sys>;
 		vcc3-supply = <&vcc4v0_sys>;
@@ -590,7 +590,7 @@
 		#gpio-cells = <2>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
index 298c183d6f4f..3e660ff6cd5f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
@@ -19,7 +19,6 @@
 	aliases {
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	chosen {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
index 5c59f9571dce..87a0abf95f7d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
@@ -17,9 +17,9 @@
 	compatible = "pine64,quartzpro64", "rockchip,rk3588";
 
 	aliases {
+		ethernet0 = &gmac0;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	chosen {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 741f631db345..a0e303c3a1dc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -14,7 +14,6 @@
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 		mmc2 = &sdio;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -138,6 +137,10 @@
 	status = "okay";
 };
 
+&combphy2_psu {
+	status = "okay";
+};
+
 &cpu_b0 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
@@ -423,6 +426,8 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 
+		system-power-controller;
+
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
 		vcc3-supply = <&vcc5v0_sys>;
@@ -443,7 +448,7 @@
 		#gpio-cells = <2>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 
@@ -765,3 +770,7 @@
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&usb_host2_xhci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
index d88c0e852356..dc08da518a76 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
@@ -19,8 +19,6 @@
 	aliases {
 		ethernet0 = &gmac1;
 		mmc0 = &sdhci;
-		serial2 = &uart2;
-		serial9 = &uart9;
 	};
 
 	fan: pwm-fan {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
new file mode 100644
index 000000000000..e037bf9db75a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
@@ -0,0 +1,812 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ * https://cool-pi.com/topic/130/coolpi-4b-product-spec-introduction
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "RK3588S CoolPi 4 Model B";
+	compatible = "coolpi,pi-4b", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_8ch_p0>;
+		label = "rk3588-es8316";
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds>;
+
+		led0: led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-red {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usbdcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usbdcin>;
+	};
+
+	avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v85_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&vdd_0v85_s0>;
+	};
+
+	avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd1v8_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	vcc3v3_mipi: vcc3v3-mipi-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_mipi";
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_u3host_en>;
+		regulator-name = "vcc5v0_otg";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	pinctrl-0 = <&i2c6m3_xfer>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+	};
+};
+
+&i2c7 {
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtl8111_isolate>;
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	led {
+		gpio_leds: gpio-leds {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>,
+					<0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	rtl8111 {
+		rtl8111_isolate: rtl8111-isolate {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,
+					<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vcc5v0_u3host_en: vcc5v0-u3host-en {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wireless-bluetooth {
+		bt_reset_gpio: bt-reset-pin {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_gpio: bt-wake-pin {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host_irq: bt-wake-host-irq {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	wireless-wlan {
+		wifi_host_wake_irq: wifi-host-wake-irq {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		wifi_poweren_pin: wifi-poweren-pin {
+			rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	pinctrl-0 = <&pwm2m1_pins>;
+	status = "okay";
+};
+
+&pwm13 {
+	pinctrl-names = "active";
+	pinctrl-0 = <&pwm13m2_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <150000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-sd;
+	no-mmc;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdiom1_pins>,<&wifi_poweren_pin>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* bt */
+&uart9 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
index 60f00ceb630e..3c2278886851 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
@@ -44,7 +44,6 @@
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 		mmc2 = &sdio;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -196,13 +195,13 @@
 
 &gpio1 {
 	gpio-line-names = /* GPIO1 A0-A7 */
-			  "HEADER_27_3v3", "HEADER_28_3v3", "", "",
+			  "HEADER_27_3v3", "", "", "",
 			  "HEADER_29_1v8", "", "HEADER_7_1v8", "",
 			  /* GPIO1 B0-B7 */
 			  "", "HEADER_31_1v8", "HEADER_33_1v8", "",
 			  "HEADER_11_1v8", "HEADER_13_1v8", "", "",
 			  /* GPIO1 C0-C7 */
-			  "", "", "", "",
+			  "", "HEADER_28_3v3", "", "",
 			  "", "", "", "",
 			  /* GPIO1 D0-D7 */
 			  "", "", "", "",
@@ -226,11 +225,11 @@
 
 &gpio4 {
 	gpio-line-names = /* GPIO4 A0-A7 */
-			  "", "", "HEADER_37_3v3", "HEADER_32_3v3",
-			  "HEADER_36_3v3", "", "HEADER_35_3v3", "HEADER_38_3v3",
+			  "", "", "HEADER_37_3v3", "HEADER_8_3v3",
+			  "HEADER_10_3v3", "", "HEADER_32_3v3", "HEADER_35_3v3",
 			  /* GPIO4 B0-B7 */
 			  "", "", "", "HEADER_40_3v3",
-			  "HEADER_8_3v3", "HEADER_10_3v3", "", "",
+			  "HEADER_38_3v3", "HEADER_36_3v3", "", "",
 			  /* GPIO4 C0-C7 */
 			  "", "", "", "",
 			  "", "", "", "",
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index 82478a452533..f53e993c785e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -12,7 +12,6 @@
 
 	aliases {
 		mmc0 = &sdhci;
-		serial2 = &uart2;
 	};
 
 	chosen {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
index e3a839a12dc6..25de4362af38 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
@@ -13,8 +13,8 @@
 	compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -314,6 +314,7 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 				<&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
@@ -660,3 +661,7 @@
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&usb_host2_xhci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
index 8347adcbd003..2002fd0221fa 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -12,9 +12,9 @@
 	compatible = "radxa,rock-5a", "rockchip,rk3588s";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	analog-sound {
@@ -114,6 +114,10 @@
 	};
 };
 
+&combphy2_psu {
+	status = "okay";
+};
+
 &cpu_b0 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
@@ -734,3 +738,7 @@
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&usb_host2_xhci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 8aa0499f9b03..36b1b7acfe6a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -18,6 +18,38 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial7 = &uart7;
+		serial8 = &uart8;
+		serial9 = &uart9;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -362,6 +394,11 @@
 		#clock-cells = <0>;
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
@@ -474,6 +511,16 @@
 		reg = <0x0 0xfd58c000 0x0 0x1000>;
 	};
 
+	vop_grf: syscon@fd5a4000 {
+		compatible = "rockchip,rk3588-vop-grf", "syscon";
+		reg = <0x0 0xfd5a4000 0x0 0x2000>;
+	};
+
+	vo1_grf: syscon@fd5a8000 {
+		compatible = "rockchip,rk3588-vo-grf", "syscon";
+		reg = <0x0 0xfd5a8000 0x0 0x100>;
+	};
+
 	php_grf: syscon@fd5b0000 {
 		compatible = "rockchip,rk3588-php-grf", "syscon";
 		reg = <0x0 0xfd5b0000 0x0 0x1000>;
@@ -593,6 +640,74 @@
 		status = "disabled";
 	};
 
+	vop: vop@fdd90000 {
+		compatible = "rockchip,rk3588-vop";
+		reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
+		reg-names = "vop", "gamma-lut";
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP>,
+			 <&cru HCLK_VOP>,
+			 <&cru DCLK_VOP0>,
+			 <&cru DCLK_VOP1>,
+			 <&cru DCLK_VOP2>,
+			 <&cru DCLK_VOP3>,
+			 <&cru PCLK_VOP_ROOT>;
+		clock-names = "aclk",
+			      "hclk",
+			      "dclk_vp0",
+			      "dclk_vp1",
+			      "dclk_vp2",
+			      "dclk_vp3",
+			      "pclk_vop";
+		iommus = <&vop_mmu>;
+		power-domains = <&power RK3588_PD_VOP>;
+		rockchip,grf = <&sys_grf>;
+		rockchip,vop-grf = <&vop_grf>;
+		rockchip,vo1-grf = <&vo1_grf>;
+		rockchip,pmu = <&pmu>;
+		status = "disabled";
+
+		vop_out: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vp0: port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+			};
+
+			vp1: port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+			};
+
+			vp2: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+			};
+
+			vp3: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@fdd97e00 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_VOP>;
+		status = "disabled";
+	};
+
 	uart0: serial@fd890000 {
 		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
 		reg = <0x0 0xfd890000 0x0 0x100>;
@@ -916,6 +1031,7 @@
 				reg = <RK3588_PD_USB>;
 				clocks = <&cru PCLK_PHP_ROOT>,
 					 <&cru ACLK_USB_ROOT>,
+					 <&cru ACLK_USB>,
 					 <&cru HCLK_USB_ROOT>,
 					 <&cru HCLK_HOST0>,
 					 <&cru HCLK_HOST_ARB0>,
diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
index 97522fb0bf66..3ce81ad7116f 100644
--- a/arch/arm64/boot/dts/sprd/Makefile
+++ b/arch/arm64/boot/dts/sprd/Makefile
@@ -2,4 +2,5 @@
 dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
 			sp9860g-1h10.dtb	\
 			sp9863a-1h10.dtb	\
-			ums512-1h10.dtb
+			ums512-1h10.dtb		\
+			ums9620-2h10.dtb
diff --git a/arch/arm64/boot/dts/sprd/ums512.dtsi b/arch/arm64/boot/dts/sprd/ums512.dtsi
index 024be594c47d..dbdb79f8e959 100644
--- a/arch/arm64/boot/dts/sprd/ums512.dtsi
+++ b/arch/arm64/boot/dts/sprd/ums512.dtsi
@@ -96,7 +96,7 @@
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a55";
+			compatible = "arm,cortex-a75";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
 			cpu-idle-states = <&CORE_PD>;
@@ -104,7 +104,7 @@
 
 		CPU7: cpu@700 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a55";
+			compatible = "arm,cortex-a75";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
 			cpu-idle-states = <&CORE_PD>;
@@ -113,7 +113,7 @@
 
 	idle-states {
 		entry-method = "psci";
-		CORE_PD: core-pd {
+		CORE_PD: cpu-pd {
 			compatible = "arm,idle-state";
 			entry-latency-us = <4000>;
 			exit-latency-us = <4000>;
@@ -291,6 +291,7 @@
 			pll2: clock-controller@0 {
 				compatible = "sprd,ums512-gc-pll";
 				reg = <0x0 0x100>;
+				clocks = <&ext_26m>;
 				clock-names = "ext-26m";
 				#clock-cells = <1>;
 			};
@@ -682,8 +683,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f040000 0 0x1000>;
 			cpu = <&CPU0>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -699,8 +700,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f140000 0 0x1000>;
 			cpu = <&CPU1>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -716,8 +717,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f240000 0 0x1000>;
 			cpu = <&CPU2>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -733,8 +734,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f340000 0 0x1000>;
 			cpu = <&CPU3>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -750,8 +751,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f440000 0 0x1000>;
 			cpu = <&CPU4>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -767,8 +768,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f540000 0 0x1000>;
 			cpu = <&CPU5>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -784,8 +785,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f640000 0 0x1000>;
 			cpu = <&CPU6>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -801,8 +802,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f740000 0 0x1000>;
 			cpu = <&CPU7>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
diff --git a/arch/arm64/boot/dts/sprd/ums9620-2h10.dts b/arch/arm64/boot/dts/sprd/ums9620-2h10.dts
new file mode 100644
index 000000000000..b35671192a72
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/ums9620-2h10.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS9620-2h10 board DTS file
+ *
+ * Copyright (C) 2023, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "ums9620.dtsi"
+
+/ {
+	model = "Unisoc UMS9620-2H10 Board";
+
+	compatible = "sprd,ums9620-2h10", "sprd,ums9620";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/sprd/ums9620.dtsi b/arch/arm64/boot/dts/sprd/ums9620.dtsi
new file mode 100644
index 000000000000..2191f0a4811b
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/ums9620.dtsi
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS9620 DTS file
+ *
+ * Copyright (C) 2023, Unisoc Inc.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+		LIT_CORE_PD: cpu-pd-lit {
+			compatible = "arm,idle-state";
+			entry-latency-us = <1000>;
+			exit-latency-us = <500>;
+			min-residency-us = <2500>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+
+		BIG_CORE_PD: cpu-pd-big {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gic: interrupt-controller@12000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x12000000 0 0x20000>,	/* GICD */
+			      <0x0 0x12040000 0 0x100000>;	/* GICR */
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apb@20200000 {
+			compatible = "simple-bus";
+			ranges = <0 0 0x20200000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uart0: serial@0 {
+				compatible = "sprd,ums9620-uart",
+					     "sprd,sc9836-uart";
+				reg = <0 0x100>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@10000 {
+				compatible = "sprd,ums9620-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x10000 0x100>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ext_26m: clk-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_4m: clk-4m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <4000000>;
+		clock-output-names = "ext-4m";
+	};
+
+	ext_32k: clk-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	rco_100m: clk-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "rco-100m";
+	};
+
+	dphy_312m5: dphy-312m5 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <312500000>;
+		clock-output-names = "dphy-312m5";
+	};
+
+	dphy_416m7: dphy-416m7 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <416700000>;
+		clock-output-names = "dphy-416m7";
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 124403f5f1f4..96859d098ef8 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -140,6 +140,22 @@
 			};
 		};
 
+		bsec: efuse@44000000 {
+			compatible = "st,stm32mp25-bsec";
+			reg = <0x44000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			part_number_otp@24 {
+				reg = <0x24 0x4>;
+			};
+
+			package_otp@1e8 {
+				reg = <0x1e8 0x1>;
+				bits = <0 3>;
+			};
+		};
+
 		syscfg: syscon@44230000 {
 			compatible = "st,stm32mp25-syscfg", "syscon";
 			reg = <0x44230000 0x10000>;
diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
index bb50a9f7db4a..aaffb50b8b60 100644
--- a/arch/arm64/boot/dts/tesla/fsd.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -342,6 +342,18 @@
 		#clock-cells = <0>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		mfc_left: region@84000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0 0x84000000 0 0x8000000>;
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -581,7 +593,7 @@
 		};
 
 		serial_0: serial@14180000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "tesla,fsd-uart", "samsung,exynos4210-uart";
 			reg = <0x0 0x14180000 0x0 0x100>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 1>, <&pdma1 0>;
@@ -593,7 +605,7 @@
 		};
 
 		serial_1: serial@14190000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "tesla,fsd-uart", "samsung,exynos4210-uart";
 			reg = <0x0 0x14190000 0x0 0x100>;
 			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 3>, <&pdma1 2>;
@@ -605,12 +617,12 @@
 		};
 
 		pmu_system_controller: system-controller@11400000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "tesla,fsd-pmu", "samsung,exynos7-pmu", "syscon";
 			reg = <0x0 0x11400000 0x0 0x5000>;
 		};
 
 		watchdog_0: watchdog@100a0000 {
-			compatible = "samsung,exynos7-wdt";
+			compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
 			reg = <0x0 0x100a0000 0x0 0x100>;
 			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -619,7 +631,7 @@
 		};
 
 		watchdog_1: watchdog@100b0000 {
-			compatible = "samsung,exynos7-wdt";
+			compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
 			reg = <0x0 0x100b0000 0x0 0x100>;
 			interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -628,7 +640,7 @@
 		};
 
 		watchdog_2: watchdog@100c0000 {
-			compatible = "samsung,exynos7-wdt";
+			compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
 			reg = <0x0 0x100c0000 0x0 0x100>;
 			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -637,7 +649,7 @@
 		};
 
 		pwm_0: pwm@14100000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "tesla,fsd-pwm", "samsung,exynos4210-pwm";
 			reg = <0x0 0x14100000 0x0 0x100>;
 			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
 			#pwm-cells = <3>;
@@ -647,7 +659,7 @@
 		};
 
 		pwm_1: pwm@14110000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "tesla,fsd-pwm", "samsung,exynos4210-pwm";
 			reg = <0x0 0x14110000 0x0 0x100>;
 			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
 			#pwm-cells = <3>;
@@ -657,7 +669,7 @@
 		};
 
 		hsi2c_0: i2c@14200000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14200000 0x0 0x1000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -670,7 +682,7 @@
 		};
 
 		hsi2c_1: i2c@14210000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14210000 0x0 0x1000>;
 			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -683,7 +695,7 @@
 		};
 
 		hsi2c_2: i2c@14220000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14220000 0x0 0x1000>;
 			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -696,7 +708,7 @@
 		};
 
 		hsi2c_3: i2c@14230000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14230000 0x0 0x1000>;
 			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -709,7 +721,7 @@
 		};
 
 		hsi2c_4: i2c@14240000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14240000 0x0 0x1000>;
 			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -722,7 +734,7 @@
 		};
 
 		hsi2c_5: i2c@14250000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14250000 0x0 0x1000>;
 			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -735,7 +747,7 @@
 		};
 
 		hsi2c_6: i2c@14260000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14260000 0x0 0x1000>;
 			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -748,7 +760,7 @@
 		};
 
 		hsi2c_7: i2c@14270000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14270000 0x0 0x1000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -956,6 +968,15 @@
 			clock-names = "fin_pll", "mct";
 		};
 
+		mfc: mfc@12880000 {
+			compatible = "tesla,fsd-mfc";
+			reg = <0x0 0x12880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "mfc";
+			clocks = <&clock_mfc MFC_MFC_IPCLKPORT_ACLK>;
+			memory-region = <&mfc_left>;
+		};
+
 		ufs: ufs@15120000 {
 			compatible = "tesla,fsd-ufs";
 			reg = <0x0 0x15120000 0x0 0x200>,  /* 0: HCI standard */
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 77a347f9f47d..52c1dc910308 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -9,20 +9,20 @@
 # alphabetically.
 
 # Boards with AM62x SoC
-k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
-k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-ov5640.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
-dtb-$(CONFIG_ARCH_K3) += k3-am625-sk-hdmi-audio.dtb
-dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-hdmi-audio.dtb
 
 # Boards with AM62Ax SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
@@ -30,19 +30,19 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
 # Boards with AM62Px SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
 
+# Common overlays for SK-AM62* family of boards
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-ov5640.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-tevi-ov5640.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-imx219.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo
+
 # Boards with AM64x SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
-
-k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
-	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
-k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
-	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
-
-dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb
-dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
 
 # Boards with AM65x SoC
 k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
@@ -67,6 +67,7 @@ k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-e
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
 
 # Boards with J721s2 SoC
@@ -75,14 +76,59 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo
 k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo
 
 # Boards with J784s4 SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb
 
+# Build time test only, enabled by CONFIG_OF_ALL_DTBS
+k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
+	k3-am625-beagleplay-csi2-ov5640.dtbo
+k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \
+	k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
+k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \
+	k3-am62x-sk-csi2-imx219.dtbo
+k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \
+	k3-am62x-sk-csi2-ov5640.dtbo
+k3-am625-sk-csi2-tevi-ov5640-dtbs := k3-am625-sk.dtb \
+	k3-am62x-sk-csi2-tevi-ov5640.dtbo
+k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am62a7-sk-csi2-imx219-dtbs := k3-am62a7-sk.dtb \
+	k3-am62x-sk-csi2-imx219.dtbo
+k3-am62a7-sk-csi2-ov5640-dtbs := k3-am62a7-sk.dtb \
+	k3-am62x-sk-csi2-ov5640.dtbo
+k3-am62a7-sk-csi2-tevi-ov5640-dtbs := k3-am62a7-sk.dtb \
+	k3-am62x-sk-csi2-tevi-ov5640.dtbo
+k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
+	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
+k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
+	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
+k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \
+	k3-j721e-evm-pcie0-ep.dtbo
+k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
+	k3-j721s2-evm-pcie1-ep.dtbo
+dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
+	k3-am625-beagleplay-csi2-tevi-ov5640.dtb \
+	k3-am625-sk-csi2-imx219.dtb \
+	k3-am625-sk-csi2-ov5640.dtb \
+	k3-am625-sk-csi2-tevi-ov5640.dtb \
+	k3-am625-sk-hdmi-audio.dtb \
+	k3-am62-lp-sk-hdmi-audio.dtb \
+	k3-am62a7-sk-csi2-imx219.dtb \
+	k3-am62a7-sk-csi2-ov5640.dtb \
+	k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \
+	k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
+	k3-j721e-evm-pcie0-ep.dtb \
+	k3-j721s2-evm-pcie1-ep.dtb
+
 # Enable support for device-tree overlays
+DTC_FLAGS_k3-am625-beagleplay += -@
 DTC_FLAGS_k3-am625-sk += -@
 DTC_FLAGS_k3-am62-lp-sk += -@
+DTC_FLAGS_k3-am62a7-sk += -@
+DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@
 DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
 DTC_FLAGS_k3-j721e-common-proc-board += -@
 DTC_FLAGS_k3-j721s2-common-proc-board += -@
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index e5c64c86d1d5..464b7565d085 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -121,8 +121,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 
@@ -138,8 +143,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x10000>,
+			      <0x00 0x484a0000 0x00 0x2000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x1000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 
@@ -502,6 +512,9 @@
 	main_gpio0: gpio@600000 {
 		compatible = "ti,am64-gpio", "ti,keystone-gpio";
 		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-ranges = <&main_pmx0  0  0 32>,
+			      <&main_pmx0 32 33 38>,
+			      <&main_pmx0 70 72 22>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
@@ -520,6 +533,10 @@
 		compatible = "ti,am64-gpio", "ti,keystone-gpio";
 		reg = <0x0 0x00601000 0x0 0x100>;
 		gpio-controller;
+		gpio-ranges = <&main_pmx0  0  94 41>,
+			      <&main_pmx0 41 136  6>,
+			      <&main_pmx0 47 143  3>,
+			      <&main_pmx0 50 149  2>;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
 		interrupts = <180>, <181>, <182>,
@@ -675,6 +692,15 @@
 		};
 	};
 
+	gpu: gpu@fd00000 {
+		compatible = "ti,am62-gpu", "img,img-axe";
+		reg = <0x00 0x0fd00000 0x00 0x20000>;
+		clocks = <&k3_clks 187 0>;
+		clock-names = "core";
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+	};
+
 	cpsw3g: ethernet@8000000 {
 		compatible = "ti,am642-cpsw-nuss";
 		#address-cells = <2>;
@@ -965,4 +991,66 @@
 		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
+
+	ti_csi2rx0: ticsi2rx@30102000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		dmas = <&main_bcdma 0 0x4700 0>;
+		dma-names = "rx0";
+		reg = <0x00 0x30102000 0x00 0x1000>;
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@30101000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x30101000 0x00 0x1000>;
+			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@30110000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x30110000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
index 013357d17d48..bf6d27e70bc4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
@@ -214,6 +214,5 @@
 
 /* Verdin UART_2 */
 &wkup_uart0 {
-	/* FIXME: WKUP UART0 is used by DM firmware */
-	status = "reserved";
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
index 6701cb8974bb..680071688dcb 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
@@ -235,6 +235,5 @@
 
 /* Verdin UART_2 */
 &wkup_uart0 {
-	/* FIXME: WKUP UART0 is used by DM firmware */
-	status = "reserved";
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
new file mode 100644
index 000000000000..17b93534f658
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
+			    <&pinctrl_qspi1_cs_gpio>,
+			    <&pinctrl_qspi1_io0_gpio>,
+			    <&pinctrl_qspi1_io1_gpio>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin ETH */
+&cpsw3g {
+	status = "okay";
+};
+
+/* Verdin MDIO */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1*/
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 and PWM_2*/
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_3 DSI */
+&epwm1 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
+		    <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+	status = "okay";
+
+	/* Temperature sensor */
+	sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2 DSI */
+&main_i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4 CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	pinctrl-0 = <&pinctrl_spi1>,
+		    <&pinctrl_spi1_cs0>,
+		    <&pinctrl_qspi1_cs2_gpio>;
+	cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
index c685df7deaee..997dfafd27eb 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
@@ -207,6 +207,5 @@
 
 /* Verdin UART_2 */
 &wkup_uart0 {
-	/* FIXME: WKUP UART0 is used by DM firmware */
-	status = "reserved";
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
index 5db52f237253..6a06724b6d16 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
@@ -233,6 +233,13 @@
 		>;
 	};
 
+	/* Verdin SPI_1 CS as GPIO */
+	pinctrl_qspi1_io4_gpio: main-gpio0-7-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x001c, PIN_INPUT, 7) /* (J23) OSPI0_D4.GPIO0_7 */ /* SODIMM 202 */
+		>;
+	};
+
 	/* Verdin QSPI_1_CS# as GPIO (conflict with Verdin QSPI_1 interface) */
 	pinctrl_qspi1_cs_gpio: main-gpio0-11-default-pins {
 		pinctrl-single,pins = <
@@ -599,12 +606,18 @@
 	pinctrl_spi1: main-spi1-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0020, PIN_INPUT, 1) /* (J25) OSPI0_D5.SPI1_CLK */ /* SODIMM 196 */
-			AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */
 			AM62X_IOPAD(0x0024, PIN_INPUT, 1) /* (H25) OSPI0_D6.SPI1_D0  */ /* SODIMM 200 */
 			AM62X_IOPAD(0x0028, PIN_INPUT, 1) /* (J22) OSPI0_D7.SPI1_D1  */ /* SODIMM 198 */
 		>;
 	};
 
+	/* Verdin SPI_1 CS */
+	pinctrl_spi1_cs0: main-spi1-cs0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */
+		>;
+	};
+
 	/* ETH_25MHz_CLK */
 	pinctrl_eth_clock: main-system-clkout0-default-pins {
 		pinctrl-single,pins = <
@@ -1278,7 +1291,7 @@
 /* Verdin SPI_1 */
 &main_spi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1>;
+	pinctrl-0 = <&pinctrl_spi1>, <&pinctrl_spi1_cs0>;
 	ti,pindir-d0-out-d1-in;
 	status = "disabled";
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso
new file mode 100644
index 000000000000..5e80ca7033ba
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+};
+
+&main_gpio0 {
+	p11-hog {
+		/* P11 - CSI2_CAMERA_GPIO1 */
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "CSI2_CAMERA_GPIO1";
+	};
+};
+
+&wkup_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2rx0_in_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
new file mode 100644
index 000000000000..5e1cbbc27c8f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Technexion TEVI-OV5640-*-RPI - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&main_gpio0 {
+	p11-hog {
+		/* P11 - CSI2_CAMERA_GPIO1 */
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "CSI2_CAMERA_GPIO1";
+	};
+};
+
+&wkup_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2rx0_in_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 9a6bd0a3c94f..eadbdd9ffe37 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -443,7 +443,7 @@
 		>;
 	};
 
-	console_pins_default: console-default-pins {
+	main_uart0_pins_default: main-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
@@ -877,7 +877,7 @@
 &main_uart0 {
 	bootph-all;
 	pinctrl-names = "default";
-	pinctrl-0 = <&console_pins_default>;
+	pinctrl-0 = <&main_uart0_pins_default>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
index a438baf542c2..4bc0134c987d 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
@@ -35,6 +35,18 @@
 		standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
 	};
 
+	hdmi0: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+
 	keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -93,6 +105,37 @@
 		>;
 	};
 
+	hdmi_int_pins_default: hdmi-int-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */
+		>;
+	};
+
+	main_dss0_pins_default: main-dss0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+			AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+			AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+			AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+			AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+			AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+			AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+			AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+			AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+			AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+			AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+			AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+			AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+			AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+			AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+			AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+			AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+			AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+			AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+			AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+		>;
+	};
+
 	main_i2c1_pins_default: main-i2c1-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
@@ -184,10 +227,30 @@
 	};
 };
 
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_dss0_pins_default>;
+	status = "okay";
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* VP2: DPI/HDMI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
 &main_i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 	status = "okay";
 
 	gpio_exp: gpio-expander@21 {
@@ -201,12 +264,43 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN",
+		gpio-line-names = "", "GPIO1_CAN0_nEN",
 				  "GPIO2_LED2", "GPIO3_LVDS_GPIO",
 				  "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN",
 				  "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
 	};
 
+	sii9022: bridge-hdmi@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_int_pins_default>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
 	eeprom@51 {
 		compatible = "atmel,24c02";
 		pagesize = <16>;
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000000..9cae12106e0e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-nonwifi.dtsi"
+#include "k3-am62-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 on Mallow Board";
+	compatible = "toradex,verdin-am62-nonwifi-mallow",
+		     "toradex,verdin-am62-nonwifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts
new file mode 100644
index 000000000000..81d834b22649
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-wifi.dtsi"
+#include "k3-am62-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 WB on Mallow Board";
+	compatible = "toradex,verdin-am62-wifi-mallow",
+		     "toradex,verdin-am62-wifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 4ae7fdc5221b..f0b8c9ab1459 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -101,8 +101,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 			ti,sci = <&dmsc>;
@@ -117,8 +122,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x10000>,
+			      <0x00 0x484a0000 0x00 0x2000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x1000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 			ti,sci = <&dmsc>;
@@ -144,6 +154,44 @@
 		};
 	};
 
+	dmss_csi: bus@4e000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x300000>;
+
+		ti,sci-dev-id = <198>;
+
+		inta_main_dmss_csi: interrupt-controller@4e0a0000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x4e0a0000 0x00 0x8000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <200>;
+			ti,interrupt-ranges = <0 237 8>;
+			ti,unmapped-event-sources = <&main_bcdma_csi>;
+			power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		};
+
+		main_bcdma_csi: dma-controller@4e230000 {
+			compatible = "ti,am62a-dmss-bcdma-csirx";
+			reg = <0x00 0x4e230000 0x00 0x100>,
+			      <0x00 0x4e180000 0x00 0x8000>,
+			      <0x00 0x4e100000 0x00 0x10000>;
+			reg-names = "gcfg", "rchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss_csi>;
+			#dma-cells = <3>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <199>;
+			ti,sci-rm-range-rchan = <0x21>;
+			power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		};
+	};
+
 	dmsc: system-controller@44043000 {
 		compatible = "ti,k2g-sci";
 		reg = <0x00 0x44043000 0x00 0xfe0>;
@@ -462,7 +510,7 @@
 			     <193>, <194>, <195>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <87>;
+		ti,ngpio = <92>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 77 0>;
@@ -480,7 +528,7 @@
 			     <183>, <184>, <185>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <88>;
+		ti,ngpio = <52>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 78 0>;
@@ -876,4 +924,65 @@
 		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
+
+	ti_csi2rx0: ticsi2rx@30102000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		dmas = <&main_bcdma_csi 0 0x5000 0>;
+		dma-names = "rx0";
+		reg = <0x00 0x30102000 0x00 0x1000>;
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@30101000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x30101000 0x00 0x1000>;
+			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@30110000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x30110000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 8f64ac2c7568..7b7142586295 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -274,6 +274,12 @@
 			AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18) GPMC0_ADVn_ALE.MCASP1_AXR2 */
 		>;
 	};
+
+	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
+		>;
+	};
 };
 
 &mcu_pmx0 {
@@ -407,6 +413,12 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
 
 		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
 				   "BT_EN_SOC", "MMC1_SD_EN",
@@ -434,6 +446,33 @@
 		DRVDD-supply = <&vcc_3v3_sys>;
 		DVDD-supply = <&buck5>;
 	};
+
+	exp2: gpio@23 {
+		compatible = "ti,tca6424";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "", "",
+				  "", "",
+				  "", "",
+				  "", "",
+				  "WL_LT_EN", "CSI_RSTz",
+				  "", "",
+				  "", "",
+				  "", "",
+				  "SPI0_FET_SEL", "SPI0_FET_OE",
+				  "RGMII2_BRD_CONN_DET", "CSI_SEL2",
+				  "CSI_EN", "AUTO_100M_1000M_CONFIG",
+				  "CSI_VLDO_SEL", "SoC_WLAN_SDIO_RST";
+	};
+};
+
+&main_i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
 };
 
 &sdhci1 {
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index 963758c7d377..4c51bae06b57 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -101,8 +101,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 
@@ -119,8 +124,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x10000>,
+			      <0x00 0x484a0000 0x00 0x2000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x1000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 			bootph-all;
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index f377eadef0c1..1773c05f752c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -598,3 +598,12 @@
 	status = "reserved";
 	bootph-all;
 };
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&mcu_gpio_intr {
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 19f57ead4ebd..33768c02d8eb 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -399,6 +399,13 @@
 	};
 };
 
+&main_i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+};
+
 &sdhci0 {
 	bootph-all;
 	status = "okay";
@@ -517,3 +524,12 @@
 		};
 	};
 };
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&mcu_gpio_intr {
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
new file mode 100644
index 000000000000..6f4cd73c2f43
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IMX219 (RPi v2) Camera Module
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_imx219_fixed: imx219-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&main_i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		/* CAM port */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ov5640: camera@10 {
+				compatible = "sony,imx219";
+				reg = <0x10>;
+
+				clocks = <&clk_imx219_fixed>;
+				clock-names = "xclk";
+
+				reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>;
+
+				port {
+					csi2_cam0: endpoint {
+						remote-endpoint = <&csi2rx0_in_sensor>;
+						link-frequencies = /bits/ 64 <456000000>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
new file mode 100644
index 000000000000..9323a4b38389
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+};
+
+&main_i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		/* CAM port */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ov5640: camera@3c {
+				compatible = "ovti,ov5640";
+				reg = <0x3c>;
+
+				clocks = <&clk_ov5640_fixed>;
+				clock-names = "xclk";
+				powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
+
+				port {
+					csi2_cam0: endpoint {
+						remote-endpoint = <&csi2rx0_in_sensor>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
new file mode 100644
index 000000000000..dcaa33a4c8d3
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Technexion TEVI-OV5640-*-RPI - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&main_i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		/* CAM port */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ov5640: camera@3c {
+				compatible = "ovti,ov5640";
+				reg = <0x3c>;
+
+				clocks = <&clk_ov5640_fixed>;
+				clock-names = "xclk";
+				powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
+
+				port {
+					csi2_cam0: endpoint {
+						remote-endpoint = <&csi2rx0_in_sensor>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 0be642bc1b86..e348114f42e0 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -63,7 +63,7 @@
 			#phy-cells = <1>;
 		};
 
-		epwm_tbclk: clock-controller@4140 {
+		epwm_tbclk: clock-controller@4130 {
 			compatible = "ti,am64-epwm-tbclk";
 			reg = <0x4130 0x4>;
 			#clock-cells = <1>;
@@ -138,8 +138,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 
@@ -155,8 +160,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x20000>,
+			      <0x00 0x484a0000 0x00 0x4000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 
@@ -623,6 +633,7 @@
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x6>;
 		ti,otap-del-sel-hs200 = <0x7>;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@fa00000 {
@@ -641,6 +652,7 @@
 		ti,otap-del-sel-sdr104 = <0x6>;
 		ti,otap-del-sel-ddr50 = <0x9>;
 		ti,clkbuf-sel = <0x7>;
+		status = "disabled";
 	};
 
 	cpsw3g: ethernet@8000000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index f87f09d83c95..1678e74cb750 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -29,7 +29,7 @@
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -39,6 +39,54 @@
 			alignment = <0x1000>;
 			no-map;
 		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
 	};
 
 	leds {
@@ -166,6 +214,34 @@
 	status = "disabled";
 };
 
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
 &main_i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -191,6 +267,30 @@
 	};
 };
 
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
 &ospi0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -211,6 +311,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 4dba18941015..8c5651d2cf5d 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -468,11 +468,15 @@
 	bootph-all;
 };
 
-/* mcu_gpio0 is reserved for mcu firmware usage */
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
 &mcu_gpio0 {
 	status = "reserved";
 };
 
+&mcu_gpio_intr {
+	status = "reserved";
+};
+
 &main_spi0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -487,17 +491,19 @@
 	};
 };
 
+/* eMMC */
 &sdhci0 {
-	/* emmc */
+	status = "okay";
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
+/* SD/MMC */
 &sdhci1 {
-	/* SD/MMC */
 	bootph-all;
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	bus-width = <4>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
index 9175e96842d8..53b64e55413f 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -264,6 +264,7 @@
 };
 
 &sdhci1 {
+	status = "okay";
 	vmmc-supply = <&vcc_3v3_mmc>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index f29c8a9b59ba..1dddd6fc1a0d 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -433,12 +433,17 @@
 	};
 };
 
-/* mcu_gpio0 is reserved for mcu firmware usage */
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
 &mcu_gpio0 {
 	status = "reserved";
 };
 
+&mcu_gpio_intr {
+	status = "reserved";
+};
+
 &sdhci0 {
+	status = "okay";
 	vmmc-supply = <&wlan_en>;
 	bus-width = <4>;
 	non-removable;
@@ -458,9 +463,10 @@
 	};
 };
 
+/* SD/MMC */
 &sdhci1 {
-	/* SD/MMC */
 	bootph-all;
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	bus-width = <4>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
index d95d80076a42..55102d35cecc 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
@@ -425,7 +425,6 @@
 	ti,driver-strength-ohm = <50>;
 	ti,fails-without-test-cd;
 	/* Enabled by overlay */
-	status = "disabled";
 };
 
 &tscadc0 {
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
index d82d4a98306a..6c785eff7d2f 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
@@ -219,6 +219,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	non-removable;
 	disable-wp;
 	no-sdio;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
index 51f902fa35a7..1d1979859583 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) Siemens AG, 2021
+ * Copyright (c) Siemens AG, 2021-2023
  *
  * Authors:
  *   Jan Kiszka <jan.kiszka@siemens.com>
@@ -44,3 +44,11 @@
 &tx_pru2_1 {
 	status = "disabled";
 };
+
+&icssg0_eth {
+	status = "disabled";
+};
+
+&icssg0_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
index e9419c4fe605..e9b57b87e42e 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
@@ -20,7 +20,9 @@
 
 &main_gpio1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&cp2102n_reset_pin_default>;
+	pinctrl-0 =
+		<&main_pcie_enable_pins_default>,
+		<&cp2102n_reset_pin_default>;
 	gpio-line-names =
 		"", "", "", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "", "", "",
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index ba1c14a54acf..61a634afaa4f 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -9,14 +9,26 @@
  * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2
  */
 
-#include "k3-am654.dtsi"
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/net/ti-dp83867.h>
 
 / {
 	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &main_i2c0;
+		i2c3 = &main_i2c1;
+		i2c4 = &main_i2c2;
+		i2c5 = &main_i2c3;
 		spi0 = &mcu_spi0;
 		mmc0 = &sdhci1;
 		mmc1 = &sdhci0;
+		ethernet1 = &icssg0_emac0;
+		ethernet2 = &icssg0_emac1;
 	};
 
 	chosen {
@@ -101,9 +113,498 @@
 		#clock-cells = <0>;
 		clock-frequency = <19200000>;
 	};
+
+	/* Dual Ethernet application node on PRU-ICSSG0 */
+	icssg0_eth: icssg0-eth {
+		compatible = "ti,am654-icssg-prueth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&icssg0_rgmii_pins_default>;
+		sram = <&msmc_ram>;
+
+		ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>,
+			<&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
+		firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+		ti,pruss-gp-mux-sel = <2>,      /* MII mode */
+				      <2>,
+				      <2>,
+				      <2>,	/* MII mode */
+				      <2>,
+				      <2>;
+
+		ti,mii-g-rt = <&icssg0_mii_g_rt>;
+		ti,mii-rt = <&icssg0_mii_rt>;
+		ti,iep = <&icssg0_iep0>,  <&icssg0_iep1>;
+
+		interrupt-parent = <&icssg0_intc>;
+		interrupts = <24 0 2>, <25 1 3>;
+		interrupt-names = "tx_ts0", "tx_ts1";
+
+		dmas = <&main_udmap 0xc100>, /* egress slice 0 */
+		       <&main_udmap 0xc101>, /* egress slice 0 */
+		       <&main_udmap 0xc102>, /* egress slice 0 */
+		       <&main_udmap 0xc103>, /* egress slice 0 */
+		       <&main_udmap 0xc104>, /* egress slice 1 */
+		       <&main_udmap 0xc105>, /* egress slice 1 */
+		       <&main_udmap 0xc106>, /* egress slice 1 */
+		       <&main_udmap 0xc107>, /* egress slice 1 */
+		       <&main_udmap 0x4100>, /* ingress slice 0 */
+		       <&main_udmap 0x4101>; /* ingress slice 1 */
+		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+			    "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+			    "rx0", "rx1";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			icssg0_emac0: port@0 {
+				reg = <0>;
+				phy-handle = <&icssg0_eth0_phy>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4100>;
+				ti,half-duplex-capable;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			icssg0_emac1: port@1 {
+				reg = <1>;
+				phy-handle = <&icssg0_eth1_phy>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4104>;
+				ti,half-duplex-capable;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
 };
 
 &wkup_pmx0 {
+	pinctrl-names =
+		"default",
+		"d0-uart0-rxd",  "d0-gpio",  "d0-gpio-pullup",  "d0-gpio-pulldown",
+		"d1-uart0-txd",  "d1-gpio",  "d1-gpio-pullup",  "d1-gpio-pulldown",
+		"d2-uart0-ctsn", "d2-gpio",  "d2-gpio-pullup",  "d2-gpio-pulldown",
+		"d3-uart0-rtsn", "d3-gpio",  "d3-gpio-pullup",  "d3-gpio-pulldown",
+		"d10-spi0-cs0",  "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown",
+		"d11-spi0-d0",   "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown",
+		"d12-spi0-d1",   "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown",
+		"d13-spi0-clk",  "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown",
+		"a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown",
+		"a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown",
+		"a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown",
+		"a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown",
+		"a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown",
+		"a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown";
+
+	pinctrl-0 = <&d0_uart0_rxd>;
+	pinctrl-1 = <&d0_uart0_rxd>;
+	pinctrl-2 = <&d0_gpio>;
+	pinctrl-3 = <&d0_gpio_pullup>;
+	pinctrl-4 = <&d0_gpio_pulldown>;
+	pinctrl-5 = <&d1_uart0_txd>;
+	pinctrl-6 = <&d1_gpio>;
+	pinctrl-7 = <&d1_gpio_pullup>;
+	pinctrl-8 = <&d1_gpio_pulldown>;
+	pinctrl-9 = <&d2_uart0_ctsn>;
+	pinctrl-10 = <&d2_gpio>;
+	pinctrl-11 = <&d2_gpio_pullup>;
+	pinctrl-12 = <&d2_gpio_pulldown>;
+	pinctrl-13 = <&d3_uart0_rtsn>;
+	pinctrl-14 = <&d3_gpio>;
+	pinctrl-15 = <&d3_gpio_pullup>;
+	pinctrl-16 = <&d3_gpio_pulldown>;
+	pinctrl-17 = <&d10_spi0_cs0>;
+	pinctrl-18 = <&d10_gpio>;
+	pinctrl-19 = <&d10_gpio_pullup>;
+	pinctrl-20 = <&d10_gpio_pulldown>;
+	pinctrl-21 = <&d11_spi0_d0>;
+	pinctrl-22 = <&d11_gpio>;
+	pinctrl-23 = <&d11_gpio_pullup>;
+	pinctrl-24 = <&d11_gpio_pulldown>;
+	pinctrl-25 = <&d12_spi0_d1>;
+	pinctrl-26 = <&d12_gpio>;
+	pinctrl-27 = <&d12_gpio_pullup>;
+	pinctrl-28 = <&d12_gpio_pulldown>;
+	pinctrl-29 = <&d13_spi0_clk>;
+	pinctrl-30 = <&d13_gpio>;
+	pinctrl-31 = <&d13_gpio_pullup>;
+	pinctrl-32 = <&d13_gpio_pulldown>;
+	pinctrl-33 = <&a0_gpio>;
+	pinctrl-34 = <&a0_gpio_pullup>;
+	pinctrl-35 = <&a0_gpio_pulldown>;
+	pinctrl-36 = <&a1_gpio>;
+	pinctrl-37 = <&a1_gpio_pullup>;
+	pinctrl-38 = <&a1_gpio_pulldown>;
+	pinctrl-39 = <&a2_gpio>;
+	pinctrl-40 = <&a2_gpio_pullup>;
+	pinctrl-41 = <&a2_gpio_pulldown>;
+	pinctrl-42 = <&a3_gpio>;
+	pinctrl-43 = <&a3_gpio_pullup>;
+	pinctrl-44 = <&a3_gpio_pulldown>;
+	pinctrl-45 = <&a4_gpio>;
+	pinctrl-46 = <&a4_gpio_pullup>;
+	pinctrl-47 = <&a4_gpio_pulldown>;
+	pinctrl-48 = <&a5_gpio>;
+	pinctrl-49 = <&a5_gpio_pullup>;
+	pinctrl-50 = <&a5_gpio_pulldown>;
+
+	d0_uart0_rxd: d0-uart0-rxd-pins {
+		pinctrl-single,pins = <
+			/* (P4) MCU_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)
+		>;
+	};
+
+	d0_gpio: d0-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7)
+		>;
+	};
+
+	d0_gpio_pullup: d0-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d0_gpio_pulldown: d0-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d1_uart0_txd: d1-uart0-txd-pins {
+		pinctrl-single,pins = <
+			/* (P5) MCU_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
+		>;
+	};
+
+	d1_gpio: d1-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
+		>;
+	};
+
+	d1_gpio_pullup: d1-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
+		>;
+	};
+
+	d1_gpio_pulldown: d1-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d2_uart0_ctsn: d2-uart0-ctsn-pins {
+		pinctrl-single,pins = <
+			/* (P1) MCU_UART0_CTSn */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4)
+		>;
+	};
+
+	d2_gpio: d2-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
+		>;
+	};
+
+	d2_gpio_pullup: d2-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
+		>;
+	};
+
+	d2_gpio_pulldown: d2-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d3_uart0_rtsn: d3-uart0-rtsn-pins {
+		pinctrl-single,pins = <
+			/* (N3) MCU_UART0_RTSn */
+			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4)
+		>;
+	};
+
+	d3_gpio: d3-gpio-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
+		>;
+	};
+
+	d3_gpio_pullup: d3-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
+		>;
+	};
+
+	d3_gpio_pulldown: d3-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d10_spi0_cs0: d10-spi0-cs0-pins {
+		pinctrl-single,pins = <
+			/* (Y4) MCU_SPI0_CS0 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0)
+		>;
+	};
+
+	d10_gpio: d10-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
+		>;
+	};
+
+	d10_gpio_pullup: d10-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
+		>;
+	};
+
+	d10_gpio_pulldown: d10-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d11_spi0_d0: d11-spi0-d0-pins {
+		pinctrl-single,pins = <
+			/* (Y3) MCU_SPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0)
+		>;
+	};
+
+	d11_gpio: d11-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
+		>;
+	};
+
+	d11_gpio_pullup: d11-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
+		>;
+	};
+
+	d11_gpio_pulldown: d11-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d12_spi0_d1: d12-spi0-d1-pins {
+		pinctrl-single,pins = <
+			/* (Y2) MCU_SPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0)
+		>;
+	};
+
+	d12_gpio: d12-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d12_gpio_pullup: d12-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d12_gpio_pulldown: d12-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d13_spi0_clk: d13-spi0-clk-pins {
+		pinctrl-single,pins = <
+			/* (Y1) MCU_SPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0)
+		>;
+	};
+
+	d13_gpio: d13-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
+		>;
+	};
+
+	d13_gpio_pullup: d13-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
+		>;
+	};
+
+	d13_gpio_pulldown: d13-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a0_gpio: a0-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	a0_gpio_pullup: a0-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	a0_gpio_pulldown: a0-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a1_gpio: a1-gpio-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
+		>;
+	};
+
+	a1_gpio_pullup: a1-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
+		>;
+	};
+
+	a1_gpio_pulldown: a1-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a2_gpio: a2-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
+		>;
+	};
+
+	a2_gpio_pullup: a2-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
+		>;
+	};
+
+	a2_gpio_pulldown: a2-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a3_gpio: a3-gpio-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
+		>;
+	};
+
+	a3_gpio_pullup: a3-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
+		>;
+	};
+
+	a3_gpio_pulldown: a3-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a4_gpio: a4-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
+		>;
+	};
+
+	a4_gpio_pullup: a4-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
+		>;
+	};
+
+	a4_gpio_pulldown: a4-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a5_gpio: a5-gpio-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7)
+		>;
+	};
+
+	a5_gpio_pullup: a5-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	a5_gpio_pulldown: a5-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		pinctrl-single,pins = <
 			/* (AC7) WKUP_I2C0_SCL */
@@ -136,23 +637,6 @@
 		>;
 	};
 
-	arduino_uart_pins_default: arduino-uart-default-pins {
-		pinctrl-single,pins = <
-			/* (P4) MCU_UART0_RXD */
-			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT,  4)
-			/* (P5) MCU_UART0_TXD */
-			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
-		>;
-	};
-
-	arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins {
-		pinctrl-single,pins = <
-			/* (P1) WKUP_GPIO0_31 */
-			AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7)
-			/* (N3) WKUP_GPIO0_33 */
-			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7)
-		>;
-	};
 
 	arduino_io_oe_pins_default: arduino-io-oe-default-pins {
 		pinctrl-single,pins = <
@@ -232,6 +716,220 @@
 };
 
 &main_pmx0 {
+	pinctrl-names =
+		"default",
+		"d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown",
+		"d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown",
+		"d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown",
+		"d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown",
+		"d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown",
+		"d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown";
+
+	pinctrl-0 = <&d4_ehrpwm0_a>;
+	pinctrl-1 = <&d4_ehrpwm0_a>;
+	pinctrl-2 = <&d4_gpio>;
+	pinctrl-3 = <&d4_gpio_pullup>;
+	pinctrl-4 = <&d4_gpio_pulldown>;
+
+	pinctrl-5 = <&d5_ehrpwm1_a>;
+	pinctrl-6 = <&d5_gpio>;
+	pinctrl-7 = <&d5_gpio_pullup>;
+	pinctrl-8 = <&d5_gpio_pulldown>;
+
+	pinctrl-9 = <&d6_ehrpwm2_a>;
+	pinctrl-10 = <&d6_gpio>;
+	pinctrl-11 = <&d6_gpio_pullup>;
+	pinctrl-12 = <&d6_gpio_pulldown>;
+
+	pinctrl-13 = <&d7_ehrpwm3_a>;
+	pinctrl-14 = <&d7_gpio>;
+	pinctrl-15 = <&d7_gpio_pullup>;
+	pinctrl-16 = <&d7_gpio_pulldown>;
+
+	pinctrl-17 = <&d8_ehrpwm4_a>;
+	pinctrl-18 = <&d8_gpio>;
+	pinctrl-19 = <&d8_gpio_pullup>;
+	pinctrl-20 = <&d8_gpio_pulldown>;
+
+	pinctrl-21 = <&d9_ehrpwm5_a>;
+	pinctrl-22 = <&d9_gpio>;
+	pinctrl-23 = <&d9_gpio_pullup>;
+	pinctrl-24 = <&d9_gpio_pulldown>;
+
+	d4_ehrpwm0_a: d4-ehrpwm0-a-pins {
+		pinctrl-single,pins = <
+			/* (AG18) EHRPWM0_A */
+			AM65X_IOPAD(0x0084, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d4_gpio: d4-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	d4_gpio_pullup: d4-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d4_gpio_pulldown: d4-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d5_ehrpwm1_a: d5-ehrpwm1-a-pins {
+		pinctrl-single,pins = <
+			/* (AF17) EHRPWM1_A */
+			AM65X_IOPAD(0x008C, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d5_gpio: d5-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT, 7)
+		>;
+	};
+
+	d5_gpio_pullup: d5-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d5_gpio_pulldown: d5-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d6_ehrpwm2_a: d6-ehrpwm2-a-pins {
+		pinctrl-single,pins = <
+			/* (AH16) EHRPWM2_A */
+			AM65X_IOPAD(0x0098, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d6_gpio: d6-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d6_gpio_pullup: d6-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d6_gpio_pulldown: d6-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d7_ehrpwm3_a: d7-ehrpwm3-a-pins {
+		pinctrl-single,pins = <
+			/* (AH15) EHRPWM3_A */
+			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d7_gpio: d7-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT, 7)
+		>;
+	};
+
+	d7_gpio_pullup: d7-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d7_gpio_pulldown: d7-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d8_ehrpwm4_a: d8-ehrpwm4-a-pins {
+		pinctrl-single,pins = <
+			/* (AG15) EHRPWM4_A */
+			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d8_gpio: d8-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT, 7)
+		>;
+	};
+
+	d8_gpio_pullup: d8-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d8_gpio_pulldown: d8-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d9_ehrpwm5_a: d9-ehrpwm5-a-pins {
+		pinctrl-single,pins = <
+			/* (AD15) EHRPWM5_A */
+			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d9_gpio: d9-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT, 7)
+		>;
+	};
+
+	d9_gpio_pullup: d9-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d9_gpio_pulldown: d9-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	main_pcie_enable_pins_default: main-pcie-enable-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
+		>;
+	};
+
 	main_uart1_pins_default: main-uart1-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x0174, PIN_INPUT,  6)  /* (AE23) UART1_RXD */
@@ -273,17 +971,6 @@
 		>;
 	};
 
-	arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x0084, PIN_OUTPUT, 7)  /* (AG18) GPIO0_33 */
-			AM65X_IOPAD(0x008C, PIN_OUTPUT, 7)  /* (AF17) GPIO0_35 */
-			AM65X_IOPAD(0x0098, PIN_OUTPUT, 7)  /* (AH16) GPIO0_38 */
-			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7)  /* (AH15) GPIO0_43 */
-			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7)  /* (AG15) GPIO0_48 */
-			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7)  /* (AD15) GPIO0_51 */
-		>;
-	};
-
 	dss_vout1_pins_default: dss-vout1-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x0000, PIN_OUTPUT, 1)  /* VOUT1_DATA0 */
@@ -329,6 +1016,43 @@
 			AM65X_IOPAD(0x0070, PIN_INPUT,  5)  /* (R25) I2C2_SDA */
 		>;
 	};
+
+	icssg0_mdio_pins_default: icssg0-mdio-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */
+			AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */
+		>;
+	};
+
+	icssg0_rgmii_pins_default: icssg0-rgmii-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */
+			AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */
+			AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */
+			AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */
+			AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */
+			AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */
+			AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */
+			AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */
+			AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */
+			AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */
+			AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */
+			AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */
+
+			AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */
+			AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */
+			AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */
+			AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */
+			AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */
+			AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */
+			AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */
+			AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */
+			AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */
+			AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */
+			AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */
+			AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */
+		>;
+	};
 };
 
 &main_pmx1 {
@@ -345,12 +1069,6 @@
 			AM65X_IOPAD(0x000c, PIN_INPUT,  0)  /* (E21) I2C1_SDA */
 		>;
 	};
-
-	ecap0_pins_default: ecap0-default-pins {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x0010, PIN_INPUT,  0)  /* (D21) ECAP0_IN_APWM_OUT */
-		>;
-	};
 };
 
 &wkup_uart0 {
@@ -366,13 +1084,9 @@
 
 &mcu_uart0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&arduino_uart_pins_default>;
 };
 
 &main_gpio0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>;
 	gpio-line-names =
 		"main_gpio0-base", "", "", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "", "", "",
@@ -382,10 +1096,14 @@
 		"", "IO9";
 };
 
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_pcie_enable_pins_default>;
+};
+
 &wkup_gpio0 {
 	pinctrl-names = "default";
 	pinctrl-0 =
-		<&arduino_io_d2_to_d3_pins_default>,
 		<&arduino_i2c_aio_switch_pins_default>,
 		<&arduino_io_oe_pins_default>,
 		<&push_button_pins_default>,
@@ -547,13 +1265,8 @@
 	status = "disabled";
 };
 
-&ecap0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ecap0_pins_default>;
-};
-
 &sdhci1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	ti,driver-strength-ohm = <50>;
@@ -574,9 +1287,6 @@
 
 &mcu_spi0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_spi0_pins_default>;
-
 	#address-cells = <1>;
 	#size-cells = <0>;
 	ti,pindir-d0-out-d1-in;
@@ -716,3 +1426,21 @@
 			<&mcu_r5fss0_core1_memory_region>;
 	mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
 };
+
+&icssg0_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&icssg0_mdio_pins_default>;
+
+	icssg0_eth0_phy: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+
+	icssg0_eth1_phy: ethernet-phy@1 {
+		reg = <1>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 5ebb87f467de..fcea54465636 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -449,6 +449,7 @@
 		ti,otap-del-sel-hs400 = <0x0>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@4fa0000 {
@@ -471,6 +472,7 @@
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		status = "disabled";
 	};
 
 	scm_conf: scm-conf@100000 {
@@ -498,8 +500,8 @@
 		};
 
 		dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
-			compatible = "syscon";
-			reg = <0x000041e0 0x14>;
+			compatible = "ti,am654-dss-oldi-io-ctrl", "syscon";
+			reg = <0x41e0 0x14>;
 		};
 
 		ehrpwm_tbclk: clock-controller@4140 {
@@ -790,8 +792,12 @@
 			compatible = "ti,am654-navss-main-udmap";
 			reg = <0x0 0x31150000 0x0 0x100>,
 			      <0x0 0x34000000 0x0 0x100000>,
-			      <0x0 0x35000000 0x0 0x100000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x35000000 0x0 0x100000>,
+			      <0x0 0x30b00000 0x0 0x10000>,
+			      <0x0 0x30c00000 0x0 0x10000>,
+			      <0x0 0x30d00000 0x0 0x8000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_udmass>;
 			#dma-cells = <1>;
 
@@ -1034,7 +1040,7 @@
 		assigned-clocks = <&k3_clks 67 2>;
 		assigned-clock-parents = <&k3_clks 67 5>;
 
-		interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 
 		dma-coherent;
 
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index edd5cfbec40e..ecd7356f3315 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -214,8 +214,12 @@
 			compatible = "ti,am654-navss-mcu-udmap";
 			reg = <0x0 0x285c0000 0x0 0x100>,
 			      <0x0 0x2a800000 0x0 0x40000>,
-			      <0x0 0x2aa00000 0x0 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x2aa00000 0x0 0x40000>,
+			      <0x0 0x284a0000 0x0 0x4000>,
+			      <0x0 0x284c0000 0x0 0x4000>,
+			      <0x0 0x28400000 0x0 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_udmass>;
 			#dma-cells = <1>;
 
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index fd2b998ebddc..f037b36243ce 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -34,9 +34,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x43000014 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	wkup_pmx0: pinctrl@4301c000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am652.dtsi b/arch/arm64/boot/dts/ti/k3-am652.dtsi
new file mode 100644
index 000000000000..0f22e00faa90
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am652.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM65 SoC family in Dual core configuration
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am65.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	thermal_zones: thermal-zones {
+		#include "k3-am654-industrial-thermal.dtsi"
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
index 5ab434c02ab6..1d6cddb11991 100644
--- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
@@ -9,6 +9,7 @@
  * Common bits of the IOT2050 Basic variant, PG1 and PG2
  */
 
+#include "k3-am652.dtsi"
 #include "k3-am65-iot2050-common.dtsi"
 
 / {
@@ -17,21 +18,6 @@
 		/* 1G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
 	};
-
-	cpus {
-		cpu-map {
-			/delete-node/ cluster1;
-		};
-		/delete-node/ cpu@100;
-		/delete-node/ cpu@101;
-	};
-
-	/delete-node/ l2-cache1;
-};
-
-/* eMMC */
-&sdhci0 {
-	status = "disabled";
 };
 
 &main_pmx0 {
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 1637ec5ab5ed..822c288d2797 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -449,6 +449,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	bus-width = <8>;
@@ -463,6 +464,7 @@
  * disable sdhci1
  */
 &sdhci1 {
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1_sd>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
index be55494b1f3f..3864ec54e371 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 
+#include "k3-am654.dtsi"
 #include "k3-am65-iot2050-common.dtsi"
 
 / {
@@ -43,6 +44,7 @@
 
 /* eMMC */
 &sdhci0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	bus-width = <8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
index 774eb14ac907..bd6f2e696e94 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -27,12 +27,6 @@
 };
 
 &main_pmx0 {
-	main_m2_enable_pins_default: main-m2-enable-default-pins {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
-		>;
-	};
-
 	main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7)  /* (AG13) GPIO1_15 */
@@ -66,15 +60,13 @@
 
 &main_gpio0 {
 	pinctrl-names = "default";
-	pinctrl-0 =
-		<&main_m2_pcie_mux_control>,
-		<&arduino_io_d4_to_d9_pins_default>;
+	pinctrl-0 = <&main_m2_pcie_mux_control>;
 };
 
 &main_gpio1 {
 	pinctrl-names = "default";
 	pinctrl-0 =
-		<&main_m2_enable_pins_default>,
+		<&main_pcie_enable_pins_default>,
 		<&main_pmx0_m2_config_pins_default>,
 		<&main_pmx1_m2_config_pins_default>,
 		<&cp2102n_reset_pin_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 1e1a82f9d2b8..d0cfdeac21fb 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -31,6 +31,7 @@
 		can1 = &mcu_mcan1;
 		can2 = &main_mcan6;
 		can3 = &main_mcan7;
+		ethernet0 = &cpsw_port1;
 	};
 
 	vusb_main: regulator-vusb-main5v0 {
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 9868c7049bfb..8da591579868 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -433,6 +433,13 @@
 
 &wkup_pmx2 {
 	bootph-all;
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			/* (AA37) MCU_ADC1_AIN4.WKUP_GPIO0_83 */
+			J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 7)
+		>;
+	};
+
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
@@ -631,6 +638,93 @@
 		compatible = "atmel,24c512";
 		reg = <0x51>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck12-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vds_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &wkup_gpio0 {
@@ -671,7 +765,7 @@
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		gpio-line-names	= "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN",
+		gpio-line-names = "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN",
 				"IO_EXP_MCU_RGMII_RST#", "IO_EXP_PCIe0_4L_PERST#",
 				"IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_PCIe3_M.2_RTSz",
 				"PM_INA_BUS_EN", "ENET1_EXP_PWRDN", "EXP1_ENET_RSTz",
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 264913f83287..da67bf8fe703 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -281,8 +281,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x00 0x31150000 0x00 0x100>,
 			      <0x00 0x34000000 0x00 0x100000>,
-			      <0x00 0x35000000 0x00 0x100000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x35000000 0x00 0x100000>,
+			      <0x00 0x30b00000 0x00 0x4000>,
+			      <0x00 0x30c00000 0x00 0x4000>,
+			      <0x00 0x30d00000 0x00 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
@@ -647,6 +651,7 @@
 		ti,otap-del-sel-hs400 = <0x5>;
 		ti,itap-del-sel-legacy = <0x10>;
 		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
 		ti,strobe-sel = <0x77>;
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 3fc588b848c6..60b26374ae0c 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -178,9 +178,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x00 0x43000014 0x00 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
@@ -346,8 +353,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x00 0x285c0000 0x00 0x100>,
 			      <0x00 0x2a800000 0x00 0x40000>,
-			      <0x00 0x2aa00000 0x00 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x2aa00000 0x00 0x40000>,
+			      <0x00 0x284a0000 0x00 0x4000>,
+			      <0x00 0x284c0000 0x00 0x4000>,
+			      <0x00 0x28400000 0x00 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index 5a300d4c8ba0..ea47f10d393a 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -127,6 +127,14 @@
 	};
 };
 
+&wkup_pmx3 {
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x01c, PIN_INPUT, 7) /* (E18) WKUP_GPIO0_84 */
+		>;
+	};
+};
+
 &main_pmx0 {
 	main_i2c0_pins_default: main-i2c0-default-pins {
 		pinctrl-single,pins = <
@@ -264,6 +272,151 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659414: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck1-supply = <&vsys_3v3>;
+		buck2-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka1: buck1 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka2: buck2 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_phyio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd1_lpddr4_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdd_wk_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	lp876441: pmic@4c {
+		compatible = "ti,lp8764-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1-supply = <&vsys_3v3>;
+		buck2-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+
+		regulators: regulators {
+			buckb1: buck1 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				bootph-pre-ram;
+			};
+
+			buckb2: buck2 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb3: buck3 {
+				regulator-name = "vdd_core_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb4: buck4 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &ospi0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso
new file mode 100644
index 000000000000..0c82a13b65a4
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for enabling PCIE0 instance in Endpoint Configuration with the
+ * J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie0_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie0_ep: pcie-ep@2900000 {
+		compatible = "ti,j721e-pcie-ep";
+		reg = <0x00 0x02900000 0x00 0x1000>,
+		      <0x00 0x02907000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x10000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
+		max-link-speed = <3>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 239 1>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes0_pcie_link>;
+		phy-names = "pcie-phy";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 746b9f8b1c64..2569b4c08ffb 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -382,8 +382,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x0 0x31150000 0x0 0x100>,
 			      <0x0 0x34000000 0x0 0x100000>,
-			      <0x0 0x35000000 0x0 0x100000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x35000000 0x0 0x100000>,
+			      <0x0 0x30b00000 0x0 0x20000>,
+			      <0x0 0x30c00000 0x0 0x10000>,
+			      <0x0 0x30d00000 0x0 0x8000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index f7ab7719fc07..a74912d9e4da 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -48,9 +48,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x0 0x43000014 0x0 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	wkup_pmx0: pinctrl@4301c000 {
@@ -468,8 +475,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x0 0x285c0000 0x0 0x100>,
 			      <0x0 0x2a800000 0x0 0x40000>,
-			      <0x0 0x2aa00000 0x0 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x2aa00000 0x0 0x40000>,
+			      <0x0 0x284a0000 0x0 0x4000>,
+			      <0x0 0x284c0000 0x0 0x4000>,
+			      <0x0 0x28400000 0x0 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 42fe8eee9ec8..188dfe291a32 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -459,6 +459,12 @@
 };
 
 &wkup_pmx0 {
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0cc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
+		>;
+	};
+
 	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */
@@ -560,6 +566,151 @@
 		compatible = "atmel,24c512";
 		reg = <0x51>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck123-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka123: buck123 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-pre-ram;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_phyio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd1_lpddr4_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	tps659411: pmic@4c {
+		compatible = "ti,tps6594-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1234-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			buckb1234: buck1234 {
+				regulator-name = "vdd_core_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb5: buck5 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob1: ldo1 {
+				regulator-name = "vdd_sd_dv";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob2: ldo2 {
+				regulator-name = "vdd_usb_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob3: ldo3 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &mcu_uart0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 7f0686c2ce37..a75611eec791 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -152,6 +152,12 @@
 		>;
 	};
 
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0d4, PIN_INPUT, 7) /* (G26) WKUP_GPIO0_9 */
+		>;
+	};
+
 	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
@@ -199,6 +205,160 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck12-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-pre-ram;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_phyio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd1_lpddr4_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	tps659411: pmic@4c {
+		compatible = "ti,tps6594-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1234-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			buckb1234: buck1234 {
+				regulator-name = "vdd_core_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb5: buck5 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob1: ldo1 {
+				regulator-name = "vdd_sd_dv";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob2: ldo2 {
+				regulator-name = "vdd_usb_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob3: ldo3 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &ospi0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
new file mode 100644
index 000000000000..43568eb67d93
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the
+ * J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie1_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		max-link-speed = <3>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 41>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes0_pcie_link>;
+		phy-names = "pcie-phy";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index b03731b53a26..ea7f2b2ab165 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -766,6 +766,7 @@
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
@@ -1086,8 +1087,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x0 0x31150000 0x0 0x100>,
 			      <0x0 0x34000000 0x0 0x80000>,
-			      <0x0 0x35000000 0x0 0x200000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x35000000 0x0 0x200000>,
+			      <0x0 0x30b00000 0x0 0x20000>,
+			      <0x0 0x30c00000 0x0 0x8000>,
+			      <0x0 0x30d00000 0x0 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 7254f3bd3634..80aa33c58a45 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -34,9 +34,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x00 0x43000014 0x00 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	secure_proxy_sa3: mailbox@43600000 {
@@ -471,8 +478,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x0 0x285c0000 0x0 0x100>,
 			      <0x0 0x2a800000 0x0 0x40000>,
-			      <0x0 0x2aa00000 0x0 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x2aa00000 0x0 0x40000>,
+			      <0x0 0x284a0000 0x0 0x4000>,
+			      <0x0 0x284c0000 0x0 0x4000>,
+			      <0x0 0x28400000 0x0 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index dcad372620b1..da3237b23b63 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -172,6 +172,15 @@
 	};
 };
 
+&wkup_pmx1 {
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			/* (C21) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 7)
+		>;
+	};
+};
+
 &wkup_pmx2 {
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		pinctrl-single,pins = <
@@ -208,6 +217,190 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659411: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck1234-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka1234: buck1234 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-pre-ram;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd_mcuwk_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcu_gpioret_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	tps659414: pmic@4c {
+		compatible = "ti,tps6594-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1-supply = <&vsys_3v3>;
+		buck2-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			buckb1: buck1 {
+				regulator-name = "vdd_io_1v8_reg";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buckb2: buck2 {
+				regulator-name = "vdd_fpd_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb3: buck3 {
+				regulator-name = "vdd_phy_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb4: buck4 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb5: buck5 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob1: ldo1 {
+				regulator-name = "vdd_wk_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob2: ldo2 {
+				regulator-name = "vdd_gpioret_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob3: ldo3 {
+				regulator-name = "vda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	lp876411: pmic@58 {
+		compatible = "ti,lp8764-q1";
+		reg = <0x58>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1234-supply = <&vsys_3v3>;
+
+		regulators {
+			buckc1234: buck1234 {
+				regulator-name = "vdd_core_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &main_i2c0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index f1f4c8634ab6..f34b92acc56d 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -273,6 +273,10 @@
 	};
 };
 
+&wkup_gpio0 {
+	status = "okay";
+};
+
 &main_pmx0 {
 	bootph-all;
 	main_uart8_pins_default: main-uart8-default-pins {
@@ -407,6 +411,17 @@
 	};
 };
 
+&wkup_pmx1 {
+	status = "okay";
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			/* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7)
+		>;
+	};
+};
+
 &wkup_pmx0 {
 	bootph-all;
 	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
@@ -471,6 +486,93 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck12-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vds_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &mcu_uart0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index d89bcddcfe3d..f2b720ed1e4f 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -712,6 +712,7 @@
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
@@ -1188,8 +1189,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x00 0x31150000 0x00 0x100>,
 			      <0x00 0x34000000 0x00 0x80000>,
-			      <0x00 0x35000000 0x00 0x200000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x35000000 0x00 0x200000>,
+			      <0x00 0x30b00000 0x00 0x20000>,
+			      <0x00 0x30c00000 0x00 0x8000>,
+			      <0x00 0x30d00000 0x00 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index adb5ea6b9732..3902a921d7e5 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -38,10 +38,18 @@
 		};
 	};
 
-	chipid@43000014 {
+	wkup_conf: bus@43000000 {
 		bootph-all;
-		compatible = "ti,am654-chipid";
-		reg = <0x00 0x43000014 0x00 0x4>;
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			bootph-all;
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	secure_proxy_sa3: mailbox@43600000 {
@@ -478,8 +486,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x00 0x285c0000 0x00 0x100>,
 			      <0x00 0x2a800000 0x00 0x40000>,
-			      <0x00 0x2aa00000 0x00 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x2aa00000 0x00 0x40000>,
+			      <0x00 0x284a0000 0x00 0x4000>,
+			      <0x00 0x284c0000 0x00 0x4000>,
+			      <0x00 0x28400000 0x00 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
index 5e40c0b4fa0a..1068b0fa8e98 100644
--- a/arch/arm64/boot/dts/xilinx/Makefile
+++ b/arch/arm64/boot/dts/xilinx/Makefile
@@ -22,11 +22,10 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA.dtb
 
 zynqmp-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revA.dtb
 zynqmp-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revB.dtb
 zynqmp-smk-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revA.dtb
 zynqmp-smk-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
-
-zynqmp-sm-k26-revA-sck-kr-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
-zynqmp-sm-k26-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
-zynqmp-smk-k26-revA-sck-kr-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
-zynqmp-smk-k26-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revB.dtb
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index ae1b9b2bdbee..92f4190d564d 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -21,57 +21,57 @@
 /dts-v1/;
 /plugin/;
 
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	/* u14 - 0x40 - ina260 */
-	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-
-&amba {
-	si5332_0: si5332_0 { /* u17 */
+&{/} {
+	si5332_0: si5332-0 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <125000000>;
 	};
 
-	si5332_1: si5332_1 { /* u17 */
+	si5332_1: si5332-1 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	si5332_2: si5332_2 { /* u17 */
+	si5332_2: si5332-2 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 	};
 
-	si5332_3: si5332_3 { /* u17 */
+	si5332_3: si5332-3 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
 
-	si5332_4: si5332_4 { /* u17 */
+	si5332_4: si5332-4 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5332_5: si5332_5 { /* u17 */
+	si5332_5: si5332-5 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
 };
 
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
 /* DP/USB 3.0 and SATA */
 &psgtr {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index b59e48be6465..f88b71f5b07a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -16,58 +16,58 @@
 /dts-v1/;
 /plugin/;
 
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	/* u14 - 0x40 - ina260 */
-	/* u43 - 0x2d - usb5744 */
-	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-
-&amba {
-	si5332_0: si5332_0 { /* u17 */
+&{/} {
+	si5332_0: si5332-0 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <125000000>;
 	};
 
-	si5332_1: si5332_1 { /* u17 */
+	si5332_1: si5332-1 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	si5332_2: si5332_2 { /* u17 */
+	si5332_2: si5332-2 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 	};
 
-	si5332_3: si5332_3 { /* u17 */
+	si5332_3: si5332-3 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
 
-	si5332_4: si5332_4 { /* u17 */
+	si5332_4: si5332-4 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5332_5: si5332_5 { /* u17 */
+	si5332_5: si5332-5 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
 };
 
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u43 - 0x2d - usb5744 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
 /* DP/USB 3.0 */
 &psgtr {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index c4774a42d5fc..51622896b1b1 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -131,9 +131,7 @@
 &qspi { /* MIO 0-5 - U143 */
 	status = "okay";
 	spi_flash: flash@0 { /* MT25QU512A */
-		compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */
-		#address-cells = <1>;
-		#size-cells = <1>;
+		compatible = "jedec,spi-nor"; /* 64MB */
 		reg = <0>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
@@ -222,9 +220,9 @@
 				label = "Secure OS Storage";
 				reg = <0x2280000 0x20000>; /* 128KB */
 			};
-			partition@22A0000 {
+			partition@22a0000 {
 				label = "User";
-				reg = <0x22A0000 0x1d60000>; /* 29.375 MB */
+				reg = <0x22a0000 0x1d60000>; /* 29.375 MB */
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
index e821d55d8d5a..73491626e01e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -98,8 +98,12 @@
 	phy-mode = "rgmii-id";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem3_default>;
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index b59e11316b4b..f767708fb50d 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -91,12 +91,16 @@
 	phy-mode = "rgmii-id";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem2_default>;
-	phy0: ethernet-phy@5 {
-		reg = <5>;
-		ti,rx-internal-delay = <0x8>;
-		ti,tx-internal-delay = <0xa>;
-		ti,fifo-depth = <0x1>;
-		ti,dp83867-rxctrl-strap-quirk;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@5 {
+			reg = <5>;
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
index 38b0a312171b..f553b317e6b2 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
@@ -88,8 +88,12 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: ethernet-phy@0 { /* VSC8211 */
-		reg = <0>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 { /* VSC8211 */
+			reg = <0>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
index 6636e76545a5..6ec1d9813973 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
@@ -116,17 +116,21 @@
 	status = "okay";
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy0>;
-	ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
-		reg = <0>;
-	};
-	ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
-		reg = <7>;
-	};
-	ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
-		reg = <3>;
-	};
-	ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
-		reg = <8>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
+			reg = <0>;
+		};
+		ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
+			reg = <7>;
+		};
+		ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
+			reg = <3>;
+		};
+		ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
+			reg = <8>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
index 0d2ea9c09a0a..b1857e17ab7e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
@@ -77,8 +77,12 @@
 	phy-mode = "rgmii-id";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem1_default>;
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index d0091d3cb764..52f998c22538 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -123,13 +123,13 @@
 		io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
 	};
 
-	si5335_0: si5335_0 { /* clk0_usb - u23 */
+	si5335_0: si5335-0 { /* clk0_usb - u23 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5335_1: si5335_1 { /* clk1_dp - u23 */
+	si5335_1: si5335-1 { /* clk1_dp - u23 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index b61fc99cd911..eaba466804bc 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -129,7 +129,7 @@
 		};
 	};
 
-	zynqmp_ipi: zynqmp_ipi {
+	zynqmp_ipi: zynqmp-ipi {
 		bootph-all;
 		compatible = "xlnx,zynqmp-ipi-mailbox";
 		interrupt-parent = <&gic>;
@@ -141,6 +141,7 @@
 
 		ipi_mailbox_pmu1: mailbox@ff9905c0 {
 			bootph-all;
+			compatible = "xlnx,zynqmp-ipi-dest-mailbox";
 			reg = <0x0 0xff9905c0 0x0 0x20>,
 			      <0x0 0xff9905e0 0x0 0x20>,
 			      <0x0 0xff990e80 0x0 0x20>,
@@ -194,12 +195,12 @@
 				mbox-names = "tx", "rx";
 			};
 
-			nvmem_firmware {
+			nvmem-firmware {
 				compatible = "xlnx,zynqmp-nvmem-fw";
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				soc_revision: soc_revision@0 {
+				soc_revision: soc-revision@0 {
 					reg = <0x0 0x4>;
 				};
 			};
@@ -584,8 +585,6 @@
 				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0b0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x874>;
 			power-domains = <&zynqmp_firmware PD_ETH_0>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>;
@@ -600,8 +599,6 @@
 				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0c0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x875>;
 			power-domains = <&zynqmp_firmware PD_ETH_1>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
@@ -616,8 +613,6 @@
 				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0d0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x876>;
 			power-domains = <&zynqmp_firmware PD_ETH_2>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>;
@@ -632,8 +627,6 @@
 				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0e0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x877>;
 			power-domains = <&zynqmp_firmware PD_ETH_3>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>;
diff --git a/arch/arm64/boot/install.sh b/arch/arm64/boot/install.sh
index 7399d706967a..9b7a09808a3d 100755
--- a/arch/arm64/boot/install.sh
+++ b/arch/arm64/boot/install.sh
@@ -17,7 +17,8 @@
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
 
-if [ "$(basename $2)" = "Image.gz" ]; then
+if [ "$(basename $2)" = "Image.gz" ] || [ "$(basename $2)" = "vmlinuz.efi" ]
+then
 # Compressed install
   echo "Installing compressed kernel"
   base=vmlinuz
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index b60aa1f89343..e6cf3e5d63c3 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -30,6 +30,9 @@ CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
+CONFIG_KEXEC=y
+CONFIG_KEXEC_FILE=y
+CONFIG_CRASH_DUMP=y
 CONFIG_ARCH_ACTIONS=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
@@ -77,9 +80,6 @@ CONFIG_ARM64_VA_BITS_48=y
 CONFIG_SCHED_MC=y
 CONFIG_SCHED_SMT=y
 CONFIG_NUMA=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_FILE=y
-CONFIG_CRASH_DUMP=y
 CONFIG_XEN=y
 CONFIG_COMPAT=y
 CONFIG_RANDOMIZE_BASE=y
@@ -180,8 +180,6 @@ CONFIG_NET_ACT_GATE=m
 CONFIG_QRTR_SMD=m
 CONFIG_QRTR_TUN=m
 CONFIG_CAN=m
-CONFIG_CAN_M_CAN=m
-CONFIG_CAN_M_CAN_PLATFORM=m
 CONFIG_BT=m
 CONFIG_BT_HIDP=m
 # CONFIG_BT_LE is not set
@@ -215,27 +213,27 @@ CONFIG_PCI_PASID=y
 CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=y
 CONFIG_PCI_AARDVARK=y
-CONFIG_PCI_TEGRA=y
-CONFIG_PCIE_RCAR_HOST=y
-CONFIG_PCIE_RCAR_EP=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_XGENE=y
 CONFIG_PCIE_ALTERA=y
 CONFIG_PCIE_ALTERA_MSI=y
+CONFIG_PCIE_BRCMSTB=m
 CONFIG_PCI_HOST_THUNDER_PEM=y
 CONFIG_PCI_HOST_THUNDER_ECAM=y
-CONFIG_PCIE_ROCKCHIP_HOST=m
+CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCIE_MEDIATEK_GEN3=m
-CONFIG_PCIE_BRCMSTB=m
+CONFIG_PCI_TEGRA=y
+CONFIG_PCIE_RCAR_HOST=y
+CONFIG_PCIE_RCAR_EP=y
+CONFIG_PCIE_ROCKCHIP_HOST=m
+CONFIG_PCI_XGENE=y
 CONFIG_PCI_IMX6_HOST=y
 CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_HISI=y
-CONFIG_PCIE_QCOM=y
-CONFIG_PCIE_ARMADA_8K=y
-CONFIG_PCIE_ROCKCHIP_DW_HOST=y
 CONFIG_PCIE_KIRIN=y
 CONFIG_PCIE_HISI_STB=y
+CONFIG_PCIE_ARMADA_8K=y
 CONFIG_PCIE_TEGRA194_HOST=m
+CONFIG_PCIE_QCOM=y
+CONFIG_PCIE_ROCKCHIP_DW_HOST=y
 CONFIG_PCIE_VISCONTI_HOST=y
 CONFIG_PCIE_LAYERSCAPE_GEN4=y
 CONFIG_PCI_ENDPOINT=y
@@ -252,9 +250,11 @@ CONFIG_ARM_SCPI_PROTOCOL=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_INTEL_STRATIX10_SERVICE=y
 CONFIG_INTEL_STRATIX10_RSU=m
+CONFIG_MTK_ADSP_IPC=m
 CONFIG_EFI_CAPSULE_LOADER=y
 CONFIG_IMX_SCU=y
-CONFIG_IMX_SCU_PD=y
+CONFIG_QCOM_QSEECOM=y
+CONFIG_QCOM_QSEECOM_UEFISECAPP=y
 CONFIG_GNSS=m
 CONFIG_GNSS_MTK_SERIAL=m
 CONFIG_MTD=y
@@ -276,15 +276,12 @@ CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_MTD_NAND_QCOM=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=m
-CONFIG_UBIFS_FS=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
 CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_NVME=m
 CONFIG_QCOM_COINCELL=m
 CONFIG_QCOM_FASTRPC=m
-CONFIG_BATTERY_QCOM_BATTMGR=m
-CONFIG_UCSI_PMIC_GLINK=m
 CONFIG_SRAM=y
 CONFIG_PCI_ENDPOINT_TEST=m
 CONFIG_EEPROM_AT24=m
@@ -368,6 +365,7 @@ CONFIG_SNI_NETSEC=y
 CONFIG_STMMAC_ETH=m
 CONFIG_DWMAC_TEGRA=m
 CONFIG_TI_K3_AM65_CPSW_NUSS=y
+CONFIG_TI_ICSSG_PRUETH=m
 CONFIG_QCOM_IPA=m
 CONFIG_MESON_GXL_PHY=m
 CONFIG_AQUANTIA_PHY=y
@@ -384,6 +382,8 @@ CONFIG_DP83869_PHY=m
 CONFIG_DP83TD510_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_CAN_FLEXCAN=m
+CONFIG_CAN_M_CAN=m
+CONFIG_CAN_M_CAN_PLATFORM=m
 CONFIG_CAN_RCAR=m
 CONFIG_CAN_RCAR_CANFD=m
 CONFIG_CAN_MCP251XFD=m
@@ -448,6 +448,7 @@ CONFIG_SERIO_AMBAKMI=y
 CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_BCM2835AUX=y
@@ -574,9 +575,9 @@ CONFIG_PINCTRL_IMX8DXL=y
 CONFIG_PINCTRL_IMX8ULP=y
 CONFIG_PINCTRL_IMX93=y
 CONFIG_PINCTRL_MSM=y
-CONFIG_PINCTRL_IPQ8074=y
 CONFIG_PINCTRL_IPQ5018=y
 CONFIG_PINCTRL_IPQ5332=y
+CONFIG_PINCTRL_IPQ8074=y
 CONFIG_PINCTRL_IPQ6018=y
 CONFIG_PINCTRL_IPQ9574=y
 CONFIG_PINCTRL_MSM8916=y
@@ -588,34 +589,37 @@ CONFIG_PINCTRL_MSM8998=y
 CONFIG_PINCTRL_QCM2290=y
 CONFIG_PINCTRL_QCS404=y
 CONFIG_PINCTRL_QDF2XXX=y
-CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_PINCTRL_QDU1000=y
 CONFIG_PINCTRL_SA8775P=y
 CONFIG_PINCTRL_SC7180=y
 CONFIG_PINCTRL_SC7280=y
-CONFIG_PINCTRL_SC7280_LPASS_LPI=m
 CONFIG_PINCTRL_SC8180X=y
 CONFIG_PINCTRL_SC8280XP=y
 CONFIG_PINCTRL_SDM660=y
 CONFIG_PINCTRL_SDM670=y
 CONFIG_PINCTRL_SDM845=y
+CONFIG_PINCTRL_SDX75=y
+CONFIG_PINCTRL_SM4450=y
 CONFIG_PINCTRL_SM6115=y
-CONFIG_PINCTRL_SM6115_LPASS_LPI=m
 CONFIG_PINCTRL_SM6125=y
 CONFIG_PINCTRL_SM6350=y
 CONFIG_PINCTRL_SM6375=y
 CONFIG_PINCTRL_SM8150=y
 CONFIG_PINCTRL_SM8250=y
-CONFIG_PINCTRL_SM8250_LPASS_LPI=m
 CONFIG_PINCTRL_SM8350=y
-CONFIG_PINCTRL_SM8350_LPASS_LPI=m
 CONFIG_PINCTRL_SM8450=y
+CONFIG_PINCTRL_SM8550=y
+CONFIG_PINCTRL_SM8650=y
+CONFIG_PINCTRL_X1E80100=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_LPASS_LPI=m
+CONFIG_PINCTRL_SC7280_LPASS_LPI=m
+CONFIG_PINCTRL_SM6115_LPASS_LPI=m
+CONFIG_PINCTRL_SM8250_LPASS_LPI=m
+CONFIG_PINCTRL_SM8350_LPASS_LPI=m
 CONFIG_PINCTRL_SM8450_LPASS_LPI=m
 CONFIG_PINCTRL_SC8280XP_LPASS_LPI=m
-CONFIG_PINCTRL_SM8550=y
 CONFIG_PINCTRL_SM8550_LPASS_LPI=m
-CONFIG_PINCTRL_LPASS_LPI=m
-CONFIG_GPIO_AGGREGATOR=m
 CONFIG_GPIO_ALTERA=m
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
@@ -624,6 +628,7 @@ CONFIG_GPIO_MPC8XXX=y
 CONFIG_GPIO_MXC=y
 CONFIG_GPIO_PL061=y
 CONFIG_GPIO_RCAR=y
+CONFIG_GPIO_SYSCON=y
 CONFIG_GPIO_UNIPHIER=y
 CONFIG_GPIO_VISCONTI=y
 CONFIG_GPIO_WCD934X=m
@@ -635,7 +640,7 @@ CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_BD9571MWV=m
 CONFIG_GPIO_MAX77620=y
 CONFIG_GPIO_SL28CPLD=m
-CONFIG_GPIO_SYSCON=y
+CONFIG_GPIO_AGGREGATOR=m
 CONFIG_POWER_RESET_MSM=y
 CONFIG_POWER_RESET_QCOM_PON=m
 CONFIG_POWER_RESET_XGENE=y
@@ -643,6 +648,7 @@ CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
 CONFIG_SYSCON_REBOOT_MODE=y
 CONFIG_NVMEM_REBOOT_MODE=m
+CONFIG_BATTERY_QCOM_BATTMGR=m
 CONFIG_BATTERY_SBS=m
 CONFIG_BATTERY_BQ27XXX=y
 CONFIG_BATTERY_MAX17042=m
@@ -667,14 +673,16 @@ CONFIG_DEVFREQ_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
 CONFIG_IMX_SC_THERMAL=m
 CONFIG_IMX8MM_THERMAL=m
-CONFIG_QORIQ_THERMAL=m
 CONFIG_K3_THERMAL=m
+CONFIG_QORIQ_THERMAL=m
 CONFIG_SUN8I_THERMAL=y
 CONFIG_ROCKCHIP_THERMAL=m
 CONFIG_RCAR_THERMAL=y
 CONFIG_RCAR_GEN3_THERMAL=y
 CONFIG_RZG2L_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
+CONFIG_MTK_THERMAL=m
+CONFIG_MTK_LVTS_THERMAL=m
 CONFIG_BCM2711_THERMAL=m
 CONFIG_BCM2835_THERMAL=m
 CONFIG_BRCMSTB_THERMAL=m
@@ -694,6 +702,7 @@ CONFIG_ARM_SP805_WATCHDOG=y
 CONFIG_ARM_SBSA_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_DW_WATCHDOG=y
+CONFIG_K3_RTI_WATCHDOG=m
 CONFIG_SUNXI_WATCHDOG=m
 CONFIG_NPCM7XX_WATCHDOG=y
 CONFIG_IMX2_WDT=y
@@ -709,7 +718,6 @@ CONFIG_UNIPHIER_WATCHDOG=y
 CONFIG_PM8916_WATCHDOG=m
 CONFIG_BCM2835_WDT=y
 CONFIG_BCM7038_WDT=m
-CONFIG_K3_RTI_WATCHDOG=m
 CONFIG_MFD_ALTERA_SYSMGR=y
 CONFIG_MFD_BD9571MWV=y
 CONFIG_MFD_AXP20X_I2C=y
@@ -726,9 +734,9 @@ CONFIG_MFD_RK8XX_SPI=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_SL28CPLD=y
 CONFIG_RZ_MTU3=y
+CONFIG_MFD_TI_AM335X_TSCADC=m
 CONFIG_MFD_TPS65219=y
 CONFIG_MFD_TPS6594_I2C=m
-CONFIG_MFD_TI_AM335X_TSCADC=m
 CONFIG_MFD_ROHM_BD718XX=y
 CONFIG_MFD_WCD934X=m
 CONFIG_MFD_KHADAS_MCU=m
@@ -737,6 +745,7 @@ CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_BD718XX=y
 CONFIG_REGULATOR_BD9571MWV=y
 CONFIG_REGULATOR_CROS_EC=y
+CONFIG_REGULATOR_DA9211=m
 CONFIG_REGULATOR_FAN53555=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_HI6421V530=y
@@ -783,6 +792,7 @@ CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SDR_PLATFORM_DRIVERS=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_CADENCE_CSI2RX=m
 CONFIG_VIDEO_MEDIATEK_JPEG=m
 CONFIG_VIDEO_MEDIATEK_VCODEC=m
 CONFIG_VIDEO_IMX7_CSI=m
@@ -804,6 +814,7 @@ CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
 CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
 CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
 CONFIG_VIDEO_SUN6I_CSI=m
+CONFIG_VIDEO_TI_J721E_CSI2RX=m
 CONFIG_VIDEO_HANTRO=m
 CONFIG_VIDEO_IMX219=m
 CONFIG_VIDEO_IMX412=m
@@ -860,6 +871,7 @@ CONFIG_DRM_SAMSUNG_DSIM=m
 CONFIG_DRM_SII902X=m
 CONFIG_DRM_SIMPLE_BRIDGE=m
 CONFIG_DRM_THINE_THC63LVD1024=m
+CONFIG_DRM_TOSHIBA_TC358767=m
 CONFIG_DRM_TOSHIBA_TC358768=m
 CONFIG_DRM_TI_TFP410=m
 CONFIG_DRM_TI_SN65DSI83=m
@@ -877,17 +889,19 @@ CONFIG_DRM_ETNAVIV=m
 CONFIG_DRM_HISI_HIBMC=m
 CONFIG_DRM_HISI_KIRIN=m
 CONFIG_DRM_MEDIATEK=m
+CONFIG_DRM_MEDIATEK_DP=m
 CONFIG_DRM_MEDIATEK_HDMI=m
 CONFIG_DRM_MXSFB=m
-CONFIG_DRM_MESON=m
 CONFIG_DRM_IMX_LCDIF=m
+CONFIG_DRM_MESON=m
 CONFIG_DRM_PL111=m
 CONFIG_DRM_LIMA=m
 CONFIG_DRM_PANFROST=m
 CONFIG_DRM_TIDSS=m
+CONFIG_DRM_POWERVR=m
 CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_EFI=y
+CONFIG_FB_MODE_HELPERS=y
 CONFIG_BACKLIGHT_PWM=m
 CONFIG_BACKLIGHT_LP855X=m
 CONFIG_LOGO=y
@@ -913,6 +927,8 @@ CONFIG_SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=m
 CONFIG_SND_SOC_MT8183_DA7219_MAX98357A=m
 CONFIG_SND_SOC_MT8192=m
 CONFIG_SND_SOC_MT8192_MT6359_RT1015_RT5682=m
+CONFIG_SND_SOC_MT8195=m
+CONFIG_SND_SOC_MT8195_MT6359=m
 CONFIG_SND_MESON_AXG_SOUND_CARD=m
 CONFIG_SND_MESON_GX_SOUND_CARD=m
 CONFIG_SND_SOC_QCOM=m
@@ -920,6 +936,7 @@ CONFIG_SND_SOC_APQ8016_SBC=m
 CONFIG_SND_SOC_MSM8996=m
 CONFIG_SND_SOC_SDM845=m
 CONFIG_SND_SOC_SM8250=m
+CONFIG_SND_SOC_SC8280XP=m
 CONFIG_SND_SOC_SC7180=m
 CONFIG_SND_SOC_SC7280=m
 CONFIG_SND_SOC_ROCKCHIP=m
@@ -930,6 +947,10 @@ CONFIG_SND_SOC_RK3399_GRU_SOUND=m
 CONFIG_SND_SOC_SAMSUNG=y
 CONFIG_SND_SOC_RCAR=m
 CONFIG_SND_SOC_RZ=m
+CONFIG_SND_SOC_SOF_TOPLEVEL=y
+CONFIG_SND_SOC_SOF_OF=y
+CONFIG_SND_SOC_SOF_MTK_TOPLEVEL=y
+CONFIG_SND_SOC_SOF_MT8195=m
 CONFIG_SND_SUN8I_CODEC=m
 CONFIG_SND_SUN8I_CODEC_ANALOG=m
 CONFIG_SND_SUN50I_CODEC_ANALOG=m
@@ -950,6 +971,7 @@ CONFIG_SND_SOC_TEGRA210_ADX=m
 CONFIG_SND_SOC_TEGRA210_MIXER=m
 CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD=m
 CONFIG_SND_SOC_DAVINCI_MCASP=m
+CONFIG_SND_SOC_J721E_EVM=m
 CONFIG_SND_SOC_AK4613=m
 CONFIG_SND_SOC_DA7213=m
 CONFIG_SND_SOC_ES7134=m
@@ -961,7 +983,6 @@ CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_PCM3168A_I2C=m
 CONFIG_SND_SOC_RK817=m
 CONFIG_SND_SOC_RT5640=m
-CONFIG_SND_SOC_J721E_EVM=m
 CONFIG_SND_SOC_RT5659=m
 CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
 CONFIG_SND_SOC_SIMPLE_MUX=m
@@ -977,6 +998,8 @@ CONFIG_SND_SOC_WM8960=m
 CONFIG_SND_SOC_WM8962=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_SOC_WSA881X=m
+CONFIG_SND_SOC_WSA883X=m
+CONFIG_SND_SOC_WSA884X=m
 CONFIG_SND_SOC_NAU8822=m
 CONFIG_SND_SOC_LPASS_WSA_MACRO=m
 CONFIG_SND_SOC_LPASS_VA_MACRO=m
@@ -1047,14 +1070,15 @@ CONFIG_TYPEC=m
 CONFIG_TYPEC_TCPM=m
 CONFIG_TYPEC_TCPCI=m
 CONFIG_TYPEC_FUSB302=m
-CONFIG_TYPEC_TPS6598X=m
-CONFIG_TYPEC_HD3SS3220=m
 CONFIG_TYPEC_QCOM_PMIC=m
 CONFIG_TYPEC_UCSI=m
-CONFIG_TYPEC_MUX_FSA4480=m
-CONFIG_TYPEC_MUX_NB7VPQ904M=m
 CONFIG_UCSI_CCG=m
+CONFIG_UCSI_PMIC_GLINK=m
+CONFIG_TYPEC_TPS6598X=m
+CONFIG_TYPEC_HD3SS3220=m
+CONFIG_TYPEC_MUX_FSA4480=m
 CONFIG_TYPEC_MUX_GPIO_SBU=m
+CONFIG_TYPEC_MUX_NB7VPQ904M=m
 CONFIG_TYPEC_DP_ALTMODE=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
@@ -1183,6 +1207,7 @@ CONFIG_CROS_EC=y
 CONFIG_CROS_EC_I2C=y
 CONFIG_CROS_EC_RPMSG=m
 CONFIG_CROS_EC_SPI=y
+CONFIG_CROS_KBD_LED_BACKLIGHT=m
 CONFIG_CROS_EC_CHARDEV=m
 CONFIG_COMMON_CLK_RK808=y
 CONFIG_COMMON_CLK_SCMI=y
@@ -1192,6 +1217,7 @@ CONFIG_COMMON_CLK_FSL_SAI=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_COMMON_CLK_PWM=y
 CONFIG_COMMON_CLK_RS9_PCIE=y
+CONFIG_COMMON_CLK_VC3=y
 CONFIG_COMMON_CLK_VC5=y
 CONFIG_COMMON_CLK_BD718XX=m
 CONFIG_CLK_RASPBERRYPI=m
@@ -1216,30 +1242,32 @@ CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y
 CONFIG_COMMON_CLK_MT8192_VDECSYS=y
 CONFIG_COMMON_CLK_MT8192_VENCSYS=y
 CONFIG_COMMON_CLK_QCOM=y
+CONFIG_CLK_X1E80100_GCC=y
 CONFIG_QCOM_A53PLL=y
 CONFIG_QCOM_CLK_APCS_MSM8916=y
 CONFIG_QCOM_CLK_APCC_MSM8996=y
 CONFIG_QCOM_CLK_SMD_RPM=y
 CONFIG_QCOM_CLK_RPMH=y
 CONFIG_IPQ_APSS_6018=y
-CONFIG_IPQ_GCC_5332=y
 CONFIG_IPQ_APSS_5018=y
 CONFIG_IPQ_GCC_5018=y
+CONFIG_IPQ_GCC_5332=y
 CONFIG_IPQ_GCC_6018=y
 CONFIG_IPQ_GCC_8074=y
 CONFIG_IPQ_GCC_9574=y
 CONFIG_MSM_GCC_8916=y
+CONFIG_MSM_MMCC_8994=m
 CONFIG_MSM_GCC_8994=y
 CONFIG_MSM_GCC_8996=y
-CONFIG_MSM_MMCC_8994=m
 CONFIG_MSM_MMCC_8996=m
-CONFIG_MSM_MMCC_8998=m
 CONFIG_MSM_GCC_8998=y
+CONFIG_MSM_MMCC_8998=m
 CONFIG_QCM_GCC_2290=y
 CONFIG_QCM_DISPCC_2290=m
 CONFIG_QCS_GCC_404=y
-CONFIG_SA_GCC_8775P=y
+CONFIG_SC_CAMCC_8280XP=m
 CONFIG_SC_DISPCC_8280XP=m
+CONFIG_SA_GCC_8775P=y
 CONFIG_SA_GPUCC_8775P=m
 CONFIG_SC_GCC_7180=y
 CONFIG_SC_GCC_7280=y
@@ -1252,19 +1280,27 @@ CONFIG_SDM_GPUCC_845=y
 CONFIG_SDM_VIDEOCC_845=y
 CONFIG_SDM_DISPCC_845=y
 CONFIG_SDM_LPASSCC_845=m
+CONFIG_SDX_GCC_75=y
 CONFIG_SM_CAMCC_8250=m
 CONFIG_SM_DISPCC_6115=m
 CONFIG_SM_DISPCC_8250=y
 CONFIG_SM_DISPCC_8450=m
 CONFIG_SM_DISPCC_8550=m
+CONFIG_SM_DISPCC_8650=m
+CONFIG_SM_GCC_4450=y
 CONFIG_SM_GCC_6115=y
 CONFIG_SM_GCC_8350=y
 CONFIG_SM_GCC_8450=y
 CONFIG_SM_GCC_8550=y
-CONFIG_SM_TCSRCC_8550=y
+CONFIG_SM_GCC_8650=y
 CONFIG_SM_GPUCC_6115=m
 CONFIG_SM_GPUCC_8150=y
 CONFIG_SM_GPUCC_8250=y
+CONFIG_SM_GPUCC_8450=m
+CONFIG_SM_GPUCC_8550=m
+CONFIG_SM_GPUCC_8650=m
+CONFIG_SM_TCSRCC_8550=y
+CONFIG_SM_TCSRCC_8650=y
 CONFIG_SM_VIDEOCC_8250=y
 CONFIG_QCOM_HFPLL=y
 CONFIG_CLK_GFM_LPASS_SM8250=m
@@ -1279,6 +1315,7 @@ CONFIG_OMAP2PLUS_MBOX=m
 CONFIG_PLATFORM_MHU=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_QCOM_APCS_IPC=y
+CONFIG_MTK_ADSP_MBOX=m
 CONFIG_QCOM_IPCC=y
 CONFIG_ROCKCHIP_IOMMU=y
 CONFIG_TEGRA_IOMMU_SMMU=y
@@ -1288,14 +1325,14 @@ CONFIG_MTK_IOMMU=y
 CONFIG_QCOM_IOMMU=y
 CONFIG_REMOTEPROC=y
 CONFIG_IMX_REMOTEPROC=y
-CONFIG_TI_K3_R5_REMOTEPROC=m
-CONFIG_TI_K3_DSP_REMOTEPROC=m
 CONFIG_MTK_SCP=m
 CONFIG_QCOM_Q6V5_ADSP=m
 CONFIG_QCOM_Q6V5_MSS=m
 CONFIG_QCOM_Q6V5_PAS=m
 CONFIG_QCOM_SYSMON=m
 CONFIG_QCOM_WCNSS_PIL=m
+CONFIG_TI_K3_DSP_REMOTEPROC=m
+CONFIG_TI_K3_R5_REMOTEPROC=m
 CONFIG_RPMSG_CHAR=m
 CONFIG_RPMSG_CTRL=m
 CONFIG_RPMSG_QCOM_GLINK_RPM=y
@@ -1304,8 +1341,6 @@ CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RPMSG_VIRTIO=y
 CONFIG_SOUNDWIRE=m
 CONFIG_SOUNDWIRE_QCOM=m
-CONFIG_OWL_PM_DOMAINS=y
-CONFIG_RASPBERRYPI_POWER=y
 CONFIG_FSL_DPAA=y
 CONFIG_FSL_MC_DPIO=y
 CONFIG_FSL_RCPM=y
@@ -1315,15 +1350,12 @@ CONFIG_MTK_PMIC_WRAP=y
 CONFIG_MTK_SVS=m
 CONFIG_QCOM_AOSS_QMP=y
 CONFIG_QCOM_COMMAND_DB=y
-CONFIG_QCOM_CPR=y
 CONFIG_QCOM_GENI_SE=y
 CONFIG_QCOM_LLCC=m
 CONFIG_QCOM_OCMEM=m
 CONFIG_QCOM_PMIC_GLINK=m
 CONFIG_QCOM_RMTFS_MEM=m
 CONFIG_QCOM_RPMH=y
-CONFIG_QCOM_RPMHPD=y
-CONFIG_QCOM_RPMPD=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
@@ -1355,14 +1387,20 @@ CONFIG_ARCH_R9A07G054=y
 CONFIG_ARCH_R9A08G045=y
 CONFIG_ARCH_R9A09G011=y
 CONFIG_ROCKCHIP_IODOMAIN=y
-CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
 CONFIG_ARCH_TEGRA_186_SOC=y
 CONFIG_ARCH_TEGRA_194_SOC=y
 CONFIG_ARCH_TEGRA_234_SOC=y
-CONFIG_TI_SCI_PM_DOMAINS=y
 CONFIG_TI_PRUSS=m
+CONFIG_OWL_PM_DOMAINS=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_IMX_SCU_PD=y
+CONFIG_QCOM_CPR=y
+CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RPMPD=y
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+CONFIG_TI_SCI_PM_DOMAINS=y
 CONFIG_ARM_IMX_BUS_DEVFREQ=y
 CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m
 CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m
@@ -1421,6 +1459,7 @@ CONFIG_PHY_XGENE=y
 CONFIG_PHY_CAN_TRANSCEIVER=m
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_CADENCE_TORRENT=m
+CONFIG_PHY_CADENCE_DPHY_RX=m
 CONFIG_PHY_CADENCE_SIERRA=m
 CONFIG_PHY_MIXEL_MIPI_DPHY=m
 CONFIG_PHY_FSL_IMX8M_PCIE=y
@@ -1430,17 +1469,17 @@ CONFIG_PHY_HISI_INNO_USB2=y
 CONFIG_PHY_MVEBU_CP110_COMPHY=y
 CONFIG_PHY_MTK_TPHY=y
 CONFIG_PHY_QCOM_EDP=m
-CONFIG_PHY_QCOM_EUSB2_REPEATER=m
 CONFIG_PHY_QCOM_PCIE2=m
 CONFIG_PHY_QCOM_QMP=m
 CONFIG_PHY_QCOM_QUSB2=m
 CONFIG_PHY_QCOM_SNPS_EUSB2=m
+CONFIG_PHY_QCOM_EUSB2_REPEATER=m
+CONFIG_PHY_QCOM_M31_USB=m
 CONFIG_PHY_QCOM_USB_HS=m
 CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
 CONFIG_PHY_QCOM_USB_HS_28NM=m
 CONFIG_PHY_QCOM_USB_SS=m
 CONFIG_PHY_QCOM_SGMII_ETH=m
-CONFIG_PHY_QCOM_M31_USB=m
 CONFIG_PHY_R8A779F0_ETHERNET_SERDES=y
 CONFIG_PHY_RCAR_GEN3_PCIE=y
 CONFIG_PHY_RCAR_GEN3_USB2=y
@@ -1462,7 +1501,6 @@ CONFIG_PHY_J721E_WIZ=m
 CONFIG_ARM_CCI_PMU=m
 CONFIG_ARM_CCN=m
 CONFIG_ARM_CMN=m
-CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU=m
 CONFIG_ARM_SMMU_V3_PMU=m
 CONFIG_ARM_DSU_PMU=m
 CONFIG_FSL_IMX8_DDR_PMU=m
@@ -1471,6 +1509,7 @@ CONFIG_QCOM_L3_PMU=y
 CONFIG_ARM_SPE_PMU=m
 CONFIG_ARM_DMC620_PMU=m
 CONFIG_HISI_PMU=y
+CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU=m
 CONFIG_MESON_DDR_PMU=m
 CONFIG_NVMEM_LAYOUT_SL28_VPD=m
 CONFIG_NVMEM_IMX_OCOTP=y
@@ -1519,11 +1558,14 @@ CONFIG_INTERCONNECT_QCOM_SC7280=y
 CONFIG_INTERCONNECT_QCOM_SC8180X=y
 CONFIG_INTERCONNECT_QCOM_SC8280XP=y
 CONFIG_INTERCONNECT_QCOM_SDM845=y
+CONFIG_INTERCONNECT_QCOM_SDX75=y
 CONFIG_INTERCONNECT_QCOM_SM8150=m
 CONFIG_INTERCONNECT_QCOM_SM8250=m
 CONFIG_INTERCONNECT_QCOM_SM8350=m
 CONFIG_INTERCONNECT_QCOM_SM8450=y
 CONFIG_INTERCONNECT_QCOM_SM8550=y
+CONFIG_INTERCONNECT_QCOM_SM8650=y
+CONFIG_INTERCONNECT_QCOM_X1E80100=y
 CONFIG_COUNTER=m
 CONFIG_RZ_MTU3_CNT=m
 CONFIG_HTE=y
@@ -1546,6 +1588,7 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_EFIVAR_FS=y
+CONFIG_UBIFS_FS=m
 CONFIG_SQUASHFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig
index 6d06b448a66e..eb7b423ba463 100644
--- a/arch/arm64/crypto/Kconfig
+++ b/arch/arm64/crypto/Kconfig
@@ -231,7 +231,7 @@ config CRYPTO_SM4_ARM64_CE
 	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_SM4_ARM64_CE_BLK
-	tristate "Ciphers: SM4, modes: ECB/CBC/CFB/CTR/XTS (ARMv8 Crypto Extensions)"
+	tristate "Ciphers: SM4, modes: ECB/CBC/CTR/XTS (ARMv8 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_SM4
@@ -240,7 +240,6 @@ config CRYPTO_SM4_ARM64_CE_BLK
 	  with block cipher modes:
 	  - ECB (Electronic Codebook) mode (NIST SP800-38A)
 	  - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
-	  - CFB (Cipher Feedback) mode (NIST SP800-38A)
 	  - CTR (Counter) mode (NIST SP800-38A)
 	  - XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E
 	    and IEEE 1619)
@@ -250,7 +249,7 @@ config CRYPTO_SM4_ARM64_CE_BLK
 	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_SM4_ARM64_NEON_BLK
-	tristate "Ciphers: SM4, modes: ECB/CBC/CFB/CTR (NEON)"
+	tristate "Ciphers: SM4, modes: ECB/CBC/CTR (NEON)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_SM4
@@ -259,7 +258,6 @@ config CRYPTO_SM4_ARM64_NEON_BLK
 	  with block cipher modes:
 	  - ECB (Electronic Codebook) mode (NIST SP800-38A)
 	  - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
-	  - CFB (Cipher Feedback) mode (NIST SP800-38A)
 	  - CTR (Counter) mode (NIST SP800-38A)
 
 	  Architecture: arm64 using:
diff --git a/arch/arm64/crypto/aes-neonbs-glue.c b/arch/arm64/crypto/aes-neonbs-glue.c
index bac4cabef607..467ac2f768ac 100644
--- a/arch/arm64/crypto/aes-neonbs-glue.c
+++ b/arch/arm64/crypto/aes-neonbs-glue.c
@@ -227,8 +227,19 @@ static int ctr_encrypt(struct skcipher_request *req)
 			src += blocks * AES_BLOCK_SIZE;
 		}
 		if (nbytes && walk.nbytes == walk.total) {
+			u8 buf[AES_BLOCK_SIZE];
+			u8 *d = dst;
+
+			if (unlikely(nbytes < AES_BLOCK_SIZE))
+				src = dst = memcpy(buf + sizeof(buf) - nbytes,
+						   src, nbytes);
+
 			neon_aes_ctr_encrypt(dst, src, ctx->enc, ctx->key.rounds,
 					     nbytes, walk.iv);
+
+			if (unlikely(nbytes < AES_BLOCK_SIZE))
+				memcpy(d, dst, nbytes);
+
 			nbytes = 0;
 		}
 		kernel_neon_end();
diff --git a/arch/arm64/crypto/sm4-ce-core.S b/arch/arm64/crypto/sm4-ce-core.S
index 877b80c54a0d..1f3625c2c67e 100644
--- a/arch/arm64/crypto/sm4-ce-core.S
+++ b/arch/arm64/crypto/sm4-ce-core.S
@@ -403,164 +403,6 @@ SYM_FUNC_START(sm4_ce_cbc_cts_dec)
 SYM_FUNC_END(sm4_ce_cbc_cts_dec)
 
 .align 3
-SYM_FUNC_START(sm4_ce_cfb_enc)
-	/* input:
-	 *   x0: round key array, CTX
-	 *   x1: dst
-	 *   x2: src
-	 *   x3: iv (big endian, 128 bit)
-	 *   w4: nblocks
-	 */
-	SM4_PREPARE(x0)
-
-	ld1		{RIV.16b}, [x3]
-
-.Lcfb_enc_loop_4x:
-	cmp		w4, #4
-	blt		.Lcfb_enc_loop_1x
-
-	sub		w4, w4, #4
-
-	ld1		{v0.16b-v3.16b}, [x2], #64
-
-	rev32		v8.16b, RIV.16b
-	SM4_CRYPT_BLK_BE(v8)
-	eor		v0.16b, v0.16b, v8.16b
-
-	rev32		v8.16b, v0.16b
-	SM4_CRYPT_BLK_BE(v8)
-	eor		v1.16b, v1.16b, v8.16b
-
-	rev32		v8.16b, v1.16b
-	SM4_CRYPT_BLK_BE(v8)
-	eor		v2.16b, v2.16b, v8.16b
-
-	rev32		v8.16b, v2.16b
-	SM4_CRYPT_BLK_BE(v8)
-	eor		v3.16b, v3.16b, v8.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-	mov		RIV.16b, v3.16b
-
-	cbz		w4, .Lcfb_enc_end
-	b		.Lcfb_enc_loop_4x
-
-.Lcfb_enc_loop_1x:
-	sub		w4, w4, #1
-
-	ld1		{v0.16b}, [x2], #16
-
-	SM4_CRYPT_BLK(RIV)
-	eor		RIV.16b, RIV.16b, v0.16b
-
-	st1		{RIV.16b}, [x1], #16
-
-	cbnz		w4, .Lcfb_enc_loop_1x
-
-.Lcfb_enc_end:
-	/* store new IV */
-	st1		{RIV.16b}, [x3]
-
-	ret
-SYM_FUNC_END(sm4_ce_cfb_enc)
-
-.align 3
-SYM_FUNC_START(sm4_ce_cfb_dec)
-	/* input:
-	 *   x0: round key array, CTX
-	 *   x1: dst
-	 *   x2: src
-	 *   x3: iv (big endian, 128 bit)
-	 *   w4: nblocks
-	 */
-	SM4_PREPARE(x0)
-
-	ld1		{RIV.16b}, [x3]
-
-.Lcfb_dec_loop_8x:
-	sub		w4, w4, #8
-	tbnz		w4, #31, .Lcfb_dec_4x
-
-	ld1		{v0.16b-v3.16b}, [x2], #64
-	ld1		{v4.16b-v7.16b}, [x2], #64
-
-	rev32		v8.16b, RIV.16b
-	rev32		v9.16b, v0.16b
-	rev32		v10.16b, v1.16b
-	rev32		v11.16b, v2.16b
-	rev32		v12.16b, v3.16b
-	rev32		v13.16b, v4.16b
-	rev32		v14.16b, v5.16b
-	rev32		v15.16b, v6.16b
-
-	SM4_CRYPT_BLK8_BE(v8, v9, v10, v11, v12, v13, v14, v15)
-
-	mov		RIV.16b, v7.16b
-
-	eor		v0.16b, v0.16b, v8.16b
-	eor		v1.16b, v1.16b, v9.16b
-	eor		v2.16b, v2.16b, v10.16b
-	eor		v3.16b, v3.16b, v11.16b
-	eor		v4.16b, v4.16b, v12.16b
-	eor		v5.16b, v5.16b, v13.16b
-	eor		v6.16b, v6.16b, v14.16b
-	eor		v7.16b, v7.16b, v15.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-	st1		{v4.16b-v7.16b}, [x1], #64
-
-	cbz		w4, .Lcfb_dec_end
-	b		.Lcfb_dec_loop_8x
-
-.Lcfb_dec_4x:
-	add		w4, w4, #8
-	cmp		w4, #4
-	blt		.Lcfb_dec_loop_1x
-
-	sub		w4, w4, #4
-
-	ld1		{v0.16b-v3.16b}, [x2], #64
-
-	rev32		v8.16b, RIV.16b
-	rev32		v9.16b, v0.16b
-	rev32		v10.16b, v1.16b
-	rev32		v11.16b, v2.16b
-
-	SM4_CRYPT_BLK4_BE(v8, v9, v10, v11)
-
-	mov		RIV.16b, v3.16b
-
-	eor		v0.16b, v0.16b, v8.16b
-	eor		v1.16b, v1.16b, v9.16b
-	eor		v2.16b, v2.16b, v10.16b
-	eor		v3.16b, v3.16b, v11.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-
-	cbz		w4, .Lcfb_dec_end
-
-.Lcfb_dec_loop_1x:
-	sub		w4, w4, #1
-
-	ld1		{v0.16b}, [x2], #16
-
-	SM4_CRYPT_BLK(RIV)
-
-	eor		RIV.16b, RIV.16b, v0.16b
-	st1		{RIV.16b}, [x1], #16
-
-	mov		RIV.16b, v0.16b
-
-	cbnz		w4, .Lcfb_dec_loop_1x
-
-.Lcfb_dec_end:
-	/* store new IV */
-	st1		{RIV.16b}, [x3]
-
-	ret
-SYM_FUNC_END(sm4_ce_cfb_dec)
-
-.align 3
 SYM_FUNC_START(sm4_ce_ctr_enc)
 	/* input:
 	 *   x0: round key array, CTX
diff --git a/arch/arm64/crypto/sm4-ce-glue.c b/arch/arm64/crypto/sm4-ce-glue.c
index 0a2d32ed3bde..43741bed874e 100644
--- a/arch/arm64/crypto/sm4-ce-glue.c
+++ b/arch/arm64/crypto/sm4-ce-glue.c
@@ -37,10 +37,6 @@ asmlinkage void sm4_ce_cbc_cts_enc(const u32 *rkey, u8 *dst, const u8 *src,
 				   u8 *iv, unsigned int nbytes);
 asmlinkage void sm4_ce_cbc_cts_dec(const u32 *rkey, u8 *dst, const u8 *src,
 				   u8 *iv, unsigned int nbytes);
-asmlinkage void sm4_ce_cfb_enc(const u32 *rkey, u8 *dst, const u8 *src,
-			       u8 *iv, unsigned int nblks);
-asmlinkage void sm4_ce_cfb_dec(const u32 *rkey, u8 *dst, const u8 *src,
-			       u8 *iv, unsigned int nblks);
 asmlinkage void sm4_ce_ctr_enc(const u32 *rkey, u8 *dst, const u8 *src,
 			       u8 *iv, unsigned int nblks);
 asmlinkage void sm4_ce_xts_enc(const u32 *rkey1, u8 *dst, const u8 *src,
@@ -56,7 +52,6 @@ asmlinkage void sm4_ce_mac_update(const u32 *rkey_enc, u8 *digest,
 EXPORT_SYMBOL(sm4_ce_expand_key);
 EXPORT_SYMBOL(sm4_ce_crypt_block);
 EXPORT_SYMBOL(sm4_ce_cbc_enc);
-EXPORT_SYMBOL(sm4_ce_cfb_enc);
 
 struct sm4_xts_ctx {
 	struct sm4_ctx key1;
@@ -280,90 +275,6 @@ static int sm4_cbc_cts_decrypt(struct skcipher_request *req)
 	return sm4_cbc_cts_crypt(req, false);
 }
 
-static int sm4_cfb_encrypt(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	while ((nbytes = walk.nbytes) > 0) {
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-		unsigned int nblks;
-
-		kernel_neon_begin();
-
-		nblks = BYTES2BLKS(nbytes);
-		if (nblks) {
-			sm4_ce_cfb_enc(ctx->rkey_enc, dst, src, walk.iv, nblks);
-			dst += nblks * SM4_BLOCK_SIZE;
-			src += nblks * SM4_BLOCK_SIZE;
-			nbytes -= nblks * SM4_BLOCK_SIZE;
-		}
-
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			u8 keystream[SM4_BLOCK_SIZE];
-
-			sm4_ce_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		kernel_neon_end();
-
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
-static int sm4_cfb_decrypt(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	while ((nbytes = walk.nbytes) > 0) {
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-		unsigned int nblks;
-
-		kernel_neon_begin();
-
-		nblks = BYTES2BLKS(nbytes);
-		if (nblks) {
-			sm4_ce_cfb_dec(ctx->rkey_enc, dst, src, walk.iv, nblks);
-			dst += nblks * SM4_BLOCK_SIZE;
-			src += nblks * SM4_BLOCK_SIZE;
-			nbytes -= nblks * SM4_BLOCK_SIZE;
-		}
-
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			u8 keystream[SM4_BLOCK_SIZE];
-
-			sm4_ce_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		kernel_neon_end();
-
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
 static int sm4_ctr_crypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
@@ -544,22 +455,6 @@ static struct skcipher_alg sm4_algs[] = {
 		.decrypt	= sm4_cbc_decrypt,
 	}, {
 		.base = {
-			.cra_name		= "cfb(sm4)",
-			.cra_driver_name	= "cfb-sm4-ce",
-			.cra_priority		= 400,
-			.cra_blocksize		= 1,
-			.cra_ctxsize		= sizeof(struct sm4_ctx),
-			.cra_module		= THIS_MODULE,
-		},
-		.min_keysize	= SM4_KEY_SIZE,
-		.max_keysize	= SM4_KEY_SIZE,
-		.ivsize		= SM4_BLOCK_SIZE,
-		.chunksize	= SM4_BLOCK_SIZE,
-		.setkey		= sm4_setkey,
-		.encrypt	= sm4_cfb_encrypt,
-		.decrypt	= sm4_cfb_decrypt,
-	}, {
-		.base = {
 			.cra_name		= "ctr(sm4)",
 			.cra_driver_name	= "ctr-sm4-ce",
 			.cra_priority		= 400,
@@ -869,12 +764,11 @@ static void __exit sm4_exit(void)
 module_cpu_feature_match(SM4, sm4_init);
 module_exit(sm4_exit);
 
-MODULE_DESCRIPTION("SM4 ECB/CBC/CFB/CTR/XTS using ARMv8 Crypto Extensions");
+MODULE_DESCRIPTION("SM4 ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions");
 MODULE_ALIAS_CRYPTO("sm4-ce");
 MODULE_ALIAS_CRYPTO("sm4");
 MODULE_ALIAS_CRYPTO("ecb(sm4)");
 MODULE_ALIAS_CRYPTO("cbc(sm4)");
-MODULE_ALIAS_CRYPTO("cfb(sm4)");
 MODULE_ALIAS_CRYPTO("ctr(sm4)");
 MODULE_ALIAS_CRYPTO("cts(cbc(sm4))");
 MODULE_ALIAS_CRYPTO("xts(sm4)");
diff --git a/arch/arm64/crypto/sm4-ce.h b/arch/arm64/crypto/sm4-ce.h
index 109c21b37590..1e235c4371eb 100644
--- a/arch/arm64/crypto/sm4-ce.h
+++ b/arch/arm64/crypto/sm4-ce.h
@@ -11,6 +11,3 @@ void sm4_ce_crypt_block(const u32 *rkey, u8 *dst, const u8 *src);
 
 void sm4_ce_cbc_enc(const u32 *rkey_enc, u8 *dst, const u8 *src,
 		    u8 *iv, unsigned int nblocks);
-
-void sm4_ce_cfb_enc(const u32 *rkey_enc, u8 *dst, const u8 *src,
-		    u8 *iv, unsigned int nblocks);
diff --git a/arch/arm64/crypto/sm4-neon-core.S b/arch/arm64/crypto/sm4-neon-core.S
index f295b4b7d70a..734dc7193610 100644
--- a/arch/arm64/crypto/sm4-neon-core.S
+++ b/arch/arm64/crypto/sm4-neon-core.S
@@ -438,119 +438,6 @@ SYM_FUNC_START(sm4_neon_cbc_dec)
 SYM_FUNC_END(sm4_neon_cbc_dec)
 
 .align 3
-SYM_FUNC_START(sm4_neon_cfb_dec)
-	/* input:
-	 *   x0: round key array, CTX
-	 *   x1: dst
-	 *   x2: src
-	 *   x3: iv (big endian, 128 bit)
-	 *   w4: nblocks
-	 */
-	SM4_PREPARE()
-
-	ld1		{v0.16b}, [x3]
-
-.Lcfb_dec_loop_8x:
-	sub		w4, w4, #8
-	tbnz		w4, #31, .Lcfb_dec_4x
-
-	ld1		{v1.16b-v3.16b}, [x2], #48
-	ld4		{v4.4s-v7.4s}, [x2]
-
-	transpose_4x4(v0, v1, v2, v3)
-
-	SM4_CRYPT_BLK8(v0, v1, v2, v3, v4, v5, v6, v7)
-
-	sub		x2, x2, #48
-	ld1		{RTMP0.16b-RTMP3.16b}, [x2], #64
-	ld1		{RTMP4.16b-RTMP7.16b}, [x2], #64
-
-	eor		v0.16b, v0.16b, RTMP0.16b
-	eor		v1.16b, v1.16b, RTMP1.16b
-	eor		v2.16b, v2.16b, RTMP2.16b
-	eor		v3.16b, v3.16b, RTMP3.16b
-	eor		v4.16b, v4.16b, RTMP4.16b
-	eor		v5.16b, v5.16b, RTMP5.16b
-	eor		v6.16b, v6.16b, RTMP6.16b
-	eor		v7.16b, v7.16b, RTMP7.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-	st1		{v4.16b-v7.16b}, [x1], #64
-
-	mov		v0.16b, RTMP7.16b
-
-	cbz		w4, .Lcfb_dec_end
-	b		.Lcfb_dec_loop_8x
-
-.Lcfb_dec_4x:
-	add		w4, w4, #8
-	cmp		w4, #4
-	blt		.Lcfb_dec_tail
-
-	sub		w4, w4, #4
-
-	ld1		{v4.16b-v7.16b}, [x2], #64
-
-	rev32		v0.16b, v0.16b		/* v0 is IV register */
-	rev32		v1.16b, v4.16b
-	rev32		v2.16b, v5.16b
-	rev32		v3.16b, v6.16b
-
-	transpose_4x4(v0, v1, v2, v3)
-
-	SM4_CRYPT_BLK4_BE(v0, v1, v2, v3)
-
-	eor		v0.16b, v0.16b, v4.16b
-	eor		v1.16b, v1.16b, v5.16b
-	eor		v2.16b, v2.16b, v6.16b
-	eor		v3.16b, v3.16b, v7.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-
-	mov		v0.16b, v7.16b
-
-	cbz		w4, .Lcfb_dec_end
-
-.Lcfb_dec_tail:
-	cmp		w4, #2
-	ld1		{v4.16b}, [x2], #16
-	blt		.Lcfb_dec_tail_load_done
-	ld1		{v5.16b}, [x2], #16
-	beq		.Lcfb_dec_tail_load_done
-	ld1		{v6.16b}, [x2], #16
-
-.Lcfb_dec_tail_load_done:
-	rev32		v0.16b, v0.16b		/* v0 is IV register */
-	rev32		v1.16b, v4.16b
-	rev32		v2.16b, v5.16b
-
-	transpose_4x4(v0, v1, v2, v3)
-
-	SM4_CRYPT_BLK4_BE(v0, v1, v2, v3)
-
-	cmp		w4, #2
-	eor		v0.16b, v0.16b, v4.16b
-	st1		{v0.16b}, [x1], #16
-	mov		v0.16b, v4.16b
-	blt		.Lcfb_dec_end
-
-	eor		v1.16b, v1.16b, v5.16b
-	st1		{v1.16b}, [x1], #16
-	mov		v0.16b, v5.16b
-	beq		.Lcfb_dec_end
-
-	eor		v2.16b, v2.16b, v6.16b
-	st1		{v2.16b}, [x1], #16
-	mov		v0.16b, v6.16b
-
-.Lcfb_dec_end:
-	/* store new IV */
-	st1		{v0.16b}, [x3]
-
-	ret
-SYM_FUNC_END(sm4_neon_cfb_dec)
-
-.align 3
 SYM_FUNC_START(sm4_neon_ctr_crypt)
 	/* input:
 	 *   x0: round key array, CTX
diff --git a/arch/arm64/crypto/sm4-neon-glue.c b/arch/arm64/crypto/sm4-neon-glue.c
index 7b19accf5c03..e3500aca2d18 100644
--- a/arch/arm64/crypto/sm4-neon-glue.c
+++ b/arch/arm64/crypto/sm4-neon-glue.c
@@ -22,8 +22,6 @@ asmlinkage void sm4_neon_crypt(const u32 *rkey, u8 *dst, const u8 *src,
 			       unsigned int nblocks);
 asmlinkage void sm4_neon_cbc_dec(const u32 *rkey_dec, u8 *dst, const u8 *src,
 				 u8 *iv, unsigned int nblocks);
-asmlinkage void sm4_neon_cfb_dec(const u32 *rkey_enc, u8 *dst, const u8 *src,
-				 u8 *iv, unsigned int nblocks);
 asmlinkage void sm4_neon_ctr_crypt(const u32 *rkey_enc, u8 *dst, const u8 *src,
 				   u8 *iv, unsigned int nblocks);
 
@@ -142,90 +140,6 @@ static int sm4_cbc_decrypt(struct skcipher_request *req)
 	return err;
 }
 
-static int sm4_cfb_encrypt(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	while ((nbytes = walk.nbytes) > 0) {
-		u8 keystream[SM4_BLOCK_SIZE];
-		const u8 *iv = walk.iv;
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-
-		while (nbytes >= SM4_BLOCK_SIZE) {
-			sm4_crypt_block(ctx->rkey_enc, keystream, iv);
-			crypto_xor_cpy(dst, src, keystream, SM4_BLOCK_SIZE);
-			iv = dst;
-			src += SM4_BLOCK_SIZE;
-			dst += SM4_BLOCK_SIZE;
-			nbytes -= SM4_BLOCK_SIZE;
-		}
-		if (iv != walk.iv)
-			memcpy(walk.iv, iv, SM4_BLOCK_SIZE);
-
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			sm4_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
-static int sm4_cfb_decrypt(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	while ((nbytes = walk.nbytes) > 0) {
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-		unsigned int nblocks;
-
-		nblocks = nbytes / SM4_BLOCK_SIZE;
-		if (nblocks) {
-			kernel_neon_begin();
-
-			sm4_neon_cfb_dec(ctx->rkey_enc, dst, src,
-					 walk.iv, nblocks);
-
-			kernel_neon_end();
-
-			dst += nblocks * SM4_BLOCK_SIZE;
-			src += nblocks * SM4_BLOCK_SIZE;
-			nbytes -= nblocks * SM4_BLOCK_SIZE;
-		}
-
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			u8 keystream[SM4_BLOCK_SIZE];
-
-			sm4_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
 static int sm4_ctr_crypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
@@ -303,22 +217,6 @@ static struct skcipher_alg sm4_algs[] = {
 		.decrypt	= sm4_cbc_decrypt,
 	}, {
 		.base = {
-			.cra_name		= "cfb(sm4)",
-			.cra_driver_name	= "cfb-sm4-neon",
-			.cra_priority		= 200,
-			.cra_blocksize		= 1,
-			.cra_ctxsize		= sizeof(struct sm4_ctx),
-			.cra_module		= THIS_MODULE,
-		},
-		.min_keysize	= SM4_KEY_SIZE,
-		.max_keysize	= SM4_KEY_SIZE,
-		.ivsize		= SM4_BLOCK_SIZE,
-		.chunksize	= SM4_BLOCK_SIZE,
-		.setkey		= sm4_setkey,
-		.encrypt	= sm4_cfb_encrypt,
-		.decrypt	= sm4_cfb_decrypt,
-	}, {
-		.base = {
 			.cra_name		= "ctr(sm4)",
 			.cra_driver_name	= "ctr-sm4-neon",
 			.cra_priority		= 200,
@@ -349,12 +247,11 @@ static void __exit sm4_exit(void)
 module_init(sm4_init);
 module_exit(sm4_exit);
 
-MODULE_DESCRIPTION("SM4 ECB/CBC/CFB/CTR using ARMv8 NEON");
+MODULE_DESCRIPTION("SM4 ECB/CBC/CTR using ARMv8 NEON");
 MODULE_ALIAS_CRYPTO("sm4-neon");
 MODULE_ALIAS_CRYPTO("sm4");
 MODULE_ALIAS_CRYPTO("ecb(sm4)");
 MODULE_ALIAS_CRYPTO("cbc(sm4)");
-MODULE_ALIAS_CRYPTO("cfb(sm4)");
 MODULE_ALIAS_CRYPTO("ctr(sm4)");
 MODULE_AUTHOR("Tianjia Zhang <tianjia.zhang@linux.alibaba.com>");
 MODULE_LICENSE("GPL v2");
diff --git a/arch/arm64/include/asm/alternative-macros.h b/arch/arm64/include/asm/alternative-macros.h
index 210bb43cff2c..d328f549b1a6 100644
--- a/arch/arm64/include/asm/alternative-macros.h
+++ b/arch/arm64/include/asm/alternative-macros.h
@@ -229,7 +229,7 @@ alternative_has_cap_likely(const unsigned long cpucap)
 	if (!cpucap_is_possible(cpucap))
 		return false;
 
-	asm_volatile_goto(
+	asm goto(
 	ALTERNATIVE_CB("b	%l[l_no]", %[cpucap], alt_cb_patch_nops)
 	:
 	: [cpucap] "i" (cpucap)
@@ -247,7 +247,7 @@ alternative_has_cap_unlikely(const unsigned long cpucap)
 	if (!cpucap_is_possible(cpucap))
 		return false;
 
-	asm_volatile_goto(
+	asm goto(
 	ALTERNATIVE("nop", "b	%l[l_yes]", %[cpucap])
 	:
 	: [cpucap] "i" (cpucap)
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index 376a980f2bad..513787e43329 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -12,7 +12,7 @@
 #ifndef __ASM_ASSEMBLER_H
 #define __ASM_ASSEMBLER_H
 
-#include <asm-generic/export.h>
+#include <linux/export.h>
 
 #include <asm/alternative.h>
 #include <asm/asm-bug.h>
@@ -760,32 +760,25 @@ alternative_endif
 .endm
 
 	/*
-	 * Check whether preempt/bh-disabled asm code should yield as soon as
-	 * it is able. This is the case if we are currently running in task
-	 * context, and either a softirq is pending, or the TIF_NEED_RESCHED
-	 * flag is set and re-enabling preemption a single time would result in
-	 * a preempt count of zero. (Note that the TIF_NEED_RESCHED flag is
-	 * stored negated in the top word of the thread_info::preempt_count
+	 * Check whether asm code should yield as soon as it is able. This is
+	 * the case if we are currently running in task context, and the
+	 * TIF_NEED_RESCHED flag is set. (Note that the TIF_NEED_RESCHED flag
+	 * is stored negated in the top word of the thread_info::preempt_count
 	 * field)
 	 */
-	.macro		cond_yield, lbl:req, tmp:req, tmp2:req
+	.macro		cond_yield, lbl:req, tmp:req, tmp2
+#ifdef CONFIG_PREEMPT_VOLUNTARY
 	get_current_task \tmp
 	ldr		\tmp, [\tmp, #TSK_TI_PREEMPT]
 	/*
 	 * If we are serving a softirq, there is no point in yielding: the
 	 * softirq will not be preempted no matter what we do, so we should
-	 * run to completion as quickly as we can.
+	 * run to completion as quickly as we can. The preempt_count field will
+	 * have BIT(SOFTIRQ_SHIFT) set in this case, so the zero check will
+	 * catch this case too.
 	 */
-	tbnz		\tmp, #SOFTIRQ_SHIFT, .Lnoyield_\@
-#ifdef CONFIG_PREEMPTION
-	sub		\tmp, \tmp, #PREEMPT_DISABLE_OFFSET
 	cbz		\tmp, \lbl
 #endif
-	adr_l		\tmp, irq_stat + IRQ_CPUSTAT_SOFTIRQ_PENDING
-	get_this_cpu_offset	\tmp2
-	ldr		w\tmp, [\tmp, \tmp2]
-	cbnz		w\tmp, \lbl	// yield on pending softirq in task context
-.Lnoyield_\@:
 	.endm
 
 /*
diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h
index ceb368d33bf4..06a4670bdb0b 100644
--- a/arch/arm64/include/asm/cache.h
+++ b/arch/arm64/include/asm/cache.h
@@ -58,7 +58,6 @@ static inline unsigned int arch_slab_minalign(void)
 #define CTR_L1IP(ctr)		SYS_FIELD_GET(CTR_EL0, L1Ip, ctr)
 
 #define ICACHEF_ALIASING	0
-#define ICACHEF_VPIPT		1
 extern unsigned long __icache_flags;
 
 /*
@@ -70,11 +69,6 @@ static inline int icache_is_aliasing(void)
 	return test_bit(ICACHEF_ALIASING, &__icache_flags);
 }
 
-static __always_inline int icache_is_vpipt(void)
-{
-	return test_bit(ICACHEF_VPIPT, &__icache_flags);
-}
-
 static inline u32 cache_type_cwg(void)
 {
 	return SYS_FIELD_GET(CTR_EL0, CWG, read_cpuid_cachetype());
diff --git a/arch/arm64/include/asm/cpu.h b/arch/arm64/include/asm/cpu.h
index f3034099fd95..b1e43f56ee46 100644
--- a/arch/arm64/include/asm/cpu.h
+++ b/arch/arm64/include/asm/cpu.h
@@ -38,7 +38,6 @@ struct cpuinfo_32bit {
 };
 
 struct cpuinfo_arm64 {
-	struct cpu	cpu;
 	struct kobject	kobj;
 	u64		reg_ctr;
 	u64		reg_cntfrq;
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index f6d416fe49b0..bd8d4ca81a48 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -83,7 +83,7 @@ struct arm64_ftr_bits {
  * to full-0 denotes that this field has no override
  *
  * A @mask field set to full-0 with the corresponding @val field set
- * to full-1 denotes thath this field has an invalid override.
+ * to full-1 denotes that this field has an invalid override.
  */
 struct arm64_ftr_override {
 	u64		val;
@@ -617,6 +617,7 @@ static inline bool id_aa64pfr1_mte(u64 pfr1)
 	return val >= ID_AA64PFR1_EL1_MTE_MTE2;
 }
 
+void __init setup_boot_cpu_features(void);
 void __init setup_system_features(void);
 void __init setup_user_features(void);
 
@@ -819,6 +820,11 @@ static inline bool system_supports_tlb_range(void)
 	return alternative_has_cap_unlikely(ARM64_HAS_TLB_RANGE);
 }
 
+static inline bool system_supports_lpa2(void)
+{
+	return cpus_have_final_cap(ARM64_HAS_LPA2);
+}
+
 int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt);
 bool try_emulate_mrs(struct pt_regs *regs, u32 isn);
 
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index 7c7493cb571f..52f076afeb96 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -61,6 +61,7 @@
 #define ARM_CPU_IMP_HISI		0x48
 #define ARM_CPU_IMP_APPLE		0x61
 #define ARM_CPU_IMP_AMPERE		0xC0
+#define ARM_CPU_IMP_MICROSOFT		0x6D
 
 #define ARM_CPU_PART_AEM_V8		0xD0F
 #define ARM_CPU_PART_FOUNDATION		0xD00
@@ -135,6 +136,8 @@
 
 #define AMPERE_CPU_PART_AMPERE1		0xAC3
 
+#define MICROSOFT_CPU_PART_AZURE_COBALT_100	0xD49 /* Based on r0p0 of ARM Neoverse N2 */
+
 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
 #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
 #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72)
@@ -193,6 +196,7 @@
 #define MIDR_APPLE_M2_BLIZZARD_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_BLIZZARD_MAX)
 #define MIDR_APPLE_M2_AVALANCHE_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_AVALANCHE_MAX)
 #define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1)
+#define MIDR_MICROSOFT_AZURE_COBALT_100 MIDR_CPU_MODEL(ARM_CPU_IMP_MICROSOFT, MICROSOFT_CPU_PART_AZURE_COBALT_100)
 
 /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */
 #define MIDR_FUJITSU_ERRATUM_010001		MIDR_FUJITSU_A64FX
diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
index ae35939f395b..353fe08546cf 100644
--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@@ -392,6 +392,21 @@ static inline bool esr_is_data_abort(unsigned long esr)
 	return ec == ESR_ELx_EC_DABT_LOW || ec == ESR_ELx_EC_DABT_CUR;
 }
 
+static inline bool esr_fsc_is_translation_fault(unsigned long esr)
+{
+	return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_FAULT;
+}
+
+static inline bool esr_fsc_is_permission_fault(unsigned long esr)
+{
+	return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_PERM;
+}
+
+static inline bool esr_fsc_is_access_flag_fault(unsigned long esr)
+{
+	return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_ACCESS;
+}
+
 const char *esr_get_class_string(unsigned long esr);
 #endif /* __ASSEMBLY */
 
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 50e5f25d3024..b67b89c54e1c 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -62,13 +62,13 @@ static inline void cpacr_restore(unsigned long cpacr)
  * When we defined the maximum SVE vector length we defined the ABI so
  * that the maximum vector length included all the reserved for future
  * expansion bits in ZCR rather than those just currently defined by
- * the architecture. While SME follows a similar pattern the fact that
- * it includes a square matrix means that any allocations that attempt
- * to cover the maximum potential vector length (such as happen with
- * the regset used for ptrace) end up being extremely large. Define
- * the much lower actual limit for use in such situations.
+ * the architecture.  Using this length to allocate worst size buffers
+ * results in excessively large allocations, and this effect is even
+ * more pronounced for SME due to ZA.  Define more suitable VLs for
+ * these situations.
  */
-#define SME_VQ_MAX	16
+#define ARCH_SVE_VQ_MAX ((ZCR_ELx_LEN_MASK >> ZCR_ELx_LEN_SHIFT) + 1)
+#define SME_VQ_MAX	((SMCR_ELx_LEN_MASK >> SMCR_ELx_LEN_SHIFT) + 1)
 
 struct task_struct;
 
@@ -386,6 +386,7 @@ extern void sme_alloc(struct task_struct *task, bool flush);
 extern unsigned int sme_get_vl(void);
 extern int sme_set_current_vl(unsigned long arg);
 extern int sme_get_current_vl(void);
+extern void sme_suspend_exit(void);
 
 /*
  * Return how many bytes of memory are required to store the full SME
@@ -421,6 +422,7 @@ static inline int sme_max_vl(void) { return 0; }
 static inline int sme_max_virtualisable_vl(void) { return 0; }
 static inline int sme_set_current_vl(unsigned long arg) { return -EINVAL; }
 static inline int sme_get_current_vl(void) { return -EINVAL; }
+static inline void sme_suspend_exit(void) { }
 
 static inline size_t sme_state_size(struct task_struct const *task)
 {
diff --git a/arch/arm64/include/asm/fpsimdmacros.h b/arch/arm64/include/asm/fpsimdmacros.h
index cdf6a35e3994..cda81d009c9b 100644
--- a/arch/arm64/include/asm/fpsimdmacros.h
+++ b/arch/arm64/include/asm/fpsimdmacros.h
@@ -242,14 +242,6 @@
 		| (\nx << 5)
 .endm
 
-/*
- * Zero the entire ZA array
- *	ZERO ZA
- */
-.macro zero_za
-	.inst 0xc00800ff
-.endm
-
 .macro __for from:req, to:req
 	.if (\from) == (\to)
 		_for__body %\from
diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h
index 50ce8b697ff3..e93548914c36 100644
--- a/arch/arm64/include/asm/irq.h
+++ b/arch/arm64/include/asm/irq.h
@@ -4,6 +4,8 @@
 
 #ifndef __ASSEMBLER__
 
+#include <linux/cpumask.h>
+
 #include <asm-generic/irq.h>
 
 void arch_trigger_cpumask_backtrace(const cpumask_t *mask, int exclude_cpu);
diff --git a/arch/arm64/include/asm/irq_work.h b/arch/arm64/include/asm/irq_work.h
index 81bbfa3a035b..a1020285ea75 100644
--- a/arch/arm64/include/asm/irq_work.h
+++ b/arch/arm64/include/asm/irq_work.h
@@ -2,8 +2,6 @@
 #ifndef __ASM_IRQ_WORK_H
 #define __ASM_IRQ_WORK_H
 
-extern void arch_irq_work_raise(void);
-
 static inline bool arch_irq_work_has_interrupt(void)
 {
 	return true;
diff --git a/arch/arm64/include/asm/jump_label.h b/arch/arm64/include/asm/jump_label.h
index 48ddc0f45d22..6aafbb789991 100644
--- a/arch/arm64/include/asm/jump_label.h
+++ b/arch/arm64/include/asm/jump_label.h
@@ -18,7 +18,7 @@
 static __always_inline bool arch_static_branch(struct static_key * const key,
 					       const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	nop					\n\t"
 		 "	.pushsection	__jump_table, \"aw\"	\n\t"
 		 "	.align		3			\n\t"
@@ -35,7 +35,7 @@ l_yes:
 static __always_inline bool arch_static_branch_jump(struct static_key * const key,
 						    const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	b		%l[l_yes]		\n\t"
 		 "	.pushsection	__jump_table, \"aw\"	\n\t"
 		 "	.align		3			\n\t"
diff --git a/arch/arm64/include/asm/kasan.h b/arch/arm64/include/asm/kasan.h
index 12d5f47f7dbe..7eefc525a9df 100644
--- a/arch/arm64/include/asm/kasan.h
+++ b/arch/arm64/include/asm/kasan.h
@@ -15,29 +15,9 @@
 
 #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
 
+asmlinkage void kasan_early_init(void);
 void kasan_init(void);
-
-/*
- * KASAN_SHADOW_START: beginning of the kernel virtual addresses.
- * KASAN_SHADOW_END: KASAN_SHADOW_START + 1/N of kernel virtual addresses,
- * where N = (1 << KASAN_SHADOW_SCALE_SHIFT).
- *
- * KASAN_SHADOW_OFFSET:
- * This value is used to map an address to the corresponding shadow
- * address by the following formula:
- *     shadow_addr = (address >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET
- *
- * (1 << (64 - KASAN_SHADOW_SCALE_SHIFT)) shadow addresses that lie in range
- * [KASAN_SHADOW_OFFSET, KASAN_SHADOW_END) cover all 64-bits of virtual
- * addresses. So KASAN_SHADOW_OFFSET should satisfy the following equation:
- *      KASAN_SHADOW_OFFSET = KASAN_SHADOW_END -
- *				(1ULL << (64 - KASAN_SHADOW_SCALE_SHIFT))
- */
-#define _KASAN_SHADOW_START(va)	(KASAN_SHADOW_END - (1UL << ((va) - KASAN_SHADOW_SCALE_SHIFT)))
-#define KASAN_SHADOW_START      _KASAN_SHADOW_START(vabits_actual)
-
 void kasan_copy_shadow(pgd_t *pgdir);
-asmlinkage void kasan_early_init(void);
 
 #else
 static inline void kasan_init(void) { }
diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h
index 85d26143faa5..83ddb14b95a5 100644
--- a/arch/arm64/include/asm/kernel-pgtable.h
+++ b/arch/arm64/include/asm/kernel-pgtable.h
@@ -37,27 +37,12 @@
 
 
 /*
- * If KASLR is enabled, then an offset K is added to the kernel address
- * space. The bottom 21 bits of this offset are zero to guarantee 2MB
- * alignment for PA and VA.
- *
- * For each pagetable level of the swapper, we know that the shift will
- * be larger than 21 (for the 4KB granule case we use section maps thus
- * the smallest shift is actually 30) thus there is the possibility that
- * KASLR can increase the number of pagetable entries by 1, so we make
- * room for this extra entry.
- *
- * Note KASLR cannot increase the number of required entries for a level
- * by more than one because it increments both the virtual start and end
- * addresses equally (the extra entry comes from the case where the end
- * address is just pushed over a boundary and the start address isn't).
+ * A relocatable kernel may execute from an address that differs from the one at
+ * which it was linked. In the worst case, its runtime placement may intersect
+ * with two adjacent PGDIR entries, which means that an additional page table
+ * may be needed at each subordinate level.
  */
-
-#ifdef CONFIG_RANDOMIZE_BASE
-#define EARLY_KASLR	(1)
-#else
-#define EARLY_KASLR	(0)
-#endif
+#define EXTRA_PAGE	__is_defined(CONFIG_RELOCATABLE)
 
 #define SPAN_NR_ENTRIES(vstart, vend, shift) \
 	((((vend) - 1) >> (shift)) - ((vstart) >> (shift)) + 1)
@@ -83,7 +68,7 @@
 			+ EARLY_PGDS((vstart), (vend), add) 	/* each PGDIR needs a next level page table */	\
 			+ EARLY_PUDS((vstart), (vend), add)	/* each PUD needs a next level page table */	\
 			+ EARLY_PMDS((vstart), (vend), add))	/* each PMD needs a next level page table */
-#define INIT_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR, _end, EARLY_KASLR))
+#define INIT_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR, _end, EXTRA_PAGE))
 
 /* the initial ID map may need two extra pages if it needs to be extended */
 #if VA_BITS < 48
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index b85f46a73e21..3c6f8ba1e479 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -108,6 +108,7 @@
 #define HCRX_HOST_FLAGS (HCRX_EL2_MSCEn | HCRX_EL2_TCR2En)
 
 /* TCR_EL2 Registers bits */
+#define TCR_EL2_DS		(1UL << 32)
 #define TCR_EL2_RES1		((1U << 31) | (1 << 23))
 #define TCR_EL2_TBI		(1 << 20)
 #define TCR_EL2_PS_SHIFT	16
@@ -122,6 +123,7 @@
 			 TCR_EL2_ORGN0_MASK | TCR_EL2_IRGN0_MASK | TCR_EL2_T0SZ_MASK)
 
 /* VTCR_EL2 Registers bits */
+#define VTCR_EL2_DS		TCR_EL2_DS
 #define VTCR_EL2_RES1		(1U << 31)
 #define VTCR_EL2_HD		(1 << 22)
 #define VTCR_EL2_HA		(1 << 21)
@@ -344,36 +346,47 @@
  * Once we get to a point where the two describe the same thing, we'll
  * merge the definitions. One day.
  */
-#define __HFGRTR_EL2_RES0	(GENMASK(63, 56) | GENMASK(53, 51))
+#define __HFGRTR_EL2_RES0	HFGxTR_EL2_RES0
 #define __HFGRTR_EL2_MASK	GENMASK(49, 0)
-#define __HFGRTR_EL2_nMASK	(GENMASK(58, 57) | GENMASK(55, 54) | BIT(50))
+#define __HFGRTR_EL2_nMASK	~(__HFGRTR_EL2_RES0 | __HFGRTR_EL2_MASK)
 
-#define __HFGWTR_EL2_RES0	(GENMASK(63, 56) | GENMASK(53, 51) |	\
-				 BIT(46) | BIT(42) | BIT(40) | BIT(28) | \
-				 GENMASK(26, 25) | BIT(21) | BIT(18) |	\
+/*
+ * The HFGWTR bits are a subset of HFGRTR bits. To ensure we don't miss any
+ * future additions, define __HFGWTR* macros relative to __HFGRTR* ones.
+ */
+#define __HFGRTR_ONLY_MASK	(BIT(46) | BIT(42) | BIT(40) | BIT(28) | \
+				 GENMASK(26, 25) | BIT(21) | BIT(18) | \
 				 GENMASK(15, 14) | GENMASK(10, 9) | BIT(2))
-#define __HFGWTR_EL2_MASK	GENMASK(49, 0)
-#define __HFGWTR_EL2_nMASK	(GENMASK(58, 57) | GENMASK(55, 54) | BIT(50))
-
-#define __HFGITR_EL2_RES0	GENMASK(63, 57)
-#define __HFGITR_EL2_MASK	GENMASK(54, 0)
-#define __HFGITR_EL2_nMASK	GENMASK(56, 55)
-
-#define __HDFGRTR_EL2_RES0	(BIT(49) | BIT(42) | GENMASK(39, 38) |	\
-				 GENMASK(21, 20) | BIT(8))
-#define __HDFGRTR_EL2_MASK	~__HDFGRTR_EL2_nMASK
-#define __HDFGRTR_EL2_nMASK	GENMASK(62, 59)
-
-#define __HDFGWTR_EL2_RES0	(BIT(63) | GENMASK(59, 58) | BIT(51) | BIT(47) | \
-				 BIT(43) | GENMASK(40, 38) | BIT(34) | BIT(30) | \
-				 BIT(22) | BIT(9) | BIT(6))
-#define __HDFGWTR_EL2_MASK	~__HDFGWTR_EL2_nMASK
-#define __HDFGWTR_EL2_nMASK	GENMASK(62, 60)
+#define __HFGWTR_EL2_RES0	(__HFGRTR_EL2_RES0 | __HFGRTR_ONLY_MASK)
+#define __HFGWTR_EL2_MASK	(__HFGRTR_EL2_MASK & ~__HFGRTR_ONLY_MASK)
+#define __HFGWTR_EL2_nMASK	~(__HFGWTR_EL2_RES0 | __HFGWTR_EL2_MASK)
+
+#define __HFGITR_EL2_RES0	HFGITR_EL2_RES0
+#define __HFGITR_EL2_MASK	(BIT(62) | BIT(60) | GENMASK(54, 0))
+#define __HFGITR_EL2_nMASK	~(__HFGITR_EL2_RES0 | __HFGITR_EL2_MASK)
+
+#define __HDFGRTR_EL2_RES0	HDFGRTR_EL2_RES0
+#define __HDFGRTR_EL2_MASK	(BIT(63) | GENMASK(58, 50) | GENMASK(48, 43) | \
+				 GENMASK(41, 40) | GENMASK(37, 22) | \
+				 GENMASK(19, 9) | GENMASK(7, 0))
+#define __HDFGRTR_EL2_nMASK	~(__HDFGRTR_EL2_RES0 | __HDFGRTR_EL2_MASK)
+
+#define __HDFGWTR_EL2_RES0	HDFGWTR_EL2_RES0
+#define __HDFGWTR_EL2_MASK	(GENMASK(57, 52) | GENMASK(50, 48) | \
+				 GENMASK(46, 44) | GENMASK(42, 41) | \
+				 GENMASK(37, 35) | GENMASK(33, 31) | \
+				 GENMASK(29, 23) | GENMASK(21, 10) | \
+				 GENMASK(8, 7) | GENMASK(5, 0))
+#define __HDFGWTR_EL2_nMASK	~(__HDFGWTR_EL2_RES0 | __HDFGWTR_EL2_MASK)
+
+#define __HAFGRTR_EL2_RES0	HAFGRTR_EL2_RES0
+#define __HAFGRTR_EL2_MASK	(GENMASK(49, 17) | GENMASK(4, 0))
+#define __HAFGRTR_EL2_nMASK	~(__HAFGRTR_EL2_RES0 | __HAFGRTR_EL2_MASK)
 
 /* Similar definitions for HCRX_EL2 */
-#define __HCRX_EL2_RES0		(GENMASK(63, 16) | GENMASK(13, 12))
-#define __HCRX_EL2_MASK		(0)
-#define __HCRX_EL2_nMASK	(GENMASK(15, 14) | GENMASK(4, 0))
+#define __HCRX_EL2_RES0         HCRX_EL2_RES0
+#define __HCRX_EL2_MASK		(BIT(6))
+#define __HCRX_EL2_nMASK	~(__HCRX_EL2_RES0 | __HCRX_EL2_MASK)
 
 /* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */
 #define HPFAR_MASK	(~UL(0xf))
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index 78a550537b67..b804fe832184 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -17,6 +17,7 @@
 #include <asm/esr.h>
 #include <asm/kvm_arm.h>
 #include <asm/kvm_hyp.h>
+#include <asm/kvm_nested.h>
 #include <asm/ptrace.h>
 #include <asm/cputype.h>
 #include <asm/virt.h>
@@ -54,11 +55,6 @@ void kvm_emulate_nested_eret(struct kvm_vcpu *vcpu);
 int kvm_inject_nested_sync(struct kvm_vcpu *vcpu, u64 esr_el2);
 int kvm_inject_nested_irq(struct kvm_vcpu *vcpu);
 
-static inline bool vcpu_has_feature(const struct kvm_vcpu *vcpu, int feature)
-{
-	return test_bit(feature, vcpu->kvm->arch.vcpu_features);
-}
-
 #if defined(__KVM_VHE_HYPERVISOR__) || defined(__KVM_NVHE_HYPERVISOR__)
 static __always_inline bool vcpu_el1_is_32bit(struct kvm_vcpu *vcpu)
 {
@@ -248,7 +244,7 @@ static inline bool __is_hyp_ctxt(const struct kvm_cpu_context *ctxt)
 
 static inline bool is_hyp_ctxt(const struct kvm_vcpu *vcpu)
 {
-	return __is_hyp_ctxt(&vcpu->arch.ctxt);
+	return vcpu_has_nv(vcpu) && __is_hyp_ctxt(&vcpu->arch.ctxt);
 }
 
 /*
@@ -404,14 +400,25 @@ static __always_inline u8 kvm_vcpu_trap_get_fault(const struct kvm_vcpu *vcpu)
 	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC;
 }
 
-static __always_inline u8 kvm_vcpu_trap_get_fault_type(const struct kvm_vcpu *vcpu)
+static inline
+bool kvm_vcpu_trap_is_permission_fault(const struct kvm_vcpu *vcpu)
 {
-	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC_TYPE;
+	return esr_fsc_is_permission_fault(kvm_vcpu_get_esr(vcpu));
 }
 
-static __always_inline u8 kvm_vcpu_trap_get_fault_level(const struct kvm_vcpu *vcpu)
+static inline
+bool kvm_vcpu_trap_is_translation_fault(const struct kvm_vcpu *vcpu)
 {
-	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC_LEVEL;
+	return esr_fsc_is_translation_fault(kvm_vcpu_get_esr(vcpu));
+}
+
+static inline
+u64 kvm_vcpu_trap_get_perm_fault_granule(const struct kvm_vcpu *vcpu)
+{
+	unsigned long esr = kvm_vcpu_get_esr(vcpu);
+
+	BUG_ON(!esr_fsc_is_permission_fault(esr));
+	return BIT(ARM64_HW_PGTABLE_LEVEL_SHIFT(esr & ESR_ELx_FSC_LEVEL));
 }
 
 static __always_inline bool kvm_vcpu_abt_issea(const struct kvm_vcpu *vcpu)
@@ -454,12 +461,7 @@ static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
 		 * first), then a permission fault to allow the flags
 		 * to be set.
 		 */
-		switch (kvm_vcpu_trap_get_fault_type(vcpu)) {
-		case ESR_ELx_FSC_PERM:
-			return true;
-		default:
-			return false;
-		}
+		return kvm_vcpu_trap_is_permission_fault(vcpu);
 	}
 
 	if (kvm_vcpu_trap_is_iabt(vcpu))
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 824f29f04916..21c57b812569 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -27,6 +27,7 @@
 #include <asm/fpsimd.h>
 #include <asm/kvm.h>
 #include <asm/kvm_asm.h>
+#include <asm/vncr_mapping.h>
 
 #define __KVM_HAVE_ARCH_INTC_INITIALIZED
 
@@ -306,6 +307,7 @@ struct kvm_arch {
 	 * Atomic access to multiple idregs are guarded by kvm_arch.config_lock.
 	 */
 #define IDREG_IDX(id)		(((sys_reg_CRm(id) - 1) << 3) | sys_reg_Op2(id))
+#define IDX_IDREG(idx)		sys_reg(3, 0, 0, ((idx) >> 3) + 1, (idx) & Op2_mask)
 #define IDREG(kvm, id)		((kvm)->arch.id_regs[IDREG_IDX(id)])
 #define KVM_ARM_ID_REG_NUM	(IDREG_IDX(sys_reg(3, 0, 0, 7, 7)) + 1)
 	u64 id_regs[KVM_ARM_ID_REG_NUM];
@@ -324,33 +326,33 @@ struct kvm_vcpu_fault_info {
 	u64 disr_el1;		/* Deferred [SError] Status Register */
 };
 
+/*
+ * VNCR() just places the VNCR_capable registers in the enum after
+ * __VNCR_START__, and the value (after correction) to be an 8-byte offset
+ * from the VNCR base. As we don't require the enum to be otherwise ordered,
+ * we need the terrible hack below to ensure that we correctly size the
+ * sys_regs array, no matter what.
+ *
+ * The __MAX__ macro has been lifted from Sean Eron Anderson's wonderful
+ * treasure trove of bit hacks:
+ * https://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
+ */
+#define __MAX__(x,y)	((x) ^ (((x) ^ (y)) & -((x) < (y))))
+#define VNCR(r)						\
+	__before_##r,					\
+	r = __VNCR_START__ + ((VNCR_ ## r) / 8),	\
+	__after_##r = __MAX__(__before_##r - 1, r)
+
 enum vcpu_sysreg {
 	__INVALID_SYSREG__,   /* 0 is reserved as an invalid value */
 	MPIDR_EL1,	/* MultiProcessor Affinity Register */
 	CLIDR_EL1,	/* Cache Level ID Register */
 	CSSELR_EL1,	/* Cache Size Selection Register */
-	SCTLR_EL1,	/* System Control Register */
-	ACTLR_EL1,	/* Auxiliary Control Register */
-	CPACR_EL1,	/* Coprocessor Access Control */
-	ZCR_EL1,	/* SVE Control */
-	TTBR0_EL1,	/* Translation Table Base Register 0 */
-	TTBR1_EL1,	/* Translation Table Base Register 1 */
-	TCR_EL1,	/* Translation Control Register */
-	TCR2_EL1,	/* Extended Translation Control Register */
-	ESR_EL1,	/* Exception Syndrome Register */
-	AFSR0_EL1,	/* Auxiliary Fault Status Register 0 */
-	AFSR1_EL1,	/* Auxiliary Fault Status Register 1 */
-	FAR_EL1,	/* Fault Address Register */
-	MAIR_EL1,	/* Memory Attribute Indirection Register */
-	VBAR_EL1,	/* Vector Base Address Register */
-	CONTEXTIDR_EL1,	/* Context ID Register */
 	TPIDR_EL0,	/* Thread ID, User R/W */
 	TPIDRRO_EL0,	/* Thread ID, User R/O */
 	TPIDR_EL1,	/* Thread ID, Privileged */
-	AMAIR_EL1,	/* Aux Memory Attribute Indirection Register */
 	CNTKCTL_EL1,	/* Timer Control Register (EL1) */
 	PAR_EL1,	/* Physical Address Register */
-	MDSCR_EL1,	/* Monitor Debug System Control Register */
 	MDCCINT_EL1,	/* Monitor Debug Comms Channel Interrupt Enable Reg */
 	OSLSR_EL1,	/* OS Lock Status Register */
 	DISR_EL1,	/* Deferred Interrupt Status Register */
@@ -381,26 +383,11 @@ enum vcpu_sysreg {
 	APGAKEYLO_EL1,
 	APGAKEYHI_EL1,
 
-	ELR_EL1,
-	SP_EL1,
-	SPSR_EL1,
-
-	CNTVOFF_EL2,
-	CNTV_CVAL_EL0,
-	CNTV_CTL_EL0,
-	CNTP_CVAL_EL0,
-	CNTP_CTL_EL0,
-
 	/* Memory Tagging Extension registers */
 	RGSR_EL1,	/* Random Allocation Tag Seed Register */
 	GCR_EL1,	/* Tag Control Register */
-	TFSR_EL1,	/* Tag Fault Status Register (EL1) */
 	TFSRE0_EL1,	/* Tag Fault Status Register (EL0) */
 
-	/* Permission Indirection Extension registers */
-	PIR_EL1,       /* Permission Indirection Register 1 (EL1) */
-	PIRE0_EL1,     /*  Permission Indirection Register 0 (EL1) */
-
 	/* 32bit specific registers. */
 	DACR32_EL2,	/* Domain Access Control Register */
 	IFSR32_EL2,	/* Instruction Fault Status Register */
@@ -408,21 +395,14 @@ enum vcpu_sysreg {
 	DBGVCR32_EL2,	/* Debug Vector Catch Register */
 
 	/* EL2 registers */
-	VPIDR_EL2,	/* Virtualization Processor ID Register */
-	VMPIDR_EL2,	/* Virtualization Multiprocessor ID Register */
 	SCTLR_EL2,	/* System Control Register (EL2) */
 	ACTLR_EL2,	/* Auxiliary Control Register (EL2) */
-	HCR_EL2,	/* Hypervisor Configuration Register */
 	MDCR_EL2,	/* Monitor Debug Configuration Register (EL2) */
 	CPTR_EL2,	/* Architectural Feature Trap Register (EL2) */
-	HSTR_EL2,	/* Hypervisor System Trap Register */
 	HACR_EL2,	/* Hypervisor Auxiliary Control Register */
-	HCRX_EL2,	/* Extended Hypervisor Configuration Register */
 	TTBR0_EL2,	/* Translation Table Base Register 0 (EL2) */
 	TTBR1_EL2,	/* Translation Table Base Register 1 (EL2) */
 	TCR_EL2,	/* Translation Control Register (EL2) */
-	VTTBR_EL2,	/* Virtualization Translation Table Base Register */
-	VTCR_EL2,	/* Virtualization Translation Control Register */
 	SPSR_EL2,	/* EL2 saved program status register */
 	ELR_EL2,	/* EL2 exception link register */
 	AFSR0_EL2,	/* Auxiliary Fault Status Register 0 (EL2) */
@@ -435,19 +415,62 @@ enum vcpu_sysreg {
 	VBAR_EL2,	/* Vector Base Address Register (EL2) */
 	RVBAR_EL2,	/* Reset Vector Base Address Register */
 	CONTEXTIDR_EL2,	/* Context ID Register (EL2) */
-	TPIDR_EL2,	/* EL2 Software Thread ID Register */
 	CNTHCTL_EL2,	/* Counter-timer Hypervisor Control register */
 	SP_EL2,		/* EL2 Stack Pointer */
-	HFGRTR_EL2,
-	HFGWTR_EL2,
-	HFGITR_EL2,
-	HDFGRTR_EL2,
-	HDFGWTR_EL2,
 	CNTHP_CTL_EL2,
 	CNTHP_CVAL_EL2,
 	CNTHV_CTL_EL2,
 	CNTHV_CVAL_EL2,
 
+	__VNCR_START__,	/* Any VNCR-capable reg goes after this point */
+
+	VNCR(SCTLR_EL1),/* System Control Register */
+	VNCR(ACTLR_EL1),/* Auxiliary Control Register */
+	VNCR(CPACR_EL1),/* Coprocessor Access Control */
+	VNCR(ZCR_EL1),	/* SVE Control */
+	VNCR(TTBR0_EL1),/* Translation Table Base Register 0 */
+	VNCR(TTBR1_EL1),/* Translation Table Base Register 1 */
+	VNCR(TCR_EL1),	/* Translation Control Register */
+	VNCR(TCR2_EL1),	/* Extended Translation Control Register */
+	VNCR(ESR_EL1),	/* Exception Syndrome Register */
+	VNCR(AFSR0_EL1),/* Auxiliary Fault Status Register 0 */
+	VNCR(AFSR1_EL1),/* Auxiliary Fault Status Register 1 */
+	VNCR(FAR_EL1),	/* Fault Address Register */
+	VNCR(MAIR_EL1),	/* Memory Attribute Indirection Register */
+	VNCR(VBAR_EL1),	/* Vector Base Address Register */
+	VNCR(CONTEXTIDR_EL1),	/* Context ID Register */
+	VNCR(AMAIR_EL1),/* Aux Memory Attribute Indirection Register */
+	VNCR(MDSCR_EL1),/* Monitor Debug System Control Register */
+	VNCR(ELR_EL1),
+	VNCR(SP_EL1),
+	VNCR(SPSR_EL1),
+	VNCR(TFSR_EL1),	/* Tag Fault Status Register (EL1) */
+	VNCR(VPIDR_EL2),/* Virtualization Processor ID Register */
+	VNCR(VMPIDR_EL2),/* Virtualization Multiprocessor ID Register */
+	VNCR(HCR_EL2),	/* Hypervisor Configuration Register */
+	VNCR(HSTR_EL2),	/* Hypervisor System Trap Register */
+	VNCR(VTTBR_EL2),/* Virtualization Translation Table Base Register */
+	VNCR(VTCR_EL2),	/* Virtualization Translation Control Register */
+	VNCR(TPIDR_EL2),/* EL2 Software Thread ID Register */
+	VNCR(HCRX_EL2),	/* Extended Hypervisor Configuration Register */
+
+	/* Permission Indirection Extension registers */
+	VNCR(PIR_EL1),	 /* Permission Indirection Register 1 (EL1) */
+	VNCR(PIRE0_EL1), /*  Permission Indirection Register 0 (EL1) */
+
+	VNCR(HFGRTR_EL2),
+	VNCR(HFGWTR_EL2),
+	VNCR(HFGITR_EL2),
+	VNCR(HDFGRTR_EL2),
+	VNCR(HDFGWTR_EL2),
+	VNCR(HAFGRTR_EL2),
+
+	VNCR(CNTVOFF_EL2),
+	VNCR(CNTV_CVAL_EL0),
+	VNCR(CNTV_CTL_EL0),
+	VNCR(CNTP_CVAL_EL0),
+	VNCR(CNTP_CTL_EL0),
+
 	NR_SYS_REGS	/* Nothing after this line! */
 };
 
@@ -464,6 +487,9 @@ struct kvm_cpu_context {
 	u64 sys_regs[NR_SYS_REGS];
 
 	struct kvm_vcpu *__hyp_running_vcpu;
+
+	/* This pointer has to be 4kB aligned. */
+	u64 *vncr_array;
 };
 
 struct kvm_host_data {
@@ -826,8 +852,19 @@ struct kvm_vcpu_arch {
  * accessed by a running VCPU.  For example, for userspace access or
  * for system registers that are never context switched, but only
  * emulated.
+ *
+ * Don't bother with VNCR-based accesses in the nVHE code, it has no
+ * business dealing with NV.
  */
-#define __ctxt_sys_reg(c,r)	(&(c)->sys_regs[(r)])
+static inline u64 *__ctxt_sys_reg(const struct kvm_cpu_context *ctxt, int r)
+{
+#if !defined (__KVM_NVHE_HYPERVISOR__)
+	if (unlikely(cpus_have_final_cap(ARM64_HAS_NESTED_VIRT) &&
+		     r >= __VNCR_START__ && ctxt->vncr_array))
+		return &ctxt->vncr_array[r - __VNCR_START__];
+#endif
+	return (u64 *)&ctxt->sys_regs[r];
+}
 
 #define ctxt_sys_reg(c,r)	(*__ctxt_sys_reg(c,r))
 
@@ -871,6 +908,7 @@ static inline bool __vcpu_read_sys_reg_from_cpu(int reg, u64 *val)
 	case AMAIR_EL1:		*val = read_sysreg_s(SYS_AMAIR_EL12);	break;
 	case CNTKCTL_EL1:	*val = read_sysreg_s(SYS_CNTKCTL_EL12);	break;
 	case ELR_EL1:		*val = read_sysreg_s(SYS_ELR_EL12);	break;
+	case SPSR_EL1:		*val = read_sysreg_s(SYS_SPSR_EL12);	break;
 	case PAR_EL1:		*val = read_sysreg_par();		break;
 	case DACR32_EL2:	*val = read_sysreg_s(SYS_DACR32_EL2);	break;
 	case IFSR32_EL2:	*val = read_sysreg_s(SYS_IFSR32_EL2);	break;
@@ -915,6 +953,7 @@ static inline bool __vcpu_write_sys_reg_to_cpu(u64 val, int reg)
 	case AMAIR_EL1:		write_sysreg_s(val, SYS_AMAIR_EL12);	break;
 	case CNTKCTL_EL1:	write_sysreg_s(val, SYS_CNTKCTL_EL12);	break;
 	case ELR_EL1:		write_sysreg_s(val, SYS_ELR_EL12);	break;
+	case SPSR_EL1:		write_sysreg_s(val, SYS_SPSR_EL12);	break;
 	case PAR_EL1:		write_sysreg_s(val, SYS_PAR_EL1);	break;
 	case DACR32_EL2:	write_sysreg_s(val, SYS_DACR32_EL2);	break;
 	case IFSR32_EL2:	write_sysreg_s(val, SYS_IFSR32_EL2);	break;
@@ -954,8 +993,6 @@ int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu,
 int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
 			      struct kvm_vcpu_events *events);
 
-#define KVM_ARCH_WANT_MMU_NOTIFIER
-
 void kvm_arm_halt_guest(struct kvm *kvm);
 void kvm_arm_resume_guest(struct kvm *kvm);
 
@@ -1177,6 +1214,13 @@ bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu);
 #define kvm_vm_has_ran_once(kvm)					\
 	(test_bit(KVM_ARCH_FLAG_HAS_RAN_ONCE, &(kvm)->arch.flags))
 
+static inline bool __vcpu_has_feature(const struct kvm_arch *ka, int feature)
+{
+	return test_bit(feature, ka->vcpu_features);
+}
+
+#define vcpu_has_feature(v, f)	__vcpu_has_feature(&(v)->kvm->arch, (f))
+
 int kvm_trng_call(struct kvm_vcpu *vcpu);
 #ifdef CONFIG_KVM
 extern phys_addr_t hyp_mem_base;
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
index 49e0d4b36bd0..e3e793d0ec30 100644
--- a/arch/arm64/include/asm/kvm_mmu.h
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -244,13 +244,6 @@ static inline size_t __invalidate_icache_max_range(void)
 static inline void __invalidate_icache_guest_page(void *va, size_t size)
 {
 	/*
-	 * VPIPT I-cache maintenance must be done from EL2. See comment in the
-	 * nVHE flavor of __kvm_tlb_flush_vmid_ipa().
-	 */
-	if (icache_is_vpipt() && read_sysreg(CurrentEL) != CurrentEL_EL2)
-		return;
-
-	/*
 	 * Blow the whole I-cache if it is aliasing (i.e. VIPT) or the
 	 * invalidation range exceeds our arbitrary limit on invadations by
 	 * cache line.
diff --git a/arch/arm64/include/asm/kvm_nested.h b/arch/arm64/include/asm/kvm_nested.h
index 6cec8e9c6c91..4882905357f4 100644
--- a/arch/arm64/include/asm/kvm_nested.h
+++ b/arch/arm64/include/asm/kvm_nested.h
@@ -2,8 +2,9 @@
 #ifndef __ARM64_KVM_NESTED_H
 #define __ARM64_KVM_NESTED_H
 
-#include <asm/kvm_emulate.h>
+#include <linux/bitfield.h>
 #include <linux/kvm_host.h>
+#include <asm/kvm_emulate.h>
 
 static inline bool vcpu_has_nv(const struct kvm_vcpu *vcpu)
 {
@@ -12,12 +13,55 @@ static inline bool vcpu_has_nv(const struct kvm_vcpu *vcpu)
 		vcpu_has_feature(vcpu, KVM_ARM_VCPU_HAS_EL2));
 }
 
-extern bool __check_nv_sr_forward(struct kvm_vcpu *vcpu);
+/* Translation helpers from non-VHE EL2 to EL1 */
+static inline u64 tcr_el2_ps_to_tcr_el1_ips(u64 tcr_el2)
+{
+	return (u64)FIELD_GET(TCR_EL2_PS_MASK, tcr_el2) << TCR_IPS_SHIFT;
+}
+
+static inline u64 translate_tcr_el2_to_tcr_el1(u64 tcr)
+{
+	return TCR_EPD1_MASK |				/* disable TTBR1_EL1 */
+	       ((tcr & TCR_EL2_TBI) ? TCR_TBI0 : 0) |
+	       tcr_el2_ps_to_tcr_el1_ips(tcr) |
+	       (tcr & TCR_EL2_TG0_MASK) |
+	       (tcr & TCR_EL2_ORGN0_MASK) |
+	       (tcr & TCR_EL2_IRGN0_MASK) |
+	       (tcr & TCR_EL2_T0SZ_MASK);
+}
+
+static inline u64 translate_cptr_el2_to_cpacr_el1(u64 cptr_el2)
+{
+	u64 cpacr_el1 = 0;
+
+	if (cptr_el2 & CPTR_EL2_TTA)
+		cpacr_el1 |= CPACR_ELx_TTA;
+	if (!(cptr_el2 & CPTR_EL2_TFP))
+		cpacr_el1 |= CPACR_ELx_FPEN;
+	if (!(cptr_el2 & CPTR_EL2_TZ))
+		cpacr_el1 |= CPACR_ELx_ZEN;
 
-struct sys_reg_params;
-struct sys_reg_desc;
+	return cpacr_el1;
+}
+
+static inline u64 translate_sctlr_el2_to_sctlr_el1(u64 val)
+{
+	/* Only preserve the minimal set of bits we support */
+	val &= (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | SCTLR_ELx_SA |
+		SCTLR_ELx_I | SCTLR_ELx_IESB | SCTLR_ELx_WXN | SCTLR_ELx_EE);
+	val |= SCTLR_EL1_RES1;
+
+	return val;
+}
+
+static inline u64 translate_ttbr0_el2_to_ttbr0_el1(u64 ttbr0)
+{
+	/* Clear the ASID field */
+	return ttbr0 & ~GENMASK_ULL(63, 48);
+}
+
+extern bool __check_nv_sr_forward(struct kvm_vcpu *vcpu);
 
-void access_nested_id_reg(struct kvm_vcpu *v, struct sys_reg_params *p,
-			  const struct sys_reg_desc *r);
+int kvm_init_nv_sysregs(struct kvm *kvm);
 
 #endif /* __ARM64_KVM_NESTED_H */
diff --git a/arch/arm64/include/asm/kvm_pgtable.h b/arch/arm64/include/asm/kvm_pgtable.h
index d3e354bb8351..cfdf40f734b1 100644
--- a/arch/arm64/include/asm/kvm_pgtable.h
+++ b/arch/arm64/include/asm/kvm_pgtable.h
@@ -11,7 +11,8 @@
 #include <linux/kvm_host.h>
 #include <linux/types.h>
 
-#define KVM_PGTABLE_MAX_LEVELS		4U
+#define KVM_PGTABLE_FIRST_LEVEL		-1
+#define KVM_PGTABLE_LAST_LEVEL		3
 
 /*
  * The largest supported block sizes for KVM (no 52-bit PA support):
@@ -20,17 +21,29 @@
  *  - 64K (level 2):	512MB
  */
 #ifdef CONFIG_ARM64_4K_PAGES
-#define KVM_PGTABLE_MIN_BLOCK_LEVEL	1U
+#define KVM_PGTABLE_MIN_BLOCK_LEVEL	1
 #else
-#define KVM_PGTABLE_MIN_BLOCK_LEVEL	2U
+#define KVM_PGTABLE_MIN_BLOCK_LEVEL	2
 #endif
 
+#define kvm_lpa2_is_enabled()		system_supports_lpa2()
+
+static inline u64 kvm_get_parange_max(void)
+{
+	if (kvm_lpa2_is_enabled() ||
+	   (IS_ENABLED(CONFIG_ARM64_PA_BITS_52) && PAGE_SHIFT == 16))
+		return ID_AA64MMFR0_EL1_PARANGE_52;
+	else
+		return ID_AA64MMFR0_EL1_PARANGE_48;
+}
+
 static inline u64 kvm_get_parange(u64 mmfr0)
 {
+	u64 parange_max = kvm_get_parange_max();
 	u64 parange = cpuid_feature_extract_unsigned_field(mmfr0,
 				ID_AA64MMFR0_EL1_PARANGE_SHIFT);
-	if (parange > ID_AA64MMFR0_EL1_PARANGE_MAX)
-		parange = ID_AA64MMFR0_EL1_PARANGE_MAX;
+	if (parange > parange_max)
+		parange = parange_max;
 
 	return parange;
 }
@@ -41,6 +54,8 @@ typedef u64 kvm_pte_t;
 
 #define KVM_PTE_ADDR_MASK		GENMASK(47, PAGE_SHIFT)
 #define KVM_PTE_ADDR_51_48		GENMASK(15, 12)
+#define KVM_PTE_ADDR_MASK_LPA2		GENMASK(49, PAGE_SHIFT)
+#define KVM_PTE_ADDR_51_50_LPA2		GENMASK(9, 8)
 
 #define KVM_PHYS_INVALID		(-1ULL)
 
@@ -51,21 +66,34 @@ static inline bool kvm_pte_valid(kvm_pte_t pte)
 
 static inline u64 kvm_pte_to_phys(kvm_pte_t pte)
 {
-	u64 pa = pte & KVM_PTE_ADDR_MASK;
-
-	if (PAGE_SHIFT == 16)
-		pa |= FIELD_GET(KVM_PTE_ADDR_51_48, pte) << 48;
+	u64 pa;
+
+	if (kvm_lpa2_is_enabled()) {
+		pa = pte & KVM_PTE_ADDR_MASK_LPA2;
+		pa |= FIELD_GET(KVM_PTE_ADDR_51_50_LPA2, pte) << 50;
+	} else {
+		pa = pte & KVM_PTE_ADDR_MASK;
+		if (PAGE_SHIFT == 16)
+			pa |= FIELD_GET(KVM_PTE_ADDR_51_48, pte) << 48;
+	}
 
 	return pa;
 }
 
 static inline kvm_pte_t kvm_phys_to_pte(u64 pa)
 {
-	kvm_pte_t pte = pa & KVM_PTE_ADDR_MASK;
-
-	if (PAGE_SHIFT == 16) {
-		pa &= GENMASK(51, 48);
-		pte |= FIELD_PREP(KVM_PTE_ADDR_51_48, pa >> 48);
+	kvm_pte_t pte;
+
+	if (kvm_lpa2_is_enabled()) {
+		pte = pa & KVM_PTE_ADDR_MASK_LPA2;
+		pa &= GENMASK(51, 50);
+		pte |= FIELD_PREP(KVM_PTE_ADDR_51_50_LPA2, pa >> 50);
+	} else {
+		pte = pa & KVM_PTE_ADDR_MASK;
+		if (PAGE_SHIFT == 16) {
+			pa &= GENMASK(51, 48);
+			pte |= FIELD_PREP(KVM_PTE_ADDR_51_48, pa >> 48);
+		}
 	}
 
 	return pte;
@@ -76,28 +104,28 @@ static inline kvm_pfn_t kvm_pte_to_pfn(kvm_pte_t pte)
 	return __phys_to_pfn(kvm_pte_to_phys(pte));
 }
 
-static inline u64 kvm_granule_shift(u32 level)
+static inline u64 kvm_granule_shift(s8 level)
 {
-	/* Assumes KVM_PGTABLE_MAX_LEVELS is 4 */
+	/* Assumes KVM_PGTABLE_LAST_LEVEL is 3 */
 	return ARM64_HW_PGTABLE_LEVEL_SHIFT(level);
 }
 
-static inline u64 kvm_granule_size(u32 level)
+static inline u64 kvm_granule_size(s8 level)
 {
 	return BIT(kvm_granule_shift(level));
 }
 
-static inline bool kvm_level_supports_block_mapping(u32 level)
+static inline bool kvm_level_supports_block_mapping(s8 level)
 {
 	return level >= KVM_PGTABLE_MIN_BLOCK_LEVEL;
 }
 
 static inline u32 kvm_supported_block_sizes(void)
 {
-	u32 level = KVM_PGTABLE_MIN_BLOCK_LEVEL;
+	s8 level = KVM_PGTABLE_MIN_BLOCK_LEVEL;
 	u32 r = 0;
 
-	for (; level < KVM_PGTABLE_MAX_LEVELS; level++)
+	for (; level <= KVM_PGTABLE_LAST_LEVEL; level++)
 		r |= BIT(kvm_granule_shift(level));
 
 	return r;
@@ -142,7 +170,7 @@ struct kvm_pgtable_mm_ops {
 	void*		(*zalloc_page)(void *arg);
 	void*		(*zalloc_pages_exact)(size_t size);
 	void		(*free_pages_exact)(void *addr, size_t size);
-	void		(*free_unlinked_table)(void *addr, u32 level);
+	void		(*free_unlinked_table)(void *addr, s8 level);
 	void		(*get_page)(void *addr);
 	void		(*put_page)(void *addr);
 	int		(*page_count)(void *addr);
@@ -238,7 +266,7 @@ struct kvm_pgtable_visit_ctx {
 	u64					start;
 	u64					addr;
 	u64					end;
-	u32					level;
+	s8					level;
 	enum kvm_pgtable_walk_flags		flags;
 };
 
@@ -341,7 +369,7 @@ static inline bool kvm_pgtable_walk_lock_held(void)
  */
 struct kvm_pgtable {
 	u32					ia_bits;
-	u32					start_level;
+	s8					start_level;
 	kvm_pteref_t				pgd;
 	struct kvm_pgtable_mm_ops		*mm_ops;
 
@@ -475,7 +503,7 @@ void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt);
  * The page-table is assumed to be unreachable by any hardware walkers prior to
  * freeing and therefore no TLB invalidation is performed.
  */
-void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, u32 level);
+void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, s8 level);
 
 /**
  * kvm_pgtable_stage2_create_unlinked() - Create an unlinked stage-2 paging structure.
@@ -499,7 +527,7 @@ void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *p
  * an ERR_PTR(error) on failure.
  */
 kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
-					      u64 phys, u32 level,
+					      u64 phys, s8 level,
 					      enum kvm_pgtable_prot prot,
 					      void *mc, bool force_pte);
 
@@ -725,7 +753,7 @@ int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size,
  * Return: 0 on success, negative error code on failure.
  */
 int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr,
-			 kvm_pte_t *ptep, u32 *level);
+			 kvm_pte_t *ptep, s8 *level);
 
 /**
  * kvm_pgtable_stage2_pte_prot() - Retrieve the protection attributes of a
diff --git a/arch/arm64/include/asm/kvm_pkvm.h b/arch/arm64/include/asm/kvm_pkvm.h
index e46250a02017..ad9cfb5c1ff4 100644
--- a/arch/arm64/include/asm/kvm_pkvm.h
+++ b/arch/arm64/include/asm/kvm_pkvm.h
@@ -56,10 +56,11 @@ static inline unsigned long hyp_vm_table_pages(void)
 
 static inline unsigned long __hyp_pgtable_max_pages(unsigned long nr_pages)
 {
-	unsigned long total = 0, i;
+	unsigned long total = 0;
+	int i;
 
 	/* Provision the worst case scenario */
-	for (i = 0; i < KVM_PGTABLE_MAX_LEVELS; i++) {
+	for (i = KVM_PGTABLE_FIRST_LEVEL; i <= KVM_PGTABLE_LAST_LEVEL; i++) {
 		nr_pages = DIV_ROUND_UP(nr_pages, PTRS_PER_PTE);
 		total += nr_pages;
 	}
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index fde4186cc387..d82305ab420f 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -65,15 +65,41 @@
 #define KERNEL_END		_end
 
 /*
- * Generic and tag-based KASAN require 1/8th and 1/16th of the kernel virtual
- * address space for the shadow region respectively. They can bloat the stack
- * significantly, so double the (minimum) stack size when they are in use.
+ * Generic and Software Tag-Based KASAN modes require 1/8th and 1/16th of the
+ * kernel virtual address space for storing the shadow memory respectively.
+ *
+ * The mapping between a virtual memory address and its corresponding shadow
+ * memory address is defined based on the formula:
+ *
+ *     shadow_addr = (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET
+ *
+ * where KASAN_SHADOW_SCALE_SHIFT is the order of the number of bits that map
+ * to a single shadow byte and KASAN_SHADOW_OFFSET is a constant that offsets
+ * the mapping. Note that KASAN_SHADOW_OFFSET does not point to the start of
+ * the shadow memory region.
+ *
+ * Based on this mapping, we define two constants:
+ *
+ *     KASAN_SHADOW_START: the start of the shadow memory region;
+ *     KASAN_SHADOW_END: the end of the shadow memory region.
+ *
+ * KASAN_SHADOW_END is defined first as the shadow address that corresponds to
+ * the upper bound of possible virtual kernel memory addresses UL(1) << 64
+ * according to the mapping formula.
+ *
+ * KASAN_SHADOW_START is defined second based on KASAN_SHADOW_END. The shadow
+ * memory start must map to the lowest possible kernel virtual memory address
+ * and thus it depends on the actual bitness of the address space.
+ *
+ * As KASAN inserts redzones between stack variables, this increases the stack
+ * memory usage significantly. Thus, we double the (minimum) stack size.
  */
 #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
 #define KASAN_SHADOW_OFFSET	_AC(CONFIG_KASAN_SHADOW_OFFSET, UL)
-#define KASAN_SHADOW_END	((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \
-					+ KASAN_SHADOW_OFFSET)
-#define PAGE_END		(KASAN_SHADOW_END - (1UL << (vabits_actual - KASAN_SHADOW_SCALE_SHIFT)))
+#define KASAN_SHADOW_END	((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) + KASAN_SHADOW_OFFSET)
+#define _KASAN_SHADOW_START(va)	(KASAN_SHADOW_END - (UL(1) << ((va) - KASAN_SHADOW_SCALE_SHIFT)))
+#define KASAN_SHADOW_START	_KASAN_SHADOW_START(vabits_actual)
+#define PAGE_END		KASAN_SHADOW_START
 #define KASAN_THREAD_SHIFT	1
 #else
 #define KASAN_THREAD_SHIFT	0
@@ -182,6 +208,7 @@
 #include <linux/types.h>
 #include <asm/boot.h>
 #include <asm/bug.h>
+#include <asm/sections.h>
 
 #if VA_BITS > 48
 extern u64			vabits_actual;
@@ -193,15 +220,12 @@ extern s64			memstart_addr;
 /* PHYS_OFFSET - the physical address of the start of memory. */
 #define PHYS_OFFSET		({ VM_BUG_ON(memstart_addr & 1); memstart_addr; })
 
-/* the virtual base of the kernel image */
-extern u64			kimage_vaddr;
-
 /* the offset between the kernel virtual and physical mappings */
 extern u64			kimage_voffset;
 
 static inline unsigned long kaslr_offset(void)
 {
-	return kimage_vaddr - KIMAGE_VADDR;
+	return (u64)&_text - KIMAGE_VADDR;
 }
 
 #ifdef CONFIG_RANDOMIZE_BASE
@@ -407,6 +431,5 @@ void dump_mem_limit(void);
 #define INIT_MEMBLOCK_MEMORY_REGIONS	(INIT_MEMBLOCK_REGIONS * 8)
 #endif
 
-#include <asm-generic/memory_model.h>
 
 #endif /* __ASM_MEMORY_H */
diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h
index e9624f6326dd..483dbfa39c4c 100644
--- a/arch/arm64/include/asm/pgtable-prot.h
+++ b/arch/arm64/include/asm/pgtable-prot.h
@@ -71,6 +71,8 @@ extern bool arm64_use_ng_mappings;
 #define PTE_MAYBE_NG		(arm64_use_ng_mappings ? PTE_NG : 0)
 #define PMD_MAYBE_NG		(arm64_use_ng_mappings ? PMD_SECT_NG : 0)
 
+#define lpa2_is_enabled()	false
+
 /*
  * If we have userspace only BTI we don't want to mark kernel pages
  * guarded even if the system does support BTI.
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index e5bc54522e71..5b0a04810b23 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -167,6 +167,9 @@ struct thread_struct {
 	unsigned long		fault_address;	/* fault info */
 	unsigned long		fault_code;	/* ESR_EL1 value */
 	struct debug_info	debug;		/* debugging */
+
+	struct user_fpsimd_state	kernel_fpsimd_state;
+	unsigned int			kernel_fpsimd_cpu;
 #ifdef CONFIG_ARM64_PTR_AUTH
 	struct ptrauth_keys_user	keys_user;
 #ifdef CONFIG_ARM64_PTR_AUTH_KERNEL
diff --git a/arch/arm64/include/asm/simd.h b/arch/arm64/include/asm/simd.h
index 6a75d7ecdcaa..8e86c9e70e48 100644
--- a/arch/arm64/include/asm/simd.h
+++ b/arch/arm64/include/asm/simd.h
@@ -12,8 +12,6 @@
 #include <linux/preempt.h>
 #include <linux/types.h>
 
-DECLARE_PER_CPU(bool, fpsimd_context_busy);
-
 #ifdef CONFIG_KERNEL_MODE_NEON
 
 /*
@@ -28,17 +26,10 @@ static __must_check inline bool may_use_simd(void)
 	/*
 	 * We must make sure that the SVE has been initialized properly
 	 * before using the SIMD in kernel.
-	 * fpsimd_context_busy is only set while preemption is disabled,
-	 * and is clear whenever preemption is enabled. Since
-	 * this_cpu_read() is atomic w.r.t. preemption, fpsimd_context_busy
-	 * cannot change under our feet -- if it's set we cannot be
-	 * migrated, and if it's clear we cannot be migrated to a CPU
-	 * where it is set.
 	 */
 	return !WARN_ON(!system_capabilities_finalized()) &&
 	       system_supports_fpsimd() &&
-	       !in_hardirq() && !irqs_disabled() && !in_nmi() &&
-	       !this_cpu_read(fpsimd_context_busy);
+	       !in_hardirq() && !irqs_disabled() && !in_nmi();
 }
 
 #else /* ! CONFIG_KERNEL_MODE_NEON */
diff --git a/arch/arm64/include/asm/sparsemem.h b/arch/arm64/include/asm/sparsemem.h
index 5f5437621029..8a8acc220371 100644
--- a/arch/arm64/include/asm/sparsemem.h
+++ b/arch/arm64/include/asm/sparsemem.h
@@ -10,7 +10,7 @@
 /*
  * Section size must be at least 512MB for 64K base
  * page size config. Otherwise it will be less than
- * MAX_ORDER and the build process will fail.
+ * MAX_PAGE_ORDER and the build process will fail.
  */
 #ifdef CONFIG_ARM64_64K_PAGES
 #define SECTION_SIZE_BITS 29
diff --git a/arch/arm64/include/asm/spectre.h b/arch/arm64/include/asm/spectre.h
index 06c357d83b13..0c4d9045c31f 100644
--- a/arch/arm64/include/asm/spectre.h
+++ b/arch/arm64/include/asm/spectre.h
@@ -13,8 +13,8 @@
 #define __BP_HARDEN_HYP_VECS_SZ	((BP_HARDEN_EL2_SLOTS - 1) * SZ_2K)
 
 #ifndef __ASSEMBLY__
-
-#include <linux/percpu.h>
+#include <linux/smp.h>
+#include <asm/percpu.h>
 
 #include <asm/cpufeature.h>
 #include <asm/virt.h>
diff --git a/arch/arm64/include/asm/stacktrace/common.h b/arch/arm64/include/asm/stacktrace/common.h
index 508f734de46e..f63dc654e545 100644
--- a/arch/arm64/include/asm/stacktrace/common.h
+++ b/arch/arm64/include/asm/stacktrace/common.h
@@ -9,7 +9,6 @@
 #ifndef __ASM_STACKTRACE_COMMON_H
 #define __ASM_STACKTRACE_COMMON_H
 
-#include <linux/kprobes.h>
 #include <linux/types.h>
 
 struct stack_info {
@@ -23,12 +22,6 @@ struct stack_info {
  * @fp:          The fp value in the frame record (or the real fp)
  * @pc:          The lr value in the frame record (or the real lr)
  *
- * @kr_cur:      When KRETPROBES is selected, holds the kretprobe instance
- *               associated with the most recently encountered replacement lr
- *               value.
- *
- * @task:        The task being unwound.
- *
  * @stack:       The stack currently being unwound.
  * @stacks:      An array of stacks which can be unwound.
  * @nr_stacks:   The number of stacks in @stacks.
@@ -36,10 +29,6 @@ struct stack_info {
 struct unwind_state {
 	unsigned long fp;
 	unsigned long pc;
-#ifdef CONFIG_KRETPROBES
-	struct llist_node *kr_cur;
-#endif
-	struct task_struct *task;
 
 	struct stack_info stack;
 	struct stack_info *stacks;
@@ -66,14 +55,8 @@ static inline bool stackinfo_on_stack(const struct stack_info *info,
 	return true;
 }
 
-static inline void unwind_init_common(struct unwind_state *state,
-				      struct task_struct *task)
+static inline void unwind_init_common(struct unwind_state *state)
 {
-	state->task = task;
-#ifdef CONFIG_KRETPROBES
-	state->kr_cur = NULL;
-#endif
-
 	state->stack = stackinfo_get_unknown();
 }
 
diff --git a/arch/arm64/include/asm/stacktrace/nvhe.h b/arch/arm64/include/asm/stacktrace/nvhe.h
index 25ab83a315a7..44759281d0d4 100644
--- a/arch/arm64/include/asm/stacktrace/nvhe.h
+++ b/arch/arm64/include/asm/stacktrace/nvhe.h
@@ -31,7 +31,7 @@ static inline void kvm_nvhe_unwind_init(struct unwind_state *state,
 					unsigned long fp,
 					unsigned long pc)
 {
-	unwind_init_common(state, NULL);
+	unwind_init_common(state);
 
 	state->fp = fp;
 	state->pc = pc;
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 5e65f51c10d2..c3b19b376c86 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -645,6 +645,7 @@
 #define OP_AT_S1E0W	sys_insn(AT_Op0, 0, AT_CRn, 8, 3)
 #define OP_AT_S1E1RP	sys_insn(AT_Op0, 0, AT_CRn, 9, 0)
 #define OP_AT_S1E1WP	sys_insn(AT_Op0, 0, AT_CRn, 9, 1)
+#define OP_AT_S1E1A	sys_insn(AT_Op0, 0, AT_CRn, 9, 2)
 #define OP_AT_S1E2R	sys_insn(AT_Op0, 4, AT_CRn, 8, 0)
 #define OP_AT_S1E2W	sys_insn(AT_Op0, 4, AT_CRn, 8, 1)
 #define OP_AT_S12E1R	sys_insn(AT_Op0, 4, AT_CRn, 8, 4)
@@ -781,10 +782,16 @@
 #define OP_TLBI_VMALLS12E1NXS		sys_insn(1, 4, 9, 7, 6)
 
 /* Misc instructions */
+#define OP_GCSPUSHX			sys_insn(1, 0, 7, 7, 4)
+#define OP_GCSPOPCX			sys_insn(1, 0, 7, 7, 5)
+#define OP_GCSPOPX			sys_insn(1, 0, 7, 7, 6)
+#define OP_GCSPUSHM			sys_insn(1, 3, 7, 7, 0)
+
 #define OP_BRB_IALL			sys_insn(1, 1, 7, 2, 4)
 #define OP_BRB_INJ			sys_insn(1, 1, 7, 2, 5)
 #define OP_CFP_RCTX			sys_insn(1, 3, 7, 3, 4)
 #define OP_DVP_RCTX			sys_insn(1, 3, 7, 3, 5)
+#define OP_COSP_RCTX			sys_insn(1, 3, 7, 3, 6)
 #define OP_CPP_RCTX			sys_insn(1, 3, 7, 3, 7)
 
 /* Common SCTLR_ELx flags. */
@@ -871,10 +878,12 @@
 
 /* id_aa64mmfr0 */
 #define ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN	0x0
+#define ID_AA64MMFR0_EL1_TGRAN4_LPA2		ID_AA64MMFR0_EL1_TGRAN4_52_BIT
 #define ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MAX	0x7
 #define ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MIN	0x0
 #define ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MAX	0x7
 #define ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MIN	0x1
+#define ID_AA64MMFR0_EL1_TGRAN16_LPA2		ID_AA64MMFR0_EL1_TGRAN16_52_BIT
 #define ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MAX	0xf
 
 #define ARM64_MIN_PARANGE_BITS		32
@@ -882,6 +891,7 @@
 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_DEFAULT	0x0
 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_NONE		0x1
 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MIN		0x2
+#define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_LPA2		0x3
 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MAX		0x7
 
 #ifdef CONFIG_ARM64_PA_BITS_52
@@ -892,11 +902,13 @@
 
 #if defined(CONFIG_ARM64_4K_PAGES)
 #define ID_AA64MMFR0_EL1_TGRAN_SHIFT		ID_AA64MMFR0_EL1_TGRAN4_SHIFT
+#define ID_AA64MMFR0_EL1_TGRAN_LPA2		ID_AA64MMFR0_EL1_TGRAN4_52_BIT
 #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN	ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN
 #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX	ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MAX
 #define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT		ID_AA64MMFR0_EL1_TGRAN4_2_SHIFT
 #elif defined(CONFIG_ARM64_16K_PAGES)
 #define ID_AA64MMFR0_EL1_TGRAN_SHIFT		ID_AA64MMFR0_EL1_TGRAN16_SHIFT
+#define ID_AA64MMFR0_EL1_TGRAN_LPA2		ID_AA64MMFR0_EL1_TGRAN16_52_BIT
 #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN	ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MIN
 #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX	ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MAX
 #define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT		ID_AA64MMFR0_EL1_TGRAN16_2_SHIFT
@@ -1039,6 +1051,19 @@
 
 #define PIRx_ELx_PERM(idx, perm)	((perm) << ((idx) * 4))
 
+/*
+ * Permission Overlay Extension (POE) permission encodings.
+ */
+#define POE_NONE	UL(0x0)
+#define POE_R		UL(0x1)
+#define POE_X		UL(0x2)
+#define POE_RX		UL(0x3)
+#define POE_W		UL(0x4)
+#define POE_RW		UL(0x5)
+#define POE_XW		UL(0x6)
+#define POE_RXW		UL(0x7)
+#define POE_MASK	UL(0xf)
+
 #define ARM64_FEATURE_FIELD_BITS	4
 
 /* Defined for compatibility only, do not add new users. */
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 553d1bc559c6..e72a3bf9e563 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -80,6 +80,7 @@ void arch_setup_new_exec(void);
 #define TIF_TAGGED_ADDR		26	/* Allow tagged user addresses */
 #define TIF_SME			27	/* SME in use */
 #define TIF_SME_VL_INHERIT	28	/* Inherit SME vl_onexec across exec */
+#define TIF_KERNEL_FPSTATE	29	/* Task is in a kernel mode FPSIMD section */
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h
index 846c563689a8..0150deb332af 100644
--- a/arch/arm64/include/asm/tlb.h
+++ b/arch/arm64/include/asm/tlb.h
@@ -22,15 +22,15 @@ static void tlb_flush(struct mmu_gather *tlb);
 #include <asm-generic/tlb.h>
 
 /*
- * get the tlbi levels in arm64.  Default value is 0 if more than one
- * of cleared_* is set or neither is set.
- * Arm64 doesn't support p4ds now.
+ * get the tlbi levels in arm64.  Default value is TLBI_TTL_UNKNOWN if more than
+ * one of cleared_* is set or neither is set - this elides the level hinting to
+ * the hardware.
  */
 static inline int tlb_get_level(struct mmu_gather *tlb)
 {
 	/* The TTL field is only valid for the leaf entry. */
 	if (tlb->freed_tables)
-		return 0;
+		return TLBI_TTL_UNKNOWN;
 
 	if (tlb->cleared_ptes && !(tlb->cleared_pmds ||
 				   tlb->cleared_puds ||
@@ -47,7 +47,12 @@ static inline int tlb_get_level(struct mmu_gather *tlb)
 				   tlb->cleared_p4ds))
 		return 1;
 
-	return 0;
+	if (tlb->cleared_p4ds && !(tlb->cleared_ptes ||
+				   tlb->cleared_pmds ||
+				   tlb->cleared_puds))
+		return 0;
+
+	return TLBI_TTL_UNKNOWN;
 }
 
 static inline void tlb_flush(struct mmu_gather *tlb)
diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
index bb2c2833a987..1deb5d789c2e 100644
--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@@ -94,19 +94,22 @@ static inline unsigned long get_trans_granule(void)
  * When ARMv8.4-TTL exists, TLBI operations take an additional hint for
  * the level at which the invalidation must take place. If the level is
  * wrong, no invalidation may take place. In the case where the level
- * cannot be easily determined, a 0 value for the level parameter will
- * perform a non-hinted invalidation.
+ * cannot be easily determined, the value TLBI_TTL_UNKNOWN will perform
+ * a non-hinted invalidation. Any provided level outside the hint range
+ * will also cause fall-back to non-hinted invalidation.
  *
  * For Stage-2 invalidation, use the level values provided to that effect
  * in asm/stage2_pgtable.h.
  */
 #define TLBI_TTL_MASK		GENMASK_ULL(47, 44)
 
+#define TLBI_TTL_UNKNOWN	INT_MAX
+
 #define __tlbi_level(op, addr, level) do {				\
 	u64 arg = addr;							\
 									\
 	if (alternative_has_cap_unlikely(ARM64_HAS_ARMv8_4_TTL) &&	\
-	    level) {							\
+	    level >= 0 && level <= 3) {					\
 		u64 ttl = level & 3;					\
 		ttl |= get_trans_granule() << 2;			\
 		arg &= ~TLBI_TTL_MASK;					\
@@ -122,28 +125,34 @@ static inline unsigned long get_trans_granule(void)
 } while (0)
 
 /*
- * This macro creates a properly formatted VA operand for the TLB RANGE.
- * The value bit assignments are:
+ * This macro creates a properly formatted VA operand for the TLB RANGE. The
+ * value bit assignments are:
  *
  * +----------+------+-------+-------+-------+----------------------+
  * |   ASID   |  TG  | SCALE |  NUM  |  TTL  |        BADDR         |
  * +-----------------+-------+-------+-------+----------------------+
  * |63      48|47  46|45   44|43   39|38   37|36                   0|
  *
- * The address range is determined by below formula:
- * [BADDR, BADDR + (NUM + 1) * 2^(5*SCALE + 1) * PAGESIZE)
+ * The address range is determined by below formula: [BADDR, BADDR + (NUM + 1) *
+ * 2^(5*SCALE + 1) * PAGESIZE)
+ *
+ * Note that the first argument, baddr, is pre-shifted; If LPA2 is in use, BADDR
+ * holds addr[52:16]. Else BADDR holds page number. See for example ARM DDI
+ * 0487J.a section C5.5.60 "TLBI VAE1IS, TLBI VAE1ISNXS, TLB Invalidate by VA,
+ * EL1, Inner Shareable".
  *
  */
-#define __TLBI_VADDR_RANGE(addr, asid, scale, num, ttl)		\
-	({							\
-		unsigned long __ta = (addr) >> PAGE_SHIFT;	\
-		__ta &= GENMASK_ULL(36, 0);			\
-		__ta |= (unsigned long)(ttl) << 37;		\
-		__ta |= (unsigned long)(num) << 39;		\
-		__ta |= (unsigned long)(scale) << 44;		\
-		__ta |= get_trans_granule() << 46;		\
-		__ta |= (unsigned long)(asid) << 48;		\
-		__ta;						\
+#define __TLBI_VADDR_RANGE(baddr, asid, scale, num, ttl)			\
+	({									\
+		unsigned long __ta = (baddr);					\
+		unsigned long __ttl = (ttl >= 1 && ttl <= 3) ? ttl : 0;		\
+		__ta &= GENMASK_ULL(36, 0);					\
+		__ta |= __ttl << 37;						\
+		__ta |= (unsigned long)(num) << 39;				\
+		__ta |= (unsigned long)(scale) << 44;				\
+		__ta |= get_trans_granule() << 46;				\
+		__ta |= (unsigned long)(asid) << 48;				\
+		__ta;								\
 	})
 
 /* These macros are used by the TLBI RANGE feature. */
@@ -216,12 +225,16 @@ static inline unsigned long get_trans_granule(void)
  *		CPUs, ensuring that any walk-cache entries associated with the
  *		translation are also invalidated.
  *
- *	__flush_tlb_range(vma, start, end, stride, last_level)
+ *	__flush_tlb_range(vma, start, end, stride, last_level, tlb_level)
  *		Invalidate the virtual-address range '[start, end)' on all
  *		CPUs for the user address space corresponding to 'vma->mm'.
  *		The invalidation operations are issued at a granularity
  *		determined by 'stride' and only affect any walk-cache entries
- *		if 'last_level' is equal to false.
+ *		if 'last_level' is equal to false. tlb_level is the level at
+ *		which the invalidation must take place. If the level is wrong,
+ *		no invalidation may take place. In the case where the level
+ *		cannot be easily determined, the value TLBI_TTL_UNKNOWN will
+ *		perform a non-hinted invalidation.
  *
  *
  *	Finally, take a look at asm/tlb.h to see how tlb_flush() is implemented
@@ -345,34 +358,44 @@ static inline void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
  * @tlb_level:	Translation Table level hint, if known
  * @tlbi_user:	If 'true', call an additional __tlbi_user()
  *              (typically for user ASIDs). 'flase' for IPA instructions
+ * @lpa2:	If 'true', the lpa2 scheme is used as set out below
  *
  * When the CPU does not support TLB range operations, flush the TLB
  * entries one by one at the granularity of 'stride'. If the TLB
  * range ops are supported, then:
  *
- * 1. If 'pages' is odd, flush the first page through non-range
- *    operations;
+ * 1. If FEAT_LPA2 is in use, the start address of a range operation must be
+ *    64KB aligned, so flush pages one by one until the alignment is reached
+ *    using the non-range operations. This step is skipped if LPA2 is not in
+ *    use.
+ *
+ * 2. The minimum range granularity is decided by 'scale', so multiple range
+ *    TLBI operations may be required. Start from scale = 3, flush the largest
+ *    possible number of pages ((num+1)*2^(5*scale+1)) that fit into the
+ *    requested range, then decrement scale and continue until one or zero pages
+ *    are left. We must start from highest scale to ensure 64KB start alignment
+ *    is maintained in the LPA2 case.
  *
- * 2. For remaining pages: the minimum range granularity is decided
- *    by 'scale', so multiple range TLBI operations may be required.
- *    Start from scale = 0, flush the corresponding number of pages
- *    ((num+1)*2^(5*scale+1) starting from 'addr'), then increase it
- *    until no pages left.
+ * 3. If there is 1 page remaining, flush it through non-range operations. Range
+ *    operations can only span an even number of pages. We save this for last to
+ *    ensure 64KB start alignment is maintained for the LPA2 case.
  *
  * Note that certain ranges can be represented by either num = 31 and
  * scale or num = 0 and scale + 1. The loop below favours the latter
  * since num is limited to 30 by the __TLBI_RANGE_NUM() macro.
  */
 #define __flush_tlb_range_op(op, start, pages, stride,			\
-				asid, tlb_level, tlbi_user)		\
+				asid, tlb_level, tlbi_user, lpa2)	\
 do {									\
 	int num = 0;							\
-	int scale = 0;							\
+	int scale = 3;							\
+	int shift = lpa2 ? 16 : PAGE_SHIFT;				\
 	unsigned long addr;						\
 									\
 	while (pages > 0) {						\
 		if (!system_supports_tlb_range() ||			\
-		    pages % 2 == 1) {					\
+		    pages == 1 ||					\
+		    (lpa2 && start != ALIGN(start, SZ_64K))) {		\
 			addr = __TLBI_VADDR(start, asid);		\
 			__tlbi_level(op, addr, tlb_level);		\
 			if (tlbi_user)					\
@@ -384,20 +407,20 @@ do {									\
 									\
 		num = __TLBI_RANGE_NUM(pages, scale);			\
 		if (num >= 0) {						\
-			addr = __TLBI_VADDR_RANGE(start, asid, scale,	\
-						  num, tlb_level);	\
+			addr = __TLBI_VADDR_RANGE(start >> shift, asid, \
+						scale, num, tlb_level);	\
 			__tlbi(r##op, addr);				\
 			if (tlbi_user)					\
 				__tlbi_user(r##op, addr);		\
 			start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT; \
 			pages -= __TLBI_RANGE_PAGES(num, scale);	\
 		}							\
-		scale++;						\
+		scale--;						\
 	}								\
 } while (0)
 
 #define __flush_s2_tlb_range_op(op, start, pages, stride, tlb_level) \
-	__flush_tlb_range_op(op, start, pages, stride, 0, tlb_level, false)
+	__flush_tlb_range_op(op, start, pages, stride, 0, tlb_level, false, kvm_lpa2_is_enabled());
 
 static inline void __flush_tlb_range(struct vm_area_struct *vma,
 				     unsigned long start, unsigned long end,
@@ -427,9 +450,11 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma,
 	asid = ASID(vma->vm_mm);
 
 	if (last_level)
-		__flush_tlb_range_op(vale1is, start, pages, stride, asid, tlb_level, true);
+		__flush_tlb_range_op(vale1is, start, pages, stride, asid,
+				     tlb_level, true, lpa2_is_enabled());
 	else
-		__flush_tlb_range_op(vae1is, start, pages, stride, asid, tlb_level, true);
+		__flush_tlb_range_op(vae1is, start, pages, stride, asid,
+				     tlb_level, true, lpa2_is_enabled());
 
 	dsb(ish);
 	mmu_notifier_arch_invalidate_secondary_tlbs(vma->vm_mm, start, end);
@@ -441,9 +466,10 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
 	/*
 	 * We cannot use leaf-only invalidation here, since we may be invalidating
 	 * table entries as part of collapsing hugepages or moving page tables.
-	 * Set the tlb_level to 0 because we can not get enough information here.
+	 * Set the tlb_level to TLBI_TTL_UNKNOWN because we can not get enough
+	 * information here.
 	 */
-	__flush_tlb_range(vma, start, end, PAGE_SIZE, false, 0);
+	__flush_tlb_range(vma, start, end, PAGE_SIZE, false, TLBI_TTL_UNKNOWN);
 }
 
 static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h
index 9fab663dd2de..a323b109b9c4 100644
--- a/arch/arm64/include/asm/topology.h
+++ b/arch/arm64/include/asm/topology.h
@@ -23,6 +23,7 @@ void update_freq_counters_refs(void);
 #define arch_set_freq_scale topology_set_freq_scale
 #define arch_scale_freq_capacity topology_get_freq_scale
 #define arch_scale_freq_invariant topology_scale_freq_invariant
+#define arch_scale_freq_ref topology_get_freq_ref
 
 #ifdef CONFIG_ACPI_CPPC_LIB
 #define arch_init_invariance_cppc topology_init_cpu_capacity_cppc
diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h
index 531effca5f1f..491b2b9bd553 100644
--- a/arch/arm64/include/asm/unistd.h
+++ b/arch/arm64/include/asm/unistd.h
@@ -39,7 +39,7 @@
 #define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE + 5)
 #define __ARM_NR_COMPAT_END		(__ARM_NR_COMPAT_BASE + 0x800)
 
-#define __NR_compat_syscalls		457
+#define __NR_compat_syscalls		462
 #endif
 
 #define __ARCH_WANT_SYS_CLONE
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index 9f7c1bf99526..7118282d1c79 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -919,6 +919,16 @@ __SYSCALL(__NR_futex_wake, sys_futex_wake)
 __SYSCALL(__NR_futex_wait, sys_futex_wait)
 #define __NR_futex_requeue 456
 __SYSCALL(__NR_futex_requeue, sys_futex_requeue)
+#define __NR_statmount 457
+__SYSCALL(__NR_statmount, sys_statmount)
+#define __NR_listmount 458
+__SYSCALL(__NR_listmount, sys_listmount)
+#define __NR_lsm_get_self_attr 459
+__SYSCALL(__NR_lsm_get_self_attr, sys_lsm_get_self_attr)
+#define __NR_lsm_set_self_attr 460
+__SYSCALL(__NR_lsm_set_self_attr, sys_lsm_set_self_attr)
+#define __NR_lsm_list_modules 461
+__SYSCALL(__NR_lsm_list_modules, sys_lsm_list_modules)
 
 /*
  * Please add new compat syscalls above this comment and update
diff --git a/arch/arm64/include/asm/vdso.h b/arch/arm64/include/asm/vdso.h
index b4ae32109932..4305995c8f82 100644
--- a/arch/arm64/include/asm/vdso.h
+++ b/arch/arm64/include/asm/vdso.h
@@ -17,9 +17,6 @@
 #ifndef __ASSEMBLY__
 
 #include <generated/vdso-offsets.h>
-#ifdef CONFIG_COMPAT_VDSO
-#include <generated/vdso32-offsets.h>
-#endif
 
 #define VDSO_SYMBOL(base, name)						   \
 ({									   \
diff --git a/arch/arm64/include/asm/vncr_mapping.h b/arch/arm64/include/asm/vncr_mapping.h
new file mode 100644
index 000000000000..df2c47c55972
--- /dev/null
+++ b/arch/arm64/include/asm/vncr_mapping.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * System register offsets in the VNCR page
+ * All offsets are *byte* displacements!
+ */
+
+#ifndef __ARM64_VNCR_MAPPING_H__
+#define __ARM64_VNCR_MAPPING_H__
+
+#define VNCR_VTTBR_EL2          0x020
+#define VNCR_VTCR_EL2           0x040
+#define VNCR_VMPIDR_EL2         0x050
+#define VNCR_CNTVOFF_EL2        0x060
+#define VNCR_HCR_EL2            0x078
+#define VNCR_HSTR_EL2           0x080
+#define VNCR_VPIDR_EL2          0x088
+#define VNCR_TPIDR_EL2          0x090
+#define VNCR_HCRX_EL2           0x0A0
+#define VNCR_VNCR_EL2           0x0B0
+#define VNCR_CPACR_EL1          0x100
+#define VNCR_CONTEXTIDR_EL1     0x108
+#define VNCR_SCTLR_EL1          0x110
+#define VNCR_ACTLR_EL1          0x118
+#define VNCR_TCR_EL1            0x120
+#define VNCR_AFSR0_EL1          0x128
+#define VNCR_AFSR1_EL1          0x130
+#define VNCR_ESR_EL1            0x138
+#define VNCR_MAIR_EL1           0x140
+#define VNCR_AMAIR_EL1          0x148
+#define VNCR_MDSCR_EL1          0x158
+#define VNCR_SPSR_EL1           0x160
+#define VNCR_CNTV_CVAL_EL0      0x168
+#define VNCR_CNTV_CTL_EL0       0x170
+#define VNCR_CNTP_CVAL_EL0      0x178
+#define VNCR_CNTP_CTL_EL0       0x180
+#define VNCR_SCXTNUM_EL1        0x188
+#define VNCR_TFSR_EL1		0x190
+#define VNCR_HFGRTR_EL2		0x1B8
+#define VNCR_HFGWTR_EL2		0x1C0
+#define VNCR_HFGITR_EL2		0x1C8
+#define VNCR_HDFGRTR_EL2	0x1D0
+#define VNCR_HDFGWTR_EL2	0x1D8
+#define VNCR_ZCR_EL1            0x1E0
+#define VNCR_HAFGRTR_EL2	0x1E8
+#define VNCR_TTBR0_EL1          0x200
+#define VNCR_TTBR1_EL1          0x210
+#define VNCR_FAR_EL1            0x220
+#define VNCR_ELR_EL1            0x230
+#define VNCR_SP_EL1             0x240
+#define VNCR_VBAR_EL1           0x250
+#define VNCR_TCR2_EL1		0x270
+#define VNCR_PIRE0_EL1		0x290
+#define VNCR_PIRE0_EL2		0x298
+#define VNCR_PIR_EL1		0x2A0
+#define VNCR_ICH_LR0_EL2        0x400
+#define VNCR_ICH_LR1_EL2        0x408
+#define VNCR_ICH_LR2_EL2        0x410
+#define VNCR_ICH_LR3_EL2        0x418
+#define VNCR_ICH_LR4_EL2        0x420
+#define VNCR_ICH_LR5_EL2        0x428
+#define VNCR_ICH_LR6_EL2        0x430
+#define VNCR_ICH_LR7_EL2        0x438
+#define VNCR_ICH_LR8_EL2        0x440
+#define VNCR_ICH_LR9_EL2        0x448
+#define VNCR_ICH_LR10_EL2       0x450
+#define VNCR_ICH_LR11_EL2       0x458
+#define VNCR_ICH_LR12_EL2       0x460
+#define VNCR_ICH_LR13_EL2       0x468
+#define VNCR_ICH_LR14_EL2       0x470
+#define VNCR_ICH_LR15_EL2       0x478
+#define VNCR_ICH_AP0R0_EL2      0x480
+#define VNCR_ICH_AP0R1_EL2      0x488
+#define VNCR_ICH_AP0R2_EL2      0x490
+#define VNCR_ICH_AP0R3_EL2      0x498
+#define VNCR_ICH_AP1R0_EL2      0x4A0
+#define VNCR_ICH_AP1R1_EL2      0x4A8
+#define VNCR_ICH_AP1R2_EL2      0x4B0
+#define VNCR_ICH_AP1R3_EL2      0x4B8
+#define VNCR_ICH_HCR_EL2        0x4C0
+#define VNCR_ICH_VMCR_EL2       0x4C8
+#define VNCR_VDISR_EL2          0x500
+#define VNCR_PMBLIMITR_EL1      0x800
+#define VNCR_PMBPTR_EL1         0x810
+#define VNCR_PMBSR_EL1          0x820
+#define VNCR_PMSCR_EL1          0x828
+#define VNCR_PMSEVFR_EL1        0x830
+#define VNCR_PMSICR_EL1         0x838
+#define VNCR_PMSIRR_EL1         0x840
+#define VNCR_PMSLATFR_EL1       0x848
+#define VNCR_TRFCR_EL1          0x880
+#define VNCR_MPAM1_EL1          0x900
+#define VNCR_MPAMHCR_EL2        0x930
+#define VNCR_MPAMVPMV_EL2       0x938
+#define VNCR_MPAMVPM0_EL2       0x940
+#define VNCR_MPAMVPM1_EL2       0x948
+#define VNCR_MPAMVPM2_EL2       0x950
+#define VNCR_MPAMVPM3_EL2       0x958
+#define VNCR_MPAMVPM4_EL2       0x960
+#define VNCR_MPAMVPM5_EL2       0x968
+#define VNCR_MPAMVPM6_EL2       0x970
+#define VNCR_MPAMVPM7_EL2       0x978
+
+#endif /* __ARM64_VNCR_MAPPING_H__ */
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index d95b3d6b471a..467cb7117273 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -73,7 +73,13 @@ obj-$(CONFIG_ARM64_MTE)			+= mte.o
 obj-y					+= vdso-wrap.o
 obj-$(CONFIG_COMPAT_VDSO)		+= vdso32-wrap.o
 obj-$(CONFIG_UNWIND_PATCH_PAC_INTO_SCS)	+= patch-scs.o
+
+# We need to prevent the SCS patching code from patching itself. Using
+# -mbranch-protection=none here to avoid the patchable PAC opcodes from being
+# generated triggers an issue with full LTO on Clang, which stops emitting PAC
+# instructions altogether. So disable LTO as well for the compilation unit.
 CFLAGS_patch-scs.o			+= -mbranch-protection=none
+CFLAGS_REMOVE_patch-scs.o		+= $(CC_FLAGS_LTO)
 
 # Force dependency (vdso*-wrap.S includes vdso.so through incbin)
 $(obj)/vdso-wrap.o: $(obj)/vdso/vdso.so
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index 5ff1942b04fc..5a7dbbe0ce63 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -117,8 +117,6 @@ int main(void)
   DEFINE(DMA_FROM_DEVICE,	DMA_FROM_DEVICE);
   BLANK();
   DEFINE(PREEMPT_DISABLE_OFFSET, PREEMPT_DISABLE_OFFSET);
-  DEFINE(SOFTIRQ_SHIFT, SOFTIRQ_SHIFT);
-  DEFINE(IRQ_CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
   BLANK();
   DEFINE(CPU_BOOT_TASK,		offsetof(struct secondary_data, task));
   BLANK();
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index e29e0fea63fb..76b8dd37092a 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -374,6 +374,7 @@ static const struct midr_range erratum_1463225[] = {
 static const struct midr_range trbe_overwrite_fill_mode_cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_2139208
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+	MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2119858
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
@@ -387,6 +388,7 @@ static const struct midr_range trbe_overwrite_fill_mode_cpus[] = {
 static const struct midr_range tsb_flush_fail_cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_2067961
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+	MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2054223
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
@@ -399,6 +401,7 @@ static const struct midr_range tsb_flush_fail_cpus[] = {
 static struct midr_range trbe_write_out_of_range_cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_2253138
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+	MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2224489
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
@@ -416,6 +419,19 @@ static struct midr_range broken_aarch32_aes[] = {
 };
 #endif /* CONFIG_ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE */
 
+#ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+static const struct midr_range erratum_spec_unpriv_load_list[] = {
+#ifdef CONFIG_ARM64_ERRATUM_3117295
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A510),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2966298
+	/* Cortex-A520 r0p0 to r0p1 */
+	MIDR_REV_RANGE(MIDR_CORTEX_A520, 0, 0, 1),
+#endif
+	{},
+};
+#endif
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
 	{
@@ -713,12 +729,12 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		MIDR_FIXED(MIDR_CPU_VAR_REV(1,1), BIT(25)),
 	},
 #endif
-#ifdef CONFIG_ARM64_ERRATUM_2966298
+#ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
 	{
-		.desc = "ARM erratum 2966298",
-		.capability = ARM64_WORKAROUND_2966298,
+		.desc = "ARM errata 2966298, 3117295",
+		.capability = ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD,
 		/* Cortex-A520 r0p0 - r0p1 */
-		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A520, 0, 0, 1),
+		ERRATA_MIDR_RANGE_LIST(erratum_spec_unpriv_load_list),
 	},
 #endif
 #ifdef CONFIG_AMPERE_ERRATUM_AC03_CPU_38
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 91d2d6714969..8d1a634a403e 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -1081,25 +1081,6 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
 
 	if (id_aa64pfr1_mte(info->reg_id_aa64pfr1))
 		init_cpu_ftr_reg(SYS_GMID_EL1, info->reg_gmid);
-
-	/*
-	 * Initialize the indirect array of CPU capabilities pointers before we
-	 * handle the boot CPU below.
-	 */
-	init_cpucap_indirect_list();
-
-	/*
-	 * Detect broken pseudo-NMI. Must be called _before_ the call to
-	 * setup_boot_cpu_capabilities() since it interacts with
-	 * can_use_gic_priorities().
-	 */
-	detect_system_supports_pseudo_nmi();
-
-	/*
-	 * Detect and enable early CPU capabilities based on the boot CPU,
-	 * after we have initialised the CPU feature infrastructure.
-	 */
-	setup_boot_cpu_capabilities();
 }
 
 static void update_cpu_ftr_reg(struct arm64_ftr_reg *reg, u64 new)
@@ -1584,16 +1565,6 @@ static bool has_useable_gicv3_cpuif(const struct arm64_cpu_capabilities *entry,
 	return has_sre;
 }
 
-static bool has_no_hw_prefetch(const struct arm64_cpu_capabilities *entry, int __unused)
-{
-	u32 midr = read_cpuid_id();
-
-	/* Cavium ThunderX pass 1.x and 2.x */
-	return midr_is_cpu_model_range(midr, MIDR_THUNDERX,
-		MIDR_CPU_VAR_REV(0, 0),
-		MIDR_CPU_VAR_REV(1, MIDR_REVISION_MASK));
-}
-
 static bool has_cache_idc(const struct arm64_cpu_capabilities *entry,
 			  int scope)
 {
@@ -1768,6 +1739,39 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry,
 	return !meltdown_safe;
 }
 
+#if defined(ID_AA64MMFR0_EL1_TGRAN_LPA2) && defined(ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_LPA2)
+static bool has_lpa2_at_stage1(u64 mmfr0)
+{
+	unsigned int tgran;
+
+	tgran = cpuid_feature_extract_unsigned_field(mmfr0,
+					ID_AA64MMFR0_EL1_TGRAN_SHIFT);
+	return tgran == ID_AA64MMFR0_EL1_TGRAN_LPA2;
+}
+
+static bool has_lpa2_at_stage2(u64 mmfr0)
+{
+	unsigned int tgran;
+
+	tgran = cpuid_feature_extract_unsigned_field(mmfr0,
+					ID_AA64MMFR0_EL1_TGRAN_2_SHIFT);
+	return tgran == ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_LPA2;
+}
+
+static bool has_lpa2(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	u64 mmfr0;
+
+	mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
+	return has_lpa2_at_stage1(mmfr0) && has_lpa2_at_stage2(mmfr0);
+}
+#else
+static bool has_lpa2(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	return false;
+}
+#endif
+
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
 #define KPTI_NG_TEMP_VA		(-(1UL << PMD_SHIFT))
 
@@ -1840,7 +1844,7 @@ static int __init __kpti_install_ng_mappings(void *__unused)
 static void __init kpti_install_ng_mappings(void)
 {
 	/* Check whether KPTI is going to be used */
-	if (!cpus_have_cap(ARM64_UNMAP_KERNEL_AT_EL0))
+	if (!arm64_kernel_unmapped_at_el0())
 		return;
 
 	/*
@@ -2326,12 +2330,6 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 	},
 #endif /* CONFIG_ARM64_LSE_ATOMICS */
 	{
-		.desc = "Software prefetching using PRFM",
-		.capability = ARM64_HAS_NO_HW_PREFETCH,
-		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
-		.matches = has_no_hw_prefetch,
-	},
-	{
 		.desc = "Virtualization Host Extensions",
 		.capability = ARM64_HAS_VIRT_HOST_EXTN,
 		.type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE,
@@ -2343,7 +2341,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_NESTED_VIRT,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_nested_virt_support,
-		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, NV, IMP)
+		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, NV, NV2)
 	},
 	{
 		.capability = ARM64_HAS_32BIT_EL0_DO_NOT_USE,
@@ -2735,6 +2733,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, EVT, IMP)
 	},
+	{
+		.desc = "52-bit Virtual Addressing for KVM (LPA2)",
+		.capability = ARM64_HAS_LPA2,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_lpa2,
+	},
 	{},
 };
 
@@ -3275,14 +3279,6 @@ void check_local_cpu_capabilities(void)
 		verify_local_cpu_capabilities();
 }
 
-static void __init setup_boot_cpu_capabilities(void)
-{
-	/* Detect capabilities with either SCOPE_BOOT_CPU or SCOPE_LOCAL_CPU */
-	update_cpu_capabilities(SCOPE_BOOT_CPU | SCOPE_LOCAL_CPU);
-	/* Enable the SCOPE_BOOT_CPU capabilities alone right away */
-	enable_cpu_capabilities(SCOPE_BOOT_CPU);
-}
-
 bool this_cpu_has_cap(unsigned int n)
 {
 	if (!WARN_ON(preemptible()) && n < ARM64_NCAPS) {
@@ -3338,37 +3334,52 @@ unsigned long cpu_get_elf_hwcap2(void)
 	return elf_hwcap[1];
 }
 
-void __init setup_system_features(void)
+static void __init setup_boot_cpu_capabilities(void)
 {
-	int i;
 	/*
-	 * The system-wide safe feature feature register values have been
-	 * finalized. Finalize and log the available system capabilities.
+	 * The boot CPU's feature register values have been recorded. Detect
+	 * boot cpucaps and local cpucaps for the boot CPU, then enable and
+	 * patch alternatives for the available boot cpucaps.
 	 */
-	update_cpu_capabilities(SCOPE_SYSTEM);
-	if (IS_ENABLED(CONFIG_ARM64_SW_TTBR0_PAN) &&
-	    !cpus_have_cap(ARM64_HAS_PAN))
-		pr_info("emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching\n");
+	update_cpu_capabilities(SCOPE_BOOT_CPU | SCOPE_LOCAL_CPU);
+	enable_cpu_capabilities(SCOPE_BOOT_CPU);
+	apply_boot_alternatives();
+}
 
+void __init setup_boot_cpu_features(void)
+{
 	/*
-	 * Enable all the available capabilities which have not been enabled
-	 * already.
+	 * Initialize the indirect array of CPU capabilities pointers before we
+	 * handle the boot CPU.
 	 */
-	enable_cpu_capabilities(SCOPE_ALL & ~SCOPE_BOOT_CPU);
+	init_cpucap_indirect_list();
 
-	kpti_install_ng_mappings();
+	/*
+	 * Detect broken pseudo-NMI. Must be called _before_ the call to
+	 * setup_boot_cpu_capabilities() since it interacts with
+	 * can_use_gic_priorities().
+	 */
+	detect_system_supports_pseudo_nmi();
 
-	sve_setup();
-	sme_setup();
+	setup_boot_cpu_capabilities();
+}
 
+static void __init setup_system_capabilities(void)
+{
 	/*
-	 * Check for sane CTR_EL0.CWG value.
+	 * The system-wide safe feature register values have been finalized.
+	 * Detect, enable, and patch alternatives for the available system
+	 * cpucaps.
 	 */
-	if (!cache_type_cwg())
-		pr_warn("No Cache Writeback Granule information, assuming %d\n",
-			ARCH_DMA_MINALIGN);
+	update_cpu_capabilities(SCOPE_SYSTEM);
+	enable_cpu_capabilities(SCOPE_ALL & ~SCOPE_BOOT_CPU);
+	apply_alternatives_all();
 
-	for (i = 0; i < ARM64_NCAPS; i++) {
+	/*
+	 * Log any cpucaps with a cpumask as these aren't logged by
+	 * update_cpu_capabilities().
+	 */
+	for (int i = 0; i < ARM64_NCAPS; i++) {
 		const struct arm64_cpu_capabilities *caps = cpucap_ptrs[i];
 
 		if (caps && caps->cpus && caps->desc &&
@@ -3376,6 +3387,29 @@ void __init setup_system_features(void)
 			pr_info("detected: %s on CPU%*pbl\n",
 				caps->desc, cpumask_pr_args(caps->cpus));
 	}
+
+	/*
+	 * TTBR0 PAN doesn't have its own cpucap, so log it manually.
+	 */
+	if (system_uses_ttbr0_pan())
+		pr_info("emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching\n");
+}
+
+void __init setup_system_features(void)
+{
+	setup_system_capabilities();
+
+	kpti_install_ng_mappings();
+
+	sve_setup();
+	sme_setup();
+
+	/*
+	 * Check for sane CTR_EL0.CWG value.
+	 */
+	if (!cache_type_cwg())
+		pr_warn("No Cache Writeback Granule information, assuming %d\n",
+			ARCH_DMA_MINALIGN);
 }
 
 void __init setup_user_features(void)
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index a257da7b56fe..47043c0d95ec 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -36,8 +36,6 @@ static struct cpuinfo_arm64 boot_cpu_data;
 static inline const char *icache_policy_str(int l1ip)
 {
 	switch (l1ip) {
-	case CTR_EL0_L1Ip_VPIPT:
-		return "VPIPT";
 	case CTR_EL0_L1Ip_VIPT:
 		return "VIPT";
 	case CTR_EL0_L1Ip_PIPT:
@@ -388,9 +386,6 @@ static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info)
 	switch (l1ip) {
 	case CTR_EL0_L1Ip_PIPT:
 		break;
-	case CTR_EL0_L1Ip_VPIPT:
-		set_bit(ICACHEF_VPIPT, &__icache_flags);
-		break;
 	case CTR_EL0_L1Ip_VIPT:
 	default:
 		/* Assume aliasing */
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index a6030913cd58..7ef0e127b149 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -428,16 +428,9 @@ alternative_else_nop_endif
 	ldp	x28, x29, [sp, #16 * 14]
 
 	.if	\el == 0
-alternative_if ARM64_WORKAROUND_2966298
-	tlbi	vale1, xzr
-	dsb	nsh
-alternative_else_nop_endif
-alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
-	ldr	lr, [sp, #S_LR]
-	add	sp, sp, #PT_REGS_SIZE		// restore sp
-	eret
-alternative_else_nop_endif
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+	alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0
+
 	msr	far_el1, x29
 
 	ldr_this_cpu	x30, this_cpu_vector, x29
@@ -446,16 +439,26 @@ alternative_else_nop_endif
 	ldr		lr, [sp, #S_LR]		// restore x30
 	add		sp, sp, #PT_REGS_SIZE	// restore sp
 	br		x29
+
+.L_skip_tramp_exit_\@:
 #endif
-	.else
+	.endif
+
 	ldr	lr, [sp, #S_LR]
 	add	sp, sp, #PT_REGS_SIZE		// restore sp
 
+	.if \el == 0
+	/* This must be after the last explicit memory access */
+alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	tlbi	vale1, xzr
+	dsb	nsh
+alternative_else_nop_endif
+	.else
 	/* Ensure any device/NC reads complete */
 	alternative_insn nop, "dmb sy", ARM64_WORKAROUND_1508412
+	.endif
 
 	eret
-	.endif
 	sb
 	.endm
 
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 1559c706d32d..f27acca550d5 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -85,13 +85,13 @@
  * softirq kicks in. Upon vcpu_put(), KVM will save the vcpu FP state and
  * flag the register state as invalid.
  *
- * In order to allow softirq handlers to use FPSIMD, kernel_neon_begin() may
- * save the task's FPSIMD context back to task_struct from softirq context.
- * To prevent this from racing with the manipulation of the task's FPSIMD state
- * from task context and thereby corrupting the state, it is necessary to
- * protect any manipulation of a task's fpsimd_state or TIF_FOREIGN_FPSTATE
- * flag with {, __}get_cpu_fpsimd_context(). This will still allow softirqs to
- * run but prevent them to use FPSIMD.
+ * In order to allow softirq handlers to use FPSIMD, kernel_neon_begin() may be
+ * called from softirq context, which will save the task's FPSIMD context back
+ * to task_struct. To prevent this from racing with the manipulation of the
+ * task's FPSIMD state from task context and thereby corrupting the state, it
+ * is necessary to protect any manipulation of a task's fpsimd_state or
+ * TIF_FOREIGN_FPSTATE flag with get_cpu_fpsimd_context(), which will suspend
+ * softirq servicing entirely until put_cpu_fpsimd_context() is called.
  *
  * For a certain task, the sequence may look something like this:
  * - the task gets scheduled in; if both the task's fpsimd_cpu field
@@ -209,27 +209,14 @@ static inline void sme_free(struct task_struct *t) { }
 
 #endif
 
-DEFINE_PER_CPU(bool, fpsimd_context_busy);
-EXPORT_PER_CPU_SYMBOL(fpsimd_context_busy);
-
 static void fpsimd_bind_task_to_cpu(void);
 
-static void __get_cpu_fpsimd_context(void)
-{
-	bool busy = __this_cpu_xchg(fpsimd_context_busy, true);
-
-	WARN_ON(busy);
-}
-
 /*
  * Claim ownership of the CPU FPSIMD context for use by the calling context.
  *
  * The caller may freely manipulate the FPSIMD context metadata until
  * put_cpu_fpsimd_context() is called.
  *
- * The double-underscore version must only be called if you know the task
- * can't be preempted.
- *
  * On RT kernels local_bh_disable() is not sufficient because it only
  * serializes soft interrupt related sections via a local lock, but stays
  * preemptible. Disabling preemption is the right choice here as bottom
@@ -242,14 +229,6 @@ static void get_cpu_fpsimd_context(void)
 		local_bh_disable();
 	else
 		preempt_disable();
-	__get_cpu_fpsimd_context();
-}
-
-static void __put_cpu_fpsimd_context(void)
-{
-	bool busy = __this_cpu_xchg(fpsimd_context_busy, false);
-
-	WARN_ON(!busy); /* No matching get_cpu_fpsimd_context()? */
 }
 
 /*
@@ -261,18 +240,12 @@ static void __put_cpu_fpsimd_context(void)
  */
 static void put_cpu_fpsimd_context(void)
 {
-	__put_cpu_fpsimd_context();
 	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
 		local_bh_enable();
 	else
 		preempt_enable();
 }
 
-static bool have_cpu_fpsimd_context(void)
-{
-	return !preemptible() && __this_cpu_read(fpsimd_context_busy);
-}
-
 unsigned int task_get_vl(const struct task_struct *task, enum vec_type type)
 {
 	return task->thread.vl[type];
@@ -383,7 +356,8 @@ static void task_fpsimd_load(void)
 	bool restore_ffr;
 
 	WARN_ON(!system_supports_fpsimd());
-	WARN_ON(!have_cpu_fpsimd_context());
+	WARN_ON(preemptible());
+	WARN_ON(test_thread_flag(TIF_KERNEL_FPSTATE));
 
 	if (system_supports_sve() || system_supports_sme()) {
 		switch (current->thread.fp_type) {
@@ -406,7 +380,7 @@ static void task_fpsimd_load(void)
 		default:
 			/*
 			 * This indicates either a bug in
-			 * fpsimd_save() or memory corruption, we
+			 * fpsimd_save_user_state() or memory corruption, we
 			 * should always record an explicit format
 			 * when we save. We always at least have the
 			 * memory allocated for FPSMID registers so
@@ -457,7 +431,7 @@ static void task_fpsimd_load(void)
  * than via current, if we are saving KVM state then it will have
  * ensured that the type of registers to save is set in last->to_save.
  */
-static void fpsimd_save(void)
+static void fpsimd_save_user_state(void)
 {
 	struct cpu_fp_state const *last =
 		this_cpu_ptr(&fpsimd_last_state);
@@ -467,7 +441,7 @@ static void fpsimd_save(void)
 	unsigned int vl;
 
 	WARN_ON(!system_supports_fpsimd());
-	WARN_ON(!have_cpu_fpsimd_context());
+	WARN_ON(preemptible());
 
 	if (test_thread_flag(TIF_FOREIGN_FPSTATE))
 		return;
@@ -888,7 +862,7 @@ int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 	if (task == current) {
 		get_cpu_fpsimd_context();
 
-		fpsimd_save();
+		fpsimd_save_user_state();
 	}
 
 	fpsimd_flush_task_state(task);
@@ -924,10 +898,8 @@ int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 	 * allocate SVE now in case it is needed for use in streaming
 	 * mode.
 	 */
-	if (system_supports_sve()) {
-		sve_free(task);
-		sve_alloc(task, true);
-	}
+	sve_free(task);
+	sve_alloc(task, true);
 
 	if (free_sme)
 		sme_free(task);
@@ -1171,7 +1143,7 @@ void __init sve_setup(void)
 	unsigned long b;
 	int max_bit;
 
-	if (!cpus_have_cap(ARM64_SVE))
+	if (!system_supports_sve())
 		return;
 
 	/*
@@ -1245,8 +1217,10 @@ void fpsimd_release_task(struct task_struct *dead_task)
  */
 void sme_alloc(struct task_struct *task, bool flush)
 {
-	if (task->thread.sme_state && flush) {
-		memset(task->thread.sme_state, 0, sme_state_size(task));
+	if (task->thread.sme_state) {
+		if (flush)
+			memset(task->thread.sme_state, 0,
+			       sme_state_size(task));
 		return;
 	}
 
@@ -1301,7 +1275,7 @@ void __init sme_setup(void)
 	struct vl_info *info = &vl_info[ARM64_VEC_SME];
 	int min_bit, max_bit;
 
-	if (!cpus_have_cap(ARM64_SME))
+	if (!system_supports_sme())
 		return;
 
 	/*
@@ -1337,6 +1311,22 @@ void __init sme_setup(void)
 		get_sme_default_vl());
 }
 
+void sme_suspend_exit(void)
+{
+	u64 smcr = 0;
+
+	if (!system_supports_sme())
+		return;
+
+	if (system_supports_fa64())
+		smcr |= SMCR_ELx_FA64;
+	if (system_supports_sme2())
+		smcr |= SMCR_ELx_EZT0;
+
+	write_sysreg_s(smcr, SYS_SMCR_EL1);
+	write_sysreg_s(0, SYS_SMPRI_EL1);
+}
+
 #endif /* CONFIG_ARM64_SME */
 
 static void sve_init_regs(void)
@@ -1500,6 +1490,34 @@ void do_fpsimd_exc(unsigned long esr, struct pt_regs *regs)
 		       current);
 }
 
+static void fpsimd_load_kernel_state(struct task_struct *task)
+{
+	struct cpu_fp_state *last = this_cpu_ptr(&fpsimd_last_state);
+
+	/*
+	 * Elide the load if this CPU holds the most recent kernel mode
+	 * FPSIMD context of the current task.
+	 */
+	if (last->st == &task->thread.kernel_fpsimd_state &&
+	    task->thread.kernel_fpsimd_cpu == smp_processor_id())
+		return;
+
+	fpsimd_load_state(&task->thread.kernel_fpsimd_state);
+}
+
+static void fpsimd_save_kernel_state(struct task_struct *task)
+{
+	struct cpu_fp_state cpu_fp_state = {
+		.st		= &task->thread.kernel_fpsimd_state,
+		.to_save	= FP_STATE_FPSIMD,
+	};
+
+	fpsimd_save_state(&task->thread.kernel_fpsimd_state);
+	fpsimd_bind_state_to_cpu(&cpu_fp_state);
+
+	task->thread.kernel_fpsimd_cpu = smp_processor_id();
+}
+
 void fpsimd_thread_switch(struct task_struct *next)
 {
 	bool wrong_task, wrong_cpu;
@@ -1507,24 +1525,31 @@ void fpsimd_thread_switch(struct task_struct *next)
 	if (!system_supports_fpsimd())
 		return;
 
-	__get_cpu_fpsimd_context();
+	WARN_ON_ONCE(!irqs_disabled());
 
 	/* Save unsaved fpsimd state, if any: */
-	fpsimd_save();
-
-	/*
-	 * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's
-	 * state.  For kernel threads, FPSIMD registers are never loaded
-	 * and wrong_task and wrong_cpu will always be true.
-	 */
-	wrong_task = __this_cpu_read(fpsimd_last_state.st) !=
-					&next->thread.uw.fpsimd_state;
-	wrong_cpu = next->thread.fpsimd_cpu != smp_processor_id();
+	if (test_thread_flag(TIF_KERNEL_FPSTATE))
+		fpsimd_save_kernel_state(current);
+	else
+		fpsimd_save_user_state();
 
-	update_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE,
-			       wrong_task || wrong_cpu);
+	if (test_tsk_thread_flag(next, TIF_KERNEL_FPSTATE)) {
+		fpsimd_load_kernel_state(next);
+		set_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE);
+	} else {
+		/*
+		 * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's
+		 * state.  For kernel threads, FPSIMD registers are never
+		 * loaded with user mode FPSIMD state and so wrong_task and
+		 * wrong_cpu will always be true.
+		 */
+		wrong_task = __this_cpu_read(fpsimd_last_state.st) !=
+			&next->thread.uw.fpsimd_state;
+		wrong_cpu = next->thread.fpsimd_cpu != smp_processor_id();
 
-	__put_cpu_fpsimd_context();
+		update_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE,
+				       wrong_task || wrong_cpu);
+	}
 }
 
 static void fpsimd_flush_thread_vl(enum vec_type type)
@@ -1614,7 +1639,7 @@ void fpsimd_preserve_current_state(void)
 		return;
 
 	get_cpu_fpsimd_context();
-	fpsimd_save();
+	fpsimd_save_user_state();
 	put_cpu_fpsimd_context();
 }
 
@@ -1626,7 +1651,7 @@ void fpsimd_preserve_current_state(void)
 void fpsimd_signal_preserve_current_state(void)
 {
 	fpsimd_preserve_current_state();
-	if (test_thread_flag(TIF_SVE))
+	if (current->thread.fp_type == FP_STATE_SVE)
 		sve_to_fpsimd(current);
 }
 
@@ -1826,13 +1851,15 @@ static void fpsimd_flush_cpu_state(void)
  */
 void fpsimd_save_and_flush_cpu_state(void)
 {
+	unsigned long flags;
+
 	if (!system_supports_fpsimd())
 		return;
 	WARN_ON(preemptible());
-	__get_cpu_fpsimd_context();
-	fpsimd_save();
+	local_irq_save(flags);
+	fpsimd_save_user_state();
 	fpsimd_flush_cpu_state();
-	__put_cpu_fpsimd_context();
+	local_irq_restore(flags);
 }
 
 #ifdef CONFIG_KERNEL_MODE_NEON
@@ -1864,10 +1891,37 @@ void kernel_neon_begin(void)
 	get_cpu_fpsimd_context();
 
 	/* Save unsaved fpsimd state, if any: */
-	fpsimd_save();
+	if (test_thread_flag(TIF_KERNEL_FPSTATE)) {
+		BUG_ON(IS_ENABLED(CONFIG_PREEMPT_RT) || !in_serving_softirq());
+		fpsimd_save_kernel_state(current);
+	} else {
+		fpsimd_save_user_state();
+
+		/*
+		 * Set the thread flag so that the kernel mode FPSIMD state
+		 * will be context switched along with the rest of the task
+		 * state.
+		 *
+		 * On non-PREEMPT_RT, softirqs may interrupt task level kernel
+		 * mode FPSIMD, but the task will not be preemptible so setting
+		 * TIF_KERNEL_FPSTATE for those would be both wrong (as it
+		 * would mark the task context FPSIMD state as requiring a
+		 * context switch) and unnecessary.
+		 *
+		 * On PREEMPT_RT, softirqs are serviced from a separate thread,
+		 * which is scheduled as usual, and this guarantees that these
+		 * softirqs are not interrupting use of the FPSIMD in kernel
+		 * mode in task context. So in this case, setting the flag here
+		 * is always appropriate.
+		 */
+		if (IS_ENABLED(CONFIG_PREEMPT_RT) || !in_serving_softirq())
+			set_thread_flag(TIF_KERNEL_FPSTATE);
+	}
 
 	/* Invalidate any task state remaining in the fpsimd regs: */
 	fpsimd_flush_cpu_state();
+
+	put_cpu_fpsimd_context();
 }
 EXPORT_SYMBOL_GPL(kernel_neon_begin);
 
@@ -1885,7 +1939,16 @@ void kernel_neon_end(void)
 	if (!system_supports_fpsimd())
 		return;
 
-	put_cpu_fpsimd_context();
+	/*
+	 * If we are returning from a nested use of kernel mode FPSIMD, restore
+	 * the task context kernel mode FPSIMD state. This can only happen when
+	 * running in softirq context on non-PREEMPT_RT.
+	 */
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT) && in_serving_softirq() &&
+	    test_thread_flag(TIF_KERNEL_FPSTATE))
+		fpsimd_load_kernel_state(current);
+	else
+		clear_thread_flag(TIF_KERNEL_FPSTATE);
 }
 EXPORT_SYMBOL_GPL(kernel_neon_end);
 
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 7b236994f0e1..cab7f91949d8 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -482,7 +482,7 @@ SYM_FUNC_START_LOCAL(__primary_switched)
 
 	str_l	x21, __fdt_pointer, x5		// Save FDT pointer
 
-	ldr_l	x4, kimage_vaddr		// Save the offset between
+	adrp	x4, _text			// Save the offset between
 	sub	x4, x4, x0			// the kernel virtual and
 	str_l	x4, kimage_voffset, x5		// physical mappings
 
diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c
index 3addc09f8746..e30fd9e32ef3 100644
--- a/arch/arm64/kernel/idreg-override.c
+++ b/arch/arm64/kernel/idreg-override.c
@@ -21,14 +21,25 @@
 
 static u64 __boot_status __initdata;
 
+// temporary __prel64 related definitions
+// to be removed when this code is moved under pi/
+
+#define __prel64_initconst	__initconst
+
+#define PREL64(type, name)	union { type *name; }
+
+#define prel64_pointer(__d)	(__d)
+
+typedef bool filter_t(u64 val);
+
 struct ftr_set_desc {
 	char 				name[FTR_DESC_NAME_LEN];
-	struct arm64_ftr_override	*override;
+	PREL64(struct arm64_ftr_override, override);
 	struct {
 		char			name[FTR_DESC_FIELD_LEN];
 		u8			shift;
 		u8			width;
-		bool			(*filter)(u64 val);
+		PREL64(filter_t,	filter);
 	} 				fields[];
 };
 
@@ -46,7 +57,7 @@ static bool __init mmfr1_vh_filter(u64 val)
 		 val == 0);
 }
 
-static const struct ftr_set_desc mmfr1 __initconst = {
+static const struct ftr_set_desc mmfr1 __prel64_initconst = {
 	.name		= "id_aa64mmfr1",
 	.override	= &id_aa64mmfr1_override,
 	.fields		= {
@@ -70,7 +81,7 @@ static bool __init pfr0_sve_filter(u64 val)
 	return true;
 }
 
-static const struct ftr_set_desc pfr0 __initconst = {
+static const struct ftr_set_desc pfr0 __prel64_initconst = {
 	.name		= "id_aa64pfr0",
 	.override	= &id_aa64pfr0_override,
 	.fields		= {
@@ -94,7 +105,7 @@ static bool __init pfr1_sme_filter(u64 val)
 	return true;
 }
 
-static const struct ftr_set_desc pfr1 __initconst = {
+static const struct ftr_set_desc pfr1 __prel64_initconst = {
 	.name		= "id_aa64pfr1",
 	.override	= &id_aa64pfr1_override,
 	.fields		= {
@@ -105,7 +116,7 @@ static const struct ftr_set_desc pfr1 __initconst = {
 	},
 };
 
-static const struct ftr_set_desc isar1 __initconst = {
+static const struct ftr_set_desc isar1 __prel64_initconst = {
 	.name		= "id_aa64isar1",
 	.override	= &id_aa64isar1_override,
 	.fields		= {
@@ -117,7 +128,7 @@ static const struct ftr_set_desc isar1 __initconst = {
 	},
 };
 
-static const struct ftr_set_desc isar2 __initconst = {
+static const struct ftr_set_desc isar2 __prel64_initconst = {
 	.name		= "id_aa64isar2",
 	.override	= &id_aa64isar2_override,
 	.fields		= {
@@ -128,7 +139,7 @@ static const struct ftr_set_desc isar2 __initconst = {
 	},
 };
 
-static const struct ftr_set_desc smfr0 __initconst = {
+static const struct ftr_set_desc smfr0 __prel64_initconst = {
 	.name		= "id_aa64smfr0",
 	.override	= &id_aa64smfr0_override,
 	.fields		= {
@@ -149,7 +160,7 @@ static bool __init hvhe_filter(u64 val)
 						     ID_AA64MMFR1_EL1_VH_SHIFT));
 }
 
-static const struct ftr_set_desc sw_features __initconst = {
+static const struct ftr_set_desc sw_features __prel64_initconst = {
 	.name		= "arm64_sw",
 	.override	= &arm64_sw_feature_override,
 	.fields		= {
@@ -159,22 +170,23 @@ static const struct ftr_set_desc sw_features __initconst = {
 	},
 };
 
-static const struct ftr_set_desc * const regs[] __initconst = {
-	&mmfr1,
-	&pfr0,
-	&pfr1,
-	&isar1,
-	&isar2,
-	&smfr0,
-	&sw_features,
+static const
+PREL64(const struct ftr_set_desc, reg) regs[] __prel64_initconst = {
+	{ &mmfr1	},
+	{ &pfr0 	},
+	{ &pfr1 	},
+	{ &isar1	},
+	{ &isar2	},
+	{ &smfr0	},
+	{ &sw_features	},
 };
 
 static const struct {
 	char	alias[FTR_ALIAS_NAME_LEN];
 	char	feature[FTR_ALIAS_OPTION_LEN];
 } aliases[] __initconst = {
-	{ "kvm-arm.mode=nvhe",		"id_aa64mmfr1.vh=0" },
-	{ "kvm-arm.mode=protected",	"id_aa64mmfr1.vh=0" },
+	{ "kvm_arm.mode=nvhe",		"id_aa64mmfr1.vh=0" },
+	{ "kvm_arm.mode=protected",	"id_aa64mmfr1.vh=0" },
 	{ "arm64.nosve",		"id_aa64pfr0.sve=0" },
 	{ "arm64.nosme",		"id_aa64pfr1.sme=0" },
 	{ "arm64.nobti",		"id_aa64pfr1.bt=0" },
@@ -187,45 +199,61 @@ static const struct {
 	{ "nokaslr",			"arm64_sw.nokaslr=1" },
 };
 
-static int __init parse_nokaslr(char *unused)
+static int __init parse_hexdigit(const char *p, u64 *v)
 {
-	/* nokaslr param handling is done by early cpufeature code */
+	// skip "0x" if it comes next
+	if (p[0] == '0' && tolower(p[1]) == 'x')
+		p += 2;
+
+	// check whether the RHS is a single hex digit
+	if (!isxdigit(p[0]) || (p[1] && !isspace(p[1])))
+		return -EINVAL;
+
+	*v = tolower(*p) - (isdigit(*p) ? '0' : 'a' - 10);
 	return 0;
 }
-early_param("nokaslr", parse_nokaslr);
 
-static int __init find_field(const char *cmdline,
+static int __init find_field(const char *cmdline, char *opt, int len,
 			     const struct ftr_set_desc *reg, int f, u64 *v)
 {
-	char opt[FTR_DESC_NAME_LEN + FTR_DESC_FIELD_LEN + 2];
-	int len;
+	int flen = strlen(reg->fields[f].name);
 
-	len = snprintf(opt, ARRAY_SIZE(opt), "%s.%s=",
-		       reg->name, reg->fields[f].name);
+	// append '<fieldname>=' to obtain '<name>.<fieldname>='
+	memcpy(opt + len, reg->fields[f].name, flen);
+	len += flen;
+	opt[len++] = '=';
 
-	if (!parameqn(cmdline, opt, len))
+	if (memcmp(cmdline, opt, len))
 		return -1;
 
-	return kstrtou64(cmdline + len, 0, v);
+	return parse_hexdigit(cmdline + len, v);
 }
 
 static void __init match_options(const char *cmdline)
 {
+	char opt[FTR_DESC_NAME_LEN + FTR_DESC_FIELD_LEN + 2];
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
+		const struct ftr_set_desc *reg = prel64_pointer(regs[i].reg);
+		struct arm64_ftr_override *override;
+		int len = strlen(reg->name);
 		int f;
 
-		if (!regs[i]->override)
-			continue;
+		override = prel64_pointer(reg->override);
 
-		for (f = 0; strlen(regs[i]->fields[f].name); f++) {
-			u64 shift = regs[i]->fields[f].shift;
-			u64 width = regs[i]->fields[f].width ?: 4;
+		// set opt[] to '<name>.'
+		memcpy(opt, reg->name, len);
+		opt[len++] = '.';
+
+		for (f = 0; reg->fields[f].name[0] != '\0'; f++) {
+			u64 shift = reg->fields[f].shift;
+			u64 width = reg->fields[f].width ?: 4;
 			u64 mask = GENMASK_ULL(shift + width - 1, shift);
+			bool (*filter)(u64 val);
 			u64 v;
 
-			if (find_field(cmdline, regs[i], f, &v))
+			if (find_field(cmdline, opt, len, reg, f, &v))
 				continue;
 
 			/*
@@ -233,16 +261,16 @@ static void __init match_options(const char *cmdline)
 			 * it by setting the value to the all-ones while
 			 * clearing the mask... Yes, this is fragile.
 			 */
-			if (regs[i]->fields[f].filter &&
-			    !regs[i]->fields[f].filter(v)) {
-				regs[i]->override->val  |= mask;
-				regs[i]->override->mask &= ~mask;
+			filter = prel64_pointer(reg->fields[f].filter);
+			if (filter && !filter(v)) {
+				override->val  |= mask;
+				override->mask &= ~mask;
 				continue;
 			}
 
-			regs[i]->override->val  &= ~mask;
-			regs[i]->override->val  |= (v << shift) & mask;
-			regs[i]->override->mask |= mask;
+			override->val  &= ~mask;
+			override->val  |= (v << shift) & mask;
+			override->mask |= mask;
 
 			return;
 		}
@@ -258,23 +286,29 @@ static __init void __parse_cmdline(const char *cmdline, bool parse_aliases)
 
 		cmdline = skip_spaces(cmdline);
 
-		for (len = 0; cmdline[len] && !isspace(cmdline[len]); len++);
-		if (!len)
+		/* terminate on "--" appearing on the command line by itself */
+		if (cmdline[0] == '-' && cmdline[1] == '-' && isspace(cmdline[2]))
 			return;
 
-		len = min(len, ARRAY_SIZE(buf) - 1);
-		memcpy(buf, cmdline, len);
-		buf[len] = '\0';
-
-		if (strcmp(buf, "--") == 0)
+		for (len = 0; cmdline[len] && !isspace(cmdline[len]); len++) {
+			if (len >= sizeof(buf) - 1)
+				break;
+			if (cmdline[len] == '-')
+				buf[len] = '_';
+			else
+				buf[len] = cmdline[len];
+		}
+		if (!len)
 			return;
 
+		buf[len] = 0;
+
 		cmdline += len;
 
 		match_options(buf);
 
 		for (i = 0; parse_aliases && i < ARRAY_SIZE(aliases); i++)
-			if (parameq(buf, aliases[i].alias))
+			if (!memcmp(buf, aliases[i].alias, len + 1))
 				__parse_cmdline(aliases[i].feature, false);
 	} while (1);
 }
@@ -316,13 +350,16 @@ void init_feature_override(u64 boot_status);
 
 asmlinkage void __init init_feature_override(u64 boot_status)
 {
+	struct arm64_ftr_override *override;
+	const struct ftr_set_desc *reg;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
-		if (regs[i]->override) {
-			regs[i]->override->val  = 0;
-			regs[i]->override->mask = 0;
-		}
+		reg = prel64_pointer(regs[i].reg);
+		override = prel64_pointer(reg->override);
+
+		override->val  = 0;
+		override->mask = 0;
 	}
 
 	__boot_status = boot_status;
@@ -330,9 +367,9 @@ asmlinkage void __init init_feature_override(u64 boot_status)
 	parse_cmdline();
 
 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
-		if (regs[i]->override)
-			dcache_clean_inval_poc((unsigned long)regs[i]->override,
-					    (unsigned long)regs[i]->override +
-					    sizeof(*regs[i]->override));
+		reg = prel64_pointer(regs[i].reg);
+		override = prel64_pointer(reg->override);
+		dcache_clean_inval_poc((unsigned long)override,
+				       (unsigned long)(override + 1));
 	}
 }
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index 6ad5c6ef5329..85087e2df564 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -22,6 +22,7 @@
 #include <linux/vmalloc.h>
 #include <asm/daifflags.h>
 #include <asm/exception.h>
+#include <asm/numa.h>
 #include <asm/softirq_stack.h>
 #include <asm/stacktrace.h>
 #include <asm/vmap_stack.h>
@@ -47,17 +48,17 @@ static void init_irq_scs(void)
 
 	for_each_possible_cpu(cpu)
 		per_cpu(irq_shadow_call_stack_ptr, cpu) =
-			scs_alloc(cpu_to_node(cpu));
+			scs_alloc(early_cpu_to_node(cpu));
 }
 
 #ifdef CONFIG_VMAP_STACK
-static void init_irq_stacks(void)
+static void __init init_irq_stacks(void)
 {
 	int cpu;
 	unsigned long *p;
 
 	for_each_possible_cpu(cpu) {
-		p = arch_alloc_vmap_stack(IRQ_STACK_SIZE, cpu_to_node(cpu));
+		p = arch_alloc_vmap_stack(IRQ_STACK_SIZE, early_cpu_to_node(cpu));
 		per_cpu(irq_stack_ptr, cpu) = p;
 	}
 }
diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c
index 94a269cd1f07..12c7f3c8ba76 100644
--- a/arch/arm64/kernel/kaslr.c
+++ b/arch/arm64/kernel/kaslr.c
@@ -36,3 +36,10 @@ void __init kaslr_init(void)
 	pr_info("KASLR enabled\n");
 	__kaslr_is_enabled = true;
 }
+
+static int __init parse_nokaslr(char *unused)
+{
+	/* nokaslr param handling is done by early cpufeature code */
+	return 0;
+}
+early_param("nokaslr", parse_nokaslr);
diff --git a/arch/arm64/kernel/kexec_image.c b/arch/arm64/kernel/kexec_image.c
index 636be6715155..532d72ea42ee 100644
--- a/arch/arm64/kernel/kexec_image.c
+++ b/arch/arm64/kernel/kexec_image.c
@@ -122,9 +122,9 @@ static void *image_load(struct kimage *image,
 	kernel_segment->memsz -= text_offset;
 	image->start = kernel_segment->mem;
 
-	pr_debug("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-				kernel_segment->mem, kbuf.bufsz,
-				kernel_segment->memsz);
+	kexec_dprintk("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		      kernel_segment->mem, kbuf.bufsz,
+		      kernel_segment->memsz);
 
 	return NULL;
 }
diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c
index 078910db77a4..b38aae5b488d 100644
--- a/arch/arm64/kernel/machine_kexec.c
+++ b/arch/arm64/kernel/machine_kexec.c
@@ -32,26 +32,12 @@
 static void _kexec_image_info(const char *func, int line,
 	const struct kimage *kimage)
 {
-	unsigned long i;
-
-	pr_debug("%s:%d:\n", func, line);
-	pr_debug("  kexec kimage info:\n");
-	pr_debug("    type:        %d\n", kimage->type);
-	pr_debug("    start:       %lx\n", kimage->start);
-	pr_debug("    head:        %lx\n", kimage->head);
-	pr_debug("    nr_segments: %lu\n", kimage->nr_segments);
-	pr_debug("    dtb_mem: %pa\n", &kimage->arch.dtb_mem);
-	pr_debug("    kern_reloc: %pa\n", &kimage->arch.kern_reloc);
-	pr_debug("    el2_vectors: %pa\n", &kimage->arch.el2_vectors);
-
-	for (i = 0; i < kimage->nr_segments; i++) {
-		pr_debug("      segment[%lu]: %016lx - %016lx, 0x%lx bytes, %lu pages\n",
-			i,
-			kimage->segment[i].mem,
-			kimage->segment[i].mem + kimage->segment[i].memsz,
-			kimage->segment[i].memsz,
-			kimage->segment[i].memsz /  PAGE_SIZE);
-	}
+	kexec_dprintk("%s:%d:\n", func, line);
+	kexec_dprintk("  kexec kimage info:\n");
+	kexec_dprintk("    type:        %d\n", kimage->type);
+	kexec_dprintk("    head:        %lx\n", kimage->head);
+	kexec_dprintk("    kern_reloc: %pa\n", &kimage->arch.kern_reloc);
+	kexec_dprintk("    el2_vectors: %pa\n", &kimage->arch.el2_vectors);
 }
 
 void machine_kexec_cleanup(struct kimage *kimage)
diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c
index a11a6e14ba89..0e017358f4ba 100644
--- a/arch/arm64/kernel/machine_kexec_file.c
+++ b/arch/arm64/kernel/machine_kexec_file.c
@@ -127,8 +127,8 @@ int load_other_segments(struct kimage *image,
 		image->elf_load_addr = kbuf.mem;
 		image->elf_headers_sz = headers_sz;
 
-		pr_debug("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-			 image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
+		kexec_dprintk("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			      image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
 	}
 
 	/* load initrd */
@@ -148,8 +148,8 @@ int load_other_segments(struct kimage *image,
 			goto out_err;
 		initrd_load_addr = kbuf.mem;
 
-		pr_debug("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-				initrd_load_addr, kbuf.bufsz, kbuf.memsz);
+		kexec_dprintk("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			      initrd_load_addr, kbuf.bufsz, kbuf.memsz);
 	}
 
 	/* load dtb */
@@ -179,8 +179,8 @@ int load_other_segments(struct kimage *image,
 	image->arch.dtb = dtb;
 	image->arch.dtb_mem = kbuf.mem;
 
-	pr_debug("Loaded dtb at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-			kbuf.mem, kbuf.bufsz, kbuf.memsz);
+	kexec_dprintk("Loaded dtb at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		      kbuf.mem, kbuf.bufsz, kbuf.memsz);
 
 	return 0;
 
diff --git a/arch/arm64/kernel/pi/Makefile b/arch/arm64/kernel/pi/Makefile
index 4c0ea3cd4ea4..c844a0546d7f 100644
--- a/arch/arm64/kernel/pi/Makefile
+++ b/arch/arm64/kernel/pi/Makefile
@@ -3,6 +3,7 @@
 
 KBUILD_CFLAGS	:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) -fpie \
 		   -Os -DDISABLE_BRANCH_PROFILING $(DISABLE_STACKLEAK_PLUGIN) \
+		   $(DISABLE_LATENT_ENTROPY_PLUGIN) \
 		   $(call cc-option,-mbranch-protection=none) \
 		   -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
 		   -include $(srctree)/include/linux/hidden.h \
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 20d7ef82de90..e3bef38fc2e2 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -28,6 +28,7 @@
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
 #include <linux/elf.h>
+#include <linux/rseq.h>
 
 #include <asm/compat.h>
 #include <asm/cpufeature.h>
@@ -1107,12 +1108,13 @@ static int za_set(struct task_struct *target,
 		}
 	}
 
-	/* Allocate/reinit ZA storage */
-	sme_alloc(target, true);
-	if (!target->thread.sme_state) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	/*
+	 * Only flush the storage if PSTATE.ZA was not already set,
+	 * otherwise preserve any existing data.
+	 */
+	sme_alloc(target, !thread_za_enabled(&target->thread));
+	if (!target->thread.sme_state)
+		return -ENOMEM;
 
 	/* If there is no data then disable ZA */
 	if (!count) {
@@ -1498,7 +1500,8 @@ static const struct user_regset aarch64_regsets[] = {
 #ifdef CONFIG_ARM64_SVE
 	[REGSET_SVE] = { /* Scalable Vector Extension */
 		.core_note_type = NT_ARM_SVE,
-		.n = DIV_ROUND_UP(SVE_PT_SIZE(SVE_VQ_MAX, SVE_PT_REGS_SVE),
+		.n = DIV_ROUND_UP(SVE_PT_SIZE(ARCH_SVE_VQ_MAX,
+					      SVE_PT_REGS_SVE),
 				  SVE_VQ_BYTES),
 		.size = SVE_VQ_BYTES,
 		.align = SVE_VQ_BYTES,
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 417a8a86b2db..42c690bb2d60 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -402,19 +402,10 @@ static inline bool cpu_can_disable(unsigned int cpu)
 	return false;
 }
 
-static int __init topology_init(void)
+bool arch_cpu_is_hotpluggable(int num)
 {
-	int i;
-
-	for_each_possible_cpu(i) {
-		struct cpu *cpu = &per_cpu(cpu_data.cpu, i);
-		cpu->hotpluggable = cpu_can_disable(i);
-		register_cpu(cpu, i);
-	}
-
-	return 0;
+	return cpu_can_disable(num);
 }
-subsys_initcall(topology_init);
 
 static void dump_kernel_offset(void)
 {
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 0e8beb3349ea..425b1bc17a3f 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -242,7 +242,7 @@ static int preserve_sve_context(struct sve_context __user *ctx)
 		vl = task_get_sme_vl(current);
 		vq = sve_vq_from_vl(vl);
 		flags |= SVE_SIG_FLAG_SM;
-	} else if (test_thread_flag(TIF_SVE)) {
+	} else if (current->thread.fp_type == FP_STATE_SVE) {
 		vq = sve_vq_from_vl(vl);
 	}
 
@@ -878,7 +878,7 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
 	if (system_supports_sve() || system_supports_sme()) {
 		unsigned int vq = 0;
 
-		if (add_all || test_thread_flag(TIF_SVE) ||
+		if (add_all || current->thread.fp_type == FP_STATE_SVE ||
 		    thread_sm_enabled(&current->thread)) {
 			int vl = max(sve_max_vl(), sme_max_vl());
 
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index defbab84e9e5..4ced34f62dab 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -439,9 +439,8 @@ static void __init hyp_mode_check(void)
 void __init smp_cpus_done(unsigned int max_cpus)
 {
 	pr_info("SMP: Total of %d processors activated.\n", num_online_cpus());
-	setup_system_features();
 	hyp_mode_check();
-	apply_alternatives_all();
+	setup_system_features();
 	setup_user_features();
 	mark_linear_text_alias_ro();
 }
@@ -454,14 +453,9 @@ void __init smp_prepare_boot_cpu(void)
 	 * freed shortly, so we must move over to the runtime per-cpu area.
 	 */
 	set_my_cpu_offset(per_cpu_offset(smp_processor_id()));
-	cpuinfo_store_boot_cpu();
 
-	/*
-	 * We now know enough about the boot CPU to apply the
-	 * alternatives that cannot wait until interrupt handling
-	 * and/or scheduling is enabled.
-	 */
-	apply_boot_alternatives();
+	cpuinfo_store_boot_cpu();
+	setup_boot_cpu_features();
 
 	/* Conditionally switch to GIC PMR for interrupt masking */
 	if (system_uses_irq_prio_masking())
diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c
index 17f66a74c745..b2a60e0bcfd2 100644
--- a/arch/arm64/kernel/stacktrace.c
+++ b/arch/arm64/kernel/stacktrace.c
@@ -8,6 +8,7 @@
 #include <linux/efi.h>
 #include <linux/export.h>
 #include <linux/ftrace.h>
+#include <linux/kprobes.h>
 #include <linux/sched.h>
 #include <linux/sched/debug.h>
 #include <linux/sched/task_stack.h>
@@ -19,6 +20,31 @@
 #include <asm/stacktrace.h>
 
 /*
+ * Kernel unwind state
+ *
+ * @common:      Common unwind state.
+ * @task:        The task being unwound.
+ * @kr_cur:      When KRETPROBES is selected, holds the kretprobe instance
+ *               associated with the most recently encountered replacement lr
+ *               value.
+ */
+struct kunwind_state {
+	struct unwind_state common;
+	struct task_struct *task;
+#ifdef CONFIG_KRETPROBES
+	struct llist_node *kr_cur;
+#endif
+};
+
+static __always_inline void
+kunwind_init(struct kunwind_state *state,
+	     struct task_struct *task)
+{
+	unwind_init_common(&state->common);
+	state->task = task;
+}
+
+/*
  * Start an unwind from a pt_regs.
  *
  * The unwind will begin at the PC within the regs.
@@ -26,13 +52,13 @@
  * The regs must be on a stack currently owned by the calling task.
  */
 static __always_inline void
-unwind_init_from_regs(struct unwind_state *state,
-		      struct pt_regs *regs)
+kunwind_init_from_regs(struct kunwind_state *state,
+		       struct pt_regs *regs)
 {
-	unwind_init_common(state, current);
+	kunwind_init(state, current);
 
-	state->fp = regs->regs[29];
-	state->pc = regs->pc;
+	state->common.fp = regs->regs[29];
+	state->common.pc = regs->pc;
 }
 
 /*
@@ -44,12 +70,12 @@ unwind_init_from_regs(struct unwind_state *state,
  * The function which invokes this must be noinline.
  */
 static __always_inline void
-unwind_init_from_caller(struct unwind_state *state)
+kunwind_init_from_caller(struct kunwind_state *state)
 {
-	unwind_init_common(state, current);
+	kunwind_init(state, current);
 
-	state->fp = (unsigned long)__builtin_frame_address(1);
-	state->pc = (unsigned long)__builtin_return_address(0);
+	state->common.fp = (unsigned long)__builtin_frame_address(1);
+	state->common.pc = (unsigned long)__builtin_return_address(0);
 }
 
 /*
@@ -63,35 +89,38 @@ unwind_init_from_caller(struct unwind_state *state)
  * call this for the current task.
  */
 static __always_inline void
-unwind_init_from_task(struct unwind_state *state,
-		      struct task_struct *task)
+kunwind_init_from_task(struct kunwind_state *state,
+		       struct task_struct *task)
 {
-	unwind_init_common(state, task);
+	kunwind_init(state, task);
 
-	state->fp = thread_saved_fp(task);
-	state->pc = thread_saved_pc(task);
+	state->common.fp = thread_saved_fp(task);
+	state->common.pc = thread_saved_pc(task);
 }
 
 static __always_inline int
-unwind_recover_return_address(struct unwind_state *state)
+kunwind_recover_return_address(struct kunwind_state *state)
 {
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	if (state->task->ret_stack &&
-	    (state->pc == (unsigned long)return_to_handler)) {
+	    (state->common.pc == (unsigned long)return_to_handler)) {
 		unsigned long orig_pc;
-		orig_pc = ftrace_graph_ret_addr(state->task, NULL, state->pc,
-						(void *)state->fp);
-		if (WARN_ON_ONCE(state->pc == orig_pc))
+		orig_pc = ftrace_graph_ret_addr(state->task, NULL,
+						state->common.pc,
+						(void *)state->common.fp);
+		if (WARN_ON_ONCE(state->common.pc == orig_pc))
 			return -EINVAL;
-		state->pc = orig_pc;
+		state->common.pc = orig_pc;
 	}
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
 #ifdef CONFIG_KRETPROBES
-	if (is_kretprobe_trampoline(state->pc)) {
-		state->pc = kretprobe_find_ret_addr(state->task,
-						    (void *)state->fp,
-						    &state->kr_cur);
+	if (is_kretprobe_trampoline(state->common.pc)) {
+		unsigned long orig_pc;
+		orig_pc = kretprobe_find_ret_addr(state->task,
+						  (void *)state->common.fp,
+						  &state->kr_cur);
+		state->common.pc = orig_pc;
 	}
 #endif /* CONFIG_KRETPROBES */
 
@@ -106,38 +135,40 @@ unwind_recover_return_address(struct unwind_state *state)
  * and the location (but not the fp value) of B.
  */
 static __always_inline int
-unwind_next(struct unwind_state *state)
+kunwind_next(struct kunwind_state *state)
 {
 	struct task_struct *tsk = state->task;
-	unsigned long fp = state->fp;
+	unsigned long fp = state->common.fp;
 	int err;
 
 	/* Final frame; nothing to unwind */
 	if (fp == (unsigned long)task_pt_regs(tsk)->stackframe)
 		return -ENOENT;
 
-	err = unwind_next_frame_record(state);
+	err = unwind_next_frame_record(&state->common);
 	if (err)
 		return err;
 
-	state->pc = ptrauth_strip_kernel_insn_pac(state->pc);
+	state->common.pc = ptrauth_strip_kernel_insn_pac(state->common.pc);
 
-	return unwind_recover_return_address(state);
+	return kunwind_recover_return_address(state);
 }
 
+typedef bool (*kunwind_consume_fn)(const struct kunwind_state *state, void *cookie);
+
 static __always_inline void
-unwind(struct unwind_state *state, stack_trace_consume_fn consume_entry,
-       void *cookie)
+do_kunwind(struct kunwind_state *state, kunwind_consume_fn consume_state,
+	   void *cookie)
 {
-	if (unwind_recover_return_address(state))
+	if (kunwind_recover_return_address(state))
 		return;
 
 	while (1) {
 		int ret;
 
-		if (!consume_entry(cookie, state->pc))
+		if (!consume_state(state, cookie))
 			break;
-		ret = unwind_next(state);
+		ret = kunwind_next(state);
 		if (ret < 0)
 			break;
 	}
@@ -172,9 +203,10 @@ unwind(struct unwind_state *state, stack_trace_consume_fn consume_entry,
 			: stackinfo_get_unknown();		\
 	})
 
-noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
-			      void *cookie, struct task_struct *task,
-			      struct pt_regs *regs)
+static __always_inline void
+kunwind_stack_walk(kunwind_consume_fn consume_state,
+		   void *cookie, struct task_struct *task,
+		   struct pt_regs *regs)
 {
 	struct stack_info stacks[] = {
 		stackinfo_get_task(task),
@@ -190,22 +222,48 @@ noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
 		STACKINFO_EFI,
 #endif
 	};
-	struct unwind_state state = {
-		.stacks = stacks,
-		.nr_stacks = ARRAY_SIZE(stacks),
+	struct kunwind_state state = {
+		.common = {
+			.stacks = stacks,
+			.nr_stacks = ARRAY_SIZE(stacks),
+		},
 	};
 
 	if (regs) {
 		if (task != current)
 			return;
-		unwind_init_from_regs(&state, regs);
+		kunwind_init_from_regs(&state, regs);
 	} else if (task == current) {
-		unwind_init_from_caller(&state);
+		kunwind_init_from_caller(&state);
 	} else {
-		unwind_init_from_task(&state, task);
+		kunwind_init_from_task(&state, task);
 	}
 
-	unwind(&state, consume_entry, cookie);
+	do_kunwind(&state, consume_state, cookie);
+}
+
+struct kunwind_consume_entry_data {
+	stack_trace_consume_fn consume_entry;
+	void *cookie;
+};
+
+static __always_inline bool
+arch_kunwind_consume_entry(const struct kunwind_state *state, void *cookie)
+{
+	struct kunwind_consume_entry_data *data = cookie;
+	return data->consume_entry(data->cookie, state->common.pc);
+}
+
+noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
+			      void *cookie, struct task_struct *task,
+			      struct pt_regs *regs)
+{
+	struct kunwind_consume_entry_data data = {
+		.consume_entry = consume_entry,
+		.cookie = cookie,
+	};
+
+	kunwind_stack_walk(arch_kunwind_consume_entry, &data, task, regs);
 }
 
 static bool dump_backtrace_entry(void *arg, unsigned long where)
diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c
index eca4d0435211..eaaff94329cd 100644
--- a/arch/arm64/kernel/suspend.c
+++ b/arch/arm64/kernel/suspend.c
@@ -12,6 +12,7 @@
 #include <asm/daifflags.h>
 #include <asm/debug-monitors.h>
 #include <asm/exec.h>
+#include <asm/fpsimd.h>
 #include <asm/mte.h>
 #include <asm/memory.h>
 #include <asm/mmu_context.h>
@@ -80,6 +81,8 @@ void notrace __cpu_suspend_exit(void)
 	 */
 	spectre_v4_enable_mitigation(NULL);
 
+	sme_suspend_exit();
+
 	/* Restore additional feature-specific configuration */
 	ptrauth_suspend_exit();
 }
diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c
index 817d788cd866..1a2c72f3e7f8 100644
--- a/arch/arm64/kernel/topology.c
+++ b/arch/arm64/kernel/topology.c
@@ -82,7 +82,12 @@ int __init parse_acpi_topology(void)
 #undef pr_fmt
 #define pr_fmt(fmt) "AMU: " fmt
 
-static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, arch_max_freq_scale);
+/*
+ * Ensure that amu_scale_freq_tick() will return SCHED_CAPACITY_SCALE until
+ * the CPU capacity and its associated frequency have been correctly
+ * initialized.
+ */
+static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, arch_max_freq_scale) =  1UL << (2 * SCHED_CAPACITY_SHIFT);
 static DEFINE_PER_CPU(u64, arch_const_cycles_prev);
 static DEFINE_PER_CPU(u64, arch_core_cycles_prev);
 static cpumask_var_t amu_fie_cpus;
@@ -112,14 +117,14 @@ static inline bool freq_counters_valid(int cpu)
 	return true;
 }
 
-static int freq_inv_set_max_ratio(int cpu, u64 max_rate, u64 ref_rate)
+void freq_inv_set_max_ratio(int cpu, u64 max_rate)
 {
-	u64 ratio;
+	u64 ratio, ref_rate = arch_timer_get_rate();
 
 	if (unlikely(!max_rate || !ref_rate)) {
-		pr_debug("CPU%d: invalid maximum or reference frequency.\n",
+		WARN_ONCE(1, "CPU%d: invalid maximum or reference frequency.\n",
 			 cpu);
-		return -EINVAL;
+		return;
 	}
 
 	/*
@@ -139,12 +144,10 @@ static int freq_inv_set_max_ratio(int cpu, u64 max_rate, u64 ref_rate)
 	ratio = div64_u64(ratio, max_rate);
 	if (!ratio) {
 		WARN_ONCE(1, "Reference frequency too low.\n");
-		return -EINVAL;
+		return;
 	}
 
-	per_cpu(arch_max_freq_scale, cpu) = (unsigned long)ratio;
-
-	return 0;
+	WRITE_ONCE(per_cpu(arch_max_freq_scale, cpu), (unsigned long)ratio);
 }
 
 static void amu_scale_freq_tick(void)
@@ -195,10 +198,7 @@ static void amu_fie_setup(const struct cpumask *cpus)
 		return;
 
 	for_each_cpu(cpu, cpus) {
-		if (!freq_counters_valid(cpu) ||
-		    freq_inv_set_max_ratio(cpu,
-					   cpufreq_get_hw_max_freq(cpu) * 1000ULL,
-					   arch_timer_get_rate()))
+		if (!freq_counters_valid(cpu))
 			return;
 	}
 
diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
index 1f911a76c5af..f5f80fdce0fe 100644
--- a/arch/arm64/kernel/vdso32/Makefile
+++ b/arch/arm64/kernel/vdso32/Makefile
@@ -118,7 +118,7 @@ endif
 VDSO_CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os
 
 # Build rules
-targets := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso) vdso.so vdso.so.dbg vdso.so.raw
+targets := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso) vdso.so vdso32.so.dbg vdso.so.raw
 c-obj-vdso := $(addprefix $(obj)/, $(c-obj-vdso))
 c-obj-vdso-gettimeofday := $(addprefix $(obj)/, $(c-obj-vdso-gettimeofday))
 asm-obj-vdso := $(addprefix $(obj)/, $(asm-obj-vdso))
@@ -127,15 +127,12 @@ obj-vdso := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso)
 targets += vdso.lds
 CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
 
-include/generated/vdso32-offsets.h: $(obj)/vdso.so.dbg FORCE
-	$(call if_changed,vdsosym)
-
 # Strip rule for vdso.so
 $(obj)/vdso.so: OBJCOPYFLAGS := -S
-$(obj)/vdso.so: $(obj)/vdso.so.dbg FORCE
+$(obj)/vdso.so: $(obj)/vdso32.so.dbg FORCE
 	$(call if_changed,objcopy)
 
-$(obj)/vdso.so.dbg: $(obj)/vdso.so.raw $(obj)/$(munge) FORCE
+$(obj)/vdso32.so.dbg: $(obj)/vdso.so.raw $(obj)/$(munge) FORCE
 	$(call if_changed,vdsomunge)
 
 # Link rule for the .so file, .lds has to be first
@@ -166,9 +163,3 @@ quiet_cmd_vdsoas = AS32    $@
 
 quiet_cmd_vdsomunge = MUNGE   $@
       cmd_vdsomunge = $(obj)/$(munge) $< $@
-
-# Generate vDSO offsets using helper script (borrowed from the 64-bit vDSO)
-gen-vdsosym := $(srctree)/$(src)/../vdso/gen_vdso_offsets.sh
-quiet_cmd_vdsosym = VDSOSYM $@
-# The AArch64 nm should be able to read an AArch32 binary
-      cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
diff --git a/arch/arm64/kernel/vdso32/vgettimeofday.c b/arch/arm64/kernel/vdso32/vgettimeofday.c
index 5acff29c5991..29b4d8f61e39 100644
--- a/arch/arm64/kernel/vdso32/vgettimeofday.c
+++ b/arch/arm64/kernel/vdso32/vgettimeofday.c
@@ -5,6 +5,8 @@
  * Copyright (C) 2018 ARM Limited
  *
  */
+#define BUILD_VDSO32_64
+#include <vdso/gettime.h>
 
 int __vdso_clock_gettime(clockid_t clock,
 			 struct old_timespec32 *ts)
diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
index 83c1e09be42e..27ca89b628a0 100644
--- a/arch/arm64/kvm/Kconfig
+++ b/arch/arm64/kvm/Kconfig
@@ -3,7 +3,6 @@
 # KVM configuration
 #
 
-source "virt/lib/Kconfig"
 source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
@@ -21,16 +20,14 @@ if VIRTUALIZATION
 menuconfig KVM
 	bool "Kernel-based Virtual Machine (KVM) support"
 	depends on HAVE_KVM
+	select KVM_COMMON
 	select KVM_GENERIC_HARDWARE_ENABLING
-	select MMU_NOTIFIER
-	select PREEMPT_NOTIFIERS
+	select KVM_GENERIC_MMU_NOTIFIER
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select KVM_MMIO
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
 	select KVM_XFER_TO_GUEST_WORK
 	select KVM_VFIO
-	select HAVE_KVM_EVENTFD
-	select HAVE_KVM_IRQFD
 	select HAVE_KVM_DIRTY_RING_ACQ_REL
 	select NEED_KVM_DIRTY_RING_WITH_BITMAP
 	select HAVE_KVM_MSI
@@ -41,7 +38,6 @@ menuconfig KVM
 	select HAVE_KVM_VCPU_RUN_PID_CHANGE
 	select SCHED_INFO
 	select GUEST_PERF_EVENTS if PERF_EVENTS
-	select INTERVAL_TREE
 	select XARRAY_MULTI
 	help
 	  Support hosting virtualized guest machines.
diff --git a/arch/arm64/kvm/arch_timer.c b/arch/arm64/kvm/arch_timer.c
index 13ba691b848f..9dec8c419bf4 100644
--- a/arch/arm64/kvm/arch_timer.c
+++ b/arch/arm64/kvm/arch_timer.c
@@ -295,8 +295,7 @@ static u64 wfit_delay_ns(struct kvm_vcpu *vcpu)
 	u64 val = vcpu_get_reg(vcpu, kvm_vcpu_sys_get_rt(vcpu));
 	struct arch_timer_context *ctx;
 
-	ctx = (vcpu_has_nv(vcpu) && is_hyp_ctxt(vcpu)) ? vcpu_hvtimer(vcpu)
-						       : vcpu_vtimer(vcpu);
+	ctx = is_hyp_ctxt(vcpu) ? vcpu_hvtimer(vcpu) : vcpu_vtimer(vcpu);
 
 	return kvm_counter_compute_delta(ctx, val);
 }
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 4796104c4471..a25265aca432 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -221,7 +221,6 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = vgic_present;
 		break;
 	case KVM_CAP_IOEVENTFD:
-	case KVM_CAP_DEVICE_CTRL:
 	case KVM_CAP_USER_MEMORY:
 	case KVM_CAP_SYNC_MMU:
 	case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
@@ -669,6 +668,12 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
 			return ret;
 	}
 
+	if (vcpu_has_nv(vcpu)) {
+		ret = kvm_init_nv_sysregs(vcpu->kvm);
+		if (ret)
+			return ret;
+	}
+
 	ret = kvm_timer_enable(vcpu);
 	if (ret)
 		return ret;
@@ -1837,6 +1842,7 @@ static int kvm_init_vector_slots(void)
 static void __init cpu_prepare_hyp_mode(int cpu, u32 hyp_va_bits)
 {
 	struct kvm_nvhe_init_params *params = per_cpu_ptr_nvhe_sym(kvm_init_params, cpu);
+	u64 mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
 	unsigned long tcr;
 
 	/*
@@ -1859,6 +1865,10 @@ static void __init cpu_prepare_hyp_mode(int cpu, u32 hyp_va_bits)
 	}
 	tcr &= ~TCR_T0SZ_MASK;
 	tcr |= TCR_T0SZ(hyp_va_bits);
+	tcr &= ~TCR_EL2_PS_MASK;
+	tcr |= FIELD_PREP(TCR_EL2_PS_MASK, kvm_get_parange(mmfr0));
+	if (kvm_lpa2_is_enabled())
+		tcr |= TCR_EL2_DS;
 	params->tcr_el2 = tcr;
 
 	params->pgd_pa = kvm_mmu_get_httbr();
diff --git a/arch/arm64/kvm/emulate-nested.c b/arch/arm64/kvm/emulate-nested.c
index 06185216a297..431fd429932d 100644
--- a/arch/arm64/kvm/emulate-nested.c
+++ b/arch/arm64/kvm/emulate-nested.c
@@ -1012,6 +1012,7 @@ enum fgt_group_id {
 	HDFGRTR_GROUP,
 	HDFGWTR_GROUP,
 	HFGITR_GROUP,
+	HAFGRTR_GROUP,
 
 	/* Must be last */
 	__NR_FGT_GROUP_IDS__
@@ -1042,10 +1043,20 @@ enum fg_filter_id {
 
 static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	/* HFGRTR_EL2, HFGWTR_EL2 */
+	SR_FGT(SYS_AMAIR2_EL1,		HFGxTR, nAMAIR2_EL1, 0),
+	SR_FGT(SYS_MAIR2_EL1,		HFGxTR, nMAIR2_EL1, 0),
+	SR_FGT(SYS_S2POR_EL1,		HFGxTR, nS2POR_EL1, 0),
+	SR_FGT(SYS_POR_EL1,		HFGxTR, nPOR_EL1, 0),
+	SR_FGT(SYS_POR_EL0,		HFGxTR, nPOR_EL0, 0),
 	SR_FGT(SYS_PIR_EL1,		HFGxTR, nPIR_EL1, 0),
 	SR_FGT(SYS_PIRE0_EL1,		HFGxTR, nPIRE0_EL1, 0),
+	SR_FGT(SYS_RCWMASK_EL1,		HFGxTR, nRCWMASK_EL1, 0),
 	SR_FGT(SYS_TPIDR2_EL0,		HFGxTR, nTPIDR2_EL0, 0),
 	SR_FGT(SYS_SMPRI_EL1,		HFGxTR, nSMPRI_EL1, 0),
+	SR_FGT(SYS_GCSCR_EL1,		HFGxTR, nGCS_EL1, 0),
+	SR_FGT(SYS_GCSPR_EL1,		HFGxTR, nGCS_EL1, 0),
+	SR_FGT(SYS_GCSCRE0_EL1,		HFGxTR, nGCS_EL0, 0),
+	SR_FGT(SYS_GCSPR_EL0,		HFGxTR, nGCS_EL0, 0),
 	SR_FGT(SYS_ACCDATA_EL1,		HFGxTR, nACCDATA_EL1, 0),
 	SR_FGT(SYS_ERXADDR_EL1,		HFGxTR, ERXADDR_EL1, 1),
 	SR_FGT(SYS_ERXPFGCDN_EL1,	HFGxTR, ERXPFGCDN_EL1, 1),
@@ -1107,6 +1118,11 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	SR_FGT(SYS_AFSR1_EL1, 		HFGxTR, AFSR1_EL1, 1),
 	SR_FGT(SYS_AFSR0_EL1, 		HFGxTR, AFSR0_EL1, 1),
 	/* HFGITR_EL2 */
+	SR_FGT(OP_AT_S1E1A, 		HFGITR, ATS1E1A, 1),
+	SR_FGT(OP_COSP_RCTX, 		HFGITR, COSPRCTX, 1),
+	SR_FGT(OP_GCSPUSHX, 		HFGITR, nGCSEPP, 0),
+	SR_FGT(OP_GCSPOPX, 		HFGITR, nGCSEPP, 0),
+	SR_FGT(OP_GCSPUSHM, 		HFGITR, nGCSPUSHM_EL1, 0),
 	SR_FGT(OP_BRB_IALL, 		HFGITR, nBRBIALL, 0),
 	SR_FGT(OP_BRB_INJ, 		HFGITR, nBRBINJ, 0),
 	SR_FGT(SYS_DC_CVAC, 		HFGITR, DCCVAC, 1),
@@ -1674,6 +1690,49 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	SR_FGT(SYS_PMCR_EL0,		HDFGWTR, PMCR_EL0, 1),
 	SR_FGT(SYS_PMSWINC_EL0,		HDFGWTR, PMSWINC_EL0, 1),
 	SR_FGT(SYS_OSLAR_EL1,		HDFGWTR, OSLAR_EL1, 1),
+	/*
+	 * HAFGRTR_EL2
+	 */
+	SR_FGT(SYS_AMEVTYPER1_EL0(15),	HAFGRTR, AMEVTYPER115_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(14),	HAFGRTR, AMEVTYPER114_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(13),	HAFGRTR, AMEVTYPER113_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(12),	HAFGRTR, AMEVTYPER112_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(11),	HAFGRTR, AMEVTYPER111_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(10),	HAFGRTR, AMEVTYPER110_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(9),	HAFGRTR, AMEVTYPER19_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(8),	HAFGRTR, AMEVTYPER18_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(7),	HAFGRTR, AMEVTYPER17_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(6),	HAFGRTR, AMEVTYPER16_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(5),	HAFGRTR, AMEVTYPER15_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(4),	HAFGRTR, AMEVTYPER14_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(3),	HAFGRTR, AMEVTYPER13_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(2),	HAFGRTR, AMEVTYPER12_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(1),	HAFGRTR, AMEVTYPER11_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(0),	HAFGRTR, AMEVTYPER10_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(15),	HAFGRTR, AMEVCNTR115_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(14),	HAFGRTR, AMEVCNTR114_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(13),	HAFGRTR, AMEVCNTR113_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(12),	HAFGRTR, AMEVCNTR112_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(11),	HAFGRTR, AMEVCNTR111_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(10),	HAFGRTR, AMEVCNTR110_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(9),	HAFGRTR, AMEVCNTR19_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(8),	HAFGRTR, AMEVCNTR18_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(7),	HAFGRTR, AMEVCNTR17_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(6),	HAFGRTR, AMEVCNTR16_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(5),	HAFGRTR, AMEVCNTR15_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(4),	HAFGRTR, AMEVCNTR14_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(3),	HAFGRTR, AMEVCNTR13_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(2),	HAFGRTR, AMEVCNTR12_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(1),	HAFGRTR, AMEVCNTR11_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(0),	HAFGRTR, AMEVCNTR10_EL0, 1),
+	SR_FGT(SYS_AMCNTENCLR1_EL0,	HAFGRTR, AMCNTEN1, 1),
+	SR_FGT(SYS_AMCNTENSET1_EL0,	HAFGRTR, AMCNTEN1, 1),
+	SR_FGT(SYS_AMCNTENCLR0_EL0,	HAFGRTR, AMCNTEN0, 1),
+	SR_FGT(SYS_AMCNTENSET0_EL0,	HAFGRTR, AMCNTEN0, 1),
+	SR_FGT(SYS_AMEVCNTR0_EL0(3),	HAFGRTR, AMEVCNTR03_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR0_EL0(2),	HAFGRTR, AMEVCNTR02_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR0_EL0(1),	HAFGRTR, AMEVCNTR01_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR0_EL0(0),	HAFGRTR, AMEVCNTR00_EL0, 1),
 };
 
 static union trap_config get_trap_config(u32 sysreg)
@@ -1894,6 +1953,10 @@ bool __check_nv_sr_forward(struct kvm_vcpu *vcpu)
 			val = sanitised_sys_reg(vcpu, HDFGWTR_EL2);
 		break;
 
+	case HAFGRTR_GROUP:
+		val = sanitised_sys_reg(vcpu, HAFGRTR_EL2);
+		break;
+
 	case HFGITR_GROUP:
 		val = sanitised_sys_reg(vcpu, HFGITR_EL2);
 		switch (tc.fgf) {
diff --git a/arch/arm64/kvm/hyp/include/hyp/fault.h b/arch/arm64/kvm/hyp/include/hyp/fault.h
index 9ddcfe2c3e57..9e13c1bc2ad5 100644
--- a/arch/arm64/kvm/hyp/include/hyp/fault.h
+++ b/arch/arm64/kvm/hyp/include/hyp/fault.h
@@ -60,7 +60,7 @@ static inline bool __get_fault_info(u64 esr, struct kvm_vcpu_fault_info *fault)
 	 */
 	if (!(esr & ESR_ELx_S1PTW) &&
 	    (cpus_have_final_cap(ARM64_WORKAROUND_834220) ||
-	     (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_PERM)) {
+	     esr_fsc_is_permission_fault(esr))) {
 		if (!__translate_far_to_hpfar(far, &hpfar))
 			return false;
 	} else {
diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h
index f99d8af0b9af..a038320cdb08 100644
--- a/arch/arm64/kvm/hyp/include/hyp/switch.h
+++ b/arch/arm64/kvm/hyp/include/hyp/switch.h
@@ -79,6 +79,45 @@ static inline void __activate_traps_fpsimd32(struct kvm_vcpu *vcpu)
 		clr |= ~hfg & __ ## reg ## _nMASK; 			\
 	} while(0)
 
+#define update_fgt_traps_cs(vcpu, reg, clr, set)			\
+	do {								\
+		struct kvm_cpu_context *hctxt =				\
+			&this_cpu_ptr(&kvm_host_data)->host_ctxt;	\
+		u64 c = 0, s = 0;					\
+									\
+		ctxt_sys_reg(hctxt, reg) = read_sysreg_s(SYS_ ## reg);	\
+		compute_clr_set(vcpu, reg, c, s);			\
+		s |= set;						\
+		c |= clr;						\
+		if (c || s) {						\
+			u64 val = __ ## reg ## _nMASK;			\
+			val |= s;					\
+			val &= ~c;					\
+			write_sysreg_s(val, SYS_ ## reg);		\
+		}							\
+	} while(0)
+
+#define update_fgt_traps(vcpu, reg)		\
+	update_fgt_traps_cs(vcpu, reg, 0, 0)
+
+/*
+ * Validate the fine grain trap masks.
+ * Check that the masks do not overlap and that all bits are accounted for.
+ */
+#define CHECK_FGT_MASKS(reg)							\
+	do {									\
+		BUILD_BUG_ON((__ ## reg ## _MASK) & (__ ## reg ## _nMASK));	\
+		BUILD_BUG_ON(~((__ ## reg ## _RES0) ^ (__ ## reg ## _MASK) ^	\
+			       (__ ## reg ## _nMASK)));				\
+	} while(0)
+
+static inline bool cpu_has_amu(void)
+{
+       u64 pfr0 = read_sysreg_s(SYS_ID_AA64PFR0_EL1);
+
+       return cpuid_feature_extract_unsigned_field(pfr0,
+               ID_AA64PFR0_EL1_AMU_SHIFT);
+}
 
 static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 {
@@ -86,6 +125,14 @@ static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 	u64 r_clr = 0, w_clr = 0, r_set = 0, w_set = 0, tmp;
 	u64 r_val, w_val;
 
+	CHECK_FGT_MASKS(HFGRTR_EL2);
+	CHECK_FGT_MASKS(HFGWTR_EL2);
+	CHECK_FGT_MASKS(HFGITR_EL2);
+	CHECK_FGT_MASKS(HDFGRTR_EL2);
+	CHECK_FGT_MASKS(HDFGWTR_EL2);
+	CHECK_FGT_MASKS(HAFGRTR_EL2);
+	CHECK_FGT_MASKS(HCRX_EL2);
+
 	if (!cpus_have_final_cap(ARM64_HAS_FGT))
 		return;
 
@@ -110,12 +157,15 @@ static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 		compute_clr_set(vcpu, HFGWTR_EL2, w_clr, w_set);
 	}
 
-	/* The default is not to trap anything but ACCDATA_EL1 */
-	r_val = __HFGRTR_EL2_nMASK & ~HFGxTR_EL2_nACCDATA_EL1;
+	/* The default to trap everything not handled or supported in KVM. */
+	tmp = HFGxTR_EL2_nAMAIR2_EL1 | HFGxTR_EL2_nMAIR2_EL1 | HFGxTR_EL2_nS2POR_EL1 |
+	      HFGxTR_EL2_nPOR_EL1 | HFGxTR_EL2_nPOR_EL0 | HFGxTR_EL2_nACCDATA_EL1;
+
+	r_val = __HFGRTR_EL2_nMASK & ~tmp;
 	r_val |= r_set;
 	r_val &= ~r_clr;
 
-	w_val = __HFGWTR_EL2_nMASK & ~HFGxTR_EL2_nACCDATA_EL1;
+	w_val = __HFGWTR_EL2_nMASK & ~tmp;
 	w_val |= w_set;
 	w_val &= ~w_clr;
 
@@ -125,34 +175,12 @@ static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 	if (!vcpu_has_nv(vcpu) || is_hyp_ctxt(vcpu))
 		return;
 
-	ctxt_sys_reg(hctxt, HFGITR_EL2) = read_sysreg_s(SYS_HFGITR_EL2);
+	update_fgt_traps(vcpu, HFGITR_EL2);
+	update_fgt_traps(vcpu, HDFGRTR_EL2);
+	update_fgt_traps(vcpu, HDFGWTR_EL2);
 
-	r_set = r_clr = 0;
-	compute_clr_set(vcpu, HFGITR_EL2, r_clr, r_set);
-	r_val = __HFGITR_EL2_nMASK;
-	r_val |= r_set;
-	r_val &= ~r_clr;
-
-	write_sysreg_s(r_val, SYS_HFGITR_EL2);
-
-	ctxt_sys_reg(hctxt, HDFGRTR_EL2) = read_sysreg_s(SYS_HDFGRTR_EL2);
-	ctxt_sys_reg(hctxt, HDFGWTR_EL2) = read_sysreg_s(SYS_HDFGWTR_EL2);
-
-	r_clr = r_set = w_clr = w_set = 0;
-
-	compute_clr_set(vcpu, HDFGRTR_EL2, r_clr, r_set);
-	compute_clr_set(vcpu, HDFGWTR_EL2, w_clr, w_set);
-
-	r_val = __HDFGRTR_EL2_nMASK;
-	r_val |= r_set;
-	r_val &= ~r_clr;
-
-	w_val = __HDFGWTR_EL2_nMASK;
-	w_val |= w_set;
-	w_val &= ~w_clr;
-
-	write_sysreg_s(r_val, SYS_HDFGRTR_EL2);
-	write_sysreg_s(w_val, SYS_HDFGWTR_EL2);
+	if (cpu_has_amu())
+		update_fgt_traps(vcpu, HAFGRTR_EL2);
 }
 
 static inline void __deactivate_traps_hfgxtr(struct kvm_vcpu *vcpu)
@@ -171,6 +199,9 @@ static inline void __deactivate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 	write_sysreg_s(ctxt_sys_reg(hctxt, HFGITR_EL2), SYS_HFGITR_EL2);
 	write_sysreg_s(ctxt_sys_reg(hctxt, HDFGRTR_EL2), SYS_HDFGRTR_EL2);
 	write_sysreg_s(ctxt_sys_reg(hctxt, HDFGWTR_EL2), SYS_HDFGWTR_EL2);
+
+	if (cpu_has_amu())
+		write_sysreg_s(ctxt_sys_reg(hctxt, HAFGRTR_EL2), SYS_HAFGRTR_EL2);
 }
 
 static inline void __activate_traps_common(struct kvm_vcpu *vcpu)
@@ -591,7 +622,7 @@ static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
 	if (static_branch_unlikely(&vgic_v2_cpuif_trap)) {
 		bool valid;
 
-		valid = kvm_vcpu_trap_get_fault_type(vcpu) == ESR_ELx_FSC_FAULT &&
+		valid = kvm_vcpu_trap_is_translation_fault(vcpu) &&
 			kvm_vcpu_dabt_isvalid(vcpu) &&
 			!kvm_vcpu_abt_issea(vcpu) &&
 			!kvm_vcpu_abt_iss1tw(vcpu);
diff --git a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
index e91922daa8ca..51f043649146 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
@@ -69,6 +69,8 @@
 	ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_SSBS) \
 	)
 
+#define PVM_ID_AA64PFR2_ALLOW 0ULL
+
 /*
  * Allow for protected VMs:
  * - Mixed-endian
@@ -101,6 +103,7 @@
  * - Privileged Access Never
  * - SError interrupt exceptions from speculative reads
  * - Enhanced Translation Synchronization
+ * - Control for cache maintenance permission
  */
 #define PVM_ID_AA64MMFR1_ALLOW (\
 	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_HAFDBS) | \
@@ -108,7 +111,8 @@
 	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_HPDS) | \
 	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_PAN) | \
 	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_SpecSEI) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_ETS) \
+	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_ETS) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_CMOW) \
 	)
 
 /*
@@ -133,6 +137,8 @@
 	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_E0PD) \
 	)
 
+#define PVM_ID_AA64MMFR3_ALLOW (0ULL)
+
 /*
  * No support for Scalable Vectors for protected VMs:
  *	Requires additional support from KVM, e.g., context-switching and
@@ -178,10 +184,18 @@
 	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_RNDR) \
 	)
 
+/* Restrict pointer authentication to the basic version. */
+#define PVM_ID_AA64ISAR1_RESTRICT_UNSIGNED (\
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA), ID_AA64ISAR1_EL1_APA_PAuth) | \
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API), ID_AA64ISAR1_EL1_API_PAuth) \
+	)
+
+#define PVM_ID_AA64ISAR2_RESTRICT_UNSIGNED (\
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3), ID_AA64ISAR2_EL1_APA3_PAuth) \
+	)
+
 #define PVM_ID_AA64ISAR1_ALLOW (\
 	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_DPB) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API) | \
 	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_JSCVT) | \
 	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_FCMA) | \
 	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_LRCPC) | \
@@ -196,8 +210,8 @@
 	)
 
 #define PVM_ID_AA64ISAR2_ALLOW (\
+	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_ATS1A)| \
 	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) | \
 	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_MOPS) \
 	)
 
diff --git a/arch/arm64/kvm/hyp/include/nvhe/gfp.h b/arch/arm64/kvm/hyp/include/nvhe/gfp.h
index fe5472a184a3..97c527ef53c2 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/gfp.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/gfp.h
@@ -16,7 +16,7 @@ struct hyp_pool {
 	 * API at EL2.
 	 */
 	hyp_spinlock_t lock;
-	struct list_head free_area[MAX_ORDER + 1];
+	struct list_head free_area[NR_PAGE_ORDERS];
 	phys_addr_t range_start;
 	phys_addr_t range_end;
 	unsigned short max_order;
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-init.S b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
index 1cc06e6797bd..2994878d68ea 100644
--- a/arch/arm64/kvm/hyp/nvhe/hyp-init.S
+++ b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
@@ -122,11 +122,7 @@ alternative_if ARM64_HAS_CNP
 alternative_else_nop_endif
 	msr	ttbr0_el2, x2
 
-	/*
-	 * Set the PS bits in TCR_EL2.
-	 */
 	ldr	x0, [x0, #NVHE_INIT_TCR_EL2]
-	tcr_compute_pa_size x0, #TCR_EL2_PS_SHIFT, x1, x2
 	msr	tcr_el2, x0
 
 	isb
@@ -292,6 +288,8 @@ alternative_else_nop_endif
 	mov	sp, x0
 
 	/* And turn the MMU back on! */
+	dsb	nsh
+	isb
 	set_sctlr_el2	x2
 	ret	x1
 SYM_FUNC_END(__pkvm_init_switch_pgd)
diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
index 8d0a5834e883..861c76021a25 100644
--- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c
+++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
@@ -91,7 +91,7 @@ static void host_s2_put_page(void *addr)
 	hyp_put_page(&host_s2_pool, addr);
 }
 
-static void host_s2_free_unlinked_table(void *addr, u32 level)
+static void host_s2_free_unlinked_table(void *addr, s8 level)
 {
 	kvm_pgtable_stage2_free_unlinked(&host_mmu.mm_ops, addr, level);
 }
@@ -443,7 +443,7 @@ static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range)
 {
 	struct kvm_mem_range cur;
 	kvm_pte_t pte;
-	u32 level;
+	s8 level;
 	int ret;
 
 	hyp_assert_lock_held(&host_mmu.lock);
@@ -462,7 +462,7 @@ static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range)
 		cur.start = ALIGN_DOWN(addr, granule);
 		cur.end = cur.start + granule;
 		level++;
-	} while ((level < KVM_PGTABLE_MAX_LEVELS) &&
+	} while ((level <= KVM_PGTABLE_LAST_LEVEL) &&
 			!(kvm_level_supports_block_mapping(level) &&
 			  range_included(&cur, range)));
 
diff --git a/arch/arm64/kvm/hyp/nvhe/mm.c b/arch/arm64/kvm/hyp/nvhe/mm.c
index 65a7a186d7b2..b01a3d1078a8 100644
--- a/arch/arm64/kvm/hyp/nvhe/mm.c
+++ b/arch/arm64/kvm/hyp/nvhe/mm.c
@@ -260,7 +260,7 @@ static void fixmap_clear_slot(struct hyp_fixmap_slot *slot)
 	 * https://lore.kernel.org/kvm/20221017115209.2099-1-will@kernel.org/T/#mf10dfbaf1eaef9274c581b81c53758918c1d0f03
 	 */
 	dsb(ishst);
-	__tlbi_level(vale2is, __TLBI_VADDR(addr, 0), (KVM_PGTABLE_MAX_LEVELS - 1));
+	__tlbi_level(vale2is, __TLBI_VADDR(addr, 0), KVM_PGTABLE_LAST_LEVEL);
 	dsb(ish);
 	isb();
 }
@@ -275,7 +275,7 @@ static int __create_fixmap_slot_cb(const struct kvm_pgtable_visit_ctx *ctx,
 {
 	struct hyp_fixmap_slot *slot = per_cpu_ptr(&fixmap_slots, (u64)ctx->arg);
 
-	if (!kvm_pte_valid(ctx->old) || ctx->level != KVM_PGTABLE_MAX_LEVELS - 1)
+	if (!kvm_pte_valid(ctx->old) || ctx->level != KVM_PGTABLE_LAST_LEVEL)
 		return -EINVAL;
 
 	slot->addr = ctx->addr;
diff --git a/arch/arm64/kvm/hyp/nvhe/page_alloc.c b/arch/arm64/kvm/hyp/nvhe/page_alloc.c
index b1e392186a0f..e691290d3765 100644
--- a/arch/arm64/kvm/hyp/nvhe/page_alloc.c
+++ b/arch/arm64/kvm/hyp/nvhe/page_alloc.c
@@ -228,7 +228,8 @@ int hyp_pool_init(struct hyp_pool *pool, u64 pfn, unsigned int nr_pages,
 	int i;
 
 	hyp_spin_lock_init(&pool->lock);
-	pool->max_order = min(MAX_ORDER, get_order(nr_pages << PAGE_SHIFT));
+	pool->max_order = min(MAX_PAGE_ORDER,
+			      get_order(nr_pages << PAGE_SHIFT));
 	for (i = 0; i <= pool->max_order; i++)
 		INIT_LIST_HEAD(&pool->free_area[i]);
 	pool->range_start = phys;
diff --git a/arch/arm64/kvm/hyp/nvhe/pkvm.c b/arch/arm64/kvm/hyp/nvhe/pkvm.c
index 9d23a51d7f75..26dd9a20ad6e 100644
--- a/arch/arm64/kvm/hyp/nvhe/pkvm.c
+++ b/arch/arm64/kvm/hyp/nvhe/pkvm.c
@@ -12,7 +12,7 @@
 #include <nvhe/pkvm.h>
 #include <nvhe/trap_handler.h>
 
-/* Used by icache_is_vpipt(). */
+/* Used by icache_is_aliasing(). */
 unsigned long __icache_flags;
 
 /* Used by kvm_get_vttbr(). */
@@ -136,6 +136,10 @@ static void pvm_init_traps_aa64dfr0(struct kvm_vcpu *vcpu)
 			cptr_set |= CPTR_EL2_TTA;
 	}
 
+	/* Trap External Trace */
+	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_ExtTrcBuff), feature_ids))
+		mdcr_clear |= MDCR_EL2_E2TB_MASK << MDCR_EL2_E2TB_SHIFT;
+
 	vcpu->arch.mdcr_el2 |= mdcr_set;
 	vcpu->arch.mdcr_el2 &= ~mdcr_clear;
 	vcpu->arch.cptr_el2 |= cptr_set;
diff --git a/arch/arm64/kvm/hyp/nvhe/setup.c b/arch/arm64/kvm/hyp/nvhe/setup.c
index 0d5e0a89ddce..bc58d1b515af 100644
--- a/arch/arm64/kvm/hyp/nvhe/setup.c
+++ b/arch/arm64/kvm/hyp/nvhe/setup.c
@@ -181,7 +181,7 @@ static int fix_host_ownership_walker(const struct kvm_pgtable_visit_ctx *ctx,
 	if (!kvm_pte_valid(ctx->old))
 		return 0;
 
-	if (ctx->level != (KVM_PGTABLE_MAX_LEVELS - 1))
+	if (ctx->level != KVM_PGTABLE_LAST_LEVEL)
 		return -EINVAL;
 
 	phys = kvm_pte_to_phys(ctx->old);
diff --git a/arch/arm64/kvm/hyp/nvhe/tlb.c b/arch/arm64/kvm/hyp/nvhe/tlb.c
index 1b265713d6be..a60fb13e2192 100644
--- a/arch/arm64/kvm/hyp/nvhe/tlb.c
+++ b/arch/arm64/kvm/hyp/nvhe/tlb.c
@@ -105,28 +105,6 @@ void __kvm_tlb_flush_vmid_ipa(struct kvm_s2_mmu *mmu,
 	dsb(ish);
 	isb();
 
-	/*
-	 * If the host is running at EL1 and we have a VPIPT I-cache,
-	 * then we must perform I-cache maintenance at EL2 in order for
-	 * it to have an effect on the guest. Since the guest cannot hit
-	 * I-cache lines allocated with a different VMID, we don't need
-	 * to worry about junk out of guest reset (we nuke the I-cache on
-	 * VMID rollover), but we do need to be careful when remapping
-	 * executable pages for the same guest. This can happen when KSM
-	 * takes a CoW fault on an executable page, copies the page into
-	 * a page that was previously mapped in the guest and then needs
-	 * to invalidate the guest view of the I-cache for that page
-	 * from EL1. To solve this, we invalidate the entire I-cache when
-	 * unmapping a page from a guest if we have a VPIPT I-cache but
-	 * the host is running at EL1. As above, we could do better if
-	 * we had the VA.
-	 *
-	 * The moral of this story is: if you have a VPIPT I-cache, then
-	 * you should be running with VHE enabled.
-	 */
-	if (icache_is_vpipt())
-		icache_inval_all_pou();
-
 	__tlb_switch_to_host(&cxt);
 }
 
@@ -157,28 +135,6 @@ void __kvm_tlb_flush_vmid_ipa_nsh(struct kvm_s2_mmu *mmu,
 	dsb(nsh);
 	isb();
 
-	/*
-	 * If the host is running at EL1 and we have a VPIPT I-cache,
-	 * then we must perform I-cache maintenance at EL2 in order for
-	 * it to have an effect on the guest. Since the guest cannot hit
-	 * I-cache lines allocated with a different VMID, we don't need
-	 * to worry about junk out of guest reset (we nuke the I-cache on
-	 * VMID rollover), but we do need to be careful when remapping
-	 * executable pages for the same guest. This can happen when KSM
-	 * takes a CoW fault on an executable page, copies the page into
-	 * a page that was previously mapped in the guest and then needs
-	 * to invalidate the guest view of the I-cache for that page
-	 * from EL1. To solve this, we invalidate the entire I-cache when
-	 * unmapping a page from a guest if we have a VPIPT I-cache but
-	 * the host is running at EL1. As above, we could do better if
-	 * we had the VA.
-	 *
-	 * The moral of this story is: if you have a VPIPT I-cache, then
-	 * you should be running with VHE enabled.
-	 */
-	if (icache_is_vpipt())
-		icache_inval_all_pou();
-
 	__tlb_switch_to_host(&cxt);
 }
 
@@ -205,10 +161,6 @@ void __kvm_tlb_flush_vmid_range(struct kvm_s2_mmu *mmu,
 	dsb(ish);
 	isb();
 
-	/* See the comment in __kvm_tlb_flush_vmid_ipa() */
-	if (icache_is_vpipt())
-		icache_inval_all_pou();
-
 	__tlb_switch_to_host(&cxt);
 }
 
@@ -246,18 +198,5 @@ void __kvm_flush_vm_context(void)
 	/* Same remark as in __tlb_switch_to_guest() */
 	dsb(ish);
 	__tlbi(alle1is);
-
-	/*
-	 * VIPT and PIPT caches are not affected by VMID, so no maintenance
-	 * is necessary across a VMID rollover.
-	 *
-	 * VPIPT caches constrain lookup and maintenance to the active VMID,
-	 * so we need to invalidate lines with a stale VMID to avoid an ABA
-	 * race after multiple rollovers.
-	 *
-	 */
-	if (icache_is_vpipt())
-		asm volatile("ic ialluis");
-
 	dsb(ish);
 }
diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c
index 1966fdee740e..ab9d05fcf98b 100644
--- a/arch/arm64/kvm/hyp/pgtable.c
+++ b/arch/arm64/kvm/hyp/pgtable.c
@@ -79,7 +79,10 @@ static bool kvm_pgtable_walk_skip_cmo(const struct kvm_pgtable_visit_ctx *ctx)
 
 static bool kvm_phys_is_valid(u64 phys)
 {
-	return phys < BIT(id_aa64mmfr0_parange_to_phys_shift(ID_AA64MMFR0_EL1_PARANGE_MAX));
+	u64 parange_max = kvm_get_parange_max();
+	u8 shift = id_aa64mmfr0_parange_to_phys_shift(parange_max);
+
+	return phys < BIT(shift);
 }
 
 static bool kvm_block_mapping_supported(const struct kvm_pgtable_visit_ctx *ctx, u64 phys)
@@ -98,7 +101,7 @@ static bool kvm_block_mapping_supported(const struct kvm_pgtable_visit_ctx *ctx,
 	return IS_ALIGNED(ctx->addr, granule);
 }
 
-static u32 kvm_pgtable_idx(struct kvm_pgtable_walk_data *data, u32 level)
+static u32 kvm_pgtable_idx(struct kvm_pgtable_walk_data *data, s8 level)
 {
 	u64 shift = kvm_granule_shift(level);
 	u64 mask = BIT(PAGE_SHIFT - 3) - 1;
@@ -114,7 +117,7 @@ static u32 kvm_pgd_page_idx(struct kvm_pgtable *pgt, u64 addr)
 	return (addr & mask) >> shift;
 }
 
-static u32 kvm_pgd_pages(u32 ia_bits, u32 start_level)
+static u32 kvm_pgd_pages(u32 ia_bits, s8 start_level)
 {
 	struct kvm_pgtable pgt = {
 		.ia_bits	= ia_bits,
@@ -124,9 +127,9 @@ static u32 kvm_pgd_pages(u32 ia_bits, u32 start_level)
 	return kvm_pgd_page_idx(&pgt, -1ULL) + 1;
 }
 
-static bool kvm_pte_table(kvm_pte_t pte, u32 level)
+static bool kvm_pte_table(kvm_pte_t pte, s8 level)
 {
-	if (level == KVM_PGTABLE_MAX_LEVELS - 1)
+	if (level == KVM_PGTABLE_LAST_LEVEL)
 		return false;
 
 	if (!kvm_pte_valid(pte))
@@ -154,11 +157,11 @@ static kvm_pte_t kvm_init_table_pte(kvm_pte_t *childp, struct kvm_pgtable_mm_ops
 	return pte;
 }
 
-static kvm_pte_t kvm_init_valid_leaf_pte(u64 pa, kvm_pte_t attr, u32 level)
+static kvm_pte_t kvm_init_valid_leaf_pte(u64 pa, kvm_pte_t attr, s8 level)
 {
 	kvm_pte_t pte = kvm_phys_to_pte(pa);
-	u64 type = (level == KVM_PGTABLE_MAX_LEVELS - 1) ? KVM_PTE_TYPE_PAGE :
-							   KVM_PTE_TYPE_BLOCK;
+	u64 type = (level == KVM_PGTABLE_LAST_LEVEL) ? KVM_PTE_TYPE_PAGE :
+						       KVM_PTE_TYPE_BLOCK;
 
 	pte |= attr & (KVM_PTE_LEAF_ATTR_LO | KVM_PTE_LEAF_ATTR_HI);
 	pte |= FIELD_PREP(KVM_PTE_TYPE, type);
@@ -203,11 +206,11 @@ static bool kvm_pgtable_walk_continue(const struct kvm_pgtable_walker *walker,
 }
 
 static int __kvm_pgtable_walk(struct kvm_pgtable_walk_data *data,
-			      struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, u32 level);
+			      struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, s8 level);
 
 static inline int __kvm_pgtable_visit(struct kvm_pgtable_walk_data *data,
 				      struct kvm_pgtable_mm_ops *mm_ops,
-				      kvm_pteref_t pteref, u32 level)
+				      kvm_pteref_t pteref, s8 level)
 {
 	enum kvm_pgtable_walk_flags flags = data->walker->flags;
 	kvm_pte_t *ptep = kvm_dereference_pteref(data->walker, pteref);
@@ -272,12 +275,13 @@ out:
 }
 
 static int __kvm_pgtable_walk(struct kvm_pgtable_walk_data *data,
-			      struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, u32 level)
+			      struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, s8 level)
 {
 	u32 idx;
 	int ret = 0;
 
-	if (WARN_ON_ONCE(level >= KVM_PGTABLE_MAX_LEVELS))
+	if (WARN_ON_ONCE(level < KVM_PGTABLE_FIRST_LEVEL ||
+			 level > KVM_PGTABLE_LAST_LEVEL))
 		return -EINVAL;
 
 	for (idx = kvm_pgtable_idx(data, level); idx < PTRS_PER_PTE; ++idx) {
@@ -340,7 +344,7 @@ int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size,
 
 struct leaf_walk_data {
 	kvm_pte_t	pte;
-	u32		level;
+	s8		level;
 };
 
 static int leaf_walker(const struct kvm_pgtable_visit_ctx *ctx,
@@ -355,7 +359,7 @@ static int leaf_walker(const struct kvm_pgtable_visit_ctx *ctx,
 }
 
 int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr,
-			 kvm_pte_t *ptep, u32 *level)
+			 kvm_pte_t *ptep, s8 *level)
 {
 	struct leaf_walk_data data;
 	struct kvm_pgtable_walker walker = {
@@ -408,7 +412,8 @@ static int hyp_set_prot_attr(enum kvm_pgtable_prot prot, kvm_pte_t *ptep)
 	}
 
 	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_AP, ap);
-	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_SH, sh);
+	if (!kvm_lpa2_is_enabled())
+		attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_SH, sh);
 	attr |= KVM_PTE_LEAF_ATTR_LO_S1_AF;
 	attr |= prot & KVM_PTE_LEAF_ATTR_HI_SW;
 	*ptep = attr;
@@ -467,7 +472,7 @@ static int hyp_map_walker(const struct kvm_pgtable_visit_ctx *ctx,
 	if (hyp_map_walker_try_leaf(ctx, data))
 		return 0;
 
-	if (WARN_ON(ctx->level == KVM_PGTABLE_MAX_LEVELS - 1))
+	if (WARN_ON(ctx->level == KVM_PGTABLE_LAST_LEVEL))
 		return -EINVAL;
 
 	childp = (kvm_pte_t *)mm_ops->zalloc_page(NULL);
@@ -563,14 +568,19 @@ u64 kvm_pgtable_hyp_unmap(struct kvm_pgtable *pgt, u64 addr, u64 size)
 int kvm_pgtable_hyp_init(struct kvm_pgtable *pgt, u32 va_bits,
 			 struct kvm_pgtable_mm_ops *mm_ops)
 {
-	u64 levels = ARM64_HW_PGTABLE_LEVELS(va_bits);
+	s8 start_level = KVM_PGTABLE_LAST_LEVEL + 1 -
+			 ARM64_HW_PGTABLE_LEVELS(va_bits);
+
+	if (start_level < KVM_PGTABLE_FIRST_LEVEL ||
+	    start_level > KVM_PGTABLE_LAST_LEVEL)
+		return -EINVAL;
 
 	pgt->pgd = (kvm_pteref_t)mm_ops->zalloc_page(NULL);
 	if (!pgt->pgd)
 		return -ENOMEM;
 
 	pgt->ia_bits		= va_bits;
-	pgt->start_level	= KVM_PGTABLE_MAX_LEVELS - levels;
+	pgt->start_level	= start_level;
 	pgt->mm_ops		= mm_ops;
 	pgt->mmu		= NULL;
 	pgt->force_pte_cb	= NULL;
@@ -624,7 +634,7 @@ struct stage2_map_data {
 u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
 {
 	u64 vtcr = VTCR_EL2_FLAGS;
-	u8 lvls;
+	s8 lvls;
 
 	vtcr |= kvm_get_parange(mmfr0) << VTCR_EL2_PS_SHIFT;
 	vtcr |= VTCR_EL2_T0SZ(phys_shift);
@@ -635,6 +645,15 @@ u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
 	lvls = stage2_pgtable_levels(phys_shift);
 	if (lvls < 2)
 		lvls = 2;
+
+	/*
+	 * When LPA2 is enabled, the HW supports an extra level of translation
+	 * (for 5 in total) when using 4K pages. It also introduces VTCR_EL2.SL2
+	 * to as an addition to SL0 to enable encoding this extra start level.
+	 * However, since we always use concatenated pages for the first level
+	 * lookup, we will never need this extra level and therefore do not need
+	 * to touch SL2.
+	 */
 	vtcr |= VTCR_EL2_LVLS_TO_SL0(lvls);
 
 #ifdef CONFIG_ARM64_HW_AFDBM
@@ -654,6 +673,9 @@ u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
 		vtcr |= VTCR_EL2_HA;
 #endif /* CONFIG_ARM64_HW_AFDBM */
 
+	if (kvm_lpa2_is_enabled())
+		vtcr |= VTCR_EL2_DS;
+
 	/* Set the vmid bits */
 	vtcr |= (get_vmid_bits(mmfr1) == 16) ?
 		VTCR_EL2_VS_16BIT :
@@ -711,7 +733,9 @@ static int stage2_set_prot_attr(struct kvm_pgtable *pgt, enum kvm_pgtable_prot p
 	if (prot & KVM_PGTABLE_PROT_W)
 		attr |= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W;
 
-	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S2_SH, sh);
+	if (!kvm_lpa2_is_enabled())
+		attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S2_SH, sh);
+
 	attr |= KVM_PTE_LEAF_ATTR_LO_S2_AF;
 	attr |= prot & KVM_PTE_LEAF_ATTR_HI_SW;
 	*ptep = attr;
@@ -902,7 +926,7 @@ static bool stage2_leaf_mapping_allowed(const struct kvm_pgtable_visit_ctx *ctx,
 {
 	u64 phys = stage2_map_walker_phys_addr(ctx, data);
 
-	if (data->force_pte && (ctx->level < (KVM_PGTABLE_MAX_LEVELS - 1)))
+	if (data->force_pte && ctx->level < KVM_PGTABLE_LAST_LEVEL)
 		return false;
 
 	return kvm_block_mapping_supported(ctx, phys);
@@ -981,7 +1005,7 @@ static int stage2_map_walk_leaf(const struct kvm_pgtable_visit_ctx *ctx,
 	if (ret != -E2BIG)
 		return ret;
 
-	if (WARN_ON(ctx->level == KVM_PGTABLE_MAX_LEVELS - 1))
+	if (WARN_ON(ctx->level == KVM_PGTABLE_LAST_LEVEL))
 		return -EINVAL;
 
 	if (!data->memcache)
@@ -1151,7 +1175,7 @@ struct stage2_attr_data {
 	kvm_pte_t			attr_set;
 	kvm_pte_t			attr_clr;
 	kvm_pte_t			pte;
-	u32				level;
+	s8				level;
 };
 
 static int stage2_attr_walker(const struct kvm_pgtable_visit_ctx *ctx,
@@ -1194,7 +1218,7 @@ static int stage2_attr_walker(const struct kvm_pgtable_visit_ctx *ctx,
 static int stage2_update_leaf_attrs(struct kvm_pgtable *pgt, u64 addr,
 				    u64 size, kvm_pte_t attr_set,
 				    kvm_pte_t attr_clr, kvm_pte_t *orig_pte,
-				    u32 *level, enum kvm_pgtable_walk_flags flags)
+				    s8 *level, enum kvm_pgtable_walk_flags flags)
 {
 	int ret;
 	kvm_pte_t attr_mask = KVM_PTE_LEAF_ATTR_LO | KVM_PTE_LEAF_ATTR_HI;
@@ -1296,7 +1320,7 @@ int kvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr,
 				   enum kvm_pgtable_prot prot)
 {
 	int ret;
-	u32 level;
+	s8 level;
 	kvm_pte_t set = 0, clr = 0;
 
 	if (prot & KVM_PTE_LEAF_ATTR_HI_SW)
@@ -1349,7 +1373,7 @@ int kvm_pgtable_stage2_flush(struct kvm_pgtable *pgt, u64 addr, u64 size)
 }
 
 kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
-					      u64 phys, u32 level,
+					      u64 phys, s8 level,
 					      enum kvm_pgtable_prot prot,
 					      void *mc, bool force_pte)
 {
@@ -1395,7 +1419,6 @@ kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
 				 level + 1);
 	if (ret) {
 		kvm_pgtable_stage2_free_unlinked(mm_ops, pgtable, level);
-		mm_ops->put_page(pgtable);
 		return ERR_PTR(ret);
 	}
 
@@ -1407,7 +1430,7 @@ kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
  * fully populated tree up to the PTE entries. Note that @level is
  * interpreted as in "level @level entry".
  */
-static int stage2_block_get_nr_page_tables(u32 level)
+static int stage2_block_get_nr_page_tables(s8 level)
 {
 	switch (level) {
 	case 1:
@@ -1418,7 +1441,7 @@ static int stage2_block_get_nr_page_tables(u32 level)
 		return 0;
 	default:
 		WARN_ON_ONCE(level < KVM_PGTABLE_MIN_BLOCK_LEVEL ||
-			     level >= KVM_PGTABLE_MAX_LEVELS);
+			     level > KVM_PGTABLE_LAST_LEVEL);
 		return -EINVAL;
 	};
 }
@@ -1431,13 +1454,13 @@ static int stage2_split_walker(const struct kvm_pgtable_visit_ctx *ctx,
 	struct kvm_s2_mmu *mmu;
 	kvm_pte_t pte = ctx->old, new, *childp;
 	enum kvm_pgtable_prot prot;
-	u32 level = ctx->level;
+	s8 level = ctx->level;
 	bool force_pte;
 	int nr_pages;
 	u64 phys;
 
 	/* No huge-pages exist at the last level */
-	if (level == KVM_PGTABLE_MAX_LEVELS - 1)
+	if (level == KVM_PGTABLE_LAST_LEVEL)
 		return 0;
 
 	/* We only split valid block mappings */
@@ -1478,7 +1501,6 @@ static int stage2_split_walker(const struct kvm_pgtable_visit_ctx *ctx,
 
 	if (!stage2_try_break_pte(ctx, mmu)) {
 		kvm_pgtable_stage2_free_unlinked(mm_ops, childp, level);
-		mm_ops->put_page(childp);
 		return -EAGAIN;
 	}
 
@@ -1514,7 +1536,7 @@ int __kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_s2_mmu *mmu,
 	u64 vtcr = mmu->vtcr;
 	u32 ia_bits = VTCR_EL2_IPA(vtcr);
 	u32 sl0 = FIELD_GET(VTCR_EL2_SL0_MASK, vtcr);
-	u32 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0;
+	s8 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0;
 
 	pgd_sz = kvm_pgd_pages(ia_bits, start_level) * PAGE_SIZE;
 	pgt->pgd = (kvm_pteref_t)mm_ops->zalloc_pages_exact(pgd_sz);
@@ -1537,7 +1559,7 @@ size_t kvm_pgtable_stage2_pgd_size(u64 vtcr)
 {
 	u32 ia_bits = VTCR_EL2_IPA(vtcr);
 	u32 sl0 = FIELD_GET(VTCR_EL2_SL0_MASK, vtcr);
-	u32 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0;
+	s8 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0;
 
 	return kvm_pgd_pages(ia_bits, start_level) * PAGE_SIZE;
 }
@@ -1573,7 +1595,7 @@ void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt)
 	pgt->pgd = NULL;
 }
 
-void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, u32 level)
+void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, s8 level)
 {
 	kvm_pteref_t ptep = (kvm_pteref_t)pgtable;
 	struct kvm_pgtable_walker walker = {
diff --git a/arch/arm64/kvm/hyp/vhe/tlb.c b/arch/arm64/kvm/hyp/vhe/tlb.c
index b636b4111dbf..b32e2940df7d 100644
--- a/arch/arm64/kvm/hyp/vhe/tlb.c
+++ b/arch/arm64/kvm/hyp/vhe/tlb.c
@@ -216,18 +216,5 @@ void __kvm_flush_vm_context(void)
 {
 	dsb(ishst);
 	__tlbi(alle1is);
-
-	/*
-	 * VIPT and PIPT caches are not affected by VMID, so no maintenance
-	 * is necessary across a VMID rollover.
-	 *
-	 * VPIPT caches constrain lookup and maintenance to the active VMID,
-	 * so we need to invalidate lines with a stale VMID to avoid an ABA
-	 * race after multiple rollovers.
-	 *
-	 */
-	if (icache_is_vpipt())
-		asm volatile("ic ialluis");
-
 	dsb(ish);
 }
diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c
index d87c8fcc4c24..d14504821b79 100644
--- a/arch/arm64/kvm/mmu.c
+++ b/arch/arm64/kvm/mmu.c
@@ -223,12 +223,12 @@ static void stage2_free_unlinked_table_rcu_cb(struct rcu_head *head)
 {
 	struct page *page = container_of(head, struct page, rcu_head);
 	void *pgtable = page_to_virt(page);
-	u32 level = page_private(page);
+	s8 level = page_private(page);
 
 	kvm_pgtable_stage2_free_unlinked(&kvm_s2_mm_ops, pgtable, level);
 }
 
-static void stage2_free_unlinked_table(void *addr, u32 level)
+static void stage2_free_unlinked_table(void *addr, s8 level)
 {
 	struct page *page = virt_to_page(addr);
 
@@ -804,13 +804,13 @@ static int get_user_mapping_size(struct kvm *kvm, u64 addr)
 	struct kvm_pgtable pgt = {
 		.pgd		= (kvm_pteref_t)kvm->mm->pgd,
 		.ia_bits	= vabits_actual,
-		.start_level	= (KVM_PGTABLE_MAX_LEVELS -
-				   CONFIG_PGTABLE_LEVELS),
+		.start_level	= (KVM_PGTABLE_LAST_LEVEL -
+				   CONFIG_PGTABLE_LEVELS + 1),
 		.mm_ops		= &kvm_user_mm_ops,
 	};
 	unsigned long flags;
 	kvm_pte_t pte = 0;	/* Keep GCC quiet... */
-	u32 level = ~0;
+	s8 level = S8_MAX;
 	int ret;
 
 	/*
@@ -829,7 +829,9 @@ static int get_user_mapping_size(struct kvm *kvm, u64 addr)
 	 * Not seeing an error, but not updating level? Something went
 	 * deeply wrong...
 	 */
-	if (WARN_ON(level >= KVM_PGTABLE_MAX_LEVELS))
+	if (WARN_ON(level > KVM_PGTABLE_LAST_LEVEL))
+		return -EFAULT;
+	if (WARN_ON(level < KVM_PGTABLE_FIRST_LEVEL))
 		return -EFAULT;
 
 	/* Oops, the userspace PTs are gone... Replay the fault */
@@ -1374,7 +1376,7 @@ static bool kvm_vma_mte_allowed(struct vm_area_struct *vma)
 
 static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			  struct kvm_memory_slot *memslot, unsigned long hva,
-			  unsigned long fault_status)
+			  bool fault_is_perm)
 {
 	int ret = 0;
 	bool write_fault, writable, force_pte = false;
@@ -1388,17 +1390,17 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	gfn_t gfn;
 	kvm_pfn_t pfn;
 	bool logging_active = memslot_is_logging(memslot);
-	unsigned long fault_level = kvm_vcpu_trap_get_fault_level(vcpu);
 	long vma_pagesize, fault_granule;
 	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R;
 	struct kvm_pgtable *pgt;
 
-	fault_granule = 1UL << ARM64_HW_PGTABLE_LEVEL_SHIFT(fault_level);
+	if (fault_is_perm)
+		fault_granule = kvm_vcpu_trap_get_perm_fault_granule(vcpu);
 	write_fault = kvm_is_write_fault(vcpu);
 	exec_fault = kvm_vcpu_trap_is_exec_fault(vcpu);
 	VM_BUG_ON(write_fault && exec_fault);
 
-	if (fault_status == ESR_ELx_FSC_PERM && !write_fault && !exec_fault) {
+	if (fault_is_perm && !write_fault && !exec_fault) {
 		kvm_err("Unexpected L2 read permission error\n");
 		return -EFAULT;
 	}
@@ -1409,8 +1411,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * only exception to this is when dirty logging is enabled at runtime
 	 * and a write fault needs to collapse a block entry into a table.
 	 */
-	if (fault_status != ESR_ELx_FSC_PERM ||
-	    (logging_active && write_fault)) {
+	if (!fault_is_perm || (logging_active && write_fault)) {
 		ret = kvm_mmu_topup_memory_cache(memcache,
 						 kvm_mmu_cache_min_pages(vcpu->arch.hw_mmu));
 		if (ret)
@@ -1527,8 +1528,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * backed by a THP and thus use block mapping if possible.
 	 */
 	if (vma_pagesize == PAGE_SIZE && !(force_pte || device)) {
-		if (fault_status ==  ESR_ELx_FSC_PERM &&
-		    fault_granule > PAGE_SIZE)
+		if (fault_is_perm && fault_granule > PAGE_SIZE)
 			vma_pagesize = fault_granule;
 		else
 			vma_pagesize = transparent_hugepage_adjust(kvm, memslot,
@@ -1541,7 +1541,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		}
 	}
 
-	if (fault_status != ESR_ELx_FSC_PERM && !device && kvm_has_mte(kvm)) {
+	if (!fault_is_perm && !device && kvm_has_mte(kvm)) {
 		/* Check the VMM hasn't introduced a new disallowed VMA */
 		if (mte_allowed) {
 			sanitise_mte_tags(kvm, pfn, vma_pagesize);
@@ -1567,7 +1567,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * permissions only if vma_pagesize equals fault_granule. Otherwise,
 	 * kvm_pgtable_stage2_map() should be called to change block size.
 	 */
-	if (fault_status == ESR_ELx_FSC_PERM && vma_pagesize == fault_granule)
+	if (fault_is_perm && vma_pagesize == fault_granule)
 		ret = kvm_pgtable_stage2_relax_perms(pgt, fault_ipa, prot);
 	else
 		ret = kvm_pgtable_stage2_map(pgt, fault_ipa, vma_pagesize,
@@ -1618,7 +1618,7 @@ static void handle_access_fault(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa)
  */
 int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 {
-	unsigned long fault_status;
+	unsigned long esr;
 	phys_addr_t fault_ipa;
 	struct kvm_memory_slot *memslot;
 	unsigned long hva;
@@ -1626,12 +1626,12 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 	gfn_t gfn;
 	int ret, idx;
 
-	fault_status = kvm_vcpu_trap_get_fault_type(vcpu);
+	esr = kvm_vcpu_get_esr(vcpu);
 
 	fault_ipa = kvm_vcpu_get_fault_ipa(vcpu);
 	is_iabt = kvm_vcpu_trap_is_iabt(vcpu);
 
-	if (fault_status == ESR_ELx_FSC_FAULT) {
+	if (esr_fsc_is_permission_fault(esr)) {
 		/* Beyond sanitised PARange (which is the IPA limit) */
 		if (fault_ipa >= BIT_ULL(get_kvm_ipa_limit())) {
 			kvm_inject_size_fault(vcpu);
@@ -1666,9 +1666,9 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 			      kvm_vcpu_get_hfar(vcpu), fault_ipa);
 
 	/* Check the stage-2 fault is trans. fault or write fault */
-	if (fault_status != ESR_ELx_FSC_FAULT &&
-	    fault_status != ESR_ELx_FSC_PERM &&
-	    fault_status != ESR_ELx_FSC_ACCESS) {
+	if (!esr_fsc_is_translation_fault(esr) &&
+	    !esr_fsc_is_permission_fault(esr) &&
+	    !esr_fsc_is_access_flag_fault(esr)) {
 		kvm_err("Unsupported FSC: EC=%#x xFSC=%#lx ESR_EL2=%#lx\n",
 			kvm_vcpu_trap_get_class(vcpu),
 			(unsigned long)kvm_vcpu_trap_get_fault(vcpu),
@@ -1730,13 +1730,14 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 	/* Userspace should not be able to register out-of-bounds IPAs */
 	VM_BUG_ON(fault_ipa >= kvm_phys_size(vcpu->arch.hw_mmu));
 
-	if (fault_status == ESR_ELx_FSC_ACCESS) {
+	if (esr_fsc_is_access_flag_fault(esr)) {
 		handle_access_fault(vcpu, fault_ipa);
 		ret = 1;
 		goto out_unlock;
 	}
 
-	ret = user_mem_abort(vcpu, fault_ipa, memslot, hva, fault_status);
+	ret = user_mem_abort(vcpu, fault_ipa, memslot, hva,
+			     esr_fsc_is_permission_fault(esr));
 	if (ret == 0)
 		ret = 1;
 out:
diff --git a/arch/arm64/kvm/nested.c b/arch/arm64/kvm/nested.c
index 042695a210ce..ba95d044bc98 100644
--- a/arch/arm64/kvm/nested.c
+++ b/arch/arm64/kvm/nested.c
@@ -23,13 +23,9 @@
  * This list should get updated as new features get added to the NV
  * support, and new extension to the architecture.
  */
-void access_nested_id_reg(struct kvm_vcpu *v, struct sys_reg_params *p,
-			  const struct sys_reg_desc *r)
+static u64 limit_nv_id_reg(u32 id, u64 val)
 {
-	u32 id = reg_to_encoding(r);
-	u64 val, tmp;
-
-	val = p->regval;
+	u64 tmp;
 
 	switch (id) {
 	case SYS_ID_AA64ISAR0_EL1:
@@ -158,5 +154,17 @@ void access_nested_id_reg(struct kvm_vcpu *v, struct sys_reg_params *p,
 		break;
 	}
 
-	p->regval = val;
+	return val;
+}
+int kvm_init_nv_sysregs(struct kvm *kvm)
+{
+	mutex_lock(&kvm->arch.config_lock);
+
+	for (int i = 0; i < KVM_ARM_ID_REG_NUM; i++)
+		kvm->arch.id_regs[i] = limit_nv_id_reg(IDX_IDREG(i),
+						       kvm->arch.id_regs[i]);
+
+	mutex_unlock(&kvm->arch.config_lock);
+
+	return 0;
 }
diff --git a/arch/arm64/kvm/pkvm.c b/arch/arm64/kvm/pkvm.c
index 8350fb8fee0b..b7be96a53597 100644
--- a/arch/arm64/kvm/pkvm.c
+++ b/arch/arm64/kvm/pkvm.c
@@ -101,6 +101,17 @@ void __init kvm_hyp_reserve(void)
 		 hyp_mem_base);
 }
 
+static void __pkvm_destroy_hyp_vm(struct kvm *host_kvm)
+{
+	if (host_kvm->arch.pkvm.handle) {
+		WARN_ON(kvm_call_hyp_nvhe(__pkvm_teardown_vm,
+					  host_kvm->arch.pkvm.handle));
+	}
+
+	host_kvm->arch.pkvm.handle = 0;
+	free_hyp_memcache(&host_kvm->arch.pkvm.teardown_mc);
+}
+
 /*
  * Allocates and donates memory for hypervisor VM structs at EL2.
  *
@@ -181,7 +192,7 @@ static int __pkvm_create_hyp_vm(struct kvm *host_kvm)
 	return 0;
 
 destroy_vm:
-	pkvm_destroy_hyp_vm(host_kvm);
+	__pkvm_destroy_hyp_vm(host_kvm);
 	return ret;
 free_vm:
 	free_pages_exact(hyp_vm, hyp_vm_sz);
@@ -194,23 +205,19 @@ int pkvm_create_hyp_vm(struct kvm *host_kvm)
 {
 	int ret = 0;
 
-	mutex_lock(&host_kvm->lock);
+	mutex_lock(&host_kvm->arch.config_lock);
 	if (!host_kvm->arch.pkvm.handle)
 		ret = __pkvm_create_hyp_vm(host_kvm);
-	mutex_unlock(&host_kvm->lock);
+	mutex_unlock(&host_kvm->arch.config_lock);
 
 	return ret;
 }
 
 void pkvm_destroy_hyp_vm(struct kvm *host_kvm)
 {
-	if (host_kvm->arch.pkvm.handle) {
-		WARN_ON(kvm_call_hyp_nvhe(__pkvm_teardown_vm,
-					  host_kvm->arch.pkvm.handle));
-	}
-
-	host_kvm->arch.pkvm.handle = 0;
-	free_hyp_memcache(&host_kvm->arch.pkvm.teardown_mc);
+	mutex_lock(&host_kvm->arch.config_lock);
+	__pkvm_destroy_hyp_vm(host_kvm);
+	mutex_unlock(&host_kvm->arch.config_lock);
 }
 
 int pkvm_init_host_vm(struct kvm *host_kvm)
diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c
index fe99b3dab6ce..3d9467ff73bc 100644
--- a/arch/arm64/kvm/pmu-emul.c
+++ b/arch/arm64/kvm/pmu-emul.c
@@ -267,9 +267,8 @@ void kvm_pmu_vcpu_destroy(struct kvm_vcpu *vcpu)
 
 u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu)
 {
-	u64 val = kvm_vcpu_read_pmcr(vcpu) >> ARMV8_PMU_PMCR_N_SHIFT;
+	u64 val = FIELD_GET(ARMV8_PMU_PMCR_N, kvm_vcpu_read_pmcr(vcpu));
 
-	val &= ARMV8_PMU_PMCR_N_MASK;
 	if (val == 0)
 		return BIT(ARMV8_PMU_CYCLE_IDX);
 	else
@@ -1136,8 +1135,7 @@ u8 kvm_arm_pmu_get_pmuver_limit(void)
  */
 u64 kvm_vcpu_read_pmcr(struct kvm_vcpu *vcpu)
 {
-	u64 pmcr = __vcpu_sys_reg(vcpu, PMCR_EL0) &
-			~(ARMV8_PMU_PMCR_N_MASK << ARMV8_PMU_PMCR_N_SHIFT);
+	u64 pmcr = __vcpu_sys_reg(vcpu, PMCR_EL0);
 
-	return pmcr | ((u64)vcpu->kvm->arch.pmcr_n << ARMV8_PMU_PMCR_N_SHIFT);
+	return u64_replace_bits(pmcr, vcpu->kvm->arch.pmcr_n, ARMV8_PMU_PMCR_N);
 }
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index 5bb4de162cab..68d1d05672bd 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -280,12 +280,11 @@ int __init kvm_set_ipa_limit(void)
 	parange = cpuid_feature_extract_unsigned_field(mmfr0,
 				ID_AA64MMFR0_EL1_PARANGE_SHIFT);
 	/*
-	 * IPA size beyond 48 bits could not be supported
-	 * on either 4K or 16K page size. Hence let's cap
-	 * it to 48 bits, in case it's reported as larger
-	 * on the system.
+	 * IPA size beyond 48 bits for 4K and 16K page size is only supported
+	 * when LPA2 is available. So if we have LPA2, enable it, else cap to 48
+	 * bits, in case it's reported as larger on the system.
 	 */
-	if (PAGE_SIZE != SZ_64K)
+	if (!kvm_lpa2_is_enabled() && PAGE_SIZE != SZ_64K)
 		parange = min(parange, (unsigned int)ID_AA64MMFR0_EL1_PARANGE_48);
 
 	/*
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 4735e1b37fb3..30253bd19917 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -45,44 +45,170 @@ static u64 sys_reg_to_index(const struct sys_reg_desc *reg);
 static int set_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 		      u64 val);
 
-static bool read_from_write_only(struct kvm_vcpu *vcpu,
-				 struct sys_reg_params *params,
-				 const struct sys_reg_desc *r)
+static bool bad_trap(struct kvm_vcpu *vcpu,
+		     struct sys_reg_params *params,
+		     const struct sys_reg_desc *r,
+		     const char *msg)
 {
-	WARN_ONCE(1, "Unexpected sys_reg read to write-only register\n");
+	WARN_ONCE(1, "Unexpected %s\n", msg);
 	print_sys_reg_instr(params);
 	kvm_inject_undefined(vcpu);
 	return false;
 }
 
+static bool read_from_write_only(struct kvm_vcpu *vcpu,
+				 struct sys_reg_params *params,
+				 const struct sys_reg_desc *r)
+{
+	return bad_trap(vcpu, params, r,
+			"sys_reg read to write-only register");
+}
+
 static bool write_to_read_only(struct kvm_vcpu *vcpu,
 			       struct sys_reg_params *params,
 			       const struct sys_reg_desc *r)
 {
-	WARN_ONCE(1, "Unexpected sys_reg write to read-only register\n");
-	print_sys_reg_instr(params);
-	kvm_inject_undefined(vcpu);
-	return false;
+	return bad_trap(vcpu, params, r,
+			"sys_reg write to read-only register");
+}
+
+#define PURE_EL2_SYSREG(el2)						\
+	case el2: {							\
+		*el1r = el2;						\
+		return true;						\
+	}
+
+#define MAPPED_EL2_SYSREG(el2, el1, fn)					\
+	case el2: {							\
+		*xlate = fn;						\
+		*el1r = el1;						\
+		return true;						\
+	}
+
+static bool get_el2_to_el1_mapping(unsigned int reg,
+				   unsigned int *el1r, u64 (**xlate)(u64))
+{
+	switch (reg) {
+		PURE_EL2_SYSREG(  VPIDR_EL2	);
+		PURE_EL2_SYSREG(  VMPIDR_EL2	);
+		PURE_EL2_SYSREG(  ACTLR_EL2	);
+		PURE_EL2_SYSREG(  HCR_EL2	);
+		PURE_EL2_SYSREG(  MDCR_EL2	);
+		PURE_EL2_SYSREG(  HSTR_EL2	);
+		PURE_EL2_SYSREG(  HACR_EL2	);
+		PURE_EL2_SYSREG(  VTTBR_EL2	);
+		PURE_EL2_SYSREG(  VTCR_EL2	);
+		PURE_EL2_SYSREG(  RVBAR_EL2	);
+		PURE_EL2_SYSREG(  TPIDR_EL2	);
+		PURE_EL2_SYSREG(  HPFAR_EL2	);
+		PURE_EL2_SYSREG(  CNTHCTL_EL2	);
+		MAPPED_EL2_SYSREG(SCTLR_EL2,   SCTLR_EL1,
+				  translate_sctlr_el2_to_sctlr_el1	     );
+		MAPPED_EL2_SYSREG(CPTR_EL2,    CPACR_EL1,
+				  translate_cptr_el2_to_cpacr_el1	     );
+		MAPPED_EL2_SYSREG(TTBR0_EL2,   TTBR0_EL1,
+				  translate_ttbr0_el2_to_ttbr0_el1	     );
+		MAPPED_EL2_SYSREG(TTBR1_EL2,   TTBR1_EL1,   NULL	     );
+		MAPPED_EL2_SYSREG(TCR_EL2,     TCR_EL1,
+				  translate_tcr_el2_to_tcr_el1		     );
+		MAPPED_EL2_SYSREG(VBAR_EL2,    VBAR_EL1,    NULL	     );
+		MAPPED_EL2_SYSREG(AFSR0_EL2,   AFSR0_EL1,   NULL	     );
+		MAPPED_EL2_SYSREG(AFSR1_EL2,   AFSR1_EL1,   NULL	     );
+		MAPPED_EL2_SYSREG(ESR_EL2,     ESR_EL1,     NULL	     );
+		MAPPED_EL2_SYSREG(FAR_EL2,     FAR_EL1,     NULL	     );
+		MAPPED_EL2_SYSREG(MAIR_EL2,    MAIR_EL1,    NULL	     );
+		MAPPED_EL2_SYSREG(AMAIR_EL2,   AMAIR_EL1,   NULL	     );
+		MAPPED_EL2_SYSREG(ELR_EL2,     ELR_EL1,	    NULL	     );
+		MAPPED_EL2_SYSREG(SPSR_EL2,    SPSR_EL1,    NULL	     );
+	default:
+		return false;
+	}
 }
 
 u64 vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg)
 {
 	u64 val = 0x8badf00d8badf00d;
+	u64 (*xlate)(u64) = NULL;
+	unsigned int el1r;
+
+	if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU))
+		goto memory_read;
 
-	if (vcpu_get_flag(vcpu, SYSREGS_ON_CPU) &&
-	    __vcpu_read_sys_reg_from_cpu(reg, &val))
+	if (unlikely(get_el2_to_el1_mapping(reg, &el1r, &xlate))) {
+		if (!is_hyp_ctxt(vcpu))
+			goto memory_read;
+
+		/*
+		 * If this register does not have an EL1 counterpart,
+		 * then read the stored EL2 version.
+		 */
+		if (reg == el1r)
+			goto memory_read;
+
+		/*
+		 * If we have a non-VHE guest and that the sysreg
+		 * requires translation to be used at EL1, use the
+		 * in-memory copy instead.
+		 */
+		if (!vcpu_el2_e2h_is_set(vcpu) && xlate)
+			goto memory_read;
+
+		/* Get the current version of the EL1 counterpart. */
+		WARN_ON(!__vcpu_read_sys_reg_from_cpu(el1r, &val));
 		return val;
+	}
 
+	/* EL1 register can't be on the CPU if the guest is in vEL2. */
+	if (unlikely(is_hyp_ctxt(vcpu)))
+		goto memory_read;
+
+	if (__vcpu_read_sys_reg_from_cpu(reg, &val))
+		return val;
+
+memory_read:
 	return __vcpu_sys_reg(vcpu, reg);
 }
 
 void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg)
 {
-	if (vcpu_get_flag(vcpu, SYSREGS_ON_CPU) &&
-	    __vcpu_write_sys_reg_to_cpu(val, reg))
+	u64 (*xlate)(u64) = NULL;
+	unsigned int el1r;
+
+	if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU))
+		goto memory_write;
+
+	if (unlikely(get_el2_to_el1_mapping(reg, &el1r, &xlate))) {
+		if (!is_hyp_ctxt(vcpu))
+			goto memory_write;
+
+		/*
+		 * Always store a copy of the write to memory to avoid having
+		 * to reverse-translate virtual EL2 system registers for a
+		 * non-VHE guest hypervisor.
+		 */
+		__vcpu_sys_reg(vcpu, reg) = val;
+
+		/* No EL1 counterpart? We're done here.? */
+		if (reg == el1r)
+			return;
+
+		if (!vcpu_el2_e2h_is_set(vcpu) && xlate)
+			val = xlate(val);
+
+		/* Redirect this to the EL1 version of the register. */
+		WARN_ON(!__vcpu_write_sys_reg_to_cpu(val, el1r));
+		return;
+	}
+
+	/* EL1 register can't be on the CPU if the guest is in vEL2. */
+	if (unlikely(is_hyp_ctxt(vcpu)))
+		goto memory_write;
+
+	if (__vcpu_write_sys_reg_to_cpu(val, reg))
 		return;
 
-	__vcpu_sys_reg(vcpu, reg) = val;
+memory_write:
+	 __vcpu_sys_reg(vcpu, reg) = val;
 }
 
 /* CSSELR values; used to index KVM_REG_ARM_DEMUX_ID_CCSIDR */
@@ -877,7 +1003,7 @@ static bool pmu_counter_idx_valid(struct kvm_vcpu *vcpu, u64 idx)
 	u64 pmcr, val;
 
 	pmcr = kvm_vcpu_read_pmcr(vcpu);
-	val = (pmcr >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK;
+	val = FIELD_GET(ARMV8_PMU_PMCR_N, pmcr);
 	if (idx >= val && idx != ARMV8_PMU_CYCLE_IDX) {
 		kvm_inject_undefined(vcpu);
 		return false;
@@ -1143,7 +1269,7 @@ static int get_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 static int set_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 		    u64 val)
 {
-	u8 new_n = (val >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK;
+	u8 new_n = FIELD_GET(ARMV8_PMU_PMCR_N, val);
 	struct kvm *kvm = vcpu->kvm;
 
 	mutex_lock(&kvm->arch.config_lock);
@@ -1505,8 +1631,6 @@ static bool access_id_reg(struct kvm_vcpu *vcpu,
 		return write_to_read_only(vcpu, p, r);
 
 	p->regval = read_id_reg(vcpu, r);
-	if (vcpu_has_nv(vcpu))
-		access_nested_id_reg(vcpu, p, r);
 
 	return true;
 }
@@ -1885,6 +2009,32 @@ static unsigned int el2_visibility(const struct kvm_vcpu *vcpu,
 	return REG_HIDDEN;
 }
 
+static bool bad_vncr_trap(struct kvm_vcpu *vcpu,
+			  struct sys_reg_params *p,
+			  const struct sys_reg_desc *r)
+{
+	/*
+	 * We really shouldn't be here, and this is likely the result
+	 * of a misconfigured trap, as this register should target the
+	 * VNCR page, and nothing else.
+	 */
+	return bad_trap(vcpu, p, r,
+			"trap of VNCR-backed register");
+}
+
+static bool bad_redir_trap(struct kvm_vcpu *vcpu,
+			   struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	/*
+	 * We really shouldn't be here, and this is likely the result
+	 * of a misconfigured trap, as this register should target the
+	 * corresponding EL1, and nothing else.
+	 */
+	return bad_trap(vcpu, p, r,
+			"trap of EL2 register redirected to EL1");
+}
+
 #define EL2_REG(name, acc, rst, v) {		\
 	SYS_DESC(SYS_##name),			\
 	.access = acc,				\
@@ -1894,6 +2044,9 @@ static unsigned int el2_visibility(const struct kvm_vcpu *vcpu,
 	.val = v,				\
 }
 
+#define EL2_REG_VNCR(name, rst, v)	EL2_REG(name, bad_vncr_trap, rst, v)
+#define EL2_REG_REDIR(name, rst, v)	EL2_REG(name, bad_redir_trap, rst, v)
+
 /*
  * EL{0,1}2 registers are the EL2 view on an EL0 or EL1 register when
  * HCR_EL2.E2H==1, and only in the sysreg table for convenience of
@@ -2508,32 +2661,33 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ PMU_SYS_REG(PMCCFILTR_EL0), .access = access_pmu_evtyper,
 	  .reset = reset_val, .reg = PMCCFILTR_EL0, .val = 0 },
 
-	EL2_REG(VPIDR_EL2, access_rw, reset_unknown, 0),
-	EL2_REG(VMPIDR_EL2, access_rw, reset_unknown, 0),
+	EL2_REG_VNCR(VPIDR_EL2, reset_unknown, 0),
+	EL2_REG_VNCR(VMPIDR_EL2, reset_unknown, 0),
 	EL2_REG(SCTLR_EL2, access_rw, reset_val, SCTLR_EL2_RES1),
 	EL2_REG(ACTLR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HCR_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(HCR_EL2, reset_val, 0),
 	EL2_REG(MDCR_EL2, access_rw, reset_val, 0),
 	EL2_REG(CPTR_EL2, access_rw, reset_val, CPTR_NVHE_EL2_RES1),
-	EL2_REG(HSTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HFGRTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HFGWTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HFGITR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HACR_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(HSTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HFGRTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HFGWTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HFGITR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HACR_EL2, reset_val, 0),
 
-	EL2_REG(HCRX_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(HCRX_EL2, reset_val, 0),
 
 	EL2_REG(TTBR0_EL2, access_rw, reset_val, 0),
 	EL2_REG(TTBR1_EL2, access_rw, reset_val, 0),
 	EL2_REG(TCR_EL2, access_rw, reset_val, TCR_EL2_RES1),
-	EL2_REG(VTTBR_EL2, access_rw, reset_val, 0),
-	EL2_REG(VTCR_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(VTTBR_EL2, reset_val, 0),
+	EL2_REG_VNCR(VTCR_EL2, reset_val, 0),
 
 	{ SYS_DESC(SYS_DACR32_EL2), trap_undef, reset_unknown, DACR32_EL2 },
-	EL2_REG(HDFGRTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HDFGWTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(SPSR_EL2, access_rw, reset_val, 0),
-	EL2_REG(ELR_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(HDFGRTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HDFGWTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HAFGRTR_EL2, reset_val, 0),
+	EL2_REG_REDIR(SPSR_EL2, reset_val, 0),
+	EL2_REG_REDIR(ELR_EL2, reset_val, 0),
 	{ SYS_DESC(SYS_SP_EL1), access_sp_el1},
 
 	/* AArch32 SPSR_* are RES0 if trapped from a NV guest */
@@ -2549,10 +2703,10 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ SYS_DESC(SYS_IFSR32_EL2), trap_undef, reset_unknown, IFSR32_EL2 },
 	EL2_REG(AFSR0_EL2, access_rw, reset_val, 0),
 	EL2_REG(AFSR1_EL2, access_rw, reset_val, 0),
-	EL2_REG(ESR_EL2, access_rw, reset_val, 0),
+	EL2_REG_REDIR(ESR_EL2, reset_val, 0),
 	{ SYS_DESC(SYS_FPEXC32_EL2), trap_undef, reset_val, FPEXC32_EL2, 0x700 },
 
-	EL2_REG(FAR_EL2, access_rw, reset_val, 0),
+	EL2_REG_REDIR(FAR_EL2, reset_val, 0),
 	EL2_REG(HPFAR_EL2, access_rw, reset_val, 0),
 
 	EL2_REG(MAIR_EL2, access_rw, reset_val, 0),
@@ -2565,24 +2719,9 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	EL2_REG(CONTEXTIDR_EL2, access_rw, reset_val, 0),
 	EL2_REG(TPIDR_EL2, access_rw, reset_val, 0),
 
-	EL2_REG(CNTVOFF_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(CNTVOFF_EL2, reset_val, 0),
 	EL2_REG(CNTHCTL_EL2, access_rw, reset_val, 0),
 
-	EL12_REG(SCTLR, access_vm_reg, reset_val, 0x00C50078),
-	EL12_REG(CPACR, access_rw, reset_val, 0),
-	EL12_REG(TTBR0, access_vm_reg, reset_unknown, 0),
-	EL12_REG(TTBR1, access_vm_reg, reset_unknown, 0),
-	EL12_REG(TCR, access_vm_reg, reset_val, 0),
-	{ SYS_DESC(SYS_SPSR_EL12), access_spsr},
-	{ SYS_DESC(SYS_ELR_EL12), access_elr},
-	EL12_REG(AFSR0, access_vm_reg, reset_unknown, 0),
-	EL12_REG(AFSR1, access_vm_reg, reset_unknown, 0),
-	EL12_REG(ESR, access_vm_reg, reset_unknown, 0),
-	EL12_REG(FAR, access_vm_reg, reset_unknown, 0),
-	EL12_REG(MAIR, access_vm_reg, reset_unknown, 0),
-	EL12_REG(AMAIR, access_vm_reg, reset_amair_el1, 0),
-	EL12_REG(VBAR, access_rw, reset_val, 0),
-	EL12_REG(CONTEXTIDR, access_vm_reg, reset_val, 0),
 	EL12_REG(CNTKCTL, access_rw, reset_val, 0),
 
 	EL2_REG(SP_EL2, NULL, reset_unknown, 0),
diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c
index 2dad2d095160..28a93074eca1 100644
--- a/arch/arm64/kvm/vgic/vgic-its.c
+++ b/arch/arm64/kvm/vgic/vgic-its.c
@@ -468,6 +468,9 @@ static int its_sync_lpi_pending_table(struct kvm_vcpu *vcpu)
 		}
 
 		irq = vgic_get_irq(vcpu->kvm, NULL, intids[i]);
+		if (!irq)
+			continue;
+
 		raw_spin_lock_irqsave(&irq->irq_lock, flags);
 		irq->pending_latch = pendmask & (1U << bit_nr);
 		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
@@ -590,7 +593,11 @@ static struct vgic_irq *vgic_its_check_cache(struct kvm *kvm, phys_addr_t db,
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
+
 	irq = __vgic_its_check_cache(dist, db, devid, eventid);
+	if (irq)
+		vgic_get_irq_kref(irq);
+
 	raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags);
 
 	return irq;
@@ -769,6 +776,7 @@ int vgic_its_inject_cached_translation(struct kvm *kvm, struct kvm_msi *msi)
 	raw_spin_lock_irqsave(&irq->irq_lock, flags);
 	irq->pending_latch = true;
 	vgic_queue_irq_unlock(kvm, irq, flags);
+	vgic_put_irq(kvm, irq);
 
 	return 0;
 }
@@ -1427,6 +1435,8 @@ static int vgic_its_cmd_handle_movall(struct kvm *kvm, struct vgic_its *its,
 
 	for (i = 0; i < irq_count; i++) {
 		irq = vgic_get_irq(kvm, NULL, intids[i]);
+		if (!irq)
+			continue;
 
 		update_affinity(irq, vcpu2);
 
diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
index a764b0ab8bf9..c15ee1df036a 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
@@ -357,31 +357,13 @@ static int vgic_v3_uaccess_write_pending(struct kvm_vcpu *vcpu,
 					 gpa_t addr, unsigned int len,
 					 unsigned long val)
 {
-	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
-	int i;
-	unsigned long flags;
-
-	for (i = 0; i < len * 8; i++) {
-		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
-
-		raw_spin_lock_irqsave(&irq->irq_lock, flags);
-		if (test_bit(i, &val)) {
-			/*
-			 * pending_latch is set irrespective of irq type
-			 * (level or edge) to avoid dependency that VM should
-			 * restore irq config before pending info.
-			 */
-			irq->pending_latch = true;
-			vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
-		} else {
-			irq->pending_latch = false;
-			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
-		}
+	int ret;
 
-		vgic_put_irq(vcpu->kvm, irq);
-	}
+	ret = vgic_uaccess_write_spending(vcpu, addr, len, val);
+	if (ret)
+		return ret;
 
-	return 0;
+	return vgic_uaccess_write_cpending(vcpu, addr, len, ~val);
 }
 
 /* We want to avoid outer shareable. */
diff --git a/arch/arm64/kvm/vgic/vgic-mmio.c b/arch/arm64/kvm/vgic/vgic-mmio.c
index ff558c05e990..cf76523a2194 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio.c
@@ -301,9 +301,8 @@ static bool is_vgic_v2_sgi(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
 		vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2);
 }
 
-void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
-			      gpa_t addr, unsigned int len,
-			      unsigned long val)
+static void __set_pending(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len,
+			  unsigned long val, bool is_user)
 {
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 	int i;
@@ -312,14 +311,22 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
 	for_each_set_bit(i, &val, len * 8) {
 		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
 
-		/* GICD_ISPENDR0 SGI bits are WI */
-		if (is_vgic_v2_sgi(vcpu, irq)) {
+		/* GICD_ISPENDR0 SGI bits are WI when written from the guest. */
+		if (is_vgic_v2_sgi(vcpu, irq) && !is_user) {
 			vgic_put_irq(vcpu->kvm, irq);
 			continue;
 		}
 
 		raw_spin_lock_irqsave(&irq->irq_lock, flags);
 
+		/*
+		 * GICv2 SGIs are terribly broken. We can't restore
+		 * the source of the interrupt, so just pick the vcpu
+		 * itself as the source...
+		 */
+		if (is_vgic_v2_sgi(vcpu, irq))
+			irq->source |= BIT(vcpu->vcpu_id);
+
 		if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
 			/* HW SGI? Ask the GIC to inject it */
 			int err;
@@ -335,7 +342,7 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
 		}
 
 		irq->pending_latch = true;
-		if (irq->hw)
+		if (irq->hw && !is_user)
 			vgic_irq_set_phys_active(irq, true);
 
 		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
@@ -343,33 +350,18 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
 	}
 }
 
+void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
+			      gpa_t addr, unsigned int len,
+			      unsigned long val)
+{
+	__set_pending(vcpu, addr, len, val, false);
+}
+
 int vgic_uaccess_write_spending(struct kvm_vcpu *vcpu,
 				gpa_t addr, unsigned int len,
 				unsigned long val)
 {
-	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
-	int i;
-	unsigned long flags;
-
-	for_each_set_bit(i, &val, len * 8) {
-		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
-
-		raw_spin_lock_irqsave(&irq->irq_lock, flags);
-		irq->pending_latch = true;
-
-		/*
-		 * GICv2 SGIs are terribly broken. We can't restore
-		 * the source of the interrupt, so just pick the vcpu
-		 * itself as the source...
-		 */
-		if (is_vgic_v2_sgi(vcpu, irq))
-			irq->source |= BIT(vcpu->vcpu_id);
-
-		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
-
-		vgic_put_irq(vcpu->kvm, irq);
-	}
-
+	__set_pending(vcpu, addr, len, val, true);
 	return 0;
 }
 
@@ -394,9 +386,9 @@ static void vgic_hw_irq_cpending(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
 		vgic_irq_set_phys_active(irq, false);
 }
 
-void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
-			      gpa_t addr, unsigned int len,
-			      unsigned long val)
+static void __clear_pending(struct kvm_vcpu *vcpu,
+			    gpa_t addr, unsigned int len,
+			    unsigned long val, bool is_user)
 {
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 	int i;
@@ -405,14 +397,22 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 	for_each_set_bit(i, &val, len * 8) {
 		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
 
-		/* GICD_ICPENDR0 SGI bits are WI */
-		if (is_vgic_v2_sgi(vcpu, irq)) {
+		/* GICD_ICPENDR0 SGI bits are WI when written from the guest. */
+		if (is_vgic_v2_sgi(vcpu, irq) && !is_user) {
 			vgic_put_irq(vcpu->kvm, irq);
 			continue;
 		}
 
 		raw_spin_lock_irqsave(&irq->irq_lock, flags);
 
+		/*
+		 * More fun with GICv2 SGIs! If we're clearing one of them
+		 * from userspace, which source vcpu to clear? Let's not
+		 * even think of it, and blow the whole set.
+		 */
+		if (is_vgic_v2_sgi(vcpu, irq))
+			irq->source = 0;
+
 		if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
 			/* HW SGI? Ask the GIC to clear its pending bit */
 			int err;
@@ -427,7 +427,7 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 			continue;
 		}
 
-		if (irq->hw)
+		if (irq->hw && !is_user)
 			vgic_hw_irq_cpending(vcpu, irq);
 		else
 			irq->pending_latch = false;
@@ -437,33 +437,18 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 	}
 }
 
+void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
+			      gpa_t addr, unsigned int len,
+			      unsigned long val)
+{
+	__clear_pending(vcpu, addr, len, val, false);
+}
+
 int vgic_uaccess_write_cpending(struct kvm_vcpu *vcpu,
 				gpa_t addr, unsigned int len,
 				unsigned long val)
 {
-	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
-	int i;
-	unsigned long flags;
-
-	for_each_set_bit(i, &val, len * 8) {
-		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
-
-		raw_spin_lock_irqsave(&irq->irq_lock, flags);
-		/*
-		 * More fun with GICv2 SGIs! If we're clearing one of them
-		 * from userspace, which source vcpu to clear? Let's not
-		 * even think of it, and blow the whole set.
-		 */
-		if (is_vgic_v2_sgi(vcpu, irq))
-			irq->source = 0;
-
-		irq->pending_latch = false;
-
-		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
-
-		vgic_put_irq(vcpu->kvm, irq);
-	}
-
+	__clear_pending(vcpu, addr, len, val, true);
 	return 0;
 }
 
diff --git a/arch/arm64/lib/copy_page.S b/arch/arm64/lib/copy_page.S
index c336d2ffdec5..6a56d7cf309d 100644
--- a/arch/arm64/lib/copy_page.S
+++ b/arch/arm64/lib/copy_page.S
@@ -18,13 +18,6 @@
  *	x1 - src
  */
 SYM_FUNC_START(__pi_copy_page)
-alternative_if ARM64_HAS_NO_HW_PREFETCH
-	// Prefetch three cache lines ahead.
-	prfm	pldl1strm, [x1, #128]
-	prfm	pldl1strm, [x1, #256]
-	prfm	pldl1strm, [x1, #384]
-alternative_else_nop_endif
-
 	ldp	x2, x3, [x1]
 	ldp	x4, x5, [x1, #16]
 	ldp	x6, x7, [x1, #32]
@@ -39,10 +32,6 @@ alternative_else_nop_endif
 1:
 	tst	x0, #(PAGE_SIZE - 1)
 
-alternative_if ARM64_HAS_NO_HW_PREFETCH
-	prfm	pldl1strm, [x1, #384]
-alternative_else_nop_endif
-
 	stnp	x2, x3, [x0, #-256]
 	ldp	x2, x3, [x1]
 	stnp	x4, x5, [x0, #16 - 256]
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index 3cb101e8cb29..61886e43e3a1 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -47,7 +47,7 @@ void arch_teardown_dma_ops(struct device *dev)
 #endif
 
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			const struct iommu_ops *iommu, bool coherent)
+			bool coherent)
 {
 	int cls = cache_line_size_of_cpu();
 
@@ -58,7 +58,7 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 		   ARCH_DMA_MINALIGN, cls);
 
 	dev->dma_coherent = coherent;
-	if (iommu)
+	if (device_iommu_mapped(dev))
 		iommu_setup_dma_ops(dev, dma_base, dma_base + size - 1);
 
 	xen_setup_dma_ops(dev);
diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
index f5aae342632c..8116ac599f80 100644
--- a/arch/arm64/mm/hugetlbpage.c
+++ b/arch/arm64/mm/hugetlbpage.c
@@ -51,7 +51,7 @@ void __init arm64_hugetlb_cma_reserve(void)
 	 * page allocator. Just warn if there is any change
 	 * breaking this assumption.
 	 */
-	WARN_ON(order <= MAX_ORDER);
+	WARN_ON(order <= MAX_PAGE_ORDER);
 	hugetlb_cma_reserve(order);
 }
 #endif /* CONFIG_CMA */
diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c
index 555285ebd5af..4c7ad574b946 100644
--- a/arch/arm64/mm/kasan_init.c
+++ b/arch/arm64/mm/kasan_init.c
@@ -170,6 +170,11 @@ asmlinkage void __init kasan_early_init(void)
 {
 	BUILD_BUG_ON(KASAN_SHADOW_OFFSET !=
 		KASAN_SHADOW_END - (1UL << (64 - KASAN_SHADOW_SCALE_SHIFT)));
+	/*
+	 * We cannot check the actual value of KASAN_SHADOW_START during build,
+	 * as it depends on vabits_actual. As a best-effort approach, check
+	 * potential values calculated based on VA_BITS and VA_BITS_MIN.
+	 */
 	BUILD_BUG_ON(!IS_ALIGNED(_KASAN_SHADOW_START(VA_BITS), PGDIR_SIZE));
 	BUILD_BUG_ON(!IS_ALIGNED(_KASAN_SHADOW_START(VA_BITS_MIN), PGDIR_SIZE));
 	BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE));
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 15f6347d23b6..1ac7467d34c9 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -52,9 +52,6 @@ u64 vabits_actual __ro_after_init = VA_BITS_MIN;
 EXPORT_SYMBOL(vabits_actual);
 #endif
 
-u64 kimage_vaddr __ro_after_init = (u64)&_text;
-EXPORT_SYMBOL(kimage_vaddr);
-
 u64 kimage_voffset __ro_after_init;
 EXPORT_SYMBOL(kimage_voffset);
 
@@ -674,6 +671,9 @@ static int __init map_entry_trampoline(void)
 {
 	int i;
 
+	if (!arm64_kernel_unmapped_at_el0())
+		return 0;
+
 	pgprot_t prot = kernel_exec_prot();
 	phys_addr_t pa_start = __pa_symbol(__entry_tramp_text_start);
 
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index 7d4af64e3982..8955da5c47cf 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1828,7 +1828,7 @@ static void restore_args(struct jit_ctx *ctx, int args_off, int nregs)
  *
  */
 static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
-			      struct bpf_tramp_links *tlinks, void *orig_call,
+			      struct bpf_tramp_links *tlinks, void *func_addr,
 			      int nregs, u32 flags)
 {
 	int i;
@@ -1926,7 +1926,7 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 
 	if (flags & BPF_TRAMP_F_IP_ARG) {
 		/* save ip address of the traced function */
-		emit_addr_mov_i64(A64_R(10), (const u64)orig_call, ctx);
+		emit_addr_mov_i64(A64_R(10), (const u64)func_addr, ctx);
 		emit(A64_STR64I(A64_R(10), A64_SP, ip_off), ctx);
 	}
 
@@ -2026,18 +2026,10 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	return ctx->idx;
 }
 
-int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
-				void *image_end, const struct btf_func_model *m,
-				u32 flags, struct bpf_tramp_links *tlinks,
-				void *orig_call)
+static int btf_func_model_nregs(const struct btf_func_model *m)
 {
-	int i, ret;
 	int nregs = m->nr_args;
-	int max_insns = ((long)image_end - (long)image) / AARCH64_INSN_SIZE;
-	struct jit_ctx ctx = {
-		.image = NULL,
-		.idx = 0,
-	};
+	int i;
 
 	/* extra registers needed for struct argument */
 	for (i = 0; i < MAX_BPF_FUNC_ARGS; i++) {
@@ -2046,22 +2038,49 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
 			nregs += (m->arg_size[i] + 7) / 8 - 1;
 	}
 
+	return nregs;
+}
+
+int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags,
+			     struct bpf_tramp_links *tlinks, void *func_addr)
+{
+	struct jit_ctx ctx = {
+		.image = NULL,
+		.idx = 0,
+	};
+	struct bpf_tramp_image im;
+	int nregs, ret;
+
+	nregs = btf_func_model_nregs(m);
 	/* the first 8 registers are used for arguments */
 	if (nregs > 8)
 		return -ENOTSUPP;
 
-	ret = prepare_trampoline(&ctx, im, tlinks, orig_call, nregs, flags);
+	ret = prepare_trampoline(&ctx, &im, tlinks, func_addr, nregs, flags);
 	if (ret < 0)
 		return ret;
 
-	if (ret > max_insns)
-		return -EFBIG;
+	return ret < 0 ? ret : ret * AARCH64_INSN_SIZE;
+}
 
-	ctx.image = image;
-	ctx.idx = 0;
+int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
+				void *image_end, const struct btf_func_model *m,
+				u32 flags, struct bpf_tramp_links *tlinks,
+				void *func_addr)
+{
+	int ret, nregs;
+	struct jit_ctx ctx = {
+		.image = image,
+		.idx = 0,
+	};
+
+	nregs = btf_func_model_nregs(m);
+	/* the first 8 registers are used for arguments */
+	if (nregs > 8)
+		return -ENOTSUPP;
 
 	jit_fill_hole(image, (unsigned int)(image_end - image));
-	ret = prepare_trampoline(&ctx, im, tlinks, orig_call, nregs, flags);
+	ret = prepare_trampoline(&ctx, im, tlinks, func_addr, nregs, flags);
 
 	if (ret > 0 && validate_code(&ctx) < 0)
 		ret = -EINVAL;
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
index b98c38288a9d..b912b1409fc0 100644
--- a/arch/arm64/tools/cpucaps
+++ b/arch/arm64/tools/cpucaps
@@ -37,10 +37,10 @@ HAS_GIC_PRIO_MASKING
 HAS_GIC_PRIO_RELAXED_SYNC
 HAS_HCX
 HAS_LDAPR
+HAS_LPA2
 HAS_LSE_ATOMICS
 HAS_MOPS
 HAS_NESTED_VIRT
-HAS_NO_HW_PREFETCH
 HAS_PAN
 HAS_S1PIE
 HAS_RAS_EXTN
@@ -84,7 +84,6 @@ WORKAROUND_2077057
 WORKAROUND_2457168
 WORKAROUND_2645198
 WORKAROUND_2658417
-WORKAROUND_2966298
 WORKAROUND_AMPERE_AC03_CPU_38
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
@@ -100,3 +99,4 @@ WORKAROUND_NVIDIA_CARMEL_CNP
 WORKAROUND_QCOM_FALKOR_E1003
 WORKAROUND_REPEAT_TLBI
 WORKAROUND_SPECULATIVE_AT
+WORKAROUND_SPECULATIVE_UNPRIV_LOAD
diff --git a/arch/arm64/tools/sysreg b/arch/arm64/tools/sysreg
index 96cbeeab4eec..4c9b67934367 100644
--- a/arch/arm64/tools/sysreg
+++ b/arch/arm64/tools/sysreg
@@ -1002,6 +1002,27 @@ UnsignedEnum	3:0	BT
 EndEnum
 EndSysreg
 
+Sysreg	ID_AA64PFR2_EL1	3	0	0	4	2
+Res0	63:36
+UnsignedEnum	35:32	FPMR
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	31:12
+UnsignedEnum	11:8	MTEFAR
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	MTESTOREONLY
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	MTEPERM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
 Sysreg	ID_AA64ZFR0_EL1	3	0	0	4	4
 Res0	63:60
 UnsignedEnum	59:56	F64MM
@@ -1058,7 +1079,11 @@ UnsignedEnum	63	FA64
 	0b0	NI
 	0b1	IMP
 EndEnum
-Res0	62:60
+Res0	62:61
+UnsignedEnum	60	LUTv2
+	0b0	NI
+	0b1	IMP
+EndEnum
 UnsignedEnum	59:56	SMEver
 	0b0000	SME
 	0b0001	SME2
@@ -1086,7 +1111,14 @@ UnsignedEnum	42	F16F16
 	0b0	NI
 	0b1	IMP
 EndEnum
-Res0	41:40
+UnsignedEnum	41	F8F16
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	40	F8F32
+	0b0	NI
+	0b1	IMP
+EndEnum
 UnsignedEnum	39:36	I8I32
 	0b0000	NI
 	0b1111	IMP
@@ -1107,7 +1139,49 @@ UnsignedEnum	32	F32F32
 	0b0	NI
 	0b1	IMP
 EndEnum
-Res0	31:0
+Res0	31
+UnsignedEnum	30	SF8FMA
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	29	SF8DP4
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	28	SF8DP2
+	0b0	NI
+	0b1	IMP
+EndEnum
+Res0	27:0
+EndSysreg
+
+Sysreg	ID_AA64FPFR0_EL1	3	0	0	4	7
+Res0	63:32
+UnsignedEnum	31	F8CVT
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	30	F8FMA
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	29	F8DP4
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	28	F8DP2
+	0b0	NI
+	0b1	IMP
+EndEnum
+Res0	27:2
+UnsignedEnum	1	F8E4M3
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	0	F8E5M2
+	0b0	NI
+	0b1	IMP
+EndEnum
 EndSysreg
 
 Sysreg	ID_AA64DFR0_EL1	3	0	0	5	0
@@ -1115,7 +1189,10 @@ Enum	63:60	HPMN0
 	0b0000	UNPREDICTABLE
 	0b0001	DEF
 EndEnum
-Res0	59:56
+UnsignedEnum	59:56	ExtTrcBuff
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 UnsignedEnum	55:52	BRBE
 	0b0000	NI
 	0b0001	IMP
@@ -1327,6 +1404,7 @@ UnsignedEnum	11:8	API
 	0b0011	PAuth2
 	0b0100	FPAC
 	0b0101	FPACCOMBINE
+	0b0110	PAuth_LR
 EndEnum
 UnsignedEnum	7:4	APA
 	0b0000	NI
@@ -1335,6 +1413,7 @@ UnsignedEnum	7:4	APA
 	0b0011	PAuth2
 	0b0100	FPAC
 	0b0101	FPACCOMBINE
+	0b0110	PAuth_LR
 EndEnum
 UnsignedEnum	3:0	DPB
 	0b0000	NI
@@ -1344,7 +1423,14 @@ EndEnum
 EndSysreg
 
 Sysreg	ID_AA64ISAR2_EL1	3	0	0	6	2
-Res0	63:56
+UnsignedEnum	63:60	ATS1A
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	59:56	LUT
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 UnsignedEnum	55:52	CSSC
 	0b0000	NI
 	0b0001	IMP
@@ -1353,7 +1439,19 @@ UnsignedEnum	51:48	RPRFM
 	0b0000	NI
 	0b0001	IMP
 EndEnum
-Res0	47:32
+Res0	47:44
+UnsignedEnum	43:40	PRFMSLC
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	39:36	SYSINSTR_128
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	35:32	SYSREG_128
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 UnsignedEnum	31:28	CLRBHB
 	0b0000	NI
 	0b0001	IMP
@@ -1377,6 +1475,7 @@ UnsignedEnum	15:12	APA3
 	0b0011	PAuth2
 	0b0100	FPAC
 	0b0101	FPACCOMBINE
+	0b0110	PAuth_LR
 EndEnum
 UnsignedEnum	11:8	GPA3
 	0b0000	NI
@@ -1392,6 +1491,23 @@ UnsignedEnum	3:0	WFxT
 EndEnum
 EndSysreg
 
+Sysreg	ID_AA64ISAR3_EL1	3	0	0	6	3
+Res0	63:12
+UnsignedEnum	11:8	TLBIW
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	FAMINMAX
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	CPA
+	0b0000	NI
+	0b0001	IMP
+	0b0010	CPA2
+EndEnum
+EndSysreg
+
 Sysreg	ID_AA64MMFR0_EL1	3	0	0	7	0
 UnsignedEnum	63:60	ECV
 	0b0000	NI
@@ -1680,7 +1796,8 @@ Field	63	TIDCP
 Field	62	SPINTMASK
 Field	61	NMI
 Field	60	EnTP2
-Res0	59:58
+Field	59	TCSO
+Field	58	TCSO0
 Field	57	EPAN
 Field	56	EnALS
 Field	55	EnAS0
@@ -1709,7 +1826,7 @@ EndEnum
 Field	37	ITFSB
 Field	36	BT1
 Field	35	BT0
-Res0	34
+Field	34	EnFPM
 Field	33	MSCEn
 Field	32	CMOW
 Field	31	EnIA
@@ -1747,7 +1864,8 @@ Field	0	M
 EndSysreg
 
 SysregFields	CPACR_ELx
-Res0	63:29
+Res0	63:30
+Field	29	E0POE
 Field	28	TTA
 Res0	27:26
 Field	25:24	SMEN
@@ -1790,6 +1908,41 @@ Sysreg	SMCR_EL1	3	0	1	2	6
 Fields	SMCR_ELx
 EndSysreg
 
+SysregFields	GCSCR_ELx
+Res0	63:10
+Field	9	STREn
+Field	8	PUSHMEn
+Res0	7
+Field	6	EXLOCKEN
+Field	5	RVCHKEN
+Res0	4:1
+Field	0	PCRSEL
+EndSysregFields
+
+Sysreg	GCSCR_EL1	3	0	2	5	0
+Fields	GCSCR_ELx
+EndSysreg
+
+SysregFields	GCSPR_ELx
+Field	63:3	PTR
+Res0	2:0
+EndSysregFields
+
+Sysreg	GCSPR_EL1	3	0	2	5	1
+Fields	GCSPR_ELx
+EndSysreg
+
+Sysreg	GCSCRE0_EL1	3	0	2	5	2
+Res0	63:11
+Field	10	nTR
+Field	9	STREn
+Field	8	PUSHMEn
+Res0	7:6
+Field	5	RVCHKEN
+Res0	4:1
+Field	0	PCRSEL
+EndSysreg
+
 Sysreg	ALLINT	3	0	4	3	0
 Res0	63:14
 Field	13	ALLINT
@@ -1933,10 +2086,18 @@ Sysreg	CONTEXTIDR_EL1	3	0	13	0	1
 Fields	CONTEXTIDR_ELx
 EndSysreg
 
+Sysreg	RCWSMASK_EL1	3	0	13	0	3
+Field	63:0	RCWSMASK
+EndSysreg
+
 Sysreg	TPIDR_EL1	3	0	13	0	4
 Field	63:0	ThreadID
 EndSysreg
 
+Sysreg	RCWMASK_EL1	3	0	13	0	6
+Field	63:0	RCWMASK
+EndSysreg
+
 Sysreg	SCXTNUM_EL1	3	0	13	0	7
 Field	63:0	SoftwareContextNumber
 EndSysreg
@@ -2004,9 +2165,10 @@ Field	27:24	CWG
 Field	23:20	ERG
 Field	19:16	DminLine
 Enum	15:14	L1Ip
-	0b00	VPIPT
+	# This was named as VPIPT in the ARM but now documented as reserved
+	0b00	RESERVED_VPIPT
 	# This is named as AIVIVT in the ARM but documented as reserved
-	0b01	RESERVED
+	0b01	RESERVED_AIVIVT
 	0b10	VIPT
 	0b11	PIPT
 EndEnum
@@ -2020,12 +2182,39 @@ Field	4	DZP
 Field	3:0	BS
 EndSysreg
 
+Sysreg	GCSPR_EL0	3	3	2	5	1
+Fields	GCSPR_ELx
+EndSysreg
+
 Sysreg	SVCR	3	3	4	2	2
 Res0	63:2
 Field	1	ZA
 Field	0	SM
 EndSysreg
 
+Sysreg	FPMR	3	3	4	4	2
+Res0	63:38
+Field	37:32	LSCALE2
+Field	31:24	NSCALE
+Res0	23
+Field	22:16	LSCALE
+Field	15	OSC
+Field	14	OSM
+Res0	13:9
+UnsignedEnum	8:6	F8D
+	0b000	E5M2
+	0b001	E4M3
+EndEnum
+UnsignedEnum	5:3	F8S2
+	0b000	E5M2
+	0b001	E4M3
+EndEnum
+UnsignedEnum	2:0	F8S1
+	0b000	E5M2
+	0b001	E4M3
+EndEnum
+EndSysreg
+
 SysregFields	HFGxTR_EL2
 Field	63	nAMAIR2_EL1
 Field	62	nMAIR2_EL1
@@ -2102,7 +2291,9 @@ Fields	HFGxTR_EL2
 EndSysreg
 
 Sysreg HFGITR_EL2	3	4	1	1	6
-Res0	63:61
+Res0	63
+Field	62	ATS1E1A
+Res0	61
 Field	60	COSPRCTX
 Field	59	nGCSEPP
 Field	58	nGCSSTR_EL1
@@ -2295,12 +2486,57 @@ Field	1	DBGBVRn_EL1
 Field	0	DBGBCRn_EL1
 EndSysreg
 
+Sysreg HAFGRTR_EL2	3	4	3	1	6
+Res0	63:50
+Field	49	AMEVTYPER115_EL0
+Field	48	AMEVCNTR115_EL0
+Field	47	AMEVTYPER114_EL0
+Field	46	AMEVCNTR114_EL0
+Field	45	AMEVTYPER113_EL0
+Field	44	AMEVCNTR113_EL0
+Field	43	AMEVTYPER112_EL0
+Field	42	AMEVCNTR112_EL0
+Field	41	AMEVTYPER111_EL0
+Field	40	AMEVCNTR111_EL0
+Field	39	AMEVTYPER110_EL0
+Field	38	AMEVCNTR110_EL0
+Field	37	AMEVTYPER19_EL0
+Field	36	AMEVCNTR19_EL0
+Field	35	AMEVTYPER18_EL0
+Field	34	AMEVCNTR18_EL0
+Field	33	AMEVTYPER17_EL0
+Field	32	AMEVCNTR17_EL0
+Field	31	AMEVTYPER16_EL0
+Field	30	AMEVCNTR16_EL0
+Field	29	AMEVTYPER15_EL0
+Field	28	AMEVCNTR15_EL0
+Field	27	AMEVTYPER14_EL0
+Field	26	AMEVCNTR14_EL0
+Field	25	AMEVTYPER13_EL0
+Field	24	AMEVCNTR13_EL0
+Field	23	AMEVTYPER12_EL0
+Field	22	AMEVCNTR12_EL0
+Field	21	AMEVTYPER11_EL0
+Field	20	AMEVCNTR11_EL0
+Field	19	AMEVTYPER10_EL0
+Field	18	AMEVCNTR10_EL0
+Field	17	AMCNTEN1
+Res0	16:5
+Field	4	AMEVCNTR03_EL0
+Field	3	AMEVCNTR02_EL0
+Field	2	AMEVCNTR01_EL0
+Field	1	AMEVCNTR00_EL0
+Field	0	AMCNTEN0
+EndSysreg
+
 Sysreg	ZCR_EL2	3	4	1	2	0
 Fields	ZCR_ELx
 EndSysreg
 
 Sysreg	HCRX_EL2	3	4	1	2	2
-Res0	63:23
+Res0	63:25
+Field	24	PACMEn
+Field	23	EnFPM
 Field	22	GCSEn
 Field	21	EnIDCP128
 Field	20	EnSDERR
@@ -2348,6 +2584,14 @@ Sysreg	SMCR_EL2	3	4	1	2	6
 Fields	SMCR_ELx
 EndSysreg
 
+Sysreg	GCSCR_EL2	3	4	2	5	0
+Fields	GCSCR_ELx
+EndSysreg
+
+Sysreg	GCSPR_EL2	3	4	2	5	1
+Fields	GCSPR_ELx
+EndSysreg
+
 Sysreg	DACR32_EL2	3	4	3	0	0
 Res0	63:32
 Field	31:30	D15
@@ -2407,6 +2651,14 @@ Sysreg	SMCR_EL12	3	5	1	2	6
 Fields	SMCR_ELx
 EndSysreg
 
+Sysreg	GCSCR_EL12	3	5	2	5	0
+Fields	GCSCR_ELx
+EndSysreg
+
+Sysreg	GCSPR_EL12	3	5	2	5	1
+Fields	GCSPR_ELx
+EndSysreg
+
 Sysreg	FAR_EL12	3	5	6	0	0
 Field	63:0	ADDR
 EndSysreg
@@ -2471,6 +2723,33 @@ Field	1	PIE
 Field	0	PnCH
 EndSysreg
 
+SysregFields MAIR2_ELx
+Field	63:56	Attr7
+Field	55:48	Attr6
+Field	47:40	Attr5
+Field	39:32	Attr4
+Field	31:24	Attr3
+Field	23:16	Attr2
+Field	15:8	Attr1
+Field	7:0	Attr0
+EndSysregFields
+
+Sysreg	MAIR2_EL1	3	0	10	2	1
+Fields	MAIR2_ELx
+EndSysreg
+
+Sysreg	MAIR2_EL2	3	4	10	1	1
+Fields	MAIR2_ELx
+EndSysreg
+
+Sysreg	AMAIR2_EL1	3	0	10	3	1
+Field	63:0	ImpDef
+EndSysreg
+
+Sysreg	AMAIR2_EL2	3	4	10	3	1
+Field	63:0	ImpDef
+EndSysreg
+
 SysregFields PIRx_ELx
 Field	63:60	Perm15
 Field	59:56	Perm14
@@ -2510,6 +2789,26 @@ Sysreg	PIR_EL2		3	4	10	2	3
 Fields	PIRx_ELx
 EndSysreg
 
+Sysreg	POR_EL0		3	3	10	2	4
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	POR_EL1		3	0	10	2	4
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	POR_EL12	3	5	10	2	4
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	S2POR_EL1	3	0	10	2	5
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	S2PIR_EL2	3	4	10	2	5
+Fields	PIRx_ELx
+EndSysreg
+
 Sysreg	LORSA_EL1	3	0	10	4	0
 Res0	63:52
 Field	51:16	SA
diff --git a/arch/csky/abiv1/inc/abi/cacheflush.h b/arch/csky/abiv1/inc/abi/cacheflush.h
index 908d8b0bc4fd..d011a81575d2 100644
--- a/arch/csky/abiv1/inc/abi/cacheflush.h
+++ b/arch/csky/abiv1/inc/abi/cacheflush.h
@@ -43,6 +43,7 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
  */
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
 #define flush_cache_vmap(start, end)		cache_wbinv_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		cache_wbinv_all()
 
 #define flush_icache_range(start, end)		cache_wbinv_range(start, end)
diff --git a/arch/csky/abiv2/inc/abi/cacheflush.h b/arch/csky/abiv2/inc/abi/cacheflush.h
index 40be16907267..6513ac5d2578 100644
--- a/arch/csky/abiv2/inc/abi/cacheflush.h
+++ b/arch/csky/abiv2/inc/abi/cacheflush.h
@@ -41,6 +41,7 @@ void flush_icache_mm_range(struct mm_struct *mm,
 void flush_icache_deferred(struct mm_struct *mm);
 
 #define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		do { } while (0)
 
 #define copy_to_user_page(vma, page, vaddr, dst, src, len) \
diff --git a/arch/csky/configs/defconfig b/arch/csky/configs/defconfig
index af722e4dfb47..ff559e5162aa 100644
--- a/arch/csky/configs/defconfig
+++ b/arch/csky/configs/defconfig
@@ -34,7 +34,8 @@ CONFIG_GENERIC_PHY=y
 CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA=y
-CONFIG_FSCACHE=m
+CONFIG_NETFS_SUPPORT=m
+CONFIG_FSCACHE=y
 CONFIG_FSCACHE_STATS=y
 CONFIG_CACHEFILES=m
 CONFIG_MSDOS_FS=y
diff --git a/arch/csky/include/asm/ftrace.h b/arch/csky/include/asm/ftrace.h
index 9b86341731b6..fd215c38ef27 100644
--- a/arch/csky/include/asm/ftrace.h
+++ b/arch/csky/include/asm/ftrace.h
@@ -26,5 +26,9 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr)
 
 struct dyn_arch_ftrace {
 };
+
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
+			   unsigned long frame_pointer);
+
 #endif /* !__ASSEMBLY__ */
 #endif /* __ASM_CSKY_FTRACE_H */
diff --git a/arch/csky/include/asm/irq_work.h b/arch/csky/include/asm/irq_work.h
index 33aaf39d6f94..d39fcc1f5395 100644
--- a/arch/csky/include/asm/irq_work.h
+++ b/arch/csky/include/asm/irq_work.h
@@ -7,5 +7,5 @@ static inline bool arch_irq_work_has_interrupt(void)
 {
 	return true;
 }
-extern void arch_irq_work_raise(void);
+
 #endif /* __ASM_CSKY_IRQ_WORK_H */
diff --git a/arch/csky/include/asm/jump_label.h b/arch/csky/include/asm/jump_label.h
index d488ba6084bc..ef2e37a10a0f 100644
--- a/arch/csky/include/asm/jump_label.h
+++ b/arch/csky/include/asm/jump_label.h
@@ -12,7 +12,7 @@
 static __always_inline bool arch_static_branch(struct static_key *key,
 					       bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	nop32					\n"
 		"	.pushsection	__jump_table, \"aw\"	\n"
 		"	.align		2			\n"
@@ -29,7 +29,7 @@ label:
 static __always_inline bool arch_static_branch_jump(struct static_key *key,
 						    bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	bsr32		%l[label]		\n"
 		"	.pushsection	__jump_table, \"aw\"	\n"
 		"	.align		2			\n"
@@ -43,5 +43,10 @@ label:
 	return true;
 }
 
+enum jump_label_type;
+void arch_jump_label_transform_static(struct jump_entry *entry,
+				      enum jump_label_type type);
+#define arch_jump_label_transform_static arch_jump_label_transform_static
+
 #endif  /* __ASSEMBLY__ */
 #endif	/* __ASM_CSKY_JUMP_LABEL_H */
diff --git a/arch/csky/include/asm/traps.h b/arch/csky/include/asm/traps.h
index 732c4aaa2e26..6bbbbe43165f 100644
--- a/arch/csky/include/asm/traps.h
+++ b/arch/csky/include/asm/traps.h
@@ -55,6 +55,6 @@ asmlinkage void trap_c(struct pt_regs *regs);
 asmlinkage void do_notify_resume(struct pt_regs *regs,
 			unsigned long thread_info_flags);
 
-void trap_init(void);
+asmlinkage void do_page_fault(struct pt_regs *regs);
 
 #endif /* __ASM_CSKY_TRAPS_H */
diff --git a/arch/csky/kernel/traps.c b/arch/csky/kernel/traps.c
index 6e426fba0119..c2246b07cc9c 100644
--- a/arch/csky/kernel/traps.c
+++ b/arch/csky/kernel/traps.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
 
+#include <linux/cpu.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/kernel.h>
diff --git a/arch/csky/kernel/vdso/vgettimeofday.c b/arch/csky/kernel/vdso/vgettimeofday.c
index c4831145eed5..55af30e83752 100644
--- a/arch/csky/kernel/vdso/vgettimeofday.c
+++ b/arch/csky/kernel/vdso/vgettimeofday.c
@@ -2,36 +2,27 @@
 
 #include <linux/time.h>
 #include <linux/types.h>
+#include <vdso/gettime.h>
 
 extern
 int __vdso_clock_gettime(clockid_t clock,
-			 struct old_timespec32 *ts);
-int __vdso_clock_gettime(clockid_t clock,
 			 struct old_timespec32 *ts)
 {
 	return __cvdso_clock_gettime32(clock, ts);
 }
 
 int __vdso_clock_gettime64(clockid_t clock,
-			   struct __kernel_timespec *ts);
-int __vdso_clock_gettime64(clockid_t clock,
 			   struct __kernel_timespec *ts)
 {
 	return __cvdso_clock_gettime(clock, ts);
 }
 
-extern
-int __vdso_gettimeofday(struct __kernel_old_timeval *tv,
-			struct timezone *tz);
 int __vdso_gettimeofday(struct __kernel_old_timeval *tv,
 			struct timezone *tz)
 {
 	return __cvdso_gettimeofday(tv, tz);
 }
 
-extern
-int __vdso_clock_getres(clockid_t clock_id,
-			struct old_timespec32 *res);
 int __vdso_clock_getres(clockid_t clock_id,
 			struct old_timespec32 *res)
 {
diff --git a/arch/hexagon/include/asm/io.h b/arch/hexagon/include/asm/io.h
index e2b308e32a37..522d321ea85a 100644
--- a/arch/hexagon/include/asm/io.h
+++ b/arch/hexagon/include/asm/io.h
@@ -59,12 +59,6 @@ static inline void *phys_to_virt(unsigned long address)
 }
 
 /*
- * convert a physical pointer to a virtual kernel pointer for
- * /dev/mem access.
- */
-#define xlate_dev_mem_ptr(p)    __va(p)
-
-/*
  * IO port access primitives.  Hexagon doesn't have special IO access
  * instructions; all I/O is memory mapped.
  *
@@ -174,9 +168,6 @@ static inline void writel(u32 data, volatile void __iomem *addr)
 #define _PAGE_IOREMAP (_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
 		       (__HEXAGON_C_DEV << 6))
 
-#define ioremap_uc(addr, size) ioremap((addr), (size))
-
-
 #define __raw_writel writel
 
 static inline void memcpy_fromio(void *dst, const volatile void __iomem *src,
diff --git a/arch/hexagon/include/asm/irq.h b/arch/hexagon/include/asm/irq.h
index 1f7f1292f701..a60d26754caa 100644
--- a/arch/hexagon/include/asm/irq.h
+++ b/arch/hexagon/include/asm/irq.h
@@ -20,4 +20,7 @@
 
 #include <asm-generic/irq.h>
 
+struct pt_regs;
+void arch_do_IRQ(struct pt_regs *);
+
 #endif
diff --git a/arch/hexagon/include/asm/page.h b/arch/hexagon/include/asm/page.h
index 9c03b9965f07..10f1bc07423c 100644
--- a/arch/hexagon/include/asm/page.h
+++ b/arch/hexagon/include/asm/page.h
@@ -78,6 +78,9 @@ typedef struct page *pgtable_t;
 #define __pgd(x)       ((pgd_t) { (x) })
 #define __pgprot(x)    ((pgprot_t) { (x) })
 
+/* Needed for PAGE_OFFSET used in the macro right below */
+#include <asm/mem-layout.h>
+
 /*
  * We need a __pa and a __va routine for kernel space.
  * MIPS says they're only used during mem_init.
@@ -125,8 +128,16 @@ static inline void clear_page(void *page)
  */
 #define page_to_phys(page)      (page_to_pfn(page) << PAGE_SHIFT)
 
-#define virt_to_pfn(kaddr)      (__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn)        __va((pfn) << PAGE_SHIFT)
+static inline unsigned long virt_to_pfn(const void *kaddr)
+{
+	return __pa(kaddr) >> PAGE_SHIFT;
+}
+
+static inline void *pfn_to_virt(unsigned long pfn)
+{
+	return (void *)((unsigned long)__va(pfn) << PAGE_SHIFT);
+}
+
 
 #define page_to_virt(page)	__va(page_to_phys(page))
 
diff --git a/arch/hexagon/include/uapi/asm/user.h b/arch/hexagon/include/uapi/asm/user.h
index 7327ec59b22f..abae6a4b5813 100644
--- a/arch/hexagon/include/uapi/asm/user.h
+++ b/arch/hexagon/include/uapi/asm/user.h
@@ -56,15 +56,10 @@ struct user_regs_struct {
 	unsigned long pc;
 	unsigned long cause;
 	unsigned long badva;
-#if CONFIG_HEXAGON_ARCH_VERSION < 4
-	unsigned long pad1;  /* pad out to 48 words total */
-	unsigned long pad2;  /* pad out to 48 words total */
-	unsigned long pad3;  /* pad out to 48 words total */
-#else
+	/* cs0 and cs1 are only available with HEXAGON_ARCH_VERSION >= 4 */
 	unsigned long cs0;
 	unsigned long cs1;
 	unsigned long pad1;  /* pad out to 48 words total */
-#endif
 };
 
 #endif
diff --git a/arch/hexagon/kernel/process.c b/arch/hexagon/kernel/process.c
index dd7f74ea2c20..2a77bfd75694 100644
--- a/arch/hexagon/kernel/process.c
+++ b/arch/hexagon/kernel/process.c
@@ -5,6 +5,7 @@
  * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
  */
 
+#include <linux/cpu.h>
 #include <linux/sched.h>
 #include <linux/sched/debug.h>
 #include <linux/sched/task.h>
@@ -152,6 +153,7 @@ unsigned long __get_wchan(struct task_struct *p)
  * Returns 0 if there's no need to re-check for more work.
  */
 
+int do_work_pending(struct pt_regs *regs, u32 thread_info_flags);
 int do_work_pending(struct pt_regs *regs, u32 thread_info_flags)
 {
 	if (!(thread_info_flags & _TIF_WORK_MASK)) {
diff --git a/arch/hexagon/kernel/ptrace.c b/arch/hexagon/kernel/ptrace.c
index 125f19995b76..905b06790ab7 100644
--- a/arch/hexagon/kernel/ptrace.c
+++ b/arch/hexagon/kernel/ptrace.c
@@ -74,7 +74,7 @@ static int genregs_set(struct task_struct *target,
 		   unsigned int pos, unsigned int count,
 		   const void *kbuf, const void __user *ubuf)
 {
-	int ret;
+	int ret, ignore_offset;
 	unsigned long bucket;
 	struct pt_regs *regs = task_pt_regs(target);
 
@@ -111,12 +111,15 @@ static int genregs_set(struct task_struct *target,
 #if CONFIG_HEXAGON_ARCH_VERSION >=4
 	INEXT(&regs->cs0, cs0);
 	INEXT(&regs->cs1, cs1);
+	ignore_offset = offsetof(struct user_regs_struct, pad1);
+#else
+	ignore_offset = offsetof(struct user_regs_struct, cs0);
 #endif
 
 	/* Ignore the rest, if needed */
 	if (!ret)
 		user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-			offsetof(struct user_regs_struct, pad1), -1);
+					  ignore_offset, -1);
 	else
 		return ret;
 
diff --git a/arch/hexagon/kernel/reset.c b/arch/hexagon/kernel/reset.c
index da36114d928f..efd70a8d2526 100644
--- a/arch/hexagon/kernel/reset.c
+++ b/arch/hexagon/kernel/reset.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  */
 
+#include <linux/reboot.h>
 #include <linux/smp.h>
 #include <asm/hexagon_vm.h>
 
diff --git a/arch/hexagon/kernel/signal.c b/arch/hexagon/kernel/signal.c
index bcba31e9e0ae..d301f4621553 100644
--- a/arch/hexagon/kernel/signal.c
+++ b/arch/hexagon/kernel/signal.c
@@ -220,7 +220,7 @@ no_restart:
  * Architecture-specific wrappers for signal-related system calls
  */
 
-asmlinkage int sys_rt_sigreturn(void)
+SYSCALL_DEFINE0(rt_sigreturn)
 {
 	struct pt_regs *regs = current_pt_regs();
 	struct rt_sigframe __user *frame;
diff --git a/arch/hexagon/kernel/smp.c b/arch/hexagon/kernel/smp.c
index 4e8bee25b8c6..608884bc3396 100644
--- a/arch/hexagon/kernel/smp.c
+++ b/arch/hexagon/kernel/smp.c
@@ -79,7 +79,7 @@ void smp_vm_unmask_irq(void *info)
  * Specifically, first arg is irq, second is the irq_desc.
  */
 
-irqreturn_t handle_ipi(int irq, void *desc)
+static irqreturn_t handle_ipi(int irq, void *desc)
 {
 	int cpu = smp_processor_id();
 	struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
@@ -124,7 +124,7 @@ void __init smp_prepare_boot_cpu(void)
  * to point to current thread info
  */
 
-void start_secondary(void)
+static void start_secondary(void)
 {
 	unsigned long thread_ptr;
 	unsigned int cpu, irq;
diff --git a/arch/hexagon/kernel/time.c b/arch/hexagon/kernel/time.c
index febc95714d75..f0f207e2a694 100644
--- a/arch/hexagon/kernel/time.c
+++ b/arch/hexagon/kernel/time.c
@@ -17,7 +17,9 @@
 #include <linux/of_irq.h>
 #include <linux/module.h>
 
+#include <asm/delay.h>
 #include <asm/hexagon_vm.h>
+#include <asm/time.h>
 
 #define TIMER_ENABLE		BIT(0)
 
@@ -160,7 +162,7 @@ static irqreturn_t timer_interrupt(int irq, void *devid)
  * This runs just before the delay loop is calibrated, and
  * is used for delay calibration.
  */
-void __init time_init_deferred(void)
+static void __init time_init_deferred(void)
 {
 	struct resource *resource = NULL;
 	struct clock_event_device *ce_dev = &hexagon_clockevent_dev;
diff --git a/arch/hexagon/kernel/traps.c b/arch/hexagon/kernel/traps.c
index 6447763ce5a9..75e062722d28 100644
--- a/arch/hexagon/kernel/traps.c
+++ b/arch/hexagon/kernel/traps.c
@@ -281,6 +281,7 @@ static void cache_error(struct pt_regs *regs)
 /*
  * General exception handler
  */
+void do_genex(struct pt_regs *regs);
 void do_genex(struct pt_regs *regs)
 {
 	/*
@@ -331,13 +332,7 @@ void do_genex(struct pt_regs *regs)
 	}
 }
 
-/* Indirect system call dispatch */
-long sys_syscall(void)
-{
-	printk(KERN_ERR "sys_syscall invoked!\n");
-	return -ENOSYS;
-}
-
+void do_trap0(struct pt_regs *regs);
 void do_trap0(struct pt_regs *regs)
 {
 	syscall_fn syscall;
@@ -415,6 +410,7 @@ void do_trap0(struct pt_regs *regs)
 /*
  * Machine check exception handler
  */
+void do_machcheck(struct pt_regs *regs);
 void do_machcheck(struct pt_regs *regs)
 {
 	/* Halt and catch fire */
@@ -425,6 +421,7 @@ void do_machcheck(struct pt_regs *regs)
  * Treat this like the old 0xdb trap.
  */
 
+void do_debug_exception(struct pt_regs *regs);
 void do_debug_exception(struct pt_regs *regs)
 {
 	regs->hvmer.vmest &= ~HVM_VMEST_CAUSE_MSK;
diff --git a/arch/hexagon/kernel/vdso.c b/arch/hexagon/kernel/vdso.c
index b70970ac809f..2e4872d62124 100644
--- a/arch/hexagon/kernel/vdso.c
+++ b/arch/hexagon/kernel/vdso.c
@@ -10,6 +10,7 @@
 #include <linux/vmalloc.h>
 #include <linux/binfmts.h>
 
+#include <asm/elf.h>
 #include <asm/vdso.h>
 
 static struct page *vdso_page;
diff --git a/arch/hexagon/kernel/vm_events.c b/arch/hexagon/kernel/vm_events.c
index 59ef72e4a4e5..2b881a89b206 100644
--- a/arch/hexagon/kernel/vm_events.c
+++ b/arch/hexagon/kernel/vm_events.c
@@ -73,13 +73,6 @@ void show_regs(struct pt_regs *regs)
 		pt_psp(regs), pt_badva(regs), ints_enabled(regs));
 }
 
-void dummy_handler(struct pt_regs *regs)
-{
-	unsigned int elr = pt_elr(regs);
-	printk(KERN_ERR "Unimplemented handler; ELR=0x%08x\n", elr);
-}
-
-
 void arch_do_IRQ(struct pt_regs *regs)
 {
 	int irq = pt_cause(regs);
diff --git a/arch/hexagon/mm/init.c b/arch/hexagon/mm/init.c
index 146115c9de61..3458f39ca2ac 100644
--- a/arch/hexagon/mm/init.c
+++ b/arch/hexagon/mm/init.c
@@ -12,6 +12,7 @@
 #include <linux/highmem.h>
 #include <asm/tlb.h>
 #include <asm/sections.h>
+#include <asm/setup.h>
 #include <asm/vm_mmu.h>
 
 /*
@@ -86,7 +87,7 @@ void sync_icache_dcache(pte_t pte)
  * In this mode, we only have one pg_data_t
  * structure: contig_mem_data.
  */
-void __init paging_init(void)
+static void __init paging_init(void)
 {
 	unsigned long max_zone_pfn[MAX_NR_ZONES] = {0, };
 
diff --git a/arch/hexagon/mm/uaccess.c b/arch/hexagon/mm/uaccess.c
index 650bca92f0b7..3204e9ba6d6f 100644
--- a/arch/hexagon/mm/uaccess.c
+++ b/arch/hexagon/mm/uaccess.c
@@ -35,11 +35,3 @@ __kernel_size_t __clear_user_hexagon(void __user *dest, unsigned long count)
 
 	return count;
 }
-
-unsigned long clear_user_hexagon(void __user *dest, unsigned long count)
-{
-	if (!access_ok(dest, count))
-		return count;
-	else
-		return __clear_user_hexagon(dest, count);
-}
diff --git a/arch/hexagon/mm/vm_fault.c b/arch/hexagon/mm/vm_fault.c
index 7295ea3f8cc8..3771fb453898 100644
--- a/arch/hexagon/mm/vm_fault.c
+++ b/arch/hexagon/mm/vm_fault.c
@@ -12,6 +12,7 @@
  */
 
 #include <asm/traps.h>
+#include <asm/vm_fault.h>
 #include <linux/uaccess.h>
 #include <linux/mm.h>
 #include <linux/sched/signal.h>
@@ -33,7 +34,7 @@
 /*
  * Canonical page fault handler
  */
-void do_page_fault(unsigned long address, long cause, struct pt_regs *regs)
+static void do_page_fault(unsigned long address, long cause, struct pt_regs *regs)
 {
 	struct vm_area_struct *vma;
 	struct mm_struct *mm = current->mm;
diff --git a/arch/hexagon/mm/vm_tlb.c b/arch/hexagon/mm/vm_tlb.c
index 53482f2a9ff9..8b6405e2234b 100644
--- a/arch/hexagon/mm/vm_tlb.c
+++ b/arch/hexagon/mm/vm_tlb.c
@@ -14,6 +14,7 @@
 #include <linux/sched.h>
 #include <asm/page.h>
 #include <asm/hexagon_vm.h>
+#include <asm/tlbflush.h>
 
 /*
  * Initial VM implementation has only one map active at a time, with
diff --git a/arch/loongarch/Kbuild b/arch/loongarch/Kbuild
index beb8499dd8ed..bfa21465d83a 100644
--- a/arch/loongarch/Kbuild
+++ b/arch/loongarch/Kbuild
@@ -4,6 +4,7 @@ obj-y += net/
 obj-y += vdso/
 
 obj-$(CONFIG_KVM) += kvm/
+obj-$(CONFIG_BUILTIN_DTB) += boot/dts/
 
 # for cleaning
 subdir- += boot
diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
index ee123820a476..929f68926b34 100644
--- a/arch/loongarch/Kconfig
+++ b/arch/loongarch/Kconfig
@@ -5,12 +5,14 @@ config LOONGARCH
 	select ACPI
 	select ACPI_GENERIC_GSI if ACPI
 	select ACPI_MCFG if ACPI
+	select ACPI_HOTPLUG_CPU if ACPI_PROCESSOR && HOTPLUG_CPU
 	select ACPI_PPTT if ACPI
 	select ACPI_SYSTEM_POWER_STATES_SUPPORT	if ACPI
 	select ARCH_BINFMT_ELF_STATE
 	select ARCH_DISABLE_KASAN_INLINE
 	select ARCH_ENABLE_MEMORY_HOTPLUG
 	select ARCH_ENABLE_MEMORY_HOTREMOVE
+	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
 	select ARCH_HAS_ACPI_TABLE_UPGRADE	if ACPI
 	select ARCH_HAS_CPU_FINALIZE_INIT
 	select ARCH_HAS_FORTIFY_SOURCE
@@ -71,6 +73,7 @@ config LOONGARCH
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE
 	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_DEVICES
 	select GENERIC_ENTRY
 	select GENERIC_GETTIMEOFDAY
 	select GENERIC_IOREMAP if !ARCH_IOREMAP
@@ -97,6 +100,7 @@ config LOONGARCH
 	select HAVE_ARCH_KFENCE
 	select HAVE_ARCH_KGDB if PERF_EVENTS
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
+	select HAVE_ARCH_SECCOMP
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
@@ -140,6 +144,7 @@ config LOONGARCH
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RETHOOK
 	select HAVE_RSEQ
+	select HAVE_RUST
 	select HAVE_SAMPLE_FTRACE_DIRECT
 	select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
 	select HAVE_SETUP_PER_CPU_AREA if NUMA
@@ -374,6 +379,24 @@ config CMDLINE_FORCE
 
 endchoice
 
+config BUILTIN_DTB
+	bool "Enable built-in dtb in kernel"
+	depends on OF
+	help
+	  Some existing systems do not provide a canonical device tree to
+	  the kernel at boot time. Let's provide a device tree table in the
+	  kernel, keyed by the dts filename, containing the relevant DTBs.
+
+	  Built-in DTBs are generic enough and can be used as references.
+
+config BUILTIN_DTB_NAME
+	string "Source file for built-in dtb"
+	depends on BUILTIN_DTB
+	help
+	  Base name (without suffix, relative to arch/loongarch/boot/dts/)
+	  for the DTS file that will be used to produce the DTB linked into
+	  the kernel.
+
 config DMI
 	bool "Enable DMI scanning"
 	select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
@@ -575,6 +598,9 @@ config ARCH_SELECTS_CRASH_DUMP
 	depends on CRASH_DUMP
 	select RELOCATABLE
 
+config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION
+	def_bool CRASH_CORE
+
 config RELOCATABLE
 	bool "Relocatable kernel"
 	help
@@ -608,23 +634,6 @@ config RANDOMIZE_BASE_MAX_OFFSET
 
 	  This is limited by the size of the lower address memory, 256MB.
 
-config SECCOMP
-	bool "Enable seccomp to safely compute untrusted bytecode"
-	depends on PROC_FS
-	default y
-	help
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via /proc/<pid>/seccomp, it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-	  If unsure, say Y. Only embedded should say N here.
-
 endmenu
 
 config ARCH_SELECT_MEMORY_MODEL
@@ -643,10 +652,6 @@ config ARCH_SPARSEMEM_ENABLE
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/mm/numa.rst> for more.
 
-config ARCH_ENABLE_THP_MIGRATION
-	def_bool y
-	depends on TRANSPARENT_HUGEPAGE
-
 config ARCH_MEMORY_PROBE
 	def_bool y
 	depends on MEMORY_HOTPLUG
diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
index 4ba8d67ddb09..983aa2b1629a 100644
--- a/arch/loongarch/Makefile
+++ b/arch/loongarch/Makefile
@@ -6,6 +6,7 @@
 boot	:= arch/loongarch/boot
 
 KBUILD_DEFCONFIG := loongson3_defconfig
+KBUILD_DTBS      := dtbs
 
 image-name-y			:= vmlinux
 image-name-$(CONFIG_EFI_ZBOOT)	:= vmlinuz
@@ -81,8 +82,11 @@ KBUILD_AFLAGS_MODULE		+= -Wa,-mla-global-with-abs
 KBUILD_CFLAGS_MODULE		+= -fplt -Wa,-mla-global-with-abs,-mla-local-with-abs
 endif
 
+KBUILD_RUSTFLAGS_MODULE		+= -Crelocation-model=pic
+
 ifeq ($(CONFIG_RELOCATABLE),y)
 KBUILD_CFLAGS_KERNEL		+= -fPIE
+KBUILD_RUSTFLAGS_KERNEL		+= -Crelocation-model=pie
 LDFLAGS_vmlinux			+= -static -pie --no-dynamic-linker -z notext $(call ld-option, --apply-dynamic-relocs)
 endif
 
@@ -141,7 +145,7 @@ endif
 
 vdso-install-y += arch/loongarch/vdso/vdso.so.dbg
 
-all:	$(notdir $(KBUILD_IMAGE))
+all:	$(notdir $(KBUILD_IMAGE)) $(KBUILD_DTBS)
 
 vmlinuz.efi: vmlinux.efi
 
diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile
index 5f1f55e911ad..747d0c3f6389 100644
--- a/arch/loongarch/boot/dts/Makefile
+++ b/arch/loongarch/boot/dts/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
-dtstree	:= $(srctree)/$(src)
 
-dtb-y := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
+dtb-y = loongson-2k0500-ref.dtb loongson-2k1000-ref.dtb loongson-2k2000-ref.dtb
+
+obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME))
diff --git a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
new file mode 100644
index 000000000000..8aefb0c12672
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k0500.dtsi"
+
+/ {
+	compatible = "loongson,ls2k0500-ref", "loongson,ls2k0500";
+	model = "Loongson-2K0500 Reference Board";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@200000 {
+		device_type = "memory";
+		reg = <0x0 0x00200000 0x0 0x0ee00000>,
+		      <0x0 0x90000000 0x0 0x60000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x2000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	bus_id = <0x0>;
+};
+
+&gmac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	bus_id = <0x1>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	eeprom@57 {
+		compatible = "atmel,24c16";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
diff --git a/arch/loongarch/boot/dts/loongson-2k0500.dtsi b/arch/loongarch/boot/dts/loongson-2k0500.dtsi
new file mode 100644
index 000000000000..444779c21034
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k0500.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "loongson,la264";
+			device_type = "cpu";
+			reg = <0x0>;
+			clocks = <&cpu_clk>;
+		};
+	};
+
+	cpu_clk: cpu-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "loongson,cpu-interrupt-controller";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+			 <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+			 <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>,
+			 <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+			 <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		isa@16400000 {
+			compatible = "isa";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			ranges = <1 0x0 0x0 0x16400000 0x4000>;
+		};
+
+		liointc0: interrupt-controller@1fe11400 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe11400 0x0 0x40>,
+			      <0x0 0x1fe11040 0x0 0x8>;
+			reg-names = "main", "isr0";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		liointc1: interrupt-controller@1fe11440 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe11440 0x0 0x40>,
+			      <0x0 0x1fe11048 0x0 0x8>;
+			reg-names = "main", "isr0";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <4>;
+			interrupt-names = "int2";
+
+			loongson,parent_int_map = <0x00000000>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0xffffffff>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		eiointc: interrupt-controller@1fe11600 {
+			compatible = "loongson,ls2k0500-eiointc";
+			reg = <0x0 0x1fe11600 0x0 0xea00>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+		};
+
+		gmac0: ethernet@1f020000 {
+			compatible = "snps,dwmac-3.70a";
+			reg = <0x0 0x1f020000 0x0 0x10000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac1: ethernet@1f030000 {
+			compatible = "snps,dwmac-3.70a";
+			reg = <0x0 0x1f030000 0x0 0x10000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		sata: sata@1f040000 {
+			compatible = "snps,spear-ahci";
+			reg = <0x0 0x1f040000 0x0 0x10000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <75>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1f050000 {
+			compatible = "generic-ehci";
+			reg = <0x0 0x1f050000 0x0 0x8000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <71>;
+			status = "disabled";
+		};
+
+		ohci0: usb@1f058000 {
+			compatible = "generic-ohci";
+			reg = <0x0 0x1f058000 0x0 0x8000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <72>;
+			status = "disabled";
+		};
+
+		uart0: serial@1ff40800 {
+			compatible = "ns16550a";
+			reg = <0x0 0x1ff40800 0x0 0x10>;
+			clock-frequency = <100000000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <2>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1ff48000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff48000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <14>;
+			status = "disabled";
+		};
+
+		i2c@1ff48800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff48800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <15>;
+			status = "disabled";
+		};
+
+		i2c@1ff49000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff49000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <16>;
+			status = "disabled";
+		};
+
+		i2c@1ff49800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff49800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <17>;
+			status = "disabled";
+		};
+
+		i2c@1ff4a000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff4a000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <18>;
+			status = "disabled";
+		};
+
+		i2c@1ff4a800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff4a800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <19>;
+			status = "disabled";
+		};
+
+		pmc: power-management@1ff6c000 {
+			compatible = "loongson,ls2k0500-pmc", "syscon";
+			reg = <0x0 0x1ff6c000 0x0 0x58>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <56>;
+			loongson,suspend-address = <0x0 0x1c000500>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x30>;
+				mask = <0x1>;
+			};
+
+			syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmc>;
+				offset = <0x14>;
+				mask = <0x3c00>;
+				value = <0x3c00>;
+			};
+		};
+
+		rtc0: rtc@1ff6c100 {
+			compatible = "loongson,ls2k0500-rtc", "loongson,ls7a-rtc";
+			reg = <0x0 0x1ff6c100 0x0 0x100>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <35>;
+			status = "disabled";
+		};
+
+		pcie@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			reg = <0x0 0x1a000000 0x0 0x02000000>,
+			      <0xfe 0x0 0x0 0x20000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0x5>;
+			ranges = <0x01000000 0x0 0x00004000 0x0 0x16404000 0x0 0x00004000>,
+				 <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
+
+			pcie@0,0 {
+				reg = <0x0000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&eiointc>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 81>;
+				ranges;
+			};
+
+			pcie@1,0 {
+				reg = <0x0800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&eiointc>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 82>;
+				ranges;
+			};
+		};
+	};
+};
diff --git a/arch/loongarch/boot/dts/loongson-2k1000-ref.dts b/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
new file mode 100644
index 000000000000..ed4d32434041
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k1000.dtsi"
+
+/ {
+	compatible = "loongson,ls2k1000-ref", "loongson,ls2k1000";
+	model = "Loongson-2K1000 Reference Board";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@200000 {
+		device_type = "memory";
+		reg = <0x0 0x00200000 0x0 0x06e00000>,
+		      <0x0 0x08000000 0x0 0x07000000>,
+		      <0x0 0x90000000 0x1 0xe0000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x2000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy1>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy1: ethernet-phy@1 {
+			reg = <16>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	pinctrl-0 = <&i2c0_pins_default>;
+	pinctrl-names = "default";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	eeprom@57 {
+		compatible = "atmel,24c16";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <100000000>;
+		reg = <0>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&clk {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&pctrl {
+	status = "okay";
+
+	sdio_pins_default: sdio-pins {
+		sdio-pinmux {
+			groups = "sdio";
+			function = "sdio";
+		};
+		sdio-det-pinmux {
+			groups = "pwm2";
+			function = "gpio";
+		};
+	};
+
+	pwm1_pins_default: pwm1-pins {
+		pinmux {
+			groups = "pwm1";
+			function = "pwm1";
+		};
+	};
+
+	pwm0_pins_default: pwm0-pins {
+		pinmux {
+			groups = "pwm0";
+			function = "pwm0";
+		};
+	};
+
+	i2c1_pins_default: i2c1-pins {
+		pinmux {
+			groups = "i2c1";
+			function = "i2c1";
+		};
+	};
+
+	i2c0_pins_default: i2c0-pins {
+		pinmux {
+			groups = "i2c0";
+			function = "i2c0";
+		};
+	};
+
+	nand_pins_default: nand-pins {
+		pinmux {
+			groups = "nand";
+			function = "nand";
+		};
+	};
+
+	hda_pins_default: hda-pins {
+		grp0-pinmux {
+			groups = "hda";
+			function = "hda";
+		};
+		grp1-pinmux {
+			groups = "i2s";
+			function = "gpio";
+		};
+	};
+};
diff --git a/arch/loongarch/boot/dts/loongson-2k1000.dtsi b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
new file mode 100644
index 000000000000..49a70f8c3cab
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "loongson,la264";
+			device_type = "cpu";
+			reg= <0x0>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "loongson,la264";
+			device_type = "cpu";
+			reg = <0x1>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
+		};
+	};
+
+	ref_100m: clock-ref-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "ref_100m";
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "loongson,cpu-interrupt-controller";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	/* i2c of the dvi eeprom edid */
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	/* i2c of the eeprom edid */
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		scl-gpios = <&gpio0 33 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio0 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tsensor 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <33000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <85000>;
+					hysteresis = <5000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+			 <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+			 <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>,
+			 <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+			 <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-coherent;
+
+		liointc0: interrupt-controller@1fe01400 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe01400 0x0 0x40>,
+			      <0x0 0x1fe01040 0x0 0x8>,
+			      <0x0 0x1fe01140 0x0 0x8>;
+			reg-names = "main", "isr0", "isr1";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		liointc1: interrupt-controller@1fe01440 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe01440 0x0 0x40>,
+			      <0x0 0x1fe01048 0x0 0x8>,
+			      <0x0 0x1fe01148 0x0 0x8>;
+			reg-names = "main", "isr0", "isr1";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+			interrupt-names = "int1";
+			loongson,parent_int_map = <0x00000000>, /* int0 */
+						  <0xffffffff>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		chipid@1fe00000 {
+			compatible = "loongson,ls2k-chipid";
+			reg = <0x0 0x1fe00000 0x0 0x30>;
+			little-endian;
+		};
+
+		pctrl: pinctrl@1fe00420 {
+			compatible = "loongson,ls2k-pinctrl";
+			reg = <0x0 0x1fe00420 0x0 0x18>;
+			status = "disabled";
+		};
+
+		clk: clock-controller@1fe00480 {
+			compatible = "loongson,ls2k-clk";
+			reg = <0x0 0x1fe00480 0x0 0x58>;
+			#clock-cells = <1>;
+			clocks = <&ref_100m>;
+			clock-names = "ref_100m";
+			status = "disabled";
+		};
+
+		gpio0: gpio@1fe00500 {
+			compatible = "loongson,ls2k-gpio";
+			reg = <0x0 0x1fe00500 0x0 0x38>;
+			ngpios = <64>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pctrl 0x0 0x0 15>,
+				      <&pctrl 16 16 15>,
+				      <&pctrl 32 32 10>,
+				      <&pctrl 44 44 20>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>,
+				     <29 IRQ_TYPE_LEVEL_HIGH>,
+				     <30 IRQ_TYPE_LEVEL_HIGH>,
+				     <30 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <>,
+				     <>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		tsensor: thermal-sensor@1fe01500 {
+			compatible = "loongson,ls2k1000-thermal";
+			reg = <0x0 0x1fe01500 0x0 0x30>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		dma-controller@1fe00c00 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c00 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe00c10 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c10 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe00c20 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c20 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe00c30 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c30 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe00c40 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c40 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		uart0: serial@1fe20000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x1fe20000 0x0 0x10>;
+			clock-frequency = <125000000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <0x0 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1fe21000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1fe21000 0x0 0x8>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@1fe21800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1fe21800 0x0 0x8>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pmc: power-management@1fe27000 {
+			compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon";
+			reg = <0x0 0x1fe27000 0x0 0x58>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			loongson,suspend-address = <0x0 0x1c000500>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x30>;
+				mask = <0x1>;
+			};
+
+			syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmc>;
+				offset = <0x14>;
+				mask = <0x3c00>;
+				value = <0x3c00>;
+			};
+		};
+
+		rtc0: rtc@1fe27800 {
+			compatible = "loongson,ls2k1000-rtc";
+			reg = <0x0 0x1fe27800 0x0 0x100>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		spi0: spi@1fff0220 {
+			compatible = "loongson,ls2k1000-spi";
+			reg = <0x0 0x1fff0220 0x0 0x10>;
+			clocks = <&clk LOONGSON2_BOOT_CLK>;
+			status = "disabled";
+		};
+
+		pcie@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			reg = <0x0 0x1a000000 0x0 0x02000000>,
+			      <0xfe 0x0 0x0 0x20000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0xff>;
+			ranges = <0x01000000 0x0 0x00008000 0x0 0x18008000 0x0 0x00008000>,
+				 <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
+
+			gmac0: ethernet@3,0 {
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				status = "disabled";
+			};
+
+			gmac1: ethernet@3,1 {
+				reg = <0x1900 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+					     <15 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				status = "disabled";
+			};
+
+			ehci0: usb@4,1 {
+				reg = <0x2100 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc1>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			ohci0: usb@4,2 {
+				reg = <0x2200 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc1>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			display@6,0 {
+				reg = <0x3000 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			hda@7,0 {
+				reg = <0x3800 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			sata: sata@8,0 {
+				reg = <0x4000 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 0x0 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@a,0 {
+				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@b,0 {
+				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@c,0 {
+				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@d,0 {
+				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@e,0 {
+				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+		};
+	};
+};
diff --git a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
new file mode 100644
index 000000000000..dca91caf895e
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k2000.dtsi"
+
+/ {
+	compatible = "loongson,ls2k2000-ref", "loongson,ls2k2000";
+	model = "Loongson-2K2000 Reference Board";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@200000 {
+		device_type = "memory";
+		reg = <0x0 0x00200000 0x0 0x0ee00000>,
+		      <0x0 0x90000000 0x0 0x70000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x2000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+};
diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
new file mode 100644
index 000000000000..a231949b5f55
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@1 {
+			compatible = "loongson,la364";
+			device_type = "cpu";
+			reg = <0x0>;
+			clocks = <&cpu_clk>;
+		};
+
+		cpu1: cpu@2 {
+			compatible = "loongson,la364";
+			device_type = "cpu";
+			reg = <0x1>;
+			clocks = <&cpu_clk>;
+		};
+	};
+
+	cpu_clk: cpu-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1400000000>;
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "loongson,cpu-interrupt-controller";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+			 <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+			 <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+			 <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		pmc: power-management@100d0000 {
+			compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon";
+			reg = <0x0 0x100d0000 0x0 0x58>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <47>;
+			loongson,suspend-address = <0x0 0x1c000500>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x30>;
+				mask = <0x1>;
+			};
+
+			syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmc>;
+				offset = <0x14>;
+				mask = <0x3c00>;
+				value = <0x3c00>;
+			};
+		};
+
+		liointc: interrupt-controller@1fe01400 {
+			compatible = "loongson,liointc-1.0";
+			reg = <0x0 0x1fe01400 0x0 0x64>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		eiointc: interrupt-controller@1fe01600 {
+			compatible = "loongson,ls2k2000-eiointc";
+			reg = <0x0 0x1fe01600 0x0 0xea00>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+		};
+
+		pic: interrupt-controller@10000000 {
+			compatible = "loongson,pch-pic-1.0";
+			reg = <0x0 0x10000000 0x0 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			loongson,pic-base-vec = <0>;
+			interrupt-parent = <&eiointc>;
+		};
+
+		msi: msi-controller@1fe01140 {
+			compatible = "loongson,pch-msi-1.0";
+			reg = <0x0 0x1fe01140 0x0 0x8>;
+			msi-controller;
+			loongson,msi-base-vec = <64>;
+			loongson,msi-num-vecs = <192>;
+			interrupt-parent = <&eiointc>;
+		};
+
+		rtc0: rtc@100d0100 {
+			compatible = "loongson,ls2k2000-rtc", "loongson,ls7a-rtc";
+			reg = <0x0 0x100d0100 0x0 0x100>;
+			interrupt-parent = <&pic>;
+			interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@1fe001e0 {
+			compatible = "ns16550a";
+			reg = <0x0 0x1fe001e0 0x0 0x10>;
+			clock-frequency = <100000000>;
+			interrupt-parent = <&liointc>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		pcie@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			reg = <0x0 0x1a000000 0x0 0x02000000>,
+			      <0xfe 0x0 0x0 0x20000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0xff>;
+			ranges = <0x01000000 0x0 0x00008000 0x0 0x18400000 0x0 0x00008000>,
+				 <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
+
+			gmac0: ethernet@3,0 {
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			gmac1: ethernet@3,1 {
+				reg = <0x1900 0x0 0x0 0x0 0x0>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			gmac2: ethernet@3,2 {
+				reg = <0x1a00 0x0 0x0 0x0 0x0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			xhci0: usb@4,0 {
+				reg = <0x2000 0x0 0x0 0x0 0x0>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			xhci1: usb@19,0 {
+				reg = <0xc800 0x0 0x0 0x0 0x0>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			display@6,1 {
+				reg = <0x3100 0x0 0x0 0x0 0x0>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			hda@7,0 {
+				reg = <0x3800 0x0 0x0 0x0 0x0>;
+				interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			sata: sata@8,0 {
+				reg = <0x4000 0x0 0x0 0x0 0x0>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 32 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@a,0 {
+				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 33 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@b,0 {
+				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 34 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@c,0 {
+				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 35 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@d,0 {
+				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 36 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@e,0 {
+				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 37 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@f,0 {
+				reg = <0x7800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 40 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@10,0 {
+				reg = <0x8000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 30 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+		};
+	};
+};
diff --git a/arch/loongarch/configs/loongson3_defconfig b/arch/loongarch/configs/loongson3_defconfig
index 33795e4a5bd6..f18c2ba871ef 100644
--- a/arch/loongarch/configs/loongson3_defconfig
+++ b/arch/loongarch/configs/loongson3_defconfig
@@ -6,6 +6,8 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BPF_SYSCALL=y
 CONFIG_BPF_JIT=y
 CONFIG_PREEMPT=y
+CONFIG_PREEMPT_DYNAMIC=y
+CONFIG_SCHED_CORE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
@@ -19,6 +21,7 @@ CONFIG_BLK_CGROUP=y
 CONFIG_CFS_BANDWIDTH=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_RDMA=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_HUGETLB=y
 CONFIG_CPUSETS=y
@@ -26,6 +29,7 @@ CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_PERF=y
 CONFIG_CGROUP_BPF=y
+CONFIG_CGROUP_MISC=y
 CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_CHECKPOINT_RESTORE=y
@@ -35,6 +39,8 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
 CONFIG_LOONGARCH=y
 CONFIG_64BIT=y
 CONFIG_MACH_LOONGSON64=y
@@ -44,13 +50,11 @@ CONFIG_DMI=y
 CONFIG_EFI=y
 CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
-CONFIG_NR_CPUS=64
+CONFIG_NR_CPUS=256
 CONFIG_NUMA=y
 CONFIG_CPU_HAS_FPU=y
 CONFIG_CPU_HAS_LSX=y
 CONFIG_CPU_HAS_LASX=y
-CONFIG_KEXEC=y
-CONFIG_CRASH_DUMP=y
 CONFIG_RANDOMIZE_BASE=y
 CONFIG_SUSPEND=y
 CONFIG_HIBERNATION=y
@@ -62,10 +66,6 @@ CONFIG_ACPI_IPMI=m
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_PCI_SLOT=y
 CONFIG_ACPI_HOTPLUG_MEMORY=y
-CONFIG_EFI_ZBOOT=y
-CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
-CONFIG_EFI_CAPSULE_LOADER=m
-CONFIG_EFI_TEST=m
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM=m
 CONFIG_JUMP_LABEL=y
@@ -74,10 +74,18 @@ CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
+CONFIG_BLK_DEV_ZONED=y
 CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_BLK_DEV_THROTTLING_LOW=y
+CONFIG_BLK_WBT=y
+CONFIG_BLK_CGROUP_IOLATENCY=y
+CONFIG_BLK_CGROUP_FC_APPID=y
+CONFIG_BLK_CGROUP_IOCOST=y
+CONFIG_BLK_CGROUP_IOPRIO=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_CMDLINE_PARTITION=y
 CONFIG_IOSCHED_BFQ=y
 CONFIG_BFQ_GROUP_IOSCHED=y
 CONFIG_BINFMT_MISC=m
@@ -93,6 +101,8 @@ CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CMA=y
+CONFIG_CMA_SYSFS=y
 CONFIG_USERFAULTFD=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -128,6 +138,7 @@ CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_ESP=m
 CONFIG_IPV6_MROUTE=y
+CONFIG_MPTCP=y
 CONFIG_NETWORK_PHY_TIMESTAMPING=y
 CONFIG_NETFILTER=y
 CONFIG_BRIDGE_NETFILTER=m
@@ -276,7 +287,6 @@ CONFIG_BRIDGE_EBT_T_NAT=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
 CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BPFILTER=y
 CONFIG_IP_SCTP=m
 CONFIG_RDS=y
 CONFIG_L2TP=m
@@ -304,7 +314,6 @@ CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=m
 CONFIG_NET_ACT_GACT=m
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_BPF=m
 CONFIG_OPENVSWITCH=m
@@ -354,6 +363,7 @@ CONFIG_PCIEAER=y
 CONFIG_PCI_IOV=y
 CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_SHPC=y
+CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCCARD=m
 CONFIG_YENTA=m
 CONFIG_RAPIDIO=y
@@ -367,6 +377,10 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_EFI_ZBOOT=y
+CONFIG_EFI_BOOTLOADER_CONTROL=m
+CONFIG_EFI_CAPSULE_LOADER=m
+CONFIG_EFI_TEST=m
 CONFIG_MTD=m
 CONFIG_MTD_BLOCK=m
 CONFIG_MTD_CFI=m
@@ -588,6 +602,7 @@ CONFIG_RTW89_8852AE=m
 CONFIG_RTW89_8852CE=m
 CONFIG_ZD1211RW=m
 CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_USB4_NET=m
 CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_EVDEV=y
@@ -693,6 +708,9 @@ CONFIG_SND_HDA_CODEC_SIGMATEL=y
 CONFIG_SND_HDA_CODEC_HDMI=y
 CONFIG_SND_HDA_CODEC_CONEXANT=y
 CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_LOONGSON_CARD=m
+CONFIG_SND_VIRTIO=m
 CONFIG_HIDRAW=y
 CONFIG_UHID=m
 CONFIG_HID_A4TECH=m
@@ -740,6 +758,11 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_EFI=y
 CONFIG_RTC_DRV_LOONGSON=y
 CONFIG_DMADEVICES=y
+CONFIG_LS2X_APB_DMA=y
+CONFIG_UDMABUF=y
+CONFIG_DMABUF_HEAPS=y
+CONFIG_DMABUF_HEAPS_SYSTEM=y
+CONFIG_DMABUF_HEAPS_CMA=y
 CONFIG_UIO=m
 CONFIG_UIO_PDRV_GENIRQ=m
 CONFIG_UIO_DMEM_GENIRQ=m
@@ -780,7 +803,15 @@ CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
 CONFIG_DEVFREQ_GOV_PERFORMANCE=y
 CONFIG_DEVFREQ_GOV_POWERSAVE=y
 CONFIG_DEVFREQ_GOV_USERSPACE=y
+CONFIG_NTB=m
+CONFIG_NTB_MSI=y
+CONFIG_NTB_IDT=m
+CONFIG_NTB_EPF=m
+CONFIG_NTB_SWITCHTEC=m
+CONFIG_NTB_PERF=m
+CONFIG_NTB_TRANSPORT=m
 CONFIG_PWM=y
+CONFIG_USB4=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -799,6 +830,10 @@ CONFIG_GFS2_FS_LOCKING_DLM=y
 CONFIG_OCFS2_FS=m
 CONFIG_BTRFS_FS=y
 CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_F2FS_FS=m
+CONFIG_F2FS_FS_SECURITY=y
+CONFIG_F2FS_CHECK_FS=y
+CONFIG_F2FS_FS_COMPRESSION=y
 CONFIG_FANOTIFY=y
 CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
 CONFIG_QUOTA=y
@@ -885,7 +920,6 @@ CONFIG_KEY_DH_OPERATIONS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_DISABLE=y
 CONFIG_SECURITY_APPARMOR=y
 CONFIG_SECURITY_YAMA=y
 CONFIG_DEFAULT_SECURITY_DAC=y
@@ -916,6 +950,9 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 CONFIG_CRYPTO_CRC32_LOONGARCH=m
 CONFIG_CRYPTO_DEV_VIRTIO=m
+CONFIG_DMA_CMA=y
+CONFIG_DMA_NUMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=0
 CONFIG_PRINTK_TIME=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/loongarch/include/asm/acpi.h b/arch/loongarch/include/asm/acpi.h
index 8de6c4b83a61..49e29b29996f 100644
--- a/arch/loongarch/include/asm/acpi.h
+++ b/arch/loongarch/include/asm/acpi.h
@@ -32,8 +32,10 @@ static inline bool acpi_has_cpu_in_madt(void)
 	return true;
 }
 
+#define MAX_CORE_PIC 256
+
 extern struct list_head acpi_wakeup_device_list;
-extern struct acpi_madt_core_pic acpi_core_pic[NR_CPUS];
+extern struct acpi_madt_core_pic acpi_core_pic[MAX_CORE_PIC];
 
 extern int __init parse_acpi_topology(void);
 
diff --git a/arch/loongarch/include/asm/bootinfo.h b/arch/loongarch/include/asm/bootinfo.h
index c60796869b2b..6d5846dd075c 100644
--- a/arch/loongarch/include/asm/bootinfo.h
+++ b/arch/loongarch/include/asm/bootinfo.h
@@ -24,13 +24,15 @@ struct loongson_board_info {
 	const char *board_vendor;
 };
 
+#define NR_WORDS DIV_ROUND_UP(NR_CPUS, BITS_PER_LONG)
+
 struct loongson_system_configuration {
 	int nr_cpus;
 	int nr_nodes;
 	int boot_cpu_id;
 	int cores_per_node;
 	int cores_per_package;
-	unsigned long cores_io_master;
+	unsigned long cores_io_master[NR_WORDS];
 	unsigned long suspend_addr;
 	const char *cpuname;
 };
@@ -42,7 +44,7 @@ extern struct loongson_system_configuration loongson_sysconf;
 
 static inline bool io_master(int cpu)
 {
-	return test_bit(cpu, &loongson_sysconf.cores_io_master);
+	return test_bit(cpu, loongson_sysconf.cores_io_master);
 }
 
 #endif /* _ASM_BOOTINFO_H */
diff --git a/arch/loongarch/include/asm/crash_core.h b/arch/loongarch/include/asm/crash_core.h
new file mode 100644
index 000000000000..218bdbfa527b
--- /dev/null
+++ b/arch/loongarch/include/asm/crash_core.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _LOONGARCH_CRASH_CORE_H
+#define _LOONGARCH_CRASH_CORE_H
+
+#define CRASH_ALIGN			SZ_2M
+
+#define CRASH_ADDR_LOW_MAX		SZ_4G
+#define CRASH_ADDR_HIGH_MAX		memblock_end_of_DRAM()
+
+extern phys_addr_t memblock_end_of_DRAM(void);
+
+#endif
diff --git a/arch/loongarch/include/asm/efi.h b/arch/loongarch/include/asm/efi.h
index 91d81f9730ab..eddc8e79b3fa 100644
--- a/arch/loongarch/include/asm/efi.h
+++ b/arch/loongarch/include/asm/efi.h
@@ -32,6 +32,4 @@ static inline unsigned long efi_get_kimg_min_align(void)
 
 #define EFI_KIMG_PREFERRED_ADDRESS	PHYSADDR(VMLINUX_LOAD_ADDRESS)
 
-unsigned long kernel_entry_address(unsigned long kernel_addr);
-
 #endif /* _ASM_LOONGARCH_EFI_H */
diff --git a/arch/loongarch/include/asm/elf.h b/arch/loongarch/include/asm/elf.h
index 9b16a3b8e706..f16bd42456e4 100644
--- a/arch/loongarch/include/asm/elf.h
+++ b/arch/loongarch/include/asm/elf.h
@@ -241,8 +241,6 @@ void loongarch_dump_regs64(u64 *uregs, const struct pt_regs *regs);
 do {									\
 	current->thread.vdso = &vdso_info;				\
 									\
-	loongarch_set_personality_fcsr(state);				\
-									\
 	if (personality(current->personality) != PER_LINUX)		\
 		set_personality(PER_LINUX);				\
 } while (0)
@@ -259,7 +257,6 @@ do {									\
 	clear_thread_flag(TIF_32BIT_ADDR);				\
 									\
 	current->thread.vdso = &vdso_info;				\
-	loongarch_set_personality_fcsr(state);				\
 									\
 	p = personality(current->personality);				\
 	if (p != PER_LINUX32 && p != PER_LINUX)				\
@@ -340,6 +337,4 @@ extern int arch_elf_pt_proc(void *ehdr, void *phdr, struct file *elf,
 extern int arch_check_elf(void *ehdr, bool has_interpreter, void *interp_ehdr,
 			  struct arch_elf_state *state);
 
-extern void loongarch_set_personality_fcsr(struct arch_elf_state *state);
-
 #endif /* _ASM_ELF_H */
diff --git a/arch/loongarch/include/asm/ftrace.h b/arch/loongarch/include/asm/ftrace.h
index a11996eb5892..de891c2c83d4 100644
--- a/arch/loongarch/include/asm/ftrace.h
+++ b/arch/loongarch/include/asm/ftrace.h
@@ -63,7 +63,7 @@ ftrace_regs_get_instruction_pointer(struct ftrace_regs *fregs)
 static __always_inline void
 ftrace_regs_set_instruction_pointer(struct ftrace_regs *fregs, unsigned long ip)
 {
-	regs_set_return_value(&fregs->regs, ip);
+	instruction_pointer_set(&fregs->regs, ip);
 }
 
 #define ftrace_regs_get_argument(fregs, n) \
diff --git a/arch/loongarch/include/asm/jump_label.h b/arch/loongarch/include/asm/jump_label.h
index 3cea299a5ef5..29acfe3de3fa 100644
--- a/arch/loongarch/include/asm/jump_label.h
+++ b/arch/loongarch/include/asm/jump_label.h
@@ -22,7 +22,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key * const key, const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	nop			\n\t"
 		JUMP_TABLE_ENTRY
 		:  :  "i"(&((char *)key)[branch]) :  : l_yes);
@@ -35,7 +35,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key * const key, const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	b	%l[l_yes]	\n\t"
 		JUMP_TABLE_ENTRY
 		:  :  "i"(&((char *)key)[branch]) :  : l_yes);
diff --git a/arch/loongarch/include/asm/kvm_host.h b/arch/loongarch/include/asm/kvm_host.h
index 11328700d4fa..2d62f7b0d377 100644
--- a/arch/loongarch/include/asm/kvm_host.h
+++ b/arch/loongarch/include/asm/kvm_host.h
@@ -45,7 +45,10 @@ struct kvm_vcpu_stat {
 	u64 signal_exits;
 };
 
+#define KVM_MEM_HUGEPAGE_CAPABLE	(1UL << 0)
+#define KVM_MEM_HUGEPAGE_INCAPABLE	(1UL << 1)
 struct kvm_arch_memory_slot {
+	unsigned long flags;
 };
 
 struct kvm_context {
@@ -92,8 +95,10 @@ enum emulation_result {
 };
 
 #define KVM_LARCH_FPU		(0x1 << 0)
-#define KVM_LARCH_SWCSR_LATEST	(0x1 << 1)
-#define KVM_LARCH_HWCSR_USABLE	(0x1 << 2)
+#define KVM_LARCH_LSX		(0x1 << 1)
+#define KVM_LARCH_LASX		(0x1 << 2)
+#define KVM_LARCH_SWCSR_LATEST	(0x1 << 3)
+#define KVM_LARCH_HWCSR_USABLE	(0x1 << 4)
 
 struct kvm_vcpu_arch {
 	/*
@@ -175,6 +180,21 @@ static inline void writel_sw_gcsr(struct loongarch_csrs *csr, int reg, unsigned
 	csr->csrs[reg] = val;
 }
 
+static inline bool kvm_guest_has_fpu(struct kvm_vcpu_arch *arch)
+{
+	return arch->cpucfg[2] & CPUCFG2_FP;
+}
+
+static inline bool kvm_guest_has_lsx(struct kvm_vcpu_arch *arch)
+{
+	return arch->cpucfg[2] & CPUCFG2_LSX;
+}
+
+static inline bool kvm_guest_has_lasx(struct kvm_vcpu_arch *arch)
+{
+	return arch->cpucfg[2] & CPUCFG2_LASX;
+}
+
 /* Debug: dump vcpu state */
 int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu);
 
@@ -183,7 +203,6 @@ void kvm_flush_tlb_all(void);
 void kvm_flush_tlb_gpa(struct kvm_vcpu *vcpu, unsigned long gpa);
 int kvm_handle_mm_fault(struct kvm_vcpu *vcpu, unsigned long badv, bool write);
 
-#define KVM_ARCH_WANT_MMU_NOTIFIER
 void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
 int kvm_unmap_hva_range(struct kvm *kvm, unsigned long start, unsigned long end, bool blockable);
 int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end);
diff --git a/arch/loongarch/include/asm/kvm_vcpu.h b/arch/loongarch/include/asm/kvm_vcpu.h
index 553cfa2b2b1c..0cb4fdb8a9b5 100644
--- a/arch/loongarch/include/asm/kvm_vcpu.h
+++ b/arch/loongarch/include/asm/kvm_vcpu.h
@@ -55,7 +55,26 @@ void kvm_save_fpu(struct loongarch_fpu *fpu);
 void kvm_restore_fpu(struct loongarch_fpu *fpu);
 void kvm_restore_fcsr(struct loongarch_fpu *fpu);
 
-void kvm_acquire_timer(struct kvm_vcpu *vcpu);
+#ifdef CONFIG_CPU_HAS_LSX
+int kvm_own_lsx(struct kvm_vcpu *vcpu);
+void kvm_save_lsx(struct loongarch_fpu *fpu);
+void kvm_restore_lsx(struct loongarch_fpu *fpu);
+#else
+static inline int kvm_own_lsx(struct kvm_vcpu *vcpu) { return -EINVAL; }
+static inline void kvm_save_lsx(struct loongarch_fpu *fpu) { }
+static inline void kvm_restore_lsx(struct loongarch_fpu *fpu) { }
+#endif
+
+#ifdef CONFIG_CPU_HAS_LASX
+int kvm_own_lasx(struct kvm_vcpu *vcpu);
+void kvm_save_lasx(struct loongarch_fpu *fpu);
+void kvm_restore_lasx(struct loongarch_fpu *fpu);
+#else
+static inline int kvm_own_lasx(struct kvm_vcpu *vcpu) { return -EINVAL; }
+static inline void kvm_save_lasx(struct loongarch_fpu *fpu) { }
+static inline void kvm_restore_lasx(struct loongarch_fpu *fpu) { }
+#endif
+
 void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long hz);
 void kvm_reset_timer(struct kvm_vcpu *vcpu);
 void kvm_save_timer(struct kvm_vcpu *vcpu);
diff --git a/arch/loongarch/include/asm/pgtable.h b/arch/loongarch/include/asm/pgtable.h
index 29d9b12298bc..8b5df1bbf9e9 100644
--- a/arch/loongarch/include/asm/pgtable.h
+++ b/arch/loongarch/include/asm/pgtable.h
@@ -523,6 +523,7 @@ static inline pmd_t pmd_wrprotect(pmd_t pmd)
 	return pmd;
 }
 
+#define pmd_dirty pmd_dirty
 static inline int pmd_dirty(pmd_t pmd)
 {
 	return !!(pmd_val(pmd) & (_PAGE_DIRTY | _PAGE_MODIFIED));
diff --git a/arch/loongarch/include/asm/shmparam.h b/arch/loongarch/include/asm/shmparam.h
deleted file mode 100644
index c9554f48d2df..000000000000
--- a/arch/loongarch/include/asm/shmparam.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
- */
-#ifndef _ASM_SHMPARAM_H
-#define _ASM_SHMPARAM_H
-
-#define __ARCH_FORCE_SHMLBA	1
-
-#define	SHMLBA	SZ_64K		 /* attach addr a multiple of this */
-
-#endif /* _ASM_SHMPARAM_H */
diff --git a/arch/loongarch/include/uapi/asm/kvm.h b/arch/loongarch/include/uapi/asm/kvm.h
index c6ad2ee6106c..923d0bd38294 100644
--- a/arch/loongarch/include/uapi/asm/kvm.h
+++ b/arch/loongarch/include/uapi/asm/kvm.h
@@ -79,6 +79,7 @@ struct kvm_fpu {
 #define LOONGARCH_REG_64(TYPE, REG)	(TYPE | KVM_REG_SIZE_U64 | (REG << LOONGARCH_REG_SHIFT))
 #define KVM_IOC_CSRID(REG)		LOONGARCH_REG_64(KVM_REG_LOONGARCH_CSR, REG)
 #define KVM_IOC_CPUCFG(REG)		LOONGARCH_REG_64(KVM_REG_LOONGARCH_CPUCFG, REG)
+#define KVM_LOONGARCH_VCPU_CPUCFG	0
 
 struct kvm_debug_exit_arch {
 };
diff --git a/arch/loongarch/kernel/acpi.c b/arch/loongarch/kernel/acpi.c
index 8e00a754e548..5cf59c617126 100644
--- a/arch/loongarch/kernel/acpi.c
+++ b/arch/loongarch/kernel/acpi.c
@@ -29,11 +29,9 @@ int disabled_cpus;
 
 u64 acpi_saved_sp;
 
-#define MAX_CORE_PIC 256
-
 #define PREFIX			"ACPI: "
 
-struct acpi_madt_core_pic acpi_core_pic[NR_CPUS];
+struct acpi_madt_core_pic acpi_core_pic[MAX_CORE_PIC];
 
 void __init __iomem * __acpi_map_table(unsigned long phys, unsigned long size)
 {
@@ -119,7 +117,7 @@ acpi_parse_eio_master(union acpi_subtable_headers *header, const unsigned long e
 		return -EINVAL;
 
 	core = eiointc->node * CORES_PER_EIO_NODE;
-	set_bit(core, &(loongson_sysconf.cores_io_master));
+	set_bit(core, loongson_sysconf.cores_io_master);
 
 	return 0;
 }
diff --git a/arch/loongarch/kernel/asm-offsets.c b/arch/loongarch/kernel/asm-offsets.c
index 173fe514fc9e..bee9f7a3108f 100644
--- a/arch/loongarch/kernel/asm-offsets.c
+++ b/arch/loongarch/kernel/asm-offsets.c
@@ -15,7 +15,7 @@
 #include <asm/processor.h>
 #include <asm/ftrace.h>
 
-void output_ptreg_defines(void)
+static void __used output_ptreg_defines(void)
 {
 	COMMENT("LoongArch pt_regs offsets.");
 	OFFSET(PT_R0, pt_regs, regs[0]);
@@ -62,7 +62,7 @@ void output_ptreg_defines(void)
 	BLANK();
 }
 
-void output_task_defines(void)
+static void __used output_task_defines(void)
 {
 	COMMENT("LoongArch task_struct offsets.");
 	OFFSET(TASK_STATE, task_struct, __state);
@@ -77,7 +77,7 @@ void output_task_defines(void)
 	BLANK();
 }
 
-void output_thread_info_defines(void)
+static void __used output_thread_info_defines(void)
 {
 	COMMENT("LoongArch thread_info offsets.");
 	OFFSET(TI_TASK, thread_info, task);
@@ -93,7 +93,7 @@ void output_thread_info_defines(void)
 	BLANK();
 }
 
-void output_thread_defines(void)
+static void __used output_thread_defines(void)
 {
 	COMMENT("LoongArch specific thread_struct offsets.");
 	OFFSET(THREAD_REG01, task_struct, thread.reg01);
@@ -129,7 +129,7 @@ void output_thread_defines(void)
 	BLANK();
 }
 
-void output_thread_fpu_defines(void)
+static void __used output_thread_fpu_defines(void)
 {
 	OFFSET(THREAD_FPR0, loongarch_fpu, fpr[0]);
 	OFFSET(THREAD_FPR1, loongarch_fpu, fpr[1]);
@@ -170,7 +170,7 @@ void output_thread_fpu_defines(void)
 	BLANK();
 }
 
-void output_thread_lbt_defines(void)
+static void __used output_thread_lbt_defines(void)
 {
 	OFFSET(THREAD_SCR0,  loongarch_lbt, scr0);
 	OFFSET(THREAD_SCR1,  loongarch_lbt, scr1);
@@ -180,7 +180,7 @@ void output_thread_lbt_defines(void)
 	BLANK();
 }
 
-void output_mm_defines(void)
+static void __used output_mm_defines(void)
 {
 	COMMENT("Size of struct page");
 	DEFINE(STRUCT_PAGE_SIZE, sizeof(struct page));
@@ -212,7 +212,7 @@ void output_mm_defines(void)
 	BLANK();
 }
 
-void output_sc_defines(void)
+static void __used output_sc_defines(void)
 {
 	COMMENT("Linux sigcontext offsets.");
 	OFFSET(SC_REGS, sigcontext, sc_regs);
@@ -220,7 +220,7 @@ void output_sc_defines(void)
 	BLANK();
 }
 
-void output_signal_defines(void)
+static void __used output_signal_defines(void)
 {
 	COMMENT("Linux signal numbers.");
 	DEFINE(_SIGHUP, SIGHUP);
@@ -258,7 +258,7 @@ void output_signal_defines(void)
 }
 
 #ifdef CONFIG_SMP
-void output_smpboot_defines(void)
+static void __used output_smpboot_defines(void)
 {
 	COMMENT("Linux smp cpu boot offsets.");
 	OFFSET(CPU_BOOT_STACK, secondary_data, stack);
@@ -268,7 +268,7 @@ void output_smpboot_defines(void)
 #endif
 
 #ifdef CONFIG_HIBERNATION
-void output_pbe_defines(void)
+static void __used output_pbe_defines(void)
 {
 	COMMENT("Linux struct pbe offsets.");
 	OFFSET(PBE_ADDRESS, pbe, address);
@@ -280,7 +280,7 @@ void output_pbe_defines(void)
 #endif
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-void output_fgraph_ret_regs_defines(void)
+static void __used output_fgraph_ret_regs_defines(void)
 {
 	COMMENT("LoongArch fgraph_ret_regs offsets.");
 	OFFSET(FGRET_REGS_A0, fgraph_ret_regs, regs[0]);
@@ -291,7 +291,7 @@ void output_fgraph_ret_regs_defines(void)
 }
 #endif
 
-void output_kvm_defines(void)
+static void __used output_kvm_defines(void)
 {
 	COMMENT("KVM/LoongArch Specific offsets.");
 
diff --git a/arch/loongarch/kernel/efi.c b/arch/loongarch/kernel/efi.c
index acb5d3385675..000825406c1f 100644
--- a/arch/loongarch/kernel/efi.c
+++ b/arch/loongarch/kernel/efi.c
@@ -140,4 +140,6 @@ void __init efi_init(void)
 
 		early_memunmap(tbl, sizeof(*tbl));
 	}
+
+	efi_esrt_init();
 }
diff --git a/arch/loongarch/kernel/elf.c b/arch/loongarch/kernel/elf.c
index 183e94fc9c69..0fa81ced28dc 100644
--- a/arch/loongarch/kernel/elf.c
+++ b/arch/loongarch/kernel/elf.c
@@ -23,8 +23,3 @@ int arch_check_elf(void *_ehdr, bool has_interpreter, void *_interp_ehdr,
 {
 	return 0;
 }
-
-void loongarch_set_personality_fcsr(struct arch_elf_state *state)
-{
-	current->thread.fpu.fcsr = boot_cpu_data.fpu_csr0;
-}
diff --git a/arch/loongarch/kernel/env.c b/arch/loongarch/kernel/env.c
index 6b3bfb0092e6..2f1f5b08638f 100644
--- a/arch/loongarch/kernel/env.c
+++ b/arch/loongarch/kernel/env.c
@@ -5,13 +5,16 @@
  * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
  */
 #include <linux/acpi.h>
+#include <linux/clk.h>
 #include <linux/efi.h>
 #include <linux/export.h>
 #include <linux/memblock.h>
+#include <linux/of_clk.h>
 #include <asm/early_ioremap.h>
 #include <asm/bootinfo.h>
 #include <asm/loongson.h>
 #include <asm/setup.h>
+#include <asm/time.h>
 
 u64 efi_system_table;
 struct loongson_system_configuration loongson_sysconf;
@@ -36,7 +39,16 @@ void __init init_environ(void)
 
 static int __init init_cpu_fullname(void)
 {
-	int cpu;
+	struct device_node *root;
+	int cpu, ret;
+	char *model;
+
+	/* Parsing cpuname from DTS model property */
+	root = of_find_node_by_path("/");
+	ret = of_property_read_string(root, "model", (const char **)&model);
+	of_node_put(root);
+	if (ret == 0)
+		loongson_sysconf.cpuname = strsep(&model, " ");
 
 	if (loongson_sysconf.cpuname && !strncmp(loongson_sysconf.cpuname, "Loongson", 8)) {
 		for (cpu = 0; cpu < NR_CPUS; cpu++)
@@ -46,6 +58,26 @@ static int __init init_cpu_fullname(void)
 }
 arch_initcall(init_cpu_fullname);
 
+static int __init fdt_cpu_clk_init(void)
+{
+	struct clk *clk;
+	struct device_node *np;
+
+	np = of_get_cpu_node(0, NULL);
+	if (!np)
+		return -ENODEV;
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk))
+		return -ENODEV;
+
+	cpu_clock_freq = clk_get_rate(clk);
+	clk_put(clk);
+
+	return 0;
+}
+late_initcall(fdt_cpu_clk_init);
+
 static ssize_t boardinfo_show(struct kobject *kobj,
 			      struct kobj_attribute *attr, char *buf)
 {
diff --git a/arch/loongarch/kernel/fpu.S b/arch/loongarch/kernel/fpu.S
index d53ab10f4644..4382e36ae3d4 100644
--- a/arch/loongarch/kernel/fpu.S
+++ b/arch/loongarch/kernel/fpu.S
@@ -349,6 +349,7 @@ SYM_FUNC_START(_restore_lsx_upper)
 	lsx_restore_all_upper a0 t0 t1
 	jr	ra
 SYM_FUNC_END(_restore_lsx_upper)
+EXPORT_SYMBOL(_restore_lsx_upper)
 
 SYM_FUNC_START(_init_lsx_upper)
 	lsx_init_all_upper t1
@@ -384,6 +385,7 @@ SYM_FUNC_START(_restore_lasx_upper)
 	lasx_restore_all_upper a0 t0 t1
 	jr	ra
 SYM_FUNC_END(_restore_lasx_upper)
+EXPORT_SYMBOL(_restore_lasx_upper)
 
 SYM_FUNC_START(_init_lasx_upper)
 	lasx_init_all_upper t1
diff --git a/arch/loongarch/kernel/head.S b/arch/loongarch/kernel/head.S
index 53b883db0786..c4f7de2e2805 100644
--- a/arch/loongarch/kernel/head.S
+++ b/arch/loongarch/kernel/head.S
@@ -34,7 +34,6 @@ pe_header:
 
 SYM_DATA(kernel_asize, .long _kernel_asize);
 SYM_DATA(kernel_fsize, .long _kernel_fsize);
-SYM_DATA(kernel_offset, .long _kernel_offset);
 
 #endif
 
@@ -75,6 +74,11 @@ SYM_CODE_START(kernel_entry)			# kernel entry point
 	la.pcrel	t0, fw_arg2
 	st.d		a2, t0, 0
 
+#ifdef CONFIG_PAGE_SIZE_4KB
+	li.d		t0, 0
+	li.d		t1, CSR_STFILL
+	csrxchg		t0, t1, LOONGARCH_CSR_IMPCTL1
+#endif
 	/* KSave3 used for percpu base, initialized as 0 */
 	csrwr		zero, PERCPU_BASE_KS
 	/* GPR21 used for percpu base (runtime), initialized as 0 */
@@ -127,6 +131,11 @@ SYM_CODE_START(smpboot_entry)
 
 	JUMP_VIRT_ADDR	t0, t1
 
+#ifdef CONFIG_PAGE_SIZE_4KB
+	li.d		t0, 0
+	li.d		t1, CSR_STFILL
+	csrxchg		t0, t1, LOONGARCH_CSR_IMPCTL1
+#endif
 	/* Enable PG */
 	li.w		t0, 0xb0		# PLV=0, IE=0, PG=1
 	csrwr		t0, LOONGARCH_CSR_CRMD
diff --git a/arch/loongarch/kernel/image-vars.h b/arch/loongarch/kernel/image-vars.h
index 5087416b9678..41ddcf56d21c 100644
--- a/arch/loongarch/kernel/image-vars.h
+++ b/arch/loongarch/kernel/image-vars.h
@@ -11,7 +11,6 @@ __efistub_strcmp		= strcmp;
 __efistub_kernel_entry		= kernel_entry;
 __efistub_kernel_asize		= kernel_asize;
 __efistub_kernel_fsize		= kernel_fsize;
-__efistub_kernel_offset		= kernel_offset;
 #if defined(CONFIG_EFI_EARLYCON) || defined(CONFIG_SYSFB)
 __efistub_screen_info		= screen_info;
 #endif
diff --git a/arch/loongarch/kernel/numa.c b/arch/loongarch/kernel/numa.c
index 6e65ff12d5c7..8fe21f868f72 100644
--- a/arch/loongarch/kernel/numa.c
+++ b/arch/loongarch/kernel/numa.c
@@ -226,32 +226,6 @@ static void __init node_mem_init(unsigned int node)
 
 #ifdef CONFIG_ACPI_NUMA
 
-/*
- * Sanity check to catch more bad NUMA configurations (they are amazingly
- * common).  Make sure the nodes cover all memory.
- */
-static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
-{
-	int i;
-	u64 numaram, biosram;
-
-	numaram = 0;
-	for (i = 0; i < mi->nr_blks; i++) {
-		u64 s = mi->blk[i].start >> PAGE_SHIFT;
-		u64 e = mi->blk[i].end >> PAGE_SHIFT;
-
-		numaram += e - s;
-		numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e);
-		if ((s64)numaram < 0)
-			numaram = 0;
-	}
-	max_pfn = max_low_pfn;
-	biosram = max_pfn - absent_pages_in_range(0, max_pfn);
-
-	BUG_ON((s64)(biosram - numaram) >= (1 << (20 - PAGE_SHIFT)));
-	return true;
-}
-
 static void __init add_node_intersection(u32 node, u64 start, u64 size, u32 type)
 {
 	static unsigned long num_physpages;
@@ -396,7 +370,7 @@ int __init init_numa_memory(void)
 		return -EINVAL;
 
 	init_node_memblock();
-	if (numa_meminfo_cover_memory(&numa_meminfo) == false)
+	if (!memblock_validate_numa_coverage(SZ_1M))
 		return -EINVAL;
 
 	for_each_node_mask(node, node_possible_map) {
diff --git a/arch/loongarch/kernel/process.c b/arch/loongarch/kernel/process.c
index 767d94cce0de..f2ff8b5d591e 100644
--- a/arch/loongarch/kernel/process.c
+++ b/arch/loongarch/kernel/process.c
@@ -85,6 +85,7 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp)
 	regs->csr_euen = euen;
 	lose_fpu(0);
 	lose_lbt(0);
+	current->thread.fpu.fcsr = boot_cpu_data.fpu_csr0;
 
 	clear_thread_flag(TIF_LSX_CTX_LIVE);
 	clear_thread_flag(TIF_LASX_CTX_LIVE);
diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c
index d183a745fb85..634ef17fd38b 100644
--- a/arch/loongarch/kernel/setup.c
+++ b/arch/loongarch/kernel/setup.c
@@ -252,38 +252,23 @@ static void __init arch_reserve_vmcore(void)
 #endif
 }
 
-/* 2MB alignment for crash kernel regions */
-#define CRASH_ALIGN	SZ_2M
-#define CRASH_ADDR_MAX	SZ_4G
-
-static void __init arch_parse_crashkernel(void)
+static void __init arch_reserve_crashkernel(void)
 {
-#ifdef CONFIG_KEXEC
 	int ret;
-	unsigned long long total_mem;
+	unsigned long long low_size = 0;
 	unsigned long long crash_base, crash_size;
+	char *cmdline = boot_command_line;
+	bool high = false;
 
-	total_mem = memblock_phys_mem_size();
-	ret = parse_crashkernel(boot_command_line, total_mem,
-				&crash_size, &crash_base,
-				NULL, NULL);
-	if (ret < 0 || crash_size <= 0)
+	if (!IS_ENABLED(CONFIG_KEXEC_CORE))
 		return;
 
-	if (crash_base <= 0) {
-		crash_base = memblock_phys_alloc_range(crash_size, CRASH_ALIGN, CRASH_ALIGN, CRASH_ADDR_MAX);
-		if (!crash_base) {
-			pr_warn("crashkernel reservation failed - No suitable area found.\n");
-			return;
-		}
-	} else if (!memblock_phys_alloc_range(crash_size, CRASH_ALIGN, crash_base, crash_base + crash_size)) {
-		pr_warn("Invalid memory region reserved for crash kernel\n");
+	ret = parse_crashkernel(cmdline, memblock_phys_mem_size(),
+				&crash_size, &crash_base, &low_size, &high);
+	if (ret)
 		return;
-	}
 
-	crashk_res.start = crash_base;
-	crashk_res.end	 = crash_base + crash_size - 1;
-#endif
+	reserve_crashkernel_generic(cmdline, crash_size, crash_base, low_size, high);
 }
 
 static void __init fdt_setup(void)
@@ -295,8 +280,12 @@ static void __init fdt_setup(void)
 	if (acpi_os_get_root_pointer())
 		return;
 
-	/* Look for a device tree configuration table entry */
-	fdt_pointer = efi_fdt_pointer();
+	/* Prefer to use built-in dtb, checking its legality first. */
+	if (!fdt_check_header(__dtb_start))
+		fdt_pointer = __dtb_start;
+	else
+		fdt_pointer = efi_fdt_pointer(); /* Fallback to firmware dtb */
+
 	if (!fdt_pointer || fdt_check_header(fdt_pointer))
 		return;
 
@@ -330,7 +319,9 @@ static void __init bootcmdline_init(char **cmdline_p)
 		if (boot_command_line[0])
 			strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
 
-		strlcat(boot_command_line, init_command_line, COMMAND_LINE_SIZE);
+		if (!strstr(boot_command_line, init_command_line))
+			strlcat(boot_command_line, init_command_line, COMMAND_LINE_SIZE);
+
 		goto out;
 	}
 #endif
@@ -357,7 +348,7 @@ out:
 void __init platform_init(void)
 {
 	arch_reserve_vmcore();
-	arch_parse_crashkernel();
+	arch_reserve_crashkernel();
 
 #ifdef CONFIG_ACPI_TABLE_UPGRADE
 	acpi_table_upgrade();
@@ -366,6 +357,8 @@ void __init platform_init(void)
 	acpi_gbl_use_default_register_widths = false;
 	acpi_boot_table_init();
 #endif
+
+	early_init_fdt_scan_reserved_mem();
 	unflatten_and_copy_device_tree();
 
 #ifdef CONFIG_NUMA
@@ -399,8 +392,6 @@ static void __init arch_mem_init(char **cmdline_p)
 
 	check_kernel_sections_mem();
 
-	early_init_fdt_scan_reserved_mem();
-
 	/*
 	 * In order to reduce the possibility of kernel panic when failed to
 	 * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate
@@ -467,15 +458,6 @@ static void __init resource_init(void)
 		request_resource(res, &data_resource);
 		request_resource(res, &bss_resource);
 	}
-
-#ifdef CONFIG_KEXEC
-	if (crashk_res.start < crashk_res.end) {
-		insert_resource(&iomem_resource, &crashk_res);
-		pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n",
-			(unsigned long)((crashk_res.end - crashk_res.start + 1) >> 20),
-			(unsigned long)(crashk_res.start  >> 20));
-	}
-#endif
 }
 
 static int __init add_legacy_isa_io(struct fwnode_handle *fwnode,
diff --git a/arch/loongarch/kernel/signal.c b/arch/loongarch/kernel/signal.c
index 4a3686d13349..7a555b600171 100644
--- a/arch/loongarch/kernel/signal.c
+++ b/arch/loongarch/kernel/signal.c
@@ -15,6 +15,7 @@
 #include <linux/context_tracking.h>
 #include <linux/entry-common.h>
 #include <linux/irqflags.h>
+#include <linux/rseq.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/personality.h>
diff --git a/arch/loongarch/kernel/smp.c b/arch/loongarch/kernel/smp.c
index 5bca12d16e06..aabee0b280fe 100644
--- a/arch/loongarch/kernel/smp.c
+++ b/arch/loongarch/kernel/smp.c
@@ -88,6 +88,73 @@ void show_ipi_list(struct seq_file *p, int prec)
 	}
 }
 
+static inline void set_cpu_core_map(int cpu)
+{
+	int i;
+
+	cpumask_set_cpu(cpu, &cpu_core_setup_map);
+
+	for_each_cpu(i, &cpu_core_setup_map) {
+		if (cpu_data[cpu].package == cpu_data[i].package) {
+			cpumask_set_cpu(i, &cpu_core_map[cpu]);
+			cpumask_set_cpu(cpu, &cpu_core_map[i]);
+		}
+	}
+}
+
+static inline void set_cpu_sibling_map(int cpu)
+{
+	int i;
+
+	cpumask_set_cpu(cpu, &cpu_sibling_setup_map);
+
+	for_each_cpu(i, &cpu_sibling_setup_map) {
+		if (cpus_are_siblings(cpu, i)) {
+			cpumask_set_cpu(i, &cpu_sibling_map[cpu]);
+			cpumask_set_cpu(cpu, &cpu_sibling_map[i]);
+		}
+	}
+}
+
+static inline void clear_cpu_sibling_map(int cpu)
+{
+	int i;
+
+	for_each_cpu(i, &cpu_sibling_setup_map) {
+		if (cpus_are_siblings(cpu, i)) {
+			cpumask_clear_cpu(i, &cpu_sibling_map[cpu]);
+			cpumask_clear_cpu(cpu, &cpu_sibling_map[i]);
+		}
+	}
+
+	cpumask_clear_cpu(cpu, &cpu_sibling_setup_map);
+}
+
+/*
+ * Calculate a new cpu_foreign_map mask whenever a
+ * new cpu appears or disappears.
+ */
+void calculate_cpu_foreign_map(void)
+{
+	int i, k, core_present;
+	cpumask_t temp_foreign_map;
+
+	/* Re-calculate the mask */
+	cpumask_clear(&temp_foreign_map);
+	for_each_online_cpu(i) {
+		core_present = 0;
+		for_each_cpu(k, &temp_foreign_map)
+			if (cpus_are_siblings(i, k))
+				core_present = 1;
+		if (!core_present)
+			cpumask_set_cpu(i, &temp_foreign_map);
+	}
+
+	for_each_online_cpu(i)
+		cpumask_andnot(&cpu_foreign_map[i],
+			       &temp_foreign_map, &cpu_sibling_map[i]);
+}
+
 /* Send mailbox buffer via Mail_Send */
 static void csr_mail_send(uint64_t data, int cpu, int mailbox)
 {
@@ -208,7 +275,7 @@ static void __init fdt_smp_setup(void)
 	}
 
 	loongson_sysconf.nr_cpus = num_processors;
-	set_bit(0, &(loongson_sysconf.cores_io_master));
+	set_bit(0, loongson_sysconf.cores_io_master);
 #endif
 }
 
@@ -216,6 +283,9 @@ void __init loongson_smp_setup(void)
 {
 	fdt_smp_setup();
 
+	if (loongson_sysconf.cores_per_package == 0)
+		loongson_sysconf.cores_per_package = num_processors;
+
 	cpu_data[0].core = cpu_logical_map(0) % loongson_sysconf.cores_per_package;
 	cpu_data[0].package = cpu_logical_map(0) / loongson_sysconf.cores_per_package;
 
@@ -300,6 +370,7 @@ int loongson_cpu_disable(void)
 	numa_remove_cpu(cpu);
 #endif
 	set_cpu_online(cpu, false);
+	clear_cpu_sibling_map(cpu);
 	calculate_cpu_foreign_map();
 	local_irq_save(flags);
 	irq_migrate_all_off_this_cpu();
@@ -334,6 +405,7 @@ void __noreturn arch_cpu_idle_dead(void)
 		addr = iocsr_read64(LOONGARCH_IOCSR_MBUF0);
 	} while (addr == 0);
 
+	local_irq_disable();
 	init_fn = (void *)TO_CACHE(addr);
 	iocsr_write32(0xffffffff, LOONGARCH_IOCSR_IPI_CLEAR);
 
@@ -376,59 +448,6 @@ static int __init ipi_pm_init(void)
 core_initcall(ipi_pm_init);
 #endif
 
-static inline void set_cpu_sibling_map(int cpu)
-{
-	int i;
-
-	cpumask_set_cpu(cpu, &cpu_sibling_setup_map);
-
-	for_each_cpu(i, &cpu_sibling_setup_map) {
-		if (cpus_are_siblings(cpu, i)) {
-			cpumask_set_cpu(i, &cpu_sibling_map[cpu]);
-			cpumask_set_cpu(cpu, &cpu_sibling_map[i]);
-		}
-	}
-}
-
-static inline void set_cpu_core_map(int cpu)
-{
-	int i;
-
-	cpumask_set_cpu(cpu, &cpu_core_setup_map);
-
-	for_each_cpu(i, &cpu_core_setup_map) {
-		if (cpu_data[cpu].package == cpu_data[i].package) {
-			cpumask_set_cpu(i, &cpu_core_map[cpu]);
-			cpumask_set_cpu(cpu, &cpu_core_map[i]);
-		}
-	}
-}
-
-/*
- * Calculate a new cpu_foreign_map mask whenever a
- * new cpu appears or disappears.
- */
-void calculate_cpu_foreign_map(void)
-{
-	int i, k, core_present;
-	cpumask_t temp_foreign_map;
-
-	/* Re-calculate the mask */
-	cpumask_clear(&temp_foreign_map);
-	for_each_online_cpu(i) {
-		core_present = 0;
-		for_each_cpu(k, &temp_foreign_map)
-			if (cpus_are_siblings(i, k))
-				core_present = 1;
-		if (!core_present)
-			cpumask_set_cpu(i, &temp_foreign_map);
-	}
-
-	for_each_online_cpu(i)
-		cpumask_andnot(&cpu_foreign_map[i],
-			       &temp_foreign_map, &cpu_sibling_map[i]);
-}
-
 /* Preload SMP state for boot cpu */
 void smp_prepare_boot_cpu(void)
 {
@@ -506,7 +525,6 @@ asmlinkage void start_secondary(void)
 	sync_counter();
 	cpu = raw_smp_processor_id();
 	set_my_cpu_offset(per_cpu_offset(cpu));
-	rcutree_report_cpu_starting(cpu);
 
 	cpu_probe();
 	constant_clockevent_init();
diff --git a/arch/loongarch/kernel/topology.c b/arch/loongarch/kernel/topology.c
index 3fd166006698..75d5c51a7cd3 100644
--- a/arch/loongarch/kernel/topology.c
+++ b/arch/loongarch/kernel/topology.c
@@ -10,47 +10,9 @@
 
 #include <acpi/processor.h>
 
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
-
 #ifdef CONFIG_HOTPLUG_CPU
-int arch_register_cpu(int cpu)
+bool arch_cpu_is_hotpluggable(int cpu)
 {
-	int ret;
-	struct cpu *c = &per_cpu(cpu_devices, cpu);
-
-	c->hotpluggable = 1;
-	ret = register_cpu(c, cpu);
-	if (ret < 0)
-		pr_warn("register_cpu %d failed (%d)\n", cpu, ret);
-
-	return ret;
-}
-EXPORT_SYMBOL(arch_register_cpu);
-
-void arch_unregister_cpu(int cpu)
-{
-	struct cpu *c = &per_cpu(cpu_devices, cpu);
-
-	c->hotpluggable = 0;
-	unregister_cpu(c);
+	return !io_master(cpu);
 }
-EXPORT_SYMBOL(arch_unregister_cpu);
 #endif
-
-static int __init topology_init(void)
-{
-	int i, ret;
-
-	for_each_present_cpu(i) {
-		struct cpu *c = &per_cpu(cpu_devices, i);
-
-		c->hotpluggable = !io_master(i);
-		ret = register_cpu(c, i);
-		if (ret < 0)
-			pr_warn("topology_init: register_cpu %d failed (%d)\n", i, ret);
-	}
-
-	return 0;
-}
-
-subsys_initcall(topology_init);
diff --git a/arch/loongarch/kernel/vmlinux.lds.S b/arch/loongarch/kernel/vmlinux.lds.S
index bb2ec86f37a8..a5d0cd2035da 100644
--- a/arch/loongarch/kernel/vmlinux.lds.S
+++ b/arch/loongarch/kernel/vmlinux.lds.S
@@ -143,7 +143,6 @@ SECTIONS
 	_kernel_fsize = _edata - _text;
 	_kernel_vsize = _end - __initdata_begin;
 	_kernel_rsize = _edata - __initdata_begin;
-	_kernel_offset = kernel_offset - _text;
 #endif
 
 	.gptab.sdata : {
diff --git a/arch/loongarch/kvm/Kconfig b/arch/loongarch/kvm/Kconfig
index fda425babfb2..61f7e33b1f95 100644
--- a/arch/loongarch/kvm/Kconfig
+++ b/arch/loongarch/kvm/Kconfig
@@ -22,14 +22,13 @@ config KVM
 	depends on AS_HAS_LVZ_EXTENSION
 	depends on HAVE_KVM
 	select HAVE_KVM_DIRTY_RING_ACQ_REL
-	select HAVE_KVM_EVENTFD
 	select HAVE_KVM_VCPU_ASYNC_IOCTL
+	select KVM_COMMON
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
 	select KVM_GENERIC_HARDWARE_ENABLING
+	select KVM_GENERIC_MMU_NOTIFIER
 	select KVM_MMIO
 	select KVM_XFER_TO_GUEST_WORK
-	select MMU_NOTIFIER
-	select PREEMPT_NOTIFIERS
 	help
 	  Support hosting virtualized guest machines using
 	  hardware virtualization extensions. You will need
diff --git a/arch/loongarch/kvm/exit.c b/arch/loongarch/kvm/exit.c
index ce8de3fa472c..ed1d89d53e2e 100644
--- a/arch/loongarch/kvm/exit.c
+++ b/arch/loongarch/kvm/exit.c
@@ -200,17 +200,8 @@ int kvm_emu_idle(struct kvm_vcpu *vcpu)
 	++vcpu->stat.idle_exits;
 	trace_kvm_exit_idle(vcpu, KVM_TRACE_EXIT_IDLE);
 
-	if (!kvm_arch_vcpu_runnable(vcpu)) {
-		/*
-		 * Switch to the software timer before halt-polling/blocking as
-		 * the guest's timer may be a break event for the vCPU, and the
-		 * hypervisor timer runs only when the CPU is in guest mode.
-		 * Switch before halt-polling so that KVM recognizes an expired
-		 * timer before blocking.
-		 */
-		kvm_save_timer(vcpu);
-		kvm_vcpu_block(vcpu);
-	}
+	if (!kvm_arch_vcpu_runnable(vcpu))
+		kvm_vcpu_halt(vcpu);
 
 	return EMULATE_DONE;
 }
@@ -643,6 +634,11 @@ static int kvm_handle_fpu_disabled(struct kvm_vcpu *vcpu)
 {
 	struct kvm_run *run = vcpu->run;
 
+	if (!kvm_guest_has_fpu(&vcpu->arch)) {
+		kvm_queue_exception(vcpu, EXCCODE_INE, 0);
+		return RESUME_GUEST;
+	}
+
 	/*
 	 * If guest FPU not present, the FPU operation should have been
 	 * treated as a reserved instruction!
@@ -660,6 +656,36 @@ static int kvm_handle_fpu_disabled(struct kvm_vcpu *vcpu)
 }
 
 /*
+ * kvm_handle_lsx_disabled() - Guest used LSX while disabled in root.
+ * @vcpu:      Virtual CPU context.
+ *
+ * Handle when the guest attempts to use LSX when it is disabled in the root
+ * context.
+ */
+static int kvm_handle_lsx_disabled(struct kvm_vcpu *vcpu)
+{
+	if (kvm_own_lsx(vcpu))
+		kvm_queue_exception(vcpu, EXCCODE_INE, 0);
+
+	return RESUME_GUEST;
+}
+
+/*
+ * kvm_handle_lasx_disabled() - Guest used LASX while disabled in root.
+ * @vcpu:	Virtual CPU context.
+ *
+ * Handle when the guest attempts to use LASX when it is disabled in the root
+ * context.
+ */
+static int kvm_handle_lasx_disabled(struct kvm_vcpu *vcpu)
+{
+	if (kvm_own_lasx(vcpu))
+		kvm_queue_exception(vcpu, EXCCODE_INE, 0);
+
+	return RESUME_GUEST;
+}
+
+/*
  * LoongArch KVM callback handling for unimplemented guest exiting
  */
 static int kvm_fault_ni(struct kvm_vcpu *vcpu)
@@ -687,6 +713,8 @@ static exit_handle_fn kvm_fault_tables[EXCCODE_INT_START] = {
 	[EXCCODE_TLBS]			= kvm_handle_write_fault,
 	[EXCCODE_TLBM]			= kvm_handle_write_fault,
 	[EXCCODE_FPDIS]			= kvm_handle_fpu_disabled,
+	[EXCCODE_LSXDIS]		= kvm_handle_lsx_disabled,
+	[EXCCODE_LASXDIS]		= kvm_handle_lasx_disabled,
 	[EXCCODE_GSPR]			= kvm_handle_gspr,
 };
 
diff --git a/arch/loongarch/kvm/main.c b/arch/loongarch/kvm/main.c
index 1c1d5199500e..86a2f2d0cb27 100644
--- a/arch/loongarch/kvm/main.c
+++ b/arch/loongarch/kvm/main.c
@@ -287,7 +287,6 @@ int kvm_arch_hardware_enable(void)
 	if (env & CSR_GCFG_MATC_ROOT)
 		gcfg |= CSR_GCFG_MATC_ROOT;
 
-	gcfg |= CSR_GCFG_TIT;
 	write_csr_gcfg(gcfg);
 
 	kvm_flush_tlb_all();
diff --git a/arch/loongarch/kvm/mmu.c b/arch/loongarch/kvm/mmu.c
index 80480df5f550..50a6acd7ffe4 100644
--- a/arch/loongarch/kvm/mmu.c
+++ b/arch/loongarch/kvm/mmu.c
@@ -13,6 +13,16 @@
 #include <asm/tlb.h>
 #include <asm/kvm_mmu.h>
 
+static inline bool kvm_hugepage_capable(struct kvm_memory_slot *slot)
+{
+	return slot->arch.flags & KVM_MEM_HUGEPAGE_CAPABLE;
+}
+
+static inline bool kvm_hugepage_incapable(struct kvm_memory_slot *slot)
+{
+	return slot->arch.flags & KVM_MEM_HUGEPAGE_INCAPABLE;
+}
+
 static inline void kvm_ptw_prepare(struct kvm *kvm, kvm_ptw_ctx *ctx)
 {
 	ctx->level = kvm->arch.root_level;
@@ -365,6 +375,69 @@ void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm,
 	kvm_ptw_top(kvm->arch.pgd, start << PAGE_SHIFT, end << PAGE_SHIFT, &ctx);
 }
 
+int kvm_arch_prepare_memory_region(struct kvm *kvm, const struct kvm_memory_slot *old,
+				   struct kvm_memory_slot *new, enum kvm_mr_change change)
+{
+	gpa_t gpa_start;
+	hva_t hva_start;
+	size_t size, gpa_offset, hva_offset;
+
+	if ((change != KVM_MR_MOVE) && (change != KVM_MR_CREATE))
+		return 0;
+	/*
+	 * Prevent userspace from creating a memory region outside of the
+	 * VM GPA address space
+	 */
+	if ((new->base_gfn + new->npages) > (kvm->arch.gpa_size >> PAGE_SHIFT))
+		return -ENOMEM;
+
+	new->arch.flags = 0;
+	size = new->npages * PAGE_SIZE;
+	gpa_start = new->base_gfn << PAGE_SHIFT;
+	hva_start = new->userspace_addr;
+	if (IS_ALIGNED(size, PMD_SIZE) && IS_ALIGNED(gpa_start, PMD_SIZE)
+			&& IS_ALIGNED(hva_start, PMD_SIZE))
+		new->arch.flags |= KVM_MEM_HUGEPAGE_CAPABLE;
+	else {
+		/*
+		 * Pages belonging to memslots that don't have the same
+		 * alignment within a PMD for userspace and GPA cannot be
+		 * mapped with PMD entries, because we'll end up mapping
+		 * the wrong pages.
+		 *
+		 * Consider a layout like the following:
+		 *
+		 *    memslot->userspace_addr:
+		 *    +-----+--------------------+--------------------+---+
+		 *    |abcde|fgh  Stage-1 block  |    Stage-1 block tv|xyz|
+		 *    +-----+--------------------+--------------------+---+
+		 *
+		 *    memslot->base_gfn << PAGE_SIZE:
+		 *      +---+--------------------+--------------------+-----+
+		 *      |abc|def  Stage-2 block  |    Stage-2 block   |tvxyz|
+		 *      +---+--------------------+--------------------+-----+
+		 *
+		 * If we create those stage-2 blocks, we'll end up with this
+		 * incorrect mapping:
+		 *   d -> f
+		 *   e -> g
+		 *   f -> h
+		 */
+		gpa_offset = gpa_start & (PMD_SIZE - 1);
+		hva_offset = hva_start & (PMD_SIZE - 1);
+		if (gpa_offset != hva_offset) {
+			new->arch.flags |= KVM_MEM_HUGEPAGE_INCAPABLE;
+		} else {
+			if (gpa_offset == 0)
+				gpa_offset = PMD_SIZE;
+			if ((size + gpa_offset) < (PMD_SIZE * 2))
+				new->arch.flags |= KVM_MEM_HUGEPAGE_INCAPABLE;
+		}
+	}
+
+	return 0;
+}
+
 void kvm_arch_commit_memory_region(struct kvm *kvm,
 				   struct kvm_memory_slot *old,
 				   const struct kvm_memory_slot *new,
@@ -562,47 +635,23 @@ out:
 }
 
 static bool fault_supports_huge_mapping(struct kvm_memory_slot *memslot,
-				unsigned long hva, unsigned long map_size, bool write)
+				unsigned long hva, bool write)
 {
-	size_t size;
-	gpa_t gpa_start;
-	hva_t uaddr_start, uaddr_end;
+	hva_t start, end;
 
 	/* Disable dirty logging on HugePages */
 	if (kvm_slot_dirty_track_enabled(memslot) && write)
 		return false;
 
-	size = memslot->npages * PAGE_SIZE;
-	gpa_start = memslot->base_gfn << PAGE_SHIFT;
-	uaddr_start = memslot->userspace_addr;
-	uaddr_end = uaddr_start + size;
+	if (kvm_hugepage_capable(memslot))
+		return true;
 
-	/*
-	 * Pages belonging to memslots that don't have the same alignment
-	 * within a PMD for userspace and GPA cannot be mapped with stage-2
-	 * PMD entries, because we'll end up mapping the wrong pages.
-	 *
-	 * Consider a layout like the following:
-	 *
-	 *    memslot->userspace_addr:
-	 *    +-----+--------------------+--------------------+---+
-	 *    |abcde|fgh  Stage-1 block  |    Stage-1 block tv|xyz|
-	 *    +-----+--------------------+--------------------+---+
-	 *
-	 *    memslot->base_gfn << PAGE_SIZE:
-	 *      +---+--------------------+--------------------+-----+
-	 *      |abc|def  Stage-2 block  |    Stage-2 block   |tvxyz|
-	 *      +---+--------------------+--------------------+-----+
-	 *
-	 * If we create those stage-2 blocks, we'll end up with this incorrect
-	 * mapping:
-	 *   d -> f
-	 *   e -> g
-	 *   f -> h
-	 */
-	if ((gpa_start & (map_size - 1)) != (uaddr_start & (map_size - 1)))
+	if (kvm_hugepage_incapable(memslot))
 		return false;
 
+	start = memslot->userspace_addr;
+	end = start + memslot->npages * PAGE_SIZE;
+
 	/*
 	 * Next, let's make sure we're not trying to map anything not covered
 	 * by the memslot. This means we have to prohibit block size mappings
@@ -615,8 +664,7 @@ static bool fault_supports_huge_mapping(struct kvm_memory_slot *memslot,
 	 * userspace_addr or the base_gfn, as both are equally aligned (per
 	 * the check above) and equally sized.
 	 */
-	return (hva & ~(map_size - 1)) >= uaddr_start &&
-		(hva & ~(map_size - 1)) + map_size <= uaddr_end;
+	return (hva >= ALIGN(start, PMD_SIZE)) && (hva < ALIGN_DOWN(end, PMD_SIZE));
 }
 
 /*
@@ -627,7 +675,7 @@ static bool fault_supports_huge_mapping(struct kvm_memory_slot *memslot,
  *
  * There are several ways to safely use this helper:
  *
- * - Check mmu_invalidate_retry_hva() after grabbing the mapping level, before
+ * - Check mmu_invalidate_retry_gfn() after grabbing the mapping level, before
  *   consuming it.  In this case, mmu_lock doesn't need to be held during the
  *   lookup, but it does need to be held while checking the MMU notifier.
  *
@@ -807,7 +855,7 @@ retry:
 
 	/* Check if an invalidation has taken place since we got pfn */
 	spin_lock(&kvm->mmu_lock);
-	if (mmu_invalidate_retry_hva(kvm, mmu_seq, hva)) {
+	if (mmu_invalidate_retry_gfn(kvm, mmu_seq, gfn)) {
 		/*
 		 * This can happen when mappings are changed asynchronously, but
 		 * also synchronously if a COW is triggered by
@@ -842,7 +890,7 @@ retry:
 
 	/* Disable dirty logging on HugePages */
 	level = 0;
-	if (!fault_supports_huge_mapping(memslot, hva, PMD_SIZE, write)) {
+	if (!fault_supports_huge_mapping(memslot, hva, write)) {
 		level = 0;
 	} else {
 		level = host_pfn_mapping_level(kvm, gfn, memslot);
@@ -901,12 +949,6 @@ void kvm_arch_sync_dirty_log(struct kvm *kvm, struct kvm_memory_slot *memslot)
 {
 }
 
-int kvm_arch_prepare_memory_region(struct kvm *kvm, const struct kvm_memory_slot *old,
-				   struct kvm_memory_slot *new, enum kvm_mr_change change)
-{
-	return 0;
-}
-
 void kvm_arch_flush_remote_tlbs_memslot(struct kvm *kvm,
 					const struct kvm_memory_slot *memslot)
 {
diff --git a/arch/loongarch/kvm/switch.S b/arch/loongarch/kvm/switch.S
index 0ed9040307b7..ba976509bfe8 100644
--- a/arch/loongarch/kvm/switch.S
+++ b/arch/loongarch/kvm/switch.S
@@ -245,6 +245,37 @@ SYM_FUNC_START(kvm_restore_fpu)
 	jr                 ra
 SYM_FUNC_END(kvm_restore_fpu)
 
+#ifdef CONFIG_CPU_HAS_LSX
+SYM_FUNC_START(kvm_save_lsx)
+	fpu_save_csr    a0 t1
+	fpu_save_cc     a0 t1 t2
+	lsx_save_data   a0 t1
+	jr              ra
+SYM_FUNC_END(kvm_save_lsx)
+
+SYM_FUNC_START(kvm_restore_lsx)
+	lsx_restore_data a0 t1
+	fpu_restore_cc   a0 t1 t2
+	fpu_restore_csr  a0 t1 t2
+	jr               ra
+SYM_FUNC_END(kvm_restore_lsx)
+#endif
+
+#ifdef CONFIG_CPU_HAS_LASX
+SYM_FUNC_START(kvm_save_lasx)
+	fpu_save_csr    a0 t1
+	fpu_save_cc     a0 t1 t2
+	lasx_save_data  a0 t1
+	jr              ra
+SYM_FUNC_END(kvm_save_lasx)
+
+SYM_FUNC_START(kvm_restore_lasx)
+	lasx_restore_data a0 t1
+	fpu_restore_cc    a0 t1 t2
+	fpu_restore_csr   a0 t1 t2
+	jr                ra
+SYM_FUNC_END(kvm_restore_lasx)
+#endif
 	.section ".rodata"
 SYM_DATA(kvm_exception_size, .quad kvm_exc_entry_end - kvm_exc_entry)
 SYM_DATA(kvm_enter_guest_size, .quad kvm_enter_guest_end - kvm_enter_guest)
diff --git a/arch/loongarch/kvm/timer.c b/arch/loongarch/kvm/timer.c
index 284bf553fefe..111328f60872 100644
--- a/arch/loongarch/kvm/timer.c
+++ b/arch/loongarch/kvm/timer.c
@@ -65,40 +65,23 @@ void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long timer_hz)
 }
 
 /*
- * Restore hard timer state and enable guest to access timer registers
- * without trap, should be called with irq disabled
- */
-void kvm_acquire_timer(struct kvm_vcpu *vcpu)
-{
-	unsigned long cfg;
-
-	cfg = read_csr_gcfg();
-	if (!(cfg & CSR_GCFG_TIT))
-		return;
-
-	/* Enable guest access to hard timer */
-	write_csr_gcfg(cfg & ~CSR_GCFG_TIT);
-
-	/*
-	 * Freeze the soft-timer and sync the guest stable timer with it. We do
-	 * this with interrupts disabled to avoid latency.
-	 */
-	hrtimer_cancel(&vcpu->arch.swtimer);
-}
-
-/*
  * Restore soft timer state from saved context.
  */
 void kvm_restore_timer(struct kvm_vcpu *vcpu)
 {
-	unsigned long cfg, delta, period;
+	unsigned long cfg, estat;
+	unsigned long ticks, delta, period;
 	ktime_t expire, now;
 	struct loongarch_csrs *csr = vcpu->arch.csr;
 
 	/*
 	 * Set guest stable timer cfg csr
+	 * Disable timer before restore estat CSR register, avoid to
+	 * get invalid timer interrupt for old timer cfg
 	 */
 	cfg = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG);
+
+	write_gcsr_timercfg(0);
 	kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_ESTAT);
 	kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_TCFG);
 	if (!(cfg & CSR_TCFG_EN)) {
@@ -108,23 +91,55 @@ void kvm_restore_timer(struct kvm_vcpu *vcpu)
 	}
 
 	/*
+	 * Freeze the soft-timer and sync the guest stable timer with it.
+	 */
+	hrtimer_cancel(&vcpu->arch.swtimer);
+
+	/*
+	 * From LoongArch Reference Manual Volume 1 Chapter 7.6.2
+	 * If oneshot timer is fired, CSR TVAL will be -1, there are two
+	 * conditions:
+	 *  1) timer is fired during exiting to host
+	 *  2) timer is fired and vm is doing timer irq, and then exiting to
+	 *     host. Host should not inject timer irq to avoid spurious
+	 *     timer interrupt again
+	 */
+	ticks = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TVAL);
+	estat = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_ESTAT);
+	if (!(cfg & CSR_TCFG_PERIOD) && (ticks > cfg)) {
+		/*
+		 * Writing 0 to LOONGARCH_CSR_TVAL will inject timer irq
+		 * and set CSR TVAL with -1
+		 */
+		write_gcsr_timertick(0);
+
+		/*
+		 * Writing CSR_TINTCLR_TI to LOONGARCH_CSR_TINTCLR will clear
+		 * timer interrupt, and CSR TVAL keeps unchanged with -1, it
+		 * avoids spurious timer interrupt
+		 */
+		if (!(estat & CPU_TIMER))
+			gcsr_write(CSR_TINTCLR_TI, LOONGARCH_CSR_TINTCLR);
+		return;
+	}
+
+	/*
 	 * Set remainder tick value if not expired
 	 */
+	delta = 0;
 	now = ktime_get();
 	expire = vcpu->arch.expire;
 	if (ktime_before(now, expire))
 		delta = ktime_to_tick(vcpu, ktime_sub(expire, now));
-	else {
-		if (cfg & CSR_TCFG_PERIOD) {
-			period = cfg & CSR_TCFG_VAL;
-			delta = ktime_to_tick(vcpu, ktime_sub(now, expire));
-			delta = period - (delta % period);
-		} else
-			delta = 0;
+	else if (cfg & CSR_TCFG_PERIOD) {
+		period = cfg & CSR_TCFG_VAL;
+		delta = ktime_to_tick(vcpu, ktime_sub(now, expire));
+		delta = period - (delta % period);
+
 		/*
 		 * Inject timer here though sw timer should inject timer
 		 * interrupt async already, since sw timer may be cancelled
-		 * during injecting intr async in function kvm_acquire_timer
+		 * during injecting intr async
 		 */
 		kvm_queue_irq(vcpu, INT_TI);
 	}
@@ -139,27 +154,41 @@ void kvm_restore_timer(struct kvm_vcpu *vcpu)
  */
 static void _kvm_save_timer(struct kvm_vcpu *vcpu)
 {
-	unsigned long ticks, delta;
+	unsigned long ticks, delta, cfg;
 	ktime_t expire;
 	struct loongarch_csrs *csr = vcpu->arch.csr;
 
+	cfg = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG);
 	ticks = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TVAL);
-	delta = tick_to_ns(vcpu, ticks);
-	expire = ktime_add_ns(ktime_get(), delta);
-	vcpu->arch.expire = expire;
-	if (ticks) {
+
+	/*
+	 * From LoongArch Reference Manual Volume 1 Chapter 7.6.2
+	 * If period timer is fired, CSR TVAL will be reloaded from CSR TCFG
+	 * If oneshot timer is fired, CSR TVAL will be -1
+	 * Here judge one-shot timer fired by checking whether TVAL is larger
+	 * than TCFG
+	 */
+	if (ticks < cfg) {
+		delta = tick_to_ns(vcpu, ticks);
+		expire = ktime_add_ns(ktime_get(), delta);
+		vcpu->arch.expire = expire;
+
 		/*
-		 * Update hrtimer to use new timeout
 		 * HRTIMER_MODE_PINNED is suggested since vcpu may run in
 		 * the same physical cpu in next time
 		 */
-		hrtimer_cancel(&vcpu->arch.swtimer);
 		hrtimer_start(&vcpu->arch.swtimer, expire, HRTIMER_MODE_ABS_PINNED);
-	} else
+	} else if (vcpu->stat.generic.blocking) {
 		/*
-		 * Inject timer interrupt so that hall polling can dectect and exit
+		 * Inject timer interrupt so that halt polling can dectect and exit.
+		 * VCPU is scheduled out already and sleeps in rcuwait queue and
+		 * will not poll pending events again. kvm_queue_irq() is not enough,
+		 * hrtimer swtimer should be used here.
 		 */
-		kvm_queue_irq(vcpu, INT_TI);
+		expire = ktime_add_ns(ktime_get(), 10);
+		vcpu->arch.expire = expire;
+		hrtimer_start(&vcpu->arch.swtimer, expire, HRTIMER_MODE_ABS_PINNED);
+	}
 }
 
 /*
@@ -168,21 +197,15 @@ static void _kvm_save_timer(struct kvm_vcpu *vcpu)
  */
 void kvm_save_timer(struct kvm_vcpu *vcpu)
 {
-	unsigned long cfg;
 	struct loongarch_csrs *csr = vcpu->arch.csr;
 
 	preempt_disable();
-	cfg = read_csr_gcfg();
-	if (!(cfg & CSR_GCFG_TIT)) {
-		/* Disable guest use of hard timer */
-		write_csr_gcfg(cfg | CSR_GCFG_TIT);
-
-		/* Save hard timer state */
-		kvm_save_hw_gcsr(csr, LOONGARCH_CSR_TCFG);
-		kvm_save_hw_gcsr(csr, LOONGARCH_CSR_TVAL);
-		if (kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG) & CSR_TCFG_EN)
-			_kvm_save_timer(vcpu);
-	}
+
+	/* Save hard timer state */
+	kvm_save_hw_gcsr(csr, LOONGARCH_CSR_TCFG);
+	kvm_save_hw_gcsr(csr, LOONGARCH_CSR_TVAL);
+	if (kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG) & CSR_TCFG_EN)
+		_kvm_save_timer(vcpu);
 
 	/* Save timer-related state to vCPU context */
 	kvm_save_hw_gcsr(csr, LOONGARCH_CSR_ESTAT);
diff --git a/arch/loongarch/kvm/trace.h b/arch/loongarch/kvm/trace.h
index a1e35d655418..c2484ad4cffa 100644
--- a/arch/loongarch/kvm/trace.h
+++ b/arch/loongarch/kvm/trace.h
@@ -102,6 +102,8 @@ TRACE_EVENT(kvm_exit_gspr,
 #define KVM_TRACE_AUX_DISCARD		4
 
 #define KVM_TRACE_AUX_FPU		1
+#define KVM_TRACE_AUX_LSX		2
+#define KVM_TRACE_AUX_LASX		3
 
 #define kvm_trace_symbol_aux_op				\
 	{ KVM_TRACE_AUX_SAVE,		"save" },	\
@@ -111,7 +113,9 @@ TRACE_EVENT(kvm_exit_gspr,
 	{ KVM_TRACE_AUX_DISCARD,	"discard" }
 
 #define kvm_trace_symbol_aux_state			\
-	{ KVM_TRACE_AUX_FPU,     "FPU" }
+	{ KVM_TRACE_AUX_FPU,     "FPU" },		\
+	{ KVM_TRACE_AUX_LSX,     "LSX" },		\
+	{ KVM_TRACE_AUX_LASX,    "LASX" }
 
 TRACE_EVENT(kvm_aux,
 	    TP_PROTO(struct kvm_vcpu *vcpu, unsigned int op,
diff --git a/arch/loongarch/kvm/vcpu.c b/arch/loongarch/kvm/vcpu.c
index 73d0c2b9c1a5..36106922b5d7 100644
--- a/arch/loongarch/kvm/vcpu.c
+++ b/arch/loongarch/kvm/vcpu.c
@@ -95,7 +95,6 @@ static int kvm_pre_enter_guest(struct kvm_vcpu *vcpu)
 		 * check vmid before vcpu enter guest
 		 */
 		local_irq_disable();
-		kvm_acquire_timer(vcpu);
 		kvm_deliver_intr(vcpu);
 		kvm_deliver_exception(vcpu);
 		/* Make sure the vcpu mode has been written */
@@ -187,8 +186,15 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 
 int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 {
-	return kvm_pending_timer(vcpu) ||
+	int ret;
+
+	/* Protect from TOD sync and vcpu_load/put() */
+	preempt_disable();
+	ret = kvm_pending_timer(vcpu) ||
 		kvm_read_hw_gcsr(LOONGARCH_CSR_ESTAT) & (1 << INT_TI);
+	preempt_enable();
+
+	return ret;
 }
 
 int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu)
@@ -244,23 +250,6 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 	return -EINVAL;
 }
 
-/**
- * kvm_migrate_count() - Migrate timer.
- * @vcpu:       Virtual CPU.
- *
- * Migrate hrtimer to the current CPU by cancelling and restarting it
- * if the hrtimer is active.
- *
- * Must be called when the vCPU is migrated to a different CPU, so that
- * the timer can interrupt the guest at the new CPU, and the timer irq can
- * be delivered to the vCPU.
- */
-static void kvm_migrate_count(struct kvm_vcpu *vcpu)
-{
-	if (hrtimer_cancel(&vcpu->arch.swtimer))
-		hrtimer_restart(&vcpu->arch.swtimer);
-}
-
 static int _kvm_getcsr(struct kvm_vcpu *vcpu, unsigned int id, u64 *val)
 {
 	unsigned long gintc;
@@ -309,6 +298,75 @@ static int _kvm_setcsr(struct kvm_vcpu *vcpu, unsigned int id, u64 val)
 	return ret;
 }
 
+static int _kvm_get_cpucfg_mask(int id, u64 *v)
+{
+	if (id < 0 || id >= KVM_MAX_CPUCFG_REGS)
+		return -EINVAL;
+
+	switch (id) {
+	case 2:
+		/* CPUCFG2 features unconditionally supported by KVM */
+		*v = CPUCFG2_FP     | CPUCFG2_FPSP  | CPUCFG2_FPDP     |
+		     CPUCFG2_FPVERS | CPUCFG2_LLFTP | CPUCFG2_LLFTPREV |
+		     CPUCFG2_LAM;
+		/*
+		 * For the ISA extensions listed below, if one is supported
+		 * by the host, then it is also supported by KVM.
+		 */
+		if (cpu_has_lsx)
+			*v |= CPUCFG2_LSX;
+		if (cpu_has_lasx)
+			*v |= CPUCFG2_LASX;
+
+		return 0;
+	default:
+		/*
+		 * No restrictions on other valid CPUCFG IDs' values, but
+		 * CPUCFG data is limited to 32 bits as the LoongArch ISA
+		 * manual says (Volume 1, Section 2.2.10.5 "CPUCFG").
+		 */
+		*v = U32_MAX;
+		return 0;
+	}
+}
+
+static int kvm_check_cpucfg(int id, u64 val)
+{
+	int ret;
+	u64 mask = 0;
+
+	ret = _kvm_get_cpucfg_mask(id, &mask);
+	if (ret)
+		return ret;
+
+	if (val & ~mask)
+		/* Unsupported features and/or the higher 32 bits should not be set */
+		return -EINVAL;
+
+	switch (id) {
+	case 2:
+		if (!(val & CPUCFG2_LLFTP))
+			/* Guests must have a constant timer */
+			return -EINVAL;
+		if ((val & CPUCFG2_FP) && (!(val & CPUCFG2_FPSP) || !(val & CPUCFG2_FPDP)))
+			/* Single and double float point must both be set when FP is enabled */
+			return -EINVAL;
+		if ((val & CPUCFG2_LSX) && !(val & CPUCFG2_FP))
+			/* LSX architecturally implies FP but val does not satisfy that */
+			return -EINVAL;
+		if ((val & CPUCFG2_LASX) && !(val & CPUCFG2_LSX))
+			/* LASX architecturally implies LSX and FP but val does not satisfy that */
+			return -EINVAL;
+		return 0;
+	default:
+		/*
+		 * Values for the other CPUCFG IDs are not being further validated
+		 * besides the mask check above.
+		 */
+		return 0;
+	}
+}
+
 static int kvm_get_one_reg(struct kvm_vcpu *vcpu,
 		const struct kvm_one_reg *reg, u64 *v)
 {
@@ -378,10 +436,10 @@ static int kvm_set_one_reg(struct kvm_vcpu *vcpu,
 		break;
 	case KVM_REG_LOONGARCH_CPUCFG:
 		id = KVM_GET_IOC_CPUCFG_IDX(reg->id);
-		if (id >= 0 && id < KVM_MAX_CPUCFG_REGS)
-			vcpu->arch.cpucfg[id] = (u32)v;
-		else
-			ret = -EINVAL;
+		ret = kvm_check_cpucfg(id, v);
+		if (ret)
+			break;
+		vcpu->arch.cpucfg[id] = (u32)v;
 		break;
 	case KVM_REG_LOONGARCH_KVM:
 		switch (reg->id) {
@@ -471,10 +529,94 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 	return -EINVAL;
 }
 
+static int kvm_loongarch_cpucfg_has_attr(struct kvm_vcpu *vcpu,
+					 struct kvm_device_attr *attr)
+{
+	switch (attr->attr) {
+	case 2:
+		return 0;
+	default:
+		return -ENXIO;
+	}
+
+	return -ENXIO;
+}
+
+static int kvm_loongarch_vcpu_has_attr(struct kvm_vcpu *vcpu,
+				       struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	case KVM_LOONGARCH_VCPU_CPUCFG:
+		ret = kvm_loongarch_cpucfg_has_attr(vcpu, attr);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static int kvm_loongarch_get_cpucfg_attr(struct kvm_vcpu *vcpu,
+					 struct kvm_device_attr *attr)
+{
+	int ret = 0;
+	uint64_t val;
+	uint64_t __user *uaddr = (uint64_t __user *)attr->addr;
+
+	ret = _kvm_get_cpucfg_mask(attr->attr, &val);
+	if (ret)
+		return ret;
+
+	put_user(val, uaddr);
+
+	return ret;
+}
+
+static int kvm_loongarch_vcpu_get_attr(struct kvm_vcpu *vcpu,
+				       struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	case KVM_LOONGARCH_VCPU_CPUCFG:
+		ret = kvm_loongarch_get_cpucfg_attr(vcpu, attr);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static int kvm_loongarch_cpucfg_set_attr(struct kvm_vcpu *vcpu,
+					 struct kvm_device_attr *attr)
+{
+	return -ENXIO;
+}
+
+static int kvm_loongarch_vcpu_set_attr(struct kvm_vcpu *vcpu,
+				       struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	case KVM_LOONGARCH_VCPU_CPUCFG:
+		ret = kvm_loongarch_cpucfg_set_attr(vcpu, attr);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
 long kvm_arch_vcpu_ioctl(struct file *filp,
 			 unsigned int ioctl, unsigned long arg)
 {
 	long r;
+	struct kvm_device_attr attr;
 	void __user *argp = (void __user *)arg;
 	struct kvm_vcpu *vcpu = filp->private_data;
 
@@ -514,6 +656,27 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = kvm_vcpu_ioctl_enable_cap(vcpu, &cap);
 		break;
 	}
+	case KVM_HAS_DEVICE_ATTR: {
+		r = -EFAULT;
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			break;
+		r = kvm_loongarch_vcpu_has_attr(vcpu, &attr);
+		break;
+	}
+	case KVM_GET_DEVICE_ATTR: {
+		r = -EFAULT;
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			break;
+		r = kvm_loongarch_vcpu_get_attr(vcpu, &attr);
+		break;
+	}
+	case KVM_SET_DEVICE_ATTR: {
+		r = -EFAULT;
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			break;
+		r = kvm_loongarch_vcpu_set_attr(vcpu, &attr);
+		break;
+	}
 	default:
 		r = -ENOIOCTLCMD;
 		break;
@@ -561,12 +724,96 @@ void kvm_own_fpu(struct kvm_vcpu *vcpu)
 	preempt_enable();
 }
 
+#ifdef CONFIG_CPU_HAS_LSX
+/* Enable LSX and restore context */
+int kvm_own_lsx(struct kvm_vcpu *vcpu)
+{
+	if (!kvm_guest_has_fpu(&vcpu->arch) || !kvm_guest_has_lsx(&vcpu->arch))
+		return -EINVAL;
+
+	preempt_disable();
+
+	/* Enable LSX for guest */
+	set_csr_euen(CSR_EUEN_LSXEN | CSR_EUEN_FPEN);
+	switch (vcpu->arch.aux_inuse & KVM_LARCH_FPU) {
+	case KVM_LARCH_FPU:
+		/*
+		 * Guest FPU state already loaded,
+		 * only restore upper LSX state
+		 */
+		_restore_lsx_upper(&vcpu->arch.fpu);
+		break;
+	default:
+		/* Neither FP or LSX already active,
+		 * restore full LSX state
+		 */
+		kvm_restore_lsx(&vcpu->arch.fpu);
+		break;
+	}
+
+	trace_kvm_aux(vcpu, KVM_TRACE_AUX_RESTORE, KVM_TRACE_AUX_LSX);
+	vcpu->arch.aux_inuse |= KVM_LARCH_LSX | KVM_LARCH_FPU;
+	preempt_enable();
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_CPU_HAS_LASX
+/* Enable LASX and restore context */
+int kvm_own_lasx(struct kvm_vcpu *vcpu)
+{
+	if (!kvm_guest_has_fpu(&vcpu->arch) || !kvm_guest_has_lsx(&vcpu->arch) || !kvm_guest_has_lasx(&vcpu->arch))
+		return -EINVAL;
+
+	preempt_disable();
+
+	set_csr_euen(CSR_EUEN_FPEN | CSR_EUEN_LSXEN | CSR_EUEN_LASXEN);
+	switch (vcpu->arch.aux_inuse & (KVM_LARCH_FPU | KVM_LARCH_LSX)) {
+	case KVM_LARCH_LSX:
+	case KVM_LARCH_LSX | KVM_LARCH_FPU:
+		/* Guest LSX state already loaded, only restore upper LASX state */
+		_restore_lasx_upper(&vcpu->arch.fpu);
+		break;
+	case KVM_LARCH_FPU:
+		/* Guest FP state already loaded, only restore upper LSX & LASX state */
+		_restore_lsx_upper(&vcpu->arch.fpu);
+		_restore_lasx_upper(&vcpu->arch.fpu);
+		break;
+	default:
+		/* Neither FP or LSX already active, restore full LASX state */
+		kvm_restore_lasx(&vcpu->arch.fpu);
+		break;
+	}
+
+	trace_kvm_aux(vcpu, KVM_TRACE_AUX_RESTORE, KVM_TRACE_AUX_LASX);
+	vcpu->arch.aux_inuse |= KVM_LARCH_LASX | KVM_LARCH_LSX | KVM_LARCH_FPU;
+	preempt_enable();
+
+	return 0;
+}
+#endif
+
 /* Save context and disable FPU */
 void kvm_lose_fpu(struct kvm_vcpu *vcpu)
 {
 	preempt_disable();
 
-	if (vcpu->arch.aux_inuse & KVM_LARCH_FPU) {
+	if (vcpu->arch.aux_inuse & KVM_LARCH_LASX) {
+		kvm_save_lasx(&vcpu->arch.fpu);
+		vcpu->arch.aux_inuse &= ~(KVM_LARCH_LSX | KVM_LARCH_FPU | KVM_LARCH_LASX);
+		trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_LASX);
+
+		/* Disable LASX & LSX & FPU */
+		clear_csr_euen(CSR_EUEN_FPEN | CSR_EUEN_LSXEN | CSR_EUEN_LASXEN);
+	} else if (vcpu->arch.aux_inuse & KVM_LARCH_LSX) {
+		kvm_save_lsx(&vcpu->arch.fpu);
+		vcpu->arch.aux_inuse &= ~(KVM_LARCH_LSX | KVM_LARCH_FPU);
+		trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_LSX);
+
+		/* Disable LSX & FPU */
+		clear_csr_euen(CSR_EUEN_FPEN | CSR_EUEN_LSXEN);
+	} else if (vcpu->arch.aux_inuse & KVM_LARCH_FPU) {
 		kvm_save_fpu(&vcpu->arch.fpu);
 		vcpu->arch.aux_inuse &= ~KVM_LARCH_FPU;
 		trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_FPU);
@@ -789,17 +1036,6 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	if (vcpu->arch.last_sched_cpu != cpu) {
-		kvm_debug("[%d->%d]KVM vCPU[%d] switch\n",
-				vcpu->arch.last_sched_cpu, cpu, vcpu->vcpu_id);
-		/*
-		 * Migrate the timer interrupt to the current CPU so that it
-		 * always interrupts the guest and synchronously triggers a
-		 * guest timer interrupt.
-		 */
-		kvm_migrate_count(vcpu);
-	}
-
 	/* Restore guest state to registers */
 	_kvm_vcpu_load(vcpu, cpu);
 	local_irq_restore(flags);
diff --git a/arch/loongarch/mm/kasan_init.c b/arch/loongarch/mm/kasan_init.c
index cc3e81fe0186..c608adc99845 100644
--- a/arch/loongarch/mm/kasan_init.c
+++ b/arch/loongarch/mm/kasan_init.c
@@ -44,6 +44,9 @@ void *kasan_mem_to_shadow(const void *addr)
 		unsigned long xrange = (maddr >> XRANGE_SHIFT) & 0xffff;
 		unsigned long offset = 0;
 
+		if (maddr >= FIXADDR_START)
+			return (void *)(kasan_early_shadow_page);
+
 		maddr &= XRANGE_SHADOW_MASK;
 		switch (xrange) {
 		case XKPRANGE_CC_SEG:
diff --git a/arch/loongarch/mm/tlb.c b/arch/loongarch/mm/tlb.c
index 2c0a411f23aa..0b95d32b30c9 100644
--- a/arch/loongarch/mm/tlb.c
+++ b/arch/loongarch/mm/tlb.c
@@ -284,12 +284,16 @@ static void setup_tlb_handler(int cpu)
 		set_handler(EXCCODE_TLBNR * VECSIZE, handle_tlb_protect, VECSIZE);
 		set_handler(EXCCODE_TLBNX * VECSIZE, handle_tlb_protect, VECSIZE);
 		set_handler(EXCCODE_TLBPE * VECSIZE, handle_tlb_protect, VECSIZE);
-	}
+	} else {
+		int vec_sz __maybe_unused;
+		void *addr __maybe_unused;
+		struct page *page __maybe_unused;
+
+		/* Avoid lockdep warning */
+		rcutree_report_cpu_starting(cpu);
+
 #ifdef CONFIG_NUMA
-	else {
-		void *addr;
-		struct page *page;
-		const int vec_sz = sizeof(exception_handlers);
+		vec_sz = sizeof(exception_handlers);
 
 		if (pcpu_handlers[cpu])
 			return;
@@ -305,8 +309,8 @@ static void setup_tlb_handler(int cpu)
 		csr_write64(pcpu_handlers[cpu], LOONGARCH_CSR_EENTRY);
 		csr_write64(pcpu_handlers[cpu], LOONGARCH_CSR_MERRENTRY);
 		csr_write64(pcpu_handlers[cpu] + 80*VECSIZE, LOONGARCH_CSR_TLBRENTRY);
-	}
 #endif
+	}
 }
 
 void tlb_init(int cpu)
diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c
index 4fcd6cd6da23..e73323d759d0 100644
--- a/arch/loongarch/net/bpf_jit.c
+++ b/arch/loongarch/net/bpf_jit.c
@@ -201,6 +201,11 @@ bool bpf_jit_supports_kfunc_call(void)
 	return true;
 }
 
+bool bpf_jit_supports_far_kfunc_call(void)
+{
+	return true;
+}
+
 /* initialized on the first pass of build_body() */
 static int out_offset = -1;
 static int emit_bpf_tail_call(struct jit_ctx *ctx)
@@ -465,7 +470,6 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 	const u8 dst = regmap[insn->dst_reg];
 	const s16 off = insn->off;
 	const s32 imm = insn->imm;
-	const u64 imm64 = (u64)(insn + 1)->imm << 32 | (u32)insn->imm;
 	const bool is32 = BPF_CLASS(insn->code) == BPF_ALU || BPF_CLASS(insn->code) == BPF_JMP32;
 
 	switch (code) {
@@ -923,8 +927,12 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 
 	/* dst = imm64 */
 	case BPF_LD | BPF_IMM | BPF_DW:
+	{
+		const u64 imm64 = (u64)(insn + 1)->imm << 32 | (u32)insn->imm;
+
 		move_imm(ctx, dst, imm64, is32);
 		return 1;
+	}
 
 	/* dst = *(size *)(src + off) */
 	case BPF_LDX | BPF_MEM | BPF_B:
diff --git a/arch/loongarch/vdso/Makefile b/arch/loongarch/vdso/Makefile
index c74c9921304f..f597cd08a96b 100644
--- a/arch/loongarch/vdso/Makefile
+++ b/arch/loongarch/vdso/Makefile
@@ -2,6 +2,7 @@
 # Objects to go into the VDSO.
 
 KASAN_SANITIZE := n
+UBSAN_SANITIZE := n
 KCOV_INSTRUMENT := n
 
 # Include the generic Makefile to check the built vdso.
diff --git a/arch/loongarch/vdso/vgettimeofday.c b/arch/loongarch/vdso/vgettimeofday.c
index 8f22863bd7ea..0885c1f3a89d 100644
--- a/arch/loongarch/vdso/vgettimeofday.c
+++ b/arch/loongarch/vdso/vgettimeofday.c
@@ -5,23 +5,18 @@
  * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
  */
 #include <linux/types.h>
+#include <vdso/gettime.h>
 
-extern
-int __vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts);
 int __vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts)
 {
 	return __cvdso_clock_gettime(clock, ts);
 }
 
-extern
-int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz);
 int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz)
 {
 	return __cvdso_gettimeofday(tv, tz);
 }
 
-extern
-int __vdso_clock_getres(clockid_t clock_id, struct __kernel_timespec *res);
 int __vdso_clock_getres(clockid_t clock_id, struct __kernel_timespec *res)
 {
 	return __cvdso_clock_getres(clock_id, res);
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index ad69b466a08b..9dcf245c9cbf 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -402,7 +402,7 @@ config ARCH_FORCE_MAX_ORDER
 	default "10"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 43e39040d3ac..0abcf994ce55 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -15,10 +15,10 @@
 KBUILD_DEFCONFIG := multi_defconfig
 
 ifdef cross_compiling
-	ifeq ($(CROSS_COMPILE),)
+    ifeq ($(CROSS_COMPILE),)
 		CROSS_COMPILE := $(call cc-cross-prefix, \
 			m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
-	endif
+    endif
 endif
 
 #
diff --git a/arch/m68k/coldfire/vectors.c b/arch/m68k/coldfire/vectors.c
index c26c255b530d..4321fd89d83e 100644
--- a/arch/m68k/coldfire/vectors.c
+++ b/arch/m68k/coldfire/vectors.c
@@ -12,14 +12,13 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/cpu.h>
 #include <asm/traps.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfwdebug.h>
 
-#include "vectors.h"
-
 /***************************************************************************/
 
 #ifdef TRAP_DBG_INTERRUPT
diff --git a/arch/m68k/coldfire/vectors.h b/arch/m68k/coldfire/vectors.h
deleted file mode 100644
index 0b01450a4353..000000000000
--- a/arch/m68k/coldfire/vectors.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-void trap_init(void);
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 7e6b74b6eecd..b4d71fea558f 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -453,6 +453,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -550,7 +551,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 0b403e2efcd5..682d8cd3dd3c 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -410,6 +410,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -507,7 +508,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 57aac3f4b001..15259ced8463 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -430,6 +430,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -527,7 +528,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index 3c160636a2e9..7395c12caef6 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -402,6 +402,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -499,7 +500,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 23cf07c49d14..92506bc7f78d 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -412,6 +412,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -509,7 +510,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 619a0d93ce5b..144bc8c0d8b5 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -269,9 +269,6 @@ CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
 CONFIG_6LOWPAN=m
 CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
 CONFIG_6LOWPAN_GHC_UDP=m
@@ -432,6 +429,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -529,7 +527,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index d9430bc2b2de..07594c729497 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -289,9 +289,6 @@ CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
 CONFIG_6LOWPAN=m
 CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
 CONFIG_6LOWPAN_GHC_UDP=m
@@ -518,6 +515,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -615,7 +613,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index eb6132f29bf5..c34de6c1de20 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -401,6 +401,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -498,7 +499,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index d0bad674cbb7..83bc029d1f33 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -402,6 +402,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -499,7 +500,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index dad6bcfcaeed..4f551dac2ed7 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -419,6 +419,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -516,7 +517,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index eb1b489b3139..b1bf01182bd3 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -400,6 +400,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -497,7 +498,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 939589826546..5c9a3f71f036 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -400,6 +400,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -497,7 +498,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git a/arch/m68k/emu/nfcon.c b/arch/m68k/emu/nfcon.c
index 3a74d493eb3e..17b2987c2bf5 100644
--- a/arch/m68k/emu/nfcon.c
+++ b/arch/m68k/emu/nfcon.c
@@ -23,9 +23,9 @@ static int stderr_id;
 static struct tty_port nfcon_tty_port;
 static struct tty_driver *nfcon_tty_driver;
 
-static void nfputs(const char *str, unsigned int count)
+static void nfputs(const u8 *str, size_t count)
 {
-	char buf[68];
+	u8 buf[68];
 	unsigned long phys = virt_to_phys(buf);
 
 	buf[64] = 0;
diff --git a/arch/m68k/include/asm/cacheflush_mm.h b/arch/m68k/include/asm/cacheflush_mm.h
index ed12358c4783..9a71b0148461 100644
--- a/arch/m68k/include/asm/cacheflush_mm.h
+++ b/arch/m68k/include/asm/cacheflush_mm.h
@@ -191,6 +191,7 @@ extern void cache_push_v(unsigned long vaddr, int len);
 #define flush_cache_all() __flush_cache_all()
 
 #define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
 static inline void flush_cache_mm(struct mm_struct *mm)
diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h
index 47525f2a57e1..090aec54b8fa 100644
--- a/arch/m68k/include/asm/io_mm.h
+++ b/arch/m68k/include/asm/io_mm.h
@@ -389,12 +389,6 @@ static inline void isa_delay(void)
 
 #define __ARCH_HAS_NO_PAGE_ZERO_MAPPED		1
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
 #define readb_relaxed(addr)	readb(addr)
 #define readw_relaxed(addr)	readw(addr)
 #define readl_relaxed(addr)	readl(addr)
diff --git a/arch/m68k/include/asm/kmap.h b/arch/m68k/include/asm/kmap.h
index 4efb3efa593a..b778f015c917 100644
--- a/arch/m68k/include/asm/kmap.h
+++ b/arch/m68k/include/asm/kmap.h
@@ -25,7 +25,6 @@ static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
 	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
 }
 
-#define ioremap_uc ioremap
 #define ioremap_wt ioremap_wt
 static inline void __iomem *ioremap_wt(unsigned long physaddr,
 				       unsigned long size)
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index 7a2da780830b..8f2676c3a988 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -8,6 +8,7 @@
 #ifndef __ASM_M68K_PROCESSOR_H
 #define __ASM_M68K_PROCESSOR_H
 
+#include <linux/preempt.h>
 #include <linux/thread_info.h>
 #include <asm/fpu.h>
 #include <asm/ptrace.h>
diff --git a/arch/m68k/kernel/syscalls/syscall.tbl b/arch/m68k/kernel/syscalls/syscall.tbl
index 7a4b780e82cb..7fd43fd4c9f2 100644
--- a/arch/m68k/kernel/syscalls/syscall.tbl
+++ b/arch/m68k/kernel/syscalls/syscall.tbl
@@ -456,3 +456,8 @@
 454	common	futex_wake			sys_futex_wake
 455	common	futex_wait			sys_futex_wait
 456	common	futex_requeue			sys_futex_requeue
+457	common	statmount			sys_statmount
+458	common	listmount			sys_listmount
+459	common	lsm_get_self_attr		sys_lsm_get_self_attr
+460	common	lsm_set_self_attr		sys_lsm_set_self_attr
+461	common	lsm_list_modules		sys_lsm_list_modules
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
index 7b2d7f6f23c0..4da7bc4ac4a3 100644
--- a/arch/microblaze/configs/mmu_defconfig
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -3,11 +3,9 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_EXPERT=y
 # CONFIG_BASE_FULL is not set
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EXPERT=y
 CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
 CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
 CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
@@ -20,7 +18,6 @@ CONFIG_CMDLINE_FORCE=y
 CONFIG_HIGHMEM=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_CMA=y
@@ -28,6 +25,10 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 # CONFIG_IPV6 is not set
 CONFIG_BRIDGE=m
 CONFIG_PCI=y
@@ -43,6 +44,7 @@ CONFIG_NETDEVICES=y
 CONFIG_XILINX_EMACLITE=y
 CONFIG_XILINX_AXI_EMAC=y
 CONFIG_XILINX_LL_TEMAC=y
+CONFIG_MARVELL_PHY=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
@@ -77,14 +79,13 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 CONFIG_CIFS=y
-CONFIG_CIFS_STATS2=y
 CONFIG_ENCRYPTED_KEYS=y
 CONFIG_DMA_CMA=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_KGDB=y
 CONFIG_KGDB_TESTS=y
 CONFIG_KGDB_KDB=y
-CONFIG_DEBUG_SLAB=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_SPINLOCK=y
diff --git a/arch/microblaze/include/asm/ftrace.h b/arch/microblaze/include/asm/ftrace.h
index 6a92bed37794..4ca38b92a3a2 100644
--- a/arch/microblaze/include/asm/ftrace.h
+++ b/arch/microblaze/include/asm/ftrace.h
@@ -10,6 +10,7 @@
 #ifndef __ASSEMBLY__
 extern void _mcount(void);
 extern void ftrace_call_graph(void);
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr);
 #endif
 
 #ifdef CONFIG_DYNAMIC_FTRACE
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index 3042eb98bb56..e4ea2ec3642f 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -336,6 +336,7 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
 }
 
 #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+struct vm_area_struct;
 static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
 		unsigned long address, pte_t *ptep)
 {
diff --git a/arch/microblaze/kernel/syscalls/syscall.tbl b/arch/microblaze/kernel/syscalls/syscall.tbl
index 5b6a0b02b7de..b00ab2cabab9 100644
--- a/arch/microblaze/kernel/syscalls/syscall.tbl
+++ b/arch/microblaze/kernel/syscalls/syscall.tbl
@@ -462,3 +462,8 @@
 454	common	futex_wake			sys_futex_wake
 455	common	futex_wait			sys_futex_wait
 456	common	futex_requeue			sys_futex_requeue
+457	common	statmount			sys_statmount
+458	common	listmount			sys_listmount
+459	common	lsm_get_self_attr		sys_lsm_get_self_attr
+460	common	lsm_set_self_attr		sys_lsm_set_self_attr
+461	common	lsm_list_modules		sys_lsm_list_modules
diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c
index 94b6fe93147d..080aa769218d 100644
--- a/arch/microblaze/kernel/traps.c
+++ b/arch/microblaze/kernel/traps.c
@@ -8,6 +8,7 @@
  * for more details.
  */
 
+#include <linux/cpu.h>
 #include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/kallsyms.h>
diff --git a/arch/mips/Kbuild b/arch/mips/Kbuild
index af2967bffb73..e2d623621a00 100644
--- a/arch/mips/Kbuild
+++ b/arch/mips/Kbuild
@@ -1,10 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-# Fail on warnings - also for files referenced in subdirs
-# -Werror can be disabled for specific files using:
-# CFLAGS_<file.o> := -Wno-error
-ifeq ($(W),)
-subdir-ccflags-y := -Werror
-endif
 
 # platform specific definitions
 include $(srctree)/arch/mips/Kbuild.platforms
diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c
index b13d8adf3be4..20d30f6265cd 100644
--- a/arch/mips/alchemy/common/prom.c
+++ b/arch/mips/alchemy/common/prom.c
@@ -40,6 +40,7 @@
 #include <linux/string.h>
 
 #include <asm/bootinfo.h>
+#include <prom.h>
 
 int prom_argc;
 char **prom_argv;
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 2388d68786f4..a7a6d31a7a41 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -30,13 +30,11 @@
 #include <linux/mm.h>
 #include <linux/dma-map-ops.h> /* for dma_default_coherent */
 
+#include <asm/bootinfo.h>
 #include <asm/mipsregs.h>
 
 #include <au1000.h>
 
-extern void __init board_setup(void);
-extern void __init alchemy_set_lpj(void);
-
 static bool alchemy_dma_coherent(void)
 {
 	switch (alchemy_get_cputype()) {
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index f521874ebb07..67f067706af2 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -847,7 +847,7 @@ int __init db1200_dev_setup(void)
 	i2c_register_board_info(0, db1200_i2c_devs,
 				ARRAY_SIZE(db1200_i2c_devs));
 	spi_register_board_info(db1200_spi_devs,
-				ARRAY_SIZE(db1200_i2c_devs));
+				ARRAY_SIZE(db1200_spi_devs));
 
 	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C	 ON=SPI)
 	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c
index fd91d9c9a252..6c6837181f55 100644
--- a/arch/mips/alchemy/devboards/db1550.c
+++ b/arch/mips/alchemy/devboards/db1550.c
@@ -589,7 +589,7 @@ int __init db1550_dev_setup(void)
 	i2c_register_board_info(0, db1550_i2c_devs,
 				ARRAY_SIZE(db1550_i2c_devs));
 	spi_register_board_info(db1550_spi_devs,
-				ARRAY_SIZE(db1550_i2c_devs));
+				ARRAY_SIZE(db1550_spi_devs));
 
 	c = clk_get(NULL, "psc0_intclk");
 	if (!IS_ERR(c)) {
diff --git a/arch/mips/bcm47xx/buttons.c b/arch/mips/bcm47xx/buttons.c
index 437a737c01dd..46994f9bb821 100644
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -147,21 +147,21 @@ static const struct gpio_keys_button
 bcm47xx_buttons_buffalo_whr_g125[] __initconst = {
 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
 	BCM47XX_GPIO_KEY(4, KEY_RESTART),
-	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode switch */
 };
 
 static const struct gpio_keys_button
 bcm47xx_buttons_buffalo_whr_g54s[] __initconst = {
 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
 	BCM47XX_GPIO_KEY_H(4, KEY_RESTART),
-	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode switch */
 };
 
 static const struct gpio_keys_button
 bcm47xx_buttons_buffalo_whr_hp_g54[] __initconst = {
 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
 	BCM47XX_GPIO_KEY(4, KEY_RESTART),
-	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode switch */
 };
 
 static const struct gpio_keys_button
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 01aff80a5967..99f321b6e417 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -702,7 +702,7 @@ static struct ssb_sprom bcm63xx_sprom = {
 	.boardflags_hi		= 0x0000,
 };
 
-int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+static int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
 {
 	if (bus->bustype == SSB_BUSTYPE_PCI) {
 		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 86a6e2590866..3144965fb7dc 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -174,7 +174,7 @@ static void enetsw_set(struct clk *clk, int enable)
 	}
 
 	if (enable) {
-		/* reset switch core afer clock change */
+		/* reset switch core after clock change */
 		bcm63xx_core_set_reset(BCM63XX_RESET_ENETSW, 1);
 		msleep(10);
 		bcm63xx_core_set_reset(BCM63XX_RESET_ENETSW, 0);
@@ -304,7 +304,7 @@ static void xtm_set(struct clk *clk, int enable)
 	bcm_hwclock_set(CKCTL_6368_SAR_EN, enable);
 
 	if (enable) {
-		/* reset sar core afer clock change */
+		/* reset sar core after clock change */
 		bcm63xx_core_set_reset(BCM63XX_RESET_SAR, 1);
 		mdelay(1);
 		bcm63xx_core_set_reset(BCM63XX_RESET_SAR, 0);
diff --git a/arch/mips/bcm63xx/dev-rng.c b/arch/mips/bcm63xx/dev-rng.c
index d277b4dc6c68..f94151f7c96f 100644
--- a/arch/mips/bcm63xx/dev-rng.c
+++ b/arch/mips/bcm63xx/dev-rng.c
@@ -26,7 +26,7 @@ static struct platform_device bcm63xx_rng_device = {
 	.resource	= rng_resources,
 };
 
-int __init bcm63xx_rng_register(void)
+static int __init bcm63xx_rng_register(void)
 {
 	if (!BCMCPU_IS_6368())
 		return -ENODEV;
diff --git a/arch/mips/bcm63xx/dev-uart.c b/arch/mips/bcm63xx/dev-uart.c
index 3bc7f3bfc9ad..5d6bf0445b29 100644
--- a/arch/mips/bcm63xx/dev-uart.c
+++ b/arch/mips/bcm63xx/dev-uart.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_uart.h>
 
 static struct resource uart0_resources[] = {
 	{
diff --git a/arch/mips/bcm63xx/dev-wdt.c b/arch/mips/bcm63xx/dev-wdt.c
index 42130914a3c2..302bf7ed5ad5 100644
--- a/arch/mips/bcm63xx/dev-wdt.c
+++ b/arch/mips/bcm63xx/dev-wdt.c
@@ -34,7 +34,7 @@ static struct platform_device bcm63xx_wdt_device = {
 	},
 };
 
-int __init bcm63xx_wdt_register(void)
+static int __init bcm63xx_wdt_register(void)
 {
 	wdt_resources[0].start = bcm63xx_regset_address(RSET_WDT);
 	wdt_resources[0].end = wdt_resources[0].start;
diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c
index 2548013442f6..6240a8f88ea3 100644
--- a/arch/mips/bcm63xx/irq.c
+++ b/arch/mips/bcm63xx/irq.c
@@ -72,7 +72,7 @@ static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
  */
 
 #define BUILD_IPIC_INTERNAL(width)					\
-void __dispatch_internal_##width(int cpu)				\
+static void __dispatch_internal_##width(int cpu)			\
 {									\
 	u32 pending[width / 32];					\
 	unsigned int src, tgt;						\
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
index d811e3e03f81..c13ddb544a23 100644
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -159,7 +159,7 @@ void __init plat_mem_setup(void)
 	board_setup();
 }
 
-int __init bcm63xx_register_devices(void)
+static int __init bcm63xx_register_devices(void)
 {
 	/* register gpiochip */
 	bcm63xx_gpio_init();
diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c
index a86065854c0c..74b83807df30 100644
--- a/arch/mips/bcm63xx/timer.c
+++ b/arch/mips/bcm63xx/timer.c
@@ -178,7 +178,7 @@ int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us)
 
 EXPORT_SYMBOL(bcm63xx_timer_set);
 
-int bcm63xx_timer_init(void)
+static int bcm63xx_timer_init(void)
 {
 	int ret, irq;
 	u32 reg;
diff --git a/arch/mips/boot/compressed/dbg.c b/arch/mips/boot/compressed/dbg.c
index f6728a8fd1c3..95405292accd 100644
--- a/arch/mips/boot/compressed/dbg.c
+++ b/arch/mips/boot/compressed/dbg.c
@@ -3,12 +3,14 @@
  * MIPS-specific debug support for pre-boot environment
  *
  * NOTE: putc() is board specific, if your board have a 16550 compatible uart,
- * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. othewise, you
+ * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. otherwise, you
  * need to implement your own putc().
  */
 #include <linux/compiler.h>
 #include <linux/types.h>
 
+#include "decompress.h"
+
 void __weak putc(char c)
 {
 }
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index c5dd415254d3..adb6d5b0e6eb 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -19,6 +19,8 @@
 #include <asm/unaligned.h>
 #include <asm-generic/vmlinux.lds.h>
 
+#include "decompress.h"
+
 /*
  * These two variables specify the free mem region
  * that can be used for temporary malloc area
@@ -26,20 +28,6 @@
 unsigned long free_mem_ptr;
 unsigned long free_mem_end_ptr;
 
-/* The linker tells us where the image is. */
-extern unsigned char __image_begin[], __image_end[];
-
-/* debug interfaces  */
-#ifdef CONFIG_DEBUG_ZBOOT
-extern void puts(const char *s);
-extern void puthex(unsigned long long val);
-#else
-#define puts(s) do {} while (0)
-#define puthex(val) do {} while (0)
-#endif
-
-extern char __appended_dtb[];
-
 void error(char *x)
 {
 	puts("\n\n");
diff --git a/arch/mips/boot/compressed/decompress.h b/arch/mips/boot/compressed/decompress.h
new file mode 100644
index 000000000000..073b64593b3d
--- /dev/null
+++ b/arch/mips/boot/compressed/decompress.h
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+#ifndef _DECOMPRESSOR_H
+#define _DECOMPRESSOR_H
+
+/* The linker tells us where the image is. */
+extern unsigned char __image_begin[], __image_end[];
+
+/* debug interfaces  */
+#ifdef CONFIG_DEBUG_ZBOOT
+extern void putc(char c);
+extern void puts(const char *s);
+extern void puthex(unsigned long long val);
+#else
+#define putc(s) do {} while (0)
+#define puts(s) do {} while (0)
+#define puthex(val) do {} while (0)
+#endif
+
+extern char __appended_dtb[];
+
+void error(char *x);
+void decompress_kernel(unsigned long boot_heap_start);
+
+#endif
diff --git a/arch/mips/boot/compressed/head.S b/arch/mips/boot/compressed/head.S
index 5795d0af1e1b..d237a834b85e 100644
--- a/arch/mips/boot/compressed/head.S
+++ b/arch/mips/boot/compressed/head.S
@@ -25,8 +25,8 @@
 	/* Clear BSS */
 	PTR_LA	a0, _edata
 	PTR_LA	a2, _end
-1:	sw	zero, 0(a0)
-	addiu	a0, a0, 4
+1:	PTR_S	zero, 0(a0)
+	PTR_ADDIU a0, a0, PTRSIZE
 	bne	a2, a0, 1b
 
 	PTR_LA	a0, (.heap)	     /* heap address */
diff --git a/arch/mips/boot/compressed/string.c b/arch/mips/boot/compressed/string.c
index 0b593b709228..f0eb251e44e5 100644
--- a/arch/mips/boot/compressed/string.c
+++ b/arch/mips/boot/compressed/string.c
@@ -7,6 +7,7 @@
 
 #include <linux/compiler_attributes.h>
 #include <linux/types.h>
+#include <asm/string.h>
 
 void *memcpy(void *dest, const void *src, size_t n)
 {
diff --git a/arch/mips/boot/elf2ecoff.c b/arch/mips/boot/elf2ecoff.c
index 6972b97235da..549c5d6ef6d7 100644
--- a/arch/mips/boot/elf2ecoff.c
+++ b/arch/mips/boot/elf2ecoff.c
@@ -443,7 +443,7 @@ int main(int argc, char *argv[])
 	efh.f_symptr = 0;
 	efh.f_nsyms = 0;
 	efh.f_opthdr = sizeof eah;
-	efh.f_flags = 0x100f;	/* Stripped, not sharable. */
+	efh.f_flags = 0x100f;	/* Stripped, not shareable. */
 
 	memset(esecs, 0, sizeof esecs);
 	strcpy(esecs[0].s_name, ".text");
diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index 124817609ce0..af62a210a40b 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -113,7 +113,7 @@ static struct clocksource clocksource_mips = {
 
 unsigned long long notrace sched_clock(void)
 {
-	/* 64-bit arithmatic can overflow, so use 128-bit.  */
+	/* 64-bit arithmetic can overflow, so use 128-bit.  */
 	u64 t1, t2, t3;
 	unsigned long long rv;
 	u64 mult = clocksource_mips.mult;
diff --git a/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c b/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c
index b7019d21808e..76446db66def 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c
@@ -143,7 +143,7 @@ static void cvmx_boot_vector_init(void *mem)
 		uint64_t v = _cvmx_bootvector_data[i];
 
 		if (OCTEON_IS_OCTEON1PLUS() && (i == 0 || i == 7))
-			v &= 0xffffffff00000000ull; /* KScratch not availble. */
+			v &= 0xffffffff00000000ull; /* KScratch not available */
 		cvmx_write_csr(CVMX_MIO_BOOT_LOC_ADR, i * 8);
 		cvmx_write_csr(CVMX_MIO_BOOT_LOC_DAT, v);
 	}
diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
index 334bf8e577e5..628ebdf4b9c5 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
@@ -264,7 +264,7 @@ int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min,
 	 * Convert !0 address_min and 0 address_max to special case of
 	 * range that specifies an exact memory block to allocate.  Do
 	 * this before other checks and adjustments so that this
-	 * tranformation will be validated.
+	 * transformation will be validated.
 	 */
 	if (address_min && !address_max)
 		address_max = address_min + req_size;
diff --git a/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c b/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c
index aa7bbf8d0df5..042a6bc44b5c 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c
@@ -192,7 +192,7 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id,
 }
 
 /*
- * Shutdown a queue a free it's command buffers to the FPA. The
+ * Shutdown a queue and free its command buffers to the FPA. The
  * hardware connected to the queue must be stopped before this
  * function is called.
  *
@@ -285,7 +285,7 @@ int cvmx_cmd_queue_length(cvmx_cmd_queue_id_t queue_id)
 
 /*
  * Return the command buffer to be written to. The purpose of this
- * function is to allow CVMX routine access t othe low level buffer
+ * function is to allow CVMX routine access to the low level buffer
  * for initial hardware setup. User applications should not call this
  * function directly.
  *
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
index 607b4e659579..1fceb7fd2c94 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
@@ -103,7 +103,7 @@ uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data)
 /**
  * Shift long sequences of zeros into the QLM JTAG chain. It is
  * common to need to shift more than 32 bits of zeros into the
- * chain. This function is a convience wrapper around
+ * chain. This function is a convenience wrapper around
  * cvmx_helper_qlm_jtag_shift() to shift more than 32 bits of
  * zeros at a time.
  *
diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c
index 15faca494c80..6e70b859a0ac 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-pko.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c
@@ -615,7 +615,7 @@ int cvmx_pko_rate_limit_bits(int port, uint64_t bits_s, int burst)
 	/*
 	 * Each packet has a 12 bytes of interframe gap, an 8 byte
 	 * preamble, and a 4 byte CRC. These are not included in the
-	 * per word count. Multiply by 8 to covert to bits and divide
+	 * per word count. Multiply by 8 to convert to bits and divide
 	 * by 256 for limit granularity.
 	 */
 	pko_mem_port_rate0.s.rate_pkt = (12 + 8 + 4) * 8 * tokens_per_bit / 256;
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index f76783c24338..5e1dd4e6e82f 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -973,7 +973,7 @@ int __init octeon_prune_device_tree(void)
 			 * zero.
 			 */
 
-			/* Asume that CS1 immediately follows. */
+			/* Assume that CS1 immediately follows. */
 			mio_boot_reg_cfg.u64 =
 				cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs + 1));
 			region1_base = mio_boot_reg_cfg.s.base << 16;
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index 2e099d55a564..9a266bf78339 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -23,9 +23,6 @@
 
 #include <cobalt.h>
 
-extern void cobalt_machine_restart(char *command);
-extern void cobalt_machine_halt(void);
-
 const char *get_system_type(void)
 {
 	switch (cobalt_board_id) {
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index dc49b09d492b..e22e8b825903 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -173,7 +173,6 @@ CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index b51f738a39a0..4714074c8bd7 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -287,7 +287,8 @@ CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_FUSE_FS=m
 CONFIG_CUSE=m
-CONFIG_FSCACHE=m
+CONFIG_NETFS_SUPPORT=m
+CONFIG_FSCACHE=y
 CONFIG_FSCACHE_STATS=y
 CONFIG_CACHEFILES=m
 CONFIG_PROC_KCORE=y
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index 38f17b658421..3389e6e885d9 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -238,7 +238,8 @@ CONFIG_BTRFS_FS=m
 CONFIG_QUOTA=y
 CONFIG_QFMT_V2=m
 CONFIG_AUTOFS_FS=m
-CONFIG_FSCACHE=m
+CONFIG_NETFS_SUPPORT=m
+CONFIG_FSCACHE=y
 CONFIG_CACHEFILES=m
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 07839a4b397e..78f498752066 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -356,7 +356,8 @@ CONFIG_QFMT_V2=m
 CONFIG_AUTOFS_FS=y
 CONFIG_FUSE_FS=m
 CONFIG_VIRTIO_FS=m
-CONFIG_FSCACHE=m
+CONFIG_NETFS_SUPPORT=m
+CONFIG_FSCACHE=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_MSDOS_FS=m
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 6f8046024557..4390d30206d9 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -202,7 +202,6 @@ CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
diff --git a/arch/mips/configs/malta_kvm_defconfig b/arch/mips/configs/malta_kvm_defconfig
index 16a91eeff67f..d63d8be8cb50 100644
--- a/arch/mips/configs/malta_kvm_defconfig
+++ b/arch/mips/configs/malta_kvm_defconfig
@@ -206,7 +206,6 @@ CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
diff --git a/arch/mips/configs/maltaup_xpa_defconfig b/arch/mips/configs/maltaup_xpa_defconfig
index 264aba29ea4f..338bb6544a93 100644
--- a/arch/mips/configs/maltaup_xpa_defconfig
+++ b/arch/mips/configs/maltaup_xpa_defconfig
@@ -203,7 +203,6 @@ CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
diff --git a/arch/mips/configs/pic32mzda_defconfig b/arch/mips/configs/pic32mzda_defconfig
index 166d2ad372d1..54774f90c23e 100644
--- a/arch/mips/configs/pic32mzda_defconfig
+++ b/arch/mips/configs/pic32mzda_defconfig
@@ -68,7 +68,8 @@ CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_FUSE_FS=m
-CONFIG_FSCACHE=m
+CONFIG_NETFS_SUPPORT=m
+CONFIG_FSCACHE=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
index 02ec6c1a5116..517f1b060bf4 100644
--- a/arch/mips/configs/rb532_defconfig
+++ b/arch/mips/configs/rb532_defconfig
@@ -96,7 +96,6 @@ CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_HAMRADIO=y
 CONFIG_MTD=y
diff --git a/arch/mips/fw/arc/memory.c b/arch/mips/fw/arc/memory.c
index 66188739f54d..fb78e6fd5de4 100644
--- a/arch/mips/fw/arc/memory.c
+++ b/arch/mips/fw/arc/memory.c
@@ -37,7 +37,7 @@ static unsigned int nr_prom_mem __initdata;
  */
 #define ARC_PAGE_SHIFT	12
 
-struct linux_mdesc * __init ArcGetMemoryDescriptor(struct linux_mdesc *Current)
+static struct linux_mdesc * __init ArcGetMemoryDescriptor(struct linux_mdesc *Current)
 {
 	return (struct linux_mdesc *) ARC_CALL1(get_mdesc, Current);
 }
diff --git a/arch/mips/fw/arc/promlib.c b/arch/mips/fw/arc/promlib.c
index 5e9e840a9314..93e1e70393ee 100644
--- a/arch/mips/fw/arc/promlib.c
+++ b/arch/mips/fw/arc/promlib.c
@@ -15,11 +15,11 @@
 /*
  * For 64bit kernels working with a 32bit ARC PROM pointer arguments
  * for ARC calls need to reside in CKEG0/1. But as soon as the kernel
- * switches to it's first kernel thread stack is set to an address in
+ * switches to its first kernel thread stack is set to an address in
  * XKPHYS, so anything on stack can't be used anymore. This is solved
- * by using a * static declartion variables are put into BSS, which is
+ * by using a * static declaration variables are put into BSS, which is
  * linked to a CKSEG0 address. Since this is only used on UP platforms
- * there is not spinlock needed
+ * there is no spinlock needed
  */
 #define O32_STATIC	static
 #else
diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h
index 3424a7908c0f..8b08db3fb17a 100644
--- a/arch/mips/include/asm/cache.h
+++ b/arch/mips/include/asm/cache.h
@@ -17,5 +17,11 @@
 #define __read_mostly __section(".data..read_mostly")
 
 extern void cache_noop(void);
+extern void r3k_cache_init(void);
+extern unsigned long r3k_cache_size(unsigned long);
+extern unsigned long r3k_cache_lsize(unsigned long);
+extern void r4k_cache_init(void);
+extern void octeon_cache_init(void);
+extern void au1x00_fixup_config_od(void);
 
 #endif /* _ASM_CACHE_H */
diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h
index f36c2519ed97..1f14132b3fc9 100644
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -97,6 +97,8 @@ static inline void flush_cache_vmap(unsigned long start, unsigned long end)
 		__flush_cache_vmap();
 }
 
+#define flush_cache_vmap_early(start, end)     do { } while (0)
+
 extern void (*__flush_cache_vunmap)(void);
 
 static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h
index 4044eaf989ac..0921ddda11a4 100644
--- a/arch/mips/include/asm/checksum.h
+++ b/arch/mips/include/asm/checksum.h
@@ -241,7 +241,8 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 	"	.set	pop"
 	: "=&r" (sum), "=&r" (tmp)
 	: "r" (saddr), "r" (daddr),
-	  "0" (htonl(len)), "r" (htonl(proto)), "r" (sum));
+	  "0" (htonl(len)), "r" (htonl(proto)), "r" (sum)
+	: "memory");
 
 	return csum_fold(sum);
 }
diff --git a/arch/mips/include/asm/debug.h b/arch/mips/include/asm/debug.h
index c7013e1cb53f..e70392429246 100644
--- a/arch/mips/include/asm/debug.h
+++ b/arch/mips/include/asm/debug.h
@@ -10,7 +10,7 @@
 
 /*
  * mips_debugfs_dir corresponds to the "mips" directory at the top level
- * of the DebugFS hierarchy. MIPS-specific DebugFS entires should be
+ * of the DebugFS hierarchy. MIPS-specific DebugFS entries should be
  * placed beneath this directory.
  */
 extern struct dentry *mips_debugfs_dir;
diff --git a/arch/mips/include/asm/dmi.h b/arch/mips/include/asm/dmi.h
index 27415a288adf..dc397f630c66 100644
--- a/arch/mips/include/asm/dmi.h
+++ b/arch/mips/include/asm/dmi.h
@@ -5,7 +5,7 @@
 #include <linux/io.h>
 #include <linux/memblock.h>
 
-#define dmi_early_remap(x, l)		ioremap_cache(x, l)
+#define dmi_early_remap(x, l)		ioremap(x, l)
 #define dmi_early_unmap(x, l)		iounmap(x)
 #define dmi_remap(x, l)			ioremap_cache(x, l)
 #define dmi_unmap(x)			iounmap(x)
diff --git a/arch/mips/include/asm/ftrace.h b/arch/mips/include/asm/ftrace.h
index db497a8167da..dc025888f6d2 100644
--- a/arch/mips/include/asm/ftrace.h
+++ b/arch/mips/include/asm/ftrace.h
@@ -85,6 +85,10 @@ struct dyn_arch_ftrace {
 };
 
 #endif /*  CONFIG_DYNAMIC_FTRACE */
+
+void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
+			   unsigned long fp);
+
 #endif /* __ASSEMBLY__ */
 #endif /* CONFIG_FUNCTION_TRACER */
 #endif /* _ASM_MIPS_FTRACE_H */
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 062dd4e6b954..af58d6ae06b8 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -13,7 +13,6 @@
 #define _ASM_IO_H
 
 #include <linux/compiler.h>
-#include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/irqflags.h>
 
@@ -25,7 +24,6 @@
 #include <asm/cpu-features.h>
 #include <asm/page.h>
 #include <asm/pgtable-bits.h>
-#include <asm/processor.h>
 #include <asm/string.h>
 #include <mangle-port.h>
 
@@ -41,6 +39,11 @@
 # define __raw_ioswabq(a, x)	(x)
 # define ____raw_ioswabq(a, x)	(x)
 
+# define _ioswabb ioswabb
+# define _ioswabw ioswabw
+# define _ioswabl ioswabl
+# define _ioswabq ioswabq
+
 # define __relaxed_ioswabb ioswabb
 # define __relaxed_ioswabw ioswabw
 # define __relaxed_ioswabl ioswabl
@@ -115,23 +118,6 @@ static inline phys_addr_t virt_to_phys(const volatile void *x)
 }
 
 /*
- *     phys_to_virt    -       map physical address to virtual
- *     @address: address to remap
- *
- *     The returned virtual address is a current CPU mapping for
- *     the memory address given. It is only valid to use this function on
- *     addresses that have a kernel mapping
- *
- *     This function does not handle bus mappings for DMA transfers. In
- *     almost all conceivable cases a device driver should not be using
- *     this function
- */
-static inline void * phys_to_virt(unsigned long address)
-{
-	return __va(address);
-}
-
-/*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
  */
 static inline unsigned long isa_virt_to_bus(volatile void *address)
@@ -139,11 +125,6 @@ static inline unsigned long isa_virt_to_bus(volatile void *address)
 	return virt_to_phys(address);
 }
 
-static inline void *isa_bus_to_virt(unsigned long address)
-{
-	return phys_to_virt(address);
-}
-
 /*
  * Change "struct page" to physical address.
  */
@@ -166,7 +147,6 @@ void iounmap(const volatile void __iomem *addr);
  */
 #define ioremap(offset, size)						\
 	ioremap_prot((offset), (size), _CACHE_UNCACHED)
-#define ioremap_uc		ioremap
 
 /*
  * ioremap_cache -	map bus memory into CPU space
@@ -179,7 +159,7 @@ void iounmap(const volatile void __iomem *addr);
  * address is not guaranteed to be usable directly as a virtual
  * address.
  *
- * This version of ioremap ensures that the memory is marked cachable by
+ * This version of ioremap ensures that the memory is marked cacheable by
  * the CPU.  Also enables full write-combining.	 Useful for some
  * memory-like regions on I/O busses.
  */
@@ -197,7 +177,7 @@ void iounmap(const volatile void __iomem *addr);
  * address is not guaranteed to be usable directly as a virtual
  * address.
  *
- * This version of ioremap ensures that the memory is marked uncachable
+ * This version of ioremap ensures that the memory is marked uncacheable
  * but accelerated by means of write-combining feature. It is specifically
  * useful for PCIe prefetchable windows, which may vastly improve a
  * communications performance. If it was determined on boot stage, what
@@ -207,8 +187,6 @@ void iounmap(const volatile void __iomem *addr);
 #define ioremap_wc(offset, size)					\
 	ioremap_prot((offset), (size), boot_cpu_data.writecombine)
 
-#include <asm-generic/iomap.h>
-
 #if defined(CONFIG_CPU_CAVIUM_OCTEON)
 #define war_io_reorder_wmb()		wmb()
 #else
@@ -296,9 +274,9 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem)	\
 	return pfx##ioswab##bwlq(__mem, __val);				\
 }
 
-#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, barrier, relax, p)	\
+#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, barrier, relax)		\
 									\
-static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
+static inline void pfx##out##bwlq(type val, unsigned long port)		\
 {									\
 	volatile type *__addr;						\
 	type __val;							\
@@ -318,7 +296,7 @@ static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
 	*__addr = __val;						\
 }									\
 									\
-static inline type pfx##in##bwlq##p(unsigned long port)			\
+static inline type pfx##in##bwlq(unsigned long port)			\
 {									\
 	volatile type *__addr;						\
 	type __val;							\
@@ -360,11 +338,10 @@ __BUILD_MEMORY_PFX(__mem_, q, u64, 0)
 #endif
 
 #define __BUILD_IOPORT_PFX(bus, bwlq, type)				\
-	__BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0,)			\
-	__BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0, _p)
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0)
 
 #define BUILDIO_IOPORT(bwlq, type)					\
-	__BUILD_IOPORT_PFX(, bwlq, type)				\
+	__BUILD_IOPORT_PFX(_, bwlq, type)				\
 	__BUILD_IOPORT_PFX(__mem_, bwlq, type)
 
 BUILDIO_IOPORT(b, u8)
@@ -412,14 +389,6 @@ __BUILDIO(q, u64)
 #define writeq_be(val, addr)						\
 	__raw_writeq(cpu_to_be64((val)), (__force unsigned *)(addr))
 
-/*
- * Some code tests for these symbols
- */
-#ifdef CONFIG_64BIT
-#define readq				readq
-#define writeq				writeq
-#endif
-
 #define __BUILD_MEMORY_STRING(bwlq, type)				\
 									\
 static inline void writes##bwlq(volatile void __iomem *mem,		\
@@ -480,18 +449,6 @@ BUILDSTRING(l, u32)
 BUILDSTRING(q, u64)
 #endif
 
-static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
-{
-	memset((void __force *) addr, val, count);
-}
-static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
-{
-	memcpy(dst, (void __force *) src, count);
-}
-static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
-{
-	memcpy((void __force *) dst, src, count);
-}
 
 /*
  * The caches on some architectures aren't dma-coherent and have need to
@@ -548,13 +505,66 @@ extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
 #define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v))
 #define csr_in32(a)    (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST))
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-#define unxlate_dev_mem_ptr(p, v) do { } while (0)
+#define __raw_readb __raw_readb
+#define __raw_readw __raw_readw
+#define __raw_readl __raw_readl
+#ifdef CONFIG_64BIT
+#define __raw_readq __raw_readq
+#endif
+#define __raw_writeb __raw_writeb
+#define __raw_writew __raw_writew
+#define __raw_writel __raw_writel
+#ifdef CONFIG_64BIT
+#define __raw_writeq __raw_writeq
+#endif
+
+#define readb readb
+#define readw readw
+#define readl readl
+#ifdef CONFIG_64BIT
+#define readq readq
+#endif
+#define writeb writeb
+#define writew writew
+#define writel writel
+#ifdef CONFIG_64BIT
+#define writeq writeq
+#endif
+
+#define readsb readsb
+#define readsw readsw
+#define readsl readsl
+#ifdef CONFIG_64BIT
+#define readsq readsq
+#endif
+#define writesb writesb
+#define writesw writesw
+#define writesl writesl
+#ifdef CONFIG_64BIT
+#define writesq writesq
+#endif
+
+#define _inb _inb
+#define _inw _inw
+#define _inl _inl
+#define insb insb
+#define insw insw
+#define insl insl
+
+#define _outb _outb
+#define _outw _outw
+#define _outl _outl
+#define outsb outsb
+#define outsw outsw
+#define outsl outsl
 
 void __ioread64_copy(void *to, const void __iomem *from, size_t count);
 
+#include <asm-generic/io.h>
+
+static inline void *isa_bus_to_virt(unsigned long address)
+{
+	return phys_to_virt(address);
+}
+
 #endif /* _ASM_IO_H */
diff --git a/arch/mips/include/asm/jump_label.h b/arch/mips/include/asm/jump_label.h
index c5c6864e64bc..ff5d388502d4 100644
--- a/arch/mips/include/asm/jump_label.h
+++ b/arch/mips/include/asm/jump_label.h
@@ -15,6 +15,9 @@
 #include <linux/types.h>
 #include <asm/isa-rev.h>
 
+struct module;
+extern void jump_label_apply_nops(struct module *mod);
+
 #define JUMP_LABEL_NOP_SIZE 4
 
 #ifdef CONFIG_64BIT
@@ -36,7 +39,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\t" B_INSN " 2f\n\t"
+	asm goto("1:\t" B_INSN " 2f\n\t"
 		"2:\t.insn\n\t"
 		".pushsection __jump_table,  \"aw\"\n\t"
 		WORD_INSN " 1b, %l[l_yes], %0\n\t"
@@ -50,7 +53,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\t" J_INSN " %l[l_yes]\n\t"
+	asm goto("1:\t" J_INSN " %l[l_yes]\n\t"
 		".pushsection __jump_table,  \"aw\"\n\t"
 		WORD_INSN " 1b, %l[l_yes], %0\n\t"
 		".popsection\n\t"
diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h
index 54a85f1d4f2c..179f320cc231 100644
--- a/arch/mips/include/asm/kvm_host.h
+++ b/arch/mips/include/asm/kvm_host.h
@@ -810,8 +810,6 @@ int kvm_mips_mkclean_gpa_pt(struct kvm *kvm, gfn_t start_gfn, gfn_t end_gfn);
 pgd_t *kvm_pgd_alloc(void);
 void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu);
 
-#define KVM_ARCH_WANT_MMU_NOTIFIER
-
 /* Emulation */
 enum emulation_result update_pc(struct kvm_vcpu *vcpu, u32 cause);
 int kvm_get_badinstr(u32 *opc, struct kvm_vcpu *vcpu, u32 *out);
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index a7eec3364a64..41546777902b 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -597,6 +597,9 @@
 
 #include <asm/cpu.h>
 
+void alchemy_set_lpj(void);
+void board_setup(void);
+
 /* helpers to access the SYS_* registers */
 static inline unsigned long alchemy_rdsys(int regofs)
 {
diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
index 0a0cd4270c6f..b82e513c8523 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000_dma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
@@ -259,7 +259,7 @@ static inline void set_dma_mode(unsigned int dmanr, unsigned int mode)
 	if (!chan)
 		return;
 	/*
-	 * set_dma_mode is only allowed to change endianess, direction,
+	 * set_dma_mode is only allowed to change endianness, direction,
 	 * transfer size, device FIFO width, and coherency settings.
 	 * Make sure anything else is masked off.
 	 */
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 82bc2766e2ec..d820b481ac56 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -435,7 +435,7 @@ static inline void alchemy_gpio2_disable_int(int gpio2)
 /**
  * alchemy_gpio2_enable -  Activate GPIO2 block.
  *
- * The GPIO2 block must be enabled excplicitly to work.	 On systems
+ * The GPIO2 block must be enabled explicitly to work.	 On systems
  * where this isn't done by the bootloader, this macro can be used.
  */
 static inline void alchemy_gpio2_enable(void)
diff --git a/arch/mips/include/asm/mach-cobalt/cobalt.h b/arch/mips/include/asm/mach-cobalt/cobalt.h
index 5b9fce73f11d..97f9d5e9446d 100644
--- a/arch/mips/include/asm/mach-cobalt/cobalt.h
+++ b/arch/mips/include/asm/mach-cobalt/cobalt.h
@@ -19,4 +19,7 @@ extern int cobalt_board_id;
 #define COBALT_BRD_ID_QUBE2    0x5
 #define COBALT_BRD_ID_RAQ2     0x6
 
+void cobalt_machine_halt(void);
+void cobalt_machine_restart(char *command);
+
 #endif /* __ASM_COBALT_H */
diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
index 5855ba1bd1ec..40eaa72e54d0 100644
--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
@@ -55,7 +55,7 @@ extern __iomem void *ltq_sys1_membase;
 #define ltq_sys1_w32_mask(clear, set, reg)   \
 	ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg)
 
-/* allow the gpio and pinctrl drivers to talk to eachother */
+/* allow the gpio and pinctrl drivers to talk to each other */
 extern int pinctrl_falcon_get_range_size(int id);
 extern void pinctrl_falcon_add_gpio_range(struct pinctrl_gpio_range *range);
 
diff --git a/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h b/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h
index 545f91f2ae16..721eafc4644e 100644
--- a/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h
@@ -42,7 +42,7 @@ struct loongson_fan_policy {
 	/* period between two check. (Unit: S) */
 	u8	adjust_period;
 
-	/* fan adjust usually depend on a temprature input */
+	/* fan adjust usually depend on a temperature input */
 	get_temp_fun	depend_temp;
 
 	/* up_step/down_step used when type is STEP_SPEED_POLICY */
diff --git a/arch/mips/include/asm/mach-loongson64/loongson_regs.h b/arch/mips/include/asm/mach-loongson64/loongson_regs.h
index b5be7511f6cd..fec767507604 100644
--- a/arch/mips/include/asm/mach-loongson64/loongson_regs.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson_regs.h
@@ -227,7 +227,7 @@ static inline void csr_writeq(u64 val, u32 reg)
 #define LOONGSON_CSR_NODECNT	0x408
 #define LOONGSON_CSR_CPUTEMP	0x428
 
-/* PerCore CSR, only accessable by local cores */
+/* PerCore CSR, only accessible by local cores */
 #define LOONGSON_CSR_IPI_STATUS	0x1000
 #define LOONGSON_CSR_IPI_EN	0x1004
 #define LOONGSON_CSR_IPI_SET	0x1008
diff --git a/arch/mips/include/asm/mach-loongson64/mmzone.h b/arch/mips/include/asm/mach-loongson64/mmzone.h
index ebb1deaa77b9..a3d65d37b8b5 100644
--- a/arch/mips/include/asm/mach-loongson64/mmzone.h
+++ b/arch/mips/include/asm/mach-loongson64/mmzone.h
@@ -18,7 +18,6 @@ extern struct pglist_data *__node_data[];
 
 #define NODE_DATA(n)		(__node_data[n])
 
-extern void setup_zero_pages(void);
 extern void __init prom_init_numa_memory(void);
 
 #endif /* _ASM_MACH_MMZONE_H */
diff --git a/arch/mips/include/asm/mach-malta/spaces.h b/arch/mips/include/asm/mach-malta/spaces.h
index d7e54971ec66..1ce4ba97852f 100644
--- a/arch/mips/include/asm/mach-malta/spaces.h
+++ b/arch/mips/include/asm/mach-malta/spaces.h
@@ -23,13 +23,13 @@
  * The kernel is still located in 0x80000000(kseg0). However,
  * the physical mask has been shifted to 0x80000000 which exploits the alias
  * on the Malta board. As a result of which, we override the __pa_symbol
- * to peform direct mapping from virtual to physical addresses. In other
+ * to perform direct mapping from virtual to physical addresses. In other
  * words, the 0x80000000 virtual address maps to 0x80000000 physical address
  * which in turn aliases to 0x0. We do this in order to be able to use a flat
  * 2GB of memory (0x80000000 - 0xffffffff) so we can avoid the I/O hole in
  * 0x10000000 - 0x1fffffff.
  * The last 64KB of physical memory are reserved for correct HIGHMEM
- * macros arithmetics.
+ * macros arithmetic.
  *
  */
 
diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h
index 5368891d424b..31a31fe78d77 100644
--- a/arch/mips/include/asm/mips-boards/bonito64.h
+++ b/arch/mips/include/asm/mips-boards/bonito64.h
@@ -16,7 +16,7 @@
  */
 
 /* Revision 1.48 autogenerated on 08/17/99 15:20:01 */
-/* This bonito64 version editted from bonito.h Revision 1.48 on 11/09/00 */
+/* This bonito64 version edited from bonito.h Revision 1.48 on 11/09/00 */
 
 #ifndef _ASM_MIPS_BOARDS_BONITO64_H
 #define _ASM_MIPS_BOARDS_BONITO64_H
diff --git a/arch/mips/include/asm/mips-cpc.h b/arch/mips/include/asm/mips-cpc.h
index b54453f1648c..5f3a7a9f42bf 100644
--- a/arch/mips/include/asm/mips-cpc.h
+++ b/arch/mips/include/asm/mips-cpc.h
@@ -22,7 +22,7 @@ extern void __iomem *mips_cpc_base;
  *                              the CPC
  *
  * Returns the default physical base address of the Cluster Power Controller
- * memory mapped registers. This is platform dependant & must therefore be
+ * memory mapped registers. This is platform dependent & must therefore be
  * implemented per-platform.
  */
 extern phys_addr_t mips_cpc_default_phys_base(void);
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 2d53704d9f24..ec58cb76d076 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -98,7 +98,7 @@
 
 /*
  * R4640/R4650 cp0 register names.  These registers are listed
- * here only for completeness; without MMU these CPUs are not useable
+ * here only for completeness; without MMU these CPUs are not usable
  * by Linux.  A future ELKS port might take make Linux run on them
  * though ...
  */
@@ -461,7 +461,7 @@
 #define EXCCODE_THREAD		25	/* Thread exceptions (MT) */
 #define EXCCODE_DSPDIS		26	/* DSP disabled exception */
 #define EXCCODE_GE		27	/* Virtualized guest exception (VZ) */
-#define EXCCODE_CACHEERR	30	/* Parity/ECC occured on a core */
+#define EXCCODE_CACHEERR	30	/* Parity/ECC occurred on a core */
 
 /* Implementation specific trap codes used by MIPS cores */
 #define MIPS_EXCCODE_TLBPAR	16	/* TLB parity error exception */
diff --git a/arch/mips/include/asm/mmiowb.h b/arch/mips/include/asm/mmiowb.h
index a40824e3ef8e..cf27752fd220 100644
--- a/arch/mips/include/asm/mmiowb.h
+++ b/arch/mips/include/asm/mmiowb.h
@@ -2,9 +2,9 @@
 #ifndef _ASM_MMIOWB_H
 #define _ASM_MMIOWB_H
 
-#include <asm/io.h>
+#include <asm/barrier.h>
 
-#define mmiowb()	iobarrier_w()
+#define mmiowb()	wmb()
 
 #include <asm-generic/mmiowb.h>
 
diff --git a/arch/mips/include/asm/mmzone.h b/arch/mips/include/asm/mmzone.h
index 602a21aee9d4..14226ea42036 100644
--- a/arch/mips/include/asm/mmzone.h
+++ b/arch/mips/include/asm/mmzone.h
@@ -20,4 +20,6 @@
 #define nid_to_addrbase(nid) 0
 #endif
 
+extern void setup_zero_pages(void);
+
 #endif /* _ASM_MMZONE_H_ */
diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
index c1c0b3230e0a..028bf1d6daee 100644
--- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
@@ -114,7 +114,7 @@ struct cvmx_bootinfo {
 
 	/*
 	 * flags indicating various configuration options.  These
-	 * flags supercede the 'flags' variable and should be used
+	 * flags supersede the 'flags' variable and should be used
 	 * instead if available.
 	 */
 	uint32_t config_flags;
diff --git a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
index a07a36f7d814..67e1b2162b19 100644
--- a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
+++ b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
@@ -145,7 +145,7 @@ typedef struct {
 /**
  * This structure contains the global state of all command queues.
  * It is stored in a bootmem named block and shared by all
- * applications running on Octeon. Tickets are stored in a differnet
+ * applications running on Octeon. Tickets are stored in a different
  * cache line that queue information to reduce the contention on the
  * ll/sc used to get a ticket. If this is not the case, the update
  * of queue state causes the ll/sc to fail quite often.
@@ -172,7 +172,7 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id,
 						  int pool_size);
 
 /**
- * Shutdown a queue a free it's command buffers to the FPA. The
+ * Shutdown a queue and free its command buffers to the FPA. The
  * hardware connected to the queue must be stopped before this
  * function is called.
  *
@@ -194,7 +194,7 @@ int cvmx_cmd_queue_length(cvmx_cmd_queue_id_t queue_id);
 
 /**
  * Return the command buffer to be written to. The purpose of this
- * function is to allow CVMX routine access t othe low level buffer
+ * function is to allow CVMX routine access to the low level buffer
  * for initial hardware setup. User applications should not call this
  * function directly.
  *
diff --git a/arch/mips/include/asm/octeon/cvmx-pko.h b/arch/mips/include/asm/octeon/cvmx-pko.h
index 5fec8476e421..f18a7f24daf8 100644
--- a/arch/mips/include/asm/octeon/cvmx-pko.h
+++ b/arch/mips/include/asm/octeon/cvmx-pko.h
@@ -91,7 +91,7 @@ typedef enum {
 } cvmx_pko_status_t;
 
 /**
- * This enumeration represents the differnet locking modes supported by PKO.
+ * This enumeration represents the different locking modes supported by PKO.
  */
 typedef enum {
 	/*
diff --git a/arch/mips/include/asm/octeon/cvmx-pow.h b/arch/mips/include/asm/octeon/cvmx-pow.h
index a3b23811e0c3..21b4378244fa 100644
--- a/arch/mips/include/asm/octeon/cvmx-pow.h
+++ b/arch/mips/include/asm/octeon/cvmx-pow.h
@@ -1342,7 +1342,7 @@ static inline void cvmx_pow_tag_sw_wait(void)
  * This function does NOT wait for previous tag switches to complete,
  * so the caller must ensure that there is not a pending tag switch.
  *
- * @wait:   When set, call stalls until work becomes avaiable, or times out.
+ * @wait:   When set, call stalls until work becomes available, or times out.
  *		 If not set, returns immediately.
  *
  * Returns: the WQE pointer from POW. Returns NULL if no work
@@ -1376,7 +1376,7 @@ static inline struct cvmx_wqe *cvmx_pow_work_request_sync_nocheck(cvmx_pow_wait_
  * This function waits for any previous tag switch to complete before
  * requesting the new work.
  *
- * @wait:   When set, call stalls until work becomes avaiable, or times out.
+ * @wait:   When set, call stalls until work becomes available, or times out.
  *		 If not set, returns immediately.
  *
  * Returns: the WQE pointer from POW. Returns NULL if no work
diff --git a/arch/mips/include/asm/octeon/octeon-model.h b/arch/mips/include/asm/octeon/octeon-model.h
index 6c68517c2770..e53b61a8e32f 100644
--- a/arch/mips/include/asm/octeon/octeon-model.h
+++ b/arch/mips/include/asm/octeon/octeon-model.h
@@ -54,7 +54,7 @@
 #define OM_CHECK_SUBMODEL	  0x02000000
 /* Match all models previous than the one specified */
 #define OM_MATCH_PREVIOUS_MODELS  0x04000000
-/* Ignores the minor revison on newer parts */
+/* Ignores the minor revision on newer parts */
 #define OM_IGNORE_MINOR_REVISION  0x08000000
 #define OM_FLAG_MASK		  0xff000000
 
@@ -226,7 +226,7 @@
 #define OCTEON_CN52XX_PASS2	OCTEON_CN52XX_PASS2_X
 
 /*
- * CN3XXX models with old revision enconding
+ * CN3XXX models with old revision encoding
  */
 #define OCTEON_CN38XX_PASS1	0x000d0000
 #define OCTEON_CN38XX_PASS2	0x000d0001
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index 5978a8dfb917..ef9585d96f6b 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -173,7 +173,7 @@ static inline unsigned long ___pa(unsigned long x)
 	if (IS_ENABLED(CONFIG_64BIT)) {
 		/*
 		 * For MIPS64 the virtual address may either be in one of
-		 * the compatibility segements ckseg0 or ckseg1, or it may
+		 * the compatibility segments ckseg0 or ckseg1, or it may
 		 * be in xkphys.
 		 */
 		return x < CKSEG0 ? XPHYSADDR(x) : CPHYSADDR(x);
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 3fd6e22c108b..d993df6302dc 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -23,7 +23,7 @@
 #ifdef CONFIG_PCI_DRIVERS_LEGACY
 
 /*
- * Each pci channel is a top-level PCI bus seem by CPU.	 A machine  with
+ * Each PCI channel is a top-level PCI bus seem by CPU.	 A machine with
  * multiple PCI channels may have multiple PCI host controllers or a
  * single controller supporting multiple channels.
  */
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
index 421e78c30253..088623ba7b8b 100644
--- a/arch/mips/include/asm/pgtable-bits.h
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -201,7 +201,7 @@ enum pgtable_bits {
  * The final layouts of the PTE bits are:
  *
  *   64-bit, R1 or earlier:     CCC D V G [S H] M A W R P
- *   32-bit, R1 or earler:      CCC D V G M A W R P
+ *   32-bit, R1 or earlier:     CCC D V G M A W R P
  *   64-bit, R2 or later:       CCC D V G RI/R XI [S H] M A W P
  *   32-bit, R2 or later:       CCC D V G RI/R XI M A W P
  */
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 430b208c0130..e27a4c83c548 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -655,6 +655,7 @@ static inline pmd_t pmd_mkwrite_novma(pmd_t pmd)
 	return pmd;
 }
 
+#define pmd_dirty pmd_dirty
 static inline int pmd_dirty(pmd_t pmd)
 {
 	return !!(pmd_val(pmd) & _PAGE_MODIFIED);
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index ae2cd37a38f0..ca7662cc65a7 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -402,4 +402,6 @@ extern int mips_set_process_fp_mode(struct task_struct *task,
 #define GET_FP_MODE(task)		mips_get_process_fp_mode(task)
 #define SET_FP_MODE(task,value)		mips_set_process_fp_mode(task, value)
 
+void show_registers(struct pt_regs *regs);
+
 #endif /* _ASM_PROCESSOR_H */
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index daf3cf244ea9..d14d0e37ad02 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -60,6 +60,7 @@ static inline void instruction_pointer_set(struct pt_regs *regs,
                                            unsigned long val)
 {
 	regs->cp0_epc = val;
+	regs->cp0_cause &= ~CAUSEF_BD;
 }
 
 /* Query offset/name of register from its name/offset */
@@ -154,6 +155,8 @@ static inline long regs_return_value(struct pt_regs *regs)
 }
 
 #define instruction_pointer(regs) ((regs)->cp0_epc)
+extern unsigned long exception_ip(struct pt_regs *regs);
+#define exception_ip(regs) exception_ip(regs)
 #define profile_pc(regs) instruction_pointer(regs)
 
 extern asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall);
diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
index 431a1c9d53fc..da1cd1bbdbc5 100644
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -24,6 +24,10 @@
 #include <asm/mmzone.h>
 #include <asm/unroll.h>
 
+extern void r5k_sc_init(void);
+extern void rm7k_sc_init(void);
+extern int mips_sc_init(void);
+
 extern void (*r4k_blast_dcache)(void);
 extern void (*r4k_blast_icache)(void);
 
diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h
index 8c56b862fd9c..4dce41138bad 100644
--- a/arch/mips/include/asm/setup.h
+++ b/arch/mips/include/asm/setup.h
@@ -27,5 +27,6 @@ extern unsigned long ebase;
 extern unsigned int hwrena;
 extern void per_cpu_trap_init(bool);
 extern void cpu_cache_init(void);
+extern void tlb_init(void);
 
 #endif /* __SETUP_H */
diff --git a/arch/mips/include/asm/sgi/mc.h b/arch/mips/include/asm/sgi/mc.h
index 3a070cec97e7..5e96f9d32624 100644
--- a/arch/mips/include/asm/sgi/mc.h
+++ b/arch/mips/include/asm/sgi/mc.h
@@ -96,7 +96,7 @@ struct sgimc_regs {
 	volatile u32 lbursttp;	/* Time period for long bursts */
 
 	/* MC chip can drive up to 4 bank 4 SIMMs each. All SIMMs in bank must
-	 * be the same size. The size encoding for supported SIMMs is bellow */
+	 * be the same size. The size encoding for supported SIMMs is below */
 	u32 _unused11[9];
 	volatile u32 mconfig0;	/* Memory config register zero */
 	u32 _unused12;
diff --git a/arch/mips/include/asm/signal.h b/arch/mips/include/asm/signal.h
index 23d6b8015c79..8de81ccef7ad 100644
--- a/arch/mips/include/asm/signal.h
+++ b/arch/mips/include/asm/signal.h
@@ -31,5 +31,6 @@ extern struct mips_abi mips_abi_32;
 
 extern int protected_save_fp_context(void __user *sc);
 extern int protected_restore_fp_context(void __user *sc);
+void do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags);
 
 #endif /* _ASM_SIGNAL_H */
diff --git a/arch/mips/include/asm/smp-ops.h b/arch/mips/include/asm/smp-ops.h
index 0c59e168f800..1617b207723f 100644
--- a/arch/mips/include/asm/smp-ops.h
+++ b/arch/mips/include/asm/smp-ops.h
@@ -13,8 +13,6 @@
 
 #include <linux/errno.h>
 
-#include <asm/mips-cps.h>
-
 #ifdef CONFIG_SMP
 
 #include <linux/cpumask.h>
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index 901bc61fa7ae..bc2c240f414b 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -11,13 +11,11 @@
 #ifndef __ASM_SMP_H
 #define __ASM_SMP_H
 
-#include <linux/bitops.h>
+#include <linux/compiler.h>
 #include <linux/linkage.h>
-#include <linux/smp.h>
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 
-#include <linux/atomic.h>
 #include <asm/smp-ops.h>
 
 extern int smp_num_siblings;
@@ -63,6 +61,8 @@ extern asmlinkage void smp_bootstrap(void);
 
 extern void calculate_cpu_foreign_map(void);
 
+asmlinkage void start_secondary(void);
+
 /*
  * this function sends a 'reschedule' IPI to another CPU.
  * it goes straight through and wastes no time serializing
diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h
index 117f85e4bef5..3d1670b3e052 100644
--- a/arch/mips/include/asm/sn/klconfig.h
+++ b/arch/mips/include/asm/sn/klconfig.h
@@ -851,7 +851,7 @@ typedef union kldev_s {	     /* for device structure allocation */
 /*
  * TBD - Allocation issues.
  *
- * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component,
+ * Do we need to Mark off separate heaps for lboard_t, rboard_t, component,
  * errinfo and allocate from them, or have a single heap and allocate all
  * structures from it. Debug is easier in the former method since we can
  * dump all similar structs in one command, but there will be lots of holes,
diff --git a/arch/mips/include/asm/spram.h b/arch/mips/include/asm/spram.h
index 373f2a5d495d..9f6a2cb1943a 100644
--- a/arch/mips/include/asm/spram.h
+++ b/arch/mips/include/asm/spram.h
@@ -3,7 +3,7 @@
 #define _MIPS_SPRAM_H
 
 #if defined(CONFIG_MIPS_SPRAM)
-extern __init void spram_config(void);
+extern void spram_config(void);
 #else
 static inline void spram_config(void) { }
 #endif /* CONFIG_MIPS_SPRAM */
diff --git a/arch/mips/include/asm/sync.h b/arch/mips/include/asm/sync.h
index aabd097933fe..44c04a82d0b7 100644
--- a/arch/mips/include/asm/sync.h
+++ b/arch/mips/include/asm/sync.h
@@ -19,7 +19,7 @@
  *
  * Ordering barriers can be more efficient than completion barriers, since:
  *
- *   a) Ordering barriers only require memory access instructions which preceed
+ *   a) Ordering barriers only require memory access instructions which precede
  *      them in program order (older instructions) to reach a point in the
  *      load/store datapath beyond which reordering is not possible before
  *      allowing memory access instructions which follow them (younger
diff --git a/arch/mips/include/asm/syscalls.h b/arch/mips/include/asm/syscalls.h
new file mode 100644
index 000000000000..59f9c0c9fa0a
--- /dev/null
+++ b/arch/mips/include/asm/syscalls.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASM_MIPS_SYSCALLS_H
+#define _ASM_MIPS_SYSCALLS_H
+
+#include <linux/linkage.h>
+#include <linux/compat.h>
+
+asmlinkage void sys_sigreturn(void);
+asmlinkage void sys_rt_sigreturn(void);
+asmlinkage int sysm_pipe(void);
+asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
+                                     unsigned long __user *user_mask_ptr);
+asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len,
+                                     unsigned long __user *user_mask_ptr);
+asmlinkage long sys32_fallocate(int fd, int mode, unsigned offset_a2,
+				unsigned offset_a3, unsigned len_a4,
+				unsigned len_a5);
+asmlinkage long sys32_fadvise64_64(int fd, int __pad,
+				   unsigned long a2, unsigned long a3,
+				   unsigned long a4, unsigned long a5,
+				   int flags);
+asmlinkage ssize_t sys32_readahead(int fd, u32 pad0, u64 a2, u64 a3,
+				   size_t count);
+asmlinkage long sys32_sync_file_range(int fd, int __pad,
+				      unsigned long a2, unsigned long a3,
+				      unsigned long a4, unsigned long a5,
+				      int flags);
+asmlinkage void sys32_rt_sigreturn(void);
+asmlinkage void sys32_sigreturn(void);
+asmlinkage int sys32_sigsuspend(compat_sigset_t __user *uset);
+asmlinkage void sysn32_rt_sigreturn(void);
+
+#endif
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index ecae7470faa4..b9d76e8ac5a2 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -27,7 +27,7 @@ struct thread_info {
 	unsigned long		flags;		/* low level flags */
 	unsigned long		tp_value;	/* thread pointer */
 	__u32			cpu;		/* current CPU */
-	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
+	int			preempt_count;	/* 0 => preemptible, <0 => BUG */
 	struct pt_regs		*regs;
 	long			syscall;	/* syscall number */
 };
diff --git a/arch/mips/include/asm/timex.h b/arch/mips/include/asm/timex.h
index 2e107886f97a..7ef06dcdc46e 100644
--- a/arch/mips/include/asm/timex.h
+++ b/arch/mips/include/asm/timex.h
@@ -46,7 +46,7 @@ typedef unsigned int cycles_t;
  *
  * There is a suggested workaround and also the erratum can't strike if
  * the compare interrupt isn't being used as the clock source device.
- * However for now the implementaton of this function doesn't get these
+ * However for now the implementation of this function doesn't get these
  * fine details right.
  */
 static inline int can_use_mips_counter(unsigned int prid)
diff --git a/arch/mips/include/asm/tlbex.h b/arch/mips/include/asm/tlbex.h
index 6d97e23f30ab..24a2d06cc1c3 100644
--- a/arch/mips/include/asm/tlbex.h
+++ b/arch/mips/include/asm/tlbex.h
@@ -23,6 +23,7 @@ void build_update_entries(u32 **p, unsigned int tmp, unsigned int ptep);
 void build_tlb_write_entry(u32 **p, struct uasm_label **l,
 			   struct uasm_reloc **r,
 			   enum tlb_write_entry wmode);
+void build_tlb_refill_handler(void);
 
 extern void handle_tlbl(void);
 extern char handle_tlbl_end[];
diff --git a/arch/mips/include/asm/traps.h b/arch/mips/include/asm/traps.h
index 15cde638b407..2a8a258730c9 100644
--- a/arch/mips/include/asm/traps.h
+++ b/arch/mips/include/asm/traps.h
@@ -39,4 +39,30 @@ extern char except_vec_nmi[];
 	register_nmi_notifier(&fn##_nb);				\
 })
 
+asmlinkage void do_ade(struct pt_regs *regs);
+asmlinkage void do_be(struct pt_regs *regs);
+asmlinkage void do_ov(struct pt_regs *regs);
+asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31);
+asmlinkage void do_bp(struct pt_regs *regs);
+asmlinkage void do_tr(struct pt_regs *regs);
+asmlinkage void do_ri(struct pt_regs *regs);
+asmlinkage void do_cpu(struct pt_regs *regs);
+asmlinkage void do_msa_fpe(struct pt_regs *regs, unsigned int msacsr);
+asmlinkage void do_msa(struct pt_regs *regs);
+asmlinkage void do_mdmx(struct pt_regs *regs);
+asmlinkage void do_watch(struct pt_regs *regs);
+asmlinkage void do_mcheck(struct pt_regs *regs);
+asmlinkage void do_mt(struct pt_regs *regs);
+asmlinkage void do_dsp(struct pt_regs *regs);
+asmlinkage void do_reserved(struct pt_regs *regs);
+asmlinkage void do_ftlb(void);
+asmlinkage void do_gsexc(struct pt_regs *regs, u32 diag1);
+asmlinkage void do_daddi_ov(struct pt_regs *regs);
+asmlinkage void do_page_fault(struct pt_regs *regs,
+	unsigned long write, unsigned long address);
+
+asmlinkage void cache_parity_error(void);
+asmlinkage void ejtag_exception_handler(struct pt_regs *regs);
+asmlinkage void __noreturn nmi_exception_handler(struct pt_regs *regs);
+
 #endif /* _ASM_TRAPS_H */
diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h
index 296bcf31abb5..b43bfd445252 100644
--- a/arch/mips/include/asm/uasm.h
+++ b/arch/mips/include/asm/uasm.h
@@ -193,9 +193,7 @@ struct uasm_label {
 
 void uasm_build_label(struct uasm_label **lab, u32 *addr,
 			int lid);
-#ifdef CONFIG_64BIT
 int uasm_in_compat_space_p(long addr);
-#endif
 int uasm_rel_hi(long val);
 int uasm_rel_lo(long val);
 void UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr);
diff --git a/arch/mips/include/asm/vdso/vdso.h b/arch/mips/include/asm/vdso/vdso.h
index a327ca21270e..6cd88191fefa 100644
--- a/arch/mips/include/asm/vdso/vdso.h
+++ b/arch/mips/include/asm/vdso/vdso.h
@@ -32,7 +32,7 @@ static inline unsigned long get_vdso_base(void)
 #else
 	/*
 	 * Get the base load address of the VDSO. We have to avoid generating
-	 * relocations and references to the GOT because ld.so does not peform
+	 * relocations and references to the GOT because ld.so does not perform
 	 * relocations on the VDSO. We use the current offset from the VDSO base
 	 * and perform a PC-relative branch which gives the absolute address in
 	 * ra, and take the difference. The assembler chokes on
diff --git a/arch/mips/include/uapi/asm/mman.h b/arch/mips/include/uapi/asm/mman.h
index c6e1fc77c996..9c48d9a21aa0 100644
--- a/arch/mips/include/uapi/asm/mman.h
+++ b/arch/mips/include/uapi/asm/mman.h
@@ -88,7 +88,7 @@
 #define MADV_HUGEPAGE	14		/* Worth backing with hugepages */
 #define MADV_NOHUGEPAGE 15		/* Not worth backing with hugepages */
 
-#define MADV_DONTDUMP	16		/* Explicity exclude from the core dump,
+#define MADV_DONTDUMP	16		/* Explicitly exclude from core dump,
 					   overrides the coredump filter bits */
 #define MADV_DODUMP	17		/* Clear the MADV_NODUMP flag */
 
diff --git a/arch/mips/include/uapi/asm/msgbuf.h b/arch/mips/include/uapi/asm/msgbuf.h
index 128af72f2dfe..d546642fc67e 100644
--- a/arch/mips/include/uapi/asm/msgbuf.h
+++ b/arch/mips/include/uapi/asm/msgbuf.h
@@ -62,7 +62,7 @@ struct msqid64_ds {
 	unsigned long  __unused5;
 };
 #else
-#warning no endianess set
+#warning no endianness set
 #endif
 
 #endif /* _ASM_MSGBUF_H */
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index b406d8bfb15a..bda7f193baab 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -179,7 +179,6 @@ void __init check_bugs32(void)
 static inline int cpu_has_confreg(void)
 {
 #ifdef CONFIG_CPU_R3000
-	extern unsigned long r3k_cache_size(unsigned long);
 	unsigned long size1, size2;
 	unsigned long cfg = read_c0_conf();
 
@@ -1139,7 +1138,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		 * This processor doesn't have an MMU, so it's not
 		 * "real easy" to run Linux on it. It is left purely
 		 * for documentation.  Commented out because it shares
-		 * it's c0_prid id number with the TX3900.
+		 * its c0_prid id number with the TX3900.
 		 */
 		c->cputype = CPU_R4650;
 		__cpu_name[cpu] = "R4650";
diff --git a/arch/mips/kernel/cpu-r3k-probe.c b/arch/mips/kernel/cpu-r3k-probe.c
index be93469c0e0e..0c826f729f75 100644
--- a/arch/mips/kernel/cpu-r3k-probe.c
+++ b/arch/mips/kernel/cpu-r3k-probe.c
@@ -42,7 +42,6 @@ void __init check_bugs32(void)
 static inline int cpu_has_confreg(void)
 {
 #ifdef CONFIG_CPU_R3000
-	extern unsigned long r3k_cache_size(unsigned long);
 	unsigned long size1, size2;
 	unsigned long cfg = read_c0_conf();
 
diff --git a/arch/mips/kernel/elf.c b/arch/mips/kernel/elf.c
index 5582a4ca1e9e..7aa2c2360ff6 100644
--- a/arch/mips/kernel/elf.c
+++ b/arch/mips/kernel/elf.c
@@ -11,6 +11,7 @@
 
 #include <asm/cpu-features.h>
 #include <asm/cpu-info.h>
+#include <asm/fpu.h>
 
 #ifdef CONFIG_MIPS_FP_SUPPORT
 
@@ -309,6 +310,11 @@ void mips_set_personality_nan(struct arch_elf_state *state)
 	struct cpuinfo_mips *c = &boot_cpu_data;
 	struct task_struct *t = current;
 
+	/* Do this early so t->thread.fpu.fcr31 won't be clobbered in case
+	 * we are preempted before the lose_fpu(0) in start_thread.
+	 */
+	lose_fpu(0);
+
 	t->thread.fpu.fcr31 = c->fpu_csr31;
 	switch (state->nan_2008) {
 	case 0:
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index b6de8e88c1bd..a572ce36a24f 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -272,18 +272,17 @@ NESTED(except_vec_vi, 0, sp)
 	.set	push
 	.set	noreorder
 	PTR_LA	v1, except_vec_vi_handler
-FEXPORT(except_vec_vi_lui)
-	lui	v0, 0		/* Patched */
 	jr	v1
 FEXPORT(except_vec_vi_ori)
-	 ori	v0, 0		/* Patched */
+	 ori	v0, zero, 0		/* Offset in vi_handlers[] */
 	.set	pop
 	END(except_vec_vi)
 EXPORT(except_vec_vi_end)
 
 /*
  * Common Vectored Interrupt code
- * Complete the register saves and invoke the handler which is passed in $v0
+ * Complete the register saves and invoke the handler, $v0 holds
+ * offset into vi_handlers[]
  */
 NESTED(except_vec_vi_handler, 0, sp)
 	SAVE_TEMP
@@ -331,6 +330,7 @@ NESTED(except_vec_vi_handler, 0, sp)
 	/* Save task's sp on IRQ stack so that unwinding can follow it */
 	LONG_S	s1, 0(sp)
 2:
+	PTR_L	v0, vi_handlers(v0)
 	jalr	v0
 
 	/* Restore sp */
diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
index 316b27d0d2fb..dc39f5b3fb83 100644
--- a/arch/mips/kernel/kprobes.c
+++ b/arch/mips/kernel/kprobes.c
@@ -55,7 +55,7 @@ NOKPROBE_SYMBOL(insn_has_delayslot);
  * one; putting breakpoint on top of atomic ll/sc pair is bad idea;
  * so we need to prevent it and refuse kprobes insertion for such
  * instructions; cannot do much about breakpoint in the middle of
- * ll/sc pair; it is upto user to avoid those places
+ * ll/sc pair; it is up to user to avoid those places
  */
 static int insn_has_ll_or_sc(union mips_instruction insn)
 {
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 6b61be486303..a0c0a7a654e9 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -42,6 +42,7 @@
 #include <linux/uaccess.h>
 #include <asm/mmu_context.h>
 #include <asm/mman.h>
+#include <asm/syscalls.h>
 
 #ifdef __MIPSEB__
 #define merge_64(r1, r2) ((((r1) & 0xffffffffUL) << 32) + ((r2) & 0xffffffffUL))
diff --git a/arch/mips/kernel/machine_kexec.c b/arch/mips/kernel/machine_kexec.c
index 432bfd3e7f22..4e3579bbd620 100644
--- a/arch/mips/kernel/machine_kexec.c
+++ b/arch/mips/kernel/machine_kexec.c
@@ -8,6 +8,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/libfdt.h>
+#include <linux/reboot.h>
 
 #include <asm/cacheflush.h>
 #include <asm/page.h>
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index 3f00788b0871..84b3affb9de8 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -201,7 +201,7 @@ phys_addr_t __mips_cm_phys_base(void)
 phys_addr_t mips_cm_phys_base(void)
 	__attribute__((weak, alias("__mips_cm_phys_base")));
 
-phys_addr_t __mips_cm_l2sync_phys_base(void)
+static phys_addr_t __mips_cm_l2sync_phys_base(void)
 {
 	u32 base_reg;
 
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index 67e130d3f038..10172fc4f627 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -15,6 +15,7 @@
 #include <linux/security.h>
 #include <linux/types.h>
 #include <linux/uaccess.h>
+#include <asm/syscalls.h>
 
 /*
  * CPU mask used to set process affinity for MT VPEs/TCs with FPUs
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index f88b7919f11f..c07d64438b5b 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -19,6 +19,7 @@
 #include <asm/mipsmtregs.h>
 #include <asm/r4kcache.h>
 #include <asm/cacheflush.h>
+#include <asm/mips_mt.h>
 
 int vpelimit;
 
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 0c936cbf20c5..7b2fbaa9cac5 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -20,8 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/jump_label.h>
-
-extern void jump_label_apply_nops(struct module *mod);
+#include <asm/jump_label.h>
 
 struct mips_hi16 {
 	struct mips_hi16 *next;
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index f88ce78e13e3..6062e6fa589a 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -28,6 +28,8 @@ __init void mips_set_machine_name(const char *name)
 
 	strscpy(mips_machine_name, name, sizeof(mips_machine_name));
 	pr_info("MIPS: machine is %s\n", mips_get_machine_name());
+
+	dump_stack_set_arch_desc(name);
 }
 
 char *mips_get_machine_name(void)
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index d9df543f7e2c..59288c13b581 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -31,6 +31,7 @@
 #include <linux/seccomp.h>
 #include <linux/ftrace.h>
 
+#include <asm/branch.h>
 #include <asm/byteorder.h>
 #include <asm/cpu.h>
 #include <asm/cpu-info.h>
@@ -48,6 +49,12 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/syscalls.h>
 
+unsigned long exception_ip(struct pt_regs *regs)
+{
+	return exception_epc(regs);
+}
+EXPORT_SYMBOL(exception_ip);
+
 /*
  * Called by kernel/ptrace.c when detaching..
  *
diff --git a/arch/mips/kernel/r4k-bugs64.c b/arch/mips/kernel/r4k-bugs64.c
index 6ffefb2c6971..1e300330078d 100644
--- a/arch/mips/kernel/r4k-bugs64.c
+++ b/arch/mips/kernel/r4k-bugs64.c
@@ -14,6 +14,7 @@
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
 #include <asm/setup.h>
+#include <asm/traps.h>
 
 static char bug64hit[] __initdata =
 	"reliable operation impossible!\n%s";
diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c
index 58fc8d089402..7eeeaf1ff95d 100644
--- a/arch/mips/kernel/relocate.c
+++ b/arch/mips/kernel/relocate.c
@@ -380,7 +380,7 @@ void *__init relocate_kernel(void)
 		}
 #endif /* CONFIG_USE_OF */
 
-		/* Copy the kernel to it's new location */
+		/* Copy the kernel to its new location */
 		memcpy(loc_new, &_text, kernel_length);
 
 		/* Perform relocations on the new kernel */
diff --git a/arch/mips/kernel/relocate_kernel.S b/arch/mips/kernel/relocate_kernel.S
index 8f0a7263a9d6..de894a0211d7 100644
--- a/arch/mips/kernel/relocate_kernel.S
+++ b/arch/mips/kernel/relocate_kernel.S
@@ -70,7 +70,7 @@ copy_word:
 done:
 #ifdef CONFIG_SMP
 	/* kexec_flag reset is signal to other CPUs what kernel
-	   was moved to it's location. Note - we need relocated address
+	   was moved to its location. Note - we need relocated address
 	   of kexec_flag.  */
 
 	bal		1f
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 2d2ca024bd47..9c30de151597 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -42,6 +42,7 @@
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/smp-ops.h>
+#include <asm/mips-cps.h>
 #include <asm/prom.h>
 #include <asm/fw/fw.h>
 
@@ -146,7 +147,7 @@ static unsigned long __init init_initrd(void)
 	/*
 	 * Board specific code or command line parser should have
 	 * already set up initrd_start and initrd_end. In these cases
-	 * perfom sanity checks and use them if all looks good.
+	 * perform sanity checks and use them if all looks good.
 	 */
 	if (!initrd_start || initrd_end <= initrd_start)
 		goto disable;
@@ -321,11 +322,11 @@ static void __init bootmem_init(void)
 		panic("Incorrect memory mapping !!!");
 
 	if (max_pfn > PFN_DOWN(HIGHMEM_START)) {
+		max_low_pfn = PFN_DOWN(HIGHMEM_START);
 #ifdef CONFIG_HIGHMEM
-		highstart_pfn = PFN_DOWN(HIGHMEM_START);
+		highstart_pfn = max_low_pfn;
 		highend_pfn = max_pfn;
 #else
-		max_low_pfn = PFN_DOWN(HIGHMEM_START);
 		max_pfn = max_low_pfn;
 #endif
 	}
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index f50d48435c68..136eb20ac024 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -40,4 +40,7 @@ _restore_fp_context(void __user *fpregs, void __user *csr);
 extern asmlinkage int _save_msa_all_upper(void __user *buf);
 extern asmlinkage int _restore_msa_all_upper(void __user *buf);
 
+extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *);
+extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *);
+
 #endif	/* __SIGNAL_COMMON_H */
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 479999b7f2de..4a10f18a8806 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -38,6 +38,7 @@
 #include <asm/dsp.h>
 #include <asm/inst.h>
 #include <asm/msa.h>
+#include <asm/syscalls.h>
 
 #include "signal-common.h"
 
@@ -569,7 +570,7 @@ void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
 		return (void __user __force *)(-1UL);
 
 	/*
-	 * FPU emulator may have it's own trampoline active just
+	 * FPU emulator may have its own trampoline active just
 	 * above the user stack, 16-bytes before the next lowest
 	 * 16 byte boundary.  Try to avoid trashing it.
 	 */
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 59b8965433c2..73081d4ee8c1 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -18,6 +18,7 @@
 #include <asm/compat-signal.h>
 #include <linux/uaccess.h>
 #include <asm/unistd.h>
+#include <asm/syscalls.h>
 
 #include "signal-common.h"
 
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index cfc77b69420a..139d2596b0d4 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -24,6 +24,7 @@
 #include <asm/ucontext.h>
 #include <asm/fpu.h>
 #include <asm/cpu-features.h>
+#include <asm/syscalls.h>
 
 #include "signal-common.h"
 
@@ -32,9 +33,6 @@
  */
 #define __NR_N32_restart_syscall	6214
 
-extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *);
-extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *);
-
 struct ucontextn32 {
 	u32		    uc_flags;
 	s32		    uc_link;
diff --git a/arch/mips/kernel/signal_o32.c b/arch/mips/kernel/signal_o32.c
index 299a7a28ca33..4f0458459650 100644
--- a/arch/mips/kernel/signal_o32.c
+++ b/arch/mips/kernel/signal_o32.c
@@ -19,6 +19,7 @@
 #include <asm/dsp.h>
 #include <asm/sim.h>
 #include <asm/unistd.h>
+#include <asm/syscalls.h>
 
 #include "signal-common.h"
 
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 82e2e051b416..0b53d35a116e 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -10,6 +10,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/profile.h>
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 #include <linux/threads.h>
@@ -468,11 +469,13 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	return 0;
 }
 
+#ifdef CONFIG_PROFILING
 /* Not really SMP stuff ... */
 int setup_profiling_timer(unsigned int multiplier)
 {
 	return 0;
 }
+#endif
 
 static void flush_tlb_all_ipi(void *info)
 {
diff --git a/arch/mips/kernel/spram.c b/arch/mips/kernel/spram.c
index d5d96214cce5..71c7e5e27567 100644
--- a/arch/mips/kernel/spram.c
+++ b/arch/mips/kernel/spram.c
@@ -12,6 +12,7 @@
 #include <asm/mipsregs.h>
 #include <asm/r4kcache.h>
 #include <asm/hazards.h>
+#include <asm/spram.h>
 
 /*
  * These definitions are correct for the 24K/34K/74K SPRAM sample
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index ae93a607ddf7..1bfc34a2e5b3 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -39,6 +39,7 @@
 #include <asm/shmparam.h>
 #include <asm/sync.h>
 #include <asm/sysmips.h>
+#include <asm/syscalls.h>
 #include <asm/switch_to.h>
 
 /*
diff --git a/arch/mips/kernel/syscalls/syscall_n32.tbl b/arch/mips/kernel/syscalls/syscall_n32.tbl
index a842b41c8e06..83cfc9eb6b88 100644
--- a/arch/mips/kernel/syscalls/syscall_n32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n32.tbl
@@ -395,3 +395,8 @@
 454	n32	futex_wake			sys_futex_wake
 455	n32	futex_wait			sys_futex_wait
 456	n32	futex_requeue			sys_futex_requeue
+457	n32	statmount			sys_statmount
+458	n32	listmount			sys_listmount
+459	n32	lsm_get_self_attr		sys_lsm_get_self_attr
+460	n32	lsm_set_self_attr		sys_lsm_set_self_attr
+461	n32	lsm_list_modules		sys_lsm_list_modules
diff --git a/arch/mips/kernel/syscalls/syscall_n64.tbl b/arch/mips/kernel/syscalls/syscall_n64.tbl
index 116ff501bf92..532b855df589 100644
--- a/arch/mips/kernel/syscalls/syscall_n64.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n64.tbl
@@ -371,3 +371,8 @@
 454	n64	futex_wake			sys_futex_wake
 455	n64	futex_wait			sys_futex_wait
 456	n64	futex_requeue			sys_futex_requeue
+457	n64	statmount			sys_statmount
+458	n64	listmount			sys_listmount
+459	n64	lsm_get_self_attr		sys_lsm_get_self_attr
+460	n64	lsm_set_self_attr		sys_lsm_set_self_attr
+461	n64	lsm_list_modules		sys_lsm_list_modules
diff --git a/arch/mips/kernel/syscalls/syscall_o32.tbl b/arch/mips/kernel/syscalls/syscall_o32.tbl
index 525cc54bc63b..f45c9530ea93 100644
--- a/arch/mips/kernel/syscalls/syscall_o32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_o32.tbl
@@ -444,3 +444,8 @@
 454	o32	futex_wake			sys_futex_wake
 455	o32	futex_wait			sys_futex_wait
 456	o32	futex_requeue			sys_futex_requeue
+457	o32	statmount			sys_statmount
+458	o32	listmount			sys_listmount
+459	o32	lsm_get_self_attr		sys_lsm_get_self_attr
+460	o32	lsm_set_self_attr		sys_lsm_set_self_attr
+461	o32	lsm_list_modules		sys_lsm_list_modules
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 246c6a6b0261..a1c1cb5de913 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -2007,7 +2007,13 @@ unsigned long vi_handlers[64];
 
 void reserve_exception_space(phys_addr_t addr, unsigned long size)
 {
-	memblock_reserve(addr, size);
+	/*
+	 * reserve exception space on CPUs other than CPU0
+	 * is too late, since memblock is unavailable when APs
+	 * up
+	 */
+	if (smp_processor_id() == 0)
+		memblock_reserve(addr, size);
 }
 
 void __init *set_except_vector(int n, void *addr)
@@ -2055,110 +2061,71 @@ static void do_default_vi(void)
 	panic("Caught unexpected vectored interrupt.");
 }
 
-static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
+void *set_vi_handler(int n, vi_handler_t addr)
 {
+	extern const u8 except_vec_vi[];
+	extern const u8 except_vec_vi_ori[], except_vec_vi_end[];
+	extern const u8 rollback_except_vec_vi[];
 	unsigned long handler;
 	unsigned long old_handler = vi_handlers[n];
 	int srssets = current_cpu_data.srsets;
 	u16 *h;
 	unsigned char *b;
+	const u8 *vec_start;
+	int ori_offset;
+	int handler_len;
 
 	BUG_ON(!cpu_has_veic && !cpu_has_vint);
 
 	if (addr == NULL) {
 		handler = (unsigned long) do_default_vi;
-		srs = 0;
 	} else
 		handler = (unsigned long) addr;
 	vi_handlers[n] = handler;
 
 	b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING);
 
-	if (srs >= srssets)
-		panic("Shadow register set %d not supported", srs);
-
 	if (cpu_has_veic) {
 		if (board_bind_eic_interrupt)
-			board_bind_eic_interrupt(n, srs);
+			board_bind_eic_interrupt(n, 0);
 	} else if (cpu_has_vint) {
 		/* SRSMap is only defined if shadow sets are implemented */
 		if (srssets > 1)
-			change_c0_srsmap(0xf << n*4, srs << n*4);
+			change_c0_srsmap(0xf << n*4, 0 << n*4);
 	}
 
-	if (srs == 0) {
-		/*
-		 * If no shadow set is selected then use the default handler
-		 * that does normal register saving and standard interrupt exit
-		 */
-		extern const u8 except_vec_vi[], except_vec_vi_lui[];
-		extern const u8 except_vec_vi_ori[], except_vec_vi_end[];
-		extern const u8 rollback_except_vec_vi[];
-		const u8 *vec_start = using_rollback_handler() ?
-				      rollback_except_vec_vi : except_vec_vi;
+	vec_start = using_rollback_handler() ? rollback_except_vec_vi :
+					       except_vec_vi;
 #if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_BIG_ENDIAN)
-		const int lui_offset = except_vec_vi_lui - vec_start + 2;
-		const int ori_offset = except_vec_vi_ori - vec_start + 2;
+	ori_offset = except_vec_vi_ori - vec_start + 2;
 #else
-		const int lui_offset = except_vec_vi_lui - vec_start;
-		const int ori_offset = except_vec_vi_ori - vec_start;
+	ori_offset = except_vec_vi_ori - vec_start;
 #endif
-		const int handler_len = except_vec_vi_end - vec_start;
+	handler_len = except_vec_vi_end - vec_start;
 
-		if (handler_len > VECTORSPACING) {
-			/*
-			 * Sigh... panicing won't help as the console
-			 * is probably not configured :(
-			 */
-			panic("VECTORSPACING too small");
-		}
-
-		set_handler(((unsigned long)b - ebase), vec_start,
-#ifdef CONFIG_CPU_MICROMIPS
-				(handler_len - 1));
-#else
-				handler_len);
-#endif
-		h = (u16 *)(b + lui_offset);
-		*h = (handler >> 16) & 0xffff;
-		h = (u16 *)(b + ori_offset);
-		*h = (handler & 0xffff);
-		local_flush_icache_range((unsigned long)b,
-					 (unsigned long)(b+handler_len));
-	}
-	else {
+	if (handler_len > VECTORSPACING) {
 		/*
-		 * In other cases jump directly to the interrupt handler. It
-		 * is the handler's responsibility to save registers if required
-		 * (eg hi/lo) and return from the exception using "eret".
+		 * Sigh... panicing won't help as the console
+		 * is probably not configured :(
 		 */
-		u32 insn;
+		panic("VECTORSPACING too small");
+	}
 
-		h = (u16 *)b;
-		/* j handler */
+	set_handler(((unsigned long)b - ebase), vec_start,
 #ifdef CONFIG_CPU_MICROMIPS
-		insn = 0xd4000000 | (((u32)handler & 0x07ffffff) >> 1);
+			(handler_len - 1));
 #else
-		insn = 0x08000000 | (((u32)handler & 0x0fffffff) >> 2);
+			handler_len);
 #endif
-		h[0] = (insn >> 16) & 0xffff;
-		h[1] = insn & 0xffff;
-		h[2] = 0;
-		h[3] = 0;
-		local_flush_icache_range((unsigned long)b,
-					 (unsigned long)(b+8));
-	}
+	/* insert offset into vi_handlers[] */
+	h = (u16 *)(b + ori_offset);
+	*h = n * sizeof(handler);
+	local_flush_icache_range((unsigned long)b,
+				 (unsigned long)(b+handler_len));
 
 	return (void *)old_handler;
 }
 
-void *set_vi_handler(int n, vi_handler_t addr)
-{
-	return set_vi_srs_handler(n, addr, 0);
-}
-
-extern void tlb_init(void);
-
 /*
  * Timer interrupt
  */
@@ -2418,7 +2385,7 @@ void __init trap_init(void)
 		set_except_vector(i, handle_reserved);
 
 	/*
-	 * Copy the EJTAG debug exception vector handler code to it's final
+	 * Copy the EJTAG debug exception vector handler code to its final
 	 * destination.
 	 */
 	if (cpu_has_ejtag && board_ejtag_handler_setup)
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index f4cf94e92ec3..db652c99b72e 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -91,6 +91,7 @@
 #include <asm/inst.h>
 #include <asm/unaligned-emul.h>
 #include <asm/mmu_context.h>
+#include <asm/traps.h>
 #include <linux/uaccess.h>
 
 #include "access-helper.h"
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index e9a0cfd02ae2..737d0d4fdcd3 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -6,9 +6,9 @@
  * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
  * Copyright (C) 2013 Imagination Technologies Ltd.
  *
- * VPE spport module for loading a MIPS SP program into VPE1. The SP
+ * VPE support module for loading a MIPS SP program into VPE1. The SP
  * environment is rather simple since there are no TLBs. It needs
- * to be relocatable (or partiall linked). Initialize your stack in
+ * to be relocatable (or partially linked). Initialize your stack in
  * the startup-code. The loader looks for the symbol __start and sets
  * up the execution to resume from there. To load and run, simply do
  * a cat SP 'binary' to the /dev/vpe1 device.
diff --git a/arch/mips/kvm/Kconfig b/arch/mips/kvm/Kconfig
index a8cdba75f98d..18e7a17d5115 100644
--- a/arch/mips/kvm/Kconfig
+++ b/arch/mips/kvm/Kconfig
@@ -20,13 +20,11 @@ config KVM
 	depends on HAVE_KVM
 	depends on MIPS_FP_SUPPORT
 	select EXPORT_UASM
-	select PREEMPT_NOTIFIERS
+	select KVM_COMMON
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
-	select HAVE_KVM_EVENTFD
 	select HAVE_KVM_VCPU_ASYNC_IOCTL
 	select KVM_MMIO
-	select MMU_NOTIFIER
-	select INTERVAL_TREE
+	select KVM_GENERIC_MMU_NOTIFIER
 	select KVM_GENERIC_HARDWARE_ENABLING
 	help
 	  Support for hosting Guest kernels.
diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c
index e64372b8f66a..0feec52222fb 100644
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -531,7 +531,7 @@ static void kvm_mips_resume_hrtimer(struct kvm_vcpu *vcpu,
  * to be used for a period of time, but the exact ktime corresponding to the
  * final Count that must be restored is not known.
  *
- * It is gauranteed that a timer interrupt immediately after restore will be
+ * It is guaranteed that a timer interrupt immediately after restore will be
  * handled, but not if CP0_Compare is exactly at @count. That case should
  * already be handled when the hardware timer state is saved.
  *
diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
index a3cf29365858..0c45767eacf6 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -108,10 +108,9 @@ void __init prom_init(void)
 	prom_init_cmdline();
 
 #if defined(CONFIG_MIPS_MT_SMP)
-	if (cpu_has_mipsmt) {
-		lantiq_smp_ops = vsmp_smp_ops;
+	lantiq_smp_ops = vsmp_smp_ops;
+	if (cpu_has_mipsmt)
 		lantiq_smp_ops.init_secondary = lantiq_init_secondary;
-		register_smp_ops(&lantiq_smp_ops);
-	}
+	register_smp_ops(&lantiq_smp_ops);
 #endif
 }
diff --git a/arch/mips/loongson2ef/common/platform.c b/arch/mips/loongson2ef/common/platform.c
index 0084820cffaa..b10300a527af 100644
--- a/arch/mips/loongson2ef/common/platform.c
+++ b/arch/mips/loongson2ef/common/platform.c
@@ -17,7 +17,7 @@ static int __init loongson2_cpufreq_init(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
-	/* Only 2F revision and it's successors support CPUFreq */
+	/* Only 2F revision and its successors support CPUFreq */
 	if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F)
 		return platform_device_register(&loongson2_cpufreq_device);
 
diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
index f25caa6aa9d3..553142c1f14f 100644
--- a/arch/mips/loongson64/init.c
+++ b/arch/mips/loongson64/init.c
@@ -103,6 +103,9 @@ void __init szmem(unsigned int node)
 	if (loongson_sysconf.vgabios_addr)
 		memblock_reserve(virt_to_phys((void *)loongson_sysconf.vgabios_addr),
 				SZ_256K);
+	/* set nid for reserved memory */
+	memblock_set_node((u64)node << 44, (u64)(node + 1) << 44,
+			&memblock.reserved, node);
 }
 
 #ifndef CONFIG_NUMA
diff --git a/arch/mips/loongson64/numa.c b/arch/mips/loongson64/numa.c
index 8f61e93c0c5b..68dafd6d3e25 100644
--- a/arch/mips/loongson64/numa.c
+++ b/arch/mips/loongson64/numa.c
@@ -132,6 +132,8 @@ static void __init node_mem_init(unsigned int node)
 
 		/* Reserve pfn range 0~node[0]->node_start_pfn */
 		memblock_reserve(0, PAGE_SIZE * start_pfn);
+		/* set nid for reserved memory on node 0 */
+		memblock_set_node(0, 1ULL << 44, &memblock.reserved, 0);
 	}
 }
 
diff --git a/arch/mips/loongson64/smp.c b/arch/mips/loongson64/smp.c
index 498bdc1bb0ed..5a990cdef91a 100644
--- a/arch/mips/loongson64/smp.c
+++ b/arch/mips/loongson64/smp.c
@@ -516,7 +516,7 @@ static void __init loongson3_prepare_cpus(unsigned int max_cpus)
 }
 
 /*
- * Setup the PC, SP, and GP of a secondary processor and start it runing!
+ * Setup the PC, SP, and GP of a secondary processor and start it running!
  */
 static int loongson3_boot_secondary(int cpu, struct task_struct *idle)
 {
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 187d1c16361c..10413b6f6662 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1485,10 +1485,6 @@ static void loongson3_sc_init(void)
 	return;
 }
 
-extern int r5k_sc_init(void);
-extern int rm7k_sc_init(void);
-extern int mips_sc_init(void);
-
 static void setup_scache(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -1654,7 +1650,7 @@ static void coherency_setup(void)
 
 	/*
 	 * c0_status.cu=0 specifies that updates by the sc instruction use
-	 * the coherency mode specified by the TLB; 1 means cachable
+	 * the coherency mode specified by the TLB; 1 means cacheable
 	 * coherent update on write will be used.  Not all processors have
 	 * this bit and; some wire it to zero, others like Toshiba had the
 	 * silly idea of putting something else there ...
@@ -1828,7 +1824,7 @@ static struct notifier_block r4k_cache_pm_notifier_block = {
 	.notifier_call = r4k_cache_pm_notifier,
 };
 
-int __init r4k_cache_init_pm(void)
+static int __init r4k_cache_init_pm(void)
 {
 	return cpu_pm_register_notifier(&r4k_cache_pm_notifier_block);
 }
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 7f830634dbe7..df1ced4fc3b5 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -205,22 +205,13 @@ static inline void setup_protection_map(void)
 
 void cpu_cache_init(void)
 {
-	if (cpu_has_3k_cache) {
-		extern void __weak r3k_cache_init(void);
-
+	if (IS_ENABLED(CONFIG_CPU_R3000) && cpu_has_3k_cache)
 		r3k_cache_init();
-	}
-	if (cpu_has_4k_cache) {
-		extern void __weak r4k_cache_init(void);
-
+	if (IS_ENABLED(CONFIG_CPU_R4K_CACHE_TLB) && cpu_has_4k_cache)
 		r4k_cache_init();
-	}
-
-	if (cpu_has_octeon_cache) {
-		extern void __weak octeon_cache_init(void);
 
+	if (IS_ENABLED(CONFIG_CPU_CAVIUM_OCTEON) && cpu_has_octeon_cache)
 		octeon_cache_init();
-	}
 
 	setup_protection_map();
 }
diff --git a/arch/mips/mm/cex-gen.S b/arch/mips/mm/cex-gen.S
index 45dff5cd4b8e..e528583d1331 100644
--- a/arch/mips/mm/cex-gen.S
+++ b/arch/mips/mm/cex-gen.S
@@ -25,7 +25,7 @@
 	 * This is a very bad place to be.  Our cache error
 	 * detection has triggered.  If we have write-back data
 	 * in the cache, we may not be able to recover.	 As a
-	 * first-order desperate measure, turn off KSEG0 cacheing.
+	 * first-order desperate measure, turn off KSEG0 caching.
 	 */
 	mfc0	k0,CP0_CONFIG
 	li	k1,~CONF_CM_CMASK
diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c
index 3c4fc97b9f39..0f3cec663a12 100644
--- a/arch/mips/mm/dma-noncoherent.c
+++ b/arch/mips/mm/dma-noncoherent.c
@@ -138,7 +138,7 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
 
 #ifdef CONFIG_ARCH_HAS_SETUP_DMA_OPS
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-		const struct iommu_ops *iommu, bool coherent)
+		bool coherent)
 {
 	dev->dma_coherent = coherent;
 }
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index d7878208bd3f..aaa9a242ebba 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -26,6 +26,7 @@
 #include <asm/mmu_context.h>
 #include <asm/ptrace.h>
 #include <asm/highmem.h>		/* For VMALLOC_END */
+#include <asm/traps.h>
 #include <linux/kdebug.h>
 
 int show_unhandled_signals = 1;
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 5dcb525a8995..39f129205b0c 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -38,6 +38,7 @@
 #include <asm/dma.h>
 #include <asm/maar.h>
 #include <asm/mmu_context.h>
+#include <asm/mmzone.h>
 #include <asm/sections.h>
 #include <asm/pgalloc.h>
 #include <asm/tlb.h>
@@ -421,8 +422,17 @@ void __init paging_init(void)
 		       " %ldk highmem ignored\n",
 		       (highend_pfn - max_low_pfn) << (PAGE_SHIFT - 10));
 		max_zone_pfns[ZONE_HIGHMEM] = max_low_pfn;
+
+		max_mapnr = max_low_pfn;
+	} else if (highend_pfn) {
+		max_mapnr = highend_pfn;
+	} else {
+		max_mapnr = max_low_pfn;
 	}
+#else
+	max_mapnr = max_low_pfn;
 #endif
+	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
 
 	free_area_init(max_zone_pfns);
 }
@@ -458,13 +468,6 @@ void __init mem_init(void)
 	 */
 	BUILD_BUG_ON(IS_ENABLED(CONFIG_32BIT) && (PFN_PTE_SHIFT > PAGE_SHIFT));
 
-#ifdef CONFIG_HIGHMEM
-	max_mapnr = highend_pfn ? highend_pfn : max_low_pfn;
-#else
-	max_mapnr = max_low_pfn;
-#endif
-	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
-
 	maar_init();
 	memblock_free_all();
 	setup_zero_pages();	/* Setup zeroed pages.  */
diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index b6dad2fd5575..d8243d61ef32 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -72,6 +72,10 @@ void __iomem *ioremap_prot(phys_addr_t phys_addr, unsigned long size,
 	    flags == _CACHE_UNCACHED)
 		return (void __iomem *) CKSEG1ADDR(phys_addr);
 
+	/* Early remaps should use the unmapped regions til' VM is available */
+	if (WARN_ON_ONCE(!slab_is_available()))
+		return NULL;
+
 	/*
 	 * Don't allow anybody to remap RAM that may be allocated by the page
 	 * allocator, since that could lead to races & data clobbering.
diff --git a/arch/mips/mm/pgtable-64.c b/arch/mips/mm/pgtable-64.c
index c76d21f7dffb..1e544827dea9 100644
--- a/arch/mips/mm/pgtable-64.c
+++ b/arch/mips/mm/pgtable-64.c
@@ -89,6 +89,7 @@ void pud_init(void *addr)
 }
 #endif
 
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 pmd_t mk_pmd(struct page *page, pgprot_t prot)
 {
 	pmd_t pmd;
@@ -103,6 +104,7 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 {
 	*pmdp = pmd;
 }
+#endif
 
 void __init pagetable_init(void)
 {
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index 53dfa2b9316b..173f7b36033b 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -23,11 +23,11 @@
 #include <asm/io.h>
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
+#include <asm/setup.h>
+#include <asm/tlbex.h>
 
 #undef DEBUG_TLB
 
-extern void build_tlb_refill_handler(void);
-
 /* CP0 hazard avoidance. */
 #define BARRIER				\
 	__asm__ __volatile__(		\
@@ -183,7 +183,7 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 	int idx, pid;
 
 	/*
-	 * Handle debugger faulting in for debugee.
+	 * Handle debugger faulting in for debuggee.
 	 */
 	if (current->active_mm != vma->vm_mm)
 		return;
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 93c2d695588a..4106084e57d7 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -22,9 +22,9 @@
 #include <asm/hazards.h>
 #include <asm/mmu_context.h>
 #include <asm/tlb.h>
+#include <asm/tlbex.h>
 #include <asm/tlbmisc.h>
-
-extern void build_tlb_refill_handler(void);
+#include <asm/setup.h>
 
 /*
  * LOONGSON-2 has a 4 entry itlb which is a subset of jtlb, LOONGSON-3 has
@@ -301,7 +301,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	int idx, pid;
 
 	/*
-	 * Handle debugger faulting in for debugee.
+	 * Handle debugger faulting in for debuggee.
 	 */
 	if (current->active_mm != vma->vm_mm)
 		return;
@@ -458,6 +458,7 @@ EXPORT_SYMBOL(has_transparent_hugepage);
 
 int temp_tlb_entry;
 
+#ifndef CONFIG_64BIT
 __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
 			       unsigned long entryhi, unsigned long pagemask)
 {
@@ -496,6 +497,7 @@ out:
 	local_irq_restore(flags);
 	return ret;
 }
+#endif
 
 static int ntlb;
 static int __init set_ntlb(char *str)
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index b4e1c783e617..4017fa0e2f68 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -789,7 +789,7 @@ void build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 
 	if (check_for_high_segbits) {
 		/*
-		 * The kernel currently implicitely assumes that the
+		 * The kernel currently implicitly assumes that the
 		 * MIPS SEGBITS parameter for the processor is
 		 * (PGDIR_SHIFT+PGDIR_BITS) or less, and will never
 		 * allocate virtual addresses outside the maximum
@@ -1715,7 +1715,7 @@ iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr,
 /*
  * Check if PTE is present, if not then jump to LABEL. PTR points to
  * the page table where this PTE is located, PTE will be re-loaded
- * with it's original value.
+ * with its original value.
  */
 static void
 build_pte_present(u32 **p, struct uasm_reloc **r,
diff --git a/arch/mips/net/bpf_jit_comp32.c b/arch/mips/net/bpf_jit_comp32.c
index ace5db3fbd17..40a878b672f5 100644
--- a/arch/mips/net/bpf_jit_comp32.c
+++ b/arch/mips/net/bpf_jit_comp32.c
@@ -95,7 +95,7 @@
 /*
  * Mapping of 64-bit eBPF registers to 32-bit native MIPS registers.
  *
- * 1) Native register pairs are ordered according to CPU endiannes, following
+ * 1) Native register pairs are ordered according to CPU endianness, following
  *    the MIPS convention for passing 64-bit arguments and return values.
  * 2) The eBPF return value, arguments and callee-saved registers are mapped
  *    to their native MIPS equivalents.
diff --git a/arch/mips/pci/ops-loongson2.c b/arch/mips/pci/ops-loongson2.c
index 0d1b36ba1c21..068113f5c49d 100644
--- a/arch/mips/pci/ops-loongson2.c
+++ b/arch/mips/pci/ops-loongson2.c
@@ -49,7 +49,7 @@ static int loongson_pcibios_config_access(unsigned char access_type,
 		 */
 #ifdef CONFIG_CS5536
 		/* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr() to
-		 * access the regsters PCI_MSR_ADDR, PCI_MSR_DATA_LO,
+		 * access the registers PCI_MSR_ADDR, PCI_MSR_DATA_LO,
 		 * PCI_MSR_DATA_HI, which is bigger than PCI_MSR_CTRL, so, it
 		 * will not go this branch, but the others. so, no calling dead
 		 * loop here.
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
index 1c722dd0c130..58625d1b6465 100644
--- a/arch/mips/pci/pci-alchemy.c
+++ b/arch/mips/pci/pci-alchemy.c
@@ -453,7 +453,7 @@ static int alchemy_pci_probe(struct platform_device *pdev)
 
 	/* we can't ioremap the entire pci config space because it's too large,
 	 * nor can we dynamically ioremap it because some drivers use the
-	 * PCI config routines from within atomic contex and that becomes a
+	 * PCI config routines from within atomic context and that becomes a
 	 * problem in get_vm_area().  Instead we use one wired TLB entry to
 	 * handle all config accesses for all busses.
 	 */
diff --git a/arch/mips/pci/pci-ar2315.c b/arch/mips/pci/pci-ar2315.c
index e17d862cfa4c..a925842ee125 100644
--- a/arch/mips/pci/pci-ar2315.c
+++ b/arch/mips/pci/pci-ar2315.c
@@ -16,7 +16,7 @@
  * the CFG_SEL bit in the PCI_MISC_CONFIG register.
  *
  * Devices on the bus can perform DMA requests via chip BAR1. PCI host
- * controller BARs are programmend as if an external device is programmed.
+ * controller BARs are programmed as if an external device is programmed.
  * Which means that during configuration, IDSEL pin of the chip should be
  * asserted.
  *
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index d85cbf84e41c..973faea61cad 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -7,6 +7,9 @@
  * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
+
+#include <linux/io.h>
+
 #include <asm/sn/addrs.h>
 #include <asm/sn/types.h>
 #include <asm/sn/klconfig.h>
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index 80f7293166bb..68a8cefed420 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -152,7 +152,7 @@ static int ltq_pci_startup(struct platform_device *pdev)
 		temp_buffer &= ~0xf0000;
 	/* enable internal arbiter */
 	temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
-	/* enable internal PCI master reqest */
+	/* enable internal PCI master request */
 	temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
 
 	/* enable EBU request */
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index d19d9d456309..36d12cea3512 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -376,7 +376,7 @@ static void octeon_pci_initialize(void)
 	ctl_status.s.timer = 1;
 	cvmx_write_csr(CVMX_NPI_CTL_STATUS, ctl_status.u64);
 
-	/* Deassert PCI reset and advertize PCX Host Mode Device Capability
+	/* Deassert PCI reset and advertise PCX Host Mode Device Capability
 	   (64b) */
 	cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4);
 	cvmx_read_csr(CVMX_CIU_SOFT_PRST);
diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c
index 68d5211afea8..45ddbaa6c123 100644
--- a/arch/mips/pci/pci-xtalk-bridge.c
+++ b/arch/mips/pci/pci-xtalk-bridge.c
@@ -114,7 +114,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
  *
  * The function is complicated by the ultimate brokenness of the IOC3 chip
  * which is used in SGI systems.  The IOC3 can only handle 32-bit PCI
- * accesses and does only decode parts of it's address space.
+ * accesses and does only decode parts of its address space.
  */
 static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
 				 int where, int size, u32 *value)
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index c9edd3fb380d..2583e318e8c6 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -1037,7 +1037,7 @@ retry:
 			in_fif_p_count = dbg_data.s.data & 0xff;
 		} while (in_fif_p_count != ((old_in_fif_p_count+1) & 0xff));
 
-		/* Update in_fif_p_count for it's offset with respect to out_p_count */
+		/* Update in_fif_p_count for its offset with respect to out_p_count */
 		in_fif_p_count = (in_fif_p_count + in_p_offset) & 0xff;
 
 		/* Read the OUT_P_COUNT from the debug select */
diff --git a/arch/mips/power/cpu.c b/arch/mips/power/cpu.c
index a15e29dfc7b3..d8ef7778e535 100644
--- a/arch/mips/power/cpu.c
+++ b/arch/mips/power/cpu.c
@@ -6,6 +6,7 @@
  * Author: Hu Hongbing <huhb@lemote.com>
  *	   Wu Zhangjin <wuzhangjin@gmail.com>
  */
+#include <linux/suspend.h>
 #include <asm/sections.h>
 #include <asm/fpu.h>
 #include <asm/dsp.h>
diff --git a/arch/mips/power/hibernate.c b/arch/mips/power/hibernate.c
index 94ab17c3c49d..192879e76c85 100644
--- a/arch/mips/power/hibernate.c
+++ b/arch/mips/power/hibernate.c
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <linux/suspend.h>
 #include <asm/tlbflush.h>
 
 extern int restore_image(void);
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
index 137781d0bd0a..5a9fd3fe41d7 100644
--- a/arch/mips/ralink/mt7621.c
+++ b/arch/mips/ralink/mt7621.c
@@ -175,7 +175,7 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
 		 * mips_cm_probe() wipes out bootloader
 		 * config for CM regions and we have to configure them
 		 * again. This SoC cannot talk to pamlbus devices
-		 * witout proper iocu region set up.
+		 * without proper iocu region set up.
 		 *
 		 * FIXME: it would be better to do this with values
 		 * from DT, but we need this very early because
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index 27c14ede191e..9877fcc512b1 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -5,7 +5,7 @@
 
 obj-y	:= ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o \
 	   ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o ip27-timer.o \
-	   ip27-hubio.o ip27-xtalk.o
+	   ip27-xtalk.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= ip27-console.o
 obj-$(CONFIG_SMP)		+= ip27-smp.o
diff --git a/arch/mips/sgi-ip27/ip27-berr.c b/arch/mips/sgi-ip27/ip27-berr.c
index 923a63a51cda..9eb497cb5d52 100644
--- a/arch/mips/sgi-ip27/ip27-berr.c
+++ b/arch/mips/sgi-ip27/ip27-berr.c
@@ -22,6 +22,8 @@
 #include <asm/traps.h>
 #include <linux/uaccess.h>
 
+#include "ip27-common.h"
+
 static void dump_hub_information(unsigned long errst0, unsigned long errst1)
 {
 	static char *err_type[2][8] = {
@@ -57,7 +59,7 @@ static void dump_hub_information(unsigned long errst0, unsigned long errst1)
 	       [st0.pi_stat0_fmt.s0_err_type] ? : "invalid");
 }
 
-int ip27_be_handler(struct pt_regs *regs, int is_fixup)
+static int ip27_be_handler(struct pt_regs *regs, int is_fixup)
 {
 	unsigned long errst0, errst1;
 	int data = regs->cp0_cause & 4;
diff --git a/arch/mips/sgi-ip27/ip27-common.h b/arch/mips/sgi-ip27/ip27-common.h
index ed008a08464c..a0059fa13934 100644
--- a/arch/mips/sgi-ip27/ip27-common.h
+++ b/arch/mips/sgi-ip27/ip27-common.h
@@ -10,6 +10,7 @@ extern void hub_rt_clock_event_init(void);
 extern void hub_rtc_init(nasid_t nasid);
 extern void install_cpu_nmi_handler(int slice);
 extern void install_ipi(void);
+extern void ip27_be_init(void);
 extern void ip27_reboot_setup(void);
 extern const struct plat_smp_ops ip27_smp_ops;
 extern unsigned long node_getfirstfree(nasid_t nasid);
@@ -17,4 +18,5 @@ extern void per_cpu_init(void);
 extern void replicate_kernel_text(void);
 extern void setup_replication_mask(void);
 
+
 #endif /* __IP27_COMMON_H */
diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c
deleted file mode 100644
index 8352eb6403b4..000000000000
--- a/arch/mips/sgi-ip27/ip27-hubio.c
+++ /dev/null
@@ -1,185 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1992-1997, 2000-2003 Silicon Graphics, Inc.
- * Copyright (C) 2004 Christoph Hellwig.
- *
- * Support functions for the HUB ASIC - mostly PIO mapping related.
- */
-
-#include <linux/bitops.h>
-#include <linux/string.h>
-#include <linux/mmzone.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/agent.h>
-#include <asm/sn/io.h>
-#include <asm/xtalk/xtalk.h>
-
-
-static int force_fire_and_forget = 1;
-
-/**
- * hub_pio_map	-  establish a HUB PIO mapping
- *
- * @hub:	hub to perform PIO mapping on
- * @widget:	widget ID to perform PIO mapping for
- * @xtalk_addr: xtalk_address that needs to be mapped
- * @size:	size of the PIO mapping
- *
- **/
-unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget,
-			  unsigned long xtalk_addr, size_t size)
-{
-	unsigned i;
-
-	/* use small-window mapping if possible */
-	if ((xtalk_addr % SWIN_SIZE) + size <= SWIN_SIZE)
-		return NODE_SWIN_BASE(nasid, widget) + (xtalk_addr % SWIN_SIZE);
-
-	if ((xtalk_addr % BWIN_SIZE) + size > BWIN_SIZE) {
-		printk(KERN_WARNING "PIO mapping at hub %d widget %d addr 0x%lx"
-				" too big (%ld)\n",
-				nasid, widget, xtalk_addr, size);
-		return 0;
-	}
-
-	xtalk_addr &= ~(BWIN_SIZE-1);
-	for (i = 0; i < HUB_NUM_BIG_WINDOW; i++) {
-		if (test_and_set_bit(i, hub_data(nasid)->h_bigwin_used))
-			continue;
-
-		/*
-		 * The code below does a PIO write to setup an ITTE entry.
-		 *
-		 * We need to prevent other CPUs from seeing our updated
-		 * memory shadow of the ITTE (in the piomap) until the ITTE
-		 * entry is actually set up; otherwise, another CPU might
-		 * attempt a PIO prematurely.
-		 *
-		 * Also, the only way we can know that an entry has been
-		 * received  by the hub and can be used by future PIO reads/
-		 * writes is by reading back the ITTE entry after writing it.
-		 *
-		 * For these two reasons, we PIO read back the ITTE entry
-		 * after we write it.
-		 */
-		IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr);
-		__raw_readq(IIO_ITTE_GET(nasid, i));
-
-		return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE);
-	}
-
-	printk(KERN_WARNING "unable to establish PIO mapping for at"
-			" hub %d widget %d addr 0x%lx\n",
-			nasid, widget, xtalk_addr);
-	return 0;
-}
-
-
-/*
- * hub_setup_prb(nasid, prbnum, credits, conveyor)
- *
- *	Put a PRB into fire-and-forget mode if conveyor isn't set.  Otherwise,
- *	put it into conveyor belt mode with the specified number of credits.
- */
-static void hub_setup_prb(nasid_t nasid, int prbnum, int credits)
-{
-	union iprb_u prb;
-	int prb_offset;
-
-	/*
-	 * Get the current register value.
-	 */
-	prb_offset = IIO_IOPRB(prbnum);
-	prb.iprb_regval = REMOTE_HUB_L(nasid, prb_offset);
-
-	/*
-	 * Clear out some fields.
-	 */
-	prb.iprb_ovflow = 1;
-	prb.iprb_bnakctr = 0;
-	prb.iprb_anakctr = 0;
-
-	/*
-	 * Enable or disable fire-and-forget mode.
-	 */
-	prb.iprb_ff = force_fire_and_forget ? 1 : 0;
-
-	/*
-	 * Set the appropriate number of PIO credits for the widget.
-	 */
-	prb.iprb_xtalkctr = credits;
-
-	/*
-	 * Store the new value to the register.
-	 */
-	REMOTE_HUB_S(nasid, prb_offset, prb.iprb_regval);
-}
-
-/**
- * hub_set_piomode  -  set pio mode for a given hub
- *
- * @nasid:	physical node ID for the hub in question
- *
- * Put the hub into either "PIO conveyor belt" mode or "fire-and-forget" mode.
- * To do this, we have to make absolutely sure that no PIOs are in progress
- * so we turn off access to all widgets for the duration of the function.
- *
- * XXX - This code should really check what kind of widget we're talking
- * to.	Bridges can only handle three requests, but XG will do more.
- * How many can crossbow handle to widget 0?  We're assuming 1.
- *
- * XXX - There is a bug in the crossbow that link reset PIOs do not
- * return write responses.  The easiest solution to this problem is to
- * leave widget 0 (xbow) in fire-and-forget mode at all times.	This
- * only affects pio's to xbow registers, which should be rare.
- **/
-static void hub_set_piomode(nasid_t nasid)
-{
-	u64 ii_iowa;
-	union hubii_wcr_u ii_wcr;
-	unsigned i;
-
-	ii_iowa = REMOTE_HUB_L(nasid, IIO_OUTWIDGET_ACCESS);
-	REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, 0);
-
-	ii_wcr.wcr_reg_value = REMOTE_HUB_L(nasid, IIO_WCR);
-
-	if (ii_wcr.iwcr_dir_con) {
-		/*
-		 * Assume a bridge here.
-		 */
-		hub_setup_prb(nasid, 0, 3);
-	} else {
-		/*
-		 * Assume a crossbow here.
-		 */
-		hub_setup_prb(nasid, 0, 1);
-	}
-
-	/*
-	 * XXX - Here's where we should take the widget type into
-	 * when account assigning credits.
-	 */
-	for (i = HUB_WIDGET_ID_MIN; i <= HUB_WIDGET_ID_MAX; i++)
-		hub_setup_prb(nasid, i, 3);
-
-	REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, ii_iowa);
-}
-
-/*
- * hub_pio_init	 -  PIO-related hub initialization
- *
- * @hub:	hubinfo structure for our hub
- */
-void hub_pio_init(nasid_t nasid)
-{
-	unsigned i;
-
-	/* initialize big window piomaps for this hub */
-	bitmap_zero(hub_data(nasid)->h_bigwin_used, HUB_NUM_BIG_WINDOW);
-	for (i = 0; i < HUB_NUM_BIG_WINDOW; i++)
-		IIO_ITTE_DISABLE(nasid, i);
-
-	hub_set_piomode(nasid);
-}
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index a0dd3bd2b81b..8f5299b269e7 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -23,6 +23,8 @@
 #include <asm/sn/intr.h>
 #include <asm/sn/irq_alloc.h>
 
+#include "ip27-common.h"
+
 struct hub_irq_data {
 	u64	*irq_mask[2];
 	cpuid_t	cpu;
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index f79c48393716..b8ca94cfb4fe 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -23,6 +23,7 @@
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/sections.h>
+#include <asm/sgialib.h>
 
 #include <asm/sn/arch.h>
 #include <asm/sn/agent.h>
diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c
index 84889b57d5ff..fc2816398d0c 100644
--- a/arch/mips/sgi-ip27/ip27-nmi.c
+++ b/arch/mips/sgi-ip27/ip27-nmi.c
@@ -11,6 +11,8 @@
 #include <asm/sn/arch.h>
 #include <asm/sn/agent.h>
 
+#include "ip27-common.h"
+
 #if 0
 #define NODE_NUM_CPUS(n)	CNODE_NUM_CPUS(n)
 #else
@@ -23,16 +25,7 @@
 typedef unsigned long machreg_t;
 
 static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED;
-
-/*
- * Let's see what else we need to do here. Set up sp, gp?
- */
-void nmi_dump(void)
-{
-	void cont_nmi_dump(void);
-
-	cont_nmi_dump();
-}
+static void nmi_dump(void);
 
 void install_cpu_nmi_handler(int slice)
 {
@@ -53,7 +46,7 @@ void install_cpu_nmi_handler(int slice)
  * into the eframe format for the node under consideration.
  */
 
-void nmi_cpu_eframe_save(nasid_t nasid, int slice)
+static void nmi_cpu_eframe_save(nasid_t nasid, int slice)
 {
 	struct reg_struct *nr;
 	int		i;
@@ -129,7 +122,7 @@ void nmi_cpu_eframe_save(nasid_t nasid, int slice)
 	pr_emerg("\n");
 }
 
-void nmi_dump_hub_irq(nasid_t nasid, int slice)
+static void nmi_dump_hub_irq(nasid_t nasid, int slice)
 {
 	u64 mask0, mask1, pend0, pend1;
 
@@ -153,7 +146,7 @@ void nmi_dump_hub_irq(nasid_t nasid, int slice)
  * Copy the cpu registers which have been saved in the IP27prom format
  * into the eframe format for the node under consideration.
  */
-void nmi_node_eframe_save(nasid_t nasid)
+static void nmi_node_eframe_save(nasid_t nasid)
 {
 	int slice;
 
@@ -170,8 +163,7 @@ void nmi_node_eframe_save(nasid_t nasid)
 /*
  * Save the nmi cpu registers for all cpus in the system.
  */
-void
-nmi_eframes_save(void)
+static void nmi_eframes_save(void)
 {
 	nasid_t nasid;
 
@@ -179,8 +171,7 @@ nmi_eframes_save(void)
 		nmi_node_eframe_save(nasid);
 }
 
-void
-cont_nmi_dump(void)
+static void nmi_dump(void)
 {
 #ifndef REAL_NMI_SIGNAL
 	static atomic_t nmied_cpus = ATOMIC_INIT(0);
diff --git a/arch/mips/sgi-ip30/ip30-console.c b/arch/mips/sgi-ip30/ip30-console.c
index b91f8c4fdc78..7c6dcf6e73f7 100644
--- a/arch/mips/sgi-ip30/ip30-console.c
+++ b/arch/mips/sgi-ip30/ip30-console.c
@@ -3,6 +3,7 @@
 #include <linux/io.h>
 
 #include <asm/sn/ioc3.h>
+#include <asm/setup.h>
 
 static inline struct ioc3_uartregs *console_uart(void)
 {
diff --git a/arch/mips/sgi-ip30/ip30-setup.c b/arch/mips/sgi-ip30/ip30-setup.c
index 75a34684e704..e8547636a748 100644
--- a/arch/mips/sgi-ip30/ip30-setup.c
+++ b/arch/mips/sgi-ip30/ip30-setup.c
@@ -14,6 +14,7 @@
 #include <linux/percpu.h>
 #include <linux/memblock.h>
 
+#include <asm/bootinfo.h>
 #include <asm/smp-ops.h>
 #include <asm/sgialib.h>
 #include <asm/time.h>
diff --git a/arch/mips/sgi-ip32/crime.c b/arch/mips/sgi-ip32/crime.c
index a8e0c776ca6c..b8a0e4cfa9ce 100644
--- a/arch/mips/sgi-ip32/crime.c
+++ b/arch/mips/sgi-ip32/crime.c
@@ -18,6 +18,8 @@
 #include <asm/ip32/crime.h>
 #include <asm/ip32/mace.h>
 
+#include "ip32-common.h"
+
 struct sgi_crime __iomem *crime;
 struct sgi_mace __iomem *mace;
 
@@ -39,7 +41,7 @@ void __init crime_init(void)
 	       id, rev, field, (unsigned long) CRIME_BASE);
 }
 
-irqreturn_t crime_memerr_intr(unsigned int irq, void *dev_id)
+irqreturn_t crime_memerr_intr(int irq, void *dev_id)
 {
 	unsigned long stat, addr;
 	int fatal = 0;
@@ -90,7 +92,7 @@ irqreturn_t crime_memerr_intr(unsigned int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-irqreturn_t crime_cpuerr_intr(unsigned int irq, void *dev_id)
+irqreturn_t crime_cpuerr_intr(int irq, void *dev_id)
 {
 	unsigned long stat = crime->cpu_error_stat & CRIME_CPU_ERROR_MASK;
 	unsigned long addr = crime->cpu_error_addr & CRIME_CPU_ERROR_ADDR_MASK;
diff --git a/arch/mips/sgi-ip32/ip32-berr.c b/arch/mips/sgi-ip32/ip32-berr.c
index 478b63b4c808..7cbc27941f92 100644
--- a/arch/mips/sgi-ip32/ip32-berr.c
+++ b/arch/mips/sgi-ip32/ip32-berr.c
@@ -18,6 +18,8 @@
 #include <asm/ptrace.h>
 #include <asm/tlbdebug.h>
 
+#include "ip32-common.h"
+
 static int ip32_be_handler(struct pt_regs *regs, int is_fixup)
 {
 	int data = regs->cp0_cause & 4;
diff --git a/arch/mips/sgi-ip32/ip32-common.h b/arch/mips/sgi-ip32/ip32-common.h
new file mode 100644
index 000000000000..cfc0225b1419
--- /dev/null
+++ b/arch/mips/sgi-ip32/ip32-common.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __IP32_COMMON_H
+#define __IP32_COMMON_H
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+void __init crime_init(void);
+irqreturn_t crime_memerr_intr(int irq, void *dev_id);
+irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
+void __init ip32_be_init(void);
+void ip32_prepare_poweroff(void);
+
+#endif /* __IP32_COMMON_H */
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index e21ea1de05e3..29d04468a06b 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -28,6 +28,8 @@
 #include <asm/ip32/mace.h>
 #include <asm/ip32/ip32_ints.h>
 
+#include "ip32-common.h"
+
 /* issue a PIO read to make sure no PIO writes are pending */
 static inline void flush_crime_bus(void)
 {
@@ -107,10 +109,6 @@ static inline void flush_mace_bus(void)
  * is quite different anyway.
  */
 
-/* Some initial interrupts to set up */
-extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
-extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
-
 /*
  * This is for pure CRIME interrupts - ie not MACE.  The advantage?
  * We get to split the register in half and do faster lookups.
diff --git a/arch/mips/sgi-ip32/ip32-memory.c b/arch/mips/sgi-ip32/ip32-memory.c
index 3fc8d0a0bdfa..5fee33744f67 100644
--- a/arch/mips/sgi-ip32/ip32-memory.c
+++ b/arch/mips/sgi-ip32/ip32-memory.c
@@ -15,6 +15,7 @@
 #include <asm/ip32/crime.h>
 #include <asm/bootinfo.h>
 #include <asm/page.h>
+#include <asm/sgialib.h>
 
 extern void crime_init(void);
 
diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c
index 18d1c115cd53..6bdc1421cda4 100644
--- a/arch/mips/sgi-ip32/ip32-reset.c
+++ b/arch/mips/sgi-ip32/ip32-reset.c
@@ -29,6 +29,8 @@
 #include <asm/ip32/crime.h>
 #include <asm/ip32/ip32_ints.h>
 
+#include "ip32-common.h"
+
 #define POWERDOWN_TIMEOUT	120
 /*
  * Blink frequency during reboot grace period and when panicked.
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
index 8019dae1721a..aeb0805aae57 100644
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -26,8 +26,7 @@
 #include <asm/ip32/mace.h>
 #include <asm/ip32/ip32_ints.h>
 
-extern void ip32_be_init(void);
-extern void crime_init(void);
+#include "ip32-common.h"
 
 #ifdef CONFIG_SGI_O2MACE_ETH
 /*
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 5ae30b78d38d..d9249f5a632e 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -348,7 +348,7 @@ static void final_fixup(struct pci_dev *dev)
 	unsigned char bist;
 	int ret;
 
-	/* Do build-in self test */
+	/* Do built-in self test */
 	ret = pci_read_config_byte(dev, PCI_BIST, &bist);
 	if ((ret != PCIBIOS_SUCCESSFUL) || !(bist & PCI_BIST_CAPABLE))
 		return;
diff --git a/arch/mips/vdso/vgettimeofday.c b/arch/mips/vdso/vgettimeofday.c
index 6b83b6376a4b..604afea3f336 100644
--- a/arch/mips/vdso/vgettimeofday.c
+++ b/arch/mips/vdso/vgettimeofday.c
@@ -9,6 +9,7 @@
  */
 #include <linux/time.h>
 #include <linux/types.h>
+#include <vdso/gettime.h>
 
 #if _MIPS_SIM != _MIPS_SIM_ABI64
 int __vdso_clock_gettime(clockid_t clock,
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index d54464021a61..58d9565dc2c7 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -50,7 +50,7 @@ config ARCH_FORCE_MAX_ORDER
 	default "10"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
diff --git a/arch/nios2/include/asm/cacheflush.h b/arch/nios2/include/asm/cacheflush.h
index 348cea097792..81484a776b33 100644
--- a/arch/nios2/include/asm/cacheflush.h
+++ b/arch/nios2/include/asm/cacheflush.h
@@ -38,6 +38,7 @@ void flush_icache_pages(struct vm_area_struct *vma, struct page *page,
 #define flush_icache_pages flush_icache_pages
 
 #define flush_cache_vmap(start, end)		flush_dcache_range(start, end)
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_dcache_range(start, end)
 
 extern void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
diff --git a/arch/nios2/include/asm/traps.h b/arch/nios2/include/asm/traps.h
index 82a48473280d..afd77bef01c6 100644
--- a/arch/nios2/include/asm/traps.h
+++ b/arch/nios2/include/asm/traps.h
@@ -14,6 +14,8 @@
 
 #ifndef __ASSEMBLY__
 void _exception(int signo, struct pt_regs *regs, int code, unsigned long addr);
+void do_page_fault(struct pt_regs *regs, unsigned long cause,
+		   unsigned long address);
 #endif
 
 #endif /* _ASM_NIOS2_TRAPS_H */
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index d14ccc948a29..5c845e8d59d9 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -25,7 +25,6 @@ config PARISC
 	select RTC_DRV_GENERIC
 	select INIT_ALL_POSSIBLE
 	select BUG
-	select BUILDTIME_TABLE_SORT
 	select HAVE_KERNEL_UNCOMPRESSED
 	select HAVE_PCI
 	select HAVE_PERF_EVENTS
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 920db57b6b4c..316f84f1d15c 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -50,12 +50,12 @@ export CROSS32CC
 
 # Set default cross compiler for kernel build
 ifdef cross_compiling
-	ifeq ($(CROSS_COMPILE),)
+    ifeq ($(CROSS_COMPILE),)
 		CC_SUFFIXES = linux linux-gnu unknown-linux-gnu suse-linux
 		CROSS_COMPILE := $(call cc-cross-prefix, \
 			$(foreach a,$(CC_ARCHES), \
 			$(foreach s,$(CC_SUFFIXES),$(a)-$(s)-)))
-	endif
+    endif
 endif
 
 ifdef CONFIG_DYNAMIC_FTRACE
diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h
index 74d17d7e759d..5937d5edaba1 100644
--- a/arch/parisc/include/asm/assembly.h
+++ b/arch/parisc/include/asm/assembly.h
@@ -576,6 +576,7 @@
 	.section __ex_table,"aw"			!	\
 	.align 4					!	\
 	.word (fault_addr - .), (except_addr - .)	!	\
+	or %r0,%r0,%r0					!	\
 	.previous
 
 
diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h
index b4006f2a9705..ba4c05bc24d6 100644
--- a/arch/parisc/include/asm/cacheflush.h
+++ b/arch/parisc/include/asm/cacheflush.h
@@ -41,6 +41,7 @@ void flush_kernel_vmap_range(void *vaddr, int size);
 void invalidate_kernel_vmap_range(void *vaddr, int size);
 
 #define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
 void flush_dcache_folio(struct folio *folio);
diff --git a/arch/parisc/include/asm/extable.h b/arch/parisc/include/asm/extable.h
new file mode 100644
index 000000000000..4ea23e3d79dc
--- /dev/null
+++ b/arch/parisc/include/asm/extable.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PARISC_EXTABLE_H
+#define __PARISC_EXTABLE_H
+
+#include <asm/ptrace.h>
+#include <linux/compiler.h>
+
+/*
+ * The exception table consists of three addresses:
+ *
+ * - A relative address to the instruction that is allowed to fault.
+ * - A relative address at which the program should continue (fixup routine)
+ * - An asm statement which specifies which CPU register will
+ *   receive -EFAULT when an exception happens if the lowest bit in
+ *   the fixup address is set.
+ *
+ * Note: The register specified in the err_opcode instruction will be
+ * modified at runtime if a fault happens. Register %r0 will be ignored.
+ *
+ * Since relative addresses are used, 32bit values are sufficient even on
+ * 64bit kernel.
+ */
+
+struct pt_regs;
+int fixup_exception(struct pt_regs *regs);
+
+#define ARCH_HAS_RELATIVE_EXTABLE
+struct exception_table_entry {
+	int insn;	/* relative address of insn that is allowed to fault. */
+	int fixup;	/* relative address of fixup routine */
+	int err_opcode; /* sample opcode with register which holds error code */
+};
+
+#define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr, opcode )\
+	".section __ex_table,\"aw\"\n"			   \
+	".align 4\n"					   \
+	".word (" #fault_addr " - .), (" #except_addr " - .)\n" \
+	opcode "\n"					   \
+	".previous\n"
+
+/*
+ * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
+ * (with lowest bit set) for which the fault handler in fixup_exception() will
+ * load -EFAULT on fault into the register specified by the err_opcode instruction,
+ * and zeroes the target register in case of a read fault in get_user().
+ */
+#define ASM_EXCEPTIONTABLE_VAR(__err_var)		\
+	int __err_var = 0
+#define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr, register )\
+	ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1, "or %%r0,%%r0," register)
+
+static inline void swap_ex_entry_fixup(struct exception_table_entry *a,
+				       struct exception_table_entry *b,
+				       struct exception_table_entry tmp,
+				       int delta)
+{
+	a->fixup = b->fixup + delta;
+	b->fixup = tmp.fixup - delta;
+	a->err_opcode = b->err_opcode;
+	b->err_opcode = tmp.err_opcode;
+}
+#define swap_ex_entry_fixup swap_ex_entry_fixup
+
+#endif
diff --git a/arch/parisc/include/asm/io.h b/arch/parisc/include/asm/io.h
index 366537042465..a63190af2f05 100644
--- a/arch/parisc/include/asm/io.h
+++ b/arch/parisc/include/asm/io.h
@@ -132,8 +132,6 @@ static inline void gsc_writeq(unsigned long long val, unsigned long addr)
 
 #define ioremap_wc(addr, size)  \
 	ioremap_prot((addr), (size), _PAGE_IOREMAP)
-#define ioremap_uc(addr, size)  \
-	ioremap_prot((addr), (size), _PAGE_IOREMAP)
 
 #define pci_iounmap			pci_iounmap
 
@@ -267,12 +265,6 @@ extern void iowrite64be(u64 val, void __iomem *addr);
 #define iowrite16_rep iowrite16_rep
 #define iowrite32_rep iowrite32_rep
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
 extern int devmem_is_allowed(unsigned long pfn);
 
 #include <asm-generic/io.h>
diff --git a/arch/parisc/include/asm/jump_label.h b/arch/parisc/include/asm/jump_label.h
index 94428798b6aa..317ebc5edc9f 100644
--- a/arch/parisc/include/asm/jump_label.h
+++ b/arch/parisc/include/asm/jump_label.h
@@ -12,7 +12,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 "nop\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".align %1\n\t"
@@ -29,7 +29,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 "b,n %l[l_yes]\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".align %1\n\t"
diff --git a/arch/parisc/include/asm/kprobes.h b/arch/parisc/include/asm/kprobes.h
index 0a175ac87698..0f42f5c8e3b6 100644
--- a/arch/parisc/include/asm/kprobes.h
+++ b/arch/parisc/include/asm/kprobes.h
@@ -10,9 +10,10 @@
 #ifndef _PARISC_KPROBES_H
 #define _PARISC_KPROBES_H
 
+#include <asm-generic/kprobes.h>
+
 #ifdef CONFIG_KPROBES
 
-#include <asm-generic/kprobes.h>
 #include <linux/types.h>
 #include <linux/ptrace.h>
 #include <linux/notifier.h>
diff --git a/arch/parisc/include/asm/special_insns.h b/arch/parisc/include/asm/special_insns.h
index c822bd0c0e3c..51f40eaf7780 100644
--- a/arch/parisc/include/asm/special_insns.h
+++ b/arch/parisc/include/asm/special_insns.h
@@ -8,7 +8,8 @@
 		"copy %%r0,%0\n"			\
 		"8:\tlpa %%r0(%1),%0\n"			\
 		"9:\n"					\
-		ASM_EXCEPTIONTABLE_ENTRY(8b, 9b)	\
+		ASM_EXCEPTIONTABLE_ENTRY(8b, 9b,	\
+				"or %%r0,%%r0,%%r0")	\
 		: "=&r" (pa)				\
 		: "r" (va)				\
 		: "memory"				\
@@ -22,7 +23,8 @@
 		"copy %%r0,%0\n"			\
 		"8:\tlpa %%r0(%%sr3,%1),%0\n"		\
 		"9:\n"					\
-		ASM_EXCEPTIONTABLE_ENTRY(8b, 9b)	\
+		ASM_EXCEPTIONTABLE_ENTRY(8b, 9b,	\
+				"or %%r0,%%r0,%%r0")	\
 		: "=&r" (pa)				\
 		: "r" (va)				\
 		: "memory"				\
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index 4165079898d9..88d0ae5769dd 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -7,6 +7,7 @@
  */
 #include <asm/page.h>
 #include <asm/cache.h>
+#include <asm/extable.h>
 
 #include <linux/bug.h>
 #include <linux/string.h>
@@ -26,37 +27,6 @@
 #define STD_USER(sr, x, ptr)	__put_user_asm(sr, "std", x, ptr)
 #endif
 
-/*
- * The exception table contains two values: the first is the relative offset to
- * the address of the instruction that is allowed to fault, and the second is
- * the relative offset to the address of the fixup routine. Since relative
- * addresses are used, 32bit values are sufficient even on 64bit kernel.
- */
-
-#define ARCH_HAS_RELATIVE_EXTABLE
-struct exception_table_entry {
-	int insn;	/* relative address of insn that is allowed to fault. */
-	int fixup;	/* relative address of fixup routine */
-};
-
-#define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr )\
-	".section __ex_table,\"aw\"\n"			   \
-	".align 4\n"					   \
-	".word (" #fault_addr " - .), (" #except_addr " - .)\n\t" \
-	".previous\n"
-
-/*
- * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
- * (with lowest bit set) for which the fault handler in fixup_exception() will
- * load -EFAULT into %r29 for a read or write fault, and zeroes the target
- * register in case of a read fault in get_user().
- */
-#define ASM_EXCEPTIONTABLE_REG	29
-#define ASM_EXCEPTIONTABLE_VAR(__variable)		\
-	register long __variable __asm__ ("r29") = 0
-#define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr )\
-	ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1)
-
 #define __get_user_internal(sr, val, ptr)		\
 ({							\
 	ASM_EXCEPTIONTABLE_VAR(__gu_err);		\
@@ -83,7 +53,7 @@ struct exception_table_entry {
 							\
 	__asm__("1: " ldx " 0(%%sr%2,%3),%0\n"		\
 		"9:\n"					\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%1")	\
 		: "=r"(__gu_val), "+r"(__gu_err)        \
 		: "i"(sr), "r"(ptr));			\
 							\
@@ -115,8 +85,8 @@ struct exception_table_entry {
 		"1: ldw 0(%%sr%2,%3),%0\n"		\
 		"2: ldw 4(%%sr%2,%3),%R0\n"		\
 		"9:\n"					\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)	\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%1")	\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b, "%1")	\
 		: "=&r"(__gu_tmp.l), "+r"(__gu_err)	\
 		: "i"(sr), "r"(ptr));			\
 							\
@@ -174,7 +144,7 @@ struct exception_table_entry {
 	__asm__ __volatile__ (					\
 		"1: " stx " %1,0(%%sr%2,%3)\n"			\
 		"9:\n"						\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)		\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%0")	\
 		: "+r"(__pu_err)				\
 		: "r"(x), "i"(sr), "r"(ptr))
 
@@ -186,15 +156,14 @@ struct exception_table_entry {
 		"1: stw %1,0(%%sr%2,%3)\n"			\
 		"2: stw %R1,4(%%sr%2,%3)\n"			\
 		"9:\n"						\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)		\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)		\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%0")	\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b, "%0")	\
 		: "+r"(__pu_err)				\
 		: "r"(__val), "i"(sr), "r"(ptr));		\
 } while (0)
 
 #endif /* !defined(CONFIG_64BIT) */
 
-
 /*
  * Complex access routines -- external declarations
  */
@@ -216,7 +185,4 @@ unsigned long __must_check raw_copy_from_user(void *dst, const void __user *src,
 #define INLINE_COPY_TO_USER
 #define INLINE_COPY_FROM_USER
 
-struct pt_regs;
-int fixup_exception(struct pt_regs *regs);
-
 #endif /* __PARISC_UACCESS_H */
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 268d90a9325b..422f3e1e6d9c 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -58,7 +58,7 @@ int pa_serialize_tlb_flushes __ro_after_init;
 
 struct pdc_cache_info cache_info __ro_after_init;
 #ifndef CONFIG_PA20
-struct pdc_btlb_info btlb_info __ro_after_init;
+struct pdc_btlb_info btlb_info;
 #endif
 
 DEFINE_STATIC_KEY_TRUE(parisc_has_cache);
@@ -264,6 +264,10 @@ parisc_cache_init(void)
 	icache_stride = CAFL_STRIDE(cache_info.ic_conf);
 #undef CAFL_STRIDE
 
+	/* stride needs to be non-zero, otherwise cache flushes will not work */
+	WARN_ON(cache_info.dc_size && dcache_stride == 0);
+	WARN_ON(cache_info.ic_size && icache_stride == 0);
+
 	if ((boot_cpu_data.pdc.capabilities & PDC_MODEL_NVA_MASK) ==
 						PDC_MODEL_NVA_UNSUPPORTED) {
 		printk(KERN_WARNING "parisc_cache_init: Only equivalent aliasing supported!\n");
@@ -850,7 +854,7 @@ SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
 #endif
 			"   fic,m	%3(%4,%0)\n"
 			"2: sync\n"
-			ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b)
+			ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b, "%1")
 			: "+r" (start), "+r" (error)
 			: "r" (end), "r" (dcache_stride), "i" (SR_USER));
 	}
@@ -865,7 +869,7 @@ SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
 #endif
 			"   fdc,m	%3(%4,%0)\n"
 			"2: sync\n"
-			ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b)
+			ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b, "%1")
 			: "+r" (start), "+r" (error)
 			: "r" (end), "r" (icache_stride), "i" (SR_USER));
 	}
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index 25f9b9e9d6df..c7ff339732ba 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -742,7 +742,7 @@ parse_tree_node(struct device *parent, int index, struct hardware_path *modpath)
 	};
 
 	if (device_for_each_child(parent, &recurse_data, descend_children))
-		{ /* nothing */ };
+		{ /* nothing */ }
 
 	return d.dev;
 }
@@ -1004,6 +1004,9 @@ static __init int qemu_print_iodc_data(struct device *lin_dev, void *data)
 
 	pr_info("\n");
 
+	/* Prevent hung task messages when printing on serial console */
+	cond_resched();
+
 	pr_info("#define HPA_%08lx_DESCRIPTION \"%s\"\n",
 		hpa, parisc_hardware_description(&dev->id));
 
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index 904ca3b9e7a7..c69f6d5946e9 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -123,10 +123,10 @@ static unsigned long f_extend(unsigned long address)
 #ifdef CONFIG_64BIT
 	if(unlikely(parisc_narrow_firmware)) {
 		if((address & 0xff000000) == 0xf0000000)
-			return 0xf0f0f0f000000000UL | (u32)address;
+			return (0xfffffff0UL << 32) | (u32)address;
 
 		if((address & 0xf0000000) == 0xf0000000)
-			return 0xffffffff00000000UL | (u32)address;
+			return (0xffffffffUL << 32) | (u32)address;
 	}
 #endif
 	return address;
diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c
index d1defb9ede70..621a4b386ae4 100644
--- a/arch/parisc/kernel/ftrace.c
+++ b/arch/parisc/kernel/ftrace.c
@@ -78,7 +78,7 @@ asmlinkage void notrace __hot ftrace_function_trampoline(unsigned long parent,
 #endif
 }
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_FUNCTION_GRAPH_TRACER)
 int ftrace_enable_ftrace_graph_caller(void)
 {
 	static_key_enable(&ftrace_graph_enable.key);
diff --git a/arch/parisc/kernel/kexec_file.c b/arch/parisc/kernel/kexec_file.c
index 8c534204f0fd..3fc82130b6c3 100644
--- a/arch/parisc/kernel/kexec_file.c
+++ b/arch/parisc/kernel/kexec_file.c
@@ -38,8 +38,8 @@ static void *elf_load(struct kimage *image, char *kernel_buf,
 	for (i = 0; i < image->nr_segments; i++)
 		image->segment[i].mem = __pa(image->segment[i].mem);
 
-	pr_debug("Loaded the kernel at 0x%lx, entry at 0x%lx\n",
-		 kernel_load_addr, image->start);
+	kexec_dprintk("Loaded the kernel at 0x%lx, entry at 0x%lx\n",
+		      kernel_load_addr, image->start);
 
 	if (initrd != NULL) {
 		kbuf.buffer = initrd;
@@ -51,7 +51,7 @@ static void *elf_load(struct kimage *image, char *kernel_buf,
 		if (ret)
 			goto out;
 
-		pr_debug("Loaded initrd at 0x%lx\n", kbuf.mem);
+		kexec_dprintk("Loaded initrd at 0x%lx\n", kbuf.mem);
 		image->arch.initrd_start = kbuf.mem;
 		image->arch.initrd_end = kbuf.mem + initrd_len;
 	}
@@ -68,7 +68,7 @@ static void *elf_load(struct kimage *image, char *kernel_buf,
 		if (ret)
 			goto out;
 
-		pr_debug("Loaded cmdline at 0x%lx\n", kbuf.mem);
+		kexec_dprintk("Loaded cmdline at 0x%lx\n", kbuf.mem);
 		image->arch.cmdline = kbuf.mem;
 	}
 out:
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index e95a977ba5f3..bf73562706b2 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -172,7 +172,6 @@ static int __init processor_probe(struct parisc_device *dev)
 	p->cpu_num = cpu_info.cpu_num;
 	p->cpu_loc = cpu_info.cpu_loc;
 
-	set_cpu_possible(cpuid, true);
 	store_cpu_topology(cpuid);
 
 #ifdef CONFIG_SMP
@@ -474,13 +473,6 @@ static struct parisc_driver cpu_driver __refdata = {
  */
 void __init processor_init(void)
 {
-	unsigned int cpu;
-
 	reset_cpu_topology();
-
-	/* reset possible mask. We will mark those which are possible. */
-	for_each_possible_cpu(cpu)
-		set_cpu_possible(cpu, false);
-
 	register_parisc_driver(&cpu_driver);
 }
diff --git a/arch/parisc/kernel/syscalls/syscall.tbl b/arch/parisc/kernel/syscalls/syscall.tbl
index a47798fed54e..b236a84c4e12 100644
--- a/arch/parisc/kernel/syscalls/syscall.tbl
+++ b/arch/parisc/kernel/syscalls/syscall.tbl
@@ -455,3 +455,8 @@
 454	common	futex_wake			sys_futex_wake
 455	common	futex_wait			sys_futex_wait
 456	common	futex_requeue			sys_futex_requeue
+457	common	statmount			sys_statmount
+458	common	listmount			sys_listmount
+459	common	lsm_get_self_attr		sys_lsm_get_self_attr
+460	common	lsm_set_self_attr		sys_lsm_set_self_attr
+461	common	lsm_list_modules		sys_lsm_list_modules
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index ce25acfe4889..c520e551a165 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -120,8 +120,8 @@ static int emulate_ldh(struct pt_regs *regs, int toreg)
 "2:	ldbs	1(%%sr1,%3), %0\n"
 "	depw	%2, 23, 24, %0\n"
 "3:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%1")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%1")
 	: "+r" (val), "+r" (ret), "=&r" (temp1)
 	: "r" (saddr), "r" (regs->isr) );
 
@@ -152,8 +152,8 @@ static int emulate_ldw(struct pt_regs *regs, int toreg, int flop)
 "	mtctl	%2,11\n"
 "	vshd	%0,%3,%0\n"
 "3:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%1")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%1")
 	: "+r" (val), "+r" (ret), "=&r" (temp1), "=&r" (temp2)
 	: "r" (saddr), "r" (regs->isr) );
 
@@ -189,8 +189,8 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
 "	mtsar	%%r19\n"
 "	shrpd	%0,%%r20,%%sar,%0\n"
 "3:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%1")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%1")
 	: "=r" (val), "+r" (ret)
 	: "0" (val), "r" (saddr), "r" (regs->isr)
 	: "r19", "r20" );
@@ -209,9 +209,9 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
 "	vshd	%0,%R0,%0\n"
 "	vshd	%R0,%4,%R0\n"
 "4:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 4b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 4b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 4b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 4b, "%1")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 4b, "%1")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 4b, "%1")
 	: "+r" (val), "+r" (ret), "+r" (saddr), "=&r" (shift), "=&r" (temp1)
 	: "r" (regs->isr) );
     }
@@ -244,8 +244,8 @@ static int emulate_sth(struct pt_regs *regs, int frreg)
 "1:	stb %1, 0(%%sr1, %3)\n"
 "2:	stb %2, 1(%%sr1, %3)\n"
 "3:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%0")
 	: "+r" (ret), "=&r" (temp1)
 	: "r" (val), "r" (regs->ior), "r" (regs->isr) );
 
@@ -285,8 +285,8 @@ static int emulate_stw(struct pt_regs *regs, int frreg, int flop)
 "	stw	%%r20,0(%%sr1,%2)\n"
 "	stw	%%r21,4(%%sr1,%2)\n"
 "3:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%0")
 	: "+r" (ret)
 	: "r" (val), "r" (regs->ior), "r" (regs->isr)
 	: "r19", "r20", "r21", "r22", "r1" );
@@ -329,10 +329,10 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
 "3:	std	%%r20,0(%%sr1,%2)\n"
 "4:	std	%%r21,8(%%sr1,%2)\n"
 "5:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 5b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 5b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 5b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 5b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 5b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 5b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 5b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 5b, "%0")
 	: "+r" (ret)
 	: "r" (val), "r" (regs->ior), "r" (regs->isr)
 	: "r19", "r20", "r21", "r22", "r1" );
@@ -357,11 +357,11 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
 "4:	stw	%%r1,4(%%sr1,%2)\n"
 "5:	stw	%R1,8(%%sr1,%2)\n"
 "6:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 6b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 6b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 6b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 6b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(5b, 6b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 6b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 6b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 6b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 6b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(5b, 6b, "%0")
 	: "+r" (ret)
 	: "r" (val), "r" (regs->ior), "r" (regs->isr)
 	: "r19", "r20", "r21", "r1" );
diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c
index 27ae40a443b8..f7e0fee5ee55 100644
--- a/arch/parisc/kernel/unwind.c
+++ b/arch/parisc/kernel/unwind.c
@@ -228,10 +228,8 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
 #ifdef CONFIG_IRQSTACKS
 	extern void * const _call_on_stack;
 #endif /* CONFIG_IRQSTACKS */
-	void *ptr;
 
-	ptr = dereference_kernel_function_descriptor(&handle_interruption);
-	if (pc_is_kernel_fn(pc, ptr)) {
+	if (pc_is_kernel_fn(pc, handle_interruption)) {
 		struct pt_regs *regs = (struct pt_regs *)(info->sp - frame_size - PT_SZ_ALGN);
 		dbg("Unwinding through handle_interruption()\n");
 		info->prev_sp = regs->gr[30];
@@ -239,13 +237,13 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
 		return 1;
 	}
 
-	if (pc_is_kernel_fn(pc, ret_from_kernel_thread) ||
-	    pc_is_kernel_fn(pc, syscall_exit)) {
+	if (pc == (unsigned long)&ret_from_kernel_thread ||
+	    pc == (unsigned long)&syscall_exit) {
 		info->prev_sp = info->prev_ip = 0;
 		return 1;
 	}
 
-	if (pc_is_kernel_fn(pc, intr_return)) {
+	if (pc == (unsigned long)&intr_return) {
 		struct pt_regs *regs;
 
 		dbg("Found intr_return()\n");
@@ -257,14 +255,14 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
 	}
 
 	if (pc_is_kernel_fn(pc, _switch_to) ||
-	    pc_is_kernel_fn(pc, _switch_to_ret)) {
+	    pc == (unsigned long)&_switch_to_ret) {
 		info->prev_sp = info->sp - CALLEE_SAVE_FRAME_SIZE;
 		info->prev_ip = *(unsigned long *)(info->prev_sp - RP_OFFSET);
 		return 1;
 	}
 
 #ifdef CONFIG_IRQSTACKS
-	if (pc_is_kernel_fn(pc, _call_on_stack)) {
+	if (pc == (unsigned long)&_call_on_stack) {
 		info->prev_sp = *(unsigned long *)(info->sp - FRAME_SIZE - REG_SZ);
 		info->prev_ip = *(unsigned long *)(info->sp - FRAME_SIZE - RP_OFFSET);
 		return 1;
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 548051b0b4af..b445e47903cf 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -127,7 +127,7 @@ SECTIONS
 	}
 #endif
 
-	RO_DATA(8)
+	RO_DATA(PAGE_SIZE)
 
 	/* unwind info */
 	. = ALIGN(4);
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index 2fe5b44986e0..c39de84e98b0 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -150,11 +150,16 @@ int fixup_exception(struct pt_regs *regs)
 		 * Fix up get_user() and put_user().
 		 * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() sets the least-significant
 		 * bit in the relative address of the fixup routine to indicate
-		 * that gr[ASM_EXCEPTIONTABLE_REG] should be loaded with
-		 * -EFAULT to report a userspace access error.
+		 * that the register encoded in the "or %r0,%r0,register"
+		 * opcode should be loaded with -EFAULT to report a userspace
+		 * access error.
 		 */
 		if (fix->fixup & 1) {
-			regs->gr[ASM_EXCEPTIONTABLE_REG] = -EFAULT;
+			int fault_error_reg = fix->err_opcode & 0x1f;
+			if (!WARN_ON(!fault_error_reg))
+				regs->gr[fault_error_reg] = -EFAULT;
+			pr_debug("Unalignment fixup of register %d at %pS\n",
+				fault_error_reg, (void*)regs->iaoq[0]);
 
 			/* zero target register for get_user() */
 			if (parisc_acctyp(0, regs->iir) == VM_READ) {
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index a2a3e89f2d9a..f876af56e13f 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -33,6 +33,7 @@
 #include <asm/msgbuf.h>
 #include <asm/sparsemem.h>
 #include <asm/asm-offsets.h>
+#include <asm/shmbuf.h>
 
 extern int  data_start;
 extern void parisc_kernel_start(void);	/* Kernel entry point in head.S */
diff --git a/arch/parisc/video/fbdev.c b/arch/parisc/video/fbdev.c
index 137561d98246..e4f8ac99fc9e 100644
--- a/arch/parisc/video/fbdev.c
+++ b/arch/parisc/video/fbdev.c
@@ -21,6 +21,6 @@ int fb_is_primary_device(struct fb_info *info)
 		return true;
 
 	/* return true if it's the default built-in framebuffer driver */
-	return (sti->info == info);
+	return (sti->dev == info->device);
 }
 EXPORT_SYMBOL(fb_is_primary_device);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 1f11a62809f2..b9fc064d38d2 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -189,6 +189,7 @@ config PPC
 	select EDAC_ATOMIC_SCRUB
 	select EDAC_SUPPORT
 	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY if ARCH_USING_PATCHABLE_FUNCTION_ENTRY
+	select FUNCTION_ALIGNMENT_4B
 	select GENERIC_ATOMIC64			if PPC32
 	select GENERIC_CLOCKEVENTS_BROADCAST	if SMP
 	select GENERIC_CMOS_UPDATE
@@ -858,6 +859,7 @@ config THREAD_SHIFT
 	int "Thread shift" if EXPERT
 	range 13 15
 	default "15" if PPC_256K_PAGES
+	default "15" if PPC_PSERIES || PPC_POWERNV
 	default "14" if PPC64
 	default "13"
 	help
@@ -915,7 +917,7 @@ config ARCH_FORCE_MAX_ORDER
 	default "10"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index ea4033abc07d..8c80b154e814 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -271,7 +271,6 @@ config PPC_EARLY_DEBUG_USBGECKO
 config PPC_EARLY_DEBUG_PS3GELIC
 	bool "Early debugging through the PS3 Ethernet port"
 	depends on PPC_PS3
-	select PS3GELIC_UDBG
 	help
 	  Select this to enable early debugging for the PlayStation3 via
 	  UDP broadcasts sent out through the Ethernet port.
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index f19dbaa1d541..051247027da0 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -10,15 +10,26 @@
 # Rewritten by Cort Dougan and Paul Mackerras
 #
 
+ifdef cross_compiling
+  ifeq ($(CROSS_COMPILE),)
+    # Auto detect cross compiler prefix.
+    # Look for: (powerpc(64(le)?)?)(-unknown)?-linux(-gnu)?-
+    CC_ARCHES := powerpc powerpc64 powerpc64le
+    CC_SUFFIXES := linux linux-gnu unknown-linux-gnu
+    CROSS_COMPILE := $(call cc-cross-prefix, $(foreach a,$(CC_ARCHES), \
+                       $(foreach s,$(CC_SUFFIXES),$(a)-$(s)-)))
+  endif
+endif
+
 HAS_BIARCH	:= $(call cc-option-yn, -m32)
 
 # Set default 32 bits cross compilers for vdso and boot wrapper
 CROSS32_COMPILE ?=
 
 # If we're on a ppc/ppc64/ppc64le machine use that defconfig, otherwise just use
-# ppc64_defconfig because we have nothing better to go on.
+# ppc64le_defconfig because we have nothing better to go on.
 uname := $(shell uname -m)
-KBUILD_DEFCONFIG := $(if $(filter ppc%,$(uname)),$(uname),ppc64)_defconfig
+KBUILD_DEFCONFIG := $(if $(filter ppc%,$(uname)),$(uname),ppc64le)_defconfig
 
 new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
 
@@ -161,7 +172,7 @@ CFLAGS-y += $(CONFIG_TUNE_CPU)
 
 asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1)
 
-KBUILD_CPPFLAGS	+= -I $(srctree)/arch/$(ARCH) $(asinstr)
+KBUILD_CPPFLAGS	+= -I $(srctree)/arch/powerpc $(asinstr)
 KBUILD_AFLAGS	+= $(AFLAGS-y)
 KBUILD_CFLAGS	+= $(call cc-option,-msoft-float)
 KBUILD_CFLAGS	+= $(CFLAGS-y)
@@ -232,7 +243,7 @@ BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.%
 
 PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
 
-boot := arch/$(ARCH)/boot
+boot := arch/powerpc/boot
 
 $(BOOT_TARGETS1): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
@@ -336,7 +347,7 @@ PHONY += $(generated_configs)
 
 define archhelp
   echo '* zImage          - Build default images selected by kernel config'
-  echo '  zImage.*        - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
+  echo '  zImage.*        - Compressed kernel image (arch/powerpc/boot/zImage.*)'
   echo '  uImage          - U-Boot native image format'
   echo '  cuImage.<dt>    - Backwards compatible U-Boot image for older'
   echo '                    versions which do not support device trees'
@@ -347,12 +358,12 @@ define archhelp
   echo '                    (your) ~/bin/$(INSTALLKERNEL) or'
   echo '                    (distribution) /sbin/$(INSTALLKERNEL) or'
   echo '                    install to $$(INSTALL_PATH) and run lilo'
-  echo '  *_defconfig     - Select default config from arch/$(ARCH)/configs'
+  echo '  *_defconfig     - Select default config from arch/powerpc/configs'
   echo ''
   echo '  Targets with <dt> embed a device tree blob inside the image'
   echo '  These targets support board with firmware that does not'
   echo '  support passing a device tree directly.  Replace <dt> with the'
-  echo '  name of a dts file from the arch/$(ARCH)/boot/dts/ directory'
+  echo '  name of a dts file from the arch/powerpc/boot/dts/ directory'
   echo '  (minus the .dts extension).'
   echo
   $(foreach cfg,$(generated_configs),
diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
index d552044c5afc..aa5152ca8120 100644
--- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -367,45 +367,46 @@
 		reg = <0xf0000 0x1000>;
 		interrupts = <18 2 0 0>;
 		fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
-		fsl,tmu-calibration = <0x00000000 0x0000000f
-				       0x00000001 0x00000017
-				       0x00000002 0x0000001e
-				       0x00000003 0x00000026
-				       0x00000004 0x0000002e
-				       0x00000005 0x00000035
-				       0x00000006 0x0000003d
-				       0x00000007 0x00000044
-				       0x00000008 0x0000004c
-				       0x00000009 0x00000053
-				       0x0000000a 0x0000005b
-				       0x0000000b 0x00000064
-
-				       0x00010000 0x00000011
-				       0x00010001 0x0000001c
-				       0x00010002 0x00000024
-				       0x00010003 0x0000002b
-				       0x00010004 0x00000034
-				       0x00010005 0x00000039
-				       0x00010006 0x00000042
-				       0x00010007 0x0000004c
-				       0x00010008 0x00000051
-				       0x00010009 0x0000005a
-				       0x0001000a 0x00000063
-
-				       0x00020000 0x00000013
-				       0x00020001 0x00000019
-				       0x00020002 0x00000024
-				       0x00020003 0x0000002c
-				       0x00020004 0x00000035
-				       0x00020005 0x0000003d
-				       0x00020006 0x00000046
-				       0x00020007 0x00000050
-				       0x00020008 0x00000059
-
-				       0x00030000 0x00000002
-				       0x00030001 0x0000000d
-				       0x00030002 0x00000019
-				       0x00030003 0x00000024>;
+		fsl,tmu-calibration =
+				<0x00000000 0x0000000f>,
+				<0x00000001 0x00000017>,
+				<0x00000002 0x0000001e>,
+				<0x00000003 0x00000026>,
+				<0x00000004 0x0000002e>,
+				<0x00000005 0x00000035>,
+				<0x00000006 0x0000003d>,
+				<0x00000007 0x00000044>,
+				<0x00000008 0x0000004c>,
+				<0x00000009 0x00000053>,
+				<0x0000000a 0x0000005b>,
+				<0x0000000b 0x00000064>,
+
+				<0x00010000 0x00000011>,
+				<0x00010001 0x0000001c>,
+				<0x00010002 0x00000024>,
+				<0x00010003 0x0000002b>,
+				<0x00010004 0x00000034>,
+				<0x00010005 0x00000039>,
+				<0x00010006 0x00000042>,
+				<0x00010007 0x0000004c>,
+				<0x00010008 0x00000051>,
+				<0x00010009 0x0000005a>,
+				<0x0001000a 0x00000063>,
+
+				<0x00020000 0x00000013>,
+				<0x00020001 0x00000019>,
+				<0x00020002 0x00000024>,
+				<0x00020003 0x0000002c>,
+				<0x00020004 0x00000035>,
+				<0x00020005 0x0000003d>,
+				<0x00020006 0x00000046>,
+				<0x00020007 0x00000050>,
+				<0x00020008 0x00000059>,
+
+				<0x00030000 0x00000002>,
+				<0x00030001 0x0000000d>,
+				<0x00030002 0x00000019>,
+				<0x00030003 0x00000024>;
 		#thermal-sensor-cells = <1>;
 	};
 
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index ad0ab33336b8..776788623204 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -447,41 +447,42 @@
 		reg = <0xf0000 0x1000>;
 		interrupts = <18 2 0 0>;
 		fsl,tmu-range = <0xa0000 0x90026 0x8004a 0x1006a>;
-		fsl,tmu-calibration = <0x00000000 0x00000025
-				       0x00000001 0x00000028
-				       0x00000002 0x0000002d
-				       0x00000003 0x00000031
-				       0x00000004 0x00000036
-				       0x00000005 0x0000003a
-				       0x00000006 0x00000040
-				       0x00000007 0x00000044
-				       0x00000008 0x0000004a
-				       0x00000009 0x0000004f
-				       0x0000000a 0x00000054
-
-				       0x00010000 0x0000000d
-				       0x00010001 0x00000013
-				       0x00010002 0x00000019
-				       0x00010003 0x0000001f
-				       0x00010004 0x00000025
-				       0x00010005 0x0000002d
-				       0x00010006 0x00000033
-				       0x00010007 0x00000043
-				       0x00010008 0x0000004b
-				       0x00010009 0x00000053
-
-				       0x00020000 0x00000010
-				       0x00020001 0x00000017
-				       0x00020002 0x0000001f
-				       0x00020003 0x00000029
-				       0x00020004 0x00000031
-				       0x00020005 0x0000003c
-				       0x00020006 0x00000042
-				       0x00020007 0x0000004d
-				       0x00020008 0x00000056
-
-				       0x00030000 0x00000012
-				       0x00030001 0x0000001d>;
+		fsl,tmu-calibration =
+				<0x00000000 0x00000025>,
+				<0x00000001 0x00000028>,
+				<0x00000002 0x0000002d>,
+				<0x00000003 0x00000031>,
+				<0x00000004 0x00000036>,
+				<0x00000005 0x0000003a>,
+				<0x00000006 0x00000040>,
+				<0x00000007 0x00000044>,
+				<0x00000008 0x0000004a>,
+				<0x00000009 0x0000004f>,
+				<0x0000000a 0x00000054>,
+
+				<0x00010000 0x0000000d>,
+				<0x00010001 0x00000013>,
+				<0x00010002 0x00000019>,
+				<0x00010003 0x0000001f>,
+				<0x00010004 0x00000025>,
+				<0x00010005 0x0000002d>,
+				<0x00010006 0x00000033>,
+				<0x00010007 0x00000043>,
+				<0x00010008 0x0000004b>,
+				<0x00010009 0x00000053>,
+
+				<0x00020000 0x00000010>,
+				<0x00020001 0x00000017>,
+				<0x00020002 0x0000001f>,
+				<0x00020003 0x00000029>,
+				<0x00020004 0x00000031>,
+				<0x00020005 0x0000003c>,
+				<0x00020006 0x00000042>,
+				<0x00020007 0x0000004d>,
+				<0x00020008 0x00000056>,
+
+				<0x00030000 0x00000012>,
+				<0x00030001 0x0000001d>;
 		#thermal-sensor-cells = <1>;
 	};
 
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 6e7b9e8fd225..544a65fda77b 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -92,6 +92,7 @@ CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_MEM_SOFT_DIRTY=y
 CONFIG_ZONE_DEVICE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index f279703425d4..66c7b28d7450 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -274,7 +274,6 @@ CONFIG_NET_ACT_POLICE=m
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 2b175ddf82f0..aa8bb0208bcc 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -24,6 +24,7 @@ CONFIG_PS3_VRAM=m
 CONFIG_PS3_LPM=m
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 CONFIG_KEXEC=y
+# CONFIG_PPC64_BIG_ENDIAN_ELF_ABI_V2 is not set
 CONFIG_PPC_4K_PAGES=y
 CONFIG_SCHED_SMT=y
 CONFIG_PM=y
diff --git a/arch/powerpc/crypto/aes-gcm-p10-glue.c b/arch/powerpc/crypto/aes-gcm-p10-glue.c
index 4b6e899895e7..f62ee54076c0 100644
--- a/arch/powerpc/crypto/aes-gcm-p10-glue.c
+++ b/arch/powerpc/crypto/aes-gcm-p10-glue.c
@@ -37,7 +37,7 @@ asmlinkage void aes_p10_gcm_encrypt(u8 *in, u8 *out, size_t len,
 				    void *rkey, u8 *iv, void *Xi);
 asmlinkage void aes_p10_gcm_decrypt(u8 *in, u8 *out, size_t len,
 				    void *rkey, u8 *iv, void *Xi);
-asmlinkage void gcm_init_htable(unsigned char htable[256], unsigned char Xi[16]);
+asmlinkage void gcm_init_htable(unsigned char htable[], unsigned char Xi[]);
 asmlinkage void gcm_ghash_p10(unsigned char *Xi, unsigned char *Htable,
 		unsigned char *aad, unsigned int alen);
 
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index cb77eddca54b..927d585652bc 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -17,12 +17,6 @@
 #define _PAGE_EXEC		0x00001 /* execute permission */
 #define _PAGE_WRITE		0x00002 /* write access allowed */
 #define _PAGE_READ		0x00004	/* read access allowed */
-#define _PAGE_NA		_PAGE_PRIVILEGED
-#define _PAGE_NAX		_PAGE_EXEC
-#define _PAGE_RO		_PAGE_READ
-#define _PAGE_ROX		(_PAGE_READ | _PAGE_EXEC)
-#define _PAGE_RW		(_PAGE_READ | _PAGE_WRITE)
-#define _PAGE_RWX		(_PAGE_READ | _PAGE_WRITE | _PAGE_EXEC)
 #define _PAGE_PRIVILEGED	0x00008 /* kernel access only */
 #define _PAGE_SAO		0x00010 /* Strong access order */
 #define _PAGE_NON_IDEMPOTENT	0x00020 /* non idempotent memory */
@@ -532,8 +526,8 @@ static inline bool pte_user(pte_t pte)
 static inline bool pte_access_permitted(pte_t pte, bool write)
 {
 	/*
-	 * _PAGE_READ is needed for any access and will be
-	 * cleared for PROT_NONE
+	 * _PAGE_READ is needed for any access and will be cleared for
+	 * PROT_NONE. Execute-only mapping via PROT_EXEC also returns false.
 	 */
 	if (!pte_present(pte) || !pte_user(pte) || !pte_read(pte))
 		return false;
diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
index 1950c1b825b4..fd642b729775 100644
--- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
+++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
@@ -158,11 +158,6 @@ static inline void flush_tlb_fix_spurious_fault(struct vm_area_struct *vma,
 	 */
 }
 
-static inline bool __pte_protnone(unsigned long pte)
-{
-	return (pte & (pgprot_val(PAGE_NONE) | _PAGE_RWX)) == pgprot_val(PAGE_NONE);
-}
-
 static inline bool __pte_flags_need_flush(unsigned long oldval,
 					  unsigned long newval)
 {
@@ -179,8 +174,8 @@ static inline bool __pte_flags_need_flush(unsigned long oldval,
 	/*
 	 * We do not expect kernel mappings or non-PTEs or not-present PTEs.
 	 */
-	VM_WARN_ON_ONCE(!__pte_protnone(oldval) && oldval & _PAGE_PRIVILEGED);
-	VM_WARN_ON_ONCE(!__pte_protnone(newval) && newval & _PAGE_PRIVILEGED);
+	VM_WARN_ON_ONCE(oldval & _PAGE_PRIVILEGED);
+	VM_WARN_ON_ONCE(newval & _PAGE_PRIVILEGED);
 	VM_WARN_ON_ONCE(!(oldval & _PAGE_PTE));
 	VM_WARN_ON_ONCE(!(newval & _PAGE_PTE));
 	VM_WARN_ON_ONCE(!(oldval & _PAGE_PRESENT));
diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h
index 9e5a39b6a311..107fc5a48456 100644
--- a/arch/powerpc/include/asm/ftrace.h
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -20,14 +20,6 @@
 #ifndef __ASSEMBLY__
 extern void _mcount(void);
 
-static inline unsigned long ftrace_call_adjust(unsigned long addr)
-{
-	if (IS_ENABLED(CONFIG_ARCH_USING_PATCHABLE_FUNCTION_ENTRY))
-		addr += MCOUNT_INSN_SIZE;
-
-       return addr;
-}
-
 unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip,
 				    unsigned long sp);
 
@@ -142,8 +134,10 @@ static inline u8 this_cpu_get_ftrace_enabled(void) { return 1; }
 #ifdef CONFIG_FUNCTION_TRACER
 extern unsigned int ftrace_tramp_text[], ftrace_tramp_init[];
 void ftrace_free_init_tramp(void);
+unsigned long ftrace_call_adjust(unsigned long addr);
 #else
 static inline void ftrace_free_init_tramp(void) { }
+static inline unsigned long ftrace_call_adjust(unsigned long addr) { return addr; }
 #endif
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index ddb99e982917..a41e542ba94d 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -349,7 +349,16 @@
 #define H_GET_ENERGY_SCALE_INFO	0x450
 #define H_PKS_SIGNED_UPDATE	0x454
 #define H_WATCHDOG		0x45C
-#define MAX_HCALL_OPCODE	H_WATCHDOG
+#define H_GUEST_GET_CAPABILITIES 0x460
+#define H_GUEST_SET_CAPABILITIES 0x464
+#define H_GUEST_CREATE		0x470
+#define H_GUEST_CREATE_VCPU	0x474
+#define H_GUEST_GET_STATE	0x478
+#define H_GUEST_SET_STATE	0x47C
+#define H_GUEST_RUN_VCPU	0x480
+#define H_GUEST_COPY_MEMORY	0x484
+#define H_GUEST_DELETE		0x488
+#define MAX_HCALL_OPCODE	H_GUEST_DELETE
 
 /* Scope args for H_SCM_UNBIND_ALL */
 #define H_UNBIND_SCOPE_ALL (0x1)
@@ -393,15 +402,6 @@
 #define H_ENTER_NESTED		0xF804
 #define H_TLB_INVALIDATE	0xF808
 #define H_COPY_TOFROM_GUEST	0xF80C
-#define H_GUEST_GET_CAPABILITIES 0x460
-#define H_GUEST_SET_CAPABILITIES 0x464
-#define H_GUEST_CREATE		0x470
-#define H_GUEST_CREATE_VCPU	0x474
-#define H_GUEST_GET_STATE	0x478
-#define H_GUEST_SET_STATE	0x47C
-#define H_GUEST_RUN_VCPU	0x480
-#define H_GUEST_COPY_MEMORY	0x484
-#define H_GUEST_DELETE		0x488
 
 /* Flags for H_SVM_PAGE_IN */
 #define H_PAGE_IN_SHARED        0x1
diff --git a/arch/powerpc/include/asm/hvconsole.h b/arch/powerpc/include/asm/hvconsole.h
index ccb2034506f0..d841a97010a0 100644
--- a/arch/powerpc/include/asm/hvconsole.h
+++ b/arch/powerpc/include/asm/hvconsole.h
@@ -21,8 +21,8 @@
  * Vio firmware always attempts to fetch MAX_VIO_GET_CHARS chars.  The 'count'
  * parm is included to conform to put_chars() function pointer template
  */
-extern int hvc_get_chars(uint32_t vtermno, char *buf, int count);
-extern int hvc_put_chars(uint32_t vtermno, const char *buf, int count);
+extern ssize_t hvc_get_chars(uint32_t vtermno, u8 *buf, size_t count);
+extern ssize_t hvc_put_chars(uint32_t vtermno, const u8 *buf, size_t count);
 
 /* Provided by HVC VIO */
 void hvc_vio_init_early(void);
diff --git a/arch/powerpc/include/asm/hvsi.h b/arch/powerpc/include/asm/hvsi.h
index 464a7519ed64..9058edcb632b 100644
--- a/arch/powerpc/include/asm/hvsi.h
+++ b/arch/powerpc/include/asm/hvsi.h
@@ -64,7 +64,7 @@ struct hvsi_priv {
 	unsigned int	inbuf_len;	/* data in input buffer */
 	unsigned char	inbuf[HVSI_INBUF_SIZE];
 	unsigned int	inbuf_cur;	/* Cursor in input buffer */
-	unsigned int	inbuf_pktlen;	/* packet length from cursor */
+	size_t		inbuf_pktlen;	/* packet length from cursor */
 	atomic_t	seqno;		/* packet sequence number */
 	unsigned int	opened:1;	/* driver opened */
 	unsigned int	established:1;	/* protocol established */
@@ -72,24 +72,26 @@ struct hvsi_priv {
 	unsigned int	mctrl_update:1;	/* modem control updated */
 	unsigned short	mctrl;		/* modem control */
 	struct tty_struct *tty;		/* tty structure */
-	int (*get_chars)(uint32_t termno, char *buf, int count);
-	int (*put_chars)(uint32_t termno, const char *buf, int count);
+	ssize_t (*get_chars)(uint32_t termno, u8 *buf, size_t count);
+	ssize_t (*put_chars)(uint32_t termno, const u8 *buf, size_t count);
 	uint32_t	termno;
 };
 
 /* hvsi lib functions */
 struct hvc_struct;
 extern void hvsilib_init(struct hvsi_priv *pv,
-			 int (*get_chars)(uint32_t termno, char *buf, int count),
-			 int (*put_chars)(uint32_t termno, const char *buf,
-					  int count),
+			 ssize_t (*get_chars)(uint32_t termno, u8 *buf,
+					      size_t count),
+			 ssize_t (*put_chars)(uint32_t termno, const u8 *buf,
+					      size_t count),
 			 int termno, int is_console);
 extern int hvsilib_open(struct hvsi_priv *pv, struct hvc_struct *hp);
 extern void hvsilib_close(struct hvsi_priv *pv, struct hvc_struct *hp);
 extern int hvsilib_read_mctrl(struct hvsi_priv *pv);
 extern int hvsilib_write_mctrl(struct hvsi_priv *pv, int dtr);
 extern void hvsilib_establish(struct hvsi_priv *pv);
-extern int hvsilib_get_chars(struct hvsi_priv *pv, char *buf, int count);
-extern int hvsilib_put_chars(struct hvsi_priv *pv, const char *buf, int count);
+extern ssize_t hvsilib_get_chars(struct hvsi_priv *pv, u8 *buf, size_t count);
+extern ssize_t hvsilib_put_chars(struct hvsi_priv *pv, const u8 *buf,
+				 size_t count);
 
 #endif /* _HVSI_H */
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 5220274a6277..08c550ed49be 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -710,12 +710,6 @@ static inline void name at					\
 #define memcpy_toio memcpy_toio
 
 /*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
  * We don't do relaxed operations yet, at least not with this semantic
  */
 #define readb_relaxed(addr)	readb(addr)
@@ -900,7 +894,6 @@ void __iomem *ioremap_wt(phys_addr_t address, unsigned long size);
 #endif
 
 void __iomem *ioremap_coherent(phys_addr_t address, unsigned long size);
-#define ioremap_uc(addr, size)		ioremap((addr), (size))
 #define ioremap_cache(addr, size) \
 	ioremap_prot((addr), (size), pgprot_val(PAGE_KERNEL))
 
diff --git a/arch/powerpc/include/asm/irq_work.h b/arch/powerpc/include/asm/irq_work.h
index b8b0be8f1a07..c6d3078bd8c3 100644
--- a/arch/powerpc/include/asm/irq_work.h
+++ b/arch/powerpc/include/asm/irq_work.h
@@ -6,6 +6,5 @@ static inline bool arch_irq_work_has_interrupt(void)
 {
 	return true;
 }
-extern void arch_irq_work_raise(void);
 
 #endif /* _ASM_POWERPC_IRQ_WORK_H */
diff --git a/arch/powerpc/include/asm/jump_label.h b/arch/powerpc/include/asm/jump_label.h
index 93ce3ec25387..2f2a86ed2280 100644
--- a/arch/powerpc/include/asm/jump_label.h
+++ b/arch/powerpc/include/asm/jump_label.h
@@ -17,7 +17,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 "nop # arch_static_branch\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".long 1b - ., %l[l_yes] - .\n\t"
@@ -32,7 +32,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 "b %l[l_yes] # arch_static_branch_jump\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".long 1b - ., %l[l_yes] - .\n\t"
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 4f527d09c92b..3e1e2a698c9e 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -302,6 +302,7 @@ void kvmhv_nested_exit(void);
 void kvmhv_vm_nested_init(struct kvm *kvm);
 long kvmhv_set_partition_table(struct kvm_vcpu *vcpu);
 long kvmhv_copy_tofrom_guest_nested(struct kvm_vcpu *vcpu);
+void kvmhv_flush_lpid(u64 lpid);
 void kvmhv_set_ptbl_entry(u64 lpid, u64 dw0, u64 dw1);
 void kvmhv_release_all_nested(struct kvm *kvm);
 long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu);
@@ -593,13 +594,17 @@ static inline u##size kvmppc_get_##reg(struct kvm_vcpu *vcpu)		\
 
 
 KVMPPC_BOOK3S_VCORE_ACCESSOR(vtb, 64, KVMPPC_GSID_VTB)
-KVMPPC_BOOK3S_VCORE_ACCESSOR(tb_offset, 64, KVMPPC_GSID_TB_OFFSET)
 KVMPPC_BOOK3S_VCORE_ACCESSOR_GET(arch_compat, 32, KVMPPC_GSID_LOGICAL_PVR)
 KVMPPC_BOOK3S_VCORE_ACCESSOR_GET(lpcr, 64, KVMPPC_GSID_LPCR)
+KVMPPC_BOOK3S_VCORE_ACCESSOR_SET(tb_offset, 64, KVMPPC_GSID_TB_OFFSET)
+
+static inline u64 kvmppc_get_tb_offset(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.vcore->tb_offset;
+}
 
 static inline u64 kvmppc_get_dec_expires(struct kvm_vcpu *vcpu)
 {
-	WARN_ON(kvmhv_nestedv2_cached_reload(vcpu, KVMPPC_GSID_TB_OFFSET) < 0);
 	WARN_ON(kvmhv_nestedv2_cached_reload(vcpu, KVMPPC_GSID_DEC_EXPIRY_TB) < 0);
 	return vcpu->arch.dec_expires;
 }
@@ -607,7 +612,6 @@ static inline u64 kvmppc_get_dec_expires(struct kvm_vcpu *vcpu)
 static inline void kvmppc_set_dec_expires(struct kvm_vcpu *vcpu, u64 val)
 {
 	vcpu->arch.dec_expires = val;
-	WARN_ON(kvmhv_nestedv2_cached_reload(vcpu, KVMPPC_GSID_TB_OFFSET) < 0);
 	kvmhv_nestedv2_mark_dirty(vcpu, KVMPPC_GSID_DEC_EXPIRY_TB);
 }
 
diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h
index 2477021bff54..d8729ec81ca0 100644
--- a/arch/powerpc/include/asm/kvm_book3s_64.h
+++ b/arch/powerpc/include/asm/kvm_book3s_64.h
@@ -682,6 +682,7 @@ void kvmhv_nestedv2_vcpu_free(struct kvm_vcpu *vcpu, struct kvmhv_nestedv2_io *i
 int kvmhv_nestedv2_flush_vcpu(struct kvm_vcpu *vcpu, u64 time_limit);
 int kvmhv_nestedv2_set_ptbl_entry(unsigned long lpid, u64 dw0, u64 dw1);
 int kvmhv_nestedv2_parse_output(struct kvm_vcpu *vcpu);
+int kvmhv_nestedv2_set_vpa(struct kvm_vcpu *vcpu, unsigned long vpa);
 
 #endif /* CONFIG_KVM_BOOK3S_HV_POSSIBLE */
 
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 8799b37be295..8abac532146e 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -63,8 +63,6 @@
 
 #include <linux/mmu_notifier.h>
 
-#define KVM_ARCH_WANT_MMU_NOTIFIER
-
 #define HPTEG_CACHE_NUM			(1 << 15)
 #define HPTEG_HASH_BITS_PTE		13
 #define HPTEG_HASH_BITS_PTE_LONG	12
diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h
index b88d1d2cf304..b71b9582e754 100644
--- a/arch/powerpc/include/asm/linkage.h
+++ b/arch/powerpc/include/asm/linkage.h
@@ -4,9 +4,6 @@
 
 #include <asm/types.h>
 
-#define __ALIGN		.align 2
-#define __ALIGN_STR	".align 2"
-
 #ifdef CONFIG_PPC64_ELF_ABI_V1
 #define cond_syscall(x) \
 	asm ("\t.weak " #x "\n\t.set " #x ", sys_ni_syscall\n"		\
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 52cc25864a1b..d8b7e246a32f 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -412,5 +412,9 @@ extern void *abatron_pteptrs[2];
 #include <asm/nohash/mmu.h>
 #endif
 
+#if defined(CONFIG_FA_DUMP) || defined(CONFIG_PRESERVE_FA_DUMP)
+#define __HAVE_ARCH_RESERVED_KERNEL_PAGES
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_MMU_H_ */
diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h
index 4c6c6dbd182f..da827d2d0866 100644
--- a/arch/powerpc/include/asm/mmzone.h
+++ b/arch/powerpc/include/asm/mmzone.h
@@ -42,14 +42,6 @@ u64 memory_hotplug_max(void);
 #else
 #define memory_hotplug_max() memblock_end_of_DRAM()
 #endif /* CONFIG_NUMA */
-#ifdef CONFIG_FA_DUMP
-#define __HAVE_ARCH_RESERVED_KERNEL_PAGES
-#endif
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-extern int create_section_mapping(unsigned long start, unsigned long end,
-				  int nid, pgprot_t prot);
-#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_MMZONE_H_ */
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index b66b0c615f4f..af304e6cb486 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -313,9 +313,11 @@ extern int early_init_dt_scan_recoverable_ranges(unsigned long node,
 				 const char *uname, int depth, void *data);
 void __init opal_configure_cores(void);
 
-extern int opal_get_chars(uint32_t vtermno, char *buf, int count);
-extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len);
-extern int opal_put_chars_atomic(uint32_t vtermno, const char *buf, int total_len);
+extern ssize_t opal_get_chars(uint32_t vtermno, u8 *buf, size_t count);
+extern ssize_t opal_put_chars(uint32_t vtermno, const u8 *buf,
+			      size_t total_len);
+extern ssize_t opal_put_chars_atomic(uint32_t vtermno, const u8 *buf,
+				     size_t total_len);
 extern int opal_flush_chars(uint32_t vtermno, bool wait);
 extern int opal_flush_console(uint32_t vtermno);
 
diff --git a/arch/powerpc/include/asm/papr-sysparm.h b/arch/powerpc/include/asm/papr-sysparm.h
index f5fdbd8ae9db..c3cd5b131033 100644
--- a/arch/powerpc/include/asm/papr-sysparm.h
+++ b/arch/powerpc/include/asm/papr-sysparm.h
@@ -2,8 +2,10 @@
 #ifndef _ASM_POWERPC_PAPR_SYSPARM_H
 #define _ASM_POWERPC_PAPR_SYSPARM_H
 
+#include <uapi/asm/papr-sysparm.h>
+
 typedef struct {
-	const u32 token;
+	u32 token;
 } papr_sysparm_t;
 
 #define mk_papr_sysparm(x_) ((papr_sysparm_t){ .token = x_, })
@@ -20,14 +22,17 @@ typedef struct {
 #define PAPR_SYSPARM_TLB_BLOCK_INVALIDATE_ATTRS    mk_papr_sysparm(50)
 #define PAPR_SYSPARM_LPAR_NAME                     mk_papr_sysparm(55)
 
-enum {
-	PAPR_SYSPARM_MAX_INPUT  = 1024,
-	PAPR_SYSPARM_MAX_OUTPUT = 4000,
-};
-
+/**
+ * struct papr_sysparm_buf - RTAS work area layout for system parameter functions.
+ *
+ * This is the memory layout of the buffers passed to/from
+ * ibm,get-system-parameter and ibm,set-system-parameter. It is
+ * distinct from the papr_sysparm_io_block structure that is passed
+ * between user space and the kernel.
+ */
 struct papr_sysparm_buf {
 	__be16 len;
-	char val[PAPR_SYSPARM_MAX_OUTPUT];
+	u8 val[PAPR_SYSPARM_MAX_OUTPUT];
 };
 
 struct papr_sysparm_buf *papr_sysparm_buf_alloc(void);
diff --git a/arch/powerpc/include/asm/paravirt.h b/arch/powerpc/include/asm/paravirt.h
index ac4279208d63..b78b82d66057 100644
--- a/arch/powerpc/include/asm/paravirt.h
+++ b/arch/powerpc/include/asm/paravirt.h
@@ -76,6 +76,17 @@ static inline bool is_vcpu_idle(int vcpu)
 {
 	return lppaca_of(vcpu).idle;
 }
+
+static inline bool vcpu_is_dispatched(int vcpu)
+{
+	/*
+	 * This is the yield_count.  An "odd" value (low bit on) means that
+	 * the processor is yielded (either because of an OS yield or a
+	 * hypervisor preempt).  An even value implies that the processor is
+	 * currently executing.
+	 */
+	return (!(yield_count_of(vcpu) & 1));
+}
 #else
 static inline bool is_shared_processor(void)
 {
@@ -109,6 +120,10 @@ static inline bool is_vcpu_idle(int vcpu)
 {
 	return false;
 }
+static inline bool vcpu_is_dispatched(int vcpu)
+{
+	return true;
+}
 #endif
 
 #define vcpu_is_preempted vcpu_is_preempted
@@ -134,12 +149,12 @@ static inline bool vcpu_is_preempted(int cpu)
 	 * If the hypervisor has dispatched the target CPU on a physical
 	 * processor, then the target CPU is definitely not preempted.
 	 */
-	if (!(yield_count_of(cpu) & 1))
+	if (vcpu_is_dispatched(cpu))
 		return false;
 
 	/*
-	 * If the target CPU has yielded to Hypervisor but OS has not
-	 * requested idle then the target CPU is definitely preempted.
+	 * if the target CPU is not dispatched and the guest OS
+	 * has not marked the CPU idle, then it is hypervisor preempted.
 	 */
 	if (!is_vcpu_idle(cpu))
 		return true;
@@ -166,7 +181,7 @@ static inline bool vcpu_is_preempted(int cpu)
 
 		/*
 		 * The PowerVM hypervisor dispatches VMs on a whole core
-		 * basis. So we know that a thread sibling of the local CPU
+		 * basis. So we know that a thread sibling of the executing CPU
 		 * cannot have been preempted by the hypervisor, even if it
 		 * has called H_CONFER, which will set the yield bit.
 		 */
@@ -174,15 +189,17 @@ static inline bool vcpu_is_preempted(int cpu)
 			return false;
 
 		/*
-		 * If any of the threads of the target CPU's core are not
-		 * preempted or ceded, then consider target CPU to be
-		 * non-preempted.
+		 * The specific target CPU was marked by guest OS as idle, but
+		 * then also check all other cpus in the core for PowerVM
+		 * because it does core scheduling and one of the vcpu
+		 * of the core getting preempted by hypervisor implies
+		 * other vcpus can also be considered preempted.
 		 */
 		first_cpu = cpu_first_thread_sibling(cpu);
 		for (i = first_cpu; i < first_cpu + threads_per_core; i++) {
 			if (i == cpu)
 				continue;
-			if (!(yield_count_of(i) & 1))
+			if (vcpu_is_dispatched(i))
 				return false;
 			if (!is_vcpu_idle(i))
 				return true;
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index d9fcff575027..a8b7e8682f5b 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -30,11 +30,24 @@ void *pci_traverse_device_nodes(struct device_node *start,
 				void *data);
 extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
 
+#if defined(CONFIG_IOMMU_API) && (defined(CONFIG_PPC_PSERIES) || \
+				  defined(CONFIG_PPC_POWERNV))
+extern void ppc_iommu_register_device(struct pci_controller *phb);
+extern void ppc_iommu_unregister_device(struct pci_controller *phb);
+#else
+static inline void ppc_iommu_register_device(struct pci_controller *phb) { }
+static inline void ppc_iommu_unregister_device(struct pci_controller *phb) { }
+#endif
+
+
 /* From rtas_pci.h */
 extern void init_pci_config_tokens (void);
 extern unsigned long get_phb_buid (struct device_node *);
 extern int rtas_setup_phb(struct pci_controller *phb);
 
+int rtas_pci_dn_read_config(struct pci_dn *pdn, int where, int size, u32 *val);
+int rtas_pci_dn_write_config(struct pci_dn *pdn, int where, int size, u32 val);
+
 #ifdef CONFIG_EEH
 
 void eeh_addr_cache_insert_dev(struct pci_dev *dev);
@@ -44,8 +57,6 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity);
 int eeh_pci_enable(struct eeh_pe *pe, int function);
 int eeh_pe_reset_full(struct eeh_pe *pe, bool include_passed);
 void eeh_save_bars(struct eeh_dev *edev);
-int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
-int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
 void eeh_pe_state_mark(struct eeh_pe *pe, int state);
 void eeh_pe_mark_isolated(struct eeh_pe *pe);
 void eeh_pe_state_clear(struct eeh_pe *pe, int state, bool include_passed);
diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h
index a5f36546a052..d13d8fdc3411 100644
--- a/arch/powerpc/include/asm/ps3.h
+++ b/arch/powerpc/include/asm/ps3.h
@@ -514,4 +514,10 @@ u64 ps3_get_spe_id(void *arg);
 
 void ps3_early_mm_init(void);
 
+#ifdef CONFIG_PPC_EARLY_DEBUG_PS3GELIC
+void udbg_shutdown_ps3gelic(void);
+#else
+static inline void udbg_shutdown_ps3gelic(void) {}
+#endif
+
 #endif
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 4ae4ab9090a2..bb47af9054a9 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -617,6 +617,8 @@
 #endif
 #define SPRN_HID2	0x3F8		/* Hardware Implementation Register 2 */
 #define SPRN_HID2_GEKKO	0x398		/* Gekko HID2 Register */
+#define SPRN_HID2_G2_LE	0x3F3		/* G2_LE HID2 Register */
+#define  HID2_G2_LE_HBE	(1<<18)		/* High BAT Enable (G2_LE) */
 #define SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
 #define SPRN_IABR2	0x3FA		/* 83xx */
 #define SPRN_IBCR	0x135		/* 83xx Insn Breakpoint Control Reg */
@@ -1361,6 +1363,7 @@
 #define PVR_POWER8E	0x004B
 #define PVR_POWER8NVL	0x004C
 #define PVR_POWER8	0x004D
+#define PVR_HX_C2000	0x0066
 #define PVR_POWER9	0x004E
 #define PVR_POWER10	0x0080
 #define PVR_BE		0x0070
diff --git a/arch/powerpc/include/asm/reg_a2.h b/arch/powerpc/include/asm/reg_a2.h
deleted file mode 100644
index 74fba29e9491..000000000000
--- a/arch/powerpc/include/asm/reg_a2.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *  Register definitions specific to the A2 core
- *
- *  Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
- */
-
-#ifndef __ASM_POWERPC_REG_A2_H__
-#define __ASM_POWERPC_REG_A2_H__
-
-#include <asm/asm-const.h>
-
-#define SPRN_TENSR	0x1b5
-#define SPRN_TENS	0x1b6	/* Thread ENable Set */
-#define SPRN_TENC	0x1b7	/* Thread ENable Clear */
-
-#define SPRN_A2_CCR0	0x3f0	/* Core Configuration Register 0 */
-#define SPRN_A2_CCR1	0x3f1	/* Core Configuration Register 1 */
-#define SPRN_A2_CCR2	0x3f2	/* Core Configuration Register 2 */
-#define SPRN_MMUCR0	0x3fc	/* MMU Control Register 0 */
-#define SPRN_MMUCR1	0x3fd	/* MMU Control Register 1 */
-#define SPRN_MMUCR2	0x3fe	/* MMU Control Register 2 */
-#define SPRN_MMUCR3	0x3ff	/* MMU Control Register 3 */
-
-#define SPRN_IAR	0x372
-
-#define SPRN_IUCR0	0x3f3
-#define IUCR0_ICBI_ACK	0x1000
-
-#define SPRN_XUCR0	0x3f6	/* Execution Unit Config Register 0 */
-
-#define A2_IERAT_SIZE	16
-#define A2_DERAT_SIZE	32
-
-/* A2 MMUCR0 bits */
-#define MMUCR0_ECL	0x80000000	/* Extended Class for TLB fills */
-#define MMUCR0_TID_NZ	0x40000000	/* TID is non-zero */
-#define MMUCR0_TS	0x10000000	/* Translation space for TLB fills */
-#define MMUCR0_TGS	0x20000000	/* Guest space for TLB fills */
-#define MMUCR0_TLBSEL	0x0c000000	/* TLB or ERAT target for TLB fills */
-#define MMUCR0_TLBSEL_U	0x00000000	/*  TLBSEL = UTLB */
-#define MMUCR0_TLBSEL_I	0x08000000	/*  TLBSEL = I-ERAT */
-#define MMUCR0_TLBSEL_D	0x0c000000	/*  TLBSEL = D-ERAT */
-#define MMUCR0_LOCKSRSH	0x02000000	/* Use TLB lock on tlbsx. */
-#define MMUCR0_TID_MASK	0x000000ff	/* TID field */
-
-/* A2 MMUCR1 bits */
-#define MMUCR1_IRRE		0x80000000	/* I-ERAT round robin enable */
-#define MMUCR1_DRRE		0x40000000	/* D-ERAT round robin enable */
-#define MMUCR1_REE		0x20000000	/* Reference Exception Enable*/
-#define MMUCR1_CEE		0x10000000	/* Change exception enable */
-#define MMUCR1_CSINV_ALL	0x00000000	/* Inval ERAT on all CS evts */
-#define MMUCR1_CSINV_NISYNC	0x04000000	/* Inval ERAT on all ex isync*/
-#define MMUCR1_CSINV_NEVER	0x0c000000	/* Don't inval ERAT on CS */
-#define MMUCR1_ICTID		0x00080000	/* IERAT class field as TID */
-#define MMUCR1_ITTID		0x00040000	/* IERAT thdid field as TID */
-#define MMUCR1_DCTID		0x00020000	/* DERAT class field as TID */
-#define MMUCR1_DTTID		0x00010000	/* DERAT thdid field as TID */
-#define MMUCR1_DCCD		0x00008000	/* DERAT class ignore */
-#define MMUCR1_TLBWE_BINV	0x00004000	/* back invalidate on tlbwe */
-
-/* A2 MMUCR2 bits */
-#define MMUCR2_PSSEL_SHIFT	4
-
-/* A2 MMUCR3 bits */
-#define MMUCR3_THID		0x0000000f	/* Thread ID */
-
-/* *** ERAT TLB bits definitions */
-#define TLB0_EPN_MASK		ASM_CONST(0xfffffffffffff000)
-#define TLB0_CLASS_MASK		ASM_CONST(0x0000000000000c00)
-#define TLB0_CLASS_00		ASM_CONST(0x0000000000000000)
-#define TLB0_CLASS_01		ASM_CONST(0x0000000000000400)
-#define TLB0_CLASS_10		ASM_CONST(0x0000000000000800)
-#define TLB0_CLASS_11		ASM_CONST(0x0000000000000c00)
-#define TLB0_V			ASM_CONST(0x0000000000000200)
-#define TLB0_X			ASM_CONST(0x0000000000000100)
-#define TLB0_SIZE_MASK		ASM_CONST(0x00000000000000f0)
-#define TLB0_SIZE_4K		ASM_CONST(0x0000000000000010)
-#define TLB0_SIZE_64K		ASM_CONST(0x0000000000000030)
-#define TLB0_SIZE_1M		ASM_CONST(0x0000000000000050)
-#define TLB0_SIZE_16M		ASM_CONST(0x0000000000000070)
-#define TLB0_SIZE_1G		ASM_CONST(0x00000000000000a0)
-#define TLB0_THDID_MASK		ASM_CONST(0x000000000000000f)
-#define TLB0_THDID_0		ASM_CONST(0x0000000000000001)
-#define TLB0_THDID_1		ASM_CONST(0x0000000000000002)
-#define TLB0_THDID_2		ASM_CONST(0x0000000000000004)
-#define TLB0_THDID_3		ASM_CONST(0x0000000000000008)
-#define TLB0_THDID_ALL		ASM_CONST(0x000000000000000f)
-
-#define TLB1_RESVATTR		ASM_CONST(0x00f0000000000000)
-#define TLB1_U0			ASM_CONST(0x0008000000000000)
-#define TLB1_U1			ASM_CONST(0x0004000000000000)
-#define TLB1_U2			ASM_CONST(0x0002000000000000)
-#define TLB1_U3			ASM_CONST(0x0001000000000000)
-#define TLB1_R			ASM_CONST(0x0000800000000000)
-#define TLB1_C			ASM_CONST(0x0000400000000000)
-#define TLB1_RPN_MASK		ASM_CONST(0x000003fffffff000)
-#define TLB1_W			ASM_CONST(0x0000000000000800)
-#define TLB1_I			ASM_CONST(0x0000000000000400)
-#define TLB1_M			ASM_CONST(0x0000000000000200)
-#define TLB1_G			ASM_CONST(0x0000000000000100)
-#define TLB1_E			ASM_CONST(0x0000000000000080)
-#define TLB1_VF			ASM_CONST(0x0000000000000040)
-#define TLB1_UX			ASM_CONST(0x0000000000000020)
-#define TLB1_SX			ASM_CONST(0x0000000000000010)
-#define TLB1_UW			ASM_CONST(0x0000000000000008)
-#define TLB1_SW			ASM_CONST(0x0000000000000004)
-#define TLB1_UR			ASM_CONST(0x0000000000000002)
-#define TLB1_SR			ASM_CONST(0x0000000000000001)
-
-/* A2 erativax attributes definitions */
-#define ERATIVAX_RS_IS_ALL		0x000
-#define ERATIVAX_RS_IS_TID		0x040
-#define ERATIVAX_RS_IS_CLASS		0x080
-#define ERATIVAX_RS_IS_FULLMATCH	0x0c0
-#define ERATIVAX_CLASS_00		0x000
-#define ERATIVAX_CLASS_01		0x010
-#define ERATIVAX_CLASS_10		0x020
-#define ERATIVAX_CLASS_11		0x030
-#define ERATIVAX_PSIZE_4K		(TLB_PSIZE_4K >> 1)
-#define ERATIVAX_PSIZE_64K		(TLB_PSIZE_64K >> 1)
-#define ERATIVAX_PSIZE_1M		(TLB_PSIZE_1M >> 1)
-#define ERATIVAX_PSIZE_16M		(TLB_PSIZE_16M >> 1)
-#define ERATIVAX_PSIZE_1G		(TLB_PSIZE_1G >> 1)
-
-/* A2 eratilx attributes definitions */
-#define ERATILX_T_ALL			0
-#define ERATILX_T_TID			1
-#define ERATILX_T_TGS			2
-#define ERATILX_T_FULLMATCH		3
-#define ERATILX_T_CLASS0		4
-#define ERATILX_T_CLASS1		5
-#define ERATILX_T_CLASS2		6
-#define ERATILX_T_CLASS3		7
-
-/* XUCR0 bits */
-#define XUCR0_TRACE_UM_T0		0x40000000	/* Thread 0 */
-#define XUCR0_TRACE_UM_T1		0x20000000	/* Thread 1 */
-#define XUCR0_TRACE_UM_T2		0x10000000	/* Thread 2 */
-#define XUCR0_TRACE_UM_T3		0x08000000	/* Thread 3 */
-
-/* A2 CCR0 register */
-#define A2_CCR0_PME_DISABLED		0x00000000
-#define A2_CCR0_PME_SLEEP		0x40000000
-#define A2_CCR0_PME_RVW			0x80000000
-#define A2_CCR0_PME_DISABLED2		0xc0000000
-
-/* A2 CCR2 register */
-#define A2_CCR2_ERAT_ONLY_MODE		0x00000001
-#define A2_CCR2_ENABLE_ICSWX		0x00000002
-#define A2_CCR2_ENABLE_PC		0x20000000
-#define A2_CCR2_ENABLE_TRACE		0x40000000
-
-#endif /* __ASM_POWERPC_REG_A2_H__ */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index c697c3c74694..065ffd1b2f8a 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -3,6 +3,7 @@
 #define _POWERPC_RTAS_H
 #ifdef __KERNEL__
 
+#include <linux/mutex.h>
 #include <linux/spinlock.h>
 #include <asm/page.h>
 #include <asm/rtas-types.h>
@@ -68,7 +69,7 @@ enum rtas_function_index {
 	RTAS_FNIDX__IBM_READ_SLOT_RESET_STATE,
 	RTAS_FNIDX__IBM_READ_SLOT_RESET_STATE2,
 	RTAS_FNIDX__IBM_REMOVE_PE_DMA_WINDOW,
-	RTAS_FNIDX__IBM_RESET_PE_DMA_WINDOWS,
+	RTAS_FNIDX__IBM_RESET_PE_DMA_WINDOW,
 	RTAS_FNIDX__IBM_SCAN_LOG_DUMP,
 	RTAS_FNIDX__IBM_SET_DYNAMIC_INDICATOR,
 	RTAS_FNIDX__IBM_SET_EEH_OPTION,
@@ -163,7 +164,7 @@ typedef struct {
 #define RTAS_FN_IBM_READ_SLOT_RESET_STATE         rtas_fn_handle(RTAS_FNIDX__IBM_READ_SLOT_RESET_STATE)
 #define RTAS_FN_IBM_READ_SLOT_RESET_STATE2        rtas_fn_handle(RTAS_FNIDX__IBM_READ_SLOT_RESET_STATE2)
 #define RTAS_FN_IBM_REMOVE_PE_DMA_WINDOW          rtas_fn_handle(RTAS_FNIDX__IBM_REMOVE_PE_DMA_WINDOW)
-#define RTAS_FN_IBM_RESET_PE_DMA_WINDOWS          rtas_fn_handle(RTAS_FNIDX__IBM_RESET_PE_DMA_WINDOWS)
+#define RTAS_FN_IBM_RESET_PE_DMA_WINDOW           rtas_fn_handle(RTAS_FNIDX__IBM_RESET_PE_DMA_WINDOW)
 #define RTAS_FN_IBM_SCAN_LOG_DUMP                 rtas_fn_handle(RTAS_FNIDX__IBM_SCAN_LOG_DUMP)
 #define RTAS_FN_IBM_SET_DYNAMIC_INDICATOR         rtas_fn_handle(RTAS_FNIDX__IBM_SET_DYNAMIC_INDICATOR)
 #define RTAS_FN_IBM_SET_EEH_OPTION                rtas_fn_handle(RTAS_FNIDX__IBM_SET_EEH_OPTION)
@@ -201,12 +202,25 @@ typedef struct {
 /* Memory set aside for sys_rtas to use with calls that need a work area. */
 #define RTAS_USER_REGION_SIZE (64 * 1024)
 
-/* RTAS return status codes */
-#define RTAS_HARDWARE_ERROR	-1    /* Hardware Error */
-#define RTAS_BUSY		-2    /* RTAS Busy */
-#define RTAS_INVALID_PARAMETER	-3    /* Invalid indicator/domain/sensor etc. */
-#define RTAS_EXTENDED_DELAY_MIN	9900
-#define RTAS_EXTENDED_DELAY_MAX	9905
+/*
+ * Common RTAS function return values, derived from the table "RTAS
+ * Status Word Values" in PAPR+ v2.13 7.2.8: "Return Codes". If a
+ * function can return a value in this table then generally it has the
+ * meaning listed here. More extended commentary in the documentation
+ * for rtas_call().
+ *
+ * RTAS functions may use negative and positive numbers not in this
+ * set for function-specific error and success conditions,
+ * respectively.
+ */
+#define RTAS_SUCCESS                     0 /* Success. */
+#define RTAS_HARDWARE_ERROR             -1 /* Hardware or other unspecified error. */
+#define RTAS_BUSY                       -2 /* Retry immediately. */
+#define RTAS_INVALID_PARAMETER          -3 /* Invalid indicator/domain/sensor etc. */
+#define RTAS_UNEXPECTED_STATE_CHANGE    -7 /* Seems limited to EEH and slot reset. */
+#define RTAS_EXTENDED_DELAY_MIN       9900 /* Retry after delaying for ~1ms. */
+#define RTAS_EXTENDED_DELAY_MAX       9905 /* Retry after delaying for ~100s. */
+#define RTAS_ML_ISOLATION_ERROR      -9000 /* Multi-level isolation error. */
 
 /* statuses specific to ibm,suspend-me */
 #define RTAS_SUSPEND_ABORTED     9000 /* Suspension aborted */
@@ -268,7 +282,7 @@ typedef struct {
 #define RTAS_TYPE_DEALLOC		0xE3
 #define RTAS_TYPE_DUMP			0xE4
 #define RTAS_TYPE_HOTPLUG		0xE5
-/* I don't add PowerMGM events right now, this is a different topic */ 
+/* I don't add PowerMGM events right now, this is a different topic */
 #define RTAS_TYPE_PMGM_POWER_SW_ON	0x60
 #define RTAS_TYPE_PMGM_POWER_SW_OFF	0x61
 #define RTAS_TYPE_PMGM_LID_OPEN		0x62
@@ -408,44 +422,41 @@ static inline bool rtas_function_implemented(const rtas_fn_handle_t handle)
 {
 	return rtas_function_token(handle) != RTAS_UNKNOWN_SERVICE;
 }
-extern int rtas_token(const char *service);
-extern int rtas_service_present(const char *service);
-extern int rtas_call(int token, int, int, int *, ...);
+int rtas_token(const char *service);
+int rtas_call(int token, int nargs, int nret, int *outputs, ...);
 void rtas_call_unlocked(struct rtas_args *args, int token, int nargs,
 			int nret, ...);
-extern void __noreturn rtas_restart(char *cmd);
-extern void rtas_power_off(void);
-extern void __noreturn rtas_halt(void);
-extern void rtas_os_term(char *str);
+void __noreturn rtas_restart(char *cmd);
+void rtas_power_off(void);
+void __noreturn rtas_halt(void);
+void rtas_os_term(char *str);
 void rtas_activate_firmware(void);
-extern int rtas_get_sensor(int sensor, int index, int *state);
-extern int rtas_get_sensor_fast(int sensor, int index, int *state);
-extern int rtas_get_power_level(int powerdomain, int *level);
-extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
-extern bool rtas_indicator_present(int token, int *maxindex);
-extern int rtas_set_indicator(int indicator, int index, int new_value);
-extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
-extern void rtas_progress(char *s, unsigned short hex);
+int rtas_get_sensor(int sensor, int index, int *state);
+int rtas_get_sensor_fast(int sensor, int index, int *state);
+int rtas_get_power_level(int powerdomain, int *level);
+int rtas_set_power_level(int powerdomain, int level, int *setlevel);
+bool rtas_indicator_present(int token, int *maxindex);
+int rtas_set_indicator(int indicator, int index, int new_value);
+int rtas_set_indicator_fast(int indicator, int index, int new_value);
+void rtas_progress(char *s, unsigned short hex);
 int rtas_ibm_suspend_me(int *fw_status);
 int rtas_error_rc(int rtas_rc);
 
 struct rtc_time;
-extern time64_t rtas_get_boot_time(void);
-extern void rtas_get_rtc_time(struct rtc_time *rtc_time);
-extern int rtas_set_rtc_time(struct rtc_time *rtc_time);
+time64_t rtas_get_boot_time(void);
+void rtas_get_rtc_time(struct rtc_time *rtc_time);
+int rtas_set_rtc_time(struct rtc_time *rtc_time);
 
-extern unsigned int rtas_busy_delay_time(int status);
+unsigned int rtas_busy_delay_time(int status);
 bool rtas_busy_delay(int status);
 
-extern int early_init_dt_scan_rtas(unsigned long node,
-		const char *uname, int depth, void *data);
+int early_init_dt_scan_rtas(unsigned long node, const char *uname, int depth, void *data);
 
-extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
+void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
 
 #ifdef CONFIG_PPC_PSERIES
 extern time64_t last_rtas_event;
-extern int clobbering_unread_rtas_event(void);
-extern void post_mobility_fixup(void);
+int clobbering_unread_rtas_event(void);
 int rtas_syscall_dispatch_ibm_suspend_me(u64 handle);
 #else
 static inline int clobbering_unread_rtas_event(void) { return 0; }
@@ -456,14 +467,14 @@ static inline int rtas_syscall_dispatch_ibm_suspend_me(u64 handle)
 #endif
 
 #ifdef CONFIG_PPC_RTAS_DAEMON
-extern void rtas_cancel_event_scan(void);
+void rtas_cancel_event_scan(void);
 #else
 static inline void rtas_cancel_event_scan(void) { }
 #endif
 
 /* Error types logged.  */
 #define ERR_FLAG_ALREADY_LOGGED	0x0
-#define ERR_FLAG_BOOT		0x1 	/* log was pulled from NVRAM on boot */
+#define ERR_FLAG_BOOT		0x1	/* log was pulled from NVRAM on boot */
 #define ERR_TYPE_RTAS_LOG	0x2	/* from rtas event-scan */
 #define ERR_TYPE_KERNEL_PANIC	0x4	/* from die()/panic() */
 #define ERR_TYPE_KERNEL_PANIC_GZ 0x8	/* ditto, compressed */
@@ -473,7 +484,7 @@ static inline void rtas_cancel_event_scan(void) { }
 	(ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC | ERR_TYPE_KERNEL_PANIC_GZ)
 
 #define RTAS_DEBUG KERN_DEBUG "RTAS: "
- 
+
 #define RTAS_ERROR_LOG_MAX 2048
 
 /*
@@ -481,7 +492,7 @@ static inline void rtas_cancel_event_scan(void) { }
  *  for all rtas calls that require an error buffer argument.
  *  This includes 'check-exception' and 'rtas-last-error'.
  */
-extern int rtas_get_error_log_max(void);
+int rtas_get_error_log_max(void);
 
 /* Event Scan Parameters */
 #define EVENT_SCAN_ALL_EVENTS	0xf0000000
@@ -502,6 +513,8 @@ extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];
 /* RMO buffer reserved for user-space RTAS use */
 extern unsigned long rtas_rmo_buf;
 
+extern struct mutex rtas_ibm_get_vpd_lock;
+
 #define GLOBAL_INTERRUPT_QUEUE 9005
 
 /**
@@ -520,8 +533,8 @@ static inline u32 rtas_config_addr(int busno, int devfn, int reg)
 			(devfn << 8) | (reg & 0xff);
 }
 
-extern void rtas_give_timebase(void);
-extern void rtas_take_timebase(void);
+void rtas_give_timebase(void);
+void rtas_take_timebase(void);
 
 #ifdef CONFIG_PPC_RTAS
 static inline int page_is_rtas_user_buf(unsigned long pfn)
@@ -534,7 +547,7 @@ static inline int page_is_rtas_user_buf(unsigned long pfn)
 
 /* Not the best place to put pSeries_coalesce_init, will be fixed when we
  * move some of the rtas suspend-me stuff to pseries */
-extern void pSeries_coalesce_init(void);
+void pSeries_coalesce_init(void);
 void rtas_initialize(void);
 #else
 static inline int page_is_rtas_user_buf(unsigned long pfn) { return 0;}
@@ -542,8 +555,6 @@ static inline void pSeries_coalesce_init(void) { }
 static inline void rtas_initialize(void) { }
 #endif
 
-extern int call_rtas(const char *, int, int, unsigned long *, ...);
-
 #ifdef CONFIG_HV_PERF_CTRS
 void read_24x7_sys_info(void);
 #else
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
index ea26665f82cf..f43f3a6b0051 100644
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -14,6 +14,7 @@ typedef struct func_desc func_desc_t;
 
 extern char __head_end[];
 extern char __srwx_boundary[];
+extern char __exittext_begin[], __exittext_end[];
 
 /* Patch sites */
 extern s32 patch__call_flush_branch_caches1;
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index bf5dde1a4114..15c5691dd218 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -14,7 +14,7 @@
 
 #ifdef __KERNEL__
 
-#ifdef CONFIG_KASAN
+#if defined(CONFIG_KASAN) && CONFIG_THREAD_SHIFT < 15
 #define MIN_THREAD_SHIFT	(CONFIG_THREAD_SHIFT + 1)
 #else
 #define MIN_THREAD_SHIFT	CONFIG_THREAD_SHIFT
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index f1f9890f50d3..de10437fd206 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -74,7 +74,7 @@ __pu_failed:							\
 /* -mprefixed can generate offsets beyond range, fall back hack */
 #ifdef CONFIG_PPC_KERNEL_PREFIXED
 #define __put_user_asm_goto(x, addr, label, op)			\
-	asm_volatile_goto(					\
+	asm goto(					\
 		"1:	" op " %0,0(%1)	# put_user\n"		\
 		EX_TABLE(1b, %l2)				\
 		:						\
@@ -83,7 +83,7 @@ __pu_failed:							\
 		: label)
 #else
 #define __put_user_asm_goto(x, addr, label, op)			\
-	asm_volatile_goto(					\
+	asm goto(					\
 		"1:	" op "%U1%X1 %0,%1	# put_user\n"	\
 		EX_TABLE(1b, %l2)				\
 		:						\
@@ -97,7 +97,7 @@ __pu_failed:							\
 	__put_user_asm_goto(x, ptr, label, "std")
 #else /* __powerpc64__ */
 #define __put_user_asm2_goto(x, addr, label)			\
-	asm_volatile_goto(					\
+	asm goto(					\
 		"1:	stw%X1 %0, %1\n"			\
 		"2:	stw%X1 %L0, %L1\n"			\
 		EX_TABLE(1b, %l2)				\
@@ -146,7 +146,7 @@ do {								\
 /* -mprefixed can generate offsets beyond range, fall back hack */
 #ifdef CONFIG_PPC_KERNEL_PREFIXED
 #define __get_user_asm_goto(x, addr, label, op)			\
-	asm_volatile_goto(					\
+	asm_goto_output(					\
 		"1:	"op" %0,0(%1)	# get_user\n"		\
 		EX_TABLE(1b, %l2)				\
 		: "=r" (x)					\
@@ -155,7 +155,7 @@ do {								\
 		: label)
 #else
 #define __get_user_asm_goto(x, addr, label, op)			\
-	asm_volatile_goto(					\
+	asm_goto_output(					\
 		"1:	"op"%U1%X1 %0, %1	# get_user\n"	\
 		EX_TABLE(1b, %l2)				\
 		: "=r" (x)					\
@@ -169,7 +169,7 @@ do {								\
 	__get_user_asm_goto(x, addr, label, "ld")
 #else /* __powerpc64__ */
 #define __get_user_asm2_goto(x, addr, label)			\
-	asm_volatile_goto(					\
+	asm_goto_output(					\
 		"1:	lwz%X1 %0, %1\n"			\
 		"2:	lwz%X1 %L0, %L1\n"			\
 		EX_TABLE(1b, %l2)				\
diff --git a/arch/powerpc/include/uapi/asm/papr-miscdev.h b/arch/powerpc/include/uapi/asm/papr-miscdev.h
new file mode 100644
index 000000000000..49a2a270b7f3
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/papr-miscdev.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_PAPR_MISCDEV_H_
+#define _UAPI_PAPR_MISCDEV_H_
+
+enum {
+	PAPR_MISCDEV_IOC_ID = 0xb2,
+};
+
+#endif /* _UAPI_PAPR_MISCDEV_H_ */
diff --git a/arch/powerpc/include/uapi/asm/papr-sysparm.h b/arch/powerpc/include/uapi/asm/papr-sysparm.h
new file mode 100644
index 000000000000..f733467b1534
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/papr-sysparm.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_PAPR_SYSPARM_H_
+#define _UAPI_PAPR_SYSPARM_H_
+
+#include <linux/types.h>
+#include <asm/ioctl.h>
+#include <asm/papr-miscdev.h>
+
+enum {
+	PAPR_SYSPARM_MAX_INPUT  = 1024,
+	PAPR_SYSPARM_MAX_OUTPUT = 4000,
+};
+
+struct papr_sysparm_io_block {
+	__u32 parameter;
+	__u16 length;
+	__u8 data[PAPR_SYSPARM_MAX_OUTPUT];
+};
+
+/**
+ * PAPR_SYSPARM_IOC_GET - Retrieve the value of a PAPR system parameter.
+ *
+ * Uses _IOWR because of one corner case: Retrieving the value of the
+ * "OS Service Entitlement Status" parameter (60) requires the caller
+ * to supply input data (a date string) in the buffer passed to
+ * firmware. So the @length and @data of the incoming
+ * papr_sysparm_io_block are always used to initialize the work area
+ * supplied to ibm,get-system-parameter. No other parameters are known
+ * to parameterize the result this way, and callers are encouraged
+ * (but not required) to zero-initialize @length and @data in the
+ * common case.
+ *
+ * On error the contents of the ioblock are indeterminate.
+ *
+ * Return:
+ * 0: Success; @length is the length of valid data in @data, not to exceed @PAPR_SYSPARM_MAX_OUTPUT.
+ * -EIO: Platform error. (-1)
+ * -EINVAL: Incorrect data length or format. (-9999)
+ * -EPERM: The calling partition is not allowed to access this parameter. (-9002)
+ * -EOPNOTSUPP: Parameter not supported on this platform (-3)
+ */
+#define PAPR_SYSPARM_IOC_GET _IOWR(PAPR_MISCDEV_IOC_ID, 1, struct papr_sysparm_io_block)
+
+/**
+ * PAPR_SYSPARM_IOC_SET - Update the value of a PAPR system parameter.
+ *
+ * The contents of the ioblock are unchanged regardless of success.
+ *
+ * Return:
+ * 0: Success; the parameter has been updated.
+ * -EIO: Platform error. (-1)
+ * -EINVAL: Incorrect data length or format. (-9999)
+ * -EPERM: The calling partition is not allowed to access this parameter. (-9002)
+ * -EOPNOTSUPP: Parameter not supported on this platform (-3)
+ */
+#define PAPR_SYSPARM_IOC_SET _IOW(PAPR_MISCDEV_IOC_ID, 2, struct papr_sysparm_io_block)
+
+#endif /* _UAPI_PAPR_SYSPARM_H_ */
diff --git a/arch/powerpc/include/uapi/asm/papr-vpd.h b/arch/powerpc/include/uapi/asm/papr-vpd.h
new file mode 100644
index 000000000000..1c88e87cb420
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/papr-vpd.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_PAPR_VPD_H_
+#define _UAPI_PAPR_VPD_H_
+
+#include <asm/ioctl.h>
+#include <asm/papr-miscdev.h>
+
+struct papr_location_code {
+	/*
+	 * PAPR+ v2.13 12.3.2.4 Converged Location Code Rules - Length
+	 * Restrictions. 79 characters plus nul.
+	 */
+	char str[80];
+};
+
+/*
+ * ioctl for /dev/papr-vpd. Returns a VPD handle fd corresponding to
+ * the location code.
+ */
+#define PAPR_VPD_IOC_CREATE_HANDLE _IOW(PAPR_MISCDEV_IOC_ID, 0, struct papr_location_code)
+
+#endif /* _UAPI_PAPR_VPD_H_ */
diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
index f29ce3dd6140..bfd3f442e5eb 100644
--- a/arch/powerpc/kernel/cpu_setup_6xx.S
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -26,6 +26,15 @@ BEGIN_FTR_SECTION
 	bl	__init_fpu_registers
 END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE)
 	bl	setup_common_caches
+
+	/*
+	 * This assumes that all cores using __setup_cpu_603 with
+	 * MMU_FTR_USE_HIGH_BATS are G2_LE compatible
+	 */
+BEGIN_MMU_FTR_SECTION
+	bl      setup_g2_le_hid2
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
+
 	mtlr	r5
 	blr
 _GLOBAL(__setup_cpu_604)
@@ -115,6 +124,16 @@ SYM_FUNC_START_LOCAL(setup_604_hid0)
 	blr
 SYM_FUNC_END(setup_604_hid0)
 
+/* Enable high BATs for G2_LE and derivatives like e300cX */
+SYM_FUNC_START_LOCAL(setup_g2_le_hid2)
+	mfspr	r11,SPRN_HID2_G2_LE
+	oris	r11,r11,HID2_G2_LE_HBE@h
+	mtspr	SPRN_HID2_G2_LE,r11
+	sync
+	isync
+	blr
+SYM_FUNC_END(setup_g2_le_hid2)
+
 /* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
  * erratas we work around here.
  * Moto MPC710CE.pdf describes them, those are errata
@@ -495,4 +514,3 @@ _GLOBAL(__restore_cpu_setup)
 	mtcr	r7
 	blr
 _ASM_NOKPROBE_SYMBOL(__restore_cpu_setup)
-
diff --git a/arch/powerpc/kernel/cpu_specs_book3s_64.h b/arch/powerpc/kernel/cpu_specs_book3s_64.h
index c370c1b804a9..3ff9757df4c0 100644
--- a/arch/powerpc/kernel/cpu_specs_book3s_64.h
+++ b/arch/powerpc/kernel/cpu_specs_book3s_64.h
@@ -238,6 +238,21 @@ static struct cpu_spec cpu_specs[] __initdata = {
 		.machine_check_early	= __machine_check_early_realmode_p8,
 		.platform		= "power8",
 	},
+	{	/* 2.07-compliant processor, HeXin C2000 processor */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00660000,
+		.cpu_name		= "HX-C2000",
+		.cpu_features		= CPU_FTRS_POWER8,
+		.cpu_user_features	= COMMON_USER_POWER8,
+		.cpu_user_features2	= COMMON_USER2_POWER8,
+		.mmu_features		= MMU_FTRS_POWER8,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.cpu_setup		= __setup_cpu_power8,
+		.cpu_restore		= __restore_cpu_power8,
+		.machine_check_early	= __machine_check_early_realmode_p8,
+		.platform		= "power8",
+	},
 	{	/* 3.00-compliant processor, i.e. Power9 "architected" mode */
 		.pvr_mask		= 0xffffffff,
 		.pvr_value		= 0x0f000005,
diff --git a/arch/powerpc/kernel/cpu_specs_e500mc.h b/arch/powerpc/kernel/cpu_specs_e500mc.h
index ceb06b109f83..2ae8e9a7b461 100644
--- a/arch/powerpc/kernel/cpu_specs_e500mc.h
+++ b/arch/powerpc/kernel/cpu_specs_e500mc.h
@@ -8,7 +8,8 @@
 
 #ifdef CONFIG_PPC64
 #define COMMON_USER_BOOKE	(PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
-				 PPC_FEATURE_HAS_FPU | PPC_FEATURE_64)
+				 PPC_FEATURE_HAS_FPU | PPC_FEATURE_64 | \
+				 PPC_FEATURE_BOOKE)
 #else
 #define COMMON_USER_BOOKE	(PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
 				 PPC_FEATURE_BOOKE)
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index e97a0fd0ae90..6f6801da9dc1 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -20,9 +20,9 @@
 #include <asm/setup.h>
 #include <asm/cpu_setup.h>
 
-static struct cpu_spec the_cpu_spec __read_mostly;
+static struct cpu_spec the_cpu_spec __ro_after_init;
 
-struct cpu_spec* cur_cpu_spec __read_mostly = NULL;
+struct cpu_spec *cur_cpu_spec __ro_after_init = NULL;
 EXPORT_SYMBOL(cur_cpu_spec);
 
 /* The platform string corresponding to the real PVR */
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 7ab4c8c0f1ab..dcf0591ad3c2 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -14,7 +14,6 @@
 #include <asm/cputable.h>
 #include <asm/setup.h>
 #include <asm/thread_info.h>
-#include <asm/reg_a2.h>
 #include <asm/exception-64e.h>
 #include <asm/bug.h>
 #include <asm/irqflags.h>
diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c
index 20328f72f9f2..8987eee33dc8 100644
--- a/arch/powerpc/kernel/firmware.c
+++ b/arch/powerpc/kernel/firmware.c
@@ -23,6 +23,8 @@ EXPORT_SYMBOL_GPL(powerpc_firmware_features);
 
 #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_GUEST)
 DEFINE_STATIC_KEY_FALSE(kvm_guest);
+EXPORT_SYMBOL_GPL(kvm_guest);
+
 int __init check_kvm_guest(void)
 {
 	struct device_node *hyper_node;
diff --git a/arch/powerpc/kernel/interrupt.c b/arch/powerpc/kernel/interrupt.c
index c4f6d3c69ba9..eca293794a1e 100644
--- a/arch/powerpc/kernel/interrupt.c
+++ b/arch/powerpc/kernel/interrupt.c
@@ -3,6 +3,7 @@
 #include <linux/context_tracking.h>
 #include <linux/err.h>
 #include <linux/compat.h>
+#include <linux/rseq.h>
 #include <linux/sched/debug.h> /* for show_regs */
 
 #include <asm/kup.h>
diff --git a/arch/powerpc/kernel/interrupt_64.S b/arch/powerpc/kernel/interrupt_64.S
index bd863702d812..1ad059a9e2fe 100644
--- a/arch/powerpc/kernel/interrupt_64.S
+++ b/arch/powerpc/kernel/interrupt_64.S
@@ -52,7 +52,8 @@ _ASM_NOKPROBE_SYMBOL(system_call_vectored_\name)
 	mr	r10,r1
 	ld	r1,PACAKSAVE(r13)
 	std	r10,0(r1)
-	std	r11,_NIP(r1)
+	std	r11,_LINK(r1)
+	std	r11,_NIP(r1)	/* Saved LR is also the next instruction */
 	std	r12,_MSR(r1)
 	std	r0,GPR0(r1)
 	std	r10,GPR1(r1)
@@ -70,7 +71,6 @@ _ASM_NOKPROBE_SYMBOL(system_call_vectored_\name)
 	std	r9,GPR13(r1)
 	SAVE_NVGPRS(r1)
 	std	r11,_XER(r1)
-	std	r11,_LINK(r1)
 	std	r11,_CTR(r1)
 
 	li	r11,\trapnr
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index ebe259bdd462..1185efebf032 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -1287,20 +1287,22 @@ spapr_tce_platform_iommu_attach_dev(struct iommu_domain *platform_domain,
 	struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
 	struct iommu_group *grp = iommu_group_get(dev);
 	struct iommu_table_group *table_group;
-	int ret = -EINVAL;
 
 	/* At first attach the ownership is already set */
-	if (!domain)
+	if (!domain) {
+		iommu_group_put(grp);
 		return 0;
-
-	if (!grp)
-		return -ENODEV;
+	}
 
 	table_group = iommu_group_get_iommudata(grp);
-	ret = table_group->ops->take_ownership(table_group);
+	/*
+	 * The domain being set to PLATFORM from earlier
+	 * BLOCKED. The table_group ownership has to be released.
+	 */
+	table_group->ops->release_ownership(table_group);
 	iommu_group_put(grp);
 
-	return ret;
+	return 0;
 }
 
 static const struct iommu_domain_ops spapr_tce_platform_domain_ops = {
@@ -1312,13 +1314,32 @@ static struct iommu_domain spapr_tce_platform_domain = {
 	.ops = &spapr_tce_platform_domain_ops,
 };
 
-static struct iommu_domain spapr_tce_blocked_domain = {
-	.type = IOMMU_DOMAIN_BLOCKED,
+static int
+spapr_tce_blocked_iommu_attach_dev(struct iommu_domain *platform_domain,
+				     struct device *dev)
+{
+	struct iommu_group *grp = iommu_group_get(dev);
+	struct iommu_table_group *table_group;
+	int ret = -EINVAL;
+
 	/*
 	 * FIXME: SPAPR mixes blocked and platform behaviors, the blocked domain
 	 * also sets the dma_api ops
 	 */
-	.ops = &spapr_tce_platform_domain_ops,
+	table_group = iommu_group_get_iommudata(grp);
+	ret = table_group->ops->take_ownership(table_group);
+	iommu_group_put(grp);
+
+	return ret;
+}
+
+static const struct iommu_domain_ops spapr_tce_blocked_domain_ops = {
+	.attach_dev = spapr_tce_blocked_iommu_attach_dev,
+};
+
+static struct iommu_domain spapr_tce_blocked_domain = {
+	.type = IOMMU_DOMAIN_BLOCKED,
+	.ops = &spapr_tce_blocked_domain_ops,
 };
 
 static bool spapr_tce_iommu_capable(struct device *dev, enum iommu_cap cap)
@@ -1339,7 +1360,7 @@ static struct iommu_device *spapr_tce_iommu_probe_device(struct device *dev)
 	struct pci_controller *hose;
 
 	if (!dev_is_pci(dev))
-		return ERR_PTR(-EPERM);
+		return ERR_PTR(-ENODEV);
 
 	pdev = to_pci_dev(dev);
 	hose = pdev->bus->sysdata;
@@ -1388,6 +1409,21 @@ static const struct attribute_group *spapr_tce_iommu_groups[] = {
 	NULL,
 };
 
+void ppc_iommu_register_device(struct pci_controller *phb)
+{
+	iommu_device_sysfs_add(&phb->iommu, phb->parent,
+				spapr_tce_iommu_groups, "iommu-phb%04x",
+				phb->global_number);
+	iommu_device_register(&phb->iommu, &spapr_tce_iommu_ops,
+				phb->parent);
+}
+
+void ppc_iommu_unregister_device(struct pci_controller *phb)
+{
+	iommu_device_unregister(&phb->iommu);
+	iommu_device_sysfs_remove(&phb->iommu);
+}
+
 /*
  * This registers IOMMU devices of PHBs. This needs to happen
  * after core_initcall(iommu_init) + postcore_initcall(pci_driver_init) and
@@ -1398,11 +1434,7 @@ static int __init spapr_tce_setup_phb_iommus_initcall(void)
 	struct pci_controller *hose;
 
 	list_for_each_entry(hose, &hose_list, list_node) {
-		iommu_device_sysfs_add(&hose->iommu, hose->parent,
-				       spapr_tce_iommu_groups, "iommu-phb%04x",
-				       hose->global_number);
-		iommu_device_register(&hose->iommu, &spapr_tce_iommu_ops,
-				      hose->parent);
+		ppc_iommu_register_device(hose);
 	}
 	return 0;
 }
diff --git a/arch/powerpc/kernel/irq_64.c b/arch/powerpc/kernel/irq_64.c
index 938e66829eae..d5c48d1b0a31 100644
--- a/arch/powerpc/kernel/irq_64.c
+++ b/arch/powerpc/kernel/irq_64.c
@@ -230,7 +230,7 @@ again:
 	 * This allows interrupts to be unmasked without hard disabling, and
 	 * also without new hard interrupts coming in ahead of pending ones.
 	 */
-	asm_volatile_goto(
+	asm goto(
 "1:					\n"
 "		lbz	9,%0(13)	\n"
 "		cmpwi	9,0		\n"
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index eddc031c4b95..8064d9c3de86 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/lockdep.h>
 #include <linux/memblock.h>
+#include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <linux/reboot.h>
@@ -70,14 +71,33 @@ struct rtas_filter {
  *                            ppc64le, and we want to keep it that way. It does
  *                            not make sense for this to be set when @filter
  *                            is NULL.
+ * @lock: Pointer to an optional dedicated per-function mutex. This
+ *        should be set for functions that require multiple calls in
+ *        sequence to complete a single operation, and such sequences
+ *        will disrupt each other if allowed to interleave. Users of
+ *        this function are required to hold the associated lock for
+ *        the duration of the call sequence. Add an explanatory
+ *        comment to the function table entry if setting this member.
  */
 struct rtas_function {
 	s32 token;
 	const bool banned_for_syscall_on_le:1;
 	const char * const name;
 	const struct rtas_filter *filter;
+	struct mutex *lock;
 };
 
+/*
+ * Per-function locks for sequence-based RTAS functions.
+ */
+static DEFINE_MUTEX(rtas_ibm_activate_firmware_lock);
+static DEFINE_MUTEX(rtas_ibm_get_dynamic_sensor_state_lock);
+static DEFINE_MUTEX(rtas_ibm_get_indices_lock);
+static DEFINE_MUTEX(rtas_ibm_lpar_perftools_lock);
+static DEFINE_MUTEX(rtas_ibm_physical_attestation_lock);
+static DEFINE_MUTEX(rtas_ibm_set_dynamic_indicator_lock);
+DEFINE_MUTEX(rtas_ibm_get_vpd_lock);
+
 static struct rtas_function rtas_function_table[] __ro_after_init = {
 	[RTAS_FNIDX__CHECK_EXCEPTION] = {
 		.name = "check-exception",
@@ -125,6 +145,13 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = -1, .size_idx1 = -1,
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
+		/*
+		 * PAPR+ as of v2.13 doesn't explicitly impose any
+		 * restriction, but this typically requires multiple
+		 * calls before success, and there's no reason to
+		 * allow sequences to interleave.
+		 */
+		.lock = &rtas_ibm_activate_firmware_lock,
 	},
 	[RTAS_FNIDX__IBM_CBE_START_PTCAL] = {
 		.name = "ibm,cbe-start-ptcal",
@@ -196,6 +223,13 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = 1, .size_idx1 = -1,
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
+		/*
+		 * PAPR+ v2.13 R1–7.3.19–3 is explicit that the OS
+		 * must not call ibm,get-dynamic-sensor-state with
+		 * different inputs until a non-retry status has been
+		 * returned.
+		 */
+		.lock = &rtas_ibm_get_dynamic_sensor_state_lock,
 	},
 	[RTAS_FNIDX__IBM_GET_INDICES] = {
 		.name = "ibm,get-indices",
@@ -203,6 +237,12 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = 2, .size_idx1 = 3,
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
+		/*
+		 * PAPR+ v2.13 R1–7.3.17–2 says that the OS must not
+		 * interleave ibm,get-indices call sequences with
+		 * different inputs.
+		 */
+		.lock = &rtas_ibm_get_indices_lock,
 	},
 	[RTAS_FNIDX__IBM_GET_RIO_TOPOLOGY] = {
 		.name = "ibm,get-rio-topology",
@@ -220,6 +260,11 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = 0, .size_idx1 = -1,
 			.buf_idx2 = 1, .size_idx2 = 2,
 		},
+		/*
+		 * PAPR+ v2.13 R1–7.3.20–4 indicates that sequences
+		 * should not be allowed to interleave.
+		 */
+		.lock = &rtas_ibm_get_vpd_lock,
 	},
 	[RTAS_FNIDX__IBM_GET_XIVE] = {
 		.name = "ibm,get-xive",
@@ -239,6 +284,11 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = 2, .size_idx1 = 3,
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
+		/*
+		 * PAPR+ v2.13 R1–7.3.26–6 says the OS should allow
+		 * only one call sequence in progress at a time.
+		 */
+		.lock = &rtas_ibm_lpar_perftools_lock,
 	},
 	[RTAS_FNIDX__IBM_MANAGE_FLASH_IMAGE] = {
 		.name = "ibm,manage-flash-image",
@@ -277,6 +327,14 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = 0, .size_idx1 = 1,
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
+		/*
+		 * This follows a sequence-based pattern similar to
+		 * ibm,get-vpd et al. Since PAPR+ restricts
+		 * interleaving call sequences for other functions of
+		 * this style, assume the restriction applies here,
+		 * even though it's not explicit in the spec.
+		 */
+		.lock = &rtas_ibm_physical_attestation_lock,
 	},
 	[RTAS_FNIDX__IBM_PLATFORM_DUMP] = {
 		.name = "ibm,platform-dump",
@@ -284,6 +342,13 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = 4, .size_idx1 = 5,
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
+		/*
+		 * PAPR+ v2.13 7.3.3.4.1 indicates that concurrent
+		 * sequences of ibm,platform-dump are allowed if they
+		 * are operating on different dump tags. So leave the
+		 * lock pointer unset for now. This may need
+		 * reconsideration if kernel-internal users appear.
+		 */
 	},
 	[RTAS_FNIDX__IBM_POWER_OFF_UPS] = {
 		.name = "ibm,power-off-ups",
@@ -310,8 +375,13 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 	[RTAS_FNIDX__IBM_REMOVE_PE_DMA_WINDOW] = {
 		.name = "ibm,remove-pe-dma-window",
 	},
-	[RTAS_FNIDX__IBM_RESET_PE_DMA_WINDOWS] = {
-		.name = "ibm,reset-pe-dma-windows",
+	[RTAS_FNIDX__IBM_RESET_PE_DMA_WINDOW] = {
+		/*
+		 * Note: PAPR+ v2.13 7.3.31.4.1 spells this as
+		 * "ibm,reset-pe-dma-windows" (plural), but RTAS
+		 * implementations use the singular form in practice.
+		 */
+		.name = "ibm,reset-pe-dma-window",
 	},
 	[RTAS_FNIDX__IBM_SCAN_LOG_DUMP] = {
 		.name = "ibm,scan-log-dump",
@@ -326,6 +396,12 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = 2, .size_idx1 = -1,
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
+		/*
+		 * PAPR+ v2.13 R1–7.3.18–3 says the OS must not call
+		 * this function with different inputs until a
+		 * non-retry status has been returned.
+		 */
+		.lock = &rtas_ibm_set_dynamic_indicator_lock,
 	},
 	[RTAS_FNIDX__IBM_SET_EEH_OPTION] = {
 		.name = "ibm,set-eeh-option",
@@ -454,6 +530,11 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 	},
 };
 
+#define for_each_rtas_function(funcp)                                       \
+	for (funcp = &rtas_function_table[0];                               \
+	     funcp < &rtas_function_table[ARRAY_SIZE(rtas_function_table)]; \
+	     ++funcp)
+
 /*
  * Nearly all RTAS calls need to be serialized. All uses of the
  * default rtas_args block must hold rtas_lock.
@@ -525,10 +606,10 @@ static DEFINE_XARRAY(rtas_token_to_function_xarray);
 
 static int __init rtas_token_to_function_xarray_init(void)
 {
+	const struct rtas_function *func;
 	int err = 0;
 
-	for (size_t i = 0; i < ARRAY_SIZE(rtas_function_table); ++i) {
-		const struct rtas_function *func = &rtas_function_table[i];
+	for_each_rtas_function(func) {
 		const s32 token = func->token;
 
 		if (token == RTAS_UNKNOWN_SERVICE)
@@ -544,6 +625,21 @@ static int __init rtas_token_to_function_xarray_init(void)
 }
 arch_initcall(rtas_token_to_function_xarray_init);
 
+/*
+ * For use by sys_rtas(), where the token value is provided by user
+ * space and we don't want to warn on failed lookups.
+ */
+static const struct rtas_function *rtas_token_to_function_untrusted(s32 token)
+{
+	return xa_load(&rtas_token_to_function_xarray, token);
+}
+
+/*
+ * Reverse lookup for deriving the function descriptor from a
+ * known-good token value in contexts where the former is not already
+ * available. @token must be valid, e.g. derived from the result of a
+ * prior lookup against the function table.
+ */
 static const struct rtas_function *rtas_token_to_function(s32 token)
 {
 	const struct rtas_function *func;
@@ -551,12 +647,22 @@ static const struct rtas_function *rtas_token_to_function(s32 token)
 	if (WARN_ONCE(token < 0, "invalid token %d", token))
 		return NULL;
 
-	func = xa_load(&rtas_token_to_function_xarray, token);
-
-	if (WARN_ONCE(!func, "unexpected failed lookup for token %d", token))
-		return NULL;
+	func = rtas_token_to_function_untrusted(token);
+	if (func)
+		return func;
+	/*
+	 * Fall back to linear scan in case the reverse mapping hasn't
+	 * been initialized yet.
+	 */
+	if (xa_empty(&rtas_token_to_function_xarray)) {
+		for_each_rtas_function(func) {
+			if (func->token == token)
+				return func;
+		}
+	}
 
-	return func;
+	WARN_ONCE(true, "unexpected failed lookup for token %d", token);
+	return NULL;
 }
 
 /* This is here deliberately so it's only used in this file */
@@ -570,28 +676,25 @@ static void __do_enter_rtas(struct rtas_args *args)
 
 static void __do_enter_rtas_trace(struct rtas_args *args)
 {
-	const char *name = NULL;
+	const struct rtas_function *func = rtas_token_to_function(be32_to_cpu(args->token));
 
-	if (args == &rtas_args)
-		lockdep_assert_held(&rtas_lock);
 	/*
-	 * If the tracepoints that consume the function name aren't
-	 * active, avoid the lookup.
+	 * If there is a per-function lock, it must be held by the
+	 * caller.
 	 */
-	if ((trace_rtas_input_enabled() || trace_rtas_output_enabled())) {
-		const s32 token = be32_to_cpu(args->token);
-		const struct rtas_function *func = rtas_token_to_function(token);
+	if (func->lock)
+		lockdep_assert_held(func->lock);
 
-		name = func->name;
-	}
+	if (args == &rtas_args)
+		lockdep_assert_held(&rtas_lock);
 
-	trace_rtas_input(args, name);
+	trace_rtas_input(args, func->name);
 	trace_rtas_ll_entry(args);
 
 	__do_enter_rtas(args);
 
 	trace_rtas_ll_exit(args);
-	trace_rtas_output(args, name);
+	trace_rtas_output(args, func->name);
 }
 
 static void do_enter_rtas(struct rtas_args *args)
@@ -670,7 +773,7 @@ static void call_rtas_display_status_delay(char c)
 	static int pending_newline = 0;  /* did last write end with unprinted newline? */
 	static int width = 16;
 
-	if (c == '\n') {	
+	if (c == '\n') {
 		while (width-- > 0)
 			call_rtas_display_status(' ');
 		width = 16;
@@ -680,7 +783,7 @@ static void call_rtas_display_status_delay(char c)
 		if (pending_newline) {
 			call_rtas_display_status('\r');
 			call_rtas_display_status('\n');
-		} 
+		}
 		pending_newline = 0;
 		if (width--) {
 			call_rtas_display_status(c);
@@ -820,7 +923,7 @@ void rtas_progress(char *s, unsigned short hex)
 		else
 			rtas_call(display_character, 1, 1, NULL, '\r');
 	}
- 
+
 	if (row_width)
 		width = row_width[current_line];
 	else
@@ -840,9 +943,9 @@ void rtas_progress(char *s, unsigned short hex)
 				spin_unlock(&progress_lock);
 				return;
 			}
- 
+
 			/* RTAS wants CR-LF, not just LF */
- 
+
 			if (*os == '\n') {
 				rtas_call(display_character, 1, 1, NULL, '\r');
 				rtas_call(display_character, 1, 1, NULL, '\n');
@@ -852,7 +955,7 @@ void rtas_progress(char *s, unsigned short hex)
 				 */
 				rtas_call(display_character, 1, 1, NULL, *os);
 			}
- 
+
 			if (row_width)
 				width = row_width[current_line];
 			else
@@ -861,15 +964,15 @@ void rtas_progress(char *s, unsigned short hex)
 			width--;
 			rtas_call(display_character, 1, 1, NULL, *os);
 		}
- 
+
 		os++;
- 
+
 		/* if we overwrite the screen length */
 		if (width <= 0)
 			while ((*os != 0) && (*os != '\n') && (*os != '\r'))
 				os++;
 	}
- 
+
 	spin_unlock(&progress_lock);
 }
 EXPORT_SYMBOL_GPL(rtas_progress);		/* needed by rtas_flash module */
@@ -900,11 +1003,6 @@ int rtas_token(const char *service)
 }
 EXPORT_SYMBOL_GPL(rtas_token);
 
-int rtas_service_present(const char *service)
-{
-	return rtas_token(service) != RTAS_UNKNOWN_SERVICE;
-}
-
 #ifdef CONFIG_RTAS_ERROR_LOGGING
 
 static u32 rtas_error_log_max __ro_after_init = RTAS_ERROR_LOG_MAX;
@@ -1638,10 +1736,14 @@ void rtas_activate_firmware(void)
 		return;
 	}
 
+	mutex_lock(&rtas_ibm_activate_firmware_lock);
+
 	do {
 		fwrc = rtas_call(token, 0, 1, NULL);
 	} while (rtas_busy_delay(fwrc));
 
+	mutex_unlock(&rtas_ibm_activate_firmware_lock);
+
 	if (fwrc)
 		pr_err("ibm,activate-firmware failed (%i)\n", fwrc);
 }
@@ -1713,24 +1815,18 @@ static bool in_rmo_buf(u32 base, u32 end)
 		end < (rtas_rmo_buf + RTAS_USER_REGION_SIZE);
 }
 
-static bool block_rtas_call(int token, int nargs,
+static bool block_rtas_call(const struct rtas_function *func, int nargs,
 			    struct rtas_args *args)
 {
-	const struct rtas_function *func;
 	const struct rtas_filter *f;
-	const bool is_platform_dump = token == rtas_function_token(RTAS_FN_IBM_PLATFORM_DUMP);
-	const bool is_config_conn = token == rtas_function_token(RTAS_FN_IBM_CONFIGURE_CONNECTOR);
+	const bool is_platform_dump =
+		func == &rtas_function_table[RTAS_FNIDX__IBM_PLATFORM_DUMP];
+	const bool is_config_conn =
+		func == &rtas_function_table[RTAS_FNIDX__IBM_CONFIGURE_CONNECTOR];
 	u32 base, size, end;
 
 	/*
-	 * If this token doesn't correspond to a function the kernel
-	 * understands, you're not allowed to call it.
-	 */
-	func = rtas_token_to_function(token);
-	if (!func)
-		goto err;
-	/*
-	 * And only functions with filters attached are allowed.
+	 * Only functions with filters attached are allowed.
 	 */
 	f = func->filter;
 	if (!f)
@@ -1787,14 +1883,15 @@ static bool block_rtas_call(int token, int nargs,
 	return false;
 err:
 	pr_err_ratelimited("sys_rtas: RTAS call blocked - exploit attempt?\n");
-	pr_err_ratelimited("sys_rtas: token=0x%x, nargs=%d (called by %s)\n",
-			   token, nargs, current->comm);
+	pr_err_ratelimited("sys_rtas: %s nargs=%d (called by %s)\n",
+			   func->name, nargs, current->comm);
 	return true;
 }
 
 /* We assume to be passed big endian arguments */
 SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs)
 {
+	const struct rtas_function *func;
 	struct pin_cookie cookie;
 	struct rtas_args args;
 	unsigned long flags;
@@ -1824,13 +1921,18 @@ SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs)
 			   nargs * sizeof(rtas_arg_t)) != 0)
 		return -EFAULT;
 
-	if (token == RTAS_UNKNOWN_SERVICE)
+	/*
+	 * If this token doesn't correspond to a function the kernel
+	 * understands, you're not allowed to call it.
+	 */
+	func = rtas_token_to_function_untrusted(token);
+	if (!func)
 		return -EINVAL;
 
 	args.rets = &args.args[nargs];
 	memset(args.rets, 0, nret * sizeof(rtas_arg_t));
 
-	if (block_rtas_call(token, nargs, &args))
+	if (block_rtas_call(func, nargs, &args))
 		return -EINVAL;
 
 	if (token_is_restricted_errinjct(token)) {
@@ -1863,6 +1965,15 @@ SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs)
 
 	buff_copy = get_errorlog_buffer();
 
+	/*
+	 * If this function has a mutex assigned to it, we must
+	 * acquire it to avoid interleaving with any kernel-based uses
+	 * of the same function. Kernel-based sequences acquire the
+	 * appropriate mutex explicitly.
+	 */
+	if (func->lock)
+		mutex_lock(func->lock);
+
 	raw_spin_lock_irqsave(&rtas_lock, flags);
 	cookie = lockdep_pin_lock(&rtas_lock);
 
@@ -1878,6 +1989,9 @@ SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs)
 	lockdep_unpin_lock(&rtas_lock, cookie);
 	raw_spin_unlock_irqrestore(&rtas_lock, flags);
 
+	if (func->lock)
+		mutex_unlock(func->lock);
+
 	if (buff_copy) {
 		if (errbuf)
 			log_error(errbuf, ERR_TYPE_RTAS_LOG, 0);
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index e1fdc7473b72..fccf96e897f6 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -43,7 +43,7 @@ static inline int config_access_valid(struct pci_dn *dn, int where)
 	return 0;
 }
 
-int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
+int rtas_pci_dn_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
 {
 	int returnval = -1;
 	unsigned long buid, addr;
@@ -87,7 +87,7 @@ static int rtas_pci_read_config(struct pci_bus *bus,
 	pdn = pci_get_pdn_by_devfn(bus, devfn);
 
 	/* Validity of pdn is checked in here */
-	ret = rtas_read_config(pdn, where, size, val);
+	ret = rtas_pci_dn_read_config(pdn, where, size, val);
 	if (*val == EEH_IO_ERROR_VALUE(size) &&
 	    eeh_dev_check_failure(pdn_to_eeh_dev(pdn)))
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -95,7 +95,7 @@ static int rtas_pci_read_config(struct pci_bus *bus,
 	return ret;
 }
 
-int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val)
+int rtas_pci_dn_write_config(struct pci_dn *pdn, int where, int size, u32 val)
 {
 	unsigned long buid, addr;
 	int ret;
@@ -134,7 +134,7 @@ static int rtas_pci_write_config(struct pci_bus *bus,
 	pdn = pci_get_pdn_by_devfn(bus, devfn);
 
 	/* Validity of pdn is checked in here. */
-	return rtas_write_config(pdn, where, size, val);
+	return rtas_pci_dn_write_config(pdn, where, size, val);
 }
 
 static struct pci_ops rtas_pci_ops = {
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index ab691c89d787..693334c20d07 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -77,10 +77,10 @@ static DEFINE_PER_CPU(int, cpu_state) = { 0 };
 #endif
 
 struct task_struct *secondary_current;
-bool has_big_cores;
-bool coregroup_enabled;
-bool thread_group_shares_l2;
-bool thread_group_shares_l3;
+bool has_big_cores __ro_after_init;
+bool coregroup_enabled __ro_after_init;
+bool thread_group_shares_l2 __ro_after_init;
+bool thread_group_shares_l3 __ro_after_init;
 
 DEFINE_PER_CPU(cpumask_var_t, cpu_sibling_map);
 DEFINE_PER_CPU(cpumask_var_t, cpu_smallcore_map);
@@ -93,15 +93,6 @@ EXPORT_PER_CPU_SYMBOL(cpu_l2_cache_map);
 EXPORT_PER_CPU_SYMBOL(cpu_core_map);
 EXPORT_SYMBOL_GPL(has_big_cores);
 
-enum {
-#ifdef CONFIG_SCHED_SMT
-	smt_idx,
-#endif
-	cache_idx,
-	mc_idx,
-	die_idx,
-};
-
 #define MAX_THREAD_LIST_SIZE	8
 #define THREAD_GROUP_SHARE_L1   1
 #define THREAD_GROUP_SHARE_L2_L3 2
@@ -987,7 +978,7 @@ static int __init init_thread_group_cache_map(int cpu, int cache_property)
 	return 0;
 }
 
-static bool shared_caches;
+static bool shared_caches __ro_after_init;
 
 #ifdef CONFIG_SCHED_SMT
 /* cpumask of CPUs with asymmetric SMT dependency */
@@ -1004,6 +995,13 @@ static int powerpc_smt_flags(void)
 #endif
 
 /*
+ * On shared processor LPARs scheduled on a big core (which has two or more
+ * independent thread groups per core), prefer lower numbered CPUs, so
+ * that workload consolidates to lesser number of cores.
+ */
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(splpar_asym_pack);
+
+/*
  * P9 has a slightly odd architecture where pairs of cores share an L2 cache.
  * This topology makes it *much* cheaper to migrate tasks between adjacent cores
  * since the migrated task remains cache hot. We want to take advantage of this
@@ -1011,9 +1009,20 @@ static int powerpc_smt_flags(void)
  */
 static int powerpc_shared_cache_flags(void)
 {
+	if (static_branch_unlikely(&splpar_asym_pack))
+		return SD_SHARE_PKG_RESOURCES | SD_ASYM_PACKING;
+
 	return SD_SHARE_PKG_RESOURCES;
 }
 
+static int powerpc_shared_proc_flags(void)
+{
+	if (static_branch_unlikely(&splpar_asym_pack))
+		return SD_ASYM_PACKING;
+
+	return 0;
+}
+
 /*
  * We can't just pass cpu_l2_cache_mask() directly because
  * returns a non-const pointer and the compiler barfs on that.
@@ -1037,6 +1046,10 @@ static struct cpumask *cpu_coregroup_mask(int cpu)
 
 static bool has_coregroup_support(void)
 {
+	/* Coregroup identification not available on shared systems */
+	if (is_shared_processor())
+		return 0;
+
 	return coregroup_enabled;
 }
 
@@ -1045,16 +1058,6 @@ static const struct cpumask *cpu_mc_mask(int cpu)
 	return cpu_coregroup_mask(cpu);
 }
 
-static struct sched_domain_topology_level powerpc_topology[] = {
-#ifdef CONFIG_SCHED_SMT
-	{ cpu_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT) },
-#endif
-	{ shared_cache_mask, powerpc_shared_cache_flags, SD_INIT_NAME(CACHE) },
-	{ cpu_mc_mask, SD_INIT_NAME(MC) },
-	{ cpu_cpu_mask, SD_INIT_NAME(PKG) },
-	{ NULL, },
-};
-
 static int __init init_big_cores(void)
 {
 	int cpu;
@@ -1682,43 +1685,45 @@ void start_secondary(void *unused)
 	BUG();
 }
 
-static void __init fixup_topology(void)
+static struct sched_domain_topology_level powerpc_topology[6];
+
+static void __init build_sched_topology(void)
 {
-	int i;
+	int i = 0;
+
+	if (is_shared_processor() && has_big_cores)
+		static_branch_enable(&splpar_asym_pack);
 
 #ifdef CONFIG_SCHED_SMT
 	if (has_big_cores) {
 		pr_info("Big cores detected but using small core scheduling\n");
-		powerpc_topology[smt_idx].mask = smallcore_smt_mask;
+		powerpc_topology[i++] = (struct sched_domain_topology_level){
+			smallcore_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT)
+		};
+	} else {
+		powerpc_topology[i++] = (struct sched_domain_topology_level){
+			cpu_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT)
+		};
 	}
 #endif
+	if (shared_caches) {
+		powerpc_topology[i++] = (struct sched_domain_topology_level){
+			shared_cache_mask, powerpc_shared_cache_flags, SD_INIT_NAME(CACHE)
+		};
+	}
+	if (has_coregroup_support()) {
+		powerpc_topology[i++] = (struct sched_domain_topology_level){
+			cpu_mc_mask, powerpc_shared_proc_flags, SD_INIT_NAME(MC)
+		};
+	}
+	powerpc_topology[i++] = (struct sched_domain_topology_level){
+		cpu_cpu_mask, powerpc_shared_proc_flags, SD_INIT_NAME(PKG)
+	};
 
-	if (!has_coregroup_support())
-		powerpc_topology[mc_idx].mask = powerpc_topology[cache_idx].mask;
-
-	/*
-	 * Try to consolidate topology levels here instead of
-	 * allowing scheduler to degenerate.
-	 * - Dont consolidate if masks are different.
-	 * - Dont consolidate if sd_flags exists and are different.
-	 */
-	for (i = 1; i <= die_idx; i++) {
-		if (powerpc_topology[i].mask != powerpc_topology[i - 1].mask)
-			continue;
-
-		if (powerpc_topology[i].sd_flags && powerpc_topology[i - 1].sd_flags &&
-				powerpc_topology[i].sd_flags != powerpc_topology[i - 1].sd_flags)
-			continue;
-
-		if (!powerpc_topology[i - 1].sd_flags)
-			powerpc_topology[i - 1].sd_flags = powerpc_topology[i].sd_flags;
+	/* There must be one trailing NULL entry left.  */
+	BUG_ON(i >= ARRAY_SIZE(powerpc_topology) - 1);
 
-		powerpc_topology[i].mask = powerpc_topology[i + 1].mask;
-		powerpc_topology[i].sd_flags = powerpc_topology[i + 1].sd_flags;
-#ifdef CONFIG_SCHED_DEBUG
-		powerpc_topology[i].name = powerpc_topology[i + 1].name;
-#endif
-	}
+	set_sched_topology(powerpc_topology);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
@@ -1733,9 +1738,20 @@ void __init smp_cpus_done(unsigned int max_cpus)
 		smp_ops->bringup_done();
 
 	dump_numa_cpu_topology();
+	build_sched_topology();
+}
 
-	fixup_topology();
-	set_sched_topology(powerpc_topology);
+/*
+ * For asym packing, by default lower numbered CPU has higher priority.
+ * On shared processors, pack to lower numbered core. However avoid moving
+ * between thread_groups within the same core.
+ */
+int arch_asym_cpu_priority(int cpu)
+{
+	if (static_branch_unlikely(&splpar_asym_pack))
+		return -cpu / threads_per_core;
+
+	return -cpu;
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/powerpc/kernel/swsusp_64.c b/arch/powerpc/kernel/swsusp_64.c
index 16ee3baaf09a..50fa8fc9ef95 100644
--- a/arch/powerpc/kernel/swsusp_64.c
+++ b/arch/powerpc/kernel/swsusp_64.c
@@ -11,6 +11,8 @@
 #include <linux/interrupt.h>
 #include <linux/nmi.h>
 
+void do_after_copyback(void);
+
 void do_after_copyback(void)
 {
 	iommu_restore();
diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl
index 7fab411378f2..17173b82ca21 100644
--- a/arch/powerpc/kernel/syscalls/syscall.tbl
+++ b/arch/powerpc/kernel/syscalls/syscall.tbl
@@ -543,3 +543,8 @@
 454	common	futex_wake			sys_futex_wake
 455	common	futex_wait			sys_futex_wait
 456	common	futex_requeue			sys_futex_requeue
+457	common	statmount			sys_statmount
+458	common	listmount			sys_listmount
+459	common	lsm_get_self_attr		sys_lsm_get_self_attr
+460	common	lsm_set_self_attr		sys_lsm_set_self_attr
+461	common	lsm_list_modules		sys_lsm_list_modules
diff --git a/arch/powerpc/kernel/trace/ftrace.c b/arch/powerpc/kernel/trace/ftrace.c
index 82010629cf88..d8d6b4fd9a14 100644
--- a/arch/powerpc/kernel/trace/ftrace.c
+++ b/arch/powerpc/kernel/trace/ftrace.c
@@ -27,10 +27,22 @@
 #include <asm/ftrace.h>
 #include <asm/syscall.h>
 #include <asm/inst.h>
+#include <asm/sections.h>
 
 #define	NUM_FTRACE_TRAMPS	2
 static unsigned long ftrace_tramps[NUM_FTRACE_TRAMPS];
 
+unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	if (addr >= (unsigned long)__exittext_begin && addr < (unsigned long)__exittext_end)
+		return 0;
+
+	if (IS_ENABLED(CONFIG_ARCH_USING_PATCHABLE_FUNCTION_ENTRY))
+		addr += MCOUNT_INSN_SIZE;
+
+	return addr;
+}
+
 static ppc_inst_t ftrace_create_branch_inst(unsigned long ip, unsigned long addr, int link)
 {
 	ppc_inst_t op;
diff --git a/arch/powerpc/kernel/trace/ftrace_64_pg.c b/arch/powerpc/kernel/trace/ftrace_64_pg.c
index 7b85c3b460a3..12fab1803bcf 100644
--- a/arch/powerpc/kernel/trace/ftrace_64_pg.c
+++ b/arch/powerpc/kernel/trace/ftrace_64_pg.c
@@ -37,6 +37,11 @@
 #define	NUM_FTRACE_TRAMPS	8
 static unsigned long ftrace_tramps[NUM_FTRACE_TRAMPS];
 
+unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+
 static ppc_inst_t
 ftrace_call_replace(unsigned long ip, unsigned long addr, int link)
 {
diff --git a/arch/powerpc/kernel/trace/ftrace_entry.S b/arch/powerpc/kernel/trace/ftrace_entry.S
index 40677416d7b2..76dbe9fd2c0f 100644
--- a/arch/powerpc/kernel/trace/ftrace_entry.S
+++ b/arch/powerpc/kernel/trace/ftrace_entry.S
@@ -162,7 +162,6 @@ _GLOBAL(ftrace_regs_caller)
 .globl ftrace_regs_call
 ftrace_regs_call:
 	bl	ftrace_stub
-	nop
 	ftrace_regs_exit 1
 
 _GLOBAL(ftrace_caller)
@@ -171,7 +170,6 @@ _GLOBAL(ftrace_caller)
 .globl ftrace_call
 ftrace_call:
 	bl	ftrace_stub
-	nop
 	ftrace_regs_exit 0
 
 _GLOBAL(ftrace_stub)
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 5ea2014aff90..11e062b47d3f 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1439,10 +1439,12 @@ static int emulate_instruction(struct pt_regs *regs)
 	return -EINVAL;
 }
 
+#ifdef CONFIG_GENERIC_BUG
 int is_valid_bugaddr(unsigned long addr)
 {
 	return is_kernel_addr(addr);
 }
+#endif
 
 #ifdef CONFIG_MATH_EMULATION
 static int emulate_math(struct pt_regs *regs)
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 74ddf836f7a2..a0467e528b70 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -7,7 +7,6 @@
 #include <linux/types.h>
 #include <asm/udbg.h>
 #include <asm/io.h>
-#include <asm/reg_a2.h>
 #include <asm/early_ioremap.h>
 
 extern u8 real_readb(volatile u8 __iomem  *addr);
diff --git a/arch/powerpc/kernel/vdso/Makefile b/arch/powerpc/kernel/vdso/Makefile
index 0c7d82c270c3..1b93655c2857 100644
--- a/arch/powerpc/kernel/vdso/Makefile
+++ b/arch/powerpc/kernel/vdso/Makefile
@@ -71,7 +71,7 @@ AS64FLAGS := -D__VDSO64__
 targets += vdso32.lds
 CPPFLAGS_vdso32.lds += -P -C -Upowerpc
 targets += vdso64.lds
-CPPFLAGS_vdso64.lds += -P -C -U$(ARCH)
+CPPFLAGS_vdso64.lds += -P -C
 
 # link rule for the .so file, .lds has to be first
 $(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32) $(obj)/vgettimeofday-32.o FORCE
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 1c5970df3233..f420df7888a7 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -281,7 +281,9 @@ SECTIONS
 	 * to deal with references from __bug_table
 	 */
 	.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
+		__exittext_begin = .;
 		EXIT_TEXT
+		__exittext_end = .;
 	}
 
 	. = ALIGN(PAGE_SIZE);
diff --git a/arch/powerpc/kexec/core.c b/arch/powerpc/kexec/core.c
index 85846cadb9b5..27fa9098a5b7 100644
--- a/arch/powerpc/kexec/core.c
+++ b/arch/powerpc/kexec/core.c
@@ -75,6 +75,7 @@ void arch_crash_save_vmcoreinfo(void)
 	VMCOREINFO_OFFSET(mmu_psize_def, shift);
 #endif
 	VMCOREINFO_SYMBOL(cur_cpu_spec);
+	VMCOREINFO_OFFSET(cpu_spec, cpu_features);
 	VMCOREINFO_OFFSET(cpu_spec, mmu_features);
 	vmcoreinfo_append_str("NUMBER(RADIX_MMU)=%d\n", early_radix_enabled());
 	vmcoreinfo_append_str("KERNELOFFSET=%lx\n", kaslr_offset());
diff --git a/arch/powerpc/kexec/core_64.c b/arch/powerpc/kexec/core_64.c
index 0bee7ca9a77c..762e4d09aacf 100644
--- a/arch/powerpc/kexec/core_64.c
+++ b/arch/powerpc/kexec/core_64.c
@@ -283,8 +283,7 @@ static void kexec_prepare_cpus(void)
  * We could use a smaller stack if we don't care about anything using
  * current, but that audit has not been performed.
  */
-static union thread_union kexec_stack __init_task_data =
-	{ };
+static union thread_union kexec_stack = { };
 
 /*
  * For similar reasons to the stack above, the kexecing CPU needs to be on a
diff --git a/arch/powerpc/kexec/elf_64.c b/arch/powerpc/kexec/elf_64.c
index eeb258002d1e..904016cf89ea 100644
--- a/arch/powerpc/kexec/elf_64.c
+++ b/arch/powerpc/kexec/elf_64.c
@@ -59,7 +59,7 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
 	if (ret)
 		goto out;
 
-	pr_debug("Loaded the kernel at 0x%lx\n", kernel_load_addr);
+	kexec_dprintk("Loaded the kernel at 0x%lx\n", kernel_load_addr);
 
 	ret = kexec_load_purgatory(image, &pbuf);
 	if (ret) {
@@ -67,7 +67,7 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
 		goto out;
 	}
 
-	pr_debug("Loaded purgatory at 0x%lx\n", pbuf.mem);
+	kexec_dprintk("Loaded purgatory at 0x%lx\n", pbuf.mem);
 
 	/* Load additional segments needed for panic kernel */
 	if (image->type == KEXEC_TYPE_CRASH) {
@@ -99,7 +99,7 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
 			goto out;
 		initrd_load_addr = kbuf.mem;
 
-		pr_debug("Loaded initrd at 0x%lx\n", initrd_load_addr);
+		kexec_dprintk("Loaded initrd at 0x%lx\n", initrd_load_addr);
 	}
 
 	fdt = of_kexec_alloc_and_setup_fdt(image, initrd_load_addr,
@@ -132,7 +132,7 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
 
 	fdt_load_addr = kbuf.mem;
 
-	pr_debug("Loaded device tree at 0x%lx\n", fdt_load_addr);
+	kexec_dprintk("Loaded device tree at 0x%lx\n", fdt_load_addr);
 
 	slave_code = elf_info.buffer + elf_info.proghdrs[0].p_offset;
 	ret = setup_purgatory_ppc64(image, slave_code, fdt, kernel_load_addr,
diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c
index 961a6dd67365..5b4c5cb23354 100644
--- a/arch/powerpc/kexec/file_load_64.c
+++ b/arch/powerpc/kexec/file_load_64.c
@@ -577,7 +577,7 @@ static int add_usable_mem_property(void *fdt, struct device_node *dn,
 		       NODE_PATH_LEN, dn);
 		return -EOVERFLOW;
 	}
-	pr_debug("Memory node path: %s\n", path);
+	kexec_dprintk("Memory node path: %s\n", path);
 
 	/* Now that we know the path, find its offset in kdump kernel's fdt */
 	node = fdt_path_offset(fdt, path);
@@ -590,8 +590,8 @@ static int add_usable_mem_property(void *fdt, struct device_node *dn,
 	/* Get the address & size cells */
 	n_mem_addr_cells = of_n_addr_cells(dn);
 	n_mem_size_cells = of_n_size_cells(dn);
-	pr_debug("address cells: %d, size cells: %d\n", n_mem_addr_cells,
-		 n_mem_size_cells);
+	kexec_dprintk("address cells: %d, size cells: %d\n", n_mem_addr_cells,
+		      n_mem_size_cells);
 
 	um_info->idx  = 0;
 	if (!check_realloc_usable_mem(um_info, 2)) {
@@ -664,7 +664,7 @@ static int update_usable_mem_fdt(void *fdt, struct crash_mem *usable_mem)
 
 	node = fdt_path_offset(fdt, "/ibm,dynamic-reconfiguration-memory");
 	if (node == -FDT_ERR_NOTFOUND)
-		pr_debug("No dynamic reconfiguration memory found\n");
+		kexec_dprintk("No dynamic reconfiguration memory found\n");
 	else if (node < 0) {
 		pr_err("Malformed device tree: error reading /ibm,dynamic-reconfiguration-memory.\n");
 		return -EINVAL;
@@ -776,8 +776,8 @@ static void update_backup_region_phdr(struct kimage *image, Elf64_Ehdr *ehdr)
 	for (i = 0; i < ehdr->e_phnum; i++) {
 		if (phdr->p_paddr == BACKUP_SRC_START) {
 			phdr->p_offset = image->arch.backup_start;
-			pr_debug("Backup region offset updated to 0x%lx\n",
-				 image->arch.backup_start);
+			kexec_dprintk("Backup region offset updated to 0x%lx\n",
+				      image->arch.backup_start);
 			return;
 		}
 	}
@@ -850,7 +850,7 @@ int load_crashdump_segments_ppc64(struct kimage *image,
 		pr_err("Failed to load backup segment\n");
 		return ret;
 	}
-	pr_debug("Loaded the backup region at 0x%lx\n", kbuf->mem);
+	kexec_dprintk("Loaded the backup region at 0x%lx\n", kbuf->mem);
 
 	/* Load elfcorehdr segment - to export crashing kernel's vmcore */
 	ret = load_elfcorehdr_segment(image, kbuf);
@@ -858,8 +858,8 @@ int load_crashdump_segments_ppc64(struct kimage *image,
 		pr_err("Failed to load elfcorehdr segment\n");
 		return ret;
 	}
-	pr_debug("Loaded elf core header at 0x%lx, bufsz=0x%lx memsz=0x%lx\n",
-		 image->elf_load_addr, kbuf->bufsz, kbuf->memsz);
+	kexec_dprintk("Loaded elf core header at 0x%lx, bufsz=0x%lx memsz=0x%lx\n",
+		      image->elf_load_addr, kbuf->bufsz, kbuf->memsz);
 
 	return 0;
 }
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 902611954200..074263429faf 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -19,13 +19,11 @@ if VIRTUALIZATION
 
 config KVM
 	bool
-	select PREEMPT_NOTIFIERS
-	select HAVE_KVM_EVENTFD
+	select KVM_COMMON
 	select HAVE_KVM_VCPU_ASYNC_IOCTL
 	select KVM_VFIO
 	select IRQ_BYPASS_MANAGER
 	select HAVE_KVM_IRQ_BYPASS
-	select INTERVAL_TREE
 
 config KVM_BOOK3S_HANDLER
 	bool
@@ -42,7 +40,7 @@ config KVM_BOOK3S_64_HANDLER
 config KVM_BOOK3S_PR_POSSIBLE
 	bool
 	select KVM_MMIO
-	select MMU_NOTIFIER
+	select KVM_GENERIC_MMU_NOTIFIER
 
 config KVM_BOOK3S_HV_POSSIBLE
 	bool
@@ -85,7 +83,7 @@ config KVM_BOOK3S_64_HV
 	tristate "KVM for POWER7 and later using hypervisor mode in host"
 	depends on KVM_BOOK3S_64 && PPC_POWERNV
 	select KVM_BOOK3S_HV_POSSIBLE
-	select MMU_NOTIFIER
+	select KVM_GENERIC_MMU_NOTIFIER
 	select CMA
 	help
 	  Support running unmodified book3s_64 guest kernels in
@@ -194,7 +192,7 @@ config KVM_E500V2
 	depends on !CONTEXT_TRACKING_USER
 	select KVM
 	select KVM_MMIO
-	select MMU_NOTIFIER
+	select KVM_GENERIC_MMU_NOTIFIER
 	help
 	  Support running unmodified E500 guest kernels in virtual machines on
 	  E500v2 host processors.
@@ -211,7 +209,7 @@ config KVM_E500MC
 	select KVM
 	select KVM_MMIO
 	select KVM_BOOKE_HV
-	select MMU_NOTIFIER
+	select KVM_GENERIC_MMU_NOTIFIER
 	help
 	  Support running unmodified E500MC/E5500/E6500 guest kernels in
 	  virtual machines on E500MC/E5500/E6500 host processors.
@@ -225,7 +223,6 @@ config KVM_MPIC
 	bool "KVM in-kernel MPIC emulation"
 	depends on KVM && PPC_E500
 	select HAVE_KVM_IRQCHIP
-	select HAVE_KVM_IRQFD
 	select HAVE_KVM_IRQ_ROUTING
 	select HAVE_KVM_MSI
 	help
@@ -238,7 +235,6 @@ config KVM_XICS
 	bool "KVM in-kernel XICS emulation"
 	depends on KVM_BOOK3S_64 && !KVM_MPIC
 	select HAVE_KVM_IRQCHIP
-	select HAVE_KVM_IRQFD
 	default y
 	help
 	  Include support for the XICS (eXternal Interrupt Controller
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 6cd20ab9e94e..8acec144120e 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -302,11 +302,11 @@ static int kvmppc_book3s_irqprio_deliver(struct kvm_vcpu *vcpu,
 
 	switch (priority) {
 	case BOOK3S_IRQPRIO_DECREMENTER:
-		deliver = (kvmppc_get_msr(vcpu) & MSR_EE) && !crit;
+		deliver = !kvmhv_is_nestedv2() && (kvmppc_get_msr(vcpu) & MSR_EE) && !crit;
 		vec = BOOK3S_INTERRUPT_DECREMENTER;
 		break;
 	case BOOK3S_IRQPRIO_EXTERNAL:
-		deliver = (kvmppc_get_msr(vcpu) & MSR_EE) && !crit;
+		deliver = !kvmhv_is_nestedv2() && (kvmppc_get_msr(vcpu) & MSR_EE) && !crit;
 		vec = BOOK3S_INTERRUPT_EXTERNAL;
 		break;
 	case BOOK3S_IRQPRIO_SYSTEM_RESET:
diff --git a/arch/powerpc/kvm/book3s_64_mmu_radix.c b/arch/powerpc/kvm/book3s_64_mmu_radix.c
index 175a8eb2681f..4a1abb9f7c05 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_radix.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_radix.c
@@ -40,6 +40,9 @@ unsigned long __kvmhv_copy_tofrom_guest_radix(int lpid, int pid,
 	unsigned long quadrant, ret = n;
 	bool is_load = !!to;
 
+	if (kvmhv_is_nestedv2())
+		return H_UNSUPPORTED;
+
 	/* Can't access quadrants 1 or 2 in non-HV mode, call the HV to do it */
 	if (kvmhv_on_pseries())
 		return plpar_hcall_norets(H_COPY_TOFROM_GUEST, lpid, pid, eaddr,
@@ -97,7 +100,7 @@ static long kvmhv_copy_tofrom_guest_radix(struct kvm_vcpu *vcpu, gva_t eaddr,
 					  void *to, void *from, unsigned long n)
 {
 	int lpid = vcpu->kvm->arch.lpid;
-	int pid = kvmppc_get_pid(vcpu);
+	int pid;
 
 	/* This would cause a data segment intr so don't allow the access */
 	if (eaddr & (0x3FFUL << 52))
@@ -110,6 +113,8 @@ static long kvmhv_copy_tofrom_guest_radix(struct kvm_vcpu *vcpu, gva_t eaddr,
 	/* If accessing quadrant 3 then pid is expected to be 0 */
 	if (((eaddr >> 62) & 0x3) == 0x3)
 		pid = 0;
+	else
+		pid = kvmppc_get_pid(vcpu);
 
 	eaddr &= ~(0xFFFUL << 52);
 
diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c
index 14c6d7e318da..b569ebaa590e 100644
--- a/arch/powerpc/kvm/book3s_64_vio.c
+++ b/arch/powerpc/kvm/book3s_64_vio.c
@@ -20,6 +20,7 @@
 #include <linux/iommu.h>
 #include <linux/file.h>
 #include <linux/mm.h>
+#include <linux/rcupdate_wait.h>
 
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 1ed6ec140701..0b921704da45 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -391,6 +391,24 @@ static void kvmppc_set_pvr_hv(struct kvm_vcpu *vcpu, u32 pvr)
 /* Dummy value used in computing PCR value below */
 #define PCR_ARCH_31    (PCR_ARCH_300 << 1)
 
+static inline unsigned long map_pcr_to_cap(unsigned long pcr)
+{
+	unsigned long cap = 0;
+
+	switch (pcr) {
+	case PCR_ARCH_300:
+		cap = H_GUEST_CAP_POWER9;
+		break;
+	case PCR_ARCH_31:
+		cap = H_GUEST_CAP_POWER10;
+		break;
+	default:
+		break;
+	}
+
+	return cap;
+}
+
 static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat)
 {
 	unsigned long host_pcr_bit = 0, guest_pcr_bit = 0, cap = 0;
@@ -424,11 +442,9 @@ static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat)
 			break;
 		case PVR_ARCH_300:
 			guest_pcr_bit = PCR_ARCH_300;
-			cap = H_GUEST_CAP_POWER9;
 			break;
 		case PVR_ARCH_31:
 			guest_pcr_bit = PCR_ARCH_31;
-			cap = H_GUEST_CAP_POWER10;
 			break;
 		default:
 			return -EINVAL;
@@ -440,6 +456,12 @@ static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat)
 		return -EINVAL;
 
 	if (kvmhv_on_pseries() && kvmhv_is_nestedv2()) {
+		/*
+		 * 'arch_compat == 0' would mean the guest should default to
+		 * L1's compatibility. In this case, the guest would pick
+		 * host's PCR and evaluate the corresponding capabilities.
+		 */
+		cap = map_pcr_to_cap(guest_pcr_bit);
 		if (!(cap & nested_capabilities))
 			return -EINVAL;
 	}
@@ -650,7 +672,8 @@ static unsigned long do_h_register_vpa(struct kvm_vcpu *vcpu,
 	return err;
 }
 
-static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap)
+static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap,
+			       struct kvmppc_vpa *old_vpap)
 {
 	struct kvm *kvm = vcpu->kvm;
 	void *va;
@@ -690,9 +713,8 @@ static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap)
 		kvmppc_unpin_guest_page(kvm, va, gpa, false);
 		va = NULL;
 	}
-	if (vpap->pinned_addr)
-		kvmppc_unpin_guest_page(kvm, vpap->pinned_addr, vpap->gpa,
-					vpap->dirty);
+	*old_vpap = *vpap;
+
 	vpap->gpa = gpa;
 	vpap->pinned_addr = va;
 	vpap->dirty = false;
@@ -702,6 +724,9 @@ static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap)
 
 static void kvmppc_update_vpas(struct kvm_vcpu *vcpu)
 {
+	struct kvm *kvm = vcpu->kvm;
+	struct kvmppc_vpa old_vpa = { 0 };
+
 	if (!(vcpu->arch.vpa.update_pending ||
 	      vcpu->arch.slb_shadow.update_pending ||
 	      vcpu->arch.dtl.update_pending))
@@ -709,17 +734,34 @@ static void kvmppc_update_vpas(struct kvm_vcpu *vcpu)
 
 	spin_lock(&vcpu->arch.vpa_update_lock);
 	if (vcpu->arch.vpa.update_pending) {
-		kvmppc_update_vpa(vcpu, &vcpu->arch.vpa);
-		if (vcpu->arch.vpa.pinned_addr)
+		kvmppc_update_vpa(vcpu, &vcpu->arch.vpa, &old_vpa);
+		if (old_vpa.pinned_addr) {
+			if (kvmhv_is_nestedv2())
+				kvmhv_nestedv2_set_vpa(vcpu, ~0ull);
+			kvmppc_unpin_guest_page(kvm, old_vpa.pinned_addr, old_vpa.gpa,
+						old_vpa.dirty);
+		}
+		if (vcpu->arch.vpa.pinned_addr) {
 			init_vpa(vcpu, vcpu->arch.vpa.pinned_addr);
+			if (kvmhv_is_nestedv2())
+				kvmhv_nestedv2_set_vpa(vcpu, __pa(vcpu->arch.vpa.pinned_addr));
+		}
 	}
 	if (vcpu->arch.dtl.update_pending) {
-		kvmppc_update_vpa(vcpu, &vcpu->arch.dtl);
+		kvmppc_update_vpa(vcpu, &vcpu->arch.dtl, &old_vpa);
+		if (old_vpa.pinned_addr)
+			kvmppc_unpin_guest_page(kvm, old_vpa.pinned_addr, old_vpa.gpa,
+						old_vpa.dirty);
 		vcpu->arch.dtl_ptr = vcpu->arch.dtl.pinned_addr;
 		vcpu->arch.dtl_index = 0;
 	}
-	if (vcpu->arch.slb_shadow.update_pending)
-		kvmppc_update_vpa(vcpu, &vcpu->arch.slb_shadow);
+	if (vcpu->arch.slb_shadow.update_pending) {
+		kvmppc_update_vpa(vcpu, &vcpu->arch.slb_shadow, &old_vpa);
+		if (old_vpa.pinned_addr)
+			kvmppc_unpin_guest_page(kvm, old_vpa.pinned_addr, old_vpa.gpa,
+						old_vpa.dirty);
+	}
+
 	spin_unlock(&vcpu->arch.vpa_update_lock);
 }
 
@@ -1597,7 +1639,7 @@ static int kvmppc_handle_exit_hv(struct kvm_vcpu *vcpu,
 	 * That can happen due to a bug, or due to a machine check
 	 * occurring at just the wrong time.
 	 */
-	if (__kvmppc_get_msr_hv(vcpu) & MSR_HV) {
+	if (!kvmhv_is_nestedv2() && (__kvmppc_get_msr_hv(vcpu) & MSR_HV)) {
 		printk(KERN_EMERG "KVM trap in HV mode!\n");
 		printk(KERN_EMERG "trap=0x%x | pc=0x%lx | msr=0x%llx\n",
 			vcpu->arch.trap, kvmppc_get_pc(vcpu),
@@ -1688,7 +1730,7 @@ static int kvmppc_handle_exit_hv(struct kvm_vcpu *vcpu,
 	{
 		int i;
 
-		if (unlikely(__kvmppc_get_msr_hv(vcpu) & MSR_PR)) {
+		if (!kvmhv_is_nestedv2() && unlikely(__kvmppc_get_msr_hv(vcpu) & MSR_PR)) {
 			/*
 			 * Guest userspace executed sc 1. This can only be
 			 * reached by the P9 path because the old path
@@ -4084,6 +4126,8 @@ static int kvmhv_vcpu_entry_nestedv2(struct kvm_vcpu *vcpu, u64 time_limit,
 	if (rc < 0)
 		return -EINVAL;
 
+	kvmppc_gse_put_u64(io->vcpu_run_input, KVMPPC_GSID_LPCR, lpcr);
+
 	accumulate_time(vcpu, &vcpu->arch.in_guest);
 	rc = plpar_guest_run_vcpu(0, vcpu->kvm->arch.lpid, vcpu->vcpu_id,
 				  &trap, &i);
@@ -4736,13 +4780,19 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit,
 
 	if (!nested) {
 		kvmppc_core_prepare_to_enter(vcpu);
-		if (__kvmppc_get_msr_hv(vcpu) & MSR_EE) {
-			if (xive_interrupt_pending(vcpu))
+		if (test_bit(BOOK3S_IRQPRIO_EXTERNAL,
+			     &vcpu->arch.pending_exceptions) ||
+		    xive_interrupt_pending(vcpu)) {
+			/*
+			 * For nested HV, don't synthesize but always pass MER,
+			 * the L0 will be able to optimise that more
+			 * effectively than manipulating registers directly.
+			 */
+			if (!kvmhv_on_pseries() && (__kvmppc_get_msr_hv(vcpu) & MSR_EE))
 				kvmppc_inject_interrupt_hv(vcpu,
-						BOOK3S_INTERRUPT_EXTERNAL, 0);
-		} else if (test_bit(BOOK3S_IRQPRIO_EXTERNAL,
-			     &vcpu->arch.pending_exceptions)) {
-			lpcr |= LPCR_MER;
+							   BOOK3S_INTERRUPT_EXTERNAL, 0);
+			else
+				lpcr |= LPCR_MER;
 		}
 	} else if (vcpu->arch.pending_exceptions ||
 		   vcpu->arch.doorbell_request ||
@@ -4806,7 +4856,7 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit,
 	 * entering a nested guest in which case the decrementer is now owned
 	 * by L2 and the L1 decrementer is provided in hdec_expires
 	 */
-	if (kvmppc_core_pending_dec(vcpu) &&
+	if (!kvmhv_is_nestedv2() && kvmppc_core_pending_dec(vcpu) &&
 			((tb < kvmppc_dec_expires_host_tb(vcpu)) ||
 			 (trap == BOOK3S_INTERRUPT_SYSCALL &&
 			  kvmppc_get_gpr(vcpu, 3) == H_ENTER_NESTED)))
@@ -4949,7 +4999,7 @@ static int kvmppc_vcpu_run_hv(struct kvm_vcpu *vcpu)
 		if (run->exit_reason == KVM_EXIT_PAPR_HCALL) {
 			accumulate_time(vcpu, &vcpu->arch.hcall);
 
-			if (WARN_ON_ONCE(__kvmppc_get_msr_hv(vcpu) & MSR_PR)) {
+			if (!kvmhv_is_nestedv2() && WARN_ON_ONCE(__kvmppc_get_msr_hv(vcpu) & MSR_PR)) {
 				/*
 				 * These should have been caught reflected
 				 * into the guest by now. Final sanity check:
@@ -5691,10 +5741,12 @@ static void kvmppc_core_destroy_vm_hv(struct kvm *kvm)
 			kvmhv_set_ptbl_entry(kvm->arch.lpid, 0, 0);
 	}
 
-	if (kvmhv_is_nestedv2())
+	if (kvmhv_is_nestedv2()) {
+		kvmhv_flush_lpid(kvm->arch.lpid);
 		plpar_guest_delete(0, kvm->arch.lpid);
-	else
+	} else {
 		kvmppc_free_lpid(kvm->arch.lpid);
+	}
 
 	kvmppc_free_pimap(kvm);
 }
@@ -6210,7 +6262,7 @@ static int kvmhv_svm_off(struct kvm *kvm)
 	}
 
 	srcu_idx = srcu_read_lock(&kvm->srcu);
-	for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) {
+	for (i = 0; i < kvm_arch_nr_memslot_as_ids(kvm); i++) {
 		struct kvm_memory_slot *memslot;
 		struct kvm_memslots *slots = __kvm_memslots(kvm, i);
 		int bkt;
diff --git a/arch/powerpc/kvm/book3s_hv_nested.c b/arch/powerpc/kvm/book3s_hv_nested.c
index 3b658b8696bc..5c375ec1a3c6 100644
--- a/arch/powerpc/kvm/book3s_hv_nested.c
+++ b/arch/powerpc/kvm/book3s_hv_nested.c
@@ -503,7 +503,7 @@ void kvmhv_nested_exit(void)
 	}
 }
 
-static void kvmhv_flush_lpid(u64 lpid)
+void kvmhv_flush_lpid(u64 lpid)
 {
 	long rc;
 
diff --git a/arch/powerpc/kvm/book3s_hv_nestedv2.c b/arch/powerpc/kvm/book3s_hv_nestedv2.c
index fd3c4f2d9480..8e6f5355f08b 100644
--- a/arch/powerpc/kvm/book3s_hv_nestedv2.c
+++ b/arch/powerpc/kvm/book3s_hv_nestedv2.c
@@ -138,6 +138,7 @@ static int gs_msg_ops_vcpu_fill_info(struct kvmppc_gs_buff *gsb,
 	vector128 v;
 	int rc, i;
 	u16 iden;
+	u32 arch_compat = 0;
 
 	vcpu = gsm->data;
 
@@ -347,8 +348,23 @@ static int gs_msg_ops_vcpu_fill_info(struct kvmppc_gs_buff *gsb,
 			break;
 		}
 		case KVMPPC_GSID_LOGICAL_PVR:
-			rc = kvmppc_gse_put_u32(gsb, iden,
-						vcpu->arch.vcore->arch_compat);
+			/*
+			 * Though 'arch_compat == 0' would mean the default
+			 * compatibility, arch_compat, being a Guest Wide
+			 * Element, cannot be filled with a value of 0 in GSB
+			 * as this would result into a kernel trap.
+			 * Hence, when `arch_compat == 0`, arch_compat should
+			 * default to L1's PVR.
+			 */
+			if (!vcpu->arch.vcore->arch_compat) {
+				if (cpu_has_feature(CPU_FTR_ARCH_31))
+					arch_compat = PVR_ARCH_31;
+				else if (cpu_has_feature(CPU_FTR_ARCH_300))
+					arch_compat = PVR_ARCH_300;
+			} else {
+				arch_compat = vcpu->arch.vcore->arch_compat;
+			}
+			rc = kvmppc_gse_put_u32(gsb, iden, arch_compat);
 			break;
 		}
 
@@ -856,6 +872,35 @@ free_gsb:
 EXPORT_SYMBOL_GPL(kvmhv_nestedv2_set_ptbl_entry);
 
 /**
+ * kvmhv_nestedv2_set_vpa() - register L2 VPA with L0
+ * @vcpu: vcpu
+ * @vpa: L1 logical real address
+ */
+int kvmhv_nestedv2_set_vpa(struct kvm_vcpu *vcpu, unsigned long vpa)
+{
+	struct kvmhv_nestedv2_io *io;
+	struct kvmppc_gs_buff *gsb;
+	int rc = 0;
+
+	io = &vcpu->arch.nestedv2_io;
+	gsb = io->vcpu_run_input;
+
+	kvmppc_gsb_reset(gsb);
+	rc = kvmppc_gse_put_u64(gsb, KVMPPC_GSID_VPA, vpa);
+	if (rc < 0)
+		goto out;
+
+	rc = kvmppc_gsb_send(gsb, 0);
+	if (rc < 0)
+		pr_err("KVM-NESTEDv2: couldn't register the L2 VPA (rc=%d)\n", rc);
+
+out:
+	kvmppc_gsb_reset(gsb);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(kvmhv_nestedv2_set_vpa);
+
+/**
  * kvmhv_nestedv2_parse_output() - receive values from H_GUEST_RUN_VCPU output
  * @vcpu: vcpu
  *
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index 9118242063fb..5b92619a05fd 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -604,6 +604,7 @@ static void kvmppc_set_pvr_pr(struct kvm_vcpu *vcpu, u32 pvr)
 	case PVR_POWER8:
 	case PVR_POWER8E:
 	case PVR_POWER8NVL:
+	case PVR_HX_C2000:
 	case PVR_POWER9:
 		vcpu->arch.hflags |= BOOK3S_HFLAG_MULTI_PGSIZE |
 			BOOK3S_HFLAG_NEW_TLBIE;
diff --git a/arch/powerpc/kvm/emulate_loadstore.c b/arch/powerpc/kvm/emulate_loadstore.c
index 077fd88a0b68..ec60c7979718 100644
--- a/arch/powerpc/kvm/emulate_loadstore.c
+++ b/arch/powerpc/kvm/emulate_loadstore.c
@@ -93,7 +93,6 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 
 	emulated = EMULATE_FAIL;
 	vcpu->arch.regs.msr = kvmppc_get_msr(vcpu);
-	kvmhv_nestedv2_reload_ptregs(vcpu, &vcpu->arch.regs);
 	if (analyse_instr(&op, &vcpu->arch.regs, inst) == 0) {
 		int type = op.type & INSTR_TYPE_MASK;
 		int size = GETSIZE(op.type);
@@ -112,7 +111,7 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 						op.reg, size, !instr_byte_swap);
 
 			if ((op.type & UPDATE) && (emulated != EMULATE_FAIL))
-				kvmppc_set_gpr(vcpu, op.update_reg, op.ea);
+				kvmppc_set_gpr(vcpu, op.update_reg, vcpu->arch.vaddr_accessed);
 
 			break;
 		}
@@ -132,7 +131,7 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 					     KVM_MMIO_REG_FPR|op.reg, size, 1);
 
 			if ((op.type & UPDATE) && (emulated != EMULATE_FAIL))
-				kvmppc_set_gpr(vcpu, op.update_reg, op.ea);
+				kvmppc_set_gpr(vcpu, op.update_reg, vcpu->arch.vaddr_accessed);
 
 			break;
 #endif
@@ -224,16 +223,17 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 			break;
 		}
 #endif
-		case STORE:
-			/* if need byte reverse, op.val has been reversed by
-			 * analyse_instr().
-			 */
-			emulated = kvmppc_handle_store(vcpu, op.val, size, 1);
+		case STORE: {
+			int instr_byte_swap = op.type & BYTEREV;
+
+			emulated = kvmppc_handle_store(vcpu, kvmppc_get_gpr(vcpu, op.reg),
+						       size, !instr_byte_swap);
 
 			if ((op.type & UPDATE) && (emulated != EMULATE_FAIL))
-				kvmppc_set_gpr(vcpu, op.update_reg, op.ea);
+				kvmppc_set_gpr(vcpu, op.update_reg, vcpu->arch.vaddr_accessed);
 
 			break;
+		}
 #ifdef CONFIG_PPC_FPU
 		case STORE_FP:
 			if (kvmppc_check_fp_disabled(vcpu))
@@ -254,7 +254,7 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 					kvmppc_get_fpr(vcpu, op.reg), size, 1);
 
 			if ((op.type & UPDATE) && (emulated != EMULATE_FAIL))
-				kvmppc_set_gpr(vcpu, op.update_reg, op.ea);
+				kvmppc_set_gpr(vcpu, op.update_reg, vcpu->arch.vaddr_accessed);
 
 			break;
 #endif
@@ -358,7 +358,6 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 	}
 
 	trace_kvm_ppc_instr(ppc_inst_val(inst), kvmppc_get_pc(vcpu), emulated);
-	kvmhv_nestedv2_mark_dirty_ptregs(vcpu, &vcpu->arch.regs);
 
 	/* Advance past emulated instruction. */
 	if (emulated != EMULATE_FAIL)
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index f6af752698d0..23407fbd73c9 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -528,7 +528,6 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_ENABLE_CAP:
 	case KVM_CAP_ONE_REG:
 	case KVM_CAP_IOEVENTFD:
-	case KVM_CAP_DEVICE_CTRL:
 	case KVM_CAP_IMMEDIATE_EXIT:
 	case KVM_CAP_SET_GUEST_DEBUG:
 		r = 1;
@@ -578,7 +577,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		break;
 #endif
 
-#ifdef CONFIG_HAVE_KVM_IRQFD
+#ifdef CONFIG_HAVE_KVM_IRQCHIP
 	case KVM_CAP_IRQFD_RESAMPLE:
 		r = !xive_enabled();
 		break;
@@ -632,13 +631,8 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		break;
 #endif
 	case KVM_CAP_SYNC_MMU:
-#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
-		r = hv_enabled;
-#elif defined(KVM_ARCH_WANT_MMU_NOTIFIER)
+		BUILD_BUG_ON(!IS_ENABLED(CONFIG_KVM_GENERIC_MMU_NOTIFIER));
 		r = 1;
-#else
-		r = 0;
-#endif
 		break;
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
 	case KVM_CAP_PPC_HTAB_FD:
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 51ad0397c17a..6eac63e79a89 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -45,7 +45,7 @@ obj-$(CONFIG_FUNCTION_ERROR_INJECTION)	+= error-inject.o
 # so it is only needed for modules, and only for older linkers which
 # do not support --save-restore-funcs
 ifndef CONFIG_LD_IS_BFD
-extra-$(CONFIG_PPC64)	+= crtsavres.o
+always-$(CONFIG_PPC64)	+= crtsavres.o
 endif
 
 obj-$(CONFIG_PPC_BOOK3S_64) += copyuser_power7.o copypage_power7.o \
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index a4ab8625061a..5766180f5380 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -586,6 +586,8 @@ static int do_fp_load(struct instruction_op *op, unsigned long ea,
 	} u;
 
 	nb = GETSIZE(op->type);
+	if (nb > sizeof(u))
+		return -EINVAL;
 	if (!address_ok(regs, ea, nb))
 		return -EFAULT;
 	rn = op->reg;
@@ -636,6 +638,8 @@ static int do_fp_store(struct instruction_op *op, unsigned long ea,
 	} u;
 
 	nb = GETSIZE(op->type);
+	if (nb > sizeof(u))
+		return -EINVAL;
 	if (!address_ok(regs, ea, nb))
 		return -EFAULT;
 	rn = op->reg;
@@ -680,6 +684,9 @@ static nokprobe_inline int do_vec_load(int rn, unsigned long ea,
 		u8 b[sizeof(__vector128)];
 	} u = {};
 
+	if (size > sizeof(u))
+		return -EINVAL;
+
 	if (!address_ok(regs, ea & ~0xfUL, 16))
 		return -EFAULT;
 	/* align to multiple of size */
@@ -688,7 +695,7 @@ static nokprobe_inline int do_vec_load(int rn, unsigned long ea,
 	if (err)
 		return err;
 	if (unlikely(cross_endian))
-		do_byte_reverse(&u.b[ea & 0xf], size);
+		do_byte_reverse(&u.b[ea & 0xf], min_t(size_t, size, sizeof(u)));
 	preempt_disable();
 	if (regs->msr & MSR_VEC)
 		put_vr(rn, &u.v);
@@ -707,6 +714,9 @@ static nokprobe_inline int do_vec_store(int rn, unsigned long ea,
 		u8 b[sizeof(__vector128)];
 	} u;
 
+	if (size > sizeof(u))
+		return -EINVAL;
+
 	if (!address_ok(regs, ea & ~0xfUL, 16))
 		return -EFAULT;
 	/* align to multiple of size */
@@ -719,7 +729,7 @@ static nokprobe_inline int do_vec_store(int rn, unsigned long ea,
 		u.v = current->thread.vr_state.vr[rn];
 	preempt_enable();
 	if (unlikely(cross_endian))
-		do_byte_reverse(&u.b[ea & 0xf], size);
+		do_byte_reverse(&u.b[ea & 0xf], min_t(size_t, size, sizeof(u)));
 	return copy_mem_out(&u.b[ea & 0xf], ea, size, regs);
 }
 #endif /* CONFIG_ALTIVEC */
diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c
index ad2afa08e62e..0626a25b0d72 100644
--- a/arch/powerpc/mm/book3s64/hash_utils.c
+++ b/arch/powerpc/mm/book3s64/hash_utils.c
@@ -310,9 +310,16 @@ unsigned long htab_convert_pte_flags(unsigned long pteflags, unsigned long flags
 			else
 				rflags |= 0x3;
 		}
+		VM_WARN_ONCE(!(pteflags & _PAGE_RWX), "no-access mapping request");
 	} else {
 		if (pteflags & _PAGE_RWX)
 			rflags |= 0x2;
+		/*
+		 * We should never hit this in normal fault handling because
+		 * a permission check (check_pte_access()) will bubble this
+		 * to higher level linux handler even for PAGE_NONE.
+		 */
+		VM_WARN_ONCE(!(pteflags & _PAGE_RWX), "no-access mapping request");
 		if (!((pteflags & _PAGE_WRITE) && (pteflags & _PAGE_DIRTY)))
 			rflags |= 0x1;
 	}
diff --git a/arch/powerpc/mm/book3s64/iommu_api.c b/arch/powerpc/mm/book3s64/iommu_api.c
index d19fb1f3007d..c0e8d597e4cb 100644
--- a/arch/powerpc/mm/book3s64/iommu_api.c
+++ b/arch/powerpc/mm/book3s64/iommu_api.c
@@ -97,7 +97,7 @@ static long mm_iommu_do_alloc(struct mm_struct *mm, unsigned long ua,
 	}
 
 	mmap_read_lock(mm);
-	chunk = (1UL << (PAGE_SHIFT + MAX_ORDER)) /
+	chunk = (1UL << (PAGE_SHIFT + MAX_PAGE_ORDER)) /
 			sizeof(struct vm_area_struct *);
 	chunk = min(chunk, entries);
 	for (entry = 0; entry < entries; entry += chunk) {
diff --git a/arch/powerpc/mm/book3s64/pgtable.c b/arch/powerpc/mm/book3s64/pgtable.c
index be229290a6a7..3438ab72c346 100644
--- a/arch/powerpc/mm/book3s64/pgtable.c
+++ b/arch/powerpc/mm/book3s64/pgtable.c
@@ -542,6 +542,7 @@ void ptep_modify_prot_commit(struct vm_area_struct *vma, unsigned long addr,
 	set_pte_at(vma->vm_mm, addr, ptep, pte);
 }
 
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 /*
  * For hash translation mode, we use the deposited table to store hash slot
  * information and they are stored at PTRS_PER_PMD offset from related pmd
@@ -563,6 +564,7 @@ int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
 
 	return true;
 }
+#endif
 
 /*
  * Does the CPU support tlbie?
diff --git a/arch/powerpc/mm/book3s64/pkeys.c b/arch/powerpc/mm/book3s64/pkeys.c
index 125733962033..a974baf8f327 100644
--- a/arch/powerpc/mm/book3s64/pkeys.c
+++ b/arch/powerpc/mm/book3s64/pkeys.c
@@ -89,7 +89,8 @@ static int __init scan_pkey_feature(void)
 			unsigned long pvr = mfspr(SPRN_PVR);
 
 			if (PVR_VER(pvr) == PVR_POWER8 || PVR_VER(pvr) == PVR_POWER8E ||
-			    PVR_VER(pvr) == PVR_POWER8NVL || PVR_VER(pvr) == PVR_POWER9)
+			    PVR_VER(pvr) == PVR_POWER8NVL || PVR_VER(pvr) == PVR_POWER9 ||
+			    PVR_VER(pvr) == PVR_HX_C2000)
 				pkeys_total = 32;
 		}
 	}
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index f7c683b672c1..0a540b37aab6 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -615,7 +615,7 @@ void __init gigantic_hugetlb_cma_reserve(void)
 		order = mmu_psize_to_shift(MMU_PAGE_16G) - PAGE_SHIFT;
 
 	if (order) {
-		VM_WARN_ON(order <= MAX_ORDER);
+		VM_WARN_ON(order <= MAX_PAGE_ORDER);
 		hugetlb_cma_reserve(order);
 	}
 }
diff --git a/arch/powerpc/mm/init-common.c b/arch/powerpc/mm/init-common.c
index 119ef491f797..d3a7726ecf51 100644
--- a/arch/powerpc/mm/init-common.c
+++ b/arch/powerpc/mm/init-common.c
@@ -126,7 +126,7 @@ void pgtable_cache_add(unsigned int shift)
 	 * as to leave enough 0 bits in the address to contain it. */
 	unsigned long minalign = max(MAX_PGTABLE_INDEX_SIZE + 1,
 				     HUGEPD_SHIFT_MASK + 1);
-	struct kmem_cache *new;
+	struct kmem_cache *new = NULL;
 
 	/* It would be nice if this was a BUILD_BUG_ON(), but at the
 	 * moment, gcc doesn't seem to recognize is_power_of_2 as a
@@ -139,7 +139,8 @@ void pgtable_cache_add(unsigned int shift)
 
 	align = max_t(unsigned long, align, minalign);
 	name = kasprintf(GFP_KERNEL, "pgtable-2^%d", shift);
-	new = kmem_cache_create(name, table_size, align, 0, ctor(shift));
+	if (name)
+		new = kmem_cache_create(name, table_size, align, 0, ctor(shift));
 	if (!new)
 		panic("Could not allocate pgtable cache for order %d", shift);
 
diff --git a/arch/powerpc/mm/kasan/init_32.c b/arch/powerpc/mm/kasan/init_32.c
index a70828a6d935..aa9aa11927b2 100644
--- a/arch/powerpc/mm/kasan/init_32.c
+++ b/arch/powerpc/mm/kasan/init_32.c
@@ -64,6 +64,7 @@ int __init __weak kasan_init_region(void *start, size_t size)
 	if (ret)
 		return ret;
 
+	k_start = k_start & PAGE_MASK;
 	block = memblock_alloc(k_end - k_start, PAGE_SIZE);
 	if (!block)
 		return -ENOMEM;
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 7f9ff0640124..72341b9fb552 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -181,3 +181,8 @@ static inline bool debug_pagealloc_enabled_or_kfence(void)
 {
 	return IS_ENABLED(CONFIG_KFENCE) || debug_pagealloc_enabled();
 }
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+int create_section_mapping(unsigned long start, unsigned long end,
+			   int nid, pgprot_t prot);
+#endif
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 10b946e9c6e7..b7ff680cde96 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -2312,7 +2312,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 			struct cpu_hw_events *cpuhw;
 			cpuhw = this_cpu_ptr(&cpu_hw_events);
 			power_pmu_bhrb_read(event, cpuhw);
-			perf_sample_save_brstack(&data, event, &cpuhw->bhrb_stack);
+			perf_sample_save_brstack(&data, event, &cpuhw->bhrb_stack, NULL);
 		}
 
 		if (event->attr.sample_type & PERF_SAMPLE_DATA_SRC &&
diff --git a/arch/powerpc/perf/hv-gpci.c b/arch/powerpc/perf/hv-gpci.c
index 39dbe6b348df..27f18119fda1 100644
--- a/arch/powerpc/perf/hv-gpci.c
+++ b/arch/powerpc/perf/hv-gpci.c
@@ -534,6 +534,9 @@ static ssize_t affinity_domain_via_partition_show(struct device *dev, struct dev
 	if (!ret)
 		goto parse_result;
 
+	if (ret && (ret != H_PARAMETER))
+		goto out;
+
 	/*
 	 * ret value as 'H_PARAMETER' implies that the current buffer size
 	 * can't accommodate all the information, and a partial buffer
diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c
index 5d12ca386c1f..8664a7d297ad 100644
--- a/arch/powerpc/perf/imc-pmu.c
+++ b/arch/powerpc/perf/imc-pmu.c
@@ -299,6 +299,8 @@ static int update_events_in_group(struct device_node *node, struct imc_pmu *pmu)
 	attr_group->attrs = attrs;
 	do {
 		ev_val_str = kasprintf(GFP_KERNEL, "event=0x%x", pmu->events[i].value);
+		if (!ev_val_str)
+			continue;
 		dev_str = device_str_attr_create(pmu->events[i].name, ev_val_str);
 		if (!dev_str)
 			continue;
@@ -306,6 +308,8 @@ static int update_events_in_group(struct device_node *node, struct imc_pmu *pmu)
 		attrs[j++] = dev_str;
 		if (pmu->events[i].scale) {
 			ev_scale_str = kasprintf(GFP_KERNEL, "%s.scale", pmu->events[i].name);
+			if (!ev_scale_str)
+				continue;
 			dev_str = device_str_attr_create(ev_scale_str, pmu->events[i].scale);
 			if (!dev_str)
 				continue;
@@ -315,6 +319,8 @@ static int update_events_in_group(struct device_node *node, struct imc_pmu *pmu)
 
 		if (pmu->events[i].unit) {
 			ev_unit_str = kasprintf(GFP_KERNEL, "%s.unit", pmu->events[i].name);
+			if (!ev_unit_str)
+				continue;
 			dev_str = device_str_attr_create(ev_unit_str, pmu->events[i].unit);
 			if (!dev_str)
 				continue;
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 1624ebf95497..35a1f4b9f827 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -173,6 +173,7 @@ config ISS4xx
 config CURRITUCK
 	bool "IBM Currituck (476fpe) Support"
 	depends on PPC_47x
+	select I2C
 	select SWIOTLB
 	select 476FPE
 	select FORCE_PCI
diff --git a/arch/powerpc/platforms/44x/idle.c b/arch/powerpc/platforms/44x/idle.c
index f533b495e7db..e2eeef8dff78 100644
--- a/arch/powerpc/platforms/44x/idle.c
+++ b/arch/powerpc/platforms/44x/idle.c
@@ -27,7 +27,7 @@ static void ppc44x_idle(void)
 	isync();
 }
 
-int __init ppc44x_idle_init(void)
+static int __init ppc44x_idle_init(void)
 {
 	if (!mode_spin) {
 		/* If we are not setting spin mode 
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
index 6f08d07aee3b..e995eb30bf09 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -17,6 +17,8 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 
+#include "mpc5121_ads.h"
+
 static struct device_node *cpld_pic_node;
 static struct irq_domain *cpld_pic_host;
 
diff --git a/arch/powerpc/platforms/512x/pdm360ng.c b/arch/powerpc/platforms/512x/pdm360ng.c
index ce51cfeeb066..8bbbf78bb42b 100644
--- a/arch/powerpc/platforms/512x/pdm360ng.c
+++ b/arch/powerpc/platforms/512x/pdm360ng.c
@@ -101,7 +101,7 @@ static inline void __init pdm360ng_touchscreen_init(void)
 }
 #endif /* CONFIG_TOUCHSCREEN_ADS7846 */
 
-void __init pdm360ng_init(void)
+static void __init pdm360ng_init(void)
 {
 	mpc512x_init();
 	pdm360ng_touchscreen_init();
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index 9833c36bda83..c9664e46b03d 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -261,9 +261,10 @@ static int mpc83xx_suspend_begin(suspend_state_t state)
 
 static int agent_thread_fn(void *data)
 {
+	set_freezable();
+
 	while (1) {
-		wait_event_interruptible(agent_wq, pci_pm_state >= 2);
-		try_to_freeze();
+		wait_event_freezable(agent_wq, pci_pm_state >= 2);
 
 		if (signal_pending(current) || pci_pm_state < 2)
 			continue;
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index e966b2ad8ecd..b3327a358eb4 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -27,7 +27,7 @@
 
 #include "mpc85xx.h"
 
-void __init mpc8536_ds_pic_init(void)
+static void __init mpc8536_ds_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index ec9f60fbebc7..e0cec670d8db 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -76,7 +76,7 @@ static void __init mpc85xx_rdb_setup_arch(void)
 			/* P1025 has pins muxed for QE and other functions. To
 			* enable QE UEC mode, we need to set bit QE0 for UCC1
 			* in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
-			* and QE12 for QE MII management singals in PMUXCR
+			* and QE12 for QE MII management signals in PMUXCR
 			* register.
 			*/
 				setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
diff --git a/arch/powerpc/platforms/85xx/mvme2500.c b/arch/powerpc/platforms/85xx/mvme2500.c
index 1b59e45a0c64..19122daadb55 100644
--- a/arch/powerpc/platforms/85xx/mvme2500.c
+++ b/arch/powerpc/platforms/85xx/mvme2500.c
@@ -21,7 +21,7 @@
 
 #include "mpc85xx.h"
 
-void __init mvme2500_pic_init(void)
+static void __init mvme2500_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0,
 		  MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU,
diff --git a/arch/powerpc/platforms/85xx/p1010rdb.c b/arch/powerpc/platforms/85xx/p1010rdb.c
index 10d6f1fa3327..491895ac8bcf 100644
--- a/arch/powerpc/platforms/85xx/p1010rdb.c
+++ b/arch/powerpc/platforms/85xx/p1010rdb.c
@@ -24,7 +24,7 @@
 
 #include "mpc85xx.h"
 
-void __init p1010_rdb_pic_init(void)
+static void __init p1010_rdb_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
 	  MPIC_SINGLE_DEST_CPU,
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 0dd786a061a6..adc3a2ee1415 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -370,7 +370,7 @@ exit:
  *
  * @pixclock: the wavelength, in picoseconds, of the clock
  */
-void p1022ds_set_pixel_clock(unsigned int pixclock)
+static void p1022ds_set_pixel_clock(unsigned int pixclock)
 {
 	struct device_node *guts_np = NULL;
 	struct ccsr_guts __iomem *guts;
@@ -418,7 +418,7 @@ void p1022ds_set_pixel_clock(unsigned int pixclock)
 /**
  * p1022ds_valid_monitor_port: set the monitor port for sysfs
  */
-enum fsl_diu_monitor_port
+static enum fsl_diu_monitor_port
 p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port)
 {
 	switch (port) {
@@ -432,7 +432,7 @@ p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port)
 
 #endif
 
-void __init p1022_ds_pic_init(void)
+static void __init p1022_ds_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
 		MPIC_SINGLE_DEST_CPU,
diff --git a/arch/powerpc/platforms/85xx/p1022_rdk.c b/arch/powerpc/platforms/85xx/p1022_rdk.c
index 25ab6e9c1470..6198299d95b1 100644
--- a/arch/powerpc/platforms/85xx/p1022_rdk.c
+++ b/arch/powerpc/platforms/85xx/p1022_rdk.c
@@ -40,7 +40,7 @@
  *
  * @pixclock: the wavelength, in picoseconds, of the clock
  */
-void p1022rdk_set_pixel_clock(unsigned int pixclock)
+static void p1022rdk_set_pixel_clock(unsigned int pixclock)
 {
 	struct device_node *guts_np = NULL;
 	struct ccsr_guts __iomem *guts;
@@ -88,7 +88,7 @@ void p1022rdk_set_pixel_clock(unsigned int pixclock)
 /**
  * p1022rdk_valid_monitor_port: set the monitor port for sysfs
  */
-enum fsl_diu_monitor_port
+static enum fsl_diu_monitor_port
 p1022rdk_valid_monitor_port(enum fsl_diu_monitor_port port)
 {
 	return FSL_DIU_PORT_DVI;
@@ -96,7 +96,7 @@ p1022rdk_valid_monitor_port(enum fsl_diu_monitor_port port)
 
 #endif
 
-void __init p1022_rdk_pic_init(void)
+static void __init p1022_rdk_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
 		MPIC_SINGLE_DEST_CPU,
diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
index baa12eff6d5d..60e0b8947ce6 100644
--- a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
+++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
@@ -8,6 +8,8 @@
 #include <linux/of_irq.h>
 #include <linux/io.h>
 
+#include "socrates_fpga_pic.h"
+
 /*
  * The FPGA supports 9 interrupt sources, which can be routed to 3
  * interrupt request lines of the MPIC. The line to be used can be
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index 45f257fc1ade..2582427d8d01 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -37,7 +37,7 @@
 #define MPC85xx_L2CTL_L2I		0x40000000 /* L2 flash invalidate */
 #define MPC85xx_L2CTL_L2SIZ_MASK	0x30000000 /* L2 SRAM size (R/O) */
 
-void __init xes_mpc85xx_pic_init(void)
+static void __init xes_mpc85xx_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 67467cd6f34c..06b1e5c49d6f 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -52,10 +52,3 @@ config MPC8641
 	select MPIC
 	default y if GEF_SBC610 || GEF_SBC310 || GEF_PPC9A \
 			|| MVME7100
-
-config MPC8610
-	bool
-	select HAVE_PCI
-	select FSL_PCI if PCI
-	select PPC_UDBG_16550
-	select MPIC
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 10c1320adfd0..030de2b8c145 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -145,10 +145,11 @@ spufs_evict_inode(struct inode *inode)
 
 static void spufs_prune_dir(struct dentry *dir)
 {
-	struct dentry *dentry, *tmp;
+	struct dentry *dentry;
+	struct hlist_node *n;
 
 	inode_lock(d_inode(dir));
-	list_for_each_entry_safe(dentry, tmp, &dir->d_subdirs, d_child) {
+	hlist_for_each_entry_safe(dentry, n, &dir->d_children, d_sib) {
 		spin_lock(&dentry->d_lock);
 		if (simple_positive(dentry)) {
 			dget_dlock(dentry);
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index ef985ba2bf21..0761d98e5be3 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -64,7 +64,7 @@ static void __noreturn pas_restart(char *cmd)
 }
 
 #ifdef CONFIG_PPC_PASEMI_NEMO
-void pas_shutdown(void)
+static void pas_shutdown(void)
 {
 	/* Set the PLD bit that makes the SB600 think the power button is being pressed */
 	void __iomem *pld_map = ioremap(0xf5000000,4096);
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index c83d1e14077e..15644be31990 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -413,7 +413,7 @@ static void __init smp_psurge_setup_cpu(int cpu_nr)
 		printk(KERN_ERR "Couldn't get primary IPI interrupt");
 }
 
-void __init smp_psurge_take_timebase(void)
+static void __init smp_psurge_take_timebase(void)
 {
 	if (psurge_type != PSURGE_DUAL)
 		return;
@@ -429,7 +429,7 @@ void __init smp_psurge_take_timebase(void)
 	set_dec(tb_ticks_per_jiffy/2);
 }
 
-void __init smp_psurge_give_timebase(void)
+static void __init smp_psurge_give_timebase(void)
 {
 	/* Nothing to do here */
 }
diff --git a/arch/powerpc/platforms/powernv/opal-irqchip.c b/arch/powerpc/platforms/powernv/opal-irqchip.c
index f9a7001dacb7..56a1f7ce78d2 100644
--- a/arch/powerpc/platforms/powernv/opal-irqchip.c
+++ b/arch/powerpc/platforms/powernv/opal-irqchip.c
@@ -275,6 +275,8 @@ int __init opal_event_init(void)
 		else
 			name = kasprintf(GFP_KERNEL, "opal");
 
+		if (!name)
+			continue;
 		/* Install interrupt handler */
 		rc = request_irq(r->start, opal_interrupt, r->flags & IRQD_TRIGGER_MASK,
 				 name, NULL);
diff --git a/arch/powerpc/platforms/powernv/opal-powercap.c b/arch/powerpc/platforms/powernv/opal-powercap.c
index 7bfe4cbeb35a..ea917266aa17 100644
--- a/arch/powerpc/platforms/powernv/opal-powercap.c
+++ b/arch/powerpc/platforms/powernv/opal-powercap.c
@@ -196,6 +196,12 @@ void __init opal_powercap_init(void)
 
 		j = 0;
 		pcaps[i].pg.name = kasprintf(GFP_KERNEL, "%pOFn", node);
+		if (!pcaps[i].pg.name) {
+			kfree(pcaps[i].pattrs);
+			kfree(pcaps[i].pg.attrs);
+			goto out_pcaps_pattrs;
+		}
+
 		if (has_min) {
 			powercap_add_attr(min, "powercap-min",
 					  &pcaps[i].pattrs[j]);
diff --git a/arch/powerpc/platforms/powernv/opal-prd.c b/arch/powerpc/platforms/powernv/opal-prd.c
index 327e2f76905d..b66b06efcef1 100644
--- a/arch/powerpc/platforms/powernv/opal-prd.c
+++ b/arch/powerpc/platforms/powernv/opal-prd.c
@@ -66,6 +66,8 @@ static bool opal_prd_range_is_valid(uint64_t addr, uint64_t size)
 		const char *label;
 
 		addrp = of_get_address(node, 0, &range_size, NULL);
+		if (!addrp)
+			continue;
 
 		range_addr = of_read_number(addrp, 2);
 		range_end = range_addr + range_size;
diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c
index 262cd6fac907..748c2b97fa53 100644
--- a/arch/powerpc/platforms/powernv/opal-xscom.c
+++ b/arch/powerpc/platforms/powernv/opal-xscom.c
@@ -165,6 +165,11 @@ static int scom_debug_init_one(struct dentry *root, struct device_node *dn,
 	ent->chip = chip;
 	snprintf(ent->name, 16, "%08x", chip);
 	ent->path.data = (void *)kasprintf(GFP_KERNEL, "%pOF", dn);
+	if (!ent->path.data) {
+		kfree(ent);
+		return -ENOMEM;
+	}
+
 	ent->path.size = strlen((char *)ent->path.data);
 
 	dir = debugfs_create_dir(ent->name, root);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index cdf3838f08d3..45dd77e3ccf6 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -424,7 +424,7 @@ static int __init opal_message_init(struct device_node *opal_node)
 	return 0;
 }
 
-int opal_get_chars(uint32_t vtermno, char *buf, int count)
+ssize_t opal_get_chars(uint32_t vtermno, u8 *buf, size_t count)
 {
 	s64 rc;
 	__be64 evt, len;
@@ -441,10 +441,11 @@ int opal_get_chars(uint32_t vtermno, char *buf, int count)
 	return 0;
 }
 
-static int __opal_put_chars(uint32_t vtermno, const char *data, int total_len, bool atomic)
+static ssize_t __opal_put_chars(uint32_t vtermno, const u8 *data,
+				size_t total_len, bool atomic)
 {
 	unsigned long flags = 0 /* shut up gcc */;
-	int written;
+	ssize_t written;
 	__be64 olen;
 	s64 rc;
 
@@ -484,7 +485,7 @@ static int __opal_put_chars(uint32_t vtermno, const char *data, int total_len, b
 		if (atomic) {
 			/* Should not happen */
 			pr_warn("atomic console write returned partial "
-				"len=%d written=%d\n", total_len, written);
+				"len=%zu written=%zd\n", total_len, written);
 		}
 		if (!written)
 			written = -EAGAIN;
@@ -497,7 +498,7 @@ out:
 	return written;
 }
 
-int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
+ssize_t opal_put_chars(uint32_t vtermno, const u8 *data, size_t total_len)
 {
 	return __opal_put_chars(vtermno, data, total_len, false);
 }
@@ -508,7 +509,8 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
  * true at the moment because console space can race with OPAL's console
  * writes.
  */
-int opal_put_chars_atomic(uint32_t vtermno, const char *data, int total_len)
+ssize_t opal_put_chars_atomic(uint32_t vtermno, const u8 *data,
+			      size_t total_len)
 {
 	return __opal_put_chars(vtermno, data, total_len, true);
 }
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 28fac4770073..23f5b5093ec1 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1389,7 +1389,7 @@ static long pnv_pci_ioda2_setup_default_config(struct pnv_ioda_pe *pe)
 	 * DMA window can be larger than available memory, which will
 	 * cause errors later.
 	 */
-	const u64 maxblock = 1UL << (PAGE_SHIFT + MAX_ORDER);
+	const u64 maxblock = 1UL << (PAGE_SHIFT + MAX_PAGE_ORDER);
 
 	/*
 	 * We create the default window as big as we can. The constraint is
diff --git a/arch/powerpc/platforms/powernv/subcore.c b/arch/powerpc/platforms/powernv/subcore.c
index 191424468f10..393e747541fb 100644
--- a/arch/powerpc/platforms/powernv/subcore.c
+++ b/arch/powerpc/platforms/powernv/subcore.c
@@ -425,7 +425,8 @@ static int subcore_init(void)
 
 	if (pvr_ver != PVR_POWER8 &&
 	    pvr_ver != PVR_POWER8E &&
-	    pvr_ver != PVR_POWER8NVL)
+	    pvr_ver != PVR_POWER8NVL &&
+	    pvr_ver != PVR_HX_C2000)
 		return 0;
 
 	/*
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index a44869e5ea70..e9c1087dd42e 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -167,16 +167,4 @@ config PS3_LPM
 	  profiling support of the Cell processor with programs like
 	  perfmon2, then say Y or M, otherwise say N.
 
-config PS3GELIC_UDBG
-	bool "PS3 udbg output via UDP broadcasts on Ethernet"
-	depends on PPC_PS3
-	help
-	  Enables udbg early debugging output by sending broadcast UDP
-	  via the Ethernet port (UDP port number 18194).
-
-	  This driver uses a trivial implementation and is independent
-	  from the main PS3 gelic network driver.
-
-	  If in doubt, say N here.
-
 endmenu
diff --git a/arch/powerpc/platforms/ps3/Makefile b/arch/powerpc/platforms/ps3/Makefile
index 86bf2967a8d4..bc79bb124d1e 100644
--- a/arch/powerpc/platforms/ps3/Makefile
+++ b/arch/powerpc/platforms/ps3/Makefile
@@ -3,7 +3,7 @@ obj-y += setup.o mm.o time.o hvcall.o htab.o repository.o
 obj-y += interrupt.o exports.o os-area.o
 obj-y += system-bus.o
 
-obj-$(CONFIG_PS3GELIC_UDBG) += gelic_udbg.o
+obj-$(CONFIG_PPC_EARLY_DEBUG_PS3GELIC) += gelic_udbg.o
 obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_SPU_BASE) += spu.o
 obj-y += device-init.o
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index e87360a0fb40..878bc160246e 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -827,6 +827,7 @@ static int ps3_probe_thread(void *data)
 	if (res)
 		goto fail_free_irq;
 
+	set_freezable();
 	/* Loop here processing the requested notification events. */
 	do {
 		try_to_freeze();
diff --git a/arch/powerpc/platforms/ps3/gelic_udbg.c b/arch/powerpc/platforms/ps3/gelic_udbg.c
index 6b298010fd84..a5202c18c236 100644
--- a/arch/powerpc/platforms/ps3/gelic_udbg.c
+++ b/arch/powerpc/platforms/ps3/gelic_udbg.c
@@ -14,6 +14,7 @@
 #include <linux/ip.h>
 #include <linux/udp.h>
 
+#include <asm/ps3.h>
 #include <asm/io.h>
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 1476c5e4433c..f936962a2946 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -4,6 +4,7 @@ ccflags-$(CONFIG_PPC_PSERIES_DEBUG)	+= -DDEBUG
 
 obj-y			:= lpar.o hvCall.o nvram.o reconfig.o \
 			   of_helpers.o rtas-work-area.o papr-sysparm.o \
+			   papr-vpd.o \
 			   setup.o iommu.o event_sources.o ras.o \
 			   firmware.o power.o dlpar.o mobility.o rng.o \
 			   pci.o pci_dlpar.o eeh_pseries.o msi.o \
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index def184da51cf..b1ae0c0d1187 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -252,7 +252,7 @@ static int pseries_eeh_cap_start(struct pci_dn *pdn)
 	if (!pdn)
 		return 0;
 
-	rtas_read_config(pdn, PCI_STATUS, 2, &status);
+	rtas_pci_dn_read_config(pdn, PCI_STATUS, 2, &status);
 	if (!(status & PCI_STATUS_CAP_LIST))
 		return 0;
 
@@ -270,11 +270,11 @@ static int pseries_eeh_find_cap(struct pci_dn *pdn, int cap)
 		return 0;
 
         while (cnt--) {
-		rtas_read_config(pdn, pos, 1, &pos);
+		rtas_pci_dn_read_config(pdn, pos, 1, &pos);
 		if (pos < 0x40)
 			break;
 		pos &= ~3;
-		rtas_read_config(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
+		rtas_pci_dn_read_config(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
 		if (id == 0xff)
 			break;
 		if (id == cap)
@@ -294,7 +294,7 @@ static int pseries_eeh_find_ecap(struct pci_dn *pdn, int cap)
 
 	if (!edev || !edev->pcie_cap)
 		return 0;
-	if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+	if (rtas_pci_dn_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
 		return 0;
 	else if (!header)
 		return 0;
@@ -307,7 +307,7 @@ static int pseries_eeh_find_ecap(struct pci_dn *pdn, int cap)
 		if (pos < 256)
 			break;
 
-		if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+		if (rtas_pci_dn_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
 			break;
 	}
 
@@ -412,8 +412,8 @@ static void pseries_eeh_init_edev(struct pci_dn *pdn)
 	if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
 		edev->mode |= EEH_DEV_BRIDGE;
 		if (edev->pcie_cap) {
-			rtas_read_config(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
-					 2, &pcie_flags);
+			rtas_pci_dn_read_config(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
+						2, &pcie_flags);
 			pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4;
 			if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT)
 				edev->mode |= EEH_DEV_ROOT_PORT;
@@ -676,7 +676,7 @@ static int pseries_eeh_read_config(struct eeh_dev *edev, int where, int size, u3
 {
 	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 
-	return rtas_read_config(pdn, where, size, val);
+	return rtas_pci_dn_read_config(pdn, where, size, val);
 }
 
 /**
@@ -692,7 +692,7 @@ static int pseries_eeh_write_config(struct eeh_dev *edev, int where, int size, u
 {
 	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 
-	return rtas_write_config(pdn, where, size, val);
+	return rtas_pci_dn_write_config(pdn, where, size, val);
 }
 
 #ifdef CONFIG_PCI_IOV
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index a43bfb01720a..3fe3ddb30c04 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -208,8 +208,10 @@ static int dlpar_change_lmb_state(struct drmem_lmb *lmb, bool online)
 	int rc;
 
 	mem_block = lmb_to_memblock(lmb);
-	if (!mem_block)
+	if (!mem_block) {
+		pr_err("Failed memory block lookup for LMB 0x%x\n", lmb->drc_index);
 		return -EINVAL;
+	}
 
 	if (online && mem_block->dev.offline)
 		rc = device_online(&mem_block->dev);
@@ -436,14 +438,15 @@ static int dlpar_memory_remove_by_index(u32 drc_index)
 		}
 	}
 
-	if (!lmb_found)
+	if (!lmb_found) {
+		pr_debug("Failed to look up LMB for drc index %x\n", drc_index);
 		rc = -EINVAL;
-
-	if (rc)
+	} else if (rc) {
 		pr_debug("Failed to hot-remove memory at %llx\n",
 			 lmb->base_addr);
-	else
+	} else {
 		pr_debug("Memory at %llx was hot-removed\n", lmb->base_addr);
+	}
 
 	return rc;
 }
@@ -575,6 +578,7 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)
 	rc = update_lmb_associativity_index(lmb);
 	if (rc) {
 		dlpar_release_drc(lmb->drc_index);
+		pr_err("Failed to configure LMB 0x%x\n", lmb->drc_index);
 		return rc;
 	}
 
@@ -588,12 +592,14 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)
 	/* Add the memory */
 	rc = __add_memory(nid, lmb->base_addr, block_sz, MHP_MEMMAP_ON_MEMORY);
 	if (rc) {
+		pr_err("Failed to add LMB 0x%x to node %u", lmb->drc_index, nid);
 		invalidate_lmb_associativity_index(lmb);
 		return rc;
 	}
 
 	rc = dlpar_online_lmb(lmb);
 	if (rc) {
+		pr_err("Failed to online LMB 0x%x on node %u\n", lmb->drc_index, nid);
 		__remove_memory(lmb->base_addr, block_sz);
 		invalidate_lmb_associativity_index(lmb);
 	} else {
diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c
index 1ac52963e08b..8803c947998e 100644
--- a/arch/powerpc/platforms/pseries/hvconsole.c
+++ b/arch/powerpc/platforms/pseries/hvconsole.c
@@ -25,7 +25,7 @@
  *	firmware.
  * @count: not used?
  */
-int hvc_get_chars(uint32_t vtermno, char *buf, int count)
+ssize_t hvc_get_chars(uint32_t vtermno, u8 *buf, size_t count)
 {
 	long ret;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
@@ -52,7 +52,7 @@ EXPORT_SYMBOL(hvc_get_chars);
  *	firmware. Must be at least 16 bytes, even if count is less than 16.
  * @count: Send this number of characters.
  */
-int hvc_put_chars(uint32_t vtermno, const char *buf, int count)
+ssize_t hvc_put_chars(uint32_t vtermno, const u8 *buf, size_t count)
 {
 	unsigned long *lbuf = (unsigned long *) buf;
 	long ret;
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 496e16c588aa..e8c4129697b1 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -574,29 +574,6 @@ static void iommu_table_setparms(struct pci_controller *phb,
 
 struct iommu_table_ops iommu_table_lpar_multi_ops;
 
-/*
- * iommu_table_setparms_lpar
- *
- * Function: On pSeries LPAR systems, return TCE table info, given a pci bus.
- */
-static void iommu_table_setparms_lpar(struct pci_controller *phb,
-				      struct device_node *dn,
-				      struct iommu_table *tbl,
-				      struct iommu_table_group *table_group,
-				      const __be32 *dma_window)
-{
-	unsigned long offset, size, liobn;
-
-	of_parse_dma_window(dn, dma_window, &liobn, &offset, &size);
-
-	iommu_table_setparms_common(tbl, phb->bus->number, liobn, offset, size, IOMMU_PAGE_SHIFT_4K, NULL,
-				    &iommu_table_lpar_multi_ops);
-
-
-	table_group->tce32_start = offset;
-	table_group->tce32_size = size;
-}
-
 struct iommu_table_ops iommu_table_pseries_ops = {
 	.set = tce_build_pSeries,
 	.clear = tce_free_pSeries,
@@ -724,26 +701,71 @@ struct iommu_table_ops iommu_table_lpar_multi_ops = {
  * dynamic 64bit DMA window, walking up the device tree.
  */
 static struct device_node *pci_dma_find(struct device_node *dn,
-					const __be32 **dma_window)
+					struct dynamic_dma_window_prop *prop)
 {
-	const __be32 *dw = NULL;
+	const __be32 *default_prop = NULL;
+	const __be32 *ddw_prop = NULL;
+	struct device_node *rdn = NULL;
+	bool default_win = false, ddw_win = false;
 
 	for ( ; dn && PCI_DN(dn); dn = dn->parent) {
-		dw = of_get_property(dn, "ibm,dma-window", NULL);
-		if (dw) {
-			if (dma_window)
-				*dma_window = dw;
-			return dn;
+		default_prop = of_get_property(dn, "ibm,dma-window", NULL);
+		if (default_prop) {
+			rdn = dn;
+			default_win = true;
+		}
+		ddw_prop = of_get_property(dn, DIRECT64_PROPNAME, NULL);
+		if (ddw_prop) {
+			rdn = dn;
+			ddw_win = true;
+			break;
+		}
+		ddw_prop = of_get_property(dn, DMA64_PROPNAME, NULL);
+		if (ddw_prop) {
+			rdn = dn;
+			ddw_win = true;
+			break;
 		}
-		dw = of_get_property(dn, DIRECT64_PROPNAME, NULL);
-		if (dw)
-			return dn;
-		dw = of_get_property(dn, DMA64_PROPNAME, NULL);
-		if (dw)
-			return dn;
+
+		/* At least found default window, which is the case for normal boot */
+		if (default_win)
+			break;
 	}
 
-	return NULL;
+	/* For PCI devices there will always be a DMA window, either on the device
+	 * or parent bus
+	 */
+	WARN_ON(!(default_win | ddw_win));
+
+	/* caller doesn't want to get DMA window property */
+	if (!prop)
+		return rdn;
+
+	/* parse DMA window property. During normal system boot, only default
+	 * DMA window is passed in OF. But, for kdump, a dedicated adapter might
+	 * have both default and DDW in FDT. In this scenario, DDW takes precedence
+	 * over default window.
+	 */
+	if (ddw_win) {
+		struct dynamic_dma_window_prop *p;
+
+		p = (struct dynamic_dma_window_prop *)ddw_prop;
+		prop->liobn = p->liobn;
+		prop->dma_base = p->dma_base;
+		prop->tce_shift = p->tce_shift;
+		prop->window_shift = p->window_shift;
+	} else if (default_win) {
+		unsigned long offset, size, liobn;
+
+		of_parse_dma_window(rdn, default_prop, &liobn, &offset, &size);
+
+		prop->liobn = cpu_to_be32((u32)liobn);
+		prop->dma_base = cpu_to_be64(offset);
+		prop->tce_shift = cpu_to_be32(IOMMU_PAGE_SHIFT_4K);
+		prop->window_shift = cpu_to_be32(order_base_2(size));
+	}
+
+	return rdn;
 }
 
 static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
@@ -751,17 +773,20 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
 	struct iommu_table *tbl;
 	struct device_node *dn, *pdn;
 	struct pci_dn *ppci;
-	const __be32 *dma_window = NULL;
+	struct dynamic_dma_window_prop prop;
 
 	dn = pci_bus_to_OF_node(bus);
 
 	pr_debug("pci_dma_bus_setup_pSeriesLP: setting up bus %pOF\n",
 		 dn);
 
-	pdn = pci_dma_find(dn, &dma_window);
+	pdn = pci_dma_find(dn, &prop);
 
-	if (dma_window == NULL)
-		pr_debug("  no ibm,dma-window property !\n");
+	/* In PPC architecture, there will always be DMA window on bus or one of the
+	 * parent bus. During reboot, there will be ibm,dma-window property to
+	 * define DMA window. For kdump, there will at least be default window or DDW
+	 * or both.
+	 */
 
 	ppci = PCI_DN(pdn);
 
@@ -771,13 +796,24 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
 	if (!ppci->table_group) {
 		ppci->table_group = iommu_pseries_alloc_group(ppci->phb->node);
 		tbl = ppci->table_group->tables[0];
-		if (dma_window) {
-			iommu_table_setparms_lpar(ppci->phb, pdn, tbl,
-						  ppci->table_group, dma_window);
 
-			if (!iommu_init_table(tbl, ppci->phb->node, 0, 0))
-				panic("Failed to initialize iommu table");
-		}
+		iommu_table_setparms_common(tbl, ppci->phb->bus->number,
+				be32_to_cpu(prop.liobn),
+				be64_to_cpu(prop.dma_base),
+				1ULL << be32_to_cpu(prop.window_shift),
+				be32_to_cpu(prop.tce_shift), NULL,
+				&iommu_table_lpar_multi_ops);
+
+		/* Only for normal boot with default window. Doesn't matter even
+		 * if we set these with DDW which is 64bit during kdump, since
+		 * these will not be used during kdump.
+		 */
+		ppci->table_group->tce32_start = be64_to_cpu(prop.dma_base);
+		ppci->table_group->tce32_size = 1 << be32_to_cpu(prop.window_shift);
+
+		if (!iommu_init_table(tbl, ppci->phb->node, 0, 0))
+			panic("Failed to initialize iommu table");
+
 		iommu_register_group(ppci->table_group,
 				pci_domain_nr(bus), 0);
 		pr_debug("  created table: %p\n", ppci->table_group);
@@ -968,6 +1004,12 @@ static void find_existing_ddw_windows_named(const char *name)
 			continue;
 		}
 
+		/* If at the time of system initialization, there are DDWs in OF,
+		 * it means this is during kexec. DDW could be direct or dynamic.
+		 * We will just mark DDWs as "dynamic" since this is kdump path,
+		 * no need to worry about perforance. ddw_list_new_entry() will
+		 * set window->direct = false.
+		 */
 		window = ddw_list_new_entry(pdn, dma64);
 		if (!window) {
 			of_node_put(pdn);
@@ -1524,8 +1566,8 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 {
 	struct device_node *pdn, *dn;
 	struct iommu_table *tbl;
-	const __be32 *dma_window = NULL;
 	struct pci_dn *pci;
+	struct dynamic_dma_window_prop prop;
 
 	pr_debug("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev));
 
@@ -1538,7 +1580,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 	dn = pci_device_to_OF_node(dev);
 	pr_debug("  node is %pOF\n", dn);
 
-	pdn = pci_dma_find(dn, &dma_window);
+	pdn = pci_dma_find(dn, &prop);
 	if (!pdn || !PCI_DN(pdn)) {
 		printk(KERN_WARNING "pci_dma_dev_setup_pSeriesLP: "
 		       "no DMA window found for pci dev=%s dn=%pOF\n",
@@ -1551,8 +1593,20 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 	if (!pci->table_group) {
 		pci->table_group = iommu_pseries_alloc_group(pci->phb->node);
 		tbl = pci->table_group->tables[0];
-		iommu_table_setparms_lpar(pci->phb, pdn, tbl,
-				pci->table_group, dma_window);
+
+		iommu_table_setparms_common(tbl, pci->phb->bus->number,
+				be32_to_cpu(prop.liobn),
+				be64_to_cpu(prop.dma_base),
+				1ULL << be32_to_cpu(prop.window_shift),
+				be32_to_cpu(prop.tce_shift), NULL,
+				&iommu_table_lpar_multi_ops);
+
+		/* Only for normal boot with default window. Doesn't matter even
+		 * if we set these with DDW which is 64bit during kdump, since
+		 * these will not be used during kdump.
+		 */
+		pci->table_group->tce32_start = be64_to_cpu(prop.dma_base);
+		pci->table_group->tce32_size = 1 << be32_to_cpu(prop.window_shift);
 
 		iommu_init_table(tbl, pci->phb->node, 0, 0);
 		iommu_register_group(pci->table_group,
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 4561667832ed..4e9916bb03d7 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -662,8 +662,12 @@ u64 pseries_paravirt_steal_clock(int cpu)
 {
 	struct lppaca *lppaca = &lppaca_of(cpu);
 
-	return be64_to_cpu(READ_ONCE(lppaca->enqueue_dispatch_tb)) +
-		be64_to_cpu(READ_ONCE(lppaca->ready_enqueue_tb));
+	/*
+	 * VPA steal time counters are reported at TB frequency. Hence do a
+	 * conversion to ns before returning
+	 */
+	return tb_to_ns(be64_to_cpu(READ_ONCE(lppaca->enqueue_dispatch_tb)) +
+			be64_to_cpu(READ_ONCE(lppaca->ready_enqueue_tb)));
 }
 #endif
 
diff --git a/arch/powerpc/platforms/pseries/papr-sysparm.c b/arch/powerpc/platforms/pseries/papr-sysparm.c
index fedc61599e6c..7063ce8884e4 100644
--- a/arch/powerpc/platforms/pseries/papr-sysparm.c
+++ b/arch/powerpc/platforms/pseries/papr-sysparm.c
@@ -2,14 +2,20 @@
 
 #define pr_fmt(fmt)	"papr-sysparm: " fmt
 
+#include <linux/anon_inodes.h>
 #include <linux/bug.h>
+#include <linux/file.h>
+#include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/miscdevice.h>
 #include <linux/printk.h>
 #include <linux/slab.h>
-#include <asm/rtas.h>
+#include <linux/uaccess.h>
+#include <asm/machdep.h>
 #include <asm/papr-sysparm.h>
 #include <asm/rtas-work-area.h>
+#include <asm/rtas.h>
 
 struct papr_sysparm_buf *papr_sysparm_buf_alloc(void)
 {
@@ -23,6 +29,46 @@ void papr_sysparm_buf_free(struct papr_sysparm_buf *buf)
 	kfree(buf);
 }
 
+static size_t papr_sysparm_buf_get_length(const struct papr_sysparm_buf *buf)
+{
+	return be16_to_cpu(buf->len);
+}
+
+static void papr_sysparm_buf_set_length(struct papr_sysparm_buf *buf, size_t length)
+{
+	WARN_ONCE(length > sizeof(buf->val),
+		  "bogus length %zu, clamping to safe value", length);
+	length = min(sizeof(buf->val), length);
+	buf->len = cpu_to_be16(length);
+}
+
+/*
+ * For use on buffers returned from ibm,get-system-parameter before
+ * returning them to callers. Ensures the encoded length of valid data
+ * cannot overrun buf->val[].
+ */
+static void papr_sysparm_buf_clamp_length(struct papr_sysparm_buf *buf)
+{
+	papr_sysparm_buf_set_length(buf, papr_sysparm_buf_get_length(buf));
+}
+
+/*
+ * Perform some basic diligence on the system parameter buffer before
+ * submitting it to RTAS.
+ */
+static bool papr_sysparm_buf_can_submit(const struct papr_sysparm_buf *buf)
+{
+	/*
+	 * Firmware ought to reject buffer lengths that exceed the
+	 * maximum specified in PAPR, but there's no reason for the
+	 * kernel to allow them either.
+	 */
+	if (papr_sysparm_buf_get_length(buf) > sizeof(buf->val))
+		return false;
+
+	return true;
+}
+
 /**
  * papr_sysparm_get() - Retrieve the value of a PAPR system parameter.
  * @param: PAPR system parameter token as described in
@@ -47,7 +93,6 @@ void papr_sysparm_buf_free(struct papr_sysparm_buf *buf)
  *
  * Return: 0 on success, -errno otherwise. @buf is unmodified on error.
  */
-
 int papr_sysparm_get(papr_sysparm_t param, struct papr_sysparm_buf *buf)
 {
 	const s32 token = rtas_function_token(RTAS_FN_IBM_GET_SYSTEM_PARAMETER);
@@ -63,6 +108,9 @@ int papr_sysparm_get(papr_sysparm_t param, struct papr_sysparm_buf *buf)
 	if (token == RTAS_UNKNOWN_SERVICE)
 		return -ENOENT;
 
+	if (!papr_sysparm_buf_can_submit(buf))
+		return -EINVAL;
+
 	work_area = rtas_work_area_alloc(sizeof(*buf));
 
 	memcpy(rtas_work_area_raw_buf(work_area), buf, sizeof(*buf));
@@ -77,6 +125,7 @@ int papr_sysparm_get(papr_sysparm_t param, struct papr_sysparm_buf *buf)
 	case 0:
 		ret = 0;
 		memcpy(buf, rtas_work_area_raw_buf(work_area), sizeof(*buf));
+		papr_sysparm_buf_clamp_length(buf);
 		break;
 	case -3: /* parameter not implemented */
 		ret = -EOPNOTSUPP;
@@ -115,6 +164,9 @@ int papr_sysparm_set(papr_sysparm_t param, const struct papr_sysparm_buf *buf)
 	if (token == RTAS_UNKNOWN_SERVICE)
 		return -ENOENT;
 
+	if (!papr_sysparm_buf_can_submit(buf))
+		return -EINVAL;
+
 	work_area = rtas_work_area_alloc(sizeof(*buf));
 
 	memcpy(rtas_work_area_raw_buf(work_area), buf, sizeof(*buf));
@@ -149,3 +201,152 @@ int papr_sysparm_set(papr_sysparm_t param, const struct papr_sysparm_buf *buf)
 
 	return ret;
 }
+
+static struct papr_sysparm_buf *
+papr_sysparm_buf_from_user(const struct papr_sysparm_io_block __user *user_iob)
+{
+	struct papr_sysparm_buf *kern_spbuf;
+	long err;
+	u16 len;
+
+	/*
+	 * The length of valid data that userspace claims to be in
+	 * user_iob->data[].
+	 */
+	if (get_user(len, &user_iob->length))
+		return ERR_PTR(-EFAULT);
+
+	static_assert(sizeof(user_iob->data) >= PAPR_SYSPARM_MAX_INPUT);
+	static_assert(sizeof(kern_spbuf->val) >= PAPR_SYSPARM_MAX_INPUT);
+
+	if (len > PAPR_SYSPARM_MAX_INPUT)
+		return ERR_PTR(-EINVAL);
+
+	kern_spbuf = papr_sysparm_buf_alloc();
+	if (!kern_spbuf)
+		return ERR_PTR(-ENOMEM);
+
+	papr_sysparm_buf_set_length(kern_spbuf, len);
+
+	if (len > 0 && copy_from_user(kern_spbuf->val, user_iob->data, len)) {
+		err = -EFAULT;
+		goto free_sysparm_buf;
+	}
+
+	return kern_spbuf;
+
+free_sysparm_buf:
+	papr_sysparm_buf_free(kern_spbuf);
+	return ERR_PTR(err);
+}
+
+static int papr_sysparm_buf_to_user(const struct papr_sysparm_buf *kern_spbuf,
+				    struct papr_sysparm_io_block __user *user_iob)
+{
+	u16 len_out = papr_sysparm_buf_get_length(kern_spbuf);
+
+	if (put_user(len_out, &user_iob->length))
+		return -EFAULT;
+
+	static_assert(sizeof(user_iob->data) >= PAPR_SYSPARM_MAX_OUTPUT);
+	static_assert(sizeof(kern_spbuf->val) >= PAPR_SYSPARM_MAX_OUTPUT);
+
+	if (copy_to_user(user_iob->data, kern_spbuf->val, PAPR_SYSPARM_MAX_OUTPUT))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long papr_sysparm_ioctl_get(struct papr_sysparm_io_block __user *user_iob)
+{
+	struct papr_sysparm_buf *kern_spbuf;
+	papr_sysparm_t param;
+	long ret;
+
+	if (get_user(param.token, &user_iob->parameter))
+		return -EFAULT;
+
+	kern_spbuf = papr_sysparm_buf_from_user(user_iob);
+	if (IS_ERR(kern_spbuf))
+		return PTR_ERR(kern_spbuf);
+
+	ret = papr_sysparm_get(param, kern_spbuf);
+	if (ret)
+		goto free_sysparm_buf;
+
+	ret = papr_sysparm_buf_to_user(kern_spbuf, user_iob);
+	if (ret)
+		goto free_sysparm_buf;
+
+	ret = 0;
+
+free_sysparm_buf:
+	papr_sysparm_buf_free(kern_spbuf);
+	return ret;
+}
+
+
+static long papr_sysparm_ioctl_set(struct papr_sysparm_io_block __user *user_iob)
+{
+	struct papr_sysparm_buf *kern_spbuf;
+	papr_sysparm_t param;
+	long ret;
+
+	if (get_user(param.token, &user_iob->parameter))
+		return -EFAULT;
+
+	kern_spbuf = papr_sysparm_buf_from_user(user_iob);
+	if (IS_ERR(kern_spbuf))
+		return PTR_ERR(kern_spbuf);
+
+	ret = papr_sysparm_set(param, kern_spbuf);
+	if (ret)
+		goto free_sysparm_buf;
+
+	ret = 0;
+
+free_sysparm_buf:
+	papr_sysparm_buf_free(kern_spbuf);
+	return ret;
+}
+
+static long papr_sysparm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg)
+{
+	void __user *argp = (__force void __user *)arg;
+	long ret;
+
+	switch (ioctl) {
+	case PAPR_SYSPARM_IOC_GET:
+		ret = papr_sysparm_ioctl_get(argp);
+		break;
+	case PAPR_SYSPARM_IOC_SET:
+		if (filp->f_mode & FMODE_WRITE)
+			ret = papr_sysparm_ioctl_set(argp);
+		else
+			ret = -EBADF;
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+	return ret;
+}
+
+static const struct file_operations papr_sysparm_ops = {
+	.unlocked_ioctl = papr_sysparm_ioctl,
+};
+
+static struct miscdevice papr_sysparm_dev = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "papr-sysparm",
+	.fops = &papr_sysparm_ops,
+};
+
+static __init int papr_sysparm_init(void)
+{
+	if (!rtas_function_implemented(RTAS_FN_IBM_GET_SYSTEM_PARAMETER))
+		return -ENODEV;
+
+	return misc_register(&papr_sysparm_dev);
+}
+machine_device_initcall(pseries, papr_sysparm_init);
diff --git a/arch/powerpc/platforms/pseries/papr-vpd.c b/arch/powerpc/platforms/pseries/papr-vpd.c
new file mode 100644
index 000000000000..c29e85db5f35
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/papr-vpd.c
@@ -0,0 +1,541 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#define pr_fmt(fmt) "papr-vpd: " fmt
+
+#include <linux/anon_inodes.h>
+#include <linux/build_bug.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/lockdep.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/string_helpers.h>
+#include <linux/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/papr-vpd.h>
+#include <asm/rtas-work-area.h>
+#include <asm/rtas.h>
+#include <uapi/asm/papr-vpd.h>
+
+/*
+ * Function-specific return values for ibm,get-vpd, derived from PAPR+
+ * v2.13 7.3.20 "ibm,get-vpd RTAS Call".
+ */
+#define RTAS_IBM_GET_VPD_COMPLETE    0 /* All VPD has been retrieved. */
+#define RTAS_IBM_GET_VPD_MORE_DATA   1 /* More VPD is available. */
+#define RTAS_IBM_GET_VPD_START_OVER -4 /* VPD changed, restart call sequence. */
+
+/**
+ * struct rtas_ibm_get_vpd_params - Parameters (in and out) for ibm,get-vpd.
+ * @loc_code:  In: Caller-provided location code buffer. Must be RTAS-addressable.
+ * @work_area: In: Caller-provided work area buffer for results.
+ * @sequence:  In: Sequence number. Out: Next sequence number.
+ * @written:   Out: Bytes written by ibm,get-vpd to @work_area.
+ * @status:    Out: RTAS call status.
+ */
+struct rtas_ibm_get_vpd_params {
+	const struct papr_location_code *loc_code;
+	struct rtas_work_area *work_area;
+	u32 sequence;
+	u32 written;
+	s32 status;
+};
+
+/**
+ * rtas_ibm_get_vpd() - Call ibm,get-vpd to fill a work area buffer.
+ * @params: See &struct rtas_ibm_get_vpd_params.
+ *
+ * Calls ibm,get-vpd until it errors or successfully deposits data
+ * into the supplied work area. Handles RTAS retry statuses. Maps RTAS
+ * error statuses to reasonable errno values.
+ *
+ * The caller is expected to invoke rtas_ibm_get_vpd() multiple times
+ * to retrieve all the VPD for the provided location code. Only one
+ * sequence should be in progress at any time; starting a new sequence
+ * will disrupt any sequence already in progress. Serialization of VPD
+ * retrieval sequences is the responsibility of the caller.
+ *
+ * The caller should inspect @params.status to determine whether more
+ * calls are needed to complete the sequence.
+ *
+ * Context: May sleep.
+ * Return: -ve on error, 0 otherwise.
+ */
+static int rtas_ibm_get_vpd(struct rtas_ibm_get_vpd_params *params)
+{
+	const struct papr_location_code *loc_code = params->loc_code;
+	struct rtas_work_area *work_area = params->work_area;
+	u32 rets[2];
+	s32 fwrc;
+	int ret;
+
+	lockdep_assert_held(&rtas_ibm_get_vpd_lock);
+
+	do {
+		fwrc = rtas_call(rtas_function_token(RTAS_FN_IBM_GET_VPD), 4, 3,
+				 rets,
+				 __pa(loc_code),
+				 rtas_work_area_phys(work_area),
+				 rtas_work_area_size(work_area),
+				 params->sequence);
+	} while (rtas_busy_delay(fwrc));
+
+	switch (fwrc) {
+	case RTAS_HARDWARE_ERROR:
+		ret = -EIO;
+		break;
+	case RTAS_INVALID_PARAMETER:
+		ret = -EINVAL;
+		break;
+	case RTAS_IBM_GET_VPD_START_OVER:
+		ret = -EAGAIN;
+		break;
+	case RTAS_IBM_GET_VPD_MORE_DATA:
+		params->sequence = rets[0];
+		fallthrough;
+	case RTAS_IBM_GET_VPD_COMPLETE:
+		params->written = rets[1];
+		/*
+		 * Kernel or firmware bug, do not continue.
+		 */
+		if (WARN(params->written > rtas_work_area_size(work_area),
+			 "possible write beyond end of work area"))
+			ret = -EFAULT;
+		else
+			ret = 0;
+		break;
+	default:
+		ret = -EIO;
+		pr_err_ratelimited("unexpected ibm,get-vpd status %d\n", fwrc);
+		break;
+	}
+
+	params->status = fwrc;
+	return ret;
+}
+
+/*
+ * Internal VPD "blob" APIs for accumulating ibm,get-vpd results into
+ * an immutable buffer to be attached to a file descriptor.
+ */
+struct vpd_blob {
+	const char *data;
+	size_t len;
+};
+
+static bool vpd_blob_has_data(const struct vpd_blob *blob)
+{
+	return blob->data && blob->len;
+}
+
+static void vpd_blob_free(const struct vpd_blob *blob)
+{
+	if (blob) {
+		kvfree(blob->data);
+		kfree(blob);
+	}
+}
+
+/**
+ * vpd_blob_extend() - Append data to a &struct vpd_blob.
+ * @blob: The blob to extend.
+ * @data: The new data to append to @blob.
+ * @len:  The length of @data.
+ *
+ * Context: May sleep.
+ * Return: -ENOMEM on allocation failure, 0 otherwise.
+ */
+static int vpd_blob_extend(struct vpd_blob *blob, const char *data, size_t len)
+{
+	const size_t new_len = blob->len + len;
+	const size_t old_len = blob->len;
+	const char *old_ptr = blob->data;
+	char *new_ptr;
+
+	new_ptr = old_ptr ?
+		kvrealloc(old_ptr, old_len, new_len, GFP_KERNEL_ACCOUNT) :
+		kvmalloc(len, GFP_KERNEL_ACCOUNT);
+
+	if (!new_ptr)
+		return -ENOMEM;
+
+	memcpy(&new_ptr[old_len], data, len);
+	blob->data = new_ptr;
+	blob->len = new_len;
+	return 0;
+}
+
+/**
+ * vpd_blob_generate() - Construct a new &struct vpd_blob.
+ * @generator: Function that supplies the blob data.
+ * @arg:       Context pointer supplied by caller, passed to @generator.
+ *
+ * The @generator callback is invoked until it returns NULL. @arg is
+ * passed to @generator in its first argument on each call. When
+ * @generator returns data, it should store the data length in its
+ * second argument.
+ *
+ * Context: May sleep.
+ * Return: A completely populated &struct vpd_blob, or NULL on error.
+ */
+static const struct vpd_blob *
+vpd_blob_generate(const char * (*generator)(void *, size_t *), void *arg)
+{
+	struct vpd_blob *blob;
+	const char *buf;
+	size_t len;
+	int err = 0;
+
+	blob  = kzalloc(sizeof(*blob), GFP_KERNEL_ACCOUNT);
+	if (!blob)
+		return NULL;
+
+	while (err == 0 && (buf = generator(arg, &len)))
+		err = vpd_blob_extend(blob, buf, len);
+
+	if (err != 0 || !vpd_blob_has_data(blob))
+		goto free_blob;
+
+	return blob;
+free_blob:
+	vpd_blob_free(blob);
+	return NULL;
+}
+
+/*
+ * Internal VPD sequence APIs. A VPD sequence is a series of calls to
+ * ibm,get-vpd for a given location code. The sequence ends when an
+ * error is encountered or all VPD for the location code has been
+ * returned.
+ */
+
+/**
+ * struct vpd_sequence - State for managing a VPD sequence.
+ * @error:  Shall be zero as long as the sequence has not encountered an error,
+ *          -ve errno otherwise. Use vpd_sequence_set_err() to update this.
+ * @params: Parameter block to pass to rtas_ibm_get_vpd().
+ */
+struct vpd_sequence {
+	int error;
+	struct rtas_ibm_get_vpd_params params;
+};
+
+/**
+ * vpd_sequence_begin() - Begin a VPD retrieval sequence.
+ * @seq:      Uninitialized sequence state.
+ * @loc_code: Location code that defines the scope of the VPD to return.
+ *
+ * Initializes @seq with the resources necessary to carry out a VPD
+ * sequence. Callers must pass @seq to vpd_sequence_end() regardless
+ * of whether the sequence succeeds.
+ *
+ * Context: May sleep.
+ */
+static void vpd_sequence_begin(struct vpd_sequence *seq,
+			       const struct papr_location_code *loc_code)
+{
+	/*
+	 * Use a static data structure for the location code passed to
+	 * RTAS to ensure it's in the RMA and avoid a separate work
+	 * area allocation. Guarded by the function lock.
+	 */
+	static struct papr_location_code static_loc_code;
+
+	/*
+	 * We could allocate the work area before acquiring the
+	 * function lock, but that would allow concurrent requests to
+	 * exhaust the limited work area pool for no benefit. So
+	 * allocate the work area under the lock.
+	 */
+	mutex_lock(&rtas_ibm_get_vpd_lock);
+	static_loc_code = *loc_code;
+	*seq = (struct vpd_sequence) {
+		.params = {
+			.work_area = rtas_work_area_alloc(SZ_4K),
+			.loc_code = &static_loc_code,
+			.sequence = 1,
+		},
+	};
+}
+
+/**
+ * vpd_sequence_end() - Finalize a VPD retrieval sequence.
+ * @seq: Sequence state.
+ *
+ * Releases resources obtained by vpd_sequence_begin().
+ */
+static void vpd_sequence_end(struct vpd_sequence *seq)
+{
+	rtas_work_area_free(seq->params.work_area);
+	mutex_unlock(&rtas_ibm_get_vpd_lock);
+}
+
+/**
+ * vpd_sequence_should_stop() - Determine whether a VPD retrieval sequence
+ *                              should continue.
+ * @seq: VPD sequence state.
+ *
+ * Examines the sequence error state and outputs of the last call to
+ * ibm,get-vpd to determine whether the sequence in progress should
+ * continue or stop.
+ *
+ * Return: True if the sequence has encountered an error or if all VPD for
+ *         this sequence has been retrieved. False otherwise.
+ */
+static bool vpd_sequence_should_stop(const struct vpd_sequence *seq)
+{
+	bool done;
+
+	if (seq->error)
+		return true;
+
+	switch (seq->params.status) {
+	case 0:
+		if (seq->params.written == 0)
+			done = false; /* Initial state. */
+		else
+			done = true; /* All data consumed. */
+		break;
+	case 1:
+		done = false; /* More data available. */
+		break;
+	default:
+		done = true; /* Error encountered. */
+		break;
+	}
+
+	return done;
+}
+
+static int vpd_sequence_set_err(struct vpd_sequence *seq, int err)
+{
+	/* Preserve the first error recorded. */
+	if (seq->error == 0)
+		seq->error = err;
+
+	return seq->error;
+}
+
+/*
+ * Generator function to be passed to vpd_blob_generate().
+ */
+static const char *vpd_sequence_fill_work_area(void *arg, size_t *len)
+{
+	struct vpd_sequence *seq = arg;
+	struct rtas_ibm_get_vpd_params *p = &seq->params;
+
+	if (vpd_sequence_should_stop(seq))
+		return NULL;
+	if (vpd_sequence_set_err(seq, rtas_ibm_get_vpd(p)))
+		return NULL;
+	*len = p->written;
+	return rtas_work_area_raw_buf(p->work_area);
+}
+
+/*
+ * Higher-level VPD retrieval code below. These functions use the
+ * vpd_blob_* and vpd_sequence_* APIs defined above to create fd-based
+ * VPD handles for consumption by user space.
+ */
+
+/**
+ * papr_vpd_run_sequence() - Run a single VPD retrieval sequence.
+ * @loc_code: Location code that defines the scope of VPD to return.
+ *
+ * Context: May sleep. Holds a mutex and an RTAS work area for its
+ *          duration. Typically performs multiple sleepable slab
+ *          allocations.
+ *
+ * Return: A populated &struct vpd_blob on success. Encoded error
+ * pointer otherwise.
+ */
+static const struct vpd_blob *papr_vpd_run_sequence(const struct papr_location_code *loc_code)
+{
+	const struct vpd_blob *blob;
+	struct vpd_sequence seq;
+
+	vpd_sequence_begin(&seq, loc_code);
+	blob = vpd_blob_generate(vpd_sequence_fill_work_area, &seq);
+	if (!blob)
+		vpd_sequence_set_err(&seq, -ENOMEM);
+	vpd_sequence_end(&seq);
+
+	if (seq.error) {
+		vpd_blob_free(blob);
+		return ERR_PTR(seq.error);
+	}
+
+	return blob;
+}
+
+/**
+ * papr_vpd_retrieve() - Return the VPD for a location code.
+ * @loc_code: Location code that defines the scope of VPD to return.
+ *
+ * Run VPD sequences against @loc_code until a blob is successfully
+ * instantiated, or a hard error is encountered, or a fatal signal is
+ * pending.
+ *
+ * Context: May sleep.
+ * Return: A fully populated VPD blob when successful. Encoded error
+ * pointer otherwise.
+ */
+static const struct vpd_blob *papr_vpd_retrieve(const struct papr_location_code *loc_code)
+{
+	const struct vpd_blob *blob;
+
+	/*
+	 * EAGAIN means the sequence errored with a -4 (VPD changed)
+	 * status from ibm,get-vpd, and we should attempt a new
+	 * sequence. PAPR+ v2.13 R1–7.3.20–5 indicates that this
+	 * should be a transient condition, not something that happens
+	 * continuously. But we'll stop trying on a fatal signal.
+	 */
+	do {
+		blob = papr_vpd_run_sequence(loc_code);
+		if (!IS_ERR(blob)) /* Success. */
+			break;
+		if (PTR_ERR(blob) != -EAGAIN) /* Hard error. */
+			break;
+		pr_info_ratelimited("VPD changed during retrieval, retrying\n");
+		cond_resched();
+	} while (!fatal_signal_pending(current));
+
+	return blob;
+}
+
+static ssize_t papr_vpd_handle_read(struct file *file, char __user *buf, size_t size, loff_t *off)
+{
+	const struct vpd_blob *blob = file->private_data;
+
+	/* bug: we should not instantiate a handle without any data attached. */
+	if (!vpd_blob_has_data(blob)) {
+		pr_err_once("handle without data\n");
+		return -EIO;
+	}
+
+	return simple_read_from_buffer(buf, size, off, blob->data, blob->len);
+}
+
+static int papr_vpd_handle_release(struct inode *inode, struct file *file)
+{
+	const struct vpd_blob *blob = file->private_data;
+
+	vpd_blob_free(blob);
+
+	return 0;
+}
+
+static loff_t papr_vpd_handle_seek(struct file *file, loff_t off, int whence)
+{
+	const struct vpd_blob *blob = file->private_data;
+
+	return fixed_size_llseek(file, off, whence, blob->len);
+}
+
+
+static const struct file_operations papr_vpd_handle_ops = {
+	.read = papr_vpd_handle_read,
+	.llseek = papr_vpd_handle_seek,
+	.release = papr_vpd_handle_release,
+};
+
+/**
+ * papr_vpd_create_handle() - Create a fd-based handle for reading VPD.
+ * @ulc: Location code in user memory; defines the scope of the VPD to
+ *       retrieve.
+ *
+ * Handler for PAPR_VPD_IOC_CREATE_HANDLE ioctl command. Validates
+ * @ulc and instantiates an immutable VPD "blob" for it. The blob is
+ * attached to a file descriptor for reading by user space. The memory
+ * backing the blob is freed when the file is released.
+ *
+ * The entire requested VPD is retrieved by this call and all
+ * necessary RTAS interactions are performed before returning the fd
+ * to user space. This keeps the read handler simple and ensures that
+ * the kernel can prevent interleaving of ibm,get-vpd call sequences.
+ *
+ * Return: The installed fd number if successful, -ve errno otherwise.
+ */
+static long papr_vpd_create_handle(struct papr_location_code __user *ulc)
+{
+	struct papr_location_code klc;
+	const struct vpd_blob *blob;
+	struct file *file;
+	long err;
+	int fd;
+
+	if (copy_from_user(&klc, ulc, sizeof(klc)))
+		return -EFAULT;
+
+	if (!string_is_terminated(klc.str, ARRAY_SIZE(klc.str)))
+		return -EINVAL;
+
+	blob = papr_vpd_retrieve(&klc);
+	if (IS_ERR(blob))
+		return PTR_ERR(blob);
+
+	fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
+	if (fd < 0) {
+		err = fd;
+		goto free_blob;
+	}
+
+	file = anon_inode_getfile("[papr-vpd]", &papr_vpd_handle_ops,
+				  (void *)blob, O_RDONLY);
+	if (IS_ERR(file)) {
+		err = PTR_ERR(file);
+		goto put_fd;
+	}
+
+	file->f_mode |= FMODE_LSEEK | FMODE_PREAD;
+	fd_install(fd, file);
+	return fd;
+put_fd:
+	put_unused_fd(fd);
+free_blob:
+	vpd_blob_free(blob);
+	return err;
+}
+
+/*
+ * Top-level ioctl handler for /dev/papr-vpd.
+ */
+static long papr_vpd_dev_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg)
+{
+	void __user *argp = (__force void __user *)arg;
+	long ret;
+
+	switch (ioctl) {
+	case PAPR_VPD_IOC_CREATE_HANDLE:
+		ret = papr_vpd_create_handle(argp);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+	return ret;
+}
+
+static const struct file_operations papr_vpd_ops = {
+	.unlocked_ioctl = papr_vpd_dev_ioctl,
+};
+
+static struct miscdevice papr_vpd_dev = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "papr-vpd",
+	.fops = &papr_vpd_ops,
+};
+
+static __init int papr_vpd_init(void)
+{
+	if (!rtas_function_implemented(RTAS_FN_IBM_GET_VPD))
+		return -ENODEV;
+
+	return misc_register(&papr_vpd_dev);
+}
+machine_device_initcall(pseries, papr_vpd_init);
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 4ba824568119..4448386268d9 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -35,6 +35,8 @@ struct pci_controller *init_phb_dynamic(struct device_node *dn)
 
 	pseries_msi_allocate_domains(phb);
 
+	ppc_iommu_register_device(phb);
+
 	/* Create EEH devices for the PHB */
 	eeh_phb_pe_create(phb);
 
@@ -76,6 +78,8 @@ int remove_phb_dynamic(struct pci_controller *phb)
 		}
 	}
 
+	ppc_iommu_unregister_device(phb);
+
 	pseries_msi_free_domains(phb);
 
 	/* Keep a reference so phb isn't freed yet */
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 8376f03f932a..bba4ad192b0f 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -55,6 +55,7 @@ extern int dlpar_detach_node(struct device_node *);
 extern int dlpar_acquire_drc(u32 drc_index);
 extern int dlpar_release_drc(u32 drc_index);
 extern int dlpar_unisolate_drc(u32 drc_index);
+extern void post_mobility_fixup(void);
 
 void queue_hotplug_event(struct pseries_hp_errorlog *hp_errlog);
 int handle_dlpar_errorlog(struct pseries_hp_errorlog *hp_errlog);
diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c
index 5c43435472cc..382003dfdb9a 100644
--- a/arch/powerpc/platforms/pseries/suspend.c
+++ b/arch/powerpc/platforms/pseries/suspend.c
@@ -13,6 +13,7 @@
 #include <asm/mmu.h>
 #include <asm/rtas.h>
 #include <asm/topology.h>
+#include "pseries.h"
 
 static struct device suspend_dev;
 
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 3868483fbe29..ef7707ea0db7 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -54,7 +54,7 @@ static void quirk_fsl_pcie_early(struct pci_dev *dev)
 
 	/* if we aren't in host mode don't bother */
 	pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type);
-	if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
+	if ((hdr_type & PCI_HEADER_TYPE_MASK) != PCI_HEADER_TYPE_BRIDGE)
 		return;
 
 	dev->class = PCI_CLASS_BRIDGE_PCI_NORMAL;
@@ -581,7 +581,7 @@ static int fsl_add_bridge(struct platform_device *pdev, int is_primary)
 		hose->ops = &fsl_indirect_pcie_ops;
 		/* For PCIE read HEADER_TYPE to identify controller mode */
 		early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type);
-		if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
+		if ((hdr_type & PCI_HEADER_TYPE_MASK) != PCI_HEADER_TYPE_BRIDGE)
 			goto no_bridge;
 
 	} else {
diff --git a/arch/powerpc/sysdev/grackle.c b/arch/powerpc/sysdev/grackle.c
index fd2f94a884f0..7dce8278b71e 100644
--- a/arch/powerpc/sysdev/grackle.c
+++ b/arch/powerpc/sysdev/grackle.c
@@ -18,24 +18,8 @@
 #define GRACKLE_CFA(b, d, o)	(0x80 | ((b) << 8) | ((d) << 16) \
 				 | (((o) & ~3) << 24))
 
-#define GRACKLE_PICR1_STG		0x00000040
 #define GRACKLE_PICR1_LOOPSNOOP		0x00000010
 
-/* N.B. this is called before bridges is initialized, so we can't
-   use grackle_pcibios_{read,write}_config_dword. */
-static inline void grackle_set_stg(struct pci_controller* bp, int enable)
-{
-	unsigned int val;
-
-	out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
-	val = in_le32(bp->cfg_data);
-	val = enable? (val | GRACKLE_PICR1_STG) :
-		(val & ~GRACKLE_PICR1_STG);
-	out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
-	out_le32(bp->cfg_data, val);
-	(void)in_le32(bp->cfg_data);
-}
-
 static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable)
 {
 	unsigned int val;
@@ -56,7 +40,4 @@ void __init setup_grackle(struct pci_controller *hose)
 		pci_add_flags(PCI_REASSIGN_ALL_BUS);
 	if (of_machine_is_compatible("AAPL,PowerBook1998"))
 		grackle_set_loop_snoop(hose, 1);
-#if 0	/* Disabled for now, HW problems ??? */
-	grackle_set_stg(hose, 1);
-#endif
 }
diff --git a/arch/powerpc/sysdev/udbg_memcons.c b/arch/powerpc/sysdev/udbg_memcons.c
index 5020044400dc..4de57ba52236 100644
--- a/arch/powerpc/sysdev/udbg_memcons.c
+++ b/arch/powerpc/sysdev/udbg_memcons.c
@@ -41,7 +41,7 @@ struct memcons memcons = {
 	.input_end = &memcons_input[CONFIG_PPC_MEMCONS_INPUT_SIZE],
 };
 
-void memcons_putc(char c)
+static void memcons_putc(char c)
 {
 	char *new_output_pos;
 
@@ -54,7 +54,7 @@ void memcons_putc(char c)
 	memcons.output_pos = new_output_pos;
 }
 
-int memcons_getc_poll(void)
+static int memcons_getc_poll(void)
 {
 	char c;
 	char *new_input_pos;
@@ -77,7 +77,7 @@ int memcons_getc_poll(void)
 	return -1;
 }
 
-int memcons_getc(void)
+static int memcons_getc(void)
 {
 	int c;
 
diff --git a/arch/powerpc/sysdev/xics/icp-native.c b/arch/powerpc/sysdev/xics/icp-native.c
index f6ec6dba92dc..700b67476a7d 100644
--- a/arch/powerpc/sysdev/xics/icp-native.c
+++ b/arch/powerpc/sysdev/xics/icp-native.c
@@ -236,6 +236,8 @@ static int __init icp_native_map_one_cpu(int hw_id, unsigned long addr,
 	rname = kasprintf(GFP_KERNEL, "CPU %d [0x%x] Interrupt Presentation",
 			  cpu, hw_id);
 
+	if (!rname)
+		return -ENOMEM;
 	if (!request_mem_region(addr, size, rname)) {
 		pr_warn("icp_native: Could not reserve ICP MMIO for CPU %d, interrupt server #0x%x\n",
 			cpu, hw_id);
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index cd4c9a204d08..e3142ce531a0 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -53,24 +53,28 @@ config RISCV
 	select ARCH_USE_MEMTEST
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USES_CFI_TRAPS if CFI_CLANG
+	select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH if SMP && MMU
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_GENERAL_HUGETLB if !RISCV_ISA_SVNAPOT
 	select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
 	select ARCH_WANT_LD_ORPHAN_WARN if !XIP_KERNEL
 	select ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
+	select ARCH_WANTS_NO_INSTR
 	select ARCH_WANTS_THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select BINFMT_FLAT_NO_DATA_START_OFFSET if !MMU
 	select BUILDTIME_TABLE_SORT if MMU
 	select CLINT_TIMER if !MMU
 	select CLONE_BACKWARDS
 	select COMMON_CLK
-	select CPU_PM if CPU_IDLE || HIBERNATION
+	select CPU_PM if CPU_IDLE || HIBERNATION || SUSPEND
 	select EDAC_SUPPORT
 	select FRAME_POINTER if PERF_EVENTS || (FUNCTION_TRACER && !DYNAMIC_FTRACE)
+	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY if DYNAMIC_FTRACE
 	select GENERIC_ARCH_TOPOLOGY
 	select GENERIC_ATOMIC64 if !64BIT
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_CPU_DEVICES
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_ENTRY
 	select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
@@ -113,6 +117,7 @@ config RISCV
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && MMU && (CLANG_SUPPORTS_DYNAMIC_FTRACE || GCC_SUPPORTS_DYNAMIC_FTRACE)
+	select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
 	select HAVE_FUNCTION_GRAPH_TRACER
@@ -140,6 +145,8 @@ config RISCV
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RETHOOK if !XIP_KERNEL
 	select HAVE_RSEQ
+	select HAVE_SAMPLE_FTRACE_DIRECT
+	select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
@@ -181,6 +188,20 @@ config HAVE_SHADOW_CALL_STACK
 	# https://github.com/riscv-non-isa/riscv-elf-psabi-doc/commit/a484e843e6eeb51f0cb7b8819e50da6d2444d769
 	depends on $(ld-option,--no-relax-gp)
 
+config RISCV_USE_LINKER_RELAXATION
+	def_bool y
+	# https://github.com/llvm/llvm-project/commit/6611d58f5bbcbec77262d392e2923e1d680f6985
+	depends on !LD_IS_LLD || LLD_VERSION >= 150000
+
+# https://github.com/llvm/llvm-project/commit/bbc0f99f3bc96f1db16f649fc21dd18e5b0918f6
+config ARCH_HAS_BROKEN_DWARF5
+	def_bool y
+	depends on RISCV_USE_LINKER_RELAXATION
+	# https://github.com/llvm/llvm-project/commit/1df5ea29b43690b6622db2cad7b745607ca4de6a
+	depends on AS_IS_LLVM && AS_VERSION < 180000
+	# https://github.com/llvm/llvm-project/commit/7ffabb61a5569444b5ac9322e22e5471cc5e4a77
+	depends on LD_IS_LLD && LLD_VERSION < 180000
+
 config ARCH_MMAP_RND_BITS_MIN
 	default 18 if 64BIT
 	default 8
@@ -294,7 +315,6 @@ config AS_HAS_OPTION_ARCH
 	# https://reviews.llvm.org/D123515
 	def_bool y
 	depends on $(as-instr, .option arch$(comma) +m)
-	depends on !$(as-instr, .option arch$(comma) -i)
 
 source "arch/riscv/Kconfig.socs"
 source "arch/riscv/Kconfig.errata"
@@ -414,7 +434,9 @@ config NUMA
 	depends on SMP && MMU
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select GENERIC_ARCH_NUMA
+	select HAVE_SETUP_PER_CPU_AREA
 	select NEED_PER_CPU_EMBED_FIRST_CHUNK
+	select NEED_PER_CPU_PAGE_FIRST_CHUNK
 	select OF_NUMA
 	select USE_PERCPU_NUMA_NODE_ID
 	help
@@ -525,6 +547,28 @@ config RISCV_ISA_V_DEFAULT_ENABLE
 
 	  If you don't know what to do here, say Y.
 
+config RISCV_ISA_V_UCOPY_THRESHOLD
+	int "Threshold size for vectorized user copies"
+	depends on RISCV_ISA_V
+	default 768
+	help
+	  Prefer using vectorized copy_to_user()/copy_from_user() when the
+	  workload size exceeds this value.
+
+config RISCV_ISA_V_PREEMPTIVE
+	bool "Run kernel-mode Vector with kernel preemption"
+	depends on PREEMPTION
+	depends on RISCV_ISA_V
+	default y
+	help
+	  Usually, in-kernel SIMD routines are run with preemption disabled.
+	  Functions which envoke long running SIMD thus must yield core's
+	  vector unit to prevent blocking other tasks for too long.
+
+	  This config allows kernel to run SIMD without explicitly disable
+	  preemption. Enabling this config will result in higher memory
+	  consumption due to the allocation of per-task's kernel Vector context.
+
 config TOOLCHAIN_HAS_ZBB
 	bool
 	default y
@@ -651,6 +695,20 @@ config RISCV_MISALIGNED
 	  load/store for both kernel and userspace. When disable, misaligned
 	  accesses will generate SIGBUS in userspace and panic in kernel.
 
+config RISCV_EFFICIENT_UNALIGNED_ACCESS
+	bool "Assume the CPU supports fast unaligned memory accesses"
+	depends on NONPORTABLE
+	select DCACHE_WORD_ACCESS if MMU
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
+	help
+	  Say Y here if you want the kernel to assume that the CPU supports
+	  efficient unaligned memory accesses.  When enabled, this option
+	  improves the performance of the kernel on such CPUs.  However, the
+	  kernel will run much more slowly, or will not be able to run at all,
+	  on CPUs that do not support efficient unaligned memory accesses.
+
+	  If unsure what to do here, say N.
+
 endmenu # "Platform type"
 
 menu "Kernel features"
@@ -722,6 +780,25 @@ config COMPAT
 
 	  If you want to execute 32-bit userspace applications, say Y.
 
+config PARAVIRT
+	bool "Enable paravirtualization code"
+	depends on RISCV_SBI
+	help
+	  This changes the kernel so it can modify itself when it is run
+	  under a hypervisor, potentially improving performance significantly
+	  over full virtualization.
+
+config PARAVIRT_TIME_ACCOUNTING
+	bool "Paravirtual steal time accounting"
+	depends on PARAVIRT
+	help
+	  Select this option to enable fine granularity task steal time
+	  accounting. Time spent executing other tasks in parallel with
+	  the current vCPU is discounted from the vCPU power. To account for
+	  that, there can be a small performance impact.
+
+	  If in doubt, say N here.
+
 config RELOCATABLE
 	bool "Build a relocatable kernel"
 	depends on MMU && 64BIT && !XIP_KERNEL
@@ -902,13 +979,13 @@ config RISCV_ISA_FALLBACK
 	  on the replacement properties, "riscv,isa-base" and
 	  "riscv,isa-extensions".
 
-endmenu # "Boot options"
-
 config BUILTIN_DTB
-	bool
+	bool "Built-in device tree"
 	depends on OF && NONPORTABLE
 	default y if XIP_KERNEL
 
+endmenu # "Boot options"
+
 config PORTABLE
 	bool
 	default !NONPORTABLE
diff --git a/arch/riscv/Kconfig.errata b/arch/riscv/Kconfig.errata
index e2c731cfed8c..910ba8837add 100644
--- a/arch/riscv/Kconfig.errata
+++ b/arch/riscv/Kconfig.errata
@@ -53,6 +53,25 @@ config ERRATA_SIFIVE_CIP_1200
 
 	  If you don't know what to do here, say "Y".
 
+config ERRATA_STARFIVE_JH7100
+	bool "StarFive JH7100 support"
+	depends on ARCH_STARFIVE
+	depends on !DMA_DIRECT_REMAP
+	depends on NONPORTABLE
+	select DMA_GLOBAL_POOL
+	select RISCV_DMA_NONCOHERENT
+	select RISCV_NONSTANDARD_CACHE_OPS
+	select SIFIVE_CCACHE
+	default n
+	help
+	  The StarFive JH7100 was a test chip for the JH7110 and has
+	  caches that are non-coherent with respect to peripheral DMAs.
+	  It was designed before the Zicbom extension so needs non-standard
+	  cache operations through the SiFive cache controller.
+
+	  Say "Y" if you want to support the BeagleV Starlight and/or
+	  StarFive VisionFive V1 boards.
+
 config ERRATA_THEAD
 	bool "T-HEAD errata"
 	depends on RISCV_ALTERNATIVE
@@ -79,6 +98,7 @@ config ERRATA_THEAD_CMO
 	depends on ERRATA_THEAD && MMU
 	select DMA_DIRECT_REMAP
 	select RISCV_DMA_NONCOHERENT
+	select RISCV_NONSTANDARD_CACHE_OPS
 	default y
 	help
 	  This will apply the cache management errata to handle the
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index a74be78678eb..0b7d109258e7 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -43,8 +43,7 @@ else
 	KBUILD_LDFLAGS += -melf32lriscv
 endif
 
-ifeq ($(CONFIG_LD_IS_LLD),y)
-ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 150000),y)
+ifndef CONFIG_RISCV_USE_LINKER_RELAXATION
 	KBUILD_CFLAGS += -mno-relax
 	KBUILD_AFLAGS += -mno-relax
 ifndef CONFIG_AS_IS_LLVM
@@ -52,7 +51,6 @@ ifndef CONFIG_AS_IS_LLVM
 	KBUILD_AFLAGS += -Wa,-mno-relax
 endif
 endif
-endif
 
 ifeq ($(CONFIG_SHADOW_CALL_STACK),y)
 	KBUILD_LDFLAGS += --no-relax-gp
@@ -108,7 +106,9 @@ KBUILD_AFLAGS_MODULE += $(call as-option,-Wa$(comma)-mno-relax)
 # unaligned accesses.  While unaligned accesses are explicitly allowed in the
 # RISC-V ISA, they're emulated by machine mode traps on all extant
 # architectures.  It's faster to have GCC emit only aligned accesses.
+ifneq ($(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS),y)
 KBUILD_CFLAGS += $(call cc-option,-mstrict-align)
+endif
 
 ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
 prepare: stack_protector_prepare
@@ -163,6 +163,8 @@ BOOT_TARGETS := Image Image.gz loader loader.bin xipImage vmlinuz.efi
 
 all:	$(notdir $(KBUILD_IMAGE))
 
+loader.bin: loader
+Image.gz loader vmlinuz.efi: Image
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 	@$(kecho) '  Kernel: $(boot)/$@ is ready'
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
index dce96f27cc89..222a39d90f85 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
@@ -192,6 +192,27 @@
 	status = "okay";
 };
 
+&syscontroller_qspi {
+	/*
+	 * The flash *is* there, but Icicle kits that have engineering sample
+	 * silicon (write?) access to this flash to non-functional. The system
+	 * controller itself can actually access it, but the MSS cannot write
+	 * an image there. Instantiating a coreQSPI in the fabric & connecting
+	 * it to the flash instead should work though. Pre-production or later
+	 * silicon does not have this issue.
+	 */
+	status = "disabled";
+
+	sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
 &usb {
 	status = "okay";
 	dr_mode = "host";
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 266489d43912..59fd2d4ea523 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -194,6 +194,12 @@
 		mboxes = <&mbox 0>;
 	};
 
+	scbclk: mssclkclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <80000000>;
+	};
+
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -524,5 +530,16 @@
 			#mbox-cells = <1>;
 			status = "disabled";
 		};
+
+		syscontroller_qspi: spi@37020100 {
+			compatible = "microchip,mpfs-qspi", "microchip,coreqspi-rtl-v2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x37020100 0x0 0x100>;
+			interrupt-parent = <&plic>;
+			interrupts = <110>;
+			clocks = <&scbclk>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
index b0796015e36b..a92cfcfc021b 100644
--- a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
+++ b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
@@ -24,6 +24,10 @@
 			reg = <0x0>;
 			status = "okay";
 			riscv,isa = "rv64imafdc";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "zicntr", "zicsr", "zifencei",
+					       "zihpm";
 			mmu-type = "riscv,sv39";
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <0x40>;
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index 07387f9c135c..72b87b08ab44 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -123,6 +123,7 @@
 		interrupt-parent = <&gpio>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/arch/riscv/boot/dts/sophgo/Makefile b/arch/riscv/boot/dts/sophgo/Makefile
index 3fb65512c631..57ad82a61ea6 100644
--- a/arch/riscv/boot/dts/sophgo/Makefile
+++ b/arch/riscv/boot/dts/sophgo/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_SOPHGO) += cv1800b-milkv-duo.dtb
+dtb-$(CONFIG_ARCH_SOPHGO) += cv1812h-huashan-pi.dtb
 dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-milkv-pioneer.dtb
diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
index aec6401a467b..165e9e320a8c 100644
--- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
@@ -3,120 +3,16 @@
  * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
  */
 
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "cv18xx.dtsi"
 
 / {
 	compatible = "sophgo,cv1800b";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		timebase-frequency = <25000000>;
-
-		cpu0: cpu@0 {
-			compatible = "thead,c906", "riscv";
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-block-size = <64>;
-			d-cache-sets = <512>;
-			d-cache-size = <65536>;
-			i-cache-block-size = <64>;
-			i-cache-sets = <128>;
-			i-cache-size = <32768>;
-			mmu-type = "riscv,sv39";
-			riscv,isa = "rv64imafdc";
-			riscv,isa-base = "rv64i";
-			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
-					       "zifencei", "zihpm";
-
-			cpu0_intc: interrupt-controller {
-				compatible = "riscv,cpu-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	osc: oscillator {
-		compatible = "fixed-clock";
-		clock-output-names = "osc_25m";
-		#clock-cells = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&plic>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		dma-noncoherent;
-		ranges;
-
-		uart0: serial@4140000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04140000 0x100>;
-			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart1: serial@4150000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04150000 0x100>;
-			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart2: serial@4160000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04160000 0x100>;
-			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart3: serial@4170000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04170000 0x100>;
-			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart4: serial@41c0000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x041c0000 0x100>;
-			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
+};
 
-		plic: interrupt-controller@70000000 {
-			compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
-			reg = <0x70000000 0x4000000>;
-			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			riscv,ndev = <101>;
-		};
+&plic {
+	compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
+};
 
-		clint: timer@74000000 {
-			compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
-			reg = <0x74000000 0x10000>;
-			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
-		};
-	};
+&clint {
+	compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
 };
diff --git a/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts b/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts
new file mode 100644
index 000000000000..aa361f3a86bb
--- /dev/null
+++ b/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "cv1812h.dtsi"
+
+/ {
+	model = "Huashan Pi";
+	compatible = "sophgo,huashan-pi", "sophgo,cv1812h";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		coprocessor_rtos: region@8fe00000 {
+			reg = <0x8fe00000 0x200000>;
+			no-map;
+		};
+	};
+};
+
+&osc {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/sophgo/cv1812h.dtsi b/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
new file mode 100644
index 000000000000..3e7a942f5c1a
--- /dev/null
+++ b/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "cv18xx.dtsi"
+
+/ {
+	compatible = "sophgo,cv1812h";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&plic {
+	compatible = "sophgo,cv1812h-plic", "thead,c900-plic";
+};
+
+&clint {
+	compatible = "sophgo,cv1812h-clint", "thead,c900-clint";
+};
diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
new file mode 100644
index 000000000000..2d6f4a4b1e58
--- /dev/null
+++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <25000000>;
+
+		cpu0: cpu@0 {
+			compatible = "thead,c906", "riscv";
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <512>;
+			d-cache-size = <65536>;
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			mmu-type = "riscv,sv39";
+			riscv,isa = "rv64imafdc";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
+					       "zifencei", "zihpm";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	osc: oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "osc_25m";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-noncoherent;
+		ranges;
+
+		gpio0: gpio@3020000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3020000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@3021000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3021000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio@3022000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3022000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio3: gpio@3023000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3023000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portd: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		uart0: serial@4140000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04140000 0x100>;
+			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@4150000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04150000 0x100>;
+			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@4160000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04160000 0x100>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@4170000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04170000 0x100>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart4: serial@41c0000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x041c0000 0x100>;
+			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		plic: interrupt-controller@70000000 {
+			reg = <0x70000000 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			riscv,ndev = <101>;
+		};
+
+		clint: timer@74000000 {
+			reg = <0x74000000 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
index 93256540d078..ead1cc35d88b 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi
+++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
@@ -93,144 +93,160 @@
 					      <&cpu63_intc 3>;
 		};
 
-		clint_mtimer0: timer@70ac000000 {
+		clint_mtimer0: timer@70ac004000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac000000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac004000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu0_intc 7>,
 					      <&cpu1_intc 7>,
 					      <&cpu2_intc 7>,
 					      <&cpu3_intc 7>;
 		};
 
-		clint_mtimer1: timer@70ac010000 {
+		clint_mtimer1: timer@70ac014000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac010000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac014000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu4_intc 7>,
 					      <&cpu5_intc 7>,
 					      <&cpu6_intc 7>,
 					      <&cpu7_intc 7>;
 		};
 
-		clint_mtimer2: timer@70ac020000 {
+		clint_mtimer2: timer@70ac024000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac020000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac024000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu8_intc 7>,
 					      <&cpu9_intc 7>,
 					      <&cpu10_intc 7>,
 					      <&cpu11_intc 7>;
 		};
 
-		clint_mtimer3: timer@70ac030000 {
+		clint_mtimer3: timer@70ac034000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac030000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac034000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu12_intc 7>,
 					      <&cpu13_intc 7>,
 					      <&cpu14_intc 7>,
 					      <&cpu15_intc 7>;
 		};
 
-		clint_mtimer4: timer@70ac040000 {
+		clint_mtimer4: timer@70ac044000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac040000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac044000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu16_intc 7>,
 					      <&cpu17_intc 7>,
 					      <&cpu18_intc 7>,
 					      <&cpu19_intc 7>;
 		};
 
-		clint_mtimer5: timer@70ac050000 {
+		clint_mtimer5: timer@70ac054000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac050000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac054000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu20_intc 7>,
 					      <&cpu21_intc 7>,
 					      <&cpu22_intc 7>,
 					      <&cpu23_intc 7>;
 		};
 
-		clint_mtimer6: timer@70ac060000 {
+		clint_mtimer6: timer@70ac064000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac060000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac064000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu24_intc 7>,
 					      <&cpu25_intc 7>,
 					      <&cpu26_intc 7>,
 					      <&cpu27_intc 7>;
 		};
 
-		clint_mtimer7: timer@70ac070000 {
+		clint_mtimer7: timer@70ac074000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac070000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac074000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu28_intc 7>,
 					      <&cpu29_intc 7>,
 					      <&cpu30_intc 7>,
 					      <&cpu31_intc 7>;
 		};
 
-		clint_mtimer8: timer@70ac080000 {
+		clint_mtimer8: timer@70ac084000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac080000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac084000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu32_intc 7>,
 					      <&cpu33_intc 7>,
 					      <&cpu34_intc 7>,
 					      <&cpu35_intc 7>;
 		};
 
-		clint_mtimer9: timer@70ac090000 {
+		clint_mtimer9: timer@70ac094000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac090000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac094000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu36_intc 7>,
 					      <&cpu37_intc 7>,
 					      <&cpu38_intc 7>,
 					      <&cpu39_intc 7>;
 		};
 
-		clint_mtimer10: timer@70ac0a0000 {
+		clint_mtimer10: timer@70ac0a4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0a0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0a4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu40_intc 7>,
 					      <&cpu41_intc 7>,
 					      <&cpu42_intc 7>,
 					      <&cpu43_intc 7>;
 		};
 
-		clint_mtimer11: timer@70ac0b0000 {
+		clint_mtimer11: timer@70ac0b4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0b0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0b4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu44_intc 7>,
 					      <&cpu45_intc 7>,
 					      <&cpu46_intc 7>,
 					      <&cpu47_intc 7>;
 		};
 
-		clint_mtimer12: timer@70ac0c0000 {
+		clint_mtimer12: timer@70ac0c4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0c0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0c4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu48_intc 7>,
 					      <&cpu49_intc 7>,
 					      <&cpu50_intc 7>,
 					      <&cpu51_intc 7>;
 		};
 
-		clint_mtimer13: timer@70ac0d0000 {
+		clint_mtimer13: timer@70ac0d4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0d0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0d4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu52_intc 7>,
 					      <&cpu53_intc 7>,
 					      <&cpu54_intc 7>,
 					      <&cpu55_intc 7>;
 		};
 
-		clint_mtimer14: timer@70ac0e0000 {
+		clint_mtimer14: timer@70ac0e4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0e0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0e4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu56_intc 7>,
 					      <&cpu57_intc 7>,
 					      <&cpu58_intc 7>,
 					      <&cpu59_intc 7>;
 		};
 
-		clint_mtimer15: timer@70ac0f0000 {
+		clint_mtimer15: timer@70ac0f4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0f0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0f4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu60_intc 7>,
 					      <&cpu61_intc 7>,
 					      <&cpu62_intc 7>,
diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
index b93ce351a90f..42fb61c36068 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
@@ -12,6 +12,8 @@
 
 / {
 	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdio1;
 		serial0 = &uart3;
 	};
 
@@ -39,6 +41,35 @@
 			label = "ack";
 		};
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dma-reserved@fa000000 {
+			reg = <0x0 0xfa000000 0x0 0x1000000>;
+			no-map;
+		};
+
+		linux,dma@107a000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10 0x7a000000 0x0 0x1000000>;
+			no-map;
+			linux,dma-default;
+		};
+	};
+
+	soc {
+		dma-ranges = <0x00 0x80000000 0x00 0x80000000 0x00 0x7a000000>,
+			     <0x00 0xfa000000 0x10 0x7a000000 0x00 0x01000000>,
+			     <0x00 0xfb000000 0x00 0xfb000000 0x07 0x85000000>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &gpio {
@@ -84,6 +115,78 @@
 		};
 	};
 
+	sdio0_pins: sdio0-0 {
+		clk-pins {
+			pinmux = <GPIOMUX(54, GPO_SDIO0_PAD_CCLK_OUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+		sdio-pins {
+			pinmux = <GPIOMUX(55, GPO_LOW, GPO_DISABLE,
+				  GPI_SDIO0_PAD_CARD_DETECT_N)>,
+				 <GPIOMUX(53,
+				  GPO_SDIO0_PAD_CCMD_OUT,
+				  GPO_SDIO0_PAD_CCMD_OEN,
+				  GPI_SDIO0_PAD_CCMD_IN)>,
+				 <GPIOMUX(49,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT0,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT0,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT0)>,
+				 <GPIOMUX(50,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT1,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT1,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT1)>,
+				 <GPIOMUX(51,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT2,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT2,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT2)>,
+				 <GPIOMUX(52,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT3,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT3,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT3)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	sdio1_pins: sdio1-0 {
+		clk-pins {
+			pinmux = <GPIOMUX(33, GPO_SDIO1_PAD_CCLK_OUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+		sdio-pins {
+			pinmux = <GPIOMUX(29,
+				  GPO_SDIO1_PAD_CCMD_OUT,
+				  GPO_SDIO1_PAD_CCMD_OEN,
+				  GPI_SDIO1_PAD_CCMD_IN)>,
+				 <GPIOMUX(36,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT0,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT0,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT0)>,
+				 <GPIOMUX(30,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT1,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT1,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT1)>,
+				 <GPIOMUX(34,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT2,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT2,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT2)>,
+				 <GPIOMUX(31,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT3,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT3,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT3)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
 	uart3_pins: uart3-0 {
 		rx-pins {
 			pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
@@ -154,6 +257,34 @@
 	clock-frequency = <27000000>;
 };
 
+&sdio0 {
+	broken-cd;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_pins>;
+	status = "okay";
+};
+
+&sdio1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	cap-power-off-card;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio1_pins>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
index e68cafe7545f..8bcf36d07f3f 100644
--- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
@@ -32,6 +32,7 @@
 			i-tlb-sets = <1>;
 			i-tlb-size = <32>;
 			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
 			riscv,isa = "rv64imafdc";
 			riscv,isa-base = "rv64i";
 			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
@@ -60,6 +61,7 @@
 			i-tlb-sets = <1>;
 			i-tlb-size = <32>;
 			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
 			riscv,isa = "rv64imafdc";
 			riscv,isa-base = "rv64i";
 			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
@@ -94,14 +96,14 @@
 			thermal-sensors = <&sfctemp>;
 
 			trips {
-				cpu_alert0 {
+				cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit {
+				cpu-crit {
 					/* milliCelsius */
 					temperature = <90000>;
 					hysteresis = <2000>;
@@ -111,28 +113,28 @@
 		};
 	};
 
-	osc_sys: osc_sys {
+	osc_sys: osc-sys {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
 	};
 
-	osc_aud: osc_aud {
+	osc_aud: osc-aud {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
 	};
 
-	gmac_rmii_ref: gmac_rmii_ref {
+	gmac_rmii_ref: gmac-rmii-ref {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* Should be overridden by the board when needed */
 		clock-frequency = <0>;
 	};
 
-	gmac_gr_mii_rxclk: gmac_gr_mii_rxclk {
+	gmac_gr_mii_rxclk: gmac-gr-mii-rxclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* Should be overridden by the board when needed */
@@ -144,26 +146,64 @@
 		interrupt-parent = <&plic>;
 		#address-cells = <2>;
 		#size-cells = <2>;
+		dma-noncoherent;
 		ranges;
 
 		clint: clint@2000000 {
 			compatible = "starfive,jh7100-clint", "sifive,clint0";
 			reg = <0x0 0x2000000 0x0 0x10000>;
-			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
-					       &cpu1_intc 3 &cpu1_intc 7>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>;
+		};
+
+		ccache: cache-controller@2010000 {
+			compatible = "starfive,jh7100-ccache", "sifive,ccache0", "cache";
+			reg = <0x0 0x2010000 0x0 0x1000>;
+			interrupts = <128>, <130>, <131>, <129>;
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <2097152>;
+			cache-unified;
 		};
 
 		plic: interrupt-controller@c000000 {
 			compatible = "starfive,jh7100-plic", "sifive,plic-1.0.0";
 			reg = <0x0 0xc000000 0x0 0x4000000>;
-			interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9
-					       &cpu1_intc 11 &cpu1_intc 9>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
 			riscv,ndev = <133>;
 		};
 
+		sdio0: mmc@10000000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x0 0x10000000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_SDIO0_AHB>,
+				 <&clkgen JH7100_CLK_SDIO0_CCLKINT_INV>;
+			clock-names = "biu", "ciu";
+			interrupts = <4>;
+			data-addr = <0>;
+			fifo-depth = <32>;
+			fifo-watermark-aligned;
+			status = "disabled";
+		};
+
+		sdio1: mmc@10010000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x0 0x10010000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_SDIO1_AHB>,
+				 <&clkgen JH7100_CLK_SDIO1_CCLKINT_INV>;
+			clock-names = "biu", "ciu";
+			interrupts = <5>;
+			data-addr = <0>;
+			fifo-depth = <32>;
+			fifo-watermark-aligned;
+			status = "disabled";
+		};
+
 		clkgen: clock-controller@11800000 {
 			compatible = "starfive,jh7100-clkgen";
 			reg = <0x0 0x11800000 0x0 0x10000>;
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 45213cdf50dc..74ed3b9264d8 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -237,14 +237,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit {
+				cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index 70e8042c8304..d9b4de9e4757 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -48,6 +48,10 @@
 	clock-frequency = <62500000>;
 };
 
+&sdhci_clk {
+	clock-frequency = <198000000>;
+};
+
 &uart_sclk {
 	clock-frequency = <100000000>;
 };
@@ -56,6 +60,22 @@
 	status = "okay";
 };
 
+&emmc {
+	bus-width = <8>;
+	max-frequency = <198000000>;
+	mmc-hs400-1_8v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	max-frequency = <198000000>;
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
index a802ab110429..1365d3a512a3 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
@@ -29,6 +29,10 @@
 	clock-frequency = <62500000>;
 };
 
+&sdhci_clk {
+	clock-frequency = <198000000>;
+};
+
 &uart_sclk {
 	clock-frequency = <100000000>;
 };
@@ -36,3 +40,19 @@
 &dmac0 {
 	status = "okay";
 };
+
+&emmc {
+	bus-width = <8>;
+	max-frequency = <198000000>;
+	mmc-hs400-1_8v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	max-frequency = <198000000>;
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index ba4d2c673ac8..8b915e206f3a 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -146,6 +146,13 @@
 		#clock-cells = <0>;
 	};
 
+	sdhci_clk: sdhci-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <198000000>;
+		clock-output-names = "sdhci_clk";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&plic>;
@@ -304,6 +311,33 @@
 			status = "disabled";
 		};
 
+		emmc: mmc@ffe7080000 {
+			compatible = "thead,th1520-dwcmshc";
+			reg = <0xff 0xe7080000 0x0 0x10000>;
+			interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sdhci_clk>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		sdio0: mmc@ffe7090000 {
+			compatible = "thead,th1520-dwcmshc";
+			reg = <0xff 0xe7090000 0x0 0x10000>;
+			interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sdhci_clk>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		sdio1: mmc@ffe70a0000 {
+			compatible = "thead,th1520-dwcmshc";
+			reg = <0xff 0xe70a0000 0x0 0x10000>;
+			interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sdhci_clk>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
 		timer0: timer@ffefc32000 {
 			compatible = "snps,dw-apb-timer";
 			reg = <0xff 0xefc32000 0x0 0x14>;
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 905881282a7c..eaf34e871e30 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -149,6 +149,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_VIRTIO=y
diff --git a/arch/riscv/configs/rv32_defconfig b/arch/riscv/configs/rv32_defconfig
deleted file mode 100644
index 89b601e253a6..000000000000
--- a/arch/riscv/configs/rv32_defconfig
+++ /dev/null
@@ -1,139 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BPF_SYSCALL=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_CFS_BANDWIDTH=y
-CONFIG_CGROUP_BPF=y
-CONFIG_NAMESPACES=y
-CONFIG_USER_NS=y
-CONFIG_CHECKPOINT_RESTORE=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_SYSFS_SYSCALL is not set
-CONFIG_PROFILING=y
-CONFIG_SOC_SIFIVE=y
-CONFIG_SOC_VIRT=y
-CONFIG_NONPORTABLE=y
-CONFIG_ARCH_RV32I=y
-CONFIG_SMP=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=m
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NETLINK_DIAG=y
-CONFIG_NET_9P=y
-CONFIG_NET_9P_VIRTIO=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCIE_XILINX=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_VIRTIO_NET=y
-CONFIG_MACB=y
-CONFIG_E1000E=y
-CONFIG_R8169=y
-CONFIG_MICROSEMI_PHY=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_SPI=y
-CONFIG_SPI_SIFIVE=y
-# CONFIG_PTP_1588_CLOCK is not set
-CONFIG_DRM=y
-CONFIG_DRM_RADEON=y
-CONFIG_DRM_VIRTIO_GPU=y
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_UAS=y
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_RTC_CLASS=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_INPUT=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_RPMSG_CHAR=y
-CONFIG_RPMSG_CTRL=y
-CONFIG_RPMSG_VIRTIO=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_AUTOFS_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_HUGETLBFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_NFS_V4_2=y
-CONFIG_ROOT_NFS=y
-CONFIG_9P_FS=y
-CONFIG_CRYPTO_USER_API_HASH=y
-CONFIG_CRYPTO_DEV_VIRTIO=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_PAGEALLOC=y
-CONFIG_SCHED_STACK_END_CHECK=y
-CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_VM_PGFLAGS=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DEBUG_PER_CPU_MAPS=y
-CONFIG_SOFTLOCKUP_DETECTOR=y
-CONFIG_WQ_WATCHDOG=y
-CONFIG_DEBUG_TIMEKEEPING=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_RWSEMS=y
-CONFIG_DEBUG_ATOMIC_SLEEP=y
-CONFIG_STACKTRACE=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_PLIST=y
-CONFIG_DEBUG_SG=y
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_EQS_DEBUG=y
-# CONFIG_FTRACE is not set
-# CONFIG_RUNTIME_TESTING_MENU is not set
-CONFIG_MEMTEST=y
diff --git a/arch/riscv/errata/thead/errata.c b/arch/riscv/errata/thead/errata.c
index 0554ed4bf087..b1c410bbc1ae 100644
--- a/arch/riscv/errata/thead/errata.c
+++ b/arch/riscv/errata/thead/errata.c
@@ -12,8 +12,10 @@
 #include <asm/alternative.h>
 #include <asm/cacheflush.h>
 #include <asm/cpufeature.h>
+#include <asm/dma-noncoherent.h>
 #include <asm/errata_list.h>
 #include <asm/hwprobe.h>
+#include <asm/io.h>
 #include <asm/patch.h>
 #include <asm/vendorid_list.h>
 
@@ -33,6 +35,69 @@ static bool errata_probe_pbmt(unsigned int stage,
 	return false;
 }
 
+/*
+ * th.dcache.ipa rs1 (invalidate, physical address)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000001    01010      rs1       000      00000  0001011
+ * th.dcache.iva rs1 (invalidate, virtual address)
+ *   0000001    00110      rs1       000      00000  0001011
+ *
+ * th.dcache.cpa rs1 (clean, physical address)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000001    01001      rs1       000      00000  0001011
+ * th.dcache.cva rs1 (clean, virtual address)
+ *   0000001    00101      rs1       000      00000  0001011
+ *
+ * th.dcache.cipa rs1 (clean then invalidate, physical address)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000001    01011      rs1       000      00000  0001011
+ * th.dcache.civa rs1 (clean then invalidate, virtual address)
+ *   0000001    00111      rs1       000      00000  0001011
+ *
+ * th.sync.s (make sure all cache operations finished)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000000    11001     00000      000      00000  0001011
+ */
+#define THEAD_INVAL_A0	".long 0x02a5000b"
+#define THEAD_CLEAN_A0	".long 0x0295000b"
+#define THEAD_FLUSH_A0	".long 0x02b5000b"
+#define THEAD_SYNC_S	".long 0x0190000b"
+
+#define THEAD_CMO_OP(_op, _start, _size, _cachesize)			\
+asm volatile("mv a0, %1\n\t"						\
+	     "j 2f\n\t"							\
+	     "3:\n\t"							\
+	     THEAD_##_op##_A0 "\n\t"					\
+	     "add a0, a0, %0\n\t"					\
+	     "2:\n\t"							\
+	     "bltu a0, %2, 3b\n\t"					\
+	     THEAD_SYNC_S						\
+	     : : "r"(_cachesize),					\
+		 "r"((unsigned long)(_start) & ~((_cachesize) - 1UL)),	\
+		 "r"((unsigned long)(_start) + (_size))			\
+	     : "a0")
+
+static void thead_errata_cache_inv(phys_addr_t paddr, size_t size)
+{
+	THEAD_CMO_OP(INVAL, paddr, size, riscv_cbom_block_size);
+}
+
+static void thead_errata_cache_wback(phys_addr_t paddr, size_t size)
+{
+	THEAD_CMO_OP(CLEAN, paddr, size, riscv_cbom_block_size);
+}
+
+static void thead_errata_cache_wback_inv(phys_addr_t paddr, size_t size)
+{
+	THEAD_CMO_OP(FLUSH, paddr, size, riscv_cbom_block_size);
+}
+
+static const struct riscv_nonstd_cache_ops thead_errata_cmo_ops = {
+	.wback = &thead_errata_cache_wback,
+	.inv = &thead_errata_cache_inv,
+	.wback_inv = &thead_errata_cache_wback_inv,
+};
+
 static bool errata_probe_cmo(unsigned int stage,
 			     unsigned long arch_id, unsigned long impid)
 {
@@ -48,6 +113,7 @@ static bool errata_probe_cmo(unsigned int stage,
 	if (stage == RISCV_ALTERNATIVES_BOOT) {
 		riscv_cbom_block_size = L1_CACHE_BYTES;
 		riscv_noncoherent_supported();
+		riscv_noncoherent_register_cache_ops(&thead_errata_cmo_ops);
 	}
 
 	return true;
@@ -77,8 +143,7 @@ static u32 thead_errata_probe(unsigned int stage,
 	if (errata_probe_pbmt(stage, archid, impid))
 		cpu_req_errata |= BIT(ERRATA_THEAD_PBMT);
 
-	if (errata_probe_cmo(stage, archid, impid))
-		cpu_req_errata |= BIT(ERRATA_THEAD_CMO);
+	errata_probe_cmo(stage, archid, impid);
 
 	if (errata_probe_pmu(stage, archid, impid))
 		cpu_req_errata |= BIT(ERRATA_THEAD_PMU);
diff --git a/arch/riscv/include/asm/arch_hweight.h b/arch/riscv/include/asm/arch_hweight.h
new file mode 100644
index 000000000000..85b2c443823e
--- /dev/null
+++ b/arch/riscv/include/asm/arch_hweight.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Based on arch/x86/include/asm/arch_hweight.h
+ */
+
+#ifndef _ASM_RISCV_HWEIGHT_H
+#define _ASM_RISCV_HWEIGHT_H
+
+#include <asm/alternative-macros.h>
+#include <asm/hwcap.h>
+
+#if (BITS_PER_LONG == 64)
+#define CPOPW	"cpopw "
+#elif (BITS_PER_LONG == 32)
+#define CPOPW	"cpop "
+#else
+#error "Unexpected BITS_PER_LONG"
+#endif
+
+static __always_inline unsigned int __arch_hweight32(unsigned int w)
+{
+#ifdef CONFIG_RISCV_ISA_ZBB
+	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
+				      RISCV_ISA_EXT_ZBB, 1)
+			  : : : : legacy);
+
+	asm (".option push\n"
+	     ".option arch,+zbb\n"
+	     CPOPW "%0, %0\n"
+	     ".option pop\n"
+	     : "+r" (w) : :);
+
+	return w;
+
+legacy:
+#endif
+	return __sw_hweight32(w);
+}
+
+static inline unsigned int __arch_hweight16(unsigned int w)
+{
+	return __arch_hweight32(w & 0xffff);
+}
+
+static inline unsigned int __arch_hweight8(unsigned int w)
+{
+	return __arch_hweight32(w & 0xff);
+}
+
+#if BITS_PER_LONG == 64
+static __always_inline unsigned long __arch_hweight64(__u64 w)
+{
+# ifdef CONFIG_RISCV_ISA_ZBB
+	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
+				      RISCV_ISA_EXT_ZBB, 1)
+			  : : : : legacy);
+
+	asm (".option push\n"
+	     ".option arch,+zbb\n"
+	     "cpop %0, %0\n"
+	     ".option pop\n"
+	     : "+r" (w) : :);
+
+	return w;
+
+legacy:
+# endif
+	return __sw_hweight64(w);
+}
+#else /* BITS_PER_LONG == 64 */
+static inline unsigned long __arch_hweight64(__u64 w)
+{
+	return  __arch_hweight32((u32)w) +
+		__arch_hweight32((u32)(w >> 32));
+}
+#endif /* !(BITS_PER_LONG == 64) */
+
+#endif /* _ASM_RISCV_HWEIGHT_H */
diff --git a/arch/riscv/include/asm/archrandom.h b/arch/riscv/include/asm/archrandom.h
new file mode 100644
index 000000000000..5345360adfb9
--- /dev/null
+++ b/arch/riscv/include/asm/archrandom.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Kernel interface for the RISCV arch_random_* functions
+ *
+ * Copyright (c) 2023 Rivos Inc.
+ *
+ */
+
+#ifndef ASM_RISCV_ARCHRANDOM_H
+#define ASM_RISCV_ARCHRANDOM_H
+
+#include <asm/csr.h>
+#include <asm/processor.h>
+
+#define SEED_RETRY_LOOPS 100
+
+static inline bool __must_check csr_seed_long(unsigned long *v)
+{
+	unsigned int retry = SEED_RETRY_LOOPS, valid_seeds = 0;
+	const int needed_seeds = sizeof(long) / sizeof(u16);
+	u16 *entropy = (u16 *)v;
+
+	do {
+		/*
+		 * The SEED CSR must be accessed with a read-write instruction.
+		 */
+		unsigned long csr_seed = csr_swap(CSR_SEED, 0);
+		unsigned long opst = csr_seed & SEED_OPST_MASK;
+
+		switch (opst) {
+		case SEED_OPST_ES16:
+			entropy[valid_seeds++] = csr_seed & SEED_ENTROPY_MASK;
+			if (valid_seeds == needed_seeds)
+				return true;
+			break;
+
+		case SEED_OPST_DEAD:
+			pr_err_once("archrandom: Unrecoverable error\n");
+			return false;
+
+		case SEED_OPST_BIST:
+		case SEED_OPST_WAIT:
+		default:
+			cpu_relax();
+			continue;
+		}
+	} while (--retry);
+
+	return false;
+}
+
+static inline size_t __must_check arch_get_random_longs(unsigned long *v, size_t max_longs)
+{
+	return 0;
+}
+
+static inline size_t __must_check arch_get_random_seed_longs(unsigned long *v, size_t max_longs)
+{
+	if (!max_longs)
+		return 0;
+
+	/*
+	 * If Zkr is supported and csr_seed_long succeeds, we return one long
+	 * worth of entropy.
+	 */
+	if (riscv_has_extension_likely(RISCV_ISA_EXT_ZKR) && csr_seed_long(v))
+		return 1;
+
+	return 0;
+}
+
+#endif /* ASM_RISCV_ARCHRANDOM_H */
diff --git a/arch/riscv/include/asm/asm-extable.h b/arch/riscv/include/asm/asm-extable.h
index 00a96e7a9664..0c8bfd54fc4e 100644
--- a/arch/riscv/include/asm/asm-extable.h
+++ b/arch/riscv/include/asm/asm-extable.h
@@ -6,6 +6,7 @@
 #define EX_TYPE_FIXUP			1
 #define EX_TYPE_BPF			2
 #define EX_TYPE_UACCESS_ERR_ZERO	3
+#define EX_TYPE_LOAD_UNALIGNED_ZEROPAD	4
 
 #ifdef CONFIG_MMU
 
@@ -47,6 +48,11 @@
 #define EX_DATA_REG_ZERO_SHIFT	5
 #define EX_DATA_REG_ZERO	GENMASK(9, 5)
 
+#define EX_DATA_REG_DATA_SHIFT	0
+#define EX_DATA_REG_DATA	GENMASK(4, 0)
+#define EX_DATA_REG_ADDR_SHIFT	5
+#define EX_DATA_REG_ADDR	GENMASK(9, 5)
+
 #define EX_DATA_REG(reg, gpr)						\
 	"((.L__gpr_num_" #gpr ") << " __stringify(EX_DATA_REG_##reg##_SHIFT) ")"
 
@@ -62,6 +68,15 @@
 #define _ASM_EXTABLE_UACCESS_ERR(insn, fixup, err)			\
 	_ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, zero)
 
+#define _ASM_EXTABLE_LOAD_UNALIGNED_ZEROPAD(insn, fixup, data, addr)		\
+	__DEFINE_ASM_GPR_NUMS							\
+	__ASM_EXTABLE_RAW(#insn, #fixup,					\
+			  __stringify(EX_TYPE_LOAD_UNALIGNED_ZEROPAD),		\
+			  "("							\
+			    EX_DATA_REG(DATA, data) " | "			\
+			    EX_DATA_REG(ADDR, addr)				\
+			  ")")
+
 #endif /* __ASSEMBLY__ */
 
 #else /* CONFIG_MMU */
diff --git a/arch/riscv/include/asm/asm-prototypes.h b/arch/riscv/include/asm/asm-prototypes.h
index 36b955c762ba..cd627ec289f1 100644
--- a/arch/riscv/include/asm/asm-prototypes.h
+++ b/arch/riscv/include/asm/asm-prototypes.h
@@ -9,6 +9,33 @@ long long __lshrti3(long long a, int b);
 long long __ashrti3(long long a, int b);
 long long __ashlti3(long long a, int b);
 
+#ifdef CONFIG_RISCV_ISA_V
+
+#ifdef CONFIG_MMU
+asmlinkage int enter_vector_usercopy(void *dst, void *src, size_t n);
+#endif /* CONFIG_MMU  */
+
+void xor_regs_2_(unsigned long bytes, unsigned long *__restrict p1,
+		 const unsigned long *__restrict p2);
+void xor_regs_3_(unsigned long bytes, unsigned long *__restrict p1,
+		 const unsigned long *__restrict p2,
+		 const unsigned long *__restrict p3);
+void xor_regs_4_(unsigned long bytes, unsigned long *__restrict p1,
+		 const unsigned long *__restrict p2,
+		 const unsigned long *__restrict p3,
+		 const unsigned long *__restrict p4);
+void xor_regs_5_(unsigned long bytes, unsigned long *__restrict p1,
+		 const unsigned long *__restrict p2,
+		 const unsigned long *__restrict p3,
+		 const unsigned long *__restrict p4,
+		 const unsigned long *__restrict p5);
+
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+asmlinkage void riscv_v_context_nesting_start(struct pt_regs *regs);
+asmlinkage void riscv_v_context_nesting_end(struct pt_regs *regs);
+#endif /* CONFIG_RISCV_ISA_V_PREEMPTIVE */
+
+#endif /* CONFIG_RISCV_ISA_V */
 
 #define DECLARE_DO_ERROR_INFO(name)	asmlinkage void name(struct pt_regs *regs)
 
diff --git a/arch/riscv/include/asm/bitops.h b/arch/riscv/include/asm/bitops.h
index 224b4dc02b50..329d8244a9b3 100644
--- a/arch/riscv/include/asm/bitops.h
+++ b/arch/riscv/include/asm/bitops.h
@@ -39,7 +39,7 @@ static __always_inline unsigned long variable__ffs(unsigned long word)
 {
 	int num;
 
-	asm_volatile_goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
+	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
 				      RISCV_ISA_EXT_ZBB, 1)
 			  : : : : legacy);
 
@@ -95,7 +95,7 @@ static __always_inline unsigned long variable__fls(unsigned long word)
 {
 	int num;
 
-	asm_volatile_goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
+	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
 				      RISCV_ISA_EXT_ZBB, 1)
 			  : : : : legacy);
 
@@ -154,7 +154,7 @@ static __always_inline int variable_ffs(int x)
 	if (!x)
 		return 0;
 
-	asm_volatile_goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
+	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
 				      RISCV_ISA_EXT_ZBB, 1)
 			  : : : : legacy);
 
@@ -209,7 +209,7 @@ static __always_inline int variable_fls(unsigned int x)
 	if (!x)
 		return 0;
 
-	asm_volatile_goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
+	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
 				      RISCV_ISA_EXT_ZBB, 1)
 			  : : : : legacy);
 
@@ -271,7 +271,9 @@ legacy:
 #include <asm-generic/bitops/fls64.h>
 #include <asm-generic/bitops/sched.h>
 
-#include <asm-generic/bitops/hweight.h>
+#include <asm/arch_hweight.h>
+
+#include <asm-generic/bitops/const_hweight.h>
 
 #if (BITS_PER_LONG == 64)
 #define __AMO(op)	"amo" #op ".d"
diff --git a/arch/riscv/include/asm/cacheflush.h b/arch/riscv/include/asm/cacheflush.h
index 3cb53c4df27c..a129dac4521d 100644
--- a/arch/riscv/include/asm/cacheflush.h
+++ b/arch/riscv/include/asm/cacheflush.h
@@ -37,7 +37,8 @@ static inline void flush_dcache_page(struct page *page)
 	flush_icache_mm(vma->vm_mm, 0)
 
 #ifdef CONFIG_64BIT
-#define flush_cache_vmap(start, end)	flush_tlb_kernel_range(start, end)
+#define flush_cache_vmap(start, end)		flush_tlb_kernel_range(start, end)
+#define flush_cache_vmap_early(start, end)	local_flush_tlb_kernel_range(start, end)
 #endif
 
 #ifndef CONFIG_SMP
diff --git a/arch/riscv/include/asm/cfi.h b/arch/riscv/include/asm/cfi.h
index 56bf9d69d5e3..8f7a62257044 100644
--- a/arch/riscv/include/asm/cfi.h
+++ b/arch/riscv/include/asm/cfi.h
@@ -7,8 +7,9 @@
  *
  * Copyright (C) 2023 Google LLC
  */
+#include <linux/bug.h>
 
-#include <linux/cfi.h>
+struct pt_regs;
 
 #ifdef CONFIG_CFI_CLANG
 enum bug_trap_type handle_cfi_failure(struct pt_regs *regs);
diff --git a/arch/riscv/include/asm/checksum.h b/arch/riscv/include/asm/checksum.h
new file mode 100644
index 000000000000..88e6f1499e88
--- /dev/null
+++ b/arch/riscv/include/asm/checksum.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Checksum routines
+ *
+ * Copyright (C) 2023 Rivos Inc.
+ */
+#ifndef __ASM_RISCV_CHECKSUM_H
+#define __ASM_RISCV_CHECKSUM_H
+
+#include <linux/in6.h>
+#include <linux/uaccess.h>
+
+#define ip_fast_csum ip_fast_csum
+
+extern unsigned int do_csum(const unsigned char *buff, int len);
+#define do_csum do_csum
+
+/* Default version is sufficient for 32 bit */
+#ifndef CONFIG_32BIT
+#define _HAVE_ARCH_IPV6_CSUM
+__sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+			const struct in6_addr *daddr,
+			__u32 len, __u8 proto, __wsum sum);
+#endif
+
+/* Define riscv versions of functions before importing asm-generic/checksum.h */
+#include <asm-generic/checksum.h>
+
+/**
+ * Quickly compute an IP checksum with the assumption that IPv4 headers will
+ * always be in multiples of 32-bits, and have an ihl of at least 5.
+ *
+ * @ihl: the number of 32 bit segments and must be greater than or equal to 5.
+ * @iph: assumed to be word aligned given that NET_IP_ALIGN is set to 2 on
+ *  riscv, defining IP headers to be aligned.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned long csum = 0;
+	int pos = 0;
+
+	do {
+		csum += ((const unsigned int *)iph)[pos];
+		if (IS_ENABLED(CONFIG_32BIT))
+			csum += csum < ((const unsigned int *)iph)[pos];
+	} while (++pos < ihl);
+
+	/*
+	 * ZBB only saves three instructions on 32-bit and five on 64-bit so not
+	 * worth checking if supported without Alternatives.
+	 */
+	if (IS_ENABLED(CONFIG_RISCV_ISA_ZBB) &&
+	    IS_ENABLED(CONFIG_RISCV_ALTERNATIVE)) {
+		unsigned long fold_temp;
+
+		asm goto(ALTERNATIVE("j %l[no_zbb]", "nop", 0,
+					      RISCV_ISA_EXT_ZBB, 1)
+		    :
+		    :
+		    :
+		    : no_zbb);
+
+		if (IS_ENABLED(CONFIG_32BIT)) {
+			asm(".option push				\n\
+			.option arch,+zbb				\n\
+				not	%[fold_temp], %[csum]		\n\
+				rori	%[csum], %[csum], 16		\n\
+				sub	%[csum], %[fold_temp], %[csum]	\n\
+			.option pop"
+			: [csum] "+r" (csum), [fold_temp] "=&r" (fold_temp));
+		} else {
+			asm(".option push				\n\
+			.option arch,+zbb				\n\
+				rori	%[fold_temp], %[csum], 32	\n\
+				add	%[csum], %[fold_temp], %[csum]	\n\
+				srli	%[csum], %[csum], 32		\n\
+				not	%[fold_temp], %[csum]		\n\
+				roriw	%[csum], %[csum], 16		\n\
+				subw	%[csum], %[fold_temp], %[csum]	\n\
+			.option pop"
+			: [csum] "+r" (csum), [fold_temp] "=&r" (fold_temp));
+		}
+		return (__force __sum16)(csum >> 16);
+	}
+no_zbb:
+#ifndef CONFIG_32BIT
+	csum += ror64(csum, 32);
+	csum >>= 32;
+#endif
+	return csum_fold((__force __wsum)csum);
+}
+
+#endif /* __ASM_RISCV_CHECKSUM_H */
diff --git a/arch/riscv/include/asm/cpu_ops.h b/arch/riscv/include/asm/cpu_ops.h
index aa128466c4d4..176b570ef982 100644
--- a/arch/riscv/include/asm/cpu_ops.h
+++ b/arch/riscv/include/asm/cpu_ops.h
@@ -13,33 +13,23 @@
 /**
  * struct cpu_operations - Callback operations for hotplugging CPUs.
  *
- * @name:		Name of the boot protocol.
- * @cpu_prepare:	Early one-time preparation step for a cpu. If there
- *			is a mechanism for doing so, tests whether it is
- *			possible to boot the given HART.
  * @cpu_start:		Boots a cpu into the kernel.
- * @cpu_disable:	Prepares a cpu to die. May fail for some
- *			mechanism-specific reason, which will cause the hot
- *			unplug to be aborted. Called from the cpu to be killed.
  * @cpu_stop:		Makes a cpu leave the kernel. Must not fail. Called from
  *			the cpu being stopped.
  * @cpu_is_stopped:	Ensures a cpu has left the kernel. Called from another
  *			cpu.
  */
 struct cpu_operations {
-	const char	*name;
-	int		(*cpu_prepare)(unsigned int cpu);
 	int		(*cpu_start)(unsigned int cpu,
 				     struct task_struct *tidle);
 #ifdef CONFIG_HOTPLUG_CPU
-	int		(*cpu_disable)(unsigned int cpu);
 	void		(*cpu_stop)(void);
 	int		(*cpu_is_stopped)(unsigned int cpu);
 #endif
 };
 
 extern const struct cpu_operations cpu_ops_spinwait;
-extern const struct cpu_operations *cpu_ops[NR_CPUS];
-void __init cpu_set_ops(int cpu);
+extern const struct cpu_operations *cpu_ops;
+void __init cpu_set_ops(void);
 
 #endif /* ifndef __ASM_CPU_OPS_H */
diff --git a/arch/riscv/include/asm/cpufeature.h b/arch/riscv/include/asm/cpufeature.h
index a418c3112cd6..0bd11862b760 100644
--- a/arch/riscv/include/asm/cpufeature.h
+++ b/arch/riscv/include/asm/cpufeature.h
@@ -59,6 +59,8 @@ struct riscv_isa_ext_data {
 	const unsigned int id;
 	const char *name;
 	const char *property;
+	const unsigned int *subset_ext_ids;
+	const unsigned int subset_ext_size;
 };
 
 extern const struct riscv_isa_ext_data riscv_isa_ext[];
@@ -67,7 +69,7 @@ extern bool riscv_isa_fallback;
 
 unsigned long riscv_isa_extension_base(const unsigned long *isa_bitmap);
 
-bool __riscv_isa_extension_available(const unsigned long *isa_bitmap, int bit);
+bool __riscv_isa_extension_available(const unsigned long *isa_bitmap, unsigned int bit);
 #define riscv_isa_extension_available(isa_bitmap, ext)	\
 	__riscv_isa_extension_available(isa_bitmap, RISCV_ISA_EXT_##ext)
 
@@ -78,7 +80,7 @@ riscv_has_extension_likely(const unsigned long ext)
 			   "ext must be < RISCV_ISA_EXT_MAX");
 
 	if (IS_ENABLED(CONFIG_RISCV_ALTERNATIVE)) {
-		asm_volatile_goto(
+		asm goto(
 		ALTERNATIVE("j	%l[l_no]", "nop", 0, %[ext], 1)
 		:
 		: [ext] "i" (ext)
@@ -101,7 +103,7 @@ riscv_has_extension_unlikely(const unsigned long ext)
 			   "ext must be < RISCV_ISA_EXT_MAX");
 
 	if (IS_ENABLED(CONFIG_RISCV_ALTERNATIVE)) {
-		asm_volatile_goto(
+		asm goto(
 		ALTERNATIVE("nop", "j	%l[l_yes]", 0, %[ext], 1)
 		:
 		: [ext] "i" (ext)
@@ -133,4 +135,6 @@ static __always_inline bool riscv_cpu_has_extension_unlikely(int cpu, const unsi
 	return __riscv_isa_extension_available(hart_isa[cpu].isa, ext);
 }
 
+DECLARE_STATIC_KEY_FALSE(fast_misaligned_access_speed_key);
+
 #endif
diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
index 306a19a5509c..2468c55933cd 100644
--- a/arch/riscv/include/asm/csr.h
+++ b/arch/riscv/include/asm/csr.h
@@ -411,10 +411,20 @@
 #define CSR_VTYPE		0xc21
 #define CSR_VLENB		0xc22
 
+/* Scalar Crypto Extension - Entropy */
+#define CSR_SEED		0x015
+#define SEED_OPST_MASK		_AC(0xC0000000, UL)
+#define SEED_OPST_BIST		_AC(0x00000000, UL)
+#define SEED_OPST_WAIT		_AC(0x40000000, UL)
+#define SEED_OPST_ES16		_AC(0x80000000, UL)
+#define SEED_OPST_DEAD		_AC(0xC0000000, UL)
+#define SEED_ENTROPY_MASK	_AC(0xFFFF, UL)
+
 #ifdef CONFIG_RISCV_M_MODE
 # define CSR_STATUS	CSR_MSTATUS
 # define CSR_IE		CSR_MIE
 # define CSR_TVEC	CSR_MTVEC
+# define CSR_ENVCFG	CSR_MENVCFG
 # define CSR_SCRATCH	CSR_MSCRATCH
 # define CSR_EPC	CSR_MEPC
 # define CSR_CAUSE	CSR_MCAUSE
@@ -439,6 +449,7 @@
 # define CSR_STATUS	CSR_SSTATUS
 # define CSR_IE		CSR_SIE
 # define CSR_TVEC	CSR_STVEC
+# define CSR_ENVCFG	CSR_SENVCFG
 # define CSR_SCRATCH	CSR_SSCRATCH
 # define CSR_EPC	CSR_SEPC
 # define CSR_CAUSE	CSR_SCAUSE
diff --git a/arch/riscv/include/asm/entry-common.h b/arch/riscv/include/asm/entry-common.h
index 7ab5e34318c8..2293e535f865 100644
--- a/arch/riscv/include/asm/entry-common.h
+++ b/arch/riscv/include/asm/entry-common.h
@@ -4,6 +4,23 @@
 #define _ASM_RISCV_ENTRY_COMMON_H
 
 #include <asm/stacktrace.h>
+#include <asm/thread_info.h>
+#include <asm/vector.h>
+
+static inline void arch_exit_to_user_mode_prepare(struct pt_regs *regs,
+						  unsigned long ti_work)
+{
+	if (ti_work & _TIF_RISCV_V_DEFER_RESTORE) {
+		clear_thread_flag(TIF_RISCV_V_DEFER_RESTORE);
+		/*
+		 * We are already called with irq disabled, so go without
+		 * keeping track of riscv_v_flags.
+		 */
+		riscv_v_vstate_restore(&current->thread.vstate, regs);
+	}
+}
+
+#define arch_exit_to_user_mode_prepare arch_exit_to_user_mode_prepare
 
 void handle_page_fault(struct pt_regs *regs);
 void handle_break(struct pt_regs *regs);
diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h
index 83ed25e43553..ea33288f8a25 100644
--- a/arch/riscv/include/asm/errata_list.h
+++ b/arch/riscv/include/asm/errata_list.h
@@ -24,9 +24,8 @@
 
 #ifdef CONFIG_ERRATA_THEAD
 #define	ERRATA_THEAD_PBMT 0
-#define	ERRATA_THEAD_CMO 1
-#define	ERRATA_THEAD_PMU 2
-#define	ERRATA_THEAD_NUMBER 3
+#define	ERRATA_THEAD_PMU 1
+#define	ERRATA_THEAD_NUMBER 2
 #endif
 
 #ifdef __ASSEMBLY__
@@ -94,54 +93,17 @@ asm volatile(ALTERNATIVE(						\
 #define ALT_THEAD_PMA(_val)
 #endif
 
-/*
- * th.dcache.ipa rs1 (invalidate, physical address)
- * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
- *   0000001    01010      rs1       000      00000  0001011
- * th.dache.iva rs1 (invalida, virtual address)
- *   0000001    00110      rs1       000      00000  0001011
- *
- * th.dcache.cpa rs1 (clean, physical address)
- * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
- *   0000001    01001      rs1       000      00000  0001011
- * th.dcache.cva rs1 (clean, virtual address)
- *   0000001    00101      rs1       000      00000  0001011
- *
- * th.dcache.cipa rs1 (clean then invalidate, physical address)
- * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
- *   0000001    01011      rs1       000      00000  0001011
- * th.dcache.civa rs1 (... virtual address)
- *   0000001    00111      rs1       000      00000  0001011
- *
- * th.sync.s (make sure all cache operations finished)
- * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
- *   0000000    11001     00000      000      00000  0001011
- */
-#define THEAD_INVAL_A0	".long 0x0265000b"
-#define THEAD_CLEAN_A0	".long 0x0255000b"
-#define THEAD_FLUSH_A0	".long 0x0275000b"
-#define THEAD_SYNC_S	".long 0x0190000b"
-
 #define ALT_CMO_OP(_op, _start, _size, _cachesize)			\
-asm volatile(ALTERNATIVE_2(						\
-	__nops(6),							\
+asm volatile(ALTERNATIVE(						\
+	__nops(5),							\
 	"mv a0, %1\n\t"							\
 	"j 2f\n\t"							\
 	"3:\n\t"							\
 	CBO_##_op(a0)							\
 	"add a0, a0, %0\n\t"						\
 	"2:\n\t"							\
-	"bltu a0, %2, 3b\n\t"						\
-	"nop", 0, RISCV_ISA_EXT_ZICBOM, CONFIG_RISCV_ISA_ZICBOM,	\
-	"mv a0, %1\n\t"							\
-	"j 2f\n\t"							\
-	"3:\n\t"							\
-	THEAD_##_op##_A0 "\n\t"						\
-	"add a0, a0, %0\n\t"						\
-	"2:\n\t"							\
-	"bltu a0, %2, 3b\n\t"						\
-	THEAD_SYNC_S, THEAD_VENDOR_ID,					\
-			ERRATA_THEAD_CMO, CONFIG_ERRATA_THEAD_CMO)	\
+	"bltu a0, %2, 3b\n\t",						\
+	0, RISCV_ISA_EXT_ZICBOM, CONFIG_RISCV_ISA_ZICBOM)		\
 	: : "r"(_cachesize),						\
 	    "r"((unsigned long)(_start) & ~((_cachesize) - 1UL)),	\
 	    "r"((unsigned long)(_start) + (_size))			\
diff --git a/arch/riscv/include/asm/ftrace.h b/arch/riscv/include/asm/ftrace.h
index 2b2f5df7ef2c..15055f9df4da 100644
--- a/arch/riscv/include/asm/ftrace.h
+++ b/arch/riscv/include/asm/ftrace.h
@@ -25,6 +25,11 @@
 
 #define ARCH_SUPPORTS_FTRACE_OPS 1
 #ifndef __ASSEMBLY__
+
+extern void *return_address(unsigned int level);
+
+#define ftrace_return_address(n) return_address(n)
+
 void MCOUNT_NAME(void);
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
 {
@@ -128,7 +133,23 @@ do {									\
 struct dyn_ftrace;
 int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec);
 #define ftrace_init_nop ftrace_init_nop
-#endif
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+struct ftrace_ops;
+struct ftrace_regs;
+void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
+		       struct ftrace_ops *op, struct ftrace_regs *fregs);
+#define ftrace_graph_func ftrace_graph_func
+
+static inline void __arch_ftrace_set_direct_caller(struct pt_regs *regs, unsigned long addr)
+{
+		regs->t1 = addr;
+}
+#define arch_ftrace_set_direct_caller(fregs, addr) \
+	__arch_ftrace_set_direct_caller(&(fregs)->regs, addr)
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
+
+#endif /* __ASSEMBLY__ */
 
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
diff --git a/arch/riscv/include/asm/hugetlb.h b/arch/riscv/include/asm/hugetlb.h
index 4c5b0e929890..22deb7a2a6ec 100644
--- a/arch/riscv/include/asm/hugetlb.h
+++ b/arch/riscv/include/asm/hugetlb.h
@@ -11,6 +11,11 @@ static inline void arch_clear_hugepage_flags(struct page *page)
 }
 #define arch_clear_hugepage_flags arch_clear_hugepage_flags
 
+#ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
+bool arch_hugetlb_migration_supported(struct hstate *h);
+#define arch_hugetlb_migration_supported arch_hugetlb_migration_supported
+#endif
+
 #ifdef CONFIG_RISCV_ISA_SVNAPOT
 #define __HAVE_ARCH_HUGE_PTE_CLEAR
 void huge_pte_clear(struct mm_struct *mm, unsigned long addr,
diff --git a/arch/riscv/include/asm/hwcap.h b/arch/riscv/include/asm/hwcap.h
index 06d30526ef3b..1f2d2599c655 100644
--- a/arch/riscv/include/asm/hwcap.h
+++ b/arch/riscv/include/asm/hwcap.h
@@ -11,19 +11,13 @@
 #include <uapi/asm/hwcap.h>
 
 #define RISCV_ISA_EXT_a		('a' - 'a')
-#define RISCV_ISA_EXT_b		('b' - 'a')
 #define RISCV_ISA_EXT_c		('c' - 'a')
 #define RISCV_ISA_EXT_d		('d' - 'a')
 #define RISCV_ISA_EXT_f		('f' - 'a')
 #define RISCV_ISA_EXT_h		('h' - 'a')
 #define RISCV_ISA_EXT_i		('i' - 'a')
-#define RISCV_ISA_EXT_j		('j' - 'a')
-#define RISCV_ISA_EXT_k		('k' - 'a')
 #define RISCV_ISA_EXT_m		('m' - 'a')
-#define RISCV_ISA_EXT_p		('p' - 'a')
 #define RISCV_ISA_EXT_q		('q' - 'a')
-#define RISCV_ISA_EXT_s		('s' - 'a')
-#define RISCV_ISA_EXT_u		('u' - 'a')
 #define RISCV_ISA_EXT_v		('v' - 'a')
 
 /*
@@ -57,8 +51,40 @@
 #define RISCV_ISA_EXT_ZIHPM		42
 #define RISCV_ISA_EXT_SMSTATEEN		43
 #define RISCV_ISA_EXT_ZICOND		44
+#define RISCV_ISA_EXT_ZBC		45
+#define RISCV_ISA_EXT_ZBKB		46
+#define RISCV_ISA_EXT_ZBKC		47
+#define RISCV_ISA_EXT_ZBKX		48
+#define RISCV_ISA_EXT_ZKND		49
+#define RISCV_ISA_EXT_ZKNE		50
+#define RISCV_ISA_EXT_ZKNH		51
+#define RISCV_ISA_EXT_ZKR		52
+#define RISCV_ISA_EXT_ZKSED		53
+#define RISCV_ISA_EXT_ZKSH		54
+#define RISCV_ISA_EXT_ZKT		55
+#define RISCV_ISA_EXT_ZVBB		56
+#define RISCV_ISA_EXT_ZVBC		57
+#define RISCV_ISA_EXT_ZVKB		58
+#define RISCV_ISA_EXT_ZVKG		59
+#define RISCV_ISA_EXT_ZVKNED		60
+#define RISCV_ISA_EXT_ZVKNHA		61
+#define RISCV_ISA_EXT_ZVKNHB		62
+#define RISCV_ISA_EXT_ZVKSED		63
+#define RISCV_ISA_EXT_ZVKSH		64
+#define RISCV_ISA_EXT_ZVKT		65
+#define RISCV_ISA_EXT_ZFH		66
+#define RISCV_ISA_EXT_ZFHMIN		67
+#define RISCV_ISA_EXT_ZIHINTNTL		68
+#define RISCV_ISA_EXT_ZVFH		69
+#define RISCV_ISA_EXT_ZVFHMIN		70
+#define RISCV_ISA_EXT_ZFA		71
+#define RISCV_ISA_EXT_ZTSO		72
+#define RISCV_ISA_EXT_ZACAS		73
 
-#define RISCV_ISA_EXT_MAX		64
+#define RISCV_ISA_EXT_XLINUXENVCFG	127
+
+#define RISCV_ISA_EXT_MAX		128
+#define RISCV_ISA_EXT_INVALID		U32_MAX
 
 #ifdef CONFIG_RISCV_M_MODE
 #define RISCV_ISA_EXT_SxAIA		RISCV_ISA_EXT_SMAIA
diff --git a/arch/riscv/include/asm/hwprobe.h b/arch/riscv/include/asm/hwprobe.h
index 5c48f48e79a6..630507dff5ea 100644
--- a/arch/riscv/include/asm/hwprobe.h
+++ b/arch/riscv/include/asm/hwprobe.h
@@ -15,4 +15,28 @@ static inline bool riscv_hwprobe_key_is_valid(__s64 key)
 	return key >= 0 && key <= RISCV_HWPROBE_MAX_KEY;
 }
 
+static inline bool hwprobe_key_is_bitmask(__s64 key)
+{
+	switch (key) {
+	case RISCV_HWPROBE_KEY_BASE_BEHAVIOR:
+	case RISCV_HWPROBE_KEY_IMA_EXT_0:
+	case RISCV_HWPROBE_KEY_CPUPERF_0:
+		return true;
+	}
+
+	return false;
+}
+
+static inline bool riscv_hwprobe_pair_cmp(struct riscv_hwprobe *pair,
+					  struct riscv_hwprobe *other_pair)
+{
+	if (pair->key != other_pair->key)
+		return false;
+
+	if (hwprobe_key_is_bitmask(pair->key))
+		return (pair->value & other_pair->value) == other_pair->value;
+
+	return pair->value == other_pair->value;
+}
+
 #endif
diff --git a/arch/riscv/include/asm/irq_work.h b/arch/riscv/include/asm/irq_work.h
index b53891964ae0..b27a4d64fc6a 100644
--- a/arch/riscv/include/asm/irq_work.h
+++ b/arch/riscv/include/asm/irq_work.h
@@ -6,5 +6,5 @@ static inline bool arch_irq_work_has_interrupt(void)
 {
 	return IS_ENABLED(CONFIG_SMP);
 }
-extern void arch_irq_work_raise(void);
+
 #endif /* _ASM_RISCV_IRQ_WORK_H */
diff --git a/arch/riscv/include/asm/jump_label.h b/arch/riscv/include/asm/jump_label.h
index 14a5ea8d8ef0..4a35d787c019 100644
--- a/arch/riscv/include/asm/jump_label.h
+++ b/arch/riscv/include/asm/jump_label.h
@@ -17,7 +17,7 @@
 static __always_inline bool arch_static_branch(struct static_key * const key,
 					       const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"	.align		2			\n\t"
 		"	.option push				\n\t"
 		"	.option norelax				\n\t"
@@ -39,7 +39,7 @@ label:
 static __always_inline bool arch_static_branch_jump(struct static_key * const key,
 						    const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"	.align		2			\n\t"
 		"	.option push				\n\t"
 		"	.option norelax				\n\t"
diff --git a/arch/riscv/include/asm/kfence.h b/arch/riscv/include/asm/kfence.h
index 0bbffd528096..7388edd88986 100644
--- a/arch/riscv/include/asm/kfence.h
+++ b/arch/riscv/include/asm/kfence.h
@@ -18,9 +18,9 @@ static inline bool kfence_protect_page(unsigned long addr, bool protect)
 	pte_t *pte = virt_to_kpte(addr);
 
 	if (protect)
-		set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT));
+		set_pte(pte, __pte(pte_val(ptep_get(pte)) & ~_PAGE_PRESENT));
 	else
-		set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT));
+		set_pte(pte, __pte(pte_val(ptep_get(pte)) | _PAGE_PRESENT));
 
 	flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
 
diff --git a/arch/riscv/include/asm/kvm_host.h b/arch/riscv/include/asm/kvm_host.h
index 0eefd9c991ae..484d04a92fa6 100644
--- a/arch/riscv/include/asm/kvm_host.h
+++ b/arch/riscv/include/asm/kvm_host.h
@@ -41,6 +41,7 @@
 	KVM_ARCH_REQ_FLAGS(4, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
 #define KVM_REQ_HFENCE			\
 	KVM_ARCH_REQ_FLAGS(5, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
+#define KVM_REQ_STEAL_UPDATE		KVM_ARCH_REQ(6)
 
 enum kvm_riscv_hfence_type {
 	KVM_RISCV_HFENCE_UNKNOWN = 0,
@@ -262,13 +263,17 @@ struct kvm_vcpu_arch {
 
 	/* 'static' configurations which are set only once */
 	struct kvm_vcpu_config cfg;
+
+	/* SBI steal-time accounting */
+	struct {
+		gpa_t shmem;
+		u64 last_steal;
+	} sta;
 };
 
 static inline void kvm_arch_sync_events(struct kvm *kvm) {}
 static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
 
-#define KVM_ARCH_WANT_MMU_NOTIFIER
-
 #define KVM_RISCV_GSTAGE_TLB_MIN_ORDER		12
 
 void kvm_riscv_local_hfence_gvma_vmid_gpa(unsigned long vmid,
@@ -372,4 +377,7 @@ bool kvm_riscv_vcpu_has_interrupts(struct kvm_vcpu *vcpu, u64 mask);
 void kvm_riscv_vcpu_power_off(struct kvm_vcpu *vcpu);
 void kvm_riscv_vcpu_power_on(struct kvm_vcpu *vcpu);
 
+void kvm_riscv_vcpu_sbi_sta_reset(struct kvm_vcpu *vcpu);
+void kvm_riscv_vcpu_record_steal_time(struct kvm_vcpu *vcpu);
+
 #endif /* __RISCV_KVM_HOST_H__ */
diff --git a/arch/riscv/include/asm/kvm_vcpu_sbi.h b/arch/riscv/include/asm/kvm_vcpu_sbi.h
index 6a453f7f8b56..b96705258cf9 100644
--- a/arch/riscv/include/asm/kvm_vcpu_sbi.h
+++ b/arch/riscv/include/asm/kvm_vcpu_sbi.h
@@ -15,9 +15,10 @@
 #define KVM_SBI_VERSION_MINOR 0
 
 enum kvm_riscv_sbi_ext_status {
-	KVM_RISCV_SBI_EXT_UNINITIALIZED,
-	KVM_RISCV_SBI_EXT_AVAILABLE,
-	KVM_RISCV_SBI_EXT_UNAVAILABLE,
+	KVM_RISCV_SBI_EXT_STATUS_UNINITIALIZED,
+	KVM_RISCV_SBI_EXT_STATUS_UNAVAILABLE,
+	KVM_RISCV_SBI_EXT_STATUS_ENABLED,
+	KVM_RISCV_SBI_EXT_STATUS_DISABLED,
 };
 
 struct kvm_vcpu_sbi_context {
@@ -36,7 +37,7 @@ struct kvm_vcpu_sbi_extension {
 	unsigned long extid_start;
 	unsigned long extid_end;
 
-	bool default_unavail;
+	bool default_disabled;
 
 	/**
 	 * SBI extension handler. It can be defined for a given extension or group of
@@ -59,11 +60,21 @@ int kvm_riscv_vcpu_set_reg_sbi_ext(struct kvm_vcpu *vcpu,
 				   const struct kvm_one_reg *reg);
 int kvm_riscv_vcpu_get_reg_sbi_ext(struct kvm_vcpu *vcpu,
 				   const struct kvm_one_reg *reg);
+int kvm_riscv_vcpu_set_reg_sbi(struct kvm_vcpu *vcpu,
+			       const struct kvm_one_reg *reg);
+int kvm_riscv_vcpu_get_reg_sbi(struct kvm_vcpu *vcpu,
+			       const struct kvm_one_reg *reg);
 const struct kvm_vcpu_sbi_extension *kvm_vcpu_sbi_find_ext(
 				struct kvm_vcpu *vcpu, unsigned long extid);
+bool riscv_vcpu_supports_sbi_ext(struct kvm_vcpu *vcpu, int idx);
 int kvm_riscv_vcpu_sbi_ecall(struct kvm_vcpu *vcpu, struct kvm_run *run);
 void kvm_riscv_vcpu_sbi_init(struct kvm_vcpu *vcpu);
 
+int kvm_riscv_vcpu_get_reg_sbi_sta(struct kvm_vcpu *vcpu, unsigned long reg_num,
+				   unsigned long *reg_val);
+int kvm_riscv_vcpu_set_reg_sbi_sta(struct kvm_vcpu *vcpu, unsigned long reg_num,
+				   unsigned long reg_val);
+
 #ifdef CONFIG_RISCV_SBI_V01
 extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_v01;
 #endif
@@ -74,6 +85,7 @@ extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_rfence;
 extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_srst;
 extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_hsm;
 extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_dbcn;
+extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_sta;
 extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_experimental;
 extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_vendor;
 
diff --git a/arch/riscv/include/asm/paravirt.h b/arch/riscv/include/asm/paravirt.h
new file mode 100644
index 000000000000..c0abde70fc2c
--- /dev/null
+++ b/arch/riscv/include/asm/paravirt.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_RISCV_PARAVIRT_H
+#define _ASM_RISCV_PARAVIRT_H
+
+#ifdef CONFIG_PARAVIRT
+#include <linux/static_call_types.h>
+
+struct static_key;
+extern struct static_key paravirt_steal_enabled;
+extern struct static_key paravirt_steal_rq_enabled;
+
+u64 dummy_steal_clock(int cpu);
+
+DECLARE_STATIC_CALL(pv_steal_clock, dummy_steal_clock);
+
+static inline u64 paravirt_steal_clock(int cpu)
+{
+	return static_call(pv_steal_clock)(cpu);
+}
+
+int __init pv_time_init(void);
+
+#else
+
+#define pv_time_init() do {} while (0)
+
+#endif /* CONFIG_PARAVIRT */
+#endif /* _ASM_RISCV_PARAVIRT_H */
diff --git a/arch/riscv/include/asm/paravirt_api_clock.h b/arch/riscv/include/asm/paravirt_api_clock.h
new file mode 100644
index 000000000000..65ac7cee0dad
--- /dev/null
+++ b/arch/riscv/include/asm/paravirt_api_clock.h
@@ -0,0 +1 @@
+#include <asm/paravirt.h>
diff --git a/arch/riscv/include/asm/pgalloc.h b/arch/riscv/include/asm/pgalloc.h
index d169a4f41a2e..c80bb9990d32 100644
--- a/arch/riscv/include/asm/pgalloc.h
+++ b/arch/riscv/include/asm/pgalloc.h
@@ -95,7 +95,13 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 		__pud_free(mm, pud);
 }
 
-#define __pud_free_tlb(tlb, pud, addr)  pud_free((tlb)->mm, pud)
+#define __pud_free_tlb(tlb, pud, addr)					\
+do {									\
+	if (pgtable_l4_enabled) {					\
+		pagetable_pud_dtor(virt_to_ptdesc(pud));		\
+		tlb_remove_page_ptdesc((tlb), virt_to_ptdesc(pud));	\
+	}								\
+} while (0)
 
 #define p4d_alloc_one p4d_alloc_one
 static inline p4d_t *p4d_alloc_one(struct mm_struct *mm, unsigned long addr)
@@ -124,7 +130,11 @@ static inline void p4d_free(struct mm_struct *mm, p4d_t *p4d)
 		__p4d_free(mm, p4d);
 }
 
-#define __p4d_free_tlb(tlb, p4d, addr)  p4d_free((tlb)->mm, p4d)
+#define __p4d_free_tlb(tlb, p4d, addr)					\
+do {									\
+	if (pgtable_l5_enabled)						\
+		tlb_remove_page_ptdesc((tlb), virt_to_ptdesc(p4d));	\
+} while (0)
 #endif /* __PAGETABLE_PMD_FOLDED */
 
 static inline void sync_kernel_mappings(pgd_t *pgd)
@@ -149,7 +159,11 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 
 #ifndef __PAGETABLE_PMD_FOLDED
 
-#define __pmd_free_tlb(tlb, pmd, addr)  pmd_free((tlb)->mm, pmd)
+#define __pmd_free_tlb(tlb, pmd, addr)				\
+do {								\
+	pagetable_pmd_dtor(virt_to_ptdesc(pmd));		\
+	tlb_remove_page_ptdesc((tlb), virt_to_ptdesc(pmd));	\
+} while (0)
 
 #endif /* __PAGETABLE_PMD_FOLDED */
 
diff --git a/arch/riscv/include/asm/pgtable-64.h b/arch/riscv/include/asm/pgtable-64.h
index 9a2c780a11e9..b99bd66107a6 100644
--- a/arch/riscv/include/asm/pgtable-64.h
+++ b/arch/riscv/include/asm/pgtable-64.h
@@ -136,7 +136,7 @@ enum napot_cont_order {
  * 10010 - IO   Strongly-ordered, Non-cacheable, Non-bufferable, Shareable, Non-trustable
  */
 #define _PAGE_PMA_THEAD		((1UL << 62) | (1UL << 61) | (1UL << 60))
-#define _PAGE_NOCACHE_THEAD	((1UL < 61) | (1UL << 60))
+#define _PAGE_NOCACHE_THEAD	((1UL << 61) | (1UL << 60))
 #define _PAGE_IO_THEAD		((1UL << 63) | (1UL << 60))
 #define _PAGE_MTMASK_THEAD	(_PAGE_PMA_THEAD | _PAGE_IO_THEAD | (1UL << 59))
 
@@ -202,7 +202,7 @@ static inline int pud_user(pud_t pud)
 
 static inline void set_pud(pud_t *pudp, pud_t pud)
 {
-	*pudp = pud;
+	WRITE_ONCE(*pudp, pud);
 }
 
 static inline void pud_clear(pud_t *pudp)
@@ -278,7 +278,7 @@ static inline unsigned long _pmd_pfn(pmd_t pmd)
 static inline void set_p4d(p4d_t *p4dp, p4d_t p4d)
 {
 	if (pgtable_l4_enabled)
-		*p4dp = p4d;
+		WRITE_ONCE(*p4dp, p4d);
 	else
 		set_pud((pud_t *)p4dp, (pud_t){ p4d_val(p4d) });
 }
@@ -340,18 +340,12 @@ static inline struct page *p4d_page(p4d_t p4d)
 #define pud_index(addr) (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
 
 #define pud_offset pud_offset
-static inline pud_t *pud_offset(p4d_t *p4d, unsigned long address)
-{
-	if (pgtable_l4_enabled)
-		return p4d_pgtable(*p4d) + pud_index(address);
-
-	return (pud_t *)p4d;
-}
+pud_t *pud_offset(p4d_t *p4d, unsigned long address);
 
 static inline void set_pgd(pgd_t *pgdp, pgd_t pgd)
 {
 	if (pgtable_l5_enabled)
-		*pgdp = pgd;
+		WRITE_ONCE(*pgdp, pgd);
 	else
 		set_p4d((p4d_t *)pgdp, (p4d_t){ pgd_val(pgd) });
 }
@@ -404,12 +398,6 @@ static inline struct page *pgd_page(pgd_t pgd)
 #define p4d_index(addr) (((addr) >> P4D_SHIFT) & (PTRS_PER_P4D - 1))
 
 #define p4d_offset p4d_offset
-static inline p4d_t *p4d_offset(pgd_t *pgd, unsigned long address)
-{
-	if (pgtable_l5_enabled)
-		return pgd_pgtable(*pgd) + p4d_index(address);
-
-	return (p4d_t *)pgd;
-}
+p4d_t *p4d_offset(pgd_t *pgd, unsigned long address);
 
 #endif /* _ASM_RISCV_PGTABLE_64_H */
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index ab00235b018f..6066822e7396 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -84,7 +84,7 @@
  * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if kernel
  * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
  */
-#define vmemmap		((struct page *)VMEMMAP_START)
+#define vmemmap		((struct page *)VMEMMAP_START - (phys_ram_base >> PAGE_SHIFT))
 
 #define PCI_IO_SIZE      SZ_16M
 #define PCI_IO_END       VMEMMAP_START
@@ -248,7 +248,7 @@ static inline int pmd_leaf(pmd_t pmd)
 
 static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
 {
-	*pmdp = pmd;
+	WRITE_ONCE(*pmdp, pmd);
 }
 
 static inline void pmd_clear(pmd_t *pmdp)
@@ -439,6 +439,10 @@ static inline pte_t pte_mkhuge(pte_t pte)
 	return pte;
 }
 
+#define pte_leaf_size(pte)	(pte_napot(pte) ?				\
+					napot_cont_size(napot_cont_order(pte)) :\
+					PAGE_SIZE)
+
 #ifdef CONFIG_NUMA_BALANCING
 /*
  * See the comment in include/asm-generic/pgtable.h
@@ -510,7 +514,7 @@ static inline int pte_same(pte_t pte_a, pte_t pte_b)
  */
 static inline void set_pte(pte_t *ptep, pte_t pteval)
 {
-	*ptep = pteval;
+	WRITE_ONCE(*ptep, pteval);
 }
 
 void flush_icache_pte(pte_t pte);
@@ -544,19 +548,12 @@ static inline void pte_clear(struct mm_struct *mm,
 	__set_pte_at(ptep, __pte(0));
 }
 
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-static inline int ptep_set_access_flags(struct vm_area_struct *vma,
-					unsigned long address, pte_t *ptep,
-					pte_t entry, int dirty)
-{
-	if (!pte_same(*ptep, entry))
-		__set_pte_at(ptep, entry);
-	/*
-	 * update_mmu_cache will unconditionally execute, handling both
-	 * the case that the PTE changed and the spurious fault case.
-	 */
-	return true;
-}
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS	/* defined in mm/pgtable.c */
+extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
+				 pte_t *ptep, pte_t entry, int dirty);
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG	/* defined in mm/pgtable.c */
+extern int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long address,
+				     pte_t *ptep);
 
 #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
 static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
@@ -569,16 +566,6 @@ static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
 	return pte;
 }
 
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
-					    unsigned long address,
-					    pte_t *ptep)
-{
-	if (!pte_young(*ptep))
-		return 0;
-	return test_and_clear_bit(_PAGE_ACCESSED_OFFSET, &pte_val(*ptep));
-}
-
 #define __HAVE_ARCH_PTEP_SET_WRPROTECT
 static inline void ptep_set_wrprotect(struct mm_struct *mm,
 				      unsigned long address, pte_t *ptep)
@@ -673,6 +660,7 @@ static inline int pmd_write(pmd_t pmd)
 	return pte_write(pmd_pte(pmd));
 }
 
+#define pmd_dirty pmd_dirty
 static inline int pmd_dirty(pmd_t pmd)
 {
 	return pte_dirty(pmd_pte(pmd));
@@ -881,7 +869,7 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
 #define TASK_SIZE_MIN	(PGDIR_SIZE_L3 * PTRS_PER_PGD / 2)
 
 #ifdef CONFIG_COMPAT
-#define TASK_SIZE_32	(_AC(0x80000000, UL) - PAGE_SIZE)
+#define TASK_SIZE_32	(_AC(0x80000000, UL))
 #define TASK_SIZE	(test_thread_flag(TIF_32BIT) ? \
 			 TASK_SIZE_32 : TASK_SIZE_64)
 #else
diff --git a/arch/riscv/include/asm/processor.h b/arch/riscv/include/asm/processor.h
index f19f861cda54..a8509cc31ab2 100644
--- a/arch/riscv/include/asm/processor.h
+++ b/arch/riscv/include/asm/processor.h
@@ -16,7 +16,7 @@
 
 #ifdef CONFIG_64BIT
 #define DEFAULT_MAP_WINDOW	(UL(1) << (MMAP_VA_BITS - 1))
-#define STACK_TOP_MAX		TASK_SIZE_64
+#define STACK_TOP_MAX		TASK_SIZE
 
 #define arch_get_mmap_end(addr, len, flags)			\
 ({								\
@@ -73,6 +73,43 @@
 struct task_struct;
 struct pt_regs;
 
+/*
+ * We use a flag to track in-kernel Vector context. Currently the flag has the
+ * following meaning:
+ *
+ *  - bit 0: indicates whether the in-kernel Vector context is active. The
+ *    activation of this state disables the preemption. On a non-RT kernel, it
+ *    also disable bh.
+ *  - bits 8: is used for tracking preemptible kernel-mode Vector, when
+ *    RISCV_ISA_V_PREEMPTIVE is enabled. Calling kernel_vector_begin() does not
+ *    disable the preemption if the thread's kernel_vstate.datap is allocated.
+ *    Instead, the kernel set this bit field. Then the trap entry/exit code
+ *    knows if we are entering/exiting the context that owns preempt_v.
+ *     - 0: the task is not using preempt_v
+ *     - 1: the task is actively using preempt_v. But whether does the task own
+ *          the preempt_v context is decided by bits in RISCV_V_CTX_DEPTH_MASK.
+ *  - bit 16-23 are RISCV_V_CTX_DEPTH_MASK, used by context tracking routine
+ *     when preempt_v starts:
+ *     - 0: the task is actively using, and own preempt_v context.
+ *     - non-zero: the task was using preempt_v, but then took a trap within.
+ *       Thus, the task does not own preempt_v. Any use of Vector will have to
+ *       save preempt_v, if dirty, and fallback to non-preemptible kernel-mode
+ *       Vector.
+ *  - bit 30: The in-kernel preempt_v context is saved, and requries to be
+ *    restored when returning to the context that owns the preempt_v.
+ *  - bit 31: The in-kernel preempt_v context is dirty, as signaled by the
+ *    trap entry code. Any context switches out-of current task need to save
+ *    it to the task's in-kernel V context. Also, any traps nesting on-top-of
+ *    preempt_v requesting to use V needs a save.
+ */
+#define RISCV_V_CTX_DEPTH_MASK		0x00ff0000
+
+#define RISCV_V_CTX_UNIT_DEPTH		0x00010000
+#define RISCV_KERNEL_MODE_V		0x00000001
+#define RISCV_PREEMPT_V			0x00000100
+#define RISCV_PREEMPT_V_DIRTY		0x80000000
+#define RISCV_PREEMPT_V_NEED_RESTORE	0x40000000
+
 /* CPU-specific state of a task */
 struct thread_struct {
 	/* Callee-saved registers */
@@ -81,9 +118,11 @@ struct thread_struct {
 	unsigned long s[12];	/* s[0]: frame pointer */
 	struct __riscv_d_ext_state fstate;
 	unsigned long bad_cause;
-	unsigned long vstate_ctrl;
+	u32 riscv_v_flags;
+	u32 vstate_ctrl;
 	struct __riscv_v_ext_state vstate;
 	unsigned long align_ctl;
+	struct __riscv_v_ext_state kernel_vstate;
 };
 
 /* Whitelist the fstate from the task_struct for hardened usercopy */
diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 0892f4421bc4..6e68f8dff76b 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -29,8 +29,10 @@ enum sbi_ext_id {
 	SBI_EXT_RFENCE = 0x52464E43,
 	SBI_EXT_HSM = 0x48534D,
 	SBI_EXT_SRST = 0x53525354,
+	SBI_EXT_SUSP = 0x53555350,
 	SBI_EXT_PMU = 0x504D55,
 	SBI_EXT_DBCN = 0x4442434E,
+	SBI_EXT_STA = 0x535441,
 
 	/* Experimentals extensions must lie within this range */
 	SBI_EXT_EXPERIMENTAL_START = 0x08000000,
@@ -114,6 +116,14 @@ enum sbi_srst_reset_reason {
 	SBI_SRST_RESET_REASON_SYS_FAILURE,
 };
 
+enum sbi_ext_susp_fid {
+	SBI_EXT_SUSP_SYSTEM_SUSPEND = 0,
+};
+
+enum sbi_ext_susp_sleep_type {
+	SBI_SUSP_SLEEP_TYPE_SUSPEND_TO_RAM = 0,
+};
+
 enum sbi_ext_pmu_fid {
 	SBI_EXT_PMU_NUM_COUNTERS = 0,
 	SBI_EXT_PMU_COUNTER_GET_INFO,
@@ -243,6 +253,22 @@ enum sbi_ext_dbcn_fid {
 	SBI_EXT_DBCN_CONSOLE_WRITE_BYTE = 2,
 };
 
+/* SBI STA (steal-time accounting) extension */
+enum sbi_ext_sta_fid {
+	SBI_EXT_STA_STEAL_TIME_SET_SHMEM = 0,
+};
+
+struct sbi_sta_struct {
+	__le32 sequence;
+	__le32 flags;
+	__le64 steal;
+	u8 preempted;
+	u8 pad[47];
+} __packed;
+
+#define SBI_STA_SHMEM_DISABLE		-1
+
+/* SBI spec version fields */
 #define SBI_SPEC_VERSION_DEFAULT	0x1
 #define SBI_SPEC_VERSION_MAJOR_SHIFT	24
 #define SBI_SPEC_VERSION_MAJOR_MASK	0x7f
@@ -271,8 +297,13 @@ struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
 			unsigned long arg3, unsigned long arg4,
 			unsigned long arg5);
 
+#ifdef CONFIG_RISCV_SBI_V01
 void sbi_console_putchar(int ch);
 int sbi_console_getchar(void);
+#else
+static inline void sbi_console_putchar(int ch) { }
+static inline int sbi_console_getchar(void) { return -ENOENT; }
+#endif
 long sbi_get_mvendorid(void);
 long sbi_get_marchid(void);
 long sbi_get_mimpid(void);
@@ -329,6 +360,11 @@ static inline unsigned long sbi_mk_version(unsigned long major,
 }
 
 int sbi_err_map_linux_errno(int err);
+
+extern bool sbi_debug_console_available;
+int sbi_debug_console_write(const char *bytes, unsigned int num_bytes);
+int sbi_debug_console_read(char *bytes, unsigned int num_bytes);
+
 #else /* CONFIG_RISCV_SBI */
 static inline int sbi_remote_fence_i(const struct cpumask *cpu_mask) { return -1; }
 static inline void sbi_init(void) {}
diff --git a/arch/riscv/include/asm/sections.h b/arch/riscv/include/asm/sections.h
index 32336e8a17cb..a393d5035c54 100644
--- a/arch/riscv/include/asm/sections.h
+++ b/arch/riscv/include/asm/sections.h
@@ -13,6 +13,7 @@ extern char _start_kernel[];
 extern char __init_data_begin[], __init_data_end[];
 extern char __init_text_begin[], __init_text_end[];
 extern char __alt_start[], __alt_end[];
+extern char __exittext_begin[], __exittext_end[];
 
 static inline bool is_va_kernel_text(uintptr_t va)
 {
diff --git a/arch/riscv/include/asm/simd.h b/arch/riscv/include/asm/simd.h
new file mode 100644
index 000000000000..54efbf523d49
--- /dev/null
+++ b/arch/riscv/include/asm/simd.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2017 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ * Copyright (C) 2023 SiFive
+ */
+
+#ifndef __ASM_SIMD_H
+#define __ASM_SIMD_H
+
+#include <linux/compiler.h>
+#include <linux/irqflags.h>
+#include <linux/percpu.h>
+#include <linux/preempt.h>
+#include <linux/types.h>
+#include <linux/thread_info.h>
+
+#include <asm/vector.h>
+
+#ifdef CONFIG_RISCV_ISA_V
+/*
+ * may_use_simd - whether it is allowable at this time to issue vector
+ *                instructions or access the vector register file
+ *
+ * Callers must not assume that the result remains true beyond the next
+ * preempt_enable() or return from softirq context.
+ */
+static __must_check inline bool may_use_simd(void)
+{
+	/*
+	 * RISCV_KERNEL_MODE_V is only set while preemption is disabled,
+	 * and is clear whenever preemption is enabled.
+	 */
+	if (in_hardirq() || in_nmi())
+		return false;
+
+	/*
+	 * Nesting is acheived in preempt_v by spreading the control for
+	 * preemptible and non-preemptible kernel-mode Vector into two fields.
+	 * Always try to match with prempt_v if kernel V-context exists. Then,
+	 * fallback to check non preempt_v if nesting happens, or if the config
+	 * is not set.
+	 */
+	if (IS_ENABLED(CONFIG_RISCV_ISA_V_PREEMPTIVE) && current->thread.kernel_vstate.datap) {
+		if (!riscv_preempt_v_started(current))
+			return true;
+	}
+	/*
+	 * Non-preemptible kernel-mode Vector temporarily disables bh. So we
+	 * must not return true on irq_disabled(). Otherwise we would fail the
+	 * lockdep check calling local_bh_enable()
+	 */
+	return !irqs_disabled() && !(riscv_v_flags() & RISCV_KERNEL_MODE_V);
+}
+
+#else /* ! CONFIG_RISCV_ISA_V */
+
+static __must_check inline bool may_use_simd(void)
+{
+	return false;
+}
+
+#endif /* ! CONFIG_RISCV_ISA_V */
+
+#endif
diff --git a/arch/riscv/include/asm/stacktrace.h b/arch/riscv/include/asm/stacktrace.h
index f7e8ef2418b9..b1495a7e06ce 100644
--- a/arch/riscv/include/asm/stacktrace.h
+++ b/arch/riscv/include/asm/stacktrace.h
@@ -21,4 +21,9 @@ static inline bool on_thread_stack(void)
 	return !(((unsigned long)(current->stack) ^ current_stack_pointer) & ~(THREAD_SIZE - 1));
 }
 
+
+#ifdef CONFIG_VMAP_STACK
+DECLARE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)], overflow_stack);
+#endif /* CONFIG_VMAP_STACK */
+
 #endif /* _ASM_RISCV_STACKTRACE_H */
diff --git a/arch/riscv/include/asm/suspend.h b/arch/riscv/include/asm/suspend.h
index 02f87867389a..491296a335d0 100644
--- a/arch/riscv/include/asm/suspend.h
+++ b/arch/riscv/include/asm/suspend.h
@@ -14,6 +14,7 @@ struct suspend_context {
 	struct pt_regs regs;
 	/* Saved and restored by high-level functions */
 	unsigned long scratch;
+	unsigned long envcfg;
 	unsigned long tvec;
 	unsigned long ie;
 #ifdef CONFIG_MMU
diff --git a/arch/riscv/include/asm/switch_to.h b/arch/riscv/include/asm/switch_to.h
index f90d8e42f3c7..7efdb0584d47 100644
--- a/arch/riscv/include/asm/switch_to.h
+++ b/arch/riscv/include/asm/switch_to.h
@@ -53,8 +53,7 @@ static inline void __switch_to_fpu(struct task_struct *prev,
 	struct pt_regs *regs;
 
 	regs = task_pt_regs(prev);
-	if (unlikely(regs->status & SR_SD))
-		fstate_save(prev, regs);
+	fstate_save(prev, regs);
 	fstate_restore(next, task_pt_regs(next));
 }
 
diff --git a/arch/riscv/include/asm/thread_info.h b/arch/riscv/include/asm/thread_info.h
index 574779900bfb..5d473343634b 100644
--- a/arch/riscv/include/asm/thread_info.h
+++ b/arch/riscv/include/asm/thread_info.h
@@ -28,7 +28,6 @@
 
 #define THREAD_SHIFT            (PAGE_SHIFT + THREAD_SIZE_ORDER)
 #define OVERFLOW_STACK_SIZE     SZ_4K
-#define SHADOW_OVERFLOW_STACK_SIZE (1024)
 
 #define IRQ_STACK_SIZE		THREAD_SIZE
 
@@ -103,12 +102,14 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
 #define TIF_NOTIFY_SIGNAL	9	/* signal notifications exist */
 #define TIF_UPROBE		10	/* uprobe breakpoint or singlestep */
 #define TIF_32BIT		11	/* compat-mode 32bit process */
+#define TIF_RISCV_V_DEFER_RESTORE	12 /* restore Vector before returing to user */
 
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_NOTIFY_SIGNAL	(1 << TIF_NOTIFY_SIGNAL)
 #define _TIF_UPROBE		(1 << TIF_UPROBE)
+#define _TIF_RISCV_V_DEFER_RESTORE	(1 << TIF_RISCV_V_DEFER_RESTORE)
 
 #define _TIF_WORK_MASK \
 	(_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | _TIF_NEED_RESCHED | \
diff --git a/arch/riscv/include/asm/tlb.h b/arch/riscv/include/asm/tlb.h
index 1eb5682b2af6..50b63b5c15bd 100644
--- a/arch/riscv/include/asm/tlb.h
+++ b/arch/riscv/include/asm/tlb.h
@@ -16,7 +16,7 @@ static void tlb_flush(struct mmu_gather *tlb);
 static inline void tlb_flush(struct mmu_gather *tlb)
 {
 #ifdef CONFIG_MMU
-	if (tlb->fullmm || tlb->need_flush_all)
+	if (tlb->fullmm || tlb->need_flush_all || tlb->freed_tables)
 		flush_tlb_mm(tlb->mm);
 	else
 		flush_tlb_mm_range(tlb->mm, tlb->start, tlb->end,
diff --git a/arch/riscv/include/asm/tlbbatch.h b/arch/riscv/include/asm/tlbbatch.h
new file mode 100644
index 000000000000..46014f70b9da
--- /dev/null
+++ b/arch/riscv/include/asm/tlbbatch.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2023 Rivos Inc.
+ */
+
+#ifndef _ASM_RISCV_TLBBATCH_H
+#define _ASM_RISCV_TLBBATCH_H
+
+#include <linux/cpumask.h>
+
+struct arch_tlbflush_unmap_batch {
+	struct cpumask cpumask;
+};
+
+#endif /* _ASM_RISCV_TLBBATCH_H */
diff --git a/arch/riscv/include/asm/tlbflush.h b/arch/riscv/include/asm/tlbflush.h
index 8f3418c5f172..4112cc8d1d69 100644
--- a/arch/riscv/include/asm/tlbflush.h
+++ b/arch/riscv/include/asm/tlbflush.h
@@ -41,11 +41,20 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
 void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		     unsigned long end);
 void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end);
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
 void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			unsigned long end);
 #endif
+
+bool arch_tlbbatch_should_defer(struct mm_struct *mm);
+void arch_tlbbatch_add_pending(struct arch_tlbflush_unmap_batch *batch,
+			       struct mm_struct *mm,
+			       unsigned long uaddr);
+void arch_flush_tlb_batched_pending(struct mm_struct *mm);
+void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch);
+
 #else /* CONFIG_SMP && CONFIG_MMU */
 
 #define flush_tlb_all() local_flush_tlb_all()
@@ -66,6 +75,7 @@ static inline void flush_tlb_kernel_range(unsigned long start,
 
 #define flush_tlb_mm(mm) flush_tlb_all()
 #define flush_tlb_mm_range(mm, start, end, page_size) flush_tlb_all()
+#define local_flush_tlb_kernel_range(start, end) flush_tlb_all()
 #endif /* !CONFIG_SMP || !CONFIG_MMU */
 
 #endif /* _ASM_RISCV_TLBFLUSH_H */
diff --git a/arch/riscv/include/asm/topology.h b/arch/riscv/include/asm/topology.h
index e316ab3b77f3..61183688bdd5 100644
--- a/arch/riscv/include/asm/topology.h
+++ b/arch/riscv/include/asm/topology.h
@@ -9,6 +9,7 @@
 #define arch_set_freq_scale		topology_set_freq_scale
 #define arch_scale_freq_capacity	topology_get_freq_scale
 #define arch_scale_freq_invariant	topology_scale_freq_invariant
+#define arch_scale_freq_ref		topology_get_freq_ref
 
 /* Replace task scheduler's default cpu-invariant accounting */
 #define arch_scale_cpu_capacity	topology_get_cpu_scale
diff --git a/arch/riscv/include/asm/vector.h b/arch/riscv/include/asm/vector.h
index 87aaef656257..0cd6f0a027d1 100644
--- a/arch/riscv/include/asm/vector.h
+++ b/arch/riscv/include/asm/vector.h
@@ -22,6 +22,18 @@
 extern unsigned long riscv_v_vsize;
 int riscv_v_setup_vsize(void);
 bool riscv_v_first_use_handler(struct pt_regs *regs);
+void kernel_vector_begin(void);
+void kernel_vector_end(void);
+void get_cpu_vector_context(void);
+void put_cpu_vector_context(void);
+void riscv_v_thread_free(struct task_struct *tsk);
+void __init riscv_v_setup_ctx_cache(void);
+void riscv_v_thread_alloc(struct task_struct *tsk);
+
+static inline u32 riscv_v_flags(void)
+{
+	return READ_ONCE(current->thread.riscv_v_flags);
+}
 
 static __always_inline bool has_vector(void)
 {
@@ -162,36 +174,89 @@ static inline void riscv_v_vstate_discard(struct pt_regs *regs)
 	__riscv_v_vstate_dirty(regs);
 }
 
-static inline void riscv_v_vstate_save(struct task_struct *task,
+static inline void riscv_v_vstate_save(struct __riscv_v_ext_state *vstate,
 				       struct pt_regs *regs)
 {
 	if ((regs->status & SR_VS) == SR_VS_DIRTY) {
-		struct __riscv_v_ext_state *vstate = &task->thread.vstate;
-
 		__riscv_v_vstate_save(vstate, vstate->datap);
 		__riscv_v_vstate_clean(regs);
 	}
 }
 
-static inline void riscv_v_vstate_restore(struct task_struct *task,
+static inline void riscv_v_vstate_restore(struct __riscv_v_ext_state *vstate,
 					  struct pt_regs *regs)
 {
 	if ((regs->status & SR_VS) != SR_VS_OFF) {
-		struct __riscv_v_ext_state *vstate = &task->thread.vstate;
-
 		__riscv_v_vstate_restore(vstate, vstate->datap);
 		__riscv_v_vstate_clean(regs);
 	}
 }
 
+static inline void riscv_v_vstate_set_restore(struct task_struct *task,
+					      struct pt_regs *regs)
+{
+	if ((regs->status & SR_VS) != SR_VS_OFF) {
+		set_tsk_thread_flag(task, TIF_RISCV_V_DEFER_RESTORE);
+		riscv_v_vstate_on(regs);
+	}
+}
+
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+static inline bool riscv_preempt_v_dirty(struct task_struct *task)
+{
+	return !!(task->thread.riscv_v_flags & RISCV_PREEMPT_V_DIRTY);
+}
+
+static inline bool riscv_preempt_v_restore(struct task_struct *task)
+{
+	return !!(task->thread.riscv_v_flags & RISCV_PREEMPT_V_NEED_RESTORE);
+}
+
+static inline void riscv_preempt_v_clear_dirty(struct task_struct *task)
+{
+	barrier();
+	task->thread.riscv_v_flags &= ~RISCV_PREEMPT_V_DIRTY;
+}
+
+static inline void riscv_preempt_v_set_restore(struct task_struct *task)
+{
+	barrier();
+	task->thread.riscv_v_flags |= RISCV_PREEMPT_V_NEED_RESTORE;
+}
+
+static inline bool riscv_preempt_v_started(struct task_struct *task)
+{
+	return !!(task->thread.riscv_v_flags & RISCV_PREEMPT_V);
+}
+
+#else /* !CONFIG_RISCV_ISA_V_PREEMPTIVE */
+static inline bool riscv_preempt_v_dirty(struct task_struct *task) { return false; }
+static inline bool riscv_preempt_v_restore(struct task_struct *task) { return false; }
+static inline bool riscv_preempt_v_started(struct task_struct *task) { return false; }
+#define riscv_preempt_v_clear_dirty(tsk)	do {} while (0)
+#define riscv_preempt_v_set_restore(tsk)	do {} while (0)
+#endif /* CONFIG_RISCV_ISA_V_PREEMPTIVE */
+
 static inline void __switch_to_vector(struct task_struct *prev,
 				      struct task_struct *next)
 {
 	struct pt_regs *regs;
 
-	regs = task_pt_regs(prev);
-	riscv_v_vstate_save(prev, regs);
-	riscv_v_vstate_restore(next, task_pt_regs(next));
+	if (riscv_preempt_v_started(prev)) {
+		if (riscv_preempt_v_dirty(prev)) {
+			__riscv_v_vstate_save(&prev->thread.kernel_vstate,
+					      prev->thread.kernel_vstate.datap);
+			riscv_preempt_v_clear_dirty(prev);
+		}
+	} else {
+		regs = task_pt_regs(prev);
+		riscv_v_vstate_save(&prev->thread.vstate, regs);
+	}
+
+	if (riscv_preempt_v_started(next))
+		riscv_preempt_v_set_restore(next);
+	else
+		riscv_v_vstate_set_restore(next, task_pt_regs(next));
 }
 
 void riscv_v_vstate_ctrl_init(struct task_struct *tsk);
@@ -208,11 +273,14 @@ static inline bool riscv_v_vstate_query(struct pt_regs *regs) { return false; }
 static inline bool riscv_v_vstate_ctrl_user_allowed(void) { return false; }
 #define riscv_v_vsize (0)
 #define riscv_v_vstate_discard(regs)		do {} while (0)
-#define riscv_v_vstate_save(task, regs)		do {} while (0)
-#define riscv_v_vstate_restore(task, regs)	do {} while (0)
+#define riscv_v_vstate_save(vstate, regs)	do {} while (0)
+#define riscv_v_vstate_restore(vstate, regs)	do {} while (0)
 #define __switch_to_vector(__prev, __next)	do {} while (0)
 #define riscv_v_vstate_off(regs)		do {} while (0)
 #define riscv_v_vstate_on(regs)			do {} while (0)
+#define riscv_v_thread_free(tsk)		do {} while (0)
+#define  riscv_v_setup_ctx_cache()		do {} while (0)
+#define riscv_v_thread_alloc(tsk)		do {} while (0)
 
 #endif /* CONFIG_RISCV_ISA_V */
 
diff --git a/arch/riscv/include/asm/vmalloc.h b/arch/riscv/include/asm/vmalloc.h
index 924d01b56c9a..51f6dfe19745 100644
--- a/arch/riscv/include/asm/vmalloc.h
+++ b/arch/riscv/include/asm/vmalloc.h
@@ -19,65 +19,6 @@ static inline bool arch_vmap_pmd_supported(pgprot_t prot)
 	return true;
 }
 
-#ifdef CONFIG_RISCV_ISA_SVNAPOT
-#include <linux/pgtable.h>
+#endif
 
-#define arch_vmap_pte_range_map_size arch_vmap_pte_range_map_size
-static inline unsigned long arch_vmap_pte_range_map_size(unsigned long addr, unsigned long end,
-							 u64 pfn, unsigned int max_page_shift)
-{
-	unsigned long map_size = PAGE_SIZE;
-	unsigned long size, order;
-
-	if (!has_svnapot())
-		return map_size;
-
-	for_each_napot_order_rev(order) {
-		if (napot_cont_shift(order) > max_page_shift)
-			continue;
-
-		size = napot_cont_size(order);
-		if (end - addr < size)
-			continue;
-
-		if (!IS_ALIGNED(addr, size))
-			continue;
-
-		if (!IS_ALIGNED(PFN_PHYS(pfn), size))
-			continue;
-
-		map_size = size;
-		break;
-	}
-
-	return map_size;
-}
-
-#define arch_vmap_pte_supported_shift arch_vmap_pte_supported_shift
-static inline int arch_vmap_pte_supported_shift(unsigned long size)
-{
-	int shift = PAGE_SHIFT;
-	unsigned long order;
-
-	if (!has_svnapot())
-		return shift;
-
-	WARN_ON_ONCE(size >= PMD_SIZE);
-
-	for_each_napot_order_rev(order) {
-		if (napot_cont_size(order) > size)
-			continue;
-
-		if (!IS_ALIGNED(size, napot_cont_size(order)))
-			continue;
-
-		shift = napot_cont_shift(order);
-		break;
-	}
-
-	return shift;
-}
-
-#endif /* CONFIG_RISCV_ISA_SVNAPOT */
-#endif /* CONFIG_HAVE_ARCH_HUGE_VMAP */
 #endif /* _ASM_RISCV_VMALLOC_H */
diff --git a/arch/riscv/include/asm/word-at-a-time.h b/arch/riscv/include/asm/word-at-a-time.h
index 7c086ac6ecd4..f3f031e34191 100644
--- a/arch/riscv/include/asm/word-at-a-time.h
+++ b/arch/riscv/include/asm/word-at-a-time.h
@@ -9,6 +9,7 @@
 #define _ASM_RISCV_WORD_AT_A_TIME_H
 
 
+#include <asm/asm-extable.h>
 #include <linux/kernel.h>
 
 struct word_at_a_time {
@@ -45,4 +46,30 @@ static inline unsigned long find_zero(unsigned long mask)
 /* The mask we created is directly usable as a bytemask */
 #define zero_bytemask(mask) (mask)
 
+#ifdef CONFIG_DCACHE_WORD_ACCESS
+
+/*
+ * Load an unaligned word from kernel space.
+ *
+ * In the (very unlikely) case of the word being a page-crosser
+ * and the next page not being mapped, take the exception and
+ * return zeroes in the non-existing part.
+ */
+static inline unsigned long load_unaligned_zeropad(const void *addr)
+{
+	unsigned long ret;
+
+	/* Load word from unaligned pointer addr */
+	asm(
+	"1:	" REG_L " %0, %2\n"
+	"2:\n"
+	_ASM_EXTABLE_LOAD_UNALIGNED_ZEROPAD(1b, 2b, %0, %1)
+	: "=&r" (ret)
+	: "r" (addr), "m" (*(unsigned long *)addr));
+
+	return ret;
+}
+
+#endif	/* CONFIG_DCACHE_WORD_ACCESS */
+
 #endif /* _ASM_RISCV_WORD_AT_A_TIME_H */
diff --git a/arch/riscv/include/asm/xip_fixup.h b/arch/riscv/include/asm/xip_fixup.h
index d4ffc3c37649..b65bf6306f69 100644
--- a/arch/riscv/include/asm/xip_fixup.h
+++ b/arch/riscv/include/asm/xip_fixup.h
@@ -13,7 +13,7 @@
         add \reg, \reg, t0
 .endm
 .macro XIP_FIXUP_FLASH_OFFSET reg
-	la t1, __data_loc
+	la t0, __data_loc
 	REG_L t1, _xip_phys_offset
 	sub \reg, \reg, t1
 	add \reg, \reg, t0
diff --git a/arch/riscv/include/asm/xor.h b/arch/riscv/include/asm/xor.h
new file mode 100644
index 000000000000..96011861e46b
--- /dev/null
+++ b/arch/riscv/include/asm/xor.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2021 SiFive
+ */
+
+#include <linux/hardirq.h>
+#include <asm-generic/xor.h>
+#ifdef CONFIG_RISCV_ISA_V
+#include <asm/vector.h>
+#include <asm/switch_to.h>
+#include <asm/asm-prototypes.h>
+
+static void xor_vector_2(unsigned long bytes, unsigned long *__restrict p1,
+			 const unsigned long *__restrict p2)
+{
+	kernel_vector_begin();
+	xor_regs_2_(bytes, p1, p2);
+	kernel_vector_end();
+}
+
+static void xor_vector_3(unsigned long bytes, unsigned long *__restrict p1,
+			 const unsigned long *__restrict p2,
+			 const unsigned long *__restrict p3)
+{
+	kernel_vector_begin();
+	xor_regs_3_(bytes, p1, p2, p3);
+	kernel_vector_end();
+}
+
+static void xor_vector_4(unsigned long bytes, unsigned long *__restrict p1,
+			 const unsigned long *__restrict p2,
+			 const unsigned long *__restrict p3,
+			 const unsigned long *__restrict p4)
+{
+	kernel_vector_begin();
+	xor_regs_4_(bytes, p1, p2, p3, p4);
+	kernel_vector_end();
+}
+
+static void xor_vector_5(unsigned long bytes, unsigned long *__restrict p1,
+			 const unsigned long *__restrict p2,
+			 const unsigned long *__restrict p3,
+			 const unsigned long *__restrict p4,
+			 const unsigned long *__restrict p5)
+{
+	kernel_vector_begin();
+	xor_regs_5_(bytes, p1, p2, p3, p4, p5);
+	kernel_vector_end();
+}
+
+static struct xor_block_template xor_block_rvv = {
+	.name = "rvv",
+	.do_2 = xor_vector_2,
+	.do_3 = xor_vector_3,
+	.do_4 = xor_vector_4,
+	.do_5 = xor_vector_5
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES           \
+	do {        \
+		xor_speed(&xor_block_8regs);    \
+		xor_speed(&xor_block_32regs);    \
+		if (has_vector()) { \
+			xor_speed(&xor_block_rvv);\
+		} \
+	} while (0)
+#endif
diff --git a/arch/riscv/include/uapi/asm/hwprobe.h b/arch/riscv/include/uapi/asm/hwprobe.h
index b659ffcfcdb4..9f2a8e3ff204 100644
--- a/arch/riscv/include/uapi/asm/hwprobe.h
+++ b/arch/riscv/include/uapi/asm/hwprobe.h
@@ -30,6 +30,35 @@ struct riscv_hwprobe {
 #define		RISCV_HWPROBE_EXT_ZBB		(1 << 4)
 #define		RISCV_HWPROBE_EXT_ZBS		(1 << 5)
 #define		RISCV_HWPROBE_EXT_ZICBOZ	(1 << 6)
+#define		RISCV_HWPROBE_EXT_ZBC		(1 << 7)
+#define		RISCV_HWPROBE_EXT_ZBKB		(1 << 8)
+#define		RISCV_HWPROBE_EXT_ZBKC		(1 << 9)
+#define		RISCV_HWPROBE_EXT_ZBKX		(1 << 10)
+#define		RISCV_HWPROBE_EXT_ZKND		(1 << 11)
+#define		RISCV_HWPROBE_EXT_ZKNE		(1 << 12)
+#define		RISCV_HWPROBE_EXT_ZKNH		(1 << 13)
+#define		RISCV_HWPROBE_EXT_ZKSED		(1 << 14)
+#define		RISCV_HWPROBE_EXT_ZKSH		(1 << 15)
+#define		RISCV_HWPROBE_EXT_ZKT		(1 << 16)
+#define		RISCV_HWPROBE_EXT_ZVBB		(1 << 17)
+#define		RISCV_HWPROBE_EXT_ZVBC		(1 << 18)
+#define		RISCV_HWPROBE_EXT_ZVKB		(1 << 19)
+#define		RISCV_HWPROBE_EXT_ZVKG		(1 << 20)
+#define		RISCV_HWPROBE_EXT_ZVKNED	(1 << 21)
+#define		RISCV_HWPROBE_EXT_ZVKNHA	(1 << 22)
+#define		RISCV_HWPROBE_EXT_ZVKNHB	(1 << 23)
+#define		RISCV_HWPROBE_EXT_ZVKSED	(1 << 24)
+#define		RISCV_HWPROBE_EXT_ZVKSH		(1 << 25)
+#define		RISCV_HWPROBE_EXT_ZVKT		(1 << 26)
+#define		RISCV_HWPROBE_EXT_ZFH		(1 << 27)
+#define		RISCV_HWPROBE_EXT_ZFHMIN	(1 << 28)
+#define		RISCV_HWPROBE_EXT_ZIHINTNTL	(1 << 29)
+#define		RISCV_HWPROBE_EXT_ZVFH		(1 << 30)
+#define		RISCV_HWPROBE_EXT_ZVFHMIN	(1 << 31)
+#define		RISCV_HWPROBE_EXT_ZFA		(1ULL << 32)
+#define		RISCV_HWPROBE_EXT_ZTSO		(1ULL << 33)
+#define		RISCV_HWPROBE_EXT_ZACAS		(1ULL << 34)
+#define		RISCV_HWPROBE_EXT_ZICOND	(1ULL << 35)
 #define RISCV_HWPROBE_KEY_CPUPERF_0	5
 #define		RISCV_HWPROBE_MISALIGNED_UNKNOWN	(0 << 0)
 #define		RISCV_HWPROBE_MISALIGNED_EMULATED	(1 << 0)
@@ -40,4 +69,7 @@ struct riscv_hwprobe {
 #define RISCV_HWPROBE_KEY_ZICBOZ_BLOCK_SIZE	6
 /* Increase RISCV_HWPROBE_MAX_KEY when adding items. */
 
+/* Flags */
+#define RISCV_HWPROBE_WHICH_CPUS	(1 << 0)
+
 #endif
diff --git a/arch/riscv/include/uapi/asm/kvm.h b/arch/riscv/include/uapi/asm/kvm.h
index 60d3b21dead7..7499e88a947c 100644
--- a/arch/riscv/include/uapi/asm/kvm.h
+++ b/arch/riscv/include/uapi/asm/kvm.h
@@ -139,6 +139,33 @@ enum KVM_RISCV_ISA_EXT_ID {
 	KVM_RISCV_ISA_EXT_ZIHPM,
 	KVM_RISCV_ISA_EXT_SMSTATEEN,
 	KVM_RISCV_ISA_EXT_ZICOND,
+	KVM_RISCV_ISA_EXT_ZBC,
+	KVM_RISCV_ISA_EXT_ZBKB,
+	KVM_RISCV_ISA_EXT_ZBKC,
+	KVM_RISCV_ISA_EXT_ZBKX,
+	KVM_RISCV_ISA_EXT_ZKND,
+	KVM_RISCV_ISA_EXT_ZKNE,
+	KVM_RISCV_ISA_EXT_ZKNH,
+	KVM_RISCV_ISA_EXT_ZKR,
+	KVM_RISCV_ISA_EXT_ZKSED,
+	KVM_RISCV_ISA_EXT_ZKSH,
+	KVM_RISCV_ISA_EXT_ZKT,
+	KVM_RISCV_ISA_EXT_ZVBB,
+	KVM_RISCV_ISA_EXT_ZVBC,
+	KVM_RISCV_ISA_EXT_ZVKB,
+	KVM_RISCV_ISA_EXT_ZVKG,
+	KVM_RISCV_ISA_EXT_ZVKNED,
+	KVM_RISCV_ISA_EXT_ZVKNHA,
+	KVM_RISCV_ISA_EXT_ZVKNHB,
+	KVM_RISCV_ISA_EXT_ZVKSED,
+	KVM_RISCV_ISA_EXT_ZVKSH,
+	KVM_RISCV_ISA_EXT_ZVKT,
+	KVM_RISCV_ISA_EXT_ZFH,
+	KVM_RISCV_ISA_EXT_ZFHMIN,
+	KVM_RISCV_ISA_EXT_ZIHINTNTL,
+	KVM_RISCV_ISA_EXT_ZVFH,
+	KVM_RISCV_ISA_EXT_ZVFHMIN,
+	KVM_RISCV_ISA_EXT_ZFA,
 	KVM_RISCV_ISA_EXT_MAX,
 };
 
@@ -157,9 +184,16 @@ enum KVM_RISCV_SBI_EXT_ID {
 	KVM_RISCV_SBI_EXT_EXPERIMENTAL,
 	KVM_RISCV_SBI_EXT_VENDOR,
 	KVM_RISCV_SBI_EXT_DBCN,
+	KVM_RISCV_SBI_EXT_STA,
 	KVM_RISCV_SBI_EXT_MAX,
 };
 
+/* SBI STA extension registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */
+struct kvm_riscv_sbi_sta {
+	unsigned long shmem_lo;
+	unsigned long shmem_hi;
+};
+
 /* Possible states for kvm_riscv_timer */
 #define KVM_RISCV_TIMER_STATE_OFF	0
 #define KVM_RISCV_TIMER_STATE_ON	1
@@ -241,6 +275,12 @@ enum KVM_RISCV_SBI_EXT_ID {
 #define KVM_REG_RISCV_VECTOR_REG(n)	\
 		((n) + sizeof(struct __riscv_v_ext_state) / sizeof(unsigned long))
 
+/* Registers for specific SBI extensions are mapped as type 10 */
+#define KVM_REG_RISCV_SBI_STATE		(0x0a << KVM_REG_RISCV_TYPE_SHIFT)
+#define KVM_REG_RISCV_SBI_STA		(0x0 << KVM_REG_RISCV_SUBTYPE_SHIFT)
+#define KVM_REG_RISCV_SBI_STA_REG(name)		\
+		(offsetof(struct kvm_riscv_sbi_sta, name) / sizeof(unsigned long))
+
 /* Device Control API: RISC-V AIA */
 #define KVM_DEV_RISCV_APLIC_ALIGN		0x1000
 #define KVM_DEV_RISCV_APLIC_SIZE		0x4000
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index fee22a3d1b53..604d6bf7e476 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -7,11 +7,12 @@ ifdef CONFIG_FTRACE
 CFLAGS_REMOVE_ftrace.o	= $(CC_FLAGS_FTRACE)
 CFLAGS_REMOVE_patch.o	= $(CC_FLAGS_FTRACE)
 CFLAGS_REMOVE_sbi.o	= $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_return_address.o	= $(CC_FLAGS_FTRACE)
 endif
 CFLAGS_syscall_table.o	+= $(call cc-option,-Wno-override-init,)
 CFLAGS_compat_syscall_table.o += $(call cc-option,-Wno-override-init,)
 
-ifdef CONFIG_KEXEC
+ifdef CONFIG_KEXEC_CORE
 AFLAGS_kexec_relocate.o := -mcmodel=medany $(call cc-option,-mno-relax)
 endif
 
@@ -46,10 +47,12 @@ obj-y	+= irq.o
 obj-y	+= process.o
 obj-y	+= ptrace.o
 obj-y	+= reset.o
+obj-y	+= return_address.o
 obj-y	+= setup.o
 obj-y	+= signal.o
 obj-y	+= syscall_table.o
 obj-y	+= sys_riscv.o
+obj-y	+= sys_hwprobe.o
 obj-y	+= time.o
 obj-y	+= traps.o
 obj-y	+= riscv_ksyms.o
@@ -63,6 +66,7 @@ obj-$(CONFIG_MMU) += vdso.o vdso/
 obj-$(CONFIG_RISCV_MISALIGNED)	+= traps_misaligned.o
 obj-$(CONFIG_FPU)		+= fpu.o
 obj-$(CONFIG_RISCV_ISA_V)	+= vector.o
+obj-$(CONFIG_RISCV_ISA_V)	+= kernel_mode_vector.o
 obj-$(CONFIG_SMP)		+= smpboot.o
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SMP)		+= cpu_ops.o
@@ -85,6 +89,7 @@ obj-$(CONFIG_SMP)		+= sbi-ipi.o
 obj-$(CONFIG_SMP) += cpu_ops_sbi.o
 endif
 obj-$(CONFIG_HOTPLUG_CPU)	+= cpu-hotplug.o
+obj-$(CONFIG_PARAVIRT)		+= paravirt.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_KEXEC_CORE)	+= kexec_relocate.o crash_save_regs.o machine_kexec.o
 obj-$(CONFIG_KEXEC_FILE)	+= elf_kexec.o machine_kexec_file.o
diff --git a/arch/riscv/kernel/cfi.c b/arch/riscv/kernel/cfi.c
index 820158d7a291..6ec9dbd7292e 100644
--- a/arch/riscv/kernel/cfi.c
+++ b/arch/riscv/kernel/cfi.c
@@ -4,7 +4,7 @@
  *
  * Copyright (C) 2023 Google LLC
  */
-#include <asm/cfi.h>
+#include <linux/cfi.h>
 #include <asm/insn.h>
 
 /*
diff --git a/arch/riscv/kernel/cpu-hotplug.c b/arch/riscv/kernel/cpu-hotplug.c
index 457a18efcb11..28b58fc5ad19 100644
--- a/arch/riscv/kernel/cpu-hotplug.c
+++ b/arch/riscv/kernel/cpu-hotplug.c
@@ -18,7 +18,7 @@
 
 bool cpu_has_hotplug(unsigned int cpu)
 {
-	if (cpu_ops[cpu]->cpu_stop)
+	if (cpu_ops->cpu_stop)
 		return true;
 
 	return false;
@@ -29,25 +29,18 @@ bool cpu_has_hotplug(unsigned int cpu)
  */
 int __cpu_disable(void)
 {
-	int ret = 0;
 	unsigned int cpu = smp_processor_id();
 
-	if (!cpu_ops[cpu] || !cpu_ops[cpu]->cpu_stop)
+	if (!cpu_ops->cpu_stop)
 		return -EOPNOTSUPP;
 
-	if (cpu_ops[cpu]->cpu_disable)
-		ret = cpu_ops[cpu]->cpu_disable(cpu);
-
-	if (ret)
-		return ret;
-
 	remove_cpu_topology(cpu);
 	numa_remove_cpu(cpu);
 	set_cpu_online(cpu, false);
 	riscv_ipi_disable();
 	irq_migrate_all_off_this_cpu();
 
-	return ret;
+	return 0;
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -62,8 +55,8 @@ void arch_cpuhp_cleanup_dead_cpu(unsigned int cpu)
 	pr_notice("CPU%u: off\n", cpu);
 
 	/* Verify from the firmware if the cpu is really stopped*/
-	if (cpu_ops[cpu]->cpu_is_stopped)
-		ret = cpu_ops[cpu]->cpu_is_stopped(cpu);
+	if (cpu_ops->cpu_is_stopped)
+		ret = cpu_ops->cpu_is_stopped(cpu);
 	if (ret)
 		pr_warn("CPU%d may not have stopped: %d\n", cpu, ret);
 }
@@ -77,7 +70,7 @@ void __noreturn arch_cpu_idle_dead(void)
 
 	cpuhp_ap_report_dead();
 
-	cpu_ops[smp_processor_id()]->cpu_stop();
+	cpu_ops->cpu_stop();
 	/* It should never reach here */
 	BUG();
 }
diff --git a/arch/riscv/kernel/cpu_ops.c b/arch/riscv/kernel/cpu_ops.c
index eb479a88a954..6a8bd8f4db07 100644
--- a/arch/riscv/kernel/cpu_ops.c
+++ b/arch/riscv/kernel/cpu_ops.c
@@ -13,25 +13,21 @@
 #include <asm/sbi.h>
 #include <asm/smp.h>
 
-const struct cpu_operations *cpu_ops[NR_CPUS] __ro_after_init;
+const struct cpu_operations *cpu_ops __ro_after_init = &cpu_ops_spinwait;
 
 extern const struct cpu_operations cpu_ops_sbi;
 #ifndef CONFIG_RISCV_BOOT_SPINWAIT
 const struct cpu_operations cpu_ops_spinwait = {
-	.name		= "",
-	.cpu_prepare	= NULL,
 	.cpu_start	= NULL,
 };
 #endif
 
-void __init cpu_set_ops(int cpuid)
+void __init cpu_set_ops(void)
 {
 #if IS_ENABLED(CONFIG_RISCV_SBI)
 	if (sbi_probe_extension(SBI_EXT_HSM)) {
-		if (!cpuid)
-			pr_info("SBI HSM extension detected\n");
-		cpu_ops[cpuid] = &cpu_ops_sbi;
-	} else
+		pr_info("SBI HSM extension detected\n");
+		cpu_ops = &cpu_ops_sbi;
+	}
 #endif
-		cpu_ops[cpuid] = &cpu_ops_spinwait;
 }
diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
index efa0f0816634..1cc7df740edd 100644
--- a/arch/riscv/kernel/cpu_ops_sbi.c
+++ b/arch/riscv/kernel/cpu_ops_sbi.c
@@ -79,23 +79,7 @@ static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
 	return sbi_hsm_hart_start(hartid, boot_addr, hsm_data);
 }
 
-static int sbi_cpu_prepare(unsigned int cpuid)
-{
-	if (!cpu_ops_sbi.cpu_start) {
-		pr_err("cpu start method not defined for CPU [%d]\n", cpuid);
-		return -ENODEV;
-	}
-	return 0;
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
-static int sbi_cpu_disable(unsigned int cpuid)
-{
-	if (!cpu_ops_sbi.cpu_stop)
-		return -EOPNOTSUPP;
-	return 0;
-}
-
 static void sbi_cpu_stop(void)
 {
 	int ret;
@@ -118,11 +102,8 @@ static int sbi_cpu_is_stopped(unsigned int cpuid)
 #endif
 
 const struct cpu_operations cpu_ops_sbi = {
-	.name		= "sbi",
-	.cpu_prepare	= sbi_cpu_prepare,
 	.cpu_start	= sbi_cpu_start,
 #ifdef CONFIG_HOTPLUG_CPU
-	.cpu_disable	= sbi_cpu_disable,
 	.cpu_stop	= sbi_cpu_stop,
 	.cpu_is_stopped	= sbi_cpu_is_stopped,
 #endif
diff --git a/arch/riscv/kernel/cpu_ops_spinwait.c b/arch/riscv/kernel/cpu_ops_spinwait.c
index d98d19226b5f..613872b0a21a 100644
--- a/arch/riscv/kernel/cpu_ops_spinwait.c
+++ b/arch/riscv/kernel/cpu_ops_spinwait.c
@@ -39,15 +39,6 @@ static void cpu_update_secondary_bootdata(unsigned int cpuid,
 	WRITE_ONCE(__cpu_spinwait_task_pointer[hartid], tidle);
 }
 
-static int spinwait_cpu_prepare(unsigned int cpuid)
-{
-	if (!cpu_ops_spinwait.cpu_start) {
-		pr_err("cpu start method not defined for CPU [%d]\n", cpuid);
-		return -ENODEV;
-	}
-	return 0;
-}
-
 static int spinwait_cpu_start(unsigned int cpuid, struct task_struct *tidle)
 {
 	/*
@@ -64,7 +55,5 @@ static int spinwait_cpu_start(unsigned int cpuid, struct task_struct *tidle)
 }
 
 const struct cpu_operations cpu_ops_spinwait = {
-	.name		= "spinwait",
-	.cpu_prepare	= spinwait_cpu_prepare,
 	.cpu_start	= spinwait_cpu_start,
 };
diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c
index b3785ffc1570..79a5a35fab96 100644
--- a/arch/riscv/kernel/cpufeature.c
+++ b/arch/riscv/kernel/cpufeature.c
@@ -8,8 +8,10 @@
 
 #include <linux/acpi.h>
 #include <linux/bitmap.h>
+#include <linux/cpu.h>
 #include <linux/cpuhotplug.h>
 #include <linux/ctype.h>
+#include <linux/jump_label.h>
 #include <linux/log2.h>
 #include <linux/memory.h>
 #include <linux/module.h>
@@ -22,6 +24,7 @@
 #include <asm/hwprobe.h>
 #include <asm/patch.h>
 #include <asm/processor.h>
+#include <asm/sbi.h>
 #include <asm/vector.h>
 
 #include "copy-unaligned.h"
@@ -44,6 +47,8 @@ struct riscv_isainfo hart_isa[NR_CPUS];
 /* Performance information */
 DEFINE_PER_CPU(long, misaligned_access_speed);
 
+static cpumask_t fast_misaligned_access;
+
 /**
  * riscv_isa_extension_base() - Get base extension word
  *
@@ -70,7 +75,7 @@ EXPORT_SYMBOL_GPL(riscv_isa_extension_base);
  *
  * NOTE: If isa_bitmap is NULL then Host ISA bitmap will be used.
  */
-bool __riscv_isa_extension_available(const unsigned long *isa_bitmap, int bit)
+bool __riscv_isa_extension_available(const unsigned long *isa_bitmap, unsigned int bit)
 {
 	const unsigned long *bmap = (isa_bitmap) ? isa_bitmap : riscv_isa;
 
@@ -102,17 +107,111 @@ static bool riscv_isa_extension_check(int id)
 			return false;
 		}
 		return true;
+	case RISCV_ISA_EXT_INVALID:
+		return false;
 	}
 
 	return true;
 }
 
-#define __RISCV_ISA_EXT_DATA(_name, _id) {	\
-	.name = #_name,				\
-	.property = #_name,			\
-	.id = _id,				\
+#define _RISCV_ISA_EXT_DATA(_name, _id, _subset_exts, _subset_exts_size) {	\
+	.name = #_name,								\
+	.property = #_name,							\
+	.id = _id,								\
+	.subset_ext_ids = _subset_exts,						\
+	.subset_ext_size = _subset_exts_size					\
 }
 
+#define __RISCV_ISA_EXT_DATA(_name, _id) _RISCV_ISA_EXT_DATA(_name, _id, NULL, 0)
+
+/* Used to declare pure "lasso" extension (Zk for instance) */
+#define __RISCV_ISA_EXT_BUNDLE(_name, _bundled_exts) \
+	_RISCV_ISA_EXT_DATA(_name, RISCV_ISA_EXT_INVALID, _bundled_exts, ARRAY_SIZE(_bundled_exts))
+
+/* Used to declare extensions that are a superset of other extensions (Zvbb for instance) */
+#define __RISCV_ISA_EXT_SUPERSET(_name, _id, _sub_exts) \
+	_RISCV_ISA_EXT_DATA(_name, _id, _sub_exts, ARRAY_SIZE(_sub_exts))
+
+static const unsigned int riscv_zk_bundled_exts[] = {
+	RISCV_ISA_EXT_ZBKB,
+	RISCV_ISA_EXT_ZBKC,
+	RISCV_ISA_EXT_ZBKX,
+	RISCV_ISA_EXT_ZKND,
+	RISCV_ISA_EXT_ZKNE,
+	RISCV_ISA_EXT_ZKR,
+	RISCV_ISA_EXT_ZKT,
+};
+
+static const unsigned int riscv_zkn_bundled_exts[] = {
+	RISCV_ISA_EXT_ZBKB,
+	RISCV_ISA_EXT_ZBKC,
+	RISCV_ISA_EXT_ZBKX,
+	RISCV_ISA_EXT_ZKND,
+	RISCV_ISA_EXT_ZKNE,
+	RISCV_ISA_EXT_ZKNH,
+};
+
+static const unsigned int riscv_zks_bundled_exts[] = {
+	RISCV_ISA_EXT_ZBKB,
+	RISCV_ISA_EXT_ZBKC,
+	RISCV_ISA_EXT_ZKSED,
+	RISCV_ISA_EXT_ZKSH
+};
+
+#define RISCV_ISA_EXT_ZVKN	\
+	RISCV_ISA_EXT_ZVKNED,	\
+	RISCV_ISA_EXT_ZVKNHB,	\
+	RISCV_ISA_EXT_ZVKB,	\
+	RISCV_ISA_EXT_ZVKT
+
+static const unsigned int riscv_zvkn_bundled_exts[] = {
+	RISCV_ISA_EXT_ZVKN
+};
+
+static const unsigned int riscv_zvknc_bundled_exts[] = {
+	RISCV_ISA_EXT_ZVKN,
+	RISCV_ISA_EXT_ZVBC
+};
+
+static const unsigned int riscv_zvkng_bundled_exts[] = {
+	RISCV_ISA_EXT_ZVKN,
+	RISCV_ISA_EXT_ZVKG
+};
+
+#define RISCV_ISA_EXT_ZVKS	\
+	RISCV_ISA_EXT_ZVKSED,	\
+	RISCV_ISA_EXT_ZVKSH,	\
+	RISCV_ISA_EXT_ZVKB,	\
+	RISCV_ISA_EXT_ZVKT
+
+static const unsigned int riscv_zvks_bundled_exts[] = {
+	RISCV_ISA_EXT_ZVKS
+};
+
+static const unsigned int riscv_zvksc_bundled_exts[] = {
+	RISCV_ISA_EXT_ZVKS,
+	RISCV_ISA_EXT_ZVBC
+};
+
+static const unsigned int riscv_zvksg_bundled_exts[] = {
+	RISCV_ISA_EXT_ZVKS,
+	RISCV_ISA_EXT_ZVKG
+};
+
+static const unsigned int riscv_zvbb_exts[] = {
+	RISCV_ISA_EXT_ZVKB
+};
+
+/*
+ * While the [ms]envcfg CSRs were not defined until version 1.12 of the RISC-V
+ * privileged ISA, the existence of the CSRs is implied by any extension which
+ * specifies [ms]envcfg bit(s). Hence, we define a custom ISA extension for the
+ * existence of the CSR, and treat it as a subset of those other extensions.
+ */
+static const unsigned int riscv_xlinuxenvcfg_exts[] = {
+	RISCV_ISA_EXT_XLINUXENVCFG
+};
+
 /*
  * The canonical order of ISA extension names in the ISA string is defined in
  * chapter 27 of the unprivileged specification.
@@ -160,23 +259,57 @@ const struct riscv_isa_ext_data riscv_isa_ext[] = {
 	__RISCV_ISA_EXT_DATA(d, RISCV_ISA_EXT_d),
 	__RISCV_ISA_EXT_DATA(q, RISCV_ISA_EXT_q),
 	__RISCV_ISA_EXT_DATA(c, RISCV_ISA_EXT_c),
-	__RISCV_ISA_EXT_DATA(b, RISCV_ISA_EXT_b),
-	__RISCV_ISA_EXT_DATA(k, RISCV_ISA_EXT_k),
-	__RISCV_ISA_EXT_DATA(j, RISCV_ISA_EXT_j),
-	__RISCV_ISA_EXT_DATA(p, RISCV_ISA_EXT_p),
 	__RISCV_ISA_EXT_DATA(v, RISCV_ISA_EXT_v),
 	__RISCV_ISA_EXT_DATA(h, RISCV_ISA_EXT_h),
-	__RISCV_ISA_EXT_DATA(zicbom, RISCV_ISA_EXT_ZICBOM),
-	__RISCV_ISA_EXT_DATA(zicboz, RISCV_ISA_EXT_ZICBOZ),
+	__RISCV_ISA_EXT_SUPERSET(zicbom, RISCV_ISA_EXT_ZICBOM, riscv_xlinuxenvcfg_exts),
+	__RISCV_ISA_EXT_SUPERSET(zicboz, RISCV_ISA_EXT_ZICBOZ, riscv_xlinuxenvcfg_exts),
 	__RISCV_ISA_EXT_DATA(zicntr, RISCV_ISA_EXT_ZICNTR),
 	__RISCV_ISA_EXT_DATA(zicond, RISCV_ISA_EXT_ZICOND),
 	__RISCV_ISA_EXT_DATA(zicsr, RISCV_ISA_EXT_ZICSR),
 	__RISCV_ISA_EXT_DATA(zifencei, RISCV_ISA_EXT_ZIFENCEI),
+	__RISCV_ISA_EXT_DATA(zihintntl, RISCV_ISA_EXT_ZIHINTNTL),
 	__RISCV_ISA_EXT_DATA(zihintpause, RISCV_ISA_EXT_ZIHINTPAUSE),
 	__RISCV_ISA_EXT_DATA(zihpm, RISCV_ISA_EXT_ZIHPM),
+	__RISCV_ISA_EXT_DATA(zacas, RISCV_ISA_EXT_ZACAS),
+	__RISCV_ISA_EXT_DATA(zfa, RISCV_ISA_EXT_ZFA),
+	__RISCV_ISA_EXT_DATA(zfh, RISCV_ISA_EXT_ZFH),
+	__RISCV_ISA_EXT_DATA(zfhmin, RISCV_ISA_EXT_ZFHMIN),
 	__RISCV_ISA_EXT_DATA(zba, RISCV_ISA_EXT_ZBA),
 	__RISCV_ISA_EXT_DATA(zbb, RISCV_ISA_EXT_ZBB),
+	__RISCV_ISA_EXT_DATA(zbc, RISCV_ISA_EXT_ZBC),
+	__RISCV_ISA_EXT_DATA(zbkb, RISCV_ISA_EXT_ZBKB),
+	__RISCV_ISA_EXT_DATA(zbkc, RISCV_ISA_EXT_ZBKC),
+	__RISCV_ISA_EXT_DATA(zbkx, RISCV_ISA_EXT_ZBKX),
 	__RISCV_ISA_EXT_DATA(zbs, RISCV_ISA_EXT_ZBS),
+	__RISCV_ISA_EXT_BUNDLE(zk, riscv_zk_bundled_exts),
+	__RISCV_ISA_EXT_BUNDLE(zkn, riscv_zkn_bundled_exts),
+	__RISCV_ISA_EXT_DATA(zknd, RISCV_ISA_EXT_ZKND),
+	__RISCV_ISA_EXT_DATA(zkne, RISCV_ISA_EXT_ZKNE),
+	__RISCV_ISA_EXT_DATA(zknh, RISCV_ISA_EXT_ZKNH),
+	__RISCV_ISA_EXT_DATA(zkr, RISCV_ISA_EXT_ZKR),
+	__RISCV_ISA_EXT_BUNDLE(zks, riscv_zks_bundled_exts),
+	__RISCV_ISA_EXT_DATA(zkt, RISCV_ISA_EXT_ZKT),
+	__RISCV_ISA_EXT_DATA(zksed, RISCV_ISA_EXT_ZKSED),
+	__RISCV_ISA_EXT_DATA(zksh, RISCV_ISA_EXT_ZKSH),
+	__RISCV_ISA_EXT_DATA(ztso, RISCV_ISA_EXT_ZTSO),
+	__RISCV_ISA_EXT_SUPERSET(zvbb, RISCV_ISA_EXT_ZVBB, riscv_zvbb_exts),
+	__RISCV_ISA_EXT_DATA(zvbc, RISCV_ISA_EXT_ZVBC),
+	__RISCV_ISA_EXT_DATA(zvfh, RISCV_ISA_EXT_ZVFH),
+	__RISCV_ISA_EXT_DATA(zvfhmin, RISCV_ISA_EXT_ZVFHMIN),
+	__RISCV_ISA_EXT_DATA(zvkb, RISCV_ISA_EXT_ZVKB),
+	__RISCV_ISA_EXT_DATA(zvkg, RISCV_ISA_EXT_ZVKG),
+	__RISCV_ISA_EXT_BUNDLE(zvkn, riscv_zvkn_bundled_exts),
+	__RISCV_ISA_EXT_BUNDLE(zvknc, riscv_zvknc_bundled_exts),
+	__RISCV_ISA_EXT_DATA(zvkned, RISCV_ISA_EXT_ZVKNED),
+	__RISCV_ISA_EXT_BUNDLE(zvkng, riscv_zvkng_bundled_exts),
+	__RISCV_ISA_EXT_DATA(zvknha, RISCV_ISA_EXT_ZVKNHA),
+	__RISCV_ISA_EXT_DATA(zvknhb, RISCV_ISA_EXT_ZVKNHB),
+	__RISCV_ISA_EXT_BUNDLE(zvks, riscv_zvks_bundled_exts),
+	__RISCV_ISA_EXT_BUNDLE(zvksc, riscv_zvksc_bundled_exts),
+	__RISCV_ISA_EXT_DATA(zvksed, RISCV_ISA_EXT_ZVKSED),
+	__RISCV_ISA_EXT_DATA(zvksh, RISCV_ISA_EXT_ZVKSH),
+	__RISCV_ISA_EXT_BUNDLE(zvksg, riscv_zvksg_bundled_exts),
+	__RISCV_ISA_EXT_DATA(zvkt, RISCV_ISA_EXT_ZVKT),
 	__RISCV_ISA_EXT_DATA(smaia, RISCV_ISA_EXT_SMAIA),
 	__RISCV_ISA_EXT_DATA(smstateen, RISCV_ISA_EXT_SMSTATEEN),
 	__RISCV_ISA_EXT_DATA(ssaia, RISCV_ISA_EXT_SSAIA),
@@ -189,6 +322,31 @@ const struct riscv_isa_ext_data riscv_isa_ext[] = {
 
 const size_t riscv_isa_ext_count = ARRAY_SIZE(riscv_isa_ext);
 
+static void __init match_isa_ext(const struct riscv_isa_ext_data *ext, const char *name,
+				 const char *name_end, struct riscv_isainfo *isainfo)
+{
+	if ((name_end - name == strlen(ext->name)) &&
+	     !strncasecmp(name, ext->name, name_end - name)) {
+		/*
+		 * If this is a bundle, enable all the ISA extensions that
+		 * comprise the bundle.
+		 */
+		if (ext->subset_ext_size) {
+			for (int i = 0; i < ext->subset_ext_size; i++) {
+				if (riscv_isa_extension_check(ext->subset_ext_ids[i]))
+					set_bit(ext->subset_ext_ids[i], isainfo->isa);
+			}
+		}
+
+		/*
+		 * This is valid even for bundle extensions which uses the RISCV_ISA_EXT_INVALID id
+		 * (rejected by riscv_isa_extension_check()).
+		 */
+		if (riscv_isa_extension_check(ext->id))
+			set_bit(ext->id, isainfo->isa);
+	}
+}
+
 static void __init riscv_parse_isa_string(unsigned long *this_hwcap, struct riscv_isainfo *isainfo,
 					  unsigned long *isa2hwcap, const char *isa)
 {
@@ -321,14 +479,6 @@ static void __init riscv_parse_isa_string(unsigned long *this_hwcap, struct risc
 		if (*isa == '_')
 			++isa;
 
-#define SET_ISA_EXT_MAP(name, bit)						\
-		do {								\
-			if ((ext_end - ext == strlen(name)) &&			\
-			     !strncasecmp(ext, name, strlen(name)) &&		\
-			     riscv_isa_extension_check(bit))			\
-				set_bit(bit, isainfo->isa);			\
-		} while (false)							\
-
 		if (unlikely(ext_err))
 			continue;
 		if (!ext_long) {
@@ -340,10 +490,8 @@ static void __init riscv_parse_isa_string(unsigned long *this_hwcap, struct risc
 			}
 		} else {
 			for (int i = 0; i < riscv_isa_ext_count; i++)
-				SET_ISA_EXT_MAP(riscv_isa_ext[i].name,
-						riscv_isa_ext[i].id);
+				match_isa_ext(&riscv_isa_ext[i], ext, ext_end, isainfo);
 		}
-#undef SET_ISA_EXT_MAP
 	}
 }
 
@@ -402,6 +550,20 @@ static void __init riscv_fill_hwcap_from_isa_string(unsigned long *isa2hwcap)
 		}
 
 		/*
+		 * "V" in ISA strings is ambiguous in practice: it should mean
+		 * just the standard V-1.0 but vendors aren't well behaved.
+		 * Many vendors with T-Head CPU cores which implement the 0.7.1
+		 * version of the vector specification put "v" into their DTs.
+		 * CPU cores with the ratified spec will contain non-zero
+		 * marchid.
+		 */
+		if (acpi_disabled && riscv_cached_mvendorid(cpu) == THEAD_VENDOR_ID &&
+		    riscv_cached_marchid(cpu) == 0x0) {
+			this_hwcap &= ~isa2hwcap[RISCV_ISA_EXT_v];
+			clear_bit(RISCV_ISA_EXT_v, isainfo->isa);
+		}
+
+		/*
 		 * All "okay" hart should have same isa. Set HWCAP based on
 		 * common capabilities of every "okay" hart, in case they don't
 		 * have.
@@ -442,18 +604,26 @@ static int __init riscv_fill_hwcap_from_ext_list(unsigned long *isa2hwcap)
 		}
 
 		for (int i = 0; i < riscv_isa_ext_count; i++) {
+			const struct riscv_isa_ext_data *ext = &riscv_isa_ext[i];
+
 			if (of_property_match_string(cpu_node, "riscv,isa-extensions",
-						     riscv_isa_ext[i].property) < 0)
+						     ext->property) < 0)
 				continue;
 
-			if (!riscv_isa_extension_check(riscv_isa_ext[i].id))
-				continue;
+			if (ext->subset_ext_size) {
+				for (int j = 0; j < ext->subset_ext_size; j++) {
+					if (riscv_isa_extension_check(ext->subset_ext_ids[i]))
+						set_bit(ext->subset_ext_ids[j], isainfo->isa);
+				}
+			}
 
-			/* Only single letter extensions get set in hwcap */
-			if (strnlen(riscv_isa_ext[i].name, 2) == 1)
-				this_hwcap |= isa2hwcap[riscv_isa_ext[i].id];
+			if (riscv_isa_extension_check(ext->id)) {
+				set_bit(ext->id, isainfo->isa);
 
-			set_bit(riscv_isa_ext[i].id, isainfo->isa);
+				/* Only single letter extensions get set in hwcap */
+				if (strnlen(riscv_isa_ext[i].name, 2) == 1)
+					this_hwcap |= isa2hwcap[riscv_isa_ext[i].id];
+			}
 		}
 
 		of_node_put(cpu_node);
@@ -643,6 +813,16 @@ static int check_unaligned_access(void *param)
 		(speed == RISCV_HWPROBE_MISALIGNED_FAST) ? "fast" : "slow");
 
 	per_cpu(misaligned_access_speed, cpu) = speed;
+
+	/*
+	 * Set the value of fast_misaligned_access of a CPU. These operations
+	 * are atomic to avoid race conditions.
+	 */
+	if (speed == RISCV_HWPROBE_MISALIGNED_FAST)
+		cpumask_set_cpu(cpu, &fast_misaligned_access);
+	else
+		cpumask_clear_cpu(cpu, &fast_misaligned_access);
+
 	return 0;
 }
 
@@ -655,13 +835,69 @@ static void check_unaligned_access_nonboot_cpu(void *param)
 		check_unaligned_access(pages[cpu]);
 }
 
+DEFINE_STATIC_KEY_FALSE(fast_misaligned_access_speed_key);
+
+static void modify_unaligned_access_branches(cpumask_t *mask, int weight)
+{
+	if (cpumask_weight(mask) == weight)
+		static_branch_enable_cpuslocked(&fast_misaligned_access_speed_key);
+	else
+		static_branch_disable_cpuslocked(&fast_misaligned_access_speed_key);
+}
+
+static void set_unaligned_access_static_branches_except_cpu(int cpu)
+{
+	/*
+	 * Same as set_unaligned_access_static_branches, except excludes the
+	 * given CPU from the result. When a CPU is hotplugged into an offline
+	 * state, this function is called before the CPU is set to offline in
+	 * the cpumask, and thus the CPU needs to be explicitly excluded.
+	 */
+
+	cpumask_t fast_except_me;
+
+	cpumask_and(&fast_except_me, &fast_misaligned_access, cpu_online_mask);
+	cpumask_clear_cpu(cpu, &fast_except_me);
+
+	modify_unaligned_access_branches(&fast_except_me, num_online_cpus() - 1);
+}
+
+static void set_unaligned_access_static_branches(void)
+{
+	/*
+	 * This will be called after check_unaligned_access_all_cpus so the
+	 * result of unaligned access speed for all CPUs will be available.
+	 *
+	 * To avoid the number of online cpus changing between reading
+	 * cpu_online_mask and calling num_online_cpus, cpus_read_lock must be
+	 * held before calling this function.
+	 */
+
+	cpumask_t fast_and_online;
+
+	cpumask_and(&fast_and_online, &fast_misaligned_access, cpu_online_mask);
+
+	modify_unaligned_access_branches(&fast_and_online, num_online_cpus());
+}
+
+static int lock_and_set_unaligned_access_static_branch(void)
+{
+	cpus_read_lock();
+	set_unaligned_access_static_branches();
+	cpus_read_unlock();
+
+	return 0;
+}
+
+arch_initcall_sync(lock_and_set_unaligned_access_static_branch);
+
 static int riscv_online_cpu(unsigned int cpu)
 {
 	static struct page *buf;
 
 	/* We are already set since the last check */
 	if (per_cpu(misaligned_access_speed, cpu) != RISCV_HWPROBE_MISALIGNED_UNKNOWN)
-		return 0;
+		goto exit;
 
 	buf = alloc_pages(GFP_KERNEL, MISALIGNED_BUFFER_ORDER);
 	if (!buf) {
@@ -671,6 +907,17 @@ static int riscv_online_cpu(unsigned int cpu)
 
 	check_unaligned_access(buf);
 	__free_pages(buf, MISALIGNED_BUFFER_ORDER);
+
+exit:
+	set_unaligned_access_static_branches();
+
+	return 0;
+}
+
+static int riscv_offline_cpu(unsigned int cpu)
+{
+	set_unaligned_access_static_branches_except_cpu(cpu);
+
 	return 0;
 }
 
@@ -705,9 +952,12 @@ static int check_unaligned_access_all_cpus(void)
 	/* Check core 0. */
 	smp_call_on_cpu(0, check_unaligned_access, bufs[0], true);
 
-	/* Setup hotplug callback for any new CPUs that come online. */
+	/*
+	 * Setup hotplug callbacks for any new CPUs that come online or go
+	 * offline.
+	 */
 	cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "riscv:online",
-				  riscv_online_cpu, NULL);
+				  riscv_online_cpu, riscv_offline_cpu);
 
 out:
 	unaligned_emulation_finish();
@@ -725,7 +975,7 @@ arch_initcall(check_unaligned_access_all_cpus);
 void riscv_user_isa_enable(void)
 {
 	if (riscv_cpu_has_extension_unlikely(smp_processor_id(), RISCV_ISA_EXT_ZICBOZ))
-		csr_set(CSR_SENVCFG, ENVCFG_CBZE);
+		csr_set(CSR_ENVCFG, ENVCFG_CBZE);
 }
 
 #ifdef CONFIG_RISCV_ALTERNATIVE
diff --git a/arch/riscv/kernel/efi.c b/arch/riscv/kernel/efi.c
index aa6209a74c83..b64bf1624a05 100644
--- a/arch/riscv/kernel/efi.c
+++ b/arch/riscv/kernel/efi.c
@@ -60,7 +60,7 @@ int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
 static int __init set_permissions(pte_t *ptep, unsigned long addr, void *data)
 {
 	efi_memory_desc_t *md = data;
-	pte_t pte = READ_ONCE(*ptep);
+	pte_t pte = ptep_get(ptep);
 	unsigned long val;
 
 	if (md->attribute & EFI_MEMORY_RO) {
diff --git a/arch/riscv/kernel/elf_kexec.c b/arch/riscv/kernel/elf_kexec.c
index e60fbd8660c4..5bd1ec3341fe 100644
--- a/arch/riscv/kernel/elf_kexec.c
+++ b/arch/riscv/kernel/elf_kexec.c
@@ -216,7 +216,6 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
 	if (ret)
 		goto out;
 	kernel_start = image->start;
-	pr_notice("The entry point of kernel at 0x%lx\n", image->start);
 
 	/* Add the kernel binary to the image */
 	ret = riscv_kexec_elf_load(image, &ehdr, &elf_info,
@@ -252,8 +251,8 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
 		image->elf_load_addr = kbuf.mem;
 		image->elf_headers_sz = headers_sz;
 
-		pr_debug("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-			 image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
+		kexec_dprintk("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			      image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
 
 		/* Setup cmdline for kdump kernel case */
 		modified_cmdline = setup_kdump_cmdline(image, cmdline,
@@ -275,6 +274,8 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
 		pr_err("Error loading purgatory ret=%d\n", ret);
 		goto out;
 	}
+	kexec_dprintk("Loaded purgatory at 0x%lx\n", kbuf.mem);
+
 	ret = kexec_purgatory_get_set_symbol(image, "riscv_kernel_entry",
 					     &kernel_start,
 					     sizeof(kernel_start), 0);
@@ -293,7 +294,7 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
 		if (ret)
 			goto out;
 		initrd_pbase = kbuf.mem;
-		pr_notice("Loaded initrd at 0x%lx\n", initrd_pbase);
+		kexec_dprintk("Loaded initrd at 0x%lx\n", initrd_pbase);
 	}
 
 	/* Add the DTB to the image */
@@ -318,7 +319,7 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
 	}
 	/* Cache the fdt buffer address for memory cleanup */
 	image->arch.fdt = fdt;
-	pr_notice("Loaded device tree at 0x%lx\n", kbuf.mem);
+	kexec_dprintk("Loaded device tree at 0x%lx\n", kbuf.mem);
 	goto out;
 
 out_free_fdt:
diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
index 54ca4564a926..9d1a305d5508 100644
--- a/arch/riscv/kernel/entry.S
+++ b/arch/riscv/kernel/entry.S
@@ -83,6 +83,10 @@ SYM_CODE_START(handle_exception)
 	/* Load the kernel shadow call stack pointer if coming from userspace */
 	scs_load_current_if_task_changed s5
 
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+	move a0, sp
+	call riscv_v_context_nesting_start
+#endif
 	move a0, sp /* pt_regs */
 	la ra, ret_from_exception
 
@@ -138,6 +142,10 @@ SYM_CODE_START_NOALIGN(ret_from_exception)
 	 */
 	csrw CSR_SCRATCH, tp
 1:
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+	move a0, sp
+	call riscv_v_context_nesting_end
+#endif
 	REG_L a0, PT_STATUS(sp)
 	/*
 	 * The current load reservation is effectively part of the processor's
diff --git a/arch/riscv/kernel/ftrace.c b/arch/riscv/kernel/ftrace.c
index 03a6434a8cdd..f5aa24d9e1c1 100644
--- a/arch/riscv/kernel/ftrace.c
+++ b/arch/riscv/kernel/ftrace.c
@@ -178,32 +178,28 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 }
 
 #ifdef CONFIG_DYNAMIC_FTRACE
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
+		       struct ftrace_ops *op, struct ftrace_regs *fregs)
+{
+	struct pt_regs *regs = arch_ftrace_get_regs(fregs);
+	unsigned long *parent = (unsigned long *)&regs->ra;
+
+	prepare_ftrace_return(parent, ip, frame_pointer(regs));
+}
+#else /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
 extern void ftrace_graph_call(void);
-extern void ftrace_graph_regs_call(void);
 int ftrace_enable_ftrace_graph_caller(void)
 {
-	int ret;
-
-	ret = __ftrace_modify_call((unsigned long)&ftrace_graph_call,
-				    (unsigned long)&prepare_ftrace_return, true, true);
-	if (ret)
-		return ret;
-
-	return __ftrace_modify_call((unsigned long)&ftrace_graph_regs_call,
+	return __ftrace_modify_call((unsigned long)&ftrace_graph_call,
 				    (unsigned long)&prepare_ftrace_return, true, true);
 }
 
 int ftrace_disable_ftrace_graph_caller(void)
 {
-	int ret;
-
-	ret = __ftrace_modify_call((unsigned long)&ftrace_graph_call,
-				    (unsigned long)&prepare_ftrace_return, false, true);
-	if (ret)
-		return ret;
-
-	return __ftrace_modify_call((unsigned long)&ftrace_graph_regs_call,
+	return __ftrace_modify_call((unsigned long)&ftrace_graph_call,
 				    (unsigned long)&prepare_ftrace_return, false, true);
 }
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
 #endif /* CONFIG_DYNAMIC_FTRACE */
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index 76ace1e0b46f..4236a69c35cb 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -11,7 +11,6 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/csr.h>
-#include <asm/cpu_ops_sbi.h>
 #include <asm/hwcap.h>
 #include <asm/image.h>
 #include <asm/scs.h>
@@ -89,6 +88,7 @@ relocate_enable_mmu:
 	/* Compute satp for kernel page tables, but don't load it yet */
 	srl a2, a0, PAGE_SHIFT
 	la a1, satp_mode
+	XIP_FIXUP_OFFSET a1
 	REG_L a1, 0(a1)
 	or a2, a2, a1
 
@@ -265,10 +265,12 @@ SYM_CODE_START(_start_kernel)
 	la sp, _end + THREAD_SIZE
 	XIP_FIXUP_OFFSET sp
 	mv s0, a0
+	mv s1, a1
 	call __copy_data
 
-	/* Restore a0 copy */
+	/* Restore a0 & a1 copy */
 	mv a0, s0
+	mv a1, s1
 #endif
 
 #ifndef CONFIG_XIP_KERNEL
diff --git a/arch/riscv/kernel/kernel_mode_vector.c b/arch/riscv/kernel/kernel_mode_vector.c
new file mode 100644
index 000000000000..6afe80c7f03a
--- /dev/null
+++ b/arch/riscv/kernel/kernel_mode_vector.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ * Copyright (C) 2017 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ * Copyright (C) 2021 SiFive
+ */
+#include <linux/compiler.h>
+#include <linux/irqflags.h>
+#include <linux/percpu.h>
+#include <linux/preempt.h>
+#include <linux/types.h>
+
+#include <asm/vector.h>
+#include <asm/switch_to.h>
+#include <asm/simd.h>
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+#include <asm/asm-prototypes.h>
+#endif
+
+static inline void riscv_v_flags_set(u32 flags)
+{
+	WRITE_ONCE(current->thread.riscv_v_flags, flags);
+}
+
+static inline void riscv_v_start(u32 flags)
+{
+	int orig;
+
+	orig = riscv_v_flags();
+	BUG_ON((orig & flags) != 0);
+	riscv_v_flags_set(orig | flags);
+	barrier();
+}
+
+static inline void riscv_v_stop(u32 flags)
+{
+	int orig;
+
+	barrier();
+	orig = riscv_v_flags();
+	BUG_ON((orig & flags) == 0);
+	riscv_v_flags_set(orig & ~flags);
+}
+
+/*
+ * Claim ownership of the CPU vector context for use by the calling context.
+ *
+ * The caller may freely manipulate the vector context metadata until
+ * put_cpu_vector_context() is called.
+ */
+void get_cpu_vector_context(void)
+{
+	/*
+	 * disable softirqs so it is impossible for softirqs to nest
+	 * get_cpu_vector_context() when kernel is actively using Vector.
+	 */
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+		local_bh_disable();
+	else
+		preempt_disable();
+
+	riscv_v_start(RISCV_KERNEL_MODE_V);
+}
+
+/*
+ * Release the CPU vector context.
+ *
+ * Must be called from a context in which get_cpu_vector_context() was
+ * previously called, with no call to put_cpu_vector_context() in the
+ * meantime.
+ */
+void put_cpu_vector_context(void)
+{
+	riscv_v_stop(RISCV_KERNEL_MODE_V);
+
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+		local_bh_enable();
+	else
+		preempt_enable();
+}
+
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+static __always_inline u32 *riscv_v_flags_ptr(void)
+{
+	return &current->thread.riscv_v_flags;
+}
+
+static inline void riscv_preempt_v_set_dirty(void)
+{
+	*riscv_v_flags_ptr() |= RISCV_PREEMPT_V_DIRTY;
+}
+
+static inline void riscv_preempt_v_reset_flags(void)
+{
+	*riscv_v_flags_ptr() &= ~(RISCV_PREEMPT_V_DIRTY | RISCV_PREEMPT_V_NEED_RESTORE);
+}
+
+static inline void riscv_v_ctx_depth_inc(void)
+{
+	*riscv_v_flags_ptr() += RISCV_V_CTX_UNIT_DEPTH;
+}
+
+static inline void riscv_v_ctx_depth_dec(void)
+{
+	*riscv_v_flags_ptr() -= RISCV_V_CTX_UNIT_DEPTH;
+}
+
+static inline u32 riscv_v_ctx_get_depth(void)
+{
+	return *riscv_v_flags_ptr() & RISCV_V_CTX_DEPTH_MASK;
+}
+
+static int riscv_v_stop_kernel_context(void)
+{
+	if (riscv_v_ctx_get_depth() != 0 || !riscv_preempt_v_started(current))
+		return 1;
+
+	riscv_preempt_v_clear_dirty(current);
+	riscv_v_stop(RISCV_PREEMPT_V);
+	return 0;
+}
+
+static int riscv_v_start_kernel_context(bool *is_nested)
+{
+	struct __riscv_v_ext_state *kvstate, *uvstate;
+
+	kvstate = &current->thread.kernel_vstate;
+	if (!kvstate->datap)
+		return -ENOENT;
+
+	if (riscv_preempt_v_started(current)) {
+		WARN_ON(riscv_v_ctx_get_depth() == 0);
+		*is_nested = true;
+		get_cpu_vector_context();
+		if (riscv_preempt_v_dirty(current)) {
+			__riscv_v_vstate_save(kvstate, kvstate->datap);
+			riscv_preempt_v_clear_dirty(current);
+		}
+		riscv_preempt_v_set_restore(current);
+		return 0;
+	}
+
+	/* Transfer the ownership of V from user to kernel, then save */
+	riscv_v_start(RISCV_PREEMPT_V | RISCV_PREEMPT_V_DIRTY);
+	if ((task_pt_regs(current)->status & SR_VS) == SR_VS_DIRTY) {
+		uvstate = &current->thread.vstate;
+		__riscv_v_vstate_save(uvstate, uvstate->datap);
+	}
+	riscv_preempt_v_clear_dirty(current);
+	return 0;
+}
+
+/* low-level V context handling code, called with irq disabled */
+asmlinkage void riscv_v_context_nesting_start(struct pt_regs *regs)
+{
+	int depth;
+
+	if (!riscv_preempt_v_started(current))
+		return;
+
+	depth = riscv_v_ctx_get_depth();
+	if (depth == 0 && (regs->status & SR_VS) == SR_VS_DIRTY)
+		riscv_preempt_v_set_dirty();
+
+	riscv_v_ctx_depth_inc();
+}
+
+asmlinkage void riscv_v_context_nesting_end(struct pt_regs *regs)
+{
+	struct __riscv_v_ext_state *vstate = &current->thread.kernel_vstate;
+	u32 depth;
+
+	WARN_ON(!irqs_disabled());
+
+	if (!riscv_preempt_v_started(current))
+		return;
+
+	riscv_v_ctx_depth_dec();
+	depth = riscv_v_ctx_get_depth();
+	if (depth == 0) {
+		if (riscv_preempt_v_restore(current)) {
+			__riscv_v_vstate_restore(vstate, vstate->datap);
+			__riscv_v_vstate_clean(regs);
+			riscv_preempt_v_reset_flags();
+		}
+	}
+}
+#else
+#define riscv_v_start_kernel_context(nested)	(-ENOENT)
+#define riscv_v_stop_kernel_context()		(-ENOENT)
+#endif /* CONFIG_RISCV_ISA_V_PREEMPTIVE */
+
+/*
+ * kernel_vector_begin(): obtain the CPU vector registers for use by the calling
+ * context
+ *
+ * Must not be called unless may_use_simd() returns true.
+ * Task context in the vector registers is saved back to memory as necessary.
+ *
+ * A matching call to kernel_vector_end() must be made before returning from the
+ * calling context.
+ *
+ * The caller may freely use the vector registers until kernel_vector_end() is
+ * called.
+ */
+void kernel_vector_begin(void)
+{
+	bool nested = false;
+
+	if (WARN_ON(!has_vector()))
+		return;
+
+	BUG_ON(!may_use_simd());
+
+	if (riscv_v_start_kernel_context(&nested)) {
+		get_cpu_vector_context();
+		riscv_v_vstate_save(&current->thread.vstate, task_pt_regs(current));
+	}
+
+	if (!nested)
+		riscv_v_vstate_set_restore(current, task_pt_regs(current));
+
+	riscv_v_enable();
+}
+EXPORT_SYMBOL_GPL(kernel_vector_begin);
+
+/*
+ * kernel_vector_end(): give the CPU vector registers back to the current task
+ *
+ * Must be called from a context in which kernel_vector_begin() was previously
+ * called, with no call to kernel_vector_end() in the meantime.
+ *
+ * The caller must not use the vector registers after this function is called,
+ * unless kernel_vector_begin() is called again in the meantime.
+ */
+void kernel_vector_end(void)
+{
+	if (WARN_ON(!has_vector()))
+		return;
+
+	riscv_v_disable();
+
+	if (riscv_v_stop_kernel_context())
+		put_cpu_vector_context();
+}
+EXPORT_SYMBOL_GPL(kernel_vector_end);
diff --git a/arch/riscv/kernel/machine_kexec.c b/arch/riscv/kernel/machine_kexec.c
index 2d139b724bc8..ed9cad20c039 100644
--- a/arch/riscv/kernel/machine_kexec.c
+++ b/arch/riscv/kernel/machine_kexec.c
@@ -19,30 +19,6 @@
 #include <linux/irq.h>
 
 /*
- * kexec_image_info - Print received image details
- */
-static void
-kexec_image_info(const struct kimage *image)
-{
-	unsigned long i;
-
-	pr_debug("Kexec image info:\n");
-	pr_debug("\ttype:        %d\n", image->type);
-	pr_debug("\tstart:       %lx\n", image->start);
-	pr_debug("\thead:        %lx\n", image->head);
-	pr_debug("\tnr_segments: %lu\n", image->nr_segments);
-
-	for (i = 0; i < image->nr_segments; i++) {
-		pr_debug("\t    segment[%lu]: %016lx - %016lx", i,
-			image->segment[i].mem,
-			image->segment[i].mem + image->segment[i].memsz);
-		pr_debug("\t\t0x%lx bytes, %lu pages\n",
-			(unsigned long) image->segment[i].memsz,
-			(unsigned long) image->segment[i].memsz /  PAGE_SIZE);
-	}
-}
-
-/*
  * machine_kexec_prepare - Initialize kexec
  *
  * This function is called from do_kexec_load, when the user has
@@ -60,8 +36,6 @@ machine_kexec_prepare(struct kimage *image)
 	unsigned int control_code_buffer_sz = 0;
 	int i = 0;
 
-	kexec_image_info(image);
-
 	/* Find the Flattened Device Tree and save its physical address */
 	for (i = 0; i < image->nr_segments; i++) {
 		if (image->segment[i].memsz <= sizeof(fdt))
diff --git a/arch/riscv/kernel/mcount-dyn.S b/arch/riscv/kernel/mcount-dyn.S
index 58dd96a2a153..b7561288e8da 100644
--- a/arch/riscv/kernel/mcount-dyn.S
+++ b/arch/riscv/kernel/mcount-dyn.S
@@ -3,12 +3,12 @@
 
 #include <linux/init.h>
 #include <linux/linkage.h>
+#include <linux/export.h>
 #include <asm/asm.h>
 #include <asm/csr.h>
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
-#include <asm-generic/export.h>
 #include <asm/ftrace.h>
 
 	.text
@@ -57,31 +57,150 @@
 	.endm
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
-	.macro SAVE_ALL
+
+/**
+* SAVE_ABI_REGS - save regs against the pt_regs struct
+*
+* @all: tell if saving all the regs
+*
+* If all is set, all the regs will be saved, otherwise only ABI
+* related regs (a0-a7,epc,ra and optional s0) will be saved.
+*
+* After the stack is established,
+*
+* 0(sp) stores the PC of the traced function which can be accessed
+* by &(fregs)->regs->epc in tracing function. Note that the real
+* function entry address should be computed with -FENTRY_RA_OFFSET.
+*
+* 8(sp) stores the function return address (i.e. parent IP) that
+* can be accessed by &(fregs)->regs->ra in tracing function.
+*
+* The other regs are saved at the respective localtion and accessed
+* by the respective pt_regs member.
+*
+* Here is the layout of stack for your reference.
+*
+* PT_SIZE_ON_STACK  ->  +++++++++
+*                       + ..... +
+*                       + t3-t6 +
+*                       + s2-s11+
+*                       + a0-a7 + --++++-> ftrace_caller saved
+*                       + s1    +   +
+*                       + s0    + --+
+*                       + t0-t2 +   +
+*                       + tp    +   +
+*                       + gp    +   +
+*                       + sp    +   +
+*                       + ra    + --+ // parent IP
+*               sp  ->  + epc   + --+ // PC
+*                       +++++++++
+**/
+	.macro SAVE_ABI_REGS, all=0
 	addi	sp, sp, -PT_SIZE_ON_STACK
 
-	REG_S t0,  PT_EPC(sp)
-	REG_S x1,  PT_RA(sp)
-	REG_S x2,  PT_SP(sp)
-	REG_S x3,  PT_GP(sp)
-	REG_S x4,  PT_TP(sp)
-	REG_S x5,  PT_T0(sp)
-	save_from_x6_to_x31
+	REG_S	t0,  PT_EPC(sp)
+	REG_S	x1,  PT_RA(sp)
+
+	// save the ABI regs
+
+	REG_S	x10, PT_A0(sp)
+	REG_S	x11, PT_A1(sp)
+	REG_S	x12, PT_A2(sp)
+	REG_S	x13, PT_A3(sp)
+	REG_S	x14, PT_A4(sp)
+	REG_S	x15, PT_A5(sp)
+	REG_S	x16, PT_A6(sp)
+	REG_S	x17, PT_A7(sp)
+
+	// save the leftover regs
+
+	.if \all == 1
+	REG_S	x2, PT_SP(sp)
+	REG_S	x3, PT_GP(sp)
+	REG_S	x4, PT_TP(sp)
+	REG_S	x5, PT_T0(sp)
+	REG_S	x6, PT_T1(sp)
+	REG_S	x7, PT_T2(sp)
+	REG_S	x8, PT_S0(sp)
+	REG_S	x9, PT_S1(sp)
+	REG_S	x18, PT_S2(sp)
+	REG_S	x19, PT_S3(sp)
+	REG_S	x20, PT_S4(sp)
+	REG_S	x21, PT_S5(sp)
+	REG_S	x22, PT_S6(sp)
+	REG_S	x23, PT_S7(sp)
+	REG_S	x24, PT_S8(sp)
+	REG_S	x25, PT_S9(sp)
+	REG_S	x26, PT_S10(sp)
+	REG_S	x27, PT_S11(sp)
+	REG_S	x28, PT_T3(sp)
+	REG_S	x29, PT_T4(sp)
+	REG_S	x30, PT_T5(sp)
+	REG_S	x31, PT_T6(sp)
+
+	// save s0 if FP_TEST defined
+
+	.else
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	REG_S	x8, PT_S0(sp)
+#endif
+	.endif
 	.endm
 
-	.macro RESTORE_ALL
-	REG_L x1,  PT_RA(sp)
-	REG_L x2,  PT_SP(sp)
-	REG_L x3,  PT_GP(sp)
-	REG_L x4,  PT_TP(sp)
-	/* Restore t0 with PT_EPC */
-	REG_L x5,  PT_EPC(sp)
-	restore_from_x6_to_x31
+	.macro RESTORE_ABI_REGS, all=0
+	REG_L	t0, PT_EPC(sp)
+	REG_L	x1, PT_RA(sp)
+	REG_L	x10, PT_A0(sp)
+	REG_L	x11, PT_A1(sp)
+	REG_L	x12, PT_A2(sp)
+	REG_L	x13, PT_A3(sp)
+	REG_L	x14, PT_A4(sp)
+	REG_L	x15, PT_A5(sp)
+	REG_L	x16, PT_A6(sp)
+	REG_L	x17, PT_A7(sp)
 
+	.if \all == 1
+	REG_L	x2, PT_SP(sp)
+	REG_L	x3, PT_GP(sp)
+	REG_L	x4, PT_TP(sp)
+	REG_L	x6, PT_T1(sp)
+	REG_L	x7, PT_T2(sp)
+	REG_L	x8, PT_S0(sp)
+	REG_L	x9, PT_S1(sp)
+	REG_L	x18, PT_S2(sp)
+	REG_L	x19, PT_S3(sp)
+	REG_L	x20, PT_S4(sp)
+	REG_L	x21, PT_S5(sp)
+	REG_L	x22, PT_S6(sp)
+	REG_L	x23, PT_S7(sp)
+	REG_L	x24, PT_S8(sp)
+	REG_L	x25, PT_S9(sp)
+	REG_L	x26, PT_S10(sp)
+	REG_L	x27, PT_S11(sp)
+	REG_L	x28, PT_T3(sp)
+	REG_L	x29, PT_T4(sp)
+	REG_L	x30, PT_T5(sp)
+	REG_L	x31, PT_T6(sp)
+
+	.else
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	REG_L	x8, PT_S0(sp)
+#endif
+	.endif
 	addi	sp, sp, PT_SIZE_ON_STACK
 	.endm
+
+	.macro PREPARE_ARGS
+	addi	a0, t0, -FENTRY_RA_OFFSET
+	la	a1, function_trace_op
+	REG_L	a2, 0(a1)
+	mv	a1, ra
+	mv	a3, sp
+	.endm
+
 #endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
 
+#ifndef CONFIG_DYNAMIC_FTRACE_WITH_REGS
 SYM_FUNC_START(ftrace_caller)
 	SAVE_ABI
 
@@ -105,34 +224,39 @@ SYM_INNER_LABEL(ftrace_graph_call, SYM_L_GLOBAL)
 	call	ftrace_stub
 #endif
 	RESTORE_ABI
-	jr t0
+	jr	t0
 SYM_FUNC_END(ftrace_caller)
 
-#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+#else /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
 SYM_FUNC_START(ftrace_regs_caller)
-	SAVE_ALL
-
-	addi	a0, t0, -FENTRY_RA_OFFSET
-	la	a1, function_trace_op
-	REG_L	a2, 0(a1)
-	mv	a1, ra
-	mv	a3, sp
+	mv	t1, zero
+	SAVE_ABI_REGS 1
+	PREPARE_ARGS
 
 SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL)
 	call	ftrace_stub
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	addi	a0, sp, PT_RA
-	REG_L	a1, PT_EPC(sp)
-	addi	a1, a1, -FENTRY_RA_OFFSET
-#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	mv	a2, s0
-#endif
-SYM_INNER_LABEL(ftrace_graph_regs_call, SYM_L_GLOBAL)
+	RESTORE_ABI_REGS 1
+	bnez	t1, .Ldirect
+	jr	t0
+.Ldirect:
+	jr	t1
+SYM_FUNC_END(ftrace_regs_caller)
+
+SYM_FUNC_START(ftrace_caller)
+	SAVE_ABI_REGS 0
+	PREPARE_ARGS
+
+SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
 	call	ftrace_stub
-#endif
 
-	RESTORE_ALL
-	jr t0
-SYM_FUNC_END(ftrace_regs_caller)
+	RESTORE_ABI_REGS 0
+	jr	t0
+SYM_FUNC_END(ftrace_caller)
 #endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+SYM_CODE_START(ftrace_stub_direct_tramp)
+	jr	t0
+SYM_CODE_END(ftrace_stub_direct_tramp)
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
diff --git a/arch/riscv/kernel/mcount.S b/arch/riscv/kernel/mcount.S
index b4dd9ed6849e..d7ec69ac6910 100644
--- a/arch/riscv/kernel/mcount.S
+++ b/arch/riscv/kernel/mcount.S
@@ -4,12 +4,12 @@
 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <linux/cfi_types.h>
+#include <linux/export.h>
 #include <asm/asm.h>
 #include <asm/csr.h>
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
-#include <asm-generic/export.h>
 #include <asm/ftrace.h>
 
 	.text
diff --git a/arch/riscv/kernel/module.c b/arch/riscv/kernel/module.c
index aac019ed63b1..5e5a82644451 100644
--- a/arch/riscv/kernel/module.c
+++ b/arch/riscv/kernel/module.c
@@ -723,8 +723,8 @@ static int add_relocation_to_accumulate(struct module *me, int type,
 
 			if (!bucket) {
 				kfree(entry);
-				kfree(rel_head);
 				kfree(rel_head->rel_entry);
+				kfree(rel_head);
 				return -ENOMEM;
 			}
 
@@ -747,6 +747,10 @@ initialize_relocation_hashtable(unsigned int num_relocations,
 {
 	/* Can safely assume that bits is not greater than sizeof(long) */
 	unsigned long hashtable_size = roundup_pow_of_two(num_relocations);
+	/*
+	 * When hashtable_size == 1, hashtable_bits == 0.
+	 * This is valid because the hashing algorithm returns 0 in this case.
+	 */
 	unsigned int hashtable_bits = ilog2(hashtable_size);
 
 	/*
@@ -760,10 +764,10 @@ initialize_relocation_hashtable(unsigned int num_relocations,
 	hashtable_size <<= should_double_size;
 
 	*relocation_hashtable = kmalloc_array(hashtable_size,
-					      sizeof(*relocation_hashtable),
+					      sizeof(**relocation_hashtable),
 					      GFP_KERNEL);
 	if (!*relocation_hashtable)
-		return -ENOMEM;
+		return 0;
 
 	__hash_init(*relocation_hashtable, hashtable_size);
 
@@ -779,6 +783,7 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 	Elf_Sym *sym;
 	void *location;
 	unsigned int i, type;
+	unsigned int j_idx = 0;
 	Elf_Addr v;
 	int res;
 	unsigned int num_relocations = sechdrs[relsec].sh_size / sizeof(*rel);
@@ -789,8 +794,8 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 	hashtable_bits = initialize_relocation_hashtable(num_relocations,
 							 &relocation_hashtable);
 
-	if (hashtable_bits < 0)
-		return hashtable_bits;
+	if (!relocation_hashtable)
+		return -ENOMEM;
 
 	INIT_LIST_HEAD(&used_buckets_list);
 
@@ -829,9 +834,10 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 		v = sym->st_value + rel[i].r_addend;
 
 		if (type == R_RISCV_PCREL_LO12_I || type == R_RISCV_PCREL_LO12_S) {
-			unsigned int j;
+			unsigned int j = j_idx;
+			bool found = false;
 
-			for (j = 0; j < sechdrs[relsec].sh_size / sizeof(*rel); j++) {
+			do {
 				unsigned long hi20_loc =
 					sechdrs[sechdrs[relsec].sh_info].sh_addr
 					+ rel[j].r_offset;
@@ -860,16 +866,26 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 					hi20 = (offset + 0x800) & 0xfffff000;
 					lo12 = offset - hi20;
 					v = lo12;
+					found = true;
 
 					break;
 				}
-			}
-			if (j == sechdrs[relsec].sh_size / sizeof(*rel)) {
+
+				j++;
+				if (j > sechdrs[relsec].sh_size / sizeof(*rel))
+					j = 0;
+
+			} while (j_idx != j);
+
+			if (!found) {
 				pr_err(
 				  "%s: Can not find HI20 relocation information\n",
 				  me->name);
 				return -EINVAL;
 			}
+
+			/* Record the previous j-loop end index */
+			j_idx = j;
 		}
 
 		if (reloc_handlers[type].accumulate_handler)
@@ -894,7 +910,8 @@ void *module_alloc(unsigned long size)
 {
 	return __vmalloc_node_range(size, 1, MODULES_VADDR,
 				    MODULES_END, GFP_KERNEL,
-				    PAGE_KERNEL, 0, NUMA_NO_NODE,
+				    PAGE_KERNEL, VM_FLUSH_RESET_PERMS,
+				    NUMA_NO_NODE,
 				    __builtin_return_address(0));
 }
 #endif
diff --git a/arch/riscv/kernel/paravirt.c b/arch/riscv/kernel/paravirt.c
new file mode 100644
index 000000000000..0d6225fd3194
--- /dev/null
+++ b/arch/riscv/kernel/paravirt.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023 Ventana Micro Systems Inc.
+ */
+
+#define pr_fmt(fmt) "riscv-pv: " fmt
+
+#include <linux/cpuhotplug.h>
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/jump_label.h>
+#include <linux/kconfig.h>
+#include <linux/kernel.h>
+#include <linux/percpu-defs.h>
+#include <linux/printk.h>
+#include <linux/static_call.h>
+#include <linux/types.h>
+
+#include <asm/barrier.h>
+#include <asm/page.h>
+#include <asm/paravirt.h>
+#include <asm/sbi.h>
+
+struct static_key paravirt_steal_enabled;
+struct static_key paravirt_steal_rq_enabled;
+
+static u64 native_steal_clock(int cpu)
+{
+	return 0;
+}
+
+DEFINE_STATIC_CALL(pv_steal_clock, native_steal_clock);
+
+static bool steal_acc = true;
+static int __init parse_no_stealacc(char *arg)
+{
+	steal_acc = false;
+	return 0;
+}
+
+early_param("no-steal-acc", parse_no_stealacc);
+
+static DEFINE_PER_CPU(struct sbi_sta_struct, steal_time) __aligned(64);
+
+static bool __init has_pv_steal_clock(void)
+{
+	if (sbi_spec_version >= sbi_mk_version(2, 0) &&
+	    sbi_probe_extension(SBI_EXT_STA) > 0) {
+		pr_info("SBI STA extension detected\n");
+		return true;
+	}
+
+	return false;
+}
+
+static int sbi_sta_steal_time_set_shmem(unsigned long lo, unsigned long hi,
+					unsigned long flags)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_STA, SBI_EXT_STA_STEAL_TIME_SET_SHMEM,
+			lo, hi, flags, 0, 0, 0);
+	if (ret.error) {
+		if (lo == SBI_STA_SHMEM_DISABLE && hi == SBI_STA_SHMEM_DISABLE)
+			pr_warn("Failed to disable steal-time shmem");
+		else
+			pr_warn("Failed to set steal-time shmem");
+		return sbi_err_map_linux_errno(ret.error);
+	}
+
+	return 0;
+}
+
+static int pv_time_cpu_online(unsigned int cpu)
+{
+	struct sbi_sta_struct *st = this_cpu_ptr(&steal_time);
+	phys_addr_t pa = __pa(st);
+	unsigned long lo = (unsigned long)pa;
+	unsigned long hi = IS_ENABLED(CONFIG_32BIT) ? upper_32_bits((u64)pa) : 0;
+
+	return sbi_sta_steal_time_set_shmem(lo, hi, 0);
+}
+
+static int pv_time_cpu_down_prepare(unsigned int cpu)
+{
+	return sbi_sta_steal_time_set_shmem(SBI_STA_SHMEM_DISABLE,
+					    SBI_STA_SHMEM_DISABLE, 0);
+}
+
+static u64 pv_time_steal_clock(int cpu)
+{
+	struct sbi_sta_struct *st = per_cpu_ptr(&steal_time, cpu);
+	__le32 sequence;
+	__le64 steal;
+
+	/*
+	 * Check the sequence field before and after reading the steal
+	 * field. Repeat the read if it is different or odd.
+	 */
+	do {
+		sequence = READ_ONCE(st->sequence);
+		virt_rmb();
+		steal = READ_ONCE(st->steal);
+		virt_rmb();
+	} while ((le32_to_cpu(sequence) & 1) ||
+		 sequence != READ_ONCE(st->sequence));
+
+	return le64_to_cpu(steal);
+}
+
+int __init pv_time_init(void)
+{
+	int ret;
+
+	if (!has_pv_steal_clock())
+		return 0;
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+				"riscv/pv_time:online",
+				pv_time_cpu_online,
+				pv_time_cpu_down_prepare);
+	if (ret < 0)
+		return ret;
+
+	static_call_update(pv_steal_clock, pv_time_steal_clock);
+
+	static_key_slow_inc(&paravirt_steal_enabled);
+	if (steal_acc)
+		static_key_slow_inc(&paravirt_steal_rq_enabled);
+
+	pr_info("Computing paravirt steal-time\n");
+
+	return 0;
+}
diff --git a/arch/riscv/kernel/patch.c b/arch/riscv/kernel/patch.c
index 13ee7bf589a1..37e87fdcf6a0 100644
--- a/arch/riscv/kernel/patch.c
+++ b/arch/riscv/kernel/patch.c
@@ -14,6 +14,7 @@
 #include <asm/fixmap.h>
 #include <asm/ftrace.h>
 #include <asm/patch.h>
+#include <asm/sections.h>
 
 struct patch_insn {
 	void *addr;
@@ -25,6 +26,14 @@ struct patch_insn {
 int riscv_patch_in_stop_machine = false;
 
 #ifdef CONFIG_MMU
+
+static inline bool is_kernel_exittext(uintptr_t addr)
+{
+	return system_state < SYSTEM_RUNNING &&
+		addr >= (uintptr_t)__exittext_begin &&
+		addr < (uintptr_t)__exittext_end;
+}
+
 /*
  * The fix_to_virt(, idx) needs a const value (not a dynamic variable of
  * reg-a0) or BUILD_BUG_ON failed with "idx >= __end_of_fixed_addresses".
@@ -35,7 +44,7 @@ static __always_inline void *patch_map(void *addr, const unsigned int fixmap)
 	uintptr_t uintaddr = (uintptr_t) addr;
 	struct page *page;
 
-	if (core_kernel_text(uintaddr))
+	if (core_kernel_text(uintaddr) || is_kernel_exittext(uintaddr))
 		page = phys_to_page(__pa_symbol(addr));
 	else if (IS_ENABLED(CONFIG_STRICT_MODULE_RWX))
 		page = vmalloc_to_page(addr);
diff --git a/arch/riscv/kernel/pi/cmdline_early.c b/arch/riscv/kernel/pi/cmdline_early.c
index 68e786c84c94..f6d4dedffb84 100644
--- a/arch/riscv/kernel/pi/cmdline_early.c
+++ b/arch/riscv/kernel/pi/cmdline_early.c
@@ -38,8 +38,7 @@ static char *get_early_cmdline(uintptr_t dtb_pa)
 	if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) ||
 	    IS_ENABLED(CONFIG_CMDLINE_FORCE) ||
 	    fdt_cmdline_size == 0 /* CONFIG_CMDLINE_FALLBACK */) {
-		strncat(early_cmdline, CONFIG_CMDLINE,
-			COMMAND_LINE_SIZE - fdt_cmdline_size);
+		strlcat(early_cmdline, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
 	}
 
 	return early_cmdline;
diff --git a/arch/riscv/kernel/process.c b/arch/riscv/kernel/process.c
index 4f21d970a129..92922dbd5b5c 100644
--- a/arch/riscv/kernel/process.c
+++ b/arch/riscv/kernel/process.c
@@ -171,6 +171,7 @@ void flush_thread(void)
 	riscv_v_vstate_off(task_pt_regs(current));
 	kfree(current->thread.vstate.datap);
 	memset(&current->thread.vstate, 0, sizeof(struct __riscv_v_ext_state));
+	clear_tsk_thread_flag(current, TIF_RISCV_V_DEFER_RESTORE);
 #endif
 }
 
@@ -178,7 +179,7 @@ void arch_release_task_struct(struct task_struct *tsk)
 {
 	/* Free the vector context of datap. */
 	if (has_vector())
-		kfree(tsk->thread.vstate.datap);
+		riscv_v_thread_free(tsk);
 }
 
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
@@ -187,6 +188,8 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	*dst = *src;
 	/* clear entire V context, including datap for a new task */
 	memset(&dst->thread.vstate, 0, sizeof(struct __riscv_v_ext_state));
+	memset(&dst->thread.kernel_vstate, 0, sizeof(struct __riscv_v_ext_state));
+	clear_tsk_thread_flag(dst, TIF_RISCV_V_DEFER_RESTORE);
 
 	return 0;
 }
@@ -221,7 +224,15 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 		childregs->a0 = 0; /* Return value of fork() */
 		p->thread.s[0] = 0;
 	}
+	p->thread.riscv_v_flags = 0;
+	if (has_vector())
+		riscv_v_thread_alloc(p);
 	p->thread.ra = (unsigned long)ret_from_fork;
 	p->thread.sp = (unsigned long)childregs; /* kernel sp */
 	return 0;
 }
+
+void __init arch_task_cache_init(void)
+{
+	riscv_v_setup_ctx_cache();
+}
diff --git a/arch/riscv/kernel/ptrace.c b/arch/riscv/kernel/ptrace.c
index 2afe460de16a..e8515aa9d80b 100644
--- a/arch/riscv/kernel/ptrace.c
+++ b/arch/riscv/kernel/ptrace.c
@@ -99,8 +99,11 @@ static int riscv_vr_get(struct task_struct *target,
 	 * Ensure the vector registers have been saved to the memory before
 	 * copying them to membuf.
 	 */
-	if (target == current)
-		riscv_v_vstate_save(current, task_pt_regs(current));
+	if (target == current) {
+		get_cpu_vector_context();
+		riscv_v_vstate_save(&current->thread.vstate, task_pt_regs(current));
+		put_cpu_vector_context();
+	}
 
 	ptrace_vstate.vstart = vstate->vstart;
 	ptrace_vstate.vl = vstate->vl;
diff --git a/arch/riscv/kernel/return_address.c b/arch/riscv/kernel/return_address.c
new file mode 100644
index 000000000000..c8115ec8fb30
--- /dev/null
+++ b/arch/riscv/kernel/return_address.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This code come from arch/arm64/kernel/return_address.c
+ *
+ * Copyright (C) 2023 SiFive.
+ */
+
+#include <linux/export.h>
+#include <linux/kprobes.h>
+#include <linux/stacktrace.h>
+
+struct return_address_data {
+	unsigned int level;
+	void *addr;
+};
+
+static bool save_return_addr(void *d, unsigned long pc)
+{
+	struct return_address_data *data = d;
+
+	if (!data->level) {
+		data->addr = (void *)pc;
+		return false;
+	}
+
+	--data->level;
+
+	return true;
+}
+NOKPROBE_SYMBOL(save_return_addr);
+
+noinline void *return_address(unsigned int level)
+{
+	struct return_address_data data;
+
+	data.level = level + 3;
+	data.addr = NULL;
+
+	arch_stack_walk(save_return_addr, &data, current, NULL);
+
+	if (!data.level)
+		return data.addr;
+	else
+		return NULL;
+
+}
+EXPORT_SYMBOL_GPL(return_address);
+NOKPROBE_SYMBOL(return_address);
diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index 5a62ed1da453..e66e0999a800 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -7,6 +7,7 @@
 
 #include <linux/bits.h>
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <linux/pm.h>
 #include <linux/reboot.h>
 #include <asm/sbi.h>
@@ -571,6 +572,66 @@ long sbi_get_mimpid(void)
 }
 EXPORT_SYMBOL_GPL(sbi_get_mimpid);
 
+bool sbi_debug_console_available;
+
+int sbi_debug_console_write(const char *bytes, unsigned int num_bytes)
+{
+	phys_addr_t base_addr;
+	struct sbiret ret;
+
+	if (!sbi_debug_console_available)
+		return -EOPNOTSUPP;
+
+	if (is_vmalloc_addr(bytes))
+		base_addr = page_to_phys(vmalloc_to_page(bytes)) +
+			    offset_in_page(bytes);
+	else
+		base_addr = __pa(bytes);
+	if (PAGE_SIZE < (offset_in_page(bytes) + num_bytes))
+		num_bytes = PAGE_SIZE - offset_in_page(bytes);
+
+	if (IS_ENABLED(CONFIG_32BIT))
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
+				num_bytes, lower_32_bits(base_addr),
+				upper_32_bits(base_addr), 0, 0, 0);
+	else
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
+				num_bytes, base_addr, 0, 0, 0, 0);
+
+	if (ret.error == SBI_ERR_FAILURE)
+		return -EIO;
+	return ret.error ? sbi_err_map_linux_errno(ret.error) : ret.value;
+}
+
+int sbi_debug_console_read(char *bytes, unsigned int num_bytes)
+{
+	phys_addr_t base_addr;
+	struct sbiret ret;
+
+	if (!sbi_debug_console_available)
+		return -EOPNOTSUPP;
+
+	if (is_vmalloc_addr(bytes))
+		base_addr = page_to_phys(vmalloc_to_page(bytes)) +
+			    offset_in_page(bytes);
+	else
+		base_addr = __pa(bytes);
+	if (PAGE_SIZE < (offset_in_page(bytes) + num_bytes))
+		num_bytes = PAGE_SIZE - offset_in_page(bytes);
+
+	if (IS_ENABLED(CONFIG_32BIT))
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
+				num_bytes, lower_32_bits(base_addr),
+				upper_32_bits(base_addr), 0, 0, 0);
+	else
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
+				num_bytes, base_addr, 0, 0, 0, 0);
+
+	if (ret.error == SBI_ERR_FAILURE)
+		return -EIO;
+	return ret.error ? sbi_err_map_linux_errno(ret.error) : ret.value;
+}
+
 void __init sbi_init(void)
 {
 	int ret;
@@ -612,6 +673,11 @@ void __init sbi_init(void)
 			sbi_srst_reboot_nb.priority = 192;
 			register_restart_handler(&sbi_srst_reboot_nb);
 		}
+		if ((sbi_spec_version >= sbi_mk_version(2, 0)) &&
+		    (sbi_probe_extension(SBI_EXT_DBCN) > 0)) {
+			pr_info("SBI DBCN extension detected\n");
+			sbi_debug_console_available = true;
+		}
 	} else {
 		__sbi_set_timer = __sbi_set_timer_v01;
 		__sbi_send_ipi	= __sbi_send_ipi_v01;
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 535a837de55d..4f73c0ae44b2 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -26,7 +26,6 @@
 #include <asm/alternative.h>
 #include <asm/cacheflush.h>
 #include <asm/cpufeature.h>
-#include <asm/cpu_ops.h>
 #include <asm/early_ioremap.h>
 #include <asm/pgtable.h>
 #include <asm/setup.h>
@@ -51,7 +50,6 @@ atomic_t hart_lottery __section(".sdata")
 #endif
 ;
 unsigned long boot_cpu_hartid;
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
 /*
  * Place kernel memory regions on the resource tree so that
@@ -299,23 +297,10 @@ void __init setup_arch(char **cmdline_p)
 	riscv_user_isa_enable();
 }
 
-static int __init topology_init(void)
+bool arch_cpu_is_hotpluggable(int cpu)
 {
-	int i, ret;
-
-	for_each_possible_cpu(i) {
-		struct cpu *cpu = &per_cpu(cpu_devices, i);
-
-		cpu->hotpluggable = cpu_has_hotplug(i);
-		ret = register_cpu(cpu, i);
-		if (unlikely(ret))
-			pr_warn("Warning: %s: register_cpu %d failed (%d)\n",
-			       __func__, i, ret);
-	}
-
-	return 0;
+	return cpu_has_hotplug(cpu);
 }
-subsys_initcall(topology_init);
 
 void free_initmem(void)
 {
diff --git a/arch/riscv/kernel/signal.c b/arch/riscv/kernel/signal.c
index 88b6220b2608..501e66debf69 100644
--- a/arch/riscv/kernel/signal.c
+++ b/arch/riscv/kernel/signal.c
@@ -86,12 +86,15 @@ static long save_v_state(struct pt_regs *regs, void __user **sc_vec)
 	/* datap is designed to be 16 byte aligned for better performance */
 	WARN_ON(unlikely(!IS_ALIGNED((unsigned long)datap, 16)));
 
-	riscv_v_vstate_save(current, regs);
+	get_cpu_vector_context();
+	riscv_v_vstate_save(&current->thread.vstate, regs);
+	put_cpu_vector_context();
+
 	/* Copy everything of vstate but datap. */
 	err = __copy_to_user(&state->v_state, &current->thread.vstate,
 			     offsetof(struct __riscv_v_ext_state, datap));
 	/* Copy the pointer datap itself. */
-	err |= __put_user(datap, &state->v_state.datap);
+	err |= __put_user((__force void *)datap, &state->v_state.datap);
 	/* Copy the whole vector content to user space datap. */
 	err |= __copy_to_user(datap, current->thread.vstate.datap, riscv_v_vsize);
 	/* Copy magic to the user space after saving  all vector conetext */
@@ -134,7 +137,7 @@ static long __restore_v_state(struct pt_regs *regs, void __user *sc_vec)
 	if (unlikely(err))
 		return err;
 
-	riscv_v_vstate_restore(current, regs);
+	riscv_v_vstate_set_restore(current, regs);
 
 	return err;
 }
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 40420afbb1a0..45dd4035416e 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -81,7 +81,7 @@ static inline void ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs)
 
 #ifdef CONFIG_HOTPLUG_CPU
 	if (cpu_has_hotplug(cpu))
-		cpu_ops[cpu]->cpu_stop();
+		cpu_ops->cpu_stop();
 #endif
 
 	for(;;)
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index d162bf339beb..519b6bd946e5 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -49,7 +49,6 @@ void __init smp_prepare_boot_cpu(void)
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	int cpuid;
-	int ret;
 	unsigned int curr_cpuid;
 
 	init_cpu_topology();
@@ -66,11 +65,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for_each_possible_cpu(cpuid) {
 		if (cpuid == curr_cpuid)
 			continue;
-		if (cpu_ops[cpuid]->cpu_prepare) {
-			ret = cpu_ops[cpuid]->cpu_prepare(cpuid);
-			if (ret)
-				continue;
-		}
 		set_cpu_present(cpuid, true);
 		numa_store_cpu_info(cpuid);
 	}
@@ -125,18 +119,7 @@ static int __init acpi_parse_rintc(union acpi_subtable_headers *header, const un
 
 static void __init acpi_parse_and_init_cpus(void)
 {
-	int cpuid;
-
-	cpu_set_ops(0);
-
 	acpi_table_parse_madt(ACPI_MADT_TYPE_RINTC, acpi_parse_rintc, 0);
-
-	for (cpuid = 1; cpuid < nr_cpu_ids; cpuid++) {
-		if (cpuid_to_hartid_map(cpuid) != INVALID_HARTID) {
-			cpu_set_ops(cpuid);
-			set_cpu_possible(cpuid, true);
-		}
-	}
 }
 #else
 #define acpi_parse_and_init_cpus(...)	do { } while (0)
@@ -150,8 +133,6 @@ static void __init of_parse_and_init_cpus(void)
 	int cpuid = 1;
 	int rc;
 
-	cpu_set_ops(0);
-
 	for_each_of_cpu_node(dn) {
 		rc = riscv_early_of_processor_hartid(dn, &hart);
 		if (rc < 0)
@@ -179,27 +160,28 @@ static void __init of_parse_and_init_cpus(void)
 	if (cpuid > nr_cpu_ids)
 		pr_warn("Total number of cpus [%d] is greater than nr_cpus option value [%d]\n",
 			cpuid, nr_cpu_ids);
-
-	for (cpuid = 1; cpuid < nr_cpu_ids; cpuid++) {
-		if (cpuid_to_hartid_map(cpuid) != INVALID_HARTID) {
-			cpu_set_ops(cpuid);
-			set_cpu_possible(cpuid, true);
-		}
-	}
 }
 
 void __init setup_smp(void)
 {
+	int cpuid;
+
+	cpu_set_ops();
+
 	if (acpi_disabled)
 		of_parse_and_init_cpus();
 	else
 		acpi_parse_and_init_cpus();
+
+	for (cpuid = 1; cpuid < nr_cpu_ids; cpuid++)
+		if (cpuid_to_hartid_map(cpuid) != INVALID_HARTID)
+			set_cpu_possible(cpuid, true);
 }
 
 static int start_secondary_cpu(int cpu, struct task_struct *tidle)
 {
-	if (cpu_ops[cpu]->cpu_start)
-		return cpu_ops[cpu]->cpu_start(cpu, tidle);
+	if (cpu_ops->cpu_start)
+		return cpu_ops->cpu_start(cpu, tidle);
 
 	return -EOPNOTSUPP;
 }
diff --git a/arch/riscv/kernel/suspend.c b/arch/riscv/kernel/suspend.c
index 3c89b8ec69c4..299795341e8a 100644
--- a/arch/riscv/kernel/suspend.c
+++ b/arch/riscv/kernel/suspend.c
@@ -4,13 +4,19 @@
  * Copyright (c) 2022 Ventana Micro Systems Inc.
  */
 
+#define pr_fmt(fmt) "suspend: " fmt
+
 #include <linux/ftrace.h>
+#include <linux/suspend.h>
 #include <asm/csr.h>
+#include <asm/sbi.h>
 #include <asm/suspend.h>
 
 void suspend_save_csrs(struct suspend_context *context)
 {
 	context->scratch = csr_read(CSR_SCRATCH);
+	if (riscv_cpu_has_extension_unlikely(smp_processor_id(), RISCV_ISA_EXT_XLINUXENVCFG))
+		context->envcfg = csr_read(CSR_ENVCFG);
 	context->tvec = csr_read(CSR_TVEC);
 	context->ie = csr_read(CSR_IE);
 
@@ -32,6 +38,8 @@ void suspend_save_csrs(struct suspend_context *context)
 void suspend_restore_csrs(struct suspend_context *context)
 {
 	csr_write(CSR_SCRATCH, context->scratch);
+	if (riscv_cpu_has_extension_unlikely(smp_processor_id(), RISCV_ISA_EXT_XLINUXENVCFG))
+		csr_write(CSR_ENVCFG, context->envcfg);
 	csr_write(CSR_TVEC, context->tvec);
 	csr_write(CSR_IE, context->ie);
 
@@ -85,3 +93,43 @@ int cpu_suspend(unsigned long arg,
 
 	return rc;
 }
+
+#ifdef CONFIG_RISCV_SBI
+static int sbi_system_suspend(unsigned long sleep_type,
+			      unsigned long resume_addr,
+			      unsigned long opaque)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_SUSP, SBI_EXT_SUSP_SYSTEM_SUSPEND,
+			sleep_type, resume_addr, opaque, 0, 0, 0);
+	if (ret.error)
+		return sbi_err_map_linux_errno(ret.error);
+
+	return ret.value;
+}
+
+static int sbi_system_suspend_enter(suspend_state_t state)
+{
+	return cpu_suspend(SBI_SUSP_SLEEP_TYPE_SUSPEND_TO_RAM, sbi_system_suspend);
+}
+
+static const struct platform_suspend_ops sbi_system_suspend_ops = {
+	.valid = suspend_valid_only_mem,
+	.enter = sbi_system_suspend_enter,
+};
+
+static int __init sbi_system_suspend_init(void)
+{
+	if (sbi_spec_version >= sbi_mk_version(2, 0) &&
+	    sbi_probe_extension(SBI_EXT_SUSP) > 0) {
+		pr_info("SBI SUSP extension detected\n");
+		if (IS_ENABLED(CONFIG_SUSPEND))
+			suspend_set_ops(&sbi_system_suspend_ops);
+	}
+
+	return 0;
+}
+
+arch_initcall(sbi_system_suspend_init);
+#endif /* CONFIG_RISCV_SBI */
diff --git a/arch/riscv/kernel/sys_hwprobe.c b/arch/riscv/kernel/sys_hwprobe.c
new file mode 100644
index 000000000000..a7c56b41efd2
--- /dev/null
+++ b/arch/riscv/kernel/sys_hwprobe.c
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * The hwprobe interface, for allowing userspace to probe to see which features
+ * are supported by the hardware.  See Documentation/arch/riscv/hwprobe.rst for
+ * more details.
+ */
+#include <linux/syscalls.h>
+#include <asm/cacheflush.h>
+#include <asm/cpufeature.h>
+#include <asm/hwprobe.h>
+#include <asm/sbi.h>
+#include <asm/switch_to.h>
+#include <asm/uaccess.h>
+#include <asm/unistd.h>
+#include <asm/vector.h>
+#include <vdso/vsyscall.h>
+
+
+static void hwprobe_arch_id(struct riscv_hwprobe *pair,
+			    const struct cpumask *cpus)
+{
+	u64 id = -1ULL;
+	bool first = true;
+	int cpu;
+
+	for_each_cpu(cpu, cpus) {
+		u64 cpu_id;
+
+		switch (pair->key) {
+		case RISCV_HWPROBE_KEY_MVENDORID:
+			cpu_id = riscv_cached_mvendorid(cpu);
+			break;
+		case RISCV_HWPROBE_KEY_MIMPID:
+			cpu_id = riscv_cached_mimpid(cpu);
+			break;
+		case RISCV_HWPROBE_KEY_MARCHID:
+			cpu_id = riscv_cached_marchid(cpu);
+			break;
+		}
+
+		if (first) {
+			id = cpu_id;
+			first = false;
+		}
+
+		/*
+		 * If there's a mismatch for the given set, return -1 in the
+		 * value.
+		 */
+		if (id != cpu_id) {
+			id = -1ULL;
+			break;
+		}
+	}
+
+	pair->value = id;
+}
+
+static void hwprobe_isa_ext0(struct riscv_hwprobe *pair,
+			     const struct cpumask *cpus)
+{
+	int cpu;
+	u64 missing = 0;
+
+	pair->value = 0;
+	if (has_fpu())
+		pair->value |= RISCV_HWPROBE_IMA_FD;
+
+	if (riscv_isa_extension_available(NULL, c))
+		pair->value |= RISCV_HWPROBE_IMA_C;
+
+	if (has_vector())
+		pair->value |= RISCV_HWPROBE_IMA_V;
+
+	/*
+	 * Loop through and record extensions that 1) anyone has, and 2) anyone
+	 * doesn't have.
+	 */
+	for_each_cpu(cpu, cpus) {
+		struct riscv_isainfo *isainfo = &hart_isa[cpu];
+
+#define EXT_KEY(ext)									\
+	do {										\
+		if (__riscv_isa_extension_available(isainfo->isa, RISCV_ISA_EXT_##ext))	\
+			pair->value |= RISCV_HWPROBE_EXT_##ext;				\
+		else									\
+			missing |= RISCV_HWPROBE_EXT_##ext;				\
+	} while (false)
+
+		/*
+		 * Only use EXT_KEY() for extensions which can be exposed to userspace,
+		 * regardless of the kernel's configuration, as no other checks, besides
+		 * presence in the hart_isa bitmap, are made.
+		 */
+		EXT_KEY(ZBA);
+		EXT_KEY(ZBB);
+		EXT_KEY(ZBS);
+		EXT_KEY(ZICBOZ);
+		EXT_KEY(ZBC);
+
+		EXT_KEY(ZBKB);
+		EXT_KEY(ZBKC);
+		EXT_KEY(ZBKX);
+		EXT_KEY(ZKND);
+		EXT_KEY(ZKNE);
+		EXT_KEY(ZKNH);
+		EXT_KEY(ZKSED);
+		EXT_KEY(ZKSH);
+		EXT_KEY(ZKT);
+		EXT_KEY(ZIHINTNTL);
+		EXT_KEY(ZTSO);
+		EXT_KEY(ZACAS);
+		EXT_KEY(ZICOND);
+
+		if (has_vector()) {
+			EXT_KEY(ZVBB);
+			EXT_KEY(ZVBC);
+			EXT_KEY(ZVKB);
+			EXT_KEY(ZVKG);
+			EXT_KEY(ZVKNED);
+			EXT_KEY(ZVKNHA);
+			EXT_KEY(ZVKNHB);
+			EXT_KEY(ZVKSED);
+			EXT_KEY(ZVKSH);
+			EXT_KEY(ZVKT);
+			EXT_KEY(ZVFH);
+			EXT_KEY(ZVFHMIN);
+		}
+
+		if (has_fpu()) {
+			EXT_KEY(ZFH);
+			EXT_KEY(ZFHMIN);
+			EXT_KEY(ZFA);
+		}
+#undef EXT_KEY
+	}
+
+	/* Now turn off reporting features if any CPU is missing it. */
+	pair->value &= ~missing;
+}
+
+static bool hwprobe_ext0_has(const struct cpumask *cpus, unsigned long ext)
+{
+	struct riscv_hwprobe pair;
+
+	hwprobe_isa_ext0(&pair, cpus);
+	return (pair.value & ext);
+}
+
+static u64 hwprobe_misaligned(const struct cpumask *cpus)
+{
+	int cpu;
+	u64 perf = -1ULL;
+
+	for_each_cpu(cpu, cpus) {
+		int this_perf = per_cpu(misaligned_access_speed, cpu);
+
+		if (perf == -1ULL)
+			perf = this_perf;
+
+		if (perf != this_perf) {
+			perf = RISCV_HWPROBE_MISALIGNED_UNKNOWN;
+			break;
+		}
+	}
+
+	if (perf == -1ULL)
+		return RISCV_HWPROBE_MISALIGNED_UNKNOWN;
+
+	return perf;
+}
+
+static void hwprobe_one_pair(struct riscv_hwprobe *pair,
+			     const struct cpumask *cpus)
+{
+	switch (pair->key) {
+	case RISCV_HWPROBE_KEY_MVENDORID:
+	case RISCV_HWPROBE_KEY_MARCHID:
+	case RISCV_HWPROBE_KEY_MIMPID:
+		hwprobe_arch_id(pair, cpus);
+		break;
+	/*
+	 * The kernel already assumes that the base single-letter ISA
+	 * extensions are supported on all harts, and only supports the
+	 * IMA base, so just cheat a bit here and tell that to
+	 * userspace.
+	 */
+	case RISCV_HWPROBE_KEY_BASE_BEHAVIOR:
+		pair->value = RISCV_HWPROBE_BASE_BEHAVIOR_IMA;
+		break;
+
+	case RISCV_HWPROBE_KEY_IMA_EXT_0:
+		hwprobe_isa_ext0(pair, cpus);
+		break;
+
+	case RISCV_HWPROBE_KEY_CPUPERF_0:
+		pair->value = hwprobe_misaligned(cpus);
+		break;
+
+	case RISCV_HWPROBE_KEY_ZICBOZ_BLOCK_SIZE:
+		pair->value = 0;
+		if (hwprobe_ext0_has(cpus, RISCV_HWPROBE_EXT_ZICBOZ))
+			pair->value = riscv_cboz_block_size;
+		break;
+
+	/*
+	 * For forward compatibility, unknown keys don't fail the whole
+	 * call, but get their element key set to -1 and value set to 0
+	 * indicating they're unrecognized.
+	 */
+	default:
+		pair->key = -1;
+		pair->value = 0;
+		break;
+	}
+}
+
+static int hwprobe_get_values(struct riscv_hwprobe __user *pairs,
+			      size_t pair_count, size_t cpusetsize,
+			      unsigned long __user *cpus_user,
+			      unsigned int flags)
+{
+	size_t out;
+	int ret;
+	cpumask_t cpus;
+
+	/* Check the reserved flags. */
+	if (flags != 0)
+		return -EINVAL;
+
+	/*
+	 * The interface supports taking in a CPU mask, and returns values that
+	 * are consistent across that mask. Allow userspace to specify NULL and
+	 * 0 as a shortcut to all online CPUs.
+	 */
+	cpumask_clear(&cpus);
+	if (!cpusetsize && !cpus_user) {
+		cpumask_copy(&cpus, cpu_online_mask);
+	} else {
+		if (cpusetsize > cpumask_size())
+			cpusetsize = cpumask_size();
+
+		ret = copy_from_user(&cpus, cpus_user, cpusetsize);
+		if (ret)
+			return -EFAULT;
+
+		/*
+		 * Userspace must provide at least one online CPU, without that
+		 * there's no way to define what is supported.
+		 */
+		cpumask_and(&cpus, &cpus, cpu_online_mask);
+		if (cpumask_empty(&cpus))
+			return -EINVAL;
+	}
+
+	for (out = 0; out < pair_count; out++, pairs++) {
+		struct riscv_hwprobe pair;
+
+		if (get_user(pair.key, &pairs->key))
+			return -EFAULT;
+
+		pair.value = 0;
+		hwprobe_one_pair(&pair, &cpus);
+		ret = put_user(pair.key, &pairs->key);
+		if (ret == 0)
+			ret = put_user(pair.value, &pairs->value);
+
+		if (ret)
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int hwprobe_get_cpus(struct riscv_hwprobe __user *pairs,
+			    size_t pair_count, size_t cpusetsize,
+			    unsigned long __user *cpus_user,
+			    unsigned int flags)
+{
+	cpumask_t cpus, one_cpu;
+	bool clear_all = false;
+	size_t i;
+	int ret;
+
+	if (flags != RISCV_HWPROBE_WHICH_CPUS)
+		return -EINVAL;
+
+	if (!cpusetsize || !cpus_user)
+		return -EINVAL;
+
+	if (cpusetsize > cpumask_size())
+		cpusetsize = cpumask_size();
+
+	ret = copy_from_user(&cpus, cpus_user, cpusetsize);
+	if (ret)
+		return -EFAULT;
+
+	if (cpumask_empty(&cpus))
+		cpumask_copy(&cpus, cpu_online_mask);
+
+	cpumask_and(&cpus, &cpus, cpu_online_mask);
+
+	cpumask_clear(&one_cpu);
+
+	for (i = 0; i < pair_count; i++) {
+		struct riscv_hwprobe pair, tmp;
+		int cpu;
+
+		ret = copy_from_user(&pair, &pairs[i], sizeof(pair));
+		if (ret)
+			return -EFAULT;
+
+		if (!riscv_hwprobe_key_is_valid(pair.key)) {
+			clear_all = true;
+			pair = (struct riscv_hwprobe){ .key = -1, };
+			ret = copy_to_user(&pairs[i], &pair, sizeof(pair));
+			if (ret)
+				return -EFAULT;
+		}
+
+		if (clear_all)
+			continue;
+
+		tmp = (struct riscv_hwprobe){ .key = pair.key, };
+
+		for_each_cpu(cpu, &cpus) {
+			cpumask_set_cpu(cpu, &one_cpu);
+
+			hwprobe_one_pair(&tmp, &one_cpu);
+
+			if (!riscv_hwprobe_pair_cmp(&tmp, &pair))
+				cpumask_clear_cpu(cpu, &cpus);
+
+			cpumask_clear_cpu(cpu, &one_cpu);
+		}
+	}
+
+	if (clear_all)
+		cpumask_clear(&cpus);
+
+	ret = copy_to_user(cpus_user, &cpus, cpusetsize);
+	if (ret)
+		return -EFAULT;
+
+	return 0;
+}
+
+static int do_riscv_hwprobe(struct riscv_hwprobe __user *pairs,
+			    size_t pair_count, size_t cpusetsize,
+			    unsigned long __user *cpus_user,
+			    unsigned int flags)
+{
+	if (flags & RISCV_HWPROBE_WHICH_CPUS)
+		return hwprobe_get_cpus(pairs, pair_count, cpusetsize,
+					cpus_user, flags);
+
+	return hwprobe_get_values(pairs, pair_count, cpusetsize,
+				  cpus_user, flags);
+}
+
+#ifdef CONFIG_MMU
+
+static int __init init_hwprobe_vdso_data(void)
+{
+	struct vdso_data *vd = __arch_get_k_vdso_data();
+	struct arch_vdso_data *avd = &vd->arch_data;
+	u64 id_bitsmash = 0;
+	struct riscv_hwprobe pair;
+	int key;
+
+	/*
+	 * Initialize vDSO data with the answers for the "all CPUs" case, to
+	 * save a syscall in the common case.
+	 */
+	for (key = 0; key <= RISCV_HWPROBE_MAX_KEY; key++) {
+		pair.key = key;
+		hwprobe_one_pair(&pair, cpu_online_mask);
+
+		WARN_ON_ONCE(pair.key < 0);
+
+		avd->all_cpu_hwprobe_values[key] = pair.value;
+		/*
+		 * Smash together the vendor, arch, and impl IDs to see if
+		 * they're all 0 or any negative.
+		 */
+		if (key <= RISCV_HWPROBE_KEY_MIMPID)
+			id_bitsmash |= pair.value;
+	}
+
+	/*
+	 * If the arch, vendor, and implementation ID are all the same across
+	 * all harts, then assume all CPUs are the same, and allow the vDSO to
+	 * answer queries for arbitrary masks. However if all values are 0 (not
+	 * populated) or any value returns -1 (varies across CPUs), then the
+	 * vDSO should defer to the kernel for exotic cpu masks.
+	 */
+	avd->homogeneous_cpus = id_bitsmash != 0 && id_bitsmash != -1;
+	return 0;
+}
+
+arch_initcall_sync(init_hwprobe_vdso_data);
+
+#endif /* CONFIG_MMU */
+
+SYSCALL_DEFINE5(riscv_hwprobe, struct riscv_hwprobe __user *, pairs,
+		size_t, pair_count, size_t, cpusetsize, unsigned long __user *,
+		cpus, unsigned int, flags)
+{
+	return do_riscv_hwprobe(pairs, pair_count, cpusetsize,
+				cpus, flags);
+}
diff --git a/arch/riscv/kernel/sys_riscv.c b/arch/riscv/kernel/sys_riscv.c
index a2ca5b7756a5..f1c1416a9f1e 100644
--- a/arch/riscv/kernel/sys_riscv.c
+++ b/arch/riscv/kernel/sys_riscv.c
@@ -7,15 +7,7 @@
 
 #include <linux/syscalls.h>
 #include <asm/cacheflush.h>
-#include <asm/cpufeature.h>
-#include <asm/hwprobe.h>
-#include <asm/sbi.h>
-#include <asm/vector.h>
-#include <asm/switch_to.h>
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
 #include <asm-generic/mman-common.h>
-#include <vdso/vsyscall.h>
 
 static long riscv_sys_mmap(unsigned long addr, unsigned long len,
 			   unsigned long prot, unsigned long flags,
@@ -77,283 +69,6 @@ SYSCALL_DEFINE3(riscv_flush_icache, uintptr_t, start, uintptr_t, end,
 	return 0;
 }
 
-/*
- * The hwprobe interface, for allowing userspace to probe to see which features
- * are supported by the hardware.  See Documentation/arch/riscv/hwprobe.rst for more
- * details.
- */
-static void hwprobe_arch_id(struct riscv_hwprobe *pair,
-			    const struct cpumask *cpus)
-{
-	u64 id = -1ULL;
-	bool first = true;
-	int cpu;
-
-	for_each_cpu(cpu, cpus) {
-		u64 cpu_id;
-
-		switch (pair->key) {
-		case RISCV_HWPROBE_KEY_MVENDORID:
-			cpu_id = riscv_cached_mvendorid(cpu);
-			break;
-		case RISCV_HWPROBE_KEY_MIMPID:
-			cpu_id = riscv_cached_mimpid(cpu);
-			break;
-		case RISCV_HWPROBE_KEY_MARCHID:
-			cpu_id = riscv_cached_marchid(cpu);
-			break;
-		}
-
-		if (first) {
-			id = cpu_id;
-			first = false;
-		}
-
-		/*
-		 * If there's a mismatch for the given set, return -1 in the
-		 * value.
-		 */
-		if (id != cpu_id) {
-			id = -1ULL;
-			break;
-		}
-	}
-
-	pair->value = id;
-}
-
-static void hwprobe_isa_ext0(struct riscv_hwprobe *pair,
-			     const struct cpumask *cpus)
-{
-	int cpu;
-	u64 missing = 0;
-
-	pair->value = 0;
-	if (has_fpu())
-		pair->value |= RISCV_HWPROBE_IMA_FD;
-
-	if (riscv_isa_extension_available(NULL, c))
-		pair->value |= RISCV_HWPROBE_IMA_C;
-
-	if (has_vector())
-		pair->value |= RISCV_HWPROBE_IMA_V;
-
-	/*
-	 * Loop through and record extensions that 1) anyone has, and 2) anyone
-	 * doesn't have.
-	 */
-	for_each_cpu(cpu, cpus) {
-		struct riscv_isainfo *isainfo = &hart_isa[cpu];
-
-#define EXT_KEY(ext)									\
-	do {										\
-		if (__riscv_isa_extension_available(isainfo->isa, RISCV_ISA_EXT_##ext))	\
-			pair->value |= RISCV_HWPROBE_EXT_##ext;				\
-		else									\
-			missing |= RISCV_HWPROBE_EXT_##ext;				\
-	} while (false)
-
-		/*
-		 * Only use EXT_KEY() for extensions which can be exposed to userspace,
-		 * regardless of the kernel's configuration, as no other checks, besides
-		 * presence in the hart_isa bitmap, are made.
-		 */
-		EXT_KEY(ZBA);
-		EXT_KEY(ZBB);
-		EXT_KEY(ZBS);
-		EXT_KEY(ZICBOZ);
-#undef EXT_KEY
-	}
-
-	/* Now turn off reporting features if any CPU is missing it. */
-	pair->value &= ~missing;
-}
-
-static bool hwprobe_ext0_has(const struct cpumask *cpus, u64 ext)
-{
-	struct riscv_hwprobe pair;
-
-	hwprobe_isa_ext0(&pair, cpus);
-	return (pair.value & ext);
-}
-
-static u64 hwprobe_misaligned(const struct cpumask *cpus)
-{
-	int cpu;
-	u64 perf = -1ULL;
-
-	for_each_cpu(cpu, cpus) {
-		int this_perf = per_cpu(misaligned_access_speed, cpu);
-
-		if (perf == -1ULL)
-			perf = this_perf;
-
-		if (perf != this_perf) {
-			perf = RISCV_HWPROBE_MISALIGNED_UNKNOWN;
-			break;
-		}
-	}
-
-	if (perf == -1ULL)
-		return RISCV_HWPROBE_MISALIGNED_UNKNOWN;
-
-	return perf;
-}
-
-static void hwprobe_one_pair(struct riscv_hwprobe *pair,
-			     const struct cpumask *cpus)
-{
-	switch (pair->key) {
-	case RISCV_HWPROBE_KEY_MVENDORID:
-	case RISCV_HWPROBE_KEY_MARCHID:
-	case RISCV_HWPROBE_KEY_MIMPID:
-		hwprobe_arch_id(pair, cpus);
-		break;
-	/*
-	 * The kernel already assumes that the base single-letter ISA
-	 * extensions are supported on all harts, and only supports the
-	 * IMA base, so just cheat a bit here and tell that to
-	 * userspace.
-	 */
-	case RISCV_HWPROBE_KEY_BASE_BEHAVIOR:
-		pair->value = RISCV_HWPROBE_BASE_BEHAVIOR_IMA;
-		break;
-
-	case RISCV_HWPROBE_KEY_IMA_EXT_0:
-		hwprobe_isa_ext0(pair, cpus);
-		break;
-
-	case RISCV_HWPROBE_KEY_CPUPERF_0:
-		pair->value = hwprobe_misaligned(cpus);
-		break;
-
-	case RISCV_HWPROBE_KEY_ZICBOZ_BLOCK_SIZE:
-		pair->value = 0;
-		if (hwprobe_ext0_has(cpus, RISCV_HWPROBE_EXT_ZICBOZ))
-			pair->value = riscv_cboz_block_size;
-		break;
-
-	/*
-	 * For forward compatibility, unknown keys don't fail the whole
-	 * call, but get their element key set to -1 and value set to 0
-	 * indicating they're unrecognized.
-	 */
-	default:
-		pair->key = -1;
-		pair->value = 0;
-		break;
-	}
-}
-
-static int do_riscv_hwprobe(struct riscv_hwprobe __user *pairs,
-			    size_t pair_count, size_t cpu_count,
-			    unsigned long __user *cpus_user,
-			    unsigned int flags)
-{
-	size_t out;
-	int ret;
-	cpumask_t cpus;
-
-	/* Check the reserved flags. */
-	if (flags != 0)
-		return -EINVAL;
-
-	/*
-	 * The interface supports taking in a CPU mask, and returns values that
-	 * are consistent across that mask. Allow userspace to specify NULL and
-	 * 0 as a shortcut to all online CPUs.
-	 */
-	cpumask_clear(&cpus);
-	if (!cpu_count && !cpus_user) {
-		cpumask_copy(&cpus, cpu_online_mask);
-	} else {
-		if (cpu_count > cpumask_size())
-			cpu_count = cpumask_size();
-
-		ret = copy_from_user(&cpus, cpus_user, cpu_count);
-		if (ret)
-			return -EFAULT;
-
-		/*
-		 * Userspace must provide at least one online CPU, without that
-		 * there's no way to define what is supported.
-		 */
-		cpumask_and(&cpus, &cpus, cpu_online_mask);
-		if (cpumask_empty(&cpus))
-			return -EINVAL;
-	}
-
-	for (out = 0; out < pair_count; out++, pairs++) {
-		struct riscv_hwprobe pair;
-
-		if (get_user(pair.key, &pairs->key))
-			return -EFAULT;
-
-		pair.value = 0;
-		hwprobe_one_pair(&pair, &cpus);
-		ret = put_user(pair.key, &pairs->key);
-		if (ret == 0)
-			ret = put_user(pair.value, &pairs->value);
-
-		if (ret)
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_MMU
-
-static int __init init_hwprobe_vdso_data(void)
-{
-	struct vdso_data *vd = __arch_get_k_vdso_data();
-	struct arch_vdso_data *avd = &vd->arch_data;
-	u64 id_bitsmash = 0;
-	struct riscv_hwprobe pair;
-	int key;
-
-	/*
-	 * Initialize vDSO data with the answers for the "all CPUs" case, to
-	 * save a syscall in the common case.
-	 */
-	for (key = 0; key <= RISCV_HWPROBE_MAX_KEY; key++) {
-		pair.key = key;
-		hwprobe_one_pair(&pair, cpu_online_mask);
-
-		WARN_ON_ONCE(pair.key < 0);
-
-		avd->all_cpu_hwprobe_values[key] = pair.value;
-		/*
-		 * Smash together the vendor, arch, and impl IDs to see if
-		 * they're all 0 or any negative.
-		 */
-		if (key <= RISCV_HWPROBE_KEY_MIMPID)
-			id_bitsmash |= pair.value;
-	}
-
-	/*
-	 * If the arch, vendor, and implementation ID are all the same across
-	 * all harts, then assume all CPUs are the same, and allow the vDSO to
-	 * answer queries for arbitrary masks. However if all values are 0 (not
-	 * populated) or any value returns -1 (varies across CPUs), then the
-	 * vDSO should defer to the kernel for exotic cpu masks.
-	 */
-	avd->homogeneous_cpus = id_bitsmash != 0 && id_bitsmash != -1;
-	return 0;
-}
-
-arch_initcall_sync(init_hwprobe_vdso_data);
-
-#endif /* CONFIG_MMU */
-
-SYSCALL_DEFINE5(riscv_hwprobe, struct riscv_hwprobe __user *, pairs,
-		size_t, pair_count, size_t, cpu_count, unsigned long __user *,
-		cpus, unsigned int, flags)
-{
-	return do_riscv_hwprobe(pairs, pair_count, cpu_count,
-				cpus, flags);
-}
-
 /* Not defined using SYSCALL_DEFINE0 to avoid error injection */
 asmlinkage long __riscv_sys_ni_syscall(const struct pt_regs *__unused)
 {
diff --git a/arch/riscv/kernel/time.c b/arch/riscv/kernel/time.c
index 23641e82a9df..ba3477197789 100644
--- a/arch/riscv/kernel/time.c
+++ b/arch/riscv/kernel/time.c
@@ -12,6 +12,7 @@
 #include <asm/sbi.h>
 #include <asm/processor.h>
 #include <asm/timex.h>
+#include <asm/paravirt.h>
 
 unsigned long riscv_timebase __ro_after_init;
 EXPORT_SYMBOL_GPL(riscv_timebase);
@@ -45,4 +46,6 @@ void __init time_init(void)
 	timer_probe();
 
 	tick_setup_hrtimer_broadcast();
+
+	pv_time_init();
 }
diff --git a/arch/riscv/kernel/traps_misaligned.c b/arch/riscv/kernel/traps_misaligned.c
index 5255f8134aef..8ded225e8c5b 100644
--- a/arch/riscv/kernel/traps_misaligned.c
+++ b/arch/riscv/kernel/traps_misaligned.c
@@ -319,7 +319,7 @@ static inline int get_insn(struct pt_regs *regs, ulong mepc, ulong *r_insn)
 static inline int load_u8(struct pt_regs *regs, const u8 *addr, u8 *r_val)
 {
 	if (user_mode(regs)) {
-		return __get_user(*r_val, addr);
+		return __get_user(*r_val, (u8 __user *)addr);
 	} else {
 		*r_val = *addr;
 		return 0;
@@ -329,7 +329,7 @@ static inline int load_u8(struct pt_regs *regs, const u8 *addr, u8 *r_val)
 static inline int store_u8(struct pt_regs *regs, u8 *addr, u8 val)
 {
 	if (user_mode(regs)) {
-		return __put_user(val, addr);
+		return __put_user(val, (u8 __user *)addr);
 	} else {
 		*addr = val;
 		return 0;
@@ -343,7 +343,7 @@ static inline int store_u8(struct pt_regs *regs, u8 *addr, u8 val)
 	if (user_mode(regs)) {				\
 		__ret = __get_user(insn, insn_addr);	\
 	} else {					\
-		insn = *insn_addr;			\
+		insn = *(__force u16 *)insn_addr;	\
 		__ret = 0;				\
 	}						\
 							\
diff --git a/arch/riscv/kernel/vdso/hwprobe.c b/arch/riscv/kernel/vdso/hwprobe.c
index cadf725ef798..1e926e4b5881 100644
--- a/arch/riscv/kernel/vdso/hwprobe.c
+++ b/arch/riscv/kernel/vdso/hwprobe.c
@@ -3,26 +3,22 @@
  * Copyright 2023 Rivos, Inc
  */
 
+#include <linux/string.h>
 #include <linux/types.h>
 #include <vdso/datapage.h>
 #include <vdso/helpers.h>
 
 extern int riscv_hwprobe(struct riscv_hwprobe *pairs, size_t pair_count,
-			 size_t cpu_count, unsigned long *cpus,
+			 size_t cpusetsize, unsigned long *cpus,
 			 unsigned int flags);
 
-/* Add a prototype to avoid -Wmissing-prototypes warning. */
-int __vdso_riscv_hwprobe(struct riscv_hwprobe *pairs, size_t pair_count,
-			 size_t cpu_count, unsigned long *cpus,
-			 unsigned int flags);
-
-int __vdso_riscv_hwprobe(struct riscv_hwprobe *pairs, size_t pair_count,
-			 size_t cpu_count, unsigned long *cpus,
-			 unsigned int flags)
+static int riscv_vdso_get_values(struct riscv_hwprobe *pairs, size_t pair_count,
+				 size_t cpusetsize, unsigned long *cpus,
+				 unsigned int flags)
 {
 	const struct vdso_data *vd = __arch_get_vdso_data();
 	const struct arch_vdso_data *avd = &vd->arch_data;
-	bool all_cpus = !cpu_count && !cpus;
+	bool all_cpus = !cpusetsize && !cpus;
 	struct riscv_hwprobe *p = pairs;
 	struct riscv_hwprobe *end = pairs + pair_count;
 
@@ -33,7 +29,7 @@ int __vdso_riscv_hwprobe(struct riscv_hwprobe *pairs, size_t pair_count,
 	 * masks.
 	 */
 	if ((flags != 0) || (!all_cpus && !avd->homogeneous_cpus))
-		return riscv_hwprobe(pairs, pair_count, cpu_count, cpus, flags);
+		return riscv_hwprobe(pairs, pair_count, cpusetsize, cpus, flags);
 
 	/* This is something we can handle, fill out the pairs. */
 	while (p < end) {
@@ -50,3 +46,71 @@ int __vdso_riscv_hwprobe(struct riscv_hwprobe *pairs, size_t pair_count,
 
 	return 0;
 }
+
+static int riscv_vdso_get_cpus(struct riscv_hwprobe *pairs, size_t pair_count,
+			       size_t cpusetsize, unsigned long *cpus,
+			       unsigned int flags)
+{
+	const struct vdso_data *vd = __arch_get_vdso_data();
+	const struct arch_vdso_data *avd = &vd->arch_data;
+	struct riscv_hwprobe *p = pairs;
+	struct riscv_hwprobe *end = pairs + pair_count;
+	unsigned char *c = (unsigned char *)cpus;
+	bool empty_cpus = true;
+	bool clear_all = false;
+	int i;
+
+	if (!cpusetsize || !cpus)
+		return -EINVAL;
+
+	for (i = 0; i < cpusetsize; i++) {
+		if (c[i]) {
+			empty_cpus = false;
+			break;
+		}
+	}
+
+	if (empty_cpus || flags != RISCV_HWPROBE_WHICH_CPUS || !avd->homogeneous_cpus)
+		return riscv_hwprobe(pairs, pair_count, cpusetsize, cpus, flags);
+
+	while (p < end) {
+		if (riscv_hwprobe_key_is_valid(p->key)) {
+			struct riscv_hwprobe t = {
+				.key = p->key,
+				.value = avd->all_cpu_hwprobe_values[p->key],
+			};
+
+			if (!riscv_hwprobe_pair_cmp(&t, p))
+				clear_all = true;
+		} else {
+			clear_all = true;
+			p->key = -1;
+			p->value = 0;
+		}
+		p++;
+	}
+
+	if (clear_all) {
+		for (i = 0; i < cpusetsize; i++)
+			c[i] = 0;
+	}
+
+	return 0;
+}
+
+/* Add a prototype to avoid -Wmissing-prototypes warning. */
+int __vdso_riscv_hwprobe(struct riscv_hwprobe *pairs, size_t pair_count,
+			 size_t cpusetsize, unsigned long *cpus,
+			 unsigned int flags);
+
+int __vdso_riscv_hwprobe(struct riscv_hwprobe *pairs, size_t pair_count,
+			 size_t cpusetsize, unsigned long *cpus,
+			 unsigned int flags)
+{
+	if (flags & RISCV_HWPROBE_WHICH_CPUS)
+		return riscv_vdso_get_cpus(pairs, pair_count, cpusetsize,
+					   cpus, flags);
+
+	return riscv_vdso_get_values(pairs, pair_count, cpusetsize,
+				     cpus, flags);
+}
diff --git a/arch/riscv/kernel/vdso/vgettimeofday.c b/arch/riscv/kernel/vdso/vgettimeofday.c
index cc0d80699c31..b35057802584 100644
--- a/arch/riscv/kernel/vdso/vgettimeofday.c
+++ b/arch/riscv/kernel/vdso/vgettimeofday.c
@@ -8,23 +8,18 @@
 
 #include <linux/time.h>
 #include <linux/types.h>
+#include <vdso/gettime.h>
 
-extern
-int __vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts);
 int __vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts)
 {
 	return __cvdso_clock_gettime(clock, ts);
 }
 
-extern
-int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz);
 int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz)
 {
 	return __cvdso_gettimeofday(tv, tz);
 }
 
-extern
-int __vdso_clock_getres(clockid_t clock_id, struct __kernel_timespec *res);
 int __vdso_clock_getres(clockid_t clock_id, struct __kernel_timespec *res)
 {
 	return __cvdso_clock_getres(clock_id, res);
diff --git a/arch/riscv/kernel/vector.c b/arch/riscv/kernel/vector.c
index 578b6292487e..6727d1d3b8f2 100644
--- a/arch/riscv/kernel/vector.c
+++ b/arch/riscv/kernel/vector.c
@@ -21,6 +21,10 @@
 #include <asm/bug.h>
 
 static bool riscv_v_implicit_uacc = IS_ENABLED(CONFIG_RISCV_ISA_V_DEFAULT_ENABLE);
+static struct kmem_cache *riscv_v_user_cachep;
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+static struct kmem_cache *riscv_v_kernel_cachep;
+#endif
 
 unsigned long riscv_v_vsize __read_mostly;
 EXPORT_SYMBOL_GPL(riscv_v_vsize);
@@ -47,6 +51,21 @@ int riscv_v_setup_vsize(void)
 	return 0;
 }
 
+void __init riscv_v_setup_ctx_cache(void)
+{
+	if (!has_vector())
+		return;
+
+	riscv_v_user_cachep = kmem_cache_create_usercopy("riscv_vector_ctx",
+							 riscv_v_vsize, 16, SLAB_PANIC,
+							 0, riscv_v_vsize, NULL);
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+	riscv_v_kernel_cachep = kmem_cache_create("riscv_vector_kctx",
+						  riscv_v_vsize, 16,
+						  SLAB_PANIC, NULL);
+#endif
+}
+
 static bool insn_is_vector(u32 insn_buf)
 {
 	u32 opcode = insn_buf & __INSN_OPCODE_MASK;
@@ -80,20 +99,37 @@ static bool insn_is_vector(u32 insn_buf)
 	return false;
 }
 
-static int riscv_v_thread_zalloc(void)
+static int riscv_v_thread_zalloc(struct kmem_cache *cache,
+				 struct __riscv_v_ext_state *ctx)
 {
 	void *datap;
 
-	datap = kzalloc(riscv_v_vsize, GFP_KERNEL);
+	datap = kmem_cache_zalloc(cache, GFP_KERNEL);
 	if (!datap)
 		return -ENOMEM;
 
-	current->thread.vstate.datap = datap;
-	memset(&current->thread.vstate, 0, offsetof(struct __riscv_v_ext_state,
-						    datap));
+	ctx->datap = datap;
+	memset(ctx, 0, offsetof(struct __riscv_v_ext_state, datap));
 	return 0;
 }
 
+void riscv_v_thread_alloc(struct task_struct *tsk)
+{
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+	riscv_v_thread_zalloc(riscv_v_kernel_cachep, &tsk->thread.kernel_vstate);
+#endif
+}
+
+void riscv_v_thread_free(struct task_struct *tsk)
+{
+	if (tsk->thread.vstate.datap)
+		kmem_cache_free(riscv_v_user_cachep, tsk->thread.vstate.datap);
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+	if (tsk->thread.kernel_vstate.datap)
+		kmem_cache_free(riscv_v_kernel_cachep, tsk->thread.kernel_vstate.datap);
+#endif
+}
+
 #define VSTATE_CTRL_GET_CUR(x) ((x) & PR_RISCV_V_VSTATE_CTRL_CUR_MASK)
 #define VSTATE_CTRL_GET_NEXT(x) (((x) & PR_RISCV_V_VSTATE_CTRL_NEXT_MASK) >> 2)
 #define VSTATE_CTRL_MAKE_NEXT(x) (((x) << 2) & PR_RISCV_V_VSTATE_CTRL_NEXT_MASK)
@@ -122,7 +158,8 @@ static inline void riscv_v_ctrl_set(struct task_struct *tsk, int cur, int nxt,
 	ctrl |= VSTATE_CTRL_MAKE_NEXT(nxt);
 	if (inherit)
 		ctrl |= PR_RISCV_V_VSTATE_CTRL_INHERIT;
-	tsk->thread.vstate_ctrl = ctrl;
+	tsk->thread.vstate_ctrl &= ~PR_RISCV_V_VSTATE_CTRL_MASK;
+	tsk->thread.vstate_ctrl |= ctrl;
 }
 
 bool riscv_v_vstate_ctrl_user_allowed(void)
@@ -162,12 +199,12 @@ bool riscv_v_first_use_handler(struct pt_regs *regs)
 	 * context where VS has been off. So, try to allocate the user's V
 	 * context and resume execution.
 	 */
-	if (riscv_v_thread_zalloc()) {
+	if (riscv_v_thread_zalloc(riscv_v_user_cachep, &current->thread.vstate)) {
 		force_sig(SIGBUS);
 		return true;
 	}
 	riscv_v_vstate_on(regs);
-	riscv_v_vstate_restore(current, regs);
+	riscv_v_vstate_set_restore(current, regs);
 	return true;
 }
 
diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S b/arch/riscv/kernel/vmlinux-xip.lds.S
index 50767647fbc6..8c3daa1b0531 100644
--- a/arch/riscv/kernel/vmlinux-xip.lds.S
+++ b/arch/riscv/kernel/vmlinux-xip.lds.S
@@ -29,10 +29,12 @@ SECTIONS
 	HEAD_TEXT_SECTION
 	INIT_TEXT_SECTION(PAGE_SIZE)
 	/* we have to discard exit text and such at runtime, not link time */
+	__exittext_begin = .;
 	.exit.text :
 	{
 		EXIT_TEXT
 	}
+	__exittext_end = .;
 
 	.text : {
 		_text = .;
diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
index 492dd4b8f3d6..002ca58dd998 100644
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@@ -69,10 +69,12 @@ SECTIONS
 		__soc_builtin_dtb_table_end = .;
 	}
 	/* we have to discard exit text and such at runtime, not link time */
+	__exittext_begin = .;
 	.exit.text :
 	{
 		EXIT_TEXT
 	}
+	__exittext_end = .;
 
 	__init_text_end = .;
 	. = ALIGN(SECTION_ALIGN);
diff --git a/arch/riscv/kvm/Kconfig b/arch/riscv/kvm/Kconfig
index dfc237d7875b..d490db943858 100644
--- a/arch/riscv/kvm/Kconfig
+++ b/arch/riscv/kvm/Kconfig
@@ -20,18 +20,17 @@ if VIRTUALIZATION
 config KVM
 	tristate "Kernel-based Virtual Machine (KVM) support (EXPERIMENTAL)"
 	depends on RISCV_SBI && MMU
-	select HAVE_KVM_EVENTFD
 	select HAVE_KVM_IRQCHIP
-	select HAVE_KVM_IRQFD
 	select HAVE_KVM_IRQ_ROUTING
 	select HAVE_KVM_MSI
 	select HAVE_KVM_VCPU_ASYNC_IOCTL
+	select KVM_COMMON
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
 	select KVM_GENERIC_HARDWARE_ENABLING
 	select KVM_MMIO
 	select KVM_XFER_TO_GUEST_WORK
-	select MMU_NOTIFIER
-	select PREEMPT_NOTIFIERS
+	select KVM_GENERIC_MMU_NOTIFIER
+	select SCHED_INFO
 	help
 	  Support hosting virtualized guest machines.
 
diff --git a/arch/riscv/kvm/Makefile b/arch/riscv/kvm/Makefile
index 4c2067fc59fc..c9646521f113 100644
--- a/arch/riscv/kvm/Makefile
+++ b/arch/riscv/kvm/Makefile
@@ -26,6 +26,7 @@ kvm-$(CONFIG_RISCV_SBI_V01) += vcpu_sbi_v01.o
 kvm-y += vcpu_sbi_base.o
 kvm-y += vcpu_sbi_replace.o
 kvm-y += vcpu_sbi_hsm.o
+kvm-y += vcpu_sbi_sta.o
 kvm-y += vcpu_timer.o
 kvm-$(CONFIG_RISCV_PMU_SBI) += vcpu_pmu.o vcpu_sbi_pmu.o
 kvm-y += aia.o
diff --git a/arch/riscv/kvm/mmu.c b/arch/riscv/kvm/mmu.c
index 068c74593871..a9e2fd7245e1 100644
--- a/arch/riscv/kvm/mmu.c
+++ b/arch/riscv/kvm/mmu.c
@@ -103,7 +103,7 @@ static bool gstage_get_leaf_entry(struct kvm *kvm, gpa_t addr,
 	*ptep_level = current_level;
 	ptep = (pte_t *)kvm->arch.pgd;
 	ptep = &ptep[gstage_pte_index(addr, current_level)];
-	while (ptep && pte_val(*ptep)) {
+	while (ptep && pte_val(ptep_get(ptep))) {
 		if (gstage_pte_leaf(ptep)) {
 			*ptep_level = current_level;
 			*ptepp = ptep;
@@ -113,7 +113,7 @@ static bool gstage_get_leaf_entry(struct kvm *kvm, gpa_t addr,
 		if (current_level) {
 			current_level--;
 			*ptep_level = current_level;
-			ptep = (pte_t *)gstage_pte_page_vaddr(*ptep);
+			ptep = (pte_t *)gstage_pte_page_vaddr(ptep_get(ptep));
 			ptep = &ptep[gstage_pte_index(addr, current_level)];
 		} else {
 			ptep = NULL;
@@ -149,25 +149,25 @@ static int gstage_set_pte(struct kvm *kvm, u32 level,
 		if (gstage_pte_leaf(ptep))
 			return -EEXIST;
 
-		if (!pte_val(*ptep)) {
+		if (!pte_val(ptep_get(ptep))) {
 			if (!pcache)
 				return -ENOMEM;
 			next_ptep = kvm_mmu_memory_cache_alloc(pcache);
 			if (!next_ptep)
 				return -ENOMEM;
-			*ptep = pfn_pte(PFN_DOWN(__pa(next_ptep)),
-					__pgprot(_PAGE_TABLE));
+			set_pte(ptep, pfn_pte(PFN_DOWN(__pa(next_ptep)),
+					      __pgprot(_PAGE_TABLE)));
 		} else {
 			if (gstage_pte_leaf(ptep))
 				return -EEXIST;
-			next_ptep = (pte_t *)gstage_pte_page_vaddr(*ptep);
+			next_ptep = (pte_t *)gstage_pte_page_vaddr(ptep_get(ptep));
 		}
 
 		current_level--;
 		ptep = &next_ptep[gstage_pte_index(addr, current_level)];
 	}
 
-	*ptep = *new_pte;
+	set_pte(ptep, *new_pte);
 	if (gstage_pte_leaf(ptep))
 		gstage_remote_tlb_flush(kvm, current_level, addr);
 
@@ -239,11 +239,11 @@ static void gstage_op_pte(struct kvm *kvm, gpa_t addr,
 
 	BUG_ON(addr & (page_size - 1));
 
-	if (!pte_val(*ptep))
+	if (!pte_val(ptep_get(ptep)))
 		return;
 
 	if (ptep_level && !gstage_pte_leaf(ptep)) {
-		next_ptep = (pte_t *)gstage_pte_page_vaddr(*ptep);
+		next_ptep = (pte_t *)gstage_pte_page_vaddr(ptep_get(ptep));
 		next_ptep_level = ptep_level - 1;
 		ret = gstage_level_to_page_size(next_ptep_level,
 						&next_page_size);
@@ -261,7 +261,7 @@ static void gstage_op_pte(struct kvm *kvm, gpa_t addr,
 		if (op == GSTAGE_OP_CLEAR)
 			set_pte(ptep, __pte(0));
 		else if (op == GSTAGE_OP_WP)
-			set_pte(ptep, __pte(pte_val(*ptep) & ~_PAGE_WRITE));
+			set_pte(ptep, __pte(pte_val(ptep_get(ptep)) & ~_PAGE_WRITE));
 		gstage_remote_tlb_flush(kvm, ptep_level, addr);
 	}
 }
@@ -603,7 +603,7 @@ bool kvm_test_age_gfn(struct kvm *kvm, struct kvm_gfn_range *range)
 				   &ptep, &ptep_level))
 		return false;
 
-	return pte_young(*ptep);
+	return pte_young(ptep_get(ptep));
 }
 
 int kvm_riscv_gstage_map(struct kvm_vcpu *vcpu,
diff --git a/arch/riscv/kvm/vcpu.c b/arch/riscv/kvm/vcpu.c
index e087c809073c..b5ca9f2e98ac 100644
--- a/arch/riscv/kvm/vcpu.c
+++ b/arch/riscv/kvm/vcpu.c
@@ -83,6 +83,8 @@ static void kvm_riscv_reset_vcpu(struct kvm_vcpu *vcpu)
 	vcpu->arch.hfence_tail = 0;
 	memset(vcpu->arch.hfence_queue, 0, sizeof(vcpu->arch.hfence_queue));
 
+	kvm_riscv_vcpu_sbi_sta_reset(vcpu);
+
 	/* Reset the guest CSRs for hotplug usecase */
 	if (loaded)
 		kvm_arch_vcpu_load(vcpu, smp_processor_id());
@@ -541,6 +543,8 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 
 	kvm_riscv_vcpu_aia_load(vcpu, cpu);
 
+	kvm_make_request(KVM_REQ_STEAL_UPDATE, vcpu);
+
 	vcpu->cpu = cpu;
 }
 
@@ -614,6 +618,9 @@ static void kvm_riscv_check_vcpu_requests(struct kvm_vcpu *vcpu)
 
 		if (kvm_check_request(KVM_REQ_HFENCE, vcpu))
 			kvm_riscv_hfence_process(vcpu);
+
+		if (kvm_check_request(KVM_REQ_STEAL_UPDATE, vcpu))
+			kvm_riscv_vcpu_record_steal_time(vcpu);
 	}
 }
 
@@ -757,8 +764,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		/* Update HVIP CSR for current CPU */
 		kvm_riscv_update_hvip(vcpu);
 
-		if (ret <= 0 ||
-		    kvm_riscv_gstage_vmid_ver_changed(&vcpu->kvm->arch.vmid) ||
+		if (kvm_riscv_gstage_vmid_ver_changed(&vcpu->kvm->arch.vmid) ||
 		    kvm_request_pending(vcpu) ||
 		    xfer_to_guest_mode_work_pending()) {
 			vcpu->mode = OUTSIDE_GUEST_MODE;
diff --git a/arch/riscv/kvm/vcpu_onereg.c b/arch/riscv/kvm/vcpu_onereg.c
index f8c9fa0c03c5..5f7355e96008 100644
--- a/arch/riscv/kvm/vcpu_onereg.c
+++ b/arch/riscv/kvm/vcpu_onereg.c
@@ -42,15 +42,42 @@ static const unsigned long kvm_isa_ext_arr[] = {
 	KVM_ISA_EXT_ARR(SVPBMT),
 	KVM_ISA_EXT_ARR(ZBA),
 	KVM_ISA_EXT_ARR(ZBB),
+	KVM_ISA_EXT_ARR(ZBC),
+	KVM_ISA_EXT_ARR(ZBKB),
+	KVM_ISA_EXT_ARR(ZBKC),
+	KVM_ISA_EXT_ARR(ZBKX),
 	KVM_ISA_EXT_ARR(ZBS),
+	KVM_ISA_EXT_ARR(ZFA),
+	KVM_ISA_EXT_ARR(ZFH),
+	KVM_ISA_EXT_ARR(ZFHMIN),
 	KVM_ISA_EXT_ARR(ZICBOM),
 	KVM_ISA_EXT_ARR(ZICBOZ),
 	KVM_ISA_EXT_ARR(ZICNTR),
 	KVM_ISA_EXT_ARR(ZICOND),
 	KVM_ISA_EXT_ARR(ZICSR),
 	KVM_ISA_EXT_ARR(ZIFENCEI),
+	KVM_ISA_EXT_ARR(ZIHINTNTL),
 	KVM_ISA_EXT_ARR(ZIHINTPAUSE),
 	KVM_ISA_EXT_ARR(ZIHPM),
+	KVM_ISA_EXT_ARR(ZKND),
+	KVM_ISA_EXT_ARR(ZKNE),
+	KVM_ISA_EXT_ARR(ZKNH),
+	KVM_ISA_EXT_ARR(ZKR),
+	KVM_ISA_EXT_ARR(ZKSED),
+	KVM_ISA_EXT_ARR(ZKSH),
+	KVM_ISA_EXT_ARR(ZKT),
+	KVM_ISA_EXT_ARR(ZVBB),
+	KVM_ISA_EXT_ARR(ZVBC),
+	KVM_ISA_EXT_ARR(ZVFH),
+	KVM_ISA_EXT_ARR(ZVFHMIN),
+	KVM_ISA_EXT_ARR(ZVKB),
+	KVM_ISA_EXT_ARR(ZVKG),
+	KVM_ISA_EXT_ARR(ZVKNED),
+	KVM_ISA_EXT_ARR(ZVKNHA),
+	KVM_ISA_EXT_ARR(ZVKNHB),
+	KVM_ISA_EXT_ARR(ZVKSED),
+	KVM_ISA_EXT_ARR(ZVKSH),
+	KVM_ISA_EXT_ARR(ZVKT),
 };
 
 static unsigned long kvm_riscv_vcpu_base2isa_ext(unsigned long base_ext)
@@ -92,13 +119,40 @@ static bool kvm_riscv_vcpu_isa_disable_allowed(unsigned long ext)
 	case KVM_RISCV_ISA_EXT_SVNAPOT:
 	case KVM_RISCV_ISA_EXT_ZBA:
 	case KVM_RISCV_ISA_EXT_ZBB:
+	case KVM_RISCV_ISA_EXT_ZBC:
+	case KVM_RISCV_ISA_EXT_ZBKB:
+	case KVM_RISCV_ISA_EXT_ZBKC:
+	case KVM_RISCV_ISA_EXT_ZBKX:
 	case KVM_RISCV_ISA_EXT_ZBS:
+	case KVM_RISCV_ISA_EXT_ZFA:
+	case KVM_RISCV_ISA_EXT_ZFH:
+	case KVM_RISCV_ISA_EXT_ZFHMIN:
 	case KVM_RISCV_ISA_EXT_ZICNTR:
 	case KVM_RISCV_ISA_EXT_ZICOND:
 	case KVM_RISCV_ISA_EXT_ZICSR:
 	case KVM_RISCV_ISA_EXT_ZIFENCEI:
+	case KVM_RISCV_ISA_EXT_ZIHINTNTL:
 	case KVM_RISCV_ISA_EXT_ZIHINTPAUSE:
 	case KVM_RISCV_ISA_EXT_ZIHPM:
+	case KVM_RISCV_ISA_EXT_ZKND:
+	case KVM_RISCV_ISA_EXT_ZKNE:
+	case KVM_RISCV_ISA_EXT_ZKNH:
+	case KVM_RISCV_ISA_EXT_ZKR:
+	case KVM_RISCV_ISA_EXT_ZKSED:
+	case KVM_RISCV_ISA_EXT_ZKSH:
+	case KVM_RISCV_ISA_EXT_ZKT:
+	case KVM_RISCV_ISA_EXT_ZVBB:
+	case KVM_RISCV_ISA_EXT_ZVBC:
+	case KVM_RISCV_ISA_EXT_ZVFH:
+	case KVM_RISCV_ISA_EXT_ZVFHMIN:
+	case KVM_RISCV_ISA_EXT_ZVKB:
+	case KVM_RISCV_ISA_EXT_ZVKG:
+	case KVM_RISCV_ISA_EXT_ZVKNED:
+	case KVM_RISCV_ISA_EXT_ZVKNHA:
+	case KVM_RISCV_ISA_EXT_ZVKNHB:
+	case KVM_RISCV_ISA_EXT_ZVKSED:
+	case KVM_RISCV_ISA_EXT_ZVKSH:
+	case KVM_RISCV_ISA_EXT_ZVKT:
 		return false;
 	/* Extensions which can be disabled using Smstateen */
 	case KVM_RISCV_ISA_EXT_SSAIA:
@@ -485,7 +539,7 @@ static int kvm_riscv_vcpu_set_reg_csr(struct kvm_vcpu *vcpu,
 		if (riscv_has_extension_unlikely(RISCV_ISA_EXT_SMSTATEEN))
 			rc = kvm_riscv_vcpu_smstateen_set_csr(vcpu, reg_num,
 							      reg_val);
-break;
+		break;
 	default:
 		rc = -ENOENT;
 		break;
@@ -931,50 +985,106 @@ static inline unsigned long num_isa_ext_regs(const struct kvm_vcpu *vcpu)
 	return copy_isa_ext_reg_indices(vcpu, NULL);;
 }
 
-static inline unsigned long num_sbi_ext_regs(void)
+static int copy_sbi_ext_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
 {
-	/*
-	 * number of KVM_REG_RISCV_SBI_SINGLE +
-	 * 2 x (number of KVM_REG_RISCV_SBI_MULTI)
-	 */
-	return KVM_RISCV_SBI_EXT_MAX + 2*(KVM_REG_RISCV_SBI_MULTI_REG_LAST+1);
-}
-
-static int copy_sbi_ext_reg_indices(u64 __user *uindices)
-{
-	int n;
+	unsigned int n = 0;
 
-	/* copy KVM_REG_RISCV_SBI_SINGLE */
-	n = KVM_RISCV_SBI_EXT_MAX;
-	for (int i = 0; i < n; i++) {
+	for (int i = 0; i < KVM_RISCV_SBI_EXT_MAX; i++) {
 		u64 size = IS_ENABLED(CONFIG_32BIT) ?
 			   KVM_REG_SIZE_U32 : KVM_REG_SIZE_U64;
 		u64 reg = KVM_REG_RISCV | size | KVM_REG_RISCV_SBI_EXT |
 			  KVM_REG_RISCV_SBI_SINGLE | i;
 
+		if (!riscv_vcpu_supports_sbi_ext(vcpu, i))
+			continue;
+
 		if (uindices) {
 			if (put_user(reg, uindices))
 				return -EFAULT;
 			uindices++;
 		}
+
+		n++;
 	}
 
-	/* copy KVM_REG_RISCV_SBI_MULTI */
-	n = KVM_REG_RISCV_SBI_MULTI_REG_LAST + 1;
-	for (int i = 0; i < n; i++) {
-		u64 size = IS_ENABLED(CONFIG_32BIT) ?
-			   KVM_REG_SIZE_U32 : KVM_REG_SIZE_U64;
-		u64 reg = KVM_REG_RISCV | size | KVM_REG_RISCV_SBI_EXT |
-			  KVM_REG_RISCV_SBI_MULTI_EN | i;
+	return n;
+}
+
+static unsigned long num_sbi_ext_regs(struct kvm_vcpu *vcpu)
+{
+	return copy_sbi_ext_reg_indices(vcpu, NULL);
+}
+
+static int copy_sbi_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
+{
+	struct kvm_vcpu_sbi_context *scontext = &vcpu->arch.sbi_context;
+	int total = 0;
+
+	if (scontext->ext_status[KVM_RISCV_SBI_EXT_STA] == KVM_RISCV_SBI_EXT_STATUS_ENABLED) {
+		u64 size = IS_ENABLED(CONFIG_32BIT) ? KVM_REG_SIZE_U32 : KVM_REG_SIZE_U64;
+		int n = sizeof(struct kvm_riscv_sbi_sta) / sizeof(unsigned long);
+
+		for (int i = 0; i < n; i++) {
+			u64 reg = KVM_REG_RISCV | size |
+				  KVM_REG_RISCV_SBI_STATE |
+				  KVM_REG_RISCV_SBI_STA | i;
+
+			if (uindices) {
+				if (put_user(reg, uindices))
+					return -EFAULT;
+				uindices++;
+			}
+		}
+
+		total += n;
+	}
+
+	return total;
+}
+
+static inline unsigned long num_sbi_regs(struct kvm_vcpu *vcpu)
+{
+	return copy_sbi_reg_indices(vcpu, NULL);
+}
+
+static inline unsigned long num_vector_regs(const struct kvm_vcpu *vcpu)
+{
+	if (!riscv_isa_extension_available(vcpu->arch.isa, v))
+		return 0;
+
+	/* vstart, vl, vtype, vcsr, vlenb and 32 vector regs */
+	return 37;
+}
+
+static int copy_vector_reg_indices(const struct kvm_vcpu *vcpu,
+				u64 __user *uindices)
+{
+	const struct kvm_cpu_context *cntx = &vcpu->arch.guest_context;
+	int n = num_vector_regs(vcpu);
+	u64 reg, size;
+	int i;
+
+	if (n == 0)
+		return 0;
+
+	/* copy vstart, vl, vtype, vcsr and vlenb */
+	size = IS_ENABLED(CONFIG_32BIT) ? KVM_REG_SIZE_U32 : KVM_REG_SIZE_U64;
+	for (i = 0; i < 5; i++) {
+		reg = KVM_REG_RISCV | size | KVM_REG_RISCV_VECTOR | i;
 
 		if (uindices) {
 			if (put_user(reg, uindices))
 				return -EFAULT;
 			uindices++;
 		}
+	}
 
-		reg = KVM_REG_RISCV | size | KVM_REG_RISCV_SBI_EXT |
-			  KVM_REG_RISCV_SBI_MULTI_DIS | i;
+	/* vector_regs have a variable 'vlenb' size */
+	size = __builtin_ctzl(cntx->vector.vlenb);
+	size <<= KVM_REG_SIZE_SHIFT;
+	for (i = 0; i < 32; i++) {
+		reg = KVM_REG_RISCV | KVM_REG_RISCV_VECTOR | size |
+			KVM_REG_RISCV_VECTOR_REG(i);
 
 		if (uindices) {
 			if (put_user(reg, uindices))
@@ -983,7 +1093,7 @@ static int copy_sbi_ext_reg_indices(u64 __user *uindices)
 		}
 	}
 
-	return num_sbi_ext_regs();
+	return n;
 }
 
 /*
@@ -1001,8 +1111,10 @@ unsigned long kvm_riscv_vcpu_num_regs(struct kvm_vcpu *vcpu)
 	res += num_timer_regs();
 	res += num_fp_f_regs(vcpu);
 	res += num_fp_d_regs(vcpu);
+	res += num_vector_regs(vcpu);
 	res += num_isa_ext_regs(vcpu);
-	res += num_sbi_ext_regs();
+	res += num_sbi_ext_regs(vcpu);
+	res += num_sbi_regs(vcpu);
 
 	return res;
 }
@@ -1045,14 +1157,25 @@ int kvm_riscv_vcpu_copy_reg_indices(struct kvm_vcpu *vcpu,
 		return ret;
 	uindices += ret;
 
+	ret = copy_vector_reg_indices(vcpu, uindices);
+	if (ret < 0)
+		return ret;
+	uindices += ret;
+
 	ret = copy_isa_ext_reg_indices(vcpu, uindices);
 	if (ret < 0)
 		return ret;
 	uindices += ret;
 
-	ret = copy_sbi_ext_reg_indices(uindices);
+	ret = copy_sbi_ext_reg_indices(vcpu, uindices);
 	if (ret < 0)
 		return ret;
+	uindices += ret;
+
+	ret = copy_sbi_reg_indices(vcpu, uindices);
+	if (ret < 0)
+		return ret;
+	uindices += ret;
 
 	return 0;
 }
@@ -1075,12 +1198,14 @@ int kvm_riscv_vcpu_set_reg(struct kvm_vcpu *vcpu,
 	case KVM_REG_RISCV_FP_D:
 		return kvm_riscv_vcpu_set_reg_fp(vcpu, reg,
 						 KVM_REG_RISCV_FP_D);
+	case KVM_REG_RISCV_VECTOR:
+		return kvm_riscv_vcpu_set_reg_vector(vcpu, reg);
 	case KVM_REG_RISCV_ISA_EXT:
 		return kvm_riscv_vcpu_set_reg_isa_ext(vcpu, reg);
 	case KVM_REG_RISCV_SBI_EXT:
 		return kvm_riscv_vcpu_set_reg_sbi_ext(vcpu, reg);
-	case KVM_REG_RISCV_VECTOR:
-		return kvm_riscv_vcpu_set_reg_vector(vcpu, reg);
+	case KVM_REG_RISCV_SBI_STATE:
+		return kvm_riscv_vcpu_set_reg_sbi(vcpu, reg);
 	default:
 		break;
 	}
@@ -1106,12 +1231,14 @@ int kvm_riscv_vcpu_get_reg(struct kvm_vcpu *vcpu,
 	case KVM_REG_RISCV_FP_D:
 		return kvm_riscv_vcpu_get_reg_fp(vcpu, reg,
 						 KVM_REG_RISCV_FP_D);
+	case KVM_REG_RISCV_VECTOR:
+		return kvm_riscv_vcpu_get_reg_vector(vcpu, reg);
 	case KVM_REG_RISCV_ISA_EXT:
 		return kvm_riscv_vcpu_get_reg_isa_ext(vcpu, reg);
 	case KVM_REG_RISCV_SBI_EXT:
 		return kvm_riscv_vcpu_get_reg_sbi_ext(vcpu, reg);
-	case KVM_REG_RISCV_VECTOR:
-		return kvm_riscv_vcpu_get_reg_vector(vcpu, reg);
+	case KVM_REG_RISCV_SBI_STATE:
+		return kvm_riscv_vcpu_get_reg_sbi(vcpu, reg);
 	default:
 		break;
 	}
diff --git a/arch/riscv/kvm/vcpu_sbi.c b/arch/riscv/kvm/vcpu_sbi.c
index a04ff98085d9..72a2ffb8dcd1 100644
--- a/arch/riscv/kvm/vcpu_sbi.c
+++ b/arch/riscv/kvm/vcpu_sbi.c
@@ -71,6 +71,10 @@ static const struct kvm_riscv_sbi_extension_entry sbi_ext[] = {
 		.ext_ptr = &vcpu_sbi_ext_dbcn,
 	},
 	{
+		.ext_idx = KVM_RISCV_SBI_EXT_STA,
+		.ext_ptr = &vcpu_sbi_ext_sta,
+	},
+	{
 		.ext_idx = KVM_RISCV_SBI_EXT_EXPERIMENTAL,
 		.ext_ptr = &vcpu_sbi_ext_experimental,
 	},
@@ -80,6 +84,34 @@ static const struct kvm_riscv_sbi_extension_entry sbi_ext[] = {
 	},
 };
 
+static const struct kvm_riscv_sbi_extension_entry *
+riscv_vcpu_get_sbi_ext(struct kvm_vcpu *vcpu, unsigned long idx)
+{
+	const struct kvm_riscv_sbi_extension_entry *sext = NULL;
+
+	if (idx >= KVM_RISCV_SBI_EXT_MAX)
+		return NULL;
+
+	for (int i = 0; i < ARRAY_SIZE(sbi_ext); i++) {
+		if (sbi_ext[i].ext_idx == idx) {
+			sext = &sbi_ext[i];
+			break;
+		}
+	}
+
+	return sext;
+}
+
+bool riscv_vcpu_supports_sbi_ext(struct kvm_vcpu *vcpu, int idx)
+{
+	struct kvm_vcpu_sbi_context *scontext = &vcpu->arch.sbi_context;
+	const struct kvm_riscv_sbi_extension_entry *sext;
+
+	sext = riscv_vcpu_get_sbi_ext(vcpu, idx);
+
+	return sext && scontext->ext_status[sext->ext_idx] != KVM_RISCV_SBI_EXT_STATUS_UNAVAILABLE;
+}
+
 void kvm_riscv_vcpu_sbi_forward(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	struct kvm_cpu_context *cp = &vcpu->arch.guest_context;
@@ -140,28 +172,19 @@ static int riscv_vcpu_set_sbi_ext_single(struct kvm_vcpu *vcpu,
 					 unsigned long reg_num,
 					 unsigned long reg_val)
 {
-	unsigned long i;
-	const struct kvm_riscv_sbi_extension_entry *sext = NULL;
 	struct kvm_vcpu_sbi_context *scontext = &vcpu->arch.sbi_context;
-
-	if (reg_num >= KVM_RISCV_SBI_EXT_MAX)
-		return -ENOENT;
+	const struct kvm_riscv_sbi_extension_entry *sext;
 
 	if (reg_val != 1 && reg_val != 0)
 		return -EINVAL;
 
-	for (i = 0; i < ARRAY_SIZE(sbi_ext); i++) {
-		if (sbi_ext[i].ext_idx == reg_num) {
-			sext = &sbi_ext[i];
-			break;
-		}
-	}
-	if (!sext)
+	sext = riscv_vcpu_get_sbi_ext(vcpu, reg_num);
+	if (!sext || scontext->ext_status[sext->ext_idx] == KVM_RISCV_SBI_EXT_STATUS_UNAVAILABLE)
 		return -ENOENT;
 
 	scontext->ext_status[sext->ext_idx] = (reg_val) ?
-			KVM_RISCV_SBI_EXT_AVAILABLE :
-			KVM_RISCV_SBI_EXT_UNAVAILABLE;
+			KVM_RISCV_SBI_EXT_STATUS_ENABLED :
+			KVM_RISCV_SBI_EXT_STATUS_DISABLED;
 
 	return 0;
 }
@@ -170,24 +193,16 @@ static int riscv_vcpu_get_sbi_ext_single(struct kvm_vcpu *vcpu,
 					 unsigned long reg_num,
 					 unsigned long *reg_val)
 {
-	unsigned long i;
-	const struct kvm_riscv_sbi_extension_entry *sext = NULL;
 	struct kvm_vcpu_sbi_context *scontext = &vcpu->arch.sbi_context;
+	const struct kvm_riscv_sbi_extension_entry *sext;
 
-	if (reg_num >= KVM_RISCV_SBI_EXT_MAX)
-		return -ENOENT;
-
-	for (i = 0; i < ARRAY_SIZE(sbi_ext); i++) {
-		if (sbi_ext[i].ext_idx == reg_num) {
-			sext = &sbi_ext[i];
-			break;
-		}
-	}
-	if (!sext)
+	sext = riscv_vcpu_get_sbi_ext(vcpu, reg_num);
+	if (!sext || scontext->ext_status[sext->ext_idx] == KVM_RISCV_SBI_EXT_STATUS_UNAVAILABLE)
 		return -ENOENT;
 
 	*reg_val = scontext->ext_status[sext->ext_idx] ==
-				KVM_RISCV_SBI_EXT_AVAILABLE;
+				KVM_RISCV_SBI_EXT_STATUS_ENABLED;
+
 	return 0;
 }
 
@@ -310,6 +325,69 @@ int kvm_riscv_vcpu_get_reg_sbi_ext(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
+int kvm_riscv_vcpu_set_reg_sbi(struct kvm_vcpu *vcpu,
+			       const struct kvm_one_reg *reg)
+{
+	unsigned long __user *uaddr =
+			(unsigned long __user *)(unsigned long)reg->addr;
+	unsigned long reg_num = reg->id & ~(KVM_REG_ARCH_MASK |
+					    KVM_REG_SIZE_MASK |
+					    KVM_REG_RISCV_SBI_STATE);
+	unsigned long reg_subtype, reg_val;
+
+	if (KVM_REG_SIZE(reg->id) != sizeof(unsigned long))
+		return -EINVAL;
+
+	if (copy_from_user(&reg_val, uaddr, KVM_REG_SIZE(reg->id)))
+		return -EFAULT;
+
+	reg_subtype = reg_num & KVM_REG_RISCV_SUBTYPE_MASK;
+	reg_num &= ~KVM_REG_RISCV_SUBTYPE_MASK;
+
+	switch (reg_subtype) {
+	case KVM_REG_RISCV_SBI_STA:
+		return kvm_riscv_vcpu_set_reg_sbi_sta(vcpu, reg_num, reg_val);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int kvm_riscv_vcpu_get_reg_sbi(struct kvm_vcpu *vcpu,
+			       const struct kvm_one_reg *reg)
+{
+	unsigned long __user *uaddr =
+			(unsigned long __user *)(unsigned long)reg->addr;
+	unsigned long reg_num = reg->id & ~(KVM_REG_ARCH_MASK |
+					    KVM_REG_SIZE_MASK |
+					    KVM_REG_RISCV_SBI_STATE);
+	unsigned long reg_subtype, reg_val;
+	int ret;
+
+	if (KVM_REG_SIZE(reg->id) != sizeof(unsigned long))
+		return -EINVAL;
+
+	reg_subtype = reg_num & KVM_REG_RISCV_SUBTYPE_MASK;
+	reg_num &= ~KVM_REG_RISCV_SUBTYPE_MASK;
+
+	switch (reg_subtype) {
+	case KVM_REG_RISCV_SBI_STA:
+		ret = kvm_riscv_vcpu_get_reg_sbi_sta(vcpu, reg_num, &reg_val);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (ret)
+		return ret;
+
+	if (copy_to_user(uaddr, &reg_val, KVM_REG_SIZE(reg->id)))
+		return -EFAULT;
+
+	return 0;
+}
+
 const struct kvm_vcpu_sbi_extension *kvm_vcpu_sbi_find_ext(
 				struct kvm_vcpu *vcpu, unsigned long extid)
 {
@@ -325,7 +403,7 @@ const struct kvm_vcpu_sbi_extension *kvm_vcpu_sbi_find_ext(
 		if (ext->extid_start <= extid && ext->extid_end >= extid) {
 			if (entry->ext_idx >= KVM_RISCV_SBI_EXT_MAX ||
 			    scontext->ext_status[entry->ext_idx] ==
-						KVM_RISCV_SBI_EXT_AVAILABLE)
+						KVM_RISCV_SBI_EXT_STATUS_ENABLED)
 				return ext;
 
 			return NULL;
@@ -413,12 +491,12 @@ void kvm_riscv_vcpu_sbi_init(struct kvm_vcpu *vcpu)
 
 		if (ext->probe && !ext->probe(vcpu)) {
 			scontext->ext_status[entry->ext_idx] =
-				KVM_RISCV_SBI_EXT_UNAVAILABLE;
+				KVM_RISCV_SBI_EXT_STATUS_UNAVAILABLE;
 			continue;
 		}
 
-		scontext->ext_status[entry->ext_idx] = ext->default_unavail ?
-					KVM_RISCV_SBI_EXT_UNAVAILABLE :
-					KVM_RISCV_SBI_EXT_AVAILABLE;
+		scontext->ext_status[entry->ext_idx] = ext->default_disabled ?
+					KVM_RISCV_SBI_EXT_STATUS_DISABLED :
+					KVM_RISCV_SBI_EXT_STATUS_ENABLED;
 	}
 }
diff --git a/arch/riscv/kvm/vcpu_sbi_replace.c b/arch/riscv/kvm/vcpu_sbi_replace.c
index 23b57c931b15..9c2ab3dfa93a 100644
--- a/arch/riscv/kvm/vcpu_sbi_replace.c
+++ b/arch/riscv/kvm/vcpu_sbi_replace.c
@@ -204,6 +204,6 @@ static int kvm_sbi_ext_dbcn_handler(struct kvm_vcpu *vcpu,
 const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_dbcn = {
 	.extid_start = SBI_EXT_DBCN,
 	.extid_end = SBI_EXT_DBCN,
-	.default_unavail = true,
+	.default_disabled = true,
 	.handler = kvm_sbi_ext_dbcn_handler,
 };
diff --git a/arch/riscv/kvm/vcpu_sbi_sta.c b/arch/riscv/kvm/vcpu_sbi_sta.c
new file mode 100644
index 000000000000..d8cf9ca28c61
--- /dev/null
+++ b/arch/riscv/kvm/vcpu_sbi_sta.c
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023 Ventana Micro Systems Inc.
+ */
+
+#include <linux/kconfig.h>
+#include <linux/kernel.h>
+#include <linux/kvm_host.h>
+#include <linux/mm.h>
+#include <linux/sizes.h>
+
+#include <asm/bug.h>
+#include <asm/current.h>
+#include <asm/kvm_vcpu_sbi.h>
+#include <asm/page.h>
+#include <asm/sbi.h>
+#include <asm/uaccess.h>
+
+void kvm_riscv_vcpu_sbi_sta_reset(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.sta.shmem = INVALID_GPA;
+	vcpu->arch.sta.last_steal = 0;
+}
+
+void kvm_riscv_vcpu_record_steal_time(struct kvm_vcpu *vcpu)
+{
+	gpa_t shmem = vcpu->arch.sta.shmem;
+	u64 last_steal = vcpu->arch.sta.last_steal;
+	__le32 __user *sequence_ptr;
+	__le64 __user *steal_ptr;
+	__le32 sequence_le;
+	__le64 steal_le;
+	u32 sequence;
+	u64 steal;
+	unsigned long hva;
+	gfn_t gfn;
+
+	if (shmem == INVALID_GPA)
+		return;
+
+	/*
+	 * shmem is 64-byte aligned (see the enforcement in
+	 * kvm_sbi_sta_steal_time_set_shmem()) and the size of sbi_sta_struct
+	 * is 64 bytes, so we know all its offsets are in the same page.
+	 */
+	gfn = shmem >> PAGE_SHIFT;
+	hva = kvm_vcpu_gfn_to_hva(vcpu, gfn);
+
+	if (WARN_ON(kvm_is_error_hva(hva))) {
+		vcpu->arch.sta.shmem = INVALID_GPA;
+		return;
+	}
+
+	sequence_ptr = (__le32 __user *)(hva + offset_in_page(shmem) +
+			       offsetof(struct sbi_sta_struct, sequence));
+	steal_ptr = (__le64 __user *)(hva + offset_in_page(shmem) +
+			    offsetof(struct sbi_sta_struct, steal));
+
+	if (WARN_ON(get_user(sequence_le, sequence_ptr)))
+		return;
+
+	sequence = le32_to_cpu(sequence_le);
+	sequence += 1;
+
+	if (WARN_ON(put_user(cpu_to_le32(sequence), sequence_ptr)))
+		return;
+
+	if (!WARN_ON(get_user(steal_le, steal_ptr))) {
+		steal = le64_to_cpu(steal_le);
+		vcpu->arch.sta.last_steal = READ_ONCE(current->sched_info.run_delay);
+		steal += vcpu->arch.sta.last_steal - last_steal;
+		WARN_ON(put_user(cpu_to_le64(steal), steal_ptr));
+	}
+
+	sequence += 1;
+	WARN_ON(put_user(cpu_to_le32(sequence), sequence_ptr));
+
+	kvm_vcpu_mark_page_dirty(vcpu, gfn);
+}
+
+static int kvm_sbi_sta_steal_time_set_shmem(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpu_context *cp = &vcpu->arch.guest_context;
+	unsigned long shmem_phys_lo = cp->a0;
+	unsigned long shmem_phys_hi = cp->a1;
+	u32 flags = cp->a2;
+	struct sbi_sta_struct zero_sta = {0};
+	unsigned long hva;
+	bool writable;
+	gpa_t shmem;
+	int ret;
+
+	if (flags != 0)
+		return SBI_ERR_INVALID_PARAM;
+
+	if (shmem_phys_lo == SBI_STA_SHMEM_DISABLE &&
+	    shmem_phys_hi == SBI_STA_SHMEM_DISABLE) {
+		vcpu->arch.sta.shmem = INVALID_GPA;
+		return 0;
+	}
+
+	if (shmem_phys_lo & (SZ_64 - 1))
+		return SBI_ERR_INVALID_PARAM;
+
+	shmem = shmem_phys_lo;
+
+	if (shmem_phys_hi != 0) {
+		if (IS_ENABLED(CONFIG_32BIT))
+			shmem |= ((gpa_t)shmem_phys_hi << 32);
+		else
+			return SBI_ERR_INVALID_ADDRESS;
+	}
+
+	hva = kvm_vcpu_gfn_to_hva_prot(vcpu, shmem >> PAGE_SHIFT, &writable);
+	if (kvm_is_error_hva(hva) || !writable)
+		return SBI_ERR_INVALID_ADDRESS;
+
+	ret = kvm_vcpu_write_guest(vcpu, shmem, &zero_sta, sizeof(zero_sta));
+	if (ret)
+		return SBI_ERR_FAILURE;
+
+	vcpu->arch.sta.shmem = shmem;
+	vcpu->arch.sta.last_steal = current->sched_info.run_delay;
+
+	return 0;
+}
+
+static int kvm_sbi_ext_sta_handler(struct kvm_vcpu *vcpu, struct kvm_run *run,
+				   struct kvm_vcpu_sbi_return *retdata)
+{
+	struct kvm_cpu_context *cp = &vcpu->arch.guest_context;
+	unsigned long funcid = cp->a6;
+	int ret;
+
+	switch (funcid) {
+	case SBI_EXT_STA_STEAL_TIME_SET_SHMEM:
+		ret = kvm_sbi_sta_steal_time_set_shmem(vcpu);
+		break;
+	default:
+		ret = SBI_ERR_NOT_SUPPORTED;
+		break;
+	}
+
+	retdata->err_val = ret;
+
+	return 0;
+}
+
+static unsigned long kvm_sbi_ext_sta_probe(struct kvm_vcpu *vcpu)
+{
+	return !!sched_info_on();
+}
+
+const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_sta = {
+	.extid_start = SBI_EXT_STA,
+	.extid_end = SBI_EXT_STA,
+	.handler = kvm_sbi_ext_sta_handler,
+	.probe = kvm_sbi_ext_sta_probe,
+};
+
+int kvm_riscv_vcpu_get_reg_sbi_sta(struct kvm_vcpu *vcpu,
+				   unsigned long reg_num,
+				   unsigned long *reg_val)
+{
+	switch (reg_num) {
+	case KVM_REG_RISCV_SBI_STA_REG(shmem_lo):
+		*reg_val = (unsigned long)vcpu->arch.sta.shmem;
+		break;
+	case KVM_REG_RISCV_SBI_STA_REG(shmem_hi):
+		if (IS_ENABLED(CONFIG_32BIT))
+			*reg_val = upper_32_bits(vcpu->arch.sta.shmem);
+		else
+			*reg_val = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int kvm_riscv_vcpu_set_reg_sbi_sta(struct kvm_vcpu *vcpu,
+				   unsigned long reg_num,
+				   unsigned long reg_val)
+{
+	switch (reg_num) {
+	case KVM_REG_RISCV_SBI_STA_REG(shmem_lo):
+		if (IS_ENABLED(CONFIG_32BIT)) {
+			gpa_t hi = upper_32_bits(vcpu->arch.sta.shmem);
+
+			vcpu->arch.sta.shmem = reg_val;
+			vcpu->arch.sta.shmem |= hi << 32;
+		} else {
+			vcpu->arch.sta.shmem = reg_val;
+		}
+		break;
+	case KVM_REG_RISCV_SBI_STA_REG(shmem_hi):
+		if (IS_ENABLED(CONFIG_32BIT)) {
+			gpa_t lo = lower_32_bits(vcpu->arch.sta.shmem);
+
+			vcpu->arch.sta.shmem = ((gpa_t)reg_val << 32);
+			vcpu->arch.sta.shmem |= lo;
+		} else if (reg_val != 0) {
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
diff --git a/arch/riscv/kvm/vcpu_switch.S b/arch/riscv/kvm/vcpu_switch.S
index d74df8eb4d71..0c26189aa01c 100644
--- a/arch/riscv/kvm/vcpu_switch.S
+++ b/arch/riscv/kvm/vcpu_switch.S
@@ -15,7 +15,7 @@
 	.altmacro
 	.option norelax
 
-ENTRY(__kvm_riscv_switch_to)
+SYM_FUNC_START(__kvm_riscv_switch_to)
 	/* Save Host GPRs (except A0 and T0-T6) */
 	REG_S	ra, (KVM_ARCH_HOST_RA)(a0)
 	REG_S	sp, (KVM_ARCH_HOST_SP)(a0)
@@ -45,7 +45,7 @@ ENTRY(__kvm_riscv_switch_to)
 	REG_L	t0, (KVM_ARCH_GUEST_SSTATUS)(a0)
 	REG_L	t1, (KVM_ARCH_GUEST_HSTATUS)(a0)
 	REG_L	t2, (KVM_ARCH_GUEST_SCOUNTEREN)(a0)
-	la	t4, __kvm_switch_return
+	la	t4, .Lkvm_switch_return
 	REG_L	t5, (KVM_ARCH_GUEST_SEPC)(a0)
 
 	/* Save Host and Restore Guest SSTATUS */
@@ -113,7 +113,7 @@ ENTRY(__kvm_riscv_switch_to)
 
 	/* Back to Host */
 	.align 2
-__kvm_switch_return:
+.Lkvm_switch_return:
 	/* Swap Guest A0 with SSCRATCH */
 	csrrw	a0, CSR_SSCRATCH, a0
 
@@ -208,9 +208,9 @@ __kvm_switch_return:
 
 	/* Return to C code */
 	ret
-ENDPROC(__kvm_riscv_switch_to)
+SYM_FUNC_END(__kvm_riscv_switch_to)
 
-ENTRY(__kvm_riscv_unpriv_trap)
+SYM_CODE_START(__kvm_riscv_unpriv_trap)
 	/*
 	 * We assume that faulting unpriv load/store instruction is
 	 * 4-byte long and blindly increment SEPC by 4.
@@ -231,12 +231,10 @@ ENTRY(__kvm_riscv_unpriv_trap)
 	csrr	a1, CSR_HTINST
 	REG_S	a1, (KVM_ARCH_TRAP_HTINST)(a0)
 	sret
-ENDPROC(__kvm_riscv_unpriv_trap)
+SYM_CODE_END(__kvm_riscv_unpriv_trap)
 
 #ifdef	CONFIG_FPU
-	.align 3
-	.global __kvm_riscv_fp_f_save
-__kvm_riscv_fp_f_save:
+SYM_FUNC_START(__kvm_riscv_fp_f_save)
 	csrr t2, CSR_SSTATUS
 	li t1, SR_FS
 	csrs CSR_SSTATUS, t1
@@ -276,10 +274,9 @@ __kvm_riscv_fp_f_save:
 	sw t0, KVM_ARCH_FP_F_FCSR(a0)
 	csrw CSR_SSTATUS, t2
 	ret
+SYM_FUNC_END(__kvm_riscv_fp_f_save)
 
-	.align 3
-	.global __kvm_riscv_fp_d_save
-__kvm_riscv_fp_d_save:
+SYM_FUNC_START(__kvm_riscv_fp_d_save)
 	csrr t2, CSR_SSTATUS
 	li t1, SR_FS
 	csrs CSR_SSTATUS, t1
@@ -319,10 +316,9 @@ __kvm_riscv_fp_d_save:
 	sw t0, KVM_ARCH_FP_D_FCSR(a0)
 	csrw CSR_SSTATUS, t2
 	ret
+SYM_FUNC_END(__kvm_riscv_fp_d_save)
 
-	.align 3
-	.global __kvm_riscv_fp_f_restore
-__kvm_riscv_fp_f_restore:
+SYM_FUNC_START(__kvm_riscv_fp_f_restore)
 	csrr t2, CSR_SSTATUS
 	li t1, SR_FS
 	lw t0, KVM_ARCH_FP_F_FCSR(a0)
@@ -362,10 +358,9 @@ __kvm_riscv_fp_f_restore:
 	fscsr t0
 	csrw CSR_SSTATUS, t2
 	ret
+SYM_FUNC_END(__kvm_riscv_fp_f_restore)
 
-	.align 3
-	.global __kvm_riscv_fp_d_restore
-__kvm_riscv_fp_d_restore:
+SYM_FUNC_START(__kvm_riscv_fp_d_restore)
 	csrr t2, CSR_SSTATUS
 	li t1, SR_FS
 	lw t0, KVM_ARCH_FP_D_FCSR(a0)
@@ -405,4 +400,5 @@ __kvm_riscv_fp_d_restore:
 	fscsr t0
 	csrw CSR_SSTATUS, t2
 	ret
+SYM_FUNC_END(__kvm_riscv_fp_d_restore)
 #endif
diff --git a/arch/riscv/kvm/vcpu_vector.c b/arch/riscv/kvm/vcpu_vector.c
index b339a2682f25..d92d1348045c 100644
--- a/arch/riscv/kvm/vcpu_vector.c
+++ b/arch/riscv/kvm/vcpu_vector.c
@@ -76,6 +76,7 @@ int kvm_riscv_vcpu_alloc_vector_context(struct kvm_vcpu *vcpu,
 	cntx->vector.datap = kmalloc(riscv_v_vsize, GFP_KERNEL);
 	if (!cntx->vector.datap)
 		return -ENOMEM;
+	cntx->vector.vlenb = riscv_v_vsize / 32;
 
 	vcpu->arch.host_context.vector.datap = kzalloc(riscv_v_vsize, GFP_KERNEL);
 	if (!vcpu->arch.host_context.vector.datap)
@@ -115,6 +116,9 @@ static int kvm_riscv_vcpu_vreg_addr(struct kvm_vcpu *vcpu,
 		case KVM_REG_RISCV_VECTOR_CSR_REG(vcsr):
 			*reg_addr = &cntx->vector.vcsr;
 			break;
+		case KVM_REG_RISCV_VECTOR_CSR_REG(vlenb):
+			*reg_addr = &cntx->vector.vlenb;
+			break;
 		case KVM_REG_RISCV_VECTOR_CSR_REG(datap):
 		default:
 			return -ENOENT;
@@ -173,6 +177,18 @@ int kvm_riscv_vcpu_set_reg_vector(struct kvm_vcpu *vcpu,
 	if (!riscv_isa_extension_available(isa, v))
 		return -ENOENT;
 
+	if (reg_num == KVM_REG_RISCV_VECTOR_CSR_REG(vlenb)) {
+		struct kvm_cpu_context *cntx = &vcpu->arch.guest_context;
+		unsigned long reg_val;
+
+		if (copy_from_user(&reg_val, uaddr, reg_size))
+			return -EFAULT;
+		if (reg_val != cntx->vector.vlenb)
+			return -EINVAL;
+
+		return 0;
+	}
+
 	rc = kvm_riscv_vcpu_vreg_addr(vcpu, reg_num, reg_size, &reg_addr);
 	if (rc)
 		return rc;
diff --git a/arch/riscv/kvm/vm.c b/arch/riscv/kvm/vm.c
index 7e2b50c692c1..ce58bc48e5b8 100644
--- a/arch/riscv/kvm/vm.c
+++ b/arch/riscv/kvm/vm.c
@@ -179,7 +179,6 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = kvm_riscv_aia_available();
 		break;
 	case KVM_CAP_IOEVENTFD:
-	case KVM_CAP_DEVICE_CTRL:
 	case KVM_CAP_USER_MEMORY:
 	case KVM_CAP_SYNC_MMU:
 	case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
index 26cb2502ecf8..bd6e6c1b0497 100644
--- a/arch/riscv/lib/Makefile
+++ b/arch/riscv/lib/Makefile
@@ -6,8 +6,14 @@ lib-y			+= memmove.o
 lib-y			+= strcmp.o
 lib-y			+= strlen.o
 lib-y			+= strncmp.o
+lib-y			+= csum.o
+ifeq ($(CONFIG_MMU), y)
+lib-$(CONFIG_RISCV_ISA_V)	+= uaccess_vector.o
+endif
 lib-$(CONFIG_MMU)	+= uaccess.o
 lib-$(CONFIG_64BIT)	+= tishift.o
 lib-$(CONFIG_RISCV_ISA_ZICBOZ)	+= clear_page.o
 
 obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
+lib-$(CONFIG_RISCV_ISA_V)	+= xor.o
+lib-$(CONFIG_RISCV_ISA_V)	+= riscv_v_helpers.o
diff --git a/arch/riscv/lib/clear_page.S b/arch/riscv/lib/clear_page.S
index b22de1231144..20ff03f5b0f2 100644
--- a/arch/riscv/lib/clear_page.S
+++ b/arch/riscv/lib/clear_page.S
@@ -4,9 +4,9 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/export.h>
 #include <asm/asm.h>
 #include <asm/alternative-macros.h>
-#include <asm-generic/export.h>
 #include <asm/hwcap.h>
 #include <asm/insn-def.h>
 #include <asm/page.h>
diff --git a/arch/riscv/lib/csum.c b/arch/riscv/lib/csum.c
new file mode 100644
index 000000000000..74af3ab520b6
--- /dev/null
+++ b/arch/riscv/lib/csum.c
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Checksum library
+ *
+ * Influenced by arch/arm64/lib/csum.c
+ * Copyright (C) 2023 Rivos Inc.
+ */
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/jump_label.h>
+#include <linux/kasan-checks.h>
+#include <linux/kernel.h>
+
+#include <asm/cpufeature.h>
+
+#include <net/checksum.h>
+
+/* Default version is sufficient for 32 bit */
+#ifndef CONFIG_32BIT
+__sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+			const struct in6_addr *daddr,
+			__u32 len, __u8 proto, __wsum csum)
+{
+	unsigned int ulen, uproto;
+	unsigned long sum = (__force unsigned long)csum;
+
+	sum += (__force unsigned long)saddr->s6_addr32[0];
+	sum += (__force unsigned long)saddr->s6_addr32[1];
+	sum += (__force unsigned long)saddr->s6_addr32[2];
+	sum += (__force unsigned long)saddr->s6_addr32[3];
+
+	sum += (__force unsigned long)daddr->s6_addr32[0];
+	sum += (__force unsigned long)daddr->s6_addr32[1];
+	sum += (__force unsigned long)daddr->s6_addr32[2];
+	sum += (__force unsigned long)daddr->s6_addr32[3];
+
+	ulen = (__force unsigned int)htonl((unsigned int)len);
+	sum += ulen;
+
+	uproto = (__force unsigned int)htonl(proto);
+	sum += uproto;
+
+	/*
+	 * Zbb support saves 4 instructions, so not worth checking without
+	 * alternatives if supported
+	 */
+	if (IS_ENABLED(CONFIG_RISCV_ISA_ZBB) &&
+	    IS_ENABLED(CONFIG_RISCV_ALTERNATIVE)) {
+		unsigned long fold_temp;
+
+		/*
+		 * Zbb is likely available when the kernel is compiled with Zbb
+		 * support, so nop when Zbb is available and jump when Zbb is
+		 * not available.
+		 */
+		asm goto(ALTERNATIVE("j %l[no_zbb]", "nop", 0,
+					      RISCV_ISA_EXT_ZBB, 1)
+				  :
+				  :
+				  :
+				  : no_zbb);
+		asm(".option push					\n\
+		.option arch,+zbb					\n\
+			rori	%[fold_temp], %[sum], 32		\n\
+			add	%[sum], %[fold_temp], %[sum]		\n\
+			srli	%[sum], %[sum], 32			\n\
+			not	%[fold_temp], %[sum]			\n\
+			roriw	%[sum], %[sum], 16			\n\
+			subw	%[sum], %[fold_temp], %[sum]		\n\
+		.option pop"
+		: [sum] "+r" (sum), [fold_temp] "=&r" (fold_temp));
+		return (__force __sum16)(sum >> 16);
+	}
+no_zbb:
+	sum += ror64(sum, 32);
+	sum >>= 32;
+	return csum_fold((__force __wsum)sum);
+}
+EXPORT_SYMBOL(csum_ipv6_magic);
+#endif /* !CONFIG_32BIT */
+
+#ifdef CONFIG_32BIT
+#define OFFSET_MASK 3
+#elif CONFIG_64BIT
+#define OFFSET_MASK 7
+#endif
+
+static inline __no_sanitize_address unsigned long
+do_csum_common(const unsigned long *ptr, const unsigned long *end,
+	       unsigned long data)
+{
+	unsigned int shift;
+	unsigned long csum = 0, carry = 0;
+
+	/*
+	 * Do 32-bit reads on RV32 and 64-bit reads otherwise. This should be
+	 * faster than doing 32-bit reads on architectures that support larger
+	 * reads.
+	 */
+	while (ptr < end) {
+		csum += data;
+		carry += csum < data;
+		data = *(ptr++);
+	}
+
+	/*
+	 * Perform alignment (and over-read) bytes on the tail if any bytes
+	 * leftover.
+	 */
+	shift = ((long)ptr - (long)end) * 8;
+#ifdef __LITTLE_ENDIAN
+	data = (data << shift) >> shift;
+#else
+	data = (data >> shift) << shift;
+#endif
+	csum += data;
+	carry += csum < data;
+	csum += carry;
+	csum += csum < carry;
+
+	return csum;
+}
+
+/*
+ * Algorithm accounts for buff being misaligned.
+ * If buff is not aligned, will over-read bytes but not use the bytes that it
+ * shouldn't. The same thing will occur on the tail-end of the read.
+ */
+static inline __no_sanitize_address unsigned int
+do_csum_with_alignment(const unsigned char *buff, int len)
+{
+	unsigned int offset, shift;
+	unsigned long csum, data;
+	const unsigned long *ptr, *end;
+
+	/*
+	 * Align address to closest word (double word on rv64) that comes before
+	 * buff. This should always be in the same page and cache line.
+	 * Directly call KASAN with the alignment we will be using.
+	 */
+	offset = (unsigned long)buff & OFFSET_MASK;
+	kasan_check_read(buff, len);
+	ptr = (const unsigned long *)(buff - offset);
+
+	/*
+	 * Clear the most significant bytes that were over-read if buff was not
+	 * aligned.
+	 */
+	shift = offset * 8;
+	data = *(ptr++);
+#ifdef __LITTLE_ENDIAN
+	data = (data >> shift) << shift;
+#else
+	data = (data << shift) >> shift;
+#endif
+	end = (const unsigned long *)(buff + len);
+	csum = do_csum_common(ptr, end, data);
+
+#ifdef CC_HAS_ASM_GOTO_TIED_OUTPUT
+	/*
+	 * Zbb support saves 6 instructions, so not worth checking without
+	 * alternatives if supported
+	 */
+	if (IS_ENABLED(CONFIG_RISCV_ISA_ZBB) &&
+	    IS_ENABLED(CONFIG_RISCV_ALTERNATIVE)) {
+		unsigned long fold_temp;
+
+		/*
+		 * Zbb is likely available when the kernel is compiled with Zbb
+		 * support, so nop when Zbb is available and jump when Zbb is
+		 * not available.
+		 */
+		asm goto(ALTERNATIVE("j %l[no_zbb]", "nop", 0,
+					      RISCV_ISA_EXT_ZBB, 1)
+				  :
+				  :
+				  :
+				  : no_zbb);
+
+#ifdef CONFIG_32BIT
+		asm_goto_output(".option push			\n\
+		.option arch,+zbb				\n\
+			rori	%[fold_temp], %[csum], 16	\n\
+			andi	%[offset], %[offset], 1		\n\
+			add	%[csum], %[fold_temp], %[csum]	\n\
+			beq	%[offset], zero, %l[end]	\n\
+			rev8	%[csum], %[csum]		\n\
+		.option pop"
+			: [csum] "+r" (csum), [fold_temp] "=&r" (fold_temp)
+			: [offset] "r" (offset)
+			:
+			: end);
+
+		return (unsigned short)csum;
+#else /* !CONFIG_32BIT */
+		asm_goto_output(".option push			\n\
+		.option arch,+zbb				\n\
+			rori	%[fold_temp], %[csum], 32	\n\
+			add	%[csum], %[fold_temp], %[csum]	\n\
+			srli	%[csum], %[csum], 32		\n\
+			roriw	%[fold_temp], %[csum], 16	\n\
+			addw	%[csum], %[fold_temp], %[csum]	\n\
+			andi	%[offset], %[offset], 1		\n\
+			beq	%[offset], zero, %l[end]	\n\
+			rev8	%[csum], %[csum]		\n\
+		.option pop"
+			: [csum] "+r" (csum), [fold_temp] "=&r" (fold_temp)
+			: [offset] "r" (offset)
+			:
+			: end);
+
+		return (csum << 16) >> 48;
+#endif /* !CONFIG_32BIT */
+end:
+		return csum >> 16;
+	}
+no_zbb:
+#endif /* CC_HAS_ASM_GOTO_TIED_OUTPUT */
+#ifndef CONFIG_32BIT
+	csum += ror64(csum, 32);
+	csum >>= 32;
+#endif
+	csum = (u32)csum + ror32((u32)csum, 16);
+	if (offset & 1)
+		return (u16)swab32(csum);
+	return csum >> 16;
+}
+
+/*
+ * Does not perform alignment, should only be used if machine has fast
+ * misaligned accesses, or when buff is known to be aligned.
+ */
+static inline __no_sanitize_address unsigned int
+do_csum_no_alignment(const unsigned char *buff, int len)
+{
+	unsigned long csum, data;
+	const unsigned long *ptr, *end;
+
+	ptr = (const unsigned long *)(buff);
+	data = *(ptr++);
+
+	kasan_check_read(buff, len);
+
+	end = (const unsigned long *)(buff + len);
+	csum = do_csum_common(ptr, end, data);
+
+	/*
+	 * Zbb support saves 6 instructions, so not worth checking without
+	 * alternatives if supported
+	 */
+	if (IS_ENABLED(CONFIG_RISCV_ISA_ZBB) &&
+	    IS_ENABLED(CONFIG_RISCV_ALTERNATIVE)) {
+		unsigned long fold_temp;
+
+		/*
+		 * Zbb is likely available when the kernel is compiled with Zbb
+		 * support, so nop when Zbb is available and jump when Zbb is
+		 * not available.
+		 */
+		asm goto(ALTERNATIVE("j %l[no_zbb]", "nop", 0,
+					      RISCV_ISA_EXT_ZBB, 1)
+				  :
+				  :
+				  :
+				  : no_zbb);
+
+#ifdef CONFIG_32BIT
+		asm (".option push				\n\
+		.option arch,+zbb				\n\
+			rori	%[fold_temp], %[csum], 16	\n\
+			add	%[csum], %[fold_temp], %[csum]	\n\
+		.option pop"
+			: [csum] "+r" (csum), [fold_temp] "=&r" (fold_temp)
+			:
+			: );
+
+#else /* !CONFIG_32BIT */
+		asm (".option push				\n\
+		.option arch,+zbb				\n\
+			rori	%[fold_temp], %[csum], 32	\n\
+			add	%[csum], %[fold_temp], %[csum]	\n\
+			srli	%[csum], %[csum], 32		\n\
+			roriw	%[fold_temp], %[csum], 16	\n\
+			addw	%[csum], %[fold_temp], %[csum]	\n\
+		.option pop"
+			: [csum] "+r" (csum), [fold_temp] "=&r" (fold_temp)
+			:
+			: );
+#endif /* !CONFIG_32BIT */
+		return csum >> 16;
+	}
+no_zbb:
+#ifndef CONFIG_32BIT
+	csum += ror64(csum, 32);
+	csum >>= 32;
+#endif
+	csum = (u32)csum + ror32((u32)csum, 16);
+	return csum >> 16;
+}
+
+/*
+ * Perform a checksum on an arbitrary memory address.
+ * Will do a light-weight address alignment if buff is misaligned, unless
+ * cpu supports fast misaligned accesses.
+ */
+unsigned int do_csum(const unsigned char *buff, int len)
+{
+	if (unlikely(len <= 0))
+		return 0;
+
+	/*
+	 * Significant performance gains can be seen by not doing alignment
+	 * on machines with fast misaligned accesses.
+	 *
+	 * There is some duplicate code between the "with_alignment" and
+	 * "no_alignment" implmentations, but the overlap is too awkward to be
+	 * able to fit in one function without introducing multiple static
+	 * branches. The largest chunk of overlap was delegated into the
+	 * do_csum_common function.
+	 */
+	if (static_branch_likely(&fast_misaligned_access_speed_key))
+		return do_csum_no_alignment(buff, len);
+
+	if (((unsigned long)buff & OFFSET_MASK) == 0)
+		return do_csum_no_alignment(buff, len);
+
+	return do_csum_with_alignment(buff, len);
+}
diff --git a/arch/riscv/lib/riscv_v_helpers.c b/arch/riscv/lib/riscv_v_helpers.c
new file mode 100644
index 000000000000..be38a93cedae
--- /dev/null
+++ b/arch/riscv/lib/riscv_v_helpers.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2023 SiFive
+ * Author: Andy Chiu <andy.chiu@sifive.com>
+ */
+#include <linux/linkage.h>
+#include <asm/asm.h>
+
+#include <asm/vector.h>
+#include <asm/simd.h>
+
+#ifdef CONFIG_MMU
+#include <asm/asm-prototypes.h>
+#endif
+
+#ifdef CONFIG_MMU
+size_t riscv_v_usercopy_threshold = CONFIG_RISCV_ISA_V_UCOPY_THRESHOLD;
+int __asm_vector_usercopy(void *dst, void *src, size_t n);
+int fallback_scalar_usercopy(void *dst, void *src, size_t n);
+asmlinkage int enter_vector_usercopy(void *dst, void *src, size_t n)
+{
+	size_t remain, copied;
+
+	/* skip has_vector() check because it has been done by the asm  */
+	if (!may_use_simd())
+		goto fallback;
+
+	kernel_vector_begin();
+	remain = __asm_vector_usercopy(dst, src, n);
+	kernel_vector_end();
+
+	if (remain) {
+		copied = n - remain;
+		dst += copied;
+		src += copied;
+		n = remain;
+		goto fallback;
+	}
+
+	return remain;
+
+fallback:
+	return fallback_scalar_usercopy(dst, src, n);
+}
+#endif
diff --git a/arch/riscv/lib/tishift.S b/arch/riscv/lib/tishift.S
index ef90075c4b0a..c8294bf72c06 100644
--- a/arch/riscv/lib/tishift.S
+++ b/arch/riscv/lib/tishift.S
@@ -4,7 +4,7 @@
  */
 
 #include <linux/linkage.h>
-#include <asm-generic/export.h>
+#include <linux/export.h>
 
 SYM_FUNC_START(__lshrti3)
 	beqz	a2, .L1
diff --git a/arch/riscv/lib/uaccess.S b/arch/riscv/lib/uaccess.S
index 3ab438f30d13..bc22c078aba8 100644
--- a/arch/riscv/lib/uaccess.S
+++ b/arch/riscv/lib/uaccess.S
@@ -1,8 +1,10 @@
 #include <linux/linkage.h>
-#include <asm-generic/export.h>
+#include <linux/export.h>
 #include <asm/asm.h>
 #include <asm/asm-extable.h>
 #include <asm/csr.h>
+#include <asm/hwcap.h>
+#include <asm/alternative-macros.h>
 
 	.macro fixup op reg addr lbl
 100:
@@ -11,6 +13,13 @@
 	.endm
 
 SYM_FUNC_START(__asm_copy_to_user)
+#ifdef CONFIG_RISCV_ISA_V
+	ALTERNATIVE("j fallback_scalar_usercopy", "nop", 0, RISCV_ISA_EXT_v, CONFIG_RISCV_ISA_V)
+	REG_L	t0, riscv_v_usercopy_threshold
+	bltu	a2, t0, fallback_scalar_usercopy
+	tail enter_vector_usercopy
+#endif
+SYM_FUNC_START(fallback_scalar_usercopy)
 
 	/* Enable access to user memory */
 	li t6, SR_SUM
@@ -181,6 +190,7 @@ SYM_FUNC_START(__asm_copy_to_user)
 	sub a0, t5, a0
 	ret
 SYM_FUNC_END(__asm_copy_to_user)
+SYM_FUNC_END(fallback_scalar_usercopy)
 EXPORT_SYMBOL(__asm_copy_to_user)
 SYM_FUNC_ALIAS(__asm_copy_from_user, __asm_copy_to_user)
 EXPORT_SYMBOL(__asm_copy_from_user)
diff --git a/arch/riscv/lib/uaccess_vector.S b/arch/riscv/lib/uaccess_vector.S
new file mode 100644
index 000000000000..51ab5588e9ff
--- /dev/null
+++ b/arch/riscv/lib/uaccess_vector.S
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <linux/linkage.h>
+#include <asm-generic/export.h>
+#include <asm/asm.h>
+#include <asm/asm-extable.h>
+#include <asm/csr.h>
+
+#define pDst a0
+#define pSrc a1
+#define iNum a2
+
+#define iVL a3
+
+#define ELEM_LMUL_SETTING m8
+#define vData v0
+
+	.macro fixup op reg addr lbl
+100:
+	\op \reg, \addr
+	_asm_extable	100b, \lbl
+	.endm
+
+SYM_FUNC_START(__asm_vector_usercopy)
+	/* Enable access to user memory */
+	li	t6, SR_SUM
+	csrs	CSR_STATUS, t6
+
+loop:
+	vsetvli iVL, iNum, e8, ELEM_LMUL_SETTING, ta, ma
+	fixup vle8.v vData, (pSrc), 10f
+	sub iNum, iNum, iVL
+	add pSrc, pSrc, iVL
+	fixup vse8.v vData, (pDst), 11f
+	add pDst, pDst, iVL
+	bnez iNum, loop
+
+	/* Exception fixup for vector load is shared with normal exit */
+10:
+	/* Disable access to user memory */
+	csrc	CSR_STATUS, t6
+	mv	a0, iNum
+	ret
+
+	/* Exception fixup code for vector store. */
+11:
+	/* Undo the subtraction after vle8.v */
+	add	iNum, iNum, iVL
+	/* Make sure the scalar fallback skip already processed bytes */
+	csrr	t2, CSR_VSTART
+	sub	iNum, iNum, t2
+	j	10b
+SYM_FUNC_END(__asm_vector_usercopy)
diff --git a/arch/riscv/lib/xor.S b/arch/riscv/lib/xor.S
new file mode 100644
index 000000000000..b28f2430e52f
--- /dev/null
+++ b/arch/riscv/lib/xor.S
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2021 SiFive
+ */
+#include <linux/linkage.h>
+#include <linux/export.h>
+#include <asm/asm.h>
+
+SYM_FUNC_START(xor_regs_2_)
+	vsetvli a3, a0, e8, m8, ta, ma
+	vle8.v v0, (a1)
+	vle8.v v8, (a2)
+	sub a0, a0, a3
+	vxor.vv v16, v0, v8
+	add a2, a2, a3
+	vse8.v v16, (a1)
+	add a1, a1, a3
+	bnez a0, xor_regs_2_
+	ret
+SYM_FUNC_END(xor_regs_2_)
+EXPORT_SYMBOL(xor_regs_2_)
+
+SYM_FUNC_START(xor_regs_3_)
+	vsetvli a4, a0, e8, m8, ta, ma
+	vle8.v v0, (a1)
+	vle8.v v8, (a2)
+	sub a0, a0, a4
+	vxor.vv v0, v0, v8
+	vle8.v v16, (a3)
+	add a2, a2, a4
+	vxor.vv v16, v0, v16
+	add a3, a3, a4
+	vse8.v v16, (a1)
+	add a1, a1, a4
+	bnez a0, xor_regs_3_
+	ret
+SYM_FUNC_END(xor_regs_3_)
+EXPORT_SYMBOL(xor_regs_3_)
+
+SYM_FUNC_START(xor_regs_4_)
+	vsetvli a5, a0, e8, m8, ta, ma
+	vle8.v v0, (a1)
+	vle8.v v8, (a2)
+	sub a0, a0, a5
+	vxor.vv v0, v0, v8
+	vle8.v v16, (a3)
+	add a2, a2, a5
+	vxor.vv v0, v0, v16
+	vle8.v v24, (a4)
+	add a3, a3, a5
+	vxor.vv v16, v0, v24
+	add a4, a4, a5
+	vse8.v v16, (a1)
+	add a1, a1, a5
+	bnez a0, xor_regs_4_
+	ret
+SYM_FUNC_END(xor_regs_4_)
+EXPORT_SYMBOL(xor_regs_4_)
+
+SYM_FUNC_START(xor_regs_5_)
+	vsetvli a6, a0, e8, m8, ta, ma
+	vle8.v v0, (a1)
+	vle8.v v8, (a2)
+	sub a0, a0, a6
+	vxor.vv v0, v0, v8
+	vle8.v v16, (a3)
+	add a2, a2, a6
+	vxor.vv v0, v0, v16
+	vle8.v v24, (a4)
+	add a3, a3, a6
+	vxor.vv v0, v0, v24
+	vle8.v v8, (a5)
+	add a4, a4, a6
+	vxor.vv v16, v0, v8
+	add a5, a5, a6
+	vse8.v v16, (a1)
+	add a1, a1, a6
+	bnez a0, xor_regs_5_
+	ret
+SYM_FUNC_END(xor_regs_5_)
+EXPORT_SYMBOL(xor_regs_5_)
diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile
index 3a4dfc8babcf..2c869f8026a8 100644
--- a/arch/riscv/mm/Makefile
+++ b/arch/riscv/mm/Makefile
@@ -13,10 +13,9 @@ endif
 KCOV_INSTRUMENT_init.o := n
 
 obj-y += init.o
-obj-$(CONFIG_MMU) += extable.o fault.o pageattr.o
+obj-$(CONFIG_MMU) += extable.o fault.o pageattr.o pgtable.o
 obj-y += cacheflush.o
 obj-y += context.o
-obj-y += pgtable.o
 obj-y += pmem.o
 
 ifeq ($(CONFIG_MMU),y)
diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
index 4e4e469b8dd6..843107f834b2 100644
--- a/arch/riscv/mm/dma-noncoherent.c
+++ b/arch/riscv/mm/dma-noncoherent.c
@@ -129,7 +129,7 @@ void arch_dma_prep_coherent(struct page *page, size_t size)
 }
 
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-		const struct iommu_ops *iommu, bool coherent)
+			bool coherent)
 {
 	WARN_TAINT(!coherent && riscv_cbom_block_size > ARCH_DMA_MINALIGN,
 		   TAINT_CPU_OUT_OF_SPEC,
diff --git a/arch/riscv/mm/extable.c b/arch/riscv/mm/extable.c
index 35484d830fd6..dd1530af3ef1 100644
--- a/arch/riscv/mm/extable.c
+++ b/arch/riscv/mm/extable.c
@@ -27,6 +27,14 @@ static bool ex_handler_fixup(const struct exception_table_entry *ex,
 	return true;
 }
 
+static inline unsigned long regs_get_gpr(struct pt_regs *regs, unsigned int offset)
+{
+	if (unlikely(!offset || offset > MAX_REG_OFFSET))
+		return 0;
+
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
 static inline void regs_set_gpr(struct pt_regs *regs, unsigned int offset,
 				unsigned long val)
 {
@@ -50,6 +58,27 @@ static bool ex_handler_uaccess_err_zero(const struct exception_table_entry *ex,
 	return true;
 }
 
+static bool
+ex_handler_load_unaligned_zeropad(const struct exception_table_entry *ex,
+				  struct pt_regs *regs)
+{
+	int reg_data = FIELD_GET(EX_DATA_REG_DATA, ex->data);
+	int reg_addr = FIELD_GET(EX_DATA_REG_ADDR, ex->data);
+	unsigned long data, addr, offset;
+
+	addr = regs_get_gpr(regs, reg_addr * sizeof(unsigned long));
+
+	offset = addr & 0x7UL;
+	addr &= ~0x7UL;
+
+	data = *(unsigned long *)addr >> (offset * 8);
+
+	regs_set_gpr(regs, reg_data * sizeof(unsigned long), data);
+
+	regs->epc = get_ex_fixup(ex);
+	return true;
+}
+
 bool fixup_exception(struct pt_regs *regs)
 {
 	const struct exception_table_entry *ex;
@@ -65,6 +94,8 @@ bool fixup_exception(struct pt_regs *regs)
 		return ex_handler_bpf(ex, regs);
 	case EX_TYPE_UACCESS_ERR_ZERO:
 		return ex_handler_uaccess_err_zero(ex, regs);
+	case EX_TYPE_LOAD_UNALIGNED_ZEROPAD:
+		return ex_handler_load_unaligned_zeropad(ex, regs);
 	}
 
 	BUG();
diff --git a/arch/riscv/mm/fault.c b/arch/riscv/mm/fault.c
index 081339ddf47e..3ba1d4dde5dd 100644
--- a/arch/riscv/mm/fault.c
+++ b/arch/riscv/mm/fault.c
@@ -136,24 +136,24 @@ static inline void vmalloc_fault(struct pt_regs *regs, int code, unsigned long a
 	pgd = (pgd_t *)pfn_to_virt(pfn) + index;
 	pgd_k = init_mm.pgd + index;
 
-	if (!pgd_present(*pgd_k)) {
+	if (!pgd_present(pgdp_get(pgd_k))) {
 		no_context(regs, addr);
 		return;
 	}
-	set_pgd(pgd, *pgd_k);
+	set_pgd(pgd, pgdp_get(pgd_k));
 
 	p4d_k = p4d_offset(pgd_k, addr);
-	if (!p4d_present(*p4d_k)) {
+	if (!p4d_present(p4dp_get(p4d_k))) {
 		no_context(regs, addr);
 		return;
 	}
 
 	pud_k = pud_offset(p4d_k, addr);
-	if (!pud_present(*pud_k)) {
+	if (!pud_present(pudp_get(pud_k))) {
 		no_context(regs, addr);
 		return;
 	}
-	if (pud_leaf(*pud_k))
+	if (pud_leaf(pudp_get(pud_k)))
 		goto flush_tlb;
 
 	/*
@@ -161,11 +161,11 @@ static inline void vmalloc_fault(struct pt_regs *regs, int code, unsigned long a
 	 * to copy individual PTEs
 	 */
 	pmd_k = pmd_offset(pud_k, addr);
-	if (!pmd_present(*pmd_k)) {
+	if (!pmd_present(pmdp_get(pmd_k))) {
 		no_context(regs, addr);
 		return;
 	}
-	if (pmd_leaf(*pmd_k))
+	if (pmd_leaf(pmdp_get(pmd_k)))
 		goto flush_tlb;
 
 	/*
@@ -175,7 +175,7 @@ static inline void vmalloc_fault(struct pt_regs *regs, int code, unsigned long a
 	 * silently loop forever.
 	 */
 	pte_k = pte_offset_kernel(pmd_k, addr);
-	if (!pte_present(*pte_k)) {
+	if (!pte_present(ptep_get(pte_k))) {
 		no_context(regs, addr);
 		return;
 	}
diff --git a/arch/riscv/mm/hugetlbpage.c b/arch/riscv/mm/hugetlbpage.c
index b52f0210481f..5ef2a6891158 100644
--- a/arch/riscv/mm/hugetlbpage.c
+++ b/arch/riscv/mm/hugetlbpage.c
@@ -54,7 +54,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 	}
 
 	if (sz == PMD_SIZE) {
-		if (want_pmd_share(vma, addr) && pud_none(*pud))
+		if (want_pmd_share(vma, addr) && pud_none(pudp_get(pud)))
 			pte = huge_pmd_share(mm, vma, addr, pud);
 		else
 			pte = (pte_t *)pmd_alloc(mm, pud, addr);
@@ -93,11 +93,11 @@ pte_t *huge_pte_offset(struct mm_struct *mm,
 	pmd_t *pmd;
 
 	pgd = pgd_offset(mm, addr);
-	if (!pgd_present(*pgd))
+	if (!pgd_present(pgdp_get(pgd)))
 		return NULL;
 
 	p4d = p4d_offset(pgd, addr);
-	if (!p4d_present(*p4d))
+	if (!p4d_present(p4dp_get(p4d)))
 		return NULL;
 
 	pud = pud_offset(p4d, addr);
@@ -105,7 +105,7 @@ pte_t *huge_pte_offset(struct mm_struct *mm,
 		/* must be pud huge, non-present or none */
 		return (pte_t *)pud;
 
-	if (!pud_present(*pud))
+	if (!pud_present(pudp_get(pud)))
 		return NULL;
 
 	pmd = pmd_offset(pud, addr);
@@ -113,7 +113,7 @@ pte_t *huge_pte_offset(struct mm_struct *mm,
 		/* must be pmd huge, non-present or none */
 		return (pte_t *)pmd;
 
-	if (!pmd_present(*pmd))
+	if (!pmd_present(pmdp_get(pmd)))
 		return NULL;
 
 	for_each_napot_order(order) {
@@ -125,6 +125,26 @@ pte_t *huge_pte_offset(struct mm_struct *mm,
 	return pte;
 }
 
+unsigned long hugetlb_mask_last_page(struct hstate *h)
+{
+	unsigned long hp_size = huge_page_size(h);
+
+	switch (hp_size) {
+#ifndef __PAGETABLE_PMD_FOLDED
+	case PUD_SIZE:
+		return P4D_SIZE - PUD_SIZE;
+#endif
+	case PMD_SIZE:
+		return PUD_SIZE - PMD_SIZE;
+	case napot_cont_size(NAPOT_CONT64KB_ORDER):
+		return PMD_SIZE - napot_cont_size(NAPOT_CONT64KB_ORDER);
+	default:
+		break;
+	}
+
+	return 0UL;
+}
+
 static pte_t get_clear_contig(struct mm_struct *mm,
 			      unsigned long addr,
 			      pte_t *ptep,
@@ -177,13 +197,36 @@ pte_t arch_make_huge_pte(pte_t entry, unsigned int shift, vm_flags_t flags)
 	return entry;
 }
 
+static void clear_flush(struct mm_struct *mm,
+			unsigned long addr,
+			pte_t *ptep,
+			unsigned long pgsize,
+			unsigned long ncontig)
+{
+	struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0);
+	unsigned long i, saddr = addr;
+
+	for (i = 0; i < ncontig; i++, addr += pgsize, ptep++)
+		ptep_get_and_clear(mm, addr, ptep);
+
+	flush_tlb_range(&vma, saddr, addr);
+}
+
+/*
+ * When dealing with NAPOT mappings, the privileged specification indicates that
+ * "if an update needs to be made, the OS generally should first mark all of the
+ * PTEs invalid, then issue SFENCE.VMA instruction(s) covering all 4 KiB regions
+ * within the range, [...] then update the PTE(s), as described in Section
+ * 4.2.1.". That's the equivalent of the Break-Before-Make approach used by
+ * arm64.
+ */
 void set_huge_pte_at(struct mm_struct *mm,
 		     unsigned long addr,
 		     pte_t *ptep,
 		     pte_t pte,
 		     unsigned long sz)
 {
-	unsigned long hugepage_shift;
+	unsigned long hugepage_shift, pgsize;
 	int i, pte_num;
 
 	if (sz >= PGDIR_SIZE)
@@ -198,7 +241,22 @@ void set_huge_pte_at(struct mm_struct *mm,
 		hugepage_shift = PAGE_SHIFT;
 
 	pte_num = sz >> hugepage_shift;
-	for (i = 0; i < pte_num; i++, ptep++, addr += (1 << hugepage_shift))
+	pgsize = 1 << hugepage_shift;
+
+	if (!pte_present(pte)) {
+		for (i = 0; i < pte_num; i++, ptep++, addr += pgsize)
+			set_ptes(mm, addr, ptep, pte, 1);
+		return;
+	}
+
+	if (!pte_napot(pte)) {
+		set_ptes(mm, addr, ptep, pte, 1);
+		return;
+	}
+
+	clear_flush(mm, addr, ptep, pgsize, pte_num);
+
+	for (i = 0; i < pte_num; i++, ptep++, addr += pgsize)
 		set_pte_at(mm, addr, ptep, pte);
 }
 
@@ -293,7 +351,7 @@ void huge_pte_clear(struct mm_struct *mm,
 		    pte_t *ptep,
 		    unsigned long sz)
 {
-	pte_t pte = READ_ONCE(*ptep);
+	pte_t pte = ptep_get(ptep);
 	int i, pte_num;
 
 	if (!pte_napot(pte)) {
@@ -306,7 +364,7 @@ void huge_pte_clear(struct mm_struct *mm,
 		pte_clear(mm, addr, ptep);
 }
 
-static __init bool is_napot_size(unsigned long size)
+static bool is_napot_size(unsigned long size)
 {
 	unsigned long order;
 
@@ -334,7 +392,7 @@ arch_initcall(napot_hugetlbpages_init);
 
 #else
 
-static __init bool is_napot_size(unsigned long size)
+static bool is_napot_size(unsigned long size)
 {
 	return false;
 }
@@ -351,7 +409,7 @@ int pmd_huge(pmd_t pmd)
 	return pmd_leaf(pmd);
 }
 
-bool __init arch_hugetlb_valid_size(unsigned long size)
+static bool __hugetlb_valid_size(unsigned long size)
 {
 	if (size == HPAGE_SIZE)
 		return true;
@@ -363,6 +421,18 @@ bool __init arch_hugetlb_valid_size(unsigned long size)
 		return false;
 }
 
+bool __init arch_hugetlb_valid_size(unsigned long size)
+{
+	return __hugetlb_valid_size(size);
+}
+
+#ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
+bool arch_hugetlb_migration_supported(struct hstate *h)
+{
+	return __hugetlb_valid_size(huge_page_size(h));
+}
+#endif
+
 #ifdef CONFIG_CONTIG_ALLOC
 static __init int gigantic_pages_init(void)
 {
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 2e011cbddf3a..fa34cf55037b 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -174,6 +174,9 @@ void __init mem_init(void)
 
 /* Limit the memory size via mem. */
 static phys_addr_t memory_limit;
+#ifdef CONFIG_XIP_KERNEL
+#define memory_limit	(*(phys_addr_t *)XIP_FIXUP(&memory_limit))
+#endif /* CONFIG_XIP_KERNEL */
 
 static int __init early_mem(char *p)
 {
@@ -952,7 +955,7 @@ static void __init create_fdt_early_page_table(uintptr_t fix_fdt_va,
 	 * setup_vm_final installs the linear mapping. For 32-bit kernel, as the
 	 * kernel is mapped in the linear mapping, that makes no difference.
 	 */
-	dtb_early_va = kernel_mapping_pa_to_va(XIP_FIXUP(dtb_pa));
+	dtb_early_va = kernel_mapping_pa_to_va(dtb_pa);
 #endif
 
 	dtb_early_pa = dtb_pa;
@@ -1055,9 +1058,13 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 #endif
 
 	kernel_map.virt_addr = KERNEL_LINK_ADDR + kernel_map.virt_offset;
-	kernel_map.page_offset = _AC(CONFIG_PAGE_OFFSET, UL);
 
 #ifdef CONFIG_XIP_KERNEL
+#ifdef CONFIG_64BIT
+	kernel_map.page_offset = PAGE_OFFSET_L3;
+#else
+	kernel_map.page_offset = _AC(CONFIG_PAGE_OFFSET, UL);
+#endif
 	kernel_map.xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
 	kernel_map.xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
 
@@ -1067,6 +1074,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 
 	kernel_map.va_kernel_xip_pa_offset = kernel_map.virt_addr - kernel_map.xiprom;
 #else
+	kernel_map.page_offset = _AC(CONFIG_PAGE_OFFSET, UL);
 	kernel_map.phys_addr = (uintptr_t)(&_start);
 	kernel_map.size = (uintptr_t)(&_end) - kernel_map.phys_addr;
 #endif
@@ -1377,16 +1385,39 @@ void __init misc_mem_init(void)
 	early_memtest(min_low_pfn << PAGE_SHIFT, max_low_pfn << PAGE_SHIFT);
 	arch_numa_init();
 	sparse_init();
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+	/* The entire VMEMMAP region has been populated. Flush TLB for this region */
+	local_flush_tlb_kernel_range(VMEMMAP_START, VMEMMAP_END);
+#endif
 	zone_sizes_init();
 	arch_reserve_crashkernel();
 	memblock_dump_all();
 }
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
+void __meminit vmemmap_set_pmd(pmd_t *pmd, void *p, int node,
+			       unsigned long addr, unsigned long next)
+{
+	pmd_set_huge(pmd, virt_to_phys(p), PAGE_KERNEL);
+}
+
+int __meminit vmemmap_check_pmd(pmd_t *pmdp, int node,
+				unsigned long addr, unsigned long next)
+{
+	vmemmap_verify((pte_t *)pmdp, node, addr, next);
+	return 1;
+}
+
 int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
 			       struct vmem_altmap *altmap)
 {
-	return vmemmap_populate_basepages(start, end, node, NULL);
+	/*
+	 * Note that SPARSEMEM_VMEMMAP is only selected for rv64 and that we
+	 * can't use hugepage mappings for 2-level page table because in case of
+	 * memory hotplug, we are not able to update all the page tables with
+	 * the new PMDs.
+	 */
+	return vmemmap_populate_hugepages(start, end, node, NULL);
 }
 #endif
 
diff --git a/arch/riscv/mm/kasan_init.c b/arch/riscv/mm/kasan_init.c
index 5e39dcf23fdb..c301c8d291d2 100644
--- a/arch/riscv/mm/kasan_init.c
+++ b/arch/riscv/mm/kasan_init.c
@@ -31,7 +31,7 @@ static void __init kasan_populate_pte(pmd_t *pmd, unsigned long vaddr, unsigned
 	phys_addr_t phys_addr;
 	pte_t *ptep, *p;
 
-	if (pmd_none(*pmd)) {
+	if (pmd_none(pmdp_get(pmd))) {
 		p = memblock_alloc(PTRS_PER_PTE * sizeof(pte_t), PAGE_SIZE);
 		set_pmd(pmd, pfn_pmd(PFN_DOWN(__pa(p)), PAGE_TABLE));
 	}
@@ -39,7 +39,7 @@ static void __init kasan_populate_pte(pmd_t *pmd, unsigned long vaddr, unsigned
 	ptep = pte_offset_kernel(pmd, vaddr);
 
 	do {
-		if (pte_none(*ptep)) {
+		if (pte_none(ptep_get(ptep))) {
 			phys_addr = memblock_phys_alloc(PAGE_SIZE, PAGE_SIZE);
 			set_pte(ptep, pfn_pte(PFN_DOWN(phys_addr), PAGE_KERNEL));
 			memset(__va(phys_addr), KASAN_SHADOW_INIT, PAGE_SIZE);
@@ -53,7 +53,7 @@ static void __init kasan_populate_pmd(pud_t *pud, unsigned long vaddr, unsigned
 	pmd_t *pmdp, *p;
 	unsigned long next;
 
-	if (pud_none(*pud)) {
+	if (pud_none(pudp_get(pud))) {
 		p = memblock_alloc(PTRS_PER_PMD * sizeof(pmd_t), PAGE_SIZE);
 		set_pud(pud, pfn_pud(PFN_DOWN(__pa(p)), PAGE_TABLE));
 	}
@@ -63,7 +63,8 @@ static void __init kasan_populate_pmd(pud_t *pud, unsigned long vaddr, unsigned
 	do {
 		next = pmd_addr_end(vaddr, end);
 
-		if (pmd_none(*pmdp) && IS_ALIGNED(vaddr, PMD_SIZE) && (next - vaddr) >= PMD_SIZE) {
+		if (pmd_none(pmdp_get(pmdp)) && IS_ALIGNED(vaddr, PMD_SIZE) &&
+		    (next - vaddr) >= PMD_SIZE) {
 			phys_addr = memblock_phys_alloc(PMD_SIZE, PMD_SIZE);
 			if (phys_addr) {
 				set_pmd(pmdp, pfn_pmd(PFN_DOWN(phys_addr), PAGE_KERNEL));
@@ -83,7 +84,7 @@ static void __init kasan_populate_pud(p4d_t *p4d,
 	pud_t *pudp, *p;
 	unsigned long next;
 
-	if (p4d_none(*p4d)) {
+	if (p4d_none(p4dp_get(p4d))) {
 		p = memblock_alloc(PTRS_PER_PUD * sizeof(pud_t), PAGE_SIZE);
 		set_p4d(p4d, pfn_p4d(PFN_DOWN(__pa(p)), PAGE_TABLE));
 	}
@@ -93,7 +94,8 @@ static void __init kasan_populate_pud(p4d_t *p4d,
 	do {
 		next = pud_addr_end(vaddr, end);
 
-		if (pud_none(*pudp) && IS_ALIGNED(vaddr, PUD_SIZE) && (next - vaddr) >= PUD_SIZE) {
+		if (pud_none(pudp_get(pudp)) && IS_ALIGNED(vaddr, PUD_SIZE) &&
+		    (next - vaddr) >= PUD_SIZE) {
 			phys_addr = memblock_phys_alloc(PUD_SIZE, PUD_SIZE);
 			if (phys_addr) {
 				set_pud(pudp, pfn_pud(PFN_DOWN(phys_addr), PAGE_KERNEL));
@@ -113,7 +115,7 @@ static void __init kasan_populate_p4d(pgd_t *pgd,
 	p4d_t *p4dp, *p;
 	unsigned long next;
 
-	if (pgd_none(*pgd)) {
+	if (pgd_none(pgdp_get(pgd))) {
 		p = memblock_alloc(PTRS_PER_P4D * sizeof(p4d_t), PAGE_SIZE);
 		set_pgd(pgd, pfn_pgd(PFN_DOWN(__pa(p)), PAGE_TABLE));
 	}
@@ -123,7 +125,8 @@ static void __init kasan_populate_p4d(pgd_t *pgd,
 	do {
 		next = p4d_addr_end(vaddr, end);
 
-		if (p4d_none(*p4dp) && IS_ALIGNED(vaddr, P4D_SIZE) && (next - vaddr) >= P4D_SIZE) {
+		if (p4d_none(p4dp_get(p4dp)) && IS_ALIGNED(vaddr, P4D_SIZE) &&
+		    (next - vaddr) >= P4D_SIZE) {
 			phys_addr = memblock_phys_alloc(P4D_SIZE, P4D_SIZE);
 			if (phys_addr) {
 				set_p4d(p4dp, pfn_p4d(PFN_DOWN(phys_addr), PAGE_KERNEL));
@@ -145,7 +148,7 @@ static void __init kasan_populate_pgd(pgd_t *pgdp,
 	do {
 		next = pgd_addr_end(vaddr, end);
 
-		if (pgd_none(*pgdp) && IS_ALIGNED(vaddr, PGDIR_SIZE) &&
+		if (pgd_none(pgdp_get(pgdp)) && IS_ALIGNED(vaddr, PGDIR_SIZE) &&
 		    (next - vaddr) >= PGDIR_SIZE) {
 			phys_addr = memblock_phys_alloc(PGDIR_SIZE, PGDIR_SIZE);
 			if (phys_addr) {
@@ -168,7 +171,7 @@ static void __init kasan_early_clear_pud(p4d_t *p4dp,
 	if (!pgtable_l4_enabled) {
 		pudp = (pud_t *)p4dp;
 	} else {
-		base_pud = pt_ops.get_pud_virt(pfn_to_phys(_p4d_pfn(*p4dp)));
+		base_pud = pt_ops.get_pud_virt(pfn_to_phys(_p4d_pfn(p4dp_get(p4dp))));
 		pudp = base_pud + pud_index(vaddr);
 	}
 
@@ -193,7 +196,7 @@ static void __init kasan_early_clear_p4d(pgd_t *pgdp,
 	if (!pgtable_l5_enabled) {
 		p4dp = (p4d_t *)pgdp;
 	} else {
-		base_p4d = pt_ops.get_p4d_virt(pfn_to_phys(_pgd_pfn(*pgdp)));
+		base_p4d = pt_ops.get_p4d_virt(pfn_to_phys(_pgd_pfn(pgdp_get(pgdp))));
 		p4dp = base_p4d + p4d_index(vaddr);
 	}
 
@@ -239,14 +242,14 @@ static void __init kasan_early_populate_pud(p4d_t *p4dp,
 	if (!pgtable_l4_enabled) {
 		pudp = (pud_t *)p4dp;
 	} else {
-		base_pud = pt_ops.get_pud_virt(pfn_to_phys(_p4d_pfn(*p4dp)));
+		base_pud = pt_ops.get_pud_virt(pfn_to_phys(_p4d_pfn(p4dp_get(p4dp))));
 		pudp = base_pud + pud_index(vaddr);
 	}
 
 	do {
 		next = pud_addr_end(vaddr, end);
 
-		if (pud_none(*pudp) && IS_ALIGNED(vaddr, PUD_SIZE) &&
+		if (pud_none(pudp_get(pudp)) && IS_ALIGNED(vaddr, PUD_SIZE) &&
 		    (next - vaddr) >= PUD_SIZE) {
 			phys_addr = __pa((uintptr_t)kasan_early_shadow_pmd);
 			set_pud(pudp, pfn_pud(PFN_DOWN(phys_addr), PAGE_TABLE));
@@ -277,14 +280,14 @@ static void __init kasan_early_populate_p4d(pgd_t *pgdp,
 	if (!pgtable_l5_enabled) {
 		p4dp = (p4d_t *)pgdp;
 	} else {
-		base_p4d = pt_ops.get_p4d_virt(pfn_to_phys(_pgd_pfn(*pgdp)));
+		base_p4d = pt_ops.get_p4d_virt(pfn_to_phys(_pgd_pfn(pgdp_get(pgdp))));
 		p4dp = base_p4d + p4d_index(vaddr);
 	}
 
 	do {
 		next = p4d_addr_end(vaddr, end);
 
-		if (p4d_none(*p4dp) && IS_ALIGNED(vaddr, P4D_SIZE) &&
+		if (p4d_none(p4dp_get(p4dp)) && IS_ALIGNED(vaddr, P4D_SIZE) &&
 		    (next - vaddr) >= P4D_SIZE) {
 			phys_addr = __pa((uintptr_t)kasan_early_shadow_pud);
 			set_p4d(p4dp, pfn_p4d(PFN_DOWN(phys_addr), PAGE_TABLE));
@@ -305,7 +308,7 @@ static void __init kasan_early_populate_pgd(pgd_t *pgdp,
 	do {
 		next = pgd_addr_end(vaddr, end);
 
-		if (pgd_none(*pgdp) && IS_ALIGNED(vaddr, PGDIR_SIZE) &&
+		if (pgd_none(pgdp_get(pgdp)) && IS_ALIGNED(vaddr, PGDIR_SIZE) &&
 		    (next - vaddr) >= PGDIR_SIZE) {
 			phys_addr = __pa((uintptr_t)kasan_early_shadow_p4d);
 			set_pgd(pgdp, pfn_pgd(PFN_DOWN(phys_addr), PAGE_TABLE));
@@ -381,7 +384,7 @@ static void __init kasan_shallow_populate_pud(p4d_t *p4d,
 	do {
 		next = pud_addr_end(vaddr, end);
 
-		if (pud_none(*pud_k)) {
+		if (pud_none(pudp_get(pud_k))) {
 			p = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
 			set_pud(pud_k, pfn_pud(PFN_DOWN(__pa(p)), PAGE_TABLE));
 			continue;
@@ -401,7 +404,7 @@ static void __init kasan_shallow_populate_p4d(pgd_t *pgd,
 	do {
 		next = p4d_addr_end(vaddr, end);
 
-		if (p4d_none(*p4d_k)) {
+		if (p4d_none(p4dp_get(p4d_k))) {
 			p = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
 			set_p4d(p4d_k, pfn_p4d(PFN_DOWN(__pa(p)), PAGE_TABLE));
 			continue;
@@ -420,7 +423,7 @@ static void __init kasan_shallow_populate_pgd(unsigned long vaddr, unsigned long
 	do {
 		next = pgd_addr_end(vaddr, end);
 
-		if (pgd_none(*pgd_k)) {
+		if (pgd_none(pgdp_get(pgd_k))) {
 			p = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
 			set_pgd(pgd_k, pfn_pgd(PFN_DOWN(__pa(p)), PAGE_TABLE));
 			continue;
@@ -438,6 +441,14 @@ static void __init kasan_shallow_populate(void *start, void *end)
 	kasan_shallow_populate_pgd(vaddr, vend);
 }
 
+#ifdef CONFIG_KASAN_VMALLOC
+void __init kasan_populate_early_vm_area_shadow(void *start, unsigned long size)
+{
+	kasan_populate(kasan_mem_to_shadow(start),
+		       kasan_mem_to_shadow(start + size));
+}
+#endif
+
 static void __init create_tmp_mapping(void)
 {
 	void *ptr;
@@ -451,7 +462,7 @@ static void __init create_tmp_mapping(void)
 
 	/* Copy the last p4d since it is shared with the kernel mapping. */
 	if (pgtable_l5_enabled) {
-		ptr = (p4d_t *)pgd_page_vaddr(*pgd_offset_k(KASAN_SHADOW_END));
+		ptr = (p4d_t *)pgd_page_vaddr(pgdp_get(pgd_offset_k(KASAN_SHADOW_END)));
 		memcpy(tmp_p4d, ptr, sizeof(p4d_t) * PTRS_PER_P4D);
 		set_pgd(&tmp_pg_dir[pgd_index(KASAN_SHADOW_END)],
 			pfn_pgd(PFN_DOWN(__pa(tmp_p4d)), PAGE_TABLE));
@@ -462,7 +473,7 @@ static void __init create_tmp_mapping(void)
 
 	/* Copy the last pud since it is shared with the kernel mapping. */
 	if (pgtable_l4_enabled) {
-		ptr = (pud_t *)p4d_page_vaddr(*(base_p4d + p4d_index(KASAN_SHADOW_END)));
+		ptr = (pud_t *)p4d_page_vaddr(p4dp_get(base_p4d + p4d_index(KASAN_SHADOW_END)));
 		memcpy(tmp_pud, ptr, sizeof(pud_t) * PTRS_PER_PUD);
 		set_p4d(&base_p4d[p4d_index(KASAN_SHADOW_END)],
 			pfn_p4d(PFN_DOWN(__pa(tmp_pud)), PAGE_TABLE));
diff --git a/arch/riscv/mm/pageattr.c b/arch/riscv/mm/pageattr.c
index fc5fc4f785c4..410056a50aa9 100644
--- a/arch/riscv/mm/pageattr.c
+++ b/arch/riscv/mm/pageattr.c
@@ -29,7 +29,7 @@ static unsigned long set_pageattr_masks(unsigned long val, struct mm_walk *walk)
 static int pageattr_p4d_entry(p4d_t *p4d, unsigned long addr,
 			      unsigned long next, struct mm_walk *walk)
 {
-	p4d_t val = READ_ONCE(*p4d);
+	p4d_t val = p4dp_get(p4d);
 
 	if (p4d_leaf(val)) {
 		val = __p4d(set_pageattr_masks(p4d_val(val), walk));
@@ -42,7 +42,7 @@ static int pageattr_p4d_entry(p4d_t *p4d, unsigned long addr,
 static int pageattr_pud_entry(pud_t *pud, unsigned long addr,
 			      unsigned long next, struct mm_walk *walk)
 {
-	pud_t val = READ_ONCE(*pud);
+	pud_t val = pudp_get(pud);
 
 	if (pud_leaf(val)) {
 		val = __pud(set_pageattr_masks(pud_val(val), walk));
@@ -55,7 +55,7 @@ static int pageattr_pud_entry(pud_t *pud, unsigned long addr,
 static int pageattr_pmd_entry(pmd_t *pmd, unsigned long addr,
 			      unsigned long next, struct mm_walk *walk)
 {
-	pmd_t val = READ_ONCE(*pmd);
+	pmd_t val = pmdp_get(pmd);
 
 	if (pmd_leaf(val)) {
 		val = __pmd(set_pageattr_masks(pmd_val(val), walk));
@@ -68,7 +68,7 @@ static int pageattr_pmd_entry(pmd_t *pmd, unsigned long addr,
 static int pageattr_pte_entry(pte_t *pte, unsigned long addr,
 			      unsigned long next, struct mm_walk *walk)
 {
-	pte_t val = READ_ONCE(*pte);
+	pte_t val = ptep_get(pte);
 
 	val = __pte(set_pageattr_masks(pte_val(val), walk));
 	set_pte(pte, val);
@@ -108,10 +108,10 @@ static int __split_linear_mapping_pmd(pud_t *pudp,
 		    vaddr <= (vaddr & PMD_MASK) && end >= next)
 			continue;
 
-		if (pmd_leaf(*pmdp)) {
+		if (pmd_leaf(pmdp_get(pmdp))) {
 			struct page *pte_page;
-			unsigned long pfn = _pmd_pfn(*pmdp);
-			pgprot_t prot = __pgprot(pmd_val(*pmdp) & ~_PAGE_PFN_MASK);
+			unsigned long pfn = _pmd_pfn(pmdp_get(pmdp));
+			pgprot_t prot = __pgprot(pmd_val(pmdp_get(pmdp)) & ~_PAGE_PFN_MASK);
 			pte_t *ptep_new;
 			int i;
 
@@ -148,10 +148,10 @@ static int __split_linear_mapping_pud(p4d_t *p4dp,
 		    vaddr <= (vaddr & PUD_MASK) && end >= next)
 			continue;
 
-		if (pud_leaf(*pudp)) {
+		if (pud_leaf(pudp_get(pudp))) {
 			struct page *pmd_page;
-			unsigned long pfn = _pud_pfn(*pudp);
-			pgprot_t prot = __pgprot(pud_val(*pudp) & ~_PAGE_PFN_MASK);
+			unsigned long pfn = _pud_pfn(pudp_get(pudp));
+			pgprot_t prot = __pgprot(pud_val(pudp_get(pudp)) & ~_PAGE_PFN_MASK);
 			pmd_t *pmdp_new;
 			int i;
 
@@ -197,10 +197,10 @@ static int __split_linear_mapping_p4d(pgd_t *pgdp,
 		    vaddr <= (vaddr & P4D_MASK) && end >= next)
 			continue;
 
-		if (p4d_leaf(*p4dp)) {
+		if (p4d_leaf(p4dp_get(p4dp))) {
 			struct page *pud_page;
-			unsigned long pfn = _p4d_pfn(*p4dp);
-			pgprot_t prot = __pgprot(p4d_val(*p4dp) & ~_PAGE_PFN_MASK);
+			unsigned long pfn = _p4d_pfn(p4dp_get(p4dp));
+			pgprot_t prot = __pgprot(p4d_val(p4dp_get(p4dp)) & ~_PAGE_PFN_MASK);
 			pud_t *pudp_new;
 			int i;
 
@@ -305,8 +305,13 @@ static int __set_memory(unsigned long addr, int numpages, pgprot_t set_mask,
 				goto unlock;
 		}
 	} else if (is_kernel_mapping(start) || is_linear_mapping(start)) {
-		lm_start = (unsigned long)lm_alias(start);
-		lm_end = (unsigned long)lm_alias(end);
+		if (is_kernel_mapping(start)) {
+			lm_start = (unsigned long)lm_alias(start);
+			lm_end = (unsigned long)lm_alias(end);
+		} else {
+			lm_start = start;
+			lm_end = end;
+		}
 
 		ret = split_linear_mapping(lm_start, lm_end);
 		if (ret)
@@ -378,7 +383,7 @@ int set_direct_map_invalid_noflush(struct page *page)
 int set_direct_map_default_noflush(struct page *page)
 {
 	return __set_memory((unsigned long)page_address(page), 1,
-			    PAGE_KERNEL, __pgprot(0));
+			    PAGE_KERNEL, __pgprot(_PAGE_EXEC));
 }
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
@@ -406,29 +411,29 @@ bool kernel_page_present(struct page *page)
 	pte_t *pte;
 
 	pgd = pgd_offset_k(addr);
-	if (!pgd_present(*pgd))
+	if (!pgd_present(pgdp_get(pgd)))
 		return false;
-	if (pgd_leaf(*pgd))
+	if (pgd_leaf(pgdp_get(pgd)))
 		return true;
 
 	p4d = p4d_offset(pgd, addr);
-	if (!p4d_present(*p4d))
+	if (!p4d_present(p4dp_get(p4d)))
 		return false;
-	if (p4d_leaf(*p4d))
+	if (p4d_leaf(p4dp_get(p4d)))
 		return true;
 
 	pud = pud_offset(p4d, addr);
-	if (!pud_present(*pud))
+	if (!pud_present(pudp_get(pud)))
 		return false;
-	if (pud_leaf(*pud))
+	if (pud_leaf(pudp_get(pud)))
 		return true;
 
 	pmd = pmd_offset(pud, addr);
-	if (!pmd_present(*pmd))
+	if (!pmd_present(pmdp_get(pmd)))
 		return false;
-	if (pmd_leaf(*pmd))
+	if (pmd_leaf(pmdp_get(pmd)))
 		return true;
 
 	pte = pte_offset_kernel(pmd, addr);
-	return pte_present(*pte);
+	return pte_present(ptep_get(pte));
 }
diff --git a/arch/riscv/mm/pgtable.c b/arch/riscv/mm/pgtable.c
index fef4e7328e49..ef887efcb679 100644
--- a/arch/riscv/mm/pgtable.c
+++ b/arch/riscv/mm/pgtable.c
@@ -5,6 +5,47 @@
 #include <linux/kernel.h>
 #include <linux/pgtable.h>
 
+int ptep_set_access_flags(struct vm_area_struct *vma,
+			  unsigned long address, pte_t *ptep,
+			  pte_t entry, int dirty)
+{
+	if (!pte_same(ptep_get(ptep), entry))
+		__set_pte_at(ptep, entry);
+	/*
+	 * update_mmu_cache will unconditionally execute, handling both
+	 * the case that the PTE changed and the spurious fault case.
+	 */
+	return true;
+}
+
+int ptep_test_and_clear_young(struct vm_area_struct *vma,
+			      unsigned long address,
+			      pte_t *ptep)
+{
+	if (!pte_young(ptep_get(ptep)))
+		return 0;
+	return test_and_clear_bit(_PAGE_ACCESSED_OFFSET, &pte_val(*ptep));
+}
+EXPORT_SYMBOL_GPL(ptep_test_and_clear_young);
+
+#ifdef CONFIG_64BIT
+pud_t *pud_offset(p4d_t *p4d, unsigned long address)
+{
+	if (pgtable_l4_enabled)
+		return p4d_pgtable(p4dp_get(p4d)) + pud_index(address);
+
+	return (pud_t *)p4d;
+}
+
+p4d_t *p4d_offset(pgd_t *pgd, unsigned long address)
+{
+	if (pgtable_l5_enabled)
+		return pgd_pgtable(pgdp_get(pgd)) + p4d_index(address);
+
+	return (p4d_t *)pgd;
+}
+#endif
+
 #ifdef CONFIG_HAVE_ARCH_HUGE_VMAP
 int p4d_set_huge(p4d_t *p4d, phys_addr_t addr, pgprot_t prot)
 {
@@ -25,7 +66,7 @@ int pud_set_huge(pud_t *pud, phys_addr_t phys, pgprot_t prot)
 
 int pud_clear_huge(pud_t *pud)
 {
-	if (!pud_leaf(READ_ONCE(*pud)))
+	if (!pud_leaf(pudp_get(pud)))
 		return 0;
 	pud_clear(pud);
 	return 1;
@@ -33,7 +74,7 @@ int pud_clear_huge(pud_t *pud)
 
 int pud_free_pmd_page(pud_t *pud, unsigned long addr)
 {
-	pmd_t *pmd = pud_pgtable(*pud);
+	pmd_t *pmd = pud_pgtable(pudp_get(pud));
 	int i;
 
 	pud_clear(pud);
@@ -63,7 +104,7 @@ int pmd_set_huge(pmd_t *pmd, phys_addr_t phys, pgprot_t prot)
 
 int pmd_clear_huge(pmd_t *pmd)
 {
-	if (!pmd_leaf(READ_ONCE(*pmd)))
+	if (!pmd_leaf(pmdp_get(pmd)))
 		return 0;
 	pmd_clear(pmd);
 	return 1;
@@ -71,7 +112,7 @@ int pmd_clear_huge(pmd_t *pmd)
 
 int pmd_free_pte_page(pmd_t *pmd, unsigned long addr)
 {
-	pte_t *pte = (pte_t *)pmd_page_vaddr(*pmd);
+	pte_t *pte = (pte_t *)pmd_page_vaddr(pmdp_get(pmd));
 
 	pmd_clear(pmd);
 
@@ -88,7 +129,7 @@ pmd_t pmdp_collapse_flush(struct vm_area_struct *vma,
 	pmd_t pmd = pmdp_huge_get_and_clear(vma->vm_mm, address, pmdp);
 
 	VM_BUG_ON(address & ~HPAGE_PMD_MASK);
-	VM_BUG_ON(pmd_trans_huge(*pmdp));
+	VM_BUG_ON(pmd_trans_huge(pmdp_get(pmdp)));
 	/*
 	 * When leaf PTE entries (regular pages) are collapsed into a leaf
 	 * PMD entry (huge page), a valid non-leaf PTE is converted into a
diff --git a/arch/riscv/mm/tlbflush.c b/arch/riscv/mm/tlbflush.c
index e6659d7368b3..893566e004b7 100644
--- a/arch/riscv/mm/tlbflush.c
+++ b/arch/riscv/mm/tlbflush.c
@@ -66,6 +66,12 @@ static inline void local_flush_tlb_range_asid(unsigned long start,
 		local_flush_tlb_range_threshold_asid(start, size, stride, asid);
 }
 
+/* Flush a range of kernel pages without broadcasting */
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	local_flush_tlb_range_asid(start, end - start, PAGE_SIZE, FLUSH_TLB_NO_ASID);
+}
+
 static void __ipi_flush_tlb_all(void *info)
 {
 	local_flush_tlb_all();
@@ -93,29 +99,23 @@ static void __ipi_flush_tlb_range_asid(void *info)
 	local_flush_tlb_range_asid(d->start, d->size, d->stride, d->asid);
 }
 
-static void __flush_tlb_range(struct mm_struct *mm, unsigned long start,
-			      unsigned long size, unsigned long stride)
+static void __flush_tlb_range(struct cpumask *cmask, unsigned long asid,
+			      unsigned long start, unsigned long size,
+			      unsigned long stride)
 {
 	struct flush_tlb_range_data ftd;
-	const struct cpumask *cmask;
-	unsigned long asid = FLUSH_TLB_NO_ASID;
 	bool broadcast;
 
-	if (mm) {
-		unsigned int cpuid;
+	if (cpumask_empty(cmask))
+		return;
 
-		cmask = mm_cpumask(mm);
-		if (cpumask_empty(cmask))
-			return;
+	if (cmask != cpu_online_mask) {
+		unsigned int cpuid;
 
 		cpuid = get_cpu();
 		/* check if the tlbflush needs to be sent to other CPUs */
 		broadcast = cpumask_any_but(cmask, cpuid) < nr_cpu_ids;
-
-		if (static_branch_unlikely(&use_asid_allocator))
-			asid = atomic_long_read(&mm->context.id) & asid_mask;
 	} else {
-		cmask = cpu_online_mask;
 		broadcast = true;
 	}
 
@@ -135,25 +135,34 @@ static void __flush_tlb_range(struct mm_struct *mm, unsigned long start,
 		local_flush_tlb_range_asid(start, size, stride, asid);
 	}
 
-	if (mm)
+	if (cmask != cpu_online_mask)
 		put_cpu();
 }
 
+static inline unsigned long get_mm_asid(struct mm_struct *mm)
+{
+	return static_branch_unlikely(&use_asid_allocator) ?
+			atomic_long_read(&mm->context.id) & asid_mask : FLUSH_TLB_NO_ASID;
+}
+
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	__flush_tlb_range(mm, 0, FLUSH_TLB_MAX_SIZE, PAGE_SIZE);
+	__flush_tlb_range(mm_cpumask(mm), get_mm_asid(mm),
+			  0, FLUSH_TLB_MAX_SIZE, PAGE_SIZE);
 }
 
 void flush_tlb_mm_range(struct mm_struct *mm,
 			unsigned long start, unsigned long end,
 			unsigned int page_size)
 {
-	__flush_tlb_range(mm, start, end - start, page_size);
+	__flush_tlb_range(mm_cpumask(mm), get_mm_asid(mm),
+			  start, end - start, page_size);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
 {
-	__flush_tlb_range(vma->vm_mm, addr, PAGE_SIZE, PAGE_SIZE);
+	__flush_tlb_range(mm_cpumask(vma->vm_mm), get_mm_asid(vma->vm_mm),
+			  addr, PAGE_SIZE, PAGE_SIZE);
 }
 
 void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
@@ -185,18 +194,45 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		}
 	}
 
-	__flush_tlb_range(vma->vm_mm, start, end - start, stride_size);
+	__flush_tlb_range(mm_cpumask(vma->vm_mm), get_mm_asid(vma->vm_mm),
+			  start, end - start, stride_size);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	__flush_tlb_range(NULL, start, end - start, PAGE_SIZE);
+	__flush_tlb_range((struct cpumask *)cpu_online_mask, FLUSH_TLB_NO_ASID,
+			  start, end - start, PAGE_SIZE);
 }
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			unsigned long end)
 {
-	__flush_tlb_range(vma->vm_mm, start, end - start, PMD_SIZE);
+	__flush_tlb_range(mm_cpumask(vma->vm_mm), get_mm_asid(vma->vm_mm),
+			  start, end - start, PMD_SIZE);
 }
 #endif
+
+bool arch_tlbbatch_should_defer(struct mm_struct *mm)
+{
+	return true;
+}
+
+void arch_tlbbatch_add_pending(struct arch_tlbflush_unmap_batch *batch,
+			       struct mm_struct *mm,
+			       unsigned long uaddr)
+{
+	cpumask_or(&batch->cpumask, &batch->cpumask, mm_cpumask(mm));
+}
+
+void arch_flush_tlb_batched_pending(struct mm_struct *mm)
+{
+	flush_tlb_mm(mm);
+}
+
+void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
+{
+	__flush_tlb_range(&batch->cpumask, FLUSH_TLB_NO_ASID, 0,
+			  FLUSH_TLB_MAX_SIZE, PAGE_SIZE);
+	cpumask_clear(&batch->cpumask);
+}
diff --git a/arch/riscv/net/bpf_jit_comp64.c b/arch/riscv/net/bpf_jit_comp64.c
index 8581693e62d3..719a97e7edb2 100644
--- a/arch/riscv/net/bpf_jit_comp64.c
+++ b/arch/riscv/net/bpf_jit_comp64.c
@@ -795,6 +795,7 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 	struct bpf_tramp_links *fentry = &tlinks[BPF_TRAMP_FENTRY];
 	struct bpf_tramp_links *fexit = &tlinks[BPF_TRAMP_FEXIT];
 	struct bpf_tramp_links *fmod_ret = &tlinks[BPF_TRAMP_MODIFY_RETURN];
+	bool is_struct_ops = flags & BPF_TRAMP_F_INDIRECT;
 	void *orig_call = func_addr;
 	bool save_ret;
 	u32 insn;
@@ -878,7 +879,7 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 
 	stack_size = round_up(stack_size, 16);
 
-	if (func_addr) {
+	if (!is_struct_ops) {
 		/* For the trampoline called from function entry,
 		 * the frame of traced function and the frame of
 		 * trampoline need to be considered.
@@ -998,7 +999,7 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 
 	emit_ld(RV_REG_S1, -sreg_off, RV_REG_FP, ctx);
 
-	if (func_addr) {
+	if (!is_struct_ops) {
 		/* trampoline called from function entry */
 		emit_ld(RV_REG_T0, stack_size - 8, RV_REG_SP, ctx);
 		emit_ld(RV_REG_FP, stack_size - 16, RV_REG_SP, ctx);
@@ -1029,23 +1030,28 @@ out:
 	return ret;
 }
 
-int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
-				void *image_end, const struct btf_func_model *m,
-				u32 flags, struct bpf_tramp_links *tlinks,
-				void *func_addr)
+int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags,
+			     struct bpf_tramp_links *tlinks, void *func_addr)
 {
-	int ret;
+	struct bpf_tramp_image im;
 	struct rv_jit_context ctx;
+	int ret;
 
 	ctx.ninsns = 0;
 	ctx.insns = NULL;
 	ctx.ro_insns = NULL;
-	ret = __arch_prepare_bpf_trampoline(im, m, tlinks, func_addr, flags, &ctx);
-	if (ret < 0)
-		return ret;
+	ret = __arch_prepare_bpf_trampoline(&im, m, tlinks, func_addr, flags, &ctx);
 
-	if (ninsns_rvoff(ret) > (long)image_end - (long)image)
-		return -EFBIG;
+	return ret < 0 ? ret : ninsns_rvoff(ctx.ninsns);
+}
+
+int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
+				void *image_end, const struct btf_func_model *m,
+				u32 flags, struct bpf_tramp_links *tlinks,
+				void *func_addr)
+{
+	int ret;
+	struct rv_jit_context ctx;
 
 	ctx.ninsns = 0;
 	/*
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index d5d8f99d1f25..fe565f3a3a91 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -123,7 +123,6 @@ config S390
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_USE_SYM_ANNOTATIONS
-	select ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	select ARCH_WANTS_NO_INSTR
 	select ARCH_WANT_DEFAULT_BPF_JIT
 	select ARCH_WANT_IPC_PARSE_VERSION
@@ -146,7 +145,7 @@ config S390
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_VDSO_TIME_NS
 	select GENERIC_IOREMAP if PCI
-	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
+	select HAVE_ALIGNED_STRUCT_PAGE
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_JUMP_LABEL_RELATIVE
@@ -217,7 +216,6 @@ config S390
 	select HAVE_VIRT_CPU_ACCOUNTING_IDLE
 	select IOMMU_HELPER		if PCI
 	select IOMMU_SUPPORT		if PCI
-	select KEXEC
 	select MMU_GATHER_MERGE_VMAS
 	select MMU_GATHER_NO_GATHER
 	select MMU_GATHER_RCU_TABLE_FREE
@@ -444,7 +442,7 @@ config COMMAND_LINE_SIZE
 	  line.
 
 config COMPAT
-	def_bool y
+	def_bool n
 	prompt "Kernel support for 31 bit emulation"
 	select ARCH_WANT_OLD_COMPAT_IPC
 	select COMPAT_OLD_SIGACTION
@@ -455,7 +453,9 @@ config COMPAT
 	  Select this option if you want to enable your system kernel to
 	  handle system-calls from ELF binaries for 31 bit ESA.  This option
 	  (and some other stuff like libraries and such) is needed for
-	  executing 31 bit applications.  It is safe to say "Y".
+	  executing 31 bit applications.
+
+	  If unsure say N.
 
 config SMP
 	def_bool y
diff --git a/arch/s390/boot/ipl_parm.c b/arch/s390/boot/ipl_parm.c
index 2ab4872fbee1..b24de9aabf7d 100644
--- a/arch/s390/boot/ipl_parm.c
+++ b/arch/s390/boot/ipl_parm.c
@@ -274,7 +274,7 @@ void parse_boot_command_line(void)
 			memory_limit = round_down(memparse(val, NULL), PAGE_SIZE);
 
 		if (!strcmp(param, "vmalloc") && val) {
-			vmalloc_size = round_up(memparse(val, NULL), PAGE_SIZE);
+			vmalloc_size = round_up(memparse(val, NULL), _SEGMENT_SIZE);
 			vmalloc_size_set = 1;
 		}
 
diff --git a/arch/s390/boot/startup.c b/arch/s390/boot/startup.c
index 8104e0e3d188..9cc76e631759 100644
--- a/arch/s390/boot/startup.c
+++ b/arch/s390/boot/startup.c
@@ -255,7 +255,8 @@ static unsigned long setup_kernel_memory_layout(void)
 	VMALLOC_END = MODULES_VADDR;
 
 	/* allow vmalloc area to occupy up to about 1/2 of the rest virtual space left */
-	vmalloc_size = min(vmalloc_size, round_down(VMALLOC_END / 2, _REGION3_SIZE));
+	vsize = round_down(VMALLOC_END / 2, _SEGMENT_SIZE);
+	vmalloc_size = min(vmalloc_size, vsize);
 	VMALLOC_START = VMALLOC_END - vmalloc_size;
 
 	/* split remaining virtual space between 1:1 mapping & vmemmap array */
diff --git a/arch/s390/configs/compat.config b/arch/s390/configs/compat.config
new file mode 100644
index 000000000000..6fd051453ae8
--- /dev/null
+++ b/arch/s390/configs/compat.config
@@ -0,0 +1,3 @@
+# Help: Enable compat support
+CONFIG_COMPAT=y
+CONFIG_COMPAT_32BIT_TIME=y
diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig
index 6de44ede4e14..c924be0d7ed8 100644
--- a/arch/s390/configs/debug_defconfig
+++ b/arch/s390/configs/debug_defconfig
@@ -40,6 +40,7 @@ CONFIG_SCHED_AUTOGROUP=y
 CONFIG_EXPERT=y
 # CONFIG_SYSFS_SYSCALL is not set
 CONFIG_PROFILING=y
+CONFIG_KEXEC=y
 CONFIG_KEXEC_FILE=y
 CONFIG_KEXEC_SIG=y
 CONFIG_CRASH_DUMP=y
@@ -117,7 +118,6 @@ CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=m
 CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=m
-CONFIG_SMC=m
 CONFIG_SMC_DIAG=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -436,9 +436,6 @@ CONFIG_SCSI_DH_ALUA=m
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_BITMAP_FILE is not set
-CONFIG_MD_LINEAR=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
 CONFIG_MD_CLUSTER=m
 CONFIG_BCACHE=m
 CONFIG_BLK_DEV_DM=y
@@ -638,7 +635,7 @@ CONFIG_CUSE=m
 CONFIG_VIRTIO_FS=m
 CONFIG_OVERLAY_FS=m
 CONFIG_NETFS_STATS=y
-CONFIG_FSCACHE=m
+CONFIG_FSCACHE=y
 CONFIG_CACHEFILES=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
@@ -708,7 +705,6 @@ CONFIG_IMA_DEFAULT_HASH_SHA256=y
 CONFIG_IMA_WRITE_POLICY=y
 CONFIG_IMA_APPRAISE=y
 CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor"
-CONFIG_INIT_STACK_NONE=y
 CONFIG_BUG_ON_DATA_CORRUPTION=y
 CONFIG_CRYPTO_USER=m
 # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
@@ -738,7 +734,6 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_CFB=m
 CONFIG_CRYPTO_HCTR2=m
 CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_LRW=m
diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig
index bcae47da6b7c..c8f0c9fe40d7 100644
--- a/arch/s390/configs/defconfig
+++ b/arch/s390/configs/defconfig
@@ -38,6 +38,7 @@ CONFIG_SCHED_AUTOGROUP=y
 CONFIG_EXPERT=y
 # CONFIG_SYSFS_SYSCALL is not set
 CONFIG_PROFILING=y
+CONFIG_KEXEC=y
 CONFIG_KEXEC_FILE=y
 CONFIG_KEXEC_SIG=y
 CONFIG_CRASH_DUMP=y
@@ -108,7 +109,6 @@ CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=m
 CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=m
-CONFIG_SMC=m
 CONFIG_SMC_DIAG=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -426,9 +426,6 @@ CONFIG_SCSI_DH_ALUA=m
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_BITMAP_FILE is not set
-CONFIG_MD_LINEAR=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
 CONFIG_MD_CLUSTER=m
 CONFIG_BCACHE=m
 CONFIG_BLK_DEV_DM=y
@@ -623,7 +620,7 @@ CONFIG_CUSE=m
 CONFIG_VIRTIO_FS=m
 CONFIG_OVERLAY_FS=m
 CONFIG_NETFS_STATS=y
-CONFIG_FSCACHE=m
+CONFIG_FSCACHE=y
 CONFIG_CACHEFILES=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
@@ -692,7 +689,6 @@ CONFIG_IMA_DEFAULT_HASH_SHA256=y
 CONFIG_IMA_WRITE_POLICY=y
 CONFIG_IMA_APPRAISE=y
 CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor"
-CONFIG_INIT_STACK_NONE=y
 CONFIG_BUG_ON_DATA_CORRUPTION=y
 CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_USER=m
@@ -723,11 +719,9 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_CFB=m
 CONFIG_CRYPTO_HCTR2=m
 CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_OFB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_AEGIS128=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig
index 47028450eee1..c51f3ec4eb28 100644
--- a/arch/s390/configs/zfcpdump_defconfig
+++ b/arch/s390/configs/zfcpdump_defconfig
@@ -8,9 +8,9 @@ CONFIG_BPF_SYSCALL=y
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
 CONFIG_MARCH_Z13=y
-# CONFIG_COMPAT is not set
 CONFIG_NR_CPUS=2
 CONFIG_HZ_100=y
 # CONFIG_CHSC_SCH is not set
@@ -65,7 +65,6 @@ CONFIG_ZFCP=y
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_LSM="yama,loadpin,safesetid,integrity"
-CONFIG_INIT_STACK_NONE=y
 # CONFIG_ZLIB_DFLTCC is not set
 CONFIG_XZ_DEC_MICROLZMA=y
 CONFIG_PRINTK_TIME=y
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index c773820e4af9..c6fe5405de4a 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -597,7 +597,9 @@ static int ctr_aes_crypt(struct skcipher_request *req)
 	 * final block may be < AES_BLOCK_SIZE, copy only nbytes
 	 */
 	if (nbytes) {
-		cpacf_kmctr(sctx->fc, sctx->key, buf, walk.src.virt.addr,
+		memset(buf, 0, AES_BLOCK_SIZE);
+		memcpy(buf, walk.src.virt.addr, nbytes);
+		cpacf_kmctr(sctx->fc, sctx->key, buf, buf,
 			    AES_BLOCK_SIZE, walk.iv);
 		memcpy(walk.dst.virt.addr, buf, nbytes);
 		crypto_inc(walk.iv, AES_BLOCK_SIZE);
diff --git a/arch/s390/crypto/chacha-glue.c b/arch/s390/crypto/chacha-glue.c
index 5fae187f947a..ed9959e6f714 100644
--- a/arch/s390/crypto/chacha-glue.c
+++ b/arch/s390/crypto/chacha-glue.c
@@ -82,7 +82,7 @@ void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src,
 	 * it cannot handle a block of data or less, but otherwise
 	 * it can handle data of arbitrary size
 	 */
-	if (bytes <= CHACHA_BLOCK_SIZE || nrounds != 20 || !MACHINE_HAS_VX)
+	if (bytes <= CHACHA_BLOCK_SIZE || nrounds != 20 || !cpu_has_vx())
 		chacha_crypt_generic(state, dst, src, bytes, nrounds);
 	else
 		chacha20_crypt_s390(state, dst, src, bytes,
diff --git a/arch/s390/crypto/paes_s390.c b/arch/s390/crypto/paes_s390.c
index 8b541e44151d..55ee5567a5ea 100644
--- a/arch/s390/crypto/paes_s390.c
+++ b/arch/s390/crypto/paes_s390.c
@@ -693,9 +693,11 @@ static int ctr_paes_crypt(struct skcipher_request *req)
 	 * final block may be < AES_BLOCK_SIZE, copy only nbytes
 	 */
 	if (nbytes) {
+		memset(buf, 0, AES_BLOCK_SIZE);
+		memcpy(buf, walk.src.virt.addr, nbytes);
 		while (1) {
 			if (cpacf_kmctr(ctx->fc, &param, buf,
-					walk.src.virt.addr, AES_BLOCK_SIZE,
+					buf, AES_BLOCK_SIZE,
 					walk.iv) == AES_BLOCK_SIZE)
 				break;
 			if (__paes_convert_key(ctx))
diff --git a/arch/s390/include/asm/ap.h b/arch/s390/include/asm/ap.h
index 40c2b82f083a..43ac4a64f49b 100644
--- a/arch/s390/include/asm/ap.h
+++ b/arch/s390/include/asm/ap.h
@@ -88,7 +88,7 @@ static inline bool ap_instructions_available(void)
 }
 
 /* TAPQ register GR2 response struct */
-struct ap_tapq_gr2 {
+struct ap_tapq_hwinfo {
 	union {
 		unsigned long value;
 		struct {
@@ -96,11 +96,13 @@ struct ap_tapq_gr2 {
 			unsigned int apinfo : 32; /* ap type, ... */
 		};
 		struct {
-			unsigned int s	   :  1; /* APSC */
-			unsigned int m	   :  1; /* AP4KM */
-			unsigned int c	   :  1; /* AP4KC */
-			unsigned int mode  :  3;
-			unsigned int n	   :  1; /* APXA */
+			unsigned int apsc  :  1; /* APSC */
+			unsigned int mex4k :  1; /* AP4KM */
+			unsigned int crt4k :  1; /* AP4KC */
+			unsigned int cca   :  1; /* D */
+			unsigned int accel :  1; /* A */
+			unsigned int ep11  :  1; /* X */
+			unsigned int apxa  :  1; /* APXA */
 			unsigned int	   :  1;
 			unsigned int class :  8;
 			unsigned int bs	   :  2; /* SE bind/assoc */
@@ -126,11 +128,12 @@ struct ap_tapq_gr2 {
 /**
  * ap_tapq(): Test adjunct processor queue.
  * @qid: The AP queue number
- * @info: Pointer to queue descriptor
+ * @info: Pointer to tapq hwinfo struct
  *
  * Returns AP queue status structure.
  */
-static inline struct ap_queue_status ap_tapq(ap_qid_t qid, struct ap_tapq_gr2 *info)
+static inline struct ap_queue_status ap_tapq(ap_qid_t qid,
+					     struct ap_tapq_hwinfo *info)
 {
 	union ap_queue_status_reg reg1;
 	unsigned long reg2;
@@ -158,7 +161,7 @@ static inline struct ap_queue_status ap_tapq(ap_qid_t qid, struct ap_tapq_gr2 *i
  * Returns AP queue status structure.
  */
 static inline struct ap_queue_status ap_test_queue(ap_qid_t qid, int tbit,
-						   struct ap_tapq_gr2 *info)
+						   struct ap_tapq_hwinfo *info)
 {
 	if (tbit)
 		qid |= 1UL << 23; /* set T bit*/
diff --git a/arch/s390/include/asm/ctlreg.h b/arch/s390/include/asm/ctlreg.h
index 6d4b85f2b541..72a9556d04f3 100644
--- a/arch/s390/include/asm/ctlreg.h
+++ b/arch/s390/include/asm/ctlreg.h
@@ -141,22 +141,26 @@ static __always_inline void local_ctl_store(unsigned int cr, struct ctlreg *reg)
 		: [cr] "i" (cr));
 }
 
-static __always_inline void local_ctl_set_bit(unsigned int cr, unsigned int bit)
+static __always_inline struct ctlreg local_ctl_set_bit(unsigned int cr, unsigned int bit)
 {
-	struct ctlreg reg;
+	struct ctlreg new, old;
 
-	local_ctl_store(cr, &reg);
-	reg.val |= 1UL << bit;
-	local_ctl_load(cr, &reg);
+	local_ctl_store(cr, &old);
+	new = old;
+	new.val |= 1UL << bit;
+	local_ctl_load(cr, &new);
+	return old;
 }
 
-static __always_inline void local_ctl_clear_bit(unsigned int cr, unsigned int bit)
+static __always_inline struct ctlreg local_ctl_clear_bit(unsigned int cr, unsigned int bit)
 {
-	struct ctlreg reg;
+	struct ctlreg new, old;
 
-	local_ctl_store(cr, &reg);
-	reg.val &= ~(1UL << bit);
-	local_ctl_load(cr, &reg);
+	local_ctl_store(cr, &old);
+	new = old;
+	new.val &= ~(1UL << bit);
+	local_ctl_load(cr, &new);
+	return old;
 }
 
 struct lowcore;
diff --git a/arch/s390/include/asm/facility.h b/arch/s390/include/asm/facility.h
index 94b6919026df..796007125dff 100644
--- a/arch/s390/include/asm/facility.h
+++ b/arch/s390/include/asm/facility.h
@@ -111,4 +111,10 @@ static inline void stfle(u64 *stfle_fac_list, int size)
 	preempt_enable();
 }
 
+/**
+ * stfle_size - Actual size of the facility list as specified by stfle
+ * (number of double words)
+ */
+unsigned int stfle_size(void);
+
 #endif /* __ASM_FACILITY_H */
diff --git a/arch/s390/include/asm/fpu/api.h b/arch/s390/include/asm/fpu/api.h
index 9acf48e53a87..d6ca8bc6ca68 100644
--- a/arch/s390/include/asm/fpu/api.h
+++ b/arch/s390/include/asm/fpu/api.h
@@ -46,26 +46,33 @@
 
 #include <linux/preempt.h>
 #include <asm/asm-extable.h>
+#include <asm/fpu/internal.h>
 
 void save_fpu_regs(void);
 void load_fpu_regs(void);
 void __load_fpu_regs(void);
 
-static inline int test_fp_ctl(u32 fpc)
+/**
+ * sfpc_safe - Set floating point control register safely.
+ * @fpc: new value for floating point control register
+ *
+ * Set floating point control register. This may lead to an exception,
+ * since a saved value may have been modified by user space (ptrace,
+ * signal return, kvm registers) to an invalid value. In such a case
+ * set the floating point control register to zero.
+ */
+static inline void sfpc_safe(u32 fpc)
 {
-	u32 orig_fpc;
-	int rc;
-
-	asm volatile(
-		"	efpc    %1\n"
-		"	sfpc	%2\n"
-		"0:	sfpc	%1\n"
-		"	la	%0,0\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "=d" (rc), "=&d" (orig_fpc)
-		: "d" (fpc), "0" (-EINVAL));
-	return rc;
+	asm volatile("\n"
+		"0:	sfpc	%[fpc]\n"
+		"1:	nopr	%%r7\n"
+		".pushsection .fixup, \"ax\"\n"
+		"2:	lghi	%[fpc],0\n"
+		"	jg	0b\n"
+		".popsection\n"
+		EX_TABLE(1b, 2b)
+		: [fpc] "+d" (fpc)
+		: : "memory");
 }
 
 #define KERNEL_FPC		1
diff --git a/arch/s390/include/asm/fpu/internal.h b/arch/s390/include/asm/fpu/internal.h
index 8634581b9011..d511c4cf5afb 100644
--- a/arch/s390/include/asm/fpu/internal.h
+++ b/arch/s390/include/asm/fpu/internal.h
@@ -10,8 +10,14 @@
 #define _ASM_S390_FPU_INTERNAL_H
 
 #include <linux/string.h>
+#include <asm/facility.h>
 #include <asm/fpu/types.h>
 
+static inline bool cpu_has_vx(void)
+{
+	return likely(test_facility(129));
+}
+
 static inline void save_vx_regs(__vector128 *vxrs)
 {
 	asm volatile(
@@ -41,7 +47,7 @@ static inline void fpregs_store(_s390_fp_regs *fpregs, struct fpu *fpu)
 {
 	fpregs->pad = 0;
 	fpregs->fpc = fpu->fpc;
-	if (MACHINE_HAS_VX)
+	if (cpu_has_vx())
 		convert_vx_to_fp((freg_t *)&fpregs->fprs, fpu->vxrs);
 	else
 		memcpy((freg_t *)&fpregs->fprs, fpu->fprs,
@@ -51,7 +57,7 @@ static inline void fpregs_store(_s390_fp_regs *fpregs, struct fpu *fpu)
 static inline void fpregs_load(_s390_fp_regs *fpregs, struct fpu *fpu)
 {
 	fpu->fpc = fpregs->fpc;
-	if (MACHINE_HAS_VX)
+	if (cpu_has_vx())
 		convert_fp_to_vx(fpu->vxrs, (freg_t *)&fpregs->fprs);
 	else
 		memcpy(fpu->fprs, (freg_t *)&fpregs->fprs,
diff --git a/arch/s390/include/asm/irq_work.h b/arch/s390/include/asm/irq_work.h
index 603783766d0a..f00c9f610d5a 100644
--- a/arch/s390/include/asm/irq_work.h
+++ b/arch/s390/include/asm/irq_work.h
@@ -7,6 +7,4 @@ static inline bool arch_irq_work_has_interrupt(void)
 	return true;
 }
 
-void arch_irq_work_raise(void);
-
 #endif /* _ASM_S390_IRQ_WORK_H */
diff --git a/arch/s390/include/asm/jump_label.h b/arch/s390/include/asm/jump_label.h
index 895f774bbcc5..bf78cf381dfc 100644
--- a/arch/s390/include/asm/jump_label.h
+++ b/arch/s390/include/asm/jump_label.h
@@ -25,7 +25,7 @@
  */
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("0:	brcl 0,%l[label]\n"
+	asm goto("0:	brcl 0,%l[label]\n"
 			  ".pushsection __jump_table,\"aw\"\n"
 			  ".balign	8\n"
 			  ".long	0b-.,%l[label]-.\n"
@@ -39,7 +39,7 @@ label:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("0:	brcl 15,%l[label]\n"
+	asm goto("0:	brcl 15,%l[label]\n"
 			  ".pushsection __jump_table,\"aw\"\n"
 			  ".balign	8\n"
 			  ".long	0b-.,%l[label]-.\n"
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 67a298b6cf6e..52664105a473 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -818,7 +818,7 @@ struct s390_io_adapter {
 
 struct kvm_s390_cpu_model {
 	/* facility mask supported by kvm & hosting machine */
-	__u64 fac_mask[S390_ARCH_FAC_LIST_SIZE_U64];
+	__u64 fac_mask[S390_ARCH_FAC_MASK_SIZE_U64];
 	struct kvm_s390_vm_cpu_subfunc subfuncs;
 	/* facility list requested by guest (in dma page) */
 	__u64 *fac_list;
diff --git a/arch/s390/include/asm/pci_io.h b/arch/s390/include/asm/pci_io.h
index 287bb88f7698..2686bee800e3 100644
--- a/arch/s390/include/asm/pci_io.h
+++ b/arch/s390/include/asm/pci_io.h
@@ -11,6 +11,8 @@
 /* I/O size constraints */
 #define ZPCI_MAX_READ_SIZE	8
 #define ZPCI_MAX_WRITE_SIZE	128
+#define ZPCI_BOUNDARY_SIZE	(1 << 12)
+#define ZPCI_BOUNDARY_MASK	(ZPCI_BOUNDARY_SIZE - 1)
 
 /* I/O Map */
 #define ZPCI_IOMAP_SHIFT		48
@@ -125,16 +127,18 @@ out:
 int zpci_write_block(volatile void __iomem *dst, const void *src,
 		     unsigned long len);
 
-static inline u8 zpci_get_max_write_size(u64 src, u64 dst, int len, int max)
+static inline int zpci_get_max_io_size(u64 src, u64 dst, int len, int max)
 {
-	int count = len > max ? max : len, size = 1;
+	int offset = dst & ZPCI_BOUNDARY_MASK;
+	int size;
 
-	while (!(src & 0x1) && !(dst & 0x1) && ((size << 1) <= count)) {
-		dst = dst >> 1;
-		src = src >> 1;
-		size = size << 1;
-	}
-	return size;
+	size = min3(len, ZPCI_BOUNDARY_SIZE - offset, max);
+	if (IS_ALIGNED(src, 8) && IS_ALIGNED(dst, 8) && IS_ALIGNED(size, 8))
+		return size;
+
+	if (size >= 8)
+		return 8;
+	return rounddown_pow_of_two(size);
 }
 
 static inline int zpci_memcpy_fromio(void *dst,
@@ -144,9 +148,9 @@ static inline int zpci_memcpy_fromio(void *dst,
 	int size, rc = 0;
 
 	while (n > 0) {
-		size = zpci_get_max_write_size((u64 __force) src,
-					       (u64) dst, n,
-					       ZPCI_MAX_READ_SIZE);
+		size = zpci_get_max_io_size((u64 __force) src,
+					    (u64) dst, n,
+					    ZPCI_MAX_READ_SIZE);
 		rc = zpci_read_single(dst, src, size);
 		if (rc)
 			break;
@@ -166,9 +170,9 @@ static inline int zpci_memcpy_toio(volatile void __iomem *dst,
 		return -EINVAL;
 
 	while (n > 0) {
-		size = zpci_get_max_write_size((u64 __force) dst,
-					       (u64) src, n,
-					       ZPCI_MAX_WRITE_SIZE);
+		size = zpci_get_max_io_size((u64 __force) dst,
+					    (u64) src, n,
+					    ZPCI_MAX_WRITE_SIZE);
 		if (size > 8) /* main path */
 			rc = zpci_write_block(dst, src, size);
 		else
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 601e87fa8a9a..1299b56e43f6 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -770,6 +770,7 @@ static inline int pud_write(pud_t pud)
 	return (pud_val(pud) & _REGION3_ENTRY_WRITE) != 0;
 }
 
+#define pmd_dirty pmd_dirty
 static inline int pmd_dirty(pmd_t pmd)
 {
 	return (pmd_val(pmd) & _SEGMENT_ENTRY_DIRTY) != 0;
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index c15eadbb9983..c0b6e74d899a 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -184,11 +184,7 @@ struct thread_struct {
 	struct gs_cb *gs_cb;			/* Current guarded storage cb */
 	struct gs_cb *gs_bc_cb;			/* Broadcast guarded storage cb */
 	struct pgm_tdb trap_tdb;		/* Transaction abort diagnose block */
-	/*
-	 * Warning: 'fpu' is dynamically-sized. It *MUST* be at
-	 * the end.
-	 */
-	struct fpu fpu;			/* FP and VX register save area */
+	struct fpu fpu;				/* FP and VX register save area */
 };
 
 /* Flag to disable transactions. */
@@ -331,14 +327,36 @@ static inline unsigned long __extract_psw(void)
 	return (((unsigned long) reg1) << 32) | ((unsigned long) reg2);
 }
 
-static inline void local_mcck_enable(void)
+static inline unsigned long __local_mcck_save(void)
 {
-	__load_psw_mask(__extract_psw() | PSW_MASK_MCHECK);
+	unsigned long mask = __extract_psw();
+
+	__load_psw_mask(mask & ~PSW_MASK_MCHECK);
+	return mask & PSW_MASK_MCHECK;
+}
+
+#define local_mcck_save(mflags)			\
+do {						\
+	typecheck(unsigned long, mflags);	\
+	mflags = __local_mcck_save();		\
+} while (0)
+
+static inline void local_mcck_restore(unsigned long mflags)
+{
+	unsigned long mask = __extract_psw();
+
+	mask &= ~PSW_MASK_MCHECK;
+	__load_psw_mask(mask | mflags);
 }
 
 static inline void local_mcck_disable(void)
 {
-	__load_psw_mask(__extract_psw() & ~PSW_MASK_MCHECK);
+	__local_mcck_save();
+}
+
+static inline void local_mcck_enable(void)
+{
+	__load_psw_mask(__extract_psw() | PSW_MASK_MCHECK);
 }
 
 /*
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index df316436d2e1..03bcaa8effb2 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -28,7 +28,6 @@
 #define MACHINE_FLAG_TOPOLOGY	BIT(10)
 #define MACHINE_FLAG_TE		BIT(11)
 #define MACHINE_FLAG_TLB_LC	BIT(12)
-#define MACHINE_FLAG_VX		BIT(13)
 #define MACHINE_FLAG_TLB_GUEST	BIT(14)
 #define MACHINE_FLAG_NX		BIT(15)
 #define MACHINE_FLAG_GS		BIT(16)
@@ -90,7 +89,6 @@ extern unsigned long mio_wb_bit_mask;
 #define MACHINE_HAS_TOPOLOGY	(S390_lowcore.machine_flags & MACHINE_FLAG_TOPOLOGY)
 #define MACHINE_HAS_TE		(S390_lowcore.machine_flags & MACHINE_FLAG_TE)
 #define MACHINE_HAS_TLB_LC	(S390_lowcore.machine_flags & MACHINE_FLAG_TLB_LC)
-#define MACHINE_HAS_VX		(S390_lowcore.machine_flags & MACHINE_FLAG_VX)
 #define MACHINE_HAS_TLB_GUEST	(S390_lowcore.machine_flags & MACHINE_FLAG_TLB_GUEST)
 #define MACHINE_HAS_NX		(S390_lowcore.machine_flags & MACHINE_FLAG_NX)
 #define MACHINE_HAS_GS		(S390_lowcore.machine_flags & MACHINE_FLAG_GS)
diff --git a/arch/s390/include/asm/sysinfo.h b/arch/s390/include/asm/sysinfo.h
index ab1c6316055c..edca5a751df4 100644
--- a/arch/s390/include/asm/sysinfo.h
+++ b/arch/s390/include/asm/sysinfo.h
@@ -40,6 +40,10 @@ struct sysinfo_1_1_1 {
 	unsigned int ncr;
 	unsigned int npr;
 	unsigned int ntr;
+	char reserved_3[4];
+	char model_var_cap[16];
+	unsigned int model_var_cap_rating;
+	unsigned int nvr;
 };
 
 struct sysinfo_1_2_1 {
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 353def93973b..7a562b4199c8 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -41,7 +41,7 @@ obj-y	+= sysinfo.o lgr.o os_info.o ctlreg.o
 obj-y	+= runtime_instr.o cache.o fpu.o dumpstack.o guarded_storage.o sthyi.o
 obj-y	+= entry.o reipl.o kdebugfs.o alternative.o
 obj-y	+= nospec-branch.o ipl_vmparm.o machine_kexec_reloc.o unwind_bc.o
-obj-y	+= smp.o text_amode31.o stacktrace.o abs_lowcore.o
+obj-y	+= smp.o text_amode31.o stacktrace.o abs_lowcore.o facility.o
 
 extra-y				+= vmlinux.lds
 
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index cecedd01d4ec..f8fc6c25d051 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -29,6 +29,7 @@
 #include <asm/lowcore.h>
 #include <asm/switch_to.h>
 #include <asm/vdso.h>
+#include <asm/fpu/api.h>
 #include "compat_linux.h"
 #include "compat_ptrace.h"
 #include "entry.h"
@@ -98,10 +99,6 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs)
 	if (!is_ri_task(current) && (user_sregs.regs.psw.mask & PSW32_MASK_RI))
 		return -EINVAL;
 
-	/* Test the floating-point-control word. */
-	if (test_fp_ctl(user_sregs.fpregs.fpc))
-		return -EINVAL;
-
 	/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
 	regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
 		(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_USER) << 32 |
@@ -137,7 +134,7 @@ static int save_sigregs_ext32(struct pt_regs *regs,
 		return -EFAULT;
 
 	/* Save vector registers to signal stack */
-	if (MACHINE_HAS_VX) {
+	if (cpu_has_vx()) {
 		for (i = 0; i < __NUM_VXRS_LOW; i++)
 			vxrs[i] = current->thread.fpu.vxrs[i].low;
 		if (__copy_to_user(&sregs_ext->vxrs_low, vxrs,
@@ -165,7 +162,7 @@ static int restore_sigregs_ext32(struct pt_regs *regs,
 		*(__u32 *)&regs->gprs[i] = gprs_high[i];
 
 	/* Restore vector registers from signal stack */
-	if (MACHINE_HAS_VX) {
+	if (cpu_has_vx()) {
 		if (__copy_from_user(vxrs, &sregs_ext->vxrs_low,
 				     sizeof(sregs_ext->vxrs_low)) ||
 		    __copy_from_user(current->thread.fpu.vxrs + __NUM_VXRS_LOW,
@@ -265,7 +262,7 @@ static int setup_frame32(struct ksignal *ksig, sigset_t *set,
 	 * the machine supports it
 	 */
 	frame_size = sizeof(*frame) - sizeof(frame->sregs_ext.__reserved);
-	if (!MACHINE_HAS_VX)
+	if (!cpu_has_vx())
 		frame_size -= sizeof(frame->sregs_ext.vxrs_low) +
 			      sizeof(frame->sregs_ext.vxrs_high);
 	frame = get_sigframe(&ksig->ka, regs, frame_size);
@@ -348,11 +345,12 @@ static int setup_rt_frame32(struct ksignal *ksig, sigset_t *set,
 	 * the machine supports it
 	 */
 	uc_flags = UC_GPRS_HIGH;
-	if (MACHINE_HAS_VX) {
+	if (cpu_has_vx()) {
 		uc_flags |= UC_VXRS;
-	} else
+	} else {
 		frame_size -= sizeof(frame->uc.uc_mcontext_ext.vxrs_low) +
 			      sizeof(frame->uc.uc_mcontext_ext.vxrs_high);
+	}
 	frame = get_sigframe(&ksig->ka, regs, frame_size);
 	if (frame == (void __user *) -1UL)
 		return -EFAULT;
diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c
index 514feadd4c58..5c46c2659305 100644
--- a/arch/s390/kernel/crash_dump.c
+++ b/arch/s390/kernel/crash_dump.c
@@ -22,6 +22,7 @@
 #include <asm/ipl.h>
 #include <asm/sclp.h>
 #include <asm/maccess.h>
+#include <asm/fpu/api.h>
 
 #define PTR_ADD(x, y) (((char *) (x)) + ((unsigned long) (y)))
 #define PTR_SUB(x, y) (((char *) (x)) - ((unsigned long) (y)))
@@ -319,7 +320,7 @@ static void *fill_cpu_elf_notes(void *ptr, int cpu, struct save_area *sa)
 	ptr = nt_init(ptr, NT_S390_TODPREG, &sa->todpreg, sizeof(sa->todpreg));
 	ptr = nt_init(ptr, NT_S390_CTRS, &sa->ctrs, sizeof(sa->ctrs));
 	ptr = nt_init(ptr, NT_S390_PREFIX, &sa->prefix, sizeof(sa->prefix));
-	if (MACHINE_HAS_VX) {
+	if (cpu_has_vx()) {
 		ptr = nt_init(ptr, NT_S390_VXRS_HIGH,
 			      &sa->vxrs_high, sizeof(sa->vxrs_high));
 		ptr = nt_init(ptr, NT_S390_VXRS_LOW,
@@ -343,7 +344,7 @@ static size_t get_cpu_elf_notes_size(void)
 	size +=  nt_size(NT_S390_TODPREG, sizeof(sa->todpreg));
 	size +=  nt_size(NT_S390_CTRS, sizeof(sa->ctrs));
 	size +=  nt_size(NT_S390_PREFIX, sizeof(sa->prefix));
-	if (MACHINE_HAS_VX) {
+	if (cpu_has_vx()) {
 		size += nt_size(NT_S390_VXRS_HIGH, sizeof(sa->vxrs_high));
 		size += nt_size(NT_S390_VXRS_LOW, sizeof(sa->vxrs_low));
 	}
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index eb43e5922a25..2345ea332b97 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -229,10 +229,8 @@ static __init void detect_machine_facilities(void)
 	}
 	if (test_facility(51))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_TLB_LC;
-	if (test_facility(129)) {
-		S390_lowcore.machine_flags |= MACHINE_FLAG_VX;
+	if (test_facility(129))
 		system_ctl_set_bit(0, CR0_VECTOR_BIT);
-	}
 	if (test_facility(130))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_NX;
 	if (test_facility(133))
@@ -271,14 +269,6 @@ static inline void setup_access_registers(void)
 	restore_access_regs(acrs);
 }
 
-static int __init disable_vector_extension(char *str)
-{
-	S390_lowcore.machine_flags &= ~MACHINE_FLAG_VX;
-	system_ctl_clear_bit(0, CR0_VECTOR_BIT);
-	return 0;
-}
-early_param("novx", disable_vector_extension);
-
 char __bootdata(early_command_line)[COMMAND_LINE_SIZE];
 static void __init setup_boot_command_line(void)
 {
diff --git a/arch/s390/kernel/facility.c b/arch/s390/kernel/facility.c
new file mode 100644
index 000000000000..f02127219a27
--- /dev/null
+++ b/arch/s390/kernel/facility.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright IBM Corp. 2023
+ */
+
+#include <asm/facility.h>
+
+unsigned int stfle_size(void)
+{
+	static unsigned int size;
+	unsigned int r;
+	u64 dummy;
+
+	r = READ_ONCE(size);
+	if (!r) {
+		r = __stfle_asm(&dummy, 1) + 1;
+		WRITE_ONCE(size, r);
+	}
+	return r;
+}
+EXPORT_SYMBOL(stfle_size);
diff --git a/arch/s390/kernel/fpu.c b/arch/s390/kernel/fpu.c
index 4666b29ac8a1..a4f3449cc814 100644
--- a/arch/s390/kernel/fpu.c
+++ b/arch/s390/kernel/fpu.c
@@ -24,7 +24,7 @@ void __kernel_fpu_begin(struct kernel_fpu *state, u32 flags)
 		/* Save floating point control */
 		asm volatile("stfpc %0" : "=Q" (state->fpc));
 
-	if (!MACHINE_HAS_VX) {
+	if (!cpu_has_vx()) {
 		if (flags & KERNEL_VXR_V0V7) {
 			/* Save floating-point registers */
 			asm volatile("std 0,%0" : "=Q" (state->fprs[0]));
@@ -106,7 +106,7 @@ void __kernel_fpu_end(struct kernel_fpu *state, u32 flags)
 		/* Restore floating-point controls */
 		asm volatile("lfpc %0" : : "Q" (state->fpc));
 
-	if (!MACHINE_HAS_VX) {
+	if (!cpu_has_vx()) {
 		if (flags & KERNEL_VXR_V0V7) {
 			/* Restore floating-point registers */
 			asm volatile("ld 0,%0" : : "Q" (state->fprs[0]));
@@ -177,11 +177,11 @@ EXPORT_SYMBOL(__kernel_fpu_end);
 
 void __load_fpu_regs(void)
 {
-	struct fpu *state = &current->thread.fpu;
 	unsigned long *regs = current->thread.fpu.regs;
+	struct fpu *state = &current->thread.fpu;
 
-	asm volatile("lfpc %0" : : "Q" (state->fpc));
-	if (likely(MACHINE_HAS_VX)) {
+	sfpc_safe(state->fpc);
+	if (likely(cpu_has_vx())) {
 		asm volatile("lgr	1,%0\n"
 			     "VLM	0,15,0,1\n"
 			     "VLM	16,31,256,1\n"
@@ -208,7 +208,6 @@ void __load_fpu_regs(void)
 	}
 	clear_cpu_flag(CIF_FPU);
 }
-EXPORT_SYMBOL(__load_fpu_regs);
 
 void load_fpu_regs(void)
 {
@@ -232,7 +231,7 @@ void save_fpu_regs(void)
 	regs = current->thread.fpu.regs;
 
 	asm volatile("stfpc %0" : "=Q" (state->fpc));
-	if (likely(MACHINE_HAS_VX)) {
+	if (likely(cpu_has_vx())) {
 		asm volatile("lgr	1,%0\n"
 			     "VSTM	0,15,0,1\n"
 			     "VSTM	16,31,256,1\n"
diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c
index bb0d4d68fcbe..aa22ffc16bcd 100644
--- a/arch/s390/kernel/machine_kexec.c
+++ b/arch/s390/kernel/machine_kexec.c
@@ -91,7 +91,7 @@ static noinline void __machine_kdump(void *image)
 	}
 	/* Store status of the boot CPU */
 	mcesa = __va(S390_lowcore.mcesad & MCESA_ORIGIN_MASK);
-	if (MACHINE_HAS_VX)
+	if (cpu_has_vx())
 		save_vx_regs((__vector128 *) mcesa->vector_save_area);
 	if (MACHINE_HAS_GS) {
 		local_ctl_store(2, &cr2_old.reg);
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index 0daf0f1cdfc9..9ad44c26d1a2 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -32,6 +32,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/pai.h>
 #include <asm/vx-insn.h>
+#include <asm/fpu/api.h>
 
 struct mcck_struct {
 	unsigned int kill_task : 1;
@@ -45,7 +46,7 @@ static DEFINE_PER_CPU(struct mcck_struct, cpu_mcck);
 
 static inline int nmi_needs_mcesa(void)
 {
-	return MACHINE_HAS_VX || MACHINE_HAS_GS;
+	return cpu_has_vx() || MACHINE_HAS_GS;
 }
 
 /*
@@ -159,16 +160,17 @@ NOKPROBE_SYMBOL(s390_handle_damage);
 void s390_handle_mcck(void)
 {
 	struct mcck_struct mcck;
+	unsigned long mflags;
 
 	/*
 	 * Disable machine checks and get the current state of accumulated
 	 * machine checks. Afterwards delete the old state and enable machine
 	 * checks again.
 	 */
-	local_mcck_disable();
+	local_mcck_save(mflags);
 	mcck = *this_cpu_ptr(&cpu_mcck);
 	memset(this_cpu_ptr(&cpu_mcck), 0, sizeof(mcck));
-	local_mcck_enable();
+	local_mcck_restore(mflags);
 
 	if (mcck.channel_report)
 		crw_handle_channel_report();
@@ -234,7 +236,7 @@ static int notrace s390_validate_registers(union mci mci)
 	}
 
 	mcesa = __va(S390_lowcore.mcesad & MCESA_ORIGIN_MASK);
-	if (!MACHINE_HAS_VX) {
+	if (!cpu_has_vx()) {
 		/* Validate floating point registers */
 		asm volatile(
 			"	ld	0,0(%0)\n"
diff --git a/arch/s390/kernel/perf_pai_crypto.c b/arch/s390/kernel/perf_pai_crypto.c
index 39a91b00438a..bf8a672b15a4 100644
--- a/arch/s390/kernel/perf_pai_crypto.c
+++ b/arch/s390/kernel/perf_pai_crypto.c
@@ -111,11 +111,11 @@ static void paicrypt_event_destroy(struct perf_event *event)
 	mutex_unlock(&pai_reserve_mutex);
 }
 
-static u64 paicrypt_getctr(struct paicrypt_map *cpump, int nr, bool kernel)
+static u64 paicrypt_getctr(unsigned long *page, int nr, bool kernel)
 {
 	if (kernel)
 		nr += PAI_CRYPTO_MAXCTR;
-	return cpump->page[nr];
+	return page[nr];
 }
 
 /* Read the counter values. Return value from location in CMP. For event
@@ -129,13 +129,13 @@ static u64 paicrypt_getdata(struct perf_event *event, bool kernel)
 	int i;
 
 	if (event->attr.config != PAI_CRYPTO_BASE) {
-		return paicrypt_getctr(cpump,
+		return paicrypt_getctr(cpump->page,
 				       event->attr.config - PAI_CRYPTO_BASE,
 				       kernel);
 	}
 
 	for (i = 1; i <= paicrypt_cnt; i++) {
-		u64 val = paicrypt_getctr(cpump, i, kernel);
+		u64 val = paicrypt_getctr(cpump->page, i, kernel);
 
 		if (!val)
 			continue;
@@ -317,10 +317,14 @@ static void paicrypt_start(struct perf_event *event, int flags)
 	 * Events are added, deleted and re-added when 2 or more events
 	 * are active at the same time.
 	 */
-	if (!event->hw.last_tag) {
-		event->hw.last_tag = 1;
-		sum = paicrypt_getall(event);		/* Get current value */
-		local64_set(&event->hw.prev_count, sum);
+	if (!event->attr.sample_period) {	/* Counting */
+		if (!event->hw.last_tag) {
+			event->hw.last_tag = 1;
+			sum = paicrypt_getall(event);	/* Get current value */
+			local64_set(&event->hw.prev_count, sum);
+		}
+	} else {				/* Sampling */
+		perf_sched_cb_inc(event->pmu);
 	}
 }
 
@@ -336,19 +340,18 @@ static int paicrypt_add(struct perf_event *event, int flags)
 		local_ctl_set_bit(0, CR0_CRYPTOGRAPHY_COUNTER_BIT);
 	}
 	cpump->event = event;
-	if (flags & PERF_EF_START && !event->attr.sample_period) {
-		/* Only counting needs initial counter value */
+	if (flags & PERF_EF_START)
 		paicrypt_start(event, PERF_EF_RELOAD);
-	}
 	event->hw.state = 0;
-	if (event->attr.sample_period)
-		perf_sched_cb_inc(event->pmu);
 	return 0;
 }
 
 static void paicrypt_stop(struct perf_event *event, int flags)
 {
-	paicrypt_read(event);
+	if (!event->attr.sample_period)	/* Counting */
+		paicrypt_read(event);
+	else				/* Sampling */
+		perf_sched_cb_dec(event->pmu);
 	event->hw.state = PERF_HES_STOPPED;
 }
 
@@ -357,11 +360,7 @@ static void paicrypt_del(struct perf_event *event, int flags)
 	struct paicrypt_mapptr *mp = this_cpu_ptr(paicrypt_root.mapptr);
 	struct paicrypt_map *cpump = mp->mapptr;
 
-	if (event->attr.sample_period)
-		perf_sched_cb_dec(event->pmu);
-	if (!event->attr.sample_period)
-		/* Only counting needs to read counter */
-		paicrypt_stop(event, PERF_EF_UPDATE);
+	paicrypt_stop(event, PERF_EF_UPDATE);
 	if (--cpump->active_events == 0) {
 		local_ctl_clear_bit(0, CR0_CRYPTOGRAPHY_COUNTER_BIT);
 		WRITE_ONCE(S390_lowcore.ccd, 0);
@@ -373,8 +372,7 @@ static void paicrypt_del(struct perf_event *event, int flags)
  * 2 bytes: Number of counter
  * 8 bytes: Value of counter
  */
-static size_t paicrypt_copy(struct pai_userdata *userdata,
-			    struct paicrypt_map *cpump,
+static size_t paicrypt_copy(struct pai_userdata *userdata, unsigned long *page,
 			    bool exclude_user, bool exclude_kernel)
 {
 	int i, outidx = 0;
@@ -383,9 +381,9 @@ static size_t paicrypt_copy(struct pai_userdata *userdata,
 		u64 val = 0;
 
 		if (!exclude_kernel)
-			val += paicrypt_getctr(cpump, i, true);
+			val += paicrypt_getctr(page, i, true);
 		if (!exclude_user)
-			val += paicrypt_getctr(cpump, i, false);
+			val += paicrypt_getctr(page, i, false);
 		if (val) {
 			userdata[outidx].num = i;
 			userdata[outidx].value = val;
@@ -395,25 +393,14 @@ static size_t paicrypt_copy(struct pai_userdata *userdata,
 	return outidx * sizeof(struct pai_userdata);
 }
 
-static int paicrypt_push_sample(void)
+static int paicrypt_push_sample(size_t rawsize, struct paicrypt_map *cpump,
+				struct perf_event *event)
 {
-	struct paicrypt_mapptr *mp = this_cpu_ptr(paicrypt_root.mapptr);
-	struct paicrypt_map *cpump = mp->mapptr;
-	struct perf_event *event = cpump->event;
 	struct perf_sample_data data;
 	struct perf_raw_record raw;
 	struct pt_regs regs;
-	size_t rawsize;
 	int overflow;
 
-	if (!cpump->event)		/* No event active */
-		return 0;
-	rawsize = paicrypt_copy(cpump->save, cpump,
-				cpump->event->attr.exclude_user,
-				cpump->event->attr.exclude_kernel);
-	if (!rawsize)			/* No incremented counters */
-		return 0;
-
 	/* Setup perf sample */
 	memset(&regs, 0, sizeof(regs));
 	memset(&raw, 0, sizeof(raw));
@@ -444,6 +431,25 @@ static int paicrypt_push_sample(void)
 	return overflow;
 }
 
+/* Check if there is data to be saved on schedule out of a task. */
+static int paicrypt_have_sample(void)
+{
+	struct paicrypt_mapptr *mp = this_cpu_ptr(paicrypt_root.mapptr);
+	struct paicrypt_map *cpump = mp->mapptr;
+	struct perf_event *event = cpump->event;
+	size_t rawsize;
+	int rc = 0;
+
+	if (!event)		/* No event active */
+		return 0;
+	rawsize = paicrypt_copy(cpump->save, cpump->page,
+				cpump->event->attr.exclude_user,
+				cpump->event->attr.exclude_kernel);
+	if (rawsize)			/* No incremented counters */
+		rc = paicrypt_push_sample(rawsize, cpump, event);
+	return rc;
+}
+
 /* Called on schedule-in and schedule-out. No access to event structure,
  * but for sampling only event CRYPTO_ALL is allowed.
  */
@@ -453,7 +459,7 @@ static void paicrypt_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sch
 	 * results on schedule_out and if page was dirty, clear values.
 	 */
 	if (!sched_in)
-		paicrypt_push_sample();
+		paicrypt_have_sample();
 }
 
 /* Attribute definitions for paicrypt interface. As with other CPU
diff --git a/arch/s390/kernel/perf_pai_ext.c b/arch/s390/kernel/perf_pai_ext.c
index e7013a2e8960..af7f2b538c8f 100644
--- a/arch/s390/kernel/perf_pai_ext.c
+++ b/arch/s390/kernel/perf_pai_ext.c
@@ -276,9 +276,9 @@ static int paiext_event_init(struct perf_event *event)
 	return 0;
 }
 
-static u64 paiext_getctr(struct paiext_map *cpump, int nr)
+static u64 paiext_getctr(unsigned long *area, int nr)
 {
-	return cpump->area[nr];
+	return area[nr];
 }
 
 /* Read the counter values. Return value from location in buffer. For event
@@ -292,10 +292,11 @@ static u64 paiext_getdata(struct perf_event *event)
 	int i;
 
 	if (event->attr.config != PAI_NNPA_BASE)
-		return paiext_getctr(cpump, event->attr.config - PAI_NNPA_BASE);
+		return paiext_getctr(cpump->area,
+				     event->attr.config - PAI_NNPA_BASE);
 
 	for (i = 1; i <= paiext_cnt; i++)
-		sum += paiext_getctr(cpump, i);
+		sum += paiext_getctr(cpump->area, i);
 
 	return sum;
 }
@@ -320,11 +321,15 @@ static void paiext_start(struct perf_event *event, int flags)
 {
 	u64 sum;
 
-	if (event->hw.last_tag)
-		return;
-	event->hw.last_tag = 1;
-	sum = paiext_getall(event);		/* Get current value */
-	local64_set(&event->hw.prev_count, sum);
+	if (!event->attr.sample_period) {	/* Counting */
+		if (!event->hw.last_tag) {
+			event->hw.last_tag = 1;
+			sum = paiext_getall(event);	/* Get current value */
+			local64_set(&event->hw.prev_count, sum);
+		}
+	} else {				/* Sampling */
+		perf_sched_cb_inc(event->pmu);
+	}
 }
 
 static int paiext_add(struct perf_event *event, int flags)
@@ -341,21 +346,19 @@ static int paiext_add(struct perf_event *event, int flags)
 		debug_sprintf_event(paiext_dbg, 4, "%s 1508 %llx acc %llx\n",
 				    __func__, S390_lowcore.aicd, pcb->acc);
 	}
-	if (flags & PERF_EF_START && !event->attr.sample_period) {
-		/* Only counting needs initial counter value */
+	cpump->event = event;
+	if (flags & PERF_EF_START)
 		paiext_start(event, PERF_EF_RELOAD);
-	}
 	event->hw.state = 0;
-	if (event->attr.sample_period) {
-		cpump->event = event;
-		perf_sched_cb_inc(event->pmu);
-	}
 	return 0;
 }
 
 static void paiext_stop(struct perf_event *event, int flags)
 {
-	paiext_read(event);
+	if (!event->attr.sample_period)	/* Counting */
+		paiext_read(event);
+	else				/* Sampling */
+		perf_sched_cb_dec(event->pmu);
 	event->hw.state = PERF_HES_STOPPED;
 }
 
@@ -365,12 +368,7 @@ static void paiext_del(struct perf_event *event, int flags)
 	struct paiext_map *cpump = mp->mapptr;
 	struct paiext_cb *pcb = cpump->paiext_cb;
 
-	if (event->attr.sample_period)
-		perf_sched_cb_dec(event->pmu);
-	if (!event->attr.sample_period) {
-		/* Only counting needs to read counter */
-		paiext_stop(event, PERF_EF_UPDATE);
-	}
+	paiext_stop(event, PERF_EF_UPDATE);
 	if (--cpump->active_events == 0) {
 		/* Disable CPU instruction lookup for PAIE1 control block */
 		local_ctl_clear_bit(0, CR0_PAI_EXTENSION_BIT);
@@ -386,13 +384,12 @@ static void paiext_del(struct perf_event *event, int flags)
  * 2 bytes: Number of counter
  * 8 bytes: Value of counter
  */
-static size_t paiext_copy(struct paiext_map *cpump)
+static size_t paiext_copy(struct pai_userdata *userdata, unsigned long *area)
 {
-	struct pai_userdata *userdata = cpump->save;
 	int i, outidx = 0;
 
 	for (i = 1; i <= paiext_cnt; i++) {
-		u64 val = paiext_getctr(cpump, i);
+		u64 val = paiext_getctr(area, i);
 
 		if (val) {
 			userdata[outidx].num = i;
@@ -418,21 +415,14 @@ static size_t paiext_copy(struct paiext_map *cpump)
  * sched_task() callback. That callback is not active after paiext_del()
  * returns and has deleted the event on that CPU.
  */
-static int paiext_push_sample(void)
+static int paiext_push_sample(size_t rawsize, struct paiext_map *cpump,
+			      struct perf_event *event)
 {
-	struct paiext_mapptr *mp = this_cpu_ptr(paiext_root.mapptr);
-	struct paiext_map *cpump = mp->mapptr;
-	struct perf_event *event = cpump->event;
 	struct perf_sample_data data;
 	struct perf_raw_record raw;
 	struct pt_regs regs;
-	size_t rawsize;
 	int overflow;
 
-	rawsize = paiext_copy(cpump);
-	if (!rawsize)			/* No incremented counters */
-		return 0;
-
 	/* Setup perf sample */
 	memset(&regs, 0, sizeof(regs));
 	memset(&raw, 0, sizeof(raw));
@@ -461,6 +451,23 @@ static int paiext_push_sample(void)
 	return overflow;
 }
 
+/* Check if there is data to be saved on schedule out of a task. */
+static int paiext_have_sample(void)
+{
+	struct paiext_mapptr *mp = this_cpu_ptr(paiext_root.mapptr);
+	struct paiext_map *cpump = mp->mapptr;
+	struct perf_event *event = cpump->event;
+	size_t rawsize;
+	int rc = 0;
+
+	if (!event)
+		return 0;
+	rawsize = paiext_copy(cpump->save, cpump->area);
+	if (rawsize)			/* Incremented counters */
+		rc = paiext_push_sample(rawsize, cpump, event);
+	return rc;
+}
+
 /* Called on schedule-in and schedule-out. No access to event structure,
  * but for sampling only event NNPA_ALL is allowed.
  */
@@ -470,7 +477,7 @@ static void paiext_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched
 	 * results on schedule_out and if page was dirty, clear values.
 	 */
 	if (!sched_in)
-		paiext_push_sample();
+		paiext_have_sample();
 }
 
 /* Attribute definitions for pai extension1 interface. As with other CPU
diff --git a/arch/s390/kernel/perf_regs.c b/arch/s390/kernel/perf_regs.c
index 6e9e5d5e927e..3d93656bd948 100644
--- a/arch/s390/kernel/perf_regs.c
+++ b/arch/s390/kernel/perf_regs.c
@@ -20,8 +20,10 @@ u64 perf_reg_value(struct pt_regs *regs, int idx)
 			return 0;
 
 		idx -= PERF_REG_S390_FP0;
-		fp = MACHINE_HAS_VX ? *(freg_t *)(current->thread.fpu.vxrs + idx)
-				    : current->thread.fpu.fprs[idx];
+		if (cpu_has_vx())
+			fp = *(freg_t *)(current->thread.fpu.vxrs + idx);
+		else
+			fp = current->thread.fpu.fprs[idx];
 		return fp.ui;
 	}
 
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 258000417724..4e3b366589fb 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -89,7 +89,7 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	 */
 	save_fpu_regs();
 
-	memcpy(dst, src, arch_task_struct_size);
+	*dst = *src;
 	dst->thread.fpu.regs = dst->thread.fpu.fprs;
 
 	/*
diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c
index 0a999c8226d7..65c1464eea4f 100644
--- a/arch/s390/kernel/processor.c
+++ b/arch/s390/kernel/processor.c
@@ -201,11 +201,8 @@ static int __init setup_hwcaps(void)
 	if (MACHINE_HAS_TE)
 		elf_hwcap |= HWCAP_TE;
 
-	/*
-	 * Vector extension can be disabled with the "novx" parameter.
-	 * Use MACHINE_HAS_VX instead of facility bit 129.
-	 */
-	if (MACHINE_HAS_VX) {
+	/* vector */
+	if (test_facility(129)) {
 		elf_hwcap |= HWCAP_VXRS;
 		if (test_facility(134))
 			elf_hwcap |= HWCAP_VXRS_BCD;
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 046403471c5d..f1897a8bb221 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -30,6 +30,7 @@
 #include <asm/switch_to.h>
 #include <asm/runtime_instr.h>
 #include <asm/facility.h>
+#include <asm/fpu/api.h>
 
 #include "entry.h"
 
@@ -254,7 +255,7 @@ static unsigned long __peek_user(struct task_struct *child, addr_t addr)
 		 * or the child->thread.fpu.vxrs array
 		 */
 		offset = addr - offsetof(struct user, regs.fp_regs.fprs);
-		if (MACHINE_HAS_VX)
+		if (cpu_has_vx())
 			tmp = *(addr_t *)
 			       ((addr_t) child->thread.fpu.vxrs + 2*offset);
 		else
@@ -392,8 +393,7 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		/*
 		 * floating point control reg. is in the thread structure
 		 */
-		if ((unsigned int) data != 0 ||
-		    test_fp_ctl(data >> (BITS_PER_LONG - 32)))
+		if ((unsigned int)data != 0)
 			return -EINVAL;
 		child->thread.fpu.fpc = data >> (BITS_PER_LONG - 32);
 
@@ -403,7 +403,7 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		 * or the child->thread.fpu.vxrs array
 		 */
 		offset = addr - offsetof(struct user, regs.fp_regs.fprs);
-		if (MACHINE_HAS_VX)
+		if (cpu_has_vx())
 			*(addr_t *)((addr_t)
 				child->thread.fpu.vxrs + 2*offset) = data;
 		else
@@ -630,7 +630,7 @@ static u32 __peek_user_compat(struct task_struct *child, addr_t addr)
 		 * or the child->thread.fpu.vxrs array
 		 */
 		offset = addr - offsetof(struct compat_user, regs.fp_regs.fprs);
-		if (MACHINE_HAS_VX)
+		if (cpu_has_vx())
 			tmp = *(__u32 *)
 			       ((addr_t) child->thread.fpu.vxrs + 2*offset);
 		else
@@ -748,8 +748,6 @@ static int __poke_user_compat(struct task_struct *child,
 		/*
 		 * floating point control reg. is in the thread structure
 		 */
-		if (test_fp_ctl(tmp))
-			return -EINVAL;
 		child->thread.fpu.fpc = data;
 
 	} else if (addr < offsetof(struct compat_user, regs.fp_regs) + sizeof(s390_fp_regs)) {
@@ -758,7 +756,7 @@ static int __poke_user_compat(struct task_struct *child,
 		 * or the child->thread.fpu.vxrs array
 		 */
 		offset = addr - offsetof(struct compat_user, regs.fp_regs.fprs);
-		if (MACHINE_HAS_VX)
+		if (cpu_has_vx())
 			*(__u32 *)((addr_t)
 				child->thread.fpu.vxrs + 2*offset) = tmp;
 		else
@@ -914,19 +912,18 @@ static int s390_fpregs_set(struct task_struct *target,
 	if (target == current)
 		save_fpu_regs();
 
-	if (MACHINE_HAS_VX)
+	if (cpu_has_vx())
 		convert_vx_to_fp(fprs, target->thread.fpu.vxrs);
 	else
 		memcpy(&fprs, target->thread.fpu.fprs, sizeof(fprs));
 
-	/* If setting FPC, must validate it first. */
 	if (count > 0 && pos < offsetof(s390_fp_regs, fprs)) {
 		u32 ufpc[2] = { target->thread.fpu.fpc, 0 };
 		rc = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &ufpc,
 					0, offsetof(s390_fp_regs, fprs));
 		if (rc)
 			return rc;
-		if (ufpc[1] != 0 || test_fp_ctl(ufpc[0]))
+		if (ufpc[1] != 0)
 			return -EINVAL;
 		target->thread.fpu.fpc = ufpc[0];
 	}
@@ -937,7 +934,7 @@ static int s390_fpregs_set(struct task_struct *target,
 	if (rc)
 		return rc;
 
-	if (MACHINE_HAS_VX)
+	if (cpu_has_vx())
 		convert_fp_to_vx(target->thread.fpu.vxrs, fprs);
 	else
 		memcpy(target->thread.fpu.fprs, &fprs, sizeof(fprs));
@@ -988,7 +985,7 @@ static int s390_vxrs_low_get(struct task_struct *target,
 	__u64 vxrs[__NUM_VXRS_LOW];
 	int i;
 
-	if (!MACHINE_HAS_VX)
+	if (!cpu_has_vx())
 		return -ENODEV;
 	if (target == current)
 		save_fpu_regs();
@@ -1005,7 +1002,7 @@ static int s390_vxrs_low_set(struct task_struct *target,
 	__u64 vxrs[__NUM_VXRS_LOW];
 	int i, rc;
 
-	if (!MACHINE_HAS_VX)
+	if (!cpu_has_vx())
 		return -ENODEV;
 	if (target == current)
 		save_fpu_regs();
@@ -1025,7 +1022,7 @@ static int s390_vxrs_high_get(struct task_struct *target,
 			      const struct user_regset *regset,
 			      struct membuf to)
 {
-	if (!MACHINE_HAS_VX)
+	if (!cpu_has_vx())
 		return -ENODEV;
 	if (target == current)
 		save_fpu_regs();
@@ -1040,7 +1037,7 @@ static int s390_vxrs_high_set(struct task_struct *target,
 {
 	int rc;
 
-	if (!MACHINE_HAS_VX)
+	if (!cpu_has_vx())
 		return -ENODEV;
 	if (target == current)
 		save_fpu_regs();
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 5701356f4f33..d1f3b56e7afc 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -408,15 +408,15 @@ static void __init setup_lowcore(void)
 
 	lc->restart_psw.mask = PSW_KERNEL_BITS & ~PSW_MASK_DAT;
 	lc->restart_psw.addr = __pa(restart_int_handler);
-	lc->external_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_MCHECK;
+	lc->external_new_psw.mask = PSW_KERNEL_BITS;
 	lc->external_new_psw.addr = (unsigned long) ext_int_handler;
-	lc->svc_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_MCHECK;
+	lc->svc_new_psw.mask = PSW_KERNEL_BITS;
 	lc->svc_new_psw.addr = (unsigned long) system_call;
-	lc->program_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_MCHECK;
+	lc->program_new_psw.mask = PSW_KERNEL_BITS;
 	lc->program_new_psw.addr = (unsigned long) pgm_check_handler;
 	lc->mcck_new_psw.mask = PSW_KERNEL_BITS;
 	lc->mcck_new_psw.addr = (unsigned long) mcck_int_handler;
-	lc->io_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_MCHECK;
+	lc->io_new_psw.mask = PSW_KERNEL_BITS;
 	lc->io_new_psw.addr = (unsigned long) io_int_handler;
 	lc->clock_comparator = clock_comparator_max;
 	lc->current_task = (unsigned long)&init_task;
@@ -820,22 +820,6 @@ static void __init setup_randomness(void)
 }
 
 /*
- * Find the correct size for the task_struct. This depends on
- * the size of the struct fpu at the end of the thread_struct
- * which is embedded in the task_struct.
- */
-static void __init setup_task_size(void)
-{
-	int task_size = sizeof(struct task_struct);
-
-	if (!MACHINE_HAS_VX) {
-		task_size -= sizeof(__vector128) * __NUM_VXRS;
-		task_size += sizeof(freg_t) * __NUM_FPRS;
-	}
-	arch_task_struct_size = task_size;
-}
-
-/*
  * Issue diagnose 318 to set the control program name and
  * version codes.
  */
@@ -927,7 +911,6 @@ void __init setup_arch(char **cmdline_p)
 
 	os_info_init();
 	setup_ipl();
-	setup_task_size();
 	setup_control_program_code();
 
 	/* Do some memory reservations *before* memory is added to memblock */
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index d63557d3868c..43e9661cd715 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -12,6 +12,7 @@
 
 #include <linux/sched.h>
 #include <linux/sched/task_stack.h>
+#include <linux/rseq.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
 #include <linux/kernel.h>
@@ -149,10 +150,6 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
 	if (!is_ri_task(current) && (user_sregs.regs.psw.mask & PSW_MASK_RI))
 		return -EINVAL;
 
-	/* Test the floating-point-control word. */
-	if (test_fp_ctl(user_sregs.fpregs.fpc))
-		return -EINVAL;
-
 	/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
 	regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
 		(user_sregs.regs.psw.mask & (PSW_MASK_USER | PSW_MASK_RI));
@@ -182,7 +179,7 @@ static int save_sigregs_ext(struct pt_regs *regs,
 	int i;
 
 	/* Save vector registers to signal stack */
-	if (MACHINE_HAS_VX) {
+	if (cpu_has_vx()) {
 		for (i = 0; i < __NUM_VXRS_LOW; i++)
 			vxrs[i] = current->thread.fpu.vxrs[i].low;
 		if (__copy_to_user(&sregs_ext->vxrs_low, vxrs,
@@ -202,7 +199,7 @@ static int restore_sigregs_ext(struct pt_regs *regs,
 	int i;
 
 	/* Restore vector registers from signal stack */
-	if (MACHINE_HAS_VX) {
+	if (cpu_has_vx()) {
 		if (__copy_from_user(vxrs, &sregs_ext->vxrs_low,
 				     sizeof(sregs_ext->vxrs_low)) ||
 		    __copy_from_user(current->thread.fpu.vxrs + __NUM_VXRS_LOW,
@@ -300,7 +297,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	 * included in the signal frame on a 31-bit system.
 	 */
 	frame_size = sizeof(*frame) - sizeof(frame->sregs_ext);
-	if (MACHINE_HAS_VX)
+	if (cpu_has_vx())
 		frame_size += sizeof(frame->sregs_ext);
 	frame = get_sigframe(ka, regs, frame_size);
 	if (frame == (void __user *) -1UL)
@@ -377,7 +374,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
 	 * included in the signal frame on a 31-bit system.
 	 */
 	uc_flags = 0;
-	if (MACHINE_HAS_VX) {
+	if (cpu_has_vx()) {
 		frame_size += sizeof(_sigregs_ext);
 		uc_flags |= UC_VXRS;
 	}
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index f7fcfff09acf..c39d9f0d4b1c 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -582,7 +582,7 @@ int smp_store_status(int cpu)
 	if (__pcpu_sigp_relax(pcpu->address, SIGP_STORE_STATUS_AT_ADDRESS,
 			      pa) != SIGP_CC_ORDER_CODE_ACCEPTED)
 		return -EIO;
-	if (!MACHINE_HAS_VX && !MACHINE_HAS_GS)
+	if (!cpu_has_vx() && !MACHINE_HAS_GS)
 		return 0;
 	pa = lc->mcesad & MCESA_ORIGIN_MASK;
 	if (MACHINE_HAS_GS)
@@ -638,7 +638,7 @@ void __init smp_save_dump_ipl_cpu(void)
 	copy_oldmem_kernel(regs, __LC_FPREGS_SAVE_AREA, 512);
 	save_area_add_regs(sa, regs);
 	memblock_free(regs, 512);
-	if (MACHINE_HAS_VX)
+	if (cpu_has_vx())
 		save_area_add_vxrs(sa, boot_cpu_vector_save_area);
 }
 
@@ -671,7 +671,7 @@ void __init smp_save_dump_secondary_cpus(void)
 			panic("could not allocate memory for save area\n");
 		__pcpu_sigp_relax(addr, SIGP_STORE_STATUS_AT_ADDRESS, __pa(page));
 		save_area_add_regs(sa, page);
-		if (MACHINE_HAS_VX) {
+		if (cpu_has_vx()) {
 			__pcpu_sigp_relax(addr, SIGP_STORE_ADDITIONAL_STATUS, __pa(page));
 			save_area_add_vxrs(sa, page);
 		}
diff --git a/arch/s390/kernel/syscalls/syscall.tbl b/arch/s390/kernel/syscalls/syscall.tbl
index 86fec9b080f6..095bb86339a7 100644
--- a/arch/s390/kernel/syscalls/syscall.tbl
+++ b/arch/s390/kernel/syscalls/syscall.tbl
@@ -459,3 +459,8 @@
 454  common	futex_wake		sys_futex_wake			sys_futex_wake
 455  common	futex_wait		sys_futex_wait			sys_futex_wait
 456  common	futex_requeue		sys_futex_requeue		sys_futex_requeue
+457  common	statmount		sys_statmount			sys_statmount
+458  common	listmount		sys_listmount			sys_listmount
+459  common	lsm_get_self_attr	sys_lsm_get_self_attr		sys_lsm_get_self_attr
+460  common	lsm_set_self_attr	sys_lsm_set_self_attr		sys_lsm_set_self_attr
+461  common	lsm_list_modules	sys_lsm_list_modules		sys_lsm_list_modules
diff --git a/arch/s390/kernel/sysinfo.c b/arch/s390/kernel/sysinfo.c
index b5e364358ce4..f6f8f498c9be 100644
--- a/arch/s390/kernel/sysinfo.c
+++ b/arch/s390/kernel/sysinfo.c
@@ -81,10 +81,12 @@ static bool convert_ext_name(unsigned char encoding, char *name, size_t len)
 
 static void stsi_1_1_1(struct seq_file *m, struct sysinfo_1_1_1 *info)
 {
+	bool has_var_cap;
 	int i;
 
 	if (stsi(info, 1, 1, 1))
 		return;
+	has_var_cap = !!info->model_var_cap[0];
 	EBCASC(info->manufacturer, sizeof(info->manufacturer));
 	EBCASC(info->type, sizeof(info->type));
 	EBCASC(info->model, sizeof(info->model));
@@ -93,6 +95,8 @@ static void stsi_1_1_1(struct seq_file *m, struct sysinfo_1_1_1 *info)
 	EBCASC(info->model_capacity, sizeof(info->model_capacity));
 	EBCASC(info->model_perm_cap, sizeof(info->model_perm_cap));
 	EBCASC(info->model_temp_cap, sizeof(info->model_temp_cap));
+	if (has_var_cap)
+		EBCASC(info->model_var_cap, sizeof(info->model_var_cap));
 	seq_printf(m, "Manufacturer:         %-16.16s\n", info->manufacturer);
 	seq_printf(m, "Type:                 %-4.4s\n", info->type);
 	if (info->lic)
@@ -120,12 +124,18 @@ static void stsi_1_1_1(struct seq_file *m, struct sysinfo_1_1_1 *info)
 		seq_printf(m, "Model Temp. Capacity: %-16.16s %08u\n",
 			   info->model_temp_cap,
 			   info->model_temp_cap_rating);
+	if (has_var_cap && info->model_var_cap_rating)
+		seq_printf(m, "Model Var. Capacity:  %-16.16s %08u\n",
+			   info->model_var_cap,
+			   info->model_var_cap_rating);
 	if (info->ncr)
 		seq_printf(m, "Nominal Cap. Rating:  %08u\n", info->ncr);
 	if (info->npr)
 		seq_printf(m, "Nominal Perm. Rating: %08u\n", info->npr);
 	if (info->ntr)
 		seq_printf(m, "Nominal Temp. Rating: %08u\n", info->ntr);
+	if (has_var_cap && info->nvr)
+		seq_printf(m, "Nominal Var. Rating:  %08u\n", info->nvr);
 	if (info->cai) {
 		seq_printf(m, "Capacity Adj. Ind.:   %d\n", info->cai);
 		seq_printf(m, "Capacity Ch. Reason:  %d\n", info->ccr);
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 1d2aa448d103..46dac4540ca8 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -43,10 +43,12 @@ static inline void __user *get_trap_ip(struct pt_regs *regs)
 	return (void __user *) (address - (regs->int_code >> 16));
 }
 
+#ifdef CONFIG_GENERIC_BUG
 int is_valid_bugaddr(unsigned long addr)
 {
 	return 1;
 }
+#endif
 
 void do_report_trap(struct pt_regs *regs, int si_signo, int si_code, char *str)
 {
@@ -193,7 +195,7 @@ static void vector_exception(struct pt_regs *regs)
 {
 	int si_code, vic;
 
-	if (!MACHINE_HAS_VX) {
+	if (!cpu_has_vx()) {
 		do_trap(regs, SIGILL, ILL_ILLOPN, "illegal operation");
 		return;
 	}
@@ -286,6 +288,17 @@ static void __init test_monitor_call(void)
 
 void __init trap_init(void)
 {
+	unsigned long flags;
+	struct ctlreg cr0;
+
+	local_irq_save(flags);
+	cr0 = local_ctl_clear_bit(0, CR0_LOW_ADDRESS_PROTECTION_BIT);
+	psw_bits(S390_lowcore.external_new_psw).mcheck = 1;
+	psw_bits(S390_lowcore.program_new_psw).mcheck = 1;
+	psw_bits(S390_lowcore.svc_new_psw).mcheck = 1;
+	psw_bits(S390_lowcore.io_new_psw).mcheck = 1;
+	local_ctl_load(0, &cr0);
+	local_irq_restore(flags);
 	local_mcck_enable();
 	test_monitor_call();
 }
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 2ae201ebf90b..e32ef446f451 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -52,6 +52,7 @@ SECTIONS
 		SOFTIRQENTRY_TEXT
 		FTRACE_HOTPATCH_TRAMPOLINES_TEXT
 		*(.text.*_indirect_*)
+		*(.fixup)
 		*(.gnu.warning)
 		. = ALIGN(PAGE_SIZE);
 		_etext = .;		/* End of text section */
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index 45fdf2a9b2e3..72e9b7dcdf7d 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -20,19 +20,16 @@ config KVM
 	def_tristate y
 	prompt "Kernel-based Virtual Machine (KVM) support"
 	depends on HAVE_KVM
-	select PREEMPT_NOTIFIERS
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select HAVE_KVM_VCPU_ASYNC_IOCTL
-	select HAVE_KVM_EVENTFD
 	select KVM_ASYNC_PF
 	select KVM_ASYNC_PF_SYNC
+	select KVM_COMMON
 	select HAVE_KVM_IRQCHIP
-	select HAVE_KVM_IRQFD
 	select HAVE_KVM_IRQ_ROUTING
 	select HAVE_KVM_INVALID_WAKEUPS
 	select HAVE_KVM_NO_POLL
 	select KVM_VFIO
-	select INTERVAL_TREE
 	select MMU_NOTIFIER
 	help
 	  Support hosting paravirtualized guest machines using the SIE
diff --git a/arch/s390/kvm/guestdbg.c b/arch/s390/kvm/guestdbg.c
index 3765c4223bf9..80879fc73c90 100644
--- a/arch/s390/kvm/guestdbg.c
+++ b/arch/s390/kvm/guestdbg.c
@@ -213,8 +213,8 @@ int kvm_s390_import_bp_data(struct kvm_vcpu *vcpu,
 	else if (dbg->arch.nr_hw_bp > MAX_BP_COUNT)
 		return -EINVAL;
 
-	bp_data = memdup_user(dbg->arch.hw_bp,
-			      sizeof(*bp_data) * dbg->arch.nr_hw_bp);
+	bp_data = memdup_array_user(dbg->arch.hw_bp, dbg->arch.nr_hw_bp,
+				    sizeof(*bp_data));
 	if (IS_ERR(bp_data))
 		return PTR_ERR(bp_data);
 
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index efaebba5ee19..fc4007cc067a 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -639,7 +639,7 @@ static int __write_machine_check(struct kvm_vcpu *vcpu,
 	rc |= put_guest_lc(vcpu, mci.val, (u64 __user *) __LC_MCCK_CODE);
 
 	/* Register-save areas */
-	if (MACHINE_HAS_VX) {
+	if (cpu_has_vx()) {
 		convert_vx_to_fp(fprs, (__vector128 *) vcpu->run->s.regs.vrs);
 		rc |= write_guest_lc(vcpu, __LC_FPREGS_SAVE_AREA, fprs, 128);
 	} else {
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 7aa0e668488f..ea63ac769889 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -563,7 +563,6 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_ENABLE_CAP:
 	case KVM_CAP_S390_CSS_SUPPORT:
 	case KVM_CAP_IOEVENTFD:
-	case KVM_CAP_DEVICE_CTRL:
 	case KVM_CAP_S390_IRQCHIP:
 	case KVM_CAP_VM_ATTRIBUTES:
 	case KVM_CAP_MP_STATE:
@@ -618,7 +617,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = MACHINE_HAS_ESOP;
 		break;
 	case KVM_CAP_S390_VECTOR_REGISTERS:
-		r = MACHINE_HAS_VX;
+		r = test_facility(129);
 		break;
 	case KVM_CAP_S390_RI:
 		r = test_facility(64);
@@ -767,7 +766,7 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap)
 		mutex_lock(&kvm->lock);
 		if (kvm->created_vcpus) {
 			r = -EBUSY;
-		} else if (MACHINE_HAS_VX) {
+		} else if (cpu_has_vx()) {
 			set_kvm_facility(kvm->arch.model.fac_mask, 129);
 			set_kvm_facility(kvm->arch.model.fac_list, 129);
 			if (test_facility(134)) {
@@ -3962,9 +3961,9 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 	if (test_kvm_facility(vcpu->kvm, 156))
 		vcpu->run->kvm_valid_regs |= KVM_SYNC_ETOKEN;
 	/* fprs can be synchronized via vrs, even if the guest has no vx. With
-	 * MACHINE_HAS_VX, (load|store)_fpu_regs() will work with vrs format.
+	 * cpu_has_vx(), (load|store)_fpu_regs() will work with vrs format.
 	 */
-	if (MACHINE_HAS_VX)
+	if (cpu_has_vx())
 		vcpu->run->kvm_valid_regs |= KVM_SYNC_VRS;
 	else
 		vcpu->run->kvm_valid_regs |= KVM_SYNC_FPRS;
@@ -4316,18 +4315,13 @@ int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 
 	vcpu_load(vcpu);
 
-	if (test_fp_ctl(fpu->fpc)) {
-		ret = -EINVAL;
-		goto out;
-	}
 	vcpu->run->s.regs.fpc = fpu->fpc;
-	if (MACHINE_HAS_VX)
+	if (cpu_has_vx())
 		convert_fp_to_vx((__vector128 *) vcpu->run->s.regs.vrs,
 				 (freg_t *) fpu->fprs);
 	else
 		memcpy(vcpu->run->s.regs.fprs, &fpu->fprs, sizeof(fpu->fprs));
 
-out:
 	vcpu_put(vcpu);
 	return ret;
 }
@@ -4336,9 +4330,7 @@ int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 {
 	vcpu_load(vcpu);
 
-	/* make sure we have the latest values */
-	save_fpu_regs();
-	if (MACHINE_HAS_VX)
+	if (cpu_has_vx())
 		convert_vx_to_fp((freg_t *) fpu->fprs,
 				 (__vector128 *) vcpu->run->s.regs.vrs);
 	else
@@ -4963,14 +4955,11 @@ static void sync_regs(struct kvm_vcpu *vcpu)
 	save_fpu_regs();
 	vcpu->arch.host_fpregs.fpc = current->thread.fpu.fpc;
 	vcpu->arch.host_fpregs.regs = current->thread.fpu.regs;
-	if (MACHINE_HAS_VX)
+	if (cpu_has_vx())
 		current->thread.fpu.regs = vcpu->run->s.regs.vrs;
 	else
 		current->thread.fpu.regs = vcpu->run->s.regs.fprs;
 	current->thread.fpu.fpc = vcpu->run->s.regs.fpc;
-	if (test_fp_ctl(current->thread.fpu.fpc))
-		/* User space provided an invalid FPC, let's clear it */
-		current->thread.fpu.fpc = 0;
 
 	/* Sync fmt2 only data */
 	if (likely(!kvm_s390_pv_cpu_is_protected(vcpu))) {
@@ -5145,7 +5134,7 @@ int kvm_s390_store_status_unloaded(struct kvm_vcpu *vcpu, unsigned long gpa)
 		gpa -= __LC_FPREGS_SAVE_AREA;
 
 	/* manually convert vector registers if necessary */
-	if (MACHINE_HAS_VX) {
+	if (cpu_has_vx()) {
 		convert_vx_to_fp(fprs, (__vector128 *) vcpu->run->s.regs.vrs);
 		rc = write_guest_abs(vcpu, gpa + __LC_FPREGS_SAVE_AREA,
 				     fprs, 128);
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 621a17fd1a1b..f875a404a0a0 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -676,8 +676,12 @@ static int handle_pqap(struct kvm_vcpu *vcpu)
 	if (vcpu->kvm->arch.crypto.pqap_hook) {
 		pqap_hook = *vcpu->kvm->arch.crypto.pqap_hook;
 		ret = pqap_hook(vcpu);
-		if (!ret && vcpu->run->s.regs.gprs[1] & 0x00ff0000)
-			kvm_s390_set_psw_cc(vcpu, 3);
+		if (!ret) {
+			if (vcpu->run->s.regs.gprs[1] & 0x00ff0000)
+				kvm_s390_set_psw_cc(vcpu, 3);
+			else
+				kvm_s390_set_psw_cc(vcpu, 0);
+		}
 		up_read(&vcpu->kvm->arch.crypto.pqap_hook_rwsem);
 		return ret;
 	}
diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
index 8207a892bbe2..3af3bd20ac7b 100644
--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -19,6 +19,7 @@
 #include <asm/nmi.h>
 #include <asm/dis.h>
 #include <asm/fpu/api.h>
+#include <asm/facility.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
 
@@ -984,12 +985,26 @@ static void retry_vsie_icpt(struct vsie_page *vsie_page)
 static int handle_stfle(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 {
 	struct kvm_s390_sie_block *scb_s = &vsie_page->scb_s;
-	__u32 fac = READ_ONCE(vsie_page->scb_o->fac) & 0x7ffffff8U;
+	__u32 fac = READ_ONCE(vsie_page->scb_o->fac);
 
+	/*
+	 * Alternate-STFLE-Interpretive-Execution facilities are not supported
+	 * -> format-0 flcb
+	 */
 	if (fac && test_kvm_facility(vcpu->kvm, 7)) {
 		retry_vsie_icpt(vsie_page);
+		/*
+		 * The facility list origin (FLO) is in bits 1 - 28 of the FLD
+		 * so we need to mask here before reading.
+		 */
+		fac = fac & 0x7ffffff8U;
+		/*
+		 * format-0 -> size of nested guest's facility list == guest's size
+		 * guest's size == host's size, since STFLE is interpretatively executed
+		 * using a format-0 for the guest, too.
+		 */
 		if (read_guest_real(vcpu, fac, &vsie_page->fac,
-				    sizeof(vsie_page->fac)))
+				    stfle_size() * sizeof(u64)))
 			return set_validity_icpt(scb_s, 0x1090U);
 		scb_s->fac = (__u32)(__u64) &vsie_page->fac;
 	}
@@ -1220,7 +1235,6 @@ static int acquire_gmap_shadow(struct kvm_vcpu *vcpu,
 	gmap = gmap_shadow(vcpu->arch.gmap, asce, edat);
 	if (IS_ERR(gmap))
 		return PTR_ERR(gmap);
-	gmap->private = vcpu->kvm;
 	vcpu->kvm->stat.gmap_shadow_create++;
 	WRITE_ONCE(vsie_page->gmap, gmap);
 	return 0;
diff --git a/arch/s390/lib/test_unwind.c b/arch/s390/lib/test_unwind.c
index 7231bf97b93a..2848e3fb2ff5 100644
--- a/arch/s390/lib/test_unwind.c
+++ b/arch/s390/lib/test_unwind.c
@@ -350,15 +350,15 @@ static noinline int unwindme_func3(struct unwindme *u)
 /* This function must appear in the backtrace. */
 static noinline int unwindme_func2(struct unwindme *u)
 {
-	unsigned long flags;
+	unsigned long flags, mflags;
 	int rc;
 
 	if (u->flags & UWM_SWITCH_STACK) {
 		local_irq_save(flags);
-		local_mcck_disable();
+		local_mcck_save(mflags);
 		rc = call_on_stack(1, S390_lowcore.nodat_stack,
 				   int, unwindme_func3, struct unwindme *, u);
-		local_mcck_enable();
+		local_mcck_restore(mflags);
 		local_irq_restore(flags);
 		return rc;
 	} else {
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index ab4098886e56..ac4c78546d97 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -280,7 +280,6 @@ static void do_sigbus(struct pt_regs *regs)
 static void do_exception(struct pt_regs *regs, int access)
 {
 	struct vm_area_struct *vma;
-	struct task_struct *tsk;
 	unsigned long address;
 	struct mm_struct *mm;
 	enum fault_type type;
@@ -289,7 +288,6 @@ static void do_exception(struct pt_regs *regs, int access)
 	vm_fault_t fault;
 	bool is_write;
 
-	tsk = current;
 	/*
 	 * The instruction that caused the program check has
 	 * been nullified. Don't signal single step via SIGTRAP.
@@ -297,7 +295,7 @@ static void do_exception(struct pt_regs *regs, int access)
 	clear_thread_flag(TIF_PER_TRAP);
 	if (kprobe_page_fault(regs, 14))
 		return;
-	mm = tsk->mm;
+	mm = current->mm;
 	address = get_fault_address(regs);
 	is_write = fault_is_write(regs);
 	type = get_fault_type(regs);
diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c
index 6f96b5a71c63..8da39deb56ca 100644
--- a/arch/s390/mm/gmap.c
+++ b/arch/s390/mm/gmap.c
@@ -1691,6 +1691,7 @@ struct gmap *gmap_shadow(struct gmap *parent, unsigned long asce,
 		return ERR_PTR(-ENOMEM);
 	new->mm = parent->mm;
 	new->parent = gmap_get(parent);
+	new->private = parent->private;
 	new->orig_asce = asce;
 	new->edat_level = edat_level;
 	new->initialized = false;
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 5cb92941540b..99422926efe1 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -125,32 +125,23 @@ static inline pte_t ptep_flush_lazy(struct mm_struct *mm,
 
 static inline pgste_t pgste_get_lock(pte_t *ptep)
 {
-	unsigned long new = 0;
+	unsigned long value = 0;
 #ifdef CONFIG_PGSTE
-	unsigned long old;
-
-	asm(
-		"	lg	%0,%2\n"
-		"0:	lgr	%1,%0\n"
-		"	nihh	%0,0xff7f\n"	/* clear PCL bit in old */
-		"	oihh	%1,0x0080\n"	/* set PCL bit in new */
-		"	csg	%0,%1,%2\n"
-		"	jl	0b\n"
-		: "=&d" (old), "=&d" (new), "=Q" (ptep[PTRS_PER_PTE])
-		: "Q" (ptep[PTRS_PER_PTE]) : "cc", "memory");
+	unsigned long *ptr = (unsigned long *)(ptep + PTRS_PER_PTE);
+
+	do {
+		value = __atomic64_or_barrier(PGSTE_PCL_BIT, ptr);
+	} while (value & PGSTE_PCL_BIT);
+	value |= PGSTE_PCL_BIT;
 #endif
-	return __pgste(new);
+	return __pgste(value);
 }
 
 static inline void pgste_set_unlock(pte_t *ptep, pgste_t pgste)
 {
 #ifdef CONFIG_PGSTE
-	asm(
-		"	nihh	%1,0xff7f\n"	/* clear PCL bit */
-		"	stg	%1,%0\n"
-		: "=Q" (ptep[PTRS_PER_PTE])
-		: "d" (pgste_val(pgste)), "Q" (ptep[PTRS_PER_PTE])
-		: "cc", "memory");
+	barrier();
+	WRITE_ONCE(*(unsigned long *)(ptep + PTRS_PER_PTE), pgste_val(pgste) & ~PGSTE_PCL_BIT);
 #endif
 }
 
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index bf06b7283f0c..b418333bb086 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -779,7 +779,7 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 				 int i, bool extra_pass, u32 stack_depth)
 {
 	struct bpf_insn *insn = &fp->insnsi[i];
-	s16 branch_oc_off = insn->off;
+	s32 branch_oc_off = insn->off;
 	u32 dst_reg = insn->dst_reg;
 	u32 src_reg = insn->src_reg;
 	int last, insn_count = 1;
@@ -2362,7 +2362,8 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 		return -ENOTSUPP;
 
 	/* Return to %r14, since func_addr and %r0 are not available. */
-	if (!func_addr && !(flags & BPF_TRAMP_F_ORIG_STACK))
+	if ((!func_addr && !(flags & BPF_TRAMP_F_ORIG_STACK)) ||
+	    (flags & BPF_TRAMP_F_INDIRECT))
 		flags |= BPF_TRAMP_F_SKIP_FRAME;
 
 	/*
@@ -2637,6 +2638,21 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 	return 0;
 }
 
+int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags,
+			     struct bpf_tramp_links *tlinks, void *orig_call)
+{
+	struct bpf_tramp_image im;
+	struct bpf_tramp_jit tjit;
+	int ret;
+
+	memset(&tjit, 0, sizeof(tjit));
+
+	ret = __arch_prepare_bpf_trampoline(&im, &tjit, m, flags,
+					    tlinks, orig_call);
+
+	return ret < 0 ? ret : tjit.common.prg;
+}
+
 int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
 				void *image_end, const struct btf_func_model *m,
 				u32 flags, struct bpf_tramp_links *tlinks,
@@ -2644,30 +2660,27 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
 {
 	struct bpf_tramp_jit tjit;
 	int ret;
-	int i;
 
-	for (i = 0; i < 2; i++) {
-		if (i == 0) {
-			/* Compute offsets, check whether the code fits. */
-			memset(&tjit, 0, sizeof(tjit));
-		} else {
-			/* Generate the code. */
-			tjit.common.prg = 0;
-			tjit.common.prg_buf = image;
-		}
-		ret = __arch_prepare_bpf_trampoline(im, &tjit, m, flags,
-						    tlinks, func_addr);
-		if (ret < 0)
-			return ret;
-		if (tjit.common.prg > (char *)image_end - (char *)image)
-			/*
-			 * Use the same error code as for exceeding
-			 * BPF_MAX_TRAMP_LINKS.
-			 */
-			return -E2BIG;
-	}
+	/* Compute offsets, check whether the code fits. */
+	memset(&tjit, 0, sizeof(tjit));
+	ret = __arch_prepare_bpf_trampoline(im, &tjit, m, flags,
+					    tlinks, func_addr);
+
+	if (ret < 0)
+		return ret;
+	if (tjit.common.prg > (char *)image_end - (char *)image)
+		/*
+		 * Use the same error code as for exceeding
+		 * BPF_MAX_TRAMP_LINKS.
+		 */
+		return -E2BIG;
+
+	tjit.common.prg = 0;
+	tjit.common.prg_buf = image;
+	ret = __arch_prepare_bpf_trampoline(im, &tjit, m, flags,
+					    tlinks, func_addr);
 
-	return tjit.common.prg;
+	return ret < 0 ? ret : tjit.common.prg;
 }
 
 bool bpf_jit_supports_subprog_tailcalls(void)
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 676ac74026a8..52a44e353796 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -252,7 +252,7 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 /* combine single writes by using store-block insn */
 void __iowrite64_copy(void __iomem *to, const void *from, size_t count)
 {
-       zpci_memcpy_toio(to, from, count);
+	zpci_memcpy_toio(to, from, count * 8);
 }
 
 void __iomem *ioremap_prot(phys_addr_t phys_addr, size_t size,
diff --git a/arch/s390/pci/pci_mmio.c b/arch/s390/pci/pci_mmio.c
index 588089332931..a90499c087f0 100644
--- a/arch/s390/pci/pci_mmio.c
+++ b/arch/s390/pci/pci_mmio.c
@@ -97,9 +97,9 @@ static inline int __memcpy_toio_inuser(void __iomem *dst,
 		return -EINVAL;
 
 	while (n > 0) {
-		size = zpci_get_max_write_size((u64 __force) dst,
-					       (u64 __force) src, n,
-					       ZPCI_MAX_WRITE_SIZE);
+		size = zpci_get_max_io_size((u64 __force) dst,
+					    (u64 __force) src, n,
+					    ZPCI_MAX_WRITE_SIZE);
 		if (size > 8) /* main path */
 			rc = __pcistb_mio_inuser(dst, src, size, &status);
 		else
@@ -242,9 +242,9 @@ static inline int __memcpy_fromio_inuser(void __user *dst,
 	u8 status;
 
 	while (n > 0) {
-		size = zpci_get_max_write_size((u64 __force) src,
-					       (u64 __force) dst, n,
-					       ZPCI_MAX_READ_SIZE);
+		size = zpci_get_max_io_size((u64 __force) src,
+					    (u64 __force) dst, n,
+					    ZPCI_MAX_READ_SIZE);
 		rc = __pcilg_mio_inuser(dst, src, size, &status);
 		if (rc)
 			break;
diff --git a/arch/s390/tools/gen_facilities.c b/arch/s390/tools/gen_facilities.c
index cb0aff5c0187..68580cbea4e6 100644
--- a/arch/s390/tools/gen_facilities.c
+++ b/arch/s390/tools/gen_facilities.c
@@ -46,6 +46,7 @@ static struct facility_def facility_defs[] = {
 #endif
 #ifdef CONFIG_HAVE_MARCH_Z13_FEATURES
 			53, /* load-and-zero-rightmost-byte, etc. */
+			129, /* vector */
 #endif
 #ifdef CONFIG_HAVE_MARCH_Z14_FEATURES
 			58, /* miscellaneous-instruction-extension 2 */
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 0f279360838a..30d117f9ad7e 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -1220,7 +1220,7 @@ static int __init arch_setup(void)
 		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_dvi_modes);
 
 		/* No backlight */
-		gpio_backlight_data.fbdev = NULL;
+		gpio_backlight_data.dev = NULL;
 
 		gpio_set_value(GPIO_PTA2, 1);
 		gpio_set_value(GPIO_PTU1, 1);
diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig
index cf59b98446e4..7b427c17fbfe 100644
--- a/arch/sh/configs/sdk7786_defconfig
+++ b/arch/sh/configs/sdk7786_defconfig
@@ -171,7 +171,8 @@ CONFIG_BTRFS_FS=y
 CONFIG_AUTOFS_FS=m
 CONFIG_FUSE_FS=y
 CONFIG_CUSE=m
-CONFIG_FSCACHE=m
+CONFIG_NETFS_SUPPORT=m
+CONFIG_FSCACHE=y
 CONFIG_CACHEFILES=m
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index 871092753591..c1032559ecd4 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -138,7 +138,6 @@ CONFIG_NET_ACT_POLICE=m
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_FW_LOADER=m
 CONFIG_CONNECTOR=m
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 878b6b551bd2..51112f54552b 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -90,6 +90,7 @@ extern void copy_from_user_page(struct vm_area_struct *vma,
 	unsigned long len);
 
 #define flush_cache_vmap(start, end)		local_flush_cache_all(NULL)
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		local_flush_cache_all(NULL)
 
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index ac521f287fa5..cf5eab840d57 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -302,15 +302,6 @@ unsigned long long poke_real_address_q(unsigned long long addr,
 	ioremap_prot((addr), (size), pgprot_val(PAGE_KERNEL))
 #endif /* CONFIG_MMU */
 
-#define ioremap_uc	ioremap
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-#define unxlate_dev_mem_ptr(p, v) do { } while (0)
-
 #include <asm-generic/io.h>
 
 #define ARCH_HAS_VALID_PHYS_ADDR_RANGE
diff --git a/arch/sh/include/asm/traps_32.h b/arch/sh/include/asm/traps_32.h
index 8c5bbb7b6053..8f14071bea72 100644
--- a/arch/sh/include/asm/traps_32.h
+++ b/arch/sh/include/asm/traps_32.h
@@ -43,6 +43,9 @@ static inline void trigger_address_error(void)
 asmlinkage void do_address_error(struct pt_regs *regs,
 				 unsigned long writeaccess,
 				 unsigned long address);
+asmlinkage void do_page_fault(struct pt_regs *regs,
+			      unsigned long error_code,
+			      unsigned long address);
 asmlinkage void do_divide_error(unsigned long r4);
 asmlinkage void do_reserved_inst(void);
 asmlinkage void do_illegal_slot_inst(void);
diff --git a/arch/sh/kernel/syscalls/syscall.tbl b/arch/sh/kernel/syscalls/syscall.tbl
index 363fae0fe9bf..86fe269f0220 100644
--- a/arch/sh/kernel/syscalls/syscall.tbl
+++ b/arch/sh/kernel/syscalls/syscall.tbl
@@ -459,3 +459,8 @@
 454	common	futex_wake			sys_futex_wake
 455	common	futex_wait			sys_futex_wait
 456	common	futex_requeue			sys_futex_requeue
+457	common	statmount			sys_statmount
+458	common	listmount			sys_listmount
+459	common	lsm_get_self_attr		sys_lsm_get_self_attr
+460	common	lsm_set_self_attr		sys_lsm_set_self_attr
+461	common	lsm_list_modules		sys_lsm_list_modules
diff --git a/arch/sh/kernel/vsyscall/Makefile b/arch/sh/kernel/vsyscall/Makefile
index 6e8664448048..118744d349e2 100644
--- a/arch/sh/kernel/vsyscall/Makefile
+++ b/arch/sh/kernel/vsyscall/Makefile
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y += vsyscall.o vsyscall-syscall.o vsyscall-syms.o
 
-$(obj)/vsyscall-syscall.o: \
-	$(foreach F,trapa,$(obj)/vsyscall-$F.so)
+$(obj)/vsyscall-syscall.o: $(obj)/vsyscall-trapa.so
 
 # Teach kbuild about targets
-targets += $(foreach F,trapa,vsyscall-$F.o vsyscall-$F.so)
+targets += vsyscall-trapa.o vsyscall-traps.so
 targets += vsyscall-note.o vsyscall.lds vsyscall-dummy.o
 
 # The DSO images are built using a special linker script
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 511c17aede4a..455311d9a5e9 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -26,7 +26,7 @@ config ARCH_FORCE_MAX_ORDER
 	default "10"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE:_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 49849790e66d..204c43cb3d43 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -277,7 +277,7 @@ config ARCH_FORCE_MAX_ORDER
 	default "12"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index 5f6035936131..2a03daa68f28 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -60,7 +60,7 @@ libs-y                 += arch/sparc/prom/
 libs-y                 += arch/sparc/lib/
 
 drivers-$(CONFIG_PM) += arch/sparc/power/
-drivers-$(CONFIG_FB) += arch/sparc/video/
+drivers-$(CONFIG_FB_CORE) += arch/sparc/video/
 
 boot := arch/sparc/boot
 
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 45e5c76d449e..339c42d35089 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -24,16 +24,16 @@ ifeq ($(CONFIG_SPARC64),y)
 
 $(obj)/zImage: $(obj)/image FORCE
 	$(call if_changed,gzip)
-	@echo '  kernel: $@ is ready'
+	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
 
 $(obj)/vmlinux.aout: vmlinux FORCE
 	$(call if_changed,elftoaout)
-	@echo '  kernel: $@ is ready'
+	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
 else
 
 $(obj)/zImage: $(obj)/image FORCE
 	$(call if_changed,strip)
-	@echo '  kernel: $@ is ready'
+	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
 
 # The following lines make a readable image for U-Boot.
 #  uImage   - Binary file read by U-boot
@@ -59,13 +59,13 @@ targets += uImage
 $(obj)/uImage: $(obj)/image.gz FORCE
 	$(call if_changed,uimage)
 	$(call if_changed,uimage.o)
-	@echo '  Image $@ is ready'
+	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
 
 endif
 
 $(obj)/image: vmlinux FORCE
 	$(call if_changed,strip)
-	@echo '  kernel: $@ is ready'
+	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
 
 $(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback System.map $(ROOT_IMG) FORCE
 	$(call if_changed,elftoaout)
diff --git a/arch/sparc/include/asm/cacheflush_32.h b/arch/sparc/include/asm/cacheflush_32.h
index f3b7270bf71b..9fee0ccfccb8 100644
--- a/arch/sparc/include/asm/cacheflush_32.h
+++ b/arch/sparc/include/asm/cacheflush_32.h
@@ -48,6 +48,7 @@ static inline void flush_dcache_page(struct page *page)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 
 #define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
 /* When a context switch happens we must flush all user windows so that
diff --git a/arch/sparc/include/asm/cacheflush_64.h b/arch/sparc/include/asm/cacheflush_64.h
index 0e879004efff..2b1261b77ecd 100644
--- a/arch/sparc/include/asm/cacheflush_64.h
+++ b/arch/sparc/include/asm/cacheflush_64.h
@@ -75,6 +75,7 @@ void flush_ptrace_access(struct vm_area_struct *, struct page *,
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 
 #define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		do { } while (0)
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/sparc/include/asm/io_64.h b/arch/sparc/include/asm/io_64.h
index 9303270b22f3..c9528e4719cd 100644
--- a/arch/sparc/include/asm/io_64.h
+++ b/arch/sparc/include/asm/io_64.h
@@ -423,7 +423,6 @@ static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
 	return (void __iomem *)offset;
 }
 
-#define ioremap_uc(X,Y)			ioremap((X),(Y))
 #define ioremap_wc(X,Y)			ioremap((X),(Y))
 #define ioremap_wt(X,Y)			ioremap((X),(Y))
 static inline void __iomem *ioremap_np(unsigned long offset, unsigned long size)
@@ -470,12 +469,6 @@ static inline int sbus_can_burst64(void)
 struct device;
 void sbus_set_sbus64(struct device *, int);
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
 #endif
 
 #endif /* !(__SPARC64_IO_H) */
diff --git a/arch/sparc/include/asm/jump_label.h b/arch/sparc/include/asm/jump_label.h
index 94eb529dcb77..2718cbea826a 100644
--- a/arch/sparc/include/asm/jump_label.h
+++ b/arch/sparc/include/asm/jump_label.h
@@ -10,7 +10,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 "nop\n\t"
 		 "nop\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
@@ -26,7 +26,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 "b %l[l_yes]\n\t"
 		 "nop\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index 5e41033bf4ca..a8c871b7d786 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -706,6 +706,7 @@ static inline unsigned long pmd_write(pmd_t pmd)
 #define pud_write(pud)	pte_write(__pte(pud_val(pud)))
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define pmd_dirty pmd_dirty
 static inline unsigned long pmd_dirty(pmd_t pmd)
 {
 	pte_t pte = __pte(pmd_val(pmd));
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 0984bb6f0f17..58ea4ef9b622 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -5,7 +5,6 @@
 #
 
 asflags-y := -ansi
-ccflags-y := -Werror
 
 # Undefine sparc when processing vmlinux.lds - it is used
 # And teach CPP we are doing $(BITS) builds (for this case)
diff --git a/arch/sparc/kernel/asm-offsets.c b/arch/sparc/kernel/asm-offsets.c
index 5784f2df489a..3d9b9855dce9 100644
--- a/arch/sparc/kernel/asm-offsets.c
+++ b/arch/sparc/kernel/asm-offsets.c
@@ -19,14 +19,14 @@
 #include <asm/hibernate.h>
 
 #ifdef CONFIG_SPARC32
-int sparc32_foo(void)
+static int __used sparc32_foo(void)
 {
 	DEFINE(AOFF_thread_fork_kpsr,
 			offsetof(struct thread_struct, fork_kpsr));
 	return 0;
 }
 #else
-int sparc64_foo(void)
+static int __used sparc64_foo(void)
 {
 #ifdef CONFIG_HIBERNATION
 	BLANK();
@@ -45,7 +45,7 @@ int sparc64_foo(void)
 }
 #endif
 
-int foo(void)
+static int __used foo(void)
 {
 	BLANK();
 	DEFINE(AOFF_task_thread, offsetof(struct task_struct, thread));
diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c
index 3c38ca40a22b..a84598568300 100644
--- a/arch/sparc/kernel/pci_sabre.c
+++ b/arch/sparc/kernel/pci_sabre.c
@@ -13,7 +13,10 @@
 #include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
 
 #include <asm/apb.h>
 #include <asm/iommu.h>
@@ -456,7 +459,6 @@ static void sabre_pbm_init(struct pci_pbm_info *pbm,
 static const struct of_device_id sabre_match[];
 static int sabre_probe(struct platform_device *op)
 {
-	const struct of_device_id *match;
 	const struct linux_prom64_registers *pr_regs;
 	struct device_node *dp = op->dev.of_node;
 	struct pci_pbm_info *pbm;
@@ -466,8 +468,7 @@ static int sabre_probe(struct platform_device *op)
 	const u32 *vdma;
 	u64 clear_irq;
 
-	match = of_match_device(sabre_match, &op->dev);
-	hummingbird_p = match && (match->data != NULL);
+	hummingbird_p = (uintptr_t)device_get_match_data(&op->dev);
 	if (!hummingbird_p) {
 		struct device_node *cpu_dp;
 
diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c
index 23b47f7fdb1d..5d8dd4949586 100644
--- a/arch/sparc/kernel/pci_schizo.c
+++ b/arch/sparc/kernel/pci_schizo.c
@@ -11,7 +11,10 @@
 #include <linux/slab.h>
 #include <linux/export.h>
 #include <linux/interrupt.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/numa.h>
 
 #include <asm/iommu.h>
@@ -1459,15 +1462,13 @@ out_err:
 	return err;
 }
 
-static const struct of_device_id schizo_match[];
 static int schizo_probe(struct platform_device *op)
 {
-	const struct of_device_id *match;
+	unsigned long chip_type = (unsigned long)device_get_match_data(&op->dev);
 
-	match = of_match_device(schizo_match, &op->dev);
-	if (!match)
+	if (!chip_type)
 		return -EINVAL;
-	return __schizo_init(op, (unsigned long)match->data);
+	return __schizo_init(op, chip_type);
 }
 
 /* The ordering of this table is very important.  Some Tomatillo
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index c80b0a21d709..083e5f05a7f0 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -194,7 +194,7 @@ static void *dma_4v_alloc_coherent(struct device *dev, size_t size,
 
 	size = IO_PAGE_ALIGN(size);
 	order = get_order(size);
-	if (unlikely(order > MAX_ORDER))
+	if (unlikely(order > MAX_PAGE_ORDER))
 		return NULL;
 
 	npages = size >> IO_PAGE_SHIFT;
diff --git a/arch/sparc/kernel/syscalls/syscall.tbl b/arch/sparc/kernel/syscalls/syscall.tbl
index 7bcaa3d5ea44..b23d59313589 100644
--- a/arch/sparc/kernel/syscalls/syscall.tbl
+++ b/arch/sparc/kernel/syscalls/syscall.tbl
@@ -502,3 +502,8 @@
 454	common	futex_wake			sys_futex_wake
 455	common	futex_wait			sys_futex_wait
 456	common	futex_requeue			sys_futex_requeue
+457	common	statmount			sys_statmount
+458	common	listmount			sys_listmount
+459	common	lsm_get_self_attr		sys_lsm_get_self_attr
+460	common	lsm_set_self_attr		sys_lsm_set_self_attr
+461	common	lsm_list_modules		sys_lsm_list_modules
diff --git a/arch/sparc/kernel/traps_32.c b/arch/sparc/kernel/traps_32.c
index 179aabfa712e..bb149f6cc34b 100644
--- a/arch/sparc/kernel/traps_32.c
+++ b/arch/sparc/kernel/traps_32.c
@@ -10,6 +10,7 @@
  * I hate traps on the sparc, grrr...
  */
 
+#include <linux/cpu.h>
 #include <linux/sched/mm.h>
 #include <linux/sched/debug.h>
 #include <linux/mm_types.h>
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index 08ffd17d5ec3..dd048023bff5 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -9,6 +9,7 @@
  * I like traps on v9, :))))
  */
 
+#include <linux/cpu.h>
 #include <linux/extable.h>
 #include <linux/sched/mm.h>
 #include <linux/sched/debug.h>
@@ -897,7 +898,7 @@ void __init cheetah_ecache_flush_init(void)
 
 	/* Now allocate error trap reporting scoreboard. */
 	sz = NR_CPUS * (2 * sizeof(struct cheetah_err_info));
-	for (order = 0; order <= MAX_ORDER; order++) {
+	for (order = 0; order < NR_PAGE_ORDERS; order++) {
 		if ((PAGE_SIZE << order) >= sz)
 			break;
 	}
diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile
index 063556fe2cb1..59669ebddd4e 100644
--- a/arch/sparc/lib/Makefile
+++ b/arch/sparc/lib/Makefile
@@ -3,7 +3,6 @@
 #
 
 asflags-y := -ansi -DST_DIV0=0x02
-ccflags-y := -Werror
 
 lib-$(CONFIG_SPARC32) += ashrdi3.o
 lib-$(CONFIG_SPARC32) += memcpy.o memset.o
diff --git a/arch/sparc/mm/Makefile b/arch/sparc/mm/Makefile
index 871354aa3c00..809d993f6d88 100644
--- a/arch/sparc/mm/Makefile
+++ b/arch/sparc/mm/Makefile
@@ -3,7 +3,6 @@
 #
 
 asflags-y := -ansi
-ccflags-y := -Werror
 
 obj-$(CONFIG_SPARC64)   += ultra.o tlb.o tsb.o
 obj-y                   += fault_$(BITS).o
diff --git a/arch/sparc/mm/tsb.c b/arch/sparc/mm/tsb.c
index 5e2931a18409..6acd8a4c1e2a 100644
--- a/arch/sparc/mm/tsb.c
+++ b/arch/sparc/mm/tsb.c
@@ -402,8 +402,8 @@ void tsb_grow(struct mm_struct *mm, unsigned long tsb_index, unsigned long rss)
 	unsigned long new_rss_limit;
 	gfp_t gfp_flags;
 
-	if (max_tsb_size > PAGE_SIZE << MAX_ORDER)
-		max_tsb_size = PAGE_SIZE << MAX_ORDER;
+	if (max_tsb_size > PAGE_SIZE << MAX_PAGE_ORDER)
+		max_tsb_size = PAGE_SIZE << MAX_PAGE_ORDER;
 
 	new_cache_index = 0;
 	for (new_size = 8192; new_size < max_tsb_size; new_size <<= 1UL) {
diff --git a/arch/sparc/prom/Makefile b/arch/sparc/prom/Makefile
index 397b79af77f7..a1adc75d8055 100644
--- a/arch/sparc/prom/Makefile
+++ b/arch/sparc/prom/Makefile
@@ -3,7 +3,6 @@
 # Linux.
 #
 asflags := -ansi
-ccflags := -Werror
 
 lib-y                 := bootstr_$(BITS).o
 lib-y                 += init_$(BITS).o
diff --git a/arch/sparc/vdso/Makefile b/arch/sparc/vdso/Makefile
index d08c3a0443f3..7f5eedf1f5e0 100644
--- a/arch/sparc/vdso/Makefile
+++ b/arch/sparc/vdso/Makefile
@@ -3,9 +3,6 @@
 # Building vDSO images for sparc.
 #
 
-VDSO64-$(CONFIG_SPARC64)	:= y
-VDSOCOMPAT-$(CONFIG_COMPAT)	:= y
-
 # files to link into the vdso
 vobjs-y := vdso-note.o vclock_gettime.o
 
@@ -13,22 +10,15 @@ vobjs-y := vdso-note.o vclock_gettime.o
 obj-y				+= vma.o
 
 # vDSO images to build
-vdso_img-$(VDSO64-y)		+= 64
-vdso_img-$(VDSOCOMPAT-y)	+= 32
+obj-$(CONFIG_SPARC64)		+= vdso-image-64.o
+obj-$(CONFIG_COMPAT)		+= vdso-image-32.o
 
-vobjs := $(foreach F,$(vobjs-y),$(obj)/$F)
+vobjs := $(addprefix $(obj)/, $(vobjs-y))
 
 $(obj)/vdso.o: $(obj)/vdso.so
 
 targets += vdso.lds $(vobjs-y)
-
-# Build the vDSO image C files and link them in.
-vdso_img_objs := $(vdso_img-y:%=vdso-image-%.o)
-vdso_img_cfiles := $(vdso_img-y:%=vdso-image-%.c)
-vdso_img_sodbg := $(vdso_img-y:%=vdso%.so.dbg)
-obj-y += $(vdso_img_objs)
-targets += $(vdso_img_cfiles)
-targets += $(vdso_img_sodbg) $(vdso_img-y:%=vdso%.so)
+targets += $(foreach x, 32 64, vdso-image-$(x).c vdso$(x).so vdso$(x).so.dbg)
 
 CPPFLAGS_vdso.lds += -P -C
 
diff --git a/arch/sparc/video/Makefile b/arch/sparc/video/Makefile
index 6baddbd58e4d..d4d83f1702c6 100644
--- a/arch/sparc/video/Makefile
+++ b/arch/sparc/video/Makefile
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
-obj-$(CONFIG_FB) += fbdev.o
+obj-$(CONFIG_FB_CORE) += fbdev.o
diff --git a/arch/um/Makefile b/arch/um/Makefile
index 82f05f250634..34957dcb88b9 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -115,7 +115,9 @@ archprepare:
 	$(Q)$(MAKE) $(build)=$(HOST_DIR)/um include/generated/user_constants.h
 
 LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static
-LINK-$(CONFIG_LD_SCRIPT_DYN) += $(call cc-option, -no-pie)
+ifdef CONFIG_LD_SCRIPT_DYN
+LINK-$(call gcc-min-version, 60100)$(CONFIG_CC_IS_CLANG) += -no-pie
+endif
 LINK-$(CONFIG_LD_SCRIPT_DYN_RPATH) += -Wl,-rpath,/lib
 
 CFLAGS_NO_HARDENING := $(call cc-option, -fno-PIC,) $(call cc-option, -fno-pic,) \
diff --git a/arch/um/Makefile-skas b/arch/um/Makefile-skas
index ac35de5316a6..67323b028999 100644
--- a/arch/um/Makefile-skas
+++ b/arch/um/Makefile-skas
@@ -4,7 +4,12 @@
 #
 
 GPROF_OPT += -pg
+
+ifdef CONFIG_CC_IS_CLANG
+GCOV_OPT += -fprofile-instr-generate -fcoverage-mapping
+else
 GCOV_OPT += -fprofile-arcs -ftest-coverage
+endif
 
 CFLAGS-$(CONFIG_GCOV) += $(GCOV_OPT)
 CFLAGS-$(CONFIG_GPROF) += $(GPROF_OPT)
diff --git a/arch/um/drivers/chan.h b/arch/um/drivers/chan.h
index 3fec3b8406e9..e14b9cdf7a33 100644
--- a/arch/um/drivers/chan.h
+++ b/arch/um/drivers/chan.h
@@ -30,7 +30,7 @@ struct chan {
 extern void chan_interrupt(struct line *line, int irq);
 extern int parse_chan_pair(char *str, struct line *line, int device,
 			   const struct chan_opts *opts, char **error_out);
-extern int write_chan(struct chan *chan, const char *buf, int len,
+extern int write_chan(struct chan *chan, const u8 *buf, size_t len,
 			     int write_irq);
 extern int console_write_chan(struct chan *chan, const char *buf, 
 			      int len);
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index 26a702a06515..37538b4168da 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -33,14 +33,14 @@ static void not_configged_close(int fd, void *data)
 	       "UML\n");
 }
 
-static int not_configged_read(int fd, char *c_out, void *data)
+static int not_configged_read(int fd, u8 *c_out, void *data)
 {
 	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return -EIO;
 }
 
-static int not_configged_write(int fd, const char *buf, int len, void *data)
+static int not_configged_write(int fd, const u8 *buf, size_t len, void *data)
 {
 	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
@@ -247,8 +247,7 @@ void deactivate_chan(struct chan *chan, int irq)
 		deactivate_fd(chan->fd, irq);
 }
 
-int write_chan(struct chan *chan, const char *buf, int len,
-	       int write_irq)
+int write_chan(struct chan *chan, const u8 *buf, size_t len, int write_irq)
 {
 	int n, ret = 0;
 
@@ -540,7 +539,7 @@ void chan_interrupt(struct line *line, int irq)
 	struct tty_port *port = &line->port;
 	struct chan *chan = line->chan_in;
 	int err;
-	char c;
+	u8 c;
 
 	if (!chan || !chan->ops->read)
 		goto out;
diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c
index 25727ed648b7..ec04e47b9d79 100644
--- a/arch/um/drivers/chan_user.c
+++ b/arch/um/drivers/chan_user.c
@@ -19,7 +19,7 @@ void generic_close(int fd, void *unused)
 	close(fd);
 }
 
-int generic_read(int fd, char *c_out, void *unused)
+int generic_read(int fd, __u8 *c_out, void *unused)
 {
 	int n;
 
@@ -35,7 +35,7 @@ int generic_read(int fd, char *c_out, void *unused)
 
 /* XXX Trivial wrapper around write */
 
-int generic_write(int fd, const char *buf, int n, void *unused)
+int generic_write(int fd, const __u8 *buf, size_t n, void *unused)
 {
 	int err;
 
@@ -141,7 +141,7 @@ struct winch_data {
 	int pipe_fd;
 };
 
-static int winch_thread(void *arg)
+static __noreturn int winch_thread(void *arg)
 {
 	struct winch_data *data = arg;
 	sigset_t sigs;
@@ -153,8 +153,8 @@ static int winch_thread(void *arg)
 	pipe_fd = data->pipe_fd;
 	count = write(pipe_fd, &c, sizeof(c));
 	if (count != sizeof(c))
-		printk(UM_KERN_ERR "winch_thread : failed to write "
-		       "synchronization byte, err = %d\n", -count);
+		os_info("winch_thread : failed to write synchronization byte, err = %d\n",
+			-count);
 
 	/*
 	 * We are not using SIG_IGN on purpose, so don't fix it as I thought to
@@ -166,29 +166,29 @@ static int winch_thread(void *arg)
 	sigfillset(&sigs);
 	/* Block all signals possible. */
 	if (sigprocmask(SIG_SETMASK, &sigs, NULL) < 0) {
-		printk(UM_KERN_ERR "winch_thread : sigprocmask failed, "
-		       "errno = %d\n", errno);
-		exit(1);
+		os_info("winch_thread : sigprocmask failed, errno = %d\n",
+			errno);
+		goto wait_kill;
 	}
 	/* In sigsuspend(), block anything else than SIGWINCH. */
 	sigdelset(&sigs, SIGWINCH);
 
 	if (setsid() < 0) {
-		printk(UM_KERN_ERR "winch_thread : setsid failed, errno = %d\n",
+		os_info("winch_thread : setsid failed, errno = %d\n",
 		       errno);
-		exit(1);
+		goto wait_kill;
 	}
 
 	if (ioctl(pty_fd, TIOCSCTTY, 0) < 0) {
-		printk(UM_KERN_ERR "winch_thread : TIOCSCTTY failed on "
-		       "fd %d err = %d\n", pty_fd, errno);
-		exit(1);
+		os_info("winch_thread : TIOCSCTTY failed on "
+			"fd %d err = %d\n", pty_fd, errno);
+		goto wait_kill;
 	}
 
 	if (tcsetpgrp(pty_fd, os_getpid()) < 0) {
-		printk(UM_KERN_ERR "winch_thread : tcsetpgrp failed on "
-		       "fd %d err = %d\n", pty_fd, errno);
-		exit(1);
+		os_info("winch_thread : tcsetpgrp failed on fd %d err = %d\n",
+			pty_fd, errno);
+		goto wait_kill;
 	}
 
 	/*
@@ -199,8 +199,8 @@ static int winch_thread(void *arg)
 	 */
 	count = read(pipe_fd, &c, sizeof(c));
 	if (count != sizeof(c))
-		printk(UM_KERN_ERR "winch_thread : failed to read "
-		       "synchronization byte, err = %d\n", errno);
+		os_info("winch_thread : failed to read synchronization byte, err = %d\n",
+			errno);
 
 	while(1) {
 		/*
@@ -211,9 +211,15 @@ static int winch_thread(void *arg)
 
 		count = write(pipe_fd, &c, sizeof(c));
 		if (count != sizeof(c))
-			printk(UM_KERN_ERR "winch_thread : write failed, "
-			       "err = %d\n", errno);
+			os_info("winch_thread : write failed, err = %d\n",
+				errno);
 	}
+
+wait_kill:
+	c = 2;
+	count = write(pipe_fd, &c, sizeof(c));
+	while (1)
+		pause();
 }
 
 static int winch_tramp(int fd, struct tty_port *port, int *fd_out,
diff --git a/arch/um/drivers/chan_user.h b/arch/um/drivers/chan_user.h
index 4e51b85e2a23..e158e16fb3cc 100644
--- a/arch/um/drivers/chan_user.h
+++ b/arch/um/drivers/chan_user.h
@@ -7,6 +7,7 @@
 #define __CHAN_USER_H__
 
 #include <init.h>
+#include <linux/types.h>
 
 struct chan_opts {
 	void (*const announce)(char *dev_name, int dev);
@@ -19,8 +20,8 @@ struct chan_ops {
 	void *(*init)(char *, int, const struct chan_opts *);
 	int (*open)(int, int, int, void *, char **);
 	void (*close)(int, void *);
-	int (*read)(int, char *, void *);
-	int (*write)(int, const char *, int, void *);
+	int (*read)(int, __u8 *, void *);
+	int (*write)(int, const __u8 *, size_t, void *);
 	int (*console_write)(int, const char *, int);
 	int (*window_size)(int, void *, unsigned short *, unsigned short *);
 	void (*free)(void *);
@@ -31,8 +32,8 @@ extern const struct chan_ops fd_ops, null_ops, port_ops, pts_ops, pty_ops,
 	tty_ops, xterm_ops;
 
 extern void generic_close(int fd, void *unused);
-extern int generic_read(int fd, char *c_out, void *unused);
-extern int generic_write(int fd, const char *buf, int n, void *unused);
+extern int generic_read(int fd, __u8 *c_out, void *unused);
+extern int generic_write(int fd, const __u8 *buf, size_t n, void *unused);
 extern int generic_console_write(int fd, const char *buf, int n);
 extern int generic_window_size(int fd, void *unused, unsigned short *rows_out,
 			       unsigned short *cols_out);
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index b98545f3edb5..ffc5cb92fa36 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -83,7 +83,7 @@ unsigned int line_chars_in_buffer(struct tty_struct *tty)
  *
  * Must be called while holding line->lock!
  */
-static int buffer_data(struct line *line, const char *buf, int len)
+static int buffer_data(struct line *line, const u8 *buf, size_t len)
 {
 	int end, room;
 
@@ -629,15 +629,18 @@ static irqreturn_t winch_interrupt(int irq, void *data)
 
 	if (fd != -1) {
 		err = generic_read(fd, &c, NULL);
-		if (err < 0) {
+		/* A read of 2 means the winch thread failed and has warned */
+		if (err < 0 || (err == 1 && c == 2)) {
 			if (err != -EAGAIN) {
 				winch->fd = -1;
 				list_del(&winch->list);
 				os_close_file(fd);
-				printk(KERN_ERR "winch_interrupt : "
-				       "read failed, errno = %d\n", -err);
-				printk(KERN_ERR "fd %d is losing SIGWINCH "
-				       "support\n", winch->tty_fd);
+				if (err < 0) {
+					printk(KERN_ERR "winch_interrupt : read failed, errno = %d\n",
+					       -err);
+					printk(KERN_ERR "fd %d is losing SIGWINCH support\n",
+					       winch->tty_fd);
+				}
 				INIT_WORK(&winch->work, __free_winch);
 				schedule_work(&winch->work);
 				return IRQ_HANDLED;
diff --git a/arch/um/drivers/line.h b/arch/um/drivers/line.h
index e84fb9b4165e..e8bd6f3dfb50 100644
--- a/arch/um/drivers/line.h
+++ b/arch/um/drivers/line.h
@@ -47,9 +47,9 @@ struct line {
 	 *
 	 * buffer points to a buffer allocated on demand, of length
 	 * LINE_BUFSIZE, head to the start of the ring, tail to the end.*/
-	char *buffer;
-	char *head;
-	char *tail;
+	u8 *buffer;
+	u8 *head;
+	u8 *tail;
 
 	int sigio;
 	struct delayed_work task;
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 3d7836c46507..cabcc501b448 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -204,7 +204,7 @@ static int uml_net_close(struct net_device *dev)
 	return 0;
 }
 
-static int uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct uml_net_private *lp = netdev_priv(dev);
 	unsigned long flags;
diff --git a/arch/um/drivers/null.c b/arch/um/drivers/null.c
index 87087763a417..30d59b8481b4 100644
--- a/arch/um/drivers/null.c
+++ b/arch/um/drivers/null.c
@@ -28,7 +28,7 @@ static int null_open(int input, int output, int primary, void *d,
 	return (fd < 0) ? -errno : fd;
 }
 
-static int null_read(int fd, char *c_out, void *unused)
+static int null_read(int fd, __u8 *c_out, void *unused)
 {
 	return -ENODEV;
 }
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 50206feac577..92ee2697ff39 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -798,7 +798,6 @@ static int ubd_open_dev(struct ubd *ubd_dev)
 		ubd_dev->cow.fd = err;
 	}
 	if (ubd_dev->no_trim == 0) {
-		ubd_dev->queue->limits.discard_granularity = SECTOR_SIZE;
 		blk_queue_max_discard_sectors(ubd_dev->queue, UBD_MAX_REQUEST);
 		blk_queue_max_write_zeroes_sectors(ubd_dev->queue, UBD_MAX_REQUEST);
 	}
diff --git a/arch/um/drivers/virt-pci.c b/arch/um/drivers/virt-pci.c
index ffe2ee8a0246..97a37c062997 100644
--- a/arch/um/drivers/virt-pci.c
+++ b/arch/um/drivers/virt-pci.c
@@ -971,7 +971,7 @@ static long um_pci_map_platform(unsigned long offset, size_t size,
 	*ops = &um_pci_device_bar_ops;
 	*priv = &um_pci_platform_device->resptr[0];
 
-	return 0;
+	return offset;
 }
 
 static const struct logic_iomem_region_ops um_pci_platform_ops = {
diff --git a/arch/um/include/asm/cpufeature.h b/arch/um/include/asm/cpufeature.h
index 4b6d1b526bc1..66fe06db872f 100644
--- a/arch/um/include/asm/cpufeature.h
+++ b/arch/um/include/asm/cpufeature.h
@@ -75,7 +75,7 @@ extern void setup_clear_cpu_cap(unsigned int bit);
  */
 static __always_inline bool _static_cpu_has(u16 bit)
 {
-	asm_volatile_goto("1: jmp 6f\n"
+	asm goto("1: jmp 6f\n"
 		 "2:\n"
 		 ".skip -(((5f-4f) - (2b-1b)) > 0) * "
 			 "((5f-4f) - (2b-1b)),0x90\n"
diff --git a/arch/um/include/asm/mmu.h b/arch/um/include/asm/mmu.h
index 5b072aba5b65..a7555e43ed14 100644
--- a/arch/um/include/asm/mmu.h
+++ b/arch/um/include/asm/mmu.h
@@ -12,7 +12,6 @@
 typedef struct mm_context {
 	struct mm_id id;
 	struct uml_arch_mm_context arch;
-	struct page *stub_pages[2];
 } mm_context_t;
 
 extern void __switch_mm(struct mm_id * mm_idp);
diff --git a/arch/um/include/asm/processor-generic.h b/arch/um/include/asm/processor-generic.h
index 7414154b8e9a..6c3779541845 100644
--- a/arch/um/include/asm/processor-generic.h
+++ b/arch/um/include/asm/processor-generic.h
@@ -22,7 +22,6 @@ struct mm_struct;
 struct thread_struct {
 	struct pt_regs regs;
 	struct pt_regs *segv_regs;
-	int singlestep_syscall;
 	void *fault_addr;
 	jmp_buf *fault_catcher;
 	struct task_struct *prev_sched;
diff --git a/arch/um/include/shared/kern_util.h b/arch/um/include/shared/kern_util.h
index d8b8b4f07e42..789b83013f35 100644
--- a/arch/um/include/shared/kern_util.h
+++ b/arch/um/include/shared/kern_util.h
@@ -34,7 +34,6 @@ extern int handle_page_fault(unsigned long address, unsigned long ip,
 
 extern unsigned int do_IRQ(int irq, struct uml_pt_regs *regs);
 extern void initial_thread_cb(void (*proc)(void *), void *arg);
-extern int is_syscall(unsigned long addr);
 
 extern void timer_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs);
 
@@ -50,7 +49,7 @@ extern void do_uml_exitcalls(void);
  * Are we disallowed to sleep? Used to choose between GFP_KERNEL and
  * GFP_ATOMIC.
  */
-extern int __cant_sleep(void);
+extern int __uml_cant_sleep(void);
 extern int get_current_pid(void);
 extern int copy_from_user_proc(void *to, void *from, int size);
 extern char *uml_strdup(const char *string);
@@ -58,7 +57,7 @@ extern char *uml_strdup(const char *string);
 extern unsigned long to_irq_stack(unsigned long *mask_out);
 extern unsigned long from_irq_stack(int nested);
 
-extern int singlestepping(void *t);
+extern int singlestepping(void);
 
 extern void segv_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs);
 extern void bus_handler(int sig, struct siginfo *si, struct uml_pt_regs *regs);
diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h
index 0df646c6651e..aff8906304ea 100644
--- a/arch/um/include/shared/os.h
+++ b/arch/um/include/shared/os.h
@@ -323,9 +323,6 @@ extern void sigio_broken(int fd);
 extern int __add_sigio_fd(int fd);
 extern int __ignore_sigio_fd(int fd);
 
-/* prctl.c */
-extern int os_arch_prctl(int pid, int option, unsigned long *arg2);
-
 /* tty.c */
 extern int get_pty(void);
 
diff --git a/arch/um/include/shared/ptrace_user.h b/arch/um/include/shared/ptrace_user.h
index 95455e8996e7..8a705d8f96ce 100644
--- a/arch/um/include/shared/ptrace_user.h
+++ b/arch/um/include/shared/ptrace_user.h
@@ -12,45 +12,4 @@
 extern int ptrace_getregs(long pid, unsigned long *regs_out);
 extern int ptrace_setregs(long pid, unsigned long *regs_in);
 
-/* syscall emulation path in ptrace */
-
-#ifndef PTRACE_SYSEMU
-#define PTRACE_SYSEMU 31
-#endif
-#ifndef PTRACE_SYSEMU_SINGLESTEP
-#define PTRACE_SYSEMU_SINGLESTEP 32
-#endif
-
-/* On architectures, that started to support PTRACE_O_TRACESYSGOOD
- * in linux 2.4, there are two different definitions of
- * PTRACE_SETOPTIONS: linux 2.4 uses 21 while linux 2.6 uses 0x4200.
- * For binary compatibility, 2.6 also supports the old "21", named
- * PTRACE_OLDSETOPTION. On these architectures, UML always must use
- * "21", to ensure the kernel runs on 2.4 and 2.6 host without
- * recompilation. So, we use PTRACE_OLDSETOPTIONS in UML.
- * We also want to be able to build the kernel on 2.4, which doesn't
- * have PTRACE_OLDSETOPTIONS. So, if it is missing, we declare
- * PTRACE_OLDSETOPTIONS to be the same as PTRACE_SETOPTIONS.
- *
- * On architectures, that start to support PTRACE_O_TRACESYSGOOD on
- * linux 2.6, PTRACE_OLDSETOPTIONS never is defined, and also isn't
- * supported by the host kernel. In that case, our trick lets us use
- * the new 0x4200 with the name PTRACE_OLDSETOPTIONS.
- */
-#ifndef PTRACE_OLDSETOPTIONS
-#define PTRACE_OLDSETOPTIONS PTRACE_SETOPTIONS
-#endif
-
-void set_using_sysemu(int value);
-int get_using_sysemu(void);
-extern int sysemu_supported;
-
-#define SELECT_PTRACE_OPERATION(sysemu_mode, singlestep_mode) \
-	(((int[3][3] ) { \
-		{ PTRACE_SYSCALL, PTRACE_SYSCALL, PTRACE_SINGLESTEP }, \
-		{ PTRACE_SYSEMU, PTRACE_SYSEMU, PTRACE_SINGLESTEP }, \
-		{ PTRACE_SYSEMU, PTRACE_SYSEMU_SINGLESTEP, \
-		  PTRACE_SYSEMU_SINGLESTEP } }) \
-		[sysemu_mode][singlestep_mode])
-
 #endif
diff --git a/arch/um/include/shared/registers.h b/arch/um/include/shared/registers.h
index 2f9c3ce5b45e..a0450326521c 100644
--- a/arch/um/include/shared/registers.h
+++ b/arch/um/include/shared/registers.h
@@ -14,8 +14,6 @@ extern int save_fp_registers(int pid, unsigned long *fp_regs);
 extern int restore_fp_registers(int pid, unsigned long *fp_regs);
 extern int save_fpx_registers(int pid, unsigned long *fp_regs);
 extern int restore_fpx_registers(int pid, unsigned long *fp_regs);
-extern int save_registers(int pid, struct uml_pt_regs *regs);
-extern int restore_pid_registers(int pid, struct uml_pt_regs *regs);
 extern int init_pid_registers(int pid);
 extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs);
 extern int get_fp_registers(int pid, unsigned long *regs);
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 106b7da2f8d6..ab95648e93e1 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -220,7 +220,7 @@ void arch_cpu_idle(void)
 	um_idle_sleep();
 }
 
-int __cant_sleep(void) {
+int __uml_cant_sleep(void) {
 	return in_atomic() || irqs_disabled() || in_interrupt();
 	/* Is in_interrupt() really needed? */
 }
@@ -332,17 +332,9 @@ int __init make_proc_sysemu(void)
 
 late_initcall(make_proc_sysemu);
 
-int singlestepping(void * t)
+int singlestepping(void)
 {
-	struct task_struct *task = t ? t : current;
-
-	if (!test_thread_flag(TIF_SINGLESTEP))
-		return 0;
-
-	if (task->thread.singlestep_syscall)
-		return 1;
-
-	return 2;
+	return test_thread_flag(TIF_SINGLESTEP);
 }
 
 /*
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 5154b27de580..6600a2782796 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -12,7 +12,6 @@
 void user_enable_single_step(struct task_struct *child)
 {
 	set_tsk_thread_flag(child, TIF_SINGLESTEP);
-	child->thread.singlestep_syscall = 0;
 
 #ifdef SUBARCH_SET_SINGLESTEPPING
 	SUBARCH_SET_SINGLESTEPPING(child, 1);
@@ -22,7 +21,6 @@ void user_enable_single_step(struct task_struct *child)
 void user_disable_single_step(struct task_struct *child)
 {
 	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-	child->thread.singlestep_syscall = 0;
 
 #ifdef SUBARCH_SET_SINGLESTEPPING
 	SUBARCH_SET_SINGLESTEPPING(child, 0);
diff --git a/arch/um/kernel/signal.c b/arch/um/kernel/signal.c
index ae4658f576ab..a56b44522766 100644
--- a/arch/um/kernel/signal.c
+++ b/arch/um/kernel/signal.c
@@ -121,18 +121,6 @@ void do_signal(struct pt_regs *regs)
 	}
 
 	/*
-	 * This closes a way to execute a system call on the host.  If
-	 * you set a breakpoint on a system call instruction and singlestep
-	 * from it, the tracing thread used to PTRACE_SINGLESTEP the process
-	 * rather than PTRACE_SYSCALL it, allowing the system call to execute
-	 * on the host.  The tracing thread will check this flag and
-	 * PTRACE_SYSCALL if necessary.
-	 */
-	if (test_thread_flag(TIF_SINGLESTEP))
-		current->thread.singlestep_syscall =
-			is_syscall(PT_REGS_IP(&current->thread.regs));
-
-	/*
 	 * if there's no signal to deliver, we just put the saved sigmask
 	 * back
 	 */
diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c
index aaee96f07172..198269e384c4 100644
--- a/arch/um/kernel/skas/uaccess.c
+++ b/arch/um/kernel/skas/uaccess.c
@@ -236,7 +236,9 @@ EXPORT_SYMBOL(strnlen_user);
  *			  argument and comparison of the previous
  *			  futex value with another constant.
  *
- * @encoded_op:	encoded operation to execute
+ * @op:		operation to execute
+ * @oparg:	argument to operation
+ * @oval:	old value at uaddr
  * @uaddr:	pointer to user space address
  *
  * Return:
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index fddd1dec27e6..3e270da6b6f6 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -432,9 +432,29 @@ static void time_travel_update_time(unsigned long long next, bool idle)
 	time_travel_del_event(&ne);
 }
 
+static void time_travel_update_time_rel(unsigned long long offs)
+{
+	unsigned long flags;
+
+	/*
+	 * Disable interrupts before calculating the new time so
+	 * that a real timer interrupt (signal) can't happen at
+	 * a bad time e.g. after we read time_travel_time but
+	 * before we've completed updating the time.
+	 */
+	local_irq_save(flags);
+	time_travel_update_time(time_travel_time + offs, false);
+	local_irq_restore(flags);
+}
+
 void time_travel_ndelay(unsigned long nsec)
 {
-	time_travel_update_time(time_travel_time + nsec, false);
+	/*
+	 * Not strictly needed to use _rel() version since this is
+	 * only used in INFCPU/EXT modes, but it doesn't hurt and
+	 * is more readable too.
+	 */
+	time_travel_update_time_rel(nsec);
 }
 EXPORT_SYMBOL(time_travel_ndelay);
 
@@ -568,7 +588,11 @@ static void time_travel_set_start(void)
 #define time_travel_time 0
 #define time_travel_ext_waiting 0
 
-static inline void time_travel_update_time(unsigned long long ns, bool retearly)
+static inline void time_travel_update_time(unsigned long long ns, bool idle)
+{
+}
+
+static inline void time_travel_update_time_rel(unsigned long long offs)
 {
 }
 
@@ -720,9 +744,7 @@ static u64 timer_read(struct clocksource *cs)
 		 */
 		if (!irqs_disabled() && !in_interrupt() && !in_softirq() &&
 		    !time_travel_ext_waiting)
-			time_travel_update_time(time_travel_time +
-						TIMER_MULTIPLIER,
-						false);
+			time_travel_update_time_rel(TIMER_MULTIPLIER);
 		return time_travel_time / TIMER_MULTIPLIER;
 	}
 
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index b1bfed0c8528..7a9820797eae 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -373,10 +373,10 @@ int __init linux_main(int argc, char **argv)
 	max_physmem = TASK_SIZE - uml_physmem - iomem_size - MIN_VMALLOC;
 
 	/*
-	 * Zones have to begin on a 1 << MAX_ORDER page boundary,
+	 * Zones have to begin on a 1 << MAX_PAGE_ORDER page boundary,
 	 * so this makes sure that's true for highmem
 	 */
-	max_physmem &= ~((1 << (PAGE_SHIFT + MAX_ORDER)) - 1);
+	max_physmem &= ~((1 << (PAGE_SHIFT + MAX_PAGE_ORDER)) - 1);
 	if (physmem_size + iomem_size > max_physmem) {
 		highmem = physmem_size + iomem_size - max_physmem;
 		physmem_size -= highmem;
diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c
index b459745f52e2..3cb8ac63be6e 100644
--- a/arch/um/os-Linux/helper.c
+++ b/arch/um/os-Linux/helper.c
@@ -46,7 +46,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv)
 	unsigned long stack, sp;
 	int pid, fds[2], ret, n;
 
-	stack = alloc_stack(0, __cant_sleep());
+	stack = alloc_stack(0, __uml_cant_sleep());
 	if (stack == 0)
 		return -ENOMEM;
 
@@ -70,7 +70,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv)
 	data.pre_data = pre_data;
 	data.argv = argv;
 	data.fd = fds[1];
-	data.buf = __cant_sleep() ? uml_kmalloc(PATH_MAX, UM_GFP_ATOMIC) :
+	data.buf = __uml_cant_sleep() ? uml_kmalloc(PATH_MAX, UM_GFP_ATOMIC) :
 					uml_kmalloc(PATH_MAX, UM_GFP_KERNEL);
 	pid = clone(helper_child, (void *) sp, CLONE_VM, &data);
 	if (pid < 0) {
@@ -121,7 +121,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags,
 	unsigned long stack, sp;
 	int pid, status, err;
 
-	stack = alloc_stack(0, __cant_sleep());
+	stack = alloc_stack(0, __uml_cant_sleep());
 	if (stack == 0)
 		return -ENOMEM;
 
diff --git a/arch/um/os-Linux/registers.c b/arch/um/os-Linux/registers.c
index b123955be7ac..bd80b921add0 100644
--- a/arch/um/os-Linux/registers.c
+++ b/arch/um/os-Linux/registers.c
@@ -11,26 +11,6 @@
 #include <sysdep/ptrace_user.h>
 #include <registers.h>
 
-int save_registers(int pid, struct uml_pt_regs *regs)
-{
-	int err;
-
-	err = ptrace(PTRACE_GETREGS, pid, 0, regs->gp);
-	if (err < 0)
-		return -errno;
-	return 0;
-}
-
-int restore_pid_registers(int pid, struct uml_pt_regs *regs)
-{
-	int err;
-
-	err = ptrace(PTRACE_SETREGS, pid, 0, regs->gp);
-	if (err < 0)
-		return -errno;
-	return 0;
-}
-
 /* This is set once at boot time and not changed thereafter */
 
 static unsigned long exec_regs[MAX_REG_NR];
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 9464833e741a..1f5c3f2523d1 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -177,48 +177,11 @@ static void handle_segv(int pid, struct uml_pt_regs *regs, unsigned long *aux_fp
 	segv(regs->faultinfo, 0, 1, NULL);
 }
 
-/*
- * To use the same value of using_sysemu as the caller, ask it that value
- * (in local_using_sysemu
- */
-static void handle_trap(int pid, struct uml_pt_regs *regs,
-			int local_using_sysemu)
+static void handle_trap(int pid, struct uml_pt_regs *regs)
 {
-	int err, status;
-
 	if ((UPT_IP(regs) >= STUB_START) && (UPT_IP(regs) < STUB_END))
 		fatal_sigsegv();
 
-	if (!local_using_sysemu)
-	{
-		err = ptrace(PTRACE_POKEUSER, pid, PT_SYSCALL_NR_OFFSET,
-			     __NR_getpid);
-		if (err < 0) {
-			printk(UM_KERN_ERR "%s - nullifying syscall failed, errno = %d\n",
-			       __func__, errno);
-			fatal_sigsegv();
-		}
-
-		err = ptrace(PTRACE_SYSCALL, pid, 0, 0);
-		if (err < 0) {
-			printk(UM_KERN_ERR "%s - continuing to end of syscall failed, errno = %d\n",
-			       __func__, errno);
-			fatal_sigsegv();
-		}
-
-		CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED | __WALL));
-		if ((err < 0) || !WIFSTOPPED(status) ||
-		    (WSTOPSIG(status) != SIGTRAP + 0x80)) {
-			err = ptrace_dump_regs(pid);
-			if (err)
-				printk(UM_KERN_ERR "Failed to get registers from process, errno = %d\n",
-				       -err);
-			printk(UM_KERN_ERR "%s - failed to wait at end of syscall, errno = %d, status = %d\n",
-			       __func__, errno, status);
-			fatal_sigsegv();
-		}
-	}
-
 	handle_syscall(regs);
 }
 
@@ -226,7 +189,7 @@ extern char __syscall_stub_start[];
 
 /**
  * userspace_tramp() - userspace trampoline
- * @stack:	pointer to the new userspace stack page, can be NULL, if? FIXME:
+ * @stack:	pointer to the new userspace stack page
  *
  * The userspace trampoline is used to setup a new userspace process in start_userspace() after it was clone()'ed.
  * This function will run on a temporary stack page.
@@ -241,9 +204,13 @@ extern char __syscall_stub_start[];
  */
 static int userspace_tramp(void *stack)
 {
+	struct sigaction sa;
 	void *addr;
 	int fd;
 	unsigned long long offset;
+	unsigned long segv_handler = STUB_CODE +
+				     (unsigned long) stub_segv_handler -
+				     (unsigned long) __syscall_stub_start;
 
 	ptrace(PTRACE_TRACEME, 0, 0, 0);
 
@@ -254,39 +221,30 @@ static int userspace_tramp(void *stack)
 	addr = mmap64((void *) STUB_CODE, UM_KERN_PAGE_SIZE,
 		      PROT_EXEC, MAP_FIXED | MAP_PRIVATE, fd, offset);
 	if (addr == MAP_FAILED) {
-		printk(UM_KERN_ERR "mapping mmap stub at 0x%lx failed, errno = %d\n",
-		       STUB_CODE, errno);
+		os_info("mapping mmap stub at 0x%lx failed, errno = %d\n",
+			STUB_CODE, errno);
 		exit(1);
 	}
 
-	if (stack != NULL) {
-		fd = phys_mapping(uml_to_phys(stack), &offset);
-		addr = mmap((void *) STUB_DATA,
-			    STUB_DATA_PAGES * UM_KERN_PAGE_SIZE, PROT_READ | PROT_WRITE,
-			    MAP_FIXED | MAP_SHARED, fd, offset);
-		if (addr == MAP_FAILED) {
-			printk(UM_KERN_ERR "mapping segfault stack at 0x%lx failed, errno = %d\n",
-			       STUB_DATA, errno);
-			exit(1);
-		}
+	fd = phys_mapping(uml_to_phys(stack), &offset);
+	addr = mmap((void *) STUB_DATA,
+		    STUB_DATA_PAGES * UM_KERN_PAGE_SIZE, PROT_READ | PROT_WRITE,
+		    MAP_FIXED | MAP_SHARED, fd, offset);
+	if (addr == MAP_FAILED) {
+		os_info("mapping segfault stack at 0x%lx failed, errno = %d\n",
+			STUB_DATA, errno);
+		exit(1);
 	}
-	if (stack != NULL) {
-		struct sigaction sa;
-
-		unsigned long v = STUB_CODE +
-				  (unsigned long) stub_segv_handler -
-				  (unsigned long) __syscall_stub_start;
-
-		set_sigstack((void *) STUB_DATA, STUB_DATA_PAGES * UM_KERN_PAGE_SIZE);
-		sigemptyset(&sa.sa_mask);
-		sa.sa_flags = SA_ONSTACK | SA_NODEFER | SA_SIGINFO;
-		sa.sa_sigaction = (void *) v;
-		sa.sa_restorer = NULL;
-		if (sigaction(SIGSEGV, &sa, NULL) < 0) {
-			printk(UM_KERN_ERR "%s - setting SIGSEGV handler failed - errno = %d\n",
-			       __func__, errno);
-			exit(1);
-		}
+
+	set_sigstack((void *) STUB_DATA, STUB_DATA_PAGES * UM_KERN_PAGE_SIZE);
+	sigemptyset(&sa.sa_mask);
+	sa.sa_flags = SA_ONSTACK | SA_NODEFER | SA_SIGINFO;
+	sa.sa_sigaction = (void *) segv_handler;
+	sa.sa_restorer = NULL;
+	if (sigaction(SIGSEGV, &sa, NULL) < 0) {
+		os_info("%s - setting SIGSEGV handler failed - errno = %d\n",
+			__func__, errno);
+		exit(1);
 	}
 
 	kill(os_getpid(), SIGSTOP);
@@ -298,7 +256,7 @@ int kill_userspace_mm[NR_CPUS];
 
 /**
  * start_userspace() - prepare a new userspace process
- * @stub_stack:	pointer to the stub stack. Can be NULL, if? FIXME:
+ * @stub_stack:	pointer to the stub stack.
  *
  * Setups a new temporary stack page that is used while userspace_tramp() runs
  * Clones the kernel process into a new userspace process, with FDs only.
@@ -355,10 +313,10 @@ int start_userspace(unsigned long stub_stack)
 		goto out_kill;
 	}
 
-	if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL,
+	if (ptrace(PTRACE_SETOPTIONS, pid, NULL,
 		   (void *) PTRACE_O_TRACESYSGOOD) < 0) {
 		err = -errno;
-		printk(UM_KERN_ERR "%s : PTRACE_OLDSETOPTIONS failed, errno = %d\n",
+		printk(UM_KERN_ERR "%s : PTRACE_SETOPTIONS failed, errno = %d\n",
 		       __func__, errno);
 		goto out_kill;
 	}
@@ -380,8 +338,6 @@ int start_userspace(unsigned long stub_stack)
 void userspace(struct uml_pt_regs *regs, unsigned long *aux_fp_regs)
 {
 	int err, status, op, pid = userspace_pid[0];
-	/* To prevent races if using_sysemu changes under us.*/
-	int local_using_sysemu;
 	siginfo_t si;
 
 	/* Handle any immediate reschedules or signals */
@@ -411,11 +367,10 @@ void userspace(struct uml_pt_regs *regs, unsigned long *aux_fp_regs)
 			fatal_sigsegv();
 		}
 
-		/* Now we set local_using_sysemu to be used for one loop */
-		local_using_sysemu = get_using_sysemu();
-
-		op = SELECT_PTRACE_OPERATION(local_using_sysemu,
-					     singlestepping(NULL));
+		if (singlestepping())
+			op = PTRACE_SYSEMU_SINGLESTEP;
+		else
+			op = PTRACE_SYSEMU;
 
 		if (ptrace(op, pid, 0, 0)) {
 			printk(UM_KERN_ERR "%s - ptrace continue failed, op = %d, errno = %d\n",
@@ -474,7 +429,7 @@ void userspace(struct uml_pt_regs *regs, unsigned long *aux_fp_regs)
 				else handle_segv(pid, regs, aux_fp_regs);
 				break;
 			case SIGTRAP + 0x80:
-			        handle_trap(pid, regs, local_using_sysemu);
+				handle_trap(pid, regs);
 				break;
 			case SIGTRAP:
 				relay_signal(SIGTRAP, (struct siginfo *)&si, regs);
@@ -597,10 +552,10 @@ int copy_context_skas0(unsigned long new_stack, int pid)
 		goto out_kill;
 	}
 
-	if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL,
+	if (ptrace(PTRACE_SETOPTIONS, pid, NULL,
 		   (void *)PTRACE_O_TRACESYSGOOD) < 0) {
 		err = -errno;
-		printk(UM_KERN_ERR "%s : PTRACE_OLDSETOPTIONS failed, errno = %d\n",
+		printk(UM_KERN_ERR "%s : PTRACE_SETOPTIONS failed, errno = %d\n",
 		       __func__, errno);
 		goto out_kill;
 	}
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index e3ee4db58b40..8b0e98ab842c 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -112,102 +112,32 @@ static int start_ptraced_child(void)
 	return pid;
 }
 
-/* When testing for SYSEMU support, if it is one of the broken versions, we
- * must just avoid using sysemu, not panic, but only if SYSEMU features are
- * broken.
- * So only for SYSEMU features we test mustpanic, while normal host features
- * must work anyway!
- */
-static int stop_ptraced_child(int pid, int exitcode, int mustexit)
+static void stop_ptraced_child(int pid, int exitcode)
 {
-	int status, n, ret = 0;
+	int status, n;
+
+	if (ptrace(PTRACE_CONT, pid, 0, 0) < 0)
+		fatal_perror("stop_ptraced_child : ptrace failed");
 
-	if (ptrace(PTRACE_CONT, pid, 0, 0) < 0) {
-		perror("stop_ptraced_child : ptrace failed");
-		return -1;
-	}
 	CATCH_EINTR(n = waitpid(pid, &status, 0));
 	if (!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
 		int exit_with = WEXITSTATUS(status);
-		if (exit_with == 2)
-			non_fatal("check_ptrace : child exited with status 2. "
-				  "\nDisabling SYSEMU support.\n");
-		non_fatal("check_ptrace : child exited with exitcode %d, while "
-			  "expecting %d; status 0x%x\n", exit_with,
-			  exitcode, status);
-		if (mustexit)
-			exit(1);
-		ret = -1;
+		fatal("stop_ptraced_child : child exited with exitcode %d, "
+		      "while expecting %d; status 0x%x\n", exit_with,
+		      exitcode, status);
 	}
-
-	return ret;
-}
-
-/* Changed only during early boot */
-static int force_sysemu_disabled = 0;
-
-static int __init nosysemu_cmd_param(char *str, int* add)
-{
-	force_sysemu_disabled = 1;
-	return 0;
 }
 
-__uml_setup("nosysemu", nosysemu_cmd_param,
-"nosysemu\n"
-"    Turns off syscall emulation patch for ptrace (SYSEMU).\n"
-"    SYSEMU is a performance-patch introduced by Laurent Vivier. It changes\n"
-"    behaviour of ptrace() and helps reduce host context switch rates.\n"
-"    To make it work, you need a kernel patch for your host, too.\n"
-"    See http://perso.wanadoo.fr/laurent.vivier/UML/ for further \n"
-"    information.\n\n");
-
 static void __init check_sysemu(void)
 {
-	unsigned long regs[MAX_REG_NR];
 	int pid, n, status, count=0;
 
-	os_info("Checking syscall emulation patch for ptrace...");
-	sysemu_supported = 0;
-	pid = start_ptraced_child();
-
-	if (ptrace(PTRACE_SYSEMU, pid, 0, 0) < 0)
-		goto fail;
-
-	CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
-	if (n < 0)
-		fatal_perror("check_sysemu : wait failed");
-	if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGTRAP))
-		fatal("check_sysemu : expected SIGTRAP, got status = %d\n",
-		      status);
-
-	if (ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
-		fatal_perror("check_sysemu : PTRACE_GETREGS failed");
-	if (PT_SYSCALL_NR(regs) != __NR_getpid) {
-		non_fatal("check_sysemu got system call number %d, "
-			  "expected %d...", PT_SYSCALL_NR(regs), __NR_getpid);
-		goto fail;
-	}
-
-	n = ptrace(PTRACE_POKEUSER, pid, PT_SYSCALL_RET_OFFSET, os_getpid());
-	if (n < 0) {
-		non_fatal("check_sysemu : failed to modify system call "
-			  "return");
-		goto fail;
-	}
-
-	if (stop_ptraced_child(pid, 0, 0) < 0)
-		goto fail_stopped;
-
-	sysemu_supported = 1;
-	os_info("OK\n");
-	set_using_sysemu(!force_sysemu_disabled);
-
-	os_info("Checking advanced syscall emulation patch for ptrace...");
+	os_info("Checking syscall emulation for ptrace...");
 	pid = start_ptraced_child();
 
-	if ((ptrace(PTRACE_OLDSETOPTIONS, pid, 0,
+	if ((ptrace(PTRACE_SETOPTIONS, pid, 0,
 		   (void *) PTRACE_O_TRACESYSGOOD) < 0))
-		fatal_perror("check_sysemu: PTRACE_OLDSETOPTIONS failed");
+		fatal_perror("check_sysemu: PTRACE_SETOPTIONS failed");
 
 	while (1) {
 		count++;
@@ -240,20 +170,15 @@ static void __init check_sysemu(void)
 			goto fail;
 		}
 	}
-	if (stop_ptraced_child(pid, 0, 0) < 0)
-		goto fail_stopped;
+	stop_ptraced_child(pid, 0);
 
-	sysemu_supported = 2;
 	os_info("OK\n");
 
-	if (!force_sysemu_disabled)
-		set_using_sysemu(sysemu_supported);
 	return;
 
 fail:
-	stop_ptraced_child(pid, 1, 0);
-fail_stopped:
-	non_fatal("missing\n");
+	stop_ptraced_child(pid, 1);
+	fatal("missing\n");
 }
 
 static void __init check_ptrace(void)
@@ -263,9 +188,9 @@ static void __init check_ptrace(void)
 	os_info("Checking that ptrace can change system call numbers...");
 	pid = start_ptraced_child();
 
-	if ((ptrace(PTRACE_OLDSETOPTIONS, pid, 0,
+	if ((ptrace(PTRACE_SETOPTIONS, pid, 0,
 		   (void *) PTRACE_O_TRACESYSGOOD) < 0))
-		fatal_perror("check_ptrace: PTRACE_OLDSETOPTIONS failed");
+		fatal_perror("check_ptrace: PTRACE_SETOPTIONS failed");
 
 	while (1) {
 		if (ptrace(PTRACE_SYSCALL, pid, 0, 0) < 0)
@@ -291,7 +216,7 @@ static void __init check_ptrace(void)
 			break;
 		}
 	}
-	stop_ptraced_child(pid, 0, 1);
+	stop_ptraced_child(pid, 0);
 	os_info("OK\n");
 	check_sysemu();
 }
@@ -370,7 +295,7 @@ void __init os_early_checks(void)
 	pid = start_ptraced_child();
 	if (init_pid_registers(pid))
 		fatal("Failed to initialize default registers");
-	stop_ptraced_child(pid, 1, 1);
+	stop_ptraced_child(pid, 1);
 }
 
 int __init parse_iomem(char *str, int *add)
diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c
index fc0f2a9dee5a..1dca4ffbd572 100644
--- a/arch/um/os-Linux/util.c
+++ b/arch/um/os-Linux/util.c
@@ -173,23 +173,38 @@ __uml_setup("quiet", quiet_cmd_param,
 "quiet\n"
 "    Turns off information messages during boot.\n\n");
 
+/*
+ * The os_info/os_warn functions will be called by helper threads. These
+ * have a very limited stack size and using the libc formatting functions
+ * may overflow the stack.
+ * So pull in the kernel vscnprintf and use that instead with a fixed
+ * on-stack buffer.
+ */
+int vscnprintf(char *buf, size_t size, const char *fmt, va_list args);
+
 void os_info(const char *fmt, ...)
 {
+	char buf[256];
 	va_list list;
+	int len;
 
 	if (quiet_info)
 		return;
 
 	va_start(list, fmt);
-	vfprintf(stderr, fmt, list);
+	len = vscnprintf(buf, sizeof(buf), fmt, list);
+	fwrite(buf, len, 1, stderr);
 	va_end(list);
 }
 
 void os_warn(const char *fmt, ...)
 {
+	char buf[256];
 	va_list list;
+	int len;
 
 	va_start(list, fmt);
-	vfprintf(stderr, fmt, list);
+	len = vscnprintf(buf, sizeof(buf), fmt, list);
+	fwrite(buf, len, 1, stderr);
 	va_end(list);
 }
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1566748f16c4..5edec175b9bf 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -59,6 +59,7 @@ config X86
 	#
 	select ACPI_LEGACY_TABLES_LOOKUP	if ACPI
 	select ACPI_SYSTEM_POWER_STATES_SUPPORT	if ACPI
+	select ACPI_HOTPLUG_CPU			if ACPI_PROCESSOR && HOTPLUG_CPU
 	select ARCH_32BIT_OFF_T			if X86_32
 	select ARCH_CLOCKSOURCE_INIT
 	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
@@ -71,6 +72,7 @@ config X86
 	select ARCH_HAS_CACHE_LINE_SIZE
 	select ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION
 	select ARCH_HAS_CPU_FINALIZE_INIT
+	select ARCH_HAS_CPU_PASID		if IOMMU_SVA
 	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL
 	select ARCH_HAS_DEBUG_VM_PGTABLE	if !X86_PAE
@@ -88,6 +90,7 @@ config X86
 	select ARCH_HAS_PMEM_API		if X86_64
 	select ARCH_HAS_PTE_DEVMAP		if X86_64
 	select ARCH_HAS_PTE_SPECIAL
+	select ARCH_HAS_HW_PTE_YOUNG
 	select ARCH_HAS_NONLEAF_PMD_YOUNG	if PGTABLE_LEVELS > 2
 	select ARCH_HAS_UACCESS_FLUSHCACHE	if X86_64
 	select ARCH_HAS_COPY_MC			if X86_64
@@ -147,6 +150,7 @@ config X86
 	select GENERIC_CLOCKEVENTS_MIN_ADJUST
 	select GENERIC_CMOS_UPDATE
 	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_DEVICES
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_ENTRY
@@ -169,7 +173,7 @@ config X86
 	select HAS_IOPORT
 	select HAVE_ACPI_APEI			if ACPI
 	select HAVE_ACPI_APEI_NMI		if ACPI
-	select HAVE_ALIGNED_STRUCT_PAGE		if SLUB
+	select HAVE_ALIGNED_STRUCT_PAGE
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_HUGE_VMAP		if X86_64 || X86_PAE
 	select HAVE_ARCH_HUGE_VMALLOC		if X86_64
@@ -384,10 +388,6 @@ config HAVE_INTEL_TXT
 	def_bool y
 	depends on INTEL_IOMMU && ACPI
 
-config X86_32_SMP
-	def_bool y
-	depends on X86_32 && SMP
-
 config X86_64_SMP
 	def_bool y
 	depends on X86_64 && SMP
@@ -1415,7 +1415,7 @@ config HIGHMEM4G
 
 config HIGHMEM64G
 	bool "64GB"
-	depends on !M486SX && !M486 && !M586 && !M586TSC && !M586MMX && !MGEODE_LX && !MGEODEGX1 && !MCYRIXIII && !MELAN && !MWINCHIPC6 && !MWINCHIP3D && !MK6
+	depends on X86_HAVE_PAE
 	select X86_PAE
 	help
 	  Select this if you have a 32-bit processor and more than 4
@@ -1472,7 +1472,7 @@ config HIGHMEM
 
 config X86_PAE
 	bool "PAE (Physical Address Extension) Support"
-	depends on X86_32 && !HIGHMEM4G
+	depends on X86_32 && X86_HAVE_PAE
 	select PHYS_ADDR_T_64BIT
 	select SWIOTLB
 	help
@@ -1970,6 +1970,11 @@ config INTEL_TDX_HOST
 	depends on CPU_SUP_INTEL
 	depends on X86_64
 	depends on KVM_INTEL
+	depends on X86_X2APIC
+	select ARCH_KEEP_MEMBLOCK
+	depends on CONTIG_ALLOC
+	depends on !KEXEC_CORE
+	depends on X86_MCE
 	help
 	  Intel Trust Domain Extensions (TDX) protects guest VMs from malicious
 	  host and certain physical attacks.  This option enables necessary TDX
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 00468adf180f..2a7279d80460 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -362,9 +362,13 @@ config X86_TSC
 	def_bool y
 	depends on (MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) || X86_64
 
+config X86_HAVE_PAE
+	def_bool y
+	depends on MCRUSOE || MEFFICEON || MCYRIXIII || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC7 || MCORE2 || MATOM || X86_64
+
 config X86_CMPXCHG64
 	def_bool y
-	depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586TSC || M586MMX || MATOM || MGEODE_LX || MGEODEGX1 || MK6 || MK7 || MK8
+	depends on X86_HAVE_PAE || M586TSC || M586MMX || MK6 || MK7
 
 # this should be set for all -march=.. options where the compiler
 # generates cmov.
@@ -375,7 +379,7 @@ config X86_CMOV
 config X86_MINIMUM_CPU_FAMILY
 	int
 	default "64" if X86_64
-	default "6" if X86_32 && (MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MEFFICEON || MATOM || MCRUSOE || MCORE2 || MK7 || MK8)
+	default "6" if X86_32 && (MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MEFFICEON || MATOM || MCORE2 || MK7 || MK8)
 	default "5" if X86_32 && X86_CMPXCHG64
 	default "4"
 
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 1a068de12a56..da8f3caf2781 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -112,13 +112,13 @@ ifeq ($(CONFIG_X86_32),y)
         # temporary until string.h is fixed
         KBUILD_CFLAGS += -ffreestanding
 
-	ifeq ($(CONFIG_STACKPROTECTOR),y)
-		ifeq ($(CONFIG_SMP),y)
+    ifeq ($(CONFIG_STACKPROTECTOR),y)
+        ifeq ($(CONFIG_SMP),y)
 			KBUILD_CFLAGS += -mstack-protector-guard-reg=fs -mstack-protector-guard-symbol=__stack_chk_guard
-		else
+        else
 			KBUILD_CFLAGS += -mstack-protector-guard=global
-		endif
-	endif
+        endif
+    endif
 else
         BITS := 64
         UTS_MACHINE := x86_64
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 71fc531b95b4..f19c038409aa 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -53,7 +53,7 @@ KBUILD_CFLAGS += -D__DISABLE_EXPORTS
 KBUILD_CFLAGS += $(call cc-option,-Wa$(comma)-mrelax-relocations=no)
 KBUILD_CFLAGS += -include $(srctree)/include/linux/hidden.h
 
-# sev.c indirectly inludes inat-table.h which is generated during
+# sev.c indirectly includes inat-table.h which is generated during
 # compilation and stored in $(objtree). Add the directory to the includes so
 # that the compiler finds it even with out-of-tree builds (make O=/some/path).
 CFLAGS_sev.o += -I$(objtree)/arch/x86/lib/
diff --git a/arch/x86/boot/compressed/ident_map_64.c b/arch/x86/boot/compressed/ident_map_64.c
index 473ba59b82a8..d040080d7edb 100644
--- a/arch/x86/boot/compressed/ident_map_64.c
+++ b/arch/x86/boot/compressed/ident_map_64.c
@@ -386,3 +386,8 @@ void do_boot_page_fault(struct pt_regs *regs, unsigned long error_code)
 	 */
 	kernel_add_identity_map(address, end);
 }
+
+void do_boot_nmi_trap(struct pt_regs *regs, unsigned long error_code)
+{
+	/* Empty handler to ignore NMI during early boot */
+}
diff --git a/arch/x86/boot/compressed/idt_64.c b/arch/x86/boot/compressed/idt_64.c
index 3cdf94b41456..d100284bbef4 100644
--- a/arch/x86/boot/compressed/idt_64.c
+++ b/arch/x86/boot/compressed/idt_64.c
@@ -61,6 +61,7 @@ void load_stage2_idt(void)
 	boot_idt_desc.address = (unsigned long)boot_idt;
 
 	set_idt_entry(X86_TRAP_PF, boot_page_fault);
+	set_idt_entry(X86_TRAP_NMI, boot_nmi_trap);
 
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 	/*
diff --git a/arch/x86/boot/compressed/idt_handlers_64.S b/arch/x86/boot/compressed/idt_handlers_64.S
index 22890e199f5b..4d03c8562f63 100644
--- a/arch/x86/boot/compressed/idt_handlers_64.S
+++ b/arch/x86/boot/compressed/idt_handlers_64.S
@@ -70,6 +70,7 @@ SYM_FUNC_END(\name)
 	.code64
 
 EXCEPTION_HANDLER	boot_page_fault do_boot_page_fault error_code=1
+EXCEPTION_HANDLER	boot_nmi_trap do_boot_nmi_trap error_code=0
 
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 EXCEPTION_HANDLER	boot_stage1_vc do_vc_no_ghcb		error_code=1
diff --git a/arch/x86/boot/compressed/mem.c b/arch/x86/boot/compressed/mem.c
index b3c3a4be7471..dbba332e4a12 100644
--- a/arch/x86/boot/compressed/mem.c
+++ b/arch/x86/boot/compressed/mem.c
@@ -8,7 +8,7 @@
 
 /*
  * accept_memory() and process_unaccepted_memory() called from EFI stub which
- * runs before decompresser and its early_tdx_detect().
+ * runs before decompressor and its early_tdx_detect().
  *
  * Enumerate TDX directly from the early users.
  */
diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h
index c0d502bd8716..bc2f0f17fb90 100644
--- a/arch/x86/boot/compressed/misc.h
+++ b/arch/x86/boot/compressed/misc.h
@@ -196,6 +196,7 @@ static inline void cleanup_exception_handling(void) { }
 
 /* IDT Entry Points */
 void boot_page_fault(void);
+void boot_nmi_trap(void);
 void boot_stage1_vc(void);
 void boot_stage2_vc(void);
 
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index b2771710ed98..a1bbedd989e4 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -106,8 +106,7 @@ extra_header_fields:
 	.word	0				# MinorSubsystemVersion
 	.long	0				# Win32VersionValue
 
-	.long	setup_size + ZO__end + pecompat_vsize
-						# SizeOfImage
+	.long	setup_size + ZO__end		# SizeOfImage
 
 	.long	salign				# SizeOfHeaders
 	.long	0				# CheckSum
@@ -143,7 +142,7 @@ section_table:
 	.ascii	".setup"
 	.byte	0
 	.byte	0
-	.long	setup_size - salign 		# VirtualSize
+	.long	pecompat_fstart - salign 	# VirtualSize
 	.long	salign				# VirtualAddress
 	.long	pecompat_fstart - salign	# SizeOfRawData
 	.long	salign				# PointerToRawData
@@ -156,8 +155,8 @@ section_table:
 #ifdef CONFIG_EFI_MIXED
 	.asciz	".compat"
 
-	.long	8				# VirtualSize
-	.long	setup_size + ZO__end		# VirtualAddress
+	.long	pecompat_fsize			# VirtualSize
+	.long	pecompat_fstart			# VirtualAddress
 	.long	pecompat_fsize			# SizeOfRawData
 	.long	pecompat_fstart			# PointerToRawData
 
@@ -172,17 +171,16 @@ section_table:
 	 * modes this image supports.
 	 */
 	.pushsection ".pecompat", "a", @progbits
-	.balign	falign
-	.set	pecompat_vsize, salign
+	.balign	salign
 	.globl	pecompat_fstart
 pecompat_fstart:
 	.byte	0x1				# Version
 	.byte	8				# Size
 	.word	IMAGE_FILE_MACHINE_I386		# PE machine type
 	.long	setup_size + ZO_efi32_pe_entry	# Entrypoint
+	.byte	0x0				# Sentinel
 	.popsection
 #else
-	.set	pecompat_vsize, 0
 	.set	pecompat_fstart, setup_size
 #endif
 	.ascii	".text"
diff --git a/arch/x86/boot/pm.c b/arch/x86/boot/pm.c
index 40031a614712..5941f930f6c5 100644
--- a/arch/x86/boot/pm.c
+++ b/arch/x86/boot/pm.c
@@ -11,6 +11,7 @@
  */
 
 #include "boot.h"
+#include <asm/desc_defs.h>
 #include <asm/segment.h>
 
 /*
@@ -67,13 +68,13 @@ static void setup_gdt(void)
 	   being 8-byte unaligned.  Intel recommends 16 byte alignment. */
 	static const u64 boot_gdt[] __attribute__((aligned(16))) = {
 		/* CS: code, read/execute, 4 GB, base 0 */
-		[GDT_ENTRY_BOOT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff),
+		[GDT_ENTRY_BOOT_CS] = GDT_ENTRY(DESC_CODE32, 0, 0xfffff),
 		/* DS: data, read/write, 4 GB, base 0 */
-		[GDT_ENTRY_BOOT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff),
+		[GDT_ENTRY_BOOT_DS] = GDT_ENTRY(DESC_DATA32, 0, 0xfffff),
 		/* TSS: 32-bit tss, 104 bytes, base 4096 */
 		/* We only have a TSS here to keep Intel VT happy;
 		   we don't actually use it for anything. */
-		[GDT_ENTRY_BOOT_TSS] = GDT_ENTRY(0x0089, 4096, 103),
+		[GDT_ENTRY_BOOT_TSS] = GDT_ENTRY(DESC_TSS32, 4096, 103),
 	};
 	/* Xen HVM incorrectly stores a pointer to the gdt_ptr, instead
 	   of the gdt_ptr contents.  Thus, make it static so it will
diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld
index 83bb7efad8ae..3a2d1360abb0 100644
--- a/arch/x86/boot/setup.ld
+++ b/arch/x86/boot/setup.ld
@@ -24,6 +24,9 @@ SECTIONS
 	.text		: { *(.text .text.*) }
 	.text32		: { *(.text32) }
 
+	.pecompat	: { *(.pecompat) }
+	PROVIDE(pecompat_fsize = setup_size - pecompat_fstart);
+
 	. = ALIGN(16);
 	.rodata		: { *(.rodata*) }
 
@@ -36,9 +39,6 @@ SECTIONS
 	. = ALIGN(16);
 	.data		: { *(.data*) }
 
-	.pecompat	: { *(.pecompat) }
-	PROVIDE(pecompat_fsize = setup_size - pecompat_fstart);
-
 	.signature	: {
 		setup_sig = .;
 		LONG(0x5a5aaa55)
diff --git a/arch/x86/boot/string.c b/arch/x86/boot/string.c
index 1c8541ae3b3a..c23f3b9c84fe 100644
--- a/arch/x86/boot/string.c
+++ b/arch/x86/boot/string.c
@@ -49,7 +49,7 @@ int strcmp(const char *str1, const char *str2)
 {
 	const unsigned char *s1 = (const unsigned char *)str1;
 	const unsigned char *s2 = (const unsigned char *)str2;
-	int delta = 0;
+	int delta;
 
 	while (*s1 || *s2) {
 		delta = *s1 - *s2;
diff --git a/arch/x86/coco/tdx/tdx-shared.c b/arch/x86/coco/tdx/tdx-shared.c
index 78e413269791..1655aa56a0a5 100644
--- a/arch/x86/coco/tdx/tdx-shared.c
+++ b/arch/x86/coco/tdx/tdx-shared.c
@@ -22,13 +22,13 @@ static unsigned long try_accept_one(phys_addr_t start, unsigned long len,
 	 */
 	switch (pg_level) {
 	case PG_LEVEL_4K:
-		page_size = 0;
+		page_size = TDX_PS_4K;
 		break;
 	case PG_LEVEL_2M:
-		page_size = 1;
+		page_size = TDX_PS_2M;
 		break;
 	case PG_LEVEL_1G:
-		page_size = 2;
+		page_size = TDX_PS_1G;
 		break;
 	default:
 		return 0;
diff --git a/arch/x86/coco/tdx/tdx.c b/arch/x86/coco/tdx/tdx.c
index cf1f13c82175..c1cb90369915 100644
--- a/arch/x86/coco/tdx/tdx.c
+++ b/arch/x86/coco/tdx/tdx.c
@@ -887,7 +887,7 @@ void __init tdx_early_init(void)
 	 * there.
 	 *
 	 * Intel-TDX has a secure RDMSR hypercall, but that needs to be
-	 * implemented seperately in the low level startup ASM code.
+	 * implemented separately in the low level startup ASM code.
 	 * Until that is in place, disable parallel bringup for TDX.
 	 */
 	x86_cpuinit.parallel_bringup = false;
diff --git a/arch/x86/crypto/Kconfig b/arch/x86/crypto/Kconfig
index 9bbfd01cfa2f..c9e59589a1ce 100644
--- a/arch/x86/crypto/Kconfig
+++ b/arch/x86/crypto/Kconfig
@@ -189,7 +189,7 @@ config CRYPTO_SERPENT_AVX2_X86_64
 	  Processes 16 blocks in parallel.
 
 config CRYPTO_SM4_AESNI_AVX_X86_64
-	tristate "Ciphers: SM4 with modes: ECB, CBC, CFB, CTR (AES-NI/AVX)"
+	tristate "Ciphers: SM4 with modes: ECB, CBC, CTR (AES-NI/AVX)"
 	depends on X86 && 64BIT
 	select CRYPTO_SKCIPHER
 	select CRYPTO_SIMD
@@ -197,7 +197,7 @@ config CRYPTO_SM4_AESNI_AVX_X86_64
 	select CRYPTO_SM4
 	help
 	  Length-preserving ciphers: SM4 cipher algorithms
-	  (OSCCA GB/T 32907-2016) with ECB, CBC, CFB, and CTR modes
+	  (OSCCA GB/T 32907-2016) with ECB, CBC, and CTR modes
 
 	  Architecture: x86_64 using:
 	  - AES-NI (AES New Instructions)
@@ -210,7 +210,7 @@ config CRYPTO_SM4_AESNI_AVX_X86_64
 	  If unsure, say N.
 
 config CRYPTO_SM4_AESNI_AVX2_X86_64
-	tristate "Ciphers: SM4 with modes: ECB, CBC, CFB, CTR (AES-NI/AVX2)"
+	tristate "Ciphers: SM4 with modes: ECB, CBC, CTR (AES-NI/AVX2)"
 	depends on X86 && 64BIT
 	select CRYPTO_SKCIPHER
 	select CRYPTO_SIMD
@@ -219,7 +219,7 @@ config CRYPTO_SM4_AESNI_AVX2_X86_64
 	select CRYPTO_SM4_AESNI_AVX_X86_64
 	help
 	  Length-preserving ciphers: SM4 cipher algorithms
-	  (OSCCA GB/T 32907-2016) with ECB, CBC, CFB, and CTR modes
+	  (OSCCA GB/T 32907-2016) with ECB, CBC, and CTR modes
 
 	  Architecture: x86_64 using:
 	  - AES-NI (AES New Instructions)
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index 187f913cc239..411d8c83e88a 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -666,7 +666,7 @@ ALL_F:      .octa 0xffffffffffffffffffffffffffffffff
 
 .ifc \operation, dec
 	movdqa	%xmm1, %xmm3
-	pxor	%xmm1, %xmm9		# Cyphertext XOR E(K, Yn)
+	pxor	%xmm1, %xmm9		# Ciphertext XOR E(K, Yn)
 
 	mov	\PLAIN_CYPH_LEN, %r10
 	add	%r13, %r10
diff --git a/arch/x86/crypto/aesni-intel_avx-x86_64.S b/arch/x86/crypto/aesni-intel_avx-x86_64.S
index 74dd230973cf..8c9749ed0651 100644
--- a/arch/x86/crypto/aesni-intel_avx-x86_64.S
+++ b/arch/x86/crypto/aesni-intel_avx-x86_64.S
@@ -747,7 +747,7 @@ VARIABLE_OFFSET = 16*8
 
 .if  \ENC_DEC ==  DEC
         vmovdqa	%xmm1, %xmm3
-        pxor	%xmm1, %xmm9		# Cyphertext XOR E(K, Yn)
+        pxor	%xmm1, %xmm9		# Ciphertext XOR E(K, Yn)
 
         mov	\PLAIN_CYPH_LEN, %r10
         add	%r13, %r10
diff --git a/arch/x86/crypto/crc32c-pcl-intel-asm_64.S b/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
index 81ce0f4db555..bbcff1fb78cb 100644
--- a/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
+++ b/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
@@ -184,7 +184,7 @@ SYM_FUNC_START(crc_pcl)
 	xor     crc1,crc1
 	xor     crc2,crc2
 
-	# Fall thruogh into top of crc array (crc_128)
+	# Fall through into top of crc array (crc_128)
 
 	################################################################
 	## 3) CRC Array:
diff --git a/arch/x86/crypto/sha1_ssse3_glue.c b/arch/x86/crypto/sha1_ssse3_glue.c
index 959afa705e95..ab8bc54f254d 100644
--- a/arch/x86/crypto/sha1_ssse3_glue.c
+++ b/arch/x86/crypto/sha1_ssse3_glue.c
@@ -2,8 +2,8 @@
 /*
  * Cryptographic API.
  *
- * Glue code for the SHA1 Secure Hash Algorithm assembler implementation using
- * Supplemental SSE3 instructions.
+ * Glue code for the SHA1 Secure Hash Algorithm assembler implementations
+ * using SSSE3, AVX, AVX2, and SHA-NI instructions.
  *
  * This file is based on sha1_generic.c
  *
@@ -28,6 +28,9 @@
 #include <asm/simd.h>
 
 static const struct x86_cpu_id module_cpu_ids[] = {
+#ifdef CONFIG_AS_SHA1_NI
+	X86_MATCH_FEATURE(X86_FEATURE_SHA_NI, NULL),
+#endif
 	X86_MATCH_FEATURE(X86_FEATURE_AVX2, NULL),
 	X86_MATCH_FEATURE(X86_FEATURE_AVX, NULL),
 	X86_MATCH_FEATURE(X86_FEATURE_SSSE3, NULL),
diff --git a/arch/x86/crypto/sha256_ssse3_glue.c b/arch/x86/crypto/sha256_ssse3_glue.c
index 4c0383a90e11..e04a43d9f7d5 100644
--- a/arch/x86/crypto/sha256_ssse3_glue.c
+++ b/arch/x86/crypto/sha256_ssse3_glue.c
@@ -1,8 +1,8 @@
 /*
  * Cryptographic API.
  *
- * Glue code for the SHA256 Secure Hash Algorithm assembler
- * implementation using supplemental SSE3 / AVX / AVX2 instructions.
+ * Glue code for the SHA256 Secure Hash Algorithm assembler implementations
+ * using SSSE3, AVX, AVX2, and SHA-NI instructions.
  *
  * This file is based on sha256_generic.c
  *
@@ -45,6 +45,9 @@ asmlinkage void sha256_transform_ssse3(struct sha256_state *state,
 				       const u8 *data, int blocks);
 
 static const struct x86_cpu_id module_cpu_ids[] = {
+#ifdef CONFIG_AS_SHA256_NI
+	X86_MATCH_FEATURE(X86_FEATURE_SHA_NI, NULL),
+#endif
 	X86_MATCH_FEATURE(X86_FEATURE_AVX2, NULL),
 	X86_MATCH_FEATURE(X86_FEATURE_AVX, NULL),
 	X86_MATCH_FEATURE(X86_FEATURE_SSSE3, NULL),
diff --git a/arch/x86/crypto/sha512-avx-asm.S b/arch/x86/crypto/sha512-avx-asm.S
index d902b8ea0721..5bfce4b045fd 100644
--- a/arch/x86/crypto/sha512-avx-asm.S
+++ b/arch/x86/crypto/sha512-avx-asm.S
@@ -84,7 +84,7 @@ frame_size = frame_WK + WK_SIZE
 
 # Useful QWORD "arrays" for simpler memory references
 # MSG, DIGEST, K_t, W_t are arrays
-# WK_2(t) points to 1 of 2 qwords at frame.WK depdending on t being odd/even
+# WK_2(t) points to 1 of 2 qwords at frame.WK depending on t being odd/even
 
 # Input message (arg1)
 #define MSG(i)    8*i(msg)
diff --git a/arch/x86/crypto/sha512-ssse3-asm.S b/arch/x86/crypto/sha512-ssse3-asm.S
index 65be30156816..30a2c4777f9d 100644
--- a/arch/x86/crypto/sha512-ssse3-asm.S
+++ b/arch/x86/crypto/sha512-ssse3-asm.S
@@ -82,7 +82,7 @@ frame_size = frame_WK + WK_SIZE
 
 # Useful QWORD "arrays" for simpler memory references
 # MSG, DIGEST, K_t, W_t are arrays
-# WK_2(t) points to 1 of 2 qwords at frame.WK depdending on t being odd/even
+# WK_2(t) points to 1 of 2 qwords at frame.WK depending on t being odd/even
 
 # Input message (arg1)
 #define MSG(i)    8*i(msg)
diff --git a/arch/x86/crypto/sm4-aesni-avx-asm_64.S b/arch/x86/crypto/sm4-aesni-avx-asm_64.S
index e2668d2fe6ce..2bf611eaa191 100644
--- a/arch/x86/crypto/sm4-aesni-avx-asm_64.S
+++ b/arch/x86/crypto/sm4-aesni-avx-asm_64.S
@@ -534,55 +534,3 @@ SYM_TYPED_FUNC_START(sm4_aesni_avx_cbc_dec_blk8)
 	FRAME_END
 	RET;
 SYM_FUNC_END(sm4_aesni_avx_cbc_dec_blk8)
-
-/*
- * void sm4_aesni_avx_cfb_dec_blk8(const u32 *rk, u8 *dst,
- *                                 const u8 *src, u8 *iv)
- */
-SYM_TYPED_FUNC_START(sm4_aesni_avx_cfb_dec_blk8)
-	/* input:
-	 *	%rdi: round key array, CTX
-	 *	%rsi: dst (8 blocks)
-	 *	%rdx: src (8 blocks)
-	 *	%rcx: iv
-	 */
-	FRAME_BEGIN
-
-	/* Load input */
-	vmovdqu (%rcx), RA0;
-	vmovdqu 0 * 16(%rdx), RA1;
-	vmovdqu 1 * 16(%rdx), RA2;
-	vmovdqu 2 * 16(%rdx), RA3;
-	vmovdqu 3 * 16(%rdx), RB0;
-	vmovdqu 4 * 16(%rdx), RB1;
-	vmovdqu 5 * 16(%rdx), RB2;
-	vmovdqu 6 * 16(%rdx), RB3;
-
-	/* Update IV */
-	vmovdqu 7 * 16(%rdx), RNOT;
-	vmovdqu RNOT, (%rcx);
-
-	call __sm4_crypt_blk8;
-
-	vpxor (0 * 16)(%rdx), RA0, RA0;
-	vpxor (1 * 16)(%rdx), RA1, RA1;
-	vpxor (2 * 16)(%rdx), RA2, RA2;
-	vpxor (3 * 16)(%rdx), RA3, RA3;
-	vpxor (4 * 16)(%rdx), RB0, RB0;
-	vpxor (5 * 16)(%rdx), RB1, RB1;
-	vpxor (6 * 16)(%rdx), RB2, RB2;
-	vpxor (7 * 16)(%rdx), RB3, RB3;
-
-	vmovdqu RA0, (0 * 16)(%rsi);
-	vmovdqu RA1, (1 * 16)(%rsi);
-	vmovdqu RA2, (2 * 16)(%rsi);
-	vmovdqu RA3, (3 * 16)(%rsi);
-	vmovdqu RB0, (4 * 16)(%rsi);
-	vmovdqu RB1, (5 * 16)(%rsi);
-	vmovdqu RB2, (6 * 16)(%rsi);
-	vmovdqu RB3, (7 * 16)(%rsi);
-
-	vzeroall;
-	FRAME_END
-	RET;
-SYM_FUNC_END(sm4_aesni_avx_cfb_dec_blk8)
diff --git a/arch/x86/crypto/sm4-aesni-avx2-asm_64.S b/arch/x86/crypto/sm4-aesni-avx2-asm_64.S
index 98ede9459287..9ff5ba075591 100644
--- a/arch/x86/crypto/sm4-aesni-avx2-asm_64.S
+++ b/arch/x86/crypto/sm4-aesni-avx2-asm_64.S
@@ -439,58 +439,3 @@ SYM_TYPED_FUNC_START(sm4_aesni_avx2_cbc_dec_blk16)
 	FRAME_END
 	RET;
 SYM_FUNC_END(sm4_aesni_avx2_cbc_dec_blk16)
-
-/*
- * void sm4_aesni_avx2_cfb_dec_blk16(const u32 *rk, u8 *dst,
- *                                   const u8 *src, u8 *iv)
- */
-SYM_TYPED_FUNC_START(sm4_aesni_avx2_cfb_dec_blk16)
-	/* input:
-	 *	%rdi: round key array, CTX
-	 *	%rsi: dst (16 blocks)
-	 *	%rdx: src (16 blocks)
-	 *	%rcx: iv
-	 */
-	FRAME_BEGIN
-
-	vzeroupper;
-
-	/* Load input */
-	vmovdqu (%rcx), RNOTx;
-	vinserti128 $1, (%rdx), RNOT, RA0;
-	vmovdqu (0 * 32 + 16)(%rdx), RA1;
-	vmovdqu (1 * 32 + 16)(%rdx), RA2;
-	vmovdqu (2 * 32 + 16)(%rdx), RA3;
-	vmovdqu (3 * 32 + 16)(%rdx), RB0;
-	vmovdqu (4 * 32 + 16)(%rdx), RB1;
-	vmovdqu (5 * 32 + 16)(%rdx), RB2;
-	vmovdqu (6 * 32 + 16)(%rdx), RB3;
-
-	/* Update IV */
-	vmovdqu (7 * 32 + 16)(%rdx), RNOTx;
-	vmovdqu RNOTx, (%rcx);
-
-	call __sm4_crypt_blk16;
-
-	vpxor (0 * 32)(%rdx), RA0, RA0;
-	vpxor (1 * 32)(%rdx), RA1, RA1;
-	vpxor (2 * 32)(%rdx), RA2, RA2;
-	vpxor (3 * 32)(%rdx), RA3, RA3;
-	vpxor (4 * 32)(%rdx), RB0, RB0;
-	vpxor (5 * 32)(%rdx), RB1, RB1;
-	vpxor (6 * 32)(%rdx), RB2, RB2;
-	vpxor (7 * 32)(%rdx), RB3, RB3;
-
-	vmovdqu RA0, (0 * 32)(%rsi);
-	vmovdqu RA1, (1 * 32)(%rsi);
-	vmovdqu RA2, (2 * 32)(%rsi);
-	vmovdqu RA3, (3 * 32)(%rsi);
-	vmovdqu RB0, (4 * 32)(%rsi);
-	vmovdqu RB1, (5 * 32)(%rsi);
-	vmovdqu RB2, (6 * 32)(%rsi);
-	vmovdqu RB3, (7 * 32)(%rsi);
-
-	vzeroall;
-	FRAME_END
-	RET;
-SYM_FUNC_END(sm4_aesni_avx2_cfb_dec_blk16)
diff --git a/arch/x86/crypto/sm4-avx.h b/arch/x86/crypto/sm4-avx.h
index 1bceab7516aa..b5b5e67e40ed 100644
--- a/arch/x86/crypto/sm4-avx.h
+++ b/arch/x86/crypto/sm4-avx.h
@@ -14,10 +14,6 @@ int sm4_cbc_encrypt(struct skcipher_request *req);
 int sm4_avx_cbc_decrypt(struct skcipher_request *req,
 			unsigned int bsize, sm4_crypt_func func);
 
-int sm4_cfb_encrypt(struct skcipher_request *req);
-int sm4_avx_cfb_decrypt(struct skcipher_request *req,
-			unsigned int bsize, sm4_crypt_func func);
-
 int sm4_avx_ctr_crypt(struct skcipher_request *req,
 			unsigned int bsize, sm4_crypt_func func);
 
diff --git a/arch/x86/crypto/sm4_aesni_avx2_glue.c b/arch/x86/crypto/sm4_aesni_avx2_glue.c
index 84bc718f49a3..1148fd4cd57f 100644
--- a/arch/x86/crypto/sm4_aesni_avx2_glue.c
+++ b/arch/x86/crypto/sm4_aesni_avx2_glue.c
@@ -23,8 +23,6 @@ asmlinkage void sm4_aesni_avx2_ctr_enc_blk16(const u32 *rk, u8 *dst,
 					const u8 *src, u8 *iv);
 asmlinkage void sm4_aesni_avx2_cbc_dec_blk16(const u32 *rk, u8 *dst,
 					const u8 *src, u8 *iv);
-asmlinkage void sm4_aesni_avx2_cfb_dec_blk16(const u32 *rk, u8 *dst,
-					const u8 *src, u8 *iv);
 
 static int sm4_skcipher_setkey(struct crypto_skcipher *tfm, const u8 *key,
 			unsigned int key_len)
@@ -41,12 +39,6 @@ static int cbc_decrypt(struct skcipher_request *req)
 }
 
 
-static int cfb_decrypt(struct skcipher_request *req)
-{
-	return sm4_avx_cfb_decrypt(req, SM4_CRYPT16_BLOCK_SIZE,
-				sm4_aesni_avx2_cfb_dec_blk16);
-}
-
 static int ctr_crypt(struct skcipher_request *req)
 {
 	return sm4_avx_ctr_crypt(req, SM4_CRYPT16_BLOCK_SIZE,
@@ -89,24 +81,6 @@ static struct skcipher_alg sm4_aesni_avx2_skciphers[] = {
 		.decrypt	= cbc_decrypt,
 	}, {
 		.base = {
-			.cra_name		= "__cfb(sm4)",
-			.cra_driver_name	= "__cfb-sm4-aesni-avx2",
-			.cra_priority		= 500,
-			.cra_flags		= CRYPTO_ALG_INTERNAL,
-			.cra_blocksize		= 1,
-			.cra_ctxsize		= sizeof(struct sm4_ctx),
-			.cra_module		= THIS_MODULE,
-		},
-		.min_keysize	= SM4_KEY_SIZE,
-		.max_keysize	= SM4_KEY_SIZE,
-		.ivsize		= SM4_BLOCK_SIZE,
-		.chunksize	= SM4_BLOCK_SIZE,
-		.walksize	= 16 * SM4_BLOCK_SIZE,
-		.setkey		= sm4_skcipher_setkey,
-		.encrypt	= sm4_cfb_encrypt,
-		.decrypt	= cfb_decrypt,
-	}, {
-		.base = {
 			.cra_name		= "__ctr(sm4)",
 			.cra_driver_name	= "__ctr-sm4-aesni-avx2",
 			.cra_priority		= 500,
diff --git a/arch/x86/crypto/sm4_aesni_avx_glue.c b/arch/x86/crypto/sm4_aesni_avx_glue.c
index 7800f77d68ad..85b4ca78b47b 100644
--- a/arch/x86/crypto/sm4_aesni_avx_glue.c
+++ b/arch/x86/crypto/sm4_aesni_avx_glue.c
@@ -27,8 +27,6 @@ asmlinkage void sm4_aesni_avx_ctr_enc_blk8(const u32 *rk, u8 *dst,
 				const u8 *src, u8 *iv);
 asmlinkage void sm4_aesni_avx_cbc_dec_blk8(const u32 *rk, u8 *dst,
 				const u8 *src, u8 *iv);
-asmlinkage void sm4_aesni_avx_cfb_dec_blk8(const u32 *rk, u8 *dst,
-				const u8 *src, u8 *iv);
 
 static int sm4_skcipher_setkey(struct crypto_skcipher *tfm, const u8 *key,
 			unsigned int key_len)
@@ -188,116 +186,6 @@ static int cbc_decrypt(struct skcipher_request *req)
 				sm4_aesni_avx_cbc_dec_blk8);
 }
 
-int sm4_cfb_encrypt(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	while ((nbytes = walk.nbytes) > 0) {
-		u8 keystream[SM4_BLOCK_SIZE];
-		const u8 *iv = walk.iv;
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-
-		while (nbytes >= SM4_BLOCK_SIZE) {
-			sm4_crypt_block(ctx->rkey_enc, keystream, iv);
-			crypto_xor_cpy(dst, src, keystream, SM4_BLOCK_SIZE);
-			iv = dst;
-			src += SM4_BLOCK_SIZE;
-			dst += SM4_BLOCK_SIZE;
-			nbytes -= SM4_BLOCK_SIZE;
-		}
-		if (iv != walk.iv)
-			memcpy(walk.iv, iv, SM4_BLOCK_SIZE);
-
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			sm4_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-EXPORT_SYMBOL_GPL(sm4_cfb_encrypt);
-
-int sm4_avx_cfb_decrypt(struct skcipher_request *req,
-			unsigned int bsize, sm4_crypt_func func)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	while ((nbytes = walk.nbytes) > 0) {
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-
-		kernel_fpu_begin();
-
-		while (nbytes >= bsize) {
-			func(ctx->rkey_enc, dst, src, walk.iv);
-			dst += bsize;
-			src += bsize;
-			nbytes -= bsize;
-		}
-
-		while (nbytes >= SM4_BLOCK_SIZE) {
-			u8 keystream[SM4_BLOCK_SIZE * 8];
-			unsigned int nblocks = min(nbytes >> 4, 8u);
-
-			memcpy(keystream, walk.iv, SM4_BLOCK_SIZE);
-			if (nblocks > 1)
-				memcpy(&keystream[SM4_BLOCK_SIZE], src,
-					(nblocks - 1) * SM4_BLOCK_SIZE);
-			memcpy(walk.iv, src + (nblocks - 1) * SM4_BLOCK_SIZE,
-				SM4_BLOCK_SIZE);
-
-			sm4_aesni_avx_crypt8(ctx->rkey_enc, keystream,
-						keystream, nblocks);
-
-			crypto_xor_cpy(dst, src, keystream,
-					nblocks * SM4_BLOCK_SIZE);
-			dst += nblocks * SM4_BLOCK_SIZE;
-			src += nblocks * SM4_BLOCK_SIZE;
-			nbytes -= nblocks * SM4_BLOCK_SIZE;
-		}
-
-		kernel_fpu_end();
-
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			u8 keystream[SM4_BLOCK_SIZE];
-
-			sm4_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-EXPORT_SYMBOL_GPL(sm4_avx_cfb_decrypt);
-
-static int cfb_decrypt(struct skcipher_request *req)
-{
-	return sm4_avx_cfb_decrypt(req, SM4_CRYPT8_BLOCK_SIZE,
-				sm4_aesni_avx_cfb_dec_blk8);
-}
-
 int sm4_avx_ctr_crypt(struct skcipher_request *req,
 			unsigned int bsize, sm4_crypt_func func)
 {
@@ -408,24 +296,6 @@ static struct skcipher_alg sm4_aesni_avx_skciphers[] = {
 		.decrypt	= cbc_decrypt,
 	}, {
 		.base = {
-			.cra_name		= "__cfb(sm4)",
-			.cra_driver_name	= "__cfb-sm4-aesni-avx",
-			.cra_priority		= 400,
-			.cra_flags		= CRYPTO_ALG_INTERNAL,
-			.cra_blocksize		= 1,
-			.cra_ctxsize		= sizeof(struct sm4_ctx),
-			.cra_module		= THIS_MODULE,
-		},
-		.min_keysize	= SM4_KEY_SIZE,
-		.max_keysize	= SM4_KEY_SIZE,
-		.ivsize		= SM4_BLOCK_SIZE,
-		.chunksize	= SM4_BLOCK_SIZE,
-		.walksize	= 8 * SM4_BLOCK_SIZE,
-		.setkey		= sm4_skcipher_setkey,
-		.encrypt	= sm4_cfb_encrypt,
-		.decrypt	= cfb_decrypt,
-	}, {
-		.base = {
 			.cra_name		= "__ctr(sm4)",
 			.cra_driver_name	= "__ctr-sm4-aesni-avx",
 			.cra_priority		= 400,
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index f6907627172b..9f1d94790a54 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -175,8 +175,7 @@ For 32-bit we have the following conventions - kernel is built with
 #define THIS_CPU_user_pcid_flush_mask   \
 	PER_CPU_VAR(cpu_tlbstate) + TLB_STATE_user_pcid_flush_mask
 
-.macro SWITCH_TO_USER_CR3_NOSTACK scratch_reg:req scratch_reg2:req
-	ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+.macro SWITCH_TO_USER_CR3 scratch_reg:req scratch_reg2:req
 	mov	%cr3, \scratch_reg
 
 	ALTERNATIVE "jmp .Lwrcr3_\@", "", X86_FEATURE_PCID
@@ -206,13 +205,20 @@ For 32-bit we have the following conventions - kernel is built with
 	/* Flip the PGD to the user version */
 	orq     $(PTI_USER_PGTABLE_MASK), \scratch_reg
 	mov	\scratch_reg, %cr3
+.endm
+
+.macro SWITCH_TO_USER_CR3_NOSTACK scratch_reg:req scratch_reg2:req
+	ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+	SWITCH_TO_USER_CR3 \scratch_reg \scratch_reg2
 .Lend_\@:
 .endm
 
 .macro SWITCH_TO_USER_CR3_STACK	scratch_reg:req
+	ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
 	pushq	%rax
-	SWITCH_TO_USER_CR3_NOSTACK scratch_reg=\scratch_reg scratch_reg2=%rax
+	SWITCH_TO_USER_CR3 scratch_reg=\scratch_reg scratch_reg2=%rax
 	popq	%rax
+.Lend_\@:
 .endm
 
 .macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req
diff --git a/arch/x86/entry/entry.S b/arch/x86/entry/entry.S
index 8c8d38f0cb1d..003379049924 100644
--- a/arch/x86/entry/entry.S
+++ b/arch/x86/entry/entry.S
@@ -6,6 +6,9 @@
 #include <linux/export.h>
 #include <linux/linkage.h>
 #include <asm/msr-index.h>
+#include <asm/unwind_hints.h>
+#include <asm/segment.h>
+#include <asm/cache.h>
 
 .pushsection .noinstr.text, "ax"
 
@@ -20,3 +23,23 @@ SYM_FUNC_END(entry_ibpb)
 EXPORT_SYMBOL_GPL(entry_ibpb);
 
 .popsection
+
+/*
+ * Define the VERW operand that is disguised as entry code so that
+ * it can be referenced with KPTI enabled. This ensure VERW can be
+ * used late in exit-to-user path after page tables are switched.
+ */
+.pushsection .entry.text, "ax"
+
+.align L1_CACHE_BYTES, 0xcc
+SYM_CODE_START_NOALIGN(mds_verw_sel)
+	UNWIND_HINT_UNDEFINED
+	ANNOTATE_NOENDBR
+	.word __KERNEL_DS
+.align L1_CACHE_BYTES, 0xcc
+SYM_CODE_END(mds_verw_sel);
+/* For KVM */
+EXPORT_SYMBOL_GPL(mds_verw_sel);
+
+.popsection
+
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index c73047bf9f4b..fba427646805 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -885,6 +885,7 @@ SYM_FUNC_START(entry_SYSENTER_32)
 	BUG_IF_WRONG_CR3 no_user_check=1
 	popfl
 	popl	%eax
+	CLEAR_CPU_BUFFERS
 
 	/*
 	 * Return back to the vDSO, which will pop ecx and edx.
@@ -954,6 +955,7 @@ restore_all_switch_stack:
 
 	/* Restore user state */
 	RESTORE_REGS pop=4			# skip orig_eax/error_code
+	CLEAR_CPU_BUFFERS
 .Lirq_return:
 	/*
 	 * ARCH_HAS_MEMBARRIER_SYNC_CORE rely on IRET core serialization
@@ -1146,6 +1148,7 @@ SYM_CODE_START(asm_exc_nmi)
 
 	/* Not on SYSENTER stack. */
 	call	exc_nmi
+	CLEAR_CPU_BUFFERS
 	jmp	.Lnmi_return
 
 .Lnmi_from_sysenter_stack:
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index de6469dffe3a..9bb485977629 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -161,6 +161,7 @@ syscall_return_via_sysret:
 SYM_INNER_LABEL(entry_SYSRETQ_unsafe_stack, SYM_L_GLOBAL)
 	ANNOTATE_NOENDBR
 	swapgs
+	CLEAR_CPU_BUFFERS
 	sysretq
 SYM_INNER_LABEL(entry_SYSRETQ_end, SYM_L_GLOBAL)
 	ANNOTATE_NOENDBR
@@ -559,17 +560,28 @@ __irqentry_text_end:
 SYM_CODE_START_LOCAL(common_interrupt_return)
 SYM_INNER_LABEL(swapgs_restore_regs_and_return_to_usermode, SYM_L_GLOBAL)
 	IBRS_EXIT
-#ifdef CONFIG_DEBUG_ENTRY
-	/* Assert that pt_regs indicates user mode. */
-	testb	$3, CS(%rsp)
-	jnz	1f
-	ud2
-1:
-#endif
 #ifdef CONFIG_XEN_PV
 	ALTERNATIVE "", "jmp xenpv_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV
 #endif
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+	ALTERNATIVE "", "jmp .Lpti_restore_regs_and_return_to_usermode", X86_FEATURE_PTI
+#endif
+
+	STACKLEAK_ERASE
+	POP_REGS
+	add	$8, %rsp	/* orig_ax */
+	UNWIND_HINT_IRET_REGS
+
+.Lswapgs_and_iret:
+	swapgs
+	CLEAR_CPU_BUFFERS
+	/* Assert that the IRET frame indicates user mode. */
+	testb	$3, 8(%rsp)
+	jnz	.Lnative_iret
+	ud2
 
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+.Lpti_restore_regs_and_return_to_usermode:
 	POP_REGS pop_rdi=0
 
 	/*
@@ -596,13 +608,14 @@ SYM_INNER_LABEL(swapgs_restore_regs_and_return_to_usermode, SYM_L_GLOBAL)
 	 */
 	STACKLEAK_ERASE_NOCLOBBER
 
-	SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi
+	push	%rax
+	SWITCH_TO_USER_CR3 scratch_reg=%rdi scratch_reg2=%rax
+	pop	%rax
 
 	/* Restore RDI. */
 	popq	%rdi
-	swapgs
-	jmp	.Lnative_iret
-
+	jmp	.Lswapgs_and_iret
+#endif
 
 SYM_INNER_LABEL(restore_regs_and_return_to_kernel, SYM_L_GLOBAL)
 #ifdef CONFIG_DEBUG_ENTRY
@@ -712,6 +725,8 @@ native_irq_return_ldt:
 	 */
 	popq	%rax				/* Restore user RAX */
 
+	CLEAR_CPU_BUFFERS
+
 	/*
 	 * RSP now points to an ordinary IRET frame, except that the page
 	 * is read-only and RSP[31:16] are preloaded with the userspace
@@ -1439,6 +1454,12 @@ nmi_restore:
 	movq	$0, 5*8(%rsp)		/* clear "NMI executing" */
 
 	/*
+	 * Skip CLEAR_CPU_BUFFERS here, since it only helps in rare cases like
+	 * NMI in kernel after user state is restored. For an unprivileged user
+	 * these conditions are hard to meet.
+	 */
+
+	/*
 	 * iretq reads the "iret" frame and exits the NMI stack in a
 	 * single instruction.  We are returning to kernel mode, so this
 	 * cannot result in a fault.  Similarly, we don't need to worry
@@ -1455,6 +1476,7 @@ SYM_CODE_START(entry_SYSCALL32_ignore)
 	UNWIND_HINT_END_OF_STACK
 	ENDBR
 	mov	$-ENOSYS, %eax
+	CLEAR_CPU_BUFFERS
 	sysretl
 SYM_CODE_END(entry_SYSCALL32_ignore)
 
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index de94e2e84ecc..eabf48c4d4b4 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -270,6 +270,7 @@ SYM_INNER_LABEL(entry_SYSRETL_compat_unsafe_stack, SYM_L_GLOBAL)
 	xorl	%r9d, %r9d
 	xorl	%r10d, %r10d
 	swapgs
+	CLEAR_CPU_BUFFERS
 	sysretl
 SYM_INNER_LABEL(entry_SYSRETL_compat_end, SYM_L_GLOBAL)
 	ANNOTATE_NOENDBR
diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
index c8fac5205803..5f8591ce7f25 100644
--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -461,3 +461,8 @@
 454	i386	futex_wake		sys_futex_wake
 455	i386	futex_wait		sys_futex_wait
 456	i386	futex_requeue		sys_futex_requeue
+457	i386	statmount		sys_statmount
+458	i386	listmount		sys_listmount
+459	i386	lsm_get_self_attr	sys_lsm_get_self_attr
+460	i386	lsm_set_self_attr	sys_lsm_set_self_attr
+461	i386	lsm_list_modules	sys_lsm_list_modules
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index 8cb8bf68721c..7e8d46f4147f 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -378,6 +378,11 @@
 454	common	futex_wake		sys_futex_wake
 455	common	futex_wait		sys_futex_wait
 456	common	futex_requeue		sys_futex_requeue
+457	common	statmount		sys_statmount
+458	common	listmount		sys_listmount
+459	common	lsm_get_self_attr	sys_lsm_get_self_attr
+460	common	lsm_set_self_attr	sys_lsm_set_self_attr
+461	common	lsm_list_modules	sys_lsm_list_modules
 
 #
 # Due to a historical design error, certain syscalls are numbered differently
diff --git a/arch/x86/entry/vdso/vclock_gettime.c b/arch/x86/entry/vdso/vclock_gettime.c
index 7d70935b6758..0debc194bd78 100644
--- a/arch/x86/entry/vdso/vclock_gettime.c
+++ b/arch/x86/entry/vdso/vclock_gettime.c
@@ -11,12 +11,10 @@
 #include <linux/time.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <vdso/gettime.h>
 
 #include "../../../../lib/vdso/gettimeofday.c"
 
-extern int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz);
-extern __kernel_old_time_t __vdso_time(__kernel_old_time_t *t);
-
 int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz)
 {
 	return __cvdso_gettimeofday(tv, tz);
@@ -35,9 +33,6 @@ __kernel_old_time_t time(__kernel_old_time_t *t)	__attribute__((weak, alias("__v
 
 #if defined(CONFIG_X86_64) && !defined(BUILD_VDSO32_64)
 /* both 64-bit and x32 use these */
-extern int __vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts);
-extern int __vdso_clock_getres(clockid_t clock, struct __kernel_timespec *res);
-
 int __vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts)
 {
 	return __cvdso_clock_gettime(clock, ts);
@@ -56,9 +51,6 @@ int clock_getres(clockid_t, struct __kernel_timespec *)
 
 #else
 /* i386 only */
-extern int __vdso_clock_gettime(clockid_t clock, struct old_timespec32 *ts);
-extern int __vdso_clock_getres(clockid_t clock, struct old_timespec32 *res);
-
 int __vdso_clock_gettime(clockid_t clock, struct old_timespec32 *ts)
 {
 	return __cvdso_clock_gettime32(clock, ts);
diff --git a/arch/x86/events/amd/brs.c b/arch/x86/events/amd/brs.c
index ed308719236c..780acd3dff22 100644
--- a/arch/x86/events/amd/brs.c
+++ b/arch/x86/events/amd/brs.c
@@ -125,7 +125,7 @@ int amd_brs_hw_config(struct perf_event *event)
 	 * Where X is the number of taken branches due to interrupt
 	 * skid. Skid is large.
 	 *
-	 * Where Y is the occurences of the event while BRS is
+	 * Where Y is the occurrences of the event while BRS is
 	 * capturing the lbr_nr entries.
 	 *
 	 * By using retired taken branches, we limit the impact on the
diff --git a/arch/x86/events/amd/core.c b/arch/x86/events/amd/core.c
index e24976593a29..81f6d8275b6b 100644
--- a/arch/x86/events/amd/core.c
+++ b/arch/x86/events/amd/core.c
@@ -940,7 +940,7 @@ static int amd_pmu_v2_handle_irq(struct pt_regs *regs)
 			continue;
 
 		if (has_branch_stack(event))
-			perf_sample_save_brstack(&data, event, &cpuc->lbr_stack);
+			perf_sample_save_brstack(&data, event, &cpuc->lbr_stack, NULL);
 
 		if (perf_event_overflow(event, &data, regs))
 			x86_pmu_stop(event, 0);
@@ -1184,7 +1184,7 @@ static void amd_put_event_constraints_f17h(struct cpu_hw_events *cpuc,
  * period of each one and given that the BRS saturates, it would not be possible
  * to guarantee correlated content for all events. Therefore, in situations
  * where multiple events want to use BRS, the kernel enforces mutual exclusion.
- * Exclusion is enforced by chosing only one counter for events using BRS.
+ * Exclusion is enforced by choosing only one counter for events using BRS.
  * The event scheduling logic will then automatically multiplex the
  * events and ensure that at most one event is actively using BRS.
  *
diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 6911c5399d02..e91970b01d62 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -287,6 +287,9 @@ static int perf_ibs_init(struct perf_event *event)
 	if (config & ~perf_ibs->config_mask)
 		return -EINVAL;
 
+	if (has_branch_stack(event))
+		return -EOPNOTSUPP;
+
 	ret = validate_group(event);
 	if (ret)
 		return ret;
diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c
index 40ad1425ffa2..09050641ce5d 100644
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -601,7 +601,7 @@ int x86_pmu_hw_config(struct perf_event *event)
 		}
 	}
 
-	if (event->attr.branch_sample_type & PERF_SAMPLE_BRANCH_CALL_STACK)
+	if (branch_sample_call_stack(event))
 		event->attach_state |= PERF_ATTACH_TASK_DATA;
 
 	/*
@@ -1702,7 +1702,7 @@ int x86_pmu_handle_irq(struct pt_regs *regs)
 		perf_sample_data_init(&data, 0, event->hw.last_period);
 
 		if (has_branch_stack(event))
-			perf_sample_save_brstack(&data, event, &cpuc->lbr_stack);
+			perf_sample_save_brstack(&data, event, &cpuc->lbr_stack, NULL);
 
 		if (perf_event_overflow(event, &data, regs))
 			x86_pmu_stop(event, 0);
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index 0f2786d4e405..3804f21ab049 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -2527,9 +2527,14 @@ static void intel_pmu_assign_event(struct perf_event *event, int idx)
 		perf_report_aux_output_id(event, idx);
 }
 
+static __always_inline bool intel_pmu_needs_branch_stack(struct perf_event *event)
+{
+	return event->hw.flags & PERF_X86_EVENT_NEEDS_BRANCH_STACK;
+}
+
 static void intel_pmu_del_event(struct perf_event *event)
 {
-	if (needs_branch_stack(event))
+	if (intel_pmu_needs_branch_stack(event))
 		intel_pmu_lbr_del(event);
 	if (event->attr.precise_ip)
 		intel_pmu_pebs_del(event);
@@ -2787,6 +2792,7 @@ static void intel_pmu_enable_fixed(struct perf_event *event)
 
 static void intel_pmu_enable_event(struct perf_event *event)
 {
+	u64 enable_mask = ARCH_PERFMON_EVENTSEL_ENABLE;
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
 
@@ -2795,8 +2801,10 @@ static void intel_pmu_enable_event(struct perf_event *event)
 
 	switch (idx) {
 	case 0 ... INTEL_PMC_IDX_FIXED - 1:
+		if (branch_sample_counters(event))
+			enable_mask |= ARCH_PERFMON_EVENTSEL_BR_CNTR;
 		intel_set_masks(event, idx);
-		__x86_pmu_enable_event(hwc, ARCH_PERFMON_EVENTSEL_ENABLE);
+		__x86_pmu_enable_event(hwc, enable_mask);
 		break;
 	case INTEL_PMC_IDX_FIXED ... INTEL_PMC_IDX_FIXED_BTS - 1:
 	case INTEL_PMC_IDX_METRIC_BASE ... INTEL_PMC_IDX_METRIC_END:
@@ -2820,7 +2828,7 @@ static void intel_pmu_add_event(struct perf_event *event)
 {
 	if (event->attr.precise_ip)
 		intel_pmu_pebs_add(event);
-	if (needs_branch_stack(event))
+	if (intel_pmu_needs_branch_stack(event))
 		intel_pmu_lbr_add(event);
 }
 
@@ -3047,7 +3055,7 @@ static int handle_pmi_common(struct pt_regs *regs, u64 status)
 		perf_sample_data_init(&data, 0, event->hw.last_period);
 
 		if (has_branch_stack(event))
-			perf_sample_save_brstack(&data, event, &cpuc->lbr_stack);
+			intel_pmu_lbr_save_brstack(&data, cpuc, event);
 
 		if (perf_event_overflow(event, &data, regs))
 			x86_pmu_stop(event, 0);
@@ -3612,6 +3620,13 @@ intel_get_event_constraints(struct cpu_hw_events *cpuc, int idx,
 	if (cpuc->excl_cntrs)
 		return intel_get_excl_constraints(cpuc, event, idx, c2);
 
+	/* Not all counters support the branch counter feature. */
+	if (branch_sample_counters(event)) {
+		c2 = dyn_constraint(cpuc, c2, idx);
+		c2->idxmsk64 &= x86_pmu.lbr_counters;
+		c2->weight = hweight64(c2->idxmsk64);
+	}
+
 	return c2;
 }
 
@@ -3897,7 +3912,62 @@ static int intel_pmu_hw_config(struct perf_event *event)
 			x86_pmu.pebs_aliases(event);
 	}
 
-	if (needs_branch_stack(event)) {
+	if (needs_branch_stack(event) && is_sampling_event(event))
+		event->hw.flags  |= PERF_X86_EVENT_NEEDS_BRANCH_STACK;
+
+	if (branch_sample_counters(event)) {
+		struct perf_event *leader, *sibling;
+		int num = 0;
+
+		if (!(x86_pmu.flags & PMU_FL_BR_CNTR) ||
+		    (event->attr.config & ~INTEL_ARCH_EVENT_MASK))
+			return -EINVAL;
+
+		/*
+		 * The branch counter logging is not supported in the call stack
+		 * mode yet, since we cannot simply flush the LBR during e.g.,
+		 * multiplexing. Also, there is no obvious usage with the call
+		 * stack mode. Simply forbids it for now.
+		 *
+		 * If any events in the group enable the branch counter logging
+		 * feature, the group is treated as a branch counter logging
+		 * group, which requires the extra space to store the counters.
+		 */
+		leader = event->group_leader;
+		if (branch_sample_call_stack(leader))
+			return -EINVAL;
+		if (branch_sample_counters(leader))
+			num++;
+		leader->hw.flags |= PERF_X86_EVENT_BRANCH_COUNTERS;
+
+		for_each_sibling_event(sibling, leader) {
+			if (branch_sample_call_stack(sibling))
+				return -EINVAL;
+			if (branch_sample_counters(sibling))
+				num++;
+		}
+
+		if (num > fls(x86_pmu.lbr_counters))
+			return -EINVAL;
+		/*
+		 * Only applying the PERF_SAMPLE_BRANCH_COUNTERS doesn't
+		 * require any branch stack setup.
+		 * Clear the bit to avoid unnecessary branch stack setup.
+		 */
+		if (0 == (event->attr.branch_sample_type &
+			  ~(PERF_SAMPLE_BRANCH_PLM_ALL |
+			    PERF_SAMPLE_BRANCH_COUNTERS)))
+			event->hw.flags  &= ~PERF_X86_EVENT_NEEDS_BRANCH_STACK;
+
+		/*
+		 * Force the leader to be a LBR event. So LBRs can be reset
+		 * with the leader event. See intel_pmu_lbr_del() for details.
+		 */
+		if (!intel_pmu_needs_branch_stack(leader))
+			return -EINVAL;
+	}
+
+	if (intel_pmu_needs_branch_stack(event)) {
 		ret = intel_pmu_setup_lbr_filter(event);
 		if (ret)
 			return ret;
@@ -4027,7 +4097,7 @@ static int intel_pmu_hw_config(struct perf_event *event)
 
 /*
  * Currently, the only caller of this function is the atomic_switch_perf_msrs().
- * The host perf conext helps to prepare the values of the real hardware for
+ * The host perf context helps to prepare the values of the real hardware for
  * a set of msrs that need to be switched atomically in a vmx transaction.
  *
  * For example, the pseudocode needed to add a new msr should look like:
@@ -4380,8 +4450,13 @@ cmt_get_event_constraints(struct cpu_hw_events *cpuc, int idx,
 	 */
 	if (event->attr.precise_ip == 3) {
 		/* Force instruction:ppp on PMC0, 1 and Fixed counter 0 */
-		if (constraint_match(&fixed0_constraint, event->hw.config))
-			return &fixed0_counter0_1_constraint;
+		if (constraint_match(&fixed0_constraint, event->hw.config)) {
+			/* The fixed counter 0 doesn't support LBR event logging. */
+			if (branch_sample_counters(event))
+				return &counter0_1_constraint;
+			else
+				return &fixed0_counter0_1_constraint;
+		}
 
 		switch (c->idxmsk64 & 0x3ull) {
 		case 0x1:
@@ -4560,7 +4635,7 @@ int intel_cpuc_prepare(struct cpu_hw_events *cpuc, int cpu)
 			goto err;
 	}
 
-	if (x86_pmu.flags & (PMU_FL_EXCL_CNTRS | PMU_FL_TFA)) {
+	if (x86_pmu.flags & (PMU_FL_EXCL_CNTRS | PMU_FL_TFA | PMU_FL_BR_CNTR)) {
 		size_t sz = X86_PMC_IDX_MAX * sizeof(struct event_constraint);
 
 		cpuc->constraint_list = kzalloc_node(sz, GFP_KERNEL, cpu_to_node(cpu));
@@ -5532,11 +5607,41 @@ static ssize_t branches_show(struct device *cdev,
 
 static DEVICE_ATTR_RO(branches);
 
+static ssize_t branch_counter_nr_show(struct device *cdev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", fls(x86_pmu.lbr_counters));
+}
+
+static DEVICE_ATTR_RO(branch_counter_nr);
+
+static ssize_t branch_counter_width_show(struct device *cdev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", LBR_INFO_BR_CNTR_BITS);
+}
+
+static DEVICE_ATTR_RO(branch_counter_width);
+
 static struct attribute *lbr_attrs[] = {
 	&dev_attr_branches.attr,
+	&dev_attr_branch_counter_nr.attr,
+	&dev_attr_branch_counter_width.attr,
 	NULL
 };
 
+static umode_t
+lbr_is_visible(struct kobject *kobj, struct attribute *attr, int i)
+{
+	/* branches */
+	if (i == 0)
+		return x86_pmu.lbr_nr ? attr->mode : 0;
+
+	return (x86_pmu.flags & PMU_FL_BR_CNTR) ? attr->mode : 0;
+}
+
 static char pmu_name_str[30];
 
 static ssize_t pmu_name_show(struct device *cdev,
@@ -5564,6 +5669,15 @@ static struct attribute *intel_pmu_attrs[] = {
 };
 
 static umode_t
+default_is_visible(struct kobject *kobj, struct attribute *attr, int i)
+{
+	if (attr == &dev_attr_allow_tsx_force_abort.attr)
+		return x86_pmu.flags & PMU_FL_TFA ? attr->mode : 0;
+
+	return attr->mode;
+}
+
+static umode_t
 tsx_is_visible(struct kobject *kobj, struct attribute *attr, int i)
 {
 	return boot_cpu_has(X86_FEATURE_RTM) ? attr->mode : 0;
@@ -5585,26 +5699,11 @@ mem_is_visible(struct kobject *kobj, struct attribute *attr, int i)
 }
 
 static umode_t
-lbr_is_visible(struct kobject *kobj, struct attribute *attr, int i)
-{
-	return x86_pmu.lbr_nr ? attr->mode : 0;
-}
-
-static umode_t
 exra_is_visible(struct kobject *kobj, struct attribute *attr, int i)
 {
 	return x86_pmu.version >= 2 ? attr->mode : 0;
 }
 
-static umode_t
-default_is_visible(struct kobject *kobj, struct attribute *attr, int i)
-{
-	if (attr == &dev_attr_allow_tsx_force_abort.attr)
-		return x86_pmu.flags & PMU_FL_TFA ? attr->mode : 0;
-
-	return attr->mode;
-}
-
 static struct attribute_group group_events_td  = {
 	.name = "events",
 };
diff --git a/arch/x86/events/intel/cstate.c b/arch/x86/events/intel/cstate.c
index cbeb6d2bf5b4..4b50a3a9818a 100644
--- a/arch/x86/events/intel/cstate.c
+++ b/arch/x86/events/intel/cstate.c
@@ -41,7 +41,7 @@
  *	MSR_CORE_C1_RES: CORE C1 Residency Counter
  *			 perf code: 0x00
  *			 Available model: SLM,AMT,GLM,CNL,ICX,TNT,ADL,RPL
- *					  MTL
+ *					  MTL,SRF,GRR
  *			 Scope: Core (each processor core has a MSR)
  *	MSR_CORE_C3_RESIDENCY: CORE C3 Residency Counter
  *			       perf code: 0x01
@@ -52,7 +52,8 @@
  *			       perf code: 0x02
  *			       Available model: SLM,AMT,NHM,WSM,SNB,IVB,HSW,BDW,
  *						SKL,KNL,GLM,CNL,KBL,CML,ICL,ICX,
- *						TGL,TNT,RKL,ADL,RPL,SPR,MTL
+ *						TGL,TNT,RKL,ADL,RPL,SPR,MTL,SRF,
+ *						GRR
  *			       Scope: Core
  *	MSR_CORE_C7_RESIDENCY: CORE C7 Residency Counter
  *			       perf code: 0x03
@@ -75,7 +76,7 @@
  *			       perf code: 0x02
  *			       Available model: SLM,AMT,NHM,WSM,SNB,IVB,HSW,BDW,
  *						SKL,KNL,GLM,CNL,KBL,CML,ICL,ICX,
- *						TGL,TNT,RKL,ADL,RPL,SPR,MTL
+ *						TGL,TNT,RKL,ADL,RPL,SPR,MTL,SRF
  *			       Scope: Package (physical package)
  *	MSR_PKG_C7_RESIDENCY:  Package C7 Residency Counter.
  *			       perf code: 0x03
@@ -97,6 +98,10 @@
  *			       Available model: HSW ULT,KBL,GLM,CNL,CML,ICL,TGL,
  *						TNT,RKL,ADL,RPL,MTL
  *			       Scope: Package (physical package)
+ *	MSR_MODULE_C6_RES_MS:  Module C6 Residency Counter.
+ *			       perf code: 0x00
+ *			       Available model: SRF,GRR
+ *			       Scope: A cluster of cores shared L2 cache
  *
  */
 
@@ -130,6 +135,7 @@ static ssize_t cstate_get_attr_cpumask(struct device *dev,
 struct cstate_model {
 	unsigned long		core_events;
 	unsigned long		pkg_events;
+	unsigned long		module_events;
 	unsigned long		quirks;
 };
 
@@ -189,20 +195,20 @@ static struct attribute *attrs_empty[] = {
  * "events" group (with empty attrs) before updating
  * it with detected events.
  */
-static struct attribute_group core_events_attr_group = {
+static struct attribute_group cstate_events_attr_group = {
 	.name = "events",
 	.attrs = attrs_empty,
 };
 
-DEFINE_CSTATE_FORMAT_ATTR(core_event, event, "config:0-63");
-static struct attribute *core_format_attrs[] = {
-	&format_attr_core_event.attr,
+DEFINE_CSTATE_FORMAT_ATTR(cstate_event, event, "config:0-63");
+static struct attribute *cstate_format_attrs[] = {
+	&format_attr_cstate_event.attr,
 	NULL,
 };
 
-static struct attribute_group core_format_attr_group = {
+static struct attribute_group cstate_format_attr_group = {
 	.name = "format",
-	.attrs = core_format_attrs,
+	.attrs = cstate_format_attrs,
 };
 
 static cpumask_t cstate_core_cpu_mask;
@@ -217,9 +223,9 @@ static struct attribute_group cpumask_attr_group = {
 	.attrs = cstate_cpumask_attrs,
 };
 
-static const struct attribute_group *core_attr_groups[] = {
-	&core_events_attr_group,
-	&core_format_attr_group,
+static const struct attribute_group *cstate_attr_groups[] = {
+	&cstate_events_attr_group,
+	&cstate_format_attr_group,
 	&cpumask_attr_group,
 	NULL,
 };
@@ -268,30 +274,30 @@ static struct perf_msr pkg_msr[] = {
 	[PERF_CSTATE_PKG_C10_RES] = { MSR_PKG_C10_RESIDENCY,	&group_cstate_pkg_c10,	test_msr },
 };
 
-static struct attribute_group pkg_events_attr_group = {
-	.name = "events",
-	.attrs = attrs_empty,
-};
+static cpumask_t cstate_pkg_cpu_mask;
 
-DEFINE_CSTATE_FORMAT_ATTR(pkg_event, event, "config:0-63");
-static struct attribute *pkg_format_attrs[] = {
-	&format_attr_pkg_event.attr,
-	NULL,
-};
-static struct attribute_group pkg_format_attr_group = {
-	.name = "format",
-	.attrs = pkg_format_attrs,
+/* cstate_module PMU */
+static struct pmu cstate_module_pmu;
+static bool has_cstate_module;
+
+enum perf_cstate_module_events {
+	PERF_CSTATE_MODULE_C6_RES = 0,
+
+	PERF_CSTATE_MODULE_EVENT_MAX,
 };
 
-static cpumask_t cstate_pkg_cpu_mask;
+PMU_EVENT_ATTR_STRING(c6-residency, attr_cstate_module_c6, "event=0x00");
 
-static const struct attribute_group *pkg_attr_groups[] = {
-	&pkg_events_attr_group,
-	&pkg_format_attr_group,
-	&cpumask_attr_group,
-	NULL,
+static unsigned long module_msr_mask;
+
+PMU_EVENT_GROUP(events, cstate_module_c6);
+
+static struct perf_msr module_msr[] = {
+	[PERF_CSTATE_MODULE_C6_RES]  = { MSR_MODULE_C6_RES_MS,	&group_cstate_module_c6,	test_msr },
 };
 
+static cpumask_t cstate_module_cpu_mask;
+
 static ssize_t cstate_get_attr_cpumask(struct device *dev,
 				       struct device_attribute *attr,
 				       char *buf)
@@ -302,6 +308,8 @@ static ssize_t cstate_get_attr_cpumask(struct device *dev,
 		return cpumap_print_to_pagebuf(true, buf, &cstate_core_cpu_mask);
 	else if (pmu == &cstate_pkg_pmu)
 		return cpumap_print_to_pagebuf(true, buf, &cstate_pkg_cpu_mask);
+	else if (pmu == &cstate_module_pmu)
+		return cpumap_print_to_pagebuf(true, buf, &cstate_module_cpu_mask);
 	else
 		return 0;
 }
@@ -342,6 +350,15 @@ static int cstate_pmu_event_init(struct perf_event *event)
 		event->hw.event_base = pkg_msr[cfg].msr;
 		cpu = cpumask_any_and(&cstate_pkg_cpu_mask,
 				      topology_die_cpumask(event->cpu));
+	} else if (event->pmu == &cstate_module_pmu) {
+		if (cfg >= PERF_CSTATE_MODULE_EVENT_MAX)
+			return -EINVAL;
+		cfg = array_index_nospec((unsigned long)cfg, PERF_CSTATE_MODULE_EVENT_MAX);
+		if (!(module_msr_mask & (1 << cfg)))
+			return -EINVAL;
+		event->hw.event_base = module_msr[cfg].msr;
+		cpu = cpumask_any_and(&cstate_module_cpu_mask,
+				      topology_cluster_cpumask(event->cpu));
 	} else {
 		return -ENOENT;
 	}
@@ -429,6 +446,17 @@ static int cstate_cpu_exit(unsigned int cpu)
 			perf_pmu_migrate_context(&cstate_pkg_pmu, cpu, target);
 		}
 	}
+
+	if (has_cstate_module &&
+	    cpumask_test_and_clear_cpu(cpu, &cstate_module_cpu_mask)) {
+
+		target = cpumask_any_but(topology_cluster_cpumask(cpu), cpu);
+		/* Migrate events if there is a valid target */
+		if (target < nr_cpu_ids) {
+			cpumask_set_cpu(target, &cstate_module_cpu_mask);
+			perf_pmu_migrate_context(&cstate_module_pmu, cpu, target);
+		}
+	}
 	return 0;
 }
 
@@ -455,6 +483,15 @@ static int cstate_cpu_init(unsigned int cpu)
 	if (has_cstate_pkg && target >= nr_cpu_ids)
 		cpumask_set_cpu(cpu, &cstate_pkg_cpu_mask);
 
+	/*
+	 * If this is the first online thread of that cluster, set it
+	 * in the cluster cpu mask as the designated reader.
+	 */
+	target = cpumask_any_and(&cstate_module_cpu_mask,
+				 topology_cluster_cpumask(cpu));
+	if (has_cstate_module && target >= nr_cpu_ids)
+		cpumask_set_cpu(cpu, &cstate_module_cpu_mask);
+
 	return 0;
 }
 
@@ -477,8 +514,13 @@ static const struct attribute_group *pkg_attr_update[] = {
 	NULL,
 };
 
+static const struct attribute_group *module_attr_update[] = {
+	&group_cstate_module_c6,
+	NULL
+};
+
 static struct pmu cstate_core_pmu = {
-	.attr_groups	= core_attr_groups,
+	.attr_groups	= cstate_attr_groups,
 	.attr_update	= core_attr_update,
 	.name		= "cstate_core",
 	.task_ctx_nr	= perf_invalid_context,
@@ -493,7 +535,7 @@ static struct pmu cstate_core_pmu = {
 };
 
 static struct pmu cstate_pkg_pmu = {
-	.attr_groups	= pkg_attr_groups,
+	.attr_groups	= cstate_attr_groups,
 	.attr_update	= pkg_attr_update,
 	.name		= "cstate_pkg",
 	.task_ctx_nr	= perf_invalid_context,
@@ -507,6 +549,21 @@ static struct pmu cstate_pkg_pmu = {
 	.module		= THIS_MODULE,
 };
 
+static struct pmu cstate_module_pmu = {
+	.attr_groups	= cstate_attr_groups,
+	.attr_update	= module_attr_update,
+	.name		= "cstate_module",
+	.task_ctx_nr	= perf_invalid_context,
+	.event_init	= cstate_pmu_event_init,
+	.add		= cstate_pmu_event_add,
+	.del		= cstate_pmu_event_del,
+	.start		= cstate_pmu_event_start,
+	.stop		= cstate_pmu_event_stop,
+	.read		= cstate_pmu_event_update,
+	.capabilities	= PERF_PMU_CAP_NO_INTERRUPT | PERF_PMU_CAP_NO_EXCLUDE,
+	.module		= THIS_MODULE,
+};
+
 static const struct cstate_model nhm_cstates __initconst = {
 	.core_events		= BIT(PERF_CSTATE_CORE_C3_RES) |
 				  BIT(PERF_CSTATE_CORE_C6_RES),
@@ -621,6 +678,22 @@ static const struct cstate_model glm_cstates __initconst = {
 				  BIT(PERF_CSTATE_PKG_C10_RES),
 };
 
+static const struct cstate_model grr_cstates __initconst = {
+	.core_events		= BIT(PERF_CSTATE_CORE_C1_RES) |
+				  BIT(PERF_CSTATE_CORE_C6_RES),
+
+	.module_events		= BIT(PERF_CSTATE_MODULE_C6_RES),
+};
+
+static const struct cstate_model srf_cstates __initconst = {
+	.core_events		= BIT(PERF_CSTATE_CORE_C1_RES) |
+				  BIT(PERF_CSTATE_CORE_C6_RES),
+
+	.pkg_events		= BIT(PERF_CSTATE_PKG_C6_RES),
+
+	.module_events		= BIT(PERF_CSTATE_MODULE_C6_RES),
+};
+
 
 static const struct x86_cpu_id intel_cstates_match[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(NEHALEM,		&nhm_cstates),
@@ -673,6 +746,8 @@ static const struct x86_cpu_id intel_cstates_match[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT,	&glm_cstates),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	&glm_cstates),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GRACEMONT,	&adl_cstates),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_CRESTMONT_X,	&srf_cstates),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_CRESTMONT,	&grr_cstates),
 
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L,		&icl_cstates),
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE,		&icl_cstates),
@@ -714,10 +789,14 @@ static int __init cstate_probe(const struct cstate_model *cm)
 	pkg_msr_mask = perf_msr_probe(pkg_msr, PERF_CSTATE_PKG_EVENT_MAX,
 				      true, (void *) &cm->pkg_events);
 
+	module_msr_mask = perf_msr_probe(module_msr, PERF_CSTATE_MODULE_EVENT_MAX,
+				      true, (void *) &cm->module_events);
+
 	has_cstate_core = !!core_msr_mask;
 	has_cstate_pkg  = !!pkg_msr_mask;
+	has_cstate_module  = !!module_msr_mask;
 
-	return (has_cstate_core || has_cstate_pkg) ? 0 : -ENODEV;
+	return (has_cstate_core || has_cstate_pkg || has_cstate_module) ? 0 : -ENODEV;
 }
 
 static inline void cstate_cleanup(void)
@@ -730,6 +809,9 @@ static inline void cstate_cleanup(void)
 
 	if (has_cstate_pkg)
 		perf_pmu_unregister(&cstate_pkg_pmu);
+
+	if (has_cstate_module)
+		perf_pmu_unregister(&cstate_module_pmu);
 }
 
 static int __init cstate_init(void)
@@ -766,6 +848,16 @@ static int __init cstate_init(void)
 			return err;
 		}
 	}
+
+	if (has_cstate_module) {
+		err = perf_pmu_register(&cstate_module_pmu, cstate_module_pmu.name, -1);
+		if (err) {
+			has_cstate_module = false;
+			pr_info("Failed to register cstate cluster pmu\n");
+			cstate_cleanup();
+			return err;
+		}
+	}
 	return 0;
 }
 
diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index bf97ab904d40..d49d661ec0a7 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -1755,7 +1755,7 @@ static void setup_pebs_fixed_sample_data(struct perf_event *event,
 		setup_pebs_time(event, data, pebs->tsc);
 
 	if (has_branch_stack(event))
-		perf_sample_save_brstack(data, event, &cpuc->lbr_stack);
+		perf_sample_save_brstack(data, event, &cpuc->lbr_stack, NULL);
 }
 
 static void adaptive_pebs_save_regs(struct pt_regs *regs,
@@ -1912,7 +1912,7 @@ static void setup_pebs_adaptive_sample_data(struct perf_event *event,
 
 		if (has_branch_stack(event)) {
 			intel_pmu_store_pebs_lbrs(lbr);
-			perf_sample_save_brstack(data, event, &cpuc->lbr_stack);
+			intel_pmu_lbr_save_brstack(data, cpuc, event);
 		}
 	}
 
diff --git a/arch/x86/events/intel/lbr.c b/arch/x86/events/intel/lbr.c
index c3b0d15a9841..78cd5084104e 100644
--- a/arch/x86/events/intel/lbr.c
+++ b/arch/x86/events/intel/lbr.c
@@ -676,6 +676,25 @@ void intel_pmu_lbr_del(struct perf_event *event)
 	WARN_ON_ONCE(cpuc->lbr_users < 0);
 	WARN_ON_ONCE(cpuc->lbr_pebs_users < 0);
 	perf_sched_cb_dec(event->pmu);
+
+	/*
+	 * The logged occurrences information is only valid for the
+	 * current LBR group. If another LBR group is scheduled in
+	 * later, the information from the stale LBRs will be wrongly
+	 * interpreted. Reset the LBRs here.
+	 *
+	 * Only clear once for a branch counter group with the leader
+	 * event. Because
+	 * - Cannot simply reset the LBRs with the !cpuc->lbr_users.
+	 *   Because it's possible that the last LBR user is not in a
+	 *   branch counter group, e.g., a branch_counters group +
+	 *   several normal LBR events.
+	 * - The LBR reset can be done with any one of the events in a
+	 *   branch counter group, since they are always scheduled together.
+	 *   It's easy to force the leader event an LBR event.
+	 */
+	if (is_branch_counters_group(event) && event == event->group_leader)
+		intel_pmu_lbr_reset();
 }
 
 static inline bool vlbr_exclude_host(void)
@@ -866,6 +885,8 @@ static __always_inline u16 get_lbr_cycles(u64 info)
 	return cycles;
 }
 
+static_assert((64 - PERF_BRANCH_ENTRY_INFO_BITS_MAX) > LBR_INFO_BR_CNTR_NUM * LBR_INFO_BR_CNTR_BITS);
+
 static void intel_pmu_store_lbr(struct cpu_hw_events *cpuc,
 				struct lbr_entry *entries)
 {
@@ -898,11 +919,67 @@ static void intel_pmu_store_lbr(struct cpu_hw_events *cpuc,
 		e->abort	= !!(info & LBR_INFO_ABORT);
 		e->cycles	= get_lbr_cycles(info);
 		e->type		= get_lbr_br_type(info);
+
+		/*
+		 * Leverage the reserved field of cpuc->lbr_entries[i] to
+		 * temporarily store the branch counters information.
+		 * The later code will decide what content can be disclosed
+		 * to the perf tool. Pleae see intel_pmu_lbr_counters_reorder().
+		 */
+		e->reserved	= (info >> LBR_INFO_BR_CNTR_OFFSET) & LBR_INFO_BR_CNTR_FULL_MASK;
 	}
 
 	cpuc->lbr_stack.nr = i;
 }
 
+/*
+ * The enabled order may be different from the counter order.
+ * Update the lbr_counters with the enabled order.
+ */
+static void intel_pmu_lbr_counters_reorder(struct cpu_hw_events *cpuc,
+					   struct perf_event *event)
+{
+	int i, j, pos = 0, order[X86_PMC_IDX_MAX];
+	struct perf_event *leader, *sibling;
+	u64 src, dst, cnt;
+
+	leader = event->group_leader;
+	if (branch_sample_counters(leader))
+		order[pos++] = leader->hw.idx;
+
+	for_each_sibling_event(sibling, leader) {
+		if (!branch_sample_counters(sibling))
+			continue;
+		order[pos++] = sibling->hw.idx;
+	}
+
+	WARN_ON_ONCE(!pos);
+
+	for (i = 0; i < cpuc->lbr_stack.nr; i++) {
+		src = cpuc->lbr_entries[i].reserved;
+		dst = 0;
+		for (j = 0; j < pos; j++) {
+			cnt = (src >> (order[j] * LBR_INFO_BR_CNTR_BITS)) & LBR_INFO_BR_CNTR_MASK;
+			dst |= cnt << j * LBR_INFO_BR_CNTR_BITS;
+		}
+		cpuc->lbr_counters[i] = dst;
+		cpuc->lbr_entries[i].reserved = 0;
+	}
+}
+
+void intel_pmu_lbr_save_brstack(struct perf_sample_data *data,
+				struct cpu_hw_events *cpuc,
+				struct perf_event *event)
+{
+	if (is_branch_counters_group(event)) {
+		intel_pmu_lbr_counters_reorder(cpuc, event);
+		perf_sample_save_brstack(data, event, &cpuc->lbr_stack, cpuc->lbr_counters);
+		return;
+	}
+
+	perf_sample_save_brstack(data, event, &cpuc->lbr_stack, NULL);
+}
+
 static void intel_pmu_arch_lbr_read(struct cpu_hw_events *cpuc)
 {
 	intel_pmu_store_lbr(cpuc, NULL);
@@ -1173,8 +1250,10 @@ intel_pmu_lbr_filter(struct cpu_hw_events *cpuc)
 	for (i = 0; i < cpuc->lbr_stack.nr; ) {
 		if (!cpuc->lbr_entries[i].from) {
 			j = i;
-			while (++j < cpuc->lbr_stack.nr)
+			while (++j < cpuc->lbr_stack.nr) {
 				cpuc->lbr_entries[j-1] = cpuc->lbr_entries[j];
+				cpuc->lbr_counters[j-1] = cpuc->lbr_counters[j];
+			}
 			cpuc->lbr_stack.nr--;
 			if (!cpuc->lbr_entries[i].from)
 				continue;
@@ -1525,8 +1604,12 @@ void __init intel_pmu_arch_lbr_init(void)
 	x86_pmu.lbr_mispred = ecx.split.lbr_mispred;
 	x86_pmu.lbr_timed_lbr = ecx.split.lbr_timed_lbr;
 	x86_pmu.lbr_br_type = ecx.split.lbr_br_type;
+	x86_pmu.lbr_counters = ecx.split.lbr_counters;
 	x86_pmu.lbr_nr = lbr_nr;
 
+	if (!!x86_pmu.lbr_counters)
+		x86_pmu.flags |= PMU_FL_BR_CNTR;
+
 	if (x86_pmu.lbr_mispred)
 		static_branch_enable(&x86_lbr_mispred);
 	if (x86_pmu.lbr_timed_lbr)
diff --git a/arch/x86/events/intel/uncore.c b/arch/x86/events/intel/uncore.c
index 01023aa5125b..7927c0b832fa 100644
--- a/arch/x86/events/intel/uncore.c
+++ b/arch/x86/events/intel/uncore.c
@@ -1814,6 +1814,14 @@ static const struct intel_uncore_init_fun spr_uncore_init __initconst = {
 	.uncore_units_ignore = spr_uncore_units_ignore,
 };
 
+static const struct intel_uncore_init_fun gnr_uncore_init __initconst = {
+	.cpu_init = gnr_uncore_cpu_init,
+	.pci_init = gnr_uncore_pci_init,
+	.mmio_init = gnr_uncore_mmio_init,
+	.use_discovery = true,
+	.uncore_units_ignore = gnr_uncore_units_ignore,
+};
+
 static const struct intel_uncore_init_fun generic_uncore_init __initconst = {
 	.cpu_init = intel_uncore_generic_uncore_cpu_init,
 	.pci_init = intel_uncore_generic_uncore_pci_init,
@@ -1865,8 +1873,12 @@ static const struct x86_cpu_id intel_uncore_match[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(METEORLAKE_L,	&mtl_uncore_init),
 	X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X,	&spr_uncore_init),
 	X86_MATCH_INTEL_FAM6_MODEL(EMERALDRAPIDS_X,	&spr_uncore_init),
+	X86_MATCH_INTEL_FAM6_MODEL(GRANITERAPIDS_X,	&gnr_uncore_init),
+	X86_MATCH_INTEL_FAM6_MODEL(GRANITERAPIDS_D,	&gnr_uncore_init),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	&snr_uncore_init),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GRACEMONT,	&adl_uncore_init),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_CRESTMONT_X,	&gnr_uncore_init),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_CRESTMONT,	&gnr_uncore_init),
 	{},
 };
 MODULE_DEVICE_TABLE(x86cpu, intel_uncore_match);
diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h
index c30fb5bb1222..4838502d89ae 100644
--- a/arch/x86/events/intel/uncore.h
+++ b/arch/x86/events/intel/uncore.h
@@ -72,9 +72,9 @@ struct intel_uncore_type {
 	unsigned single_fixed:1;
 	unsigned pair_ctr_ctl:1;
 	union {
-		unsigned *msr_offsets;
-		unsigned *pci_offsets;
-		unsigned *mmio_offsets;
+		u64 *msr_offsets;
+		u64 *pci_offsets;
+		u64 *mmio_offsets;
 	};
 	unsigned *box_ids;
 	struct event_constraint unconstrainted;
@@ -593,6 +593,7 @@ extern struct list_head pci2phy_map_head;
 extern struct pci_extra_dev *uncore_extra_pci_dev;
 extern struct event_constraint uncore_constraint_empty;
 extern int spr_uncore_units_ignore[];
+extern int gnr_uncore_units_ignore[];
 
 /* uncore_snb.c */
 int snb_uncore_pci_init(void);
@@ -634,6 +635,9 @@ void icx_uncore_mmio_init(void);
 int spr_uncore_pci_init(void);
 void spr_uncore_cpu_init(void);
 void spr_uncore_mmio_init(void);
+int gnr_uncore_pci_init(void);
+void gnr_uncore_cpu_init(void);
+void gnr_uncore_mmio_init(void);
 
 /* uncore_nhmex.c */
 void nhmex_uncore_cpu_init(void);
diff --git a/arch/x86/events/intel/uncore_discovery.c b/arch/x86/events/intel/uncore_discovery.c
index cb488e41807c..9a698a92962a 100644
--- a/arch/x86/events/intel/uncore_discovery.c
+++ b/arch/x86/events/intel/uncore_discovery.c
@@ -125,7 +125,8 @@ uncore_insert_box_info(struct uncore_unit_discovery *unit,
 		       int die, bool parsed)
 {
 	struct intel_uncore_discovery_type *type;
-	unsigned int *box_offset, *ids;
+	unsigned int *ids;
+	u64 *box_offset;
 	int i;
 
 	if (!unit->ctl || !unit->ctl_offset || !unit->ctr_offset) {
@@ -153,7 +154,7 @@ uncore_insert_box_info(struct uncore_unit_discovery *unit,
 	if (!type)
 		return;
 
-	box_offset = kcalloc(type->num_boxes + 1, sizeof(unsigned int), GFP_KERNEL);
+	box_offset = kcalloc(type->num_boxes + 1, sizeof(u64), GFP_KERNEL);
 	if (!box_offset)
 		return;
 
diff --git a/arch/x86/events/intel/uncore_discovery.h b/arch/x86/events/intel/uncore_discovery.h
index 6ee80ad3423e..22e769a81103 100644
--- a/arch/x86/events/intel/uncore_discovery.h
+++ b/arch/x86/events/intel/uncore_discovery.h
@@ -125,7 +125,7 @@ struct intel_uncore_discovery_type {
 	u8		ctr_offset;	/* Counter 0 offset */
 	u16		num_boxes;	/* number of boxes for the uncore block */
 	unsigned int	*ids;		/* Box IDs */
-	unsigned int	*box_offset;	/* Box offset */
+	u64		*box_offset;	/* Box offset */
 };
 
 bool intel_uncore_has_discovery_tables(int *ignore);
diff --git a/arch/x86/events/intel/uncore_nhmex.c b/arch/x86/events/intel/uncore_nhmex.c
index 173e2674be6e..56eea2c66cfb 100644
--- a/arch/x86/events/intel/uncore_nhmex.c
+++ b/arch/x86/events/intel/uncore_nhmex.c
@@ -306,7 +306,7 @@ static const struct attribute_group nhmex_uncore_cbox_format_group = {
 };
 
 /* msr offset for each instance of cbox */
-static unsigned nhmex_cbox_msr_offsets[] = {
+static u64 nhmex_cbox_msr_offsets[] = {
 	0x0, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, 0x240, 0x2c0,
 };
 
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index 8250f0f59c2b..a96496bef678 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -1396,6 +1396,29 @@ err:
 	return ret;
 }
 
+static int topology_gidnid_map(int nodeid, u32 gidnid)
+{
+	int i, die_id = -1;
+
+	/*
+	 * every three bits in the Node ID mapping register maps
+	 * to a particular node.
+	 */
+	for (i = 0; i < 8; i++) {
+		if (nodeid == GIDNIDMAP(gidnid, i)) {
+			if (topology_max_die_per_package() > 1)
+				die_id = i;
+			else
+				die_id = topology_phys_to_logical_pkg(i);
+			if (die_id < 0)
+				die_id = -ENODEV;
+			break;
+		}
+	}
+
+	return die_id;
+}
+
 /*
  * build pci bus to socket mapping
  */
@@ -1435,22 +1458,7 @@ static int snbep_pci2phy_map_init(int devid, int nodeid_loc, int idmap_loc, bool
 				break;
 			}
 
-			/*
-			 * every three bits in the Node ID mapping register maps
-			 * to a particular node.
-			 */
-			for (i = 0; i < 8; i++) {
-				if (nodeid == GIDNIDMAP(config, i)) {
-					if (topology_max_die_per_package() > 1)
-						die_id = i;
-					else
-						die_id = topology_phys_to_logical_pkg(i);
-					if (die_id < 0)
-						die_id = -ENODEV;
-					map->pbus_to_dieid[bus] = die_id;
-					break;
-				}
-			}
+			map->pbus_to_dieid[bus] = topology_gidnid_map(nodeid, config);
 			raw_spin_unlock(&pci2phy_map_lock);
 		} else {
 			segment = pci_domain_nr(ubox_dev->bus);
@@ -5278,7 +5286,7 @@ void snr_uncore_mmio_init(void)
 
 /* ICX uncore support */
 
-static unsigned icx_cha_msr_offsets[] = {
+static u64 icx_cha_msr_offsets[] = {
 	0x2a0, 0x2ae, 0x2bc, 0x2ca, 0x2d8, 0x2e6, 0x2f4, 0x302, 0x310,
 	0x31e, 0x32c, 0x33a, 0x348, 0x356, 0x364, 0x372, 0x380, 0x38e,
 	0x3aa, 0x3b8, 0x3c6, 0x3d4, 0x3e2, 0x3f0, 0x3fe, 0x40c, 0x41a,
@@ -5326,7 +5334,7 @@ static struct intel_uncore_type icx_uncore_chabox = {
 	.format_group		= &snr_uncore_chabox_format_group,
 };
 
-static unsigned icx_msr_offsets[] = {
+static u64 icx_msr_offsets[] = {
 	0x0, 0x20, 0x40, 0x90, 0xb0, 0xd0,
 };
 
@@ -5596,7 +5604,7 @@ static int discover_upi_topology(struct intel_uncore_type *type, int ubox_did, i
 	struct pci_dev *ubox = NULL;
 	struct pci_dev *dev = NULL;
 	u32 nid, gid;
-	int i, idx, ret = -EPERM;
+	int idx, lgc_pkg, ret = -EPERM;
 	struct intel_uncore_topology *upi;
 	unsigned int devfn;
 
@@ -5611,20 +5619,21 @@ static int discover_upi_topology(struct intel_uncore_type *type, int ubox_did, i
 			break;
 		}
 
-		for (i = 0; i < 8; i++) {
-			if (nid != GIDNIDMAP(gid, i))
-				continue;
-			for (idx = 0; idx < type->num_boxes; idx++) {
-				upi = &type->topology[nid][idx];
-				devfn = PCI_DEVFN(dev_link0 + idx, ICX_UPI_REGS_ADDR_FUNCTION);
-				dev = pci_get_domain_bus_and_slot(pci_domain_nr(ubox->bus),
-								  ubox->bus->number,
-								  devfn);
-				if (dev) {
-					ret = upi_fill_topology(dev, upi, idx);
-					if (ret)
-						goto err;
-				}
+		lgc_pkg = topology_gidnid_map(nid, gid);
+		if (lgc_pkg < 0) {
+			ret = -EPERM;
+			goto err;
+		}
+		for (idx = 0; idx < type->num_boxes; idx++) {
+			upi = &type->topology[lgc_pkg][idx];
+			devfn = PCI_DEVFN(dev_link0 + idx, ICX_UPI_REGS_ADDR_FUNCTION);
+			dev = pci_get_domain_bus_and_slot(pci_domain_nr(ubox->bus),
+							  ubox->bus->number,
+							  devfn);
+			if (dev) {
+				ret = upi_fill_topology(dev, upi, idx);
+				if (ret)
+					goto err;
 			}
 		}
 	}
@@ -6079,13 +6088,16 @@ static struct uncore_event_desc spr_uncore_imc_events[] = {
 	{ /* end: all zeroes */ },
 };
 
+#define SPR_UNCORE_MMIO_COMMON_FORMAT()				\
+	SPR_UNCORE_COMMON_FORMAT(),				\
+	.ops			= &spr_uncore_mmio_ops
+
 static struct intel_uncore_type spr_uncore_imc = {
-	SPR_UNCORE_COMMON_FORMAT(),
+	SPR_UNCORE_MMIO_COMMON_FORMAT(),
 	.name			= "imc",
 	.fixed_ctr_bits		= 48,
 	.fixed_ctr		= SNR_IMC_MMIO_PMON_FIXED_CTR,
 	.fixed_ctl		= SNR_IMC_MMIO_PMON_FIXED_CTL,
-	.ops			= &spr_uncore_mmio_ops,
 	.event_descs		= spr_uncore_imc_events,
 };
 
@@ -6181,7 +6193,7 @@ static struct intel_uncore_type *spr_uncores[UNCORE_SPR_NUM_UNCORE_TYPES] = {
  */
 #define SPR_UNCORE_UPI_NUM_BOXES	4
 
-static unsigned int spr_upi_pci_offsets[SPR_UNCORE_UPI_NUM_BOXES] = {
+static u64 spr_upi_pci_offsets[SPR_UNCORE_UPI_NUM_BOXES] = {
 	0, 0x8000, 0x10000, 0x18000
 };
 
@@ -6412,7 +6424,8 @@ static void uncore_type_customized_copy(struct intel_uncore_type *to_type,
 
 static struct intel_uncore_type **
 uncore_get_uncores(enum uncore_access_type type_id, int num_extra,
-		    struct intel_uncore_type **extra)
+		   struct intel_uncore_type **extra, int max_num_types,
+		   struct intel_uncore_type **uncores)
 {
 	struct intel_uncore_type **types, **start_types;
 	int i;
@@ -6421,9 +6434,9 @@ uncore_get_uncores(enum uncore_access_type type_id, int num_extra,
 
 	/* Only copy the customized features */
 	for (; *types; types++) {
-		if ((*types)->type_id >= UNCORE_SPR_NUM_UNCORE_TYPES)
+		if ((*types)->type_id >= max_num_types)
 			continue;
-		uncore_type_customized_copy(*types, spr_uncores[(*types)->type_id]);
+		uncore_type_customized_copy(*types, uncores[(*types)->type_id]);
 	}
 
 	for (i = 0; i < num_extra; i++, types++)
@@ -6470,7 +6483,9 @@ void spr_uncore_cpu_init(void)
 
 	uncore_msr_uncores = uncore_get_uncores(UNCORE_ACCESS_MSR,
 						UNCORE_SPR_MSR_EXTRA_UNCORES,
-						spr_msr_uncores);
+						spr_msr_uncores,
+						UNCORE_SPR_NUM_UNCORE_TYPES,
+						spr_uncores);
 
 	type = uncore_find_type_by_id(uncore_msr_uncores, UNCORE_SPR_CHA);
 	if (type) {
@@ -6552,7 +6567,9 @@ int spr_uncore_pci_init(void)
 	spr_update_device_location(UNCORE_SPR_M3UPI);
 	uncore_pci_uncores = uncore_get_uncores(UNCORE_ACCESS_PCI,
 						UNCORE_SPR_PCI_EXTRA_UNCORES,
-						spr_pci_uncores);
+						spr_pci_uncores,
+						UNCORE_SPR_NUM_UNCORE_TYPES,
+						spr_uncores);
 	return 0;
 }
 
@@ -6560,15 +6577,116 @@ void spr_uncore_mmio_init(void)
 {
 	int ret = snbep_pci2phy_map_init(0x3250, SKX_CPUNODEID, SKX_GIDNIDMAP, true);
 
-	if (ret)
-		uncore_mmio_uncores = uncore_get_uncores(UNCORE_ACCESS_MMIO, 0, NULL);
-	else {
+	if (ret) {
+		uncore_mmio_uncores = uncore_get_uncores(UNCORE_ACCESS_MMIO, 0, NULL,
+							 UNCORE_SPR_NUM_UNCORE_TYPES,
+							 spr_uncores);
+	} else {
 		uncore_mmio_uncores = uncore_get_uncores(UNCORE_ACCESS_MMIO,
 							 UNCORE_SPR_MMIO_EXTRA_UNCORES,
-							 spr_mmio_uncores);
+							 spr_mmio_uncores,
+							 UNCORE_SPR_NUM_UNCORE_TYPES,
+							 spr_uncores);
 
 		spr_uncore_imc_free_running.num_boxes = uncore_type_max_boxes(uncore_mmio_uncores, UNCORE_SPR_IMC) / 2;
 	}
 }
 
 /* end of SPR uncore support */
+
+/* GNR uncore support */
+
+#define UNCORE_GNR_NUM_UNCORE_TYPES	23
+#define UNCORE_GNR_TYPE_15		15
+#define UNCORE_GNR_B2UPI		18
+#define UNCORE_GNR_TYPE_21		21
+#define UNCORE_GNR_TYPE_22		22
+
+int gnr_uncore_units_ignore[] = {
+	UNCORE_SPR_UPI,
+	UNCORE_GNR_TYPE_15,
+	UNCORE_GNR_B2UPI,
+	UNCORE_GNR_TYPE_21,
+	UNCORE_GNR_TYPE_22,
+	UNCORE_IGNORE_END
+};
+
+static struct intel_uncore_type gnr_uncore_ubox = {
+	.name			= "ubox",
+	.attr_update		= uncore_alias_groups,
+};
+
+static struct intel_uncore_type gnr_uncore_b2cmi = {
+	SPR_UNCORE_PCI_COMMON_FORMAT(),
+	.name			= "b2cmi",
+};
+
+static struct intel_uncore_type gnr_uncore_b2cxl = {
+	SPR_UNCORE_MMIO_COMMON_FORMAT(),
+	.name			= "b2cxl",
+};
+
+static struct intel_uncore_type gnr_uncore_mdf_sbo = {
+	.name			= "mdf_sbo",
+	.attr_update		= uncore_alias_groups,
+};
+
+static struct intel_uncore_type *gnr_uncores[UNCORE_GNR_NUM_UNCORE_TYPES] = {
+	&spr_uncore_chabox,
+	&spr_uncore_iio,
+	&spr_uncore_irp,
+	NULL,
+	&spr_uncore_pcu,
+	&gnr_uncore_ubox,
+	&spr_uncore_imc,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	&gnr_uncore_b2cmi,
+	&gnr_uncore_b2cxl,
+	NULL,
+	NULL,
+	&gnr_uncore_mdf_sbo,
+	NULL,
+	NULL,
+};
+
+static struct freerunning_counters gnr_iio_freerunning[] = {
+	[SPR_IIO_MSR_IOCLK]	= { 0x290e, 0x01, 0x10, 1, 48 },
+	[SPR_IIO_MSR_BW_IN]	= { 0x360e, 0x10, 0x80, 8, 48 },
+	[SPR_IIO_MSR_BW_OUT]	= { 0x2e0e, 0x10, 0x80, 8, 48 },
+};
+
+void gnr_uncore_cpu_init(void)
+{
+	uncore_msr_uncores = uncore_get_uncores(UNCORE_ACCESS_MSR,
+						UNCORE_SPR_MSR_EXTRA_UNCORES,
+						spr_msr_uncores,
+						UNCORE_GNR_NUM_UNCORE_TYPES,
+						gnr_uncores);
+	spr_uncore_iio_free_running.num_boxes = uncore_type_max_boxes(uncore_msr_uncores, UNCORE_SPR_IIO);
+	spr_uncore_iio_free_running.freerunning = gnr_iio_freerunning;
+}
+
+int gnr_uncore_pci_init(void)
+{
+	uncore_pci_uncores = uncore_get_uncores(UNCORE_ACCESS_PCI, 0, NULL,
+						UNCORE_GNR_NUM_UNCORE_TYPES,
+						gnr_uncores);
+	return 0;
+}
+
+void gnr_uncore_mmio_init(void)
+{
+	uncore_mmio_uncores = uncore_get_uncores(UNCORE_ACCESS_MMIO, 0, NULL,
+						 UNCORE_GNR_NUM_UNCORE_TYPES,
+						 gnr_uncores);
+}
+
+/* end of GNR uncore support */
diff --git a/arch/x86/events/perf_event.h b/arch/x86/events/perf_event.h
index 53dd5d495ba6..fb56518356ec 100644
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -110,6 +110,11 @@ static inline bool is_topdown_event(struct perf_event *event)
 	return is_metric_event(event) || is_slots_event(event);
 }
 
+static inline bool is_branch_counters_group(struct perf_event *event)
+{
+	return event->group_leader->hw.flags & PERF_X86_EVENT_BRANCH_COUNTERS;
+}
+
 struct amd_nb {
 	int nb_id;  /* NorthBridge id */
 	int refcnt; /* reference count */
@@ -283,6 +288,7 @@ struct cpu_hw_events {
 	int				lbr_pebs_users;
 	struct perf_branch_stack	lbr_stack;
 	struct perf_branch_entry	lbr_entries[MAX_LBR_ENTRIES];
+	u64				lbr_counters[MAX_LBR_ENTRIES]; /* branch stack extra */
 	union {
 		struct er_account		*lbr_sel;
 		struct er_account		*lbr_ctl;
@@ -888,6 +894,7 @@ struct x86_pmu {
 	unsigned int	lbr_mispred:1;
 	unsigned int	lbr_timed_lbr:1;
 	unsigned int	lbr_br_type:1;
+	unsigned int	lbr_counters:4;
 
 	void		(*lbr_reset)(void);
 	void		(*lbr_read)(struct cpu_hw_events *cpuc);
@@ -1012,6 +1019,7 @@ do {									\
 #define PMU_FL_INSTR_LATENCY	0x80 /* Support Instruction Latency in PEBS Memory Info Record */
 #define PMU_FL_MEM_LOADS_AUX	0x100 /* Require an auxiliary event for the complete memory info */
 #define PMU_FL_RETIRE_LATENCY	0x200 /* Support Retire Latency in PEBS */
+#define PMU_FL_BR_CNTR		0x400 /* Support branch counter logging */
 
 #define EVENT_VAR(_id)  event_attr_##_id
 #define EVENT_PTR(_id) &event_attr_##_id.attr.attr
@@ -1552,6 +1560,10 @@ void intel_pmu_store_pebs_lbrs(struct lbr_entry *lbr);
 
 void intel_ds_init(void);
 
+void intel_pmu_lbr_save_brstack(struct perf_sample_data *data,
+				struct cpu_hw_events *cpuc,
+				struct perf_event *event);
+
 void intel_pmu_lbr_swap_task_ctx(struct perf_event_pmu_context *prev_epc,
 				 struct perf_event_pmu_context *next_epc);
 
diff --git a/arch/x86/events/perf_event_flags.h b/arch/x86/events/perf_event_flags.h
index 1dc19b9b4426..6c977c19f2cd 100644
--- a/arch/x86/events/perf_event_flags.h
+++ b/arch/x86/events/perf_event_flags.h
@@ -20,3 +20,5 @@ PERF_ARCH(TOPDOWN,		0x04000) /* Count Topdown slots/metrics events */
 PERF_ARCH(PEBS_STLAT,		0x08000) /* st+stlat data address sampling */
 PERF_ARCH(AMD_BRS,		0x10000) /* AMD Branch Sampling */
 PERF_ARCH(PEBS_LAT_HYBRID,	0x20000) /* ld and st lat for hybrid */
+PERF_ARCH(NEEDS_BRANCH_STACK,	0x40000) /* require branch stack setup */
+PERF_ARCH(BRANCH_COUNTERS,	0x80000) /* logs the counters in the extra space of each branch */
diff --git a/arch/x86/hyperv/hv_apic.c b/arch/x86/hyperv/hv_apic.c
index 97bfe5f0531f..5fc45543e955 100644
--- a/arch/x86/hyperv/hv_apic.c
+++ b/arch/x86/hyperv/hv_apic.c
@@ -209,7 +209,7 @@ static bool __send_ipi_mask(const struct cpumask *mask, int vector,
 
 		/*
 		 * This particular version of the IPI hypercall can
-		 * only target upto 64 CPUs.
+		 * only target up to 64 CPUs.
 		 */
 		if (vcpu >= 64)
 			goto do_ex_hypercall;
diff --git a/arch/x86/hyperv/hv_vtl.c b/arch/x86/hyperv/hv_vtl.c
index 96e6c51515f5..cf1b78cb2d04 100644
--- a/arch/x86/hyperv/hv_vtl.c
+++ b/arch/x86/hyperv/hv_vtl.c
@@ -16,6 +16,11 @@
 extern struct boot_params boot_params;
 static struct real_mode_header hv_vtl_real_mode_header;
 
+static bool __init hv_vtl_msi_ext_dest_id(void)
+{
+	return true;
+}
+
 void __init hv_vtl_init_platform(void)
 {
 	pr_info("Linux runs in Hyper-V Virtual Trust Level\n");
@@ -38,6 +43,8 @@ void __init hv_vtl_init_platform(void)
 	x86_platform.legacy.warm_reset = 0;
 	x86_platform.legacy.reserve_bios_regions = 0;
 	x86_platform.legacy.devices.pnpbios = 0;
+
+	x86_init.hyper.msi_ext_dest_id = hv_vtl_msi_ext_dest_id;
 }
 
 static inline u64 hv_vtl_system_desc_base(struct ldttss_desc *desc)
diff --git a/arch/x86/hyperv/irqdomain.c b/arch/x86/hyperv/irqdomain.c
index 42c70d28ef27..3215a4a07408 100644
--- a/arch/x86/hyperv/irqdomain.c
+++ b/arch/x86/hyperv/irqdomain.c
@@ -212,7 +212,7 @@ static void hv_irq_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 		 * This interrupt is already mapped. Let's unmap first.
 		 *
 		 * We don't use retarget interrupt hypercalls here because
-		 * Microsoft Hypervisor doens't allow root to change the vector
+		 * Microsoft Hypervisor doesn't allow root to change the vector
 		 * or specify VPs outside of the set that is initially used
 		 * during mapping.
 		 */
diff --git a/arch/x86/hyperv/ivm.c b/arch/x86/hyperv/ivm.c
index 02e55237d919..768d73de0d09 100644
--- a/arch/x86/hyperv/ivm.c
+++ b/arch/x86/hyperv/ivm.c
@@ -15,6 +15,7 @@
 #include <asm/io.h>
 #include <asm/coco.h>
 #include <asm/mem_encrypt.h>
+#include <asm/set_memory.h>
 #include <asm/mshyperv.h>
 #include <asm/hypervisor.h>
 #include <asm/mtrr.h>
@@ -144,7 +145,7 @@ void __noreturn hv_ghcb_terminate(unsigned int set, unsigned int reason)
 	/* Tell the hypervisor what went wrong. */
 	val |= GHCB_SEV_TERM_REASON(set, reason);
 
-	/* Request Guest Termination from Hypvervisor */
+	/* Request Guest Termination from Hypervisor */
 	wr_ghcb_msr(val);
 	VMGEXIT();
 
@@ -503,6 +504,31 @@ static int hv_mark_gpa_visibility(u16 count, const u64 pfn[],
 }
 
 /*
+ * When transitioning memory between encrypted and decrypted, the caller
+ * of set_memory_encrypted() or set_memory_decrypted() is responsible for
+ * ensuring that the memory isn't in use and isn't referenced while the
+ * transition is in progress.  The transition has multiple steps, and the
+ * memory is in an inconsistent state until all steps are complete. A
+ * reference while the state is inconsistent could result in an exception
+ * that can't be cleanly fixed up.
+ *
+ * But the Linux kernel load_unaligned_zeropad() mechanism could cause a
+ * stray reference that can't be prevented by the caller, so Linux has
+ * specific code to handle this case. But when the #VC and #VE exceptions
+ * routed to a paravisor, the specific code doesn't work. To avoid this
+ * problem, mark the pages as "not present" while the transition is in
+ * progress. If load_unaligned_zeropad() causes a stray reference, a normal
+ * page fault is generated instead of #VC or #VE, and the page-fault-based
+ * handlers for load_unaligned_zeropad() resolve the reference.  When the
+ * transition is complete, hv_vtom_set_host_visibility() marks the pages
+ * as "present" again.
+ */
+static bool hv_vtom_clear_present(unsigned long kbuffer, int pagecount, bool enc)
+{
+	return !set_memory_np(kbuffer, pagecount);
+}
+
+/*
  * hv_vtom_set_host_visibility - Set specified memory visible to host.
  *
  * In Isolation VM, all guest memory is encrypted from host and guest
@@ -515,16 +541,28 @@ static bool hv_vtom_set_host_visibility(unsigned long kbuffer, int pagecount, bo
 	enum hv_mem_host_visibility visibility = enc ?
 			VMBUS_PAGE_NOT_VISIBLE : VMBUS_PAGE_VISIBLE_READ_WRITE;
 	u64 *pfn_array;
+	phys_addr_t paddr;
+	void *vaddr;
 	int ret = 0;
 	bool result = true;
 	int i, pfn;
 
 	pfn_array = kmalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL);
-	if (!pfn_array)
-		return false;
+	if (!pfn_array) {
+		result = false;
+		goto err_set_memory_p;
+	}
 
 	for (i = 0, pfn = 0; i < pagecount; i++) {
-		pfn_array[pfn] = virt_to_hvpfn((void *)kbuffer + i * HV_HYP_PAGE_SIZE);
+		/*
+		 * Use slow_virt_to_phys() because the PRESENT bit has been
+		 * temporarily cleared in the PTEs.  slow_virt_to_phys() works
+		 * without the PRESENT bit while virt_to_hvpfn() or similar
+		 * does not.
+		 */
+		vaddr = (void *)kbuffer + (i * HV_HYP_PAGE_SIZE);
+		paddr = slow_virt_to_phys(vaddr);
+		pfn_array[pfn] = paddr >> HV_HYP_PAGE_SHIFT;
 		pfn++;
 
 		if (pfn == HV_MAX_MODIFY_GPA_REP_COUNT || i == pagecount - 1) {
@@ -538,14 +576,30 @@ static bool hv_vtom_set_host_visibility(unsigned long kbuffer, int pagecount, bo
 		}
 	}
 
- err_free_pfn_array:
+err_free_pfn_array:
 	kfree(pfn_array);
+
+err_set_memory_p:
+	/*
+	 * Set the PTE PRESENT bits again to revert what hv_vtom_clear_present()
+	 * did. Do this even if there is an error earlier in this function in
+	 * order to avoid leaving the memory range in a "broken" state. Setting
+	 * the PRESENT bits shouldn't fail, but return an error if it does.
+	 */
+	if (set_memory_p(kbuffer, pagecount))
+		result = false;
+
 	return result;
 }
 
 static bool hv_vtom_tlb_flush_required(bool private)
 {
-	return true;
+	/*
+	 * Since hv_vtom_clear_present() marks the PTEs as "not present"
+	 * and flushes the TLB, they can't be in the TLB. That makes the
+	 * flush controlled by this function redundant, so return "false".
+	 */
+	return false;
 }
 
 static bool hv_vtom_cache_flush_required(void)
@@ -608,6 +662,7 @@ void __init hv_vtom_init(void)
 	x86_platform.hyper.is_private_mmio = hv_is_private_mmio;
 	x86_platform.guest.enc_cache_flush_required = hv_vtom_cache_flush_required;
 	x86_platform.guest.enc_tlb_flush_required = hv_vtom_tlb_flush_required;
+	x86_platform.guest.enc_status_change_prepare = hv_vtom_clear_present;
 	x86_platform.guest.enc_status_change_finish = hv_vtom_set_host_visibility;
 
 	/* Set WB as the default cache mode. */
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 65f79092c9d9..fcd20c6dc7f9 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -10,6 +10,9 @@
 
 #define ALT_FLAG_NOT		(1 << 0)
 #define ALT_NOT(feature)	((ALT_FLAG_NOT << ALT_FLAGS_SHIFT) | (feature))
+#define ALT_FLAG_DIRECT_CALL	(1 << 1)
+#define ALT_DIRECT_CALL(feature) ((ALT_FLAG_DIRECT_CALL << ALT_FLAGS_SHIFT) | (feature))
+#define ALT_CALL_ALWAYS		ALT_DIRECT_CALL(X86_FEATURE_ALWAYS)
 
 #ifndef __ASSEMBLY__
 
@@ -86,6 +89,8 @@ struct alt_instr {
 	u8  replacementlen;	/* length of new instruction */
 } __packed;
 
+extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
+
 /*
  * Debug flag that can be tested to see whether alternative
  * instructions were patched in already:
@@ -101,11 +106,10 @@ extern void apply_fineibt(s32 *start_retpoline, s32 *end_retpoine,
 			  s32 *start_cfi, s32 *end_cfi);
 
 struct module;
-struct paravirt_patch_site;
 
 struct callthunk_sites {
 	s32				*call_start, *call_end;
-	struct paravirt_patch_site	*pv_start, *pv_end;
+	struct alt_instr		*alt_start, *alt_end;
 };
 
 #ifdef CONFIG_CALL_THUNKS
@@ -150,6 +154,8 @@ static inline int alternatives_text_reserved(void *start, void *end)
 }
 #endif	/* CONFIG_SMP */
 
+#define ALT_CALL_INSTR		"call BUG_func"
+
 #define b_replacement(num)	"664"#num
 #define e_replacement(num)	"665"#num
 
@@ -330,6 +336,22 @@ static inline int alternatives_text_reserved(void *start, void *end)
  */
 #define ASM_NO_INPUT_CLOBBER(clbr...) "i" (0) : clbr
 
+/* Macro for creating assembler functions avoiding any C magic. */
+#define DEFINE_ASM_FUNC(func, instr, sec)		\
+	asm (".pushsection " #sec ", \"ax\"\n"		\
+	     ".global " #func "\n\t"			\
+	     ".type " #func ", @function\n\t"		\
+	     ASM_FUNC_ALIGN "\n"			\
+	     #func ":\n\t"				\
+	     ASM_ENDBR					\
+	     instr "\n\t"				\
+	     ASM_RET					\
+	     ".size " #func ", . - " #func "\n\t"	\
+	     ".popsection")
+
+void BUG_func(void);
+void nop_func(void);
+
 #else /* __ASSEMBLY__ */
 
 #ifdef CONFIG_SMP
@@ -370,6 +392,10 @@ static inline int alternatives_text_reserved(void *start, void *end)
 	.byte \alt_len
 .endm
 
+.macro ALT_CALL_INSTR
+	call BUG_func
+.endm
+
 /*
  * Define an alternative between two instructions. If @feature is
  * present, early code in apply_alternatives() replaces @oldinstr with
diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h
index ed0eaf65c437..5c37944c8a5e 100644
--- a/arch/x86/include/asm/amd_nb.h
+++ b/arch/x86/include/asm/amd_nb.h
@@ -104,7 +104,7 @@ static inline bool amd_gart_present(void)
 	if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
 		return false;
 
-	/* GART present only on Fam15h, upto model 0fh */
+	/* GART present only on Fam15h, up to model 0fh */
 	if (boot_cpu_data.x86 == 0xf || boot_cpu_data.x86 == 0x10 ||
 	    (boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model < 0x10))
 		return true;
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index d21f48f1c242..9d159b771dc8 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -272,8 +272,6 @@ struct apic {
 	void	(*send_IPI_all)(int vector);
 	void	(*send_IPI_self)(int vector);
 
-	enum apic_delivery_modes delivery_mode;
-
 	u32	disable_esr		: 1,
 		dest_mode_logical	: 1,
 		x2apic_set_max_apicid	: 1,
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 4b125e5b3187..094106b6a538 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -20,6 +20,13 @@
  */
 #define IO_APIC_SLOT_SIZE		1024
 
+#define APIC_DELIVERY_MODE_FIXED	0
+#define APIC_DELIVERY_MODE_LOWESTPRIO	1
+#define APIC_DELIVERY_MODE_SMI		2
+#define APIC_DELIVERY_MODE_NMI		4
+#define APIC_DELIVERY_MODE_INIT		5
+#define APIC_DELIVERY_MODE_EXTINT	7
+
 #define	APIC_ID		0x20
 
 #define	APIC_LVR	0x30
@@ -165,279 +172,10 @@
 #define APIC_CPUID(apicid)	((apicid) & XAPIC_DEST_CPUS_MASK)
 #define NUM_APIC_CLUSTERS	((BAD_APICID + 1) >> XAPIC_DEST_CPUS_SHIFT)
 
-#ifndef __ASSEMBLY__
-/*
- * the local APIC register structure, memory mapped. Not terribly well
- * tested, but we might eventually use this one in the future - the
- * problem why we cannot use it right now is the P5 APIC, it has an
- * errata which cannot take 8-bit reads and writes, only 32-bit ones ...
- */
-#define u32 unsigned int
-
-struct local_apic {
-
-/*000*/	struct { u32 __reserved[4]; } __reserved_01;
-
-/*010*/	struct { u32 __reserved[4]; } __reserved_02;
-
-/*020*/	struct { /* APIC ID Register */
-		u32   __reserved_1	: 24,
-			phys_apic_id	:  4,
-			__reserved_2	:  4;
-		u32 __reserved[3];
-	} id;
-
-/*030*/	const
-	struct { /* APIC Version Register */
-		u32   version		:  8,
-			__reserved_1	:  8,
-			max_lvt		:  8,
-			__reserved_2	:  8;
-		u32 __reserved[3];
-	} version;
-
-/*040*/	struct { u32 __reserved[4]; } __reserved_03;
-
-/*050*/	struct { u32 __reserved[4]; } __reserved_04;
-
-/*060*/	struct { u32 __reserved[4]; } __reserved_05;
-
-/*070*/	struct { u32 __reserved[4]; } __reserved_06;
-
-/*080*/	struct { /* Task Priority Register */
-		u32   priority	:  8,
-			__reserved_1	: 24;
-		u32 __reserved_2[3];
-	} tpr;
-
-/*090*/	const
-	struct { /* Arbitration Priority Register */
-		u32   priority	:  8,
-			__reserved_1	: 24;
-		u32 __reserved_2[3];
-	} apr;
-
-/*0A0*/	const
-	struct { /* Processor Priority Register */
-		u32   priority	:  8,
-			__reserved_1	: 24;
-		u32 __reserved_2[3];
-	} ppr;
-
-/*0B0*/	struct { /* End Of Interrupt Register */
-		u32   eoi;
-		u32 __reserved[3];
-	} eoi;
-
-/*0C0*/	struct { u32 __reserved[4]; } __reserved_07;
-
-/*0D0*/	struct { /* Logical Destination Register */
-		u32   __reserved_1	: 24,
-			logical_dest	:  8;
-		u32 __reserved_2[3];
-	} ldr;
-
-/*0E0*/	struct { /* Destination Format Register */
-		u32   __reserved_1	: 28,
-			model		:  4;
-		u32 __reserved_2[3];
-	} dfr;
-
-/*0F0*/	struct { /* Spurious Interrupt Vector Register */
-		u32	spurious_vector	:  8,
-			apic_enabled	:  1,
-			focus_cpu	:  1,
-			__reserved_2	: 22;
-		u32 __reserved_3[3];
-	} svr;
-
-/*100*/	struct { /* In Service Register */
-/*170*/		u32 bitfield;
-		u32 __reserved[3];
-	} isr [8];
-
-/*180*/	struct { /* Trigger Mode Register */
-/*1F0*/		u32 bitfield;
-		u32 __reserved[3];
-	} tmr [8];
-
-/*200*/	struct { /* Interrupt Request Register */
-/*270*/		u32 bitfield;
-		u32 __reserved[3];
-	} irr [8];
-
-/*280*/	union { /* Error Status Register */
-		struct {
-			u32   send_cs_error			:  1,
-				receive_cs_error		:  1,
-				send_accept_error		:  1,
-				receive_accept_error		:  1,
-				__reserved_1			:  1,
-				send_illegal_vector		:  1,
-				receive_illegal_vector		:  1,
-				illegal_register_address	:  1,
-				__reserved_2			: 24;
-			u32 __reserved_3[3];
-		} error_bits;
-		struct {
-			u32 errors;
-			u32 __reserved_3[3];
-		} all_errors;
-	} esr;
-
-/*290*/	struct { u32 __reserved[4]; } __reserved_08;
-
-/*2A0*/	struct { u32 __reserved[4]; } __reserved_09;
-
-/*2B0*/	struct { u32 __reserved[4]; } __reserved_10;
-
-/*2C0*/	struct { u32 __reserved[4]; } __reserved_11;
-
-/*2D0*/	struct { u32 __reserved[4]; } __reserved_12;
-
-/*2E0*/	struct { u32 __reserved[4]; } __reserved_13;
-
-/*2F0*/	struct { u32 __reserved[4]; } __reserved_14;
-
-/*300*/	struct { /* Interrupt Command Register 1 */
-		u32   vector			:  8,
-			delivery_mode		:  3,
-			destination_mode	:  1,
-			delivery_status		:  1,
-			__reserved_1		:  1,
-			level			:  1,
-			trigger			:  1,
-			__reserved_2		:  2,
-			shorthand		:  2,
-			__reserved_3		:  12;
-		u32 __reserved_4[3];
-	} icr1;
-
-/*310*/	struct { /* Interrupt Command Register 2 */
-		union {
-			u32   __reserved_1	: 24,
-				phys_dest	:  4,
-				__reserved_2	:  4;
-			u32   __reserved_3	: 24,
-				logical_dest	:  8;
-		} dest;
-		u32 __reserved_4[3];
-	} icr2;
-
-/*320*/	struct { /* LVT - Timer */
-		u32   vector		:  8,
-			__reserved_1	:  4,
-			delivery_status	:  1,
-			__reserved_2	:  3,
-			mask		:  1,
-			timer_mode	:  1,
-			__reserved_3	: 14;
-		u32 __reserved_4[3];
-	} lvt_timer;
-
-/*330*/	struct { /* LVT - Thermal Sensor */
-		u32  vector		:  8,
-			delivery_mode	:  3,
-			__reserved_1	:  1,
-			delivery_status	:  1,
-			__reserved_2	:  3,
-			mask		:  1,
-			__reserved_3	: 15;
-		u32 __reserved_4[3];
-	} lvt_thermal;
-
-/*340*/	struct { /* LVT - Performance Counter */
-		u32   vector		:  8,
-			delivery_mode	:  3,
-			__reserved_1	:  1,
-			delivery_status	:  1,
-			__reserved_2	:  3,
-			mask		:  1,
-			__reserved_3	: 15;
-		u32 __reserved_4[3];
-	} lvt_pc;
-
-/*350*/	struct { /* LVT - LINT0 */
-		u32   vector		:  8,
-			delivery_mode	:  3,
-			__reserved_1	:  1,
-			delivery_status	:  1,
-			polarity	:  1,
-			remote_irr	:  1,
-			trigger		:  1,
-			mask		:  1,
-			__reserved_2	: 15;
-		u32 __reserved_3[3];
-	} lvt_lint0;
-
-/*360*/	struct { /* LVT - LINT1 */
-		u32   vector		:  8,
-			delivery_mode	:  3,
-			__reserved_1	:  1,
-			delivery_status	:  1,
-			polarity	:  1,
-			remote_irr	:  1,
-			trigger		:  1,
-			mask		:  1,
-			__reserved_2	: 15;
-		u32 __reserved_3[3];
-	} lvt_lint1;
-
-/*370*/	struct { /* LVT - Error */
-		u32   vector		:  8,
-			__reserved_1	:  4,
-			delivery_status	:  1,
-			__reserved_2	:  3,
-			mask		:  1,
-			__reserved_3	: 15;
-		u32 __reserved_4[3];
-	} lvt_error;
-
-/*380*/	struct { /* Timer Initial Count Register */
-		u32   initial_count;
-		u32 __reserved_2[3];
-	} timer_icr;
-
-/*390*/	const
-	struct { /* Timer Current Count Register */
-		u32   curr_count;
-		u32 __reserved_2[3];
-	} timer_ccr;
-
-/*3A0*/	struct { u32 __reserved[4]; } __reserved_16;
-
-/*3B0*/	struct { u32 __reserved[4]; } __reserved_17;
-
-/*3C0*/	struct { u32 __reserved[4]; } __reserved_18;
-
-/*3D0*/	struct { u32 __reserved[4]; } __reserved_19;
-
-/*3E0*/	struct { /* Timer Divide Configuration Register */
-		u32   divisor		:  4,
-			__reserved_1	: 28;
-		u32 __reserved_2[3];
-	} timer_dcr;
-
-/*3F0*/	struct { u32 __reserved[4]; } __reserved_20;
-
-} __attribute__ ((packed));
-
-#undef u32
-
 #ifdef CONFIG_X86_32
  #define BAD_APICID 0xFFu
 #else
  #define BAD_APICID 0xFFFFu
 #endif
 
-enum apic_delivery_modes {
-	APIC_DELIVERY_MODE_FIXED	= 0,
-	APIC_DELIVERY_MODE_LOWESTPRIO   = 1,
-	APIC_DELIVERY_MODE_SMI		= 2,
-	APIC_DELIVERY_MODE_NMI		= 4,
-	APIC_DELIVERY_MODE_INIT		= 5,
-	APIC_DELIVERY_MODE_EXTINT	= 7,
-};
-
-#endif /* !__ASSEMBLY__ */
 #endif /* _ASM_X86_APICDEF_H */
diff --git a/arch/x86/include/asm/barrier.h b/arch/x86/include/asm/barrier.h
index 35389b2af88e..0216f63a366b 100644
--- a/arch/x86/include/asm/barrier.h
+++ b/arch/x86/include/asm/barrier.h
@@ -81,22 +81,4 @@ do {									\
 
 #include <asm-generic/barrier.h>
 
-/*
- * Make previous memory operations globally visible before
- * a WRMSR.
- *
- * MFENCE makes writes visible, but only affects load/store
- * instructions.  WRMSR is unfortunately not a load/store
- * instruction and is unaffected by MFENCE.  The LFENCE ensures
- * that the WRMSR is not reordered.
- *
- * Most WRMSRs are full serializing instructions themselves and
- * do not require this barrier.  This is only required for the
- * IA32_TSC_DEADLINE and X2APIC MSRs.
- */
-static inline void weak_wrmsr_fence(void)
-{
-	asm volatile("mfence; lfence" : : : "memory");
-}
-
 #endif /* _ASM_X86_BARRIER_H */
diff --git a/arch/x86/include/asm/cfi.h b/arch/x86/include/asm/cfi.h
index 58dacd90daef..7cd752557905 100644
--- a/arch/x86/include/asm/cfi.h
+++ b/arch/x86/include/asm/cfi.h
@@ -7,16 +7,140 @@
  *
  * Copyright (C) 2022 Google LLC
  */
+#include <linux/bug.h>
+#include <asm/ibt.h>
 
-#include <linux/cfi.h>
+/*
+ * An overview of the various calling conventions...
+ *
+ * Traditional:
+ *
+ * foo:
+ *   ... code here ...
+ *   ret
+ *
+ * direct caller:
+ *   call foo
+ *
+ * indirect caller:
+ *   lea foo(%rip), %r11
+ *   ...
+ *   call *%r11
+ *
+ *
+ * IBT:
+ *
+ * foo:
+ *   endbr64
+ *   ... code here ...
+ *   ret
+ *
+ * direct caller:
+ *   call foo / call foo+4
+ *
+ * indirect caller:
+ *   lea foo(%rip), %r11
+ *   ...
+ *   call *%r11
+ *
+ *
+ * kCFI:
+ *
+ * __cfi_foo:
+ *   movl $0x12345678, %eax
+ *				# 11 nops when CONFIG_CALL_PADDING
+ * foo:
+ *   endbr64			# when IBT
+ *   ... code here ...
+ *   ret
+ *
+ * direct call:
+ *   call foo			# / call foo+4 when IBT
+ *
+ * indirect call:
+ *   lea foo(%rip), %r11
+ *   ...
+ *   movl $(-0x12345678), %r10d
+ *   addl -4(%r11), %r10d	# -15 when CONFIG_CALL_PADDING
+ *   jz   1f
+ *   ud2
+ * 1:call *%r11
+ *
+ *
+ * FineIBT (builds as kCFI + CALL_PADDING + IBT + RETPOLINE and runtime patches into):
+ *
+ * __cfi_foo:
+ *   endbr64
+ *   subl 0x12345678, %r10d
+ *   jz   foo
+ *   ud2
+ *   nop
+ * foo:
+ *   osp nop3			# was endbr64
+ *   ... code here ...
+ *   ret
+ *
+ * direct caller:
+ *   call foo / call foo+4
+ *
+ * indirect caller:
+ *   lea foo(%rip), %r11
+ *   ...
+ *   movl $0x12345678, %r10d
+ *   subl $16, %r11
+ *   nop4
+ *   call *%r11
+ *
+ */
+enum cfi_mode {
+	CFI_DEFAULT,	/* FineIBT if hardware has IBT, otherwise kCFI */
+	CFI_OFF,	/* Taditional / IBT depending on .config */
+	CFI_KCFI,	/* Optionally CALL_PADDING, IBT, RETPOLINE */
+	CFI_FINEIBT,	/* see arch/x86/kernel/alternative.c */
+};
+
+extern enum cfi_mode cfi_mode;
+
+struct pt_regs;
 
 #ifdef CONFIG_CFI_CLANG
 enum bug_trap_type handle_cfi_failure(struct pt_regs *regs);
+#define __bpfcall
+extern u32 cfi_bpf_hash;
+extern u32 cfi_bpf_subprog_hash;
+
+static inline int cfi_get_offset(void)
+{
+	switch (cfi_mode) {
+	case CFI_FINEIBT:
+		return 16;
+	case CFI_KCFI:
+		if (IS_ENABLED(CONFIG_CALL_PADDING))
+			return 16;
+		return 5;
+	default:
+		return 0;
+	}
+}
+#define cfi_get_offset cfi_get_offset
+
+extern u32 cfi_get_func_hash(void *func);
+
 #else
 static inline enum bug_trap_type handle_cfi_failure(struct pt_regs *regs)
 {
 	return BUG_TRAP_TYPE_NONE;
 }
+#define cfi_bpf_hash 0U
+#define cfi_bpf_subprog_hash 0U
+static inline u32 cfi_get_func_hash(void *func)
+{
+	return 0;
+}
 #endif /* CONFIG_CFI_CLANG */
 
+#if HAS_KERNEL_IBT == 1
+#define CFI_NOSEAL(x)	asm(IBT_NOSEAL(__stringify(x)))
+#endif
+
 #endif /* _ASM_X86_CFI_H */
diff --git a/arch/x86/include/asm/coco.h b/arch/x86/include/asm/coco.h
index 6ae2d16a7613..76c310b19b11 100644
--- a/arch/x86/include/asm/coco.h
+++ b/arch/x86/include/asm/coco.h
@@ -10,13 +10,14 @@ enum cc_vendor {
 	CC_VENDOR_INTEL,
 };
 
-extern enum cc_vendor cc_vendor;
-
 #ifdef CONFIG_ARCH_HAS_CC_PLATFORM
+extern enum cc_vendor cc_vendor;
 void cc_set_mask(u64 mask);
 u64 cc_mkenc(u64 val);
 u64 cc_mkdec(u64 val);
 #else
+#define cc_vendor (CC_VENDOR_NONE)
+
 static inline u64 cc_mkenc(u64 val)
 {
 	return val;
diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index fecc4fe1d68a..f8f9a9b79395 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -23,10 +23,6 @@ static inline void prefill_possible_map(void) {}
 
 #endif /* CONFIG_SMP */
 
-struct x86_cpu {
-	struct cpu cpu;
-};
-
 #ifdef CONFIG_HOTPLUG_CPU
 extern void soft_restart_cpu(void);
 #endif
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index a26bebbdff87..a1273698fc43 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -168,7 +168,7 @@ extern void clear_cpu_cap(struct cpuinfo_x86 *c, unsigned int bit);
  */
 static __always_inline bool _static_cpu_has(u16 bit)
 {
-	asm_volatile_goto(
+	asm goto(
 		ALTERNATIVE_TERNARY("jmp 6f", %P[feature], "", "jmp %l[t_no]")
 		".pushsection .altinstr_aux,\"ax\"\n"
 		"6:\n"
diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index 4af140cf5719..2b62cdd8dd12 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -81,10 +81,8 @@
 #define X86_FEATURE_K6_MTRR		( 3*32+ 1) /* AMD K6 nonstandard MTRRs */
 #define X86_FEATURE_CYRIX_ARR		( 3*32+ 2) /* Cyrix ARRs (= MTRRs) */
 #define X86_FEATURE_CENTAUR_MCR		( 3*32+ 3) /* Centaur MCRs (= MTRRs) */
-
-/* CPU types for specific tunings: */
 #define X86_FEATURE_K8			( 3*32+ 4) /* "" Opteron, Athlon64 */
-/* FREE, was #define X86_FEATURE_K7			( 3*32+ 5) "" Athlon */
+#define X86_FEATURE_ZEN5		( 3*32+ 5) /* "" CPU based on Zen5 microarchitecture */
 #define X86_FEATURE_P3			( 3*32+ 6) /* "" P3 */
 #define X86_FEATURE_P4			( 3*32+ 7) /* "" P4 */
 #define X86_FEATURE_CONSTANT_TSC	( 3*32+ 8) /* TSC ticks at a constant rate */
@@ -97,7 +95,7 @@
 #define X86_FEATURE_SYSENTER32		( 3*32+15) /* "" sysenter in IA32 userspace */
 #define X86_FEATURE_REP_GOOD		( 3*32+16) /* REP microcode works well */
 #define X86_FEATURE_AMD_LBR_V2		( 3*32+17) /* AMD Last Branch Record Extension Version 2 */
-/* FREE, was #define X86_FEATURE_LFENCE_RDTSC		( 3*32+18) "" LFENCE synchronizes RDTSC */
+#define X86_FEATURE_CLEAR_CPU_BUF	( 3*32+18) /* "" Clear CPU buffers using VERW */
 #define X86_FEATURE_ACC_POWER		( 3*32+19) /* AMD Accumulated Power Mechanism */
 #define X86_FEATURE_NOPL		( 3*32+20) /* The NOPL (0F 1F) instructions */
 #define X86_FEATURE_ALWAYS		( 3*32+21) /* "" Always-present feature */
@@ -198,6 +196,7 @@
 #define X86_FEATURE_CAT_L3		( 7*32+ 4) /* Cache Allocation Technology L3 */
 #define X86_FEATURE_CAT_L2		( 7*32+ 5) /* Cache Allocation Technology L2 */
 #define X86_FEATURE_CDP_L3		( 7*32+ 6) /* Code and Data Prioritization L3 */
+#define X86_FEATURE_TDX_HOST_PLATFORM	( 7*32+ 7) /* Platform supports being a TDX host */
 #define X86_FEATURE_HW_PSTATE		( 7*32+ 8) /* AMD HW-PState */
 #define X86_FEATURE_PROC_FEEDBACK	( 7*32+ 9) /* AMD ProcFeedbackInterface */
 #define X86_FEATURE_XCOMPACTED		( 7*32+10) /* "" Use compacted XSTATE (XSAVES or XSAVEC) */
@@ -218,7 +217,7 @@
 #define X86_FEATURE_IBRS		( 7*32+25) /* Indirect Branch Restricted Speculation */
 #define X86_FEATURE_IBPB		( 7*32+26) /* Indirect Branch Prediction Barrier */
 #define X86_FEATURE_STIBP		( 7*32+27) /* Single Thread Indirect Branch Predictors */
-#define X86_FEATURE_ZEN			(7*32+28) /* "" CPU based on Zen microarchitecture */
+#define X86_FEATURE_ZEN			( 7*32+28) /* "" Generic flag for all Zen and newer */
 #define X86_FEATURE_L1TF_PTEINV		( 7*32+29) /* "" L1TF workaround PTE inversion */
 #define X86_FEATURE_IBRS_ENHANCED	( 7*32+30) /* Enhanced IBRS */
 #define X86_FEATURE_MSR_IA32_FEAT_CTL	( 7*32+31) /* "" MSR IA32_FEAT_CTL configured */
@@ -308,10 +307,14 @@
 #define X86_FEATURE_SMBA		(11*32+21) /* "" Slow Memory Bandwidth Allocation */
 #define X86_FEATURE_BMEC		(11*32+22) /* "" Bandwidth Monitoring Event Configuration */
 #define X86_FEATURE_USER_SHSTK		(11*32+23) /* Shadow stack support for user mode applications */
-
 #define X86_FEATURE_SRSO		(11*32+24) /* "" AMD BTB untrain RETs */
 #define X86_FEATURE_SRSO_ALIAS		(11*32+25) /* "" AMD BTB untrain RETs through aliasing */
 #define X86_FEATURE_IBPB_ON_VMEXIT	(11*32+26) /* "" Issue an IBPB only on VMEXIT */
+#define X86_FEATURE_APIC_MSRS_FENCE	(11*32+27) /* "" IA32_TSC_DEADLINE and X2APIC MSRs need fencing */
+#define X86_FEATURE_ZEN2		(11*32+28) /* "" CPU based on Zen2 microarchitecture */
+#define X86_FEATURE_ZEN3		(11*32+29) /* "" CPU based on Zen3 microarchitecture */
+#define X86_FEATURE_ZEN4		(11*32+30) /* "" CPU based on Zen4 microarchitecture */
+#define X86_FEATURE_ZEN1		(11*32+31) /* "" CPU based on Zen1 microarchitecture */
 
 /* Intel-defined CPU features, CPUID level 0x00000007:1 (EAX), word 12 */
 #define X86_FEATURE_AVX_VNNI		(12*32+ 4) /* AVX VNNI instructions */
@@ -495,6 +498,7 @@
 #define X86_BUG_EIBRS_PBRSB		X86_BUG(28) /* EIBRS is vulnerable to Post Barrier RSB Predictions */
 #define X86_BUG_SMT_RSB			X86_BUG(29) /* CPU is vulnerable to Cross-Thread Return Address Predictions */
 #define X86_BUG_GDS			X86_BUG(30) /* CPU is affected by Gather Data Sampling */
+#define X86_BUG_TDX_PW_MCE		X86_BUG(31) /* CPU may incur #MC if non-TD software does partial write to TDX private memory */
 
 /* BUG word 2 */
 #define X86_BUG_SRSO			X86_BUG(1*32 + 0) /* AMD SRSO bug */
diff --git a/arch/x86/include/asm/current.h b/arch/x86/include/asm/current.h
index a1168e7b69e5..dd4b67101bb7 100644
--- a/arch/x86/include/asm/current.h
+++ b/arch/x86/include/asm/current.h
@@ -2,6 +2,7 @@
 #ifndef _ASM_X86_CURRENT_H
 #define _ASM_X86_CURRENT_H
 
+#include <linux/build_bug.h>
 #include <linux/compiler.h>
 
 #ifndef __ASSEMBLY__
diff --git a/arch/x86/include/asm/debugreg.h b/arch/x86/include/asm/debugreg.h
index 66eb5e1ac4fb..0cec92c430cc 100644
--- a/arch/x86/include/asm/debugreg.h
+++ b/arch/x86/include/asm/debugreg.h
@@ -5,6 +5,7 @@
 #include <linux/bug.h>
 #include <linux/percpu.h>
 #include <uapi/asm/debugreg.h>
+#include <asm/cpufeature.h>
 
 DECLARE_PER_CPU(unsigned long, cpu_dr7);
 
diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h
index f7e7099af595..d440a65af8f3 100644
--- a/arch/x86/include/asm/desc_defs.h
+++ b/arch/x86/include/asm/desc_defs.h
@@ -8,6 +8,56 @@
  * archs.
  */
 
+/*
+ * Low-level interface mapping flags/field names to bits
+ */
+
+/* Flags for _DESC_S (non-system) descriptors */
+#define _DESC_ACCESSED		0x0001
+#define _DESC_DATA_WRITABLE	0x0002
+#define _DESC_CODE_READABLE	0x0002
+#define _DESC_DATA_EXPAND_DOWN	0x0004
+#define _DESC_CODE_CONFORMING	0x0004
+#define _DESC_CODE_EXECUTABLE	0x0008
+
+/* Common flags */
+#define _DESC_S			0x0010
+#define _DESC_DPL(dpl)		((dpl) << 5)
+#define _DESC_PRESENT		0x0080
+
+#define _DESC_LONG_CODE		0x2000
+#define _DESC_DB		0x4000
+#define _DESC_GRANULARITY_4K	0x8000
+
+/* System descriptors have a numeric "type" field instead of flags */
+#define _DESC_SYSTEM(code)	(code)
+
+/*
+ * High-level interface mapping intended usage to low-level combinations
+ * of flags
+ */
+
+#define _DESC_DATA		(_DESC_S | _DESC_PRESENT | _DESC_ACCESSED | \
+				 _DESC_DATA_WRITABLE)
+#define _DESC_CODE		(_DESC_S | _DESC_PRESENT | _DESC_ACCESSED | \
+				 _DESC_CODE_READABLE | _DESC_CODE_EXECUTABLE)
+
+#define DESC_DATA16		(_DESC_DATA)
+#define DESC_CODE16		(_DESC_CODE)
+
+#define DESC_DATA32		(_DESC_DATA | _DESC_GRANULARITY_4K | _DESC_DB)
+#define DESC_DATA32_BIOS	(_DESC_DATA | _DESC_DB)
+
+#define DESC_CODE32		(_DESC_CODE | _DESC_GRANULARITY_4K | _DESC_DB)
+#define DESC_CODE32_BIOS	(_DESC_CODE | _DESC_DB)
+
+#define DESC_TSS32		(_DESC_SYSTEM(9) | _DESC_PRESENT)
+
+#define DESC_DATA64		(_DESC_DATA | _DESC_GRANULARITY_4K | _DESC_DB)
+#define DESC_CODE64		(_DESC_CODE | _DESC_GRANULARITY_4K | _DESC_LONG_CODE)
+
+#define DESC_USER		(_DESC_DPL(3))
+
 #ifndef __ASSEMBLY__
 
 #include <linux/types.h>
@@ -22,19 +72,19 @@ struct desc_struct {
 
 #define GDT_ENTRY_INIT(flags, base, limit)			\
 	{							\
-		.limit0		= (u16) (limit),		\
-		.limit1		= ((limit) >> 16) & 0x0F,	\
-		.base0		= (u16) (base),			\
-		.base1		= ((base) >> 16) & 0xFF,	\
-		.base2		= ((base) >> 24) & 0xFF,	\
-		.type		= (flags & 0x0f),		\
-		.s		= (flags >> 4) & 0x01,		\
-		.dpl		= (flags >> 5) & 0x03,		\
-		.p		= (flags >> 7) & 0x01,		\
-		.avl		= (flags >> 12) & 0x01,		\
-		.l		= (flags >> 13) & 0x01,		\
-		.d		= (flags >> 14) & 0x01,		\
-		.g		= (flags >> 15) & 0x01,		\
+		.limit0		= ((limit) >>  0) & 0xFFFF,	\
+		.limit1		= ((limit) >> 16) & 0x000F,	\
+		.base0		= ((base)  >>  0) & 0xFFFF,	\
+		.base1		= ((base)  >> 16) & 0x00FF,	\
+		.base2		= ((base)  >> 24) & 0x00FF,	\
+		.type		= ((flags) >>  0) & 0x000F,	\
+		.s		= ((flags) >>  4) & 0x0001,	\
+		.dpl		= ((flags) >>  5) & 0x0003,	\
+		.p		= ((flags) >>  7) & 0x0001,	\
+		.avl		= ((flags) >> 12) & 0x0001,	\
+		.l		= ((flags) >> 13) & 0x0001,	\
+		.d		= ((flags) >> 14) & 0x0001,	\
+		.g		= ((flags) >> 15) & 0x0001,	\
 	}
 
 enum {
@@ -94,6 +144,7 @@ struct gate_struct {
 
 typedef struct gate_struct gate_desc;
 
+#ifndef _SETUP
 static inline unsigned long gate_offset(const gate_desc *g)
 {
 #ifdef CONFIG_X86_64
@@ -108,6 +159,7 @@ static inline unsigned long gate_segment(const gate_desc *g)
 {
 	return g->segment;
 }
+#endif
 
 struct desc_ptr {
 	unsigned short size;
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index a0234dfd1031..1e16bd5ac781 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -150,7 +150,7 @@ do {						\
 	((x)->e_machine == EM_X86_64)
 
 #define compat_elf_check_arch(x)					\
-	((elf_check_arch_ia32(x) && ia32_enabled()) ||			\
+	((elf_check_arch_ia32(x) && ia32_enabled_verbose()) ||		\
 	 (IS_ENABLED(CONFIG_X86_X32_ABI) && (x)->e_machine == EM_X86_64))
 
 static inline void elf_common_init(struct thread_struct *t,
diff --git a/arch/x86/include/asm/entry-common.h b/arch/x86/include/asm/entry-common.h
index ce8f50192ae3..7e523bb3d2d3 100644
--- a/arch/x86/include/asm/entry-common.h
+++ b/arch/x86/include/asm/entry-common.h
@@ -91,7 +91,6 @@ static inline void arch_exit_to_user_mode_prepare(struct pt_regs *regs,
 
 static __always_inline void arch_exit_to_user_mode(void)
 {
-	mds_user_clear_cpu_buffers();
 	amd_clear_divider();
 }
 #define arch_exit_to_user_mode arch_exit_to_user_mode
diff --git a/arch/x86/include/asm/extable_fixup_types.h b/arch/x86/include/asm/extable_fixup_types.h
index 991e31cfde94..fe6312045042 100644
--- a/arch/x86/include/asm/extable_fixup_types.h
+++ b/arch/x86/include/asm/extable_fixup_types.h
@@ -4,7 +4,7 @@
 
 /*
  * Our IMM is signed, as such it must live at the top end of the word. Also,
- * since C99 hex constants are of ambigious type, force cast the mask to 'int'
+ * since C99 hex constants are of ambiguous type, force cast the mask to 'int'
  * so that FIELD_GET() will DTRT and sign extend the value when it extracts it.
  */
 #define EX_DATA_TYPE_MASK		((int)0x000000FF)
diff --git a/arch/x86/include/asm/fpu/types.h b/arch/x86/include/asm/fpu/types.h
index eb810074f1e7..ace9aa3b78a3 100644
--- a/arch/x86/include/asm/fpu/types.h
+++ b/arch/x86/include/asm/fpu/types.h
@@ -5,6 +5,8 @@
 #ifndef _ASM_X86_FPU_H
 #define _ASM_X86_FPU_H
 
+#include <asm/page_types.h>
+
 /*
  * The legacy x87 FPU state format, as saved by FSAVE and
  * restored by the FRSTOR instructions:
@@ -415,7 +417,7 @@ struct fpu_state_perm {
 	 *
 	 * This master permission field is only to be used when
 	 * task.fpu.fpstate based checks fail to validate whether the task
-	 * is allowed to expand it's xfeatures set which requires to
+	 * is allowed to expand its xfeatures set which requires to
 	 * allocate a larger sized fpstate buffer.
 	 *
 	 * Do not access this field directly.  Use the provided helper
diff --git a/arch/x86/include/asm/ia32.h b/arch/x86/include/asm/ia32.h
index 9805629479d9..c7ef6ea2fa99 100644
--- a/arch/x86/include/asm/ia32.h
+++ b/arch/x86/include/asm/ia32.h
@@ -2,7 +2,6 @@
 #ifndef _ASM_X86_IA32_H
 #define _ASM_X86_IA32_H
 
-
 #ifdef CONFIG_IA32_EMULATION
 
 #include <linux/compat.h>
@@ -91,4 +90,14 @@ static inline void ia32_disable(void) {}
 
 #endif
 
+static inline bool ia32_enabled_verbose(void)
+{
+	bool enabled = ia32_enabled();
+
+	if (IS_ENABLED(CONFIG_IA32_EMULATION) && !enabled)
+		pr_notice_once("32-bit emulation disabled. You can reenable with ia32_emulation=on\n");
+
+	return enabled;
+}
+
 #endif /* _ASM_X86_IA32_H */
diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h
index 197316121f04..b65e9c46b922 100644
--- a/arch/x86/include/asm/intel-family.h
+++ b/arch/x86/include/asm/intel-family.h
@@ -162,6 +162,8 @@
 #define INTEL_FAM6_ATOM_CRESTMONT_X	0xAF /* Sierra Forest */
 #define INTEL_FAM6_ATOM_CRESTMONT	0xB6 /* Grand Ridge */
 
+#define INTEL_FAM6_ATOM_DARKMONT_X	0xDD /* Clearwater Forest */
+
 /* Xeon Phi */
 
 #define INTEL_FAM6_XEON_PHI_KNL		0x57 /* Knights Landing */
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 76238842406a..3814a9263d64 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -242,7 +242,7 @@ static inline void slow_down_io(void)
 
 #endif
 
-#define BUILDIO(bwl, bw, type)						\
+#define BUILDIO(bwl, type)						\
 static inline void out##bwl##_p(type value, u16 port)			\
 {									\
 	out##bwl(value, port);						\
@@ -288,9 +288,9 @@ static inline void ins##bwl(u16 port, void *addr, unsigned long count)	\
 	}								\
 }
 
-BUILDIO(b, b, u8)
-BUILDIO(w, w, u16)
-BUILDIO(l,  , u32)
+BUILDIO(b, u8)
+BUILDIO(w, u16)
+BUILDIO(l, u32)
 #undef BUILDIO
 
 #define inb_p inb_p
diff --git a/arch/x86/include/asm/iosf_mbi.h b/arch/x86/include/asm/iosf_mbi.h
index a1911fea8739..af7541c11821 100644
--- a/arch/x86/include/asm/iosf_mbi.h
+++ b/arch/x86/include/asm/iosf_mbi.h
@@ -111,7 +111,7 @@ int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask);
  * This function will block all kernel access to the PMIC I2C bus, so that the
  * P-Unit can safely access the PMIC over the shared I2C bus.
  *
- * Note on these systems the i2c-bus driver will request a sempahore from the
+ * Note on these systems the i2c-bus driver will request a semaphore from the
  * P-Unit for exclusive access to the PMIC bus when i2c drivers are accessing
  * it, but this does not appear to be sufficient, we still need to avoid making
  * certain P-Unit requests during the access window to avoid problems.
diff --git a/arch/x86/include/asm/irq_work.h b/arch/x86/include/asm/irq_work.h
index 800ffce0db29..6b4d36c95165 100644
--- a/arch/x86/include/asm/irq_work.h
+++ b/arch/x86/include/asm/irq_work.h
@@ -9,7 +9,6 @@ static inline bool arch_irq_work_has_interrupt(void)
 {
 	return boot_cpu_has(X86_FEATURE_APIC);
 }
-extern void arch_irq_work_raise(void);
 #else
 static inline bool arch_irq_work_has_interrupt(void)
 {
diff --git a/arch/x86/include/asm/jump_label.h b/arch/x86/include/asm/jump_label.h
index 071572e23d3a..cbbef32517f0 100644
--- a/arch/x86/include/asm/jump_label.h
+++ b/arch/x86/include/asm/jump_label.h
@@ -24,7 +24,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:"
+	asm goto("1:"
 		"jmp %l[l_yes] # objtool NOPs this \n\t"
 		JUMP_TABLE_ENTRY
 		: :  "i" (key), "i" (2 | branch) : : l_yes);
@@ -38,7 +38,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch(struct static_key * const key, const bool branch)
 {
-	asm_volatile_goto("1:"
+	asm goto("1:"
 		".byte " __stringify(BYTES_NOP5) "\n\t"
 		JUMP_TABLE_ENTRY
 		: :  "i" (key), "i" (branch) : : l_yes);
@@ -52,7 +52,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key * const key, const bool branch)
 {
-	asm_volatile_goto("1:"
+	asm goto("1:"
 		"jmp %l[l_yes]\n\t"
 		JUMP_TABLE_ENTRY
 		: :  "i" (key), "i" (branch) : : l_yes);
diff --git a/arch/x86/include/asm/kmsan.h b/arch/x86/include/asm/kmsan.h
index 8fa6ac0e2d76..d91b37f5b4bb 100644
--- a/arch/x86/include/asm/kmsan.h
+++ b/arch/x86/include/asm/kmsan.h
@@ -64,6 +64,7 @@ static inline bool kmsan_virt_addr_valid(void *addr)
 {
 	unsigned long x = (unsigned long)addr;
 	unsigned long y = x - __START_KERNEL_map;
+	bool ret;
 
 	/* use the carry flag to determine if x was < __START_KERNEL_map */
 	if (unlikely(x > y)) {
@@ -79,7 +80,21 @@ static inline bool kmsan_virt_addr_valid(void *addr)
 			return false;
 	}
 
-	return pfn_valid(x >> PAGE_SHIFT);
+	/*
+	 * pfn_valid() relies on RCU, and may call into the scheduler on exiting
+	 * the critical section. However, this would result in recursion with
+	 * KMSAN. Therefore, disable preemption here, and re-enable preemption
+	 * below while suppressing reschedules to avoid recursion.
+	 *
+	 * Note, this sacrifices occasionally breaking scheduling guarantees.
+	 * Although, a kernel compiled with KMSAN has already given up on any
+	 * performance guarantees due to being heavily instrumented.
+	 */
+	preempt_disable();
+	ret = pfn_valid(x >> PAGE_SHIFT);
+	preempt_enable_no_resched();
+
+	return ret;
 }
 
 #endif /* !MODULE */
diff --git a/arch/x86/include/asm/kvm-x86-ops.h b/arch/x86/include/asm/kvm-x86-ops.h
index 26b628d84594..378ed944b849 100644
--- a/arch/x86/include/asm/kvm-x86-ops.h
+++ b/arch/x86/include/asm/kvm-x86-ops.h
@@ -55,8 +55,10 @@ KVM_X86_OP(set_rflags)
 KVM_X86_OP(get_if_flag)
 KVM_X86_OP(flush_tlb_all)
 KVM_X86_OP(flush_tlb_current)
+#if IS_ENABLED(CONFIG_HYPERV)
 KVM_X86_OP_OPTIONAL(flush_remote_tlbs)
 KVM_X86_OP_OPTIONAL(flush_remote_tlbs_range)
+#endif
 KVM_X86_OP(flush_tlb_gva)
 KVM_X86_OP(flush_tlb_guest)
 KVM_X86_OP(vcpu_pre_run)
@@ -135,6 +137,7 @@ KVM_X86_OP(msr_filter_changed)
 KVM_X86_OP(complete_emulated_msr)
 KVM_X86_OP(vcpu_deliver_sipi_vector)
 KVM_X86_OP_OPTIONAL_RET0(vcpu_get_apicv_inhibit_reasons);
+KVM_X86_OP_OPTIONAL(get_untagged_addr)
 
 #undef KVM_X86_OP
 #undef KVM_X86_OP_OPTIONAL
diff --git a/arch/x86/include/asm/kvm-x86-pmu-ops.h b/arch/x86/include/asm/kvm-x86-pmu-ops.h
index 6c98f4bb4228..058bc636356a 100644
--- a/arch/x86/include/asm/kvm-x86-pmu-ops.h
+++ b/arch/x86/include/asm/kvm-x86-pmu-ops.h
@@ -22,7 +22,7 @@ KVM_X86_PMU_OP(get_msr)
 KVM_X86_PMU_OP(set_msr)
 KVM_X86_PMU_OP(refresh)
 KVM_X86_PMU_OP(init)
-KVM_X86_PMU_OP(reset)
+KVM_X86_PMU_OP_OPTIONAL(reset)
 KVM_X86_PMU_OP_OPTIONAL(deliver_pmi)
 KVM_X86_PMU_OP_OPTIONAL(cleanup)
 
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index d7036982332e..d271ba20a0b2 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -133,7 +133,8 @@
 			  | X86_CR4_PGE | X86_CR4_PCE | X86_CR4_OSFXSR | X86_CR4_PCIDE \
 			  | X86_CR4_OSXSAVE | X86_CR4_SMEP | X86_CR4_FSGSBASE \
 			  | X86_CR4_OSXMMEXCPT | X86_CR4_LA57 | X86_CR4_VMXE \
-			  | X86_CR4_SMAP | X86_CR4_PKE | X86_CR4_UMIP))
+			  | X86_CR4_SMAP | X86_CR4_PKE | X86_CR4_UMIP \
+			  | X86_CR4_LAM_SUP))
 
 #define CR8_RESERVED_BITS (~(unsigned long)X86_CR8_TPR)
 
@@ -500,8 +501,23 @@ struct kvm_pmc {
 	u8 idx;
 	bool is_paused;
 	bool intr;
+	/*
+	 * Base value of the PMC counter, relative to the *consumed* count in
+	 * the associated perf_event.  This value includes counter updates from
+	 * the perf_event and emulated_count since the last time the counter
+	 * was reprogrammed, but it is *not* the current value as seen by the
+	 * guest or userspace.
+	 *
+	 * The count is relative to the associated perf_event so that KVM
+	 * doesn't need to reprogram the perf_event every time the guest writes
+	 * to the counter.
+	 */
 	u64 counter;
-	u64 prev_counter;
+	/*
+	 * PMC events triggered by KVM emulation that haven't been fully
+	 * processed, i.e. haven't undergone overflow detection.
+	 */
+	u64 emulated_counter;
 	u64 eventsel;
 	struct perf_event *perf_event;
 	struct kvm_vcpu *vcpu;
@@ -937,8 +953,10 @@ struct kvm_vcpu_arch {
 	/* used for guest single stepping over the given code position */
 	unsigned long singlestep_rip;
 
+#ifdef CONFIG_KVM_HYPERV
 	bool hyperv_enabled;
 	struct kvm_vcpu_hv *hyperv;
+#endif
 #ifdef CONFIG_KVM_XEN
 	struct kvm_vcpu_xen xen;
 #endif
@@ -1095,6 +1113,7 @@ enum hv_tsc_page_status {
 	HV_TSC_PAGE_BROKEN,
 };
 
+#ifdef CONFIG_KVM_HYPERV
 /* Hyper-V emulation context */
 struct kvm_hv {
 	struct mutex hv_lock;
@@ -1125,9 +1144,11 @@ struct kvm_hv {
 	 */
 	unsigned int synic_auto_eoi_used;
 
-	struct hv_partition_assist_pg *hv_pa_pg;
 	struct kvm_hv_syndbg hv_syndbg;
+
+	bool xsaves_xsavec_checked;
 };
+#endif
 
 struct msr_bitmap_range {
 	u32 flags;
@@ -1136,6 +1157,7 @@ struct msr_bitmap_range {
 	unsigned long *bitmap;
 };
 
+#ifdef CONFIG_KVM_XEN
 /* Xen emulation context */
 struct kvm_xen {
 	struct mutex xen_lock;
@@ -1147,6 +1169,7 @@ struct kvm_xen {
 	struct idr evtchn_ports;
 	unsigned long poll_mask[BITS_TO_LONGS(KVM_MAX_VCPUS)];
 };
+#endif
 
 enum kvm_irqchip_mode {
 	KVM_IRQCHIP_NONE,
@@ -1255,6 +1278,7 @@ enum kvm_apicv_inhibit {
 };
 
 struct kvm_arch {
+	unsigned long vm_type;
 	unsigned long n_used_mmu_pages;
 	unsigned long n_requested_mmu_pages;
 	unsigned long n_max_mmu_pages;
@@ -1347,8 +1371,13 @@ struct kvm_arch {
 	/* reads protected by irq_srcu, writes by irq_lock */
 	struct hlist_head mask_notifier_list;
 
+#ifdef CONFIG_KVM_HYPERV
 	struct kvm_hv hyperv;
+#endif
+
+#ifdef CONFIG_KVM_XEN
 	struct kvm_xen xen;
+#endif
 
 	bool backwards_tsc_observed;
 	bool boot_vcpu_runs_old_kvmclock;
@@ -1406,9 +1435,8 @@ struct kvm_arch {
 	 *	the MMU lock in read mode + RCU or
 	 *	the MMU lock in write mode
 	 *
-	 * For writes, this list is protected by:
-	 *	the MMU lock in read mode + the tdp_mmu_pages_lock or
-	 *	the MMU lock in write mode
+	 * For writes, this list is protected by tdp_mmu_pages_lock; see
+	 * below for the details.
 	 *
 	 * Roots will remain in the list until their tdp_mmu_root_count
 	 * drops to zero, at which point the thread that decremented the
@@ -1425,8 +1453,10 @@ struct kvm_arch {
 	 *  - possible_nx_huge_pages;
 	 *  - the possible_nx_huge_page_link field of kvm_mmu_page structs used
 	 *    by the TDP MMU
-	 * It is acceptable, but not necessary, to acquire this lock when
-	 * the thread holds the MMU lock in write mode.
+	 * Because the lock is only taken within the MMU lock, strictly
+	 * speaking it is redundant to acquire this lock when the thread
+	 * holds the MMU lock in write mode.  However it often simplifies
+	 * the code to do so.
 	 */
 	spinlock_t tdp_mmu_pages_lock;
 #endif /* CONFIG_X86_64 */
@@ -1441,6 +1471,7 @@ struct kvm_arch {
 #if IS_ENABLED(CONFIG_HYPERV)
 	hpa_t	hv_root_tdp;
 	spinlock_t hv_root_tdp_lock;
+	struct hv_partition_assist_pg *hv_pa_pg;
 #endif
 	/*
 	 * VM-scope maximum vCPU ID. Used to determine the size of structures
@@ -1613,9 +1644,11 @@ struct kvm_x86_ops {
 
 	void (*flush_tlb_all)(struct kvm_vcpu *vcpu);
 	void (*flush_tlb_current)(struct kvm_vcpu *vcpu);
+#if IS_ENABLED(CONFIG_HYPERV)
 	int  (*flush_remote_tlbs)(struct kvm *kvm);
 	int  (*flush_remote_tlbs_range)(struct kvm *kvm, gfn_t gfn,
 					gfn_t nr_pages);
+#endif
 
 	/*
 	 * Flush any TLB entries associated with the given GVA.
@@ -1652,7 +1685,7 @@ struct kvm_x86_ops {
 	/* Whether or not a virtual NMI is pending in hardware. */
 	bool (*is_vnmi_pending)(struct kvm_vcpu *vcpu);
 	/*
-	 * Attempt to pend a virtual NMI in harware.  Returns %true on success
+	 * Attempt to pend a virtual NMI in hardware.  Returns %true on success
 	 * to allow using static_call_ret0 as the fallback.
 	 */
 	bool (*set_vnmi_pending)(struct kvm_vcpu *vcpu);
@@ -1761,6 +1794,8 @@ struct kvm_x86_ops {
 	 * Returns vCPU specific APICv inhibit reasons
 	 */
 	unsigned long (*vcpu_get_apicv_inhibit_reasons)(struct kvm_vcpu *vcpu);
+
+	gva_t (*get_untagged_addr)(struct kvm_vcpu *vcpu, gva_t gva, unsigned int flags);
 };
 
 struct kvm_x86_nested_ops {
@@ -1824,6 +1859,7 @@ static inline struct kvm *kvm_arch_alloc_vm(void)
 #define __KVM_HAVE_ARCH_VM_FREE
 void kvm_arch_free_vm(struct kvm *kvm);
 
+#if IS_ENABLED(CONFIG_HYPERV)
 #define __KVM_HAVE_ARCH_FLUSH_REMOTE_TLBS
 static inline int kvm_arch_flush_remote_tlbs(struct kvm *kvm)
 {
@@ -1835,6 +1871,15 @@ static inline int kvm_arch_flush_remote_tlbs(struct kvm *kvm)
 }
 
 #define __KVM_HAVE_ARCH_FLUSH_REMOTE_TLBS_RANGE
+static inline int kvm_arch_flush_remote_tlbs_range(struct kvm *kvm, gfn_t gfn,
+						   u64 nr_pages)
+{
+	if (!kvm_x86_ops.flush_remote_tlbs_range)
+		return -EOPNOTSUPP;
+
+	return static_call(kvm_x86_flush_remote_tlbs_range)(kvm, gfn, nr_pages);
+}
+#endif /* CONFIG_HYPERV */
 
 #define kvm_arch_pmi_in_guest(vcpu) \
 	((vcpu) && (vcpu)->arch.handling_intr_from_guest)
@@ -1848,6 +1893,9 @@ int kvm_mmu_create(struct kvm_vcpu *vcpu);
 void kvm_mmu_init_vm(struct kvm *kvm);
 void kvm_mmu_uninit_vm(struct kvm *kvm);
 
+void kvm_mmu_init_memslot_memory_attributes(struct kvm *kvm,
+					    struct kvm_memory_slot *slot);
+
 void kvm_mmu_after_set_cpuid(struct kvm_vcpu *vcpu);
 void kvm_mmu_reset_context(struct kvm_vcpu *vcpu);
 void kvm_mmu_slot_remove_write_access(struct kvm *kvm,
@@ -2086,6 +2134,12 @@ void kvm_mmu_new_pgd(struct kvm_vcpu *vcpu, gpa_t new_pgd);
 void kvm_configure_mmu(bool enable_tdp, int tdp_forced_root_level,
 		       int tdp_max_root_level, int tdp_huge_page_level);
 
+#ifdef CONFIG_KVM_PRIVATE_MEM
+#define kvm_arch_has_private_mem(kvm) ((kvm)->arch.vm_type != KVM_X86_DEFAULT_VM)
+#else
+#define kvm_arch_has_private_mem(kvm) false
+#endif
+
 static inline u16 kvm_read_ldt(void)
 {
 	u16 ldt;
@@ -2133,16 +2187,15 @@ enum {
 #define HF_SMM_MASK		(1 << 1)
 #define HF_SMM_INSIDE_NMI_MASK	(1 << 2)
 
-# define __KVM_VCPU_MULTIPLE_ADDRESS_SPACE
-# define KVM_ADDRESS_SPACE_NUM 2
+# define KVM_MAX_NR_ADDRESS_SPACES	2
+/* SMM is currently unsupported for guests with private memory. */
+# define kvm_arch_nr_memslot_as_ids(kvm) (kvm_arch_has_private_mem(kvm) ? 1 : 2)
 # define kvm_arch_vcpu_memslots_id(vcpu) ((vcpu)->arch.hflags & HF_SMM_MASK ? 1 : 0)
 # define kvm_memslots_for_spte_role(kvm, role) __kvm_memslots(kvm, (role).smm)
 #else
 # define kvm_memslots_for_spte_role(kvm, role) __kvm_memslots(kvm, 0)
 #endif
 
-#define KVM_ARCH_WANT_MMU_NOTIFIER
-
 int kvm_cpu_has_injectable_intr(struct kvm_vcpu *v);
 int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu);
 int kvm_cpu_has_extint(struct kvm_vcpu *v);
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 6de6e1d95952..de3118305838 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -311,6 +311,7 @@ enum smca_bank_types {
 	SMCA_PIE,	/* Power, Interrupts, etc. */
 	SMCA_UMC,	/* Unified Memory Controller */
 	SMCA_UMC_V2,
+	SMCA_MA_LLC,	/* Memory Attached Last Level Cache */
 	SMCA_PB,	/* Parameter Block */
 	SMCA_PSP,	/* Platform Security Processor */
 	SMCA_PSP_V2,
@@ -326,6 +327,8 @@ enum smca_bank_types {
 	SMCA_SHUB,	/* System HUB Unit */
 	SMCA_SATA,	/* SATA Unit */
 	SMCA_USB,	/* USB Unit */
+	SMCA_USR_DP,	/* Ultra Short Reach Data Plane Controller */
+	SMCA_USR_CP,	/* Ultra Short Reach Control Plane Controller */
 	SMCA_GMI_PCS,	/* GMI PCS Unit */
 	SMCA_XGMI_PHY,	/* xGMI PHY Unit */
 	SMCA_WAFL_PHY,	/* WAFL PHY Unit */
@@ -333,7 +336,6 @@ enum smca_bank_types {
 	N_SMCA_BANK_TYPES
 };
 
-extern const char *smca_get_long_name(enum smca_bank_types t);
 extern bool amd_mce_is_memory_error(struct mce *m);
 
 extern int mce_threshold_create_device(unsigned int cpu);
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 1d51e1850ed0..f1bd7b91b3c6 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -237,6 +237,11 @@
 #define LBR_INFO_CYCLES			0xffff
 #define LBR_INFO_BR_TYPE_OFFSET		56
 #define LBR_INFO_BR_TYPE		(0xfull << LBR_INFO_BR_TYPE_OFFSET)
+#define LBR_INFO_BR_CNTR_OFFSET		32
+#define LBR_INFO_BR_CNTR_NUM		4
+#define LBR_INFO_BR_CNTR_BITS		2
+#define LBR_INFO_BR_CNTR_MASK		GENMASK_ULL(LBR_INFO_BR_CNTR_BITS - 1, 0)
+#define LBR_INFO_BR_CNTR_FULL_MASK	GENMASK_ULL(LBR_INFO_BR_CNTR_NUM * LBR_INFO_BR_CNTR_BITS - 1, 0)
 
 #define MSR_ARCH_LBR_CTL		0x000014ce
 #define ARCH_LBR_CTL_LBREN		BIT(0)
@@ -536,6 +541,9 @@
 #define MSR_RELOAD_PMC0			0x000014c1
 #define MSR_RELOAD_FIXED_CTR0		0x00001309
 
+/* KeyID partitioning between MKTME and TDX */
+#define MSR_IA32_MKTME_KEYID_PARTITIONING	0x00000087
+
 /*
  * AMD64 MSRs. Not complete. See the architecture manual for a more
  * complete list.
diff --git a/arch/x86/include/asm/mwait.h b/arch/x86/include/asm/mwait.h
index 778df05f8539..920426d691ce 100644
--- a/arch/x86/include/asm/mwait.h
+++ b/arch/x86/include/asm/mwait.h
@@ -87,6 +87,15 @@ static __always_inline void __mwaitx(unsigned long eax, unsigned long ebx,
 		     :: "a" (eax), "b" (ebx), "c" (ecx));
 }
 
+/*
+ * Re-enable interrupts right upon calling mwait in such a way that
+ * no interrupt can fire _before_ the execution of mwait, ie: no
+ * instruction must be placed between "sti" and "mwait".
+ *
+ * This is necessary because if an interrupt queues a timer before
+ * executing mwait, it would otherwise go unnoticed and the next tick
+ * would not be reprogrammed accordingly before mwait ever wakes up.
+ */
 static __always_inline void __sti_mwait(unsigned long eax, unsigned long ecx)
 {
 	mds_idle_clear_cpu_buffers();
@@ -115,8 +124,15 @@ static __always_inline void mwait_idle_with_hints(unsigned long eax, unsigned lo
 		}
 
 		__monitor((void *)&current_thread_info()->flags, 0, 0);
-		if (!need_resched())
-			__mwait(eax, ecx);
+
+		if (!need_resched()) {
+			if (ecx & 1) {
+				__mwait(eax, ecx);
+			} else {
+				__sti_mwait(eax, ecx);
+				raw_local_irq_disable();
+			}
+		}
 	}
 	current_clr_polling();
 }
diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h
index f93e9b96927a..2aa52cab1e46 100644
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -49,7 +49,7 @@
  * but there is still a cushion vs. the RSB depth. The algorithm does not
  * claim to be perfect and it can be speculated around by the CPU, but it
  * is considered that it obfuscates the problem enough to make exploitation
- * extremly difficult.
+ * extremely difficult.
  */
 #define RET_DEPTH_SHIFT			5
 #define RSB_RET_STUFF_LOOPS		16
@@ -208,7 +208,7 @@
 
 /*
  * Abuse ANNOTATE_RETPOLINE_SAFE on a NOP to indicate UNRET_END, should
- * eventually turn into it's own annotation.
+ * eventually turn into its own annotation.
  */
 .macro VALIDATE_UNRET_END
 #if defined(CONFIG_NOINSTR_VALIDATION) && \
@@ -315,6 +315,17 @@
 #endif
 .endm
 
+/*
+ * Macro to execute VERW instruction that mitigate transient data sampling
+ * attacks such as MDS. On affected systems a microcode update overloaded VERW
+ * instruction to also clear the CPU buffers. VERW clobbers CFLAGS.ZF.
+ *
+ * Note: Only the memory operand variant of VERW clears the CPU buffers.
+ */
+.macro CLEAR_CPU_BUFFERS
+	ALTERNATIVE "", __stringify(verw _ASM_RIP(mds_verw_sel)), X86_FEATURE_CLEAR_CPU_BUF
+.endm
+
 #else /* __ASSEMBLY__ */
 
 #define ANNOTATE_RETPOLINE_SAFE					\
@@ -529,13 +540,14 @@ DECLARE_STATIC_KEY_FALSE(switch_to_cond_stibp);
 DECLARE_STATIC_KEY_FALSE(switch_mm_cond_ibpb);
 DECLARE_STATIC_KEY_FALSE(switch_mm_always_ibpb);
 
-DECLARE_STATIC_KEY_FALSE(mds_user_clear);
 DECLARE_STATIC_KEY_FALSE(mds_idle_clear);
 
 DECLARE_STATIC_KEY_FALSE(switch_mm_cond_l1d_flush);
 
 DECLARE_STATIC_KEY_FALSE(mmio_stale_data_clear);
 
+extern u16 mds_verw_sel;
+
 #include <asm/segment.h>
 
 /**
@@ -562,17 +574,6 @@ static __always_inline void mds_clear_cpu_buffers(void)
 }
 
 /**
- * mds_user_clear_cpu_buffers - Mitigation for MDS and TAA vulnerability
- *
- * Clear CPU buffers if the corresponding static key is enabled
- */
-static __always_inline void mds_user_clear_cpu_buffers(void)
-{
-	if (static_branch_likely(&mds_user_clear))
-		mds_clear_cpu_buffers();
-}
-
-/**
  * mds_idle_clear_cpu_buffers - Mitigation for MDS vulnerability
  *
  * Clear CPU buffers if the corresponding static key is enabled
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 6c8ff12140ae..d4eb9e1d61b8 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -6,6 +6,10 @@
 
 #include <asm/paravirt_types.h>
 
+#ifndef __ASSEMBLY__
+struct mm_struct;
+#endif
+
 #ifdef CONFIG_PARAVIRT
 #include <asm/pgtable_types.h>
 #include <asm/asm.h>
@@ -142,8 +146,7 @@ static inline void write_cr0(unsigned long x)
 static __always_inline unsigned long read_cr2(void)
 {
 	return PVOP_ALT_CALLEE0(unsigned long, mmu.read_cr2,
-				"mov %%cr2, %%rax;",
-				ALT_NOT(X86_FEATURE_XENPV));
+				"mov %%cr2, %%rax;", ALT_NOT_XEN);
 }
 
 static __always_inline void write_cr2(unsigned long x)
@@ -154,13 +157,12 @@ static __always_inline void write_cr2(unsigned long x)
 static inline unsigned long __read_cr3(void)
 {
 	return PVOP_ALT_CALL0(unsigned long, mmu.read_cr3,
-			      "mov %%cr3, %%rax;", ALT_NOT(X86_FEATURE_XENPV));
+			      "mov %%cr3, %%rax;", ALT_NOT_XEN);
 }
 
 static inline void write_cr3(unsigned long x)
 {
-	PVOP_ALT_VCALL1(mmu.write_cr3, x,
-			"mov %%rdi, %%cr3", ALT_NOT(X86_FEATURE_XENPV));
+	PVOP_ALT_VCALL1(mmu.write_cr3, x, "mov %%rdi, %%cr3", ALT_NOT_XEN);
 }
 
 static inline void __write_cr4(unsigned long x)
@@ -182,7 +184,7 @@ extern noinstr void pv_native_wbinvd(void);
 
 static __always_inline void wbinvd(void)
 {
-	PVOP_ALT_VCALL0(cpu.wbinvd, "wbinvd", ALT_NOT(X86_FEATURE_XENPV));
+	PVOP_ALT_VCALL0(cpu.wbinvd, "wbinvd", ALT_NOT_XEN);
 }
 
 static inline u64 paravirt_read_msr(unsigned msr)
@@ -390,27 +392,25 @@ static inline void paravirt_release_p4d(unsigned long pfn)
 static inline pte_t __pte(pteval_t val)
 {
 	return (pte_t) { PVOP_ALT_CALLEE1(pteval_t, mmu.make_pte, val,
-					  "mov %%rdi, %%rax",
-					  ALT_NOT(X86_FEATURE_XENPV)) };
+					  "mov %%rdi, %%rax", ALT_NOT_XEN) };
 }
 
 static inline pteval_t pte_val(pte_t pte)
 {
 	return PVOP_ALT_CALLEE1(pteval_t, mmu.pte_val, pte.pte,
-				"mov %%rdi, %%rax", ALT_NOT(X86_FEATURE_XENPV));
+				"mov %%rdi, %%rax", ALT_NOT_XEN);
 }
 
 static inline pgd_t __pgd(pgdval_t val)
 {
 	return (pgd_t) { PVOP_ALT_CALLEE1(pgdval_t, mmu.make_pgd, val,
-					  "mov %%rdi, %%rax",
-					  ALT_NOT(X86_FEATURE_XENPV)) };
+					  "mov %%rdi, %%rax", ALT_NOT_XEN) };
 }
 
 static inline pgdval_t pgd_val(pgd_t pgd)
 {
 	return PVOP_ALT_CALLEE1(pgdval_t, mmu.pgd_val, pgd.pgd,
-				"mov %%rdi, %%rax", ALT_NOT(X86_FEATURE_XENPV));
+				"mov %%rdi, %%rax", ALT_NOT_XEN);
 }
 
 #define  __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION
@@ -444,14 +444,13 @@ static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
 static inline pmd_t __pmd(pmdval_t val)
 {
 	return (pmd_t) { PVOP_ALT_CALLEE1(pmdval_t, mmu.make_pmd, val,
-					  "mov %%rdi, %%rax",
-					  ALT_NOT(X86_FEATURE_XENPV)) };
+					  "mov %%rdi, %%rax", ALT_NOT_XEN) };
 }
 
 static inline pmdval_t pmd_val(pmd_t pmd)
 {
 	return PVOP_ALT_CALLEE1(pmdval_t, mmu.pmd_val, pmd.pmd,
-				"mov %%rdi, %%rax", ALT_NOT(X86_FEATURE_XENPV));
+				"mov %%rdi, %%rax", ALT_NOT_XEN);
 }
 
 static inline void set_pud(pud_t *pudp, pud_t pud)
@@ -464,7 +463,7 @@ static inline pud_t __pud(pudval_t val)
 	pudval_t ret;
 
 	ret = PVOP_ALT_CALLEE1(pudval_t, mmu.make_pud, val,
-			       "mov %%rdi, %%rax", ALT_NOT(X86_FEATURE_XENPV));
+			       "mov %%rdi, %%rax", ALT_NOT_XEN);
 
 	return (pud_t) { ret };
 }
@@ -472,7 +471,7 @@ static inline pud_t __pud(pudval_t val)
 static inline pudval_t pud_val(pud_t pud)
 {
 	return PVOP_ALT_CALLEE1(pudval_t, mmu.pud_val, pud.pud,
-				"mov %%rdi, %%rax", ALT_NOT(X86_FEATURE_XENPV));
+				"mov %%rdi, %%rax", ALT_NOT_XEN);
 }
 
 static inline void pud_clear(pud_t *pudp)
@@ -492,8 +491,7 @@ static inline void set_p4d(p4d_t *p4dp, p4d_t p4d)
 static inline p4d_t __p4d(p4dval_t val)
 {
 	p4dval_t ret = PVOP_ALT_CALLEE1(p4dval_t, mmu.make_p4d, val,
-					"mov %%rdi, %%rax",
-					ALT_NOT(X86_FEATURE_XENPV));
+					"mov %%rdi, %%rax", ALT_NOT_XEN);
 
 	return (p4d_t) { ret };
 }
@@ -501,7 +499,7 @@ static inline p4d_t __p4d(p4dval_t val)
 static inline p4dval_t p4d_val(p4d_t p4d)
 {
 	return PVOP_ALT_CALLEE1(p4dval_t, mmu.p4d_val, p4d.p4d,
-				"mov %%rdi, %%rax", ALT_NOT(X86_FEATURE_XENPV));
+				"mov %%rdi, %%rax", ALT_NOT_XEN);
 }
 
 static inline void __set_pgd(pgd_t *pgdp, pgd_t pgd)
@@ -687,17 +685,17 @@ bool __raw_callee_save___native_vcpu_is_preempted(long cpu);
 static __always_inline unsigned long arch_local_save_flags(void)
 {
 	return PVOP_ALT_CALLEE0(unsigned long, irq.save_fl, "pushf; pop %%rax;",
-				ALT_NOT(X86_FEATURE_XENPV));
+				ALT_NOT_XEN);
 }
 
 static __always_inline void arch_local_irq_disable(void)
 {
-	PVOP_ALT_VCALLEE0(irq.irq_disable, "cli;", ALT_NOT(X86_FEATURE_XENPV));
+	PVOP_ALT_VCALLEE0(irq.irq_disable, "cli;", ALT_NOT_XEN);
 }
 
 static __always_inline void arch_local_irq_enable(void)
 {
-	PVOP_ALT_VCALLEE0(irq.irq_enable, "sti;", ALT_NOT(X86_FEATURE_XENPV));
+	PVOP_ALT_VCALLEE0(irq.irq_enable, "sti;", ALT_NOT_XEN);
 }
 
 static __always_inline unsigned long arch_local_irq_save(void)
@@ -726,52 +724,25 @@ static __always_inline unsigned long arch_local_irq_save(void)
 #undef PVOP_VCALL4
 #undef PVOP_CALL4
 
-#define DEFINE_PARAVIRT_ASM(func, instr, sec)		\
-	asm (".pushsection " #sec ", \"ax\"\n"		\
-	     ".global " #func "\n\t"			\
-	     ".type " #func ", @function\n\t"		\
-	     ASM_FUNC_ALIGN "\n"			\
-	     #func ":\n\t"				\
-	     ASM_ENDBR					\
-	     instr "\n\t"				\
-	     ASM_RET					\
-	     ".size " #func ", . - " #func "\n\t"	\
-	     ".popsection")
-
 extern void default_banner(void);
 void native_pv_lock_init(void) __init;
 
 #else  /* __ASSEMBLY__ */
 
-#define _PVSITE(ptype, ops, word, algn)		\
-771:;						\
-	ops;					\
-772:;						\
-	.pushsection .parainstructions,"a";	\
-	 .align	algn;				\
-	 word 771b;				\
-	 .byte ptype;				\
-	 .byte 772b-771b;			\
-	 _ASM_ALIGN;				\
-	.popsection
-
-
 #ifdef CONFIG_X86_64
 #ifdef CONFIG_PARAVIRT_XXL
+#ifdef CONFIG_DEBUG_ENTRY
 
-#define PARA_PATCH(off)		((off) / 8)
-#define PARA_SITE(ptype, ops)	_PVSITE(ptype, ops, .quad, 8)
 #define PARA_INDIRECT(addr)	*addr(%rip)
 
-#ifdef CONFIG_DEBUG_ENTRY
 .macro PARA_IRQ_save_fl
-	PARA_SITE(PARA_PATCH(PV_IRQ_save_fl),
-		  ANNOTATE_RETPOLINE_SAFE;
-		  call PARA_INDIRECT(pv_ops+PV_IRQ_save_fl);)
+	ANNOTATE_RETPOLINE_SAFE;
+	call PARA_INDIRECT(pv_ops+PV_IRQ_save_fl);
 .endm
 
-#define SAVE_FLAGS	ALTERNATIVE "PARA_IRQ_save_fl;", "pushf; pop %rax;", \
-				    ALT_NOT(X86_FEATURE_XENPV)
+#define SAVE_FLAGS ALTERNATIVE_2 "PARA_IRQ_save_fl;",			\
+				 "ALT_CALL_INSTR;", ALT_CALL_ALWAYS,	\
+				 "pushf; pop %rax;", ALT_NOT_XEN
 #endif
 #endif /* CONFIG_PARAVIRT_XXL */
 #endif	/* CONFIG_X86_64 */
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 772d03487520..8d4fbe1be489 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -2,18 +2,10 @@
 #ifndef _ASM_X86_PARAVIRT_TYPES_H
 #define _ASM_X86_PARAVIRT_TYPES_H
 
-#ifndef __ASSEMBLY__
-/* These all sit in the .parainstructions section to tell us what to patch. */
-struct paravirt_patch_site {
-	u8 *instr;		/* original instructions */
-	u8 type;		/* type of this instruction */
-	u8 len;			/* length of original instruction */
-};
-#endif
-
 #ifdef CONFIG_PARAVIRT
 
 #ifndef __ASSEMBLY__
+#include <linux/types.h>
 
 #include <asm/desc_defs.h>
 #include <asm/pgtable_types.h>
@@ -250,43 +242,11 @@ struct paravirt_patch_template {
 extern struct pv_info pv_info;
 extern struct paravirt_patch_template pv_ops;
 
-#define PARAVIRT_PATCH(x)					\
-	(offsetof(struct paravirt_patch_template, x) / sizeof(void *))
-
-#define paravirt_type(op)				\
-	[paravirt_typenum] "i" (PARAVIRT_PATCH(op)),	\
-	[paravirt_opptr] "m" (pv_ops.op)
-/*
- * Generate some code, and mark it as patchable by the
- * apply_paravirt() alternate instruction patcher.
- */
-#define _paravirt_alt(insn_string, type)		\
-	"771:\n\t" insn_string "\n" "772:\n"		\
-	".pushsection .parainstructions,\"a\"\n"	\
-	_ASM_ALIGN "\n"					\
-	_ASM_PTR " 771b\n"				\
-	"  .byte " type "\n"				\
-	"  .byte 772b-771b\n"				\
-	_ASM_ALIGN "\n"					\
-	".popsection\n"
-
-/* Generate patchable code, with the default asm parameters. */
-#define paravirt_alt(insn_string)					\
-	_paravirt_alt(insn_string, "%c[paravirt_typenum]")
-
-/* Simple instruction patching code. */
-#define NATIVE_LABEL(a,x,b) "\n\t.globl " a #x "_" #b "\n" a #x "_" #b ":\n\t"
-
-unsigned int paravirt_patch(u8 type, void *insn_buff, unsigned long addr, unsigned int len);
+#define paravirt_ptr(op)	[paravirt_opptr] "m" (pv_ops.op)
 
 int paravirt_disable_iospace(void);
 
-/*
- * This generates an indirect call based on the operation type number.
- * The type number, computed in PARAVIRT_PATCH, is derived from the
- * offset into the paravirt_patch_template structure, and can therefore be
- * freely converted back into a structure offset.
- */
+/* This generates an indirect call based on the operation type number. */
 #define PARAVIRT_CALL					\
 	ANNOTATE_RETPOLINE_SAFE				\
 	"call *%[paravirt_opptr];"
@@ -319,12 +279,6 @@ int paravirt_disable_iospace(void);
  * However, x86_64 also has to clobber all caller saved registers, which
  * unfortunately, are quite a bit (r8 - r11)
  *
- * The call instruction itself is marked by placing its start address
- * and size into the .parainstructions section, so that
- * apply_paravirt() in arch/i386/kernel/alternative.c can do the
- * appropriate patching under the control of the backend pv_init_ops
- * implementation.
- *
  * Unfortunately there's no way to get gcc to generate the args setup
  * for the call, and then allow the call itself to be generated by an
  * inline asm.  Because of this, we must do the complete arg setup and
@@ -423,14 +377,27 @@ int paravirt_disable_iospace(void);
 		__mask & __eax;						\
 	})
 
-
+/*
+ * Use alternative patching for paravirt calls:
+ * - For replacing an indirect call with a direct one, use the "normal"
+ *   ALTERNATIVE() macro with the indirect call as the initial code sequence,
+ *   which will be replaced with the related direct call by using the
+ *   ALT_FLAG_DIRECT_CALL special case and the "always on" feature.
+ * - In case the replacement is either a direct call or a short code sequence
+ *   depending on a feature bit, the ALTERNATIVE_2() macro is being used.
+ *   The indirect call is the initial code sequence again, while the special
+ *   code sequence is selected with the specified feature bit. In case the
+ *   feature is not active, the direct call is used as above via the
+ *   ALT_FLAG_DIRECT_CALL special case and the "always on" feature.
+ */
 #define ____PVOP_CALL(ret, op, call_clbr, extra_clbr, ...)	\
 	({								\
 		PVOP_CALL_ARGS;						\
 		PVOP_TEST_NULL(op);					\
-		asm volatile(paravirt_alt(PARAVIRT_CALL)		\
+		asm volatile(ALTERNATIVE(PARAVIRT_CALL, ALT_CALL_INSTR,	\
+				ALT_CALL_ALWAYS)			\
 			     : call_clbr, ASM_CALL_CONSTRAINT		\
-			     : paravirt_type(op),			\
+			     : paravirt_ptr(op),			\
 			       ##__VA_ARGS__				\
 			     : "memory", "cc" extra_clbr);		\
 		ret;							\
@@ -441,10 +408,11 @@ int paravirt_disable_iospace(void);
 	({								\
 		PVOP_CALL_ARGS;						\
 		PVOP_TEST_NULL(op);					\
-		asm volatile(ALTERNATIVE(paravirt_alt(PARAVIRT_CALL),	\
-					 alt, cond)			\
+		asm volatile(ALTERNATIVE_2(PARAVIRT_CALL,		\
+				 ALT_CALL_INSTR, ALT_CALL_ALWAYS,	\
+				 alt, cond)				\
 			     : call_clbr, ASM_CALL_CONSTRAINT		\
-			     : paravirt_type(op),			\
+			     : paravirt_ptr(op),			\
 			       ##__VA_ARGS__				\
 			     : "memory", "cc" extra_clbr);		\
 		ret;							\
@@ -542,8 +510,6 @@ int paravirt_disable_iospace(void);
 	__PVOP_VCALL(op, PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),	\
 		     PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
 
-void _paravirt_nop(void);
-void paravirt_BUG(void);
 unsigned long paravirt_ret0(void);
 #ifdef CONFIG_PARAVIRT_XXL
 u64 _paravirt_ident_64(u64);
@@ -553,11 +519,11 @@ void pv_native_irq_enable(void);
 unsigned long pv_native_read_cr2(void);
 #endif
 
-#define paravirt_nop	((void *)_paravirt_nop)
-
-extern struct paravirt_patch_site __parainstructions[],
-	__parainstructions_end[];
+#define paravirt_nop	((void *)nop_func)
 
 #endif	/* __ASSEMBLY__ */
+
+#define ALT_NOT_XEN	ALT_NOT(X86_FEATURE_XENPV)
+
 #endif  /* CONFIG_PARAVIRT */
 #endif	/* _ASM_X86_PARAVIRT_TYPES_H */
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 20624b80f890..5e01883eb51e 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -24,8 +24,8 @@
 
 #else /* ...!ASSEMBLY */
 
-#include <linux/kernel.h>
 #include <linux/stringify.h>
+#include <asm/asm.h>
 
 #ifdef CONFIG_SMP
 #define __percpu_prefix		"%%"__stringify(__percpu_seg)":"
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 2618ec7c3d1d..3736b8a46c04 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -31,6 +31,7 @@
 #define ARCH_PERFMON_EVENTSEL_ENABLE			(1ULL << 22)
 #define ARCH_PERFMON_EVENTSEL_INV			(1ULL << 23)
 #define ARCH_PERFMON_EVENTSEL_CMASK			0xFF000000ULL
+#define ARCH_PERFMON_EVENTSEL_BR_CNTR			(1ULL << 35)
 
 #define INTEL_FIXED_BITS_MASK				0xFULL
 #define INTEL_FIXED_BITS_STRIDE			4
@@ -223,6 +224,9 @@ union cpuid28_ecx {
 		unsigned int    lbr_timed_lbr:1;
 		/* Branch Type Field Supported */
 		unsigned int    lbr_br_type:1;
+		unsigned int	reserved:13;
+		/* Branch counters (Event Logging) Supported */
+		unsigned int	lbr_counters:4;
 	} split;
 	unsigned int            full;
 };
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 57bab91bbf50..9d077bca6a10 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -141,6 +141,7 @@ static inline int pte_young(pte_t pte)
 	return pte_flags(pte) & _PAGE_ACCESSED;
 }
 
+#define pmd_dirty pmd_dirty
 static inline bool pmd_dirty(pmd_t pmd)
 {
 	return pmd_flags(pmd) & _PAGE_DIRTY_BITS;
@@ -1679,12 +1680,6 @@ static inline bool arch_has_pfn_modify_check(void)
 	return boot_cpu_has_bug(X86_BUG_L1TF);
 }
 
-#define arch_has_hw_pte_young arch_has_hw_pte_young
-static inline bool arch_has_hw_pte_young(void)
-{
-	return true;
-}
-
 #define arch_check_zapped_pte arch_check_zapped_pte
 void arch_check_zapped_pte(struct vm_area_struct *vma, pte_t pte);
 
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index a629b1b9f65a..24af25b1551a 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -203,7 +203,7 @@ static inline void native_pgd_clear(pgd_t *pgd)
  * F (2) in swp entry is used to record when a pagetable is
  * writeprotected by userfaultfd WP support.
  *
- * E (3) in swp entry is used to rememeber PG_anon_exclusive.
+ * E (3) in swp entry is used to remember PG_anon_exclusive.
  *
  * Bit 7 in swp entry should be 0 because pmd_present checks not only P,
  * but also L and G.
diff --git a/arch/x86/include/asm/preempt.h b/arch/x86/include/asm/preempt.h
index 4527e1430c6d..af77235fded6 100644
--- a/arch/x86/include/asm/preempt.h
+++ b/arch/x86/include/asm/preempt.h
@@ -6,7 +6,6 @@
 #include <asm/percpu.h>
 #include <asm/current.h>
 
-#include <linux/thread_info.h>
 #include <linux/static_call_types.h>
 
 /* We use the MSB mostly because its available */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index ae81a7191c1c..26620d7642a9 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -749,4 +749,22 @@ enum mds_mitigations {
 
 extern bool gds_ucode_mitigated(void);
 
+/*
+ * Make previous memory operations globally visible before
+ * a WRMSR.
+ *
+ * MFENCE makes writes visible, but only affects load/store
+ * instructions.  WRMSR is unfortunately not a load/store
+ * instruction and is unaffected by MFENCE.  The LFENCE ensures
+ * that the WRMSR is not reordered.
+ *
+ * Most WRMSRs are full serializing instructions themselves and
+ * do not require this barrier.  This is only required for the
+ * IA32_TSC_DEADLINE and X2APIC MSRs.
+ */
+static inline void weak_wrmsr_fence(void)
+{
+	alternative("mfence; lfence", "", ALT_NOT(X86_FEATURE_APIC_MSRS_FENCE));
+}
+
 #endif /* _ASM_X86_PROCESSOR_H */
diff --git a/arch/x86/include/asm/qspinlock_paravirt.h b/arch/x86/include/asm/qspinlock_paravirt.h
index 85b6e3609cb9..ef9697f20129 100644
--- a/arch/x86/include/asm/qspinlock_paravirt.h
+++ b/arch/x86/include/asm/qspinlock_paravirt.h
@@ -56,8 +56,8 @@ __PV_CALLEE_SAVE_REGS_THUNK(__pv_queued_spin_unlock_slowpath, ".spinlock.text");
 	"pop    %rdx\n\t"						\
 	FRAME_END
 
-DEFINE_PARAVIRT_ASM(__raw_callee_save___pv_queued_spin_unlock,
-		    PV_UNLOCK_ASM, .spinlock.text);
+DEFINE_ASM_FUNC(__raw_callee_save___pv_queued_spin_unlock,
+		PV_UNLOCK_ASM, .spinlock.text);
 
 #else /* CONFIG_64BIT */
 
diff --git a/arch/x86/include/asm/rmwcc.h b/arch/x86/include/asm/rmwcc.h
index 4b081e0d3306..363266cbcada 100644
--- a/arch/x86/include/asm/rmwcc.h
+++ b/arch/x86/include/asm/rmwcc.h
@@ -13,7 +13,7 @@
 #define __GEN_RMWcc(fullop, _var, cc, clobbers, ...)			\
 ({									\
 	bool c = false;							\
-	asm_volatile_goto (fullop "; j" #cc " %l[cc_label]"		\
+	asm goto (fullop "; j" #cc " %l[cc_label]"		\
 			: : [var] "m" (_var), ## __VA_ARGS__		\
 			: clobbers : cc_label);				\
 	if (0) {							\
diff --git a/arch/x86/include/asm/set_memory.h b/arch/x86/include/asm/set_memory.h
index a5e89641bd2d..9aee31862b4a 100644
--- a/arch/x86/include/asm/set_memory.h
+++ b/arch/x86/include/asm/set_memory.h
@@ -47,6 +47,7 @@ int set_memory_uc(unsigned long addr, int numpages);
 int set_memory_wc(unsigned long addr, int numpages);
 int set_memory_wb(unsigned long addr, int numpages);
 int set_memory_np(unsigned long addr, int numpages);
+int set_memory_p(unsigned long addr, int numpages);
 int set_memory_4k(unsigned long addr, int numpages);
 int set_memory_encrypted(unsigned long addr, int numpages);
 int set_memory_decrypted(unsigned long addr, int numpages);
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index bf483fcb4e57..5c83729c8e71 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -31,8 +31,6 @@
 #include <asm/bootparam.h>
 #include <asm/x86_init.h>
 
-extern u64 relocated_ramdisk;
-
 /* Interrupt control for vSMPowered x86_64 systems */
 #ifdef CONFIG_X86_64
 void vsmp_init(void);
diff --git a/arch/x86/include/asm/shared/tdx.h b/arch/x86/include/asm/shared/tdx.h
index ccce7ebd8677..fdfd41511b02 100644
--- a/arch/x86/include/asm/shared/tdx.h
+++ b/arch/x86/include/asm/shared/tdx.h
@@ -55,6 +55,12 @@
 	(TDX_RDX | TDX_RBX | TDX_RSI | TDX_RDI | TDX_R8  | TDX_R9  | \
 	 TDX_R10 | TDX_R11 | TDX_R12 | TDX_R13 | TDX_R14 | TDX_R15)
 
+/* TDX supported page sizes from the TDX module ABI. */
+#define TDX_PS_4K	0
+#define TDX_PS_2M	1
+#define TDX_PS_1G	2
+#define TDX_PS_NR	(TDX_PS_1G + 1)
+
 #ifndef __ASSEMBLY__
 
 #include <linux/compiler_attributes.h>
diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
index d6cd9344f6c7..48f8dd47cf68 100644
--- a/arch/x86/include/asm/special_insns.h
+++ b/arch/x86/include/asm/special_insns.h
@@ -205,7 +205,7 @@ static inline void clwb(volatile void *__p)
 #ifdef CONFIG_X86_USER_SHADOW_STACK
 static inline int write_user_shstk_64(u64 __user *addr, u64 val)
 {
-	asm_volatile_goto("1: wrussq %[val], (%[addr])\n"
+	asm goto("1: wrussq %[val], (%[addr])\n"
 			  _ASM_EXTABLE(1b, %l[fail])
 			  :: [addr] "r" (addr), [val] "r" (val)
 			  :: fail);
diff --git a/arch/x86/include/asm/syscall_wrapper.h b/arch/x86/include/asm/syscall_wrapper.h
index 21f9407be5d3..7e88705e907f 100644
--- a/arch/x86/include/asm/syscall_wrapper.h
+++ b/arch/x86/include/asm/syscall_wrapper.h
@@ -58,12 +58,29 @@ extern long __ia32_sys_ni_syscall(const struct pt_regs *regs);
 		,,regs->di,,regs->si,,regs->dx				\
 		,,regs->r10,,regs->r8,,regs->r9)			\
 
+
+/* SYSCALL_PT_ARGS is Adapted from s390x */
+#define SYSCALL_PT_ARG6(m, t1, t2, t3, t4, t5, t6)			\
+	SYSCALL_PT_ARG5(m, t1, t2, t3, t4, t5), m(t6, (regs->bp))
+#define SYSCALL_PT_ARG5(m, t1, t2, t3, t4, t5)				\
+	SYSCALL_PT_ARG4(m, t1, t2, t3, t4),  m(t5, (regs->di))
+#define SYSCALL_PT_ARG4(m, t1, t2, t3, t4)				\
+	SYSCALL_PT_ARG3(m, t1, t2, t3),  m(t4, (regs->si))
+#define SYSCALL_PT_ARG3(m, t1, t2, t3)					\
+	SYSCALL_PT_ARG2(m, t1, t2), m(t3, (regs->dx))
+#define SYSCALL_PT_ARG2(m, t1, t2)					\
+	SYSCALL_PT_ARG1(m, t1), m(t2, (regs->cx))
+#define SYSCALL_PT_ARG1(m, t1) m(t1, (regs->bx))
+#define SYSCALL_PT_ARGS(x, ...) SYSCALL_PT_ARG##x(__VA_ARGS__)
+
+#define __SC_COMPAT_CAST(t, a)						\
+	(__typeof(__builtin_choose_expr(__TYPE_IS_L(t), 0, 0U)))	\
+	(unsigned int)a
+
 /* Mapping of registers to parameters for syscalls on i386 */
 #define SC_IA32_REGS_TO_ARGS(x, ...)					\
-	__MAP(x,__SC_ARGS						\
-	      ,,(unsigned int)regs->bx,,(unsigned int)regs->cx		\
-	      ,,(unsigned int)regs->dx,,(unsigned int)regs->si		\
-	      ,,(unsigned int)regs->di,,(unsigned int)regs->bp)
+	SYSCALL_PT_ARGS(x, __SC_COMPAT_CAST,				\
+			__MAP(x, __SC_TYPE, __VA_ARGS__))		\
 
 #define __SYS_STUB0(abi, name)						\
 	long __##abi##_##name(const struct pt_regs *regs);		\
diff --git a/arch/x86/include/asm/tdx.h b/arch/x86/include/asm/tdx.h
index f3d5305a60fc..eba178996d84 100644
--- a/arch/x86/include/asm/tdx.h
+++ b/arch/x86/include/asm/tdx.h
@@ -24,8 +24,16 @@
 #define TDX_SEAMCALL_GP			(TDX_SW_ERROR | X86_TRAP_GP)
 #define TDX_SEAMCALL_UD			(TDX_SW_ERROR | X86_TRAP_UD)
 
+/*
+ * TDX module SEAMCALL leaf function error codes
+ */
+#define TDX_SUCCESS		0ULL
+#define TDX_RND_NO_ENTROPY	0x8000020300000000ULL
+
 #ifndef __ASSEMBLY__
 
+#include <uapi/asm/mce.h>
+
 /*
  * Used by the #VE exception handler to gather the #VE exception
  * info from the TDX module. This is a software only structure
@@ -83,6 +91,36 @@ static inline long tdx_kvm_hypercall(unsigned int nr, unsigned long p1,
 u64 __seamcall(u64 fn, struct tdx_module_args *args);
 u64 __seamcall_ret(u64 fn, struct tdx_module_args *args);
 u64 __seamcall_saved_ret(u64 fn, struct tdx_module_args *args);
+void tdx_init(void);
+
+#include <asm/archrandom.h>
+
+typedef u64 (*sc_func_t)(u64 fn, struct tdx_module_args *args);
+
+static inline u64 sc_retry(sc_func_t func, u64 fn,
+			   struct tdx_module_args *args)
+{
+	int retry = RDRAND_RETRY_LOOPS;
+	u64 ret;
+
+	do {
+		ret = func(fn, args);
+	} while (ret == TDX_RND_NO_ENTROPY && --retry);
+
+	return ret;
+}
+
+#define seamcall(_fn, _args)		sc_retry(__seamcall, (_fn), (_args))
+#define seamcall_ret(_fn, _args)	sc_retry(__seamcall_ret, (_fn), (_args))
+#define seamcall_saved_ret(_fn, _args)	sc_retry(__seamcall_saved_ret, (_fn), (_args))
+int tdx_cpu_enable(void);
+int tdx_enable(void);
+const char *tdx_dump_mce_info(struct mce *m);
+#else
+static inline void tdx_init(void) { }
+static inline int tdx_cpu_enable(void) { return -ENODEV; }
+static inline int tdx_enable(void)  { return -ENODEV; }
+static inline const char *tdx_dump_mce_info(struct mce *m) { return NULL; }
 #endif	/* CONFIG_INTEL_TDX_HOST */
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/text-patching.h b/arch/x86/include/asm/text-patching.h
index 29832c338cdc..0b70653a98c1 100644
--- a/arch/x86/include/asm/text-patching.h
+++ b/arch/x86/include/asm/text-patching.h
@@ -6,18 +6,6 @@
 #include <linux/stddef.h>
 #include <asm/ptrace.h>
 
-struct paravirt_patch_site;
-#ifdef CONFIG_PARAVIRT
-void apply_paravirt(struct paravirt_patch_site *start,
-		    struct paravirt_patch_site *end);
-#else
-static inline void apply_paravirt(struct paravirt_patch_site *start,
-				  struct paravirt_patch_site *end)
-{}
-#define __parainstructions	NULL
-#define __parainstructions_end	NULL
-#endif
-
 /*
  * Currently, the max observed size in the kernel code is
  * JUMP_LABEL_NOP_SIZE/RELATIVEJUMP_SIZE, which are 5.
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index b1c9cea6ba88..1f1deaecd364 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -14,7 +14,6 @@
 asmlinkage __visible notrace struct pt_regs *sync_regs(struct pt_regs *eregs);
 asmlinkage __visible notrace
 struct pt_regs *fixup_bad_iret(struct pt_regs *bad_regs);
-void __init trap_init(void);
 asmlinkage __visible noinstr struct pt_regs *vc_switch_off_ist(struct pt_regs *eregs);
 #endif
 
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 5c367c1290c3..237dc8cdd12b 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -133,7 +133,7 @@ extern int __get_user_bad(void);
 
 #ifdef CONFIG_X86_32
 #define __put_user_goto_u64(x, addr, label)			\
-	asm_volatile_goto("\n"					\
+	asm goto("\n"					\
 		     "1:	movl %%eax,0(%1)\n"		\
 		     "2:	movl %%edx,4(%1)\n"		\
 		     _ASM_EXTABLE_UA(1b, %l2)			\
@@ -295,7 +295,7 @@ do {									\
 } while (0)
 
 #define __get_user_asm(x, addr, itype, ltype, label)			\
-	asm_volatile_goto("\n"						\
+	asm_goto_output("\n"						\
 		     "1:	mov"itype" %[umem],%[output]\n"		\
 		     _ASM_EXTABLE_UA(1b, %l2)				\
 		     : [output] ltype(x)				\
@@ -375,7 +375,7 @@ do {									\
 	__typeof__(_ptr) _old = (__typeof__(_ptr))(_pold);		\
 	__typeof__(*(_ptr)) __old = *_old;				\
 	__typeof__(*(_ptr)) __new = (_new);				\
-	asm_volatile_goto("\n"						\
+	asm_goto_output("\n"						\
 		     "1: " LOCK_PREFIX "cmpxchg"itype" %[new], %[ptr]\n"\
 		     _ASM_EXTABLE_UA(1b, %l[label])			\
 		     : CC_OUT(z) (success),				\
@@ -394,7 +394,7 @@ do {									\
 	__typeof__(_ptr) _old = (__typeof__(_ptr))(_pold);		\
 	__typeof__(*(_ptr)) __old = *_old;				\
 	__typeof__(*(_ptr)) __new = (_new);				\
-	asm_volatile_goto("\n"						\
+	asm_goto_output("\n"						\
 		     "1: " LOCK_PREFIX "cmpxchg8b %[ptr]\n"		\
 		     _ASM_EXTABLE_UA(1b, %l[label])			\
 		     : CC_OUT(z) (success),				\
@@ -477,7 +477,7 @@ struct __large_struct { unsigned long buf[100]; };
  * aliasing issues.
  */
 #define __put_user_goto(x, addr, itype, ltype, label)			\
-	asm_volatile_goto("\n"						\
+	asm goto("\n"							\
 		"1:	mov"itype" %0,%1\n"				\
 		_ASM_EXTABLE_UA(1b, %l2)				\
 		: : ltype(x), "m" (__m(addr))				\
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 5fa76c2ced51..ea877fd83114 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -653,7 +653,7 @@ static inline int uv_blade_to_node(int blade)
 	return uv_socket_to_node(blade);
 }
 
-/* Blade number of current cpu. Numnbered 0 .. <#blades -1> */
+/* Blade number of current cpu. Numbered 0 .. <#blades -1> */
 static inline int uv_numa_blade_id(void)
 {
 	return uv_hub_info->numa_blade_id;
diff --git a/arch/x86/include/asm/vdso/gettimeofday.h b/arch/x86/include/asm/vdso/gettimeofday.h
index c81858d903dc..8e048ca980df 100644
--- a/arch/x86/include/asm/vdso/gettimeofday.h
+++ b/arch/x86/include/asm/vdso/gettimeofday.h
@@ -321,7 +321,7 @@ static __always_inline
 u64 vdso_calc_delta(u64 cycles, u64 last, u64 mask, u32 mult)
 {
 	/*
-	 * Due to the MSB/Sign-bit being used as invald marker (see
+	 * Due to the MSB/Sign-bit being used as invalid marker (see
 	 * arch_vdso_cycles_valid() above), the effective mask is S64_MAX.
 	 */
 	u64 delta = (cycles - last) & S64_MAX;
@@ -337,8 +337,6 @@ u64 vdso_calc_delta(u64 cycles, u64 last, u64 mask, u32 mult)
 }
 #define vdso_calc_delta vdso_calc_delta
 
-int __vdso_clock_gettime64(clockid_t clock, struct __kernel_timespec *ts);
-
 #endif /* !__ASSEMBLY__ */
 
 #endif /* __ASM_VDSO_GETTIMEOFDAY_H */
diff --git a/arch/x86/include/asm/vsyscall.h b/arch/x86/include/asm/vsyscall.h
index ab60a71a8dcb..472f0263dbc6 100644
--- a/arch/x86/include/asm/vsyscall.h
+++ b/arch/x86/include/asm/vsyscall.h
@@ -4,6 +4,7 @@
 
 #include <linux/seqlock.h>
 #include <uapi/asm/vsyscall.h>
+#include <asm/page_types.h>
 
 #ifdef CONFIG_X86_VSYSCALL_EMULATION
 extern void map_vsyscall(void);
@@ -24,4 +25,13 @@ static inline bool emulate_vsyscall(unsigned long error_code,
 }
 #endif
 
+/*
+ * The (legacy) vsyscall page is the long page in the kernel portion
+ * of the address space that has user-accessible permissions.
+ */
+static inline bool is_vsyscall_vaddr(unsigned long vaddr)
+{
+	return unlikely((vaddr & PAGE_MASK) == VSYSCALL_ADDR);
+}
+
 #endif /* _ASM_X86_VSYSCALL_H */
diff --git a/arch/x86/include/asm/xen/interface_64.h b/arch/x86/include/asm/xen/interface_64.h
index c599ec269a25..c10f279aae93 100644
--- a/arch/x86/include/asm/xen/interface_64.h
+++ b/arch/x86/include/asm/xen/interface_64.h
@@ -61,7 +61,7 @@
  *   RING1 -> RING3 kernel mode.
  *   RING2 -> RING3 kernel mode.
  *   RING3 -> RING3 user mode.
- * However RING0 indicates that the guest kernel should return to iteself
+ * However RING0 indicates that the guest kernel should return to itself
  * directly with
  *      orb   $3,1*8(%rsp)
  *      iretq
diff --git a/arch/x86/include/uapi/asm/amd_hsmp.h b/arch/x86/include/uapi/asm/amd_hsmp.h
index fce22686c834..e5d182c7373c 100644
--- a/arch/x86/include/uapi/asm/amd_hsmp.h
+++ b/arch/x86/include/uapi/asm/amd_hsmp.h
@@ -238,7 +238,7 @@ static const struct hsmp_msg_desc hsmp_msg_desc_table[] = {
 	/*
 	 * HSMP_GET_DIMM_THERMAL, num_args = 1, response_sz = 1
 	 * input: args[0] = DIMM address[7:0]
-	 * output: args[0] = temperature in degree celcius[31:21] + update rate in ms[16:8] +
+	 * output: args[0] = temperature in degree celsius[31:21] + update rate in ms[16:8] +
 	 * DIMM address[7:0]
 	 */
 	{1, 1, HSMP_GET},
diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h
index 1a6a1f987949..a448d0964fc0 100644
--- a/arch/x86/include/uapi/asm/kvm.h
+++ b/arch/x86/include/uapi/asm/kvm.h
@@ -562,4 +562,7 @@ struct kvm_pmu_event_filter {
 /* x86-specific KVM_EXIT_HYPERCALL flags. */
 #define KVM_EXIT_HYPERCALL_LONG_MODE	BIT(0)
 
+#define KVM_X86_DEFAULT_VM	0
+#define KVM_X86_SW_PROTECTED_VM	1
+
 #endif /* _ASM_X86_KVM_H */
diff --git a/arch/x86/include/uapi/asm/signal.h b/arch/x86/include/uapi/asm/signal.h
index 777c3a0f4e23..f777346450ec 100644
--- a/arch/x86/include/uapi/asm/signal.h
+++ b/arch/x86/include/uapi/asm/signal.h
@@ -4,7 +4,6 @@
 
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
-#include <linux/time.h>
 #include <linux/compiler.h>
 
 /* Avoid too many header ordering problems.  */
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index aae7456ece07..1d85cb7071cb 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -30,6 +30,7 @@
 #include <asm/fixmap.h>
 #include <asm/paravirt.h>
 #include <asm/asm-prototypes.h>
+#include <asm/cfi.h>
 
 int __read_mostly alternatives_patched;
 
@@ -160,7 +161,6 @@ extern s32 __retpoline_sites[], __retpoline_sites_end[];
 extern s32 __return_sites[], __return_sites_end[];
 extern s32 __cfi_sites[], __cfi_sites_end[];
 extern s32 __ibt_endbr_seal[], __ibt_endbr_seal_end[];
-extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
 extern s32 __smp_locks[], __smp_locks_end[];
 void text_poke_early(void *addr, const void *opcode, size_t len);
 
@@ -395,6 +395,63 @@ apply_relocation(u8 *buf, size_t len, u8 *dest, u8 *src, size_t src_len)
 	}
 }
 
+/* Low-level backend functions usable from alternative code replacements. */
+DEFINE_ASM_FUNC(nop_func, "", .entry.text);
+EXPORT_SYMBOL_GPL(nop_func);
+
+noinstr void BUG_func(void)
+{
+	BUG();
+}
+EXPORT_SYMBOL(BUG_func);
+
+#define CALL_RIP_REL_OPCODE	0xff
+#define CALL_RIP_REL_MODRM	0x15
+
+/*
+ * Rewrite the "call BUG_func" replacement to point to the target of the
+ * indirect pv_ops call "call *disp(%ip)".
+ */
+static int alt_replace_call(u8 *instr, u8 *insn_buff, struct alt_instr *a)
+{
+	void *target, *bug = &BUG_func;
+	s32 disp;
+
+	if (a->replacementlen != 5 || insn_buff[0] != CALL_INSN_OPCODE) {
+		pr_err("ALT_FLAG_DIRECT_CALL set for a non-call replacement instruction\n");
+		BUG();
+	}
+
+	if (a->instrlen != 6 ||
+	    instr[0] != CALL_RIP_REL_OPCODE ||
+	    instr[1] != CALL_RIP_REL_MODRM) {
+		pr_err("ALT_FLAG_DIRECT_CALL set for unrecognized indirect call\n");
+		BUG();
+	}
+
+	/* Skip CALL_RIP_REL_OPCODE and CALL_RIP_REL_MODRM */
+	disp = *(s32 *)(instr + 2);
+#ifdef CONFIG_X86_64
+	/* ff 15 00 00 00 00   call   *0x0(%rip) */
+	/* target address is stored at "next instruction + disp". */
+	target = *(void **)(instr + a->instrlen + disp);
+#else
+	/* ff 15 00 00 00 00   call   *0x0 */
+	/* target address is stored at disp. */
+	target = *(void **)disp;
+#endif
+	if (!target)
+		target = bug;
+
+	/* (BUG_func - .) + (target - BUG_func) := target - . */
+	*(s32 *)(insn_buff + 1) += target - bug;
+
+	if (target == &nop_func)
+		return 0;
+
+	return 5;
+}
+
 /*
  * Replace instructions with better alternatives for this CPU type. This runs
  * before SMP is initialized to avoid SMP problems with self modifying code.
@@ -452,16 +509,21 @@ void __init_or_module noinline apply_alternatives(struct alt_instr *start,
 			continue;
 		}
 
-		DPRINTK(ALT, "feat: %s%d*32+%d, old: (%pS (%px) len: %d), repl: (%px, len: %d)",
-			(a->flags & ALT_FLAG_NOT) ? "!" : "",
+		DPRINTK(ALT, "feat: %d*32+%d, old: (%pS (%px) len: %d), repl: (%px, len: %d) flags: 0x%x",
 			a->cpuid >> 5,
 			a->cpuid & 0x1f,
 			instr, instr, a->instrlen,
-			replacement, a->replacementlen);
+			replacement, a->replacementlen, a->flags);
 
 		memcpy(insn_buff, replacement, a->replacementlen);
 		insn_buff_sz = a->replacementlen;
 
+		if (a->flags & ALT_FLAG_DIRECT_CALL) {
+			insn_buff_sz = alt_replace_call(instr, insn_buff, a);
+			if (insn_buff_sz < 0)
+				continue;
+		}
+
 		for (; insn_buff_sz < a->instrlen; insn_buff_sz++)
 			insn_buff[insn_buff_sz] = 0x90;
 
@@ -842,15 +904,82 @@ void __init_or_module apply_seal_endbr(s32 *start, s32 *end) { }
 #endif /* CONFIG_X86_KERNEL_IBT */
 
 #ifdef CONFIG_FINEIBT
+#define __CFI_DEFAULT	CFI_DEFAULT
+#elif defined(CONFIG_CFI_CLANG)
+#define __CFI_DEFAULT	CFI_KCFI
+#else
+#define __CFI_DEFAULT	CFI_OFF
+#endif
 
-enum cfi_mode {
-	CFI_DEFAULT,
-	CFI_OFF,
-	CFI_KCFI,
-	CFI_FINEIBT,
-};
+enum cfi_mode cfi_mode __ro_after_init = __CFI_DEFAULT;
+
+#ifdef CONFIG_CFI_CLANG
+struct bpf_insn;
+
+/* Must match bpf_func_t / DEFINE_BPF_PROG_RUN() */
+extern unsigned int __bpf_prog_runX(const void *ctx,
+				    const struct bpf_insn *insn);
+
+/*
+ * Force a reference to the external symbol so the compiler generates
+ * __kcfi_typid.
+ */
+__ADDRESSABLE(__bpf_prog_runX);
+
+/* u32 __ro_after_init cfi_bpf_hash = __kcfi_typeid___bpf_prog_runX; */
+asm (
+"	.pushsection	.data..ro_after_init,\"aw\",@progbits	\n"
+"	.type	cfi_bpf_hash,@object				\n"
+"	.globl	cfi_bpf_hash					\n"
+"	.p2align	2, 0x0					\n"
+"cfi_bpf_hash:							\n"
+"	.long	__kcfi_typeid___bpf_prog_runX			\n"
+"	.size	cfi_bpf_hash, 4					\n"
+"	.popsection						\n"
+);
+
+/* Must match bpf_callback_t */
+extern u64 __bpf_callback_fn(u64, u64, u64, u64, u64);
+
+__ADDRESSABLE(__bpf_callback_fn);
+
+/* u32 __ro_after_init cfi_bpf_subprog_hash = __kcfi_typeid___bpf_callback_fn; */
+asm (
+"	.pushsection	.data..ro_after_init,\"aw\",@progbits	\n"
+"	.type	cfi_bpf_subprog_hash,@object			\n"
+"	.globl	cfi_bpf_subprog_hash				\n"
+"	.p2align	2, 0x0					\n"
+"cfi_bpf_subprog_hash:						\n"
+"	.long	__kcfi_typeid___bpf_callback_fn			\n"
+"	.size	cfi_bpf_subprog_hash, 4				\n"
+"	.popsection						\n"
+);
+
+u32 cfi_get_func_hash(void *func)
+{
+	u32 hash;
+
+	func -= cfi_get_offset();
+	switch (cfi_mode) {
+	case CFI_FINEIBT:
+		func += 7;
+		break;
+	case CFI_KCFI:
+		func += 1;
+		break;
+	default:
+		return 0;
+	}
+
+	if (get_kernel_nofault(hash, func))
+		return 0;
+
+	return hash;
+}
+#endif
+
+#ifdef CONFIG_FINEIBT
 
-static enum cfi_mode cfi_mode __ro_after_init = CFI_DEFAULT;
 static bool cfi_rand __ro_after_init = true;
 static u32  cfi_seed __ro_after_init;
 
@@ -1159,8 +1288,11 @@ static void __apply_fineibt(s32 *start_retpoline, s32 *end_retpoline,
 		goto err;
 
 	if (cfi_rand) {
-		if (builtin)
+		if (builtin) {
 			cfi_seed = get_random_u32();
+			cfi_bpf_hash = cfi_rehash(cfi_bpf_hash);
+			cfi_bpf_subprog_hash = cfi_rehash(cfi_bpf_subprog_hash);
+		}
 
 		ret = cfi_rand_preamble(start_cfi, end_cfi);
 		if (ret)
@@ -1421,46 +1553,6 @@ int alternatives_text_reserved(void *start, void *end)
 }
 #endif /* CONFIG_SMP */
 
-#ifdef CONFIG_PARAVIRT
-
-/* Use this to add nops to a buffer, then text_poke the whole buffer. */
-static void __init_or_module add_nops(void *insns, unsigned int len)
-{
-	while (len > 0) {
-		unsigned int noplen = len;
-		if (noplen > ASM_NOP_MAX)
-			noplen = ASM_NOP_MAX;
-		memcpy(insns, x86_nops[noplen], noplen);
-		insns += noplen;
-		len -= noplen;
-	}
-}
-
-void __init_or_module apply_paravirt(struct paravirt_patch_site *start,
-				     struct paravirt_patch_site *end)
-{
-	struct paravirt_patch_site *p;
-	char insn_buff[MAX_PATCH_LEN];
-
-	for (p = start; p < end; p++) {
-		unsigned int used;
-
-		BUG_ON(p->len > MAX_PATCH_LEN);
-		/* prep the buffer with the original instructions */
-		memcpy(insn_buff, p->instr, p->len);
-		used = paravirt_patch(p->type, insn_buff, (unsigned long)p->instr, p->len);
-
-		BUG_ON(used > p->len);
-
-		/* Pad the rest with nops */
-		add_nops(insn_buff + used, p->len - used);
-		text_poke_early(p->instr, insn_buff, p->len);
-	}
-}
-extern struct paravirt_patch_site __start_parainstructions[],
-	__stop_parainstructions[];
-#endif	/* CONFIG_PARAVIRT */
-
 /*
  * Self-test for the INT3 based CALL emulation code.
  *
@@ -1596,28 +1688,11 @@ void __init alternative_instructions(void)
 	 */
 
 	/*
-	 * Paravirt patching and alternative patching can be combined to
-	 * replace a function call with a short direct code sequence (e.g.
-	 * by setting a constant return value instead of doing that in an
-	 * external function).
-	 * In order to make this work the following sequence is required:
-	 * 1. set (artificial) features depending on used paravirt
-	 *    functions which can later influence alternative patching
-	 * 2. apply paravirt patching (generally replacing an indirect
-	 *    function call with a direct one)
-	 * 3. apply alternative patching (e.g. replacing a direct function
-	 *    call with a custom code sequence)
-	 * Doing paravirt patching after alternative patching would clobber
-	 * the optimization of the custom code with a function call again.
+	 * Make sure to set (artificial) features depending on used paravirt
+	 * functions which can later influence alternative patching.
 	 */
 	paravirt_set_cap();
 
-	/*
-	 * First patch paravirt functions, such that we overwrite the indirect
-	 * call with the direct call.
-	 */
-	apply_paravirt(__parainstructions, __parainstructions_end);
-
 	__apply_fineibt(__retpoline_sites, __retpoline_sites_end,
 			__cfi_sites, __cfi_sites_end, true);
 
@@ -1628,10 +1703,6 @@ void __init alternative_instructions(void)
 	apply_retpolines(__retpoline_sites, __retpoline_sites_end);
 	apply_returns(__return_sites, __return_sites_end);
 
-	/*
-	 * Then patch alternatives, such that those paravirt calls that are in
-	 * alternatives can be overwritten by their immediate fragments.
-	 */
 	apply_alternatives(__alt_instructions, __alt_instructions_end);
 
 	/*
@@ -1906,7 +1977,7 @@ static void *__text_poke(text_poke_f func, void *addr, const void *src, size_t l
  * Note that the caller must ensure that if the modified code is part of a
  * module, the module would not be removed during poking. This can be achieved
  * by registering a module notifier, and ordering module removal and patching
- * trough a mutex.
+ * through a mutex.
  */
 void *text_poke(void *addr, const void *opcode, size_t len)
 {
diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c
index 56a917df410d..2ae98f754e59 100644
--- a/arch/x86/kernel/amd_gart_64.c
+++ b/arch/x86/kernel/amd_gart_64.c
@@ -776,7 +776,7 @@ int __init gart_iommu_init(void)
 				iommu_size >> PAGE_SHIFT);
 	/*
 	 * Tricky. The GART table remaps the physical memory range,
-	 * so the CPU wont notice potential aliases and if the memory
+	 * so the CPU won't notice potential aliases and if the memory
 	 * is remapped to UC later on, we might surprise the PCI devices
 	 * with a stray writeout of a cacheline. So play it sure and
 	 * do an explicit, full-scale wbinvd() _after_ having marked all
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 4feaa670d578..89c0c8a3fc7e 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -259,10 +259,9 @@ static u32 __init search_agp_bridge(u32 *order, int *valid_agp)
 							order);
 				}
 
-				/* No multi-function device? */
 				type = read_pci_config_byte(bus, slot, func,
 							       PCI_HEADER_TYPE);
-				if (!(type & 0x80))
+				if (!(type & PCI_HEADER_TYPE_MFD))
 					break;
 			}
 		}
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index 2ee867d796d9..3bf0487cf3b7 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -4,7 +4,7 @@
 #
 
 # Leads to non-deterministic coverage that is not a function of syscall inputs.
-# In particualr, smp_apic_timer_interrupt() is called in random places.
+# In particular, smp_apic_timer_interrupt() is called in random places.
 KCOV_INSTRUMENT		:= n
 
 obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_common.o apic_noop.o ipi.o vector.o init.o
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 41093cf20acd..4667bc4b00ab 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -782,7 +782,7 @@ bool __init apic_needs_pit(void)
 
 	/*
 	 * If interrupt delivery mode is legacy PIC or virtual wire without
-	 * configuration, the local APIC timer wont be set up. Make sure
+	 * configuration, the local APIC timer won't be set up. Make sure
 	 * that the PIT is initialized.
 	 */
 	if (apic_intr_mode == APIC_PIC ||
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 7139867d69cd..b295a056a4fc 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -82,7 +82,6 @@ static struct apic apic_flat __ro_after_init = {
 	.acpi_madt_oem_check		= flat_acpi_madt_oem_check,
 	.apic_id_registered		= default_apic_id_registered,
 
-	.delivery_mode			= APIC_DELIVERY_MODE_FIXED,
 	.dest_mode_logical		= true,
 
 	.disable_esr			= 0,
@@ -154,7 +153,6 @@ static struct apic apic_physflat __ro_after_init = {
 	.acpi_madt_oem_check		= physflat_acpi_madt_oem_check,
 	.apic_id_registered		= default_apic_id_registered,
 
-	.delivery_mode			= APIC_DELIVERY_MODE_FIXED,
 	.dest_mode_logical		= false,
 
 	.disable_esr			= 0,
diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c
index b00d52ae84fa..9f1d553eb48f 100644
--- a/arch/x86/kernel/apic/apic_noop.c
+++ b/arch/x86/kernel/apic/apic_noop.c
@@ -47,7 +47,6 @@ static void noop_apic_write(u32 reg, u32 val)
 struct apic apic_noop __ro_after_init = {
 	.name				= "noop",
 
-	.delivery_mode			= APIC_DELIVERY_MODE_FIXED,
 	.dest_mode_logical		= true,
 
 	.disable_esr			= 0,
diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c
index 456a14c44f67..7d0c51b9d3bc 100644
--- a/arch/x86/kernel/apic/apic_numachip.c
+++ b/arch/x86/kernel/apic/apic_numachip.c
@@ -222,7 +222,6 @@ static const struct apic apic_numachip1 __refconst = {
 	.probe				= numachip1_probe,
 	.acpi_madt_oem_check		= numachip1_acpi_madt_oem_check,
 
-	.delivery_mode			= APIC_DELIVERY_MODE_FIXED,
 	.dest_mode_logical		= false,
 
 	.disable_esr			= 0,
@@ -259,7 +258,6 @@ static const struct apic apic_numachip2 __refconst = {
 	.probe				= numachip2_probe,
 	.acpi_madt_oem_check		= numachip2_acpi_madt_oem_check,
 
-	.delivery_mode			= APIC_DELIVERY_MODE_FIXED,
 	.dest_mode_logical		= false,
 
 	.disable_esr			= 0,
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index 7ee3c486cb33..5a0d60b38e6b 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -80,7 +80,6 @@ static struct apic apic_bigsmp __ro_after_init = {
 	.name				= "bigsmp",
 	.probe				= probe_bigsmp,
 
-	.delivery_mode			= APIC_DELIVERY_MODE_FIXED,
 	.dest_mode_logical		= false,
 
 	.disable_esr			= 1,
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 00da6cf6b07d..40c7cf180c20 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -997,7 +997,7 @@ static int alloc_isa_irq_from_domain(struct irq_domain *domain,
 	/*
 	 * Legacy ISA IRQ has already been allocated, just add pin to
 	 * the pin list associated with this IRQ and program the IOAPIC
-	 * entry. The IOAPIC entry
+	 * entry.
 	 */
 	if (irq_data && irq_data->parent_data) {
 		if (!mp_check_pin_attr(irq, info))
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 5eb3fbe472da..c0f78059f06a 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -45,7 +45,6 @@ static struct apic apic_default __ro_after_init = {
 	.probe				= probe_default,
 	.apic_id_registered		= default_apic_id_registered,
 
-	.delivery_mode			= APIC_DELIVERY_MODE_FIXED,
 	.dest_mode_logical		= true,
 
 	.disable_esr			= 0,
diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index 319448d87b99..185738c72766 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -738,8 +738,8 @@ int __init arch_probe_nr_irqs(void)
 void lapic_assign_legacy_vector(unsigned int irq, bool replace)
 {
 	/*
-	 * Use assign system here so it wont get accounted as allocated
-	 * and moveable in the cpu hotplug check and it prevents managed
+	 * Use assign system here so it won't get accounted as allocated
+	 * and movable in the cpu hotplug check and it prevents managed
 	 * irq reservation from touching it.
 	 */
 	irq_matrix_assign_system(vector_matrix, ISA_IRQ_VECTOR(irq), replace);
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index a8306089c91b..28a7d3f2312d 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -227,7 +227,6 @@ static struct apic apic_x2apic_cluster __ro_after_init = {
 	.probe				= x2apic_cluster_probe,
 	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
 
-	.delivery_mode			= APIC_DELIVERY_MODE_FIXED,
 	.dest_mode_logical		= true,
 
 	.disable_esr			= 0,
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index 558a4a8824f4..409815a40668 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -145,7 +145,6 @@ static struct apic apic_x2apic_phys __ro_after_init = {
 	.probe				= x2apic_phys_probe,
 	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
 
-	.delivery_mode			= APIC_DELIVERY_MODE_FIXED,
 	.dest_mode_logical		= false,
 
 	.disable_esr			= 0,
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 1b0d7336a28f..f1766b18dcd0 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -805,7 +805,6 @@ static struct apic apic_x2apic_uv_x __ro_after_init = {
 	.probe				= uv_probe,
 	.acpi_madt_oem_check		= uv_acpi_madt_oem_check,
 
-	.delivery_mode			= APIC_DELIVERY_MODE_FIXED,
 	.dest_mode_logical		= false,
 
 	.disable_esr			= 0,
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 5934ee5bc087..76a5ced278c2 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -420,7 +420,7 @@ static DEFINE_MUTEX(apm_mutex);
  * This is for buggy BIOS's that refer to (real mode) segment 0x40
  * even though they are called in protected mode.
  */
-static struct desc_struct bad_bios_desc = GDT_ENTRY_INIT(0x4092,
+static struct desc_struct bad_bios_desc = GDT_ENTRY_INIT(DESC_DATA32_BIOS,
 			(unsigned long)__va(0x400UL), PAGE_SIZE - 0x400 - 1);
 
 static const char driver_version[] = "1.16ac";	/* no spaces */
diff --git a/arch/x86/kernel/callthunks.c b/arch/x86/kernel/callthunks.c
index e9ad518a5003..64ad2ddea121 100644
--- a/arch/x86/kernel/callthunks.c
+++ b/arch/x86/kernel/callthunks.c
@@ -233,14 +233,13 @@ patch_call_sites(s32 *start, s32 *end, const struct core_text *ct)
 }
 
 static __init_or_module void
-patch_paravirt_call_sites(struct paravirt_patch_site *start,
-			  struct paravirt_patch_site *end,
-			  const struct core_text *ct)
+patch_alt_call_sites(struct alt_instr *start, struct alt_instr *end,
+		     const struct core_text *ct)
 {
-	struct paravirt_patch_site *p;
+	struct alt_instr *a;
 
-	for (p = start; p < end; p++)
-		patch_call(p->instr, ct);
+	for (a = start; a < end; a++)
+		patch_call((void *)&a->instr_offset + a->instr_offset, ct);
 }
 
 static __init_or_module void
@@ -248,7 +247,7 @@ callthunks_setup(struct callthunk_sites *cs, const struct core_text *ct)
 {
 	prdbg("Patching call sites %s\n", ct->name);
 	patch_call_sites(cs->call_start, cs->call_end, ct);
-	patch_paravirt_call_sites(cs->pv_start, cs->pv_end, ct);
+	patch_alt_call_sites(cs->alt_start, cs->alt_end, ct);
 	prdbg("Patching call sites done%s\n", ct->name);
 }
 
@@ -257,8 +256,8 @@ void __init callthunks_patch_builtin_calls(void)
 	struct callthunk_sites cs = {
 		.call_start	= __call_sites,
 		.call_end	= __call_sites_end,
-		.pv_start	= __parainstructions,
-		.pv_end		= __parainstructions_end
+		.alt_start	= __alt_instructions,
+		.alt_end	= __alt_instructions_end
 	};
 
 	if (!cpu_feature_enabled(X86_FEATURE_CALL_DEPTH))
diff --git a/arch/x86/kernel/cfi.c b/arch/x86/kernel/cfi.c
index 8674a5c0c031..e6bf78fac146 100644
--- a/arch/x86/kernel/cfi.c
+++ b/arch/x86/kernel/cfi.c
@@ -4,10 +4,10 @@
  *
  * Copyright (C) 2022 Google LLC
  */
-#include <asm/cfi.h>
+#include <linux/string.h>
+#include <linux/cfi.h>
 #include <asm/insn.h>
 #include <asm/insn-eval.h>
-#include <linux/string.h>
 
 /*
  * Returns the target address and the expected type when regs->ip points
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index f322ebd053a9..f3abca334199 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -34,87 +34,6 @@
  */
 static u32 nodes_per_socket = 1;
 
-/*
- * AMD errata checking
- *
- * Errata are defined as arrays of ints using the AMD_LEGACY_ERRATUM() or
- * AMD_OSVW_ERRATUM() macros. The latter is intended for newer errata that
- * have an OSVW id assigned, which it takes as first argument. Both take a
- * variable number of family-specific model-stepping ranges created by
- * AMD_MODEL_RANGE().
- *
- * Example:
- *
- * const int amd_erratum_319[] =
- *	AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0x4, 0x2),
- *			   AMD_MODEL_RANGE(0x10, 0x8, 0x0, 0x8, 0x0),
- *			   AMD_MODEL_RANGE(0x10, 0x9, 0x0, 0x9, 0x0));
- */
-
-#define AMD_LEGACY_ERRATUM(...)		{ -1, __VA_ARGS__, 0 }
-#define AMD_OSVW_ERRATUM(osvw_id, ...)	{ osvw_id, __VA_ARGS__, 0 }
-#define AMD_MODEL_RANGE(f, m_start, s_start, m_end, s_end) \
-	((f << 24) | (m_start << 16) | (s_start << 12) | (m_end << 4) | (s_end))
-#define AMD_MODEL_RANGE_FAMILY(range)	(((range) >> 24) & 0xff)
-#define AMD_MODEL_RANGE_START(range)	(((range) >> 12) & 0xfff)
-#define AMD_MODEL_RANGE_END(range)	((range) & 0xfff)
-
-static const int amd_erratum_400[] =
-	AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0xf, 0x41, 0x2, 0xff, 0xf),
-			    AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0xff, 0xf));
-
-static const int amd_erratum_383[] =
-	AMD_OSVW_ERRATUM(3, AMD_MODEL_RANGE(0x10, 0, 0, 0xff, 0xf));
-
-/* #1054: Instructions Retired Performance Counter May Be Inaccurate */
-static const int amd_erratum_1054[] =
-	AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x17, 0, 0, 0x2f, 0xf));
-
-static const int amd_zenbleed[] =
-	AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x17, 0x30, 0x0, 0x4f, 0xf),
-			   AMD_MODEL_RANGE(0x17, 0x60, 0x0, 0x7f, 0xf),
-			   AMD_MODEL_RANGE(0x17, 0x90, 0x0, 0x91, 0xf),
-			   AMD_MODEL_RANGE(0x17, 0xa0, 0x0, 0xaf, 0xf));
-
-static const int amd_div0[] =
-	AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x17, 0x00, 0x0, 0x2f, 0xf),
-			   AMD_MODEL_RANGE(0x17, 0x50, 0x0, 0x5f, 0xf));
-
-static const int amd_erratum_1485[] =
-	AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x19, 0x10, 0x0, 0x1f, 0xf),
-			   AMD_MODEL_RANGE(0x19, 0x60, 0x0, 0xaf, 0xf));
-
-static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum)
-{
-	int osvw_id = *erratum++;
-	u32 range;
-	u32 ms;
-
-	if (osvw_id >= 0 && osvw_id < 65536 &&
-	    cpu_has(cpu, X86_FEATURE_OSVW)) {
-		u64 osvw_len;
-
-		rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, osvw_len);
-		if (osvw_id < osvw_len) {
-			u64 osvw_bits;
-
-			rdmsrl(MSR_AMD64_OSVW_STATUS + (osvw_id >> 6),
-			    osvw_bits);
-			return osvw_bits & (1ULL << (osvw_id & 0x3f));
-		}
-	}
-
-	/* OSVW unavailable or ID unknown, match family-model-stepping range */
-	ms = (cpu->x86_model << 4) | cpu->x86_stepping;
-	while ((range = *erratum++))
-		if ((cpu->x86 == AMD_MODEL_RANGE_FAMILY(range)) &&
-		    (ms >= AMD_MODEL_RANGE_START(range)) &&
-		    (ms <= AMD_MODEL_RANGE_END(range)))
-			return true;
-
-	return false;
-}
-
 static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
 {
 	u32 gprs[8] = { 0 };
@@ -616,6 +535,62 @@ static void bsp_init_amd(struct cpuinfo_x86 *c)
 	}
 
 	resctrl_cpu_detect(c);
+
+	/* Figure out Zen generations: */
+	switch (c->x86) {
+	case 0x17:
+		switch (c->x86_model) {
+		case 0x00 ... 0x2f:
+		case 0x50 ... 0x5f:
+			setup_force_cpu_cap(X86_FEATURE_ZEN1);
+			break;
+		case 0x30 ... 0x4f:
+		case 0x60 ... 0x7f:
+		case 0x90 ... 0x91:
+		case 0xa0 ... 0xaf:
+			setup_force_cpu_cap(X86_FEATURE_ZEN2);
+			break;
+		default:
+			goto warn;
+		}
+		break;
+
+	case 0x19:
+		switch (c->x86_model) {
+		case 0x00 ... 0x0f:
+		case 0x20 ... 0x5f:
+			setup_force_cpu_cap(X86_FEATURE_ZEN3);
+			break;
+		case 0x10 ... 0x1f:
+		case 0x60 ... 0xaf:
+			setup_force_cpu_cap(X86_FEATURE_ZEN4);
+			break;
+		default:
+			goto warn;
+		}
+		break;
+
+	case 0x1a:
+		switch (c->x86_model) {
+		case 0x00 ... 0x0f:
+		case 0x20 ... 0x2f:
+		case 0x40 ... 0x4f:
+		case 0x70 ... 0x7f:
+			setup_force_cpu_cap(X86_FEATURE_ZEN5);
+			break;
+		default:
+			goto warn;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	return;
+
+warn:
+	WARN_ONCE(1, "Family 0x%x, model: 0x%x??\n", c->x86, c->x86_model);
 }
 
 static void early_detect_mem_encrypt(struct cpuinfo_x86 *c)
@@ -739,15 +714,6 @@ static void early_init_amd(struct cpuinfo_x86 *c)
 	if (c->x86 == 0x16 && c->x86_model <= 0xf)
 		msr_set_bit(MSR_AMD64_LS_CFG, 15);
 
-	/*
-	 * Check whether the machine is affected by erratum 400. This is
-	 * used to select the proper idle routine and to enable the check
-	 * whether the machine is affected in arch_post_acpi_init(), which
-	 * sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
-	 */
-	if (cpu_has_amd_erratum(c, amd_erratum_400))
-		set_cpu_bug(c, X86_BUG_AMD_E400);
-
 	early_detect_mem_encrypt(c);
 
 	/* Re-enable TopologyExtensions if switched off by BIOS */
@@ -814,6 +780,16 @@ static void init_amd_k8(struct cpuinfo_x86 *c)
 	msr_set_bit(MSR_K7_HWCR, 6);
 #endif
 	set_cpu_bug(c, X86_BUG_SWAPGS_FENCE);
+
+	/*
+	 * Check models and steppings affected by erratum 400. This is
+	 * used to select the proper idle routine and to enable the
+	 * check whether the machine is affected in arch_post_acpi_subsys_init()
+	 * which sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
+	 */
+	if (c->x86_model > 0x41 ||
+	    (c->x86_model == 0x41 && c->x86_stepping >= 0x2))
+		setup_force_cpu_bug(X86_BUG_AMD_E400);
 }
 
 static void init_amd_gh(struct cpuinfo_x86 *c)
@@ -847,8 +823,17 @@ static void init_amd_gh(struct cpuinfo_x86 *c)
 	 */
 	msr_clear_bit(MSR_AMD64_BU_CFG2, 24);
 
-	if (cpu_has_amd_erratum(c, amd_erratum_383))
-		set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH);
+	set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH);
+
+	/*
+	 * Check models and steppings affected by erratum 400. This is
+	 * used to select the proper idle routine and to enable the
+	 * check whether the machine is affected in arch_post_acpi_subsys_init()
+	 * which sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
+	 */
+	if (c->x86_model > 0x2 ||
+	    (c->x86_model == 0x2 && c->x86_stepping >= 0x1))
+		setup_force_cpu_bug(X86_BUG_AMD_E400);
 }
 
 static void init_amd_ln(struct cpuinfo_x86 *c)
@@ -941,6 +926,19 @@ static void init_amd_bd(struct cpuinfo_x86 *c)
 	clear_rdrand_cpuid_bit(c);
 }
 
+static void fix_erratum_1386(struct cpuinfo_x86 *c)
+{
+	/*
+	 * Work around Erratum 1386.  The XSAVES instruction malfunctions in
+	 * certain circumstances on Zen1/2 uarch, and not all parts have had
+	 * updated microcode at the time of writing (March 2023).
+	 *
+	 * Affected parts all have no supervisor XSAVE states, meaning that
+	 * the XSAVEC instruction (which works fine) is equivalent.
+	 */
+	clear_cpu_cap(c, X86_FEATURE_XSAVES);
+}
+
 void init_spectral_chicken(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_CPU_UNRET_ENTRY
@@ -951,34 +949,28 @@ void init_spectral_chicken(struct cpuinfo_x86 *c)
 	 *
 	 * This suppresses speculation from the middle of a basic block, i.e. it
 	 * suppresses non-branch predictions.
-	 *
-	 * We use STIBP as a heuristic to filter out Zen2 from the rest of F17H
 	 */
-	if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && cpu_has(c, X86_FEATURE_AMD_STIBP)) {
+	if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) {
 		if (!rdmsrl_safe(MSR_ZEN2_SPECTRAL_CHICKEN, &value)) {
 			value |= MSR_ZEN2_SPECTRAL_CHICKEN_BIT;
 			wrmsrl_safe(MSR_ZEN2_SPECTRAL_CHICKEN, value);
 		}
 	}
 #endif
-	/*
-	 * Work around Erratum 1386.  The XSAVES instruction malfunctions in
-	 * certain circumstances on Zen1/2 uarch, and not all parts have had
-	 * updated microcode at the time of writing (March 2023).
-	 *
-	 * Affected parts all have no supervisor XSAVE states, meaning that
-	 * the XSAVEC instruction (which works fine) is equivalent.
-	 */
-	clear_cpu_cap(c, X86_FEATURE_XSAVES);
 }
 
-static void init_amd_zn(struct cpuinfo_x86 *c)
+static void init_amd_zen_common(void)
 {
-	set_cpu_cap(c, X86_FEATURE_ZEN);
-
+	setup_force_cpu_cap(X86_FEATURE_ZEN);
 #ifdef CONFIG_NUMA
 	node_reclaim_distance = 32;
 #endif
+}
+
+static void init_amd_zen1(struct cpuinfo_x86 *c)
+{
+	init_amd_zen_common();
+	fix_erratum_1386(c);
 
 	/* Fix up CPUID bits, but only if not virtualised. */
 	if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) {
@@ -986,15 +978,10 @@ static void init_amd_zn(struct cpuinfo_x86 *c)
 		/* Erratum 1076: CPB feature bit not being set in CPUID. */
 		if (!cpu_has(c, X86_FEATURE_CPB))
 			set_cpu_cap(c, X86_FEATURE_CPB);
-
-		/*
-		 * Zen3 (Fam19 model < 0x10) parts are not susceptible to
-		 * Branch Type Confusion, but predate the allocation of the
-		 * BTC_NO bit.
-		 */
-		if (c->x86 == 0x19 && !cpu_has(c, X86_FEATURE_BTC_NO))
-			set_cpu_cap(c, X86_FEATURE_BTC_NO);
 	}
+
+	pr_notice_once("AMD Zen1 DIV0 bug detected. Disable SMT for full protection.\n");
+	setup_force_cpu_bug(X86_BUG_DIV0);
 }
 
 static bool cpu_has_zenbleed_microcode(void)
@@ -1018,11 +1005,8 @@ static bool cpu_has_zenbleed_microcode(void)
 	return true;
 }
 
-static void zenbleed_check(struct cpuinfo_x86 *c)
+static void zen2_zenbleed_check(struct cpuinfo_x86 *c)
 {
-	if (!cpu_has_amd_erratum(c, amd_zenbleed))
-		return;
-
 	if (cpu_has(c, X86_FEATURE_HYPERVISOR))
 		return;
 
@@ -1037,6 +1021,42 @@ static void zenbleed_check(struct cpuinfo_x86 *c)
 	}
 }
 
+static void init_amd_zen2(struct cpuinfo_x86 *c)
+{
+	init_amd_zen_common();
+	init_spectral_chicken(c);
+	fix_erratum_1386(c);
+	zen2_zenbleed_check(c);
+}
+
+static void init_amd_zen3(struct cpuinfo_x86 *c)
+{
+	init_amd_zen_common();
+
+	if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) {
+		/*
+		 * Zen3 (Fam19 model < 0x10) parts are not susceptible to
+		 * Branch Type Confusion, but predate the allocation of the
+		 * BTC_NO bit.
+		 */
+		if (!cpu_has(c, X86_FEATURE_BTC_NO))
+			set_cpu_cap(c, X86_FEATURE_BTC_NO);
+	}
+}
+
+static void init_amd_zen4(struct cpuinfo_x86 *c)
+{
+	init_amd_zen_common();
+
+	if (!cpu_has(c, X86_FEATURE_HYPERVISOR))
+		msr_set_bit(MSR_ZEN4_BP_CFG, MSR_ZEN4_BP_CFG_SHARED_BTB_FIX_BIT);
+}
+
+static void init_amd_zen5(struct cpuinfo_x86 *c)
+{
+	init_amd_zen_common();
+}
+
 static void init_amd(struct cpuinfo_x86 *c)
 {
 	u64 vm_cr;
@@ -1072,11 +1092,19 @@ static void init_amd(struct cpuinfo_x86 *c)
 	case 0x12: init_amd_ln(c); break;
 	case 0x15: init_amd_bd(c); break;
 	case 0x16: init_amd_jg(c); break;
-	case 0x17: init_spectral_chicken(c);
-		   fallthrough;
-	case 0x19: init_amd_zn(c); break;
 	}
 
+	if (boot_cpu_has(X86_FEATURE_ZEN1))
+		init_amd_zen1(c);
+	else if (boot_cpu_has(X86_FEATURE_ZEN2))
+		init_amd_zen2(c);
+	else if (boot_cpu_has(X86_FEATURE_ZEN3))
+		init_amd_zen3(c);
+	else if (boot_cpu_has(X86_FEATURE_ZEN4))
+		init_amd_zen4(c);
+	else if (boot_cpu_has(X86_FEATURE_ZEN5))
+		init_amd_zen5(c);
+
 	/*
 	 * Enable workaround for FXSAVE leak on CPUs
 	 * without a XSaveErPtr feature
@@ -1136,7 +1164,7 @@ static void init_amd(struct cpuinfo_x86 *c)
 	 * Counter May Be Inaccurate".
 	 */
 	if (cpu_has(c, X86_FEATURE_IRPERF) &&
-	    !cpu_has_amd_erratum(c, amd_erratum_1054))
+	    (boot_cpu_has(X86_FEATURE_ZEN1) && c->x86_model > 0x2f))
 		msr_set_bit(MSR_K7_HWCR, MSR_K7_HWCR_IRPERF_EN_BIT);
 
 	check_null_seg_clears_base(c);
@@ -1152,16 +1180,8 @@ static void init_amd(struct cpuinfo_x86 *c)
 	    cpu_has(c, X86_FEATURE_AUTOIBRS))
 		WARN_ON_ONCE(msr_set_bit(MSR_EFER, _EFER_AUTOIBRS));
 
-	zenbleed_check(c);
-
-	if (cpu_has_amd_erratum(c, amd_div0)) {
-		pr_notice_once("AMD Zen1 DIV0 bug detected. Disable SMT for full protection.\n");
-		setup_force_cpu_bug(X86_BUG_DIV0);
-	}
-
-	if (!cpu_has(c, X86_FEATURE_HYPERVISOR) &&
-	     cpu_has_amd_erratum(c, amd_erratum_1485))
-		msr_set_bit(MSR_ZEN4_BP_CFG, MSR_ZEN4_BP_CFG_SHARED_BTB_FIX_BIT);
+	/* AMD CPUs don't need fencing after x2APIC/TSC_DEADLINE MSR writes. */
+	clear_cpu_cap(c, X86_FEATURE_APIC_MSRS_FENCE);
 }
 
 #ifdef CONFIG_X86_32
@@ -1315,7 +1335,7 @@ static void zenbleed_check_cpu(void *unused)
 {
 	struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
 
-	zenbleed_check(c);
+	zen2_zenbleed_check(c);
 }
 
 void amd_check_microcode(void)
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index bb0ab8466b91..48d049cd74e7 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -111,9 +111,6 @@ DEFINE_STATIC_KEY_FALSE(switch_mm_cond_ibpb);
 /* Control unconditional IBPB in switch_mm() */
 DEFINE_STATIC_KEY_FALSE(switch_mm_always_ibpb);
 
-/* Control MDS CPU buffer clear before returning to user space */
-DEFINE_STATIC_KEY_FALSE(mds_user_clear);
-EXPORT_SYMBOL_GPL(mds_user_clear);
 /* Control MDS CPU buffer clear before idling (halt, mwait) */
 DEFINE_STATIC_KEY_FALSE(mds_idle_clear);
 EXPORT_SYMBOL_GPL(mds_idle_clear);
@@ -252,7 +249,7 @@ static void __init mds_select_mitigation(void)
 		if (!boot_cpu_has(X86_FEATURE_MD_CLEAR))
 			mds_mitigation = MDS_MITIGATION_VMWERV;
 
-		static_branch_enable(&mds_user_clear);
+		setup_force_cpu_cap(X86_FEATURE_CLEAR_CPU_BUF);
 
 		if (!boot_cpu_has(X86_BUG_MSBDS_ONLY) &&
 		    (mds_nosmt || cpu_mitigations_auto_nosmt()))
@@ -356,7 +353,7 @@ static void __init taa_select_mitigation(void)
 	 * For guests that can't determine whether the correct microcode is
 	 * present on host, enable the mitigation for UCODE_NEEDED as well.
 	 */
-	static_branch_enable(&mds_user_clear);
+	setup_force_cpu_cap(X86_FEATURE_CLEAR_CPU_BUF);
 
 	if (taa_nosmt || cpu_mitigations_auto_nosmt())
 		cpu_smt_disable(false);
@@ -424,7 +421,7 @@ static void __init mmio_select_mitigation(void)
 	 */
 	if (boot_cpu_has_bug(X86_BUG_MDS) || (boot_cpu_has_bug(X86_BUG_TAA) &&
 					      boot_cpu_has(X86_FEATURE_RTM)))
-		static_branch_enable(&mds_user_clear);
+		setup_force_cpu_cap(X86_FEATURE_CLEAR_CPU_BUF);
 	else
 		static_branch_enable(&mmio_stale_data_clear);
 
@@ -484,12 +481,12 @@ static void __init md_clear_update_mitigation(void)
 	if (cpu_mitigations_off())
 		return;
 
-	if (!static_key_enabled(&mds_user_clear))
+	if (!boot_cpu_has(X86_FEATURE_CLEAR_CPU_BUF))
 		goto out;
 
 	/*
-	 * mds_user_clear is now enabled. Update MDS, TAA and MMIO Stale Data
-	 * mitigation, if necessary.
+	 * X86_FEATURE_CLEAR_CPU_BUF is now enabled. Update MDS, TAA and MMIO
+	 * Stale Data mitigation, if necessary.
 	 */
 	if (mds_mitigation == MDS_MITIGATION_OFF &&
 	    boot_cpu_has_bug(X86_BUG_MDS)) {
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index b14fc8c1c953..fbc4e60d027c 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -66,6 +66,7 @@
 #include <asm/set_memory.h>
 #include <asm/traps.h>
 #include <asm/sev.h>
+#include <asm/tdx.h>
 
 #include "cpu.h"
 
@@ -188,45 +189,37 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 	 * TLS descriptors are currently at a different place compared to i386.
 	 * Hopefully nobody expects them at a fixed place (Wine?)
 	 */
-	[GDT_ENTRY_KERNEL32_CS]		= GDT_ENTRY_INIT(0xc09b, 0, 0xfffff),
-	[GDT_ENTRY_KERNEL_CS]		= GDT_ENTRY_INIT(0xa09b, 0, 0xfffff),
-	[GDT_ENTRY_KERNEL_DS]		= GDT_ENTRY_INIT(0xc093, 0, 0xfffff),
-	[GDT_ENTRY_DEFAULT_USER32_CS]	= GDT_ENTRY_INIT(0xc0fb, 0, 0xfffff),
-	[GDT_ENTRY_DEFAULT_USER_DS]	= GDT_ENTRY_INIT(0xc0f3, 0, 0xfffff),
-	[GDT_ENTRY_DEFAULT_USER_CS]	= GDT_ENTRY_INIT(0xa0fb, 0, 0xfffff),
+	[GDT_ENTRY_KERNEL32_CS]		= GDT_ENTRY_INIT(DESC_CODE32, 0, 0xfffff),
+	[GDT_ENTRY_KERNEL_CS]		= GDT_ENTRY_INIT(DESC_CODE64, 0, 0xfffff),
+	[GDT_ENTRY_KERNEL_DS]		= GDT_ENTRY_INIT(DESC_DATA64, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER32_CS]	= GDT_ENTRY_INIT(DESC_CODE32 | DESC_USER, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER_DS]	= GDT_ENTRY_INIT(DESC_DATA64 | DESC_USER, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER_CS]	= GDT_ENTRY_INIT(DESC_CODE64 | DESC_USER, 0, 0xfffff),
 #else
-	[GDT_ENTRY_KERNEL_CS]		= GDT_ENTRY_INIT(0xc09a, 0, 0xfffff),
-	[GDT_ENTRY_KERNEL_DS]		= GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
-	[GDT_ENTRY_DEFAULT_USER_CS]	= GDT_ENTRY_INIT(0xc0fa, 0, 0xfffff),
-	[GDT_ENTRY_DEFAULT_USER_DS]	= GDT_ENTRY_INIT(0xc0f2, 0, 0xfffff),
+	[GDT_ENTRY_KERNEL_CS]		= GDT_ENTRY_INIT(DESC_CODE32, 0, 0xfffff),
+	[GDT_ENTRY_KERNEL_DS]		= GDT_ENTRY_INIT(DESC_DATA32, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER_CS]	= GDT_ENTRY_INIT(DESC_CODE32 | DESC_USER, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER_DS]	= GDT_ENTRY_INIT(DESC_DATA32 | DESC_USER, 0, 0xfffff),
 	/*
 	 * Segments used for calling PnP BIOS have byte granularity.
 	 * They code segments and data segments have fixed 64k limits,
 	 * the transfer segment sizes are set at run time.
 	 */
-	/* 32-bit code */
-	[GDT_ENTRY_PNPBIOS_CS32]	= GDT_ENTRY_INIT(0x409a, 0, 0xffff),
-	/* 16-bit code */
-	[GDT_ENTRY_PNPBIOS_CS16]	= GDT_ENTRY_INIT(0x009a, 0, 0xffff),
-	/* 16-bit data */
-	[GDT_ENTRY_PNPBIOS_DS]		= GDT_ENTRY_INIT(0x0092, 0, 0xffff),
-	/* 16-bit data */
-	[GDT_ENTRY_PNPBIOS_TS1]		= GDT_ENTRY_INIT(0x0092, 0, 0),
-	/* 16-bit data */
-	[GDT_ENTRY_PNPBIOS_TS2]		= GDT_ENTRY_INIT(0x0092, 0, 0),
+	[GDT_ENTRY_PNPBIOS_CS32]	= GDT_ENTRY_INIT(DESC_CODE32_BIOS, 0, 0xffff),
+	[GDT_ENTRY_PNPBIOS_CS16]	= GDT_ENTRY_INIT(DESC_CODE16, 0, 0xffff),
+	[GDT_ENTRY_PNPBIOS_DS]		= GDT_ENTRY_INIT(DESC_DATA16, 0, 0xffff),
+	[GDT_ENTRY_PNPBIOS_TS1]		= GDT_ENTRY_INIT(DESC_DATA16, 0, 0),
+	[GDT_ENTRY_PNPBIOS_TS2]		= GDT_ENTRY_INIT(DESC_DATA16, 0, 0),
 	/*
 	 * The APM segments have byte granularity and their bases
 	 * are set at run time.  All have 64k limits.
 	 */
-	/* 32-bit code */
-	[GDT_ENTRY_APMBIOS_BASE]	= GDT_ENTRY_INIT(0x409a, 0, 0xffff),
-	/* 16-bit code */
-	[GDT_ENTRY_APMBIOS_BASE+1]	= GDT_ENTRY_INIT(0x009a, 0, 0xffff),
-	/* data */
-	[GDT_ENTRY_APMBIOS_BASE+2]	= GDT_ENTRY_INIT(0x4092, 0, 0xffff),
-
-	[GDT_ENTRY_ESPFIX_SS]		= GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
-	[GDT_ENTRY_PERCPU]		= GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
+	[GDT_ENTRY_APMBIOS_BASE]	= GDT_ENTRY_INIT(DESC_CODE32_BIOS, 0, 0xffff),
+	[GDT_ENTRY_APMBIOS_BASE+1]	= GDT_ENTRY_INIT(DESC_CODE16, 0, 0xffff),
+	[GDT_ENTRY_APMBIOS_BASE+2]	= GDT_ENTRY_INIT(DESC_DATA32_BIOS, 0, 0xffff),
+
+	[GDT_ENTRY_ESPFIX_SS]		= GDT_ENTRY_INIT(DESC_DATA32, 0, 0xfffff),
+	[GDT_ENTRY_PERCPU]		= GDT_ENTRY_INIT(DESC_DATA32, 0, 0xfffff),
 #endif
 } };
 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
@@ -1596,6 +1589,7 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 		get_cpu_vendor(c);
 		get_cpu_cap(c);
 		setup_force_cpu_cap(X86_FEATURE_CPUID);
+		get_cpu_address_sizes(c);
 		cpu_parse_early_param();
 
 		if (this_cpu->c_early_init)
@@ -1608,10 +1602,9 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 			this_cpu->c_bsp_init(c);
 	} else {
 		setup_clear_cpu_cap(X86_FEATURE_CPUID);
+		get_cpu_address_sizes(c);
 	}
 
-	get_cpu_address_sizes(c);
-
 	setup_force_cpu_cap(X86_FEATURE_ALWAYS);
 
 	cpu_set_bug_bits(c);
@@ -1856,6 +1849,13 @@ static void identify_cpu(struct cpuinfo_x86 *c)
 	c->topo.apicid = apic->phys_pkg_id(c->topo.initial_apicid, 0);
 #endif
 
+
+	/*
+	 * Set default APIC and TSC_DEADLINE MSR fencing flag. AMD and
+	 * Hygon will clear it in ->c_init() below.
+	 */
+	set_cpu_cap(c, X86_FEATURE_APIC_MSRS_FENCE);
+
 	/*
 	 * Vendor-specific initialization.  In this section we
 	 * canonicalize the feature flags, meaning if there are
@@ -1987,6 +1987,7 @@ static __init void identify_boot_cpu(void)
 	setup_cr_pinning();
 
 	tsx_init();
+	tdx_init();
 	lkgs_init();
 }
 
diff --git a/arch/x86/kernel/cpu/hygon.c b/arch/x86/kernel/cpu/hygon.c
index 6f247d66758d..f0cd95502faa 100644
--- a/arch/x86/kernel/cpu/hygon.c
+++ b/arch/x86/kernel/cpu/hygon.c
@@ -354,6 +354,9 @@ static void init_hygon(struct cpuinfo_x86 *c)
 		set_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
 
 	check_null_seg_clears_base(c);
+
+	/* Hygon CPUs don't need fencing after x2APIC/TSC_DEADLINE MSR writes. */
+	clear_cpu_cap(c, X86_FEATURE_APIC_MSRS_FENCE);
 }
 
 static void cpu_detect_tlb_hygon(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index a927a8fc9624..40dec9b56f87 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -184,6 +184,90 @@ static bool bad_spectre_microcode(struct cpuinfo_x86 *c)
 	return false;
 }
 
+#define MSR_IA32_TME_ACTIVATE		0x982
+
+/* Helpers to access TME_ACTIVATE MSR */
+#define TME_ACTIVATE_LOCKED(x)		(x & 0x1)
+#define TME_ACTIVATE_ENABLED(x)		(x & 0x2)
+
+#define TME_ACTIVATE_POLICY(x)		((x >> 4) & 0xf)	/* Bits 7:4 */
+#define TME_ACTIVATE_POLICY_AES_XTS_128	0
+
+#define TME_ACTIVATE_KEYID_BITS(x)	((x >> 32) & 0xf)	/* Bits 35:32 */
+
+#define TME_ACTIVATE_CRYPTO_ALGS(x)	((x >> 48) & 0xffff)	/* Bits 63:48 */
+#define TME_ACTIVATE_CRYPTO_AES_XTS_128	1
+
+/* Values for mktme_status (SW only construct) */
+#define MKTME_ENABLED			0
+#define MKTME_DISABLED			1
+#define MKTME_UNINITIALIZED		2
+static int mktme_status = MKTME_UNINITIALIZED;
+
+static void detect_tme_early(struct cpuinfo_x86 *c)
+{
+	u64 tme_activate, tme_policy, tme_crypto_algs;
+	int keyid_bits = 0, nr_keyids = 0;
+	static u64 tme_activate_cpu0 = 0;
+
+	rdmsrl(MSR_IA32_TME_ACTIVATE, tme_activate);
+
+	if (mktme_status != MKTME_UNINITIALIZED) {
+		if (tme_activate != tme_activate_cpu0) {
+			/* Broken BIOS? */
+			pr_err_once("x86/tme: configuration is inconsistent between CPUs\n");
+			pr_err_once("x86/tme: MKTME is not usable\n");
+			mktme_status = MKTME_DISABLED;
+
+			/* Proceed. We may need to exclude bits from x86_phys_bits. */
+		}
+	} else {
+		tme_activate_cpu0 = tme_activate;
+	}
+
+	if (!TME_ACTIVATE_LOCKED(tme_activate) || !TME_ACTIVATE_ENABLED(tme_activate)) {
+		pr_info_once("x86/tme: not enabled by BIOS\n");
+		mktme_status = MKTME_DISABLED;
+		return;
+	}
+
+	if (mktme_status != MKTME_UNINITIALIZED)
+		goto detect_keyid_bits;
+
+	pr_info("x86/tme: enabled by BIOS\n");
+
+	tme_policy = TME_ACTIVATE_POLICY(tme_activate);
+	if (tme_policy != TME_ACTIVATE_POLICY_AES_XTS_128)
+		pr_warn("x86/tme: Unknown policy is active: %#llx\n", tme_policy);
+
+	tme_crypto_algs = TME_ACTIVATE_CRYPTO_ALGS(tme_activate);
+	if (!(tme_crypto_algs & TME_ACTIVATE_CRYPTO_AES_XTS_128)) {
+		pr_err("x86/mktme: No known encryption algorithm is supported: %#llx\n",
+				tme_crypto_algs);
+		mktme_status = MKTME_DISABLED;
+	}
+detect_keyid_bits:
+	keyid_bits = TME_ACTIVATE_KEYID_BITS(tme_activate);
+	nr_keyids = (1UL << keyid_bits) - 1;
+	if (nr_keyids) {
+		pr_info_once("x86/mktme: enabled by BIOS\n");
+		pr_info_once("x86/mktme: %d KeyIDs available\n", nr_keyids);
+	} else {
+		pr_info_once("x86/mktme: disabled by BIOS\n");
+	}
+
+	if (mktme_status == MKTME_UNINITIALIZED) {
+		/* MKTME is usable */
+		mktme_status = MKTME_ENABLED;
+	}
+
+	/*
+	 * KeyID bits effectively lower the number of physical address
+	 * bits.  Update cpuinfo_x86::x86_phys_bits accordingly.
+	 */
+	c->x86_phys_bits -= keyid_bits;
+}
+
 static void early_init_intel(struct cpuinfo_x86 *c)
 {
 	u64 misc_enable;
@@ -322,6 +406,13 @@ static void early_init_intel(struct cpuinfo_x86 *c)
 	 */
 	if (detect_extended_topology_early(c) < 0)
 		detect_ht_early(c);
+
+	/*
+	 * Adjust the number of physical bits early because it affects the
+	 * valid bits of the MTRR mask registers.
+	 */
+	if (cpu_has(c, X86_FEATURE_TME))
+		detect_tme_early(c);
 }
 
 static void bsp_init_intel(struct cpuinfo_x86 *c)
@@ -482,90 +573,6 @@ static void srat_detect_node(struct cpuinfo_x86 *c)
 #endif
 }
 
-#define MSR_IA32_TME_ACTIVATE		0x982
-
-/* Helpers to access TME_ACTIVATE MSR */
-#define TME_ACTIVATE_LOCKED(x)		(x & 0x1)
-#define TME_ACTIVATE_ENABLED(x)		(x & 0x2)
-
-#define TME_ACTIVATE_POLICY(x)		((x >> 4) & 0xf)	/* Bits 7:4 */
-#define TME_ACTIVATE_POLICY_AES_XTS_128	0
-
-#define TME_ACTIVATE_KEYID_BITS(x)	((x >> 32) & 0xf)	/* Bits 35:32 */
-
-#define TME_ACTIVATE_CRYPTO_ALGS(x)	((x >> 48) & 0xffff)	/* Bits 63:48 */
-#define TME_ACTIVATE_CRYPTO_AES_XTS_128	1
-
-/* Values for mktme_status (SW only construct) */
-#define MKTME_ENABLED			0
-#define MKTME_DISABLED			1
-#define MKTME_UNINITIALIZED		2
-static int mktme_status = MKTME_UNINITIALIZED;
-
-static void detect_tme(struct cpuinfo_x86 *c)
-{
-	u64 tme_activate, tme_policy, tme_crypto_algs;
-	int keyid_bits = 0, nr_keyids = 0;
-	static u64 tme_activate_cpu0 = 0;
-
-	rdmsrl(MSR_IA32_TME_ACTIVATE, tme_activate);
-
-	if (mktme_status != MKTME_UNINITIALIZED) {
-		if (tme_activate != tme_activate_cpu0) {
-			/* Broken BIOS? */
-			pr_err_once("x86/tme: configuration is inconsistent between CPUs\n");
-			pr_err_once("x86/tme: MKTME is not usable\n");
-			mktme_status = MKTME_DISABLED;
-
-			/* Proceed. We may need to exclude bits from x86_phys_bits. */
-		}
-	} else {
-		tme_activate_cpu0 = tme_activate;
-	}
-
-	if (!TME_ACTIVATE_LOCKED(tme_activate) || !TME_ACTIVATE_ENABLED(tme_activate)) {
-		pr_info_once("x86/tme: not enabled by BIOS\n");
-		mktme_status = MKTME_DISABLED;
-		return;
-	}
-
-	if (mktme_status != MKTME_UNINITIALIZED)
-		goto detect_keyid_bits;
-
-	pr_info("x86/tme: enabled by BIOS\n");
-
-	tme_policy = TME_ACTIVATE_POLICY(tme_activate);
-	if (tme_policy != TME_ACTIVATE_POLICY_AES_XTS_128)
-		pr_warn("x86/tme: Unknown policy is active: %#llx\n", tme_policy);
-
-	tme_crypto_algs = TME_ACTIVATE_CRYPTO_ALGS(tme_activate);
-	if (!(tme_crypto_algs & TME_ACTIVATE_CRYPTO_AES_XTS_128)) {
-		pr_err("x86/mktme: No known encryption algorithm is supported: %#llx\n",
-				tme_crypto_algs);
-		mktme_status = MKTME_DISABLED;
-	}
-detect_keyid_bits:
-	keyid_bits = TME_ACTIVATE_KEYID_BITS(tme_activate);
-	nr_keyids = (1UL << keyid_bits) - 1;
-	if (nr_keyids) {
-		pr_info_once("x86/mktme: enabled by BIOS\n");
-		pr_info_once("x86/mktme: %d KeyIDs available\n", nr_keyids);
-	} else {
-		pr_info_once("x86/mktme: disabled by BIOS\n");
-	}
-
-	if (mktme_status == MKTME_UNINITIALIZED) {
-		/* MKTME is usable */
-		mktme_status = MKTME_ENABLED;
-	}
-
-	/*
-	 * KeyID bits effectively lower the number of physical address
-	 * bits.  Update cpuinfo_x86::x86_phys_bits accordingly.
-	 */
-	c->x86_phys_bits -= keyid_bits;
-}
-
 static void init_cpuid_fault(struct cpuinfo_x86 *c)
 {
 	u64 msr;
@@ -702,9 +709,6 @@ static void init_intel(struct cpuinfo_x86 *c)
 
 	init_ia32_feat_ctl(c);
 
-	if (cpu_has(c, X86_FEATURE_TME))
-		detect_tme(c);
-
 	init_intel_misc_features(c);
 
 	split_lock_init();
diff --git a/arch/x86/kernel/cpu/intel_epb.c b/arch/x86/kernel/cpu/intel_epb.c
index e4c3ba91321c..f18d35fe27a9 100644
--- a/arch/x86/kernel/cpu/intel_epb.c
+++ b/arch/x86/kernel/cpu/intel_epb.c
@@ -237,4 +237,4 @@ err_out_online:
 	cpuhp_remove_state(CPUHP_AP_X86_INTEL_EPB_ONLINE);
 	return ret;
 }
-subsys_initcall(intel_epb_init);
+late_initcall(intel_epb_init);
diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index f3517b8a8e91..2b46eb0fdf3a 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -87,42 +87,40 @@ struct smca_bank {
 static DEFINE_PER_CPU_READ_MOSTLY(struct smca_bank[MAX_NR_BANKS], smca_banks);
 static DEFINE_PER_CPU_READ_MOSTLY(u8[N_SMCA_BANK_TYPES], smca_bank_counts);
 
-struct smca_bank_name {
-	const char *name;	/* Short name for sysfs */
-	const char *long_name;	/* Long name for pretty-printing */
-};
-
-static struct smca_bank_name smca_names[] = {
-	[SMCA_LS ... SMCA_LS_V2]	= { "load_store",	"Load Store Unit" },
-	[SMCA_IF]			= { "insn_fetch",	"Instruction Fetch Unit" },
-	[SMCA_L2_CACHE]			= { "l2_cache",		"L2 Cache" },
-	[SMCA_DE]			= { "decode_unit",	"Decode Unit" },
-	[SMCA_RESERVED]			= { "reserved",		"Reserved" },
-	[SMCA_EX]			= { "execution_unit",	"Execution Unit" },
-	[SMCA_FP]			= { "floating_point",	"Floating Point Unit" },
-	[SMCA_L3_CACHE]			= { "l3_cache",		"L3 Cache" },
-	[SMCA_CS ... SMCA_CS_V2]	= { "coherent_slave",	"Coherent Slave" },
-	[SMCA_PIE]			= { "pie",		"Power, Interrupts, etc." },
+static const char * const smca_names[] = {
+	[SMCA_LS ... SMCA_LS_V2]	= "load_store",
+	[SMCA_IF]			= "insn_fetch",
+	[SMCA_L2_CACHE]			= "l2_cache",
+	[SMCA_DE]			= "decode_unit",
+	[SMCA_RESERVED]			= "reserved",
+	[SMCA_EX]			= "execution_unit",
+	[SMCA_FP]			= "floating_point",
+	[SMCA_L3_CACHE]			= "l3_cache",
+	[SMCA_CS ... SMCA_CS_V2]	= "coherent_slave",
+	[SMCA_PIE]			= "pie",
 
 	/* UMC v2 is separate because both of them can exist in a single system. */
-	[SMCA_UMC]			= { "umc",		"Unified Memory Controller" },
-	[SMCA_UMC_V2]			= { "umc_v2",		"Unified Memory Controller v2" },
-	[SMCA_PB]			= { "param_block",	"Parameter Block" },
-	[SMCA_PSP ... SMCA_PSP_V2]	= { "psp",		"Platform Security Processor" },
-	[SMCA_SMU ... SMCA_SMU_V2]	= { "smu",		"System Management Unit" },
-	[SMCA_MP5]			= { "mp5",		"Microprocessor 5 Unit" },
-	[SMCA_MPDMA]			= { "mpdma",		"MPDMA Unit" },
-	[SMCA_NBIO]			= { "nbio",		"Northbridge IO Unit" },
-	[SMCA_PCIE ... SMCA_PCIE_V2]	= { "pcie",		"PCI Express Unit" },
-	[SMCA_XGMI_PCS]			= { "xgmi_pcs",		"Ext Global Memory Interconnect PCS Unit" },
-	[SMCA_NBIF]			= { "nbif",		"NBIF Unit" },
-	[SMCA_SHUB]			= { "shub",		"System Hub Unit" },
-	[SMCA_SATA]			= { "sata",		"SATA Unit" },
-	[SMCA_USB]			= { "usb",		"USB Unit" },
-	[SMCA_GMI_PCS]			= { "gmi_pcs",		"Global Memory Interconnect PCS Unit" },
-	[SMCA_XGMI_PHY]			= { "xgmi_phy",		"Ext Global Memory Interconnect PHY Unit" },
-	[SMCA_WAFL_PHY]			= { "wafl_phy",		"WAFL PHY Unit" },
-	[SMCA_GMI_PHY]			= { "gmi_phy",		"Global Memory Interconnect PHY Unit" },
+	[SMCA_UMC]			= "umc",
+	[SMCA_UMC_V2]			= "umc_v2",
+	[SMCA_MA_LLC]			= "ma_llc",
+	[SMCA_PB]			= "param_block",
+	[SMCA_PSP ... SMCA_PSP_V2]	= "psp",
+	[SMCA_SMU ... SMCA_SMU_V2]	= "smu",
+	[SMCA_MP5]			= "mp5",
+	[SMCA_MPDMA]			= "mpdma",
+	[SMCA_NBIO]			= "nbio",
+	[SMCA_PCIE ... SMCA_PCIE_V2]	= "pcie",
+	[SMCA_XGMI_PCS]			= "xgmi_pcs",
+	[SMCA_NBIF]			= "nbif",
+	[SMCA_SHUB]			= "shub",
+	[SMCA_SATA]			= "sata",
+	[SMCA_USB]			= "usb",
+	[SMCA_USR_DP]			= "usr_dp",
+	[SMCA_USR_CP]			= "usr_cp",
+	[SMCA_GMI_PCS]			= "gmi_pcs",
+	[SMCA_XGMI_PHY]			= "xgmi_phy",
+	[SMCA_WAFL_PHY]			= "wafl_phy",
+	[SMCA_GMI_PHY]			= "gmi_phy",
 };
 
 static const char *smca_get_name(enum smca_bank_types t)
@@ -130,17 +128,8 @@ static const char *smca_get_name(enum smca_bank_types t)
 	if (t >= N_SMCA_BANK_TYPES)
 		return NULL;
 
-	return smca_names[t].name;
-}
-
-const char *smca_get_long_name(enum smca_bank_types t)
-{
-	if (t >= N_SMCA_BANK_TYPES)
-		return NULL;
-
-	return smca_names[t].long_name;
+	return smca_names[t];
 }
-EXPORT_SYMBOL_GPL(smca_get_long_name);
 
 enum smca_bank_types smca_get_bank_type(unsigned int cpu, unsigned int bank)
 {
@@ -178,6 +167,7 @@ static const struct smca_hwid smca_hwid_mcatypes[] = {
 	{ SMCA_CS,	 HWID_MCATYPE(0x2E, 0x0)	},
 	{ SMCA_PIE,	 HWID_MCATYPE(0x2E, 0x1)	},
 	{ SMCA_CS_V2,	 HWID_MCATYPE(0x2E, 0x2)	},
+	{ SMCA_MA_LLC,	 HWID_MCATYPE(0x2E, 0x4)	},
 
 	/* Unified Memory Controller MCA type */
 	{ SMCA_UMC,	 HWID_MCATYPE(0x96, 0x0)	},
@@ -212,6 +202,8 @@ static const struct smca_hwid smca_hwid_mcatypes[] = {
 	{ SMCA_SHUB,	 HWID_MCATYPE(0x80, 0x0)	},
 	{ SMCA_SATA,	 HWID_MCATYPE(0xA8, 0x0)	},
 	{ SMCA_USB,	 HWID_MCATYPE(0xAA, 0x0)	},
+	{ SMCA_USR_DP,	 HWID_MCATYPE(0x170, 0x0)	},
+	{ SMCA_USR_CP,	 HWID_MCATYPE(0x180, 0x0)	},
 	{ SMCA_GMI_PCS,  HWID_MCATYPE(0x241, 0x0)	},
 	{ SMCA_XGMI_PHY, HWID_MCATYPE(0x259, 0x0)	},
 	{ SMCA_WAFL_PHY, HWID_MCATYPE(0x267, 0x0)	},
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 7b397370b4d6..bc39252bc54f 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -44,6 +44,7 @@
 #include <linux/sync_core.h>
 #include <linux/task_work.h>
 #include <linux/hardirq.h>
+#include <linux/kexec.h>
 
 #include <asm/intel-family.h>
 #include <asm/processor.h>
@@ -52,6 +53,7 @@
 #include <asm/mce.h>
 #include <asm/msr.h>
 #include <asm/reboot.h>
+#include <asm/tdx.h>
 
 #include "internal.h"
 
@@ -228,11 +230,20 @@ static void wait_for_panic(void)
 	panic("Panicing machine check CPU died");
 }
 
+static const char *mce_dump_aux_info(struct mce *m)
+{
+	if (boot_cpu_has_bug(X86_BUG_TDX_PW_MCE))
+		return tdx_dump_mce_info(m);
+
+	return NULL;
+}
+
 static noinstr void mce_panic(const char *msg, struct mce *final, char *exp)
 {
 	struct llist_node *pending;
 	struct mce_evt_llist *l;
 	int apei_err = 0;
+	const char *memmsg;
 
 	/*
 	 * Allow instrumentation around external facilities usage. Not that it
@@ -283,9 +294,29 @@ static noinstr void mce_panic(const char *msg, struct mce *final, char *exp)
 	}
 	if (exp)
 		pr_emerg(HW_ERR "Machine check: %s\n", exp);
+
+	memmsg = mce_dump_aux_info(final);
+	if (memmsg)
+		pr_emerg(HW_ERR "Machine check: %s\n", memmsg);
+
 	if (!fake_panic) {
 		if (panic_timeout == 0)
 			panic_timeout = mca_cfg.panic_timeout;
+
+		/*
+		 * Kdump skips the poisoned page in order to avoid
+		 * touching the error bits again. Poison the page even
+		 * if the error is fatal and the machine is about to
+		 * panic.
+		 */
+		if (kexec_crash_loaded()) {
+			if (final && (final->status & MCI_STATUS_ADDRV)) {
+				struct page *p;
+				p = pfn_to_online_page(final->addr >> PAGE_SHIFT);
+				if (p)
+					SetPageHWPoison(p);
+			}
+		}
 		panic(msg);
 	} else
 		pr_emerg(HW_ERR "Fake kernel panic: %s\n", msg);
@@ -670,6 +701,16 @@ bool machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 		barrier();
 		m.status = mce_rdmsrl(mca_msr_reg(i, MCA_STATUS));
 
+		/*
+		 * Update storm tracking here, before checking for the
+		 * MCI_STATUS_VAL bit. Valid corrected errors count
+		 * towards declaring, or maintaining, storm status. No
+		 * error in a bank counts towards avoiding, or ending,
+		 * storm status.
+		 */
+		if (!mca_cfg.cmci_disabled)
+			mce_track_storm(&m);
+
 		/* If this entry is not valid, ignore it */
 		if (!(m.status & MCI_STATUS_VAL))
 			continue;
@@ -1601,13 +1642,6 @@ static unsigned long check_interval = INITIAL_CHECK_INTERVAL;
 static DEFINE_PER_CPU(unsigned long, mce_next_interval); /* in jiffies */
 static DEFINE_PER_CPU(struct timer_list, mce_timer);
 
-static unsigned long mce_adjust_timer_default(unsigned long interval)
-{
-	return interval;
-}
-
-static unsigned long (*mce_adjust_timer)(unsigned long interval) = mce_adjust_timer_default;
-
 static void __start_timer(struct timer_list *t, unsigned long interval)
 {
 	unsigned long when = jiffies + interval;
@@ -1637,15 +1671,9 @@ static void mce_timer_fn(struct timer_list *t)
 
 	iv = __this_cpu_read(mce_next_interval);
 
-	if (mce_available(this_cpu_ptr(&cpu_info))) {
+	if (mce_available(this_cpu_ptr(&cpu_info)))
 		mc_poll_banks();
 
-		if (mce_intel_cmci_poll()) {
-			iv = mce_adjust_timer(iv);
-			goto done;
-		}
-	}
-
 	/*
 	 * Alert userspace if needed. If we logged an MCE, reduce the polling
 	 * interval, otherwise increase the polling interval.
@@ -1655,23 +1683,29 @@ static void mce_timer_fn(struct timer_list *t)
 	else
 		iv = min(iv * 2, round_jiffies_relative(check_interval * HZ));
 
-done:
-	__this_cpu_write(mce_next_interval, iv);
-	__start_timer(t, iv);
+	if (mce_get_storm_mode()) {
+		__start_timer(t, HZ);
+	} else {
+		__this_cpu_write(mce_next_interval, iv);
+		__start_timer(t, iv);
+	}
 }
 
 /*
- * Ensure that the timer is firing in @interval from now.
+ * When a storm starts on any bank on this CPU, switch to polling
+ * once per second. When the storm ends, revert to the default
+ * polling interval.
  */
-void mce_timer_kick(unsigned long interval)
+void mce_timer_kick(bool storm)
 {
 	struct timer_list *t = this_cpu_ptr(&mce_timer);
-	unsigned long iv = __this_cpu_read(mce_next_interval);
 
-	__start_timer(t, interval);
+	mce_set_storm_mode(storm);
 
-	if (interval < iv)
-		__this_cpu_write(mce_next_interval, interval);
+	if (storm)
+		__start_timer(t, HZ);
+	else
+		__this_cpu_write(mce_next_interval, check_interval * HZ);
 }
 
 /* Must not be called in IRQ context where del_timer_sync() can deadlock */
@@ -1995,7 +2029,6 @@ static void mce_zhaoxin_feature_init(struct cpuinfo_x86 *c)
 
 	intel_init_cmci();
 	intel_init_lmce();
-	mce_adjust_timer = cmci_intel_adjust_timer;
 }
 
 static void mce_zhaoxin_feature_clear(struct cpuinfo_x86 *c)
@@ -2008,7 +2041,6 @@ static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c)
 	switch (c->x86_vendor) {
 	case X86_VENDOR_INTEL:
 		mce_intel_feature_init(c);
-		mce_adjust_timer = cmci_intel_adjust_timer;
 		break;
 
 	case X86_VENDOR_AMD: {
@@ -2568,9 +2600,6 @@ static int mce_device_create(unsigned int cpu)
 	int err;
 	int i, j;
 
-	if (!mce_available(&boot_cpu_data))
-		return -EIO;
-
 	dev = per_cpu(mce_device, cpu);
 	if (dev)
 		return 0;
@@ -2665,8 +2694,6 @@ static void mce_reenable_cpu(void)
 
 static int mce_cpu_dead(unsigned int cpu)
 {
-	mce_intel_hcpu_update(cpu);
-
 	/* intentionally ignoring frozen here */
 	if (!cpuhp_tasks_frozen)
 		cmci_rediscover();
diff --git a/arch/x86/kernel/cpu/mce/inject.c b/arch/x86/kernel/cpu/mce/inject.c
index 4d8d4bcf915d..72f0695c3dc1 100644
--- a/arch/x86/kernel/cpu/mce/inject.c
+++ b/arch/x86/kernel/cpu/mce/inject.c
@@ -746,6 +746,7 @@ static void check_hw_inj_possible(void)
 
 		wrmsrl_safe(mca_msr_reg(bank, MCA_STATUS), status);
 		rdmsrl_safe(mca_msr_reg(bank, MCA_STATUS), &status);
+		wrmsrl_safe(mca_msr_reg(bank, MCA_STATUS), 0);
 
 		if (!status) {
 			hw_injection_possible = false;
diff --git a/arch/x86/kernel/cpu/mce/intel.c b/arch/x86/kernel/cpu/mce/intel.c
index 52bce533ddcc..399b62e223d2 100644
--- a/arch/x86/kernel/cpu/mce/intel.c
+++ b/arch/x86/kernel/cpu/mce/intel.c
@@ -42,15 +42,6 @@
 static DEFINE_PER_CPU(mce_banks_t, mce_banks_owned);
 
 /*
- * CMCI storm detection backoff counter
- *
- * During storm, we reset this counter to INITIAL_CHECK_INTERVAL in case we've
- * encountered an error. If not, we decrement it by one. We signal the end of
- * the CMCI storm when it reaches 0.
- */
-static DEFINE_PER_CPU(int, cmci_backoff_cnt);
-
-/*
  * cmci_discover_lock protects against parallel discovery attempts
  * which could race against each other.
  */
@@ -63,22 +54,26 @@ static DEFINE_RAW_SPINLOCK(cmci_discover_lock);
  */
 static DEFINE_SPINLOCK(cmci_poll_lock);
 
+/* Linux non-storm CMCI threshold (may be overridden by BIOS) */
 #define CMCI_THRESHOLD		1
-#define CMCI_POLL_INTERVAL	(30 * HZ)
-#define CMCI_STORM_INTERVAL	(HZ)
-#define CMCI_STORM_THRESHOLD	15
 
-static DEFINE_PER_CPU(unsigned long, cmci_time_stamp);
-static DEFINE_PER_CPU(unsigned int, cmci_storm_cnt);
-static DEFINE_PER_CPU(unsigned int, cmci_storm_state);
-
-enum {
-	CMCI_STORM_NONE,
-	CMCI_STORM_ACTIVE,
-	CMCI_STORM_SUBSIDED,
-};
+/*
+ * MCi_CTL2 threshold for each bank when there is no storm.
+ * Default value for each bank may have been set by BIOS.
+ */
+static u16 cmci_threshold[MAX_NR_BANKS];
 
-static atomic_t cmci_storm_on_cpus;
+/*
+ * High threshold to limit CMCI rate during storms. Max supported is
+ * 0x7FFF. Use this slightly smaller value so it has a distinctive
+ * signature when some asks "Why am I not seeing all corrected errors?"
+ * A high threshold is used instead of just disabling CMCI for a
+ * bank because both corrected and uncorrected errors may be logged
+ * in the same bank and signalled with CMCI. The threshold only applies
+ * to corrected errors, so keeping CMCI enabled means that uncorrected
+ * errors will still be processed in a timely fashion.
+ */
+#define CMCI_STORM_THRESHOLD	32749
 
 static int cmci_supported(int *banks)
 {
@@ -134,204 +129,166 @@ static bool lmce_supported(void)
 	return tmp & FEAT_CTL_LMCE_ENABLED;
 }
 
-bool mce_intel_cmci_poll(void)
+/*
+ * Set a new CMCI threshold value. Preserve the state of the
+ * MCI_CTL2_CMCI_EN bit in case this happens during a
+ * cmci_rediscover() operation.
+ */
+static void cmci_set_threshold(int bank, int thresh)
 {
-	if (__this_cpu_read(cmci_storm_state) == CMCI_STORM_NONE)
-		return false;
-
-	/*
-	 * Reset the counter if we've logged an error in the last poll
-	 * during the storm.
-	 */
-	if (machine_check_poll(0, this_cpu_ptr(&mce_banks_owned)))
-		this_cpu_write(cmci_backoff_cnt, INITIAL_CHECK_INTERVAL);
-	else
-		this_cpu_dec(cmci_backoff_cnt);
+	unsigned long flags;
+	u64 val;
 
-	return true;
+	raw_spin_lock_irqsave(&cmci_discover_lock, flags);
+	rdmsrl(MSR_IA32_MCx_CTL2(bank), val);
+	val &= ~MCI_CTL2_CMCI_THRESHOLD_MASK;
+	wrmsrl(MSR_IA32_MCx_CTL2(bank), val | thresh);
+	raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
 }
 
-void mce_intel_hcpu_update(unsigned long cpu)
+void mce_intel_handle_storm(int bank, bool on)
 {
-	if (per_cpu(cmci_storm_state, cpu) == CMCI_STORM_ACTIVE)
-		atomic_dec(&cmci_storm_on_cpus);
+	if (on)
+		cmci_set_threshold(bank, CMCI_STORM_THRESHOLD);
+	else
+		cmci_set_threshold(bank, cmci_threshold[bank]);
+}
 
-	per_cpu(cmci_storm_state, cpu) = CMCI_STORM_NONE;
+/*
+ * The interrupt handler. This is called on every event.
+ * Just call the poller directly to log any events.
+ * This could in theory increase the threshold under high load,
+ * but doesn't for now.
+ */
+static void intel_threshold_interrupt(void)
+{
+	machine_check_poll(MCP_TIMESTAMP, this_cpu_ptr(&mce_banks_owned));
 }
 
-static void cmci_toggle_interrupt_mode(bool on)
+/*
+ * Check all the reasons why current CPU cannot claim
+ * ownership of a bank.
+ * 1: CPU already owns this bank
+ * 2: BIOS owns this bank
+ * 3: Some other CPU owns this bank
+ */
+static bool cmci_skip_bank(int bank, u64 *val)
 {
-	unsigned long flags, *owned;
-	int bank;
-	u64 val;
+	unsigned long *owned = (void *)this_cpu_ptr(&mce_banks_owned);
 
-	raw_spin_lock_irqsave(&cmci_discover_lock, flags);
-	owned = this_cpu_ptr(mce_banks_owned);
-	for_each_set_bit(bank, owned, MAX_NR_BANKS) {
-		rdmsrl(MSR_IA32_MCx_CTL2(bank), val);
+	if (test_bit(bank, owned))
+		return true;
 
-		if (on)
-			val |= MCI_CTL2_CMCI_EN;
-		else
-			val &= ~MCI_CTL2_CMCI_EN;
+	/* Skip banks in firmware first mode */
+	if (test_bit(bank, mce_banks_ce_disabled))
+		return true;
 
-		wrmsrl(MSR_IA32_MCx_CTL2(bank), val);
-	}
-	raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
-}
+	rdmsrl(MSR_IA32_MCx_CTL2(bank), *val);
 
-unsigned long cmci_intel_adjust_timer(unsigned long interval)
-{
-	if ((this_cpu_read(cmci_backoff_cnt) > 0) &&
-	    (__this_cpu_read(cmci_storm_state) == CMCI_STORM_ACTIVE)) {
-		mce_notify_irq();
-		return CMCI_STORM_INTERVAL;
+	/* Already owned by someone else? */
+	if (*val & MCI_CTL2_CMCI_EN) {
+		clear_bit(bank, owned);
+		__clear_bit(bank, this_cpu_ptr(mce_poll_banks));
+		return true;
 	}
 
-	switch (__this_cpu_read(cmci_storm_state)) {
-	case CMCI_STORM_ACTIVE:
-
-		/*
-		 * We switch back to interrupt mode once the poll timer has
-		 * silenced itself. That means no events recorded and the timer
-		 * interval is back to our poll interval.
-		 */
-		__this_cpu_write(cmci_storm_state, CMCI_STORM_SUBSIDED);
-		if (!atomic_sub_return(1, &cmci_storm_on_cpus))
-			pr_notice("CMCI storm subsided: switching to interrupt mode\n");
+	return false;
+}
 
-		fallthrough;
+/*
+ * Decide which CMCI interrupt threshold to use:
+ * 1: If this bank is in storm mode from whichever CPU was
+ *    the previous owner, stay in storm mode.
+ * 2: If ignoring any threshold set by BIOS, set Linux default
+ * 3: Try to honor BIOS threshold (unless buggy BIOS set it at zero).
+ */
+static u64 cmci_pick_threshold(u64 val, int *bios_zero_thresh)
+{
+	if ((val & MCI_CTL2_CMCI_THRESHOLD_MASK) == CMCI_STORM_THRESHOLD)
+		return val;
 
-	case CMCI_STORM_SUBSIDED:
+	if (!mca_cfg.bios_cmci_threshold) {
+		val &= ~MCI_CTL2_CMCI_THRESHOLD_MASK;
+		val |= CMCI_THRESHOLD;
+	} else if (!(val & MCI_CTL2_CMCI_THRESHOLD_MASK)) {
 		/*
-		 * We wait for all CPUs to go back to SUBSIDED state. When that
-		 * happens we switch back to interrupt mode.
+		 * If bios_cmci_threshold boot option was specified
+		 * but the threshold is zero, we'll try to initialize
+		 * it to 1.
 		 */
-		if (!atomic_read(&cmci_storm_on_cpus)) {
-			__this_cpu_write(cmci_storm_state, CMCI_STORM_NONE);
-			cmci_toggle_interrupt_mode(true);
-			cmci_recheck();
-		}
-		return CMCI_POLL_INTERVAL;
-	default:
-
-		/* We have shiny weather. Let the poll do whatever it thinks. */
-		return interval;
+		*bios_zero_thresh = 1;
+		val |= CMCI_THRESHOLD;
 	}
+
+	return val;
 }
 
-static bool cmci_storm_detect(void)
+/*
+ * Try to claim ownership of a bank.
+ */
+static void cmci_claim_bank(int bank, u64 val, int bios_zero_thresh, int *bios_wrong_thresh)
 {
-	unsigned int cnt = __this_cpu_read(cmci_storm_cnt);
-	unsigned long ts = __this_cpu_read(cmci_time_stamp);
-	unsigned long now = jiffies;
-	int r;
+	struct mca_storm_desc *storm = this_cpu_ptr(&storm_desc);
 
-	if (__this_cpu_read(cmci_storm_state) != CMCI_STORM_NONE)
-		return true;
+	val |= MCI_CTL2_CMCI_EN;
+	wrmsrl(MSR_IA32_MCx_CTL2(bank), val);
+	rdmsrl(MSR_IA32_MCx_CTL2(bank), val);
 
-	if (time_before_eq(now, ts + CMCI_STORM_INTERVAL)) {
-		cnt++;
-	} else {
-		cnt = 1;
-		__this_cpu_write(cmci_time_stamp, now);
+	/* If the enable bit did not stick, this bank should be polled. */
+	if (!(val & MCI_CTL2_CMCI_EN)) {
+		WARN_ON(!test_bit(bank, this_cpu_ptr(mce_poll_banks)));
+		storm->banks[bank].poll_only = true;
+		return;
 	}
-	__this_cpu_write(cmci_storm_cnt, cnt);
 
-	if (cnt <= CMCI_STORM_THRESHOLD)
-		return false;
-
-	cmci_toggle_interrupt_mode(false);
-	__this_cpu_write(cmci_storm_state, CMCI_STORM_ACTIVE);
-	r = atomic_add_return(1, &cmci_storm_on_cpus);
-	mce_timer_kick(CMCI_STORM_INTERVAL);
-	this_cpu_write(cmci_backoff_cnt, INITIAL_CHECK_INTERVAL);
+	/* This CPU successfully set the enable bit. */
+	set_bit(bank, (void *)this_cpu_ptr(&mce_banks_owned));
 
-	if (r == 1)
-		pr_notice("CMCI storm detected: switching to poll mode\n");
-	return true;
-}
+	if ((val & MCI_CTL2_CMCI_THRESHOLD_MASK) == CMCI_STORM_THRESHOLD) {
+		pr_notice("CPU%d BANK%d CMCI inherited storm\n", smp_processor_id(), bank);
+		mce_inherit_storm(bank);
+		cmci_storm_begin(bank);
+	} else {
+		__clear_bit(bank, this_cpu_ptr(mce_poll_banks));
+	}
 
-/*
- * The interrupt handler. This is called on every event.
- * Just call the poller directly to log any events.
- * This could in theory increase the threshold under high load,
- * but doesn't for now.
- */
-static void intel_threshold_interrupt(void)
-{
-	if (cmci_storm_detect())
-		return;
+	/*
+	 * We are able to set thresholds for some banks that
+	 * had a threshold of 0. This means the BIOS has not
+	 * set the thresholds properly or does not work with
+	 * this boot option. Note down now and report later.
+	 */
+	if (mca_cfg.bios_cmci_threshold && bios_zero_thresh &&
+	    (val & MCI_CTL2_CMCI_THRESHOLD_MASK))
+		*bios_wrong_thresh = 1;
 
-	machine_check_poll(MCP_TIMESTAMP, this_cpu_ptr(&mce_banks_owned));
+	/* Save default threshold for each bank */
+	if (cmci_threshold[bank] == 0)
+		cmci_threshold[bank] = val & MCI_CTL2_CMCI_THRESHOLD_MASK;
 }
 
 /*
  * Enable CMCI (Corrected Machine Check Interrupt) for available MCE banks
  * on this CPU. Use the algorithm recommended in the SDM to discover shared
- * banks.
+ * banks. Called during initial bootstrap, and also for hotplug CPU operations
+ * to rediscover/reassign machine check banks.
  */
 static void cmci_discover(int banks)
 {
-	unsigned long *owned = (void *)this_cpu_ptr(&mce_banks_owned);
+	int bios_wrong_thresh = 0;
 	unsigned long flags;
 	int i;
-	int bios_wrong_thresh = 0;
 
 	raw_spin_lock_irqsave(&cmci_discover_lock, flags);
 	for (i = 0; i < banks; i++) {
 		u64 val;
 		int bios_zero_thresh = 0;
 
-		if (test_bit(i, owned))
+		if (cmci_skip_bank(i, &val))
 			continue;
 
-		/* Skip banks in firmware first mode */
-		if (test_bit(i, mce_banks_ce_disabled))
-			continue;
-
-		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
-
-		/* Already owned by someone else? */
-		if (val & MCI_CTL2_CMCI_EN) {
-			clear_bit(i, owned);
-			__clear_bit(i, this_cpu_ptr(mce_poll_banks));
-			continue;
-		}
-
-		if (!mca_cfg.bios_cmci_threshold) {
-			val &= ~MCI_CTL2_CMCI_THRESHOLD_MASK;
-			val |= CMCI_THRESHOLD;
-		} else if (!(val & MCI_CTL2_CMCI_THRESHOLD_MASK)) {
-			/*
-			 * If bios_cmci_threshold boot option was specified
-			 * but the threshold is zero, we'll try to initialize
-			 * it to 1.
-			 */
-			bios_zero_thresh = 1;
-			val |= CMCI_THRESHOLD;
-		}
-
-		val |= MCI_CTL2_CMCI_EN;
-		wrmsrl(MSR_IA32_MCx_CTL2(i), val);
-		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
-
-		/* Did the enable bit stick? -- the bank supports CMCI */
-		if (val & MCI_CTL2_CMCI_EN) {
-			set_bit(i, owned);
-			__clear_bit(i, this_cpu_ptr(mce_poll_banks));
-			/*
-			 * We are able to set thresholds for some banks that
-			 * had a threshold of 0. This means the BIOS has not
-			 * set the thresholds properly or does not work with
-			 * this boot option. Note down now and report later.
-			 */
-			if (mca_cfg.bios_cmci_threshold && bios_zero_thresh &&
-					(val & MCI_CTL2_CMCI_THRESHOLD_MASK))
-				bios_wrong_thresh = 1;
-		} else {
-			WARN_ON(!test_bit(i, this_cpu_ptr(mce_poll_banks)));
-		}
+		val = cmci_pick_threshold(val, &bios_zero_thresh);
+		cmci_claim_bank(i, val, bios_zero_thresh, &bios_wrong_thresh);
 	}
 	raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
 	if (mca_cfg.bios_cmci_threshold && bios_wrong_thresh) {
@@ -370,6 +327,9 @@ static void __cmci_disable_bank(int bank)
 	val &= ~MCI_CTL2_CMCI_EN;
 	wrmsrl(MSR_IA32_MCx_CTL2(bank), val);
 	__clear_bit(bank, this_cpu_ptr(mce_banks_owned));
+
+	if ((val & MCI_CTL2_CMCI_THRESHOLD_MASK) == CMCI_STORM_THRESHOLD)
+		cmci_storm_end(bank);
 }
 
 /*
diff --git a/arch/x86/kernel/cpu/mce/internal.h b/arch/x86/kernel/cpu/mce/internal.h
index e13a26c9c0ac..01f8f03969e6 100644
--- a/arch/x86/kernel/cpu/mce/internal.h
+++ b/arch/x86/kernel/cpu/mce/internal.h
@@ -41,9 +41,7 @@ struct dentry *mce_get_debugfs_dir(void);
 extern mce_banks_t mce_banks_ce_disabled;
 
 #ifdef CONFIG_X86_MCE_INTEL
-unsigned long cmci_intel_adjust_timer(unsigned long interval);
-bool mce_intel_cmci_poll(void);
-void mce_intel_hcpu_update(unsigned long cpu);
+void mce_intel_handle_storm(int bank, bool on);
 void cmci_disable_bank(int bank);
 void intel_init_cmci(void);
 void intel_init_lmce(void);
@@ -51,9 +49,7 @@ void intel_clear_lmce(void);
 bool intel_filter_mce(struct mce *m);
 bool intel_mce_usable_address(struct mce *m);
 #else
-# define cmci_intel_adjust_timer mce_adjust_timer_default
-static inline bool mce_intel_cmci_poll(void) { return false; }
-static inline void mce_intel_hcpu_update(unsigned long cpu) { }
+static inline void mce_intel_handle_storm(int bank, bool on) { }
 static inline void cmci_disable_bank(int bank) { }
 static inline void intel_init_cmci(void) { }
 static inline void intel_init_lmce(void) { }
@@ -62,7 +58,63 @@ static inline bool intel_filter_mce(struct mce *m) { return false; }
 static inline bool intel_mce_usable_address(struct mce *m) { return false; }
 #endif
 
-void mce_timer_kick(unsigned long interval);
+void mce_timer_kick(bool storm);
+
+#ifdef CONFIG_X86_MCE_THRESHOLD
+void cmci_storm_begin(unsigned int bank);
+void cmci_storm_end(unsigned int bank);
+void mce_track_storm(struct mce *mce);
+void mce_inherit_storm(unsigned int bank);
+bool mce_get_storm_mode(void);
+void mce_set_storm_mode(bool storm);
+#else
+static inline void cmci_storm_begin(unsigned int bank) {}
+static inline void cmci_storm_end(unsigned int bank) {}
+static inline void mce_track_storm(struct mce *mce) {}
+static inline void mce_inherit_storm(unsigned int bank) {}
+static inline bool mce_get_storm_mode(void) { return false; }
+static inline void mce_set_storm_mode(bool storm) {}
+#endif
+
+/*
+ * history:		Bitmask tracking errors occurrence. Each set bit
+ *			represents an error seen.
+ *
+ * timestamp:		Last time (in jiffies) that the bank was polled.
+ * in_storm_mode:	Is this bank in storm mode?
+ * poll_only:		Bank does not support CMCI, skip storm tracking.
+ */
+struct storm_bank {
+	u64 history;
+	u64 timestamp;
+	bool in_storm_mode;
+	bool poll_only;
+};
+
+#define NUM_HISTORY_BITS (sizeof(u64) * BITS_PER_BYTE)
+
+/* How many errors within the history buffer mark the start of a storm. */
+#define STORM_BEGIN_THRESHOLD	5
+
+/*
+ * How many polls of machine check bank without an error before declaring
+ * the storm is over. Since it is tracked by the bitmasks in the history
+ * field of struct storm_bank the mask is 30 bits [0 ... 29].
+ */
+#define STORM_END_POLL_THRESHOLD	29
+
+/*
+ * banks:		per-cpu, per-bank details
+ * stormy_bank_count:	count of MC banks in storm state
+ * poll_mode:		CPU is in poll mode
+ */
+struct mca_storm_desc {
+	struct storm_bank	banks[MAX_NR_BANKS];
+	u8			stormy_bank_count;
+	bool			poll_mode;
+};
+
+DECLARE_PER_CPU(struct mca_storm_desc, storm_desc);
 
 #ifdef CONFIG_ACPI_APEI
 int apei_write_mce(struct mce *m);
diff --git a/arch/x86/kernel/cpu/mce/threshold.c b/arch/x86/kernel/cpu/mce/threshold.c
index ef4e7bb5fd88..89e31e1e5c9c 100644
--- a/arch/x86/kernel/cpu/mce/threshold.c
+++ b/arch/x86/kernel/cpu/mce/threshold.c
@@ -29,3 +29,118 @@ DEFINE_IDTENTRY_SYSVEC(sysvec_threshold)
 	trace_threshold_apic_exit(THRESHOLD_APIC_VECTOR);
 	apic_eoi();
 }
+
+DEFINE_PER_CPU(struct mca_storm_desc, storm_desc);
+
+void mce_inherit_storm(unsigned int bank)
+{
+	struct mca_storm_desc *storm = this_cpu_ptr(&storm_desc);
+
+	/*
+	 * Previous CPU owning this bank had put it into storm mode,
+	 * but the precise history of that storm is unknown. Assume
+	 * the worst (all recent polls of the bank found a valid error
+	 * logged). This will avoid the new owner prematurely declaring
+	 * the storm has ended.
+	 */
+	storm->banks[bank].history = ~0ull;
+	storm->banks[bank].timestamp = jiffies;
+}
+
+bool mce_get_storm_mode(void)
+{
+	return __this_cpu_read(storm_desc.poll_mode);
+}
+
+void mce_set_storm_mode(bool storm)
+{
+	__this_cpu_write(storm_desc.poll_mode, storm);
+}
+
+static void mce_handle_storm(unsigned int bank, bool on)
+{
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_INTEL:
+		mce_intel_handle_storm(bank, on);
+		break;
+	}
+}
+
+void cmci_storm_begin(unsigned int bank)
+{
+	struct mca_storm_desc *storm = this_cpu_ptr(&storm_desc);
+
+	__set_bit(bank, this_cpu_ptr(mce_poll_banks));
+	storm->banks[bank].in_storm_mode = true;
+
+	/*
+	 * If this is the first bank on this CPU to enter storm mode
+	 * start polling.
+	 */
+	if (++storm->stormy_bank_count == 1)
+		mce_timer_kick(true);
+}
+
+void cmci_storm_end(unsigned int bank)
+{
+	struct mca_storm_desc *storm = this_cpu_ptr(&storm_desc);
+
+	__clear_bit(bank, this_cpu_ptr(mce_poll_banks));
+	storm->banks[bank].history = 0;
+	storm->banks[bank].in_storm_mode = false;
+
+	/* If no banks left in storm mode, stop polling. */
+	if (!this_cpu_dec_return(storm_desc.stormy_bank_count))
+		mce_timer_kick(false);
+}
+
+void mce_track_storm(struct mce *mce)
+{
+	struct mca_storm_desc *storm = this_cpu_ptr(&storm_desc);
+	unsigned long now = jiffies, delta;
+	unsigned int shift = 1;
+	u64 history = 0;
+
+	/* No tracking needed for banks that do not support CMCI */
+	if (storm->banks[mce->bank].poll_only)
+		return;
+
+	/*
+	 * When a bank is in storm mode it is polled once per second and
+	 * the history mask will record about the last minute of poll results.
+	 * If it is not in storm mode, then the bank is only checked when
+	 * there is a CMCI interrupt. Check how long it has been since
+	 * this bank was last checked, and adjust the amount of "shift"
+	 * to apply to history.
+	 */
+	if (!storm->banks[mce->bank].in_storm_mode) {
+		delta = now - storm->banks[mce->bank].timestamp;
+		shift = (delta + HZ) / HZ;
+	}
+
+	/* If it has been a long time since the last poll, clear history. */
+	if (shift < NUM_HISTORY_BITS)
+		history = storm->banks[mce->bank].history << shift;
+
+	storm->banks[mce->bank].timestamp = now;
+
+	/* History keeps track of corrected errors. VAL=1 && UC=0 */
+	if ((mce->status & MCI_STATUS_VAL) && mce_is_correctable(mce))
+		history |= 1;
+
+	storm->banks[mce->bank].history = history;
+
+	if (storm->banks[mce->bank].in_storm_mode) {
+		if (history & GENMASK_ULL(STORM_END_POLL_THRESHOLD, 0))
+			return;
+		printk_deferred(KERN_NOTICE "CPU%d BANK%d CMCI storm subsided\n", smp_processor_id(), mce->bank);
+		mce_handle_storm(mce->bank, false);
+		cmci_storm_end(mce->bank);
+	} else {
+		if (hweight64(history) < STORM_BEGIN_THRESHOLD)
+			return;
+		printk_deferred(KERN_NOTICE "CPU%d BANK%d CMCI storm detected\n", smp_processor_id(), mce->bank);
+		mce_handle_storm(mce->bank, true);
+		cmci_storm_begin(mce->bank);
+	}
+}
diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c
index 070426b9895f..857e608af641 100644
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -370,14 +370,14 @@ static __init struct microcode_intel *get_microcode_blob(struct ucode_cpu_info *
 {
 	struct cpio_data cp;
 
+	intel_collect_cpu_info(&uci->cpu_sig);
+
 	if (!load_builtin_intel_microcode(&cp))
 		cp = find_microcode_in_initrd(ucode_path);
 
 	if (!(cp.data && cp.size))
 		return NULL;
 
-	intel_collect_cpu_info(&uci->cpu_sig);
-
 	return scan_microcode(cp.data, cp.size, uci, save);
 }
 
@@ -410,13 +410,13 @@ void __init load_ucode_intel_bsp(struct early_load_data *ed)
 {
 	struct ucode_cpu_info uci;
 
-	ed->old_rev = intel_get_microcode_revision();
-
 	uci.mc = get_microcode_blob(&uci, false);
-	if (uci.mc && apply_microcode_early(&uci) == UCODE_UPDATED)
-		ucode_patch_va = UCODE_BSP_LOADED;
+	ed->old_rev = uci.cpu_sig.rev;
 
-	ed->new_rev = uci.cpu_sig.rev;
+	if (uci.mc && apply_microcode_early(&uci) == UCODE_UPDATED) {
+		ucode_patch_va = UCODE_BSP_LOADED;
+		ed->new_rev = uci.cpu_sig.rev;
+	}
 }
 
 void load_ucode_intel_ap(void)
@@ -457,12 +457,6 @@ static enum ucode_state apply_microcode_late(int cpu)
 	if (ret != UCODE_UPDATED && ret != UCODE_OK)
 		return ret;
 
-	if (!cpu && uci->cpu_sig.rev != cur_rev) {
-		pr_info("Updated to revision 0x%x, date = %04x-%02x-%02x\n",
-			uci->cpu_sig.rev, mc->hdr.date & 0xffff, mc->hdr.date >> 24,
-			(mc->hdr.date >> 16) & 0xff);
-	}
-
 	cpu_data(cpu).microcode	 = uci->cpu_sig.rev;
 	if (!cpu)
 		boot_cpu_data.microcode = uci->cpu_sig.rev;
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 2d6aa5d2e3d7..d3524778a545 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -428,6 +428,10 @@ void __init mtrr_copy_map(void)
  * from the x86_init.hyper.init_platform() hook.  It can be called only once.
  * The MTRR state can't be changed afterwards.  To ensure that, X86_FEATURE_MTRR
  * is cleared.
+ *
+ * @var: MTRR variable range array to use
+ * @num_var: length of the @var array
+ * @def_type: default caching type
  */
 void mtrr_overwrite_state(struct mtrr_var_range *var, unsigned int num_var,
 			  mtrr_type def_type)
@@ -492,13 +496,15 @@ static u8 type_merge(u8 type, u8 new_type, u8 *uniform)
 /**
  * mtrr_type_lookup - look up memory type in MTRR
  *
+ * @start: Begin of the physical address range
+ * @end: End of the physical address range
+ * @uniform: output argument:
+ *  - 1: the returned MTRR type is valid for the whole region
+ *  - 0: otherwise
+ *
  * Return Values:
  * MTRR_TYPE_(type)  - The effective MTRR type for the region
  * MTRR_TYPE_INVALID - MTRR is disabled
- *
- * Output Argument:
- * uniform - Set to 1 when the returned MTRR type is valid for the whole
- *	     region, set to 0 else.
  */
 u8 mtrr_type_lookup(u64 start, u64 end, u8 *uniform)
 {
diff --git a/arch/x86/kernel/cpu/sgx/ioctl.c b/arch/x86/kernel/cpu/sgx/ioctl.c
index 5d390df21440..b65ab214bdf5 100644
--- a/arch/x86/kernel/cpu/sgx/ioctl.c
+++ b/arch/x86/kernel/cpu/sgx/ioctl.c
@@ -581,7 +581,7 @@ err_out:
  *
  * Flush any outstanding enqueued EADD operations and perform EINIT.  The
  * Launch Enclave Public Key Hash MSRs are rewritten as necessary to match
- * the enclave's MRSIGNER, which is caculated from the provided sigstruct.
+ * the enclave's MRSIGNER, which is calculated from the provided sigstruct.
  *
  * Return:
  * - 0:		Success.
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index c92d88680dbf..b6b044356f1b 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -170,7 +170,7 @@ static int elf_header_exclude_ranges(struct crash_mem *cmem)
 	int ret = 0;
 
 	/* Exclude the low 1M because it is always reserved */
-	ret = crash_exclude_mem_range(cmem, 0, (1<<20)-1);
+	ret = crash_exclude_mem_range(cmem, 0, SZ_1M - 1);
 	if (ret)
 		return ret;
 
@@ -198,8 +198,8 @@ static int prepare_elf64_ram_headers_callback(struct resource *res, void *arg)
 }
 
 /* Prepare elf headers. Return addr and size */
-static int prepare_elf_headers(struct kimage *image, void **addr,
-					unsigned long *sz, unsigned long *nr_mem_ranges)
+static int prepare_elf_headers(void **addr, unsigned long *sz,
+			       unsigned long *nr_mem_ranges)
 {
 	struct crash_mem *cmem;
 	int ret;
@@ -221,7 +221,7 @@ static int prepare_elf_headers(struct kimage *image, void **addr,
 	*nr_mem_ranges = cmem->nr_ranges;
 
 	/* By default prepare 64bit headers */
-	ret =  crash_prepare_elf64_headers(cmem, IS_ENABLED(CONFIG_X86_64), addr, sz);
+	ret = crash_prepare_elf64_headers(cmem, IS_ENABLED(CONFIG_X86_64), addr, sz);
 
 out:
 	vfree(cmem);
@@ -349,7 +349,7 @@ int crash_load_segments(struct kimage *image)
 				  .buf_max = ULONG_MAX, .top_down = false };
 
 	/* Prepare elf headers and add a segment */
-	ret = prepare_elf_headers(image, &kbuf.buffer, &kbuf.bufsz, &pnum);
+	ret = prepare_elf_headers(&kbuf.buffer, &kbuf.bufsz, &pnum);
 	if (ret)
 		return ret;
 
@@ -386,8 +386,8 @@ int crash_load_segments(struct kimage *image)
 	if (ret)
 		return ret;
 	image->elf_load_addr = kbuf.mem;
-	pr_debug("Loaded ELF headers at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-		 image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
+	kexec_dprintk("Loaded ELF headers at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		      image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
 
 	return ret;
 }
@@ -452,7 +452,7 @@ void arch_crash_handle_hotplug_event(struct kimage *image)
 	 * Create the new elfcorehdr reflecting the changes to CPU and/or
 	 * memory resources.
 	 */
-	if (prepare_elf_headers(image, &elfbuf, &elfsz, &nr_mem_ranges)) {
+	if (prepare_elf_headers(&elfbuf, &elfsz, &nr_mem_ranges)) {
 		pr_err("unable to create new elfcorehdr");
 		goto out;
 	}
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index fb8cf953380d..b66f540de054 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1017,10 +1017,12 @@ void __init e820__reserve_setup_data(void)
 		e820__range_update(pa_data, sizeof(*data)+data->len, E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
 
 		/*
-		 * SETUP_EFI and SETUP_IMA are supplied by kexec and do not need
-		 * to be reserved.
+		 * SETUP_EFI, SETUP_IMA and SETUP_RNG_SEED are supplied by
+		 * kexec and do not need to be reserved.
 		 */
-		if (data->type != SETUP_EFI && data->type != SETUP_IMA)
+		if (data->type != SETUP_EFI &&
+		    data->type != SETUP_IMA &&
+		    data->type != SETUP_RNG_SEED)
 			e820__range_update_kexec(pa_data,
 						 sizeof(*data) + data->len,
 						 E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index a6c1867fc7aa..59f4aefc6bc1 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -779,13 +779,13 @@ static int __init check_dev_quirk(int num, int slot, int func)
 	type = read_pci_config_byte(num, slot, func,
 				    PCI_HEADER_TYPE);
 
-	if ((type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) {
+	if ((type & PCI_HEADER_TYPE_MASK) == PCI_HEADER_TYPE_BRIDGE) {
 		sec = read_pci_config_byte(num, slot, func, PCI_SECONDARY_BUS);
 		if (sec > num)
 			early_pci_scan_bus(sec);
 	}
 
-	if (!(type & 0x80))
+	if (!(type & PCI_HEADER_TYPE_MFD))
 		return -1;
 
 	return 0;
diff --git a/arch/x86/kernel/fpu/bugs.c b/arch/x86/kernel/fpu/bugs.c
index 794e70151203..a06b876bbf2d 100644
--- a/arch/x86/kernel/fpu/bugs.c
+++ b/arch/x86/kernel/fpu/bugs.c
@@ -2,6 +2,7 @@
 /*
  * x86 FPU bug checks:
  */
+#include <asm/cpufeature.h>
 #include <asm/fpu/api.h>
 
 /*
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index a21a4d0ecc34..520deb411a70 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -308,7 +308,7 @@ EXPORT_SYMBOL_GPL(fpu_update_guest_xfd);
  * Must be invoked from KVM after a VMEXIT before enabling interrupts when
  * XFD write emulation is disabled. This is required because the guest can
  * freely modify XFD and the state at VMEXIT is not guaranteed to be the
- * same as the state on VMENTER. So software state has to be udpated before
+ * same as the state on VMENTER. So software state has to be updated before
  * any operation which depends on it can take place.
  *
  * Note: It can be invoked unconditionally even when write emulation is
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index 558076dbde5b..247f2225aa9f 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -274,12 +274,13 @@ static int __restore_fpregs_from_user(void __user *buf, u64 ufeatures,
  * Attempt to restore the FPU registers directly from user memory.
  * Pagefaults are handled and any errors returned are fatal.
  */
-static bool restore_fpregs_from_user(void __user *buf, u64 xrestore,
-				     bool fx_only, unsigned int size)
+static bool restore_fpregs_from_user(void __user *buf, u64 xrestore, bool fx_only)
 {
 	struct fpu *fpu = &current->thread.fpu;
 	int ret;
 
+	/* Restore enabled features only. */
+	xrestore &= fpu->fpstate->user_xfeatures;
 retry:
 	fpregs_lock();
 	/* Ensure that XFD is up to date */
@@ -309,7 +310,7 @@ retry:
 		if (ret != X86_TRAP_PF)
 			return false;
 
-		if (!fault_in_readable(buf, size))
+		if (!fault_in_readable(buf, fpu->fpstate->user_size))
 			goto retry;
 		return false;
 	}
@@ -339,7 +340,6 @@ static bool __fpu_restore_sig(void __user *buf, void __user *buf_fx,
 	struct user_i387_ia32_struct env;
 	bool success, fx_only = false;
 	union fpregs_state *fpregs;
-	unsigned int state_size;
 	u64 user_xfeatures = 0;
 
 	if (use_xsave()) {
@@ -349,17 +349,14 @@ static bool __fpu_restore_sig(void __user *buf, void __user *buf_fx,
 			return false;
 
 		fx_only = !fx_sw_user.magic1;
-		state_size = fx_sw_user.xstate_size;
 		user_xfeatures = fx_sw_user.xfeatures;
 	} else {
 		user_xfeatures = XFEATURE_MASK_FPSSE;
-		state_size = fpu->fpstate->user_size;
 	}
 
 	if (likely(!ia32_fxstate)) {
 		/* Restore the FPU registers directly from user memory. */
-		return restore_fpregs_from_user(buf_fx, user_xfeatures, fx_only,
-						state_size);
+		return restore_fpregs_from_user(buf_fx, user_xfeatures, fx_only);
 	}
 
 	/*
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 05a110c97111..dc0956067944 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -71,9 +71,9 @@ EXPORT_SYMBOL(vmemmap_base);
  * GDT used on the boot CPU before switching to virtual addresses.
  */
 static struct desc_struct startup_gdt[GDT_ENTRIES] __initdata = {
-	[GDT_ENTRY_KERNEL32_CS]         = GDT_ENTRY_INIT(0xc09b, 0, 0xfffff),
-	[GDT_ENTRY_KERNEL_CS]           = GDT_ENTRY_INIT(0xa09b, 0, 0xfffff),
-	[GDT_ENTRY_KERNEL_DS]           = GDT_ENTRY_INIT(0xc093, 0, 0xfffff),
+	[GDT_ENTRY_KERNEL32_CS]         = GDT_ENTRY_INIT(DESC_CODE32, 0, 0xfffff),
+	[GDT_ENTRY_KERNEL_CS]           = GDT_ENTRY_INIT(DESC_CODE64, 0, 0xfffff),
+	[GDT_ENTRY_KERNEL_DS]           = GDT_ENTRY_INIT(DESC_DATA64, 0, 0xfffff),
 };
 
 /*
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 0f8103240fda..d4918d03efb4 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -114,6 +114,28 @@ SYM_CODE_START_NOALIGN(startup_64)
 
 	/* Form the CR3 value being sure to include the CR3 modifier */
 	addq	$(early_top_pgt - __START_KERNEL_map), %rax
+
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+	mov	%rax, %rdi
+	mov	%rax, %r14
+
+	addq	phys_base(%rip), %rdi
+
+	/*
+	 * For SEV guests: Verify that the C-bit is correct. A malicious
+	 * hypervisor could lie about the C-bit position to perform a ROP
+	 * attack on the guest by writing to the unencrypted stack and wait for
+	 * the next RET instruction.
+	 */
+	call	sev_verify_cbit
+
+	/*
+	 * Restore CR3 value without the phys_base which will be added
+	 * below, before writing %cr3.
+	 */
+	 mov	%r14, %rax
+#endif
+
 	jmp 1f
 SYM_CODE_END(startup_64)
 
@@ -182,7 +204,7 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
 	/* Enable PAE mode, PSE, PGE and LA57 */
 	orl	$(X86_CR4_PAE | X86_CR4_PSE | X86_CR4_PGE), %ecx
 #ifdef CONFIG_X86_5LEVEL
-	testl	$1, __pgtable_l5_enabled(%rip)
+	testb	$1, __pgtable_l5_enabled(%rip)
 	jz	1f
 	orl	$X86_CR4_LA57, %ecx
 1:
@@ -193,21 +215,12 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
 	addq	phys_base(%rip), %rax
 
 	/*
-	 * For SEV guests: Verify that the C-bit is correct. A malicious
-	 * hypervisor could lie about the C-bit position to perform a ROP
-	 * attack on the guest by writing to the unencrypted stack and wait for
-	 * the next RET instruction.
-	 */
-	movq	%rax, %rdi
-	call	sev_verify_cbit
-
-	/*
 	 * Switch to new page-table
 	 *
 	 * For the boot CPU this switches to early_top_pgt which still has the
-	 * indentity mappings present. The secondary CPUs will switch to the
+	 * identity mappings present. The secondary CPUs will switch to the
 	 * init_top_pgt here, away from the trampoline_pgd and unmap the
-	 * indentity mapped ranges.
+	 * identity mapped ranges.
 	 */
 	movq	%rax, %cr3
 
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 41eecf180b7f..a38d0c93a66e 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -707,7 +707,7 @@ static void __init hpet_select_clockevents(void)
 
 	hpet_base.nr_clockevents = 0;
 
-	/* No point if MSI is disabled or CPU has an Always Runing APIC Timer */
+	/* No point if MSI is disabled or CPU has an Always Running APIC Timer */
 	if (hpet_msi_disable || boot_cpu_has(X86_FEATURE_ARAT))
 		return;
 
@@ -965,7 +965,7 @@ static bool __init mwait_pc10_supported(void)
  * and per CPU timer interrupts.
  *
  * The probability that this problem is going to be solved in the
- * forseeable future is close to zero, so the kernel has to be cluttered
+ * foreseeable future is close to zero, so the kernel has to be cluttered
  * with heuristics to keep up with the ever growing amount of hardware and
  * firmware trainwrecks. Hopefully some day hardware people will understand
  * that the approach of "This can be fixed in software" is not sustainable.
@@ -1438,7 +1438,7 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
 	memset(&curr_time, 0, sizeof(struct rtc_time));
 
 	if (hpet_rtc_flags & (RTC_UIE | RTC_AIE)) {
-		if (unlikely(mc146818_get_time(&curr_time) < 0)) {
+		if (unlikely(mc146818_get_time(&curr_time, 10) < 0)) {
 			pr_err_ratelimited("unable to read current time from RTC\n");
 			return IRQ_HANDLED;
 		}
diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c
index a61c12c01270..2a422e00ed4b 100644
--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -82,7 +82,7 @@ static int setup_cmdline(struct kimage *image, struct boot_params *params,
 
 	cmdline_ptr[cmdline_len - 1] = '\0';
 
-	pr_debug("Final command line is: %s\n", cmdline_ptr);
+	kexec_dprintk("Final command line is: %s\n", cmdline_ptr);
 	cmdline_ptr_phys = bootparams_load_addr + cmdline_offset;
 	cmdline_low_32 = cmdline_ptr_phys & 0xffffffffUL;
 	cmdline_ext_32 = cmdline_ptr_phys >> 32;
@@ -272,7 +272,12 @@ setup_boot_parameters(struct kimage *image, struct boot_params *params,
 
 	nr_e820_entries = params->e820_entries;
 
+	kexec_dprintk("E820 memmap:\n");
 	for (i = 0; i < nr_e820_entries; i++) {
+		kexec_dprintk("%016llx-%016llx (%d)\n",
+			      params->e820_table[i].addr,
+			      params->e820_table[i].addr + params->e820_table[i].size - 1,
+			      params->e820_table[i].type);
 		if (params->e820_table[i].type != E820_TYPE_RAM)
 			continue;
 		start = params->e820_table[i].addr;
@@ -424,7 +429,7 @@ static void *bzImage64_load(struct kimage *image, char *kernel,
 	 * command line. Make sure it does not overflow
 	 */
 	if (cmdline_len + MAX_ELFCOREHDR_STR_LEN > header->cmdline_size) {
-		pr_debug("Appending elfcorehdr=<addr> to command line exceeds maximum allowed length\n");
+		pr_err("Appending elfcorehdr=<addr> to command line exceeds maximum allowed length\n");
 		return ERR_PTR(-EINVAL);
 	}
 
@@ -445,7 +450,7 @@ static void *bzImage64_load(struct kimage *image, char *kernel,
 		return ERR_PTR(ret);
 	}
 
-	pr_debug("Loaded purgatory at 0x%lx\n", pbuf.mem);
+	kexec_dprintk("Loaded purgatory at 0x%lx\n", pbuf.mem);
 
 
 	/*
@@ -490,8 +495,8 @@ static void *bzImage64_load(struct kimage *image, char *kernel,
 	if (ret)
 		goto out_free_params;
 	bootparam_load_addr = kbuf.mem;
-	pr_debug("Loaded boot_param, command line and misc at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-		 bootparam_load_addr, kbuf.bufsz, kbuf.bufsz);
+	kexec_dprintk("Loaded boot_param, command line and misc at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		      bootparam_load_addr, kbuf.bufsz, kbuf.memsz);
 
 	/* Load kernel */
 	kbuf.buffer = kernel + kern16_size;
@@ -505,8 +510,8 @@ static void *bzImage64_load(struct kimage *image, char *kernel,
 		goto out_free_params;
 	kernel_load_addr = kbuf.mem;
 
-	pr_debug("Loaded 64bit kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-		 kernel_load_addr, kbuf.bufsz, kbuf.memsz);
+	kexec_dprintk("Loaded 64bit kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		      kernel_load_addr, kbuf.bufsz, kbuf.memsz);
 
 	/* Load initrd high */
 	if (initrd) {
@@ -520,8 +525,8 @@ static void *bzImage64_load(struct kimage *image, char *kernel,
 			goto out_free_params;
 		initrd_load_addr = kbuf.mem;
 
-		pr_debug("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-				initrd_load_addr, initrd_len, initrd_len);
+		kexec_dprintk("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			      initrd_load_addr, initrd_len, initrd_len);
 
 		setup_initrd(params, initrd_load_addr, initrd_len);
 	}
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index 0ddb3bd0f1aa..428ee74002e1 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -434,7 +434,8 @@ static void __init sev_map_percpu_data(void)
 {
 	int cpu;
 
-	if (!cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT))
+	if (cc_vendor != CC_VENDOR_AMD ||
+	    !cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT))
 		return;
 
 	for_each_possible_cpu(cpu) {
@@ -803,8 +804,8 @@ extern bool __raw_callee_save___kvm_vcpu_is_preempted(long);
  "cmpb   $0, " __stringify(KVM_STEAL_TIME_preempted) "+steal_time(%rax)\n\t" \
  "setne  %al\n\t"
 
-DEFINE_PARAVIRT_ASM(__raw_callee_save___kvm_vcpu_is_preempted,
-		    PV_VCPU_PREEMPTED_ASM, .text);
+DEFINE_ASM_FUNC(__raw_callee_save___kvm_vcpu_is_preempted,
+		PV_VCPU_PREEMPTED_ASM, .text);
 #endif
 
 static void __init kvm_guest_init(void)
@@ -942,7 +943,7 @@ static void __init kvm_init_platform(void)
 		 * Reset the host's shared pages list related to kernel
 		 * specific page encryption status settings before we load a
 		 * new kernel by kexec. Reset the page encryption status
-		 * during early boot intead of just before kexec to avoid SMP
+		 * during early boot instead of just before kexec to avoid SMP
 		 * races during kvm_pv_guest_cpu_reboot().
 		 * NOTE: We cannot reset the complete shared pages list
 		 * here as we need to retain the UEFI/OVMF firmware
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index fb8f52149be9..5bb395551c44 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -24,8 +24,8 @@
 
 static int kvmclock __initdata = 1;
 static int kvmclock_vsyscall __initdata = 1;
-static int msr_kvm_system_time __ro_after_init = MSR_KVM_SYSTEM_TIME;
-static int msr_kvm_wall_clock __ro_after_init = MSR_KVM_WALL_CLOCK;
+static int msr_kvm_system_time __ro_after_init;
+static int msr_kvm_wall_clock __ro_after_init;
 static u64 kvm_sched_clock_offset __ro_after_init;
 
 static int __init parse_no_kvmclock(char *arg)
@@ -42,7 +42,7 @@ static int __init parse_no_kvmclock_vsyscall(char *arg)
 }
 early_param("no-kvmclock-vsyscall", parse_no_kvmclock_vsyscall);
 
-/* Aligned to page sizes to match whats mapped via vsyscalls to userspace */
+/* Aligned to page sizes to match what's mapped via vsyscalls to userspace */
 #define HVC_BOOT_ARRAY_SIZE \
 	(PAGE_SIZE / sizeof(struct pvclock_vsyscall_time_info))
 
@@ -195,7 +195,8 @@ static void kvm_setup_secondary_clock(void)
 
 void kvmclock_disable(void)
 {
-	native_write_msr(msr_kvm_system_time, 0, 0);
+	if (msr_kvm_system_time)
+		native_write_msr(msr_kvm_system_time, 0, 0);
 }
 
 static void __init kvmclock_init_mem(void)
@@ -294,7 +295,10 @@ void __init kvmclock_init(void)
 	if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE2)) {
 		msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW;
 		msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW;
-	} else if (!kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) {
+	} else if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) {
+		msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
+		msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
+	} else {
 		return;
 	}
 
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index adc67f98819a..7a814b41402d 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -7,7 +7,7 @@
  * This handles calls from both 32bit and 64bit mode.
  *
  * Lock order:
- *	contex.ldt_usr_sem
+ *	context.ldt_usr_sem
  *	  mmap_lock
  *	    context.lock
  */
@@ -49,7 +49,7 @@ void load_mm_ldt(struct mm_struct *mm)
 	/*
 	 * Any change to mm->context.ldt is followed by an IPI to all
 	 * CPUs with the mm active.  The LDT will not be freed until
-	 * after the IPI is handled by all such CPUs.  This means that,
+	 * after the IPI is handled by all such CPUs.  This means that
 	 * if the ldt_struct changes before we return, the values we see
 	 * will be safe, and the new values will be loaded before we run
 	 * any user code.
@@ -685,7 +685,7 @@ SYSCALL_DEFINE3(modify_ldt, int , func , void __user * , ptr ,
 	}
 	/*
 	 * The SYSCALL_DEFINE() macros give us an 'unsigned long'
-	 * return type, but tht ABI for sys_modify_ldt() expects
+	 * return type, but the ABI for sys_modify_ldt() expects
 	 * 'int'.  This cast gives us an int-sized value in %rax
 	 * for the return code.  The 'unsigned' is necessary so
 	 * the compiler does not try to sign-extend the negative
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 1a3e2c05a8a5..bc0a5348b4a6 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -42,12 +42,9 @@ struct init_pgtable_data {
 static int mem_region_callback(struct resource *res, void *arg)
 {
 	struct init_pgtable_data *data = arg;
-	unsigned long mstart, mend;
-
-	mstart = res->start;
-	mend = mstart + resource_size(res) - 1;
 
-	return kernel_ident_mapping_init(data->info, data->level4p, mstart, mend);
+	return kernel_ident_mapping_init(data->info, data->level4p,
+					 res->start, res->end + 1);
 }
 
 static int
diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index 5f71a0cf4399..e18914c0e38a 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -276,7 +276,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    struct module *me)
 {
 	const Elf_Shdr *s, *alt = NULL, *locks = NULL,
-		*para = NULL, *orc = NULL, *orc_ip = NULL,
+		*orc = NULL, *orc_ip = NULL,
 		*retpolines = NULL, *returns = NULL, *ibt_endbr = NULL,
 		*calls = NULL, *cfi = NULL;
 	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
@@ -286,8 +286,6 @@ int module_finalize(const Elf_Ehdr *hdr,
 			alt = s;
 		if (!strcmp(".smp_locks", secstrings + s->sh_name))
 			locks = s;
-		if (!strcmp(".parainstructions", secstrings + s->sh_name))
-			para = s;
 		if (!strcmp(".orc_unwind", secstrings + s->sh_name))
 			orc = s;
 		if (!strcmp(".orc_unwind_ip", secstrings + s->sh_name))
@@ -304,14 +302,6 @@ int module_finalize(const Elf_Ehdr *hdr,
 			ibt_endbr = s;
 	}
 
-	/*
-	 * See alternative_instructions() for the ordering rules between the
-	 * various patching types.
-	 */
-	if (para) {
-		void *pseg = (void *)para->sh_addr;
-		apply_paravirt(pseg, pseg + para->sh_size);
-	}
 	if (retpolines || cfi) {
 		void *rseg = NULL, *cseg = NULL;
 		unsigned int rsize = 0, csize = 0;
@@ -341,7 +331,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 		void *aseg = (void *)alt->sh_addr;
 		apply_alternatives(aseg, aseg + alt->sh_size);
 	}
-	if (calls || para) {
+	if (calls || alt) {
 		struct callthunk_sites cs = {};
 
 		if (calls) {
@@ -349,9 +339,9 @@ int module_finalize(const Elf_Ehdr *hdr,
 			cs.call_end = (void *)calls->sh_addr + calls->sh_size;
 		}
 
-		if (para) {
-			cs.pv_start = (void *)para->sh_addr;
-			cs.pv_end = (void *)para->sh_addr + para->sh_size;
+		if (alt) {
+			cs.alt_start = (void *)alt->sh_addr;
+			cs.alt_end = (void *)alt->sh_addr + alt->sh_size;
 		}
 
 		callthunks_patch_module_calls(&cs, me);
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 17e955ab69fe..3082cf24b69e 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -563,9 +563,6 @@ nmi_restart:
 	}
 	if (this_cpu_dec_return(nmi_state))
 		goto nmi_restart;
-
-	if (user_mode(regs))
-		mds_user_clear_cpu_buffers();
 }
 
 #if IS_ENABLED(CONFIG_KVM_INTEL)
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 97f1436c1a20..5358d43886ad 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -34,14 +34,8 @@
 #include <asm/io_bitmap.h>
 #include <asm/gsseg.h>
 
-/*
- * nop stub, which must not clobber anything *including the stack* to
- * avoid confusing the entry prologues.
- */
-DEFINE_PARAVIRT_ASM(_paravirt_nop, "", .entry.text);
-
 /* stub always returning 0. */
-DEFINE_PARAVIRT_ASM(paravirt_ret0, "xor %eax,%eax", .entry.text);
+DEFINE_ASM_FUNC(paravirt_ret0, "xor %eax,%eax", .entry.text);
 
 void __init default_banner(void)
 {
@@ -49,26 +43,12 @@ void __init default_banner(void)
 	       pv_info.name);
 }
 
-/* Undefined instruction for dealing with missing ops pointers. */
-noinstr void paravirt_BUG(void)
-{
-	BUG();
-}
-
-static unsigned paravirt_patch_call(void *insn_buff, const void *target,
-				    unsigned long addr, unsigned len)
-{
-	__text_gen_insn(insn_buff, CALL_INSN_OPCODE,
-			(void *)addr, target, CALL_INSN_SIZE);
-	return CALL_INSN_SIZE;
-}
-
 #ifdef CONFIG_PARAVIRT_XXL
-DEFINE_PARAVIRT_ASM(_paravirt_ident_64, "mov %rdi, %rax", .text);
-DEFINE_PARAVIRT_ASM(pv_native_save_fl, "pushf; pop %rax", .noinstr.text);
-DEFINE_PARAVIRT_ASM(pv_native_irq_disable, "cli", .noinstr.text);
-DEFINE_PARAVIRT_ASM(pv_native_irq_enable, "sti", .noinstr.text);
-DEFINE_PARAVIRT_ASM(pv_native_read_cr2, "mov %cr2, %rax", .noinstr.text);
+DEFINE_ASM_FUNC(_paravirt_ident_64, "mov %rdi, %rax", .text);
+DEFINE_ASM_FUNC(pv_native_save_fl, "pushf; pop %rax", .noinstr.text);
+DEFINE_ASM_FUNC(pv_native_irq_disable, "cli", .noinstr.text);
+DEFINE_ASM_FUNC(pv_native_irq_enable, "sti", .noinstr.text);
+DEFINE_ASM_FUNC(pv_native_read_cr2, "mov %cr2, %rax", .noinstr.text);
 #endif
 
 DEFINE_STATIC_KEY_TRUE(virt_spin_lock_key);
@@ -85,28 +65,6 @@ static void native_tlb_remove_table(struct mmu_gather *tlb, void *table)
 	tlb_remove_page(tlb, table);
 }
 
-unsigned int paravirt_patch(u8 type, void *insn_buff, unsigned long addr,
-			    unsigned int len)
-{
-	/*
-	 * Neat trick to map patch type back to the call within the
-	 * corresponding structure.
-	 */
-	void *opfunc = *((void **)&pv_ops + type);
-	unsigned ret;
-
-	if (opfunc == NULL)
-		/* If there's no function, patch it with paravirt_BUG() */
-		ret = paravirt_patch_call(insn_buff, paravirt_BUG, addr, len);
-	else if (opfunc == _paravirt_nop)
-		ret = 0;
-	else
-		/* Otherwise call the function. */
-		ret = paravirt_patch_call(insn_buff, opfunc, addr, len);
-
-	return ret;
-}
-
 struct static_key paravirt_steal_enabled;
 struct static_key paravirt_steal_rq_enabled;
 
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index b6f4e8399fca..ab49ade31b0d 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -477,7 +477,7 @@ void native_tss_update_io_bitmap(void)
 	/*
 	 * Make sure that the TSS limit is covering the IO bitmap. It might have
 	 * been cut down by a VMEXIT to 0x67 which would cause a subsequent I/O
-	 * access from user space to trigger a #GP because tbe bitmap is outside
+	 * access from user space to trigger a #GP because the bitmap is outside
 	 * the TSS limit.
 	 */
 	refresh_tss_limit();
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 1309b9b05338..2e7066980f3e 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -67,7 +67,7 @@ void mach_get_cmos_time(struct timespec64 *now)
 		return;
 	}
 
-	if (mc146818_get_time(&tm)) {
+	if (mc146818_get_time(&tm, 1000)) {
 		pr_err("Unable to read current time from RTC\n");
 		now->tv_sec = now->tv_nsec = 0;
 		return;
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 1526747bedf2..84201071dfac 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -226,8 +226,6 @@ static void __init reserve_brk(void)
 	_brk_start = 0;
 }
 
-u64 relocated_ramdisk;
-
 #ifdef CONFIG_BLK_DEV_INITRD
 
 static u64 __init get_ramdisk_image(void)
@@ -261,7 +259,7 @@ static void __init relocate_initrd(void)
 	u64 area_size     = PAGE_ALIGN(ramdisk_size);
 
 	/* We need to move the initrd down into directly mapped mem */
-	relocated_ramdisk = memblock_phys_alloc_range(area_size, PAGE_SIZE, 0,
+	u64 relocated_ramdisk = memblock_phys_alloc_range(area_size, PAGE_SIZE, 0,
 						      PFN_PHYS(max_pfn_mapped));
 	if (!relocated_ramdisk)
 		panic("Cannot find place for new RAMDISK of size %lld\n",
@@ -1033,6 +1031,8 @@ void __init setup_arch(char **cmdline_p)
 	 *
 	 * Moreover, on machines with SandyBridge graphics or in setups that use
 	 * crashkernel the entire 1M is reserved anyway.
+	 *
+	 * Note the host kernel TDX also requires the first 1MB being reserved.
 	 */
 	x86_platform.realmode_reserve();
 
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 2c97bf7b56ae..b30d6e180df7 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -106,8 +106,8 @@ void __init pcpu_populate_pte(unsigned long addr)
 static inline void setup_percpu_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
-	struct desc_struct d = GDT_ENTRY_INIT(0x8092, per_cpu_offset(cpu),
-					      0xFFFFF);
+	struct desc_struct d = GDT_ENTRY_INIT(DESC_DATA32,
+					      per_cpu_offset(cpu), 0xFFFFF);
 
 	write_gdt_entry(get_cpu_gdt_rw(cpu), GDT_ENTRY_PERCPU, &d, DESCTYPE_S);
 #endif
diff --git a/arch/x86/kernel/sev-shared.c b/arch/x86/kernel/sev-shared.c
index ccb0915e84e1..1d24ec679915 100644
--- a/arch/x86/kernel/sev-shared.c
+++ b/arch/x86/kernel/sev-shared.c
@@ -96,7 +96,7 @@ static void __noreturn sev_es_terminate(unsigned int set, unsigned int reason)
 	/* Tell the hypervisor what went wrong. */
 	val |= GHCB_SEV_TERM_REASON(set, reason);
 
-	/* Request Guest Termination from Hypvervisor */
+	/* Request Guest Termination from Hypervisor */
 	sev_es_wr_ghcb_msr(val);
 	VMGEXIT();
 
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 65fe2094da59..31b6f5dddfc2 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -27,6 +27,7 @@
 #include <linux/context_tracking.h>
 #include <linux/entry-common.h>
 #include <linux/syscalls.h>
+#include <linux/rseq.h>
 
 #include <asm/processor.h>
 #include <asm/ucontext.h>
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 2cc2aa120b4b..3f57ce68a3f1 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -757,6 +757,7 @@ const struct cpumask *cpu_clustergroup_mask(int cpu)
 {
 	return cpu_l2c_shared_mask(cpu);
 }
+EXPORT_SYMBOL_GPL(cpu_clustergroup_mask);
 
 static void impress_friends(void)
 {
diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c
index 0bab03130033..d42c28b8bfd8 100644
--- a/arch/x86/kernel/topology.c
+++ b/arch/x86/kernel/topology.c
@@ -35,38 +35,9 @@
 #include <asm/io_apic.h>
 #include <asm/cpu.h>
 
-static DEFINE_PER_CPU(struct x86_cpu, cpu_devices);
-
 #ifdef CONFIG_HOTPLUG_CPU
-int arch_register_cpu(int cpu)
+bool arch_cpu_is_hotpluggable(int cpu)
 {
-	struct x86_cpu *xc = per_cpu_ptr(&cpu_devices, cpu);
-
-	xc->cpu.hotpluggable = cpu > 0;
-	return register_cpu(&xc->cpu, cpu);
-}
-EXPORT_SYMBOL(arch_register_cpu);
-
-void arch_unregister_cpu(int num)
-{
-	unregister_cpu(&per_cpu(cpu_devices, num).cpu);
-}
-EXPORT_SYMBOL(arch_unregister_cpu);
-#else /* CONFIG_HOTPLUG_CPU */
-
-int __init arch_register_cpu(int num)
-{
-	return register_cpu(&per_cpu(cpu_devices, num).cpu, num);
+	return cpu > 0;
 }
 #endif /* CONFIG_HOTPLUG_CPU */
-
-static int __init topology_init(void)
-{
-	int i;
-
-	for_each_present_cpu(i)
-		arch_register_cpu(i);
-
-	return 0;
-}
-subsys_initcall(topology_init);
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index c876f1d36a81..c3b2f863acf0 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -37,6 +37,7 @@
 #include <linux/nmi.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
+#include <linux/cpu.h>
 #include <linux/io.h>
 #include <linux/hardirq.h>
 #include <linux/atomic.h>
@@ -565,7 +566,7 @@ static bool fixup_iopl_exception(struct pt_regs *regs)
  */
 static bool try_fixup_enqcmd_gp(void)
 {
-#ifdef CONFIG_IOMMU_SVA
+#ifdef CONFIG_ARCH_HAS_CPU_PASID
 	u32 pasid;
 
 	/*
@@ -591,7 +592,7 @@ static bool try_fixup_enqcmd_gp(void)
 	if (!mm_valid_pasid(current->mm))
 		return false;
 
-	pasid = current->mm->pasid;
+	pasid = mm_get_enqcmd_pasid(current->mm);
 
 	/*
 	 * Did this thread already have its PASID activated?
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 54a5596adaa6..a349dbfc6d5a 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -267,19 +267,6 @@ SECTIONS
 	}
 #endif
 
-	/*
-	 * start address and size of operations which during runtime
-	 * can be patched with virtualization friendly instructions or
-	 * baremetal native ones. Think page table operations.
-	 * Details in paravirt_types.h
-	 */
-	. = ALIGN(8);
-	.parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
-		__parainstructions = .;
-		*(.parainstructions)
-		__parainstructions_end = .;
-	}
-
 #ifdef CONFIG_RETPOLINE
 	/*
 	 * List of instructions that call/jmp/jcc to retpoline thunks
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 950c12868d30..65ed14b6540b 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -23,17 +23,15 @@ config KVM
 	depends on HAVE_KVM
 	depends on HIGH_RES_TIMERS
 	depends on X86_LOCAL_APIC
-	select PREEMPT_NOTIFIERS
-	select MMU_NOTIFIER
+	select KVM_COMMON
+	select KVM_GENERIC_MMU_NOTIFIER
 	select HAVE_KVM_IRQCHIP
 	select HAVE_KVM_PFNCACHE
-	select HAVE_KVM_IRQFD
 	select HAVE_KVM_DIRTY_RING_TSO
 	select HAVE_KVM_DIRTY_RING_ACQ_REL
 	select IRQ_BYPASS_MANAGER
 	select HAVE_KVM_IRQ_BYPASS
 	select HAVE_KVM_IRQ_ROUTING
-	select HAVE_KVM_EVENTFD
 	select KVM_ASYNC_PF
 	select USER_RETURN_NOTIFIER
 	select KVM_MMIO
@@ -46,7 +44,6 @@ config KVM
 	select KVM_XFER_TO_GUEST_WORK
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
 	select KVM_VFIO
-	select INTERVAL_TREE
 	select HAVE_KVM_PM_NOTIFIER if PM
 	select KVM_GENERIC_HARDWARE_ENABLING
 	help
@@ -65,18 +62,31 @@ config KVM
 
 config KVM_WERROR
 	bool "Compile KVM with -Werror"
-	# KASAN may cause the build to fail due to larger frames
-	default y if X86_64 && !KASAN
-	# We use the dependency on !COMPILE_TEST to not be enabled
-	# blindly in allmodconfig or allyesconfig configurations
-	depends on KVM
-	depends on (X86_64 && !KASAN) || !COMPILE_TEST
-	depends on EXPERT
+	# Disallow KVM's -Werror if KASAN is enabled, e.g. to guard against
+	# randomized configs from selecting KVM_WERROR=y, which doesn't play
+	# nice with KASAN.  KASAN builds generates warnings for the default
+	# FRAME_WARN, i.e. KVM_WERROR=y with KASAN=y requires special tuning.
+	# Building KVM with -Werror and KASAN is still doable via enabling
+	# the kernel-wide WERROR=y.
+	depends on KVM && EXPERT && !KASAN
 	help
 	  Add -Werror to the build flags for KVM.
 
 	  If in doubt, say "N".
 
+config KVM_SW_PROTECTED_VM
+	bool "Enable support for KVM software-protected VMs"
+	depends on EXPERT
+	depends on KVM && X86_64
+	select KVM_GENERIC_PRIVATE_MEM
+	help
+	  Enable support for KVM software-protected VMs.  Currently, software-
+	  protected VMs are purely a development and testing vehicle for
+	  KVM_CREATE_GUEST_MEMFD.  Attempting to run a "real" VM workload as a
+	  software-protected VM will fail miserably.
+
+	  If unsure, say "N".
+
 config KVM_INTEL
 	tristate "KVM for Intel (and compatible) processors support"
 	depends on KVM && IA32_FEAT_CTL
@@ -129,6 +139,20 @@ config KVM_SMM
 
 	  If unsure, say Y.
 
+config KVM_HYPERV
+	bool "Support for Microsoft Hyper-V emulation"
+	depends on KVM
+	default y
+	help
+	  Provides KVM support for emulating Microsoft Hyper-V.  This allows KVM
+	  to expose a subset of the paravirtualized interfaces defined in the
+	  Hyper-V Hypervisor Top-Level Functional Specification (TLFS):
+	  https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs
+	  These interfaces are required for the correct and performant functioning
+	  of Windows and Hyper-V guests on KVM.
+
+	  If unsure, say "Y".
+
 config KVM_XEN
 	bool "Support for Xen hypercall interface"
 	depends on KVM
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index 80e3fe184d17..475b5fa917a6 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -11,25 +11,27 @@ include $(srctree)/virt/kvm/Makefile.kvm
 
 kvm-y			+= x86.o emulate.o i8259.o irq.o lapic.o \
 			   i8254.o ioapic.o irq_comm.o cpuid.o pmu.o mtrr.o \
-			   hyperv.o debugfs.o mmu/mmu.o mmu/page_track.o \
+			   debugfs.o mmu/mmu.o mmu/page_track.o \
 			   mmu/spte.o
 
-ifdef CONFIG_HYPERV
-kvm-y			+= kvm_onhyperv.o
-endif
-
 kvm-$(CONFIG_X86_64) += mmu/tdp_iter.o mmu/tdp_mmu.o
+kvm-$(CONFIG_KVM_HYPERV) += hyperv.o
 kvm-$(CONFIG_KVM_XEN)	+= xen.o
 kvm-$(CONFIG_KVM_SMM)	+= smm.o
 
 kvm-intel-y		+= vmx/vmx.o vmx/vmenter.o vmx/pmu_intel.o vmx/vmcs12.o \
-			   vmx/hyperv.o vmx/nested.o vmx/posted_intr.o
+			   vmx/nested.o vmx/posted_intr.o
+
 kvm-intel-$(CONFIG_X86_SGX_KVM)	+= vmx/sgx.o
+kvm-intel-$(CONFIG_KVM_HYPERV)	+= vmx/hyperv.o vmx/hyperv_evmcs.o
 
 kvm-amd-y		+= svm/svm.o svm/vmenter.o svm/pmu.o svm/nested.o svm/avic.o \
-			   svm/sev.o svm/hyperv.o
+			   svm/sev.o
+kvm-amd-$(CONFIG_KVM_HYPERV) += svm/hyperv.o
 
 ifdef CONFIG_HYPERV
+kvm-y			+= kvm_onhyperv.o
+kvm-intel-y		+= vmx/vmx_onhyperv.o vmx/hyperv_evmcs.o
 kvm-amd-y		+= svm/svm_onhyperv.o
 endif
 
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index dda6fc4cfae8..adba49afb5fe 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -105,7 +105,7 @@ static inline struct kvm_cpuid_entry2 *cpuid_entry2_find(
 
 		/*
 		 * If the index isn't significant, use the first entry with a
-		 * matching function.  It's userspace's responsibilty to not
+		 * matching function.  It's userspace's responsibility to not
 		 * provide "duplicate" entries in all cases.
 		 */
 		if (!(e->flags & KVM_CPUID_FLAG_SIGNIFCANT_INDEX) || e->index == index)
@@ -314,11 +314,15 @@ EXPORT_SYMBOL_GPL(kvm_update_cpuid_runtime);
 
 static bool kvm_cpuid_has_hyperv(struct kvm_cpuid_entry2 *entries, int nent)
 {
+#ifdef CONFIG_KVM_HYPERV
 	struct kvm_cpuid_entry2 *entry;
 
 	entry = cpuid_entry2_find(entries, nent, HYPERV_CPUID_INTERFACE,
 				  KVM_CPUID_INDEX_NOT_SIGNIFICANT);
 	return entry && entry->eax == HYPERV_CPUID_SIGNATURE_EAX;
+#else
+	return false;
+#endif
 }
 
 static void kvm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu)
@@ -433,11 +437,13 @@ static int kvm_set_cpuid(struct kvm_vcpu *vcpu, struct kvm_cpuid_entry2 *e2,
 		return 0;
 	}
 
+#ifdef CONFIG_KVM_HYPERV
 	if (kvm_cpuid_has_hyperv(e2, nent)) {
 		r = kvm_hv_vcpu_init(vcpu);
 		if (r)
 			return r;
 	}
+#endif
 
 	r = kvm_check_cpuid(vcpu, e2, nent);
 	if (r)
@@ -469,7 +475,7 @@ int kvm_vcpu_ioctl_set_cpuid(struct kvm_vcpu *vcpu,
 		return -E2BIG;
 
 	if (cpuid->nent) {
-		e = vmemdup_user(entries, array_size(sizeof(*e), cpuid->nent));
+		e = vmemdup_array_user(entries, cpuid->nent, sizeof(*e));
 		if (IS_ERR(e))
 			return PTR_ERR(e);
 
@@ -513,7 +519,7 @@ int kvm_vcpu_ioctl_set_cpuid2(struct kvm_vcpu *vcpu,
 		return -E2BIG;
 
 	if (cpuid->nent) {
-		e2 = vmemdup_user(entries, array_size(sizeof(*e2), cpuid->nent));
+		e2 = vmemdup_array_user(entries, cpuid->nent, sizeof(*e2));
 		if (IS_ERR(e2))
 			return PTR_ERR(e2);
 	}
@@ -671,7 +677,7 @@ void kvm_set_cpu_caps(void)
 	kvm_cpu_cap_mask(CPUID_7_1_EAX,
 		F(AVX_VNNI) | F(AVX512_BF16) | F(CMPCCXADD) |
 		F(FZRM) | F(FSRS) | F(FSRC) |
-		F(AMX_FP16) | F(AVX_IFMA)
+		F(AMX_FP16) | F(AVX_IFMA) | F(LAM)
 	);
 
 	kvm_cpu_cap_init_kvm_defined(CPUID_7_1_EDX,
@@ -679,6 +685,11 @@ void kvm_set_cpu_caps(void)
 		F(AMX_COMPLEX)
 	);
 
+	kvm_cpu_cap_init_kvm_defined(CPUID_7_2_EDX,
+		F(INTEL_PSFD) | F(IPRED_CTRL) | F(RRSBA_CTRL) | F(DDPD_U) |
+		F(BHI_CTRL) | F(MCDT_NO)
+	);
+
 	kvm_cpu_cap_mask(CPUID_D_1_EAX,
 		F(XSAVEOPT) | F(XSAVEC) | F(XGETBV1) | F(XSAVES) | f_xfd
 	);
@@ -960,13 +971,13 @@ static inline int __do_cpuid_func(struct kvm_cpuid_array *array, u32 function)
 		break;
 	/* function 7 has additional index. */
 	case 7:
-		entry->eax = min(entry->eax, 1u);
+		max_idx = entry->eax = min(entry->eax, 2u);
 		cpuid_entry_override(entry, CPUID_7_0_EBX);
 		cpuid_entry_override(entry, CPUID_7_ECX);
 		cpuid_entry_override(entry, CPUID_7_EDX);
 
-		/* KVM only supports 0x7.0 and 0x7.1, capped above via min(). */
-		if (entry->eax == 1) {
+		/* KVM only supports up to 0x7.2, capped above via min(). */
+		if (max_idx >= 1) {
 			entry = do_host_cpuid(array, function, 1);
 			if (!entry)
 				goto out;
@@ -976,6 +987,16 @@ static inline int __do_cpuid_func(struct kvm_cpuid_array *array, u32 function)
 			entry->ebx = 0;
 			entry->ecx = 0;
 		}
+		if (max_idx >= 2) {
+			entry = do_host_cpuid(array, function, 2);
+			if (!entry)
+				goto out;
+
+			cpuid_entry_override(entry, CPUID_7_2_EDX);
+			entry->ecx = 0;
+			entry->ebx = 0;
+			entry->eax = 0;
+		}
 		break;
 	case 0xa: { /* Architectural Performance Monitoring */
 		union cpuid10_eax eax;
diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h
index 0b90532b6e26..856e3037e74f 100644
--- a/arch/x86/kvm/cpuid.h
+++ b/arch/x86/kvm/cpuid.h
@@ -47,11 +47,6 @@ static inline bool kvm_vcpu_is_legal_gpa(struct kvm_vcpu *vcpu, gpa_t gpa)
 	return !(gpa & vcpu->arch.reserved_gpa_bits);
 }
 
-static inline bool kvm_vcpu_is_illegal_gpa(struct kvm_vcpu *vcpu, gpa_t gpa)
-{
-	return !kvm_vcpu_is_legal_gpa(vcpu, gpa);
-}
-
 static inline bool kvm_vcpu_is_legal_aligned_gpa(struct kvm_vcpu *vcpu,
 						 gpa_t gpa, gpa_t alignment)
 {
@@ -279,4 +274,12 @@ static __always_inline bool guest_can_use(struct kvm_vcpu *vcpu,
 			vcpu->arch.governed_features.enabled);
 }
 
+static inline bool kvm_vcpu_is_legal_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
+{
+	if (guest_can_use(vcpu, X86_FEATURE_LAM))
+		cr3 &= ~(X86_CR3_LAM_U48 | X86_CR3_LAM_U57);
+
+	return kvm_vcpu_is_legal_gpa(vcpu, cr3);
+}
+
 #endif
diff --git a/arch/x86/kvm/debugfs.c b/arch/x86/kvm/debugfs.c
index eea6ea7f14af..95ea1a1f7403 100644
--- a/arch/x86/kvm/debugfs.c
+++ b/arch/x86/kvm/debugfs.c
@@ -111,7 +111,7 @@ static int kvm_mmu_rmaps_stat_show(struct seq_file *m, void *v)
 	mutex_lock(&kvm->slots_lock);
 	write_lock(&kvm->mmu_lock);
 
-	for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) {
+	for (i = 0; i < kvm_arch_nr_memslot_as_ids(kvm); i++) {
 		int bkt;
 
 		slots = __kvm_memslots(kvm, i);
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 2673cd5c46cb..e223043ef5b2 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -687,8 +687,8 @@ static unsigned insn_alignment(struct x86_emulate_ctxt *ctxt, unsigned size)
 static __always_inline int __linearize(struct x86_emulate_ctxt *ctxt,
 				       struct segmented_address addr,
 				       unsigned *max_size, unsigned size,
-				       bool write, bool fetch,
-				       enum x86emul_mode mode, ulong *linear)
+				       enum x86emul_mode mode, ulong *linear,
+				       unsigned int flags)
 {
 	struct desc_struct desc;
 	bool usable;
@@ -701,7 +701,7 @@ static __always_inline int __linearize(struct x86_emulate_ctxt *ctxt,
 	*max_size = 0;
 	switch (mode) {
 	case X86EMUL_MODE_PROT64:
-		*linear = la;
+		*linear = la = ctxt->ops->get_untagged_addr(ctxt, la, flags);
 		va_bits = ctxt_virt_addr_bits(ctxt);
 		if (!__is_canonical_address(la, va_bits))
 			goto bad;
@@ -717,11 +717,11 @@ static __always_inline int __linearize(struct x86_emulate_ctxt *ctxt,
 		if (!usable)
 			goto bad;
 		/* code segment in protected mode or read-only data segment */
-		if ((((ctxt->mode != X86EMUL_MODE_REAL) && (desc.type & 8))
-					|| !(desc.type & 2)) && write)
+		if ((((ctxt->mode != X86EMUL_MODE_REAL) && (desc.type & 8)) || !(desc.type & 2)) &&
+		    (flags & X86EMUL_F_WRITE))
 			goto bad;
 		/* unreadable code segment */
-		if (!fetch && (desc.type & 8) && !(desc.type & 2))
+		if (!(flags & X86EMUL_F_FETCH) && (desc.type & 8) && !(desc.type & 2))
 			goto bad;
 		lim = desc_limit_scaled(&desc);
 		if (!(desc.type & 8) && (desc.type & 4)) {
@@ -757,8 +757,8 @@ static int linearize(struct x86_emulate_ctxt *ctxt,
 		     ulong *linear)
 {
 	unsigned max_size;
-	return __linearize(ctxt, addr, &max_size, size, write, false,
-			   ctxt->mode, linear);
+	return __linearize(ctxt, addr, &max_size, size, ctxt->mode, linear,
+			   write ? X86EMUL_F_WRITE : 0);
 }
 
 static inline int assign_eip(struct x86_emulate_ctxt *ctxt, ulong dst)
@@ -771,7 +771,8 @@ static inline int assign_eip(struct x86_emulate_ctxt *ctxt, ulong dst)
 
 	if (ctxt->op_bytes != sizeof(unsigned long))
 		addr.ea = dst & ((1UL << (ctxt->op_bytes << 3)) - 1);
-	rc = __linearize(ctxt, addr, &max_size, 1, false, true, ctxt->mode, &linear);
+	rc = __linearize(ctxt, addr, &max_size, 1, ctxt->mode, &linear,
+			 X86EMUL_F_FETCH);
 	if (rc == X86EMUL_CONTINUE)
 		ctxt->_eip = addr.ea;
 	return rc;
@@ -907,8 +908,8 @@ static int __do_insn_fetch_bytes(struct x86_emulate_ctxt *ctxt, int op_size)
 	 * boundary check itself.  Instead, we use max_size to check
 	 * against op_size.
 	 */
-	rc = __linearize(ctxt, addr, &max_size, 0, false, true, ctxt->mode,
-			 &linear);
+	rc = __linearize(ctxt, addr, &max_size, 0, ctxt->mode, &linear,
+			 X86EMUL_F_FETCH);
 	if (unlikely(rc != X86EMUL_CONTINUE))
 		return rc;
 
@@ -3439,8 +3440,10 @@ static int em_invlpg(struct x86_emulate_ctxt *ctxt)
 {
 	int rc;
 	ulong linear;
+	unsigned int max_size;
 
-	rc = linearize(ctxt, ctxt->src.addr.mem, 1, false, &linear);
+	rc = __linearize(ctxt, ctxt->src.addr.mem, &max_size, 1, ctxt->mode,
+			 &linear, X86EMUL_F_INVLPG);
 	if (rc == X86EMUL_CONTINUE)
 		ctxt->ops->invlpg(ctxt, linear);
 	/* Disable writeback. */
diff --git a/arch/x86/kvm/governed_features.h b/arch/x86/kvm/governed_features.h
index 423a73395c10..ad463b1ed4e4 100644
--- a/arch/x86/kvm/governed_features.h
+++ b/arch/x86/kvm/governed_features.h
@@ -16,6 +16,7 @@ KVM_GOVERNED_X86_FEATURE(PAUSEFILTER)
 KVM_GOVERNED_X86_FEATURE(PFTHRESHOLD)
 KVM_GOVERNED_X86_FEATURE(VGIF)
 KVM_GOVERNED_X86_FEATURE(VNMI)
+KVM_GOVERNED_X86_FEATURE(LAM)
 
 #undef KVM_GOVERNED_X86_FEATURE
 #undef KVM_GOVERNED_FEATURE
diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index 238afd7335e4..8a47f8541eab 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -1322,6 +1322,56 @@ static bool hv_check_msr_access(struct kvm_vcpu_hv *hv_vcpu, u32 msr)
 	return false;
 }
 
+#define KVM_HV_WIN2016_GUEST_ID 0x1040a00003839
+#define KVM_HV_WIN2016_GUEST_ID_MASK (~GENMASK_ULL(23, 16)) /* mask out the service version */
+
+/*
+ * Hyper-V enabled Windows Server 2016 SMP VMs fail to boot in !XSAVES && XSAVEC
+ * configuration.
+ * Such configuration can result from, for example, AMD Erratum 1386 workaround.
+ *
+ * Print a notice so users aren't left wondering what's suddenly gone wrong.
+ */
+static void __kvm_hv_xsaves_xsavec_maybe_warn(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = vcpu->kvm;
+	struct kvm_hv *hv = to_kvm_hv(kvm);
+
+	/* Check again under the hv_lock.  */
+	if (hv->xsaves_xsavec_checked)
+		return;
+
+	if ((hv->hv_guest_os_id & KVM_HV_WIN2016_GUEST_ID_MASK) !=
+	    KVM_HV_WIN2016_GUEST_ID)
+		return;
+
+	hv->xsaves_xsavec_checked = true;
+
+	/* UP configurations aren't affected */
+	if (atomic_read(&kvm->online_vcpus) < 2)
+		return;
+
+	if (guest_cpuid_has(vcpu, X86_FEATURE_XSAVES) ||
+	    !guest_cpuid_has(vcpu, X86_FEATURE_XSAVEC))
+		return;
+
+	pr_notice_ratelimited("Booting SMP Windows KVM VM with !XSAVES && XSAVEC. "
+			      "If it fails to boot try disabling XSAVEC in the VM config.\n");
+}
+
+void kvm_hv_xsaves_xsavec_maybe_warn(struct kvm_vcpu *vcpu)
+{
+	struct kvm_hv *hv = to_kvm_hv(vcpu->kvm);
+
+	if (!vcpu->arch.hyperv_enabled ||
+	    hv->xsaves_xsavec_checked)
+		return;
+
+	mutex_lock(&hv->hv_lock);
+	__kvm_hv_xsaves_xsavec_maybe_warn(vcpu);
+	mutex_unlock(&hv->hv_lock);
+}
+
 static int kvm_hv_set_msr_pw(struct kvm_vcpu *vcpu, u32 msr, u64 data,
 			     bool host)
 {
@@ -2388,7 +2438,7 @@ static u16 kvm_hvcall_signal_event(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *h
 	if (!eventfd)
 		return HV_STATUS_INVALID_PORT_ID;
 
-	eventfd_signal(eventfd, 1);
+	eventfd_signal(eventfd);
 	return HV_STATUS_SUCCESS;
 }
 
diff --git a/arch/x86/kvm/hyperv.h b/arch/x86/kvm/hyperv.h
index f83b8db72b11..923e64903da9 100644
--- a/arch/x86/kvm/hyperv.h
+++ b/arch/x86/kvm/hyperv.h
@@ -24,6 +24,8 @@
 #include <linux/kvm_host.h>
 #include "x86.h"
 
+#ifdef CONFIG_KVM_HYPERV
+
 /* "Hv#1" signature */
 #define HYPERV_CPUID_SIGNATURE_EAX 0x31237648
 
@@ -105,6 +107,17 @@ int kvm_hv_synic_set_irq(struct kvm *kvm, u32 vcpu_id, u32 sint);
 void kvm_hv_synic_send_eoi(struct kvm_vcpu *vcpu, int vector);
 int kvm_hv_activate_synic(struct kvm_vcpu *vcpu, bool dont_zero_synic_pages);
 
+static inline bool kvm_hv_synic_has_vector(struct kvm_vcpu *vcpu, int vector)
+{
+	return to_hv_vcpu(vcpu) && test_bit(vector, to_hv_synic(vcpu)->vec_bitmap);
+}
+
+static inline bool kvm_hv_synic_auto_eoi_set(struct kvm_vcpu *vcpu, int vector)
+{
+	return to_hv_vcpu(vcpu) &&
+	       test_bit(vector, to_hv_synic(vcpu)->auto_eoi_bitmap);
+}
+
 void kvm_hv_vcpu_uninit(struct kvm_vcpu *vcpu);
 
 bool kvm_hv_assist_page_enabled(struct kvm_vcpu *vcpu);
@@ -169,6 +182,8 @@ void kvm_hv_setup_tsc_page(struct kvm *kvm,
 			   struct pvclock_vcpu_time_info *hv_clock);
 void kvm_hv_request_tsc_page_update(struct kvm *kvm);
 
+void kvm_hv_xsaves_xsavec_maybe_warn(struct kvm_vcpu *vcpu);
+
 void kvm_hv_init_vm(struct kvm *kvm);
 void kvm_hv_destroy_vm(struct kvm *kvm);
 int kvm_hv_vcpu_init(struct kvm_vcpu *vcpu);
@@ -236,6 +251,77 @@ static inline int kvm_hv_verify_vp_assist(struct kvm_vcpu *vcpu)
 	return kvm_hv_get_assist_page(vcpu);
 }
 
+static inline void kvm_hv_nested_transtion_tlb_flush(struct kvm_vcpu *vcpu,
+						     bool tdp_enabled)
+{
+	/*
+	 * KVM_REQ_HV_TLB_FLUSH flushes entries from either L1's VP_ID or
+	 * L2's VP_ID upon request from the guest. Make sure we check for
+	 * pending entries in the right FIFO upon L1/L2 transition as these
+	 * requests are put by other vCPUs asynchronously.
+	 */
+	if (to_hv_vcpu(vcpu) && tdp_enabled)
+		kvm_make_request(KVM_REQ_HV_TLB_FLUSH, vcpu);
+}
+
 int kvm_hv_vcpu_flush_tlb(struct kvm_vcpu *vcpu);
+#else /* CONFIG_KVM_HYPERV */
+static inline void kvm_hv_setup_tsc_page(struct kvm *kvm,
+					 struct pvclock_vcpu_time_info *hv_clock) {}
+static inline void kvm_hv_request_tsc_page_update(struct kvm *kvm) {}
+static inline void kvm_hv_xsaves_xsavec_maybe_warn(struct kvm_vcpu *vcpu) {}
+static inline void kvm_hv_init_vm(struct kvm *kvm) {}
+static inline void kvm_hv_destroy_vm(struct kvm *kvm) {}
+static inline int kvm_hv_vcpu_init(struct kvm_vcpu *vcpu)
+{
+	return 0;
+}
+static inline void kvm_hv_vcpu_uninit(struct kvm_vcpu *vcpu) {}
+static inline bool kvm_hv_hypercall_enabled(struct kvm_vcpu *vcpu)
+{
+	return false;
+}
+static inline int kvm_hv_hypercall(struct kvm_vcpu *vcpu)
+{
+	return HV_STATUS_ACCESS_DENIED;
+}
+static inline void kvm_hv_vcpu_purge_flush_tlb(struct kvm_vcpu *vcpu) {}
+static inline void kvm_hv_free_pa_page(struct kvm *kvm) {}
+static inline bool kvm_hv_synic_has_vector(struct kvm_vcpu *vcpu, int vector)
+{
+	return false;
+}
+static inline bool kvm_hv_synic_auto_eoi_set(struct kvm_vcpu *vcpu, int vector)
+{
+	return false;
+}
+static inline void kvm_hv_synic_send_eoi(struct kvm_vcpu *vcpu, int vector) {}
+static inline bool kvm_hv_invtsc_suppressed(struct kvm_vcpu *vcpu)
+{
+	return false;
+}
+static inline void kvm_hv_set_cpuid(struct kvm_vcpu *vcpu, bool hyperv_enabled) {}
+static inline bool kvm_hv_has_stimer_pending(struct kvm_vcpu *vcpu)
+{
+	return false;
+}
+static inline bool kvm_hv_is_tlb_flush_hcall(struct kvm_vcpu *vcpu)
+{
+	return false;
+}
+static inline bool guest_hv_cpuid_has_l2_tlb_flush(struct kvm_vcpu *vcpu)
+{
+	return false;
+}
+static inline int kvm_hv_verify_vp_assist(struct kvm_vcpu *vcpu)
+{
+	return 0;
+}
+static inline u32 kvm_hv_get_vpindex(struct kvm_vcpu *vcpu)
+{
+	return vcpu->vcpu_idx;
+}
+static inline void kvm_hv_nested_transtion_tlb_flush(struct kvm_vcpu *vcpu, bool tdp_enabled) {}
+#endif /* CONFIG_KVM_HYPERV */
 
-#endif
+#endif /* __ARCH_X86_KVM_HYPERV_H__ */
diff --git a/arch/x86/kvm/irq.c b/arch/x86/kvm/irq.c
index b2c397dd2bc6..ad9ca8a60144 100644
--- a/arch/x86/kvm/irq.c
+++ b/arch/x86/kvm/irq.c
@@ -118,8 +118,10 @@ static int kvm_cpu_get_extint(struct kvm_vcpu *v)
 	if (!lapic_in_kernel(v))
 		return v->arch.interrupt.nr;
 
+#ifdef CONFIG_KVM_XEN
 	if (kvm_xen_has_interrupt(v))
 		return v->kvm->arch.xen.upcall_vector;
+#endif
 
 	if (irqchip_split(v->kvm)) {
 		int vector = v->arch.pending_external_vector;
diff --git a/arch/x86/kvm/irq_comm.c b/arch/x86/kvm/irq_comm.c
index 16d076a1b91a..68f3f6c26046 100644
--- a/arch/x86/kvm/irq_comm.c
+++ b/arch/x86/kvm/irq_comm.c
@@ -144,7 +144,7 @@ int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e,
 	return kvm_irq_delivery_to_apic(kvm, NULL, &irq, NULL);
 }
 
-
+#ifdef CONFIG_KVM_HYPERV
 static int kvm_hv_set_sint(struct kvm_kernel_irq_routing_entry *e,
 		    struct kvm *kvm, int irq_source_id, int level,
 		    bool line_status)
@@ -154,6 +154,7 @@ static int kvm_hv_set_sint(struct kvm_kernel_irq_routing_entry *e,
 
 	return kvm_hv_synic_set_irq(kvm, e->hv_sint.vcpu, e->hv_sint.sint);
 }
+#endif
 
 int kvm_arch_set_irq_inatomic(struct kvm_kernel_irq_routing_entry *e,
 			      struct kvm *kvm, int irq_source_id, int level,
@@ -163,9 +164,11 @@ int kvm_arch_set_irq_inatomic(struct kvm_kernel_irq_routing_entry *e,
 	int r;
 
 	switch (e->type) {
+#ifdef CONFIG_KVM_HYPERV
 	case KVM_IRQ_ROUTING_HV_SINT:
 		return kvm_hv_set_sint(e, kvm, irq_source_id, level,
 				       line_status);
+#endif
 
 	case KVM_IRQ_ROUTING_MSI:
 		if (kvm_msi_route_invalid(kvm, e))
@@ -314,11 +317,13 @@ int kvm_set_routing_entry(struct kvm *kvm,
 		if (kvm_msi_route_invalid(kvm, e))
 			return -EINVAL;
 		break;
+#ifdef CONFIG_KVM_HYPERV
 	case KVM_IRQ_ROUTING_HV_SINT:
 		e->set = kvm_hv_set_sint;
 		e->hv_sint.vcpu = ue->u.hv_sint.vcpu;
 		e->hv_sint.sint = ue->u.hv_sint.sint;
 		break;
+#endif
 #ifdef CONFIG_KVM_XEN
 	case KVM_IRQ_ROUTING_XEN_EVTCHN:
 		return kvm_xen_setup_evtchn(kvm, e, ue);
@@ -438,5 +443,7 @@ void kvm_scan_ioapic_routes(struct kvm_vcpu *vcpu,
 
 void kvm_arch_irq_routing_update(struct kvm *kvm)
 {
+#ifdef CONFIG_KVM_HYPERV
 	kvm_hv_irq_routing_update(kvm);
+#endif
 }
diff --git a/arch/x86/kvm/kvm_emulate.h b/arch/x86/kvm/kvm_emulate.h
index be7aeb9b8ea3..e6d149825169 100644
--- a/arch/x86/kvm/kvm_emulate.h
+++ b/arch/x86/kvm/kvm_emulate.h
@@ -88,6 +88,12 @@ struct x86_instruction_info {
 #define X86EMUL_IO_NEEDED       5 /* IO is needed to complete emulation */
 #define X86EMUL_INTERCEPTED     6 /* Intercepted by nested VMCB/VMCS */
 
+/* x86-specific emulation flags */
+#define X86EMUL_F_WRITE			BIT(0)
+#define X86EMUL_F_FETCH			BIT(1)
+#define X86EMUL_F_IMPLICIT		BIT(2)
+#define X86EMUL_F_INVLPG		BIT(3)
+
 struct x86_emulate_ops {
 	void (*vm_bugged)(struct x86_emulate_ctxt *ctxt);
 	/*
@@ -224,6 +230,9 @@ struct x86_emulate_ops {
 	int (*leave_smm)(struct x86_emulate_ctxt *ctxt);
 	void (*triple_fault)(struct x86_emulate_ctxt *ctxt);
 	int (*set_xcr)(struct x86_emulate_ctxt *ctxt, u32 index, u64 xcr);
+
+	gva_t (*get_untagged_addr)(struct x86_emulate_ctxt *ctxt, gva_t addr,
+				   unsigned int flags);
 };
 
 /* Type, address-of, and value of an instruction's operand. */
diff --git a/arch/x86/kvm/kvm_onhyperv.h b/arch/x86/kvm/kvm_onhyperv.h
index f9ca3e7432b2..eefab3dc8498 100644
--- a/arch/x86/kvm/kvm_onhyperv.h
+++ b/arch/x86/kvm/kvm_onhyperv.h
@@ -10,6 +10,26 @@
 int hv_flush_remote_tlbs_range(struct kvm *kvm, gfn_t gfn, gfn_t nr_pages);
 int hv_flush_remote_tlbs(struct kvm *kvm);
 void hv_track_root_tdp(struct kvm_vcpu *vcpu, hpa_t root_tdp);
+static inline hpa_t hv_get_partition_assist_page(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * Partition assist page is something which Hyper-V running in L0
+	 * requires from KVM running in L1 before direct TLB flush for L2
+	 * guests can be enabled. KVM doesn't currently use the page but to
+	 * comply with TLFS it still needs to be allocated. For now, this
+	 * is a single page shared among all vCPUs.
+	 */
+	struct hv_partition_assist_pg **p_hv_pa_pg =
+		&vcpu->kvm->arch.hv_pa_pg;
+
+	if (!*p_hv_pa_pg)
+		*p_hv_pa_pg = kzalloc(PAGE_SIZE, GFP_KERNEL_ACCOUNT);
+
+	if (!*p_hv_pa_pg)
+		return INVALID_PAGE;
+
+	return __pa(*p_hv_pa_pg);
+}
 #else /* !CONFIG_HYPERV */
 static inline int hv_flush_remote_tlbs(struct kvm *kvm)
 {
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 245b20973cae..3242f3da2457 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1475,8 +1475,7 @@ static int apic_set_eoi(struct kvm_lapic *apic)
 	apic_clear_isr(vector, apic);
 	apic_update_ppr(apic);
 
-	if (to_hv_vcpu(apic->vcpu) &&
-	    test_bit(vector, to_hv_synic(apic->vcpu)->vec_bitmap))
+	if (kvm_hv_synic_has_vector(apic->vcpu, vector))
 		kvm_hv_synic_send_eoi(apic->vcpu, vector);
 
 	kvm_ioapic_send_eoi(apic, vector);
@@ -2905,7 +2904,7 @@ int kvm_get_apic_interrupt(struct kvm_vcpu *vcpu)
 	 */
 
 	apic_clear_irr(vector, apic);
-	if (to_hv_vcpu(vcpu) && test_bit(vector, to_hv_synic(vcpu)->auto_eoi_bitmap)) {
+	if (kvm_hv_synic_auto_eoi_set(vcpu, vector)) {
 		/*
 		 * For auto-EOI interrupts, there might be another pending
 		 * interrupt above PPR, so check whether to raise another
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index bb8c86eefac0..60f21bb4c27b 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -146,6 +146,14 @@ static inline unsigned long kvm_get_active_pcid(struct kvm_vcpu *vcpu)
 	return kvm_get_pcid(vcpu, kvm_read_cr3(vcpu));
 }
 
+static inline unsigned long kvm_get_active_cr3_lam_bits(struct kvm_vcpu *vcpu)
+{
+	if (!guest_can_use(vcpu, X86_FEATURE_LAM))
+		return 0;
+
+	return kvm_read_cr3(vcpu) & (X86_CR3_LAM_U48 | X86_CR3_LAM_U57);
+}
+
 static inline void kvm_mmu_load_pgd(struct kvm_vcpu *vcpu)
 {
 	u64 root_hpa = vcpu->arch.mmu->root.hpa;
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index c57e181bba21..0544700ca50b 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -271,15 +271,11 @@ static inline unsigned long kvm_mmu_get_guest_pgd(struct kvm_vcpu *vcpu,
 
 static inline bool kvm_available_flush_remote_tlbs_range(void)
 {
+#if IS_ENABLED(CONFIG_HYPERV)
 	return kvm_x86_ops.flush_remote_tlbs_range;
-}
-
-int kvm_arch_flush_remote_tlbs_range(struct kvm *kvm, gfn_t gfn, u64 nr_pages)
-{
-	if (!kvm_x86_ops.flush_remote_tlbs_range)
-		return -EOPNOTSUPP;
-
-	return static_call(kvm_x86_flush_remote_tlbs_range)(kvm, gfn, nr_pages);
+#else
+	return false;
+#endif
 }
 
 static gfn_t kvm_mmu_page_get_gfn(struct kvm_mmu_page *sp, int index);
@@ -795,16 +791,26 @@ static struct kvm_lpage_info *lpage_info_slot(gfn_t gfn,
 	return &slot->arch.lpage_info[level - 2][idx];
 }
 
+/*
+ * The most significant bit in disallow_lpage tracks whether or not memory
+ * attributes are mixed, i.e. not identical for all gfns at the current level.
+ * The lower order bits are used to refcount other cases where a hugepage is
+ * disallowed, e.g. if KVM has shadow a page table at the gfn.
+ */
+#define KVM_LPAGE_MIXED_FLAG	BIT(31)
+
 static void update_gfn_disallow_lpage_count(const struct kvm_memory_slot *slot,
 					    gfn_t gfn, int count)
 {
 	struct kvm_lpage_info *linfo;
-	int i;
+	int old, i;
 
 	for (i = PG_LEVEL_2M; i <= KVM_MAX_HUGEPAGE_LEVEL; ++i) {
 		linfo = lpage_info_slot(gfn, slot, i);
+
+		old = linfo->disallow_lpage;
 		linfo->disallow_lpage += count;
-		WARN_ON_ONCE(linfo->disallow_lpage < 0);
+		WARN_ON_ONCE((old ^ linfo->disallow_lpage) & KVM_LPAGE_MIXED_FLAG);
 	}
 }
 
@@ -987,7 +993,7 @@ static void pte_list_desc_remove_entry(struct kvm *kvm,
 
 	/*
 	 * The head descriptor is empty.  If there are no tail descriptors,
-	 * nullify the rmap head to mark the list as emtpy, else point the rmap
+	 * nullify the rmap head to mark the list as empty, else point the rmap
 	 * head at the next descriptor, i.e. the new head.
 	 */
 	if (!head_desc->more)
@@ -1382,7 +1388,7 @@ void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm,
 		gfn_t end = slot->base_gfn + gfn_offset + __fls(mask);
 
 		if (READ_ONCE(eager_page_split))
-			kvm_mmu_try_split_huge_pages(kvm, slot, start, end, PG_LEVEL_4K);
+			kvm_mmu_try_split_huge_pages(kvm, slot, start, end + 1, PG_LEVEL_4K);
 
 		kvm_mmu_slot_gfn_write_protect(kvm, slot, start, PG_LEVEL_2M);
 
@@ -2840,9 +2846,9 @@ int mmu_try_to_unsync_pages(struct kvm *kvm, const struct kvm_memory_slot *slot,
 			/*
 			 * Recheck after taking the spinlock, a different vCPU
 			 * may have since marked the page unsync.  A false
-			 * positive on the unprotected check above is not
+			 * negative on the unprotected check above is not
 			 * possible as clearing sp->unsync _must_ hold mmu_lock
-			 * for write, i.e. unsync cannot transition from 0->1
+			 * for write, i.e. unsync cannot transition from 1->0
 			 * while this CPU holds mmu_lock for read (or write).
 			 */
 			if (READ_ONCE(sp->unsync))
@@ -3056,7 +3062,7 @@ static void direct_pte_prefetch(struct kvm_vcpu *vcpu, u64 *sptep)
  *
  * There are several ways to safely use this helper:
  *
- * - Check mmu_invalidate_retry_hva() after grabbing the mapping level, before
+ * - Check mmu_invalidate_retry_gfn() after grabbing the mapping level, before
  *   consuming it.  In this case, mmu_lock doesn't need to be held during the
  *   lookup, but it does need to be held while checking the MMU notifier.
  *
@@ -3137,9 +3143,9 @@ out:
 	return level;
 }
 
-int kvm_mmu_max_mapping_level(struct kvm *kvm,
-			      const struct kvm_memory_slot *slot, gfn_t gfn,
-			      int max_level)
+static int __kvm_mmu_max_mapping_level(struct kvm *kvm,
+				       const struct kvm_memory_slot *slot,
+				       gfn_t gfn, int max_level, bool is_private)
 {
 	struct kvm_lpage_info *linfo;
 	int host_level;
@@ -3151,6 +3157,9 @@ int kvm_mmu_max_mapping_level(struct kvm *kvm,
 			break;
 	}
 
+	if (is_private)
+		return max_level;
+
 	if (max_level == PG_LEVEL_4K)
 		return PG_LEVEL_4K;
 
@@ -3158,6 +3167,16 @@ int kvm_mmu_max_mapping_level(struct kvm *kvm,
 	return min(host_level, max_level);
 }
 
+int kvm_mmu_max_mapping_level(struct kvm *kvm,
+			      const struct kvm_memory_slot *slot, gfn_t gfn,
+			      int max_level)
+{
+	bool is_private = kvm_slot_can_be_private(slot) &&
+			  kvm_mem_is_private(kvm, gfn);
+
+	return __kvm_mmu_max_mapping_level(kvm, slot, gfn, max_level, is_private);
+}
+
 void kvm_mmu_hugepage_adjust(struct kvm_vcpu *vcpu, struct kvm_page_fault *fault)
 {
 	struct kvm_memory_slot *slot = fault->slot;
@@ -3178,8 +3197,9 @@ void kvm_mmu_hugepage_adjust(struct kvm_vcpu *vcpu, struct kvm_page_fault *fault
 	 * Enforce the iTLB multihit workaround after capturing the requested
 	 * level, which will be used to do precise, accurate accounting.
 	 */
-	fault->req_level = kvm_mmu_max_mapping_level(vcpu->kvm, slot,
-						     fault->gfn, fault->max_level);
+	fault->req_level = __kvm_mmu_max_mapping_level(vcpu->kvm, slot,
+						       fault->gfn, fault->max_level,
+						       fault->is_private);
 	if (fault->req_level == PG_LEVEL_4K || fault->huge_page_disallowed)
 		return;
 
@@ -3556,7 +3576,7 @@ static void mmu_free_root_page(struct kvm *kvm, hpa_t *root_hpa,
 		return;
 
 	if (is_tdp_mmu_page(sp))
-		kvm_tdp_mmu_put_root(kvm, sp, false);
+		kvm_tdp_mmu_put_root(kvm, sp);
 	else if (!--sp->root_count && sp->role.invalid)
 		kvm_mmu_prepare_zap_page(kvm, sp, invalid_list);
 
@@ -3739,7 +3759,7 @@ static int mmu_first_shadow_root_alloc(struct kvm *kvm)
 	    kvm_page_track_write_tracking_enabled(kvm))
 		goto out_success;
 
-	for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) {
+	for (i = 0; i < kvm_arch_nr_memslot_as_ids(kvm); i++) {
 		slots = __kvm_memslots(kvm, i);
 		kvm_for_each_memslot(slot, bkt, slots) {
 			/*
@@ -3782,7 +3802,7 @@ static int mmu_alloc_shadow_roots(struct kvm_vcpu *vcpu)
 	hpa_t root;
 
 	root_pgd = kvm_mmu_get_guest_pgd(vcpu, mmu);
-	root_gfn = root_pgd >> PAGE_SHIFT;
+	root_gfn = (root_pgd & __PT_BASE_ADDR_MASK) >> PAGE_SHIFT;
 
 	if (!kvm_vcpu_is_visible_gfn(vcpu, root_gfn)) {
 		mmu->root.hpa = kvm_mmu_get_dummy_root();
@@ -4259,6 +4279,55 @@ void kvm_arch_async_page_ready(struct kvm_vcpu *vcpu, struct kvm_async_pf *work)
 	kvm_mmu_do_page_fault(vcpu, work->cr2_or_gpa, 0, true, NULL);
 }
 
+static inline u8 kvm_max_level_for_order(int order)
+{
+	BUILD_BUG_ON(KVM_MAX_HUGEPAGE_LEVEL > PG_LEVEL_1G);
+
+	KVM_MMU_WARN_ON(order != KVM_HPAGE_GFN_SHIFT(PG_LEVEL_1G) &&
+			order != KVM_HPAGE_GFN_SHIFT(PG_LEVEL_2M) &&
+			order != KVM_HPAGE_GFN_SHIFT(PG_LEVEL_4K));
+
+	if (order >= KVM_HPAGE_GFN_SHIFT(PG_LEVEL_1G))
+		return PG_LEVEL_1G;
+
+	if (order >= KVM_HPAGE_GFN_SHIFT(PG_LEVEL_2M))
+		return PG_LEVEL_2M;
+
+	return PG_LEVEL_4K;
+}
+
+static void kvm_mmu_prepare_memory_fault_exit(struct kvm_vcpu *vcpu,
+					      struct kvm_page_fault *fault)
+{
+	kvm_prepare_memory_fault_exit(vcpu, fault->gfn << PAGE_SHIFT,
+				      PAGE_SIZE, fault->write, fault->exec,
+				      fault->is_private);
+}
+
+static int kvm_faultin_pfn_private(struct kvm_vcpu *vcpu,
+				   struct kvm_page_fault *fault)
+{
+	int max_order, r;
+
+	if (!kvm_slot_can_be_private(fault->slot)) {
+		kvm_mmu_prepare_memory_fault_exit(vcpu, fault);
+		return -EFAULT;
+	}
+
+	r = kvm_gmem_get_pfn(vcpu->kvm, fault->slot, fault->gfn, &fault->pfn,
+			     &max_order);
+	if (r) {
+		kvm_mmu_prepare_memory_fault_exit(vcpu, fault);
+		return r;
+	}
+
+	fault->max_level = min(kvm_max_level_for_order(max_order),
+			       fault->max_level);
+	fault->map_writable = !(fault->slot->flags & KVM_MEM_READONLY);
+
+	return RET_PF_CONTINUE;
+}
+
 static int __kvm_faultin_pfn(struct kvm_vcpu *vcpu, struct kvm_page_fault *fault)
 {
 	struct kvm_memory_slot *slot = fault->slot;
@@ -4291,6 +4360,14 @@ static int __kvm_faultin_pfn(struct kvm_vcpu *vcpu, struct kvm_page_fault *fault
 			return RET_PF_EMULATE;
 	}
 
+	if (fault->is_private != kvm_mem_is_private(vcpu->kvm, fault->gfn)) {
+		kvm_mmu_prepare_memory_fault_exit(vcpu, fault);
+		return -EFAULT;
+	}
+
+	if (fault->is_private)
+		return kvm_faultin_pfn_private(vcpu, fault);
+
 	async = false;
 	fault->pfn = __gfn_to_pfn_memslot(slot, fault->gfn, false, false, &async,
 					  fault->write, &fault->map_writable,
@@ -4328,6 +4405,31 @@ static int kvm_faultin_pfn(struct kvm_vcpu *vcpu, struct kvm_page_fault *fault,
 	fault->mmu_seq = vcpu->kvm->mmu_invalidate_seq;
 	smp_rmb();
 
+	/*
+	 * Check for a relevant mmu_notifier invalidation event before getting
+	 * the pfn from the primary MMU, and before acquiring mmu_lock.
+	 *
+	 * For mmu_lock, if there is an in-progress invalidation and the kernel
+	 * allows preemption, the invalidation task may drop mmu_lock and yield
+	 * in response to mmu_lock being contended, which is *very* counter-
+	 * productive as this vCPU can't actually make forward progress until
+	 * the invalidation completes.
+	 *
+	 * Retrying now can also avoid unnessary lock contention in the primary
+	 * MMU, as the primary MMU doesn't necessarily hold a single lock for
+	 * the duration of the invalidation, i.e. faulting in a conflicting pfn
+	 * can cause the invalidation to take longer by holding locks that are
+	 * needed to complete the invalidation.
+	 *
+	 * Do the pre-check even for non-preemtible kernels, i.e. even if KVM
+	 * will never yield mmu_lock in response to contention, as this vCPU is
+	 * *guaranteed* to need to retry, i.e. waiting until mmu_lock is held
+	 * to detect retry guarantees the worst case latency for the vCPU.
+	 */
+	if (fault->slot &&
+	    mmu_invalidate_retry_gfn_unsafe(vcpu->kvm, fault->mmu_seq, fault->gfn))
+		return RET_PF_RETRY;
+
 	ret = __kvm_faultin_pfn(vcpu, fault);
 	if (ret != RET_PF_CONTINUE)
 		return ret;
@@ -4338,6 +4440,18 @@ static int kvm_faultin_pfn(struct kvm_vcpu *vcpu, struct kvm_page_fault *fault,
 	if (unlikely(!fault->slot))
 		return kvm_handle_noslot_fault(vcpu, fault, access);
 
+	/*
+	 * Check again for a relevant mmu_notifier invalidation event purely to
+	 * avoid contending mmu_lock.  Most invalidations will be detected by
+	 * the previous check, but checking is extremely cheap relative to the
+	 * overall cost of failing to detect the invalidation until after
+	 * mmu_lock is acquired.
+	 */
+	if (mmu_invalidate_retry_gfn_unsafe(vcpu->kvm, fault->mmu_seq, fault->gfn)) {
+		kvm_release_pfn_clean(fault->pfn);
+		return RET_PF_RETRY;
+	}
+
 	return RET_PF_CONTINUE;
 }
 
@@ -4365,8 +4479,13 @@ static bool is_page_fault_stale(struct kvm_vcpu *vcpu,
 	if (!sp && kvm_test_request(KVM_REQ_MMU_FREE_OBSOLETE_ROOTS, vcpu))
 		return true;
 
+	/*
+	 * Check for a relevant mmu_notifier invalidation event one last time
+	 * now that mmu_lock is held, as the "unsafe" checks performed without
+	 * holding mmu_lock can get false negatives.
+	 */
 	return fault->slot &&
-	       mmu_invalidate_retry_hva(vcpu->kvm, fault->mmu_seq, fault->hva);
+	       mmu_invalidate_retry_gfn(vcpu->kvm, fault->mmu_seq, fault->gfn);
 }
 
 static int direct_page_fault(struct kvm_vcpu *vcpu, struct kvm_page_fault *fault)
@@ -6228,7 +6347,7 @@ static bool kvm_rmap_zap_gfn_range(struct kvm *kvm, gfn_t gfn_start, gfn_t gfn_e
 	if (!kvm_memslots_have_rmaps(kvm))
 		return flush;
 
-	for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) {
+	for (i = 0; i < kvm_arch_nr_memslot_as_ids(kvm); i++) {
 		slots = __kvm_memslots(kvm, i);
 
 		kvm_for_each_memslot_in_gfn_range(&iter, slots, gfn_start, gfn_end) {
@@ -6260,7 +6379,9 @@ void kvm_zap_gfn_range(struct kvm *kvm, gfn_t gfn_start, gfn_t gfn_end)
 
 	write_lock(&kvm->mmu_lock);
 
-	kvm_mmu_invalidate_begin(kvm, 0, -1ul);
+	kvm_mmu_invalidate_begin(kvm);
+
+	kvm_mmu_invalidate_range_add(kvm, gfn_start, gfn_end);
 
 	flush = kvm_rmap_zap_gfn_range(kvm, gfn_start, gfn_end);
 
@@ -6270,7 +6391,7 @@ void kvm_zap_gfn_range(struct kvm *kvm, gfn_t gfn_start, gfn_t gfn_end)
 	if (flush)
 		kvm_flush_remote_tlbs_range(kvm, gfn_start, gfn_end - gfn_start);
 
-	kvm_mmu_invalidate_end(kvm, 0, -1ul);
+	kvm_mmu_invalidate_end(kvm);
 
 	write_unlock(&kvm->mmu_lock);
 }
@@ -6544,7 +6665,7 @@ void kvm_mmu_try_split_huge_pages(struct kvm *kvm,
 	kvm_tdp_mmu_try_split_huge_pages(kvm, memslot, start, end, target_level, false);
 
 	/*
-	 * A TLB flush is unnecessary at this point for the same resons as in
+	 * A TLB flush is unnecessary at this point for the same reasons as in
 	 * kvm_mmu_slot_try_split_huge_pages().
 	 */
 }
@@ -6723,7 +6844,7 @@ void kvm_mmu_invalidate_mmio_sptes(struct kvm *kvm, u64 gen)
 	 * modifier prior to checking for a wrap of the MMIO generation so
 	 * that a wrap in any address space is detected.
 	 */
-	gen &= ~((u64)KVM_ADDRESS_SPACE_NUM - 1);
+	gen &= ~((u64)kvm_arch_nr_memslot_as_ids(kvm) - 1);
 
 	/*
 	 * The very rare case: if the MMIO generation number has wrapped,
@@ -7176,3 +7297,163 @@ void kvm_mmu_pre_destroy_vm(struct kvm *kvm)
 	if (kvm->arch.nx_huge_page_recovery_thread)
 		kthread_stop(kvm->arch.nx_huge_page_recovery_thread);
 }
+
+#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES
+bool kvm_arch_pre_set_memory_attributes(struct kvm *kvm,
+					struct kvm_gfn_range *range)
+{
+	/*
+	 * Zap SPTEs even if the slot can't be mapped PRIVATE.  KVM x86 only
+	 * supports KVM_MEMORY_ATTRIBUTE_PRIVATE, and so it *seems* like KVM
+	 * can simply ignore such slots.  But if userspace is making memory
+	 * PRIVATE, then KVM must prevent the guest from accessing the memory
+	 * as shared.  And if userspace is making memory SHARED and this point
+	 * is reached, then at least one page within the range was previously
+	 * PRIVATE, i.e. the slot's possible hugepage ranges are changing.
+	 * Zapping SPTEs in this case ensures KVM will reassess whether or not
+	 * a hugepage can be used for affected ranges.
+	 */
+	if (WARN_ON_ONCE(!kvm_arch_has_private_mem(kvm)))
+		return false;
+
+	return kvm_unmap_gfn_range(kvm, range);
+}
+
+static bool hugepage_test_mixed(struct kvm_memory_slot *slot, gfn_t gfn,
+				int level)
+{
+	return lpage_info_slot(gfn, slot, level)->disallow_lpage & KVM_LPAGE_MIXED_FLAG;
+}
+
+static void hugepage_clear_mixed(struct kvm_memory_slot *slot, gfn_t gfn,
+				 int level)
+{
+	lpage_info_slot(gfn, slot, level)->disallow_lpage &= ~KVM_LPAGE_MIXED_FLAG;
+}
+
+static void hugepage_set_mixed(struct kvm_memory_slot *slot, gfn_t gfn,
+			       int level)
+{
+	lpage_info_slot(gfn, slot, level)->disallow_lpage |= KVM_LPAGE_MIXED_FLAG;
+}
+
+static bool hugepage_has_attrs(struct kvm *kvm, struct kvm_memory_slot *slot,
+			       gfn_t gfn, int level, unsigned long attrs)
+{
+	const unsigned long start = gfn;
+	const unsigned long end = start + KVM_PAGES_PER_HPAGE(level);
+
+	if (level == PG_LEVEL_2M)
+		return kvm_range_has_memory_attributes(kvm, start, end, attrs);
+
+	for (gfn = start; gfn < end; gfn += KVM_PAGES_PER_HPAGE(level - 1)) {
+		if (hugepage_test_mixed(slot, gfn, level - 1) ||
+		    attrs != kvm_get_memory_attributes(kvm, gfn))
+			return false;
+	}
+	return true;
+}
+
+bool kvm_arch_post_set_memory_attributes(struct kvm *kvm,
+					 struct kvm_gfn_range *range)
+{
+	unsigned long attrs = range->arg.attributes;
+	struct kvm_memory_slot *slot = range->slot;
+	int level;
+
+	lockdep_assert_held_write(&kvm->mmu_lock);
+	lockdep_assert_held(&kvm->slots_lock);
+
+	/*
+	 * Calculate which ranges can be mapped with hugepages even if the slot
+	 * can't map memory PRIVATE.  KVM mustn't create a SHARED hugepage over
+	 * a range that has PRIVATE GFNs, and conversely converting a range to
+	 * SHARED may now allow hugepages.
+	 */
+	if (WARN_ON_ONCE(!kvm_arch_has_private_mem(kvm)))
+		return false;
+
+	/*
+	 * The sequence matters here: upper levels consume the result of lower
+	 * level's scanning.
+	 */
+	for (level = PG_LEVEL_2M; level <= KVM_MAX_HUGEPAGE_LEVEL; level++) {
+		gfn_t nr_pages = KVM_PAGES_PER_HPAGE(level);
+		gfn_t gfn = gfn_round_for_level(range->start, level);
+
+		/* Process the head page if it straddles the range. */
+		if (gfn != range->start || gfn + nr_pages > range->end) {
+			/*
+			 * Skip mixed tracking if the aligned gfn isn't covered
+			 * by the memslot, KVM can't use a hugepage due to the
+			 * misaligned address regardless of memory attributes.
+			 */
+			if (gfn >= slot->base_gfn) {
+				if (hugepage_has_attrs(kvm, slot, gfn, level, attrs))
+					hugepage_clear_mixed(slot, gfn, level);
+				else
+					hugepage_set_mixed(slot, gfn, level);
+			}
+			gfn += nr_pages;
+		}
+
+		/*
+		 * Pages entirely covered by the range are guaranteed to have
+		 * only the attributes which were just set.
+		 */
+		for ( ; gfn + nr_pages <= range->end; gfn += nr_pages)
+			hugepage_clear_mixed(slot, gfn, level);
+
+		/*
+		 * Process the last tail page if it straddles the range and is
+		 * contained by the memslot.  Like the head page, KVM can't
+		 * create a hugepage if the slot size is misaligned.
+		 */
+		if (gfn < range->end &&
+		    (gfn + nr_pages) <= (slot->base_gfn + slot->npages)) {
+			if (hugepage_has_attrs(kvm, slot, gfn, level, attrs))
+				hugepage_clear_mixed(slot, gfn, level);
+			else
+				hugepage_set_mixed(slot, gfn, level);
+		}
+	}
+	return false;
+}
+
+void kvm_mmu_init_memslot_memory_attributes(struct kvm *kvm,
+					    struct kvm_memory_slot *slot)
+{
+	int level;
+
+	if (!kvm_arch_has_private_mem(kvm))
+		return;
+
+	for (level = PG_LEVEL_2M; level <= KVM_MAX_HUGEPAGE_LEVEL; level++) {
+		/*
+		 * Don't bother tracking mixed attributes for pages that can't
+		 * be huge due to alignment, i.e. process only pages that are
+		 * entirely contained by the memslot.
+		 */
+		gfn_t end = gfn_round_for_level(slot->base_gfn + slot->npages, level);
+		gfn_t start = gfn_round_for_level(slot->base_gfn, level);
+		gfn_t nr_pages = KVM_PAGES_PER_HPAGE(level);
+		gfn_t gfn;
+
+		if (start < slot->base_gfn)
+			start += nr_pages;
+
+		/*
+		 * Unlike setting attributes, every potential hugepage needs to
+		 * be manually checked as the attributes may already be mixed.
+		 */
+		for (gfn = start; gfn < end; gfn += nr_pages) {
+			unsigned long attrs = kvm_get_memory_attributes(kvm, gfn);
+
+			if (hugepage_has_attrs(kvm, slot, gfn, level, attrs))
+				hugepage_clear_mixed(slot, gfn, level);
+			else
+				hugepage_set_mixed(slot, gfn, level);
+		}
+	}
+}
+#endif
diff --git a/arch/x86/kvm/mmu/mmu_internal.h b/arch/x86/kvm/mmu/mmu_internal.h
index decc1f153669..0669a8a668ca 100644
--- a/arch/x86/kvm/mmu/mmu_internal.h
+++ b/arch/x86/kvm/mmu/mmu_internal.h
@@ -13,6 +13,7 @@
 #endif
 
 /* Page table builder macros common to shadow (host) PTEs and guest PTEs. */
+#define __PT_BASE_ADDR_MASK GENMASK_ULL(51, 12)
 #define __PT_LEVEL_SHIFT(level, bits_per_level)	\
 	(PAGE_SHIFT + ((level) - 1) * (bits_per_level))
 #define __PT_INDEX(address, level, bits_per_level) \
@@ -201,6 +202,7 @@ struct kvm_page_fault {
 
 	/* Derived from mmu and global state.  */
 	const bool is_tdp;
+	const bool is_private;
 	const bool nx_huge_page_workaround_enabled;
 
 	/*
@@ -296,6 +298,7 @@ static inline int kvm_mmu_do_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
 		.max_level = KVM_MAX_HUGEPAGE_LEVEL,
 		.req_level = PG_LEVEL_4K,
 		.goal_level = PG_LEVEL_4K,
+		.is_private = kvm_mem_is_private(vcpu->kvm, cr2_or_gpa >> PAGE_SHIFT),
 	};
 	int r;
 
diff --git a/arch/x86/kvm/mmu/paging_tmpl.h b/arch/x86/kvm/mmu/paging_tmpl.h
index c85255073f67..4d4e98fe4f35 100644
--- a/arch/x86/kvm/mmu/paging_tmpl.h
+++ b/arch/x86/kvm/mmu/paging_tmpl.h
@@ -62,7 +62,7 @@
 #endif
 
 /* Common logic, but per-type values.  These also need to be undefined. */
-#define PT_BASE_ADDR_MASK	((pt_element_t)(((1ULL << 52) - 1) & ~(u64)(PAGE_SIZE-1)))
+#define PT_BASE_ADDR_MASK	((pt_element_t)__PT_BASE_ADDR_MASK)
 #define PT_LVL_ADDR_MASK(lvl)	__PT_LVL_ADDR_MASK(PT_BASE_ADDR_MASK, lvl, PT_LEVEL_BITS)
 #define PT_LVL_OFFSET_MASK(lvl)	__PT_LVL_OFFSET_MASK(PT_BASE_ADDR_MASK, lvl, PT_LEVEL_BITS)
 #define PT_INDEX(addr, lvl)	__PT_INDEX(addr, lvl, PT_LEVEL_BITS)
diff --git a/arch/x86/kvm/mmu/tdp_iter.c b/arch/x86/kvm/mmu/tdp_iter.c
index bd30ebfb2f2c..04c247bfe318 100644
--- a/arch/x86/kvm/mmu/tdp_iter.c
+++ b/arch/x86/kvm/mmu/tdp_iter.c
@@ -146,7 +146,7 @@ static bool try_step_up(struct tdp_iter *iter)
  * Step to the next SPTE in a pre-order traversal of the paging structure.
  * To get to the next SPTE, the iterator either steps down towards the goal
  * GFN, if at a present, non-last-level SPTE, or over to a SPTE mapping a
- * highter GFN.
+ * higher GFN.
  *
  * The basic algorithm is as follows:
  * 1. If the current SPTE is a non-last-level SPTE, step down into the page
diff --git a/arch/x86/kvm/mmu/tdp_mmu.c b/arch/x86/kvm/mmu/tdp_mmu.c
index 6cd4dd631a2f..6ae19b4ee5b1 100644
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -73,11 +73,8 @@ static void tdp_mmu_free_sp_rcu_callback(struct rcu_head *head)
 	tdp_mmu_free_sp(sp);
 }
 
-void kvm_tdp_mmu_put_root(struct kvm *kvm, struct kvm_mmu_page *root,
-			  bool shared)
+void kvm_tdp_mmu_put_root(struct kvm *kvm, struct kvm_mmu_page *root)
 {
-	kvm_lockdep_assert_mmu_lock_held(kvm, shared);
-
 	if (!refcount_dec_and_test(&root->tdp_mmu_root_count))
 		return;
 
@@ -106,10 +103,16 @@ void kvm_tdp_mmu_put_root(struct kvm *kvm, struct kvm_mmu_page *root,
  */
 static struct kvm_mmu_page *tdp_mmu_next_root(struct kvm *kvm,
 					      struct kvm_mmu_page *prev_root,
-					      bool shared, bool only_valid)
+					      bool only_valid)
 {
 	struct kvm_mmu_page *next_root;
 
+	/*
+	 * While the roots themselves are RCU-protected, fields such as
+	 * role.invalid are protected by mmu_lock.
+	 */
+	lockdep_assert_held(&kvm->mmu_lock);
+
 	rcu_read_lock();
 
 	if (prev_root)
@@ -132,7 +135,7 @@ static struct kvm_mmu_page *tdp_mmu_next_root(struct kvm *kvm,
 	rcu_read_unlock();
 
 	if (prev_root)
-		kvm_tdp_mmu_put_root(kvm, prev_root, shared);
+		kvm_tdp_mmu_put_root(kvm, prev_root);
 
 	return next_root;
 }
@@ -144,26 +147,22 @@ static struct kvm_mmu_page *tdp_mmu_next_root(struct kvm *kvm,
  * recent root. (Unless keeping a live reference is desirable.)
  *
  * If shared is set, this function is operating under the MMU lock in read
- * mode. In the unlikely event that this thread must free a root, the lock
- * will be temporarily dropped and reacquired in write mode.
+ * mode.
  */
-#define __for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared, _only_valid)\
-	for (_root = tdp_mmu_next_root(_kvm, NULL, _shared, _only_valid);	\
-	     _root;								\
-	     _root = tdp_mmu_next_root(_kvm, _root, _shared, _only_valid))	\
-		if (kvm_lockdep_assert_mmu_lock_held(_kvm, _shared) &&		\
-		    kvm_mmu_page_as_id(_root) != _as_id) {			\
+#define __for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _only_valid)\
+	for (_root = tdp_mmu_next_root(_kvm, NULL, _only_valid);	\
+	     ({ lockdep_assert_held(&(_kvm)->mmu_lock); }), _root;	\
+	     _root = tdp_mmu_next_root(_kvm, _root, _only_valid))	\
+		if (kvm_mmu_page_as_id(_root) != _as_id) {		\
 		} else
 
-#define for_each_valid_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared)	\
-	__for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared, true)
+#define for_each_valid_tdp_mmu_root_yield_safe(_kvm, _root, _as_id)	\
+	__for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, true)
 
-#define for_each_tdp_mmu_root_yield_safe(_kvm, _root, _shared)			\
-	for (_root = tdp_mmu_next_root(_kvm, NULL, _shared, false);		\
-	     _root;								\
-	     _root = tdp_mmu_next_root(_kvm, _root, _shared, false))		\
-		if (!kvm_lockdep_assert_mmu_lock_held(_kvm, _shared)) {		\
-		} else
+#define for_each_tdp_mmu_root_yield_safe(_kvm, _root)			\
+	for (_root = tdp_mmu_next_root(_kvm, NULL, false);		\
+	     ({ lockdep_assert_held(&(_kvm)->mmu_lock); }), _root;	\
+	     _root = tdp_mmu_next_root(_kvm, _root, false))
 
 /*
  * Iterate over all TDP MMU roots.  Requires that mmu_lock be held for write,
@@ -276,28 +275,18 @@ static void tdp_unaccount_mmu_page(struct kvm *kvm, struct kvm_mmu_page *sp)
  *
  * @kvm: kvm instance
  * @sp: the page to be removed
- * @shared: This operation may not be running under the exclusive use of
- *	    the MMU lock and the operation must synchronize with other
- *	    threads that might be adding or removing pages.
  */
-static void tdp_mmu_unlink_sp(struct kvm *kvm, struct kvm_mmu_page *sp,
-			      bool shared)
+static void tdp_mmu_unlink_sp(struct kvm *kvm, struct kvm_mmu_page *sp)
 {
 	tdp_unaccount_mmu_page(kvm, sp);
 
 	if (!sp->nx_huge_page_disallowed)
 		return;
 
-	if (shared)
-		spin_lock(&kvm->arch.tdp_mmu_pages_lock);
-	else
-		lockdep_assert_held_write(&kvm->mmu_lock);
-
+	spin_lock(&kvm->arch.tdp_mmu_pages_lock);
 	sp->nx_huge_page_disallowed = false;
 	untrack_possible_nx_huge_page(kvm, sp);
-
-	if (shared)
-		spin_unlock(&kvm->arch.tdp_mmu_pages_lock);
+	spin_unlock(&kvm->arch.tdp_mmu_pages_lock);
 }
 
 /**
@@ -326,7 +315,7 @@ static void handle_removed_pt(struct kvm *kvm, tdp_ptep_t pt, bool shared)
 
 	trace_kvm_mmu_prepare_zap_page(sp);
 
-	tdp_mmu_unlink_sp(kvm, sp, shared);
+	tdp_mmu_unlink_sp(kvm, sp);
 
 	for (i = 0; i < SPTE_ENT_PER_PAGE; i++) {
 		tdp_ptep_t sptep = pt + i;
@@ -832,7 +821,8 @@ bool kvm_tdp_mmu_zap_leafs(struct kvm *kvm, gfn_t start, gfn_t end, bool flush)
 {
 	struct kvm_mmu_page *root;
 
-	for_each_tdp_mmu_root_yield_safe(kvm, root, false)
+	lockdep_assert_held_write(&kvm->mmu_lock);
+	for_each_tdp_mmu_root_yield_safe(kvm, root)
 		flush = tdp_mmu_zap_leafs(kvm, root, start, end, true, flush);
 
 	return flush;
@@ -854,7 +844,8 @@ void kvm_tdp_mmu_zap_all(struct kvm *kvm)
 	 * is being destroyed or the userspace VMM has exited.  In both cases,
 	 * KVM_RUN is unreachable, i.e. no vCPUs will ever service the request.
 	 */
-	for_each_tdp_mmu_root_yield_safe(kvm, root, false)
+	lockdep_assert_held_write(&kvm->mmu_lock);
+	for_each_tdp_mmu_root_yield_safe(kvm, root)
 		tdp_mmu_zap_root(kvm, root, false);
 }
 
@@ -868,7 +859,7 @@ void kvm_tdp_mmu_zap_invalidated_roots(struct kvm *kvm)
 
 	read_lock(&kvm->mmu_lock);
 
-	for_each_tdp_mmu_root_yield_safe(kvm, root, true) {
+	for_each_tdp_mmu_root_yield_safe(kvm, root) {
 		if (!root->tdp_mmu_scheduled_root_to_zap)
 			continue;
 
@@ -891,7 +882,7 @@ void kvm_tdp_mmu_zap_invalidated_roots(struct kvm *kvm)
 		 * the root must be reachable by mmu_notifiers while it's being
 		 * zapped
 		 */
-		kvm_tdp_mmu_put_root(kvm, root, true);
+		kvm_tdp_mmu_put_root(kvm, root);
 	}
 
 	read_unlock(&kvm->mmu_lock);
@@ -1125,7 +1116,7 @@ bool kvm_tdp_mmu_unmap_gfn_range(struct kvm *kvm, struct kvm_gfn_range *range,
 {
 	struct kvm_mmu_page *root;
 
-	__for_each_tdp_mmu_root_yield_safe(kvm, root, range->slot->as_id, false, false)
+	__for_each_tdp_mmu_root_yield_safe(kvm, root, range->slot->as_id, false)
 		flush = tdp_mmu_zap_leafs(kvm, root, range->start, range->end,
 					  range->may_block, flush);
 
@@ -1314,7 +1305,7 @@ bool kvm_tdp_mmu_wrprot_slot(struct kvm *kvm,
 
 	lockdep_assert_held_read(&kvm->mmu_lock);
 
-	for_each_valid_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
+	for_each_valid_tdp_mmu_root_yield_safe(kvm, root, slot->as_id)
 		spte_set |= wrprot_gfn_range(kvm, root, slot->base_gfn,
 			     slot->base_gfn + slot->npages, min_level);
 
@@ -1346,6 +1337,8 @@ static struct kvm_mmu_page *tdp_mmu_alloc_sp_for_split(struct kvm *kvm,
 {
 	struct kvm_mmu_page *sp;
 
+	kvm_lockdep_assert_mmu_lock_held(kvm, shared);
+
 	/*
 	 * Since we are allocating while under the MMU lock we have to be
 	 * careful about GFP flags. Use GFP_NOWAIT to avoid blocking on direct
@@ -1496,11 +1489,10 @@ void kvm_tdp_mmu_try_split_huge_pages(struct kvm *kvm,
 	int r = 0;
 
 	kvm_lockdep_assert_mmu_lock_held(kvm, shared);
-
-	for_each_valid_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, shared) {
+	for_each_valid_tdp_mmu_root_yield_safe(kvm, root, slot->as_id) {
 		r = tdp_mmu_split_huge_pages_root(kvm, root, start, end, target_level, shared);
 		if (r) {
-			kvm_tdp_mmu_put_root(kvm, root, shared);
+			kvm_tdp_mmu_put_root(kvm, root);
 			break;
 		}
 	}
@@ -1522,12 +1514,13 @@ static bool clear_dirty_gfn_range(struct kvm *kvm, struct kvm_mmu_page *root,
 
 	rcu_read_lock();
 
-	tdp_root_for_each_leaf_pte(iter, root, start, end) {
+	tdp_root_for_each_pte(iter, root, start, end) {
 retry:
-		if (tdp_mmu_iter_cond_resched(kvm, &iter, false, true))
+		if (!is_shadow_present_pte(iter.old_spte) ||
+		    !is_last_spte(iter.old_spte, iter.level))
 			continue;
 
-		if (!is_shadow_present_pte(iter.old_spte))
+		if (tdp_mmu_iter_cond_resched(kvm, &iter, false, true))
 			continue;
 
 		KVM_MMU_WARN_ON(kvm_ad_enabled() &&
@@ -1560,8 +1553,7 @@ bool kvm_tdp_mmu_clear_dirty_slot(struct kvm *kvm,
 	bool spte_set = false;
 
 	lockdep_assert_held_read(&kvm->mmu_lock);
-
-	for_each_valid_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
+	for_each_valid_tdp_mmu_root_yield_safe(kvm, root, slot->as_id)
 		spte_set |= clear_dirty_gfn_range(kvm, root, slot->base_gfn,
 				slot->base_gfn + slot->npages);
 
@@ -1695,8 +1687,7 @@ void kvm_tdp_mmu_zap_collapsible_sptes(struct kvm *kvm,
 	struct kvm_mmu_page *root;
 
 	lockdep_assert_held_read(&kvm->mmu_lock);
-
-	for_each_valid_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
+	for_each_valid_tdp_mmu_root_yield_safe(kvm, root, slot->as_id)
 		zap_collapsible_spte_range(kvm, root, slot);
 }
 
diff --git a/arch/x86/kvm/mmu/tdp_mmu.h b/arch/x86/kvm/mmu/tdp_mmu.h
index 733a3aef3a96..20d97aa46c49 100644
--- a/arch/x86/kvm/mmu/tdp_mmu.h
+++ b/arch/x86/kvm/mmu/tdp_mmu.h
@@ -17,8 +17,7 @@ __must_check static inline bool kvm_tdp_mmu_get_root(struct kvm_mmu_page *root)
 	return refcount_inc_not_zero(&root->tdp_mmu_root_count);
 }
 
-void kvm_tdp_mmu_put_root(struct kvm *kvm, struct kvm_mmu_page *root,
-			  bool shared);
+void kvm_tdp_mmu_put_root(struct kvm *kvm, struct kvm_mmu_page *root);
 
 bool kvm_tdp_mmu_zap_leafs(struct kvm *kvm, gfn_t start, gfn_t end, bool flush);
 bool kvm_tdp_mmu_zap_sp(struct kvm *kvm, struct kvm_mmu_page *sp);
diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index 9ae07db6f0f6..87cc6c8809ad 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -127,9 +127,9 @@ static void kvm_perf_overflow(struct perf_event *perf_event,
 	struct kvm_pmc *pmc = perf_event->overflow_handler_context;
 
 	/*
-	 * Ignore overflow events for counters that are scheduled to be
-	 * reprogrammed, e.g. if a PMI for the previous event races with KVM's
-	 * handling of a related guest WRMSR.
+	 * Ignore asynchronous overflow events for counters that are scheduled
+	 * to be reprogrammed, e.g. if a PMI for the previous event races with
+	 * KVM's handling of a related guest WRMSR.
 	 */
 	if (test_and_set_bit(pmc->idx, pmc_to_pmu(pmc)->reprogram_pmi))
 		return;
@@ -161,6 +161,15 @@ static u64 pmc_get_pebs_precise_level(struct kvm_pmc *pmc)
 	return 1;
 }
 
+static u64 get_sample_period(struct kvm_pmc *pmc, u64 counter_value)
+{
+	u64 sample_period = (-counter_value) & pmc_bitmask(pmc);
+
+	if (!sample_period)
+		sample_period = pmc_bitmask(pmc) + 1;
+	return sample_period;
+}
+
 static int pmc_reprogram_counter(struct kvm_pmc *pmc, u32 type, u64 config,
 				 bool exclude_user, bool exclude_kernel,
 				 bool intr)
@@ -215,17 +224,30 @@ static int pmc_reprogram_counter(struct kvm_pmc *pmc, u32 type, u64 config,
 	return 0;
 }
 
-static void pmc_pause_counter(struct kvm_pmc *pmc)
+static bool pmc_pause_counter(struct kvm_pmc *pmc)
 {
 	u64 counter = pmc->counter;
-
-	if (!pmc->perf_event || pmc->is_paused)
-		return;
+	u64 prev_counter;
 
 	/* update counter, reset event value to avoid redundant accumulation */
-	counter += perf_event_pause(pmc->perf_event, true);
+	if (pmc->perf_event && !pmc->is_paused)
+		counter += perf_event_pause(pmc->perf_event, true);
+
+	/*
+	 * Snapshot the previous counter *after* accumulating state from perf.
+	 * If overflow already happened, hardware (via perf) is responsible for
+	 * generating a PMI.  KVM just needs to detect overflow on emulated
+	 * counter events that haven't yet been processed.
+	 */
+	prev_counter = counter & pmc_bitmask(pmc);
+
+	counter += pmc->emulated_counter;
 	pmc->counter = counter & pmc_bitmask(pmc);
+
+	pmc->emulated_counter = 0;
 	pmc->is_paused = true;
+
+	return pmc->counter < prev_counter;
 }
 
 static bool pmc_resume_counter(struct kvm_pmc *pmc)
@@ -250,6 +272,51 @@ static bool pmc_resume_counter(struct kvm_pmc *pmc)
 	return true;
 }
 
+static void pmc_release_perf_event(struct kvm_pmc *pmc)
+{
+	if (pmc->perf_event) {
+		perf_event_release_kernel(pmc->perf_event);
+		pmc->perf_event = NULL;
+		pmc->current_config = 0;
+		pmc_to_pmu(pmc)->event_count--;
+	}
+}
+
+static void pmc_stop_counter(struct kvm_pmc *pmc)
+{
+	if (pmc->perf_event) {
+		pmc->counter = pmc_read_counter(pmc);
+		pmc_release_perf_event(pmc);
+	}
+}
+
+static void pmc_update_sample_period(struct kvm_pmc *pmc)
+{
+	if (!pmc->perf_event || pmc->is_paused ||
+	    !is_sampling_event(pmc->perf_event))
+		return;
+
+	perf_event_period(pmc->perf_event,
+			  get_sample_period(pmc, pmc->counter));
+}
+
+void pmc_write_counter(struct kvm_pmc *pmc, u64 val)
+{
+	/*
+	 * Drop any unconsumed accumulated counts, the WRMSR is a write, not a
+	 * read-modify-write.  Adjust the counter value so that its value is
+	 * relative to the current count, as reading the current count from
+	 * perf is faster than pausing and repgrogramming the event in order to
+	 * reset it to '0'.  Note, this very sneakily offsets the accumulated
+	 * emulated count too, by using pmc_read_counter()!
+	 */
+	pmc->emulated_counter = 0;
+	pmc->counter += val - pmc_read_counter(pmc);
+	pmc->counter &= pmc_bitmask(pmc);
+	pmc_update_sample_period(pmc);
+}
+EXPORT_SYMBOL_GPL(pmc_write_counter);
+
 static int filter_cmp(const void *pa, const void *pb, u64 mask)
 {
 	u64 a = *(u64 *)pa & mask;
@@ -383,14 +450,15 @@ static void reprogram_counter(struct kvm_pmc *pmc)
 	struct kvm_pmu *pmu = pmc_to_pmu(pmc);
 	u64 eventsel = pmc->eventsel;
 	u64 new_config = eventsel;
+	bool emulate_overflow;
 	u8 fixed_ctr_ctrl;
 
-	pmc_pause_counter(pmc);
+	emulate_overflow = pmc_pause_counter(pmc);
 
 	if (!pmc_event_is_allowed(pmc))
 		goto reprogram_complete;
 
-	if (pmc->counter < pmc->prev_counter)
+	if (emulate_overflow)
 		__kvm_perf_overflow(pmc, false);
 
 	if (eventsel & ARCH_PERFMON_EVENTSEL_PIN_CONTROL)
@@ -430,7 +498,6 @@ static void reprogram_counter(struct kvm_pmc *pmc)
 
 reprogram_complete:
 	clear_bit(pmc->idx, (unsigned long *)&pmc_to_pmu(pmc)->reprogram_pmi);
-	pmc->prev_counter = 0;
 }
 
 void kvm_pmu_handle_event(struct kvm_vcpu *vcpu)
@@ -639,32 +706,60 @@ int kvm_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	return 0;
 }
 
-/* refresh PMU settings. This function generally is called when underlying
- * settings are changed (such as changes of PMU CPUID by guest VMs), which
- * should rarely happen.
+static void kvm_pmu_reset(struct kvm_vcpu *vcpu)
+{
+	struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
+	struct kvm_pmc *pmc;
+	int i;
+
+	pmu->need_cleanup = false;
+
+	bitmap_zero(pmu->reprogram_pmi, X86_PMC_IDX_MAX);
+
+	for_each_set_bit(i, pmu->all_valid_pmc_idx, X86_PMC_IDX_MAX) {
+		pmc = static_call(kvm_x86_pmu_pmc_idx_to_pmc)(pmu, i);
+		if (!pmc)
+			continue;
+
+		pmc_stop_counter(pmc);
+		pmc->counter = 0;
+		pmc->emulated_counter = 0;
+
+		if (pmc_is_gp(pmc))
+			pmc->eventsel = 0;
+	}
+
+	pmu->fixed_ctr_ctrl = pmu->global_ctrl = pmu->global_status = 0;
+
+	static_call_cond(kvm_x86_pmu_reset)(vcpu);
+}
+
+
+/*
+ * Refresh the PMU configuration for the vCPU, e.g. if userspace changes CPUID
+ * and/or PERF_CAPABILITIES.
  */
 void kvm_pmu_refresh(struct kvm_vcpu *vcpu)
 {
 	if (KVM_BUG_ON(kvm_vcpu_has_run(vcpu), vcpu->kvm))
 		return;
 
+	/*
+	 * Stop/release all existing counters/events before realizing the new
+	 * vPMU model.
+	 */
+	kvm_pmu_reset(vcpu);
+
 	bitmap_zero(vcpu_to_pmu(vcpu)->all_valid_pmc_idx, X86_PMC_IDX_MAX);
 	static_call(kvm_x86_pmu_refresh)(vcpu);
 }
 
-void kvm_pmu_reset(struct kvm_vcpu *vcpu)
-{
-	static_call(kvm_x86_pmu_reset)(vcpu);
-}
-
 void kvm_pmu_init(struct kvm_vcpu *vcpu)
 {
 	struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
 
 	memset(pmu, 0, sizeof(*pmu));
 	static_call(kvm_x86_pmu_init)(vcpu);
-	pmu->event_count = 0;
-	pmu->need_cleanup = false;
 	kvm_pmu_refresh(vcpu);
 }
 
@@ -700,8 +795,7 @@ void kvm_pmu_destroy(struct kvm_vcpu *vcpu)
 
 static void kvm_pmu_incr_counter(struct kvm_pmc *pmc)
 {
-	pmc->prev_counter = pmc->counter;
-	pmc->counter = (pmc->counter + 1) & pmc_bitmask(pmc);
+	pmc->emulated_counter++;
 	kvm_pmu_request_counter_reprogram(pmc);
 }
 
diff --git a/arch/x86/kvm/pmu.h b/arch/x86/kvm/pmu.h
index 1d64113de488..7caeb3d8d4fd 100644
--- a/arch/x86/kvm/pmu.h
+++ b/arch/x86/kvm/pmu.h
@@ -66,7 +66,8 @@ static inline u64 pmc_read_counter(struct kvm_pmc *pmc)
 {
 	u64 counter, enabled, running;
 
-	counter = pmc->counter;
+	counter = pmc->counter + pmc->emulated_counter;
+
 	if (pmc->perf_event && !pmc->is_paused)
 		counter += perf_event_read_value(pmc->perf_event,
 						 &enabled, &running);
@@ -74,29 +75,7 @@ static inline u64 pmc_read_counter(struct kvm_pmc *pmc)
 	return counter & pmc_bitmask(pmc);
 }
 
-static inline void pmc_write_counter(struct kvm_pmc *pmc, u64 val)
-{
-	pmc->counter += val - pmc_read_counter(pmc);
-	pmc->counter &= pmc_bitmask(pmc);
-}
-
-static inline void pmc_release_perf_event(struct kvm_pmc *pmc)
-{
-	if (pmc->perf_event) {
-		perf_event_release_kernel(pmc->perf_event);
-		pmc->perf_event = NULL;
-		pmc->current_config = 0;
-		pmc_to_pmu(pmc)->event_count--;
-	}
-}
-
-static inline void pmc_stop_counter(struct kvm_pmc *pmc)
-{
-	if (pmc->perf_event) {
-		pmc->counter = pmc_read_counter(pmc);
-		pmc_release_perf_event(pmc);
-	}
-}
+void pmc_write_counter(struct kvm_pmc *pmc, u64 val);
 
 static inline bool pmc_is_gp(struct kvm_pmc *pmc)
 {
@@ -146,25 +125,6 @@ static inline struct kvm_pmc *get_fixed_pmc(struct kvm_pmu *pmu, u32 msr)
 	return NULL;
 }
 
-static inline u64 get_sample_period(struct kvm_pmc *pmc, u64 counter_value)
-{
-	u64 sample_period = (-counter_value) & pmc_bitmask(pmc);
-
-	if (!sample_period)
-		sample_period = pmc_bitmask(pmc) + 1;
-	return sample_period;
-}
-
-static inline void pmc_update_sample_period(struct kvm_pmc *pmc)
-{
-	if (!pmc->perf_event || pmc->is_paused ||
-	    !is_sampling_event(pmc->perf_event))
-		return;
-
-	perf_event_period(pmc->perf_event,
-			  get_sample_period(pmc, pmc->counter));
-}
-
 static inline bool pmc_speculative_in_use(struct kvm_pmc *pmc)
 {
 	struct kvm_pmu *pmu = pmc_to_pmu(pmc);
@@ -261,7 +221,6 @@ bool kvm_pmu_is_valid_msr(struct kvm_vcpu *vcpu, u32 msr);
 int kvm_pmu_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info);
 int kvm_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info);
 void kvm_pmu_refresh(struct kvm_vcpu *vcpu);
-void kvm_pmu_reset(struct kvm_vcpu *vcpu);
 void kvm_pmu_init(struct kvm_vcpu *vcpu);
 void kvm_pmu_cleanup(struct kvm_vcpu *vcpu);
 void kvm_pmu_destroy(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/reverse_cpuid.h b/arch/x86/kvm/reverse_cpuid.h
index b81650678375..aadefcaa9561 100644
--- a/arch/x86/kvm/reverse_cpuid.h
+++ b/arch/x86/kvm/reverse_cpuid.h
@@ -16,6 +16,7 @@ enum kvm_only_cpuid_leafs {
 	CPUID_7_1_EDX,
 	CPUID_8000_0007_EDX,
 	CPUID_8000_0022_EAX,
+	CPUID_7_2_EDX,
 	NR_KVM_CPU_CAPS,
 
 	NKVMCAPINTS = NR_KVM_CPU_CAPS - NCAPINTS,
@@ -46,6 +47,14 @@ enum kvm_only_cpuid_leafs {
 #define X86_FEATURE_AMX_COMPLEX         KVM_X86_FEATURE(CPUID_7_1_EDX, 8)
 #define X86_FEATURE_PREFETCHITI         KVM_X86_FEATURE(CPUID_7_1_EDX, 14)
 
+/* Intel-defined sub-features, CPUID level 0x00000007:2 (EDX) */
+#define X86_FEATURE_INTEL_PSFD		KVM_X86_FEATURE(CPUID_7_2_EDX, 0)
+#define X86_FEATURE_IPRED_CTRL		KVM_X86_FEATURE(CPUID_7_2_EDX, 1)
+#define KVM_X86_FEATURE_RRSBA_CTRL	KVM_X86_FEATURE(CPUID_7_2_EDX, 2)
+#define X86_FEATURE_DDPD_U		KVM_X86_FEATURE(CPUID_7_2_EDX, 3)
+#define X86_FEATURE_BHI_CTRL		KVM_X86_FEATURE(CPUID_7_2_EDX, 4)
+#define X86_FEATURE_MCDT_NO		KVM_X86_FEATURE(CPUID_7_2_EDX, 5)
+
 /* CPUID level 0x80000007 (EDX). */
 #define KVM_X86_FEATURE_CONSTANT_TSC	KVM_X86_FEATURE(CPUID_8000_0007_EDX, 8)
 
@@ -80,6 +89,7 @@ static const struct cpuid_reg reverse_cpuid[] = {
 	[CPUID_8000_0007_EDX] = {0x80000007, 0, CPUID_EDX},
 	[CPUID_8000_0021_EAX] = {0x80000021, 0, CPUID_EAX},
 	[CPUID_8000_0022_EAX] = {0x80000022, 0, CPUID_EAX},
+	[CPUID_7_2_EDX]       = {         7, 2, CPUID_EDX},
 };
 
 /*
@@ -106,18 +116,19 @@ static __always_inline void reverse_cpuid_check(unsigned int x86_leaf)
  */
 static __always_inline u32 __feature_translate(int x86_feature)
 {
-	if (x86_feature == X86_FEATURE_SGX1)
-		return KVM_X86_FEATURE_SGX1;
-	else if (x86_feature == X86_FEATURE_SGX2)
-		return KVM_X86_FEATURE_SGX2;
-	else if (x86_feature == X86_FEATURE_SGX_EDECCSSA)
-		return KVM_X86_FEATURE_SGX_EDECCSSA;
-	else if (x86_feature == X86_FEATURE_CONSTANT_TSC)
-		return KVM_X86_FEATURE_CONSTANT_TSC;
-	else if (x86_feature == X86_FEATURE_PERFMON_V2)
-		return KVM_X86_FEATURE_PERFMON_V2;
-
-	return x86_feature;
+#define KVM_X86_TRANSLATE_FEATURE(f)	\
+	case X86_FEATURE_##f: return KVM_X86_FEATURE_##f
+
+	switch (x86_feature) {
+	KVM_X86_TRANSLATE_FEATURE(SGX1);
+	KVM_X86_TRANSLATE_FEATURE(SGX2);
+	KVM_X86_TRANSLATE_FEATURE(SGX_EDECCSSA);
+	KVM_X86_TRANSLATE_FEATURE(CONSTANT_TSC);
+	KVM_X86_TRANSLATE_FEATURE(PERFMON_V2);
+	KVM_X86_TRANSLATE_FEATURE(RRSBA_CTRL);
+	default:
+		return x86_feature;
+	}
 }
 
 static __always_inline u32 __feature_leaf(int x86_feature)
diff --git a/arch/x86/kvm/svm/hyperv.h b/arch/x86/kvm/svm/hyperv.h
index 02f4784b5d44..d3f8bfc05832 100644
--- a/arch/x86/kvm/svm/hyperv.h
+++ b/arch/x86/kvm/svm/hyperv.h
@@ -11,6 +11,7 @@
 #include "../hyperv.h"
 #include "svm.h"
 
+#ifdef CONFIG_KVM_HYPERV
 static inline void nested_svm_hv_update_vm_vp_ids(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -41,5 +42,13 @@ static inline bool nested_svm_l2_tlb_flush_enabled(struct kvm_vcpu *vcpu)
 }
 
 void svm_hv_inject_synthetic_vmexit_post_tlb_flush(struct kvm_vcpu *vcpu);
+#else /* CONFIG_KVM_HYPERV */
+static inline void nested_svm_hv_update_vm_vp_ids(struct kvm_vcpu *vcpu) {}
+static inline bool nested_svm_l2_tlb_flush_enabled(struct kvm_vcpu *vcpu)
+{
+	return false;
+}
+static inline void svm_hv_inject_synthetic_vmexit_post_tlb_flush(struct kvm_vcpu *vcpu) {}
+#endif /* CONFIG_KVM_HYPERV */
 
 #endif /* __ARCH_X86_KVM_SVM_HYPERV_H__ */
diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index 3fea8c47679e..dee62362a360 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -187,7 +187,6 @@ void recalc_intercepts(struct vcpu_svm *svm)
  */
 static bool nested_svm_vmrun_msrpm(struct vcpu_svm *svm)
 {
-	struct hv_vmcb_enlightenments *hve = &svm->nested.ctl.hv_enlightenments;
 	int i;
 
 	/*
@@ -198,11 +197,16 @@ static bool nested_svm_vmrun_msrpm(struct vcpu_svm *svm)
 	 * - Nested hypervisor (L1) is using Hyper-V emulation interface and
 	 * tells KVM (L0) there were no changes in MSR bitmap for L2.
 	 */
-	if (!svm->nested.force_msr_bitmap_recalc &&
-	    kvm_hv_hypercall_enabled(&svm->vcpu) &&
-	    hve->hv_enlightenments_control.msr_bitmap &&
-	    (svm->nested.ctl.clean & BIT(HV_VMCB_NESTED_ENLIGHTENMENTS)))
-		goto set_msrpm_base_pa;
+#ifdef CONFIG_KVM_HYPERV
+	if (!svm->nested.force_msr_bitmap_recalc) {
+		struct hv_vmcb_enlightenments *hve = &svm->nested.ctl.hv_enlightenments;
+
+		if (kvm_hv_hypercall_enabled(&svm->vcpu) &&
+		    hve->hv_enlightenments_control.msr_bitmap &&
+		    (svm->nested.ctl.clean & BIT(HV_VMCB_NESTED_ENLIGHTENMENTS)))
+			goto set_msrpm_base_pa;
+	}
+#endif
 
 	if (!(vmcb12_is_intercept(&svm->nested.ctl, INTERCEPT_MSR_PROT)))
 		return true;
@@ -230,7 +234,9 @@ static bool nested_svm_vmrun_msrpm(struct vcpu_svm *svm)
 
 	svm->nested.force_msr_bitmap_recalc = false;
 
+#ifdef CONFIG_KVM_HYPERV
 set_msrpm_base_pa:
+#endif
 	svm->vmcb->control.msrpm_base_pa = __sme_set(__pa(svm->nested.msrpm));
 
 	return true;
@@ -247,18 +253,6 @@ static bool nested_svm_check_bitmap_pa(struct kvm_vcpu *vcpu, u64 pa, u32 size)
 	    kvm_vcpu_is_legal_gpa(vcpu, addr + size - 1);
 }
 
-static bool nested_svm_check_tlb_ctl(struct kvm_vcpu *vcpu, u8 tlb_ctl)
-{
-	/* Nested FLUSHBYASID is not supported yet.  */
-	switch(tlb_ctl) {
-		case TLB_CONTROL_DO_NOTHING:
-		case TLB_CONTROL_FLUSH_ALL_ASID:
-			return true;
-		default:
-			return false;
-	}
-}
-
 static bool __nested_vmcb_check_controls(struct kvm_vcpu *vcpu,
 					 struct vmcb_ctrl_area_cached *control)
 {
@@ -278,9 +272,6 @@ static bool __nested_vmcb_check_controls(struct kvm_vcpu *vcpu,
 					   IOPM_SIZE)))
 		return false;
 
-	if (CC(!nested_svm_check_tlb_ctl(vcpu, control->tlb_ctl)))
-		return false;
-
 	if (CC((control->int_ctl & V_NMI_ENABLE_MASK) &&
 	       !vmcb12_is_intercept(control, INTERCEPT_NMI))) {
 		return false;
@@ -311,7 +302,7 @@ static bool __nested_vmcb_check_save(struct kvm_vcpu *vcpu,
 	if ((save->efer & EFER_LME) && (save->cr0 & X86_CR0_PG)) {
 		if (CC(!(save->cr4 & X86_CR4_PAE)) ||
 		    CC(!(save->cr0 & X86_CR0_PE)) ||
-		    CC(kvm_vcpu_is_illegal_gpa(vcpu, save->cr3)))
+		    CC(!kvm_vcpu_is_legal_cr3(vcpu, save->cr3)))
 			return false;
 	}
 
@@ -378,12 +369,14 @@ void __nested_copy_vmcb_control_to_cache(struct kvm_vcpu *vcpu,
 	to->msrpm_base_pa &= ~0x0fffULL;
 	to->iopm_base_pa  &= ~0x0fffULL;
 
+#ifdef CONFIG_KVM_HYPERV
 	/* Hyper-V extensions (Enlightened VMCB) */
 	if (kvm_hv_hypercall_enabled(vcpu)) {
 		to->clean = from->clean;
 		memcpy(&to->hv_enlightenments, &from->hv_enlightenments,
 		       sizeof(to->hv_enlightenments));
 	}
+#endif
 }
 
 void nested_copy_vmcb_control_to_cache(struct vcpu_svm *svm,
@@ -487,14 +480,8 @@ static void nested_save_pending_event_to_vmcb12(struct vcpu_svm *svm,
 
 static void nested_svm_transition_tlb_flush(struct kvm_vcpu *vcpu)
 {
-	/*
-	 * KVM_REQ_HV_TLB_FLUSH flushes entries from either L1's VP_ID or
-	 * L2's VP_ID upon request from the guest. Make sure we check for
-	 * pending entries in the right FIFO upon L1/L2 transition as these
-	 * requests are put by other vCPUs asynchronously.
-	 */
-	if (to_hv_vcpu(vcpu) && npt_enabled)
-		kvm_make_request(KVM_REQ_HV_TLB_FLUSH, vcpu);
+	/* Handle pending Hyper-V TLB flush requests */
+	kvm_hv_nested_transtion_tlb_flush(vcpu, npt_enabled);
 
 	/*
 	 * TODO: optimize unconditional TLB flush/MMU sync.  A partial list of
@@ -520,7 +507,7 @@ static void nested_svm_transition_tlb_flush(struct kvm_vcpu *vcpu)
 static int nested_svm_load_cr3(struct kvm_vcpu *vcpu, unsigned long cr3,
 			       bool nested_npt, bool reload_pdptrs)
 {
-	if (CC(kvm_vcpu_is_illegal_gpa(vcpu, cr3)))
+	if (CC(!kvm_vcpu_is_legal_cr3(vcpu, cr3)))
 		return -EINVAL;
 
 	if (reload_pdptrs && !nested_npt && is_pae_paging(vcpu) &&
diff --git a/arch/x86/kvm/svm/pmu.c b/arch/x86/kvm/svm/pmu.c
index 373ff6a6687b..b6a7ad4d6914 100644
--- a/arch/x86/kvm/svm/pmu.c
+++ b/arch/x86/kvm/svm/pmu.c
@@ -161,7 +161,6 @@ static int amd_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	pmc = get_gp_pmc_amd(pmu, msr, PMU_TYPE_COUNTER);
 	if (pmc) {
 		pmc_write_counter(pmc, data);
-		pmc_update_sample_period(pmc);
 		return 0;
 	}
 	/* MSR_EVNTSELn */
@@ -233,21 +232,6 @@ static void amd_pmu_init(struct kvm_vcpu *vcpu)
 	}
 }
 
-static void amd_pmu_reset(struct kvm_vcpu *vcpu)
-{
-	struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
-	int i;
-
-	for (i = 0; i < KVM_AMD_PMC_MAX_GENERIC; i++) {
-		struct kvm_pmc *pmc = &pmu->gp_counters[i];
-
-		pmc_stop_counter(pmc);
-		pmc->counter = pmc->prev_counter = pmc->eventsel = 0;
-	}
-
-	pmu->global_ctrl = pmu->global_status = 0;
-}
-
 struct kvm_pmu_ops amd_pmu_ops __initdata = {
 	.hw_event_available = amd_hw_event_available,
 	.pmc_idx_to_pmc = amd_pmc_idx_to_pmc,
@@ -259,7 +243,6 @@ struct kvm_pmu_ops amd_pmu_ops __initdata = {
 	.set_msr = amd_pmu_set_msr,
 	.refresh = amd_pmu_refresh,
 	.init = amd_pmu_init,
-	.reset = amd_pmu_reset,
 	.EVENTSEL_EVENT = AMD64_EVENTSEL_EVENT,
 	.MAX_NR_GP_COUNTERS = KVM_AMD_PMC_MAX_GENERIC,
 	.MIN_NR_GP_COUNTERS = AMD64_NUM_COUNTERS,
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index 6ee925d66648..a8ce5226b3b5 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -57,7 +57,7 @@ static bool sev_es_enabled = true;
 module_param_named(sev_es, sev_es_enabled, bool, 0444);
 
 /* enable/disable SEV-ES DebugSwap support */
-static bool sev_es_debug_swap_enabled = true;
+static bool sev_es_debug_swap_enabled = false;
 module_param_named(debug_swap, sev_es_debug_swap_enabled, bool, 0444);
 #else
 #define sev_enabled false
@@ -612,8 +612,11 @@ static int sev_es_sync_vmsa(struct vcpu_svm *svm)
 	save->xss  = svm->vcpu.arch.ia32_xss;
 	save->dr6  = svm->vcpu.arch.dr6;
 
-	if (sev_es_debug_swap_enabled)
+	if (sev_es_debug_swap_enabled) {
 		save->sev_features |= SVM_SEV_FEAT_DEBUG_SWAP;
+		pr_warn_once("Enabling DebugSwap with KVM_SEV_ES_INIT. "
+			     "This will not work starting with Linux 6.10\n");
+	}
 
 	pr_debug("Virtual Machine Save Area (VMSA):\n");
 	print_hex_dump_debug("", DUMP_PREFIX_NONE, 16, 1, save, sizeof(*save), false);
@@ -1975,20 +1978,22 @@ int sev_mem_enc_register_region(struct kvm *kvm,
 		goto e_free;
 	}
 
-	region->uaddr = range->addr;
-	region->size = range->size;
-
-	list_add_tail(&region->list, &sev->regions_list);
-	mutex_unlock(&kvm->lock);
-
 	/*
 	 * The guest may change the memory encryption attribute from C=0 -> C=1
 	 * or vice versa for this memory range. Lets make sure caches are
 	 * flushed to ensure that guest data gets written into memory with
-	 * correct C-bit.
+	 * correct C-bit.  Note, this must be done before dropping kvm->lock,
+	 * as region and its array of pages can be freed by a different task
+	 * once kvm->lock is released.
 	 */
 	sev_clflush_pages(region->pages, region->npages);
 
+	region->uaddr = range->addr;
+	region->size = range->size;
+
+	list_add_tail(&region->list, &sev->regions_list);
+	mutex_unlock(&kvm->lock);
+
 	return ret;
 
 e_free:
@@ -2191,10 +2196,13 @@ void __init sev_hardware_setup(void)
 	/*
 	 * SEV must obviously be supported in hardware.  Sanity check that the
 	 * CPU supports decode assists, which is mandatory for SEV guests to
-	 * support instruction emulation.
+	 * support instruction emulation.  Ditto for flushing by ASID, as SEV
+	 * guests are bound to a single ASID, i.e. KVM can't rotate to a new
+	 * ASID to effect a TLB flush.
 	 */
 	if (!boot_cpu_has(X86_FEATURE_SEV) ||
-	    WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_DECODEASSISTS)))
+	    WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_DECODEASSISTS)) ||
+	    WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_FLUSHBYASID)))
 		goto out;
 
 	/* Retrieve SEV CPUID information */
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index a8bd4e909a1e..e90b429c84f1 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -3563,8 +3563,15 @@ static void svm_inject_nmi(struct kvm_vcpu *vcpu)
 	if (svm->nmi_l1_to_l2)
 		return;
 
-	svm->nmi_masked = true;
-	svm_set_iret_intercept(svm);
+	/*
+	 * No need to manually track NMI masking when vNMI is enabled, hardware
+	 * automatically sets V_NMI_BLOCKING_MASK as appropriate, including the
+	 * case where software directly injects an NMI.
+	 */
+	if (!is_vnmi_enabled(svm)) {
+		svm->nmi_masked = true;
+		svm_set_iret_intercept(svm);
+	}
 	++vcpu->stat.nmi_injections;
 }
 
@@ -4744,7 +4751,7 @@ static int svm_check_emulate_instruction(struct kvm_vcpu *vcpu, int emul_type,
 	 * Emulation is possible for SEV guests if and only if a prefilled
 	 * buffer containing the bytes of the intercepted instruction is
 	 * available. SEV guest memory is encrypted with a guest specific key
-	 * and cannot be decrypted by KVM, i.e. KVM would read cyphertext and
+	 * and cannot be decrypted by KVM, i.e. KVM would read ciphertext and
 	 * decode garbage.
 	 *
 	 * If KVM is NOT trying to simply skip an instruction, inject #UD if
@@ -5079,6 +5086,13 @@ static __init void svm_set_cpu_caps(void)
 		kvm_cpu_cap_set(X86_FEATURE_SVM);
 		kvm_cpu_cap_set(X86_FEATURE_VMCBCLEAN);
 
+		/*
+		 * KVM currently flushes TLBs on *every* nested SVM transition,
+		 * and so for all intents and purposes KVM supports flushing by
+		 * ASID, i.e. KVM is guaranteed to honor every L1 ASID flush.
+		 */
+		kvm_cpu_cap_set(X86_FEATURE_FLUSHBYASID);
+
 		if (nrips)
 			kvm_cpu_cap_set(X86_FEATURE_NRIPS);
 
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index c409f934c377..8ef95139cd24 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -148,7 +148,9 @@ struct vmcb_ctrl_area_cached {
 	u64 virt_ext;
 	u32 clean;
 	union {
+#if IS_ENABLED(CONFIG_HYPERV) || IS_ENABLED(CONFIG_KVM_HYPERV)
 		struct hv_vmcb_enlightenments hv_enlightenments;
+#endif
 		u8 reserved_sw[32];
 	};
 };
diff --git a/arch/x86/kvm/svm/svm_onhyperv.c b/arch/x86/kvm/svm/svm_onhyperv.c
index 7af8422d3382..3971b3ea5d04 100644
--- a/arch/x86/kvm/svm/svm_onhyperv.c
+++ b/arch/x86/kvm/svm/svm_onhyperv.c
@@ -18,18 +18,14 @@
 int svm_hv_enable_l2_tlb_flush(struct kvm_vcpu *vcpu)
 {
 	struct hv_vmcb_enlightenments *hve;
-	struct hv_partition_assist_pg **p_hv_pa_pg =
-			&to_kvm_hv(vcpu->kvm)->hv_pa_pg;
+	hpa_t partition_assist_page = hv_get_partition_assist_page(vcpu);
 
-	if (!*p_hv_pa_pg)
-		*p_hv_pa_pg = kzalloc(PAGE_SIZE, GFP_KERNEL);
-
-	if (!*p_hv_pa_pg)
+	if (partition_assist_page == INVALID_PAGE)
 		return -ENOMEM;
 
 	hve = &to_svm(vcpu)->vmcb->control.hv_enlightenments;
 
-	hve->partition_assist_page = __pa(*p_hv_pa_pg);
+	hve->partition_assist_page = partition_assist_page;
 	hve->hv_vm_id = (unsigned long)vcpu->kvm;
 	if (!hve->hv_enlightenments_control.nested_flush_hypercall) {
 		hve->hv_enlightenments_control.nested_flush_hypercall = 1;
diff --git a/arch/x86/kvm/svm/svm_ops.h b/arch/x86/kvm/svm/svm_ops.h
index 36c8af87a707..4e725854c63a 100644
--- a/arch/x86/kvm/svm/svm_ops.h
+++ b/arch/x86/kvm/svm/svm_ops.h
@@ -8,7 +8,7 @@
 
 #define svm_asm(insn, clobber...)				\
 do {								\
-	asm_volatile_goto("1: " __stringify(insn) "\n\t"	\
+	asm goto("1: " __stringify(insn) "\n\t"	\
 			  _ASM_EXTABLE(1b, %l[fault])		\
 			  ::: clobber : fault);			\
 	return;							\
@@ -18,7 +18,7 @@ fault:								\
 
 #define svm_asm1(insn, op1, clobber...)				\
 do {								\
-	asm_volatile_goto("1: "  __stringify(insn) " %0\n\t"	\
+	asm goto("1: "  __stringify(insn) " %0\n\t"	\
 			  _ASM_EXTABLE(1b, %l[fault])		\
 			  :: op1 : clobber : fault);		\
 	return;							\
@@ -28,7 +28,7 @@ fault:								\
 
 #define svm_asm2(insn, op1, op2, clobber...)				\
 do {									\
-	asm_volatile_goto("1: "  __stringify(insn) " %1, %0\n\t"	\
+	asm goto("1: "  __stringify(insn) " %1, %0\n\t"	\
 			  _ASM_EXTABLE(1b, %l[fault])			\
 			  :: op1, op2 : clobber : fault);		\
 	return;								\
diff --git a/arch/x86/kvm/svm/vmenter.S b/arch/x86/kvm/svm/vmenter.S
index ef2ebabb059c..9499f9c6b077 100644
--- a/arch/x86/kvm/svm/vmenter.S
+++ b/arch/x86/kvm/svm/vmenter.S
@@ -270,16 +270,16 @@ SYM_FUNC_START(__svm_vcpu_run)
 	RESTORE_GUEST_SPEC_CTRL_BODY
 	RESTORE_HOST_SPEC_CTRL_BODY
 
-10:	cmpb $0, kvm_rebooting
+10:	cmpb $0, _ASM_RIP(kvm_rebooting)
 	jne 2b
 	ud2
-30:	cmpb $0, kvm_rebooting
+30:	cmpb $0, _ASM_RIP(kvm_rebooting)
 	jne 4b
 	ud2
-50:	cmpb $0, kvm_rebooting
+50:	cmpb $0, _ASM_RIP(kvm_rebooting)
 	jne 6b
 	ud2
-70:	cmpb $0, kvm_rebooting
+70:	cmpb $0, _ASM_RIP(kvm_rebooting)
 	jne 8b
 	ud2
 
@@ -381,7 +381,7 @@ SYM_FUNC_START(__svm_sev_es_vcpu_run)
 	RESTORE_GUEST_SPEC_CTRL_BODY
 	RESTORE_HOST_SPEC_CTRL_BODY
 
-3:	cmpb $0, kvm_rebooting
+3:	cmpb $0, _ASM_RIP(kvm_rebooting)
 	jne 2b
 	ud2
 
diff --git a/arch/x86/kvm/vmx/hyperv.c b/arch/x86/kvm/vmx/hyperv.c
index 313b8bb5b8a7..fab6a1ad98dc 100644
--- a/arch/x86/kvm/vmx/hyperv.c
+++ b/arch/x86/kvm/vmx/hyperv.c
@@ -13,419 +13,6 @@
 
 #define CC KVM_NESTED_VMENTER_CONSISTENCY_CHECK
 
-/*
- * Enlightened VMCSv1 doesn't support these:
- *
- *	POSTED_INTR_NV                  = 0x00000002,
- *	GUEST_INTR_STATUS               = 0x00000810,
- *	APIC_ACCESS_ADDR		= 0x00002014,
- *	POSTED_INTR_DESC_ADDR           = 0x00002016,
- *	EOI_EXIT_BITMAP0                = 0x0000201c,
- *	EOI_EXIT_BITMAP1                = 0x0000201e,
- *	EOI_EXIT_BITMAP2                = 0x00002020,
- *	EOI_EXIT_BITMAP3                = 0x00002022,
- *	GUEST_PML_INDEX			= 0x00000812,
- *	PML_ADDRESS			= 0x0000200e,
- *	VM_FUNCTION_CONTROL             = 0x00002018,
- *	EPTP_LIST_ADDRESS               = 0x00002024,
- *	VMREAD_BITMAP                   = 0x00002026,
- *	VMWRITE_BITMAP                  = 0x00002028,
- *
- *	TSC_MULTIPLIER                  = 0x00002032,
- *	PLE_GAP                         = 0x00004020,
- *	PLE_WINDOW                      = 0x00004022,
- *	VMX_PREEMPTION_TIMER_VALUE      = 0x0000482E,
- *
- * Currently unsupported in KVM:
- *	GUEST_IA32_RTIT_CTL		= 0x00002814,
- */
-#define EVMCS1_SUPPORTED_PINCTRL					\
-	(PIN_BASED_ALWAYSON_WITHOUT_TRUE_MSR |				\
-	 PIN_BASED_EXT_INTR_MASK |					\
-	 PIN_BASED_NMI_EXITING |					\
-	 PIN_BASED_VIRTUAL_NMIS)
-
-#define EVMCS1_SUPPORTED_EXEC_CTRL					\
-	(CPU_BASED_ALWAYSON_WITHOUT_TRUE_MSR |				\
-	 CPU_BASED_HLT_EXITING |					\
-	 CPU_BASED_CR3_LOAD_EXITING |					\
-	 CPU_BASED_CR3_STORE_EXITING |					\
-	 CPU_BASED_UNCOND_IO_EXITING |					\
-	 CPU_BASED_MOV_DR_EXITING |					\
-	 CPU_BASED_USE_TSC_OFFSETTING |					\
-	 CPU_BASED_MWAIT_EXITING |					\
-	 CPU_BASED_MONITOR_EXITING |					\
-	 CPU_BASED_INVLPG_EXITING |					\
-	 CPU_BASED_RDPMC_EXITING |					\
-	 CPU_BASED_INTR_WINDOW_EXITING |				\
-	 CPU_BASED_CR8_LOAD_EXITING |					\
-	 CPU_BASED_CR8_STORE_EXITING |					\
-	 CPU_BASED_RDTSC_EXITING |					\
-	 CPU_BASED_TPR_SHADOW |						\
-	 CPU_BASED_USE_IO_BITMAPS |					\
-	 CPU_BASED_MONITOR_TRAP_FLAG |					\
-	 CPU_BASED_USE_MSR_BITMAPS |					\
-	 CPU_BASED_NMI_WINDOW_EXITING |					\
-	 CPU_BASED_PAUSE_EXITING |					\
-	 CPU_BASED_ACTIVATE_SECONDARY_CONTROLS)
-
-#define EVMCS1_SUPPORTED_2NDEXEC					\
-	(SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE |			\
-	 SECONDARY_EXEC_WBINVD_EXITING |				\
-	 SECONDARY_EXEC_ENABLE_VPID |					\
-	 SECONDARY_EXEC_ENABLE_EPT |					\
-	 SECONDARY_EXEC_UNRESTRICTED_GUEST |				\
-	 SECONDARY_EXEC_DESC |						\
-	 SECONDARY_EXEC_ENABLE_RDTSCP |					\
-	 SECONDARY_EXEC_ENABLE_INVPCID |				\
-	 SECONDARY_EXEC_ENABLE_XSAVES |					\
-	 SECONDARY_EXEC_RDSEED_EXITING |				\
-	 SECONDARY_EXEC_RDRAND_EXITING |				\
-	 SECONDARY_EXEC_TSC_SCALING |					\
-	 SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE |				\
-	 SECONDARY_EXEC_PT_USE_GPA |					\
-	 SECONDARY_EXEC_PT_CONCEAL_VMX |				\
-	 SECONDARY_EXEC_BUS_LOCK_DETECTION |				\
-	 SECONDARY_EXEC_NOTIFY_VM_EXITING |				\
-	 SECONDARY_EXEC_ENCLS_EXITING)
-
-#define EVMCS1_SUPPORTED_3RDEXEC (0ULL)
-
-#define EVMCS1_SUPPORTED_VMEXIT_CTRL					\
-	(VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR |				\
-	 VM_EXIT_SAVE_DEBUG_CONTROLS |					\
-	 VM_EXIT_ACK_INTR_ON_EXIT |					\
-	 VM_EXIT_HOST_ADDR_SPACE_SIZE |					\
-	 VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL |				\
-	 VM_EXIT_SAVE_IA32_PAT |					\
-	 VM_EXIT_LOAD_IA32_PAT |					\
-	 VM_EXIT_SAVE_IA32_EFER |					\
-	 VM_EXIT_LOAD_IA32_EFER |					\
-	 VM_EXIT_CLEAR_BNDCFGS |					\
-	 VM_EXIT_PT_CONCEAL_PIP |					\
-	 VM_EXIT_CLEAR_IA32_RTIT_CTL)
-
-#define EVMCS1_SUPPORTED_VMENTRY_CTRL					\
-	(VM_ENTRY_ALWAYSON_WITHOUT_TRUE_MSR |				\
-	 VM_ENTRY_LOAD_DEBUG_CONTROLS |					\
-	 VM_ENTRY_IA32E_MODE |						\
-	 VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL |				\
-	 VM_ENTRY_LOAD_IA32_PAT |					\
-	 VM_ENTRY_LOAD_IA32_EFER |					\
-	 VM_ENTRY_LOAD_BNDCFGS |					\
-	 VM_ENTRY_PT_CONCEAL_PIP |					\
-	 VM_ENTRY_LOAD_IA32_RTIT_CTL)
-
-#define EVMCS1_SUPPORTED_VMFUNC (0)
-
-#define EVMCS1_OFFSET(x) offsetof(struct hv_enlightened_vmcs, x)
-#define EVMCS1_FIELD(number, name, clean_field)[ROL16(number, 6)] = \
-		{EVMCS1_OFFSET(name), clean_field}
-
-const struct evmcs_field vmcs_field_to_evmcs_1[] = {
-	/* 64 bit rw */
-	EVMCS1_FIELD(GUEST_RIP, guest_rip,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
-	EVMCS1_FIELD(GUEST_RSP, guest_rsp,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_BASIC),
-	EVMCS1_FIELD(GUEST_RFLAGS, guest_rflags,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_BASIC),
-	EVMCS1_FIELD(HOST_IA32_PAT, host_ia32_pat,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(HOST_IA32_EFER, host_ia32_efer,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(HOST_IA32_PERF_GLOBAL_CTRL, host_ia32_perf_global_ctrl,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(HOST_CR0, host_cr0,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(HOST_CR3, host_cr3,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(HOST_CR4, host_cr4,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(HOST_IA32_SYSENTER_ESP, host_ia32_sysenter_esp,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(HOST_IA32_SYSENTER_EIP, host_ia32_sysenter_eip,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(HOST_RIP, host_rip,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(IO_BITMAP_A, io_bitmap_a,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_IO_BITMAP),
-	EVMCS1_FIELD(IO_BITMAP_B, io_bitmap_b,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_IO_BITMAP),
-	EVMCS1_FIELD(MSR_BITMAP, msr_bitmap,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_MSR_BITMAP),
-	EVMCS1_FIELD(GUEST_ES_BASE, guest_es_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_CS_BASE, guest_cs_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_SS_BASE, guest_ss_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_DS_BASE, guest_ds_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_FS_BASE, guest_fs_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_GS_BASE, guest_gs_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_LDTR_BASE, guest_ldtr_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_TR_BASE, guest_tr_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_GDTR_BASE, guest_gdtr_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_IDTR_BASE, guest_idtr_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(TSC_OFFSET, tsc_offset,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP2),
-	EVMCS1_FIELD(VIRTUAL_APIC_PAGE_ADDR, virtual_apic_page_addr,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP2),
-	EVMCS1_FIELD(VMCS_LINK_POINTER, vmcs_link_pointer,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	EVMCS1_FIELD(GUEST_IA32_DEBUGCTL, guest_ia32_debugctl,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	EVMCS1_FIELD(GUEST_IA32_PAT, guest_ia32_pat,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	EVMCS1_FIELD(GUEST_IA32_EFER, guest_ia32_efer,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	EVMCS1_FIELD(GUEST_IA32_PERF_GLOBAL_CTRL, guest_ia32_perf_global_ctrl,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	EVMCS1_FIELD(GUEST_PDPTR0, guest_pdptr0,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	EVMCS1_FIELD(GUEST_PDPTR1, guest_pdptr1,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	EVMCS1_FIELD(GUEST_PDPTR2, guest_pdptr2,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	EVMCS1_FIELD(GUEST_PDPTR3, guest_pdptr3,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	EVMCS1_FIELD(GUEST_PENDING_DBG_EXCEPTIONS, guest_pending_dbg_exceptions,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	EVMCS1_FIELD(GUEST_SYSENTER_ESP, guest_sysenter_esp,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	EVMCS1_FIELD(GUEST_SYSENTER_EIP, guest_sysenter_eip,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	EVMCS1_FIELD(CR0_GUEST_HOST_MASK, cr0_guest_host_mask,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
-	EVMCS1_FIELD(CR4_GUEST_HOST_MASK, cr4_guest_host_mask,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
-	EVMCS1_FIELD(CR0_READ_SHADOW, cr0_read_shadow,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
-	EVMCS1_FIELD(CR4_READ_SHADOW, cr4_read_shadow,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
-	EVMCS1_FIELD(GUEST_CR0, guest_cr0,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
-	EVMCS1_FIELD(GUEST_CR3, guest_cr3,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
-	EVMCS1_FIELD(GUEST_CR4, guest_cr4,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
-	EVMCS1_FIELD(GUEST_DR7, guest_dr7,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
-	EVMCS1_FIELD(HOST_FS_BASE, host_fs_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_POINTER),
-	EVMCS1_FIELD(HOST_GS_BASE, host_gs_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_POINTER),
-	EVMCS1_FIELD(HOST_TR_BASE, host_tr_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_POINTER),
-	EVMCS1_FIELD(HOST_GDTR_BASE, host_gdtr_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_POINTER),
-	EVMCS1_FIELD(HOST_IDTR_BASE, host_idtr_base,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_POINTER),
-	EVMCS1_FIELD(HOST_RSP, host_rsp,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_POINTER),
-	EVMCS1_FIELD(EPT_POINTER, ept_pointer,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_XLAT),
-	EVMCS1_FIELD(GUEST_BNDCFGS, guest_bndcfgs,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	EVMCS1_FIELD(XSS_EXIT_BITMAP, xss_exit_bitmap,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP2),
-	EVMCS1_FIELD(ENCLS_EXITING_BITMAP, encls_exiting_bitmap,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP2),
-	EVMCS1_FIELD(TSC_MULTIPLIER, tsc_multiplier,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP2),
-	/*
-	 * Not used by KVM:
-	 *
-	 * EVMCS1_FIELD(0x00006828, guest_ia32_s_cet,
-	 *	     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	 * EVMCS1_FIELD(0x0000682A, guest_ssp,
-	 *	     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_BASIC),
-	 * EVMCS1_FIELD(0x0000682C, guest_ia32_int_ssp_table_addr,
-	 *	     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	 * EVMCS1_FIELD(0x00002816, guest_ia32_lbr_ctl,
-	 *	     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	 * EVMCS1_FIELD(0x00006C18, host_ia32_s_cet,
-	 *	     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	 * EVMCS1_FIELD(0x00006C1A, host_ssp,
-	 *	     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	 * EVMCS1_FIELD(0x00006C1C, host_ia32_int_ssp_table_addr,
-	 *	     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	 */
-
-	/* 64 bit read only */
-	EVMCS1_FIELD(GUEST_PHYSICAL_ADDRESS, guest_physical_address,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
-	EVMCS1_FIELD(EXIT_QUALIFICATION, exit_qualification,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
-	/*
-	 * Not defined in KVM:
-	 *
-	 * EVMCS1_FIELD(0x00006402, exit_io_instruction_ecx,
-	 *		HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE);
-	 * EVMCS1_FIELD(0x00006404, exit_io_instruction_esi,
-	 *		HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE);
-	 * EVMCS1_FIELD(0x00006406, exit_io_instruction_esi,
-	 *		HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE);
-	 * EVMCS1_FIELD(0x00006408, exit_io_instruction_eip,
-	 *		HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE);
-	 */
-	EVMCS1_FIELD(GUEST_LINEAR_ADDRESS, guest_linear_address,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
-
-	/*
-	 * No mask defined in the spec as Hyper-V doesn't currently support
-	 * these. Future proof by resetting the whole clean field mask on
-	 * access.
-	 */
-	EVMCS1_FIELD(VM_EXIT_MSR_STORE_ADDR, vm_exit_msr_store_addr,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
-	EVMCS1_FIELD(VM_EXIT_MSR_LOAD_ADDR, vm_exit_msr_load_addr,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
-	EVMCS1_FIELD(VM_ENTRY_MSR_LOAD_ADDR, vm_entry_msr_load_addr,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
-
-	/* 32 bit rw */
-	EVMCS1_FIELD(TPR_THRESHOLD, tpr_threshold,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
-	EVMCS1_FIELD(GUEST_INTERRUPTIBILITY_INFO, guest_interruptibility_info,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_BASIC),
-	EVMCS1_FIELD(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_PROC),
-	EVMCS1_FIELD(EXCEPTION_BITMAP, exception_bitmap,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_EXCPN),
-	EVMCS1_FIELD(VM_ENTRY_CONTROLS, vm_entry_controls,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_ENTRY),
-	EVMCS1_FIELD(VM_ENTRY_INTR_INFO_FIELD, vm_entry_intr_info_field,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_EVENT),
-	EVMCS1_FIELD(VM_ENTRY_EXCEPTION_ERROR_CODE,
-		     vm_entry_exception_error_code,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_EVENT),
-	EVMCS1_FIELD(VM_ENTRY_INSTRUCTION_LEN, vm_entry_instruction_len,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_EVENT),
-	EVMCS1_FIELD(HOST_IA32_SYSENTER_CS, host_ia32_sysenter_cs,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(PIN_BASED_VM_EXEC_CONTROL, pin_based_vm_exec_control,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP1),
-	EVMCS1_FIELD(VM_EXIT_CONTROLS, vm_exit_controls,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP1),
-	EVMCS1_FIELD(SECONDARY_VM_EXEC_CONTROL, secondary_vm_exec_control,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP1),
-	EVMCS1_FIELD(GUEST_ES_LIMIT, guest_es_limit,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_CS_LIMIT, guest_cs_limit,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_SS_LIMIT, guest_ss_limit,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_DS_LIMIT, guest_ds_limit,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_FS_LIMIT, guest_fs_limit,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_GS_LIMIT, guest_gs_limit,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_LDTR_LIMIT, guest_ldtr_limit,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_TR_LIMIT, guest_tr_limit,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_GDTR_LIMIT, guest_gdtr_limit,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_IDTR_LIMIT, guest_idtr_limit,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_ES_AR_BYTES, guest_es_ar_bytes,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_CS_AR_BYTES, guest_cs_ar_bytes,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_SS_AR_BYTES, guest_ss_ar_bytes,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_DS_AR_BYTES, guest_ds_ar_bytes,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_FS_AR_BYTES, guest_fs_ar_bytes,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_GS_AR_BYTES, guest_gs_ar_bytes,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_LDTR_AR_BYTES, guest_ldtr_ar_bytes,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_TR_AR_BYTES, guest_tr_ar_bytes,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_ACTIVITY_STATE, guest_activity_state,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-	EVMCS1_FIELD(GUEST_SYSENTER_CS, guest_sysenter_cs,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
-
-	/* 32 bit read only */
-	EVMCS1_FIELD(VM_INSTRUCTION_ERROR, vm_instruction_error,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
-	EVMCS1_FIELD(VM_EXIT_REASON, vm_exit_reason,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
-	EVMCS1_FIELD(VM_EXIT_INTR_INFO, vm_exit_intr_info,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
-	EVMCS1_FIELD(VM_EXIT_INTR_ERROR_CODE, vm_exit_intr_error_code,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
-	EVMCS1_FIELD(IDT_VECTORING_INFO_FIELD, idt_vectoring_info_field,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
-	EVMCS1_FIELD(IDT_VECTORING_ERROR_CODE, idt_vectoring_error_code,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
-	EVMCS1_FIELD(VM_EXIT_INSTRUCTION_LEN, vm_exit_instruction_len,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
-	EVMCS1_FIELD(VMX_INSTRUCTION_INFO, vmx_instruction_info,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
-
-	/* No mask defined in the spec (not used) */
-	EVMCS1_FIELD(PAGE_FAULT_ERROR_CODE_MASK, page_fault_error_code_mask,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
-	EVMCS1_FIELD(PAGE_FAULT_ERROR_CODE_MATCH, page_fault_error_code_match,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
-	EVMCS1_FIELD(CR3_TARGET_COUNT, cr3_target_count,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
-	EVMCS1_FIELD(VM_EXIT_MSR_STORE_COUNT, vm_exit_msr_store_count,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
-	EVMCS1_FIELD(VM_EXIT_MSR_LOAD_COUNT, vm_exit_msr_load_count,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
-	EVMCS1_FIELD(VM_ENTRY_MSR_LOAD_COUNT, vm_entry_msr_load_count,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
-
-	/* 16 bit rw */
-	EVMCS1_FIELD(HOST_ES_SELECTOR, host_es_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(HOST_CS_SELECTOR, host_cs_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(HOST_SS_SELECTOR, host_ss_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(HOST_DS_SELECTOR, host_ds_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(HOST_FS_SELECTOR, host_fs_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(HOST_GS_SELECTOR, host_gs_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(HOST_TR_SELECTOR, host_tr_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
-	EVMCS1_FIELD(GUEST_ES_SELECTOR, guest_es_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_CS_SELECTOR, guest_cs_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_SS_SELECTOR, guest_ss_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_DS_SELECTOR, guest_ds_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_FS_SELECTOR, guest_fs_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_GS_SELECTOR, guest_gs_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_LDTR_SELECTOR, guest_ldtr_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(GUEST_TR_SELECTOR, guest_tr_selector,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
-	EVMCS1_FIELD(VIRTUAL_PROCESSOR_ID, virtual_processor_id,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_XLAT),
-};
-const unsigned int nr_evmcs_1_fields = ARRAY_SIZE(vmcs_field_to_evmcs_1);
-
 u64 nested_get_evmptr(struct kvm_vcpu *vcpu)
 {
 	struct kvm_vcpu_hv *hv_vcpu = to_hv_vcpu(vcpu);
@@ -608,40 +195,6 @@ int nested_evmcs_check_controls(struct vmcs12 *vmcs12)
 	return 0;
 }
 
-#if IS_ENABLED(CONFIG_HYPERV)
-DEFINE_STATIC_KEY_FALSE(__kvm_is_using_evmcs);
-
-/*
- * KVM on Hyper-V always uses the latest known eVMCSv1 revision, the assumption
- * is: in case a feature has corresponding fields in eVMCS described and it was
- * exposed in VMX feature MSRs, KVM is free to use it. Warn if KVM meets a
- * feature which has no corresponding eVMCS field, this likely means that KVM
- * needs to be updated.
- */
-#define evmcs_check_vmcs_conf(field, ctrl)					\
-	do {									\
-		typeof(vmcs_conf->field) unsupported;				\
-										\
-		unsupported = vmcs_conf->field & ~EVMCS1_SUPPORTED_ ## ctrl;	\
-		if (unsupported) {						\
-			pr_warn_once(#field " unsupported with eVMCS: 0x%llx\n",\
-				     (u64)unsupported);				\
-			vmcs_conf->field &= EVMCS1_SUPPORTED_ ## ctrl;		\
-		}								\
-	}									\
-	while (0)
-
-void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf)
-{
-	evmcs_check_vmcs_conf(cpu_based_exec_ctrl, EXEC_CTRL);
-	evmcs_check_vmcs_conf(pin_based_exec_ctrl, PINCTRL);
-	evmcs_check_vmcs_conf(cpu_based_2nd_exec_ctrl, 2NDEXEC);
-	evmcs_check_vmcs_conf(cpu_based_3rd_exec_ctrl, 3RDEXEC);
-	evmcs_check_vmcs_conf(vmentry_ctrl, VMENTRY_CTRL);
-	evmcs_check_vmcs_conf(vmexit_ctrl, VMEXIT_CTRL);
-}
-#endif
-
 int nested_enable_evmcs(struct kvm_vcpu *vcpu,
 			uint16_t *vmcs_version)
 {
diff --git a/arch/x86/kvm/vmx/hyperv.h b/arch/x86/kvm/vmx/hyperv.h
index 9623fe1651c4..a87407412615 100644
--- a/arch/x86/kvm/vmx/hyperv.h
+++ b/arch/x86/kvm/vmx/hyperv.h
@@ -2,199 +2,89 @@
 #ifndef __KVM_X86_VMX_HYPERV_H
 #define __KVM_X86_VMX_HYPERV_H
 
-#include <linux/jump_label.h>
-
-#include <asm/hyperv-tlfs.h>
-#include <asm/mshyperv.h>
-#include <asm/vmx.h>
-
-#include "../hyperv.h"
-
-#include "capabilities.h"
-#include "vmcs.h"
+#include <linux/kvm_host.h>
 #include "vmcs12.h"
+#include "vmx.h"
 
-struct vmcs_config;
-
-#define current_evmcs ((struct hv_enlightened_vmcs *)this_cpu_read(current_vmcs))
-
-#define KVM_EVMCS_VERSION 1
+#define EVMPTR_INVALID (-1ULL)
+#define EVMPTR_MAP_PENDING (-2ULL)
 
-struct evmcs_field {
-	u16 offset;
-	u16 clean_field;
+enum nested_evmptrld_status {
+	EVMPTRLD_DISABLED,
+	EVMPTRLD_SUCCEEDED,
+	EVMPTRLD_VMFAIL,
+	EVMPTRLD_ERROR,
 };
 
-extern const struct evmcs_field vmcs_field_to_evmcs_1[];
-extern const unsigned int nr_evmcs_1_fields;
-
-static __always_inline int evmcs_field_offset(unsigned long field,
-					      u16 *clean_field)
-{
-	unsigned int index = ROL16(field, 6);
-	const struct evmcs_field *evmcs_field;
-
-	if (unlikely(index >= nr_evmcs_1_fields))
-		return -ENOENT;
-
-	evmcs_field = &vmcs_field_to_evmcs_1[index];
-
-	/*
-	 * Use offset=0 to detect holes in eVMCS. This offset belongs to
-	 * 'revision_id' but this field has no encoding and is supposed to
-	 * be accessed directly.
-	 */
-	if (unlikely(!evmcs_field->offset))
-		return -ENOENT;
-
-	if (clean_field)
-		*clean_field = evmcs_field->clean_field;
-
-	return evmcs_field->offset;
-}
-
-static inline u64 evmcs_read_any(struct hv_enlightened_vmcs *evmcs,
-				 unsigned long field, u16 offset)
+#ifdef CONFIG_KVM_HYPERV
+static inline bool evmptr_is_valid(u64 evmptr)
 {
-	/*
-	 * vmcs12_read_any() doesn't care whether the supplied structure
-	 * is 'struct vmcs12' or 'struct hv_enlightened_vmcs' as it takes
-	 * the exact offset of the required field, use it for convenience
-	 * here.
-	 */
-	return vmcs12_read_any((void *)evmcs, field, offset);
+	return evmptr != EVMPTR_INVALID && evmptr != EVMPTR_MAP_PENDING;
 }
 
-#if IS_ENABLED(CONFIG_HYPERV)
-
-DECLARE_STATIC_KEY_FALSE(__kvm_is_using_evmcs);
-
-static __always_inline bool kvm_is_using_evmcs(void)
+static inline bool nested_vmx_is_evmptr12_valid(struct vcpu_vmx *vmx)
 {
-	return static_branch_unlikely(&__kvm_is_using_evmcs);
+	return evmptr_is_valid(vmx->nested.hv_evmcs_vmptr);
 }
 
-static __always_inline int get_evmcs_offset(unsigned long field,
-					    u16 *clean_field)
+static inline bool evmptr_is_set(u64 evmptr)
 {
-	int offset = evmcs_field_offset(field, clean_field);
-
-	WARN_ONCE(offset < 0, "accessing unsupported EVMCS field %lx\n", field);
-	return offset;
+	return evmptr != EVMPTR_INVALID;
 }
 
-static __always_inline void evmcs_write64(unsigned long field, u64 value)
+static inline bool nested_vmx_is_evmptr12_set(struct vcpu_vmx *vmx)
 {
-	u16 clean_field;
-	int offset = get_evmcs_offset(field, &clean_field);
-
-	if (offset < 0)
-		return;
-
-	*(u64 *)((char *)current_evmcs + offset) = value;
-
-	current_evmcs->hv_clean_fields &= ~clean_field;
+	return evmptr_is_set(vmx->nested.hv_evmcs_vmptr);
 }
 
-static __always_inline void evmcs_write32(unsigned long field, u32 value)
+static inline struct hv_enlightened_vmcs *nested_vmx_evmcs(struct vcpu_vmx *vmx)
 {
-	u16 clean_field;
-	int offset = get_evmcs_offset(field, &clean_field);
-
-	if (offset < 0)
-		return;
-
-	*(u32 *)((char *)current_evmcs + offset) = value;
-	current_evmcs->hv_clean_fields &= ~clean_field;
+	return vmx->nested.hv_evmcs;
 }
 
-static __always_inline void evmcs_write16(unsigned long field, u16 value)
+static inline bool guest_cpuid_has_evmcs(struct kvm_vcpu *vcpu)
 {
-	u16 clean_field;
-	int offset = get_evmcs_offset(field, &clean_field);
-
-	if (offset < 0)
-		return;
-
-	*(u16 *)((char *)current_evmcs + offset) = value;
-	current_evmcs->hv_clean_fields &= ~clean_field;
+	/*
+	 * eVMCS is exposed to the guest if Hyper-V is enabled in CPUID and
+	 * eVMCS has been explicitly enabled by userspace.
+	 */
+	return vcpu->arch.hyperv_enabled &&
+	       to_vmx(vcpu)->nested.enlightened_vmcs_enabled;
 }
 
-static __always_inline u64 evmcs_read64(unsigned long field)
+u64 nested_get_evmptr(struct kvm_vcpu *vcpu);
+uint16_t nested_get_evmcs_version(struct kvm_vcpu *vcpu);
+int nested_enable_evmcs(struct kvm_vcpu *vcpu,
+			uint16_t *vmcs_version);
+void nested_evmcs_filter_control_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
+int nested_evmcs_check_controls(struct vmcs12 *vmcs12);
+bool nested_evmcs_l2_tlb_flush_enabled(struct kvm_vcpu *vcpu);
+void vmx_hv_inject_synthetic_vmexit_post_tlb_flush(struct kvm_vcpu *vcpu);
+#else
+static inline bool evmptr_is_valid(u64 evmptr)
 {
-	int offset = get_evmcs_offset(field, NULL);
-
-	if (offset < 0)
-		return 0;
-
-	return *(u64 *)((char *)current_evmcs + offset);
+	return false;
 }
 
-static __always_inline u32 evmcs_read32(unsigned long field)
+static inline bool nested_vmx_is_evmptr12_valid(struct vcpu_vmx *vmx)
 {
-	int offset = get_evmcs_offset(field, NULL);
-
-	if (offset < 0)
-		return 0;
-
-	return *(u32 *)((char *)current_evmcs + offset);
+	return false;
 }
 
-static __always_inline u16 evmcs_read16(unsigned long field)
+static inline bool evmptr_is_set(u64 evmptr)
 {
-	int offset = get_evmcs_offset(field, NULL);
-
-	if (offset < 0)
-		return 0;
-
-	return *(u16 *)((char *)current_evmcs + offset);
+	return false;
 }
 
-static inline void evmcs_load(u64 phys_addr)
+static inline bool nested_vmx_is_evmptr12_set(struct vcpu_vmx *vmx)
 {
-	struct hv_vp_assist_page *vp_ap =
-		hv_get_vp_assist_page(smp_processor_id());
-
-	if (current_evmcs->hv_enlightenments_control.nested_flush_hypercall)
-		vp_ap->nested_control.features.directhypercall = 1;
-	vp_ap->current_nested_vmcs = phys_addr;
-	vp_ap->enlighten_vmentry = 1;
+	return false;
 }
 
-void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf);
-#else /* !IS_ENABLED(CONFIG_HYPERV) */
-static __always_inline bool kvm_is_using_evmcs(void) { return false; }
-static __always_inline void evmcs_write64(unsigned long field, u64 value) {}
-static __always_inline void evmcs_write32(unsigned long field, u32 value) {}
-static __always_inline void evmcs_write16(unsigned long field, u16 value) {}
-static __always_inline u64 evmcs_read64(unsigned long field) { return 0; }
-static __always_inline u32 evmcs_read32(unsigned long field) { return 0; }
-static __always_inline u16 evmcs_read16(unsigned long field) { return 0; }
-static inline void evmcs_load(u64 phys_addr) {}
-#endif /* IS_ENABLED(CONFIG_HYPERV) */
-
-#define EVMPTR_INVALID (-1ULL)
-#define EVMPTR_MAP_PENDING (-2ULL)
-
-static inline bool evmptr_is_valid(u64 evmptr)
+static inline struct hv_enlightened_vmcs *nested_vmx_evmcs(struct vcpu_vmx *vmx)
 {
-	return evmptr != EVMPTR_INVALID && evmptr != EVMPTR_MAP_PENDING;
+	return NULL;
 }
-
-enum nested_evmptrld_status {
-	EVMPTRLD_DISABLED,
-	EVMPTRLD_SUCCEEDED,
-	EVMPTRLD_VMFAIL,
-	EVMPTRLD_ERROR,
-};
-
-u64 nested_get_evmptr(struct kvm_vcpu *vcpu);
-uint16_t nested_get_evmcs_version(struct kvm_vcpu *vcpu);
-int nested_enable_evmcs(struct kvm_vcpu *vcpu,
-			uint16_t *vmcs_version);
-void nested_evmcs_filter_control_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
-int nested_evmcs_check_controls(struct vmcs12 *vmcs12);
-bool nested_evmcs_l2_tlb_flush_enabled(struct kvm_vcpu *vcpu);
-void vmx_hv_inject_synthetic_vmexit_post_tlb_flush(struct kvm_vcpu *vcpu);
+#endif
 
 #endif /* __KVM_X86_VMX_HYPERV_H */
diff --git a/arch/x86/kvm/vmx/hyperv_evmcs.c b/arch/x86/kvm/vmx/hyperv_evmcs.c
new file mode 100644
index 000000000000..904bfcd1519b
--- /dev/null
+++ b/arch/x86/kvm/vmx/hyperv_evmcs.c
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file contains common code for working with Enlightened VMCS which is
+ * used both by Hyper-V on KVM and KVM on Hyper-V.
+ */
+
+#include "hyperv_evmcs.h"
+
+#define EVMCS1_OFFSET(x) offsetof(struct hv_enlightened_vmcs, x)
+#define EVMCS1_FIELD(number, name, clean_field)[ROL16(number, 6)] = \
+		{EVMCS1_OFFSET(name), clean_field}
+
+const struct evmcs_field vmcs_field_to_evmcs_1[] = {
+	/* 64 bit rw */
+	EVMCS1_FIELD(GUEST_RIP, guest_rip,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
+	EVMCS1_FIELD(GUEST_RSP, guest_rsp,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_BASIC),
+	EVMCS1_FIELD(GUEST_RFLAGS, guest_rflags,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_BASIC),
+	EVMCS1_FIELD(HOST_IA32_PAT, host_ia32_pat,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(HOST_IA32_EFER, host_ia32_efer,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(HOST_IA32_PERF_GLOBAL_CTRL, host_ia32_perf_global_ctrl,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(HOST_CR0, host_cr0,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(HOST_CR3, host_cr3,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(HOST_CR4, host_cr4,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(HOST_IA32_SYSENTER_ESP, host_ia32_sysenter_esp,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(HOST_IA32_SYSENTER_EIP, host_ia32_sysenter_eip,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(HOST_RIP, host_rip,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(IO_BITMAP_A, io_bitmap_a,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_IO_BITMAP),
+	EVMCS1_FIELD(IO_BITMAP_B, io_bitmap_b,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_IO_BITMAP),
+	EVMCS1_FIELD(MSR_BITMAP, msr_bitmap,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_MSR_BITMAP),
+	EVMCS1_FIELD(GUEST_ES_BASE, guest_es_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_CS_BASE, guest_cs_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_SS_BASE, guest_ss_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_DS_BASE, guest_ds_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_FS_BASE, guest_fs_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_GS_BASE, guest_gs_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_LDTR_BASE, guest_ldtr_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_TR_BASE, guest_tr_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_GDTR_BASE, guest_gdtr_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_IDTR_BASE, guest_idtr_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(TSC_OFFSET, tsc_offset,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP2),
+	EVMCS1_FIELD(VIRTUAL_APIC_PAGE_ADDR, virtual_apic_page_addr,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP2),
+	EVMCS1_FIELD(VMCS_LINK_POINTER, vmcs_link_pointer,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	EVMCS1_FIELD(GUEST_IA32_DEBUGCTL, guest_ia32_debugctl,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	EVMCS1_FIELD(GUEST_IA32_PAT, guest_ia32_pat,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	EVMCS1_FIELD(GUEST_IA32_EFER, guest_ia32_efer,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	EVMCS1_FIELD(GUEST_IA32_PERF_GLOBAL_CTRL, guest_ia32_perf_global_ctrl,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	EVMCS1_FIELD(GUEST_PDPTR0, guest_pdptr0,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	EVMCS1_FIELD(GUEST_PDPTR1, guest_pdptr1,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	EVMCS1_FIELD(GUEST_PDPTR2, guest_pdptr2,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	EVMCS1_FIELD(GUEST_PDPTR3, guest_pdptr3,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	EVMCS1_FIELD(GUEST_PENDING_DBG_EXCEPTIONS, guest_pending_dbg_exceptions,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	EVMCS1_FIELD(GUEST_SYSENTER_ESP, guest_sysenter_esp,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	EVMCS1_FIELD(GUEST_SYSENTER_EIP, guest_sysenter_eip,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	EVMCS1_FIELD(CR0_GUEST_HOST_MASK, cr0_guest_host_mask,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
+	EVMCS1_FIELD(CR4_GUEST_HOST_MASK, cr4_guest_host_mask,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
+	EVMCS1_FIELD(CR0_READ_SHADOW, cr0_read_shadow,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
+	EVMCS1_FIELD(CR4_READ_SHADOW, cr4_read_shadow,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
+	EVMCS1_FIELD(GUEST_CR0, guest_cr0,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
+	EVMCS1_FIELD(GUEST_CR3, guest_cr3,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
+	EVMCS1_FIELD(GUEST_CR4, guest_cr4,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
+	EVMCS1_FIELD(GUEST_DR7, guest_dr7,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CRDR),
+	EVMCS1_FIELD(HOST_FS_BASE, host_fs_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_POINTER),
+	EVMCS1_FIELD(HOST_GS_BASE, host_gs_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_POINTER),
+	EVMCS1_FIELD(HOST_TR_BASE, host_tr_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_POINTER),
+	EVMCS1_FIELD(HOST_GDTR_BASE, host_gdtr_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_POINTER),
+	EVMCS1_FIELD(HOST_IDTR_BASE, host_idtr_base,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_POINTER),
+	EVMCS1_FIELD(HOST_RSP, host_rsp,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_POINTER),
+	EVMCS1_FIELD(EPT_POINTER, ept_pointer,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_XLAT),
+	EVMCS1_FIELD(GUEST_BNDCFGS, guest_bndcfgs,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	EVMCS1_FIELD(XSS_EXIT_BITMAP, xss_exit_bitmap,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP2),
+	EVMCS1_FIELD(ENCLS_EXITING_BITMAP, encls_exiting_bitmap,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP2),
+	EVMCS1_FIELD(TSC_MULTIPLIER, tsc_multiplier,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP2),
+	/*
+	 * Not used by KVM:
+	 *
+	 * EVMCS1_FIELD(0x00006828, guest_ia32_s_cet,
+	 *	     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	 * EVMCS1_FIELD(0x0000682A, guest_ssp,
+	 *	     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_BASIC),
+	 * EVMCS1_FIELD(0x0000682C, guest_ia32_int_ssp_table_addr,
+	 *	     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	 * EVMCS1_FIELD(0x00002816, guest_ia32_lbr_ctl,
+	 *	     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	 * EVMCS1_FIELD(0x00006C18, host_ia32_s_cet,
+	 *	     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	 * EVMCS1_FIELD(0x00006C1A, host_ssp,
+	 *	     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	 * EVMCS1_FIELD(0x00006C1C, host_ia32_int_ssp_table_addr,
+	 *	     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	 */
+
+	/* 64 bit read only */
+	EVMCS1_FIELD(GUEST_PHYSICAL_ADDRESS, guest_physical_address,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
+	EVMCS1_FIELD(EXIT_QUALIFICATION, exit_qualification,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
+	/*
+	 * Not defined in KVM:
+	 *
+	 * EVMCS1_FIELD(0x00006402, exit_io_instruction_ecx,
+	 *		HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE);
+	 * EVMCS1_FIELD(0x00006404, exit_io_instruction_esi,
+	 *		HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE);
+	 * EVMCS1_FIELD(0x00006406, exit_io_instruction_esi,
+	 *		HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE);
+	 * EVMCS1_FIELD(0x00006408, exit_io_instruction_eip,
+	 *		HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE);
+	 */
+	EVMCS1_FIELD(GUEST_LINEAR_ADDRESS, guest_linear_address,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
+
+	/*
+	 * No mask defined in the spec as Hyper-V doesn't currently support
+	 * these. Future proof by resetting the whole clean field mask on
+	 * access.
+	 */
+	EVMCS1_FIELD(VM_EXIT_MSR_STORE_ADDR, vm_exit_msr_store_addr,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
+	EVMCS1_FIELD(VM_EXIT_MSR_LOAD_ADDR, vm_exit_msr_load_addr,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
+	EVMCS1_FIELD(VM_ENTRY_MSR_LOAD_ADDR, vm_entry_msr_load_addr,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
+
+	/* 32 bit rw */
+	EVMCS1_FIELD(TPR_THRESHOLD, tpr_threshold,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
+	EVMCS1_FIELD(GUEST_INTERRUPTIBILITY_INFO, guest_interruptibility_info,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_BASIC),
+	EVMCS1_FIELD(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_PROC),
+	EVMCS1_FIELD(EXCEPTION_BITMAP, exception_bitmap,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_EXCPN),
+	EVMCS1_FIELD(VM_ENTRY_CONTROLS, vm_entry_controls,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_ENTRY),
+	EVMCS1_FIELD(VM_ENTRY_INTR_INFO_FIELD, vm_entry_intr_info_field,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_EVENT),
+	EVMCS1_FIELD(VM_ENTRY_EXCEPTION_ERROR_CODE,
+		     vm_entry_exception_error_code,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_EVENT),
+	EVMCS1_FIELD(VM_ENTRY_INSTRUCTION_LEN, vm_entry_instruction_len,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_EVENT),
+	EVMCS1_FIELD(HOST_IA32_SYSENTER_CS, host_ia32_sysenter_cs,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(PIN_BASED_VM_EXEC_CONTROL, pin_based_vm_exec_control,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP1),
+	EVMCS1_FIELD(VM_EXIT_CONTROLS, vm_exit_controls,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP1),
+	EVMCS1_FIELD(SECONDARY_VM_EXEC_CONTROL, secondary_vm_exec_control,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_GRP1),
+	EVMCS1_FIELD(GUEST_ES_LIMIT, guest_es_limit,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_CS_LIMIT, guest_cs_limit,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_SS_LIMIT, guest_ss_limit,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_DS_LIMIT, guest_ds_limit,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_FS_LIMIT, guest_fs_limit,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_GS_LIMIT, guest_gs_limit,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_LDTR_LIMIT, guest_ldtr_limit,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_TR_LIMIT, guest_tr_limit,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_GDTR_LIMIT, guest_gdtr_limit,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_IDTR_LIMIT, guest_idtr_limit,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_ES_AR_BYTES, guest_es_ar_bytes,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_CS_AR_BYTES, guest_cs_ar_bytes,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_SS_AR_BYTES, guest_ss_ar_bytes,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_DS_AR_BYTES, guest_ds_ar_bytes,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_FS_AR_BYTES, guest_fs_ar_bytes,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_GS_AR_BYTES, guest_gs_ar_bytes,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_LDTR_AR_BYTES, guest_ldtr_ar_bytes,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_TR_AR_BYTES, guest_tr_ar_bytes,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_ACTIVITY_STATE, guest_activity_state,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+	EVMCS1_FIELD(GUEST_SYSENTER_CS, guest_sysenter_cs,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1),
+
+	/* 32 bit read only */
+	EVMCS1_FIELD(VM_INSTRUCTION_ERROR, vm_instruction_error,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
+	EVMCS1_FIELD(VM_EXIT_REASON, vm_exit_reason,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
+	EVMCS1_FIELD(VM_EXIT_INTR_INFO, vm_exit_intr_info,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
+	EVMCS1_FIELD(VM_EXIT_INTR_ERROR_CODE, vm_exit_intr_error_code,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
+	EVMCS1_FIELD(IDT_VECTORING_INFO_FIELD, idt_vectoring_info_field,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
+	EVMCS1_FIELD(IDT_VECTORING_ERROR_CODE, idt_vectoring_error_code,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
+	EVMCS1_FIELD(VM_EXIT_INSTRUCTION_LEN, vm_exit_instruction_len,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
+	EVMCS1_FIELD(VMX_INSTRUCTION_INFO, vmx_instruction_info,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE),
+
+	/* No mask defined in the spec (not used) */
+	EVMCS1_FIELD(PAGE_FAULT_ERROR_CODE_MASK, page_fault_error_code_mask,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
+	EVMCS1_FIELD(PAGE_FAULT_ERROR_CODE_MATCH, page_fault_error_code_match,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
+	EVMCS1_FIELD(CR3_TARGET_COUNT, cr3_target_count,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
+	EVMCS1_FIELD(VM_EXIT_MSR_STORE_COUNT, vm_exit_msr_store_count,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
+	EVMCS1_FIELD(VM_EXIT_MSR_LOAD_COUNT, vm_exit_msr_load_count,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
+	EVMCS1_FIELD(VM_ENTRY_MSR_LOAD_COUNT, vm_entry_msr_load_count,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
+
+	/* 16 bit rw */
+	EVMCS1_FIELD(HOST_ES_SELECTOR, host_es_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(HOST_CS_SELECTOR, host_cs_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(HOST_SS_SELECTOR, host_ss_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(HOST_DS_SELECTOR, host_ds_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(HOST_FS_SELECTOR, host_fs_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(HOST_GS_SELECTOR, host_gs_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(HOST_TR_SELECTOR, host_tr_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_HOST_GRP1),
+	EVMCS1_FIELD(GUEST_ES_SELECTOR, guest_es_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_CS_SELECTOR, guest_cs_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_SS_SELECTOR, guest_ss_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_DS_SELECTOR, guest_ds_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_FS_SELECTOR, guest_fs_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_GS_SELECTOR, guest_gs_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_LDTR_SELECTOR, guest_ldtr_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(GUEST_TR_SELECTOR, guest_tr_selector,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2),
+	EVMCS1_FIELD(VIRTUAL_PROCESSOR_ID, virtual_processor_id,
+		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_CONTROL_XLAT),
+};
+const unsigned int nr_evmcs_1_fields = ARRAY_SIZE(vmcs_field_to_evmcs_1);
diff --git a/arch/x86/kvm/vmx/hyperv_evmcs.h b/arch/x86/kvm/vmx/hyperv_evmcs.h
new file mode 100644
index 000000000000..a543fccfc574
--- /dev/null
+++ b/arch/x86/kvm/vmx/hyperv_evmcs.h
@@ -0,0 +1,166 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This file contains common definitions for working with Enlightened VMCS which
+ * are used both by Hyper-V on KVM and KVM on Hyper-V.
+ */
+#ifndef __KVM_X86_VMX_HYPERV_EVMCS_H
+#define __KVM_X86_VMX_HYPERV_EVMCS_H
+
+#include <asm/hyperv-tlfs.h>
+
+#include "capabilities.h"
+#include "vmcs12.h"
+
+#define KVM_EVMCS_VERSION 1
+
+/*
+ * Enlightened VMCSv1 doesn't support these:
+ *
+ *	POSTED_INTR_NV                  = 0x00000002,
+ *	GUEST_INTR_STATUS               = 0x00000810,
+ *	APIC_ACCESS_ADDR		= 0x00002014,
+ *	POSTED_INTR_DESC_ADDR           = 0x00002016,
+ *	EOI_EXIT_BITMAP0                = 0x0000201c,
+ *	EOI_EXIT_BITMAP1                = 0x0000201e,
+ *	EOI_EXIT_BITMAP2                = 0x00002020,
+ *	EOI_EXIT_BITMAP3                = 0x00002022,
+ *	GUEST_PML_INDEX			= 0x00000812,
+ *	PML_ADDRESS			= 0x0000200e,
+ *	VM_FUNCTION_CONTROL             = 0x00002018,
+ *	EPTP_LIST_ADDRESS               = 0x00002024,
+ *	VMREAD_BITMAP                   = 0x00002026,
+ *	VMWRITE_BITMAP                  = 0x00002028,
+ *
+ *	TSC_MULTIPLIER                  = 0x00002032,
+ *	PLE_GAP                         = 0x00004020,
+ *	PLE_WINDOW                      = 0x00004022,
+ *	VMX_PREEMPTION_TIMER_VALUE      = 0x0000482E,
+ *
+ * Currently unsupported in KVM:
+ *	GUEST_IA32_RTIT_CTL		= 0x00002814,
+ */
+#define EVMCS1_SUPPORTED_PINCTRL					\
+	(PIN_BASED_ALWAYSON_WITHOUT_TRUE_MSR |				\
+	 PIN_BASED_EXT_INTR_MASK |					\
+	 PIN_BASED_NMI_EXITING |					\
+	 PIN_BASED_VIRTUAL_NMIS)
+
+#define EVMCS1_SUPPORTED_EXEC_CTRL					\
+	(CPU_BASED_ALWAYSON_WITHOUT_TRUE_MSR |				\
+	 CPU_BASED_HLT_EXITING |					\
+	 CPU_BASED_CR3_LOAD_EXITING |					\
+	 CPU_BASED_CR3_STORE_EXITING |					\
+	 CPU_BASED_UNCOND_IO_EXITING |					\
+	 CPU_BASED_MOV_DR_EXITING |					\
+	 CPU_BASED_USE_TSC_OFFSETTING |					\
+	 CPU_BASED_MWAIT_EXITING |					\
+	 CPU_BASED_MONITOR_EXITING |					\
+	 CPU_BASED_INVLPG_EXITING |					\
+	 CPU_BASED_RDPMC_EXITING |					\
+	 CPU_BASED_INTR_WINDOW_EXITING |				\
+	 CPU_BASED_CR8_LOAD_EXITING |					\
+	 CPU_BASED_CR8_STORE_EXITING |					\
+	 CPU_BASED_RDTSC_EXITING |					\
+	 CPU_BASED_TPR_SHADOW |						\
+	 CPU_BASED_USE_IO_BITMAPS |					\
+	 CPU_BASED_MONITOR_TRAP_FLAG |					\
+	 CPU_BASED_USE_MSR_BITMAPS |					\
+	 CPU_BASED_NMI_WINDOW_EXITING |					\
+	 CPU_BASED_PAUSE_EXITING |					\
+	 CPU_BASED_ACTIVATE_SECONDARY_CONTROLS)
+
+#define EVMCS1_SUPPORTED_2NDEXEC					\
+	(SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE |			\
+	 SECONDARY_EXEC_WBINVD_EXITING |				\
+	 SECONDARY_EXEC_ENABLE_VPID |					\
+	 SECONDARY_EXEC_ENABLE_EPT |					\
+	 SECONDARY_EXEC_UNRESTRICTED_GUEST |				\
+	 SECONDARY_EXEC_DESC |						\
+	 SECONDARY_EXEC_ENABLE_RDTSCP |					\
+	 SECONDARY_EXEC_ENABLE_INVPCID |				\
+	 SECONDARY_EXEC_ENABLE_XSAVES |					\
+	 SECONDARY_EXEC_RDSEED_EXITING |				\
+	 SECONDARY_EXEC_RDRAND_EXITING |				\
+	 SECONDARY_EXEC_TSC_SCALING |					\
+	 SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE |				\
+	 SECONDARY_EXEC_PT_USE_GPA |					\
+	 SECONDARY_EXEC_PT_CONCEAL_VMX |				\
+	 SECONDARY_EXEC_BUS_LOCK_DETECTION |				\
+	 SECONDARY_EXEC_NOTIFY_VM_EXITING |				\
+	 SECONDARY_EXEC_ENCLS_EXITING)
+
+#define EVMCS1_SUPPORTED_3RDEXEC (0ULL)
+
+#define EVMCS1_SUPPORTED_VMEXIT_CTRL					\
+	(VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR |				\
+	 VM_EXIT_SAVE_DEBUG_CONTROLS |					\
+	 VM_EXIT_ACK_INTR_ON_EXIT |					\
+	 VM_EXIT_HOST_ADDR_SPACE_SIZE |					\
+	 VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL |				\
+	 VM_EXIT_SAVE_IA32_PAT |					\
+	 VM_EXIT_LOAD_IA32_PAT |					\
+	 VM_EXIT_SAVE_IA32_EFER |					\
+	 VM_EXIT_LOAD_IA32_EFER |					\
+	 VM_EXIT_CLEAR_BNDCFGS |					\
+	 VM_EXIT_PT_CONCEAL_PIP |					\
+	 VM_EXIT_CLEAR_IA32_RTIT_CTL)
+
+#define EVMCS1_SUPPORTED_VMENTRY_CTRL					\
+	(VM_ENTRY_ALWAYSON_WITHOUT_TRUE_MSR |				\
+	 VM_ENTRY_LOAD_DEBUG_CONTROLS |					\
+	 VM_ENTRY_IA32E_MODE |						\
+	 VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL |				\
+	 VM_ENTRY_LOAD_IA32_PAT |					\
+	 VM_ENTRY_LOAD_IA32_EFER |					\
+	 VM_ENTRY_LOAD_BNDCFGS |					\
+	 VM_ENTRY_PT_CONCEAL_PIP |					\
+	 VM_ENTRY_LOAD_IA32_RTIT_CTL)
+
+#define EVMCS1_SUPPORTED_VMFUNC (0)
+
+struct evmcs_field {
+	u16 offset;
+	u16 clean_field;
+};
+
+extern const struct evmcs_field vmcs_field_to_evmcs_1[];
+extern const unsigned int nr_evmcs_1_fields;
+
+static __always_inline int evmcs_field_offset(unsigned long field,
+					      u16 *clean_field)
+{
+	const struct evmcs_field *evmcs_field;
+	unsigned int index = ROL16(field, 6);
+
+	if (unlikely(index >= nr_evmcs_1_fields))
+		return -ENOENT;
+
+	evmcs_field = &vmcs_field_to_evmcs_1[index];
+
+	/*
+	 * Use offset=0 to detect holes in eVMCS. This offset belongs to
+	 * 'revision_id' but this field has no encoding and is supposed to
+	 * be accessed directly.
+	 */
+	if (unlikely(!evmcs_field->offset))
+		return -ENOENT;
+
+	if (clean_field)
+		*clean_field = evmcs_field->clean_field;
+
+	return evmcs_field->offset;
+}
+
+static inline u64 evmcs_read_any(struct hv_enlightened_vmcs *evmcs,
+				 unsigned long field, u16 offset)
+{
+	/*
+	 * vmcs12_read_any() doesn't care whether the supplied structure
+	 * is 'struct vmcs12' or 'struct hv_enlightened_vmcs' as it takes
+	 * the exact offset of the required field, use it for convenience
+	 * here.
+	 */
+	return vmcs12_read_any((void *)evmcs, field, offset);
+}
+
+#endif /* __KVM_X86_VMX_HYPERV_H */
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index c5ec0ef51ff7..6329a306856b 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -179,7 +179,7 @@ static int nested_vmx_failValid(struct kvm_vcpu *vcpu,
 	 * VM_INSTRUCTION_ERROR is not shadowed. Enlightened VMCS 'shadows' all
 	 * fields and thus must be synced.
 	 */
-	if (to_vmx(vcpu)->nested.hv_evmcs_vmptr != EVMPTR_INVALID)
+	if (nested_vmx_is_evmptr12_set(to_vmx(vcpu)))
 		to_vmx(vcpu)->nested.need_vmcs12_to_shadow_sync = true;
 
 	return kvm_skip_emulated_instruction(vcpu);
@@ -194,7 +194,7 @@ static int nested_vmx_fail(struct kvm_vcpu *vcpu, u32 vm_instruction_error)
 	 * can't be done if there isn't a current VMCS.
 	 */
 	if (vmx->nested.current_vmptr == INVALID_GPA &&
-	    !evmptr_is_valid(vmx->nested.hv_evmcs_vmptr))
+	    !nested_vmx_is_evmptr12_valid(vmx))
 		return nested_vmx_failInvalid(vcpu);
 
 	return nested_vmx_failValid(vcpu, vm_instruction_error);
@@ -226,10 +226,11 @@ static void vmx_disable_shadow_vmcs(struct vcpu_vmx *vmx)
 
 static inline void nested_release_evmcs(struct kvm_vcpu *vcpu)
 {
+#ifdef CONFIG_KVM_HYPERV
 	struct kvm_vcpu_hv *hv_vcpu = to_hv_vcpu(vcpu);
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
-	if (evmptr_is_valid(vmx->nested.hv_evmcs_vmptr)) {
+	if (nested_vmx_is_evmptr12_valid(vmx)) {
 		kvm_vcpu_unmap(vcpu, &vmx->nested.hv_evmcs_map, true);
 		vmx->nested.hv_evmcs = NULL;
 	}
@@ -241,6 +242,34 @@ static inline void nested_release_evmcs(struct kvm_vcpu *vcpu)
 		hv_vcpu->nested.vm_id = 0;
 		hv_vcpu->nested.vp_id = 0;
 	}
+#endif
+}
+
+static bool nested_evmcs_handle_vmclear(struct kvm_vcpu *vcpu, gpa_t vmptr)
+{
+#ifdef CONFIG_KVM_HYPERV
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	/*
+	 * When Enlightened VMEntry is enabled on the calling CPU we treat
+	 * memory area pointer by vmptr as Enlightened VMCS (as there's no good
+	 * way to distinguish it from VMCS12) and we must not corrupt it by
+	 * writing to the non-existent 'launch_state' field. The area doesn't
+	 * have to be the currently active EVMCS on the calling CPU and there's
+	 * nothing KVM has to do to transition it from 'active' to 'non-active'
+	 * state. It is possible that the area will stay mapped as
+	 * vmx->nested.hv_evmcs but this shouldn't be a problem.
+	 */
+	if (!guest_cpuid_has_evmcs(vcpu) ||
+	    !evmptr_is_valid(nested_get_evmptr(vcpu)))
+		return false;
+
+	if (nested_vmx_evmcs(vmx) && vmptr == vmx->nested.hv_evmcs_vmptr)
+		nested_release_evmcs(vcpu);
+
+	return true;
+#else
+	return false;
+#endif
 }
 
 static void vmx_sync_vmcs_host_state(struct vcpu_vmx *vmx,
@@ -572,7 +601,6 @@ static inline bool nested_vmx_prepare_msr_bitmap(struct kvm_vcpu *vcpu,
 	int msr;
 	unsigned long *msr_bitmap_l1;
 	unsigned long *msr_bitmap_l0 = vmx->nested.vmcs02.msr_bitmap;
-	struct hv_enlightened_vmcs *evmcs = vmx->nested.hv_evmcs;
 	struct kvm_host_map *map = &vmx->nested.msr_bitmap_map;
 
 	/* Nothing to do if the MSR bitmap is not in use.  */
@@ -588,10 +616,13 @@ static inline bool nested_vmx_prepare_msr_bitmap(struct kvm_vcpu *vcpu,
 	 * - Nested hypervisor (L1) has enabled 'Enlightened MSR Bitmap' feature
 	 *   and tells KVM (L0) there were no changes in MSR bitmap for L2.
 	 */
-	if (!vmx->nested.force_msr_bitmap_recalc && evmcs &&
-	    evmcs->hv_enlightenments_control.msr_bitmap &&
-	    evmcs->hv_clean_fields & HV_VMX_ENLIGHTENED_CLEAN_FIELD_MSR_BITMAP)
-		return true;
+	if (!vmx->nested.force_msr_bitmap_recalc) {
+		struct hv_enlightened_vmcs *evmcs = nested_vmx_evmcs(vmx);
+
+		if (evmcs && evmcs->hv_enlightenments_control.msr_bitmap &&
+		    evmcs->hv_clean_fields & HV_VMX_ENLIGHTENED_CLEAN_FIELD_MSR_BITMAP)
+			return true;
+	}
 
 	if (kvm_vcpu_map(vcpu, gpa_to_gfn(vmcs12->msr_bitmap), map))
 		return false;
@@ -1085,7 +1116,7 @@ static int nested_vmx_load_cr3(struct kvm_vcpu *vcpu, unsigned long cr3,
 			       bool nested_ept, bool reload_pdptrs,
 			       enum vm_entry_failure_code *entry_failure_code)
 {
-	if (CC(kvm_vcpu_is_illegal_gpa(vcpu, cr3))) {
+	if (CC(!kvm_vcpu_is_legal_cr3(vcpu, cr3))) {
 		*entry_failure_code = ENTRY_FAIL_DEFAULT;
 		return -EINVAL;
 	}
@@ -1139,14 +1170,8 @@ static void nested_vmx_transition_tlb_flush(struct kvm_vcpu *vcpu,
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
-	/*
-	 * KVM_REQ_HV_TLB_FLUSH flushes entries from either L1's VP_ID or
-	 * L2's VP_ID upon request from the guest. Make sure we check for
-	 * pending entries in the right FIFO upon L1/L2 transition as these
-	 * requests are put by other vCPUs asynchronously.
-	 */
-	if (to_hv_vcpu(vcpu) && enable_ept)
-		kvm_make_request(KVM_REQ_HV_TLB_FLUSH, vcpu);
+	/* Handle pending Hyper-V TLB flush requests */
+	kvm_hv_nested_transtion_tlb_flush(vcpu, enable_ept);
 
 	/*
 	 * If vmcs12 doesn't use VPID, L1 expects linear and combined mappings
@@ -1578,8 +1603,9 @@ static void copy_vmcs12_to_shadow(struct vcpu_vmx *vmx)
 
 static void copy_enlightened_to_vmcs12(struct vcpu_vmx *vmx, u32 hv_clean_fields)
 {
+#ifdef CONFIG_KVM_HYPERV
 	struct vmcs12 *vmcs12 = vmx->nested.cached_vmcs12;
-	struct hv_enlightened_vmcs *evmcs = vmx->nested.hv_evmcs;
+	struct hv_enlightened_vmcs *evmcs = nested_vmx_evmcs(vmx);
 	struct kvm_vcpu_hv *hv_vcpu = to_hv_vcpu(&vmx->vcpu);
 
 	/* HV_VMX_ENLIGHTENED_CLEAN_FIELD_NONE */
@@ -1818,12 +1844,16 @@ static void copy_enlightened_to_vmcs12(struct vcpu_vmx *vmx, u32 hv_clean_fields
 	 */
 
 	return;
+#else /* CONFIG_KVM_HYPERV */
+	KVM_BUG_ON(1, vmx->vcpu.kvm);
+#endif /* CONFIG_KVM_HYPERV */
 }
 
 static void copy_vmcs12_to_enlightened(struct vcpu_vmx *vmx)
 {
+#ifdef CONFIG_KVM_HYPERV
 	struct vmcs12 *vmcs12 = vmx->nested.cached_vmcs12;
-	struct hv_enlightened_vmcs *evmcs = vmx->nested.hv_evmcs;
+	struct hv_enlightened_vmcs *evmcs = nested_vmx_evmcs(vmx);
 
 	/*
 	 * Should not be changed by KVM:
@@ -1992,6 +2022,9 @@ static void copy_vmcs12_to_enlightened(struct vcpu_vmx *vmx)
 	evmcs->guest_bndcfgs = vmcs12->guest_bndcfgs;
 
 	return;
+#else /* CONFIG_KVM_HYPERV */
+	KVM_BUG_ON(1, vmx->vcpu.kvm);
+#endif /* CONFIG_KVM_HYPERV */
 }
 
 /*
@@ -2001,6 +2034,7 @@ static void copy_vmcs12_to_enlightened(struct vcpu_vmx *vmx)
 static enum nested_evmptrld_status nested_vmx_handle_enlightened_vmptrld(
 	struct kvm_vcpu *vcpu, bool from_launch)
 {
+#ifdef CONFIG_KVM_HYPERV
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	bool evmcs_gpa_changed = false;
 	u64 evmcs_gpa;
@@ -2082,13 +2116,16 @@ static enum nested_evmptrld_status nested_vmx_handle_enlightened_vmptrld(
 	}
 
 	return EVMPTRLD_SUCCEEDED;
+#else
+	return EVMPTRLD_DISABLED;
+#endif
 }
 
 void nested_sync_vmcs12_to_shadow(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
-	if (evmptr_is_valid(vmx->nested.hv_evmcs_vmptr))
+	if (nested_vmx_is_evmptr12_valid(vmx))
 		copy_vmcs12_to_enlightened(vmx);
 	else
 		copy_vmcs12_to_shadow(vmx);
@@ -2242,7 +2279,7 @@ static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct loaded_vmcs *vmcs0
 	u32 exec_control;
 	u64 guest_efer = nested_vmx_calc_efer(vmx, vmcs12);
 
-	if (vmx->nested.dirty_vmcs12 || evmptr_is_valid(vmx->nested.hv_evmcs_vmptr))
+	if (vmx->nested.dirty_vmcs12 || nested_vmx_is_evmptr12_valid(vmx))
 		prepare_vmcs02_early_rare(vmx, vmcs12);
 
 	/*
@@ -2403,7 +2440,7 @@ static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct loaded_vmcs *vmcs0
 
 static void prepare_vmcs02_rare(struct vcpu_vmx *vmx, struct vmcs12 *vmcs12)
 {
-	struct hv_enlightened_vmcs *hv_evmcs = vmx->nested.hv_evmcs;
+	struct hv_enlightened_vmcs *hv_evmcs = nested_vmx_evmcs(vmx);
 
 	if (!hv_evmcs || !(hv_evmcs->hv_clean_fields &
 			   HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP2)) {
@@ -2535,15 +2572,15 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 			  enum vm_entry_failure_code *entry_failure_code)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	struct hv_enlightened_vmcs *evmcs = nested_vmx_evmcs(vmx);
 	bool load_guest_pdptrs_vmcs12 = false;
 
-	if (vmx->nested.dirty_vmcs12 || evmptr_is_valid(vmx->nested.hv_evmcs_vmptr)) {
+	if (vmx->nested.dirty_vmcs12 || nested_vmx_is_evmptr12_valid(vmx)) {
 		prepare_vmcs02_rare(vmx, vmcs12);
 		vmx->nested.dirty_vmcs12 = false;
 
-		load_guest_pdptrs_vmcs12 = !evmptr_is_valid(vmx->nested.hv_evmcs_vmptr) ||
-			!(vmx->nested.hv_evmcs->hv_clean_fields &
-			  HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1);
+		load_guest_pdptrs_vmcs12 = !nested_vmx_is_evmptr12_valid(vmx) ||
+			!(evmcs->hv_clean_fields & HV_VMX_ENLIGHTENED_CLEAN_FIELD_GUEST_GRP1);
 	}
 
 	if (vmx->nested.nested_run_pending &&
@@ -2664,9 +2701,8 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 	 * bits when it changes a field in eVMCS. Mark all fields as clean
 	 * here.
 	 */
-	if (evmptr_is_valid(vmx->nested.hv_evmcs_vmptr))
-		vmx->nested.hv_evmcs->hv_clean_fields |=
-			HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL;
+	if (nested_vmx_is_evmptr12_valid(vmx))
+		evmcs->hv_clean_fields |= HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL;
 
 	return 0;
 }
@@ -2717,7 +2753,7 @@ static bool nested_vmx_check_eptp(struct kvm_vcpu *vcpu, u64 new_eptp)
 	}
 
 	/* Reserved bits should not be set */
-	if (CC(kvm_vcpu_is_illegal_gpa(vcpu, new_eptp) || ((new_eptp >> 7) & 0x1f)))
+	if (CC(!kvm_vcpu_is_legal_gpa(vcpu, new_eptp) || ((new_eptp >> 7) & 0x1f)))
 		return false;
 
 	/* AD, if set, should be supported */
@@ -2888,8 +2924,10 @@ static int nested_vmx_check_controls(struct kvm_vcpu *vcpu,
 	    nested_check_vm_entry_controls(vcpu, vmcs12))
 		return -EINVAL;
 
+#ifdef CONFIG_KVM_HYPERV
 	if (guest_cpuid_has_evmcs(vcpu))
 		return nested_evmcs_check_controls(vmcs12);
+#endif
 
 	return 0;
 }
@@ -2912,7 +2950,7 @@ static int nested_vmx_check_host_state(struct kvm_vcpu *vcpu,
 
 	if (CC(!nested_host_cr0_valid(vcpu, vmcs12->host_cr0)) ||
 	    CC(!nested_host_cr4_valid(vcpu, vmcs12->host_cr4)) ||
-	    CC(kvm_vcpu_is_illegal_gpa(vcpu, vmcs12->host_cr3)))
+	    CC(!kvm_vcpu_is_legal_cr3(vcpu, vmcs12->host_cr3)))
 		return -EINVAL;
 
 	if (CC(is_noncanonical_address(vmcs12->host_ia32_sysenter_esp, vcpu)) ||
@@ -3161,6 +3199,7 @@ static int nested_vmx_check_vmentry_hw(struct kvm_vcpu *vcpu)
 	return 0;
 }
 
+#ifdef CONFIG_KVM_HYPERV
 static bool nested_get_evmcs_page(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -3188,6 +3227,7 @@ static bool nested_get_evmcs_page(struct kvm_vcpu *vcpu)
 
 	return true;
 }
+#endif
 
 static bool nested_get_vmcs12_pages(struct kvm_vcpu *vcpu)
 {
@@ -3279,6 +3319,7 @@ static bool nested_get_vmcs12_pages(struct kvm_vcpu *vcpu)
 
 static bool vmx_get_nested_state_pages(struct kvm_vcpu *vcpu)
 {
+#ifdef CONFIG_KVM_HYPERV
 	/*
 	 * Note: nested_get_evmcs_page() also updates 'vp_assist_page' copy
 	 * in 'struct kvm_vcpu_hv' in case eVMCS is in use, this is mandatory
@@ -3295,6 +3336,7 @@ static bool vmx_get_nested_state_pages(struct kvm_vcpu *vcpu)
 
 		return false;
 	}
+#endif
 
 	if (is_guest_mode(vcpu) && !nested_get_vmcs12_pages(vcpu))
 		return false;
@@ -3538,7 +3580,7 @@ vmentry_fail_vmexit:
 
 	load_vmcs12_host_state(vcpu, vmcs12);
 	vmcs12->vm_exit_reason = exit_reason.full;
-	if (enable_shadow_vmcs || evmptr_is_valid(vmx->nested.hv_evmcs_vmptr))
+	if (enable_shadow_vmcs || nested_vmx_is_evmptr12_valid(vmx))
 		vmx->nested.need_vmcs12_to_shadow_sync = true;
 	return NVMX_VMENTRY_VMEXIT;
 }
@@ -3569,7 +3611,7 @@ static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch)
 	if (CC(evmptrld_status == EVMPTRLD_VMFAIL))
 		return nested_vmx_failInvalid(vcpu);
 
-	if (CC(!evmptr_is_valid(vmx->nested.hv_evmcs_vmptr) &&
+	if (CC(!nested_vmx_is_evmptr12_valid(vmx) &&
 	       vmx->nested.current_vmptr == INVALID_GPA))
 		return nested_vmx_failInvalid(vcpu);
 
@@ -3584,8 +3626,10 @@ static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch)
 	if (CC(vmcs12->hdr.shadow_vmcs))
 		return nested_vmx_failInvalid(vcpu);
 
-	if (evmptr_is_valid(vmx->nested.hv_evmcs_vmptr)) {
-		copy_enlightened_to_vmcs12(vmx, vmx->nested.hv_evmcs->hv_clean_fields);
+	if (nested_vmx_is_evmptr12_valid(vmx)) {
+		struct hv_enlightened_vmcs *evmcs = nested_vmx_evmcs(vmx);
+
+		copy_enlightened_to_vmcs12(vmx, evmcs->hv_clean_fields);
 		/* Enlightened VMCS doesn't have launch state */
 		vmcs12->launch_state = !launch;
 	} else if (enable_shadow_vmcs) {
@@ -4329,11 +4373,11 @@ static void sync_vmcs02_to_vmcs12(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
-	if (evmptr_is_valid(vmx->nested.hv_evmcs_vmptr))
+	if (nested_vmx_is_evmptr12_valid(vmx))
 		sync_vmcs02_to_vmcs12_rare(vcpu, vmcs12);
 
 	vmx->nested.need_sync_vmcs02_to_vmcs12_rare =
-		!evmptr_is_valid(vmx->nested.hv_evmcs_vmptr);
+		!nested_vmx_is_evmptr12_valid(vmx);
 
 	vmcs12->guest_cr0 = vmcs12_guest_cr0(vcpu, vmcs12);
 	vmcs12->guest_cr4 = vmcs12_guest_cr4(vcpu, vmcs12);
@@ -4732,6 +4776,7 @@ void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 vm_exit_reason,
 	/* trying to cancel vmlaunch/vmresume is a bug */
 	WARN_ON_ONCE(vmx->nested.nested_run_pending);
 
+#ifdef CONFIG_KVM_HYPERV
 	if (kvm_check_request(KVM_REQ_GET_NESTED_STATE_PAGES, vcpu)) {
 		/*
 		 * KVM_REQ_GET_NESTED_STATE_PAGES is also used to map
@@ -4741,6 +4786,7 @@ void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 vm_exit_reason,
 		 */
 		(void)nested_get_evmcs_page(vcpu);
 	}
+#endif
 
 	/* Service pending TLB flush requests for L2 before switching to L1. */
 	kvm_service_local_tlb_flush_requests(vcpu);
@@ -4854,7 +4900,7 @@ void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 vm_exit_reason,
 	}
 
 	if ((vm_exit_reason != -1) &&
-	    (enable_shadow_vmcs || evmptr_is_valid(vmx->nested.hv_evmcs_vmptr)))
+	    (enable_shadow_vmcs || nested_vmx_is_evmptr12_valid(vmx)))
 		vmx->nested.need_vmcs12_to_shadow_sync = true;
 
 	/* in case we halted in L2 */
@@ -4980,6 +5026,7 @@ int get_vmx_mem_address(struct kvm_vcpu *vcpu, unsigned long exit_qualification,
 		else
 			*ret = off;
 
+		*ret = vmx_get_untagged_addr(vcpu, *ret, 0);
 		/* Long mode: #GP(0)/#SS(0) if the memory address is in a
 		 * non-canonical form. This is the only check on the memory
 		 * destination for long mode!
@@ -5292,18 +5339,7 @@ static int handle_vmclear(struct kvm_vcpu *vcpu)
 	if (vmptr == vmx->nested.vmxon_ptr)
 		return nested_vmx_fail(vcpu, VMXERR_VMCLEAR_VMXON_POINTER);
 
-	/*
-	 * When Enlightened VMEntry is enabled on the calling CPU we treat
-	 * memory area pointer by vmptr as Enlightened VMCS (as there's no good
-	 * way to distinguish it from VMCS12) and we must not corrupt it by
-	 * writing to the non-existent 'launch_state' field. The area doesn't
-	 * have to be the currently active EVMCS on the calling CPU and there's
-	 * nothing KVM has to do to transition it from 'active' to 'non-active'
-	 * state. It is possible that the area will stay mapped as
-	 * vmx->nested.hv_evmcs but this shouldn't be a problem.
-	 */
-	if (likely(!guest_cpuid_has_evmcs(vcpu) ||
-		   !evmptr_is_valid(nested_get_evmptr(vcpu)))) {
+	if (likely(!nested_evmcs_handle_vmclear(vcpu, vmptr))) {
 		if (vmptr == vmx->nested.current_vmptr)
 			nested_release_vmcs12(vcpu);
 
@@ -5320,8 +5356,6 @@ static int handle_vmclear(struct kvm_vcpu *vcpu)
 					   vmptr + offsetof(struct vmcs12,
 							    launch_state),
 					   &zero, sizeof(zero));
-	} else if (vmx->nested.hv_evmcs && vmptr == vmx->nested.hv_evmcs_vmptr) {
-		nested_release_evmcs(vcpu);
 	}
 
 	return nested_vmx_succeed(vcpu);
@@ -5360,7 +5394,7 @@ static int handle_vmread(struct kvm_vcpu *vcpu)
 	/* Decode instruction info and find the field to read */
 	field = kvm_register_read(vcpu, (((instr_info) >> 28) & 0xf));
 
-	if (!evmptr_is_valid(vmx->nested.hv_evmcs_vmptr)) {
+	if (!nested_vmx_is_evmptr12_valid(vmx)) {
 		/*
 		 * In VMX non-root operation, when the VMCS-link pointer is INVALID_GPA,
 		 * any VMREAD sets the ALU flags for VMfailInvalid.
@@ -5398,7 +5432,7 @@ static int handle_vmread(struct kvm_vcpu *vcpu)
 			return nested_vmx_fail(vcpu, VMXERR_UNSUPPORTED_VMCS_COMPONENT);
 
 		/* Read the field, zero-extended to a u64 value */
-		value = evmcs_read_any(vmx->nested.hv_evmcs, field, offset);
+		value = evmcs_read_any(nested_vmx_evmcs(vmx), field, offset);
 	}
 
 	/*
@@ -5586,7 +5620,7 @@ static int handle_vmptrld(struct kvm_vcpu *vcpu)
 		return nested_vmx_fail(vcpu, VMXERR_VMPTRLD_VMXON_POINTER);
 
 	/* Forbid normal VMPTRLD if Enlightened version was used */
-	if (evmptr_is_valid(vmx->nested.hv_evmcs_vmptr))
+	if (nested_vmx_is_evmptr12_valid(vmx))
 		return 1;
 
 	if (vmx->nested.current_vmptr != vmptr) {
@@ -5649,7 +5683,7 @@ static int handle_vmptrst(struct kvm_vcpu *vcpu)
 	if (!nested_vmx_check_permission(vcpu))
 		return 1;
 
-	if (unlikely(evmptr_is_valid(to_vmx(vcpu)->nested.hv_evmcs_vmptr)))
+	if (unlikely(nested_vmx_is_evmptr12_valid(to_vmx(vcpu))))
 		return 1;
 
 	if (get_vmx_mem_address(vcpu, exit_qual, instr_info,
@@ -5797,6 +5831,10 @@ static int handle_invvpid(struct kvm_vcpu *vcpu)
 	vpid02 = nested_get_vpid02(vcpu);
 	switch (type) {
 	case VMX_VPID_EXTENT_INDIVIDUAL_ADDR:
+		/*
+		 * LAM doesn't apply to addresses that are inputs to TLB
+		 * invalidation.
+		 */
 		if (!operand.vpid ||
 		    is_noncanonical_address(operand.gla, vcpu))
 			return nested_vmx_fail(vcpu,
@@ -6208,11 +6246,13 @@ static bool nested_vmx_l0_wants_exit(struct kvm_vcpu *vcpu,
 		 * Handle L2's bus locks in L0 directly.
 		 */
 		return true;
+#ifdef CONFIG_KVM_HYPERV
 	case EXIT_REASON_VMCALL:
 		/* Hyper-V L2 TLB flush hypercall is handled by L0 */
 		return guest_hv_cpuid_has_l2_tlb_flush(vcpu) &&
 			nested_evmcs_l2_tlb_flush_enabled(vcpu) &&
 			kvm_hv_is_tlb_flush_hcall(vcpu);
+#endif
 	default:
 		break;
 	}
@@ -6435,7 +6475,7 @@ static int vmx_get_nested_state(struct kvm_vcpu *vcpu,
 			kvm_state.size += sizeof(user_vmx_nested_state->vmcs12);
 
 			/* 'hv_evmcs_vmptr' can also be EVMPTR_MAP_PENDING here */
-			if (vmx->nested.hv_evmcs_vmptr != EVMPTR_INVALID)
+			if (nested_vmx_is_evmptr12_set(vmx))
 				kvm_state.flags |= KVM_STATE_NESTED_EVMCS;
 
 			if (is_guest_mode(vcpu) &&
@@ -6491,7 +6531,7 @@ static int vmx_get_nested_state(struct kvm_vcpu *vcpu,
 	} else  {
 		copy_vmcs02_to_vmcs12_rare(vcpu, get_vmcs12(vcpu));
 		if (!vmx->nested.need_vmcs12_to_shadow_sync) {
-			if (evmptr_is_valid(vmx->nested.hv_evmcs_vmptr))
+			if (nested_vmx_is_evmptr12_valid(vmx))
 				/*
 				 * L1 hypervisor is not obliged to keep eVMCS
 				 * clean fields data always up-to-date while
@@ -6561,7 +6601,7 @@ static int vmx_set_nested_state(struct kvm_vcpu *vcpu,
 		 * code was changed such that flag signals vmcs12 should
 		 * be copied into eVMCS in guest memory.
 		 *
-		 * To preserve backwards compatability, allow user
+		 * To preserve backwards compatibility, allow user
 		 * to set this flag even when there is no VMXON region.
 		 */
 		if (kvm_state->flags & ~KVM_STATE_NESTED_EVMCS)
@@ -6632,6 +6672,7 @@ static int vmx_set_nested_state(struct kvm_vcpu *vcpu,
 			return -EINVAL;
 
 		set_current_vmptr(vmx, kvm_state->hdr.vmx.vmcs12_pa);
+#ifdef CONFIG_KVM_HYPERV
 	} else if (kvm_state->flags & KVM_STATE_NESTED_EVMCS) {
 		/*
 		 * nested_vmx_handle_enlightened_vmptrld() cannot be called
@@ -6641,6 +6682,7 @@ static int vmx_set_nested_state(struct kvm_vcpu *vcpu,
 		 */
 		vmx->nested.hv_evmcs_vmptr = EVMPTR_MAP_PENDING;
 		kvm_make_request(KVM_REQ_GET_NESTED_STATE_PAGES, vcpu);
+#endif
 	} else {
 		return -EINVAL;
 	}
@@ -7096,7 +7138,9 @@ struct kvm_x86_nested_ops vmx_nested_ops = {
 	.set_state = vmx_set_nested_state,
 	.get_nested_state_pages = vmx_get_nested_state_pages,
 	.write_log_dirty = nested_vmx_write_pml_buffer,
+#ifdef CONFIG_KVM_HYPERV
 	.enable_evmcs = nested_enable_evmcs,
 	.get_evmcs_version = nested_get_evmcs_version,
 	.hv_inject_synthetic_vmexit_post_tlb_flush = vmx_hv_inject_synthetic_vmexit_post_tlb_flush,
+#endif
 };
diff --git a/arch/x86/kvm/vmx/nested.h b/arch/x86/kvm/vmx/nested.h
index b4b9d51438c6..cce4e2aa30fb 100644
--- a/arch/x86/kvm/vmx/nested.h
+++ b/arch/x86/kvm/vmx/nested.h
@@ -3,6 +3,7 @@
 #define __KVM_X86_VMX_NESTED_H
 
 #include "kvm_cache_regs.h"
+#include "hyperv.h"
 #include "vmcs12.h"
 #include "vmx.h"
 
@@ -57,7 +58,7 @@ static inline int vmx_has_valid_vmcs12(struct kvm_vcpu *vcpu)
 
 	/* 'hv_evmcs_vmptr' can also be EVMPTR_MAP_PENDING here */
 	return vmx->nested.current_vmptr != -1ull ||
-		vmx->nested.hv_evmcs_vmptr != EVMPTR_INVALID;
+		nested_vmx_is_evmptr12_set(vmx);
 }
 
 static inline u16 nested_get_vpid02(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/vmx/pmu_intel.c b/arch/x86/kvm/vmx/pmu_intel.c
index 820d3e1f6b4f..315c7c2ba89b 100644
--- a/arch/x86/kvm/vmx/pmu_intel.c
+++ b/arch/x86/kvm/vmx/pmu_intel.c
@@ -71,7 +71,7 @@ static int fixed_pmc_events[] = {
 static void reprogram_fixed_counters(struct kvm_pmu *pmu, u64 data)
 {
 	struct kvm_pmc *pmc;
-	u8 old_fixed_ctr_ctrl = pmu->fixed_ctr_ctrl;
+	u64 old_fixed_ctr_ctrl = pmu->fixed_ctr_ctrl;
 	int i;
 
 	pmu->fixed_ctr_ctrl = data;
@@ -437,11 +437,9 @@ static int intel_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 			    !(msr & MSR_PMC_FULL_WIDTH_BIT))
 				data = (s64)(s32)data;
 			pmc_write_counter(pmc, data);
-			pmc_update_sample_period(pmc);
 			break;
 		} else if ((pmc = get_fixed_pmc(pmu, msr))) {
 			pmc_write_counter(pmc, data);
-			pmc_update_sample_period(pmc);
 			break;
 		} else if ((pmc = get_gp_pmc(pmu, msr, MSR_P6_EVNTSEL0))) {
 			reserved_bits = pmu->reserved_bits;
@@ -632,26 +630,6 @@ static void intel_pmu_init(struct kvm_vcpu *vcpu)
 
 static void intel_pmu_reset(struct kvm_vcpu *vcpu)
 {
-	struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
-	struct kvm_pmc *pmc = NULL;
-	int i;
-
-	for (i = 0; i < KVM_INTEL_PMC_MAX_GENERIC; i++) {
-		pmc = &pmu->gp_counters[i];
-
-		pmc_stop_counter(pmc);
-		pmc->counter = pmc->prev_counter = pmc->eventsel = 0;
-	}
-
-	for (i = 0; i < KVM_PMC_MAX_FIXED; i++) {
-		pmc = &pmu->fixed_counters[i];
-
-		pmc_stop_counter(pmc);
-		pmc->counter = pmc->prev_counter = 0;
-	}
-
-	pmu->fixed_ctr_ctrl = pmu->global_ctrl = pmu->global_status = 0;
-
 	intel_pmu_release_guest_lbr_event(vcpu);
 }
 
diff --git a/arch/x86/kvm/vmx/run_flags.h b/arch/x86/kvm/vmx/run_flags.h
index edc3f16cc189..6a9bfdfbb6e5 100644
--- a/arch/x86/kvm/vmx/run_flags.h
+++ b/arch/x86/kvm/vmx/run_flags.h
@@ -2,7 +2,10 @@
 #ifndef __KVM_X86_VMX_RUN_FLAGS_H
 #define __KVM_X86_VMX_RUN_FLAGS_H
 
-#define VMX_RUN_VMRESUME	(1 << 0)
-#define VMX_RUN_SAVE_SPEC_CTRL	(1 << 1)
+#define VMX_RUN_VMRESUME_SHIFT		0
+#define VMX_RUN_SAVE_SPEC_CTRL_SHIFT	1
+
+#define VMX_RUN_VMRESUME		BIT(VMX_RUN_VMRESUME_SHIFT)
+#define VMX_RUN_SAVE_SPEC_CTRL		BIT(VMX_RUN_SAVE_SPEC_CTRL_SHIFT)
 
 #endif /* __KVM_X86_VMX_RUN_FLAGS_H */
diff --git a/arch/x86/kvm/vmx/sgx.c b/arch/x86/kvm/vmx/sgx.c
index 3e822e582497..6fef01e0536e 100644
--- a/arch/x86/kvm/vmx/sgx.c
+++ b/arch/x86/kvm/vmx/sgx.c
@@ -37,6 +37,7 @@ static int sgx_get_encls_gva(struct kvm_vcpu *vcpu, unsigned long offset,
 	if (!IS_ALIGNED(*gva, alignment)) {
 		fault = true;
 	} else if (likely(is_64_bit_mode(vcpu))) {
+		*gva = vmx_get_untagged_addr(vcpu, *gva, 0);
 		fault = is_noncanonical_address(*gva, vcpu);
 	} else {
 		*gva &= 0xffffffff;
diff --git a/arch/x86/kvm/vmx/vmenter.S b/arch/x86/kvm/vmx/vmenter.S
index be275a0410a8..2bfbf758d061 100644
--- a/arch/x86/kvm/vmx/vmenter.S
+++ b/arch/x86/kvm/vmx/vmenter.S
@@ -139,7 +139,7 @@ SYM_FUNC_START(__vmx_vcpu_run)
 	mov (%_ASM_SP), %_ASM_AX
 
 	/* Check if vmlaunch or vmresume is needed */
-	test $VMX_RUN_VMRESUME, %ebx
+	bt   $VMX_RUN_VMRESUME_SHIFT, %ebx
 
 	/* Load guest registers.  Don't clobber flags. */
 	mov VCPU_RCX(%_ASM_AX), %_ASM_CX
@@ -161,8 +161,11 @@ SYM_FUNC_START(__vmx_vcpu_run)
 	/* Load guest RAX.  This kills the @regs pointer! */
 	mov VCPU_RAX(%_ASM_AX), %_ASM_AX
 
-	/* Check EFLAGS.ZF from 'test VMX_RUN_VMRESUME' above */
-	jz .Lvmlaunch
+	/* Clobbers EFLAGS.ZF */
+	CLEAR_CPU_BUFFERS
+
+	/* Check EFLAGS.CF from the VMX_RUN_VMRESUME bit test above. */
+	jnc .Lvmlaunch
 
 	/*
 	 * After a successful VMRESUME/VMLAUNCH, control flow "magically"
@@ -289,7 +292,7 @@ SYM_INNER_LABEL_ALIGN(vmx_vmexit, SYM_L_GLOBAL)
 	RET
 
 .Lfixup:
-	cmpb $0, kvm_rebooting
+	cmpb $0, _ASM_RIP(kvm_rebooting)
 	jne .Lvmfail
 	ud2
 .Lvmfail:
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index be20a60047b1..88a4ff200d04 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -66,6 +66,7 @@
 #include "vmx.h"
 #include "x86.h"
 #include "smm.h"
+#include "vmx_onhyperv.h"
 
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
@@ -387,7 +388,16 @@ static __always_inline void vmx_enable_fb_clear(struct vcpu_vmx *vmx)
 
 static void vmx_update_fb_clear_dis(struct kvm_vcpu *vcpu, struct vcpu_vmx *vmx)
 {
-	vmx->disable_fb_clear = (host_arch_capabilities & ARCH_CAP_FB_CLEAR_CTRL) &&
+	/*
+	 * Disable VERW's behavior of clearing CPU buffers for the guest if the
+	 * CPU isn't affected by MDS/TAA, and the host hasn't forcefully enabled
+	 * the mitigation. Disabling the clearing behavior provides a
+	 * performance boost for guests that aren't aware that manually clearing
+	 * CPU buffers is unnecessary, at the cost of MSR accesses on VM-Entry
+	 * and VM-Exit.
+	 */
+	vmx->disable_fb_clear = !cpu_feature_enabled(X86_FEATURE_CLEAR_CPU_BUF) &&
+				(host_arch_capabilities & ARCH_CAP_FB_CLEAR_CTRL) &&
 				!boot_cpu_has_bug(X86_BUG_MDS) &&
 				!boot_cpu_has_bug(X86_BUG_TAA);
 
@@ -523,22 +533,14 @@ module_param(enlightened_vmcs, bool, 0444);
 static int hv_enable_l2_tlb_flush(struct kvm_vcpu *vcpu)
 {
 	struct hv_enlightened_vmcs *evmcs;
-	struct hv_partition_assist_pg **p_hv_pa_pg =
-			&to_kvm_hv(vcpu->kvm)->hv_pa_pg;
-	/*
-	 * Synthetic VM-Exit is not enabled in current code and so All
-	 * evmcs in singe VM shares same assist page.
-	 */
-	if (!*p_hv_pa_pg)
-		*p_hv_pa_pg = kzalloc(PAGE_SIZE, GFP_KERNEL_ACCOUNT);
+	hpa_t partition_assist_page = hv_get_partition_assist_page(vcpu);
 
-	if (!*p_hv_pa_pg)
+	if (partition_assist_page == INVALID_PAGE)
 		return -ENOMEM;
 
 	evmcs = (struct hv_enlightened_vmcs *)to_vmx(vcpu)->loaded_vmcs->vmcs;
 
-	evmcs->partition_assist_page =
-		__pa(*p_hv_pa_pg);
+	evmcs->partition_assist_page = partition_assist_page;
 	evmcs->hv_vm_id = (unsigned long)vcpu->kvm;
 	evmcs->hv_enlightenments_control.nested_flush_hypercall = 1;
 
@@ -745,7 +747,7 @@ static int vmx_set_guest_uret_msr(struct vcpu_vmx *vmx,
  */
 static int kvm_cpu_vmxoff(void)
 {
-	asm_volatile_goto("1: vmxoff\n\t"
+	asm goto("1: vmxoff\n\t"
 			  _ASM_EXTABLE(1b, %l[fault])
 			  ::: "cc", "memory" : fault);
 
@@ -1809,7 +1811,7 @@ static void vmx_inject_exception(struct kvm_vcpu *vcpu)
 		 * do generate error codes with bits 31:16 set, and so KVM's
 		 * ABI lets userspace shove in arbitrary 32-bit values.  Drop
 		 * the upper bits to avoid VM-Fail, losing information that
-		 * does't really exist is preferable to killing the VM.
+		 * doesn't really exist is preferable to killing the VM.
 		 */
 		vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE, (u16)ex->error_code);
 		intr_info |= INTR_INFO_DELIVER_CODE_MASK;
@@ -2055,6 +2057,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		if (vmx_get_vmx_msr(&vmx->nested.msrs, msr_info->index,
 				    &msr_info->data))
 			return 1;
+#ifdef CONFIG_KVM_HYPERV
 		/*
 		 * Enlightened VMCS v1 doesn't have certain VMCS fields but
 		 * instead of just ignoring the features, different Hyper-V
@@ -2065,6 +2068,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		if (!msr_info->host_initiated && guest_cpuid_has_evmcs(vcpu))
 			nested_evmcs_filter_control_msr(vcpu, msr_info->index,
 							&msr_info->data);
+#endif
 		break;
 	case MSR_IA32_RTIT_CTL:
 		if (!vmx_pt_mode_is_host_guest())
@@ -2789,7 +2793,7 @@ static int kvm_cpu_vmxon(u64 vmxon_pointer)
 
 	cr4_set_bits(X86_CR4_VMXE);
 
-	asm_volatile_goto("1: vmxon %[vmxon_pointer]\n\t"
+	asm goto("1: vmxon %[vmxon_pointer]\n\t"
 			  _ASM_EXTABLE(1b, %l[fault])
 			  : : [vmxon_pointer] "m"(vmxon_pointer)
 			  : : fault);
@@ -3400,7 +3404,8 @@ static void vmx_load_mmu_pgd(struct kvm_vcpu *vcpu, hpa_t root_hpa,
 			update_guest_cr3 = false;
 		vmx_ept_load_pdptrs(vcpu);
 	} else {
-		guest_cr3 = root_hpa | kvm_get_active_pcid(vcpu);
+		guest_cr3 = root_hpa | kvm_get_active_pcid(vcpu) |
+			    kvm_get_active_cr3_lam_bits(vcpu);
 	}
 
 	if (update_guest_cr3)
@@ -4833,7 +4838,10 @@ static void __vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 	vmx->nested.posted_intr_nv = -1;
 	vmx->nested.vmxon_ptr = INVALID_GPA;
 	vmx->nested.current_vmptr = INVALID_GPA;
+
+#ifdef CONFIG_KVM_HYPERV
 	vmx->nested.hv_evmcs_vmptr = EVMPTR_INVALID;
+#endif
 
 	vcpu->arch.microcode_version = 0x100000000ULL;
 	vmx->msr_ia32_feature_control_valid_bits = FEAT_CTL_LOCKED;
@@ -5782,7 +5790,7 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu)
 	 * would also use advanced VM-exit information for EPT violations to
 	 * reconstruct the page fault error code.
 	 */
-	if (unlikely(allow_smaller_maxphyaddr && kvm_vcpu_is_illegal_gpa(vcpu, gpa)))
+	if (unlikely(allow_smaller_maxphyaddr && !kvm_vcpu_is_legal_gpa(vcpu, gpa)))
 		return kvm_emulate_instruction(vcpu, 0);
 
 	return kvm_mmu_page_fault(vcpu, gpa, error_code, NULL, 0);
@@ -6757,10 +6765,10 @@ static void vmx_set_apic_access_page_addr(struct kvm_vcpu *vcpu)
 		return;
 
 	/*
-	 * Grab the memslot so that the hva lookup for the mmu_notifier retry
-	 * is guaranteed to use the same memslot as the pfn lookup, i.e. rely
-	 * on the pfn lookup's validation of the memslot to ensure a valid hva
-	 * is used for the retry check.
+	 * Explicitly grab the memslot using KVM's internal slot ID to ensure
+	 * KVM doesn't unintentionally grab a userspace memslot.  It _should_
+	 * be impossible for userspace to create a memslot for the APIC when
+	 * APICv is enabled, but paranoia won't hurt in this case.
 	 */
 	slot = id_to_memslot(slots, APIC_ACCESS_PAGE_PRIVATE_MEMSLOT);
 	if (!slot || slot->flags & KVM_MEMSLOT_INVALID)
@@ -6785,8 +6793,7 @@ static void vmx_set_apic_access_page_addr(struct kvm_vcpu *vcpu)
 		return;
 
 	read_lock(&vcpu->kvm->mmu_lock);
-	if (mmu_invalidate_retry_hva(kvm, mmu_seq,
-				     gfn_to_hva_memslot(slot, gfn))) {
+	if (mmu_invalidate_retry_gfn(kvm, mmu_seq, gfn)) {
 		kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
 		read_unlock(&vcpu->kvm->mmu_lock);
 		goto out;
@@ -7226,11 +7233,14 @@ static noinstr void vmx_vcpu_enter_exit(struct kvm_vcpu *vcpu,
 
 	guest_state_enter_irqoff();
 
-	/* L1D Flush includes CPU buffer clear to mitigate MDS */
+	/*
+	 * L1D Flush includes CPU buffer clear to mitigate MDS, but VERW
+	 * mitigation for MDS is done late in VMentry and is still
+	 * executed in spite of L1D Flush. This is because an extra VERW
+	 * should not matter much after the big hammer L1D Flush.
+	 */
 	if (static_branch_unlikely(&vmx_l1d_should_flush))
 		vmx_l1d_flush(vcpu);
-	else if (static_branch_unlikely(&mds_user_clear))
-		mds_clear_cpu_buffers();
 	else if (static_branch_unlikely(&mmio_stale_data_clear) &&
 		 kvm_arch_has_assigned_device(vcpu->kvm))
 		mds_clear_cpu_buffers();
@@ -7674,6 +7684,9 @@ static void nested_vmx_cr_fixed1_bits_update(struct kvm_vcpu *vcpu)
 	cr4_fixed1_update(X86_CR4_UMIP,       ecx, feature_bit(UMIP));
 	cr4_fixed1_update(X86_CR4_LA57,       ecx, feature_bit(LA57));
 
+	entry = kvm_find_cpuid_entry_index(vcpu, 0x7, 1);
+	cr4_fixed1_update(X86_CR4_LAM_SUP,    eax, feature_bit(LAM));
+
 #undef cr4_fixed1_update
 }
 
@@ -7760,6 +7773,7 @@ static void vmx_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu)
 		kvm_governed_feature_check_and_set(vcpu, X86_FEATURE_XSAVES);
 
 	kvm_governed_feature_check_and_set(vcpu, X86_FEATURE_VMX);
+	kvm_governed_feature_check_and_set(vcpu, X86_FEATURE_LAM);
 
 	vmx_setup_uret_msrs(vmx);
 
@@ -8206,6 +8220,50 @@ static void vmx_vm_destroy(struct kvm *kvm)
 	free_pages((unsigned long)kvm_vmx->pid_table, vmx_get_pid_table_order(kvm));
 }
 
+/*
+ * Note, the SDM states that the linear address is masked *after* the modified
+ * canonicality check, whereas KVM masks (untags) the address and then performs
+ * a "normal" canonicality check.  Functionally, the two methods are identical,
+ * and when the masking occurs relative to the canonicality check isn't visible
+ * to software, i.e. KVM's behavior doesn't violate the SDM.
+ */
+gva_t vmx_get_untagged_addr(struct kvm_vcpu *vcpu, gva_t gva, unsigned int flags)
+{
+	int lam_bit;
+	unsigned long cr3_bits;
+
+	if (flags & (X86EMUL_F_FETCH | X86EMUL_F_IMPLICIT | X86EMUL_F_INVLPG))
+		return gva;
+
+	if (!is_64_bit_mode(vcpu))
+		return gva;
+
+	/*
+	 * Bit 63 determines if the address should be treated as user address
+	 * or a supervisor address.
+	 */
+	if (!(gva & BIT_ULL(63))) {
+		cr3_bits = kvm_get_active_cr3_lam_bits(vcpu);
+		if (!(cr3_bits & (X86_CR3_LAM_U57 | X86_CR3_LAM_U48)))
+			return gva;
+
+		/* LAM_U48 is ignored if LAM_U57 is set. */
+		lam_bit = cr3_bits & X86_CR3_LAM_U57 ? 56 : 47;
+	} else {
+		if (!kvm_is_cr4_bit_set(vcpu, X86_CR4_LAM_SUP))
+			return gva;
+
+		lam_bit = kvm_is_cr4_bit_set(vcpu, X86_CR4_LA57) ? 56 : 47;
+	}
+
+	/*
+	 * Untag the address by sign-extending the lam_bit, but NOT to bit 63.
+	 * Bit 63 is retained from the raw virtual address so that untagging
+	 * doesn't change a user access to a supervisor access, and vice versa.
+	 */
+	return (sign_extend64(gva, lam_bit) & ~BIT_ULL(63)) | (gva & BIT_ULL(63));
+}
+
 static struct kvm_x86_ops vmx_x86_ops __initdata = {
 	.name = KBUILD_MODNAME,
 
@@ -8346,6 +8404,8 @@ static struct kvm_x86_ops vmx_x86_ops __initdata = {
 	.complete_emulated_msr = kvm_complete_insn_gp,
 
 	.vcpu_deliver_sipi_vector = kvm_vcpu_deliver_sipi_vector,
+
+	.get_untagged_addr = vmx_get_untagged_addr,
 };
 
 static unsigned int vmx_handle_intel_pt_intr(void)
diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
index c2130d2c8e24..e3b0985bb74a 100644
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -241,9 +241,11 @@ struct nested_vmx {
 		bool guest_mode;
 	} smm;
 
+#ifdef CONFIG_KVM_HYPERV
 	gpa_t hv_evmcs_vmptr;
 	struct kvm_host_map hv_evmcs_map;
 	struct hv_enlightened_vmcs *hv_evmcs;
+#endif
 };
 
 struct vcpu_vmx {
@@ -420,6 +422,8 @@ void vmx_enable_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr, int type);
 u64 vmx_get_l2_tsc_offset(struct kvm_vcpu *vcpu);
 u64 vmx_get_l2_tsc_multiplier(struct kvm_vcpu *vcpu);
 
+gva_t vmx_get_untagged_addr(struct kvm_vcpu *vcpu, gva_t gva, unsigned int flags);
+
 static inline void vmx_set_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr,
 					     int type, bool value)
 {
@@ -745,14 +749,4 @@ static inline bool vmx_can_use_ipiv(struct kvm_vcpu *vcpu)
 	return  lapic_in_kernel(vcpu) && enable_ipiv;
 }
 
-static inline bool guest_cpuid_has_evmcs(struct kvm_vcpu *vcpu)
-{
-	/*
-	 * eVMCS is exposed to the guest if Hyper-V is enabled in CPUID and
-	 * eVMCS has been explicitly enabled by userspace.
-	 */
-	return vcpu->arch.hyperv_enabled &&
-	       to_vmx(vcpu)->nested.enlightened_vmcs_enabled;
-}
-
 #endif /* __KVM_X86_VMX_H */
diff --git a/arch/x86/kvm/vmx/vmx_onhyperv.c b/arch/x86/kvm/vmx/vmx_onhyperv.c
new file mode 100644
index 000000000000..b9a8b91166d0
--- /dev/null
+++ b/arch/x86/kvm/vmx/vmx_onhyperv.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "capabilities.h"
+#include "vmx_onhyperv.h"
+
+DEFINE_STATIC_KEY_FALSE(__kvm_is_using_evmcs);
+
+/*
+ * KVM on Hyper-V always uses the latest known eVMCSv1 revision, the assumption
+ * is: in case a feature has corresponding fields in eVMCS described and it was
+ * exposed in VMX feature MSRs, KVM is free to use it. Warn if KVM meets a
+ * feature which has no corresponding eVMCS field, this likely means that KVM
+ * needs to be updated.
+ */
+#define evmcs_check_vmcs_conf(field, ctrl)					\
+	do {									\
+		typeof(vmcs_conf->field) unsupported;				\
+										\
+		unsupported = vmcs_conf->field & ~EVMCS1_SUPPORTED_ ## ctrl;	\
+		if (unsupported) {						\
+			pr_warn_once(#field " unsupported with eVMCS: 0x%llx\n",\
+				     (u64)unsupported);				\
+			vmcs_conf->field &= EVMCS1_SUPPORTED_ ## ctrl;		\
+		}								\
+	}									\
+	while (0)
+
+void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf)
+{
+	evmcs_check_vmcs_conf(cpu_based_exec_ctrl, EXEC_CTRL);
+	evmcs_check_vmcs_conf(pin_based_exec_ctrl, PINCTRL);
+	evmcs_check_vmcs_conf(cpu_based_2nd_exec_ctrl, 2NDEXEC);
+	evmcs_check_vmcs_conf(cpu_based_3rd_exec_ctrl, 3RDEXEC);
+	evmcs_check_vmcs_conf(vmentry_ctrl, VMENTRY_CTRL);
+	evmcs_check_vmcs_conf(vmexit_ctrl, VMEXIT_CTRL);
+}
diff --git a/arch/x86/kvm/vmx/vmx_onhyperv.h b/arch/x86/kvm/vmx/vmx_onhyperv.h
new file mode 100644
index 000000000000..eb48153bfd73
--- /dev/null
+++ b/arch/x86/kvm/vmx/vmx_onhyperv.h
@@ -0,0 +1,125 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ARCH_X86_KVM_VMX_ONHYPERV_H__
+#define __ARCH_X86_KVM_VMX_ONHYPERV_H__
+
+#include <asm/hyperv-tlfs.h>
+#include <asm/mshyperv.h>
+
+#include <linux/jump_label.h>
+
+#include "capabilities.h"
+#include "hyperv_evmcs.h"
+#include "vmcs12.h"
+
+#define current_evmcs ((struct hv_enlightened_vmcs *)this_cpu_read(current_vmcs))
+
+#if IS_ENABLED(CONFIG_HYPERV)
+
+DECLARE_STATIC_KEY_FALSE(__kvm_is_using_evmcs);
+
+static __always_inline bool kvm_is_using_evmcs(void)
+{
+	return static_branch_unlikely(&__kvm_is_using_evmcs);
+}
+
+static __always_inline int get_evmcs_offset(unsigned long field,
+					    u16 *clean_field)
+{
+	int offset = evmcs_field_offset(field, clean_field);
+
+	WARN_ONCE(offset < 0, "accessing unsupported EVMCS field %lx\n", field);
+	return offset;
+}
+
+static __always_inline void evmcs_write64(unsigned long field, u64 value)
+{
+	u16 clean_field;
+	int offset = get_evmcs_offset(field, &clean_field);
+
+	if (offset < 0)
+		return;
+
+	*(u64 *)((char *)current_evmcs + offset) = value;
+
+	current_evmcs->hv_clean_fields &= ~clean_field;
+}
+
+static __always_inline void evmcs_write32(unsigned long field, u32 value)
+{
+	u16 clean_field;
+	int offset = get_evmcs_offset(field, &clean_field);
+
+	if (offset < 0)
+		return;
+
+	*(u32 *)((char *)current_evmcs + offset) = value;
+	current_evmcs->hv_clean_fields &= ~clean_field;
+}
+
+static __always_inline void evmcs_write16(unsigned long field, u16 value)
+{
+	u16 clean_field;
+	int offset = get_evmcs_offset(field, &clean_field);
+
+	if (offset < 0)
+		return;
+
+	*(u16 *)((char *)current_evmcs + offset) = value;
+	current_evmcs->hv_clean_fields &= ~clean_field;
+}
+
+static __always_inline u64 evmcs_read64(unsigned long field)
+{
+	int offset = get_evmcs_offset(field, NULL);
+
+	if (offset < 0)
+		return 0;
+
+	return *(u64 *)((char *)current_evmcs + offset);
+}
+
+static __always_inline u32 evmcs_read32(unsigned long field)
+{
+	int offset = get_evmcs_offset(field, NULL);
+
+	if (offset < 0)
+		return 0;
+
+	return *(u32 *)((char *)current_evmcs + offset);
+}
+
+static __always_inline u16 evmcs_read16(unsigned long field)
+{
+	int offset = get_evmcs_offset(field, NULL);
+
+	if (offset < 0)
+		return 0;
+
+	return *(u16 *)((char *)current_evmcs + offset);
+}
+
+static inline void evmcs_load(u64 phys_addr)
+{
+	struct hv_vp_assist_page *vp_ap =
+		hv_get_vp_assist_page(smp_processor_id());
+
+	if (current_evmcs->hv_enlightenments_control.nested_flush_hypercall)
+		vp_ap->nested_control.features.directhypercall = 1;
+	vp_ap->current_nested_vmcs = phys_addr;
+	vp_ap->enlighten_vmentry = 1;
+}
+
+void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf);
+#else /* !IS_ENABLED(CONFIG_HYPERV) */
+static __always_inline bool kvm_is_using_evmcs(void) { return false; }
+static __always_inline void evmcs_write64(unsigned long field, u64 value) {}
+static __always_inline void evmcs_write32(unsigned long field, u32 value) {}
+static __always_inline void evmcs_write16(unsigned long field, u16 value) {}
+static __always_inline u64 evmcs_read64(unsigned long field) { return 0; }
+static __always_inline u32 evmcs_read32(unsigned long field) { return 0; }
+static __always_inline u16 evmcs_read16(unsigned long field) { return 0; }
+static inline void evmcs_load(u64 phys_addr) {}
+#endif /* IS_ENABLED(CONFIG_HYPERV) */
+
+#endif /* __ARCH_X86_KVM_VMX_ONHYPERV_H__ */
diff --git a/arch/x86/kvm/vmx/vmx_ops.h b/arch/x86/kvm/vmx/vmx_ops.h
index 33af7b4c6eb4..8060e5fc6dbd 100644
--- a/arch/x86/kvm/vmx/vmx_ops.h
+++ b/arch/x86/kvm/vmx/vmx_ops.h
@@ -6,7 +6,7 @@
 
 #include <asm/vmx.h>
 
-#include "hyperv.h"
+#include "vmx_onhyperv.h"
 #include "vmcs.h"
 #include "../x86.h"
 
@@ -94,7 +94,7 @@ static __always_inline unsigned long __vmcs_readl(unsigned long field)
 
 #ifdef CONFIG_CC_HAS_ASM_GOTO_OUTPUT
 
-	asm_volatile_goto("1: vmread %[field], %[output]\n\t"
+	asm_goto_output("1: vmread %[field], %[output]\n\t"
 			  "jna %l[do_fail]\n\t"
 
 			  _ASM_EXTABLE(1b, %l[do_exception])
@@ -188,7 +188,7 @@ static __always_inline unsigned long vmcs_readl(unsigned long field)
 
 #define vmx_asm1(insn, op1, error_args...)				\
 do {									\
-	asm_volatile_goto("1: " __stringify(insn) " %0\n\t"		\
+	asm goto("1: " __stringify(insn) " %0\n\t"			\
 			  ".byte 0x2e\n\t" /* branch not taken hint */	\
 			  "jna %l[error]\n\t"				\
 			  _ASM_EXTABLE(1b, %l[fault])			\
@@ -205,7 +205,7 @@ fault:									\
 
 #define vmx_asm2(insn, op1, op2, error_args...)				\
 do {									\
-	asm_volatile_goto("1: "  __stringify(insn) " %1, %0\n\t"	\
+	asm goto("1: "  __stringify(insn) " %1, %0\n\t"			\
 			  ".byte 0x2e\n\t" /* branch not taken hint */	\
 			  "jna %l[error]\n\t"				\
 			  _ASM_EXTABLE(1b, %l[fault])			\
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 1a3aaa7dafae..e02cc710f56d 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1284,7 +1284,7 @@ int kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 	 * stuff CR3, e.g. for RSM emulation, and there is no guarantee that
 	 * the current vCPU mode is accurate.
 	 */
-	if (kvm_vcpu_is_illegal_gpa(vcpu, cr3))
+	if (!kvm_vcpu_is_legal_cr3(vcpu, cr3))
 		return 1;
 
 	if (is_pae_paging(vcpu) && !load_pdptrs(vcpu, cr3))
@@ -1504,6 +1504,8 @@ static unsigned num_msrs_to_save;
 static const u32 emulated_msrs_all[] = {
 	MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
 	MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW,
+
+#ifdef CONFIG_KVM_HYPERV
 	HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL,
 	HV_X64_MSR_TIME_REF_COUNT, HV_X64_MSR_REFERENCE_TSC,
 	HV_X64_MSR_TSC_FREQUENCY, HV_X64_MSR_APIC_FREQUENCY,
@@ -1521,6 +1523,7 @@ static const u32 emulated_msrs_all[] = {
 	HV_X64_MSR_SYNDBG_CONTROL, HV_X64_MSR_SYNDBG_STATUS,
 	HV_X64_MSR_SYNDBG_SEND_BUFFER, HV_X64_MSR_SYNDBG_RECV_BUFFER,
 	HV_X64_MSR_SYNDBG_PENDING_BUFFER,
+#endif
 
 	MSR_KVM_ASYNC_PF_EN, MSR_KVM_STEAL_TIME,
 	MSR_KVM_PV_EOI_EN, MSR_KVM_ASYNC_PF_INT, MSR_KVM_ASYNC_PF_ACK,
@@ -1701,22 +1704,17 @@ static int do_get_msr_feature(struct kvm_vcpu *vcpu, unsigned index, u64 *data)
 	struct kvm_msr_entry msr;
 	int r;
 
+	/* Unconditionally clear the output for simplicity */
+	msr.data = 0;
 	msr.index = index;
 	r = kvm_get_msr_feature(&msr);
 
-	if (r == KVM_MSR_RET_INVALID) {
-		/* Unconditionally clear the output for simplicity */
-		*data = 0;
-		if (kvm_msr_ignored_check(index, 0, false))
-			r = 0;
-	}
-
-	if (r)
-		return r;
+	if (r == KVM_MSR_RET_INVALID && kvm_msr_ignored_check(index, 0, false))
+		r = 0;
 
 	*data = msr.data;
 
-	return 0;
+	return r;
 }
 
 static bool __kvm_valid_efer(struct kvm_vcpu *vcpu, u64 efer)
@@ -1779,6 +1777,10 @@ static int set_efer(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	if ((efer ^ old_efer) & KVM_MMU_EFER_ROLE_BITS)
 		kvm_mmu_reset_context(vcpu);
 
+	if (!static_cpu_has(X86_FEATURE_XSAVES) &&
+	    (efer & EFER_SVME))
+		kvm_hv_xsaves_xsavec_maybe_warn(vcpu);
+
 	return 0;
 }
 
@@ -2504,32 +2506,35 @@ static u64 compute_guest_tsc(struct kvm_vcpu *vcpu, s64 kernel_ns)
 }
 
 #ifdef CONFIG_X86_64
-static inline int gtod_is_based_on_tsc(int mode)
+static inline bool gtod_is_based_on_tsc(int mode)
 {
 	return mode == VDSO_CLOCKMODE_TSC || mode == VDSO_CLOCKMODE_HVCLOCK;
 }
 #endif
 
-static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu)
+static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu, bool new_generation)
 {
 #ifdef CONFIG_X86_64
-	bool vcpus_matched;
 	struct kvm_arch *ka = &vcpu->kvm->arch;
 	struct pvclock_gtod_data *gtod = &pvclock_gtod_data;
 
-	vcpus_matched = (ka->nr_vcpus_matched_tsc + 1 ==
-			 atomic_read(&vcpu->kvm->online_vcpus));
+	/*
+	 * To use the masterclock, the host clocksource must be based on TSC
+	 * and all vCPUs must have matching TSCs.  Note, the count for matching
+	 * vCPUs doesn't include the reference vCPU, hence "+1".
+	 */
+	bool use_master_clock = (ka->nr_vcpus_matched_tsc + 1 ==
+				 atomic_read(&vcpu->kvm->online_vcpus)) &&
+				gtod_is_based_on_tsc(gtod->clock.vclock_mode);
 
 	/*
-	 * Once the masterclock is enabled, always perform request in
-	 * order to update it.
-	 *
-	 * In order to enable masterclock, the host clocksource must be TSC
-	 * and the vcpus need to have matched TSCs.  When that happens,
-	 * perform request to enable masterclock.
+	 * Request a masterclock update if the masterclock needs to be toggled
+	 * on/off, or when starting a new generation and the masterclock is
+	 * enabled (compute_guest_tsc() requires the masterclock snapshot to be
+	 * taken _after_ the new generation is created).
 	 */
-	if (ka->use_master_clock ||
-	    (gtod_is_based_on_tsc(gtod->clock.vclock_mode) && vcpus_matched))
+	if ((ka->use_master_clock && new_generation) ||
+	    (ka->use_master_clock != use_master_clock))
 		kvm_make_request(KVM_REQ_MASTERCLOCK_UPDATE, vcpu);
 
 	trace_kvm_track_tsc(vcpu->vcpu_id, ka->nr_vcpus_matched_tsc,
@@ -2706,7 +2711,7 @@ static void __kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 offset, u64 tsc,
 	vcpu->arch.this_tsc_nsec = kvm->arch.cur_tsc_nsec;
 	vcpu->arch.this_tsc_write = kvm->arch.cur_tsc_write;
 
-	kvm_track_tsc_matching(vcpu);
+	kvm_track_tsc_matching(vcpu, !matched);
 }
 
 static void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 *user_value)
@@ -3104,7 +3109,8 @@ u64 get_kvmclock_ns(struct kvm *kvm)
 
 static void kvm_setup_guest_pvclock(struct kvm_vcpu *v,
 				    struct gfn_to_pfn_cache *gpc,
-				    unsigned int offset)
+				    unsigned int offset,
+				    bool force_tsc_unstable)
 {
 	struct kvm_vcpu_arch *vcpu = &v->arch;
 	struct pvclock_vcpu_time_info *guest_hv_clock;
@@ -3141,6 +3147,10 @@ static void kvm_setup_guest_pvclock(struct kvm_vcpu *v,
 	}
 
 	memcpy(guest_hv_clock, &vcpu->hv_clock, sizeof(*guest_hv_clock));
+
+	if (force_tsc_unstable)
+		guest_hv_clock->flags &= ~PVCLOCK_TSC_STABLE_BIT;
+
 	smp_wmb();
 
 	guest_hv_clock->version = ++vcpu->hv_clock.version;
@@ -3161,6 +3171,16 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	u64 tsc_timestamp, host_tsc;
 	u8 pvclock_flags;
 	bool use_master_clock;
+#ifdef CONFIG_KVM_XEN
+	/*
+	 * For Xen guests we may need to override PVCLOCK_TSC_STABLE_BIT as unless
+	 * explicitly told to use TSC as its clocksource Xen will not set this bit.
+	 * This default behaviour led to bugs in some guest kernels which cause
+	 * problems if they observe PVCLOCK_TSC_STABLE_BIT in the pvclock flags.
+	 */
+	bool xen_pvclock_tsc_unstable =
+		ka->xen_hvm_config.flags & KVM_XEN_HVM_CONFIG_PVCLOCK_TSC_UNSTABLE;
+#endif
 
 	kernel_ns = 0;
 	host_tsc = 0;
@@ -3239,13 +3259,15 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	vcpu->hv_clock.flags = pvclock_flags;
 
 	if (vcpu->pv_time.active)
-		kvm_setup_guest_pvclock(v, &vcpu->pv_time, 0);
+		kvm_setup_guest_pvclock(v, &vcpu->pv_time, 0, false);
 #ifdef CONFIG_KVM_XEN
 	if (vcpu->xen.vcpu_info_cache.active)
 		kvm_setup_guest_pvclock(v, &vcpu->xen.vcpu_info_cache,
-					offsetof(struct compat_vcpu_info, time));
+					offsetof(struct compat_vcpu_info, time),
+					xen_pvclock_tsc_unstable);
 	if (vcpu->xen.vcpu_time_info_cache.active)
-		kvm_setup_guest_pvclock(v, &vcpu->xen.vcpu_time_info_cache, 0);
+		kvm_setup_guest_pvclock(v, &vcpu->xen.vcpu_time_info_cache, 0,
+					xen_pvclock_tsc_unstable);
 #endif
 	kvm_hv_setup_tsc_page(v->kvm, &vcpu->hv_clock);
 	return 0;
@@ -4020,6 +4042,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		 * the need to ignore the workaround.
 		 */
 		break;
+#ifdef CONFIG_KVM_HYPERV
 	case HV_X64_MSR_GUEST_OS_ID ... HV_X64_MSR_SINT15:
 	case HV_X64_MSR_SYNDBG_CONTROL ... HV_X64_MSR_SYNDBG_PENDING_BUFFER:
 	case HV_X64_MSR_SYNDBG_OPTIONS:
@@ -4032,6 +4055,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	case HV_X64_MSR_TSC_INVARIANT_CONTROL:
 		return kvm_hv_set_msr_common(vcpu, msr, data,
 					     msr_info->host_initiated);
+#endif
 	case MSR_IA32_BBL_CR_CTL3:
 		/* Drop writes to this legacy MSR -- see rdmsr
 		 * counterpart for further detail.
@@ -4377,6 +4401,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		 */
 		msr_info->data = 0x20000000;
 		break;
+#ifdef CONFIG_KVM_HYPERV
 	case HV_X64_MSR_GUEST_OS_ID ... HV_X64_MSR_SINT15:
 	case HV_X64_MSR_SYNDBG_CONTROL ... HV_X64_MSR_SYNDBG_PENDING_BUFFER:
 	case HV_X64_MSR_SYNDBG_OPTIONS:
@@ -4390,6 +4415,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		return kvm_hv_get_msr_common(vcpu,
 					     msr_info->index, &msr_info->data,
 					     msr_info->host_initiated);
+#endif
 	case MSR_IA32_BBL_CR_CTL3:
 		/* This legacy MSR exists but isn't fully documented in current
 		 * silicon.  It is however accessed by winxp in very narrow
@@ -4527,6 +4553,7 @@ static inline bool kvm_can_mwait_in_guest(void)
 		boot_cpu_has(X86_FEATURE_ARAT);
 }
 
+#ifdef CONFIG_KVM_HYPERV
 static int kvm_ioctl_get_supported_hv_cpuid(struct kvm_vcpu *vcpu,
 					    struct kvm_cpuid2 __user *cpuid_arg)
 {
@@ -4547,6 +4574,14 @@ static int kvm_ioctl_get_supported_hv_cpuid(struct kvm_vcpu *vcpu,
 
 	return 0;
 }
+#endif
+
+static bool kvm_is_vm_type_supported(unsigned long type)
+{
+	return type == KVM_X86_DEFAULT_VM ||
+	       (type == KVM_X86_SW_PROTECTED_VM &&
+		IS_ENABLED(CONFIG_KVM_SW_PROTECTED_VM) && tdp_mmu_enabled);
+}
 
 int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 {
@@ -4573,9 +4608,11 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_PIT_STATE2:
 	case KVM_CAP_SET_IDENTITY_MAP_ADDR:
 	case KVM_CAP_VCPU_EVENTS:
+#ifdef CONFIG_KVM_HYPERV
 	case KVM_CAP_HYPERV:
 	case KVM_CAP_HYPERV_VAPIC:
 	case KVM_CAP_HYPERV_SPIN:
+	case KVM_CAP_HYPERV_TIME:
 	case KVM_CAP_HYPERV_SYNIC:
 	case KVM_CAP_HYPERV_SYNIC2:
 	case KVM_CAP_HYPERV_VP_INDEX:
@@ -4585,6 +4622,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_HYPERV_CPUID:
 	case KVM_CAP_HYPERV_ENFORCE_CPUID:
 	case KVM_CAP_SYS_HYPERV_CPUID:
+#endif
 	case KVM_CAP_PCI_SEGMENT:
 	case KVM_CAP_DEBUGREGS:
 	case KVM_CAP_X86_ROBUST_SINGLESTEP:
@@ -4594,7 +4632,6 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_GET_TSC_KHZ:
 	case KVM_CAP_KVMCLOCK_CTRL:
 	case KVM_CAP_READONLY_MEM:
-	case KVM_CAP_HYPERV_TIME:
 	case KVM_CAP_IOAPIC_POLARITY_IGNORED:
 	case KVM_CAP_TSC_DEADLINE_TIMER:
 	case KVM_CAP_DISABLE_QUIRKS:
@@ -4625,6 +4662,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_ENABLE_CAP:
 	case KVM_CAP_VM_DISABLE_NX_HUGE_PAGES:
 	case KVM_CAP_IRQFD_RESAMPLE:
+	case KVM_CAP_MEMORY_FAULT_INFO:
 		r = 1;
 		break;
 	case KVM_CAP_EXIT_HYPERCALL:
@@ -4638,7 +4676,8 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		    KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL |
 		    KVM_XEN_HVM_CONFIG_SHARED_INFO |
 		    KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL |
-		    KVM_XEN_HVM_CONFIG_EVTCHN_SEND;
+		    KVM_XEN_HVM_CONFIG_EVTCHN_SEND |
+		    KVM_XEN_HVM_CONFIG_PVCLOCK_TSC_UNSTABLE;
 		if (sched_info_on())
 			r |= KVM_XEN_HVM_CONFIG_RUNSTATE |
 			     KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG;
@@ -4704,12 +4743,14 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = kvm_x86_ops.nested_ops->get_state ?
 			kvm_x86_ops.nested_ops->get_state(NULL, NULL, 0) : 0;
 		break;
+#ifdef CONFIG_KVM_HYPERV
 	case KVM_CAP_HYPERV_DIRECT_TLBFLUSH:
 		r = kvm_x86_ops.enable_l2_tlb_flush != NULL;
 		break;
 	case KVM_CAP_HYPERV_ENLIGHTENED_VMCS:
 		r = kvm_x86_ops.nested_ops->enable_evmcs != NULL;
 		break;
+#endif
 	case KVM_CAP_SMALLER_MAXPHYADDR:
 		r = (int) allow_smaller_maxphyaddr;
 		break;
@@ -4738,6 +4779,11 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_X86_NOTIFY_VMEXIT:
 		r = kvm_caps.has_notify_vmexit;
 		break;
+	case KVM_CAP_VM_TYPES:
+		r = BIT(KVM_X86_DEFAULT_VM);
+		if (kvm_is_vm_type_supported(KVM_X86_SW_PROTECTED_VM))
+			r |= BIT(KVM_X86_SW_PROTECTED_VM);
+		break;
 	default:
 		break;
 	}
@@ -4871,9 +4917,11 @@ long kvm_arch_dev_ioctl(struct file *filp,
 	case KVM_GET_MSRS:
 		r = msr_io(NULL, argp, do_get_msr_feature, 1);
 		break;
+#ifdef CONFIG_KVM_HYPERV
 	case KVM_GET_SUPPORTED_HV_CPUID:
 		r = kvm_ioctl_get_supported_hv_cpuid(NULL, argp);
 		break;
+#endif
 	case KVM_GET_DEVICE_ATTR: {
 		struct kvm_device_attr attr;
 		r = -EFAULT;
@@ -5405,7 +5453,8 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
 	if (events->flags & KVM_VCPUEVENT_VALID_NMI_PENDING) {
 		vcpu->arch.nmi_pending = 0;
 		atomic_set(&vcpu->arch.nmi_queued, events->nmi.pending);
-		kvm_make_request(KVM_REQ_NMI, vcpu);
+		if (events->nmi.pending)
+			kvm_make_request(KVM_REQ_NMI, vcpu);
 	}
 	static_call(kvm_x86_set_nmi_mask)(vcpu, events->nmi.masked);
 
@@ -5699,14 +5748,11 @@ static int kvm_vcpu_ioctl_device_attr(struct kvm_vcpu *vcpu,
 static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 				     struct kvm_enable_cap *cap)
 {
-	int r;
-	uint16_t vmcs_version;
-	void __user *user_ptr;
-
 	if (cap->flags)
 		return -EINVAL;
 
 	switch (cap->cap) {
+#ifdef CONFIG_KVM_HYPERV
 	case KVM_CAP_HYPERV_SYNIC2:
 		if (cap->args[0])
 			return -EINVAL;
@@ -5718,16 +5764,22 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 		return kvm_hv_activate_synic(vcpu, cap->cap ==
 					     KVM_CAP_HYPERV_SYNIC2);
 	case KVM_CAP_HYPERV_ENLIGHTENED_VMCS:
-		if (!kvm_x86_ops.nested_ops->enable_evmcs)
-			return -ENOTTY;
-		r = kvm_x86_ops.nested_ops->enable_evmcs(vcpu, &vmcs_version);
-		if (!r) {
-			user_ptr = (void __user *)(uintptr_t)cap->args[0];
-			if (copy_to_user(user_ptr, &vmcs_version,
-					 sizeof(vmcs_version)))
-				r = -EFAULT;
+		{
+			int r;
+			uint16_t vmcs_version;
+			void __user *user_ptr;
+
+			if (!kvm_x86_ops.nested_ops->enable_evmcs)
+				return -ENOTTY;
+			r = kvm_x86_ops.nested_ops->enable_evmcs(vcpu, &vmcs_version);
+			if (!r) {
+				user_ptr = (void __user *)(uintptr_t)cap->args[0];
+				if (copy_to_user(user_ptr, &vmcs_version,
+						 sizeof(vmcs_version)))
+					r = -EFAULT;
+			}
+			return r;
 		}
-		return r;
 	case KVM_CAP_HYPERV_DIRECT_TLBFLUSH:
 		if (!kvm_x86_ops.enable_l2_tlb_flush)
 			return -ENOTTY;
@@ -5736,6 +5788,7 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 
 	case KVM_CAP_HYPERV_ENFORCE_CPUID:
 		return kvm_hv_set_enforce_cpuid(vcpu, cap->args[0]);
+#endif
 
 	case KVM_CAP_ENFORCE_PV_FEATURE_CPUID:
 		vcpu->arch.pv_cpuid.enforce = cap->args[0];
@@ -6128,9 +6181,11 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		srcu_read_unlock(&vcpu->kvm->srcu, idx);
 		break;
 	}
+#ifdef CONFIG_KVM_HYPERV
 	case KVM_GET_SUPPORTED_HV_CPUID:
 		r = kvm_ioctl_get_supported_hv_cpuid(vcpu, argp);
 		break;
+#endif
 #ifdef CONFIG_KVM_XEN
 	case KVM_XEN_VCPU_GET_ATTR: {
 		struct kvm_xen_vcpu_attr xva;
@@ -6961,6 +7016,9 @@ set_identity_unlock:
 		r = -EEXIST;
 		if (kvm->arch.vpit)
 			goto create_pit_unlock;
+		r = -ENOENT;
+		if (!pic_in_kernel(kvm))
+			goto create_pit_unlock;
 		r = -ENOMEM;
 		kvm->arch.vpit = kvm_create_pit(kvm, u.pit_config.flags);
 		if (kvm->arch.vpit)
@@ -7188,6 +7246,7 @@ set_pit2_out:
 		r = static_call(kvm_x86_mem_enc_unregister_region)(kvm, &region);
 		break;
 	}
+#ifdef CONFIG_KVM_HYPERV
 	case KVM_HYPERV_EVENTFD: {
 		struct kvm_hyperv_eventfd hvevfd;
 
@@ -7197,6 +7256,7 @@ set_pit2_out:
 		r = kvm_vm_ioctl_hv_eventfd(kvm, &hvevfd);
 		break;
 	}
+#endif
 	case KVM_SET_PMU_EVENT_FILTER:
 		r = kvm_vm_ioctl_set_pmu_event_filter(kvm, argp);
 		break;
@@ -7947,6 +8007,16 @@ static int emulator_cmpxchg_emulated(struct x86_emulate_ctxt *ctxt,
 
 	if (r < 0)
 		return X86EMUL_UNHANDLEABLE;
+
+	/*
+	 * Mark the page dirty _before_ checking whether or not the CMPXCHG was
+	 * successful, as the old value is written back on failure.  Note, for
+	 * live migration, this is unnecessarily conservative as CMPXCHG writes
+	 * back the original value and the access is atomic, but KVM's ABI is
+	 * that all writes are dirty logged, regardless of the value written.
+	 */
+	kvm_vcpu_mark_page_dirty(vcpu, gpa_to_gfn(gpa));
+
 	if (r)
 		return X86EMUL_CMPXCHG_FAILED;
 
@@ -8432,6 +8502,15 @@ static void emulator_vm_bugged(struct x86_emulate_ctxt *ctxt)
 		kvm_vm_bugged(kvm);
 }
 
+static gva_t emulator_get_untagged_addr(struct x86_emulate_ctxt *ctxt,
+					gva_t addr, unsigned int flags)
+{
+	if (!kvm_x86_ops.get_untagged_addr)
+		return addr;
+
+	return static_call(kvm_x86_get_untagged_addr)(emul_to_vcpu(ctxt), addr, flags);
+}
+
 static const struct x86_emulate_ops emulate_ops = {
 	.vm_bugged           = emulator_vm_bugged,
 	.read_gpr            = emulator_read_gpr,
@@ -8476,6 +8555,7 @@ static const struct x86_emulate_ops emulate_ops = {
 	.leave_smm           = emulator_leave_smm,
 	.triple_fault        = emulator_triple_fault,
 	.set_xcr             = emulator_set_xcr,
+	.get_untagged_addr   = emulator_get_untagged_addr,
 };
 
 static void toggle_interruptibility(struct kvm_vcpu *vcpu, u32 mask)
@@ -10165,7 +10245,7 @@ static void kvm_inject_exception(struct kvm_vcpu *vcpu)
  *
  * But, if a VM-Exit occurs during instruction execution, and KVM does NOT skip
  * the instruction or inject an exception, then KVM can incorrecty inject a new
- * asynchrounous event if the event became pending after the CPU fetched the
+ * asynchronous event if the event became pending after the CPU fetched the
  * instruction (in the guest).  E.g. if a page fault (#PF, #NPF, EPT violation)
  * occurs and is resolved by KVM, a coincident NMI, SMI, IRQ, etc... can be
  * injected on the restarted instruction instead of being deferred until the
@@ -10186,7 +10266,7 @@ static int kvm_check_and_inject_events(struct kvm_vcpu *vcpu,
 	int r;
 
 	/*
-	 * Process nested events first, as nested VM-Exit supercedes event
+	 * Process nested events first, as nested VM-Exit supersedes event
 	 * re-injection.  If there's an event queued for re-injection, it will
 	 * be saved into the appropriate vmc{b,s}12 fields on nested VM-Exit.
 	 */
@@ -10575,19 +10655,20 @@ static void vcpu_scan_ioapic(struct kvm_vcpu *vcpu)
 
 static void vcpu_load_eoi_exitmap(struct kvm_vcpu *vcpu)
 {
-	u64 eoi_exit_bitmap[4];
-
 	if (!kvm_apic_hw_enabled(vcpu->arch.apic))
 		return;
 
+#ifdef CONFIG_KVM_HYPERV
 	if (to_hv_vcpu(vcpu)) {
+		u64 eoi_exit_bitmap[4];
+
 		bitmap_or((ulong *)eoi_exit_bitmap,
 			  vcpu->arch.ioapic_handled_vectors,
 			  to_hv_synic(vcpu)->vec_bitmap, 256);
 		static_call_cond(kvm_x86_load_eoi_exitmap)(vcpu, eoi_exit_bitmap);
 		return;
 	}
-
+#endif
 	static_call_cond(kvm_x86_load_eoi_exitmap)(
 		vcpu, (u64 *)vcpu->arch.ioapic_handled_vectors);
 }
@@ -10678,9 +10759,11 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		 * the flushes are considered "remote" and not "local" because
 		 * the requests can be initiated from other vCPUs.
 		 */
+#ifdef CONFIG_KVM_HYPERV
 		if (kvm_check_request(KVM_REQ_HV_TLB_FLUSH, vcpu) &&
 		    kvm_hv_vcpu_flush_tlb(vcpu))
 			kvm_vcpu_flush_tlb_guest(vcpu);
+#endif
 
 		if (kvm_check_request(KVM_REQ_REPORT_TPR_ACCESS, vcpu)) {
 			vcpu->run->exit_reason = KVM_EXIT_TPR_ACCESS;
@@ -10733,6 +10816,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 			vcpu_load_eoi_exitmap(vcpu);
 		if (kvm_check_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu))
 			kvm_vcpu_reload_apic_access_page(vcpu);
+#ifdef CONFIG_KVM_HYPERV
 		if (kvm_check_request(KVM_REQ_HV_CRASH, vcpu)) {
 			vcpu->run->exit_reason = KVM_EXIT_SYSTEM_EVENT;
 			vcpu->run->system_event.type = KVM_SYSTEM_EVENT_CRASH;
@@ -10763,6 +10847,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		 */
 		if (kvm_check_request(KVM_REQ_HV_STIMER, vcpu))
 			kvm_hv_process_stimers(vcpu);
+#endif
 		if (kvm_check_request(KVM_REQ_APICV_UPDATE, vcpu))
 			kvm_vcpu_update_apicv(vcpu);
 		if (kvm_check_request(KVM_REQ_APF_READY, vcpu))
@@ -10884,7 +10969,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		/*
 		 * Assert that vCPU vs. VM APICv state is consistent.  An APICv
 		 * update must kick and wait for all vCPUs before toggling the
-		 * per-VM state, and responsing vCPUs must wait for the update
+		 * per-VM state, and responding vCPUs must wait for the update
 		 * to complete before servicing KVM_REQ_APICV_UPDATE.
 		 */
 		WARN_ON_ONCE((kvm_vcpu_apicv_activated(vcpu) != kvm_vcpu_apicv_active(vcpu)) &&
@@ -11081,6 +11166,7 @@ static int vcpu_run(struct kvm_vcpu *vcpu)
 {
 	int r;
 
+	vcpu->run->exit_reason = KVM_EXIT_UNKNOWN;
 	vcpu->arch.l1tf_flush_l1d = true;
 
 	for (;;) {
@@ -11598,7 +11684,7 @@ static bool kvm_is_valid_sregs(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs)
 		 */
 		if (!(sregs->cr4 & X86_CR4_PAE) || !(sregs->efer & EFER_LMA))
 			return false;
-		if (kvm_vcpu_is_illegal_gpa(vcpu, sregs->cr3))
+		if (!kvm_vcpu_is_legal_cr3(vcpu, sregs->cr3))
 			return false;
 	} else {
 		/*
@@ -12207,7 +12293,6 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 	}
 
 	if (!init_event) {
-		kvm_pmu_reset(vcpu);
 		vcpu->arch.smbase = 0x30000;
 
 		vcpu->arch.msr_misc_features_enables = 0;
@@ -12424,7 +12509,9 @@ void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu)
 
 void kvm_arch_free_vm(struct kvm *kvm)
 {
-	kfree(to_kvm_hv(kvm)->hv_pa_pg);
+#if IS_ENABLED(CONFIG_HYPERV)
+	kfree(kvm->arch.hv_pa_pg);
+#endif
 	__kvm_arch_free_vm(kvm);
 }
 
@@ -12434,9 +12521,11 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	int ret;
 	unsigned long flags;
 
-	if (type)
+	if (!kvm_is_vm_type_supported(type))
 		return -EINVAL;
 
+	kvm->arch.vm_type = type;
+
 	ret = kvm_page_track_init(kvm);
 	if (ret)
 		goto out;
@@ -12575,8 +12664,8 @@ void __user * __x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa,
 		hva = slot->userspace_addr;
 	}
 
-	for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) {
-		struct kvm_userspace_memory_region m;
+	for (i = 0; i < kvm_arch_nr_memslot_as_ids(kvm); i++) {
+		struct kvm_userspace_memory_region2 m;
 
 		m.slot = id | (i << 16);
 		m.flags = 0;
@@ -12726,6 +12815,10 @@ static int kvm_alloc_memslot_metadata(struct kvm *kvm,
 		}
 	}
 
+#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES
+	kvm_mmu_init_memslot_memory_attributes(kvm, slot);
+#endif
+
 	if (kvm_page_track_create_memslot(kvm, slot, npages))
 		goto out_free;
 
@@ -13536,6 +13629,10 @@ int kvm_handle_invpcid(struct kvm_vcpu *vcpu, unsigned long type, gva_t gva)
 
 	switch (type) {
 	case INVPCID_TYPE_INDIV_ADDR:
+		/*
+		 * LAM doesn't apply to addresses that are inputs to TLB
+		 * invalidation.
+		 */
 		if ((!pcid_enabled && (operand.pcid != 0)) ||
 		    is_noncanonical_address(operand.gla, vcpu)) {
 			kvm_inject_gp(vcpu, 0);
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 5184fde1dc54..2f7e19166658 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -530,6 +530,8 @@ bool kvm_msr_allowed(struct kvm_vcpu *vcpu, u32 index, u32 type);
 		__reserved_bits |= X86_CR4_VMXE;        \
 	if (!__cpu_has(__c, X86_FEATURE_PCID))          \
 		__reserved_bits |= X86_CR4_PCIDE;       \
+	if (!__cpu_has(__c, X86_FEATURE_LAM))           \
+		__reserved_bits |= X86_CR4_LAM_SUP;     \
 	__reserved_bits;                                \
 })
 
diff --git a/arch/x86/kvm/xen.c b/arch/x86/kvm/xen.c
index e53fad915a62..4b4e738c6f1b 100644
--- a/arch/x86/kvm/xen.c
+++ b/arch/x86/kvm/xen.c
@@ -1162,7 +1162,9 @@ int kvm_xen_hvm_config(struct kvm *kvm, struct kvm_xen_hvm_config *xhc)
 {
 	/* Only some feature flags need to be *enabled* by userspace */
 	u32 permitted_flags = KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL |
-		KVM_XEN_HVM_CONFIG_EVTCHN_SEND;
+		KVM_XEN_HVM_CONFIG_EVTCHN_SEND |
+		KVM_XEN_HVM_CONFIG_PVCLOCK_TSC_UNSTABLE;
+	u32 old_flags;
 
 	if (xhc->flags & ~permitted_flags)
 		return -EINVAL;
@@ -1183,9 +1185,14 @@ int kvm_xen_hvm_config(struct kvm *kvm, struct kvm_xen_hvm_config *xhc)
 	else if (!xhc->msr && kvm->arch.xen_hvm_config.msr)
 		static_branch_slow_dec_deferred(&kvm_xen_enabled);
 
+	old_flags = kvm->arch.xen_hvm_config.flags;
 	memcpy(&kvm->arch.xen_hvm_config, xhc, sizeof(*xhc));
 
 	mutex_unlock(&kvm->arch.xen.xen_lock);
+
+	if ((old_flags ^ xhc->flags) & KVM_XEN_HVM_CONFIG_PVCLOCK_TSC_UNSTABLE)
+		kvm_make_all_cpus_request(kvm, KVM_REQ_CLOCK_UPDATE);
+
 	return 0;
 }
 
@@ -2088,7 +2095,7 @@ static bool kvm_xen_hcall_evtchn_send(struct kvm_vcpu *vcpu, u64 param, u64 *r)
 		if (ret < 0 && ret != -ENOTCONN)
 			return false;
 	} else {
-		eventfd_signal(evtchnfd->deliver.eventfd.ctx, 1);
+		eventfd_signal(evtchnfd->deliver.eventfd.ctx);
 	}
 
 	*r = 0;
diff --git a/arch/x86/lib/cache-smp.c b/arch/x86/lib/cache-smp.c
index 7c48ff4ae8d1..7af743bd3b13 100644
--- a/arch/x86/lib/cache-smp.c
+++ b/arch/x86/lib/cache-smp.c
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <asm/paravirt.h>
 #include <linux/smp.h>
 #include <linux/export.h>
 
diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
index 0e65d00e2339..23f81ca3f06b 100644
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -128,7 +128,7 @@ static void delay_halt_mwaitx(u64 unused, u64 cycles)
 
 	delay = min_t(u64, MWAITX_MAX_WAIT_CYCLES, cycles);
 	/*
-	 * Use cpu_tss_rw as a cacheline-aligned, seldomly accessed per-cpu
+	 * Use cpu_tss_rw as a cacheline-aligned, seldom accessed per-cpu
 	 * variable as the monitor target.
 	 */
 	 __monitorx(raw_cpu_ptr(&cpu_tss_rw), 0, 0);
diff --git a/arch/x86/lib/getuser.S b/arch/x86/lib/getuser.S
index 20ef350a60fb..10d5ed8b5990 100644
--- a/arch/x86/lib/getuser.S
+++ b/arch/x86/lib/getuser.S
@@ -163,23 +163,23 @@ SYM_CODE_END(__get_user_8_handle_exception)
 #endif
 
 /* get_user */
-	_ASM_EXTABLE(1b, __get_user_handle_exception)
-	_ASM_EXTABLE(2b, __get_user_handle_exception)
-	_ASM_EXTABLE(3b, __get_user_handle_exception)
+	_ASM_EXTABLE_UA(1b, __get_user_handle_exception)
+	_ASM_EXTABLE_UA(2b, __get_user_handle_exception)
+	_ASM_EXTABLE_UA(3b, __get_user_handle_exception)
 #ifdef CONFIG_X86_64
-	_ASM_EXTABLE(4b, __get_user_handle_exception)
+	_ASM_EXTABLE_UA(4b, __get_user_handle_exception)
 #else
-	_ASM_EXTABLE(4b, __get_user_8_handle_exception)
-	_ASM_EXTABLE(5b, __get_user_8_handle_exception)
+	_ASM_EXTABLE_UA(4b, __get_user_8_handle_exception)
+	_ASM_EXTABLE_UA(5b, __get_user_8_handle_exception)
 #endif
 
 /* __get_user */
-	_ASM_EXTABLE(6b, __get_user_handle_exception)
-	_ASM_EXTABLE(7b, __get_user_handle_exception)
-	_ASM_EXTABLE(8b, __get_user_handle_exception)
+	_ASM_EXTABLE_UA(6b, __get_user_handle_exception)
+	_ASM_EXTABLE_UA(7b, __get_user_handle_exception)
+	_ASM_EXTABLE_UA(8b, __get_user_handle_exception)
 #ifdef CONFIG_X86_64
-	_ASM_EXTABLE(9b, __get_user_handle_exception)
+	_ASM_EXTABLE_UA(9b, __get_user_handle_exception)
 #else
-	_ASM_EXTABLE(9b, __get_user_8_handle_exception)
-	_ASM_EXTABLE(10b, __get_user_8_handle_exception)
+	_ASM_EXTABLE_UA(9b, __get_user_8_handle_exception)
+	_ASM_EXTABLE_UA(10b, __get_user_8_handle_exception)
 #endif
diff --git a/arch/x86/lib/misc.c b/arch/x86/lib/misc.c
index 92cd8ecc3a2c..40b81c338ae5 100644
--- a/arch/x86/lib/misc.c
+++ b/arch/x86/lib/misc.c
@@ -8,7 +8,7 @@
  */
 int num_digits(int val)
 {
-	int m = 10;
+	long long m = 10;
 	int d = 1;
 
 	if (val < 0) {
diff --git a/arch/x86/lib/putuser.S b/arch/x86/lib/putuser.S
index 2877f5934177..975c9c18263d 100644
--- a/arch/x86/lib/putuser.S
+++ b/arch/x86/lib/putuser.S
@@ -133,15 +133,15 @@ SYM_CODE_START_LOCAL(__put_user_handle_exception)
 	RET
 SYM_CODE_END(__put_user_handle_exception)
 
-	_ASM_EXTABLE(1b, __put_user_handle_exception)
-	_ASM_EXTABLE(2b, __put_user_handle_exception)
-	_ASM_EXTABLE(3b, __put_user_handle_exception)
-	_ASM_EXTABLE(4b, __put_user_handle_exception)
-	_ASM_EXTABLE(5b, __put_user_handle_exception)
-	_ASM_EXTABLE(6b, __put_user_handle_exception)
-	_ASM_EXTABLE(7b, __put_user_handle_exception)
-	_ASM_EXTABLE(9b, __put_user_handle_exception)
+	_ASM_EXTABLE_UA(1b, __put_user_handle_exception)
+	_ASM_EXTABLE_UA(2b, __put_user_handle_exception)
+	_ASM_EXTABLE_UA(3b, __put_user_handle_exception)
+	_ASM_EXTABLE_UA(4b, __put_user_handle_exception)
+	_ASM_EXTABLE_UA(5b, __put_user_handle_exception)
+	_ASM_EXTABLE_UA(6b, __put_user_handle_exception)
+	_ASM_EXTABLE_UA(7b, __put_user_handle_exception)
+	_ASM_EXTABLE_UA(9b, __put_user_handle_exception)
 #ifdef CONFIG_X86_32
-	_ASM_EXTABLE(8b, __put_user_handle_exception)
-	_ASM_EXTABLE(10b, __put_user_handle_exception)
+	_ASM_EXTABLE_UA(8b, __put_user_handle_exception)
+	_ASM_EXTABLE_UA(10b, __put_user_handle_exception)
 #endif
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 679b09cfe241..d6375b3c633b 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -798,15 +798,6 @@ show_signal_msg(struct pt_regs *regs, unsigned long error_code,
 	show_opcodes(regs, loglvl);
 }
 
-/*
- * The (legacy) vsyscall page is the long page in the kernel portion
- * of the address space that has user-accessible permissions.
- */
-static bool is_vsyscall_vaddr(unsigned long vaddr)
-{
-	return unlikely((vaddr & PAGE_MASK) == VSYSCALL_ADDR);
-}
-
 static void
 __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
 		       unsigned long address, u32 pkey, int si_code)
diff --git a/arch/x86/mm/ident_map.c b/arch/x86/mm/ident_map.c
index 968d7005f4a7..f50cc210a981 100644
--- a/arch/x86/mm/ident_map.c
+++ b/arch/x86/mm/ident_map.c
@@ -26,18 +26,31 @@ static int ident_pud_init(struct x86_mapping_info *info, pud_t *pud_page,
 	for (; addr < end; addr = next) {
 		pud_t *pud = pud_page + pud_index(addr);
 		pmd_t *pmd;
+		bool use_gbpage;
 
 		next = (addr & PUD_MASK) + PUD_SIZE;
 		if (next > end)
 			next = end;
 
-		if (info->direct_gbpages) {
-			pud_t pudval;
+		/* if this is already a gbpage, this portion is already mapped */
+		if (pud_large(*pud))
+			continue;
+
+		/* Is using a gbpage allowed? */
+		use_gbpage = info->direct_gbpages;
 
-			if (pud_present(*pud))
-				continue;
+		/* Don't use gbpage if it maps more than the requested region. */
+		/* at the begining: */
+		use_gbpage &= ((addr & ~PUD_MASK) == 0);
+		/* ... or at the end: */
+		use_gbpage &= ((next & ~PUD_MASK) == 0);
+
+		/* Never overwrite existing mappings */
+		use_gbpage &= !pud_present(*pud);
+
+		if (use_gbpage) {
+			pud_t pudval;
 
-			addr &= PUD_MASK;
 			pudval = __pud((addr - info->offset) | info->page_flag);
 			set_pud(pud, pudval);
 			continue;
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index a190aae8ceaf..a0dffaca6d2b 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -1013,7 +1013,7 @@ static void __meminit free_pte_table(pte_t *pte_start, pmd_t *pmd)
 			return;
 	}
 
-	/* free a pte talbe */
+	/* free a pte table */
 	free_pagetable(pmd_page(*pmd), 0);
 	spin_lock(&init_mm.page_table_lock);
 	pmd_clear(pmd);
@@ -1031,7 +1031,7 @@ static void __meminit free_pmd_table(pmd_t *pmd_start, pud_t *pud)
 			return;
 	}
 
-	/* free a pmd talbe */
+	/* free a pmd table */
 	free_pagetable(pud_page(*pud), 0);
 	spin_lock(&init_mm.page_table_lock);
 	pud_clear(pud);
@@ -1049,7 +1049,7 @@ static void __meminit free_pud_table(pud_t *pud_start, p4d_t *p4d)
 			return;
 	}
 
-	/* free a pud talbe */
+	/* free a pud table */
 	free_pagetable(p4d_page(*p4d), 0);
 	spin_lock(&init_mm.page_table_lock);
 	p4d_clear(p4d);
diff --git a/arch/x86/mm/maccess.c b/arch/x86/mm/maccess.c
index 6993f026adec..42115ac079cf 100644
--- a/arch/x86/mm/maccess.c
+++ b/arch/x86/mm/maccess.c
@@ -3,6 +3,8 @@
 #include <linux/uaccess.h>
 #include <linux/kernel.h>
 
+#include <asm/vsyscall.h>
+
 #ifdef CONFIG_X86_64
 bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
 {
@@ -16,6 +18,14 @@ bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
 		return false;
 
 	/*
+	 * Reading from the vsyscall page may cause an unhandled fault in
+	 * certain cases.  Though it is at an address above TASK_SIZE_MAX, it is
+	 * usually considered as a user space address.
+	 */
+	if (is_vsyscall_vaddr(vaddr))
+		return false;
+
+	/*
 	 * Allow everything during early boot before 'x86_virt_bits'
 	 * is initialized.  Needed for instruction decoding in early
 	 * exception handlers.
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index b29ceb19e46e..65e9a6e391c0 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -450,37 +450,6 @@ int __node_distance(int from, int to)
 EXPORT_SYMBOL(__node_distance);
 
 /*
- * Sanity check to catch more bad NUMA configurations (they are amazingly
- * common).  Make sure the nodes cover all memory.
- */
-static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
-{
-	u64 numaram, e820ram;
-	int i;
-
-	numaram = 0;
-	for (i = 0; i < mi->nr_blks; i++) {
-		u64 s = mi->blk[i].start >> PAGE_SHIFT;
-		u64 e = mi->blk[i].end >> PAGE_SHIFT;
-		numaram += e - s;
-		numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e);
-		if ((s64)numaram < 0)
-			numaram = 0;
-	}
-
-	e820ram = max_pfn - absent_pages_in_range(0, max_pfn);
-
-	/* We seem to lose 3 pages somewhere. Allow 1M of slack. */
-	if ((s64)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) {
-		printk(KERN_ERR "NUMA: nodes only cover %LuMB of your %LuMB e820 RAM. Not used.\n",
-		       (numaram << PAGE_SHIFT) >> 20,
-		       (e820ram << PAGE_SHIFT) >> 20);
-		return false;
-	}
-	return true;
-}
-
-/*
  * Mark all currently memblock-reserved physical memory (which covers the
  * kernel's own memory ranges) as hot-unswappable.
  */
@@ -585,7 +554,8 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 			return -EINVAL;
 		}
 	}
-	if (!numa_meminfo_cover_memory(mi))
+
+	if (!memblock_validate_numa_coverage(SZ_1M))
 		return -EINVAL;
 
 	/* Finally register nodes. */
@@ -964,7 +934,7 @@ static int __init cmp_memblk(const void *a, const void *b)
 	const struct numa_memblk *ma = *(const struct numa_memblk **)a;
 	const struct numa_memblk *mb = *(const struct numa_memblk **)b;
 
-	return ma->start - mb->start;
+	return (ma->start > mb->start) - (ma->start < mb->start);
 }
 
 static struct numa_memblk *numa_memblk_list[NR_NODE_MEMBLKS] __initdata;
@@ -974,14 +944,12 @@ static struct numa_memblk *numa_memblk_list[NR_NODE_MEMBLKS] __initdata;
  * @start: address to begin fill
  * @end: address to end fill
  *
- * Find and extend numa_meminfo memblks to cover the @start-@end
- * physical address range, such that the first memblk includes
- * @start, the last memblk includes @end, and any gaps in between
- * are filled.
+ * Find and extend numa_meminfo memblks to cover the physical
+ * address range @start-@end
  *
  * RETURNS:
  * 0		  : Success
- * NUMA_NO_MEMBLK : No memblk exists in @start-@end range
+ * NUMA_NO_MEMBLK : No memblks exist in address range @start-@end
  */
 
 int __init numa_fill_memblks(u64 start, u64 end)
@@ -993,17 +961,14 @@ int __init numa_fill_memblks(u64 start, u64 end)
 
 	/*
 	 * Create a list of pointers to numa_meminfo memblks that
-	 * overlap start, end. Exclude (start == bi->end) since
-	 * end addresses in both a CFMWS range and a memblk range
-	 * are exclusive.
-	 *
-	 * This list of pointers is used to make in-place changes
-	 * that fill out the numa_meminfo memblks.
+	 * overlap start, end. The list is used to make in-place
+	 * changes that fill out the numa_meminfo memblks.
 	 */
 	for (int i = 0; i < mi->nr_blks; i++) {
 		struct numa_memblk *bi = &mi->blk[i];
 
-		if (start < bi->end && end >= bi->start) {
+		if (memblock_addrs_overlap(start, end - start, bi->start,
+					   bi->end - bi->start)) {
 			blk[count] = &mi->blk[i];
 			count++;
 		}
diff --git a/arch/x86/mm/pat/memtype.c b/arch/x86/mm/pat/memtype.c
index de10800cd4dd..0904d7e8e126 100644
--- a/arch/x86/mm/pat/memtype.c
+++ b/arch/x86/mm/pat/memtype.c
@@ -14,7 +14,7 @@
  * memory ranges: uncached, write-combining, write-through, write-protected,
  * and the most commonly used and default attribute: write-back caching.
  *
- * PAT support supercedes and augments MTRR support in a compatible fashion: MTRR is
+ * PAT support supersedes and augments MTRR support in a compatible fashion: MTRR is
  * a hardware interface to enumerate a limited number of physical memory ranges
  * and set their caching attributes explicitly, programmed into the CPU via MSRs.
  * Even modern CPUs have MTRRs enabled - but these are typically not touched
diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c
index bda9f129835e..102880404046 100644
--- a/arch/x86/mm/pat/set_memory.c
+++ b/arch/x86/mm/pat/set_memory.c
@@ -755,10 +755,14 @@ pmd_t *lookup_pmd_address(unsigned long address)
  * areas on 32-bit NUMA systems.  The percpu areas can
  * end up in this kind of memory, for instance.
  *
- * This could be optimized, but it is only intended to be
- * used at initialization time, and keeping it
- * unoptimized should increase the testing coverage for
- * the more obscure platforms.
+ * Note that as long as the PTEs are well-formed with correct PFNs, this
+ * works without checking the PRESENT bit in the leaf PTE.  This is unlike
+ * the similar vmalloc_to_page() and derivatives.  Callers may depend on
+ * this behavior.
+ *
+ * This could be optimized, but it is only used in paths that are not perf
+ * sensitive, and keeping it unoptimized should increase the testing coverage
+ * for the more obscure platforms.
  */
 phys_addr_t slow_virt_to_phys(void *__virt_addr)
 {
@@ -1621,7 +1625,7 @@ repeat:
 
 		/*
 		 * We need to keep the pfn from the existing PTE,
-		 * after all we're only going to change it's attributes
+		 * after all we're only going to change its attributes
 		 * not the memory it points to
 		 */
 		new_pte = pfn_pte(pfn, new_prot);
@@ -2041,17 +2045,12 @@ int set_mce_nospec(unsigned long pfn)
 	return rc;
 }
 
-static int set_memory_p(unsigned long *addr, int numpages)
-{
-	return change_page_attr_set(addr, numpages, __pgprot(_PAGE_PRESENT), 0);
-}
-
 /* Restore full speculative operation to the pfn. */
 int clear_mce_nospec(unsigned long pfn)
 {
 	unsigned long addr = (unsigned long) pfn_to_kaddr(pfn);
 
-	return set_memory_p(&addr, 1);
+	return set_memory_p(addr, 1);
 }
 EXPORT_SYMBOL_GPL(clear_mce_nospec);
 #endif /* CONFIG_X86_64 */
@@ -2104,6 +2103,11 @@ int set_memory_np_noalias(unsigned long addr, int numpages)
 					CPA_NO_CHECK_ALIAS, NULL);
 }
 
+int set_memory_p(unsigned long addr, int numpages)
+{
+	return change_page_attr_set(&addr, numpages, __pgprot(_PAGE_PRESENT), 0);
+}
+
 int set_memory_4k(unsigned long addr, int numpages)
 {
 	return change_page_attr_set_clr(&addr, numpages, __pgprot(0),
@@ -2447,7 +2451,7 @@ int __init kernel_unmap_pages_in_pgd(pgd_t *pgd, unsigned long address,
 	/*
 	 * The typical sequence for unmapping is to find a pte through
 	 * lookup_address_in_pgd() (ideally, it should never return NULL because
-	 * the address is already mapped) and change it's protections. As pfn is
+	 * the address is already mapped) and change its protections. As pfn is
 	 * the *target* of a mapping, it's not useful while unmapping.
 	 */
 	struct cpa_data cpa = {
diff --git a/arch/x86/mm/pti.c b/arch/x86/mm/pti.c
index 5dd733944629..669ba1c345b3 100644
--- a/arch/x86/mm/pti.c
+++ b/arch/x86/mm/pti.c
@@ -6,7 +6,7 @@
  *
  *	https://github.com/IAIK/KAISER
  *
- * The original work was written by and and signed off by for the Linux
+ * The original work was written by and signed off by for the Linux
  * kernel by:
  *
  *   Signed-off-by: Richard Fellner <richard.fellner@student.tugraz.at>
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 453ea95b667d..5768d386efab 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -355,7 +355,7 @@ static void l1d_flush_evaluate(unsigned long prev_mm, unsigned long next_mm,
 
 	/*
 	 * Validate that it is not running on an SMT sibling as this would
-	 * make the excercise pointless because the siblings share L1D. If
+	 * make the exercise pointless because the siblings share L1D. If
 	 * it runs on a SMT sibling, notify it with SIGBUS on return to
 	 * user/guest
 	 */
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index e89e415aa743..919f647c740f 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -17,6 +17,7 @@
 #include <asm/nospec-branch.h>
 #include <asm/text-patching.h>
 #include <asm/unwind.h>
+#include <asm/cfi.h>
 
 static bool all_callee_regs_used[4] = {true, true, true, true};
 
@@ -51,9 +52,11 @@ static u8 *emit_code(u8 *ptr, u32 bytes, unsigned int len)
 	do { EMIT4(b1, b2, b3, b4); EMIT(off, 4); } while (0)
 
 #ifdef CONFIG_X86_KERNEL_IBT
-#define EMIT_ENDBR()	EMIT(gen_endbr(), 4)
+#define EMIT_ENDBR()		EMIT(gen_endbr(), 4)
+#define EMIT_ENDBR_POISON()	EMIT(gen_endbr_poison(), 4)
 #else
 #define EMIT_ENDBR()
+#define EMIT_ENDBR_POISON()
 #endif
 
 static bool is_imm8(int value)
@@ -304,6 +307,88 @@ static void pop_callee_regs(u8 **pprog, bool *callee_regs_used)
 	*pprog = prog;
 }
 
+static void emit_nops(u8 **pprog, int len)
+{
+	u8 *prog = *pprog;
+	int i, noplen;
+
+	while (len > 0) {
+		noplen = len;
+
+		if (noplen > ASM_NOP_MAX)
+			noplen = ASM_NOP_MAX;
+
+		for (i = 0; i < noplen; i++)
+			EMIT1(x86_nops[noplen][i]);
+		len -= noplen;
+	}
+
+	*pprog = prog;
+}
+
+/*
+ * Emit the various CFI preambles, see asm/cfi.h and the comments about FineIBT
+ * in arch/x86/kernel/alternative.c
+ */
+
+static void emit_fineibt(u8 **pprog, u32 hash)
+{
+	u8 *prog = *pprog;
+
+	EMIT_ENDBR();
+	EMIT3_off32(0x41, 0x81, 0xea, hash);		/* subl $hash, %r10d	*/
+	EMIT2(0x74, 0x07);				/* jz.d8 +7		*/
+	EMIT2(0x0f, 0x0b);				/* ud2			*/
+	EMIT1(0x90);					/* nop			*/
+	EMIT_ENDBR_POISON();
+
+	*pprog = prog;
+}
+
+static void emit_kcfi(u8 **pprog, u32 hash)
+{
+	u8 *prog = *pprog;
+
+	EMIT1_off32(0xb8, hash);			/* movl $hash, %eax	*/
+#ifdef CONFIG_CALL_PADDING
+	EMIT1(0x90);
+	EMIT1(0x90);
+	EMIT1(0x90);
+	EMIT1(0x90);
+	EMIT1(0x90);
+	EMIT1(0x90);
+	EMIT1(0x90);
+	EMIT1(0x90);
+	EMIT1(0x90);
+	EMIT1(0x90);
+	EMIT1(0x90);
+#endif
+	EMIT_ENDBR();
+
+	*pprog = prog;
+}
+
+static void emit_cfi(u8 **pprog, u32 hash)
+{
+	u8 *prog = *pprog;
+
+	switch (cfi_mode) {
+	case CFI_FINEIBT:
+		emit_fineibt(&prog, hash);
+		break;
+
+	case CFI_KCFI:
+		emit_kcfi(&prog, hash);
+		break;
+
+	default:
+		EMIT_ENDBR();
+		break;
+	}
+
+	*pprog = prog;
+}
+
 /*
  * Emit x86-64 prologue code for BPF program.
  * bpf_tail_call helper will skip the first X86_TAIL_CALL_OFFSET bytes
@@ -315,12 +400,11 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf,
 {
 	u8 *prog = *pprog;
 
+	emit_cfi(&prog, is_subprog ? cfi_bpf_subprog_hash : cfi_bpf_hash);
 	/* BPF trampoline can be made to work without these nops,
 	 * but let's waste 5 bytes for now and optimize later
 	 */
-	EMIT_ENDBR();
-	memcpy(prog, x86_nops[5], X86_PATCH_SIZE);
-	prog += X86_PATCH_SIZE;
+	emit_nops(&prog, X86_PATCH_SIZE);
 	if (!ebpf_from_cbpf) {
 		if (tail_call_reachable && !is_subprog)
 			/* When it's the entry of the whole tailcall context,
@@ -626,8 +710,7 @@ static void emit_bpf_tail_call_direct(struct bpf_prog *bpf_prog,
 	if (stack_depth)
 		EMIT3_off32(0x48, 0x81, 0xC4, round_up(stack_depth, 8));
 
-	memcpy(prog, x86_nops[5], X86_PATCH_SIZE);
-	prog += X86_PATCH_SIZE;
+	emit_nops(&prog, X86_PATCH_SIZE);
 
 	/* out: */
 	ctx->tail_call_direct_label = prog - start;
@@ -989,25 +1072,6 @@ static void detect_reg_usage(struct bpf_insn *insn, int insn_cnt,
 	}
 }
 
-static void emit_nops(u8 **pprog, int len)
-{
-	u8 *prog = *pprog;
-	int i, noplen;
-
-	while (len > 0) {
-		noplen = len;
-
-		if (noplen > ASM_NOP_MAX)
-			noplen = ASM_NOP_MAX;
-
-		for (i = 0; i < noplen; i++)
-			EMIT1(x86_nops[noplen][i]);
-		len -= noplen;
-	}
-
-	*pprog = prog;
-}
-
 /* emit the 3-byte VEX prefix
  *
  * r: same as rex.r, extra bit for ModRM reg field
@@ -2143,7 +2207,7 @@ static void save_args(const struct btf_func_model *m, u8 **prog,
 		} else {
 			/* Only copy the arguments on-stack to current
 			 * 'stack_size' and ignore the regs, used to
-			 * prepare the arguments on-stack for orign call.
+			 * prepare the arguments on-stack for origin call.
 			 */
 			if (for_call_origin) {
 				nr_regs += arg_regs;
@@ -2198,7 +2262,8 @@ static void restore_regs(const struct btf_func_model *m, u8 **prog,
 
 static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog,
 			   struct bpf_tramp_link *l, int stack_size,
-			   int run_ctx_off, bool save_ret)
+			   int run_ctx_off, bool save_ret,
+			   void *image, void *rw_image)
 {
 	u8 *prog = *pprog;
 	u8 *jmp_insn;
@@ -2226,7 +2291,7 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog,
 	else
 		EMIT4(0x48, 0x8D, 0x75, -run_ctx_off);
 
-	if (emit_rsb_call(&prog, bpf_trampoline_enter(p), prog))
+	if (emit_rsb_call(&prog, bpf_trampoline_enter(p), image + (prog - (u8 *)rw_image)))
 		return -EINVAL;
 	/* remember prog start time returned by __bpf_prog_enter */
 	emit_mov_reg(&prog, true, BPF_REG_6, BPF_REG_0);
@@ -2250,7 +2315,7 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog,
 			       (long) p->insnsi >> 32,
 			       (u32) (long) p->insnsi);
 	/* call JITed bpf program or interpreter */
-	if (emit_rsb_call(&prog, p->bpf_func, prog))
+	if (emit_rsb_call(&prog, p->bpf_func, image + (prog - (u8 *)rw_image)))
 		return -EINVAL;
 
 	/*
@@ -2277,7 +2342,7 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog,
 		EMIT3_off32(0x48, 0x8D, 0x95, -run_ctx_off);
 	else
 		EMIT4(0x48, 0x8D, 0x55, -run_ctx_off);
-	if (emit_rsb_call(&prog, bpf_trampoline_exit(p), prog))
+	if (emit_rsb_call(&prog, bpf_trampoline_exit(p), image + (prog - (u8 *)rw_image)))
 		return -EINVAL;
 
 	*pprog = prog;
@@ -2312,14 +2377,15 @@ static int emit_cond_near_jump(u8 **pprog, void *func, void *ip, u8 jmp_cond)
 
 static int invoke_bpf(const struct btf_func_model *m, u8 **pprog,
 		      struct bpf_tramp_links *tl, int stack_size,
-		      int run_ctx_off, bool save_ret)
+		      int run_ctx_off, bool save_ret,
+		      void *image, void *rw_image)
 {
 	int i;
 	u8 *prog = *pprog;
 
 	for (i = 0; i < tl->nr_links; i++) {
 		if (invoke_bpf_prog(m, &prog, tl->links[i], stack_size,
-				    run_ctx_off, save_ret))
+				    run_ctx_off, save_ret, image, rw_image))
 			return -EINVAL;
 	}
 	*pprog = prog;
@@ -2328,7 +2394,8 @@ static int invoke_bpf(const struct btf_func_model *m, u8 **pprog,
 
 static int invoke_bpf_mod_ret(const struct btf_func_model *m, u8 **pprog,
 			      struct bpf_tramp_links *tl, int stack_size,
-			      int run_ctx_off, u8 **branches)
+			      int run_ctx_off, u8 **branches,
+			      void *image, void *rw_image)
 {
 	u8 *prog = *pprog;
 	int i;
@@ -2339,7 +2406,8 @@ static int invoke_bpf_mod_ret(const struct btf_func_model *m, u8 **pprog,
 	emit_mov_imm32(&prog, false, BPF_REG_0, 0);
 	emit_stx(&prog, BPF_DW, BPF_REG_FP, BPF_REG_0, -8);
 	for (i = 0; i < tl->nr_links; i++) {
-		if (invoke_bpf_prog(m, &prog, tl->links[i], stack_size, run_ctx_off, true))
+		if (invoke_bpf_prog(m, &prog, tl->links[i], stack_size, run_ctx_off, true,
+				    image, rw_image))
 			return -EINVAL;
 
 		/* mod_ret prog stored return value into [rbp - 8]. Emit:
@@ -2422,10 +2490,11 @@ static int invoke_bpf_mod_ret(const struct btf_func_model *m, u8 **pprog,
  * add rsp, 8                      // skip eth_type_trans's frame
  * ret                             // return to its caller
  */
-int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *image_end,
-				const struct btf_func_model *m, u32 flags,
-				struct bpf_tramp_links *tlinks,
-				void *func_addr)
+static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *rw_image,
+					 void *rw_image_end, void *image,
+					 const struct btf_func_model *m, u32 flags,
+					 struct bpf_tramp_links *tlinks,
+					 void *func_addr)
 {
 	int i, ret, nr_regs = m->nr_args, stack_size = 0;
 	int regs_off, nregs_off, ip_off, run_ctx_off, arg_stack_off, rbx_off;
@@ -2437,10 +2506,19 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i
 	u8 *prog;
 	bool save_ret;
 
+	/*
+	 * F_INDIRECT is only compatible with F_RET_FENTRY_RET, it is
+	 * explicitly incompatible with F_CALL_ORIG | F_SKIP_FRAME | F_IP_ARG
+	 * because @func_addr.
+	 */
+	WARN_ON_ONCE((flags & BPF_TRAMP_F_INDIRECT) &&
+		     (flags & ~(BPF_TRAMP_F_INDIRECT | BPF_TRAMP_F_RET_FENTRY_RET)));
+
 	/* extra registers for struct arguments */
-	for (i = 0; i < m->nr_args; i++)
+	for (i = 0; i < m->nr_args; i++) {
 		if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG)
 			nr_regs += (m->arg_size[i] + 7) / 8 - 1;
+	}
 
 	/* x86-64 supports up to MAX_BPF_FUNC_ARGS arguments. 1-6
 	 * are passed through regs, the remains are through stack.
@@ -2521,22 +2599,29 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i
 		orig_call += X86_PATCH_SIZE;
 	}
 
-	prog = image;
+	prog = rw_image;
 
-	EMIT_ENDBR();
-	/*
-	 * This is the direct-call trampoline, as such it needs accounting
-	 * for the __fentry__ call.
-	 */
-	x86_call_depth_emit_accounting(&prog, NULL);
+	if (flags & BPF_TRAMP_F_INDIRECT) {
+		/*
+		 * Indirect call for bpf_struct_ops
+		 */
+		emit_cfi(&prog, cfi_get_func_hash(func_addr));
+	} else {
+		/*
+		 * Direct-call fentry stub, as such it needs accounting for the
+		 * __fentry__ call.
+		 */
+		x86_call_depth_emit_accounting(&prog, NULL);
+	}
 	EMIT1(0x55);		 /* push rbp */
 	EMIT3(0x48, 0x89, 0xE5); /* mov rbp, rsp */
-	if (!is_imm8(stack_size))
+	if (!is_imm8(stack_size)) {
 		/* sub rsp, stack_size */
 		EMIT3_off32(0x48, 0x81, 0xEC, stack_size);
-	else
+	} else {
 		/* sub rsp, stack_size */
 		EMIT4(0x48, 0x83, 0xEC, stack_size);
+	}
 	if (flags & BPF_TRAMP_F_TAIL_CALL_CTX)
 		EMIT1(0x50);		/* push rax */
 	/* mov QWORD PTR [rbp - rbx_off], rbx */
@@ -2563,16 +2648,18 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i
 	if (flags & BPF_TRAMP_F_CALL_ORIG) {
 		/* arg1: mov rdi, im */
 		emit_mov_imm64(&prog, BPF_REG_1, (long) im >> 32, (u32) (long) im);
-		if (emit_rsb_call(&prog, __bpf_tramp_enter, prog)) {
+		if (emit_rsb_call(&prog, __bpf_tramp_enter,
+				  image + (prog - (u8 *)rw_image))) {
 			ret = -EINVAL;
 			goto cleanup;
 		}
 	}
 
-	if (fentry->nr_links)
+	if (fentry->nr_links) {
 		if (invoke_bpf(m, &prog, fentry, regs_off, run_ctx_off,
-			       flags & BPF_TRAMP_F_RET_FENTRY_RET))
+			       flags & BPF_TRAMP_F_RET_FENTRY_RET, image, rw_image))
 			return -EINVAL;
+	}
 
 	if (fmod_ret->nr_links) {
 		branches = kcalloc(fmod_ret->nr_links, sizeof(u8 *),
@@ -2581,7 +2668,7 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i
 			return -ENOMEM;
 
 		if (invoke_bpf_mod_ret(m, &prog, fmod_ret, regs_off,
-				       run_ctx_off, branches)) {
+				       run_ctx_off, branches, image, rw_image)) {
 			ret = -EINVAL;
 			goto cleanup;
 		}
@@ -2591,27 +2678,27 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i
 		restore_regs(m, &prog, regs_off);
 		save_args(m, &prog, arg_stack_off, true);
 
-		if (flags & BPF_TRAMP_F_TAIL_CALL_CTX)
+		if (flags & BPF_TRAMP_F_TAIL_CALL_CTX) {
 			/* Before calling the original function, restore the
 			 * tail_call_cnt from stack to rax.
 			 */
 			RESTORE_TAIL_CALL_CNT(stack_size);
+		}
 
 		if (flags & BPF_TRAMP_F_ORIG_STACK) {
 			emit_ldx(&prog, BPF_DW, BPF_REG_6, BPF_REG_FP, 8);
 			EMIT2(0xff, 0xd3); /* call *rbx */
 		} else {
 			/* call original function */
-			if (emit_rsb_call(&prog, orig_call, prog)) {
+			if (emit_rsb_call(&prog, orig_call, image + (prog - (u8 *)rw_image))) {
 				ret = -EINVAL;
 				goto cleanup;
 			}
 		}
 		/* remember return value in a stack for bpf prog to access */
 		emit_stx(&prog, BPF_DW, BPF_REG_FP, BPF_REG_0, -8);
-		im->ip_after_call = prog;
-		memcpy(prog, x86_nops[5], X86_PATCH_SIZE);
-		prog += X86_PATCH_SIZE;
+		im->ip_after_call = image + (prog - (u8 *)rw_image);
+		emit_nops(&prog, X86_PATCH_SIZE);
 	}
 
 	if (fmod_ret->nr_links) {
@@ -2624,16 +2711,19 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i
 		/* Update the branches saved in invoke_bpf_mod_ret with the
 		 * aligned address of do_fexit.
 		 */
-		for (i = 0; i < fmod_ret->nr_links; i++)
-			emit_cond_near_jump(&branches[i], prog, branches[i],
-					    X86_JNE);
+		for (i = 0; i < fmod_ret->nr_links; i++) {
+			emit_cond_near_jump(&branches[i], image + (prog - (u8 *)rw_image),
+					    image + (branches[i] - (u8 *)rw_image), X86_JNE);
+		}
 	}
 
-	if (fexit->nr_links)
-		if (invoke_bpf(m, &prog, fexit, regs_off, run_ctx_off, false)) {
+	if (fexit->nr_links) {
+		if (invoke_bpf(m, &prog, fexit, regs_off, run_ctx_off,
+			       false, image, rw_image)) {
 			ret = -EINVAL;
 			goto cleanup;
 		}
+	}
 
 	if (flags & BPF_TRAMP_F_RESTORE_REGS)
 		restore_regs(m, &prog, regs_off);
@@ -2643,18 +2733,19 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i
 	 * restored to R0.
 	 */
 	if (flags & BPF_TRAMP_F_CALL_ORIG) {
-		im->ip_epilogue = prog;
+		im->ip_epilogue = image + (prog - (u8 *)rw_image);
 		/* arg1: mov rdi, im */
 		emit_mov_imm64(&prog, BPF_REG_1, (long) im >> 32, (u32) (long) im);
-		if (emit_rsb_call(&prog, __bpf_tramp_exit, prog)) {
+		if (emit_rsb_call(&prog, __bpf_tramp_exit, image + (prog - (u8 *)rw_image))) {
 			ret = -EINVAL;
 			goto cleanup;
 		}
-	} else if (flags & BPF_TRAMP_F_TAIL_CALL_CTX)
+	} else if (flags & BPF_TRAMP_F_TAIL_CALL_CTX) {
 		/* Before running the original function, restore the
 		 * tail_call_cnt from stack to rax.
 		 */
 		RESTORE_TAIL_CALL_CNT(stack_size);
+	}
 
 	/* restore return value of orig_call or fentry prog back into RAX */
 	if (save_ret)
@@ -2662,22 +2753,94 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i
 
 	emit_ldx(&prog, BPF_DW, BPF_REG_6, BPF_REG_FP, -rbx_off);
 	EMIT1(0xC9); /* leave */
-	if (flags & BPF_TRAMP_F_SKIP_FRAME)
+	if (flags & BPF_TRAMP_F_SKIP_FRAME) {
 		/* skip our return address and return to parent */
 		EMIT4(0x48, 0x83, 0xC4, 8); /* add rsp, 8 */
-	emit_return(&prog, prog);
+	}
+	emit_return(&prog, image + (prog - (u8 *)rw_image));
 	/* Make sure the trampoline generation logic doesn't overflow */
-	if (WARN_ON_ONCE(prog > (u8 *)image_end - BPF_INSN_SAFETY)) {
+	if (WARN_ON_ONCE(prog > (u8 *)rw_image_end - BPF_INSN_SAFETY)) {
 		ret = -EFAULT;
 		goto cleanup;
 	}
-	ret = prog - (u8 *)image;
+	ret = prog - (u8 *)rw_image + BPF_INSN_SAFETY;
 
 cleanup:
 	kfree(branches);
 	return ret;
 }
 
+void *arch_alloc_bpf_trampoline(unsigned int size)
+{
+	return bpf_prog_pack_alloc(size, jit_fill_hole);
+}
+
+void arch_free_bpf_trampoline(void *image, unsigned int size)
+{
+	bpf_prog_pack_free(image, size);
+}
+
+void arch_protect_bpf_trampoline(void *image, unsigned int size)
+{
+}
+
+void arch_unprotect_bpf_trampoline(void *image, unsigned int size)
+{
+}
+
+int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *image_end,
+				const struct btf_func_model *m, u32 flags,
+				struct bpf_tramp_links *tlinks,
+				void *func_addr)
+{
+	void *rw_image, *tmp;
+	int ret;
+	u32 size = image_end - image;
+
+	/* rw_image doesn't need to be in module memory range, so we can
+	 * use kvmalloc.
+	 */
+	rw_image = kvmalloc(size, GFP_KERNEL);
+	if (!rw_image)
+		return -ENOMEM;
+
+	ret = __arch_prepare_bpf_trampoline(im, rw_image, rw_image + size, image, m,
+					    flags, tlinks, func_addr);
+	if (ret < 0)
+		goto out;
+
+	tmp = bpf_arch_text_copy(image, rw_image, size);
+	if (IS_ERR(tmp))
+		ret = PTR_ERR(tmp);
+out:
+	kvfree(rw_image);
+	return ret;
+}
+
+int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags,
+			     struct bpf_tramp_links *tlinks, void *func_addr)
+{
+	struct bpf_tramp_image im;
+	void *image;
+	int ret;
+
+	/* Allocate a temporary buffer for __arch_prepare_bpf_trampoline().
+	 * This will NOT cause fragmentation in direct map, as we do not
+	 * call set_memory_*() on this buffer.
+	 *
+	 * We cannot use kvmalloc here, because we need image to be in
+	 * module memory range.
+	 */
+	image = bpf_jit_alloc_exec(PAGE_SIZE);
+	if (!image)
+		return -ENOMEM;
+
+	ret = __arch_prepare_bpf_trampoline(&im, image, image + PAGE_SIZE, image,
+					    m, flags, tlinks, func_addr);
+	bpf_jit_free_exec(image);
+	return ret;
+}
+
 static int emit_bpf_dispatcher(u8 **pprog, int a, int b, s64 *progs, u8 *image, u8 *buf)
 {
 	u8 *jg_reloc, *prog = *pprog;
@@ -2935,9 +3098,16 @@ out_image:
 			jit_data->header = header;
 			jit_data->rw_header = rw_header;
 		}
-		prog->bpf_func = (void *)image;
+		/*
+		 * ctx.prog_offset is used when CFI preambles put code *before*
+		 * the function. See emit_cfi(). For FineIBT specifically this code
+		 * can also be executed and bpf_prog_kallsyms_add() will
+		 * generate an additional symbol to cover this, hence also
+		 * decrement proglen.
+		 */
+		prog->bpf_func = (void *)image + cfi_get_offset();
 		prog->jited = 1;
-		prog->jited_len = proglen;
+		prog->jited_len = proglen - cfi_get_offset();
 	} else {
 		prog = orig_prog;
 	}
@@ -2992,6 +3162,7 @@ void bpf_jit_free(struct bpf_prog *prog)
 			kvfree(jit_data->addrs);
 			kfree(jit_data);
 		}
+		prog->bpf_func = (void *)prog->bpf_func - cfi_get_offset();
 		hdr = bpf_jit_binary_pack_hdr(prog);
 		bpf_jit_binary_pack_free(hdr, NULL);
 		WARN_ON_ONCE(!bpf_prog_kallsyms_verify_off(prog));
diff --git a/arch/x86/net/bpf_jit_comp32.c b/arch/x86/net/bpf_jit_comp32.c
index 429a89c5468b..b18ce19981ec 100644
--- a/arch/x86/net/bpf_jit_comp32.c
+++ b/arch/x86/net/bpf_jit_comp32.c
@@ -1194,7 +1194,7 @@ struct jit_context {
 #define PROLOGUE_SIZE 35
 
 /*
- * Emit prologue code for BPF program and check it's size.
+ * Emit prologue code for BPF program and check its size.
  * bpf_tail_call helper will skip it while jumping into another program.
  */
 static void emit_prologue(u8 **pprog, u32 stack_depth)
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index ea2eb2ec90e2..55c4b07ec1f6 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -283,6 +283,9 @@ static int setup_mcfg_map(struct acpi_pci_root_info *ci)
 	info->mcfg_added = false;
 	seg = info->sd.domain;
 
+	dev_dbg(dev, "%s(%04x %pR ECAM %pa)\n", __func__, seg,
+		&root->secondary, &root->mcfg_addr);
+
 	/* return success if MMCFG is not in use */
 	if (raw_pci_ext_ops && raw_pci_ext_ops != &pci_mmcfg)
 		return 0;
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 4b3efaa82ab7..0cc9520666ef 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * mmconfig-shared.c - Low-level direct PCI config space access via
- *                     MMCONFIG - common code between i386 and x86-64.
+ * Low-level direct PCI config space access via ECAM - common code between
+ * i386 and x86-64.
  *
  * This code does:
  * - known chipset handling
@@ -11,6 +11,8 @@
  * themselves.
  */
 
+#define pr_fmt(fmt) "PCI: " fmt
+
 #include <linux/acpi.h>
 #include <linux/efi.h>
 #include <linux/pci.h>
@@ -24,9 +26,7 @@
 #include <asm/pci_x86.h>
 #include <asm/acpi.h>
 
-#define PREFIX "PCI: "
-
-/* Indicate if the mmcfg resources have been placed into the resource table. */
+/* Indicate if the ECAM resources have been placed into the resource table */
 static bool pci_mmcfg_running_state;
 static bool pci_mmcfg_arch_init_failed;
 static DEFINE_MUTEX(pci_mmcfg_lock);
@@ -90,7 +90,7 @@ static struct pci_mmcfg_region *pci_mmconfig_alloc(int segment, int start,
 	res->end = addr + PCI_MMCFG_BUS_OFFSET(end + 1) - 1;
 	res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 	snprintf(new->name, PCI_MMCFG_RESOURCE_NAME_LEN,
-		 "PCI MMCONFIG %04x [bus %02x-%02x]", segment, start, end);
+		 "PCI ECAM %04x [bus %02x-%02x]", segment, start, end);
 	res->name = new->name;
 
 	return new;
@@ -102,16 +102,15 @@ struct pci_mmcfg_region *__init pci_mmconfig_add(int segment, int start,
 	struct pci_mmcfg_region *new;
 
 	new = pci_mmconfig_alloc(segment, start, end, addr);
-	if (new) {
-		mutex_lock(&pci_mmcfg_lock);
-		list_add_sorted(new);
-		mutex_unlock(&pci_mmcfg_lock);
+	if (!new)
+		return NULL;
 
-		pr_info(PREFIX
-		       "MMCONFIG for domain %04x [bus %02x-%02x] at %pR "
-		       "(base %#lx)\n",
-		       segment, start, end, &new->res, (unsigned long)addr);
-	}
+	mutex_lock(&pci_mmcfg_lock);
+	list_add_sorted(new);
+	mutex_unlock(&pci_mmcfg_lock);
+
+	pr_info("ECAM %pR (base %#lx) for domain %04x [bus %02x-%02x]\n",
+		&new->res, (unsigned long)addr, segment, start, end);
 
 	return new;
 }
@@ -205,7 +204,7 @@ static const char *__init pci_mmcfg_amd_fam10h(void)
 	msr <<= 32;
 	msr |= low;
 
-	/* mmconfig is not enable */
+	/* ECAM is not enabled */
 	if (!(msr & FAM10H_MMIO_CONF_ENABLE))
 		return NULL;
 
@@ -367,7 +366,7 @@ static int __init pci_mmcfg_check_hostbridge(void)
 			name = pci_mmcfg_probes[i].probe();
 
 		if (name)
-			pr_info(PREFIX "%s with MMCONFIG support\n", name);
+			pr_info("%s with ECAM support\n", name);
 	}
 
 	/* some end_bus_number is crazy, fix it */
@@ -443,9 +442,11 @@ static bool is_acpi_reserved(u64 start, u64 end, enum e820_type not_used)
 	return mcfg_res.flags;
 }
 
-static bool is_efi_mmio(u64 start, u64 end, enum e820_type not_used)
+static bool is_efi_mmio(struct resource *res)
 {
 #ifdef CONFIG_EFI
+	u64 start = res->start;
+	u64 end = res->start + resource_size(res);
 	efi_memory_desc_t *md;
 	u64 size, mmio_start, mmio_end;
 
@@ -455,11 +456,6 @@ static bool is_efi_mmio(u64 start, u64 end, enum e820_type not_used)
 			mmio_start = md->phys_addr;
 			mmio_end = mmio_start + size;
 
-			/*
-			 * N.B. Caller supplies (start, start + size),
-			 * so to match, mmio_end is the first address
-			 * *past* the EFI_MEMORY_MAPPED_IO area.
-			 */
 			if (mmio_start <= start && end <= mmio_end)
 				return true;
 		}
@@ -490,11 +486,10 @@ static bool __ref is_mmconf_reserved(check_reserved_t is_reserved,
 		return false;
 
 	if (dev)
-		dev_info(dev, "MMCONFIG at %pR reserved as %s\n",
+		dev_info(dev, "ECAM %pR reserved as %s\n",
 			 &cfg->res, method);
 	else
-		pr_info(PREFIX "MMCONFIG at %pR reserved as %s\n",
-		       &cfg->res, method);
+		pr_info("ECAM %pR reserved as %s\n", &cfg->res, method);
 
 	if (old_size != size) {
 		/* update end_bus */
@@ -503,47 +498,51 @@ static bool __ref is_mmconf_reserved(check_reserved_t is_reserved,
 		cfg->res.end = cfg->res.start +
 		    PCI_MMCFG_BUS_OFFSET(num_buses) - 1;
 		snprintf(cfg->name, PCI_MMCFG_RESOURCE_NAME_LEN,
-			 "PCI MMCONFIG %04x [bus %02x-%02x]",
+			 "PCI ECAM %04x [bus %02x-%02x]",
 			 cfg->segment, cfg->start_bus, cfg->end_bus);
 
 		if (dev)
-			dev_info(dev,
-				"MMCONFIG "
-				"at %pR (base %#lx) (size reduced!)\n",
-				&cfg->res, (unsigned long) cfg->address);
+			dev_info(dev, "ECAM %pR (base %#lx) (size reduced!)\n",
+				 &cfg->res, (unsigned long) cfg->address);
 		else
-			pr_info(PREFIX
-				"MMCONFIG for %04x [bus%02x-%02x] "
-				"at %pR (base %#lx) (size reduced!)\n",
-				cfg->segment, cfg->start_bus, cfg->end_bus,
-				&cfg->res, (unsigned long) cfg->address);
+			pr_info("ECAM %pR (base %#lx) for %04x [bus%02x-%02x] (size reduced!)\n",
+				&cfg->res, (unsigned long) cfg->address,
+				cfg->segment, cfg->start_bus, cfg->end_bus);
 	}
 
 	return true;
 }
 
-static bool __ref
-pci_mmcfg_check_reserved(struct device *dev, struct pci_mmcfg_region *cfg, int early)
+static bool __ref pci_mmcfg_reserved(struct device *dev,
+				     struct pci_mmcfg_region *cfg, int early)
 {
+	struct resource *conflict;
+
 	if (!early && !acpi_disabled) {
 		if (is_mmconf_reserved(is_acpi_reserved, cfg, dev,
 				       "ACPI motherboard resource"))
 			return true;
 
 		if (dev)
-			dev_info(dev, FW_INFO
-				 "MMCONFIG at %pR not reserved in "
-				 "ACPI motherboard resources\n",
+			dev_info(dev, FW_INFO "ECAM %pR not reserved in ACPI motherboard resources\n",
 				 &cfg->res);
 		else
-			pr_info(FW_INFO PREFIX
-			       "MMCONFIG at %pR not reserved in "
-			       "ACPI motherboard resources\n",
-			       &cfg->res);
-
-		if (is_mmconf_reserved(is_efi_mmio, cfg, dev,
-				       "EfiMemoryMappedIO"))
+			pr_info(FW_INFO "ECAM %pR not reserved in ACPI motherboard resources\n",
+			        &cfg->res);
+
+		if (is_efi_mmio(&cfg->res)) {
+			pr_info("ECAM %pR is EfiMemoryMappedIO; assuming valid\n",
+				&cfg->res);
+			conflict = insert_resource_conflict(&iomem_resource,
+							    &cfg->res);
+			if (conflict)
+				pr_warn("ECAM %pR conflicts with %s %pR\n",
+					&cfg->res, conflict->name, conflict);
+			else
+				pr_info("ECAM %pR reserved to work around lack of ACPI motherboard _CRS\n",
+					&cfg->res);
 			return true;
+		}
 	}
 
 	/*
@@ -569,30 +568,31 @@ static void __init pci_mmcfg_reject_broken(int early)
 	struct pci_mmcfg_region *cfg;
 
 	list_for_each_entry(cfg, &pci_mmcfg_list, list) {
-		if (pci_mmcfg_check_reserved(NULL, cfg, early) == 0) {
-			pr_info(PREFIX "not using MMCONFIG\n");
+		if (!pci_mmcfg_reserved(NULL, cfg, early)) {
+			pr_info("not using ECAM (%pR not reserved)\n",
+				&cfg->res);
 			free_all_mmcfg();
 			return;
 		}
 	}
 }
 
-static int __init acpi_mcfg_check_entry(struct acpi_table_mcfg *mcfg,
-					struct acpi_mcfg_allocation *cfg)
+static bool __init acpi_mcfg_valid_entry(struct acpi_table_mcfg *mcfg,
+					 struct acpi_mcfg_allocation *cfg)
 {
 	if (cfg->address < 0xFFFFFFFF)
-		return 0;
+		return true;
 
 	if (!strncmp(mcfg->header.oem_id, "SGI", 3))
-		return 0;
+		return true;
 
 	if ((mcfg->header.revision >= 1) && (dmi_get_bios_year() >= 2010))
-		return 0;
+		return true;
 
-	pr_err(PREFIX "MCFG region for %04x [bus %02x-%02x] at %#llx "
-	       "is above 4GB, ignored\n", cfg->pci_segment,
-	       cfg->start_bus_number, cfg->end_bus_number, cfg->address);
-	return -EINVAL;
+	pr_err("ECAM at %#llx for %04x [bus %02x-%02x] is above 4GB, ignored\n",
+	       cfg->address, cfg->pci_segment, cfg->start_bus_number,
+	       cfg->end_bus_number);
+	return false;
 }
 
 static int __init pci_parse_mcfg(struct acpi_table_header *header)
@@ -616,21 +616,21 @@ static int __init pci_parse_mcfg(struct acpi_table_header *header)
 		i -= sizeof(struct acpi_mcfg_allocation);
 	}
 	if (entries == 0) {
-		pr_err(PREFIX "MMCONFIG has no entries\n");
+		pr_err("MCFG has no entries\n");
 		return -ENODEV;
 	}
 
 	cfg_table = (struct acpi_mcfg_allocation *) &mcfg[1];
 	for (i = 0; i < entries; i++) {
 		cfg = &cfg_table[i];
-		if (acpi_mcfg_check_entry(mcfg, cfg)) {
+		if (!acpi_mcfg_valid_entry(mcfg, cfg)) {
 			free_all_mmcfg();
 			return -ENODEV;
 		}
 
 		if (pci_mmconfig_add(cfg->pci_segment, cfg->start_bus_number,
 				   cfg->end_bus_number, cfg->address) == NULL) {
-			pr_warn(PREFIX "no memory for MCFG entries\n");
+			pr_warn("no memory for MCFG entries\n");
 			free_all_mmcfg();
 			return -ENOMEM;
 		}
@@ -667,6 +667,8 @@ static int pci_mmcfg_for_each_region(int (*func)(__u64 start, __u64 size,
 
 static void __init __pci_mmcfg_init(int early)
 {
+	pr_debug("%s(%s)\n", __func__, early ? "early" : "late");
+
 	pci_mmcfg_reject_broken(early);
 	if (list_empty(&pci_mmcfg_list))
 		return;
@@ -693,6 +695,8 @@ static int __initdata known_bridge;
 
 void __init pci_mmcfg_early_init(void)
 {
+	pr_debug("%s() pci_probe %#x\n", __func__, pci_probe);
+
 	if (pci_probe & PCI_PROBE_MMCONF) {
 		if (pci_mmcfg_check_hostbridge())
 			known_bridge = 1;
@@ -706,14 +710,16 @@ void __init pci_mmcfg_early_init(void)
 
 void __init pci_mmcfg_late_init(void)
 {
-	/* MMCONFIG disabled */
+	pr_debug("%s() pci_probe %#x\n", __func__, pci_probe);
+
+	/* ECAM disabled */
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
 		return;
 
 	if (known_bridge)
 		return;
 
-	/* MMCONFIG hasn't been enabled yet, try again */
+	/* ECAM hasn't been enabled yet, try again */
 	if (pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF) {
 		acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
 		__pci_mmcfg_init(0);
@@ -726,7 +732,9 @@ static int __init pci_mmcfg_late_insert_resources(void)
 
 	pci_mmcfg_running_state = true;
 
-	/* If we are not using MMCONFIG, don't insert the resources. */
+	pr_debug("%s() pci_probe %#x\n", __func__, pci_probe);
+
+	/* If we are not using ECAM, don't insert the resources. */
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
 		return 1;
 
@@ -735,21 +743,24 @@ static int __init pci_mmcfg_late_insert_resources(void)
 	 * marked so it won't cause request errors when __request_region is
 	 * called.
 	 */
-	list_for_each_entry(cfg, &pci_mmcfg_list, list)
-		if (!cfg->res.parent)
+	list_for_each_entry(cfg, &pci_mmcfg_list, list) {
+		if (!cfg->res.parent) {
+			pr_debug("%s() insert %pR\n", __func__, &cfg->res);
 			insert_resource(&iomem_resource, &cfg->res);
+		}
+	}
 
 	return 0;
 }
 
 /*
- * Perform MMCONFIG resource insertion after PCI initialization to allow for
+ * Perform ECAM resource insertion after PCI initialization to allow for
  * misprogrammed MCFG tables that state larger sizes but actually conflict
  * with other system resources.
  */
 late_initcall(pci_mmcfg_late_insert_resources);
 
-/* Add MMCFG information for host bridges */
+/* Add ECAM information for host bridges */
 int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
 			phys_addr_t addr)
 {
@@ -757,6 +768,8 @@ int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
 	struct resource *tmp = NULL;
 	struct pci_mmcfg_region *cfg;
 
+	dev_dbg(dev, "%s(%04x [bus %02x-%02x])\n", __func__, seg, start, end);
+
 	if (!(pci_probe & PCI_PROBE_MMCONF) || pci_mmcfg_arch_init_failed)
 		return -ENODEV;
 
@@ -767,15 +780,17 @@ int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
 	cfg = pci_mmconfig_lookup(seg, start);
 	if (cfg) {
 		if (cfg->end_bus < end)
-			dev_info(dev, FW_INFO
-				 "MMCONFIG for "
-				 "domain %04x [bus %02x-%02x] "
-				 "only partially covers this bridge\n",
-				  cfg->segment, cfg->start_bus, cfg->end_bus);
+			dev_info(dev, FW_INFO "ECAM %pR for domain %04x [bus %02x-%02x] only partially covers this bridge\n",
+				 &cfg->res, cfg->segment, cfg->start_bus,
+				 cfg->end_bus);
 		mutex_unlock(&pci_mmcfg_lock);
 		return -EEXIST;
 	}
 
+	/*
+	 * Don't move earlier; we must return -EEXIST, not -EINVAL, if
+	 * pci_mmconfig_lookup() finds something
+	 */
 	if (!addr) {
 		mutex_unlock(&pci_mmcfg_lock);
 		return -EINVAL;
@@ -784,10 +799,10 @@ int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
 	rc = -EBUSY;
 	cfg = pci_mmconfig_alloc(seg, start, end, addr);
 	if (cfg == NULL) {
-		dev_warn(dev, "fail to add MMCONFIG (out of memory)\n");
+		dev_warn(dev, "fail to add ECAM (out of memory)\n");
 		rc = -ENOMEM;
-	} else if (!pci_mmcfg_check_reserved(dev, cfg, 0)) {
-		dev_warn(dev, FW_BUG "MMCONFIG %pR isn't reserved\n",
+	} else if (!pci_mmcfg_reserved(dev, cfg, 0)) {
+		dev_warn(dev, FW_BUG "ECAM %pR isn't reserved\n",
 			 &cfg->res);
 	} else {
 		/* Insert resource if it's not in boot stage */
@@ -796,16 +811,13 @@ int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
 						       &cfg->res);
 
 		if (tmp) {
-			dev_warn(dev,
-				 "MMCONFIG %pR conflicts with "
-				 "%s %pR\n",
+			dev_warn(dev, "ECAM %pR conflicts with %s %pR\n",
 				 &cfg->res, tmp->name, tmp);
 		} else if (pci_mmcfg_arch_map(cfg)) {
-			dev_warn(dev, "fail to map MMCONFIG %pR.\n",
-				 &cfg->res);
+			dev_warn(dev, "fail to map ECAM %pR\n", &cfg->res);
 		} else {
 			list_add_sorted(cfg);
-			dev_info(dev, "MMCONFIG at %pR (base %#lx)\n",
+			dev_info(dev, "ECAM %pR (base %#lx)\n",
 				 &cfg->res, (unsigned long)addr);
 			cfg = NULL;
 			rc = 0;
@@ -823,7 +835,7 @@ int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
 	return rc;
 }
 
-/* Delete MMCFG information for host bridges */
+/* Delete ECAM information for host bridges */
 int pci_mmconfig_delete(u16 seg, u8 start, u8 end)
 {
 	struct pci_mmcfg_region *cfg;
diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c
index bfa789875322..f9ef97c593cf 100644
--- a/arch/x86/pci/mmconfig_32.c
+++ b/arch/x86/pci/mmconfig_32.c
@@ -131,7 +131,7 @@ const struct pci_raw_ops pci_mmcfg = {
 
 int __init pci_mmcfg_arch_init(void)
 {
-	printk(KERN_INFO "PCI: Using MMCONFIG for extended config space\n");
+	printk(KERN_INFO "PCI: Using ECAM for extended config space\n");
 	raw_pci_ext_ops = &pci_mmcfg;
 	return 1;
 }
diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c
index 0c7b6e66c644..cb5aa79a759e 100644
--- a/arch/x86/pci/mmconfig_64.c
+++ b/arch/x86/pci/mmconfig_64.c
@@ -6,6 +6,8 @@
  * space mapped. This allows lockless config space operation.
  */
 
+#define pr_fmt(fmt) "PCI: " fmt
+
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
@@ -14,8 +16,6 @@
 #include <asm/e820/api.h>
 #include <asm/pci_x86.h>
 
-#define PREFIX "PCI: "
-
 static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
 {
 	struct pci_mmcfg_region *cfg = pci_mmconfig_lookup(seg, bus);
@@ -111,6 +111,25 @@ static void __iomem *mcfg_ioremap(struct pci_mmcfg_region *cfg)
 	return addr;
 }
 
+int pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg)
+{
+	cfg->virt = mcfg_ioremap(cfg);
+	if (!cfg->virt) {
+		pr_err("can't map ECAM at %pR\n", &cfg->res);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg)
+{
+	if (cfg && cfg->virt) {
+		iounmap(cfg->virt + PCI_MMCFG_BUS_OFFSET(cfg->start_bus));
+		cfg->virt = NULL;
+	}
+}
+
 int __init pci_mmcfg_arch_init(void)
 {
 	struct pci_mmcfg_region *cfg;
@@ -133,22 +152,3 @@ void __init pci_mmcfg_arch_free(void)
 	list_for_each_entry(cfg, &pci_mmcfg_list, list)
 		pci_mmcfg_arch_unmap(cfg);
 }
-
-int pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg)
-{
-	cfg->virt = mcfg_ioremap(cfg);
-	if (!cfg->virt) {
-		pr_err(PREFIX "can't map MMCONFIG at %pR\n", &cfg->res);
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg)
-{
-	if (cfg && cfg->virt) {
-		iounmap(cfg->virt + PCI_MMCFG_BUS_OFFSET(cfg->start_bus));
-		cfg->virt = NULL;
-	}
-}
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 4f15280732ed..244c643bb0b5 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -3,6 +3,8 @@
  * BIOS32 and PCI BIOS handling.
  */
 
+#include <linux/bits.h>
+#include <linux/bitfield.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -29,8 +31,19 @@
 #define PCIBIOS_HW_TYPE1_SPEC		0x10
 #define PCIBIOS_HW_TYPE2_SPEC		0x20
 
+/*
+ * Returned in EAX:
+ * - AH: return code
+ */
+#define PCIBIOS_RETURN_CODE			GENMASK(15, 8)
+
 int pcibios_enabled;
 
+static u8 pcibios_get_return_code(u32 eax)
+{
+	return FIELD_GET(PCIBIOS_RETURN_CODE, eax);
+}
+
 /* According to the BIOS specification at:
  * http://members.datafast.net.au/dft0802/specs/bios21.pdf, we could
  * restrict the x zone to some pages and make it ro. But this may be
@@ -154,7 +167,7 @@ static int __init check_pcibios(void)
 			: "memory");
 		local_irq_restore(flags);
 
-		status = (eax >> 8) & 0xff;
+		status = pcibios_get_return_code(eax);
 		hw_mech = eax & 0xff;
 		major_ver = (ebx >> 8) & 0xff;
 		minor_ver = ebx & 0xff;
@@ -227,7 +240,7 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
 
 	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
-	return (int)((result & 0xff00) >> 8);
+	return pcibios_get_return_code(result);
 }
 
 static int pci_bios_write(unsigned int seg, unsigned int bus,
@@ -269,7 +282,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
 
 	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
-	return (int)((result & 0xff00) >> 8);
+	return pcibios_get_return_code(result);
 }
 
 
@@ -385,9 +398,10 @@ struct irq_routing_table * pcibios_get_irq_routing_table(void)
 		  "m" (opt)
 		: "memory");
 	DBG("OK  ret=%d, size=%d, map=%x\n", ret, opt.size, map);
-	if (ret & 0xff00)
-		printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", (ret >> 8) & 0xff);
-	else if (opt.size) {
+	ret = pcibios_get_return_code(ret);
+	if (ret) {
+		printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", ret);
+	} else if (opt.size) {
 		rt = kmalloc(sizeof(struct irq_routing_table) + opt.size, GFP_KERNEL);
 		if (rt) {
 			memset(rt, 0, sizeof(struct irq_routing_table));
@@ -415,7 +429,7 @@ int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq)
 		  "b" ((dev->bus->number << 8) | dev->devfn),
 		  "c" ((irq << 8) | (pin + 10)),
 		  "S" (&pci_indirect));
-	return !(ret & 0xff00);
+	return pcibios_get_return_code(ret) == PCIBIOS_SUCCESSFUL;
 }
 EXPORT_SYMBOL(pcibios_set_irq_routing);
 
diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c
index 7368afc03998..8c8ddc4dcc08 100644
--- a/arch/x86/pci/sta2x11-fixup.c
+++ b/arch/x86/pci/sta2x11-fixup.c
@@ -14,6 +14,7 @@
 #include <linux/dma-map-ops.h>
 #include <linux/swiotlb.h>
 #include <asm/iommu.h>
+#include <asm/sta2x11.h>
 
 #define STA2X11_SWIOTLB_SIZE (4*1024*1024)
 
diff --git a/arch/x86/platform/intel-quark/imr_selftest.c b/arch/x86/platform/intel-quark/imr_selftest.c
index 761f3689f60a..84ba715f44d1 100644
--- a/arch/x86/platform/intel-quark/imr_selftest.c
+++ b/arch/x86/platform/intel-quark/imr_selftest.c
@@ -6,7 +6,7 @@
  * Copyright(c) 2015 Bryan O'Donoghue <pure.logic@nexus-software.ie>
  *
  * IMR self test. The purpose of this module is to run a set of tests on the
- * IMR API to validate it's sanity. We check for overlapping, reserved
+ * IMR API to validate its sanity. We check for overlapping, reserved
  * addresses and setup/teardown sanity.
  *
  */
diff --git a/arch/x86/platform/pvh/head.S b/arch/x86/platform/pvh/head.S
index c4365a05ab83..f7235ef87bc3 100644
--- a/arch/x86/platform/pvh/head.S
+++ b/arch/x86/platform/pvh/head.S
@@ -11,6 +11,7 @@
 #include <linux/elfnote.h>
 #include <linux/init.h>
 #include <linux/linkage.h>
+#include <asm/desc_defs.h>
 #include <asm/segment.h>
 #include <asm/asm.h>
 #include <asm/boot.h>
@@ -41,7 +42,7 @@
  *             Bit 8 (TF) must be cleared. Other bits are all unspecified.
  *
  * All other processor registers and flag bits are unspecified. The OS is in
- * charge of setting up it's own stack, GDT and IDT.
+ * charge of setting up its own stack, GDT and IDT.
  */
 
 #define PVH_GDT_ENTRY_CS	1
@@ -148,11 +149,11 @@ SYM_DATA_END(gdt)
 SYM_DATA_START_LOCAL(gdt_start)
 	.quad 0x0000000000000000            /* NULL descriptor */
 #ifdef CONFIG_X86_64
-	.quad GDT_ENTRY(0xa09a, 0, 0xfffff) /* PVH_CS_SEL */
+	.quad GDT_ENTRY(DESC_CODE64, 0, 0xfffff) /* PVH_CS_SEL */
 #else
-	.quad GDT_ENTRY(0xc09a, 0, 0xfffff) /* PVH_CS_SEL */
+	.quad GDT_ENTRY(DESC_CODE32, 0, 0xfffff) /* PVH_CS_SEL */
 #endif
-	.quad GDT_ENTRY(0xc092, 0, 0xfffff) /* PVH_DS_SEL */
+	.quad GDT_ENTRY(DESC_DATA32, 0, 0xfffff) /* PVH_DS_SEL */
 SYM_DATA_END_LABEL(gdt_start, SYM_L_LOCAL, gdt_end)
 
 	.balign 16
diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c
index 4221259a5870..a379501b7a69 100644
--- a/arch/x86/platform/uv/uv_irq.c
+++ b/arch/x86/platform/uv/uv_irq.c
@@ -35,7 +35,7 @@ static void uv_program_mmr(struct irq_cfg *cfg, struct uv_irq_2_mmr_pnode *info)
 	mmr_value = 0;
 	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
 	entry->vector		= cfg->vector;
-	entry->delivery_mode	= apic->delivery_mode;
+	entry->delivery_mode	= APIC_DELIVERY_MODE_FIXED;
 	entry->dest_mode	= apic->dest_mode_logical;
 	entry->polarity		= 0;
 	entry->trigger		= 0;
diff --git a/arch/x86/platform/uv/uv_nmi.c b/arch/x86/platform/uv/uv_nmi.c
index e03207de2880..5c50e550ab63 100644
--- a/arch/x86/platform/uv/uv_nmi.c
+++ b/arch/x86/platform/uv/uv_nmi.c
@@ -741,7 +741,7 @@ static void uv_nmi_dump_state_cpu(int cpu, struct pt_regs *regs)
 	this_cpu_write(uv_cpu_nmi.state, UV_NMI_STATE_DUMP_DONE);
 }
 
-/* Trigger a slave CPU to dump it's state */
+/* Trigger a slave CPU to dump its state */
 static void uv_nmi_trigger_dump(int cpu)
 {
 	int retry = uv_nmi_trigger_delay;
diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c
index ff5afc8a5a41..3712afc3534d 100644
--- a/arch/x86/platform/uv/uv_time.c
+++ b/arch/x86/platform/uv/uv_time.c
@@ -270,7 +270,7 @@ static int uv_rtc_unset_timer(int cpu, int force)
  * Read the RTC.
  *
  * Starting with HUB rev 2.0, the UV RTC register is replicated across all
- * cachelines of it's own page.  This allows faster simultaneous reads
+ * cachelines of its own page.  This allows faster simultaneous reads
  * from a given socket.
  */
 static u64 uv_read_rtc(struct clocksource *cs)
diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c
index 788e5559549f..f9bc444a3064 100644
--- a/arch/x86/realmode/init.c
+++ b/arch/x86/realmode/init.c
@@ -61,7 +61,7 @@ void __init reserve_real_mode(void)
 		set_real_mode_mem(mem);
 
 	/*
-	 * Unconditionally reserve the entire fisrt 1M, see comment in
+	 * Unconditionally reserve the entire first 1M, see comment in
 	 * setup_arch().
 	 */
 	memblock_reserve(0, SZ_1M);
diff --git a/arch/x86/realmode/rm/reboot.S b/arch/x86/realmode/rm/reboot.S
index f10515b10e0a..e714b4624e36 100644
--- a/arch/x86/realmode/rm/reboot.S
+++ b/arch/x86/realmode/rm/reboot.S
@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/linkage.h>
+#include <asm/desc_defs.h>
 #include <asm/segment.h>
 #include <asm/page_types.h>
 #include <asm/processor-flags.h>
@@ -153,5 +154,5 @@ SYM_DATA_START(machine_real_restart_gdt)
 	 * base value 0x100; since this is consistent with real mode
 	 * semantics we don't have to reload the segments once CR0.PE = 0.
 	 */
-	.quad	GDT_ENTRY(0x0093, 0x100, 0xffff)
+	.quad	GDT_ENTRY(DESC_DATA16, 0x100, 0xffff)
 SYM_DATA_END(machine_real_restart_gdt)
diff --git a/arch/x86/tools/Makefile b/arch/x86/tools/Makefile
index 90e820ac9771..7278e2545c35 100644
--- a/arch/x86/tools/Makefile
+++ b/arch/x86/tools/Makefile
@@ -17,7 +17,7 @@ reformatter = $(srctree)/arch/x86/tools/objdump_reformat.awk
 chkobjdump = $(srctree)/arch/x86/tools/chkobjdump.awk
 
 quiet_cmd_posttest = TEST    $@
-      cmd_posttest = ($(OBJDUMP) -v | $(AWK) -f $(chkobjdump)) || $(OBJDUMP) -d -j .text $(objtree)/vmlinux | $(AWK) -f $(reformatter) | $(obj)/insn_decoder_test $(posttest_64bit) $(posttest_verbose)
+      cmd_posttest = $(OBJDUMP) -d -j .text $(objtree)/vmlinux | $(AWK) -f $(reformatter) | $(obj)/insn_decoder_test $(posttest_64bit) $(posttest_verbose)
 
 quiet_cmd_sanitytest = TEST    $@
       cmd_sanitytest = $(obj)/insn_sanity $(posttest_64bit) -m 1000000
diff --git a/arch/x86/tools/chkobjdump.awk b/arch/x86/tools/chkobjdump.awk
deleted file mode 100644
index a4cf678cf5c8..000000000000
--- a/arch/x86/tools/chkobjdump.awk
+++ /dev/null
@@ -1,34 +0,0 @@
-# GNU objdump version checker
-#
-# Usage:
-# objdump -v | awk -f chkobjdump.awk
-BEGIN {
-	# objdump version 2.19 or later is OK for the test.
-	od_ver = 2;
-	od_sver = 19;
-}
-
-/^GNU objdump/ {
-	verstr = ""
-	gsub(/\(.*\)/, "");
-	for (i = 3; i <= NF; i++)
-		if (match($(i), "^[0-9]")) {
-			verstr = $(i);
-			break;
-		}
-	if (verstr == "") {
-		printf("Warning: Failed to find objdump version number.\n");
-		exit 0;
-	}
-	split(verstr, ver, ".");
-	if (ver[1] > od_ver ||
-	    (ver[1] == od_ver && ver[2] >= od_sver)) {
-		exit 1;
-	} else {
-		printf("Warning: objdump version %s is older than %d.%d\n",
-		       verstr, od_ver, od_sver);
-		print("Warning: Skipping posttest.");
-		# Logic is inverted, because we just skip test without error.
-		exit 0;
-	}
-}
diff --git a/arch/x86/tools/objdump_reformat.awk b/arch/x86/tools/objdump_reformat.awk
index f418c91b71f0..20b08a6c4d33 100644
--- a/arch/x86/tools/objdump_reformat.awk
+++ b/arch/x86/tools/objdump_reformat.awk
@@ -11,8 +11,8 @@ BEGIN {
 	prev_addr = ""
 	prev_hex = ""
 	prev_mnemonic = ""
-	bad_expr = "(\\(bad\\)|^rex|^.byte|^rep(z|nz)$|^lock$|^es$|^cs$|^ss$|^ds$|^fs$|^gs$|^data(16|32)$|^addr(16|32|64))"
-	fwait_expr = "^9b "
+	bad_expr = "(\\(bad\\)|<unknown>|^rex|^.byte|^rep(z|nz)$|^lock$|^es$|^cs$|^ss$|^ds$|^fs$|^gs$|^data(16|32)$|^addr(16|32|64))"
+	fwait_expr = "^9b[ \t]*fwait"
 	fwait_str="9b\tfwait"
 }
 
@@ -22,7 +22,7 @@ BEGIN {
 }
 
 /^ *[0-9a-f]+:/ {
-	if (split($0, field, "\t") < 3) {
+	if (split($0, field, /: |\t/) < 3) {
 		# This is a continuation of the same insn.
 		prev_hex = prev_hex field[2]
 	} else {
diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index d30949e25ebd..a3bae2b24626 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -66,7 +66,7 @@ static const char * const sym_regex_kernel[S_NSYMTYPES] = {
 	[S_REL] =
 	"^(__init_(begin|end)|"
 	"__x86_cpu_dev_(start|end)|"
-	"(__parainstructions|__alt_instructions)(_end)?|"
+	"__alt_instructions(_end)?|"
 	"(__iommu_table|__apicdrivers|__smp_locks)(_end)?|"
 	"__(start|end)_pci_.*|"
 #if CONFIG_FW_LOADER
diff --git a/arch/x86/um/asm/elf.h b/arch/x86/um/asm/elf.h
index 6523eb7c3bd1..6052200fe925 100644
--- a/arch/x86/um/asm/elf.h
+++ b/arch/x86/um/asm/elf.h
@@ -168,8 +168,8 @@ do {								\
 	(pr_reg)[18] = (_regs)->regs.gp[18];			\
 	(pr_reg)[19] = (_regs)->regs.gp[19];			\
 	(pr_reg)[20] = (_regs)->regs.gp[20];			\
-	(pr_reg)[21] = current->thread.arch.fs;			\
-	(pr_reg)[22] = 0;					\
+	(pr_reg)[21] = (_regs)->regs.gp[21];			\
+	(pr_reg)[22] = (_regs)->regs.gp[22];			\
 	(pr_reg)[23] = 0;					\
 	(pr_reg)[24] = 0;					\
 	(pr_reg)[25] = 0;					\
diff --git a/arch/x86/um/asm/processor_64.h b/arch/x86/um/asm/processor_64.h
index 1ef9c21877bc..f90159508936 100644
--- a/arch/x86/um/asm/processor_64.h
+++ b/arch/x86/um/asm/processor_64.h
@@ -10,13 +10,11 @@
 struct arch_thread {
         unsigned long debugregs[8];
         int debugregs_seq;
-        unsigned long fs;
         struct faultinfo faultinfo;
 };
 
 #define INIT_ARCH_THREAD { .debugregs  		= { [ 0 ... 7 ] = 0 }, \
 			   .debugregs_seq	= 0, \
-			   .fs			= 0, \
 			   .faultinfo		= { 0, 0, 0 } }
 
 #define STACKSLOTS_PER_LINE 4
@@ -28,7 +26,6 @@ static inline void arch_flush_thread(struct arch_thread *thread)
 static inline void arch_copy_thread(struct arch_thread *from,
                                     struct arch_thread *to)
 {
-	to->fs = from->fs;
 }
 
 #define current_sp() ({ void *sp; __asm__("movq %%rsp, %0" : "=r" (sp) : ); sp; })
diff --git a/arch/x86/um/os-Linux/Makefile b/arch/x86/um/os-Linux/Makefile
index ae169125d03f..5249bbc30dcd 100644
--- a/arch/x86/um/os-Linux/Makefile
+++ b/arch/x86/um/os-Linux/Makefile
@@ -6,7 +6,6 @@
 obj-y = registers.o task_size.o mcontext.o
 
 obj-$(CONFIG_X86_32) += tls.o
-obj-$(CONFIG_64BIT) += prctl.o
 
 USER_OBJS := $(obj-y)
 
diff --git a/arch/x86/um/os-Linux/prctl.c b/arch/x86/um/os-Linux/prctl.c
deleted file mode 100644
index 8431e87ac333..000000000000
--- a/arch/x86/um/os-Linux/prctl.c
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Copyright (C) 2007 Jeff Dike (jdike@{addtoit.com,linux.intel.com})
- * Licensed under the GPL
- */
-
-#include <sys/ptrace.h>
-#include <asm/ptrace.h>
-
-int os_arch_prctl(int pid, int option, unsigned long *arg2)
-{
-	return ptrace(PTRACE_ARCH_PRCTL, pid, (unsigned long) arg2, option);
-}
diff --git a/arch/x86/um/ptrace_32.c b/arch/x86/um/ptrace_32.c
index 0bc4b73a9cde..7f1abde2c84b 100644
--- a/arch/x86/um/ptrace_32.c
+++ b/arch/x86/um/ptrace_32.c
@@ -25,30 +25,6 @@ void arch_switch_to(struct task_struct *to)
 		printk(KERN_WARNING "arch_switch_tls failed, errno = EINVAL\n");
 }
 
-int is_syscall(unsigned long addr)
-{
-	unsigned short instr;
-	int n;
-
-	n = copy_from_user(&instr, (void __user *) addr, sizeof(instr));
-	if (n) {
-		/* access_process_vm() grants access to vsyscall and stub,
-		 * while copy_from_user doesn't. Maybe access_process_vm is
-		 * slow, but that doesn't matter, since it will be called only
-		 * in case of singlestepping, if copy_from_user failed.
-		 */
-		n = access_process_vm(current, addr, &instr, sizeof(instr),
-				FOLL_FORCE);
-		if (n != sizeof(instr)) {
-			printk(KERN_ERR "is_syscall : failed to read "
-			       "instruction from 0x%lx\n", addr);
-			return 1;
-		}
-	}
-	/* int 0x80 or sysenter */
-	return (instr == 0x80cd) || (instr == 0x340f);
-}
-
 /* determines which flags the user has access to. */
 /* 1 = access 0 = no access */
 #define FLAG_MASK 0x00044dd5
diff --git a/arch/x86/um/ptrace_64.c b/arch/x86/um/ptrace_64.c
index 289d0159b041..aa68d83d3f44 100644
--- a/arch/x86/um/ptrace_64.c
+++ b/arch/x86/um/ptrace_64.c
@@ -188,32 +188,6 @@ int peek_user(struct task_struct *child, long addr, long data)
 	return put_user(tmp, (unsigned long *) data);
 }
 
-/* XXX Mostly copied from sys-i386 */
-int is_syscall(unsigned long addr)
-{
-	unsigned short instr;
-	int n;
-
-	n = copy_from_user(&instr, (void __user *) addr, sizeof(instr));
-	if (n) {
-		/*
-		 * access_process_vm() grants access to vsyscall and stub,
-		 * while copy_from_user doesn't. Maybe access_process_vm is
-		 * slow, but that doesn't matter, since it will be called only
-		 * in case of singlestepping, if copy_from_user failed.
-		 */
-		n = access_process_vm(current, addr, &instr, sizeof(instr),
-				FOLL_FORCE);
-		if (n != sizeof(instr)) {
-			printk("is_syscall : failed to read instruction from "
-			       "0x%lx\n", addr);
-			return 1;
-		}
-	}
-	/* sysenter */
-	return instr == 0x050f;
-}
-
 static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
 	int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
diff --git a/arch/x86/um/shared/sysdep/ptrace_32.h b/arch/x86/um/shared/sysdep/ptrace_32.h
index db8478a83a09..0c4989842fbe 100644
--- a/arch/x86/um/shared/sysdep/ptrace_32.h
+++ b/arch/x86/um/shared/sysdep/ptrace_32.h
@@ -8,10 +8,6 @@
 
 #define MAX_FP_NR HOST_FPX_SIZE
 
-void set_using_sysemu(int value);
-int get_using_sysemu(void);
-extern int sysemu_supported;
-
 #define UPT_SYSCALL_ARG1(r) UPT_BX(r)
 #define UPT_SYSCALL_ARG2(r) UPT_CX(r)
 #define UPT_SYSCALL_ARG3(r) UPT_DX(r)
diff --git a/arch/x86/um/shared/sysdep/ptrace_user.h b/arch/x86/um/shared/sysdep/ptrace_user.h
index 44782bbad41e..1d1a824fa652 100644
--- a/arch/x86/um/shared/sysdep/ptrace_user.h
+++ b/arch/x86/um/shared/sysdep/ptrace_user.h
@@ -15,14 +15,12 @@
 #define FP_SIZE ((HOST_FPX_SIZE > HOST_FP_SIZE) ? HOST_FPX_SIZE : HOST_FP_SIZE)
 #else
 #define FP_SIZE HOST_FP_SIZE
+#endif
 
 /*
- * x86_64 FC3 doesn't define this in /usr/include/linux/ptrace.h even though
- * it's defined in the kernel's include/linux/ptrace.h. Additionally, use the
- * 2.4 name and value for 2.4 host compatibility.
+ * glibc before 2.27 does not include PTRACE_SYSEMU_SINGLESTEP in its enum,
+ * ensure we have a definition by (re-)defining it here.
  */
-#ifndef PTRACE_OLDSETOPTIONS
-#define PTRACE_OLDSETOPTIONS 21
-#endif
-
+#ifndef PTRACE_SYSEMU_SINGLESTEP
+#define PTRACE_SYSEMU_SINGLESTEP 32
 #endif
diff --git a/arch/x86/um/shared/sysdep/stub_32.h b/arch/x86/um/shared/sysdep/stub_32.h
index 38fa894b65d0..ea8b5a2d67af 100644
--- a/arch/x86/um/shared/sysdep/stub_32.h
+++ b/arch/x86/um/shared/sysdep/stub_32.h
@@ -12,72 +12,79 @@
 #define STUB_MMAP_NR __NR_mmap2
 #define MMAP_OFFSET(o) ((o) >> UM_KERN_PAGE_SHIFT)
 
-static inline long stub_syscall0(long syscall)
+static __always_inline long stub_syscall0(long syscall)
 {
 	long ret;
 
-	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall));
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall)
+			: "memory");
 
 	return ret;
 }
 
-static inline long stub_syscall1(long syscall, long arg1)
+static __always_inline long stub_syscall1(long syscall, long arg1)
 {
 	long ret;
 
-	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1));
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1)
+			: "memory");
 
 	return ret;
 }
 
-static inline long stub_syscall2(long syscall, long arg1, long arg2)
+static __always_inline long stub_syscall2(long syscall, long arg1, long arg2)
 {
 	long ret;
 
 	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
-			"c" (arg2));
+			"c" (arg2)
+			: "memory");
 
 	return ret;
 }
 
-static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
+static __always_inline long stub_syscall3(long syscall, long arg1, long arg2,
+					  long arg3)
 {
 	long ret;
 
 	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
-			"c" (arg2), "d" (arg3));
+			"c" (arg2), "d" (arg3)
+			: "memory");
 
 	return ret;
 }
 
-static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
-				 long arg4)
+static __always_inline long stub_syscall4(long syscall, long arg1, long arg2,
+					  long arg3, long arg4)
 {
 	long ret;
 
 	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
-			"c" (arg2), "d" (arg3), "S" (arg4));
+			"c" (arg2), "d" (arg3), "S" (arg4)
+			: "memory");
 
 	return ret;
 }
 
-static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
-				 long arg4, long arg5)
+static __always_inline long stub_syscall5(long syscall, long arg1, long arg2,
+					  long arg3, long arg4, long arg5)
 {
 	long ret;
 
 	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
-			"c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5));
+			"c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5)
+			: "memory");
 
 	return ret;
 }
 
-static inline void trap_myself(void)
+static __always_inline void trap_myself(void)
 {
 	__asm("int3");
 }
 
-static inline void remap_stack_and_trap(void)
+static __always_inline void remap_stack_and_trap(void)
 {
 	__asm__ volatile (
 		"movl %%esp,%%ebx ;"
diff --git a/arch/x86/um/shared/sysdep/stub_64.h b/arch/x86/um/shared/sysdep/stub_64.h
index 2de1c8f88173..b24168ef0ac4 100644
--- a/arch/x86/um/shared/sysdep/stub_64.h
+++ b/arch/x86/um/shared/sysdep/stub_64.h
@@ -16,7 +16,7 @@
 #define __syscall_clobber "r11","rcx","memory"
 #define __syscall "syscall"
 
-static inline long stub_syscall0(long syscall)
+static __always_inline long stub_syscall0(long syscall)
 {
 	long ret;
 
@@ -27,7 +27,7 @@ static inline long stub_syscall0(long syscall)
 	return ret;
 }
 
-static inline long stub_syscall2(long syscall, long arg1, long arg2)
+static __always_inline long stub_syscall2(long syscall, long arg1, long arg2)
 {
 	long ret;
 
@@ -38,7 +38,8 @@ static inline long stub_syscall2(long syscall, long arg1, long arg2)
 	return ret;
 }
 
-static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
+static __always_inline long stub_syscall3(long syscall, long arg1, long arg2,
+					  long arg3)
 {
 	long ret;
 
@@ -50,7 +51,7 @@ static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
 	return ret;
 }
 
-static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
+static __always_inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
 				 long arg4)
 {
 	long ret;
@@ -64,8 +65,8 @@ static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
 	return ret;
 }
 
-static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
-				 long arg4, long arg5)
+static __always_inline long stub_syscall5(long syscall, long arg1, long arg2,
+					  long arg3, long arg4, long arg5)
 {
 	long ret;
 
@@ -78,12 +79,12 @@ static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
 	return ret;
 }
 
-static inline void trap_myself(void)
+static __always_inline void trap_myself(void)
 {
 	__asm("int3");
 }
 
-static inline void remap_stack_and_trap(void)
+static __always_inline void remap_stack_and_trap(void)
 {
 	__asm__ volatile (
 		"movq %0,%%rax ;"
diff --git a/arch/x86/um/syscalls_64.c b/arch/x86/um/syscalls_64.c
index 27b29ae6c471..6a00a28c9cca 100644
--- a/arch/x86/um/syscalls_64.c
+++ b/arch/x86/um/syscalls_64.c
@@ -16,60 +16,24 @@
 long arch_prctl(struct task_struct *task, int option,
 		unsigned long __user *arg2)
 {
-	unsigned long *ptr = arg2, tmp;
-	long ret;
-	int pid = task->mm->context.id.u.pid;
-
-	/*
-	 * With ARCH_SET_FS (and ARCH_SET_GS is treated similarly to
-	 * be safe), we need to call arch_prctl on the host because
-	 * setting %fs may result in something else happening (like a
-	 * GDT or thread.fs being set instead).  So, we let the host
-	 * fiddle the registers and thread struct and restore the
-	 * registers afterwards.
-	 *
-	 * So, the saved registers are stored to the process (this
-	 * needed because a stub may have been the last thing to run),
-	 * arch_prctl is run on the host, then the registers are read
-	 * back.
-	 */
-	switch (option) {
-	case ARCH_SET_FS:
-	case ARCH_SET_GS:
-		ret = restore_pid_registers(pid, &current->thread.regs.regs);
-		if (ret)
-			return ret;
-		break;
-	case ARCH_GET_FS:
-	case ARCH_GET_GS:
-		/*
-		 * With these two, we read to a local pointer and
-		 * put_user it to the userspace pointer that we were
-		 * given.  If addr isn't valid (because it hasn't been
-		 * faulted in or is just bogus), we want put_user to
-		 * fault it in (or return -EFAULT) instead of having
-		 * the host return -EFAULT.
-		 */
-		ptr = &tmp;
-	}
-
-	ret = os_arch_prctl(pid, option, ptr);
-	if (ret)
-		return ret;
+	long ret = -EINVAL;
 
 	switch (option) {
 	case ARCH_SET_FS:
-		current->thread.arch.fs = (unsigned long) ptr;
-		ret = save_registers(pid, &current->thread.regs.regs);
+		current->thread.regs.regs.gp[FS_BASE / sizeof(unsigned long)] =
+			(unsigned long) arg2;
+		ret = 0;
 		break;
 	case ARCH_SET_GS:
-		ret = save_registers(pid, &current->thread.regs.regs);
+		current->thread.regs.regs.gp[GS_BASE / sizeof(unsigned long)] =
+			(unsigned long) arg2;
+		ret = 0;
 		break;
 	case ARCH_GET_FS:
-		ret = put_user(tmp, arg2);
+		ret = put_user(current->thread.regs.regs.gp[FS_BASE / sizeof(unsigned long)], arg2);
 		break;
 	case ARCH_GET_GS:
-		ret = put_user(tmp, arg2);
+		ret = put_user(current->thread.regs.regs.gp[GS_BASE / sizeof(unsigned long)], arg2);
 		break;
 	}
 
@@ -83,10 +47,10 @@ SYSCALL_DEFINE2(arch_prctl, int, option, unsigned long, arg2)
 
 void arch_switch_to(struct task_struct *to)
 {
-	if ((to->thread.arch.fs == 0) || (to->mm == NULL))
-		return;
-
-	arch_prctl(to, ARCH_SET_FS, (void __user *) to->thread.arch.fs);
+	/*
+	 * Nothing needs to be done on x86_64.
+	 * The FS_BASE/GS_BASE registers are saved in the ptrace register set.
+	 */
 }
 
 SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
diff --git a/arch/x86/um/sysrq_64.c b/arch/x86/um/sysrq_64.c
index ef1eb4f4f612..0bf6de40abff 100644
--- a/arch/x86/um/sysrq_64.c
+++ b/arch/x86/um/sysrq_64.c
@@ -6,6 +6,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/pid.h>
 #include <linux/sched.h>
 #include <linux/sched/debug.h>
 #include <linux/utsname.h>
diff --git a/arch/x86/um/tls_64.c b/arch/x86/um/tls_64.c
index ebd3855d9b13..c51a613f6f5c 100644
--- a/arch/x86/um/tls_64.c
+++ b/arch/x86/um/tls_64.c
@@ -12,7 +12,7 @@ int arch_set_tls(struct task_struct *t, unsigned long tls)
 	 * If CLONE_SETTLS is set, we need to save the thread id
 	 * so it can be set during context switches.
 	 */
-	t->thread.arch.fs = tls;
+	t->thread.regs.regs.gp[FS_BASE / sizeof(unsigned long)] = tls;
 
 	return 0;
 }
diff --git a/arch/x86/virt/vmx/tdx/Makefile b/arch/x86/virt/vmx/tdx/Makefile
index 46ef8f73aebb..90da47eb85ee 100644
--- a/arch/x86/virt/vmx/tdx/Makefile
+++ b/arch/x86/virt/vmx/tdx/Makefile
@@ -1,2 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-y += seamcall.o
+obj-y += seamcall.o tdx.o
diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
new file mode 100644
index 000000000000..4d6826a76f78
--- /dev/null
+++ b/arch/x86/virt/vmx/tdx/tdx.c
@@ -0,0 +1,1492 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright(c) 2023 Intel Corporation.
+ *
+ * Intel Trusted Domain Extensions (TDX) support
+ */
+
+#define pr_fmt(fmt)	"virt/tdx: " fmt
+
+#include <linux/types.h>
+#include <linux/cache.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/printk.h>
+#include <linux/cpu.h>
+#include <linux/spinlock.h>
+#include <linux/percpu-defs.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/memblock.h>
+#include <linux/memory.h>
+#include <linux/minmax.h>
+#include <linux/sizes.h>
+#include <linux/pfn.h>
+#include <linux/align.h>
+#include <linux/sort.h>
+#include <linux/log2.h>
+#include <linux/acpi.h>
+#include <linux/suspend.h>
+#include <linux/acpi.h>
+#include <asm/page.h>
+#include <asm/special_insns.h>
+#include <asm/msr-index.h>
+#include <asm/msr.h>
+#include <asm/cpufeature.h>
+#include <asm/tdx.h>
+#include <asm/intel-family.h>
+#include <asm/processor.h>
+#include <asm/mce.h>
+#include "tdx.h"
+
+static u32 tdx_global_keyid __ro_after_init;
+static u32 tdx_guest_keyid_start __ro_after_init;
+static u32 tdx_nr_guest_keyids __ro_after_init;
+
+static DEFINE_PER_CPU(bool, tdx_lp_initialized);
+
+static struct tdmr_info_list tdx_tdmr_list;
+
+static enum tdx_module_status_t tdx_module_status;
+static DEFINE_MUTEX(tdx_module_lock);
+
+/* All TDX-usable memory regions.  Protected by mem_hotplug_lock. */
+static LIST_HEAD(tdx_memlist);
+
+typedef void (*sc_err_func_t)(u64 fn, u64 err, struct tdx_module_args *args);
+
+static inline void seamcall_err(u64 fn, u64 err, struct tdx_module_args *args)
+{
+	pr_err("SEAMCALL (0x%016llx) failed: 0x%016llx\n", fn, err);
+}
+
+static inline void seamcall_err_ret(u64 fn, u64 err,
+				    struct tdx_module_args *args)
+{
+	seamcall_err(fn, err, args);
+	pr_err("RCX 0x%016llx RDX 0x%016llx R08 0x%016llx\n",
+			args->rcx, args->rdx, args->r8);
+	pr_err("R09 0x%016llx R10 0x%016llx R11 0x%016llx\n",
+			args->r9, args->r10, args->r11);
+}
+
+static inline int sc_retry_prerr(sc_func_t func, sc_err_func_t err_func,
+				 u64 fn, struct tdx_module_args *args)
+{
+	u64 sret = sc_retry(func, fn, args);
+
+	if (sret == TDX_SUCCESS)
+		return 0;
+
+	if (sret == TDX_SEAMCALL_VMFAILINVALID)
+		return -ENODEV;
+
+	if (sret == TDX_SEAMCALL_GP)
+		return -EOPNOTSUPP;
+
+	if (sret == TDX_SEAMCALL_UD)
+		return -EACCES;
+
+	err_func(fn, sret, args);
+	return -EIO;
+}
+
+#define seamcall_prerr(__fn, __args)						\
+	sc_retry_prerr(__seamcall, seamcall_err, (__fn), (__args))
+
+#define seamcall_prerr_ret(__fn, __args)					\
+	sc_retry_prerr(__seamcall_ret, seamcall_err_ret, (__fn), (__args))
+
+/*
+ * Do the module global initialization once and return its result.
+ * It can be done on any cpu.  It's always called with interrupts
+ * disabled.
+ */
+static int try_init_module_global(void)
+{
+	struct tdx_module_args args = {};
+	static DEFINE_RAW_SPINLOCK(sysinit_lock);
+	static bool sysinit_done;
+	static int sysinit_ret;
+
+	lockdep_assert_irqs_disabled();
+
+	raw_spin_lock(&sysinit_lock);
+
+	if (sysinit_done)
+		goto out;
+
+	/* RCX is module attributes and all bits are reserved */
+	args.rcx = 0;
+	sysinit_ret = seamcall_prerr(TDH_SYS_INIT, &args);
+
+	/*
+	 * The first SEAMCALL also detects the TDX module, thus
+	 * it can fail due to the TDX module is not loaded.
+	 * Dump message to let the user know.
+	 */
+	if (sysinit_ret == -ENODEV)
+		pr_err("module not loaded\n");
+
+	sysinit_done = true;
+out:
+	raw_spin_unlock(&sysinit_lock);
+	return sysinit_ret;
+}
+
+/**
+ * tdx_cpu_enable - Enable TDX on local cpu
+ *
+ * Do one-time TDX module per-cpu initialization SEAMCALL (and TDX module
+ * global initialization SEAMCALL if not done) on local cpu to make this
+ * cpu be ready to run any other SEAMCALLs.
+ *
+ * Always call this function via IPI function calls.
+ *
+ * Return 0 on success, otherwise errors.
+ */
+int tdx_cpu_enable(void)
+{
+	struct tdx_module_args args = {};
+	int ret;
+
+	if (!boot_cpu_has(X86_FEATURE_TDX_HOST_PLATFORM))
+		return -ENODEV;
+
+	lockdep_assert_irqs_disabled();
+
+	if (__this_cpu_read(tdx_lp_initialized))
+		return 0;
+
+	/*
+	 * The TDX module global initialization is the very first step
+	 * to enable TDX.  Need to do it first (if hasn't been done)
+	 * before the per-cpu initialization.
+	 */
+	ret = try_init_module_global();
+	if (ret)
+		return ret;
+
+	ret = seamcall_prerr(TDH_SYS_LP_INIT, &args);
+	if (ret)
+		return ret;
+
+	__this_cpu_write(tdx_lp_initialized, true);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(tdx_cpu_enable);
+
+/*
+ * Add a memory region as a TDX memory block.  The caller must make sure
+ * all memory regions are added in address ascending order and don't
+ * overlap.
+ */
+static int add_tdx_memblock(struct list_head *tmb_list, unsigned long start_pfn,
+			    unsigned long end_pfn, int nid)
+{
+	struct tdx_memblock *tmb;
+
+	tmb = kmalloc(sizeof(*tmb), GFP_KERNEL);
+	if (!tmb)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&tmb->list);
+	tmb->start_pfn = start_pfn;
+	tmb->end_pfn = end_pfn;
+	tmb->nid = nid;
+
+	/* @tmb_list is protected by mem_hotplug_lock */
+	list_add_tail(&tmb->list, tmb_list);
+	return 0;
+}
+
+static void free_tdx_memlist(struct list_head *tmb_list)
+{
+	/* @tmb_list is protected by mem_hotplug_lock */
+	while (!list_empty(tmb_list)) {
+		struct tdx_memblock *tmb = list_first_entry(tmb_list,
+				struct tdx_memblock, list);
+
+		list_del(&tmb->list);
+		kfree(tmb);
+	}
+}
+
+/*
+ * Ensure that all memblock memory regions are convertible to TDX
+ * memory.  Once this has been established, stash the memblock
+ * ranges off in a secondary structure because memblock is modified
+ * in memory hotplug while TDX memory regions are fixed.
+ */
+static int build_tdx_memlist(struct list_head *tmb_list)
+{
+	unsigned long start_pfn, end_pfn;
+	int i, nid, ret;
+
+	for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid) {
+		/*
+		 * The first 1MB is not reported as TDX convertible memory.
+		 * Although the first 1MB is always reserved and won't end up
+		 * to the page allocator, it is still in memblock's memory
+		 * regions.  Skip them manually to exclude them as TDX memory.
+		 */
+		start_pfn = max(start_pfn, PHYS_PFN(SZ_1M));
+		if (start_pfn >= end_pfn)
+			continue;
+
+		/*
+		 * Add the memory regions as TDX memory.  The regions in
+		 * memblock has already guaranteed they are in address
+		 * ascending order and don't overlap.
+		 */
+		ret = add_tdx_memblock(tmb_list, start_pfn, end_pfn, nid);
+		if (ret)
+			goto err;
+	}
+
+	return 0;
+err:
+	free_tdx_memlist(tmb_list);
+	return ret;
+}
+
+static int read_sys_metadata_field(u64 field_id, u64 *data)
+{
+	struct tdx_module_args args = {};
+	int ret;
+
+	/*
+	 * TDH.SYS.RD -- reads one global metadata field
+	 *  - RDX (in): the field to read
+	 *  - R8 (out): the field data
+	 */
+	args.rdx = field_id;
+	ret = seamcall_prerr_ret(TDH_SYS_RD, &args);
+	if (ret)
+		return ret;
+
+	*data = args.r8;
+
+	return 0;
+}
+
+static int read_sys_metadata_field16(u64 field_id,
+				     int offset,
+				     struct tdx_tdmr_sysinfo *ts)
+{
+	u16 *ts_member = ((void *)ts) + offset;
+	u64 tmp;
+	int ret;
+
+	if (WARN_ON_ONCE(MD_FIELD_ID_ELE_SIZE_CODE(field_id) !=
+			MD_FIELD_ID_ELE_SIZE_16BIT))
+		return -EINVAL;
+
+	ret = read_sys_metadata_field(field_id, &tmp);
+	if (ret)
+		return ret;
+
+	*ts_member = tmp;
+
+	return 0;
+}
+
+struct field_mapping {
+	u64 field_id;
+	int offset;
+};
+
+#define TD_SYSINFO_MAP(_field_id, _offset) \
+	{ .field_id = MD_FIELD_ID_##_field_id,	   \
+	  .offset   = offsetof(struct tdx_tdmr_sysinfo, _offset) }
+
+/* Map TD_SYSINFO fields into 'struct tdx_tdmr_sysinfo': */
+static const struct field_mapping fields[] = {
+	TD_SYSINFO_MAP(MAX_TDMRS,	      max_tdmrs),
+	TD_SYSINFO_MAP(MAX_RESERVED_PER_TDMR, max_reserved_per_tdmr),
+	TD_SYSINFO_MAP(PAMT_4K_ENTRY_SIZE,    pamt_entry_size[TDX_PS_4K]),
+	TD_SYSINFO_MAP(PAMT_2M_ENTRY_SIZE,    pamt_entry_size[TDX_PS_2M]),
+	TD_SYSINFO_MAP(PAMT_1G_ENTRY_SIZE,    pamt_entry_size[TDX_PS_1G]),
+};
+
+static int get_tdx_tdmr_sysinfo(struct tdx_tdmr_sysinfo *tdmr_sysinfo)
+{
+	int ret;
+	int i;
+
+	/* Populate 'tdmr_sysinfo' fields using the mapping structure above: */
+	for (i = 0; i < ARRAY_SIZE(fields); i++) {
+		ret = read_sys_metadata_field16(fields[i].field_id,
+						fields[i].offset,
+						tdmr_sysinfo);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/* Calculate the actual TDMR size */
+static int tdmr_size_single(u16 max_reserved_per_tdmr)
+{
+	int tdmr_sz;
+
+	/*
+	 * The actual size of TDMR depends on the maximum
+	 * number of reserved areas.
+	 */
+	tdmr_sz = sizeof(struct tdmr_info);
+	tdmr_sz += sizeof(struct tdmr_reserved_area) * max_reserved_per_tdmr;
+
+	return ALIGN(tdmr_sz, TDMR_INFO_ALIGNMENT);
+}
+
+static int alloc_tdmr_list(struct tdmr_info_list *tdmr_list,
+			   struct tdx_tdmr_sysinfo *tdmr_sysinfo)
+{
+	size_t tdmr_sz, tdmr_array_sz;
+	void *tdmr_array;
+
+	tdmr_sz = tdmr_size_single(tdmr_sysinfo->max_reserved_per_tdmr);
+	tdmr_array_sz = tdmr_sz * tdmr_sysinfo->max_tdmrs;
+
+	/*
+	 * To keep things simple, allocate all TDMRs together.
+	 * The buffer needs to be physically contiguous to make
+	 * sure each TDMR is physically contiguous.
+	 */
+	tdmr_array = alloc_pages_exact(tdmr_array_sz,
+			GFP_KERNEL | __GFP_ZERO);
+	if (!tdmr_array)
+		return -ENOMEM;
+
+	tdmr_list->tdmrs = tdmr_array;
+
+	/*
+	 * Keep the size of TDMR to find the target TDMR
+	 * at a given index in the TDMR list.
+	 */
+	tdmr_list->tdmr_sz = tdmr_sz;
+	tdmr_list->max_tdmrs = tdmr_sysinfo->max_tdmrs;
+	tdmr_list->nr_consumed_tdmrs = 0;
+
+	return 0;
+}
+
+static void free_tdmr_list(struct tdmr_info_list *tdmr_list)
+{
+	free_pages_exact(tdmr_list->tdmrs,
+			tdmr_list->max_tdmrs * tdmr_list->tdmr_sz);
+}
+
+/* Get the TDMR from the list at the given index. */
+static struct tdmr_info *tdmr_entry(struct tdmr_info_list *tdmr_list,
+				    int idx)
+{
+	int tdmr_info_offset = tdmr_list->tdmr_sz * idx;
+
+	return (void *)tdmr_list->tdmrs + tdmr_info_offset;
+}
+
+#define TDMR_ALIGNMENT		SZ_1G
+#define TDMR_ALIGN_DOWN(_addr)	ALIGN_DOWN((_addr), TDMR_ALIGNMENT)
+#define TDMR_ALIGN_UP(_addr)	ALIGN((_addr), TDMR_ALIGNMENT)
+
+static inline u64 tdmr_end(struct tdmr_info *tdmr)
+{
+	return tdmr->base + tdmr->size;
+}
+
+/*
+ * Take the memory referenced in @tmb_list and populate the
+ * preallocated @tdmr_list, following all the special alignment
+ * and size rules for TDMR.
+ */
+static int fill_out_tdmrs(struct list_head *tmb_list,
+			  struct tdmr_info_list *tdmr_list)
+{
+	struct tdx_memblock *tmb;
+	int tdmr_idx = 0;
+
+	/*
+	 * Loop over TDX memory regions and fill out TDMRs to cover them.
+	 * To keep it simple, always try to use one TDMR to cover one
+	 * memory region.
+	 *
+	 * In practice TDX supports at least 64 TDMRs.  A 2-socket system
+	 * typically only consumes less than 10 of those.  This code is
+	 * dumb and simple and may use more TMDRs than is strictly
+	 * required.
+	 */
+	list_for_each_entry(tmb, tmb_list, list) {
+		struct tdmr_info *tdmr = tdmr_entry(tdmr_list, tdmr_idx);
+		u64 start, end;
+
+		start = TDMR_ALIGN_DOWN(PFN_PHYS(tmb->start_pfn));
+		end   = TDMR_ALIGN_UP(PFN_PHYS(tmb->end_pfn));
+
+		/*
+		 * A valid size indicates the current TDMR has already
+		 * been filled out to cover the previous memory region(s).
+		 */
+		if (tdmr->size) {
+			/*
+			 * Loop to the next if the current memory region
+			 * has already been fully covered.
+			 */
+			if (end <= tdmr_end(tdmr))
+				continue;
+
+			/* Otherwise, skip the already covered part. */
+			if (start < tdmr_end(tdmr))
+				start = tdmr_end(tdmr);
+
+			/*
+			 * Create a new TDMR to cover the current memory
+			 * region, or the remaining part of it.
+			 */
+			tdmr_idx++;
+			if (tdmr_idx >= tdmr_list->max_tdmrs) {
+				pr_warn("initialization failed: TDMRs exhausted.\n");
+				return -ENOSPC;
+			}
+
+			tdmr = tdmr_entry(tdmr_list, tdmr_idx);
+		}
+
+		tdmr->base = start;
+		tdmr->size = end - start;
+	}
+
+	/* @tdmr_idx is always the index of the last valid TDMR. */
+	tdmr_list->nr_consumed_tdmrs = tdmr_idx + 1;
+
+	/*
+	 * Warn early that kernel is about to run out of TDMRs.
+	 *
+	 * This is an indication that TDMR allocation has to be
+	 * reworked to be smarter to not run into an issue.
+	 */
+	if (tdmr_list->max_tdmrs - tdmr_list->nr_consumed_tdmrs < TDMR_NR_WARN)
+		pr_warn("consumed TDMRs reaching limit: %d used out of %d\n",
+				tdmr_list->nr_consumed_tdmrs,
+				tdmr_list->max_tdmrs);
+
+	return 0;
+}
+
+/*
+ * Calculate PAMT size given a TDMR and a page size.  The returned
+ * PAMT size is always aligned up to 4K page boundary.
+ */
+static unsigned long tdmr_get_pamt_sz(struct tdmr_info *tdmr, int pgsz,
+				      u16 pamt_entry_size)
+{
+	unsigned long pamt_sz, nr_pamt_entries;
+
+	switch (pgsz) {
+	case TDX_PS_4K:
+		nr_pamt_entries = tdmr->size >> PAGE_SHIFT;
+		break;
+	case TDX_PS_2M:
+		nr_pamt_entries = tdmr->size >> PMD_SHIFT;
+		break;
+	case TDX_PS_1G:
+		nr_pamt_entries = tdmr->size >> PUD_SHIFT;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		return 0;
+	}
+
+	pamt_sz = nr_pamt_entries * pamt_entry_size;
+	/* TDX requires PAMT size must be 4K aligned */
+	pamt_sz = ALIGN(pamt_sz, PAGE_SIZE);
+
+	return pamt_sz;
+}
+
+/*
+ * Locate a NUMA node which should hold the allocation of the @tdmr
+ * PAMT.  This node will have some memory covered by the TDMR.  The
+ * relative amount of memory covered is not considered.
+ */
+static int tdmr_get_nid(struct tdmr_info *tdmr, struct list_head *tmb_list)
+{
+	struct tdx_memblock *tmb;
+
+	/*
+	 * A TDMR must cover at least part of one TMB.  That TMB will end
+	 * after the TDMR begins.  But, that TMB may have started before
+	 * the TDMR.  Find the next 'tmb' that _ends_ after this TDMR
+	 * begins.  Ignore 'tmb' start addresses.  They are irrelevant.
+	 */
+	list_for_each_entry(tmb, tmb_list, list) {
+		if (tmb->end_pfn > PHYS_PFN(tdmr->base))
+			return tmb->nid;
+	}
+
+	/*
+	 * Fall back to allocating the TDMR's metadata from node 0 when
+	 * no TDX memory block can be found.  This should never happen
+	 * since TDMRs originate from TDX memory blocks.
+	 */
+	pr_warn("TDMR [0x%llx, 0x%llx): unable to find local NUMA node for PAMT allocation, fallback to use node 0.\n",
+			tdmr->base, tdmr_end(tdmr));
+	return 0;
+}
+
+/*
+ * Allocate PAMTs from the local NUMA node of some memory in @tmb_list
+ * within @tdmr, and set up PAMTs for @tdmr.
+ */
+static int tdmr_set_up_pamt(struct tdmr_info *tdmr,
+			    struct list_head *tmb_list,
+			    u16 pamt_entry_size[])
+{
+	unsigned long pamt_base[TDX_PS_NR];
+	unsigned long pamt_size[TDX_PS_NR];
+	unsigned long tdmr_pamt_base;
+	unsigned long tdmr_pamt_size;
+	struct page *pamt;
+	int pgsz, nid;
+
+	nid = tdmr_get_nid(tdmr, tmb_list);
+
+	/*
+	 * Calculate the PAMT size for each TDX supported page size
+	 * and the total PAMT size.
+	 */
+	tdmr_pamt_size = 0;
+	for (pgsz = TDX_PS_4K; pgsz < TDX_PS_NR; pgsz++) {
+		pamt_size[pgsz] = tdmr_get_pamt_sz(tdmr, pgsz,
+					pamt_entry_size[pgsz]);
+		tdmr_pamt_size += pamt_size[pgsz];
+	}
+
+	/*
+	 * Allocate one chunk of physically contiguous memory for all
+	 * PAMTs.  This helps minimize the PAMT's use of reserved areas
+	 * in overlapped TDMRs.
+	 */
+	pamt = alloc_contig_pages(tdmr_pamt_size >> PAGE_SHIFT, GFP_KERNEL,
+			nid, &node_online_map);
+	if (!pamt)
+		return -ENOMEM;
+
+	/*
+	 * Break the contiguous allocation back up into the
+	 * individual PAMTs for each page size.
+	 */
+	tdmr_pamt_base = page_to_pfn(pamt) << PAGE_SHIFT;
+	for (pgsz = TDX_PS_4K; pgsz < TDX_PS_NR; pgsz++) {
+		pamt_base[pgsz] = tdmr_pamt_base;
+		tdmr_pamt_base += pamt_size[pgsz];
+	}
+
+	tdmr->pamt_4k_base = pamt_base[TDX_PS_4K];
+	tdmr->pamt_4k_size = pamt_size[TDX_PS_4K];
+	tdmr->pamt_2m_base = pamt_base[TDX_PS_2M];
+	tdmr->pamt_2m_size = pamt_size[TDX_PS_2M];
+	tdmr->pamt_1g_base = pamt_base[TDX_PS_1G];
+	tdmr->pamt_1g_size = pamt_size[TDX_PS_1G];
+
+	return 0;
+}
+
+static void tdmr_get_pamt(struct tdmr_info *tdmr, unsigned long *pamt_base,
+			  unsigned long *pamt_size)
+{
+	unsigned long pamt_bs, pamt_sz;
+
+	/*
+	 * The PAMT was allocated in one contiguous unit.  The 4K PAMT
+	 * should always point to the beginning of that allocation.
+	 */
+	pamt_bs = tdmr->pamt_4k_base;
+	pamt_sz = tdmr->pamt_4k_size + tdmr->pamt_2m_size + tdmr->pamt_1g_size;
+
+	WARN_ON_ONCE((pamt_bs & ~PAGE_MASK) || (pamt_sz & ~PAGE_MASK));
+
+	*pamt_base = pamt_bs;
+	*pamt_size = pamt_sz;
+}
+
+static void tdmr_do_pamt_func(struct tdmr_info *tdmr,
+		void (*pamt_func)(unsigned long base, unsigned long size))
+{
+	unsigned long pamt_base, pamt_size;
+
+	tdmr_get_pamt(tdmr, &pamt_base, &pamt_size);
+
+	/* Do nothing if PAMT hasn't been allocated for this TDMR */
+	if (!pamt_size)
+		return;
+
+	if (WARN_ON_ONCE(!pamt_base))
+		return;
+
+	pamt_func(pamt_base, pamt_size);
+}
+
+static void free_pamt(unsigned long pamt_base, unsigned long pamt_size)
+{
+	free_contig_range(pamt_base >> PAGE_SHIFT, pamt_size >> PAGE_SHIFT);
+}
+
+static void tdmr_free_pamt(struct tdmr_info *tdmr)
+{
+	tdmr_do_pamt_func(tdmr, free_pamt);
+}
+
+static void tdmrs_free_pamt_all(struct tdmr_info_list *tdmr_list)
+{
+	int i;
+
+	for (i = 0; i < tdmr_list->nr_consumed_tdmrs; i++)
+		tdmr_free_pamt(tdmr_entry(tdmr_list, i));
+}
+
+/* Allocate and set up PAMTs for all TDMRs */
+static int tdmrs_set_up_pamt_all(struct tdmr_info_list *tdmr_list,
+				 struct list_head *tmb_list,
+				 u16 pamt_entry_size[])
+{
+	int i, ret = 0;
+
+	for (i = 0; i < tdmr_list->nr_consumed_tdmrs; i++) {
+		ret = tdmr_set_up_pamt(tdmr_entry(tdmr_list, i), tmb_list,
+				pamt_entry_size);
+		if (ret)
+			goto err;
+	}
+
+	return 0;
+err:
+	tdmrs_free_pamt_all(tdmr_list);
+	return ret;
+}
+
+/*
+ * Convert TDX private pages back to normal by using MOVDIR64B to
+ * clear these pages.  Note this function doesn't flush cache of
+ * these TDX private pages.  The caller should make sure of that.
+ */
+static void reset_tdx_pages(unsigned long base, unsigned long size)
+{
+	const void *zero_page = (const void *)page_address(ZERO_PAGE(0));
+	unsigned long phys, end;
+
+	end = base + size;
+	for (phys = base; phys < end; phys += 64)
+		movdir64b(__va(phys), zero_page);
+
+	/*
+	 * MOVDIR64B uses WC protocol.  Use memory barrier to
+	 * make sure any later user of these pages sees the
+	 * updated data.
+	 */
+	mb();
+}
+
+static void tdmr_reset_pamt(struct tdmr_info *tdmr)
+{
+	tdmr_do_pamt_func(tdmr, reset_tdx_pages);
+}
+
+static void tdmrs_reset_pamt_all(struct tdmr_info_list *tdmr_list)
+{
+	int i;
+
+	for (i = 0; i < tdmr_list->nr_consumed_tdmrs; i++)
+		tdmr_reset_pamt(tdmr_entry(tdmr_list, i));
+}
+
+static unsigned long tdmrs_count_pamt_kb(struct tdmr_info_list *tdmr_list)
+{
+	unsigned long pamt_size = 0;
+	int i;
+
+	for (i = 0; i < tdmr_list->nr_consumed_tdmrs; i++) {
+		unsigned long base, size;
+
+		tdmr_get_pamt(tdmr_entry(tdmr_list, i), &base, &size);
+		pamt_size += size;
+	}
+
+	return pamt_size / 1024;
+}
+
+static int tdmr_add_rsvd_area(struct tdmr_info *tdmr, int *p_idx, u64 addr,
+			      u64 size, u16 max_reserved_per_tdmr)
+{
+	struct tdmr_reserved_area *rsvd_areas = tdmr->reserved_areas;
+	int idx = *p_idx;
+
+	/* Reserved area must be 4K aligned in offset and size */
+	if (WARN_ON(addr & ~PAGE_MASK || size & ~PAGE_MASK))
+		return -EINVAL;
+
+	if (idx >= max_reserved_per_tdmr) {
+		pr_warn("initialization failed: TDMR [0x%llx, 0x%llx): reserved areas exhausted.\n",
+				tdmr->base, tdmr_end(tdmr));
+		return -ENOSPC;
+	}
+
+	/*
+	 * Consume one reserved area per call.  Make no effort to
+	 * optimize or reduce the number of reserved areas which are
+	 * consumed by contiguous reserved areas, for instance.
+	 */
+	rsvd_areas[idx].offset = addr - tdmr->base;
+	rsvd_areas[idx].size = size;
+
+	*p_idx = idx + 1;
+
+	return 0;
+}
+
+/*
+ * Go through @tmb_list to find holes between memory areas.  If any of
+ * those holes fall within @tdmr, set up a TDMR reserved area to cover
+ * the hole.
+ */
+static int tdmr_populate_rsvd_holes(struct list_head *tmb_list,
+				    struct tdmr_info *tdmr,
+				    int *rsvd_idx,
+				    u16 max_reserved_per_tdmr)
+{
+	struct tdx_memblock *tmb;
+	u64 prev_end;
+	int ret;
+
+	/*
+	 * Start looking for reserved blocks at the
+	 * beginning of the TDMR.
+	 */
+	prev_end = tdmr->base;
+	list_for_each_entry(tmb, tmb_list, list) {
+		u64 start, end;
+
+		start = PFN_PHYS(tmb->start_pfn);
+		end   = PFN_PHYS(tmb->end_pfn);
+
+		/* Break if this region is after the TDMR */
+		if (start >= tdmr_end(tdmr))
+			break;
+
+		/* Exclude regions before this TDMR */
+		if (end < tdmr->base)
+			continue;
+
+		/*
+		 * Skip over memory areas that
+		 * have already been dealt with.
+		 */
+		if (start <= prev_end) {
+			prev_end = end;
+			continue;
+		}
+
+		/* Add the hole before this region */
+		ret = tdmr_add_rsvd_area(tdmr, rsvd_idx, prev_end,
+				start - prev_end,
+				max_reserved_per_tdmr);
+		if (ret)
+			return ret;
+
+		prev_end = end;
+	}
+
+	/* Add the hole after the last region if it exists. */
+	if (prev_end < tdmr_end(tdmr)) {
+		ret = tdmr_add_rsvd_area(tdmr, rsvd_idx, prev_end,
+				tdmr_end(tdmr) - prev_end,
+				max_reserved_per_tdmr);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Go through @tdmr_list to find all PAMTs.  If any of those PAMTs
+ * overlaps with @tdmr, set up a TDMR reserved area to cover the
+ * overlapping part.
+ */
+static int tdmr_populate_rsvd_pamts(struct tdmr_info_list *tdmr_list,
+				    struct tdmr_info *tdmr,
+				    int *rsvd_idx,
+				    u16 max_reserved_per_tdmr)
+{
+	int i, ret;
+
+	for (i = 0; i < tdmr_list->nr_consumed_tdmrs; i++) {
+		struct tdmr_info *tmp = tdmr_entry(tdmr_list, i);
+		unsigned long pamt_base, pamt_size, pamt_end;
+
+		tdmr_get_pamt(tmp, &pamt_base, &pamt_size);
+		/* Each TDMR must already have PAMT allocated */
+		WARN_ON_ONCE(!pamt_size || !pamt_base);
+
+		pamt_end = pamt_base + pamt_size;
+		/* Skip PAMTs outside of the given TDMR */
+		if ((pamt_end <= tdmr->base) ||
+				(pamt_base >= tdmr_end(tdmr)))
+			continue;
+
+		/* Only mark the part within the TDMR as reserved */
+		if (pamt_base < tdmr->base)
+			pamt_base = tdmr->base;
+		if (pamt_end > tdmr_end(tdmr))
+			pamt_end = tdmr_end(tdmr);
+
+		ret = tdmr_add_rsvd_area(tdmr, rsvd_idx, pamt_base,
+				pamt_end - pamt_base,
+				max_reserved_per_tdmr);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/* Compare function called by sort() for TDMR reserved areas */
+static int rsvd_area_cmp_func(const void *a, const void *b)
+{
+	struct tdmr_reserved_area *r1 = (struct tdmr_reserved_area *)a;
+	struct tdmr_reserved_area *r2 = (struct tdmr_reserved_area *)b;
+
+	if (r1->offset + r1->size <= r2->offset)
+		return -1;
+	if (r1->offset >= r2->offset + r2->size)
+		return 1;
+
+	/* Reserved areas cannot overlap.  The caller must guarantee. */
+	WARN_ON_ONCE(1);
+	return -1;
+}
+
+/*
+ * Populate reserved areas for the given @tdmr, including memory holes
+ * (via @tmb_list) and PAMTs (via @tdmr_list).
+ */
+static int tdmr_populate_rsvd_areas(struct tdmr_info *tdmr,
+				    struct list_head *tmb_list,
+				    struct tdmr_info_list *tdmr_list,
+				    u16 max_reserved_per_tdmr)
+{
+	int ret, rsvd_idx = 0;
+
+	ret = tdmr_populate_rsvd_holes(tmb_list, tdmr, &rsvd_idx,
+			max_reserved_per_tdmr);
+	if (ret)
+		return ret;
+
+	ret = tdmr_populate_rsvd_pamts(tdmr_list, tdmr, &rsvd_idx,
+			max_reserved_per_tdmr);
+	if (ret)
+		return ret;
+
+	/* TDX requires reserved areas listed in address ascending order */
+	sort(tdmr->reserved_areas, rsvd_idx, sizeof(struct tdmr_reserved_area),
+			rsvd_area_cmp_func, NULL);
+
+	return 0;
+}
+
+/*
+ * Populate reserved areas for all TDMRs in @tdmr_list, including memory
+ * holes (via @tmb_list) and PAMTs.
+ */
+static int tdmrs_populate_rsvd_areas_all(struct tdmr_info_list *tdmr_list,
+					 struct list_head *tmb_list,
+					 u16 max_reserved_per_tdmr)
+{
+	int i;
+
+	for (i = 0; i < tdmr_list->nr_consumed_tdmrs; i++) {
+		int ret;
+
+		ret = tdmr_populate_rsvd_areas(tdmr_entry(tdmr_list, i),
+				tmb_list, tdmr_list, max_reserved_per_tdmr);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Construct a list of TDMRs on the preallocated space in @tdmr_list
+ * to cover all TDX memory regions in @tmb_list based on the TDX module
+ * TDMR global information in @tdmr_sysinfo.
+ */
+static int construct_tdmrs(struct list_head *tmb_list,
+			   struct tdmr_info_list *tdmr_list,
+			   struct tdx_tdmr_sysinfo *tdmr_sysinfo)
+{
+	int ret;
+
+	ret = fill_out_tdmrs(tmb_list, tdmr_list);
+	if (ret)
+		return ret;
+
+	ret = tdmrs_set_up_pamt_all(tdmr_list, tmb_list,
+			tdmr_sysinfo->pamt_entry_size);
+	if (ret)
+		return ret;
+
+	ret = tdmrs_populate_rsvd_areas_all(tdmr_list, tmb_list,
+			tdmr_sysinfo->max_reserved_per_tdmr);
+	if (ret)
+		tdmrs_free_pamt_all(tdmr_list);
+
+	/*
+	 * The tdmr_info_list is read-only from here on out.
+	 * Ensure that these writes are seen by other CPUs.
+	 * Pairs with a smp_rmb() in is_pamt_page().
+	 */
+	smp_wmb();
+
+	return ret;
+}
+
+static int config_tdx_module(struct tdmr_info_list *tdmr_list, u64 global_keyid)
+{
+	struct tdx_module_args args = {};
+	u64 *tdmr_pa_array;
+	size_t array_sz;
+	int i, ret;
+
+	/*
+	 * TDMRs are passed to the TDX module via an array of physical
+	 * addresses of each TDMR.  The array itself also has certain
+	 * alignment requirement.
+	 */
+	array_sz = tdmr_list->nr_consumed_tdmrs * sizeof(u64);
+	array_sz = roundup_pow_of_two(array_sz);
+	if (array_sz < TDMR_INFO_PA_ARRAY_ALIGNMENT)
+		array_sz = TDMR_INFO_PA_ARRAY_ALIGNMENT;
+
+	tdmr_pa_array = kzalloc(array_sz, GFP_KERNEL);
+	if (!tdmr_pa_array)
+		return -ENOMEM;
+
+	for (i = 0; i < tdmr_list->nr_consumed_tdmrs; i++)
+		tdmr_pa_array[i] = __pa(tdmr_entry(tdmr_list, i));
+
+	args.rcx = __pa(tdmr_pa_array);
+	args.rdx = tdmr_list->nr_consumed_tdmrs;
+	args.r8 = global_keyid;
+	ret = seamcall_prerr(TDH_SYS_CONFIG, &args);
+
+	/* Free the array as it is not required anymore. */
+	kfree(tdmr_pa_array);
+
+	return ret;
+}
+
+static int do_global_key_config(void *unused)
+{
+	struct tdx_module_args args = {};
+
+	return seamcall_prerr(TDH_SYS_KEY_CONFIG, &args);
+}
+
+/*
+ * Attempt to configure the global KeyID on all physical packages.
+ *
+ * This requires running code on at least one CPU in each package.
+ * TDMR initialization) will fail will fail if any package in the
+ * system has no online CPUs.
+ *
+ * This code takes no affirmative steps to online CPUs.  Callers (aka.
+ * KVM) can ensure success by ensuring sufficient CPUs are online and
+ * can run SEAMCALLs.
+ */
+static int config_global_keyid(void)
+{
+	cpumask_var_t packages;
+	int cpu, ret = -EINVAL;
+
+	if (!zalloc_cpumask_var(&packages, GFP_KERNEL))
+		return -ENOMEM;
+
+	/*
+	 * Hardware doesn't guarantee cache coherency across different
+	 * KeyIDs.  The kernel needs to flush PAMT's dirty cachelines
+	 * (associated with KeyID 0) before the TDX module can use the
+	 * global KeyID to access the PAMT.  Given PAMTs are potentially
+	 * large (~1/256th of system RAM), just use WBINVD.
+	 */
+	wbinvd_on_all_cpus();
+
+	for_each_online_cpu(cpu) {
+		/*
+		 * The key configuration only needs to be done once per
+		 * package and will return an error if configured more
+		 * than once.  Avoid doing it multiple times per package.
+		 */
+		if (cpumask_test_and_set_cpu(topology_physical_package_id(cpu),
+					packages))
+			continue;
+
+		/*
+		 * TDH.SYS.KEY.CONFIG cannot run concurrently on
+		 * different cpus.  Do it one by one.
+		 */
+		ret = smp_call_on_cpu(cpu, do_global_key_config, NULL, true);
+		if (ret)
+			break;
+	}
+
+	free_cpumask_var(packages);
+	return ret;
+}
+
+static int init_tdmr(struct tdmr_info *tdmr)
+{
+	u64 next;
+
+	/*
+	 * Initializing a TDMR can be time consuming.  To avoid long
+	 * SEAMCALLs, the TDX module may only initialize a part of the
+	 * TDMR in each call.
+	 */
+	do {
+		struct tdx_module_args args = {
+			.rcx = tdmr->base,
+		};
+		int ret;
+
+		ret = seamcall_prerr_ret(TDH_SYS_TDMR_INIT, &args);
+		if (ret)
+			return ret;
+		/*
+		 * RDX contains 'next-to-initialize' address if
+		 * TDH.SYS.TDMR.INIT did not fully complete and
+		 * should be retried.
+		 */
+		next = args.rdx;
+		cond_resched();
+		/* Keep making SEAMCALLs until the TDMR is done */
+	} while (next < tdmr->base + tdmr->size);
+
+	return 0;
+}
+
+static int init_tdmrs(struct tdmr_info_list *tdmr_list)
+{
+	int i;
+
+	/*
+	 * This operation is costly.  It can be parallelized,
+	 * but keep it simple for now.
+	 */
+	for (i = 0; i < tdmr_list->nr_consumed_tdmrs; i++) {
+		int ret;
+
+		ret = init_tdmr(tdmr_entry(tdmr_list, i));
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int init_tdx_module(void)
+{
+	struct tdx_tdmr_sysinfo tdmr_sysinfo;
+	int ret;
+
+	/*
+	 * To keep things simple, assume that all TDX-protected memory
+	 * will come from the page allocator.  Make sure all pages in the
+	 * page allocator are TDX-usable memory.
+	 *
+	 * Build the list of "TDX-usable" memory regions which cover all
+	 * pages in the page allocator to guarantee that.  Do it while
+	 * holding mem_hotplug_lock read-lock as the memory hotplug code
+	 * path reads the @tdx_memlist to reject any new memory.
+	 */
+	get_online_mems();
+
+	ret = build_tdx_memlist(&tdx_memlist);
+	if (ret)
+		goto out_put_tdxmem;
+
+	ret = get_tdx_tdmr_sysinfo(&tdmr_sysinfo);
+	if (ret)
+		goto err_free_tdxmem;
+
+	/* Allocate enough space for constructing TDMRs */
+	ret = alloc_tdmr_list(&tdx_tdmr_list, &tdmr_sysinfo);
+	if (ret)
+		goto err_free_tdxmem;
+
+	/* Cover all TDX-usable memory regions in TDMRs */
+	ret = construct_tdmrs(&tdx_memlist, &tdx_tdmr_list, &tdmr_sysinfo);
+	if (ret)
+		goto err_free_tdmrs;
+
+	/* Pass the TDMRs and the global KeyID to the TDX module */
+	ret = config_tdx_module(&tdx_tdmr_list, tdx_global_keyid);
+	if (ret)
+		goto err_free_pamts;
+
+	/* Config the key of global KeyID on all packages */
+	ret = config_global_keyid();
+	if (ret)
+		goto err_reset_pamts;
+
+	/* Initialize TDMRs to complete the TDX module initialization */
+	ret = init_tdmrs(&tdx_tdmr_list);
+	if (ret)
+		goto err_reset_pamts;
+
+	pr_info("%lu KB allocated for PAMT\n", tdmrs_count_pamt_kb(&tdx_tdmr_list));
+
+out_put_tdxmem:
+	/*
+	 * @tdx_memlist is written here and read at memory hotplug time.
+	 * Lock out memory hotplug code while building it.
+	 */
+	put_online_mems();
+	return ret;
+
+err_reset_pamts:
+	/*
+	 * Part of PAMTs may already have been initialized by the
+	 * TDX module.  Flush cache before returning PAMTs back
+	 * to the kernel.
+	 */
+	wbinvd_on_all_cpus();
+	/*
+	 * According to the TDX hardware spec, if the platform
+	 * doesn't have the "partial write machine check"
+	 * erratum, any kernel read/write will never cause #MC
+	 * in kernel space, thus it's OK to not convert PAMTs
+	 * back to normal.  But do the conversion anyway here
+	 * as suggested by the TDX spec.
+	 */
+	tdmrs_reset_pamt_all(&tdx_tdmr_list);
+err_free_pamts:
+	tdmrs_free_pamt_all(&tdx_tdmr_list);
+err_free_tdmrs:
+	free_tdmr_list(&tdx_tdmr_list);
+err_free_tdxmem:
+	free_tdx_memlist(&tdx_memlist);
+	goto out_put_tdxmem;
+}
+
+static int __tdx_enable(void)
+{
+	int ret;
+
+	ret = init_tdx_module();
+	if (ret) {
+		pr_err("module initialization failed (%d)\n", ret);
+		tdx_module_status = TDX_MODULE_ERROR;
+		return ret;
+	}
+
+	pr_info("module initialized\n");
+	tdx_module_status = TDX_MODULE_INITIALIZED;
+
+	return 0;
+}
+
+/**
+ * tdx_enable - Enable TDX module to make it ready to run TDX guests
+ *
+ * This function assumes the caller has: 1) held read lock of CPU hotplug
+ * lock to prevent any new cpu from becoming online; 2) done both VMXON
+ * and tdx_cpu_enable() on all online cpus.
+ *
+ * This function requires there's at least one online cpu for each CPU
+ * package to succeed.
+ *
+ * This function can be called in parallel by multiple callers.
+ *
+ * Return 0 if TDX is enabled successfully, otherwise error.
+ */
+int tdx_enable(void)
+{
+	int ret;
+
+	if (!boot_cpu_has(X86_FEATURE_TDX_HOST_PLATFORM))
+		return -ENODEV;
+
+	lockdep_assert_cpus_held();
+
+	mutex_lock(&tdx_module_lock);
+
+	switch (tdx_module_status) {
+	case TDX_MODULE_UNINITIALIZED:
+		ret = __tdx_enable();
+		break;
+	case TDX_MODULE_INITIALIZED:
+		/* Already initialized, great, tell the caller. */
+		ret = 0;
+		break;
+	default:
+		/* Failed to initialize in the previous attempts */
+		ret = -EINVAL;
+		break;
+	}
+
+	mutex_unlock(&tdx_module_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tdx_enable);
+
+static bool is_pamt_page(unsigned long phys)
+{
+	struct tdmr_info_list *tdmr_list = &tdx_tdmr_list;
+	int i;
+
+	/* Ensure that all remote 'tdmr_list' writes are visible: */
+	smp_rmb();
+
+	/*
+	 * The TDX module is no longer returning TDX_SYS_NOT_READY and
+	 * is initialized.  The 'tdmr_list' was initialized long ago
+	 * and is now read-only.
+	 */
+	for (i = 0; i < tdmr_list->nr_consumed_tdmrs; i++) {
+		unsigned long base, size;
+
+		tdmr_get_pamt(tdmr_entry(tdmr_list, i), &base, &size);
+
+		if (phys >= base && phys < (base + size))
+			return true;
+	}
+
+	return false;
+}
+
+/*
+ * Return whether the memory page at the given physical address is TDX
+ * private memory or not.
+ *
+ * This can be imprecise for two known reasons:
+ * 1. PAMTs are private memory and exist before the TDX module is
+ *    ready and TDH_PHYMEM_PAGE_RDMD works.  This is a relatively
+ *    short window that occurs once per boot.
+ * 2. TDH_PHYMEM_PAGE_RDMD reflects the TDX module's knowledge of the
+ *    page.  However, the page can still cause #MC until it has been
+ *    fully converted to shared using 64-byte writes like MOVDIR64B.
+ *    Buggy hosts might still leave #MC-causing memory in place which
+ *    this function can not detect.
+ */
+static bool paddr_is_tdx_private(unsigned long phys)
+{
+	struct tdx_module_args args = {
+		.rcx = phys & PAGE_MASK,
+	};
+	u64 sret;
+
+	if (!boot_cpu_has(X86_FEATURE_TDX_HOST_PLATFORM))
+		return false;
+
+	/* Get page type from the TDX module */
+	sret = __seamcall_ret(TDH_PHYMEM_PAGE_RDMD, &args);
+
+	/*
+	 * The SEAMCALL will not return success unless there is a
+	 * working, "ready" TDX module.  Assume an absence of TDX
+	 * private pages until SEAMCALL is working.
+	 */
+	if (sret)
+		return false;
+
+	/*
+	 * SEAMCALL was successful -- read page type (via RCX):
+	 *
+	 *  - PT_NDA:	Page is not used by the TDX module
+	 *  - PT_RSVD:	Reserved for Non-TDX use
+	 *  - Others:	Page is used by the TDX module
+	 *
+	 * Note PAMT pages are marked as PT_RSVD but they are also TDX
+	 * private memory.
+	 */
+	switch (args.rcx) {
+	case PT_NDA:
+		return false;
+	case PT_RSVD:
+		return is_pamt_page(phys);
+	default:
+		return true;
+	}
+}
+
+/*
+ * Some TDX-capable CPUs have an erratum.  A write to TDX private
+ * memory poisons that memory, and a subsequent read of that memory
+ * triggers #MC.
+ *
+ * Help distinguish erratum-triggered #MCs from a normal hardware one.
+ * Just print additional message to show such #MC may be result of the
+ * erratum.
+ */
+const char *tdx_dump_mce_info(struct mce *m)
+{
+	if (!m || !mce_is_memory_error(m) || !mce_usable_address(m))
+		return NULL;
+
+	if (!paddr_is_tdx_private(m->addr))
+		return NULL;
+
+	return "TDX private memory error. Possible kernel bug.";
+}
+
+static __init int record_keyid_partitioning(u32 *tdx_keyid_start,
+					    u32 *nr_tdx_keyids)
+{
+	u32 _nr_mktme_keyids, _tdx_keyid_start, _nr_tdx_keyids;
+	int ret;
+
+	/*
+	 * IA32_MKTME_KEYID_PARTIONING:
+	 *   Bit [31:0]:	Number of MKTME KeyIDs.
+	 *   Bit [63:32]:	Number of TDX private KeyIDs.
+	 */
+	ret = rdmsr_safe(MSR_IA32_MKTME_KEYID_PARTITIONING, &_nr_mktme_keyids,
+			&_nr_tdx_keyids);
+	if (ret || !_nr_tdx_keyids)
+		return -EINVAL;
+
+	/* TDX KeyIDs start after the last MKTME KeyID. */
+	_tdx_keyid_start = _nr_mktme_keyids + 1;
+
+	*tdx_keyid_start = _tdx_keyid_start;
+	*nr_tdx_keyids = _nr_tdx_keyids;
+
+	return 0;
+}
+
+static bool is_tdx_memory(unsigned long start_pfn, unsigned long end_pfn)
+{
+	struct tdx_memblock *tmb;
+
+	/*
+	 * This check assumes that the start_pfn<->end_pfn range does not
+	 * cross multiple @tdx_memlist entries.  A single memory online
+	 * event across multiple memblocks (from which @tdx_memlist
+	 * entries are derived at the time of module initialization) is
+	 * not possible.  This is because memory offline/online is done
+	 * on granularity of 'struct memory_block', and the hotpluggable
+	 * memory region (one memblock) must be multiple of memory_block.
+	 */
+	list_for_each_entry(tmb, &tdx_memlist, list) {
+		if (start_pfn >= tmb->start_pfn && end_pfn <= tmb->end_pfn)
+			return true;
+	}
+	return false;
+}
+
+static int tdx_memory_notifier(struct notifier_block *nb, unsigned long action,
+			       void *v)
+{
+	struct memory_notify *mn = v;
+
+	if (action != MEM_GOING_ONLINE)
+		return NOTIFY_OK;
+
+	/*
+	 * Empty list means TDX isn't enabled.  Allow any memory
+	 * to go online.
+	 */
+	if (list_empty(&tdx_memlist))
+		return NOTIFY_OK;
+
+	/*
+	 * The TDX memory configuration is static and can not be
+	 * changed.  Reject onlining any memory which is outside of
+	 * the static configuration whether it supports TDX or not.
+	 */
+	if (is_tdx_memory(mn->start_pfn, mn->start_pfn + mn->nr_pages))
+		return NOTIFY_OK;
+
+	return NOTIFY_BAD;
+}
+
+static struct notifier_block tdx_memory_nb = {
+	.notifier_call = tdx_memory_notifier,
+};
+
+static void __init check_tdx_erratum(void)
+{
+	/*
+	 * These CPUs have an erratum.  A partial write from non-TD
+	 * software (e.g. via MOVNTI variants or UC/WC mapping) to TDX
+	 * private memory poisons that memory, and a subsequent read of
+	 * that memory triggers #MC.
+	 */
+	switch (boot_cpu_data.x86_model) {
+	case INTEL_FAM6_SAPPHIRERAPIDS_X:
+	case INTEL_FAM6_EMERALDRAPIDS_X:
+		setup_force_cpu_bug(X86_BUG_TDX_PW_MCE);
+	}
+}
+
+void __init tdx_init(void)
+{
+	u32 tdx_keyid_start, nr_tdx_keyids;
+	int err;
+
+	err = record_keyid_partitioning(&tdx_keyid_start, &nr_tdx_keyids);
+	if (err)
+		return;
+
+	pr_info("BIOS enabled: private KeyID range [%u, %u)\n",
+			tdx_keyid_start, tdx_keyid_start + nr_tdx_keyids);
+
+	/*
+	 * The TDX module itself requires one 'global KeyID' to protect
+	 * its metadata.  If there's only one TDX KeyID, there won't be
+	 * any left for TDX guests thus there's no point to enable TDX
+	 * at all.
+	 */
+	if (nr_tdx_keyids < 2) {
+		pr_err("initialization failed: too few private KeyIDs available.\n");
+		return;
+	}
+
+	/*
+	 * At this point, hibernation_available() indicates whether or
+	 * not hibernation support has been permanently disabled.
+	 */
+	if (hibernation_available()) {
+		pr_err("initialization failed: Hibernation support is enabled\n");
+		return;
+	}
+
+	err = register_memory_notifier(&tdx_memory_nb);
+	if (err) {
+		pr_err("initialization failed: register_memory_notifier() failed (%d)\n",
+				err);
+		return;
+	}
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_SUSPEND)
+	pr_info("Disable ACPI S3. Turn off TDX in the BIOS to use ACPI S3.\n");
+	acpi_suspend_lowlevel = NULL;
+#endif
+
+	/*
+	 * Just use the first TDX KeyID as the 'global KeyID' and
+	 * leave the rest for TDX guests.
+	 */
+	tdx_global_keyid = tdx_keyid_start;
+	tdx_guest_keyid_start = tdx_keyid_start + 1;
+	tdx_nr_guest_keyids = nr_tdx_keyids - 1;
+
+	setup_force_cpu_cap(X86_FEATURE_TDX_HOST_PLATFORM);
+
+	check_tdx_erratum();
+}
diff --git a/arch/x86/virt/vmx/tdx/tdx.h b/arch/x86/virt/vmx/tdx/tdx.h
new file mode 100644
index 000000000000..b701f69485d3
--- /dev/null
+++ b/arch/x86/virt/vmx/tdx/tdx.h
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _X86_VIRT_TDX_H
+#define _X86_VIRT_TDX_H
+
+#include <linux/bits.h>
+
+/*
+ * This file contains both macros and data structures defined by the TDX
+ * architecture and Linux defined software data structures and functions.
+ * The two should not be mixed together for better readability.  The
+ * architectural definitions come first.
+ */
+
+/*
+ * TDX module SEAMCALL leaf functions
+ */
+#define TDH_PHYMEM_PAGE_RDMD	24
+#define TDH_SYS_KEY_CONFIG	31
+#define TDH_SYS_INIT		33
+#define TDH_SYS_RD		34
+#define TDH_SYS_LP_INIT		35
+#define TDH_SYS_TDMR_INIT	36
+#define TDH_SYS_CONFIG		45
+
+/* TDX page types */
+#define	PT_NDA		0x0
+#define	PT_RSVD		0x1
+
+/*
+ * Global scope metadata field ID.
+ *
+ * See Table "Global Scope Metadata", TDX module 1.5 ABI spec.
+ */
+#define MD_FIELD_ID_MAX_TDMRS			0x9100000100000008ULL
+#define MD_FIELD_ID_MAX_RESERVED_PER_TDMR	0x9100000100000009ULL
+#define MD_FIELD_ID_PAMT_4K_ENTRY_SIZE		0x9100000100000010ULL
+#define MD_FIELD_ID_PAMT_2M_ENTRY_SIZE		0x9100000100000011ULL
+#define MD_FIELD_ID_PAMT_1G_ENTRY_SIZE		0x9100000100000012ULL
+
+/*
+ * Sub-field definition of metadata field ID.
+ *
+ * See Table "MD_FIELD_ID (Metadata Field Identifier / Sequence Header)
+ * Definition", TDX module 1.5 ABI spec.
+ *
+ *  - Bit 33:32: ELEMENT_SIZE_CODE -- size of a single element of metadata
+ *
+ *	0: 8 bits
+ *	1: 16 bits
+ *	2: 32 bits
+ *	3: 64 bits
+ */
+#define MD_FIELD_ID_ELE_SIZE_CODE(_field_id)	\
+		(((_field_id) & GENMASK_ULL(33, 32)) >> 32)
+
+#define MD_FIELD_ID_ELE_SIZE_16BIT	1
+
+struct tdmr_reserved_area {
+	u64 offset;
+	u64 size;
+} __packed;
+
+#define TDMR_INFO_ALIGNMENT	512
+#define TDMR_INFO_PA_ARRAY_ALIGNMENT	512
+
+struct tdmr_info {
+	u64 base;
+	u64 size;
+	u64 pamt_1g_base;
+	u64 pamt_1g_size;
+	u64 pamt_2m_base;
+	u64 pamt_2m_size;
+	u64 pamt_4k_base;
+	u64 pamt_4k_size;
+	/*
+	 * The actual number of reserved areas depends on the value of
+	 * field MD_FIELD_ID_MAX_RESERVED_PER_TDMR in the TDX module
+	 * global metadata.
+	 */
+	DECLARE_FLEX_ARRAY(struct tdmr_reserved_area, reserved_areas);
+} __packed __aligned(TDMR_INFO_ALIGNMENT);
+
+/*
+ * Do not put any hardware-defined TDX structure representations below
+ * this comment!
+ */
+
+/* Kernel defined TDX module status during module initialization. */
+enum tdx_module_status_t {
+	TDX_MODULE_UNINITIALIZED,
+	TDX_MODULE_INITIALIZED,
+	TDX_MODULE_ERROR
+};
+
+struct tdx_memblock {
+	struct list_head list;
+	unsigned long start_pfn;
+	unsigned long end_pfn;
+	int nid;
+};
+
+/* "TDMR info" part of "Global Scope Metadata" for constructing TDMRs */
+struct tdx_tdmr_sysinfo {
+	u16 max_tdmrs;
+	u16 max_reserved_per_tdmr;
+	u16 pamt_entry_size[TDX_PS_NR];
+};
+
+/* Warn if kernel has less than TDMR_NR_WARN TDMRs after allocation */
+#define TDMR_NR_WARN 4
+
+struct tdmr_info_list {
+	void *tdmrs;	/* Flexible array to hold 'tdmr_info's */
+	int nr_consumed_tdmrs;	/* How many 'tdmr_info's are in use */
+
+	/* Metadata for finding target 'tdmr_info' and freeing @tdmrs */
+	int tdmr_sz;	/* Size of one 'tdmr_info' */
+	int max_tdmrs;	/* How many 'tdmr_info's are allocated */
+};
+
+#endif
diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c
index 6092fea7d651..39982f955cfe 100644
--- a/arch/x86/xen/irq.c
+++ b/arch/x86/xen/irq.c
@@ -45,7 +45,7 @@ static const typeof(pv_ops) xen_irq_ops __initconst = {
 		/* Initial interrupt flag handling only called while interrupts off. */
 		.save_fl = __PV_IS_CALLEE_SAVE(paravirt_ret0),
 		.irq_disable = __PV_IS_CALLEE_SAVE(paravirt_nop),
-		.irq_enable = __PV_IS_CALLEE_SAVE(paravirt_BUG),
+		.irq_enable = __PV_IS_CALLEE_SAVE(BUG_func),
 
 		.safe_halt = xen_safe_halt,
 		.halt = xen_halt,
diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c
index b6830554ff69..72af496a160c 100644
--- a/arch/x86/xen/mmu_pv.c
+++ b/arch/x86/xen/mmu_pv.c
@@ -34,7 +34,7 @@
  * would need to validate the whole pagetable before going on.
  * Naturally, this is quite slow.  The solution is to "pin" a
  * pagetable, which enforces all the constraints on the pagetable even
- * when it is not actively in use.  This menas that Xen can be assured
+ * when it is not actively in use.  This means that Xen can be assured
  * that it is still valid when you do load it into %cr3, and doesn't
  * need to revalidate it.
  *
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 4b0d6fff88de..1fb9a1644d94 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -65,6 +65,8 @@ int xen_smp_intr_init(unsigned int cpu)
 	char *resched_name, *callfunc_name, *debug_name;
 
 	resched_name = kasprintf(GFP_KERNEL, "resched%d", cpu);
+	if (!resched_name)
+		goto fail_mem;
 	per_cpu(xen_resched_irq, cpu).name = resched_name;
 	rc = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR,
 				    cpu,
@@ -77,6 +79,8 @@ int xen_smp_intr_init(unsigned int cpu)
 	per_cpu(xen_resched_irq, cpu).irq = rc;
 
 	callfunc_name = kasprintf(GFP_KERNEL, "callfunc%d", cpu);
+	if (!callfunc_name)
+		goto fail_mem;
 	per_cpu(xen_callfunc_irq, cpu).name = callfunc_name;
 	rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_VECTOR,
 				    cpu,
@@ -90,6 +94,9 @@ int xen_smp_intr_init(unsigned int cpu)
 
 	if (!xen_fifo_events) {
 		debug_name = kasprintf(GFP_KERNEL, "debug%d", cpu);
+		if (!debug_name)
+			goto fail_mem;
+
 		per_cpu(xen_debug_irq, cpu).name = debug_name;
 		rc = bind_virq_to_irqhandler(VIRQ_DEBUG, cpu,
 					     xen_debug_interrupt,
@@ -101,6 +108,9 @@ int xen_smp_intr_init(unsigned int cpu)
 	}
 
 	callfunc_name = kasprintf(GFP_KERNEL, "callfuncsingle%d", cpu);
+	if (!callfunc_name)
+		goto fail_mem;
+
 	per_cpu(xen_callfuncsingle_irq, cpu).name = callfunc_name;
 	rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_SINGLE_VECTOR,
 				    cpu,
@@ -114,6 +124,8 @@ int xen_smp_intr_init(unsigned int cpu)
 
 	return 0;
 
+ fail_mem:
+	rc = -ENOMEM;
  fail:
 	xen_smp_intr_free(cpu);
 	return rc;
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 7d792077e5fd..6f248d87e496 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -144,7 +144,7 @@ config XTENSA_VARIANT_CUSTOM_NAME
 	depends on XTENSA_VARIANT_CUSTOM
 	help
 	  Provide the name of a custom Xtensa processor variant.
-	  This CORENAME selects arch/xtensa/variant/CORENAME.
+	  This CORENAME selects arch/xtensa/variants/CORENAME.
 	  Don't forget you have to select MMU if you have one.
 
 config XTENSA_VARIANT_NAME
@@ -793,7 +793,7 @@ config ARCH_FORCE_MAX_ORDER
 	default "10"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index bfd8e433ed62..4c14a02179eb 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -35,15 +35,19 @@ KBUILD_CFLAGS += -ffreestanding -D__linux__
 KBUILD_CFLAGS += -pipe -mlongcalls -mtext-section-literals
 KBUILD_CFLAGS += $(call cc-option,-mforce-no-pic,)
 KBUILD_CFLAGS += $(call cc-option,-mno-serialize-volatile,)
+KBUILD_CFLAGS += $(call cc-option,-mno-fdpic,)
 ifneq ($(CONFIG_KERNEL_ABI_CALL0),)
 KBUILD_CFLAGS += -mabi=call0
 KBUILD_AFLAGS += -mabi=call0
 endif
 
 KBUILD_AFLAGS += -mlongcalls -mtext-section-literals
+KBUILD_AFLAGS += $(call cc-option,-mno-fdpic,)
+
+KBUILD_LDFLAGS += -m elf32xtensa
 
 ifneq ($(CONFIG_LD_NO_RELAX),)
-KBUILD_LDFLAGS := --no-relax
+KBUILD_LDFLAGS += --no-relax
 endif
 
 CHECKFLAGS += -D$(if $(CONFIG_CPU_BIG_ENDIAN),__XTENSA_EB__,__XTENSA_EL__)
diff --git a/arch/xtensa/include/asm/asmmacro.h b/arch/xtensa/include/asm/asmmacro.h
index 01bf7d9dbb19..a52d49a16ce7 100644
--- a/arch/xtensa/include/asm/asmmacro.h
+++ b/arch/xtensa/include/asm/asmmacro.h
@@ -11,7 +11,7 @@
 #ifndef _XTENSA_ASMMACRO_H
 #define _XTENSA_ASMMACRO_H
 
-#include <asm-generic/export.h>
+#include <linux/export.h>
 #include <asm/core.h>
 
 /*
diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h
index 785a00ce83c1..38bcecb0e457 100644
--- a/arch/xtensa/include/asm/cacheflush.h
+++ b/arch/xtensa/include/asm/cacheflush.h
@@ -116,8 +116,9 @@ void flush_cache_page(struct vm_area_struct*,
 #define flush_cache_mm(mm)		flush_cache_all()
 #define flush_cache_dup_mm(mm)		flush_cache_mm(mm)
 
-#define flush_cache_vmap(start,end)	flush_cache_all()
-#define flush_cache_vunmap(start,end)	flush_cache_all()
+#define flush_cache_vmap(start,end)		flush_cache_all()
+#define flush_cache_vmap_early(start,end)	do { } while (0)
+#define flush_cache_vunmap(start,end)		flush_cache_all()
 
 void flush_dcache_folio(struct folio *folio);
 #define flush_dcache_folio flush_dcache_folio
@@ -140,6 +141,7 @@ void local_flush_cache_page(struct vm_area_struct *vma,
 #define flush_cache_dup_mm(mm)				do { } while (0)
 
 #define flush_cache_vmap(start,end)			do { } while (0)
+#define flush_cache_vmap_early(start,end)		do { } while (0)
 #define flush_cache_vunmap(start,end)			do { } while (0)
 
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
diff --git a/arch/xtensa/include/asm/jump_label.h b/arch/xtensa/include/asm/jump_label.h
index c812bf85021c..46c8596259d2 100644
--- a/arch/xtensa/include/asm/jump_label.h
+++ b/arch/xtensa/include/asm/jump_label.h
@@ -13,7 +13,7 @@
 static __always_inline bool arch_static_branch(struct static_key *key,
 					       bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 			  "_nop\n\t"
 			  ".pushsection __jump_table,  \"aw\"\n\t"
 			  ".word 1b, %l[l_yes], %c0\n\t"
@@ -38,7 +38,7 @@ static __always_inline bool arch_static_branch_jump(struct static_key *key,
 	 * make it reachable and wrap both into a no-transform block
 	 * to avoid any assembler interference with this.
 	 */
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 			  ".begin no-transform\n\t"
 			  "_j %l[l_yes]\n\t"
 			  "2:\n\t"
diff --git a/arch/xtensa/include/asm/kasan.h b/arch/xtensa/include/asm/kasan.h
index 216b6f32c375..8d2b4248466f 100644
--- a/arch/xtensa/include/asm/kasan.h
+++ b/arch/xtensa/include/asm/kasan.h
@@ -18,6 +18,8 @@
 #define KASAN_SHADOW_START (XCHAL_PAGE_TABLE_VADDR + XCHAL_PAGE_TABLE_SIZE)
 /* Size of the shadow map */
 #define KASAN_SHADOW_SIZE (-KASAN_START_VADDR >> KASAN_SHADOW_SCALE_SHIFT)
+/* End of the shadow map */
+#define KASAN_SHADOW_END (KASAN_SHADOW_START + KASAN_SHADOW_SIZE)
 /* Offset for mem to shadow address transformation */
 #define KASAN_SHADOW_OFFSET __XTENSA_UL_CONST(CONFIG_KASAN_SHADOW_OFFSET)
 
diff --git a/arch/xtensa/kernel/syscalls/syscall.tbl b/arch/xtensa/kernel/syscalls/syscall.tbl
index 06eefa9c1458..dd116598fb25 100644
--- a/arch/xtensa/kernel/syscalls/syscall.tbl
+++ b/arch/xtensa/kernel/syscalls/syscall.tbl
@@ -427,3 +427,8 @@
 454	common	futex_wake			sys_futex_wake
 455	common	futex_wait			sys_futex_wait
 456	common	futex_requeue			sys_futex_requeue
+457	common	statmount			sys_statmount
+458	common	listmount			sys_listmount
+459	common	lsm_get_self_attr		sys_lsm_get_self_attr
+460	common	lsm_set_self_attr		sys_lsm_set_self_attr
+461	common	lsm_list_modules		sys_lsm_list_modules
diff --git a/arch/xtensa/lib/pci-auto.c b/arch/xtensa/lib/pci-auto.c
index aa6752237985..05fc02f9e1c7 100644
--- a/arch/xtensa/lib/pci-auto.c
+++ b/arch/xtensa/lib/pci-auto.c
@@ -11,6 +11,7 @@
  * Based on work from Matt Porter <mporter@mvista.com>
  */
 
+#include <linux/bitfield.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>
@@ -222,10 +223,11 @@ pciauto_postscan_setup_bridge(struct pci_dev *dev, int current_bus, int sub_bus,
 
 int __init pciauto_bus_scan(struct pci_controller *pci_ctrl, int current_bus)
 {
-	int sub_bus, pci_devfn, pci_class, cmdstat, found_multi=0;
+	int sub_bus, pci_devfn, pci_class, cmdstat;
 	unsigned short vid;
 	unsigned char header_type;
 	struct pci_dev *dev = &pciauto_dev;
+	bool found_multi = false;
 
 	pciauto_dev.bus = &pciauto_bus;
 	pciauto_dev.sysdata = pci_ctrl;
@@ -261,11 +263,11 @@ int __init pciauto_bus_scan(struct pci_controller *pci_ctrl, int current_bus)
 			continue;
 
 		if (!PCI_FUNC(pci_devfn))
-			found_multi = header_type & 0x80;
+			found_multi = FIELD_GET(PCI_HEADER_TYPE_MFD, header_type);
 		pci_read_config_word(dev, PCI_VENDOR_ID, &vid);
 
 		if (vid == 0xffff || vid == 0x0000) {
-			found_multi = 0;
+			found_multi = false;
 			continue;
 		}
 
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index 7d1f8b398a46..8896e691c051 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -65,7 +65,7 @@ static void rs_poll(struct timer_list *unused)
 	struct tty_port *port = &serial_port;
 	int i = 0;
 	int rd = 1;
-	unsigned char c;
+	u8 c;
 
 	while (simc_poll(0)) {
 		rd = simc_read(0, &c, 1);