diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/ipq5018.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/ipq5018.dtsi | 142 |
1 files changed, 142 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index 38ffdc3cbdcd..32b178b639f0 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -5,6 +5,7 @@ * Copyright (c) 2023 The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,apss-ipq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-ipq5018.h> #include <dt-bindings/reset/qcom,gcc-ipq5018.h> @@ -36,6 +37,8 @@ reg = <0x0>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; }; CPU1: cpu@1 { @@ -44,6 +47,8 @@ reg = <0x1>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; }; L2_0: l2-cache { @@ -54,6 +59,23 @@ }; }; + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <200000>; + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <200000>; + }; + }; + firmware { scm { compatible = "qcom,scm-ipq5018", "qcom,scm"; @@ -82,6 +104,24 @@ #size-cells = <2>; ranges; + bootloader@4a800000 { + reg = <0x0 0x4a800000 0x0 0x200000>; + no-map; + }; + + sbl@4aa00000 { + reg = <0x0 0x4aa00000 0x0 0x100000>; + no-map; + }; + + smem@4ab00000 { + compatible = "qcom,smem"; + reg = <0x0 0x4ab00000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + }; + tz_region: tz@4ac00000 { reg = <0x0 0x4ac00000 0x0 0x200000>; no-map; @@ -94,6 +134,19 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + usbphy0: phy@5b000 { + compatible = "qcom,ipq5018-usb-hsphy"; + reg = <0x0005b000 0x120>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq5018-tlmm"; reg = <0x01000000 0x300000>; @@ -129,6 +182,12 @@ #power-domain-cells = <1>; }; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + sdhc_1: mmc@7804000 { compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5"; reg = <0x7804000 0x1000>; @@ -146,6 +205,16 @@ status = "disabled"; }; + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1d000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + blsp1_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078af000 0x200>; @@ -156,6 +225,61 @@ status = "disabled"; }; + blsp1_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + usb: usb@8af8800 { + compatible = "qcom,ipq5018-dwc3", "qcom,dwc3"; + reg = <0x08af8800 0x400>; + + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq"; + + clocks = <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "core", + "iface", + "sleep", + "mock_utmi"; + + resets = <&gcc GCC_USB0_BCR>; + + qcom,select-utmi-as-pipe-clk; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + usb_dwc: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x08a00000 0xe000>; + clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "ref"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + phy-names = "usb2-phy"; + phys = <&usbphy0>; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; reg = <0x0b000000 0x1000>, /* GICD */ @@ -189,6 +313,24 @@ clocks = <&sleep_clk>; }; + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq5018-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + #clock-cells = <1>; + clocks = <&a53pll>, <&xo_board_clk>, <&gcc GPLL0>; + clock-names = "pll", "xo", "gpll0"; + #mbox-cells = <1>; + }; + + a53pll: clock@b116000 { + compatible = "qcom,ipq5018-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board_clk>; + clock-names = "xo"; + }; + timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0b120000 0x1000>; |