diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8650-qrd.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 811 |
1 files changed, 811 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts new file mode 100644 index 000000000000..b9151c2ddf2e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -0,0 +1,811 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8650.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 8 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d_a.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8650 QRD"; + compatible = "qcom,sm8650-qrd", "qcom,sm8650"; + + aliases { + serial0 = &uart15; + serial1 = &uart14; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + pmic-glink { + compatible = "qcom,sm8650-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s1c_1p2>; + vdd-l12-supply = <&vreg_s6c_1p8>; + vdd-l15-supply = <&vreg_s6c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s1c_1p2>; + vdd-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "c"; + + vreg_s1c_1p2: smps1 { + regulator-name = "vreg_s1c_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1348000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3c_0p9: smps3 { + regulator-name = "vreg_s3c_0p9"; + regulator-min-microvolt = <976000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4c_1p2: smps4 { + regulator-name = "vreg_s4c_1p2"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1280000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5c_0p7: smps5 { + regulator-name = "vreg_s5c_0p7"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6c_1p8: smps6 { + regulator-name = "vreg_s6c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-name = "vreg_l3c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "e"; + + vreg_l3e_0p9: ldo3 { + regulator-name = "vreg_l3e_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "g"; + + vreg_l1g_0p91: ldo1 { + regulator-name = "vreg_l1g_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_0p91: ldo3 { + regulator-name = "vreg_l3g_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l2-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s4-supply = <&vph_pwr>; + + qcom,pmic-id = "i"; + + vreg_s4i_0p85: smps4 { + regulator-name = "vreg_s4i_0p85"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_0p88: ldo1 { + regulator-name = "vreg_l1i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_0p88: ldo2 { + regulator-name = "vreg_l2i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_1p2: ldo3 { + regulator-name = "vreg_l3i_0p91"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sm8650/ipa_fws.mbn"; + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3i_1p2>; + + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>; + pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>; + pinctrl-names = "default", "sleep"; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1i_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&pm8550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; + +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + power-source = <1>; + }; +}; + +&pm8550_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&pmk8550_rtc { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8650/adsp.mbn", + "qcom/sm8650/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8650/cdsp.mbn", + "qcom/sm8650/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8650/modem.mbn", + "qcom/sm8650/modem_dtb.mbn"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&spi4 { + status = "okay"; + + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <162 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>; + + avdd-supply = <&vreg_l14b_3p2>; + + spi-max-frequency = <1000000>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <2400>; + + pinctrl-0 = <&ts_irq>, <&ts_reset>; + pinctrl-names = "default"; + }; +}; + +&tlmm { + /* Reserved I/Os for NFC */ + gpio-reserved-ranges = <32 8>, <74 1>; + + bt_default: bt-default-state { + bt-en-pins { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sw-ctrl-pins { + pins = "gpio18"; + function = "gpio"; + bias-pull-down; + }; + }; + + disp0_reset_n_active: disp0-reset-n-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp0_reset_n_suspend: disp0-reset-n-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_active: mdp-vsync-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_suspend: mdp-vsync-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_irq: ts-irq-state { + pins = "gpio161"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + output-disable; + }; + + ts_reset: ts-reset-state { + pins = "gpio162"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + clocks = <&rpmhcc RPMH_RF_CLK1>; + + vddio-supply = <&vreg_l3c_1p2>; + vddaon-supply = <&vreg_l15b_1p8>; + vdddig-supply = <&vreg_s3c_0p9>; + vddrfa0p8-supply = <&vreg_s3c_0p9>; + vddrfa1p2-supply = <&vreg_s1c_1p2>; + vddrfa1p9-supply = <&vreg_s6c_1p8>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + +&uart15 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1c_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +/* + * DPAUX -> WCD9395 -> USB_SBU -> USB-C + * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C + * USB SS -> NB7VPQ904MMUTWG -> USB-C + */ + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1i_0p88>; + vdda12-supply = <&vreg_l3i_1p2>; + + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3i_1p2>; + vdda-pll-supply = <&vreg_l3g_0p91>; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; |