diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 37 |
1 files changed, 28 insertions, 9 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 4240e20d38ac..86d3da36e4f3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -15,6 +15,7 @@ / { model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL"; compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp"; + chassis-type = "embedded"; chosen { stdout-path = &uart4; @@ -55,6 +56,21 @@ clock-frequency = <25000000>; }; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + label = "X29"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon0>; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; + }; + fan0: pwm-fan { compatible = "pwm-fan"; pinctrl-names = "default"; @@ -168,6 +184,13 @@ enable-active-high; }; + reg_vcc_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + reg_vcc_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; @@ -464,7 +487,7 @@ clock-names = "mclk"; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>; reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; - iov-supply = <®_vcc_3v3>; + iov-supply = <®_vcc_1v8>; ldoin-supply = <®_vcc_3v3>; }; @@ -602,7 +625,6 @@ &usb3_1 { fsl,disable-port-power-control; fsl,permanently-attached; - dr_mode = "host"; status = "okay"; }; @@ -626,13 +648,10 @@ role-switch-default-mode = "peripheral"; status = "okay"; - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - type = "micro"; - label = "X29"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbcon0>; - id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; }; }; |