diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom/qcom-msm8660.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 217 |
1 files changed, 1 insertions, 216 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi index 78023ed2fdf7..a7c245b9c8f9 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi @@ -73,22 +73,6 @@ }; }; - /* - * These channels from the ADC are simply hardware monitors. - * That is why the ADC is referred to as "HKADC" - HouseKeeping - * ADC. - */ - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&xoadc 0x00 0x01>, /* Battery */ - <&xoadc 0x00 0x02>, /* DC in (charger) */ - <&xoadc 0x00 0x04>, /* VPH the main system voltage */ - <&xoadc 0x00 0x0b>, /* Die temperature */ - <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ - <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ - <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ - }; - soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -334,143 +318,10 @@ status = "disabled"; }; - ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pm8058: pmic { - compatible = "qcom,pm8058"; - interrupt-parent = <&tlmm>; - interrupts = <88 8>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pm8058_gpio: gpio@150 { - compatible = "qcom,pm8058-gpio", - "qcom,ssbi-gpio"; - reg = <0x150>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - gpio-ranges = <&pm8058_gpio 0 0 44>; - #gpio-cells = <2>; - - }; - - pm8058_mpps: mpps@50 { - compatible = "qcom,pm8058-mpp", - "qcom,ssbi-mpp"; - reg = <0x50>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8058_mpps 0 0 12>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pwrkey@1c { - compatible = "qcom,pm8058-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pm8058>; - interrupts = <50 1>, <51 1>; - debounce = <15625>; - pull-up; - }; - - pm8058_keypad: keypad@148 { - compatible = "qcom,pm8058-keypad"; - reg = <0x148>; - interrupt-parent = <&pm8058>; - interrupts = <74 1>, <75 1>; - debounce = <15>; - scan-delay = <32>; - row-hold = <91500>; - }; - - xoadc: xoadc@197 { - compatible = "qcom,pm8058-adc"; - reg = <0x197>; - interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; - #address-cells = <2>; - #size-cells = <0>; - #io-channel-cells = <2>; - - vcoin: adc-channel@0 { - reg = <0x00 0x00>; - }; - vbat: adc-channel@1 { - reg = <0x00 0x01>; - }; - dcin: adc-channel@2 { - reg = <0x00 0x02>; - }; - ichg: adc-channel@3 { - reg = <0x00 0x03>; - }; - vph_pwr: adc-channel@4 { - reg = <0x00 0x04>; - }; - usb_vbus: adc-channel@a { - reg = <0x00 0x0a>; - }; - die_temp: adc-channel@b { - reg = <0x00 0x0b>; - }; - ref_625mv: adc-channel@c { - reg = <0x00 0x0c>; - }; - ref_1250mv: adc-channel@d { - reg = <0x00 0x0d>; - }; - ref_325mv: adc-channel@e { - reg = <0x00 0x0e>; - }; - ref_muxoff: adc-channel@f { - reg = <0x00 0x0f>; - }; - }; - - rtc@1e8 { - compatible = "qcom,pm8058-rtc"; - reg = <0x1e8>; - interrupt-parent = <&pm8058>; - interrupts = <39 1>; - allow-set-time; - }; - - vibrator@4a { - compatible = "qcom,pm8058-vib"; - reg = <0x4a>; - }; - - pm8058_led48: led@48 { - compatible = "qcom,pm8058-keypad-led"; - reg = <0x48>; - status = "disabled"; - }; - - pm8058_led131: led@131 { - compatible = "qcom,pm8058-led"; - reg = <0x131>; - status = "disabled"; - }; - - pm8058_led132: led@132 { - compatible = "qcom,pm8058-led"; - reg = <0x132>; - status = "disabled"; - }; - - pm8058_led133: led@133 { - compatible = "qcom,pm8058-led"; - reg = <0x133>; - status = "disabled"; - }; - - }; }; l2cc: clock-controller@2082000 { @@ -496,72 +347,6 @@ clocks = <&pxo_board>; clock-names = "pxo"; }; - - regulators-0 { - compatible = "qcom,rpm-pm8901-regulators"; - - pm8901_l0: l0 {}; - pm8901_l1: l1 {}; - pm8901_l2: l2 {}; - pm8901_l3: l3 {}; - pm8901_l4: l4 {}; - pm8901_l5: l5 {}; - pm8901_l6: l6 {}; - - /* S0 and S1 Handled as SAW regulators by SPM */ - pm8901_s2: s2 {}; - pm8901_s3: s3 {}; - pm8901_s4: s4 {}; - - pm8901_lvs0: lvs0 {}; - pm8901_lvs1: lvs1 {}; - pm8901_lvs2: lvs2 {}; - pm8901_lvs3: lvs3 {}; - - pm8901_mvs: mvs {}; - }; - - regulators-1 { - compatible = "qcom,rpm-pm8058-regulators"; - - pm8058_l0: l0 {}; - pm8058_l1: l1 {}; - pm8058_l2: l2 {}; - pm8058_l3: l3 {}; - pm8058_l4: l4 {}; - pm8058_l5: l5 {}; - pm8058_l6: l6 {}; - pm8058_l7: l7 {}; - pm8058_l8: l8 {}; - pm8058_l9: l9 {}; - pm8058_l10: l10 {}; - pm8058_l11: l11 {}; - pm8058_l12: l12 {}; - pm8058_l13: l13 {}; - pm8058_l14: l14 {}; - pm8058_l15: l15 {}; - pm8058_l16: l16 {}; - pm8058_l17: l17 {}; - pm8058_l18: l18 {}; - pm8058_l19: l19 {}; - pm8058_l20: l20 {}; - pm8058_l21: l21 {}; - pm8058_l22: l22 {}; - pm8058_l23: l23 {}; - pm8058_l24: l24 {}; - pm8058_l25: l25 {}; - - pm8058_s0: s0 {}; - pm8058_s1: s1 {}; - pm8058_s2: s2 {}; - pm8058_s3: s3 {}; - pm8058_s4: s4 {}; - - pm8058_lvs0: lvs0 {}; - pm8058_lvs1: lvs1 {}; - - pm8058_ncp: ncp {}; - }; }; amba { |