| Age | Commit message (Collapse) | Author |
|---|
|
Where recipes use S = ${WORKDIR}, ensure they are referencing ${S} correctly
to access files as soon we want to stop doing this in WORKDIR at which point
they would break unless corrected.
(From OE-Core rev: f25dd633fffe6560f191526d1869e657e129bad9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We've been removing PR values from recipes at upgrade time for a while. In general
anyone maintaining a binary distro would end up having to curate these themselves
so the values in OE-Core aren't really that useful anymore. In many ways it makes
sense to clear out the remaining ones (which are mostly for 'config' recipes that
are unlikely to increase in PV) and leave a clean slate for anyone implementing
a binary distro config.
References are left in meta-selftest since the tests there do involve them and
their removal upon upgrade.
(From OE-Core rev: d4c346e8ab8f3cae25d1b01c7331ed9f6d4f96ef)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is the result of automated script conversion:
scripts/contrib/convert-overrides.py <oe-core directory>
converting the metadata to use ":" as the override character instead of "_".
(From OE-Core rev: 42344347be29f0997cc2f7636d9603b1fe1875ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The busybox-syslog rrecomends is proving tricky as it gets pulled in early and
there are conflicts between its use of update-alternatives and busybox needing
to provide those things.
We already have recipes using BAD_RRECOMMENDS to remove this dependency, it probably
makes sense to spell it out explicitly and allow it to be overridden more easily.
This patch does this, dropping the now unneeded BAD_RRECOMMENDS. It preserves
the dependency as a recommendation for now, further cleanup may allow simplication
of that.
This unbreaks certain build failures on the autobuilder, more as a workaround but
is a change we probably want to make anyway.
(From OE-Core rev: 544ade2d78f1375d9e93d6bf5842d857ddaf3530)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With multi kernel support in the installer we can exceed this limit.
Calculate a sane size by checking the size of the original boot
partition minus some objects we know won't be installed, plus some extra
space for users.
In addition, in the common case where only one small kernel is present
to be installed, we actually get a smaller boot partition with less
wasted space.
Also add VIRTUAL-RUNTIME_base-utils to RDEPENDS where these scripts are
used, as they're needed for the du command.
[YOCTO #12583].
(From OE-Core rev: 2ca601bef44a07512c93b8452cf9001dce402617)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
So that we can use this on aarch64 with HiKey board.
(From OE-Core rev: d78a3cd2a76b381b0395d99201f670c94fb594c7)
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added util-linux-blkid to the list of dependencies of
initramfs-live-install and initramfs-live-install-efi.
This is a part of the work to support partiion UUID in installer.
blkid is going to be used to get partition and filesystem UUIDs.
(From OE-Core rev: 3c26a5ad5937556dfd3262fa50e63350c5c71623)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After removal of auto-creating S we must ensure that all recipes are
using a proper value for S.
Fix all recipes that only need to set S equals to WORKDIR.
[YOCTO #5627]
(From OE-Core rev: 9d220b1bfe4589736604dd5a7129e3699377d830)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
(From OE-Core rev: b8feee3cf21f70ba4ec3b822d2f596d4fc02a292)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The install boot option was giving the following error when one tried to
install the live image on a permanent storage of a BSP.
cat: write error Invalid argument
Installation image failed
sh: can't access tty: job control turned off
Further digging into the issue, found out that the install script was trying
to do this:
cat /proc/mounts > /etc/mtab
And in the base-files recipe the /etc/mtab is made soft link to /proc/mounts.
So the cat command was failing to write on /etc/mtab. As the contents of
the /proc/mounts is already reflected in the /etc/mtab file due to the
symlink-ing, there is no need for this step to recreate /etc/mtab in the
install script. So just removing this unnecessary step, which solves the
install issue of the live images.
Fixes this bug:
[YOCTO #4229]
(From OE-Core rev: f8663eac872882e94d956b1b604304e92b865766)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #3870] atom-pc - cannot boot image on netbook after install
The problem here is that grub2 is installed but a grub 1 menu.lst is
created at install time. At boot, grub2 doesn't find a grub.cfg file and
drops to the grub shell.
This happens because the installer is looking for 40_custom (a grub2
file) on the rootfs, but grub2 isn't installed on the rootfs. It exists
in the initramfs. Patching the installer to look on the initramfs
resolves the problem.
Note that the problem may have occurred if grub2 used to be installed on
the rootfs but was later removed. In any case, the installer is HORRIBLE
and really needs to be completely redesigned as part of the deployment
effort. For now, this should get the live image installer limping along
again.
Tested on a Toshiba NB-305.
(From OE-Core rev: 8756a19bd24045d41ad20abb581e7872d0fc9ee6)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: alexandru.c.georgescu@intel.com
Cc: sgw@linux.intel.com
Cc: ross.burton@intel.com
Cc: richard.purdie@intel.com
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2385]
The installer only searches for hd[ab] sd[ab]. Some newer BSPs have mmcblk
devices that should be used as the install target. These devices also have a
partition prefix (mmcblk0p1 instead of mmcblk01). As they are detected
asynchronously, it is necessary to add the rootwait kernel parameter to avoid
a race condition trying to mount the root device.
As BSPs like the FRI2 and the sys940x have mmc devices and will have a 1.2
release, we should push this to 1.2.1. The changes are perfectly contained and
easily verified.
Test for an mmcblk device and add the p partition prefix if necessary. Add the
rootwait kernel parameter when an mmcblk device is detected. Replace the series
of explicit umount commands with a single umount using a wildcard. This will
find all the partitions and will not try to unmount non-existant devices. Avoid
copy and paste errors by replacing /dev/${device}${pX} references with the
previously assigned rootfs, bootfs, and swap variables.
These changes have been tested on the FRI2 Sato image which installed to
/dev/mmcblk0 as well as the N450 Sato image which installed to /dev/sda. Both
were successful.
(From OE-Core rev: bf403680d72e360c7382f540ea25cfdcbe77b4e5)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we don't set PATH, then the shell will specify one for us.
Busybox adds the sbin dirs, but bash does not. I hit an
issue where bash (among other things) ended up in my initrd
and the boot scripts failed due to a bad default PATH. While
that is a separate issue, we should not be at the mercy of the
shell's default PATH. Update the initrdscripts to all specify:
PATH=/sbin:/bin:/usr/sbin:/usr/bin
(From OE-Core rev: 4617ae0f433876037c2c9a0dfdb5e373e7a5c77b)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
RDEPENDS is package-specific, so add ${PN} to it.
(From OE-Core rev: ac3373f5baefd5ac5fea7d7f68690bf0f0889be6)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
grub2 needs a different set of install steps from grub 0.97. This
adds them to init-install.sh and adds an install-time check that
determines which version is being used and which steps to use
depending on the version of grub selected.
(From OE-Core rev: c67d03eb3684acab89e5972609e397087727e74e)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #1428]
Because the underlying grub 0.97 the initramfs-live-install RDEPDNEDS on
only supports 32bit x86 target, set the COMPATIBLE_HOST accordingly.
(From OE-Core rev: d128b4f2746ee8525352ce982a9c2a5e422630f2)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
configuration file
|
|
initramfs-live-install is only compatible with i.86|x86_64 so
shouldn't inherit 'allarch'. This comments it out.
More specifically, commit 52295fa3deef3b0374b99829626d524cefae6001
(Improve handling of 'all' architecture recipes and their interaction
with sstate) sets TARGET_ARCH which due to the COMPATIBLE_HOST setting
in the recipe causes it to be skipped and gives the following error
for any -live build:
NOTE: Resolving any missing task queue dependencies
NOTE: Runtime target 'initramfs-live-install' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['initramfs-live-install']
ERROR: Required build target 'core-image-sato-live' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-sato-live', 'core-ima\
ge-minimal-initramfs', 'initramfs-live-install']
ERROR: Nothing RPROVIDES 'initramfs-live-install'
(From OE-Core rev: e576e4aa91fc1608f706a341088f9a7b9a21cd2a)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Commented out with explaination instead of remove
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The existing PACKAGE_ARCH = "all" mechanism of sharing packages is problematic
with sstate since there are a variety of variables which have target specific
values and the sstate package therefore correctly changes signature depending
on the MACHINE setting.
This patch creates a new "allarch" class which sets:
PACKAGE_ARCH = "all"
(as per the existing convention)
INHIBIT_DEFAULT_DEPS = "1"
(since its not target specific and therefore can't depend on the cross
compiler or target libc)
TARGET_ARCH = "all"
TARGET_OS = "linux"
TARGET_CC_ARCH = "none"
(since these variables shouldn't change between the different packages and
target compiler flags shouldn't be getting used)
PACKAGE_EXTRA_ARCHS = ""
(since we shouldn't be depending on any architecture specific package architectures)
Not all PACKAGE_ARCH = "all" recipes can use this class since some run configure
checks on the compiler. This means they have target specific components and therefore
the "all" classification is incorrect.
(From OE-Core rev: 26e5e5feb695864b11e47e24017e254c28f14494)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 607a7657715f6fcba467a4e55ba64f41f4e13a15)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
An investigation into undocumented variables uncovered a few mispellings
of the variable DESCRIPTION.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Add COPYING.MIT file checksum to bb file
Signed-off-by: Mei Lei <lei.mei@intel.com>
|
|
Having one monolithic packages directory makes it hard to find things
and is generally overwhelming. This commit splits it into several
logical sections roughly based on function, recipes.txt gives more
information about the classifications used.
The opportunity is also used to switch from "packages" to "recipes"
as used in OpenEmbedded as the term "packages" can be confusing to
people and has many different meanings.
Not all recipes have been classified yet, this is just a first pass
at separating things out. Some packages are moved to meta-extras as
they're no longer actively used or maintained.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
Richard Purdie
California Sullivan
Peter Griffin
Ed Bartosh
Petter Mabäcker
Paul Eggleton
Nitin A Kamble
Darren Hart
Tom Zanussi
Lianhao Lu
Mei Lei
Richard Purdie