diff options
Diffstat (limited to 'documentation/overview-manual/concepts.rst')
| -rw-r--r-- | documentation/overview-manual/concepts.rst | 593 |
1 files changed, 362 insertions, 231 deletions
diff --git a/documentation/overview-manual/concepts.rst b/documentation/overview-manual/concepts.rst index 5698d93759..62f2327a7e 100644 --- a/documentation/overview-manual/concepts.rst +++ b/documentation/overview-manual/concepts.rst @@ -34,10 +34,10 @@ itself is of various types: BitBake knows how to combine multiple data sources together and refers to each data source as a layer. For information on layers, see the -":ref:`dev-manual/common-tasks:understanding and creating layers`" +":ref:`dev-manual/layers:understanding and creating layers`" section of the Yocto Project Development Tasks Manual. -Following are some brief details on these core components. For +Here are some brief details on these core components. For additional information on how these components interact during a build, see the ":ref:`overview-manual/concepts:openembedded build system concepts`" @@ -69,12 +69,10 @@ type the following:: $ bitbake matchbox-desktop -Several different -versions of ``matchbox-desktop`` might exist. BitBake chooses the one -selected by the distribution configuration. You can get more details -about how BitBake chooses between different target versions and -providers in the -":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-execution:preferences`" section +Several different versions of ``matchbox-desktop`` might exist. BitBake chooses +the one selected by the distribution configuration. You can get more details +about how BitBake chooses between different target versions and providers in the +":ref:`bitbake-user-manual/bitbake-user-manual-execution:preferences`" section of the BitBake User Manual. BitBake also tries to execute any dependent tasks first. So for example, @@ -107,12 +105,11 @@ Classes ------- Class files (``.bbclass``) contain information that is useful to share -between recipes files. An example is the -:ref:`autotools <ref-classes-autotools>` class, -which contains common settings for any application that Autotools uses. -The ":ref:`ref-manual/classes:Classes`" chapter in the -Yocto Project Reference Manual provides details about classes and how to -use them. +between recipes files. An example is the :ref:`ref-classes-autotools` class, +which contains common settings for any application that is built with +the :wikipedia:`GNU Autotools <GNU_Autotools>`. +The ":ref:`ref-manual/classes:Classes`" chapter in the Yocto Project +Reference Manual provides details about classes and how to use them. Configurations -------------- @@ -140,7 +137,7 @@ using a different layer where that metadata might be common across several pieces of hardware. There are many layers working in the Yocto Project development environment. The -:yocto_home:`Yocto Project Curated Layer Index </software-overview/layers/>` +:yocto_home:`Yocto Project Compatible Layer Index </software-overview/layers/>` and :oe_layerindex:`OpenEmbedded Layer Index <>` both contain layers from which you can use or leverage. @@ -149,7 +146,7 @@ Conforming to a known structure allows BitBake to make assumptions during builds on where to find types of metadata. You can find procedures and learn about tools (i.e. ``bitbake-layers``) for creating layers suitable for the Yocto Project in the -":ref:`dev-manual/common-tasks:understanding and creating layers`" +":ref:`dev-manual/layers:understanding and creating layers`" section of the Yocto Project Development Tasks Manual. OpenEmbedded Build System Concepts @@ -166,7 +163,7 @@ remainder of this section expands on the fundamental input, output, process, and metadata logical blocks that make up the workflow. .. image:: figures/YP-flow-diagram.png - :align: center + :width: 100% In general, the build's workflow consists of several functional areas: @@ -209,7 +206,7 @@ Configuration" box of the :ref:`general workflow figure <overview-manual/concepts:openembedded build system concepts>`: .. image:: figures/user-configuration.png - :align: center + :width: 100% BitBake needs some basic configuration files in order to complete a build. These files are ``*.conf`` files. The minimally necessary ones @@ -233,13 +230,12 @@ for creating actual configuration files when you source :ref:`structure-core-script`, which is the build environment script. -Sourcing the build environment script creates a -:term:`Build Directory` if one does not -already exist. BitBake uses the Build Directory for all its work during -builds. The Build Directory has a ``conf`` directory that contains -default versions of your ``local.conf`` and ``bblayers.conf`` +Sourcing the build environment script creates a :term:`Build Directory` +if one does not already exist. BitBake uses the :term:`Build Directory` +for all its work during builds. The Build Directory has a ``conf`` directory +that contains default versions of your ``local.conf`` and ``bblayers.conf`` configuration files. These default configuration files are created only -if versions do not already exist in the Build Directory at the time you +if versions do not already exist in the :term:`Build Directory` at the time you source the build environment setup script. Because the Poky repository is fundamentally an aggregation of existing @@ -251,9 +247,9 @@ assumes the script is executed from within a cloned or unpacked version of Poky. Depending on where the script is sourced, different sub-scripts are -called to set up the Build Directory (Yocto or OpenEmbedded). +called to set up the :term:`Build Directory` (Yocto or OpenEmbedded). Specifically, the script ``scripts/oe-setup-builddir`` inside the poky -directory sets up the Build Directory and seeds the directory (if +directory sets up the :term:`Build Directory` and seeds the directory (if necessary) with configuration files appropriate for the Yocto Project development environment. @@ -269,7 +265,7 @@ The ``local.conf`` file provides many basic variables that define a build environment. Here is a list of a few. To see the default configurations in a ``local.conf`` file created by the build environment script, see the -:yocto_git:`local.conf.sample </poky/tree/meta-poky/conf/local.conf.sample>` +:yocto_git:`local.conf.sample </poky/tree/meta-poky/conf/templates/default/local.conf.sample>` in the ``meta-poky`` layer: - *Target Machine Selection:* Controlled by the @@ -300,25 +296,20 @@ in the ``meta-poky`` layer: .. note:: - Configurations set in the - conf/local.conf - file can also be set in the - conf/site.conf - and - conf/auto.conf - configuration files. + Configurations set in the ``conf/local.conf`` file can also be set + in the ``conf/site.conf`` and ``conf/auto.conf`` configuration files. The ``bblayers.conf`` file tells BitBake what layers you want considered during the build. By default, the layers listed in this file include layers minimally needed by the build system. However, you must manually add any custom layers you have created. You can find more information on working with the ``bblayers.conf`` file in the -":ref:`dev-manual/common-tasks:enabling your layer`" +":ref:`dev-manual/layers:enabling your layer`" section in the Yocto Project Development Tasks Manual. The files ``site.conf`` and ``auto.conf`` are not created by the environment initialization script. If you want the ``site.conf`` file, -you need to create that yourself. The ``auto.conf`` file is typically +you need to create it yourself. The ``auto.conf`` file is typically created by an autobuilder: - *site.conf:* You can use the ``conf/site.conf`` configuration @@ -326,17 +317,7 @@ created by an autobuilder: you had several build environments and they shared some common features. You can set these default build properties here. A good example is perhaps the packaging format to use through the - :term:`PACKAGE_CLASSES` - variable. - - One useful scenario for using the ``conf/site.conf`` file is to - extend your :term:`BBPATH` variable - to include the path to a ``conf/site.conf``. Then, when BitBake looks - for Metadata using :term:`BBPATH`, it finds the ``conf/site.conf`` file - and applies your common configurations found in the file. To override - configurations in a particular build directory, alter the similar - configurations within that build directory's ``conf/local.conf`` - file. + :term:`PACKAGE_CLASSES` variable. - *auto.conf:* The file is usually created and written to by an autobuilder. The settings put into the file are typically the same as @@ -406,6 +387,7 @@ layers from the :ref:`general workflow figure .. image:: figures/layer-input.png :align: center + :width: 70% In general, all layers have a similar structure. They all contain a licensing file (e.g. ``COPYING.MIT``) if the layer is to be distributed, @@ -413,7 +395,7 @@ a ``README`` file as good practice and especially if the layer is to be distributed, a configuration directory, and recipe directories. You can learn about the general structure for layers used with the Yocto Project in the -":ref:`dev-manual/common-tasks:creating your own layer`" +":ref:`dev-manual/layers:creating your own layer`" section in the Yocto Project Development Tasks Manual. For a general discussion on layers and the many layers from which you can draw, see the @@ -442,7 +424,7 @@ The distribution layer provides policy configurations for your distribution. Best practices dictate that you isolate these types of configurations into their own layer. Settings you provide in ``conf/distro/distro.conf`` override similar settings that BitBake finds -in your ``conf/local.conf`` file in the Build Directory. +in your ``conf/local.conf`` file in the :term:`Build Directory`. The following list provides some explanation and references for what you typically find in the distribution layer: @@ -545,10 +527,11 @@ repositories, which is not the default behavior, and store them in the variable. Judicious use of a :term:`DL_DIR` directory can save the build system a trip -across the Internet when looking for files. A good method for using a -download directory is to have :term:`DL_DIR` point to an area outside of -your Build Directory. Doing so allows you to safely delete the Build -Directory if needed without fear of removing any downloaded source file. +across the Internet when looking for files. A good method for using a download +directory is to have :term:`DL_DIR` point to an area outside of your +:term:`Build Directory`. Doing so allows you to safely delete the +:term:`Build Directory` if needed without fear of removing any downloaded +source file. The remainder of this section provides a deeper look into the source files and the mirrors. Here is a more detailed look at the source file @@ -556,6 +539,7 @@ area of the :ref:`general workflow figure <overview-manual/concepts:openembedded .. image:: figures/source-input.png :align: center + :width: 70% Upstream Project Releases ~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -570,33 +554,30 @@ Local Projects ~~~~~~~~~~~~~~ Local projects are custom bits of software the user provides. These bits -reside somewhere local to a project - perhaps a directory into which the +reside somewhere local to a project --- perhaps a directory into which the user checks in items (e.g. a local directory containing a development source tree used by the group). -The canonical method through which to include a local project is to use -the :ref:`externalsrc <ref-classes-externalsrc>` -class to include that local project. You use either the ``local.conf`` -or a recipe's append file to override or set the recipe to point to the -local directory on your disk to pull in the whole source tree. +The canonical method through which to include a local project is to use the +:ref:`ref-classes-externalsrc` class to include that local project. You use +either the ``local.conf`` or a recipe's append file to override or set the +recipe to point to the local directory on your disk to pull in the whole +source tree. Source Control Managers (Optional) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Another place from which the build system can get source files is with -:ref:`bitbake:bitbake-user-manual/bitbake-user-manual-fetching:fetchers` employing various Source -Control Managers (SCMs) such as Git or Subversion. In such cases, a -repository is cloned or checked out. The -:ref:`ref-tasks-fetch` task inside -BitBake uses the :term:`SRC_URI` -variable and the argument's prefix to determine the correct fetcher -module. +:ref:`bitbake-user-manual/bitbake-user-manual-fetching:fetchers` employing +various Source Control Managers (SCMs) such as Git or Subversion. In such +cases, a repository is cloned or checked out. The :ref:`ref-tasks-fetch` task +inside BitBake uses the :term:`SRC_URI` variable and the argument's prefix to +determine the correct fetcher module. .. note:: For information on how to have the OpenEmbedded build system generate - tarballs for Git repositories and place them in the - DL_DIR + tarballs for Git repositories and place them in the :term:`DL_DIR` directory, see the :term:`BB_GENERATE_MIRROR_TARBALLS` variable in the Yocto Project Reference Manual. @@ -634,7 +615,7 @@ This section looks a little closer into the package feeds area used by the build system. Here is a more detailed look at the area: .. image:: figures/package-feeds.png - :align: center + :width: 100% Package feeds are an intermediary step in the build process. The OpenEmbedded build system provides classes to generate different package @@ -642,26 +623,23 @@ types, and you specify which classes to enable through the :term:`PACKAGE_CLASSES` variable. Before placing the packages into package feeds, the build process validates them with generated output quality assurance checks -through the :ref:`insane <ref-classes-insane>` -class. +through the :ref:`ref-classes-insane` class. -The package feed area resides in the Build Directory. The directory the +The package feed area resides in the :term:`Build Directory`. The directory the build system uses to temporarily store packages is determined by a combination of variables and the particular package manager in use. See the "Package Feeds" box in the illustration and note the information to the right of that area. In particular, the following defines where package files are kept: -- :term:`DEPLOY_DIR`: Defined as - ``tmp/deploy`` in the Build Directory. +- :term:`DEPLOY_DIR`: Defined as ``tmp/deploy`` in the :term:`Build Directory`. - ``DEPLOY_DIR_*``: Depending on the package manager used, the package type sub-folder. Given RPM, IPK, or DEB packaging and tarball creation, the :term:`DEPLOY_DIR_RPM`, - :term:`DEPLOY_DIR_IPK`, - :term:`DEPLOY_DIR_DEB`, or - :term:`DEPLOY_DIR_TAR`, + :term:`DEPLOY_DIR_IPK`, or + :term:`DEPLOY_DIR_DEB` variables are used, respectively. - :term:`PACKAGE_ARCH`: Defines @@ -674,9 +652,8 @@ tasks to generate packages and place them into the package holding area (e.g. ``do_package_write_ipk`` for IPK packages). See the ":ref:`ref-tasks-package_write_deb`", ":ref:`ref-tasks-package_write_ipk`", -":ref:`ref-tasks-package_write_rpm`", and -":ref:`ref-tasks-package_write_tar`" +":ref:`ref-tasks-package_write_rpm`" sections in the Yocto Project Reference Manual for additional information. As an example, consider a scenario where an IPK packaging manager is being used and there is package architecture support for both @@ -697,7 +674,7 @@ closer look at each of those areas. .. note:: Documentation for the BitBake tool is available separately. See the - BitBake User Manual + :doc:`BitBake User Manual <bitbake:index>` for reference material on BitBake. Source Fetching @@ -707,37 +684,30 @@ The first stages of building a recipe are to fetch and unpack the source code: .. image:: figures/source-fetching.png - :align: center + :width: 100% -The :ref:`ref-tasks-fetch` and -:ref:`ref-tasks-unpack` tasks fetch -the source files and unpack them into the -:term:`Build Directory`. +The :ref:`ref-tasks-fetch` and :ref:`ref-tasks-unpack` tasks fetch +the source files and unpack them into the :term:`Build Directory`. .. note:: - For every local file (e.g. - file:// - ) that is part of a recipe's - SRC_URI - statement, the OpenEmbedded build system takes a checksum of the file - for the recipe and inserts the checksum into the signature for the - do_fetch - task. If any local file has been modified, the - do_fetch - task and all tasks that depend on it are re-executed. - -By default, everything is accomplished in the Build Directory, which has -a defined structure. For additional general information on the Build -Directory, see the ":ref:`structure-core-build`" section in + For every local file (e.g. ``file://``) that is part of a recipe's + :term:`SRC_URI` statement, the OpenEmbedded build system takes a + checksum of the file for the recipe and inserts the checksum into + the signature for the :ref:`ref-tasks-fetch` task. If any local + file has been modified, the :ref:`ref-tasks-fetch` task and all + tasks that depend on it are re-executed. + +By default, everything is accomplished in the :term:`Build Directory`, which has +a defined structure. For additional general information on the +:term:`Build Directory`, see the ":ref:`structure-core-build`" section in the Yocto Project Reference Manual. -Each recipe has an area in the Build Directory where the unpacked source -code resides. The :term:`S` variable points -to this area for a recipe's unpacked source code. The name of that -directory for any given recipe is defined from several different -variables. The preceding figure and the following list describe the -Build Directory's hierarchy: +Each recipe has an area in the :term:`Build Directory` where the unpacked +source code resides. The :term:`S` variable points to this area for a recipe's +unpacked source code. The name of that directory for any given recipe is +defined from several different variables. The preceding figure and the +following list describe the :term:`Build Directory`'s hierarchy: - :term:`TMPDIR`: The base directory where the OpenEmbedded build system performs all its work during the @@ -795,7 +765,7 @@ Once source code is fetched and unpacked, BitBake locates patch files and applies them to the source files: .. image:: figures/patching.png - :align: center + :width: 100% The :ref:`ref-tasks-patch` task uses a recipe's :term:`SRC_URI` statements @@ -819,7 +789,7 @@ For more information on how the source directories are created, see the ":ref:`overview-manual/concepts:source fetching`" section. For more information on how to create patches and how the build system processes patches, see the -":ref:`dev-manual/common-tasks:patching code`" +":ref:`dev-manual/new-recipe:patching code`" section in the Yocto Project Development Tasks Manual. You can also see the ":ref:`sdk-manual/extensible:use \`\`devtool modify\`\` to modify the source of an existing component`" @@ -836,7 +806,7 @@ compile the source code. Once compilation occurs, the files are copied to a holding area (staged) in preparation for packaging: .. image:: figures/configuration-compile-autoreconf.png - :align: center + :width: 100% This step in the build process consists of the following tasks: @@ -862,15 +832,13 @@ This step in the build process consists of the following tasks: are specific to configurations for the source code being built by the recipe. - If you are using the - :ref:`autotools <ref-classes-autotools>` class, + If you are using the :ref:`ref-classes-autotools` class, you can add additional configuration options by using the :term:`EXTRA_OECONF` or :term:`PACKAGECONFIG_CONFARGS` variables. For information on how this variable works within that - class, see the - :ref:`autotools <ref-classes-autotools>` class - :yocto_git:`here </poky/tree/meta/classes/autotools.bbclass>`. + class, see the :ref:`ref-classes-autotools` class + :yocto_git:`here </poky/tree/meta/classes-recipe/autotools.bbclass>`. - *do_compile*: Once a configuration task has been satisfied, BitBake compiles the source using the @@ -894,7 +862,7 @@ After source code is configured, compiled, and staged, the build system analyzes the results and splits the output into packages: .. image:: figures/analysis-for-package-splitting.png - :align: center + :width: 100% The :ref:`ref-tasks-package` and :ref:`ref-tasks-packagedata` @@ -905,7 +873,7 @@ following as well as other items: splitting out debugging symbols, looking at shared library dependencies between packages, and looking at package relationships. -The ``do_packagedata`` task creates package metadata based on the +The :ref:`ref-tasks-packagedata` task creates package metadata based on the analysis such that the build system can generate the final packages. The :ref:`ref-tasks-populate_sysroot` task stages (copies) a subset of the files installed by the @@ -918,7 +886,7 @@ the analysis and package splitting process use several areas: individual packages. - :term:`PKGDESTWORK`: A - temporary work area (i.e. ``pkgdata``) used by the ``do_package`` + temporary work area (i.e. ``pkgdata``) used by the :ref:`ref-tasks-package` task to save package metadata. - :term:`PKGDEST`: The parent @@ -942,13 +910,13 @@ the analysis and package splitting process use several areas: - :term:`STAGING_DIR_TARGET`: The path for the sysroot used when a component that is built to execute on a system and it generates code for yet another machine - (e.g. cross-canadian recipes). + (e.g. :ref:`ref-classes-cross-canadian` recipes). The :term:`FILES` variable defines the files that go into each package in :term:`PACKAGES`. If you want details on how this is accomplished, you can look at -:yocto_git:`package.bbclass </poky/tree/meta/classes/package.bbclass>`. +:yocto_git:`package.bbclass </poky/tree/meta/classes-global/package.bbclass>`. Depending on the type of packages being created (RPM, DEB, or IPK), the :ref:`do_package_write_* <ref-tasks-package_write_deb>` @@ -973,7 +941,7 @@ Once packages are split and stored in the Package Feeds area, the build system uses BitBake to generate the root filesystem image: .. image:: figures/image-generation.png - :align: center + :width: 100% The image generation process consists of several stages and depends on several tasks and variables. The @@ -1019,29 +987,25 @@ data files are deleted from the root filesystem. As part of the final stage of package installation, post installation scripts that are part of the packages are run. Any scripts that fail to run on the build host are run on the target when the target system is first booted. If you are -using a -:ref:`read-only root filesystem <dev-manual/common-tasks:creating a read-only root filesystem>`, +using a +:ref:`read-only root filesystem <dev-manual/read-only-rootfs:creating a read-only root filesystem>`, all the post installation scripts must succeed on the build host during the package installation phase since the root filesystem on the target is read-only. -The final stages of the ``do_rootfs`` task handle post processing. Post +The final stages of the :ref:`ref-tasks-rootfs` task handle post processing. Post processing includes creation of a manifest file and optimizations. -The manifest file (``.manifest``) resides in the same directory as the -root filesystem image. This file lists out, line-by-line, the installed -packages. The manifest file is useful for the -:ref:`testimage <ref-classes-testimage*>` class, +The manifest file (``.manifest``) resides in the same directory as the root +filesystem image. This file lists out, line-by-line, the installed packages. +The manifest file is useful for the :ref:`ref-classes-testimage` class, for example, to determine whether or not to run specific tests. See the -:term:`IMAGE_MANIFEST` -variable for additional information. +:term:`IMAGE_MANIFEST` variable for additional information. -Optimizing processes that are run across the image include ``mklibs``, -``prelink``, and any other post-processing commands as defined by the +Optimizing processes that are run across the image include ``mklibs`` +and any other post-processing commands as defined by the :term:`ROOTFS_POSTPROCESS_COMMAND` -variable. The ``mklibs`` process optimizes the size of the libraries, -while the ``prelink`` process optimizes the dynamic linking of shared -libraries to reduce start up time of executables. +variable. The ``mklibs`` process optimizes the size of the libraries. After the root filesystem is built, processing begins on the image through the :ref:`ref-tasks-image` @@ -1051,7 +1015,7 @@ the variable. This variable specifies a list of functions to call before the build system creates the final image output files. -The build system dynamically creates ``do_image_*`` tasks as needed, +The build system dynamically creates :ref:`do_image_* <ref-tasks-image>` tasks as needed, based on the image types specified in the :term:`IMAGE_FSTYPES` variable. The process turns everything into an image file or a set of image files @@ -1093,14 +1057,14 @@ Development Kit (SDK) installer scripts for both the standard SDK and the extensible SDK (eSDK): .. image:: figures/sdk-generation.png - :align: center + :width: 100% .. note:: For more information on the cross-development toolchain generation, see the ":ref:`overview-manual/concepts:cross-development toolchain generation`" section. For information on advantages gained when building a - cross-development toolchain using the do_populate_sdk task, see the + cross-development toolchain using the :ref:`ref-tasks-populate_sdk` task, see the ":ref:`sdk-manual/appendix-obtain:building an sdk installer`" section in the Yocto Project Application Development and the Extensible Software Development Kit (eSDK) manual. @@ -1115,13 +1079,13 @@ actually install. For information on the variables listed in the figure, see the ":ref:`overview-manual/concepts:application development sdk`" section. -The ``do_populate_sdk`` task helps create the standard SDK and handles +The :ref:`ref-tasks-populate_sdk` task helps create the standard SDK and handles two parts: a target part and a host part. The target part is the part built for the target hardware and includes libraries and headers. The host part is the part of the SDK that runs on the :term:`SDKMACHINE`. -The ``do_populate_sdk_ext`` task helps create the extensible SDK and +The :ref:`ref-tasks-populate_sdk_ext` task helps create the extensible SDK and handles host and target parts differently than its counter part does for the standard SDK. For the extensible SDK, the task encapsulates the build system, which includes everything needed (host and target) for the @@ -1145,8 +1109,7 @@ checksum <overview-manual/concepts:checksums (signatures)>`. .. note:: - This naming scheme assumes that - BB_SIGNATURE_HANDLER + This naming scheme assumes that :term:`BB_SIGNATURE_HANDLER` is "OEBasicHash", which is almost always the case in current OpenEmbedded. @@ -1176,12 +1139,12 @@ Since :term:`STAMPS_DIR` is usually a subdirectory of :term:`TMPDIR`, removing properly be rerun to repopulate :term:`TMPDIR`. If you want some task to always be considered "out of date", you can -mark it with the :ref:`nostamp <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:variable flags>` +mark it with the :ref:`nostamp <bitbake-user-manual/bitbake-user-manual-metadata:variable flags>` varflag. If some other task depends on such a task, then that task will also always be considered out of date, which might not be what you want. For details on how to view information about a task's signature, see the -":ref:`dev-manual/common-tasks:viewing task variable dependencies`" +":ref:`dev-manual/debugging:viewing task variable dependencies`" section in the Yocto Project Development Tasks Manual. Setscene Tasks and Shared State @@ -1213,7 +1176,7 @@ the work involved would be equal to or greater than the underlying task. In the build system, the common tasks that have setscene variants are :ref:`ref-tasks-package`, -``do_package_write_*``, +:ref:`do_package_write_* <ref-tasks-package_write_deb>`, :ref:`ref-tasks-deploy`, :ref:`ref-tasks-packagedata`, and :ref:`ref-tasks-populate_sysroot`. @@ -1223,15 +1186,15 @@ end result. The build system has knowledge of the relationship between these tasks and other preceding tasks. For example, if BitBake runs ``do_populate_sysroot_setscene`` for something, it does not make sense -to run any of the ``do_fetch``, ``do_unpack``, ``do_patch``, -``do_configure``, ``do_compile``, and ``do_install`` tasks. However, if -``do_package`` needs to be run, BitBake needs to run those other tasks. +to run any of the :ref:`ref-tasks-fetch`, :ref:`ref-tasks-unpack`, :ref:`ref-tasks-patch`, +:ref:`ref-tasks-configure`, :ref:`ref-tasks-compile`, and :ref:`ref-tasks-install` tasks. However, if +:ref:`ref-tasks-package` needs to be run, BitBake needs to run those other tasks. It becomes more complicated if everything can come from an sstate cache because some objects are simply not required at all. For example, you do not need a compiler or native tools, such as quilt, if there isn't anything -to compile or patch. If the ``do_package_write_*`` packages are available -from sstate, BitBake does not need the ``do_package`` task data. +to compile or patch. If the :ref:`do_package_write_* <ref-tasks-package_write_deb>` packages are available +from sstate, BitBake does not need the :ref:`ref-tasks-package` task data. To handle all these complexities, BitBake runs in two phases. The first is the "setscene" stage. During this stage, BitBake first checks the @@ -1269,6 +1232,7 @@ this output: .. image:: figures/images.png :align: center + :width: 75% .. note:: @@ -1276,15 +1240,12 @@ this output: ":doc:`/ref-manual/images`" chapter in the Yocto Project Reference Manual. -The build process writes images out to the :term:`Build Directory` -inside the -``tmp/deploy/images/machine/`` folder as shown in the figure. This +The build process writes images out to the :term:`Build Directory` inside +the ``tmp/deploy/images/machine/`` folder as shown in the figure. This folder contains any files expected to be loaded on the target device. -The :term:`DEPLOY_DIR` variable -points to the ``deploy`` directory, while the -:term:`DEPLOY_DIR_IMAGE` -variable points to the appropriate directory containing images for the -current configuration. +The :term:`DEPLOY_DIR` variable points to the ``deploy`` directory, while the +:term:`DEPLOY_DIR_IMAGE` variable points to the appropriate directory +containing images for the current configuration. - kernel-image: A kernel binary file. The :term:`KERNEL_IMAGETYPE` @@ -1328,7 +1289,7 @@ SDK (e.g. ``bitbake -c populate_sdk_ext`` imagename) or a standard SDK closer look at this output: .. image:: figures/sdk.png - :align: center + :width: 100% The specific form of this output is a set of files that includes a self-extracting SDK installer (``*.sh``), host and target manifest @@ -1358,10 +1319,9 @@ can initialize the environment before using the tools. the :doc:`/sdk-manual/index` manual. All the output files for an SDK are written to the ``deploy/sdk`` folder -inside the :term:`Build Directory` as -shown in the previous figure. Depending on the type of SDK, there are -several variables to configure these files. Here are the variables -associated with an extensible SDK: +inside the :term:`Build Directory` as shown in the previous figure. Depending +on the type of SDK, there are several variables to configure these files. +The variables associated with an extensible SDK are: - :term:`DEPLOY_DIR`: Points to the ``deploy`` directory. @@ -1379,15 +1339,15 @@ associated with an extensible SDK: Specifies whether or not the toolchain is included when building the extensible SDK. -- :term:`SDK_LOCAL_CONF_WHITELIST`: +- :term:`ESDK_LOCALCONF_ALLOW`: A list of variables allowed through from the build system configuration into the extensible SDK configuration. -- :term:`SDK_LOCAL_CONF_BLACKLIST`: +- :term:`ESDK_LOCALCONF_REMOVE`: A list of variables not allowed through from the build system configuration into the extensible SDK configuration. -- :term:`SDK_INHERIT_BLACKLIST`: +- :term:`ESDK_CLASS_INHERIT_DISABLE`: A list of classes to remove from the :term:`INHERIT` value globally within the extensible SDK configuration. @@ -1415,7 +1375,7 @@ This next list, shows the variables associated with a standard SDK: Lists packages that make up the target part of the SDK (i.e. the part built for the target hardware). -- :term:`SDKPATH`: Defines the +- :term:`SDKPATHINSTALL`: Defines the default SDK installation path offered by the installation script. - :term:`SDK_HOST_MANIFEST`: @@ -1446,10 +1406,10 @@ The following figure shows a high-level build environment regarding toolchain construction and use. .. image:: figures/cross-development-toolchains.png - :align: center + :width: 100% Most of the work occurs on the Build Host. This is the machine used to -build images and generally work within the the Yocto Project +build images and generally work within the Yocto Project environment. When you run :term:`BitBake` to create an image, the OpenEmbedded build system uses the host ``gcc`` compiler to bootstrap a @@ -1500,12 +1460,11 @@ relocatable SDK used to develop applications. When you run the installer, it installs the toolchain, which contains the development tools (e.g., ``gcc-cross-canadian``, ``binutils-cross-canadian``, and other ``nativesdk-*`` tools), which are tools native to the SDK (i.e. -native to :term:`SDK_ARCH`), you -need to cross-compile and test your software. The figure shows the -commands you use to easily build out this toolchain. This -cross-development toolchain is built to execute on the -:term:`SDKMACHINE`, which might or -might not be the same machine as the Build Host. +native to :term:`SDK_ARCH`), you need to cross-compile and test your +software. The figure shows the commands you use to easily build out +this toolchain. This cross-development toolchain is built to execute on the +:term:`SDKMACHINE`, which might or might not be the same machine as +the Build Host. .. note:: @@ -1610,15 +1569,15 @@ them if they are deemed to be valid. the shared state packages. Consequently, there are considerations that affect maintaining shared state feeds. For information on how the build system works with packages and can track incrementing :term:`PR` - information, see the ":ref:`dev-manual/common-tasks:automatically incrementing a package version number`" + information, see the ":ref:`dev-manual/packages:automatically incrementing a package version number`" section in the Yocto Project Development Tasks Manual. - The code in the build system that supports incremental builds is complex. For techniques that help you work around issues related to shared state code, see the - ":ref:`dev-manual/common-tasks:viewing metadata used to create the input signature of a shared state task`" + ":ref:`dev-manual/debugging:viewing metadata used to create the input signature of a shared state task`" and - ":ref:`dev-manual/common-tasks:invalidating shared state to force a task to run`" + ":ref:`dev-manual/debugging:invalidating shared state to force a task to run`" sections both in the Yocto Project Development Tasks Manual. The rest of this section goes into detail about the overall incremental @@ -1655,7 +1614,7 @@ you a good idea of when the task's data changes. To complicate the problem, there are things that should not be included in the checksum. First, there is the actual specific build path of a -given task - the :term:`WORKDIR`. It +given task --- the :term:`WORKDIR`. It does not matter if the work directory changes because it should not affect the output for target packages. Also, the build process has the objective of making native or cross packages relocatable. @@ -1714,7 +1673,7 @@ need to fix this situation. Thus far, this section has limited discussion to the direct inputs into a task. Information based on direct inputs is referred to as the "basehash" in the code. However, the question of a task's indirect -inputs still exits - items already built and present in the +inputs still exits --- items already built and present in the :term:`Build Directory`. The checksum (or signature) for a particular task needs to add the hashes of all the tasks on which the particular task depends. Choosing which dependencies @@ -1729,7 +1688,7 @@ it construct the basehash. The following statement effectively results in a list of global variable dependency excludes (i.e. variables never included in any checksum):: - BB_HASHBASE_WHITELIST ?= "TMPDIR FILE PATH PWD BB_TASKHASH BBPATH DL_DIR \\ + BB_BASEHASH_IGNORE_VARS ?= "TMPDIR FILE PATH PWD BB_TASKHASH BBPATH DL_DIR \\ SSTATE_DIR THISDIR FILESEXTRAPATHS FILE_DIRNAME HOME LOGNAME SHELL TERM \\ USER FILESPATH STAGING_DIR_HOST STAGING_DIR_TARGET COREBASE PRSERV_HOST \\ PRSERV_DUMPDIR PRSERV_DUMPFILE PRSERV_LOCKDOWN PARALLEL_MAKE \\ @@ -1780,12 +1739,11 @@ half the problem of supporting a shared state. The other half of the problem is being able to use checksum information during the build and being able to reuse or rebuild specific components. -The :ref:`sstate <ref-classes-sstate>` class is a -relatively generic implementation of how to "capture" a snapshot of a -given task. The idea is that the build process does not care about the -source of a task's output. Output could be freshly built or it could be -downloaded and unpacked from somewhere. In other words, the build -process does not need to worry about its origin. +The :ref:`ref-classes-sstate` class is a relatively generic implementation of +how to "capture" a snapshot of a given task. The idea is that the build process +does not care about the source of a task's output. Output could be freshly +built or it could be downloaded and unpacked from somewhere. In other words, +the build process does not need to worry about its origin. Two types of output exist. One type is just about creating a directory in :term:`WORKDIR`. A good example is @@ -1796,10 +1754,9 @@ type of output occurs when a set of data is merged into a shared directory tree such as the sysroot. The Yocto Project team has tried to keep the details of the -implementation hidden in the :ref:`sstate <ref-classes-sstate>` class. From a user's perspective, +implementation hidden in the :ref:`ref-classes-sstate` class. From a user's perspective, adding shared state wrapping to a task is as simple as this -:ref:`ref-tasks-deploy` example taken -from the :ref:`deploy <ref-classes-deploy>` class:: +:ref:`ref-tasks-deploy` example taken from the :ref:`ref-classes-deploy` class:: DEPLOYDIR = "${WORKDIR}/deploy-${PN}" SSTATETASKS += "do_deploy" @@ -1815,14 +1772,12 @@ from the :ref:`deploy <ref-classes-deploy>` class:: The following list explains the previous example: -- Adding "do_deploy" to ``SSTATETASKS`` adds some required - sstate-related processing, which is implemented in the - :ref:`sstate <ref-classes-sstate>` class, to - before and after the - :ref:`ref-tasks-deploy` task. +- Adding ``do_deploy`` to ``SSTATETASKS`` adds some required sstate-related + processing, which is implemented in the :ref:`ref-classes-sstate` class, to + before and after the :ref:`ref-tasks-deploy` task. - The ``do_deploy[sstate-inputdirs] = "${DEPLOYDIR}"`` declares that - ``do_deploy`` places its output in ``${DEPLOYDIR}`` when run normally + :ref:`ref-tasks-deploy` places its output in ``${DEPLOYDIR}`` when run normally (i.e. when not using the sstate cache). This output becomes the input to the shared state cache. @@ -1832,15 +1787,15 @@ The following list explains the previous example: .. note:: - If ``do_deploy`` is not already in the shared state cache or if its input + If :ref:`ref-tasks-deploy` is not already in the shared state cache or if its input checksum (signature) has changed from when the output was cached, the task runs to populate the shared state cache, after which the contents of the shared state cache is copied to ${:term:`DEPLOY_DIR_IMAGE`}. If - ``do_deploy`` is in the shared state cache and its signature indicates + :ref:`ref-tasks-deploy` is in the shared state cache and its signature indicates that the cached output is still valid (i.e. if no relevant task inputs have changed), then the contents of the shared state cache copies directly to ${:term:`DEPLOY_DIR_IMAGE`} by the ``do_deploy_setscene`` task - instead, skipping the ``do_deploy`` task. + instead, skipping the :ref:`ref-tasks-deploy` task. - The following task definition is glue logic needed to make the previous settings effective:: @@ -1850,36 +1805,33 @@ The following list explains the previous example: } addtask do_deploy_setscene - ``sstate_setscene()`` takes the flags above as input and accelerates the ``do_deploy`` task - through the shared state cache if possible. If the task was - accelerated, ``sstate_setscene()`` returns True. Otherwise, it - returns False, and the normal ``do_deploy`` task runs. For more - information, see the ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-execution:setscene`" - section in the BitBake User Manual. + ``sstate_setscene()`` takes the flags above as input and accelerates the + :ref:`ref-tasks-deploy` task through the shared state cache if possible. If + the task was accelerated, ``sstate_setscene()`` returns True. Otherwise, it + returns False, and the normal :ref:`ref-tasks-deploy` task runs. For more + information, see the ":ref:`bitbake-user-manual/bitbake-user-manual-execution:setscene`" + section in the BitBake User Manual. -- The ``do_deploy[dirs] = "${DEPLOYDIR} ${B}"`` line creates - ``${DEPLOYDIR}`` and ``${B}`` before the ``do_deploy`` task runs, and - also sets the current working directory of ``do_deploy`` to ``${B}``. - For more information, see the ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-metadata:variable flags`" - section in the BitBake - User Manual. +- The ``do_deploy[dirs] = "${DEPLOYDIR} ${B}"`` line creates ``${DEPLOYDIR}`` + and ``${B}`` before the :ref:`ref-tasks-deploy` task runs, and also sets the + current working directory of :ref:`ref-tasks-deploy` to ``${B}``. For more + information, see the ":ref:`bitbake-user-manual/bitbake-user-manual-metadata:variable flags`" + section in the BitBake User Manual. .. note:: In cases where ``sstate-inputdirs`` and ``sstate-outputdirs`` would be the same, you can use ``sstate-plaindirs``. For example, to preserve the - ${:term:`PKGD`} and ${:term:`PKGDEST`} output from the ``do_package`` + ${:term:`PKGD`} and ${:term:`PKGDEST`} output from the :ref:`ref-tasks-package` task, use the following:: do_package[sstate-plaindirs] = "${PKGD} ${PKGDEST}" -- The ``do_deploy[stamp-extra-info] = "${MACHINE_ARCH}"`` line appends - extra metadata to the :ref:`stamp - file <overview-manual/concepts:stamp files and the rerunning of tasks>`. In - this case, the metadata makes the task specific to a machine's architecture. - See - ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-execution:the task list`" +- The ``do_deploy[stamp-extra-info] = "${MACHINE_ARCH}"`` line appends extra + metadata to the :ref:`stamp file <overview-manual/concepts:stamp files and the rerunning of tasks>`. + In this case, the metadata makes the task specific to a machine's architecture. + See the ":ref:`bitbake-user-manual/bitbake-user-manual-execution:the task list`" section in the BitBake User Manual for more information on the ``stamp-extra-info`` flag. @@ -1904,7 +1856,7 @@ Behind the scenes, the shared state code works by looking in shared state files. Here is an example:: SSTATE_MIRRORS ?= "\ - file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ + file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \ file://.* file:///some/local/dir/sstate/PATH" .. note:: @@ -1989,7 +1941,7 @@ Thanks to this, the depending tasks will keep a previously recorded task hash, and BitBake will be able to retrieve their output from the Shared State cache, instead of re-executing them. Similarly, the output of further downstream tasks can also be retrieved from Shared -Shate. +State. If the output hash is unknown, a new entry will be created on the Hash Equivalence server, matching the task hash to that output. @@ -2011,6 +1963,15 @@ task output from the Shared State cache. the stability of the task's output hash. Therefore, the effectiveness of Hash Equivalence strongly depends on it. + Recipes that are not reproducible may have undesired behavior if hash + equivalence is enabled, since the non-reproducible diverging output maybe be + remapped to an older sstate object in the cache by the server. If a recipe + is non-reproducible in trivial ways, such as different timestamps, this is + likely not a problem. However recipes that have more dramatic changes (such + as completely different file names) will likely outright fail since the + downstream sstate objects are not actually equivalent to what was just + built. + This applies to multiple scenarios: - A "trivial" change to a recipe that doesn't impact its generated output, @@ -2037,7 +1998,7 @@ variables: - :term:`BB_HASHSERVE_UPSTREAM`, when ``BB_HASHSERVE = "auto"``, allowing to connect the local server to an upstream one. -- :term:`bitbake:BB_SIGNATURE_HANDLER`, which must be set to ``OEEquivHash``. +- :term:`bitbake:BB_SIGNATURE_HANDLER`, which must be set to ``OEEquivHash``. Therefore, the default configuration in Poky corresponds to the below settings:: @@ -2088,7 +2049,7 @@ dependencies, you must manually declare the dependencies. located. For each shared library, the package that contains the shared library is registered as providing the shared library. More specifically, the package is registered as providing the - `soname <https://en.wikipedia.org/wiki/Soname>`__ of the library. The + :wikipedia:`soname <Soname>` of the library. The resulting shared-library-to-package mapping is saved globally in :term:`PKGDATA_DIR` by the :ref:`ref-tasks-packagedata` @@ -2115,12 +2076,12 @@ dependencies, you must manually declare the dependencies. :term:`PRIVATE_LIBS` inside the package's recipe. -- ``pcdeps``: During the ``do_package`` task of each recipe, all +- ``pcdeps``: During the :ref:`ref-tasks-package` task of each recipe, all pkg-config modules (``*.pc`` files) installed by the recipe are located. For each module, the package that contains the module is registered as providing the module. The resulting module-to-package mapping is saved globally in :term:`PKGDATA_DIR` by the - ``do_packagedata`` task. + :ref:`ref-tasks-packagedata` task. Simultaneously, all pkg-config modules installed by the recipe are inspected to see what other pkg-config modules they depend on. A @@ -2153,7 +2114,7 @@ dependencies, you must manually declare the dependencies. By default, ``foo-dev`` also has an :term:`RDEPENDS`-style dependency on ``foo``, because the default value of ``RDEPENDS:${PN}-dev`` (set in - bitbake.conf) includes "${PN}". + ``bitbake.conf``) includes "${PN}". To ensure that the dependency chain is never broken, ``-dev`` and ``-dbg`` packages are always generated by default, even if the @@ -2161,12 +2122,12 @@ dependencies, you must manually declare the dependencies. :term:`ALLOW_EMPTY` variable for more information. -The ``do_package`` task depends on the ``do_packagedata`` task of each -recipe in :term:`DEPENDS` through use -of a ``[``\ :ref:`deptask <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:variable flags>`\ ``]`` -declaration, which guarantees that the required -shared-library/module-to-package mapping information will be available -when needed as long as :term:`DEPENDS` has been correctly set. +The :ref:`ref-tasks-package` task depends on the :ref:`ref-tasks-packagedata` +task of each recipe in :term:`DEPENDS` through use of a +``[``\ :ref:`deptask <bitbake-user-manual/bitbake-user-manual-metadata:variable flags>`\ ``]`` +declaration, which guarantees that the required shared-library / +module-to-package mapping information will be available when needed as long as +:term:`DEPENDS` has been correctly set. Fakeroot and Pseudo =================== @@ -2176,8 +2137,8 @@ operations that are normally reserved for the root user (e.g. :ref:`ref-tasks-install`, :ref:`do_package_write* <ref-tasks-package_write_deb>`, :ref:`ref-tasks-rootfs`, and -:ref:`do_image* <ref-tasks-image>`). For example, -the ``do_install`` task benefits from being able to set the UID and GID +:ref:`do_image_* <ref-tasks-image>`). For example, +the :ref:`ref-tasks-install` task benefits from being able to set the UID and GID of installed files to arbitrary values. One approach to allowing tasks to perform root-only operations would be @@ -2228,3 +2189,173 @@ For more information, see the BitBake User Manual. You can also reference the "`Why Not Fakeroot? <https://github.com/wrpseudo/pseudo/wiki/WhyNotFakeroot>`__" article for background information on Fakeroot and Pseudo. + +BitBake Tasks Map +================= + +To understand how BitBake operates in the build directory and environment +we can consider the following recipes and diagram, to have full picture +about the tasks that BitBake runs to generate the final package file +for the recipe. + +We will have two recipes as an example: + +- ``libhello``: A recipe that provides a shared library +- ``sayhello``: A recipe that uses ``libhello`` library to do its job + +.. note:: + + ``sayhello`` depends on ``libhello`` at compile time as it needs the shared + library to do the dynamic linking process. It also depends on it at runtime + as the shared library loader needs to find the library. + For more details about dependencies check :ref:`ref-varlocality-recipe-dependencies`. + +``libhello`` sources are as follows: + +- ``LICENSE``: This is the license associated with this library +- ``Makefile``: The file used by ``make`` to build the library +- ``hellolib.c``: The implementation of the library +- ``hellolib.h``: The C header of the library + +``sayhello`` sources are as follows: + +- ``LICENSE``: This is the license associated with this project +- ``Makefile``: The file used by ``make`` to build the project +- ``sayhello.c``: The source file of the project + +Before presenting the contents of each file, here are the steps +that we need to follow to accomplish what we want in the first place, +which is integrating ``sayhello`` in our root file system: + +#. Create a Git repository for each project with the corresponding files + +#. Create a recipe for each project + +#. Make sure that ``sayhello`` recipe :term:`DEPENDS` on ``libhello`` + +#. Make sure that ``sayhello`` recipe :term:`RDEPENDS` on ``libhello`` + +#. Add ``sayhello`` to :term:`IMAGE_INSTALL` to integrate it into + the root file system + +The contents of ``libhello/Makefile`` are:: + + LIB=libhello.so + + all: $(LIB) + + $(LIB): hellolib.o + $(CC) $< -Wl,-soname,$(LIB).1 -fPIC $(LDFLAGS) -shared -o $(LIB).1.0 + + %.o: %.c + $(CC) -c $< + + clean: + rm -rf *.o *.so* + +.. note:: + + When creating shared libraries, it is strongly recommended to follow the Linux + conventions and guidelines (see `this article + <https://tldp.org/HOWTO/Program-Library-HOWTO/shared-libraries.html>`__ + for some background). + +.. note:: + + When creating ``Makefile`` files, it is strongly recommended to use ``CC``, ``LDFLAGS`` + and ``CFLAGS`` as BitBake will set them as environment variables according + to your build configuration. + +The contents of ``libhello/hellolib.h`` are:: + + #ifndef HELLOLIB_H + #define HELLOLIB_H + + void Hello(); + + #endif + +The contents of ``libhello/hellolib.c`` are:: + + #include <stdio.h> + + void Hello(){ + puts("Hello from a Yocto demo \n"); + } + +The contents of ``sayhello/Makefile`` are:: + + EXEC=sayhello + LDFLAGS += -lhello + + all: $(EXEC) + + $(EXEC): sayhello.c + $(CC) $< $(LDFLAGS) $(CFLAGS) -o $(EXEC) + + clean: + rm -rf $(EXEC) *.o + +The contents of ``sayhello/sayhello.c`` are:: + + #include <hellolib.h> + + int main(){ + Hello(); + return 0; + } + +The contents of ``libhello_0.1.bb`` are:: + + SUMMARY = "Hello demo library" + DESCRIPTION = "Hello shared library used in Yocto demo" + + # NOTE: Set the License according to the LICENSE file of your project + # and then add LIC_FILES_CHKSUM accordingly + LICENSE = "CLOSED" + + # Assuming the branch is main + # Change <username> accordingly + SRC_URI = "git://github.com/<username>/libhello;branch=main;protocol=https" + + S = "${WORKDIR}/git" + + do_install(){ + install -d ${D}${includedir} + install -d ${D}${libdir} + + install hellolib.h ${D}${includedir} + oe_soinstall ${PN}.so.${PV} ${D}${libdir} + } + +The contents of ``sayhello_0.1.bb`` are:: + + SUMMARY = "SayHello demo" + DESCRIPTION = "SayHello project used in Yocto demo" + + # NOTE: Set the License according to the LICENSE file of your project + # and then add LIC_FILES_CHKSUM accordingly + LICENSE = "CLOSED" + + # Assuming the branch is main + # Change <username> accordingly + SRC_URI = "git://github.com/<username>/sayhello;branch=main;protocol=https" + + DEPENDS += "libhello" + RDEPENDS:${PN} += "libhello" + + S = "${WORKDIR}/git" + + do_install(){ + install -d ${D}/usr/bin + install -m 0700 sayhello ${D}/usr/bin + } + +After placing the recipes in a custom layer we can run ``bitbake sayhello`` +to build the recipe. + +The following diagram shows the sequences of tasks that BitBake +executes to accomplish that. + +.. image:: svg/bitbake_tasks_map.* + :width: 100% |