| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
git cherry-pick b80c6d4
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
|
|
Set layer compat to dunfell and gatesgarth
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
|
|
Also remove the default SERIAL_CONSOLE_CHECK.
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
Update XILINX_RELEASE_VERSION to v2020.1
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Update u-boot, kernel, ATF, QEMU, pmu-firmware, multimedia recipes for
2019.2 release.
The patch also upgrades gcc microblaze, newlib and libgloss versions.
Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
This include has a single line which adds the virtual/bootloader to
EXTRA_IMAGEDEPENDS. Move this append into the individual machines and
drop the include. This makes using the meta-xilinx-bsp default machine
configuration much simpler for external users as well as making the use
of a bootloader explicit on a per machine basis.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add all available dtb sources to the IMAGE_BOOT_FILES variable. For
device-tree recipe generated dtbs the files available are only known
after they files are deployed, so a wildcard pattern is used for these
files. Note that this pattern appears before the kernel device trees due
to the preference to use custom non-kernel device trees where available.
This ordering is needed so that recipes like u-boot-zynq-uenv can pick
the first device tree to select as the default.
The kernel device trees are specifically selected based on the value of
KERNEL_DEVICETREE, this avoid the duplication of kernel image type
prefixed files along side having the actual files that the kernel
builds.
Additionally remove all instances of "${MACHINE}.dtb" as they no longer
need to be specified and are incorrect due to the nesting of the files
in the `devicetree` directory.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add thud as LAYERSERIES_COMPAT
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
The minized board is supported in the v2018.07 of u-boot which is the
default provided by oe-core/meta. This includes all the configuration
provided by the patch.
Note however that neither upstream u-boot nor the patch in
meta-xilinx-contrib provided ps7 init files for this board which makes
the HAS_PLATFORM_INIT incorrect, as it will result in a boot.bin being
built which does not include ps7 init configuration and thus will not
boot correctly. As such this change also removes the boot.bin setup and
use in the machine configuration to prevent the dependency on platform
init files which are not available.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Prepend the 'devicetree' subdirectory in IMAGE_BOOT_FILES for machines
that use the device-tree recipe.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
The Minized has a wireless connectivity (WiFi / Bluetooth). This recipes
add drivers to use the murata wireless module.
Signed-off-by: Clement Laigle <clement.laigle8@gmail.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
MiniZed is a single-core Zynq 7Z007S development board
Connectivity with Murata "Type 1DX" wireless module
- Wi-Fi 802.11b/g/n
- Bluetooth 4.1 - BLE (Bluetooth Low Energy)
Memory
- 512MB DDR3L
- 128MB QSPI Flash
- 8GB eMMC
Interfaces
- Dual Pmod (16 GPIO)
- Arduino (22 GPIO)
- USB 2.0 host
Physical interface
- Two user LED (Red/Green)
- User button
- User switch
- Reset
Only a single microUSB cable is required for power, programming, JTAG
and serial terminal for debug.
This patch adds machine configuration file for MiniZed board with
required setting of board specific yocto variables needed.
- linux-xlnx is the kernel provider
- u-boot is the u-boot provider which will also generate SPL
boot.bin
Signed-off-by: Clement Laigle <clement.laigle8@gmail.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add LAYERSERIES_COMPAT for sumo release
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
As discussed previously on mailing list, we are proceeding with layer
restructuring. For rocko release we will have the following layers
meta-xilinx
->meta-xilinx-bsp (current meta-xilinx)
->meta-xilinx-contrib
In the subsequent releases we will add other layers from Xilinx
meta-xilinx
->meta-xilinx-bsp (current meta-xilinx)
->meta-petalinux
->meta-xilinx-tools
->meta-xilinx-contrib
This will provide one clone to get all the required meta layers from
Xilinx for a complete solution, and the users can blacklist any layer
which they don't want to use using bblayer.conf.
This will enables us to help our vendors/partners to add their reference
designs, board definitions etc.
Recipe changes :
* Move reference design zybo-linux-bd.bb to meta-xilinx-contrib
* Move kernel patches realted to zybo-linux-bd-zynq7 board to
meta-xilinx-contrib
* Update README
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
Mark Hatle
Sai Hari Chandana Kalluri
Manjukumar Matha
Jaewon Lee
Alejandro Enedino Hernandez Samaniego
Nathan Rossi
Clement Laigle