Age | Commit message (Collapse) | Author |
|
The ZCU104 Evaluation Kit enables designers to jumpstart designs for
embedded vision applications such as surveillance, Advanced Driver
Assisted Systems (ADAS), machine vision, Augmented Reality (AR), drones
and medical imaging. This kit features a Zynq® UltraScale+™ MPSoC EV
device with video codec and supports many common peripherals and
interfaces for embedded vision use case. The included ZU7EV device is
equipped with a quad-core ARM® Cortex™-A53 applications processor,
dual-core Cortex-R5 real-time processor, Mali™-400 MP2 graphics
processing unit, 4KP60 capable H.264/H.265 video codec, and 16nm FinFET+
programmable logic.
This patch adds machine configuration file for ZCU104 Evaluation Kit
with required setting of board specific yocto variables needed for
compilation of bootloader, kernel and device-tree.
- linux-xlnx is the kernel provider
- u-boot-xlnx is the u-boot provider which will also generate SPL
boot.bin
- hwcodec is provided by libomxil-xlnx recipe, this will pull in
additional dependencies of VCU kernel modules, control software,
firmware binaries
Depending on the application need you may want to pass the appropriate
CMA size in bootargs or set CONFIG_CMA_SIZE_MBYTES in kernel.
While using SPL flow, you may need to provide additional hack to pass
the PMU config object. This is similar to all ZU+ boards, due to gap in
SPL flow unable to load PMU config object.
Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
The ZCU106 Evaluation Kit enables designers to jumpstart designs for
video conferencing, surveillance, Advanced Driver Assisted Systems
(ADAS) and streaming and encoding applications. This kit features a
Zynq® UltraScale+™ MPSoC EV device and supports all major peripherals
and interfaces, enabling development for a wide range of applications.
The included ZU7EV device is equipped with a quad-core ARM® Cortex™-A53
applications processor, dual-core Cortex-R5 real-time processor,
Mali™-400 MP2 graphics processing unit, 4KP60 capable H.264/H.265 video
codec, and 16nm FinFET+ programmable logic.
This patch adds machine configuration file for ZCU106 Evaluation Kit
with required setting of board specific yocto variables needed for
compilation of bootloader, kernel and device-tree.
- linux-xlnx is the kernel provider
- u-boot-xlnx is the u-boot provider which will also generate SPL boot.bin
- hwcodec is provided by libomxil-xlnx recipe, this will pull in
additional dependencies of VCU kernel modules, control software,
firmware binaries
Depending on the application need you may want to pass the appropriate
CMA size in bootargs or set CONFIG_CMA_SIZE_MBYTES in kernel.
While using SPL flow, you may need to provide additional hack to pass
the PMU config object. This is similar to all ZU+ boards, due to gap in
SPL flow unable to load PMU config object.
Signed-off-by: Devarsh Thakkar <devarsht@xilinx.com>
Tested-by: Maulik Desai <maulik.desai@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Due to this change 54e2729ed43f82b8cfd96395fb68e447a9b60f86, zcu102
runqemu does not depend on u-boot-spl.bin. It requires just ATF and
u-boot to be present. Hence deploying of u-boot-spl.bin is no longer
required.
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Update kc705 bitstream for 2018.1 release
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add the wiring in u-boot-xlnx to compile kc705-microblazeel machine.
Tested-by: Jaewon Lee <jaewon.lee@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
U-Boot is now able to boot to ARM Trusted Firmware (ATF). The boot
flow is SPL(EL3) loads ATF and full u-boot and jump to ATF(EL3) which
pass control to full u-boot(EL2).
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
A race issue can be induced by do_zynq_platform_init() being fired
before do_unpack(), resulting in
| DEBUG: Executing shell function do_zynq_platform_init
| cp: cannot create regular file '.../git/board/xilinx/zynq/': No such file or directory
| WARNING: exit code 1 from a shell command.
Mitigate issue by adding dependency to completion of do_unpack task
for custom do_zynq_platform_init task. Also update comment on previous
line to match the actions on next.
Signed-off-by: Niko Mauno <niko.mauno@vaisala.com>
Reviewed-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
There are instances when SPL can be completely disabled, in such cases
do_deploy will error out complaining u-boot-spl.bin not found. This
patch fixes the issue by deploying u-boot-spl.bin only if it is present
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Update to 2018.1 pmu firmware
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Update the arm-trusted-firmware, u-boot-xlnx, linux-xlnx,
qemu-xilinx and qemu-devicetrees recipes for 2018.1 release
Tested-by: Jaewon Lee <jaewon.lee@xilinx.com>
Acked-by: Bhargava Sreekantappa Gayathri <bhargava.sreekantappa-gayathri@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Remove 2017.3 based component recipes
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add provider virtual/dtb as this recipe is involved in building dtb from
dts. We can add other recipes or conf to depend on virtual/dtb whenever
required
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add the wiring in u-boot-xlnx to compile kc705-microblazeel machine.
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add PV with Xilinx release version and u-boot version. This follows on
similar lines on how we handle kernel recipe
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add PV with Xilinx release version and ATF version. This follows on
similar lines on how we handle kernel recipe
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
This patch is required to remove circular depedency while compiling
kernel image simpleImage.mb for MB machines. We need the task to be
depedent on do_configure because kernel will depend on device-tree
to be available while compiling simpleImage.mb.
The kernel source is available in work-shared/kernel-source after
do_configure task is run, this patch changes the depedency from
do_shared_workdir to do_configure.
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
As discussed previously on mailing list, we are proceeding with layer
restructuring. For rocko release we will have the following layers
meta-xilinx
->meta-xilinx-bsp (current meta-xilinx)
->meta-xilinx-contrib
In the subsequent releases we will add other layers from Xilinx
meta-xilinx
->meta-xilinx-bsp (current meta-xilinx)
->meta-petalinux
->meta-xilinx-tools
->meta-xilinx-contrib
This will provide one clone to get all the required meta layers from
Xilinx for a complete solution, and the users can blacklist any layer
which they don't want to use using bblayer.conf.
This will enables us to help our vendors/partners to add their reference
designs, board definitions etc.
Recipe changes :
* Move reference design zybo-linux-bd.bb to meta-xilinx-contrib
* Move kernel patches realted to zybo-linux-bd-zynq7 board to
meta-xilinx-contrib
* Update README
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|