diff options
4 files changed, 971 insertions, 0 deletions
diff --git a/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0001-drm-xilinx-Add-encoder-for-Digilent-boards.patch b/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0001-drm-xilinx-Add-encoder-for-Digilent-boards.patch new file mode 100644 index 00000000..b8ba70ea --- /dev/null +++ b/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0001-drm-xilinx-Add-encoder-for-Digilent-boards.patch @@ -0,0 +1,302 @@ +From c1bf9e8c50baa237b514715dcb9c8fd367694c93 Mon Sep 17 00:00:00 2001 +From: Jason Wu <jason.wu.misc@gmail.com> +Date: Sun, 10 Apr 2016 13:14:13 +1000 +Subject: [PATCH 1/3] drm: xilinx: Add encoder for Digilent boards + +Add the dglnt_encoder driver that enables DRM support for the VGA and +HDMI output ports found on many Digilent boards. + +Upstream-Status: Pending + +Signed-off-by: Sam Bobrowicz <sbobrowicz@digilentinc.com> +Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> +--- + .../bindings/drm/xilinx/dglnt_encoder.txt | 23 +++ + drivers/gpu/drm/xilinx/Kconfig | 6 + + drivers/gpu/drm/xilinx/Makefile | 1 + + drivers/gpu/drm/xilinx/dglnt_encoder.c | 217 +++++++++++++++++++++ + 4 files changed, 247 insertions(+) + create mode 100644 Documentation/devicetree/bindings/drm/xilinx/dglnt_encoder.txt + create mode 100644 drivers/gpu/drm/xilinx/dglnt_encoder.c + +diff --git a/Documentation/devicetree/bindings/drm/xilinx/dglnt_encoder.txt b/Documentation/devicetree/bindings/drm/xilinx/dglnt_encoder.txt +new file mode 100644 +index 0000000000..242b24e482 +--- /dev/null ++++ b/Documentation/devicetree/bindings/drm/xilinx/dglnt_encoder.txt +@@ -0,0 +1,23 @@ ++Device-Tree bindings for Digilent DRM Encoder Slave ++ ++This driver provides support for VGA and HDMI outputs on Digilent FPGA boards. ++The VGA or HDMI port must be connected to a Xilinx display pipeline via an ++axi2vid IP core. ++ ++Required properties: ++ - compatible: Should be "digilent,drm-encoder". ++ ++Optional properties: ++ - dglnt,edid-i2c: The I2C device connected to the DDC bus on the video ++ connector. This is used to obtain the supported resolutions ++ of an attached monitor. If not defined, then a default ++ set of resolutions is used and the display will initialize ++ to 720p. Note most VGA connectors on Digilent boards do ++ not have the DDC bus routed out. ++ ++Example: ++ ++ encoder_0: digilent_encoder { ++ compatible = "digilent,drm-encoder"; ++ dglnt,edid-i2c = <&i2c1>; ++ }; +diff --git a/drivers/gpu/drm/xilinx/Kconfig b/drivers/gpu/drm/xilinx/Kconfig +index 12b548c2a9..c3e2562e53 100644 +--- a/drivers/gpu/drm/xilinx/Kconfig ++++ b/drivers/gpu/drm/xilinx/Kconfig +@@ -57,3 +57,9 @@ config DRM_XILINX_SDI + depends on DRM_XILINX + help + DRM driver for Xilinx Display Port Subsystem. ++ ++config DRM_DIGILENT_ENCODER ++ tristate "Digilent VGA/HDMI DRM Encoder Driver" ++ depends on DRM_XILINX ++ help ++ DRM slave encoder for Video-out on Digilent boards. +diff --git a/drivers/gpu/drm/xilinx/Makefile b/drivers/gpu/drm/xilinx/Makefile +index 19bc1541ca..c2717e40ea 100644 +--- a/drivers/gpu/drm/xilinx/Makefile ++++ b/drivers/gpu/drm/xilinx/Makefile +@@ -7,6 +7,7 @@ xilinx_drm-y := xilinx_drm_crtc.o xilinx_drm_connector.o xilinx_drm_drv.o \ + xilinx_drm_plane.o + xilinx_drm-y += xilinx_cresample.o xilinx_osd.o xilinx_rgb2yuv.o xilinx_vtc.o + ++obj-$(CONFIG_DRM_DIGILENT_ENCODER) += dglnt_encoder.o + obj-$(CONFIG_DRM_XILINX) += xilinx_drm.o + obj-$(CONFIG_DRM_XILINX_DP) += xilinx_drm_dp.o + obj-$(CONFIG_DRM_XILINX_DP_SUB) += xilinx_drm_dp_sub.o +diff --git a/drivers/gpu/drm/xilinx/dglnt_encoder.c b/drivers/gpu/drm/xilinx/dglnt_encoder.c +new file mode 100644 +index 0000000000..26a23986f9 +--- /dev/null ++++ b/drivers/gpu/drm/xilinx/dglnt_encoder.c +@@ -0,0 +1,217 @@ ++/* ++ * dglnt_encoder.c - DRM slave encoder for Video-out on Digilent boards ++ * ++ * Copyright (C) 2015 Digilent ++ * Author: Sam Bobrowicz <sbobrowicz@digilentinc.com> ++ * ++ * Based on udl_encoder.c and udl_connector.c, Copyright (C) 2012 Red Hat. ++ * Also based on xilinx_drm_dp.c, Copyright (C) 2014 Xilinx, Inc. ++ * ++ * This software is licensed under the terms of the GNU General Public ++ * License version 2, as published by the Free Software Foundation, and ++ * may be copied, distributed, and modified under those terms. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <drm/drmP.h> ++#include <drm/drm_edid.h> ++#include <drm/drm_encoder_slave.h> ++ ++#include <linux/device.h> ++#include <linux/module.h> ++#include <linux/err.h> ++#include <linux/i2c.h> ++#include <linux/of.h> ++#include <linux/of_platform.h> ++#include <linux/platform_device.h> ++ ++#define DGLNT_ENC_MAX_FREQ 150000 ++#define DGLNT_ENC_MAX_H 1920 ++#define DGLNT_ENC_MAX_V 1080 ++#define DGLNT_ENC_PREF_H 1280 ++#define DGLNT_ENC_PREF_V 720 ++ ++struct dglnt_encoder { ++ struct drm_encoder *encoder; ++ struct i2c_adapter *i2c_bus; ++ bool i2c_present; ++}; ++ ++static inline struct dglnt_encoder *to_dglnt_encoder( ++ struct drm_encoder *encoder) ++{ ++ return to_encoder_slave(encoder)->slave_priv; ++} ++ ++static bool dglnt_mode_fixup(struct drm_encoder *encoder, ++ const struct drm_display_mode *mode, ++ struct drm_display_mode *adjusted_mode) ++{ ++ return true; ++} ++ ++static void dglnt_encoder_mode_set(struct drm_encoder *encoder, ++ struct drm_display_mode *mode, ++ struct drm_display_mode *adjusted_mode) ++{ ++} ++ ++static void ++dglnt_encoder_dpms(struct drm_encoder *encoder, int mode) ++{ ++} ++ ++static void dglnt_encoder_save(struct drm_encoder *encoder) ++{ ++} ++ ++static void dglnt_encoder_restore(struct drm_encoder *encoder) ++{ ++} ++ ++static int dglnt_encoder_mode_valid(struct drm_encoder *encoder, ++ struct drm_display_mode *mode) ++{ ++ if (mode && ++ !(mode->flags & ((DRM_MODE_FLAG_INTERLACE | ++ DRM_MODE_FLAG_DBLCLK) | DRM_MODE_FLAG_3D_MASK)) && ++ (mode->clock <= DGLNT_ENC_MAX_FREQ) && ++ (mode->hdisplay <= DGLNT_ENC_MAX_H) && ++ (mode->vdisplay <= DGLNT_ENC_MAX_V)) ++ return MODE_OK; ++ return MODE_BAD; ++} ++ ++static int dglnt_encoder_get_modes(struct drm_encoder *encoder, ++ struct drm_connector *connector) ++{ ++ struct dglnt_encoder *dglnt = to_dglnt_encoder(encoder); ++ struct edid *edid; ++ int num_modes = 0; ++ ++ if (dglnt->i2c_present) { ++ edid = drm_get_edid(connector, dglnt->i2c_bus); ++ drm_mode_connector_update_edid_property(connector, edid); ++ if (edid) { ++ num_modes = drm_add_edid_modes(connector, edid); ++ kfree(edid); ++ } ++ } else { ++ num_modes = drm_add_modes_noedid(connector, DGLNT_ENC_MAX_H, ++ DGLNT_ENC_MAX_V); ++ drm_set_preferred_mode(connector, DGLNT_ENC_PREF_H, ++ DGLNT_ENC_PREF_V); ++ } ++ return num_modes; ++} ++ ++static enum drm_connector_status dglnt_encoder_detect( ++ struct drm_encoder *encoder, ++ struct drm_connector *connector) ++{ ++ struct dglnt_encoder *dglnt = to_dglnt_encoder(encoder); ++ ++ if (dglnt->i2c_present) { ++ if (drm_probe_ddc(dglnt->i2c_bus)) ++ return connector_status_connected; ++ return connector_status_disconnected; ++ } else ++ return connector_status_unknown; ++} ++ ++static struct drm_encoder_slave_funcs dglnt_encoder_slave_funcs = { ++ .dpms = dglnt_encoder_dpms, ++ .save = dglnt_encoder_save, ++ .restore = dglnt_encoder_restore, ++ .mode_fixup = dglnt_mode_fixup, ++ .mode_valid = dglnt_encoder_mode_valid, ++ .mode_set = dglnt_encoder_mode_set, ++ .detect = dglnt_encoder_detect, ++ .get_modes = dglnt_encoder_get_modes, ++}; ++ ++static int dglnt_encoder_encoder_init(struct platform_device *pdev, ++ struct drm_device *dev, ++ struct drm_encoder_slave *encoder) ++{ ++ struct dglnt_encoder *dglnt = platform_get_drvdata(pdev); ++ struct device_node *sub_node; ++ ++ encoder->slave_priv = dglnt; ++ encoder->slave_funcs = &dglnt_encoder_slave_funcs; ++ ++ dglnt->encoder = &encoder->base; ++ ++ /* get i2c adapter for edid */ ++ dglnt->i2c_present = false; ++ sub_node = of_parse_phandle(pdev->dev.of_node, "dglnt,edid-i2c", 0); ++ if (sub_node) { ++ dglnt->i2c_bus = of_find_i2c_adapter_by_node(sub_node); ++ if (!dglnt->i2c_bus) ++ DRM_INFO("failed to get the edid i2c adapter, using default modes\n"); ++ else ++ dglnt->i2c_present = true; ++ of_node_put(sub_node); ++ } ++ ++ return 0; ++} ++ ++static int dglnt_encoder_probe(struct platform_device *pdev) ++{ ++ struct dglnt_encoder *dglnt; ++ ++ dglnt = devm_kzalloc(&pdev->dev, sizeof(*dglnt), GFP_KERNEL); ++ if (!dglnt) ++ return -ENOMEM; ++ ++ platform_set_drvdata(pdev, dglnt); ++ ++ return 0; ++} ++ ++static int dglnt_encoder_remove(struct platform_device *pdev) ++{ ++ return 0; ++} ++ ++static const struct of_device_id dglnt_encoder_of_match[] = { ++ { .compatible = "digilent,drm-encoder", }, ++ { /* end of table */ }, ++}; ++MODULE_DEVICE_TABLE(of, dglnt_encoder_of_match); ++ ++static struct drm_platform_encoder_driver dglnt_encoder_driver = { ++ .platform_driver = { ++ .probe = dglnt_encoder_probe, ++ .remove = dglnt_encoder_remove, ++ .driver = { ++ .owner = THIS_MODULE, ++ .name = "dglnt-drm-enc", ++ .of_match_table = dglnt_encoder_of_match, ++ }, ++ }, ++ ++ .encoder_init = dglnt_encoder_encoder_init, ++}; ++ ++static int __init dglnt_encoder_init(void) ++{ ++ return platform_driver_register(&dglnt_encoder_driver.platform_driver); ++} ++ ++static void __exit dglnt_encoder_exit(void) ++{ ++ platform_driver_unregister(&dglnt_encoder_driver.platform_driver); ++} ++ ++module_init(dglnt_encoder_init); ++module_exit(dglnt_encoder_exit); ++ ++MODULE_AUTHOR("Digilent, Inc."); ++MODULE_DESCRIPTION("DRM slave encoder for Video-out on Digilent boards"); ++MODULE_LICENSE("GPL v2"); +-- +2.14.2 + diff --git a/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0002-clk-Add-driver-for-axi_dynclk-IP-Core.patch b/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0002-clk-Add-driver-for-axi_dynclk-IP-Core.patch new file mode 100644 index 00000000..9b6229db --- /dev/null +++ b/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0002-clk-Add-driver-for-axi_dynclk-IP-Core.patch @@ -0,0 +1,607 @@ +From 217e3b6f4393926b8dcad841381527ef3fc808c2 Mon Sep 17 00:00:00 2001 +From: Jason Wu <jason.wu.misc@gmail.com> +Date: Sun, 10 Apr 2016 13:16:06 +1000 +Subject: [PATCH 2/3] clk: Add driver for axi_dynclk IP Core + +Add support for the axi_dynclk IP Core available from Digilent. This IP +core dynamically configures the clock resources inside a Xilinx FPGA to +generate a clock with a software programmable frequency. + +Upstream-Status: Pending + +Signed-off-by: Sam Bobrowicz <sbobrowicz@digilentinc.com> +Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> +--- + drivers/clk/Kconfig | 8 + + drivers/clk/Makefile | 1 + + drivers/clk/clk-dglnt-dynclk.c | 547 +++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 556 insertions(+) + create mode 100644 drivers/clk/clk-dglnt-dynclk.c + +diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig +index dccb111100..7fe65a702b 100644 +--- a/drivers/clk/Kconfig ++++ b/drivers/clk/Kconfig +@@ -148,6 +148,14 @@ config CLK_QORIQ + This adds the clock driver support for Freescale QorIQ platforms + using common clock framework. + ++config COMMON_CLK_DGLNT_DYNCLK ++ tristate "Digilent axi_dynclk Driver" ++ depends on ARCH_ZYNQ || MICROBLAZE ++ help ++ ---help--- ++ Support for the Digilent AXI Dynamic Clock core for Xilinx ++ FPGAs. ++ + config COMMON_CLK_XGENE + bool "Clock driver for APM XGene SoC" + default y +diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile +index 0760449dde..45ce97d053 100644 +--- a/drivers/clk/Makefile ++++ b/drivers/clk/Makefile +@@ -24,6 +24,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o + obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o + obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o + obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o ++obj-$(CONFIG_COMMON_CLK_DGLNT_DYNCLK) += clk-dglnt-dynclk.o + obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o + obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o + obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o +diff --git a/drivers/clk/clk-dglnt-dynclk.c b/drivers/clk/clk-dglnt-dynclk.c +new file mode 100644 +index 0000000000..496ad5fc90 +--- /dev/null ++++ b/drivers/clk/clk-dglnt-dynclk.c +@@ -0,0 +1,547 @@ ++/* ++ * clk-dglnt-dynclk.c - Digilent AXI Dynamic Clock (axi_dynclk) Driver ++ * ++ * Copyright (C) 2015 Digilent ++ * Author: Sam Bobrowicz <sbobrowicz@digilentinc.com> ++ * ++ * Reused code from clk-axi-clkgen.c, Copyright (C) 2012-2013 Analog Devices Inc. ++ * ++ * This software is licensed under the terms of the GNU General Public ++ * License version 2, as published by the Free Software Foundation, and ++ * may be copied, distributed, and modified under those terms. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/platform_device.h> ++#include <linux/clk-provider.h> ++#include <linux/clk.h> ++#include <linux/slab.h> ++#include <linux/io.h> ++#include <linux/of.h> ++#include <linux/module.h> ++#include <linux/err.h> ++#include <linux/kernel.h> ++ ++#define CLK_BIT_WEDGE 13 ++#define CLK_BIT_NOCOUNT 12 ++ ++/* This value is used to signal an error */ ++#define ERR_CLKCOUNTCALC 0xFFFFFFFF ++#define ERR_CLKDIVIDER (1 << CLK_BIT_WEDGE | 1 << CLK_BIT_NOCOUNT) ++ ++#define DYNCLK_DIV_1_REGMASK 0x1041 ++/* 25 MHz (125 KHz / 5) */ ++#define DYNCLK_DEFAULT_FREQ 125000 ++ ++#define MMCM_FREQ_VCOMIN 600000 ++#define MMCM_FREQ_VCOMAX 1200000 ++#define MMCM_FREQ_PFDMIN 10000 ++#define MMCM_FREQ_PFDMAX 450000 ++#define MMCM_FREQ_OUTMIN 4000 ++#define MMCM_FREQ_OUTMAX 800000 ++#define MMCM_DIV_MAX 106 ++#define MMCM_FB_MIN 2 ++#define MMCM_FB_MAX 64 ++#define MMCM_CLKDIV_MAX 128 ++#define MMCM_CLKDIV_MIN 1 ++ ++#define OFST_DISPLAY_CTRL 0x0 ++#define OFST_DISPLAY_STATUS 0x4 ++#define OFST_DISPLAY_CLK_L 0x8 ++#define OFST_DISPLAY_FB_L 0x0C ++#define OFST_DISPLAY_FB_H_CLK_H 0x10 ++#define OFST_DISPLAY_DIV 0x14 ++#define OFST_DISPLAY_LOCK_L 0x18 ++#define OFST_DISPLAY_FLTR_LOCK_H 0x1C ++ ++static const u64 lock_lookup[64] = { ++ 0b0011000110111110100011111010010000000001, ++ 0b0011000110111110100011111010010000000001, ++ 0b0100001000111110100011111010010000000001, ++ 0b0101101011111110100011111010010000000001, ++ 0b0111001110111110100011111010010000000001, ++ 0b1000110001111110100011111010010000000001, ++ 0b1001110011111110100011111010010000000001, ++ 0b1011010110111110100011111010010000000001, ++ 0b1100111001111110100011111010010000000001, ++ 0b1110011100111110100011111010010000000001, ++ 0b1111111111111000010011111010010000000001, ++ 0b1111111111110011100111111010010000000001, ++ 0b1111111111101110111011111010010000000001, ++ 0b1111111111101011110011111010010000000001, ++ 0b1111111111101000101011111010010000000001, ++ 0b1111111111100111000111111010010000000001, ++ 0b1111111111100011111111111010010000000001, ++ 0b1111111111100010011011111010010000000001, ++ 0b1111111111100000110111111010010000000001, ++ 0b1111111111011111010011111010010000000001, ++ 0b1111111111011101101111111010010000000001, ++ 0b1111111111011100001011111010010000000001, ++ 0b1111111111011010100111111010010000000001, ++ 0b1111111111011001000011111010010000000001, ++ 0b1111111111011001000011111010010000000001, ++ 0b1111111111010111011111111010010000000001, ++ 0b1111111111010101111011111010010000000001, ++ 0b1111111111010101111011111010010000000001, ++ 0b1111111111010100010111111010010000000001, ++ 0b1111111111010100010111111010010000000001, ++ 0b1111111111010010110011111010010000000001, ++ 0b1111111111010010110011111010010000000001, ++ 0b1111111111010010110011111010010000000001, ++ 0b1111111111010001001111111010010000000001, ++ 0b1111111111010001001111111010010000000001, ++ 0b1111111111010001001111111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001, ++ 0b1111111111001111101011111010010000000001 ++}; ++ ++static const u32 filter_lookup_low[64] = { ++ 0b0001011111, ++ 0b0001010111, ++ 0b0001111011, ++ 0b0001011011, ++ 0b0001101011, ++ 0b0001110011, ++ 0b0001110011, ++ 0b0001110011, ++ 0b0001110011, ++ 0b0001001011, ++ 0b0001001011, ++ 0b0001001011, ++ 0b0010110011, ++ 0b0001010011, ++ 0b0001010011, ++ 0b0001010011, ++ 0b0001010011, ++ 0b0001010011, ++ 0b0001010011, ++ 0b0001010011, ++ 0b0001010011, ++ 0b0001010011, ++ 0b0001010011, ++ 0b0001100011, ++ 0b0001100011, ++ 0b0001100011, ++ 0b0001100011, ++ 0b0001100011, ++ 0b0001100011, ++ 0b0001100011, ++ 0b0001100011, ++ 0b0001100011, ++ 0b0001100011, ++ 0b0001100011, ++ 0b0001100011, ++ 0b0001100011, ++ 0b0001100011, ++ 0b0010010011, ++ 0b0010010011, ++ 0b0010010011, ++ 0b0010010011, ++ 0b0010010011, ++ 0b0010010011, ++ 0b0010010011, ++ 0b0010010011, ++ 0b0010010011, ++ 0b0010010011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011, ++ 0b0010100011 ++}; ++ ++struct dglnt_dynclk_reg; ++struct dglnt_dynclk_mode; ++struct dglnt_dynclk; ++ ++struct dglnt_dynclk_reg { ++ u32 clk0L; ++ u32 clkFBL; ++ u32 clkFBH_clk0H; ++ u32 divclk; ++ u32 lockL; ++ u32 fltr_lockH; ++}; ++ ++struct dglnt_dynclk_mode { ++ u32 freq; ++ u32 fbmult; ++ u32 clkdiv; ++ u32 maindiv; ++}; ++ ++struct dglnt_dynclk { ++ void __iomem *base; ++ struct clk_hw clk_hw; ++ unsigned long freq; ++}; ++ ++u32 dglnt_dynclk_divider(u32 divide) ++{ ++ u32 output = 0; ++ u32 highTime = 0; ++ u32 lowTime = 0; ++ ++ if ((divide < 1) || (divide > 128)) ++ return ERR_CLKDIVIDER; ++ ++ if (divide == 1) ++ return DYNCLK_DIV_1_REGMASK; ++ ++ highTime = divide / 2; ++ /* if divide is odd */ ++ if (divide & 0x1) { ++ lowTime = highTime + 1; ++ output = 1 << CLK_BIT_WEDGE; ++ } else { ++ lowTime = highTime; ++ } ++ ++ output |= 0x03F & lowTime; ++ output |= 0xFC0 & (highTime << 6); ++ return output; ++} ++ ++u32 dglnt_dynclk_count_calc(u32 divide) ++{ ++ u32 output = 0; ++ u32 divCalc = 0; ++ ++ divCalc = dglnt_dynclk_divider(divide); ++ if (divCalc == ERR_CLKDIVIDER) ++ output = ERR_CLKCOUNTCALC; ++ else ++ output = (0xFFF & divCalc) | ((divCalc << 10) & 0x00C00000); ++ return output; ++} ++ ++ ++int dglnt_dynclk_find_reg(struct dglnt_dynclk_reg *regValues, ++ struct dglnt_dynclk_mode *clkParams) ++{ ++ if ((clkParams->fbmult < 2) || clkParams->fbmult > 64) ++ return -EINVAL; ++ ++ regValues->clk0L = dglnt_dynclk_count_calc(clkParams->clkdiv); ++ if (regValues->clk0L == ERR_CLKCOUNTCALC) ++ return -EINVAL; ++ ++ regValues->clkFBL = dglnt_dynclk_count_calc(clkParams->fbmult); ++ if (regValues->clkFBL == ERR_CLKCOUNTCALC) ++ return -EINVAL; ++ ++ regValues->clkFBH_clk0H = 0; ++ ++ regValues->divclk = dglnt_dynclk_divider(clkParams->maindiv); ++ if (regValues->divclk == ERR_CLKDIVIDER) ++ return -EINVAL; ++ ++ regValues->lockL = (u32)(lock_lookup[clkParams->fbmult - 1] & ++ 0xFFFFFFFF); ++ ++ regValues->fltr_lockH = (u32)((lock_lookup[clkParams->fbmult - 1] >> ++ 32) & 0x000000FF); ++ regValues->fltr_lockH |= ((filter_lookup_low[clkParams->fbmult - 1] << ++ 16) & 0x03FF0000); ++ ++ return 0; ++} ++ ++void dglnt_dynclk_write_reg(struct dglnt_dynclk_reg *regValues, ++ void __iomem *baseaddr) ++{ ++ writel(regValues->clk0L, baseaddr + OFST_DISPLAY_CLK_L); ++ writel(regValues->clkFBL, baseaddr + OFST_DISPLAY_FB_L); ++ writel(regValues->clkFBH_clk0H, baseaddr + OFST_DISPLAY_FB_H_CLK_H); ++ writel(regValues->divclk, baseaddr + OFST_DISPLAY_DIV); ++ writel(regValues->lockL, baseaddr + OFST_DISPLAY_LOCK_L); ++ writel(regValues->fltr_lockH, baseaddr + OFST_DISPLAY_FLTR_LOCK_H); ++} ++ ++u32 dglnt_dynclk_find_mode(u32 freq, u32 parentFreq, ++ struct dglnt_dynclk_mode *bestPick) ++{ ++ u32 bestError = MMCM_FREQ_OUTMAX; ++ u32 curError; ++ u32 curClkMult; ++ u32 curFreq; ++ u32 divVal; ++ u32 curFb, curClkDiv; ++ u32 minFb = 0; ++ u32 maxFb = 0; ++ u32 curDiv = 1; ++ u32 maxDiv; ++ bool freq_found = false; ++ ++ bestPick->freq = 0; ++ if (parentFreq == 0) ++ return 0; ++ ++ /* minimum frequency is actually dictated by VCOmin */ ++ if (freq < MMCM_FREQ_OUTMIN) ++ freq = MMCM_FREQ_OUTMIN; ++ if (freq > MMCM_FREQ_OUTMAX) ++ freq = MMCM_FREQ_OUTMAX; ++ ++ if (parentFreq > MMCM_FREQ_PFDMAX) ++ curDiv = 2; ++ maxDiv = parentFreq / MMCM_FREQ_PFDMIN; ++ if (maxDiv > MMCM_DIV_MAX) ++ maxDiv = MMCM_DIV_MAX; ++ ++ while (curDiv <= maxDiv && !freq_found) { ++ minFb = curDiv * DIV_ROUND_UP(MMCM_FREQ_VCOMIN, parentFreq); ++ maxFb = curDiv * (MMCM_FREQ_VCOMAX / parentFreq); ++ if (maxFb > MMCM_FB_MAX) ++ maxFb = MMCM_FB_MAX; ++ if (minFb < MMCM_FB_MIN) ++ minFb = MMCM_FB_MIN; ++ ++ divVal = curDiv * freq; ++ /* ++ * This multiplier is used to find the best clkDiv value for ++ * each FB value ++ */ ++ curClkMult = ((parentFreq * 1000) + (divVal / 2)) / divVal; ++ ++ curFb = minFb; ++ while (curFb <= maxFb && !freq_found) { ++ curClkDiv = ((curClkMult * curFb) + 500) / 1000; ++ if (curClkDiv > MMCM_CLKDIV_MAX) ++ curClkDiv = MMCM_CLKDIV_MAX; ++ if (curClkDiv < MMCM_CLKDIV_MIN) ++ curClkDiv = MMCM_CLKDIV_MIN; ++ curFreq = (((parentFreq * curFb) / curDiv) / curClkDiv); ++ if (curFreq >= freq) ++ curError = curFreq - freq; ++ else ++ curError = freq - curFreq; ++ if (curError < bestError) { ++ bestError = curError; ++ bestPick->clkdiv = curClkDiv; ++ bestPick->fbmult = curFb; ++ bestPick->maindiv = curDiv; ++ bestPick->freq = curFreq; ++ } ++ if (!curError) ++ freq_found = true; ++ curFb++; ++ } ++ curDiv++; ++ } ++ return bestPick->freq; ++} ++ ++static struct dglnt_dynclk *clk_hw_to_dglnt_dynclk(struct clk_hw *clk_hw) ++{ ++ return container_of(clk_hw, struct dglnt_dynclk, clk_hw); ++} ++ ++ ++static int dglnt_dynclk_enable(struct clk_hw *clk_hw) ++{ ++ struct dglnt_dynclk *dglnt_dynclk = clk_hw_to_dglnt_dynclk(clk_hw); ++ unsigned int clock_state; ++ ++ if (dglnt_dynclk->freq) { ++ writel(1, dglnt_dynclk->base + OFST_DISPLAY_CTRL); ++ do { ++ clock_state = readl(dglnt_dynclk->base + ++ OFST_DISPLAY_STATUS); ++ } while (!clock_state); ++ } ++ return 0; ++} ++ ++static void dglnt_dynclk_disable(struct clk_hw *clk_hw) ++{ ++ struct dglnt_dynclk *dglnt_dynclk = clk_hw_to_dglnt_dynclk(clk_hw); ++ ++ writel(0, dglnt_dynclk->base + OFST_DISPLAY_CTRL); ++} ++ ++static int dglnt_dynclk_set_rate(struct clk_hw *clk_hw, ++ unsigned long rate, unsigned long parent_rate) ++{ ++ struct dglnt_dynclk *dglnt_dynclk = clk_hw_to_dglnt_dynclk(clk_hw); ++ struct dglnt_dynclk_reg clkReg; ++ struct dglnt_dynclk_mode clkMode; ++ ++ if (parent_rate == 0 || rate == 0) ++ return -EINVAL; ++ if (rate == dglnt_dynclk->freq) ++ return 0; ++ ++ /* ++ * Convert from Hz to KHz, then multiply by five to account for ++ * BUFR division ++ */ ++ rate = (rate + 100) / 200; ++ /* convert from Hz to KHz */ ++ parent_rate = (parent_rate + 500) / 1000; ++ if (!dglnt_dynclk_find_mode(rate, parent_rate, &clkMode)) ++ return -EINVAL; ++ ++ /* ++ * Write to the PLL dynamic configuration registers to configure it ++ * with the calculated parameters. ++ */ ++ dglnt_dynclk_find_reg(&clkReg, &clkMode); ++ dglnt_dynclk_write_reg(&clkReg, dglnt_dynclk->base); ++ dglnt_dynclk->freq = clkMode.freq * 200; ++ dglnt_dynclk_disable(clk_hw); ++ dglnt_dynclk_enable(clk_hw); ++ ++ return 0; ++} ++ ++static long dglnt_dynclk_round_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ struct dglnt_dynclk_mode clkMode; ++ ++ dglnt_dynclk_find_mode(((rate + 100) / 200), ++ ((*parent_rate) + 500) / 1000, &clkMode); ++ ++ return (clkMode.freq * 200); ++} ++ ++static unsigned long dglnt_dynclk_recalc_rate(struct clk_hw *clk_hw, ++ unsigned long parent_rate) ++{ ++ struct dglnt_dynclk *dglnt_dynclk = clk_hw_to_dglnt_dynclk(clk_hw); ++ ++ return dglnt_dynclk->freq; ++} ++ ++ ++static const struct clk_ops dglnt_dynclk_ops = { ++ .recalc_rate = dglnt_dynclk_recalc_rate, ++ .round_rate = dglnt_dynclk_round_rate, ++ .set_rate = dglnt_dynclk_set_rate, ++ .enable = dglnt_dynclk_enable, ++ .disable = dglnt_dynclk_disable, ++}; ++ ++static const struct of_device_id dglnt_dynclk_ids[] = { ++ { .compatible = "digilent,axi-dynclk", }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, dglnt_dynclk_ids); ++ ++static int dglnt_dynclk_probe(struct platform_device *pdev) ++{ ++ const struct of_device_id *id; ++ struct dglnt_dynclk *dglnt_dynclk; ++ struct clk_init_data init; ++ const char *parent_name; ++ const char *clk_name; ++ struct resource *mem; ++ struct clk *clk; ++ ++ if (!pdev->dev.of_node) ++ return -ENODEV; ++ ++ id = of_match_node(dglnt_dynclk_ids, pdev->dev.of_node); ++ if (!id) ++ return -ENODEV; ++ ++ dglnt_dynclk = devm_kzalloc(&pdev->dev, sizeof(*dglnt_dynclk), ++ GFP_KERNEL); ++ if (!dglnt_dynclk) ++ return -ENOMEM; ++ ++ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ dglnt_dynclk->base = devm_ioremap_resource(&pdev->dev, mem); ++ if (IS_ERR(dglnt_dynclk->base)) ++ return PTR_ERR(dglnt_dynclk->base); ++ ++ parent_name = of_clk_get_parent_name(pdev->dev.of_node, 0); ++ if (!parent_name) ++ return -EINVAL; ++ ++ clk_name = pdev->dev.of_node->name; ++ of_property_read_string(pdev->dev.of_node, "clock-output-names", ++ &clk_name); ++ ++ init.name = clk_name; ++ init.ops = &dglnt_dynclk_ops; ++ init.flags = 0; ++ init.parent_names = &parent_name; ++ init.num_parents = 1; ++ ++ dglnt_dynclk->freq = 0; ++ dglnt_dynclk_disable(&dglnt_dynclk->clk_hw); ++ ++ dglnt_dynclk->clk_hw.init = &init; ++ clk = devm_clk_register(&pdev->dev, &dglnt_dynclk->clk_hw); ++ if (IS_ERR(clk)) ++ return PTR_ERR(clk); ++ ++ return of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get, ++ clk); ++} ++ ++static int dglnt_dynclk_remove(struct platform_device *pdev) ++{ ++ of_clk_del_provider(pdev->dev.of_node); ++ ++ return 0; ++} ++ ++static struct platform_driver dglnt_dynclk_driver = { ++ .driver = { ++ .name = "dglnt-dynclk", ++ .owner = THIS_MODULE, ++ .of_match_table = dglnt_dynclk_ids, ++ }, ++ .probe = dglnt_dynclk_probe, ++ .remove = dglnt_dynclk_remove, ++}; ++module_platform_driver(dglnt_dynclk_driver); ++ ++MODULE_LICENSE("GPL v2"); ++MODULE_AUTHOR("Sam Bobrowicz <sbobrowicz@digilentinc.com>"); ++MODULE_DESCRIPTION("CCF Driver for Digilent axi_dynclk IP Core"); +-- +2.14.2 + diff --git a/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0003-drm-xilinx-Fix-DPMS-transition-to-on.patch b/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0003-drm-xilinx-Fix-DPMS-transition-to-on.patch new file mode 100644 index 00000000..a98d84c5 --- /dev/null +++ b/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0003-drm-xilinx-Fix-DPMS-transition-to-on.patch @@ -0,0 +1,54 @@ +From 1a18e2b514ae9e75145597ac509a87f656c976ba Mon Sep 17 00:00:00 2001 +From: Nathan Rossi <nathan@nathanrossi.com> +Date: Mon, 2 May 2016 23:46:42 +1000 +Subject: [PATCH 3/3] drm: xilinx: Fix DPMS transition to on + +Fix the issues where the VTC is reset (losing its timing config). + +Also fix the issue where the plane destroys its DMA descriptors and +marks the DMA channels as inactive but never recreates the descriptors +and never updates the active state when turning DPMS back on. + +Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> +Upstream-Status: Pending [This is a workaround] +--- + drivers/gpu/drm/xilinx/xilinx_drm_crtc.c | 1 - + drivers/gpu/drm/xilinx/xilinx_drm_plane.c | 3 ++- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/drivers/gpu/drm/xilinx/xilinx_drm_crtc.c b/drivers/gpu/drm/xilinx/xilinx_drm_crtc.c +index 631d35b921..93dbd4b58a 100644 +--- a/drivers/gpu/drm/xilinx/xilinx_drm_crtc.c ++++ b/drivers/gpu/drm/xilinx/xilinx_drm_crtc.c +@@ -88,7 +88,6 @@ static void xilinx_drm_crtc_dpms(struct drm_crtc *base_crtc, int dpms) + default: + if (crtc->vtc) { + xilinx_vtc_disable(crtc->vtc); +- xilinx_vtc_reset(crtc->vtc); + } + if (crtc->cresample) { + xilinx_cresample_disable(crtc->cresample); +diff --git a/drivers/gpu/drm/xilinx/xilinx_drm_plane.c b/drivers/gpu/drm/xilinx/xilinx_drm_plane.c +index 6a248b72d4..d2518a4bdf 100644 +--- a/drivers/gpu/drm/xilinx/xilinx_drm_plane.c ++++ b/drivers/gpu/drm/xilinx/xilinx_drm_plane.c +@@ -140,7 +140,7 @@ void xilinx_drm_plane_commit(struct drm_plane *base_plane) + for (i = 0; i < MAX_NUM_SUB_PLANES; i++) { + struct xilinx_drm_plane_dma *dma = &plane->dma[i]; + +- if (dma->chan && dma->is_active) { ++ if (dma->chan) { + flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; + desc = dmaengine_prep_interleaved_dma(dma->chan, + &dma->xt, +@@ -153,6 +153,7 @@ void xilinx_drm_plane_commit(struct drm_plane *base_plane) + dmaengine_submit(desc); + + dma_async_issue_pending(dma->chan); ++ dma->is_active = true; + } + } + } +-- +2.14.2 + diff --git a/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx_2018.1.bbappend b/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx_2018.1.bbappend new file mode 100644 index 00000000..83b08f1b --- /dev/null +++ b/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx_2018.1.bbappend @@ -0,0 +1,8 @@ +FILESEXTRAPATHS_prepend := "${THISDIR}/linux-xlnx:" + +SRC_URI_append_zybo-linux-bd-zynq7 = " \ + file://0001-drm-xilinx-Add-encoder-for-Digilent-boards.patch \ + file://0002-clk-Add-driver-for-axi_dynclk-IP-Core.patch \ + file://0003-drm-xilinx-Fix-DPMS-transition-to-on.patch \ + " + |