diff options
Diffstat (limited to 'dynamic-layers/openembedded-layer')
6 files changed, 116 insertions, 1 deletions
diff --git a/dynamic-layers/openembedded-layer/recipes-core/packagegroups/packagegroup-meta-oe.bbappend b/dynamic-layers/openembedded-layer/recipes-core/packagegroups/packagegroup-meta-oe.bbappend index 25423d0..8d458c8 100644 --- a/dynamic-layers/openembedded-layer/recipes-core/packagegroups/packagegroup-meta-oe.bbappend +++ b/dynamic-layers/openembedded-layer/recipes-core/packagegroups/packagegroup-meta-oe.bbappend @@ -1 +1 @@ -RDEPENDS_packagegroup-meta-oe-kernel_remove_rpi = "bpftool" +RDEPENDS:packagegroup-meta-oe-kernel:remove:rpi = "bpftool" diff --git a/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-blinka_6.2.2.bb b/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-blinka_6.2.2.bb new file mode 100644 index 0000000..9e1e357 --- /dev/null +++ b/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-blinka_6.2.2.bb @@ -0,0 +1,33 @@ +SUMMARY = "CircuitPython APIs for non-CircuitPython versions of Python such as CPython on Linux and MicroPython." +HOMEPAGE = "https://github.com/adafruit/Adafruit_Blinka" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://LICENSE;md5=660e614bc7efb0697cc793d8a22a55c2" + +SRC_URI = "git://github.com/adafruit/Adafruit_Blinka.git;branch=main;protocol=https" +SRCREV = "dc688f354fe779c9267c208b99f310af87e79272" + +S = "${WORKDIR}/git" + +inherit setuptools3 + +DEPENDS += "python3-setuptools-scm-native" + +do_install:append() { +# it ships ./bcm283x/pulseio/libgpiod_pulsein which is a prebuilt +# 32bit binary therefore we should make this specific to 32bit rpi machines (based on bcm283x) only + if [ ${@bb.utils.contains('TUNE_FEATURES', 'callconvention-hard', '1', '0', d)} = "0" ]; then + rm -rf ${D}${PYTHON_SITEPACKAGES_DIR}/adafruit_blinka/microcontroller/bcm283x + fi +} + +RDEPENDS:${PN} += " \ + libgpiod \ + python3-adafruit-platformdetect \ + python3-adafruit-pureio \ + python3-core \ +" + +RDEPENDS:${PN}:append:rpi = " rpi-gpio" + +COMPATIBLE_HOST:libc-musl:class-target = "null" + diff --git a/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-circuitpython-busdevice_5.0.5.bb b/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-circuitpython-busdevice_5.0.5.bb new file mode 100644 index 0000000..93491d4 --- /dev/null +++ b/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-circuitpython-busdevice_5.0.5.bb @@ -0,0 +1,19 @@ +SUMMARY = "CircuitPython bus device classes to manage bus sharing." +HOMEPAGE = "https://github.com/adafruit/Adafruit_CircuitPython_BusDevice" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://LICENSE;md5=6ec69d6e9e6c85adfb7799d7f8cf044e" + +SRC_URI = "git://github.com/adafruit/Adafruit_CircuitPython_BusDevice.git;branch=main;protocol=https" +SRCREV = "1bfe8005293205e2f7b2cc498ab5a946f1133b40" + +S = "${WORKDIR}/git" + +inherit setuptools3 + +DEPENDS += "python3-setuptools-scm-native" + +RDEPENDS:${PN} += " \ + python3-adafruit-blinka \ + python3-core \ +" +COMPATIBLE_HOST:libc-musl:class-target = "null" diff --git a/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-circuitpython-motor_3.2.6.bb b/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-circuitpython-motor_3.2.6.bb new file mode 100644 index 0000000..3233c8f --- /dev/null +++ b/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-circuitpython-motor_3.2.6.bb @@ -0,0 +1,19 @@ +SUMMARY = "CircuitPython helper library provides higher level objects to control motors and servos." +HOMEPAGE = "https://github.com/adafruit/Adafruit_CircuitPython_Motor" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://LICENSE;md5=b72678307cc7c10910b5ef460216af07" + +SRC_URI = "git://github.com/adafruit/Adafruit_CircuitPython_Motor.git;branch=main;protocol=https" +SRCREV = "2251bfc0501d0acfb96c0a43f4f2b4c6a10ca14e" + +S = "${WORKDIR}/git" + +inherit setuptools3 + +DEPENDS += "python3-setuptools-scm-native" + +RDEPENDS:${PN} += " \ + python3-adafruit-blinka \ + python3-core \ +" +COMPATIBLE_HOST:libc-musl:class-target = "null" diff --git a/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-circuitpython-motorkit_1.6.1.bb b/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-circuitpython-motorkit_1.6.1.bb new file mode 100644 index 0000000..39fe76a --- /dev/null +++ b/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-circuitpython-motorkit_1.6.1.bb @@ -0,0 +1,23 @@ +SUMMARY = "CircuitPython helper library for DC & Stepper Motor FeatherWing, Shield, and Pi Hat kits." +HOMEPAGE = "https://github.com/adafruit/Adafruit_CircuitPython_MotorKit" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://LICENSE;md5=6ad4a8854b39ad474755ef1aea813bac" + +SRC_URI = "git://github.com/adafruit/Adafruit_CircuitPython_MotorKit.git;branch=main;protocol=https" +SRCREV = "8c1462b4129b21f6db156d1517abb017bb74b982" + +S = "${WORKDIR}/git" + +inherit setuptools3 + +DEPENDS += "python3-setuptools-scm-native" + +RDEPENDS:${PN} += " \ + python3-adafruit-blinka \ + python3-adafruit-circuitpython-busdevice \ + python3-adafruit-circuitpython-motor \ + python3-adafruit-circuitpython-pca9685 \ + python3-adafruit-circuitpython-register \ + python3-core \ +" +COMPATIBLE_HOST:libc-musl:class-target = "null" diff --git a/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-circuitpython-pca9685_3.3.4.bb b/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-circuitpython-pca9685_3.3.4.bb new file mode 100644 index 0000000..f7f0ff1 --- /dev/null +++ b/dynamic-layers/openembedded-layer/recipes-devtools/python/python3-adafruit-circuitpython-pca9685_3.3.4.bb @@ -0,0 +1,21 @@ +SUMMARY = "CircuitPython driver for motor, stepper, and servo based on PCA9685." +HOMEPAGE = "https://github.com/adafruit/Adafruit_CircuitPython_PCA9685" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://LICENSE;md5=e7eb6b599fb0cfb06485c64cd4242f62" + +SRC_URI = "git://github.com/adafruit/Adafruit_CircuitPython_PCA9685.git;branch=main;protocol=https" +SRCREV = "2780c4102f4c23fbab252aa1198b61ba7e2d1b2c" + +S = "${WORKDIR}/git" + +inherit setuptools3 + +DEPENDS += "python3-setuptools-scm-native" + +RDEPENDS:${PN} += " \ + python3-adafruit-blinka \ + python3-adafruit-circuitpython-busdevice \ + python3-adafruit-circuitpython-register \ + python3-core \ +" +COMPATIBLE_HOST:libc-musl:class-target = "null" |