1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
|
From 0d0bc7efea6467b62936ebcb6084b39045f3f0d7 Mon Sep 17 00:00:00 2001
From: Sudheesh Mavila <sudheesh.mavila@amd.com>
Date: Thu, 24 Jan 2019 11:50:47 +0530
Subject: [PATCH 0592/2940] mmc: sdhci: Add 32-bit block count support for v4
mode
Host Controller Version 4.10 re-defines SDMA System Address register
as 32-bit Block Count for v4 mode, and SDMA uses ADMA System
Address register (05Fh-058h) instead if v4 mode is enabled. Also
when using 32-bit block count, 16-bit block count register need
to be set to zero.
Since using 32-bit Block Count would cause problems for auto-cmd23,
it can be chosen via host->quirk2.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
---
drivers/mmc/host/sdhci.c | 14 +++++++++++++-
drivers/mmc/host/sdhci.h | 8 ++++++++
2 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 608887d1ef51..b109251aff9e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1072,7 +1072,19 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
/* Set the DMA boundary value and block size */
sdhci_writew(host, SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz),
SDHCI_BLOCK_SIZE);
- sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
+
+ /*
+ * For Version 4.10 onwards, if v4 mode is enabled, 32-bit Block Count
+ * can be supported, in that case 16-bit block count register must be 0.
+ */
+ if (host->version >= SDHCI_SPEC_410 && host->v4_mode &&
+ (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) {
+ if (sdhci_readw(host, SDHCI_BLOCK_COUNT))
+ sdhci_writew(host, 0, SDHCI_BLOCK_COUNT);
+ sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT);
+ } else {
+ sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
+ }
}
static inline bool sdhci_auto_cmd12(struct sdhci_host *host,
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index de5b92aa3f32..22b448c8b7f9 100755
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -28,6 +28,7 @@
#define SDHCI_DMA_ADDRESS 0x00
#define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS
+#define SDHCI_32BIT_BLK_CNT SDHCI_DMA_ADDRESS
#define SDHCI_BLOCK_SIZE 0x04
#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
@@ -462,6 +463,13 @@ struct sdhci_host {
* obtainable timeout.
*/
#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17)
+/*
+ * 32-bit block count may not support eMMC where upper bits of CMD23 are used
+ * for other purposes. Consequently we support 16-bit block count by default.
+ * Otherwise, SDHCI_QUIRK2_USE_32BIT_BLK_CNT can be selected to use 32-bit
+ * block count.
+ */
+#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
--
2.17.1
|
