summaryrefslogtreecommitdiffstats
path: root/drivers/input/serio/ps2-gpio.c
blob: 8970b49ea09a25053d79b90b79014f3619badc37 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
// SPDX-License-Identifier: GPL-2.0-only
/*
 * GPIO based serio bus driver for bit banging the PS/2 protocol
 *
 * Author: Danilo Krummrich <danilokrummrich@dk-develop.de>
 */

#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/serio.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/workqueue.h>
#include <linux/completion.h>
#include <linux/mutex.h>
#include <linux/preempt.h>
#include <linux/property.h>
#include <linux/of.h>
#include <linux/jiffies.h>
#include <linux/delay.h>

#define DRIVER_NAME		"ps2-gpio"

#define PS2_MODE_RX		0
#define PS2_MODE_TX		1

#define PS2_START_BIT		0
#define PS2_DATA_BIT0		1
#define PS2_DATA_BIT1		2
#define PS2_DATA_BIT2		3
#define PS2_DATA_BIT3		4
#define PS2_DATA_BIT4		5
#define PS2_DATA_BIT5		6
#define PS2_DATA_BIT6		7
#define PS2_DATA_BIT7		8
#define PS2_PARITY_BIT		9
#define PS2_STOP_BIT		10
#define PS2_TX_TIMEOUT		11
#define PS2_ACK_BIT		12

#define PS2_DEV_RET_ACK		0xfa
#define PS2_DEV_RET_NACK	0xfe

#define PS2_CMD_RESEND		0xfe

struct ps2_gpio_data {
	struct device *dev;
	struct serio *serio;
	unsigned char mode;
	struct gpio_desc *gpio_clk;
	struct gpio_desc *gpio_data;
	bool write_enable;
	int irq;
	unsigned char rx_cnt;
	unsigned char rx_byte;
	unsigned char tx_cnt;
	unsigned char tx_byte;
	struct completion tx_done;
	struct mutex tx_mutex;
	struct delayed_work tx_work;
};

static int ps2_gpio_open(struct serio *serio)
{
	struct ps2_gpio_data *drvdata = serio->port_data;

	enable_irq(drvdata->irq);
	return 0;
}

static void ps2_gpio_close(struct serio *serio)
{
	struct ps2_gpio_data *drvdata = serio->port_data;

	flush_delayed_work(&drvdata->tx_work);
	disable_irq(drvdata->irq);
}

static int __ps2_gpio_write(struct serio *serio, unsigned char val)
{
	struct ps2_gpio_data *drvdata = serio->port_data;

	disable_irq_nosync(drvdata->irq);
	gpiod_direction_output(drvdata->gpio_clk, 0);

	drvdata->mode = PS2_MODE_TX;
	drvdata->tx_byte = val;

	schedule_delayed_work(&drvdata->tx_work, usecs_to_jiffies(200));

	return 0;
}

static int ps2_gpio_write(struct serio *serio, unsigned char val)
{
	struct ps2_gpio_data *drvdata = serio->port_data;
	int ret = 0;

	if (in_task()) {
		mutex_lock(&drvdata->tx_mutex);
		__ps2_gpio_write(serio, val);
		if (!wait_for_completion_timeout(&drvdata->tx_done,
						 msecs_to_jiffies(10000)))
			ret = SERIO_TIMEOUT;
		mutex_unlock(&drvdata->tx_mutex);
	} else {
		__ps2_gpio_write(serio, val);
	}

	return ret;
}

static void ps2_gpio_tx_work_fn(struct work_struct *work)
{
	struct delayed_work *dwork = to_delayed_work(work);
	struct ps2_gpio_data *drvdata = container_of(dwork,
						    struct ps2_gpio_data,
						    tx_work);

	enable_irq(drvdata->irq);
	gpiod_direction_output(drvdata->gpio_data, 0);
	gpiod_direction_input(drvdata->gpio_clk);
}

static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata)
{
	unsigned char byte, cnt;
	int data;
	int rxflags = 0;
	static unsigned long old_jiffies;

	byte = drvdata->rx_byte;
	cnt = drvdata->rx_cnt;

	if (old_jiffies == 0)
		old_jiffies = jiffies;

	if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) {
		dev_err(drvdata->dev,
			"RX: timeout, probably we missed an interrupt\n");
		goto err;
	}
	old_jiffies = jiffies;

	data = gpiod_get_value(drvdata->gpio_data);
	if (unlikely(data < 0)) {
		dev_err(drvdata->dev, "RX: failed to get data gpio val: %d\n",
			data);
		goto err;
	}

	switch (cnt) {
	case PS2_START_BIT:
		/* start bit should be low */
		if (unlikely(data)) {
			dev_err(drvdata->dev, "RX: start bit should be low\n");
			goto err;
		}
		break;
	case PS2_DATA_BIT0:
	case PS2_DATA_BIT1:
	case PS2_DATA_BIT2:
	case PS2_DATA_BIT3:
	case PS2_DATA_BIT4:
	case PS2_DATA_BIT5:
	case PS2_DATA_BIT6:
	case PS2_DATA_BIT7:
		/* processing data bits */
		if (data)
			byte |= (data << (cnt - 1));
		break;
	case PS2_PARITY_BIT:
		/* check odd parity */
		if (!((hweight8(byte) & 1) ^ data)) {
			rxflags |= SERIO_PARITY;
			dev_warn(drvdata->dev, "RX: parity error\n");
			if (!drvdata->write_enable)
				goto err;
		}

		/* Do not send spurious ACK's and NACK's when write fn is
		 * not provided.
		 */
		if (!drvdata->write_enable) {
			if (byte == PS2_DEV_RET_NACK)
				goto err;
			else if (byte == PS2_DEV_RET_ACK)
				break;
		}

		/* Let's send the data without waiting for the stop bit to be
		 * sent. It may happen that we miss the stop bit. When this
		 * happens we have no way to recover from this, certainly
		 * missing the parity bit would be recognized when processing
		 * the stop bit. When missing both, data is lost.
		 */
		serio_interrupt(drvdata->serio, byte, rxflags);
		dev_dbg(drvdata->dev, "RX: sending byte 0x%x\n", byte);
		break;
	case PS2_STOP_BIT:
		/* stop bit should be high */
		if (unlikely(!data)) {
			dev_err(drvdata->dev, "RX: stop bit should be high\n");
			goto err;
		}
		cnt = byte = 0;
		old_jiffies = 0;
		goto end; /* success */
	default:
		dev_err(drvdata->dev, "RX: got out of sync with the device\n");
		goto err;
	}

	cnt++;
	goto end; /* success */

err:
	cnt = byte = 0;
	old_jiffies = 0;
	__ps2_gpio_write(drvdata->serio, PS2_CMD_RESEND);
end:
	drvdata->rx_cnt = cnt;
	drvdata->rx_byte = byte;
	return IRQ_HANDLED;
}

static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata)
{
	unsigned char byte, cnt;
	int data;
	static unsigned long old_jiffies;

	cnt = drvdata->tx_cnt;
	byte = drvdata->tx_byte;

	if (old_jiffies == 0)
		old_jiffies = jiffies;

	if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) {
		dev_err(drvdata->dev,
			"TX: timeout, probably we missed an interrupt\n");
		goto err;
	}
	old_jiffies = jiffies;

	switch (cnt) {
	case PS2_START_BIT:
		/* should never happen */
		dev_err(drvdata->dev,
			"TX: start bit should have been sent already\n");
		goto err;
	case PS2_DATA_BIT0:
	case PS2_DATA_BIT1:
	case PS2_DATA_BIT2:
	case PS2_DATA_BIT3:
	case PS2_DATA_BIT4:
	case PS2_DATA_BIT5:
	case PS2_DATA_BIT6:
	case PS2_DATA_BIT7:
		data = byte & BIT(cnt - 1);
		gpiod_set_value(drvdata->gpio_data, data);
		break;
	case PS2_PARITY_BIT:
		/* do odd parity */
		data = !(hweight8(byte) & 1);
		gpiod_set_value(drvdata->gpio_data, data);
		break;
	case PS2_STOP_BIT:
		/* release data line to generate stop bit */
		gpiod_direction_input(drvdata->gpio_data);
		break;
	case PS2_TX_TIMEOUT:
		/* Devices generate one extra clock pulse before sending the
		 * acknowledgment.
		 */
		break;
	case PS2_ACK_BIT:
		gpiod_direction_input(drvdata->gpio_data);
		data = gpiod_get_value(drvdata->gpio_data);
		if (data) {
			dev_warn(drvdata->dev, "TX: received NACK, retry\n");
			goto err;
		}

		drvdata->mode = PS2_MODE_RX;
		complete(&drvdata->tx_done);

		cnt = 1;
		old_jiffies = 0;
		goto end; /* success */
	default:
		/* Probably we missed the stop bit. Therefore we release data
		 * line and try again.
		 */
		gpiod_direction_input(drvdata->gpio_data);
		dev_err(drvdata->dev, "TX: got out of sync with the device\n");
		goto err;
	}

	cnt++;
	goto end; /* success */

err:
	cnt = 1;
	old_jiffies = 0;
	gpiod_direction_input(drvdata->gpio_data);
	__ps2_gpio_write(drvdata->serio, drvdata->tx_byte);
end:
	drvdata->tx_cnt = cnt;
	return IRQ_HANDLED;
}

static irqreturn_t ps2_gpio_irq(int irq, void *dev_id)
{
	struct ps2_gpio_data *drvdata = dev_id;

	return drvdata->mode ? ps2_gpio_irq_tx(drvdata) :
		ps2_gpio_irq_rx(drvdata);
}

static int ps2_gpio_get_props(struct device *dev,
				 struct ps2_gpio_data *drvdata)
{
	drvdata->gpio_data = devm_gpiod_get(dev, "data", GPIOD_IN);
	if (IS_ERR(drvdata->gpio_data)) {
		dev_err(dev, "failed to request data gpio: %ld",
			PTR_ERR(drvdata->gpio_data));
		return PTR_ERR(drvdata->gpio_data);
	}

	drvdata->gpio_clk = devm_gpiod_get(dev, "clk", GPIOD_IN);
	if (IS_ERR(drvdata->gpio_clk)) {
		dev_err(dev, "failed to request clock gpio: %ld",
			PTR_ERR(drvdata->gpio_clk));
		return PTR_ERR(drvdata->gpio_clk);
	}

	drvdata->write_enable = device_property_read_bool(dev,
				"write-enable");

	return 0;
}

static int ps2_gpio_probe(struct platform_device *pdev)
{
	struct ps2_gpio_data *drvdata;
	struct serio *serio;
	struct device *dev = &pdev->dev;
	int error;

	drvdata = devm_kzalloc(dev, sizeof(struct ps2_gpio_data), GFP_KERNEL);
	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
	if (!drvdata || !serio) {
		error = -ENOMEM;
		goto err_free_serio;
	}

	error = ps2_gpio_get_props(dev, drvdata);
	if (error)
		goto err_free_serio;

	if (gpiod_cansleep(drvdata->gpio_data) ||
	    gpiod_cansleep(drvdata->gpio_clk)) {
		dev_err(dev, "GPIO data or clk are connected via slow bus\n");
		error = -EINVAL;
		goto err_free_serio;
	}

	drvdata->irq = platform_get_irq(pdev, 0);
	if (drvdata->irq < 0) {
		error = drvdata->irq;
		goto err_free_serio;
	}

	error = devm_request_irq(dev, drvdata->irq, ps2_gpio_irq,
				 IRQF_NO_THREAD, DRIVER_NAME, drvdata);
	if (error) {
		dev_err(dev, "failed to request irq %d: %d\n",
			drvdata->irq, error);
		goto err_free_serio;
	}

	/* Keep irq disabled until serio->open is called. */
	disable_irq(drvdata->irq);

	serio->id.type = SERIO_8042;
	serio->open = ps2_gpio_open;
	serio->close = ps2_gpio_close;
	/* Write can be enabled in platform/dt data, but possibly it will not
	 * work because of the tough timings.
	 */
	serio->write = drvdata->write_enable ? ps2_gpio_write : NULL;
	serio->port_data = drvdata;
	serio->dev.parent = dev;
	strlcpy(serio->name, dev_name(dev), sizeof(serio->name));
	strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys));

	drvdata->serio = serio;
	drvdata->dev = dev;
	drvdata->mode = PS2_MODE_RX;

	/* Tx count always starts at 1, as the start bit is sent implicitly by
	 * host-to-device communication initialization.
	 */
	drvdata->tx_cnt = 1;

	INIT_DELAYED_WORK(&drvdata->tx_work, ps2_gpio_tx_work_fn);
	init_completion(&drvdata->tx_done);
	mutex_init(&drvdata->tx_mutex);

	serio_register_port(serio);
	platform_set_drvdata(pdev, drvdata);

	return 0;	/* success */

err_free_serio:
	kfree(serio);
	return error;
}

static int ps2_gpio_remove(struct platform_device *pdev)
{
	struct ps2_gpio_data *drvdata = platform_get_drvdata(pdev);

	serio_unregister_port(drvdata->serio);
	return 0;
}

#if defined(CONFIG_OF)
static const struct of_device_id ps2_gpio_match[] = {
	{ .compatible = "ps2-gpio", },
	{ },
};
MODULE_DEVICE_TABLE(of, ps2_gpio_match);
#endif

static struct platform_driver ps2_gpio_driver = {
	.probe		= ps2_gpio_probe,
	.remove		= ps2_gpio_remove,
	.driver = {
		.name = DRIVER_NAME,
		.of_match_table = of_match_ptr(ps2_gpio_match),
	},
};
module_platform_driver(ps2_gpio_driver);

MODULE_AUTHOR("Danilo Krummrich <danilokrummrich@dk-develop.de>");
MODULE_DESCRIPTION("GPIO PS2 driver");
MODULE_LICENSE("GPL v2");