summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
AgeCommit message (Expand)Author
2020-01-27serial: stm32: fix clearing interrupt error flagsFabrice Gasnier
2020-01-27tty: serial: fsl_lpuart: Use appropriate lpuart32_* I/O funcsAndrey Smirnov
2020-01-27serial: stm32: fix a recursive locking in stm32_config_rs485Borut Seljak
2020-01-27serial: stm32: fix wakeup source initializationErwan Le Ray
2020-01-27serial: stm32: Add support of TC bit status checkErwan Le Ray
2020-01-27serial: stm32: fix transmit_chars when tx is stoppedErwan Le Ray
2020-01-27serial: stm32: fix rx data length when parity enabledErwan Le Ray
2020-01-27serial: stm32: fix rx error handlingErwan Le Ray
2020-01-27serial: stm32: fix word length configurationErwan Le Ray
2020-01-17tty: serial: pch_uart: correct usage of dma_unmap_sgPeng Fan
2020-01-17tty: serial: imx: use the sg count from dma_map_sgPeng Fan
2020-01-14tty: link tty and port before configuring it as consoleSudip Mukherjee
2020-01-09tty: serial: msm_serial: Fix lockup for sysrq and oopsLeo Yan
2020-01-04tty/serial: atmel: fix out of range clock divider handlingDavid Engraf
2019-12-13tty: serial: qcom_geni_serial: Fix softlockRyan Case
2019-12-13serial: imx: fix error handling in console_setupStefan Agner
2019-12-13serial: ifx6x60: add missed pm_runtime_disableChuhong Yuan
2019-12-13serial: serial_core: Perform NULL checks for break_ctl opsJiangfeng Xiao
2019-12-13serial: pl011: Fix DMA ->flush_buffer()Vincent Whitchurch
2019-12-13tty: serial: msm_serial: Fix flow controlJeffrey Hugo
2019-12-13tty: serial: fsl_lpuart: use the sg count from dma_map_sgPeng Fan
2019-12-05serial: 8250: Fix serial8250 initialization crashHe Zhe
2019-12-05serial: max310x: Fix tx_empty() callbackAlexander Shiyan
2019-12-05serial: 8250: Rate limit serial port rx interrupts during input overrunsDarwin Dingel
2019-12-05serial: sh-sci: Fix crash in rx_timer_fn() on PIO fallbackGeert Uytterhoeven
2019-11-20tty: serial: qcom_geni_serial: Fix serial when not used as consoleDouglas Anderson
2019-11-20serial: mxs-auart: Fix potential infinite loopAnton Vasilyev
2019-11-20serial: samsung: Enable baud clock for UART reset procedure in resumeMarek Szyprowski
2019-11-20serial: uartps: Fix suspend functionalityNava kishore Manne
2019-11-108250-men-mcb: fix error checking when get_num_ports returns -ENODEVColin Ian King
2019-11-06serial: mctrl_gpio: Check for NULL pointerAdam Ford
2019-11-06tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'Christophe JAILLET
2019-11-06sc16is7xx: Fix for "Unexpected interrupt: 8"Phil Elwell
2019-10-17serial: uartlite: fix exit path null pointerRandy Dunlap
2019-09-21tty/serial: atmel: reschedule TX after RX was startedRazvan Stefanescu
2019-09-21serial: sprd: correct the wrong sequence of argumentsChunyan Zhang
2019-07-31serial: sh-sci: Fix TX DMA buffer flushing and workqueue racesGeert Uytterhoeven
2019-07-31serial: sh-sci: Terminate TX DMA during buffer flushingGeert Uytterhoeven
2019-07-31serial: mctrl_gpio: Check if GPIO property exisits before requesting itStefan Roese
2019-07-31tty: serial_core: Set port active bit in uart_port_activateSerge Semin
2019-07-31serial: imx: fix locking in set_termios()Sergey Organov
2019-07-31serial: 8250: Fix TX interrupt handling conditionRautkoski Kimmo EXT
2019-07-31tty: serial: msm_serial: avoid system lockup conditionJorge Ramirez-Ortiz
2019-07-31tty/serial: digicolor: Fix digicolor-usart already registered warningKefeng Wang
2019-07-31tty: serial: cpm_uart - fix init when SMC is relocatedChristophe Leroy
2019-07-31tty: max310x: Fix invalid baudrate divisors calculatorSerge Semin
2019-07-14Revert "serial: 8250: Don't service RX FIFO if interrupts are disabled"Oliver Barta
2019-07-10sc16is7xx: move label 'err_spi' to correct sectionGuoqing Jiang
2019-06-22sunhv: Fix device naming inconsistency between sunhv_console and sunhv_regJohn Paul Adrian Glaubitz
2019-06-15dmaengine: idma64: Use actual device for DMA transfersAndy Shevchenko
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-22 03:54:25 +0000