Age | Commit message (Collapse) | Author |
|
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
There's no change to dtbs_install as the flat structure is maintained on
install.
The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)
The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The Flash Interface Unit (FIU) should have a reference to the Shared
Memory controller (SHM) so that flash access from the host (x86 computer
managed by the WPCM450 BMC) can be blocked during flash access by the
FIU driver.
Fixes: 38abcb0d68767 ("ARM: dts: wpcm450: Add FIU SPI controller node")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20230129112611.1176517-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230201044158.962417-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The watchdog timer is always usable, regardless of board design, so
there is no point in marking the watchdog device as disabled-by-default
in nuvoton-wpcm450.dtsi.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220609214830.127003-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This declares the clock controller and the necessary 48 Mhz reference
clock in the WPCM450 device. Switching devices over to the clock
controller is intentionally done in a separate patch to give time for
the clock controller driver to land.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20221104161850.2889894-5-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add the SPI controller (FIU, Flash Interface Unit) to the WPCM450
devicetree, according to the newly defined binding, as well as the SHM
(shared memory interface) syscon.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20221105185911.1547847-6-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
UART0 always uses the same pins, so lets add the pinctrl information to
the common devicetree for WPCM450.
UART1 has different connection options, so I'm not adding the pinctrl
properties there.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220129115228.2257310-10-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
As done in nuvoton-common-npcm7xx.dtsi, this patch adds pinmux nodes for
all pin functions to nuvoton-wpcm450.dtsi.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220129115228.2257310-8-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This patch adds the pin controller and GPIO banks to the devicetree for the
WPCM450 SoC.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220129115228.2257310-7-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The Global Control Registers (GCR) are a block of registers in Nuvoton
SoCs that expose misc functionality such as chip model and version
information or pinmux settings.
This patch adds a GCR node to nuvoton-wpcm450.dtsi in preparation for
enabling pinctrl on this SoC.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220129115228.2257310-4-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The WPCM450 is an older BMC SoC in the Nuvoton NPCM family, originally
marketed as Winbond WPCM450.
This patch adds a devicetree with basic functionality.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210406120921.2484986-9-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|