Age | Commit message (Collapse) | Author |
|
Add compatible string for Qualcomm QMP Super Speed (SS) UNI PHY found
in X1E80100.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231122-phy-qualcomm-usb3-uniphy-x1e80100-v3-1-273814c300f8@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the X1E80100 compatible to the list.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231201-x1e80100-phy-combo-v1-1-6938ec41f3ac@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the X1E80100 compatible to the list of supported PHYs.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231122-phy-qualcomm-eusb2-x1e80100-v2-1-3ba9a8e5ade4@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Due to some old SoCs with shared t-phy between usb3 and pcie only support
force-mode switch, and shared and non-shared t-phy may exist at the same
time on a SoC, can't use compatible to distinguish between shared and
non-shared t-phy, add a property to supported it.
Currently, only support switch from default pcie mode to usb3 mode.
But now prefer to use "mediatek,syscon-type" on new SoC as far as possible.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231211025624.28991-1-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix the path to bindings header in description.
Fixes: e1c4c5436b4a ("dt-bindings: phy: qcom,qmp-usb3-dp: fix sc8280xp binding")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231218130553.45893-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the compatible string for MediaTek MT8195 SoC, using the same MIPI
D-PHY block as the MT8183.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231123133749.2030661-3-mwalle@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
and example
The amlogic,g12a-mipi-dphy-analog is a feature of the simple-mfd
amlogic,meson-axg-hhi-sysctrl system control register zone which is an
intermixed registers zone, thus it's very hard to define clear ranges for
each SoC controlled features even if possible.
The amlogic,g12a-mipi-dphy-analog was wrongly documented as an independent
register range, which is not the reality, thus fix the bindings by dropping
the reg property now it's referred from amlogic,meson-gx-hhi-sysctrl.yaml
and documented as a subnode of amlogic,meson-axg-hhi-sysctrl.
Also drop the unnecessary example, the top level bindings example should
be enough.
Fixes: 76ab79f9726c ("dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231124-amlogic-v6-4-upstream-dsi-ccf-vim3-v9-4-95256ed139e6@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
syscon and drop example
Since this bindings is referred from amlogic,meson-gx-hhi-sysctrl.yaml, drop the now
useless description about the parent node and also drop the unnecessary example.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231124-amlogic-v6-4-upstream-dsi-ccf-vim3-v9-3-95256ed139e6@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document the Synopsys eUSB2 PHY on the SM8650 Platform by using
the SM8550 as fallback.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-phy-v2-4-a543a4c4b491@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
USB/DP Combo PHY
Document the QMP USB/DP Combo PHY on the SM8650 Platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-phy-v2-3-a543a4c4b491@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document the QMP PCIe PHYs on the SM8650 Platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-phy-v2-2-a543a4c4b491@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document the QMP UFS PHY on the SM8650 Platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-phy-v2-1-a543a4c4b491@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull generic phy updates from Vinod Koul:
"New Support:
- Qualcomm sa8775p qmp-pcie, IPQ5018, and SC7280 qmp-ufs support
- Mediatek MT8188 support
Updates:
- Device tree device_get_match_data() usage and dropping
of_match_device() calls
- Qualcomm qmp usb and combo phy updates for v6 register layout
- Qualcomm eusb2-repeater updates for tuning overrides, regmap fields
- STih407 usb binding and ralink usb-phy yaml conversion
- renesas r8a779f0 serdes init sequencing updates"
* tag 'phy-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (32 commits)
phy: Remove duplicated include in phy-ralink-usb.c
phy: Kconfig: Select GENERIC_PHY for GENERIC_PHY_MIPI_DPHY
phy: qcom-qmp-pcie: add endpoint support for sa8775p
dt-bindings: phy: ralink-usb-phy: convert to dtschema
dt-bindings: phy: Convert PXA1928 USB/HSIC PHY to DT schema
phy: Drop unnecessary of_match_device() calls
phy: rockchip-inno-usb2: Drop unnecessary DT includes
phy: Use device_get_match_data()
phy: realtek: Replace of_device.h with explicit includes
phy: renesas: r8a779f0-ether-serdes: Add .exit() ops
phy: renesas: r8a779f0-ether-serdes: Reset in .init()
phy: qcom-qmp-combo: use v6 registers in v6 regs layout
phy: qcom-qmp-usb: move PCS v6 register to the proper header
phy: qcom-qmp-combo: fix the prefix for the PCS_USB v6 registers
phy: sun4i-usb: update array size
phy: qualcomm: phy-qcom-eusb2-repeater: Add tuning overrides
phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs
phy: qualcomm: phy-qcom-eusb2-repeater: Use regmap_fields
dt-bindings: phy: qcom,snps-eusb2-repeater: Add magic tuning overrides
dt-bindings: phy: Add compatible for Mediatek MT8188
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for
new hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
spi, and i2c drivers for that type of device (all acked by the
respective subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
usb: gadget: uvc: Add missing initialization of ssp config descriptor
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
usb: raw-gadget: report suspend, resume, reset, and disconnect events
usb: raw-gadget: don't disable device if usb_ep_queue fails
usb: raw-gadget: properly handle interrupted requests
usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
usb: gadget: aspeed_udc: Convert to platform remove callback returning void
dt-bindings: usb: fsa4480: Add compatible for OCP96011
usb: typec: fsa4480: Add support to swap SBU orientation
dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
thunderbolt: Fix one kernel-doc comment
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
usb: core: Remove duplicated check in usb_hub_create_port_device
usb: typec: tcpm: Add additional checks for contaminant
arm64: dts: rockchip: rk3588s: Add USB3 host controller
usb: dwc3: add optional PHY interface clocks
dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
...
|
|
Convert the ralink-usb-phy bindings to DT schema.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231022163006.803800-1-sergio.paracuellos@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert the binding for the Marvell PXA1928 USB and HSIC PHYs from TXT
to DT schema.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231004-pxa1928-usb-yaml-v3-1-150c9ef3ab9d@skole.hr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Merge fixes into next as qmp phy patches on list depend on it
|
|
Add dt-bindings for USB3 PHY found on Qualcomm SDX75.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1695359525-4548-3-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a dt-bindings compatible string for the SDX75 SoC that
uses Synopsis eUSB2 PHY.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1695359525-4548-2-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The EUSB2 repeater requires some alterations to its init sequence,
depending on board design.
Add support for making the necessary changes to that sequence to make USB
functional on SM8550-based Xperia 1 V.
They all have lackluster description due to lack of information.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-1-7d8c893d93f6@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add dt-binding documentation of dsi-phy for MediaTek MT8188 SoC.
Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230908075310.17825-1-shuijing.li@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
IPQ5332 qcom,m31 phy driver can support IPQ5018.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Link: https://lore.kernel.org/r/20230904063635.24975-2-quic_nsekar@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert the st,stih407-usb2-phy binding to DT schema format.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230823132224.111326-1-rgallaispou@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix the 'reg is too long' warning caused by me adding 64-bit address and
size to the example, while default being 32-bit (cell size equal to 1).
Reported-by: Rob Herring <robh+dt@kernel.org>
Fixes: 505fb2541678 ("dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230823181728.3082946-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
qcom,sc8280xp-qmp-usb3-uni-phy.yaml
Migrate legacy bindings (described in qcom,msm8996-qmp-usb3-phy.yaml)
to qcom,sc8280xp-qmp-usb3-uni-phy.yaml. This removes a need to declare
the child PHY node or split resource regions.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230824211952.1397699-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document the QMP UFS PHY compatible for SC7280.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230918205037.25658-2-quic_nitirawa@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"As usual a couple of new drivers, a bunch of new device support and
few updates to existing drivers
New Support:
- Starfive dphy rx, JH7110 usb and pcie support
- Rockchip rv1126 inno-dsi phy, rk3588 usb and pcie support
- Qualcomm sa8775p PCIe support, M31 USB PHY driver
- Samsung Exynos850 usb support
Updates:
- Mediatek dsi driver clock updates
- Qualcomm sm8150 combo phy with reworking of qmp pcie driver
- Xilinx zynqmp runtime PM support"
* tag 'phy-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (83 commits)
phy: exynos5-usbdrd: Add Exynos850 support
phy: exynos5-usbdrd: Add 26MHz ref clk support
phy: exynos5-usbdrd: Make it possible to pass custom phy ops
dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos850 support
phy: qcom-qmp-combo: fix clock probing
phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYs
phy: qcom-qmp-pcie: populate offsets configuration
phy: qcom-qmp-pcie: simplify clock handling
phy: qcom-qmp-pcie: keep offset tables sorted
phy: qcom-qmp-pcie: drop ln_shrd from v5_20 config
dt-bindings: phy: qcom,qmp-pcie: describe SM8150 PCIe PHYs
dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml
phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed
phy: qcom: Introduce M31 USB PHY driver
dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
phy: rockchip: inno-dsidphy: Add rv1126 support
dt-bindings: phy: rockchip-inno-dsidphy: Document rv1126
dt-bindings: phy: mediatek,tphy: allow simple nodename pattern
phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warning
phy: marvell pxa-usb: fix Wvoid-pointer-to-enum-cast warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt / PHY driver updates from Greg KH:
"Here is the big set of USB, Thunderbolt, and PHY driver updates for
6.6-rc1. Included in here are:
- PHY driver additions and cleanups
- Thunderbolt minor additions and fixes
- USB MIDI 2 gadget support added
- dwc3 driver updates and additions
- Removal of some old USB wireless code that was missed when that
codebase was originally removed a few years ago, cleaning up some
core USB code paths
- USB core potential use-after-free fixes that syzbot from different
people/groups keeps tripping over
- typec updates and additions
- gadget fixes and cleanups
- loads of smaller USB core and driver cleanups all over the place
Full details are in the shortlog. All of these have been in linux-next
for a while with no reported problems"
* tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
platform/chrome: cros_ec_typec: Configure Retimer cable type
tcpm: Avoid soft reset when partner does not support get_status
usb: typec: tcpm: reset counter when enter into unattached state after try role
usb: typec: tcpm: set initial svdm version based on pd revision
USB: serial: option: add FOXCONN T99W368/T99W373 product
USB: serial: option: add Quectel EM05G variant (0x030e)
usb: dwc2: add pci_device_id driver_data parse support
usb: gadget: remove max support speed info in bind operation
usb: gadget: composite: cleanup function config_ep_by_speed_and_alt()
usb: gadget: config: remove max speed check in usb_assign_descriptors()
usb: gadget: unconditionally allocate hs/ss descriptor in bind operation
usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()
usb: gadget: add a inline function gether_bitrate()
usb: gadget: use working speed to calcaulate network bitrate and qlen
dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support
usb: dwc3: exynos: Add support for Exynos850 variant
usb: gadget: udc-xilinx: fix incorrect type in assignment warning
usb: gadget: udc-xilinx: fix cast from restricted __le16 warning
usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning
USB: dwc2: hande irq on dead controller correctly
...
|
|
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Correct also the format // -> .* in few Allwinner binding headers as
pointed out by checkpatch:
WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Document Exynos850 compatible. USB 2.0 DRD PHY on Exynos850 has two
clocks (ref and phy), which is already described in bindings.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230819031731.22618-3-semen.protsenko@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Descrbie two PCIe PHYs found on the Qualcomm SM8150 platform, single
lane and two lanes Gen3 PHYs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230820142035.89903-3-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
qcom,sc8280xp-qmp-pcie-phy.yaml
Migrate legacy bindings (described in qcom,ipq8074-qmp-pcie-phy.yaml)
to qcom,sc8280xp-qmp-pcie-phy.yaml. This removes a need to declare
the child PHY node or split resource regions.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230820142035.89903-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document the M31 USB2 phy present in IPQ5332.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/44a31cf0361df8db527684c7fb3b38e6ece950c1.1691999761.git.quic_varada@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document a compatible string for the rv1126 dsi-dphy.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230731110012.2913742-4-jagan@edgeble.ai
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The pattern for the nodename only allows t-phy@... , however, for the case
when the t-phy has no `reg` and only `ranges` (basically when the t-phy
is just a parent node), dtc will throw this warning:
Warning (unit_address_vs_reg): /t-phy@1a243000: node has a unit name, but no reg or ranges property
For a node like this:
sata_phy: t-phy@1a243000 {
ranges;
sata_port: sata-phy@1a243000 {
reg = <0 0x1a243000 0 0x0100>;
};
};
it is normal that the parent node 't-phy' would be without any address, as in:
sata_phy: t-phy {
ranges;
sata_port: sata-phy@1a243000 {
reg = <0 0x1a243000 0 0x0100>;
};
};
because being just a holder it does not have its own reg.
However the binding does not allow such a name for the t-phy, so with this
patch, making the `@[0-9a-f]+` part optional, such node is possible.
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230814093931.9298-1-eugen.hristev@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix typos in Documentation/devicetree/bindings. The changes are in
descriptions or comments where they shouldn't affect functionality.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add a dt-bindings compatible string for the Qualcomm's PM7550BA PMIC.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1691415534-31820-2-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document the USB PHY bindings for Realtek SoCs.
Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB
controller and using USB 3.0 PHY transceiver.
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230725033318.8361-5-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the USB PHY bindings for Realtek SoCs.
Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB
controller and using USB 2.0 PHY transceiver.
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230725033318.8361-4-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
qcom,sc8280xp-qmp-usb43dp-phy.yaml
Migrate legacy bindings (described in qcom,sc7180-qmp-usb3-dp-phy.yaml)
to qcom,sc8280xp-qmp-usb43dp-phy.yaml. This removes a need to declare
the child PHY node or split resource regions.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711120916.4165894-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
StarFive SoCs like the jh7110 use a MIPI D-PHY RX controller based on
a M31 IP. Add a binding for it.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718070803.16660-2-changhuang.liang@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When the RK3568 PCIe v3 PHY supported has been upstreamed, RK3588
support was included, but the DT binding does not reflect this.
This adds the missing bits.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230717173512.65169-2-sebastian.reichel@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add devicetree YAML binding for Qualcomm QMP PCIe PHY
for SA8775p platform.
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Link: https://lore.kernel.org/r/1689311319-22054-3-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Migrate legacy bindings (described in qcom,msm8996-qmp-ufs-phy.yaml)
to qcom,sc8280xp-qmp-ufs-phy.yaml. This removes a need to declare
the child PHY node or split resource regions.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711145153.4167820-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add StarFive JH7110 SoC PCIe 2.0 PHY dt-binding.
PCIe PHY0 (phy@10210000) can be used as USB 3.0 PHY.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230629075115.11934-3-minda.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add StarFive JH7110 SoC USB 2.0 PHY dt-binding.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230629075115.11934-2-minda.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The qcom,msm8996-qmp-usb3-phy.yaml defines bindings for several PHYs
which predate USB -> USB+DP migration. Now as sm8150 has been migrated,
drop the legacy bindings completely. No device trees use them anymore.
Newer USB+DP bindings should use combo bindings from the beginning.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230531023415.1209301-5-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add bindings for sm8150 USB+DP PHY. These bindings follow the older
style as this is a quick conversion to simplify further driver cleanup.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230531023415.1209301-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add compatible for the USB2 phy in the Rockchip RK3588 SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230522170324.61349-2-sebastian.reichel@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support:
- Debugfs support for phy core and mediatek driver
- Hisilicon inno-usb2-phy driver supporting Hi3798MV100
- Qualcomm SGMII SerDes PHY driver, SM6115 & QCM2290 QMP-USB support,
SA8775P USB PHY & USB3 UNI support, QUSB2 support for IPQ9574,
IPQ9574 USB3 PHY
UpdatesL
- Sparx5 serdes phy power optimzation
- cadence salvo usb properties and updates and torrent DP with PCIe &
USB support
- Yaml conversion for Broadcom kona USB bindings and MXS USB binding"
* tag 'phy-for-6.5_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (67 commits)
dt-bindings: phy: brcm,brcmstb-usb-phy: Fix error in "compatible" conditional schema
dt-bindings: phy: mixel,mipi-dsi-phy: Remove assigned-clock* properties
dt-bindings: phy: intel,combo-phy: restrict node name suffixes
dt-bindings: phy: qcom,usb-hs-phy: Add compatible
phy: tegra: xusb: check return value of devm_kzalloc()
phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550
phy: qcom: add the SGMII SerDes PHY driver
dt-bindings: phy: describe the Qualcomm SGMII PHY
phy: qualcomm: fix indentation in Makefile
phy: usb: suppress OC condition for 7439b2
phy: usb: Turn off phy when port is in suspend
phy: tegra: xusb: Clear the driver reference in usb-phy dev
dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
dt-bindings: phy: mxs-usb-phy: convert to DT schema format
dt-bindings: phy: qcom,qmp-usb: fix bindings error
dt-bindings: phy: qcom,qmp-ufs: fix the sc8180x regs
dt-bindings: phy: qcom,qmp-pcie: fix the sc8180x regs
phy: mediatek: tphy: add debugfs files
phy: core: add debugfs files
phy: fsl-imx8mp-usb: add support for phy tuning
...
|