diff options
Diffstat (limited to 'drivers/usb/core')
-rw-r--r-- | drivers/usb/core/hub.c | 46 | ||||
-rw-r--r-- | drivers/usb/core/hub.h | 2 | ||||
-rw-r--r-- | drivers/usb/core/quirks.c | 7 | ||||
-rw-r--r-- | drivers/usb/core/sysfs.c | 5 | ||||
-rw-r--r-- | drivers/usb/core/usb.c | 76 |
5 files changed, 123 insertions, 13 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d1a7f22cb3a9..898df2e43945 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -40,6 +40,9 @@ #define USB_PRODUCT_USB5534B 0x5534 #define USB_VENDOR_CYPRESS 0x04b4 #define USB_PRODUCT_CY7C65632 0x6570 +#define USB_VENDOR_TEXAS_INSTRUMENTS 0x0451 +#define USB_PRODUCT_TUSB8041_USB3 0x8140 +#define USB_PRODUCT_TUSB8041_USB2 0x8142 #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01 #define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02 @@ -144,6 +147,10 @@ int usb_device_supports_lpm(struct usb_device *udev) if (udev->quirks & USB_QUIRK_NO_LPM) return 0; + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return 0; + /* USB 2.1 (and greater) devices indicate LPM support through * their USB 2.0 Extended Capabilities BOS descriptor. */ @@ -320,6 +327,10 @@ static void usb_set_lpm_parameters(struct usb_device *udev) if (!udev->lpm_capable || udev->speed < USB_SPEED_SUPER) return; + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return; + hub = usb_hub_to_struct_hub(udev->parent); /* It doesn't take time to transition the roothub into U0, since it * doesn't have an upstream link. @@ -2342,9 +2353,8 @@ static int usb_enumerate_device_otg(struct usb_device *udev) * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * - * This is only called by usb_new_device() and usb_authorize_device() - * and FIXME -- all comments that apply to them apply here wrt to - * environment. + * This is only called by usb_new_device() -- all comments that apply there + * apply here wrt to environment. * * If the device is WUSB and not authorized, we don't attempt to read * the string descriptors, as they will be errored out by the device @@ -2642,7 +2652,8 @@ out_authorized: } /* - * Return 1 if port speed is SuperSpeedPlus, 0 otherwise + * Return 1 if port speed is SuperSpeedPlus, 0 otherwise or if the + * capability couldn't be checked. * check it from the link protocol field of the current speed ID attribute. * current speed ID is got from ext port status request. Sublink speed attribute * table is returned with the hub BOS SSP device capability descriptor @@ -2652,8 +2663,12 @@ static int port_speed_is_ssp(struct usb_device *hdev, int speed_id) int ssa_count; u32 ss_attr; int i; - struct usb_ssp_cap_descriptor *ssp_cap = hdev->bos->ssp_cap; + struct usb_ssp_cap_descriptor *ssp_cap; + if (!hdev->bos) + return 0; + + ssp_cap = hdev->bos->ssp_cap; if (!ssp_cap) return 0; @@ -4055,8 +4070,15 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { int timeout, ret; - __u8 u1_mel = udev->bos->ss_cap->bU1devExitLat; - __le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat; + __u8 u1_mel; + __le16 u2_mel; + + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return; + + u1_mel = udev->bos->ss_cap->bU1devExitLat; + u2_mel = udev->bos->ss_cap->bU2DevExitLat; /* If the device says it doesn't have *any* exit latency to come out of * U1 or U2, it's probably lying. Assume it doesn't implement that link @@ -5515,6 +5537,16 @@ static const struct usb_device_id hub_id_table[] = { .idVendor = USB_VENDOR_GENESYS_LOGIC, .bInterfaceClass = USB_CLASS_HUB, .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT, + .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS, + .idProduct = USB_PRODUCT_TUSB8041_USB2, + .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT, + .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS, + .idProduct = USB_PRODUCT_TUSB8041_USB3, + .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND}, { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS, .bDeviceClass = USB_CLASS_HUB}, { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS, diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index df3aa0b69188..d1845e5ff700 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -139,7 +139,7 @@ static inline int hub_is_superspeedplus(struct usb_device *hdev) { return (hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS && le16_to_cpu(hdev->descriptor.bcdUSB) >= 0x0310 && - hdev->bos->ssp_cap); + hdev->bos && hdev->bos->ssp_cap); } static inline unsigned hub_power_on_good_delay(struct usb_hub *hub) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 35a11f7bcb65..48cda9b7a8f2 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -437,6 +437,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* novation SoundControl XL */ { USB_DEVICE(0x1235, 0x0061), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Focusrite Scarlett Solo USB */ + { USB_DEVICE(0x1235, 0x8211), .driver_info = + USB_QUIRK_DISCONNECT_SUSPEND }, + /* Huawei 4G LTE module */ { USB_DEVICE(0x12d1, 0x15bb), .driver_info = USB_QUIRK_DISCONNECT_SUSPEND }, @@ -527,6 +531,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* DJI CineSSD */ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM }, + /* Alcor Link AK9563 SC Reader used in 2022 Lenovo ThinkPads */ + { USB_DEVICE(0x2ce3, 0x9563), .driver_info = USB_QUIRK_NO_LPM }, + /* DELL USB GEN2 */ { USB_DEVICE(0x413c, 0xb062), .driver_info = USB_QUIRK_NO_LPM | USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index b93b18ba89df..7e88fdfe3cf5 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -888,11 +888,7 @@ read_descriptors(struct file *filp, struct kobject *kobj, size_t srclen, n; int cfgno; void *src; - int retval; - retval = usb_lock_device_interruptible(udev); - if (retval < 0) - return -EINTR; /* The binary attribute begins with the device descriptor. * Following that are the raw descriptor entries for all the * configurations (config plus subsidiary descriptors). @@ -917,7 +913,6 @@ read_descriptors(struct file *filp, struct kobject *kobj, off -= srclen; } } - usb_unlock_device(udev); return count - nleft; } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 4ebfbd737905..c369920b4854 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -210,6 +210,82 @@ int usb_find_common_endpoints_reverse(struct usb_host_interface *alt, EXPORT_SYMBOL_GPL(usb_find_common_endpoints_reverse); /** + * usb_find_endpoint() - Given an endpoint address, search for the endpoint's + * usb_host_endpoint structure in an interface's current altsetting. + * @intf: the interface whose current altsetting should be searched + * @ep_addr: the endpoint address (number and direction) to find + * + * Search the altsetting's list of endpoints for one with the specified address. + * + * Return: Pointer to the usb_host_endpoint if found, %NULL otherwise. + */ +static const struct usb_host_endpoint *usb_find_endpoint( + const struct usb_interface *intf, unsigned int ep_addr) +{ + int n; + const struct usb_host_endpoint *ep; + + n = intf->cur_altsetting->desc.bNumEndpoints; + ep = intf->cur_altsetting->endpoint; + for (; n > 0; (--n, ++ep)) { + if (ep->desc.bEndpointAddress == ep_addr) + return ep; + } + return NULL; +} + +/** + * usb_check_bulk_endpoints - Check whether an interface's current altsetting + * contains a set of bulk endpoints with the given addresses. + * @intf: the interface whose current altsetting should be searched + * @ep_addrs: 0-terminated array of the endpoint addresses (number and + * direction) to look for + * + * Search for endpoints with the specified addresses and check their types. + * + * Return: %true if all the endpoints are found and are bulk, %false otherwise. + */ +bool usb_check_bulk_endpoints( + const struct usb_interface *intf, const u8 *ep_addrs) +{ + const struct usb_host_endpoint *ep; + + for (; *ep_addrs; ++ep_addrs) { + ep = usb_find_endpoint(intf, *ep_addrs); + if (!ep || !usb_endpoint_xfer_bulk(&ep->desc)) + return false; + } + return true; +} +EXPORT_SYMBOL_GPL(usb_check_bulk_endpoints); + +/** + * usb_check_int_endpoints - Check whether an interface's current altsetting + * contains a set of interrupt endpoints with the given addresses. + * @intf: the interface whose current altsetting should be searched + * @ep_addrs: 0-terminated array of the endpoint addresses (number and + * direction) to look for + * + * Search for endpoints with the specified addresses and check their types. + * + * Return: %true if all the endpoints are found and are interrupt, + * %false otherwise. + */ +bool usb_check_int_endpoints( + const struct usb_interface *intf, const u8 *ep_addrs) +{ + const struct usb_host_endpoint *ep; + + for (; *ep_addrs; ++ep_addrs) { + ep = usb_find_endpoint(intf, *ep_addrs); + if (!ep || !usb_endpoint_xfer_int(&ep->desc)) + return false; + } + return true; +} +EXPORT_SYMBOL_GPL(usb_check_int_endpoints); + +/** * usb_find_alt_setting() - Given a configuration, find the alternate setting * for the given interface. * @config: the configuration to search (not necessarily the current config). |