diff options
Diffstat (limited to 'drivers/usb/core/hub.c')
-rw-r--r-- | drivers/usb/core/hub.c | 46 |
1 files changed, 39 insertions, 7 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d1a7f22cb3a9..898df2e43945 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -40,6 +40,9 @@ #define USB_PRODUCT_USB5534B 0x5534 #define USB_VENDOR_CYPRESS 0x04b4 #define USB_PRODUCT_CY7C65632 0x6570 +#define USB_VENDOR_TEXAS_INSTRUMENTS 0x0451 +#define USB_PRODUCT_TUSB8041_USB3 0x8140 +#define USB_PRODUCT_TUSB8041_USB2 0x8142 #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01 #define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02 @@ -144,6 +147,10 @@ int usb_device_supports_lpm(struct usb_device *udev) if (udev->quirks & USB_QUIRK_NO_LPM) return 0; + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return 0; + /* USB 2.1 (and greater) devices indicate LPM support through * their USB 2.0 Extended Capabilities BOS descriptor. */ @@ -320,6 +327,10 @@ static void usb_set_lpm_parameters(struct usb_device *udev) if (!udev->lpm_capable || udev->speed < USB_SPEED_SUPER) return; + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return; + hub = usb_hub_to_struct_hub(udev->parent); /* It doesn't take time to transition the roothub into U0, since it * doesn't have an upstream link. @@ -2342,9 +2353,8 @@ static int usb_enumerate_device_otg(struct usb_device *udev) * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * - * This is only called by usb_new_device() and usb_authorize_device() - * and FIXME -- all comments that apply to them apply here wrt to - * environment. + * This is only called by usb_new_device() -- all comments that apply there + * apply here wrt to environment. * * If the device is WUSB and not authorized, we don't attempt to read * the string descriptors, as they will be errored out by the device @@ -2642,7 +2652,8 @@ out_authorized: } /* - * Return 1 if port speed is SuperSpeedPlus, 0 otherwise + * Return 1 if port speed is SuperSpeedPlus, 0 otherwise or if the + * capability couldn't be checked. * check it from the link protocol field of the current speed ID attribute. * current speed ID is got from ext port status request. Sublink speed attribute * table is returned with the hub BOS SSP device capability descriptor @@ -2652,8 +2663,12 @@ static int port_speed_is_ssp(struct usb_device *hdev, int speed_id) int ssa_count; u32 ss_attr; int i; - struct usb_ssp_cap_descriptor *ssp_cap = hdev->bos->ssp_cap; + struct usb_ssp_cap_descriptor *ssp_cap; + if (!hdev->bos) + return 0; + + ssp_cap = hdev->bos->ssp_cap; if (!ssp_cap) return 0; @@ -4055,8 +4070,15 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { int timeout, ret; - __u8 u1_mel = udev->bos->ss_cap->bU1devExitLat; - __le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat; + __u8 u1_mel; + __le16 u2_mel; + + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return; + + u1_mel = udev->bos->ss_cap->bU1devExitLat; + u2_mel = udev->bos->ss_cap->bU2DevExitLat; /* If the device says it doesn't have *any* exit latency to come out of * U1 or U2, it's probably lying. Assume it doesn't implement that link @@ -5515,6 +5537,16 @@ static const struct usb_device_id hub_id_table[] = { .idVendor = USB_VENDOR_GENESYS_LOGIC, .bInterfaceClass = USB_CLASS_HUB, .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT, + .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS, + .idProduct = USB_PRODUCT_TUSB8041_USB2, + .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT, + .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS, + .idProduct = USB_PRODUCT_TUSB8041_USB3, + .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND}, { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS, .bDeviceClass = USB_CLASS_HUB}, { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS, |