diff options
Diffstat (limited to 'drivers/i2c/busses')
| -rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 20 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-imx-lpi2c.c | 10 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-ismt.c | 3 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-omap.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-pxa-pci.c | 10 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-rk3x.c | 46 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-s3c2410.c | 40 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-sprd.c | 6 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-stm32f7.c | 9 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-sun6i-p2wi.c | 5 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-xgene-slimpro.c | 3 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-xiic.c | 39 |
12 files changed, 115 insertions, 78 deletions
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index fb0ddaad87d2..c18b899e510e 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -712,15 +712,11 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, return i801_check_post(priv, status); } - for (i = 1; i <= len; i++) { - if (i == len && read_write == I2C_SMBUS_READ) - smbcmd |= SMBHSTCNT_LAST_BYTE; - outb_p(smbcmd, SMBHSTCNT(priv)); - - if (i == 1) - outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START, - SMBHSTCNT(priv)); + if (len == 1 && read_write == I2C_SMBUS_READ) + smbcmd |= SMBHSTCNT_LAST_BYTE; + outb_p(smbcmd | SMBHSTCNT_START, SMBHSTCNT(priv)); + for (i = 1; i <= len; i++) { status = i801_wait_byte_done(priv); if (status) goto exit; @@ -743,9 +739,12 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, data->block[0] = len; } - /* Retrieve/store value in SMBBLKDAT */ - if (read_write == I2C_SMBUS_READ) + if (read_write == I2C_SMBUS_READ) { data->block[i] = inb_p(SMBBLKDAT(priv)); + if (i == len - 1) + outb_p(smbcmd | SMBHSTCNT_LAST_BYTE, SMBHSTCNT(priv)); + } + if (read_write == I2C_SMBUS_WRITE && i+1 <= len) outb_p(data->block[i+1], SMBBLKDAT(priv)); @@ -1679,6 +1678,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) "SMBus I801 adapter at %04lx", priv->smba); err = i2c_add_adapter(&priv->adapter); if (err) { + platform_device_unregister(priv->tco_pdev); i801_acpi_remove(priv); return err; } diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c index 06c4c767af32..a4f90796032b 100644 --- a/drivers/i2c/busses/i2c-imx-lpi2c.c +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c @@ -206,8 +206,8 @@ static void lpi2c_imx_stop(struct lpi2c_imx_struct *lpi2c_imx) /* CLKLO = I2C_CLK_RATIO * CLKHI, SETHOLD = CLKHI, DATAVD = CLKHI/2 */ static int lpi2c_imx_config(struct lpi2c_imx_struct *lpi2c_imx) { - u8 prescale, filt, sethold, clkhi, clklo, datavd; - unsigned int clk_rate, clk_cycle; + u8 prescale, filt, sethold, datavd; + unsigned int clk_rate, clk_cycle, clkhi, clklo; enum lpi2c_imx_pincfg pincfg; unsigned int temp; @@ -468,6 +468,8 @@ static int lpi2c_imx_xfer(struct i2c_adapter *adapter, if (num == 1 && msgs[0].len == 0) goto stop; + lpi2c_imx->rx_buf = NULL; + lpi2c_imx->tx_buf = NULL; lpi2c_imx->delivered = 0; lpi2c_imx->msglen = msgs[i].len; init_completion(&lpi2c_imx->complete); @@ -508,10 +510,14 @@ disable: static irqreturn_t lpi2c_imx_isr(int irq, void *dev_id) { struct lpi2c_imx_struct *lpi2c_imx = dev_id; + unsigned int enabled; unsigned int temp; + enabled = readl(lpi2c_imx->base + LPI2C_MIER); + lpi2c_imx_intctrl(lpi2c_imx, 0); temp = readl(lpi2c_imx->base + LPI2C_MSR); + temp &= enabled; if (temp & MSR_RDF) lpi2c_imx_read_rxfifo(lpi2c_imx); diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index 80796061102f..9f5915d5f7e7 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -504,6 +504,9 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr, if (read_write == I2C_SMBUS_WRITE) { /* Block Write */ dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA: WRITE\n"); + if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX) + return -EINVAL; + dma_size = data->block[0] + 1; dma_direction = DMA_TO_DEVICE; desc->wr_len_cmd = dma_size; diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index cd9c65f3d404..11321ad482a3 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1027,7 +1027,7 @@ omap_i2c_isr(int irq, void *dev_id) u16 stat; stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); - mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG); + mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG) & ~OMAP_I2C_STAT_NACK; if (stat & mask) ret = IRQ_WAKE_THREAD; diff --git a/drivers/i2c/busses/i2c-pxa-pci.c b/drivers/i2c/busses/i2c-pxa-pci.c index 72ea8f4c61aa..883937c8408b 100644 --- a/drivers/i2c/busses/i2c-pxa-pci.c +++ b/drivers/i2c/busses/i2c-pxa-pci.c @@ -105,7 +105,7 @@ static int ce4100_i2c_probe(struct pci_dev *dev, int i; struct ce4100_devices *sds; - ret = pci_enable_device_mem(dev); + ret = pcim_enable_device(dev); if (ret) return ret; @@ -114,10 +114,8 @@ static int ce4100_i2c_probe(struct pci_dev *dev, return -EINVAL; } sds = kzalloc(sizeof(*sds), GFP_KERNEL); - if (!sds) { - ret = -ENOMEM; - goto err_mem; - } + if (!sds) + return -ENOMEM; for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) { sds->pdev[i] = add_i2c_device(dev, i); @@ -133,8 +131,6 @@ static int ce4100_i2c_probe(struct pci_dev *dev, err_dev_add: kfree(sds); -err_mem: - pci_disable_device(dev); return ret; } diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index e76ad020a542..fe7642b916cf 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -82,7 +82,7 @@ enum { #define DEFAULT_SCL_RATE (100 * 1000) /* Hz */ /** - * struct i2c_spec_values: + * struct i2c_spec_values - I2C specification values for various modes * @min_hold_start_ns: min hold time (repeated) START condition * @min_low_ns: min LOW period of the SCL clock * @min_high_ns: min HIGH period of the SCL cloc @@ -138,7 +138,7 @@ static const struct i2c_spec_values fast_mode_plus_spec = { }; /** - * struct rk3x_i2c_calced_timings: + * struct rk3x_i2c_calced_timings - calculated V1 timings * @div_low: Divider output for low * @div_high: Divider output for high * @tuning: Used to adjust setup/hold data time, @@ -161,7 +161,7 @@ enum rk3x_i2c_state { }; /** - * struct rk3x_i2c_soc_data: + * struct rk3x_i2c_soc_data - SOC-specific data * @grf_offset: offset inside the grf regmap for setting the i2c type * @calc_timings: Callback function for i2c timing information calculated */ @@ -241,7 +241,8 @@ static inline void rk3x_i2c_clean_ipd(struct rk3x_i2c *i2c) } /** - * Generate a START condition, which triggers a REG_INT_START interrupt. + * rk3x_i2c_start - Generate a START condition, which triggers a REG_INT_START interrupt. + * @i2c: target controller data */ static void rk3x_i2c_start(struct rk3x_i2c *i2c) { @@ -260,8 +261,8 @@ static void rk3x_i2c_start(struct rk3x_i2c *i2c) } /** - * Generate a STOP condition, which triggers a REG_INT_STOP interrupt. - * + * rk3x_i2c_stop - Generate a STOP condition, which triggers a REG_INT_STOP interrupt. + * @i2c: target controller data * @error: Error code to return in rk3x_i2c_xfer */ static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error) @@ -300,7 +301,8 @@ static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error) } /** - * Setup a read according to i2c->msg + * rk3x_i2c_prepare_read - Setup a read according to i2c->msg + * @i2c: target controller data */ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c) { @@ -331,7 +333,8 @@ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c) } /** - * Fill the transmit buffer with data from i2c->msg + * rk3x_i2c_fill_transmit_buf - Fill the transmit buffer with data from i2c->msg + * @i2c: target controller data */ static void rk3x_i2c_fill_transmit_buf(struct rk3x_i2c *i2c) { @@ -418,7 +421,7 @@ static void rk3x_i2c_handle_read(struct rk3x_i2c *i2c, unsigned int ipd) { unsigned int i; unsigned int len = i2c->msg->len - i2c->processed; - u32 uninitialized_var(val); + u32 val; u8 byte; /* we only care for MBRF here. */ @@ -534,11 +537,10 @@ out: } /** - * Get timing values of I2C specification - * + * rk3x_i2c_get_spec - Get timing values of I2C specification * @speed: Desired SCL frequency * - * Returns: Matched i2c spec values. + * Return: Matched i2c_spec_values. */ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed) { @@ -551,13 +553,12 @@ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed) } /** - * Calculate divider values for desired SCL frequency - * + * rk3x_i2c_v0_calc_timings - Calculate divider values for desired SCL frequency * @clk_rate: I2C input clock rate * @t: Known I2C timing information * @t_calc: Caculated rk3x private timings that would be written into regs * - * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case + * Return: %0 on success, -%EINVAL if the goal SCL rate is too slow. In that case * a best-effort divider value is returned in divs. If the target rate is * too high, we silently use the highest possible rate. */ @@ -712,13 +713,12 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate, } /** - * Calculate timing values for desired SCL frequency - * + * rk3x_i2c_v1_calc_timings - Calculate timing values for desired SCL frequency * @clk_rate: I2C input clock rate * @t: Known I2C timing information * @t_calc: Caculated rk3x private timings that would be written into regs * - * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case + * Return: %0 on success, -%EINVAL if the goal SCL rate is too slow. In that case * a best-effort divider value is returned in divs. If the target rate is * too high, we silently use the highest possible rate. * The following formulas are v1's method to calculate timings. @@ -962,14 +962,14 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long } /** - * Setup I2C registers for an I2C operation specified by msgs, num. - * - * Must be called with i2c->lock held. - * + * rk3x_i2c_setup - Setup I2C registers for an I2C operation specified by msgs, num. + * @i2c: target controller data * @msgs: I2C msgs to process * @num: Number of msgs * - * returns: Number of I2C msgs processed or negative in case of error + * Must be called with i2c->lock held. + * + * Return: Number of I2C msgs processed or negative in case of error */ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num) { diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 4c6036920388..fe245dfdaf4d 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -233,8 +233,17 @@ static bool is_ack(struct s3c24xx_i2c *i2c) int tries; for (tries = 50; tries; --tries) { - if (readl(i2c->regs + S3C2410_IICCON) - & S3C2410_IICCON_IRQPEND) { + unsigned long tmp = readl(i2c->regs + S3C2410_IICCON); + + if (!(tmp & S3C2410_IICCON_ACKEN)) { + /* + * Wait a bit for the bus to stabilize, + * delay estimated experimentally. + */ + usleep_range(100, 200); + return true; + } + if (tmp & S3C2410_IICCON_IRQPEND) { if (!(readl(i2c->regs + S3C2410_IICSTAT) & S3C2410_IICSTAT_LASTBIT)) return true; @@ -287,16 +296,6 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, stat |= S3C2410_IICSTAT_START; writel(stat, i2c->regs + S3C2410_IICSTAT); - - if (i2c->quirks & QUIRK_POLL) { - while ((i2c->msg_num != 0) && is_ack(i2c)) { - i2c_s3c_irq_nextbyte(i2c, stat); - stat = readl(i2c->regs + S3C2410_IICSTAT); - - if (stat & S3C2410_IICSTAT_ARBITR) - dev_err(i2c->dev, "deal with arbitration loss\n"); - } - } } static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret) @@ -703,7 +702,7 @@ static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c) static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int num) { - unsigned long timeout; + unsigned long timeout = 0; int ret; if (i2c->suspended) @@ -726,16 +725,19 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, s3c24xx_i2c_message_start(i2c, msgs); if (i2c->quirks & QUIRK_POLL) { - ret = i2c->msg_idx; + while ((i2c->msg_num != 0) && is_ack(i2c)) { + unsigned long stat = readl(i2c->regs + S3C2410_IICSTAT); - if (ret != num) - dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret); + i2c_s3c_irq_nextbyte(i2c, stat); - goto out; + stat = readl(i2c->regs + S3C2410_IICSTAT); + if (stat & S3C2410_IICSTAT_ARBITR) + dev_err(i2c->dev, "deal with arbitration loss\n"); + } + } else { + timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); } - timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); - ret = i2c->msg_idx; /* diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c index bb1478e781c4..6c95b809abdc 100644 --- a/drivers/i2c/busses/i2c-sprd.c +++ b/drivers/i2c/busses/i2c-sprd.c @@ -581,10 +581,12 @@ static int sprd_i2c_remove(struct platform_device *pdev) ret = pm_runtime_get_sync(i2c_dev->dev); if (ret < 0) - return ret; + dev_err(&pdev->dev, "Failed to resume device (%pe)\n", ERR_PTR(ret)); i2c_del_adapter(&i2c_dev->adap); - clk_disable_unprepare(i2c_dev->clk); + + if (ret >= 0) + clk_disable_unprepare(i2c_dev->clk); pm_runtime_put_noidle(i2c_dev->dev); pm_runtime_disable(i2c_dev->dev); diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index e352c16087bb..cbffe303fbc3 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -959,9 +959,10 @@ static int stm32f7_i2c_smbus_xfer_msg(struct stm32f7_i2c_dev *i2c_dev, /* Configure PEC */ if ((flags & I2C_CLIENT_PEC) && f7_msg->size != I2C_SMBUS_QUICK) { cr1 |= STM32F7_I2C_CR1_PECEN; - cr2 |= STM32F7_I2C_CR2_PECBYTE; - if (!f7_msg->read_write) + if (!f7_msg->read_write) { + cr2 |= STM32F7_I2C_CR2_PECBYTE; f7_msg->count++; + } } else { cr1 &= ~STM32F7_I2C_CR1_PECEN; cr2 &= ~STM32F7_I2C_CR2_PECBYTE; @@ -1049,8 +1050,10 @@ static void stm32f7_i2c_smbus_rep_start(struct stm32f7_i2c_dev *i2c_dev) f7_msg->stop = true; /* Add one byte for PEC if needed */ - if (cr1 & STM32F7_I2C_CR1_PECEN) + if (cr1 & STM32F7_I2C_CR1_PECEN) { + cr2 |= STM32F7_I2C_CR2_PECBYTE; f7_msg->count++; + } /* Set number of bytes to be transferred */ cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK); diff --git a/drivers/i2c/busses/i2c-sun6i-p2wi.c b/drivers/i2c/busses/i2c-sun6i-p2wi.c index 7c07ce116e38..540c33f4e350 100644 --- a/drivers/i2c/busses/i2c-sun6i-p2wi.c +++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c @@ -202,6 +202,11 @@ static int p2wi_probe(struct platform_device *pdev) return -EINVAL; } + if (clk_freq == 0) { + dev_err(dev, "clock-frequency is set to 0 in DT\n"); + return -EINVAL; + } + if (of_get_child_count(np) > 1) { dev_err(dev, "P2WI only supports one slave device\n"); return -EINVAL; diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c index a7ac746018ad..7a746f413535 100644 --- a/drivers/i2c/busses/i2c-xgene-slimpro.c +++ b/drivers/i2c/busses/i2c-xgene-slimpro.c @@ -321,6 +321,9 @@ static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip, u32 msg[3]; int rc; + if (writelen > I2C_SMBUS_BLOCK_MAX) + return -EINVAL; + memcpy(ctx->dma_buffer, data, writelen); paddr = dma_map_single(ctx->dev, ctx->dma_buffer, writelen, DMA_TO_DEVICE); diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 03ce9b7d6456..c1f85114ab81 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -362,6 +362,9 @@ static irqreturn_t xiic_process(int irq, void *dev_id) struct xiic_i2c *i2c = dev_id; u32 pend, isr, ier; u32 clr = 0; + int xfer_more = 0; + int wakeup_req = 0; + int wakeup_code = 0; /* Get the interrupt Status from the IPIF. There is no clearing of * interrupts in the IPIF. Interrupts must be cleared at the source. @@ -398,10 +401,16 @@ static irqreturn_t xiic_process(int irq, void *dev_id) */ xiic_reinit(i2c); - if (i2c->rx_msg) - xiic_wakeup(i2c, STATE_ERROR); - if (i2c->tx_msg) - xiic_wakeup(i2c, STATE_ERROR); + if (i2c->rx_msg) { + wakeup_req = 1; + wakeup_code = STATE_ERROR; + } + if (i2c->tx_msg) { + wakeup_req = 1; + wakeup_code = STATE_ERROR; + } + /* don't try to handle other events */ + goto out; } if (pend & XIIC_INTR_RX_FULL_MASK) { /* Receive register/FIFO is full */ @@ -435,8 +444,7 @@ static irqreturn_t xiic_process(int irq, void *dev_id) i2c->tx_msg++; dev_dbg(i2c->adap.dev.parent, "%s will start next...\n", __func__); - - __xiic_start_xfer(i2c); + xfer_more = 1; } } } @@ -450,11 +458,13 @@ static irqreturn_t xiic_process(int irq, void *dev_id) if (!i2c->tx_msg) goto out; - if ((i2c->nmsgs == 1) && !i2c->rx_msg && - xiic_tx_space(i2c) == 0) - xiic_wakeup(i2c, STATE_DONE); + wakeup_req = 1; + + if (i2c->nmsgs == 1 && !i2c->rx_msg && + xiic_tx_space(i2c) == 0) + wakeup_code = STATE_DONE; else - xiic_wakeup(i2c, STATE_ERROR); + wakeup_code = STATE_ERROR; } if (pend & (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)) { /* Transmit register/FIFO is empty or ½ empty */ @@ -478,7 +488,7 @@ static irqreturn_t xiic_process(int irq, void *dev_id) if (i2c->nmsgs > 1) { i2c->nmsgs--; i2c->tx_msg++; - __xiic_start_xfer(i2c); + xfer_more = 1; } else { xiic_irq_dis(i2c, XIIC_INTR_TX_HALF_MASK); @@ -496,6 +506,13 @@ out: dev_dbg(i2c->adap.dev.parent, "%s clr: 0x%x\n", __func__, clr); xiic_setreg32(i2c, XIIC_IISR_OFFSET, clr); + if (xfer_more) + __xiic_start_xfer(i2c); + if (wakeup_req) + xiic_wakeup(i2c, wakeup_code); + + WARN_ON(xfer_more && wakeup_req); + mutex_unlock(&i2c->lock); return IRQ_HANDLED; } |