aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot')
-rw-r--r--arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts1
-rw-r--r--arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts1
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi783
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916.dtsi4
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996.dtsi213
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998.dtsi32
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845.dtsi25
7 files changed, 543 insertions, 516 deletions
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 7b095378c96c..eec9ec1db682 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -71,6 +71,7 @@
memory@40000000 {
reg = <0 0x40000000 0 0x40000000>;
+ device_type = "memory";
};
reg_1p8v: regulator-1p8v {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index f586c1ee4a59..ee57fccd489a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -57,6 +57,7 @@
memory@40000000 {
reg = <0 0x40000000 0 0x20000000>;
+ device_type = "memory";
};
reg_1p8v: regulator-1p8v {
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index dba3488492f1..21e029afb27b 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -77,425 +77,427 @@
enable-gpios = <&pm8994_gpios 15 0>;
};
};
+};
- soc {
- serial@7570000 {
- label = "BT-UART";
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart1_default>;
- pinctrl-1 = <&blsp1_uart1_sleep>;
+&blsp1_uart1 {
+ label = "BT-UART";
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart1_default>;
+ pinctrl-1 = <&blsp1_uart1_sleep>;
- bluetooth {
- compatible = "qcom,qca6174-bt";
+ bluetooth {
+ compatible = "qcom,qca6174-bt";
- /* bt_disable_n gpio */
- enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+ /* bt_disable_n gpio */
+ enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
- clocks = <&divclk4>;
- };
- };
+ clocks = <&divclk4>;
+ };
+};
- serial@75b0000 {
- label = "LS-UART1";
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart1_2pins_default>;
- pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
- };
+&blsp2_uart1 {
+ label = "LS-UART1";
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart1_2pins_default>;
+ pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+};
- serial@75b1000 {
- label = "LS-UART0";
- status = "disabled";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart2_4pins_default>;
- pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
- };
+&blsp2_uart2 {
+ label = "LS-UART0";
+ status = "disabled";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart2_4pins_default>;
+ pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+};
- i2c@7577000 {
- /* On Low speed expansion */
- label = "LS-I2C0";
- status = "okay";
- };
+&blsp1_i2c2 {
+ /* On Low speed expansion */
+ label = "LS-I2C0";
+ status = "okay";
+};
- i2c@75b6000 {
- /* On Low speed expansion */
- label = "LS-I2C1";
- status = "okay";
- };
+&blsp2_i2c1 {
+ /* On Low speed expansion */
+ label = "LS-I2C1";
+ status = "okay";
+};
- spi@7575000 {
- /* On Low speed expansion */
- label = "LS-SPI0";
- status = "okay";
- };
+&blsp1_spi0 {
+ /* On Low speed expansion */
+ label = "LS-SPI0";
+ status = "okay";
+};
- i2c@75b5000 {
- /* On High speed expansion */
- label = "HS-I2C2";
- status = "okay";
- };
+&blsp2_i2c0 {
+ /* On High speed expansion */
+ label = "HS-I2C2";
+ status = "okay";
+};
- spi@75ba000{
- /* On High speed expansion */
- label = "HS-SPI1";
- status = "okay";
- };
+&blsp2_spi5 {
+ /* On High speed expansion */
+ label = "HS-SPI1";
+ status = "okay";
+};
- sdhci@74a4900 {
- /* External SD card */
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
- cd-gpios = <&msmgpio 38 0x1>;
- vmmc-supply = <&pm8994_l21>;
- vqmmc-supply = <&pm8994_l13>;
- status = "okay";
- };
+&camss {
+ vdda-supply = <&pm8994_l2>;
+};
- phy@627000 {
- status = "okay";
- };
+&sdhc2 {
+ /* External SD card */
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+ cd-gpios = <&msmgpio 38 0x1>;
+ vmmc-supply = <&pm8994_l21>;
+ vqmmc-supply = <&pm8994_l13>;
+ status = "okay";
+};
- ufshc@624000 {
- status = "okay";
- };
+&ufsphy {
+ status = "okay";
- pinctrl@1010000 {
- gpio-line-names =
- "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
- "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
- "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
- "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
- "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
- "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
- "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
- "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
- "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
- "TP93", /* GPIO_9 */
- "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
- "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
- "NC", /* GPIO_12 */
- "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
- "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
- "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
- "TP99", /* GPIO_16 */
- "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
- "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
- "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
- "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
- "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
- "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
- "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
- "GPIO-D", /* GPIO_24, LSEC pin 26 */
- "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
- "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
- "BLSP6_I2C_SDA", /* GPIO_27 */
- "BLSP6_I2C_SCL", /* GPIO_28 */
- "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
- "GPIO30", /* GPIO_30, S HSEC pin 4 */
- "HDMI_CEC", /* GPIO_31 */
- "HDMI_DDC_CLOCK", /* GPIO_32 */
- "HDMI_DDC_DATA", /* GPIO_33 */
- "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
- "PCIE0_RST_N", /* GPIO_35 */
- "PCIE0_CLKREQ_N", /* GPIO_36 */
- "PCIE0_WAKE", /* GPIO_37 */
- "SD_CARD_DET_N", /* GPIO_38 */
- "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
- "W_DISABLE_N", /* GPIO_40 */
- "[BLSP9_UART_TX]", /* GPIO_41 */
- "[BLSP9_UART_RX]", /* GPIO_42 */
- "[BLSP2_UART_CTS_N]", /* GPIO_43 */
- "[BLSP2_UART_RFR_N]", /* GPIO_44 */
- "[BLSP3_UART_TX]", /* GPIO_45 */
- "[BLSP3_UART_RX]", /* GPIO_46 */
- "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
- "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
- "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
- "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
- "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
- "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
- "[CODEC_INT1_N]", /* GPIO_53 */
- "[CODEC_INT2_N]", /* GPIO_54 */
- "[BLSP7_I2C_SDA]", /* GPIO_55 */
- "[BLSP7_I2C_SCL]", /* GPIO_56 */
- "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
- "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
- "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
- "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
- "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
- "GPIO-E", /* GPIO_62, LSEC pin 27 */
- "TP87", /* GPIO_63 */
- "[CODEC_RST_N]", /* GPIO_64 */
- "[PCM1_CLK]", /* GPIO_65 */
- "[PCM1_SYNC]", /* GPIO_66 */
- "[PCM1_DIN]", /* GPIO_67 */
- "[PCM1_DOUT]", /* GPIO_68 */
- "AUDIO_REF_CLK", /* GPIO_69 */
- "SLIMBUS_CLK", /* GPIO_70 */
- "SLIMBUS_DATA0", /* GPIO_71 */
- "SLIMBUS_DATA1", /* GPIO_72 */
- "NC", /* GPIO_73 */
- "NC", /* GPIO_74 */
- "NC", /* GPIO_75 */
- "NC", /* GPIO_76 */
- "TP94", /* GPIO_77 */
- "NC", /* GPIO_78 */
- "TP95", /* GPIO_79 */
- "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
- "TP88", /* GPIO_81 */
- "TP89", /* GPIO_82 */
- "TP90", /* GPIO_83 */
- "TP91", /* GPIO_84 */
- "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
- "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
- "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
- "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
- "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
- "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
- "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
- "NC", /* GPIO_92 */
- "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
- "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
- "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
- "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
- "NC", /* GPIO_97 */
- "CAM1_STANDBY_N", /* GPIO_98 */
- "NC", /* GPIO_99 */
- "NC", /* GPIO_100 */
- "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
- "BOOT_CONFIG1", /* GPIO_102 */
- "USB_HUB_RESET", /* GPIO_103 */
- "CAM1_RST_N", /* GPIO_104 */
- "NC", /* GPIO_105 */
- "NC", /* GPIO_106 */
- "NC", /* GPIO_107 */
- "NC", /* GPIO_108 */
- "NC", /* GPIO_109 */
- "NC", /* GPIO_110 */
- "NC", /* GPIO_111 */
- "NC", /* GPIO_112 */
- "PMI8994_BUA", /* GPIO_113 */
- "PCIE2_RST_N", /* GPIO_114 */
- "PCIE2_CLKREQ_N", /* GPIO_115 */
- "PCIE2_WAKE", /* GPIO_116 */
- "SSC_IRQ_0", /* GPIO_117 */
- "SSC_IRQ_1", /* GPIO_118 */
- "SSC_IRQ_2", /* GPIO_119 */
- "NC", /* GPIO_120 */
- "GPIO121", /* GPIO_121, S HSEC pin 2 */
- "NC", /* GPIO_122 */
- "SSC_IRQ_6", /* GPIO_123 */
- "SSC_IRQ_7", /* GPIO_124 */
- "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
- "BOOT_CONFIG5", /* GPIO_126 */
- "NC", /* GPIO_127 */
- "NC", /* GPIO_128 */
- "BOOT_CONFIG7", /* GPIO_129 */
- "PCIE1_RST_N", /* GPIO_130 */
- "PCIE1_CLKREQ_N", /* GPIO_131 */
- "PCIE1_WAKE", /* GPIO_132 */
- "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
- "NC", /* GPIO_134 */
- "NC", /* GPIO_135 */
- "BOOT_CONFIG8", /* GPIO_136 */
- "NC", /* GPIO_137 */
- "NC", /* GPIO_138 */
- "GPS_SSBI2", /* GPIO_139 */
- "GPS_SSBI1", /* GPIO_140 */
- "NC", /* GPIO_141 */
- "NC", /* GPIO_142 */
- "NC", /* GPIO_143 */
- "BOOT_CONFIG6", /* GPIO_144 */
- "NC", /* GPIO_145 */
- "NC", /* GPIO_146 */
- "NC", /* GPIO_147 */
- "NC", /* GPIO_148 */
- "NC"; /* GPIO_149 */
- };
+ vdda-phy-supply = <&pm8994_l28>;
+ vdda-pll-supply = <&pm8994_l12>;
- qcom,spmi@400f000 {
- pmic@0 {
- gpios@c000 {
- gpio-line-names =
- "NC",
- "KEY_VOLP_N",
- "NC",
- "BL1_PWM",
- "GPIO-F", /* BL0_PWM, LSEC pin 28 */
- "BL1_EN",
- "NC",
- "WLAN_EN",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "DIVCLK1",
- "DIVCLK2",
- "DIVCLK3",
- "DIVCLK4",
- "BT_EN",
- "PMIC_SLB",
- "PMIC_BUA",
- "USB_VBUS_DET";
- };
-
- mpps@a000 {
- gpio-line-names =
- "VDDPX_BIAS",
- "WIFI_LED",
- "NC",
- "BT_LED",
- "PM_MPP05",
- "PM_MPP06",
- "PM_MPP07",
- "NC";
- };
- };
+ vdda-phy-max-microamp = <18380>;
+ vdda-pll-max-microamp = <9440>;
- pmic@2 {
- gpios@c000 {
- gpio-line-names =
- "NC",
- "SPKR_AMP_EN1",
- "SPKR_AMP_EN2",
- "TP61",
- "NC",
- "USB2_VBUS_DET",
- "NC",
- "NC",
- "NC",
- "NC";
- };
- };
- };
+ vddp-ref-clk-supply = <&pm8994_l25>;
+ vddp-ref-clk-max-microamp = <100>;
+ vddp-ref-clk-always-on;
+};
- phy@34000 {
- status = "okay";
- };
+&ufshc {
+ status = "okay";
- phy@7410000 {
- status = "okay";
- };
+ vcc-supply = <&pm8994_l20>;
+ vccq-supply = <&pm8994_l25>;
+ vccq2-supply = <&pm8994_s4>;
- phy@7411000 {
- status = "okay";
- };
+ vcc-max-microamp = <600000>;
+ vccq-max-microamp = <450000>;
+ vccq2-max-microamp = <450000>;
+};
- phy@7412000 {
- status = "okay";
- };
+&msmgpio {
+ gpio-line-names =
+ "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
+ "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
+ "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
+ "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
+ "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
+ "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
+ "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
+ "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
+ "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
+ "TP93", /* GPIO_9 */
+ "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
+ "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
+ "NC", /* GPIO_12 */
+ "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
+ "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
+ "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
+ "TP99", /* GPIO_16 */
+ "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
+ "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
+ "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
+ "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
+ "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
+ "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
+ "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
+ "GPIO-D", /* GPIO_24, LSEC pin 26 */
+ "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
+ "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
+ "BLSP6_I2C_SDA", /* GPIO_27 */
+ "BLSP6_I2C_SCL", /* GPIO_28 */
+ "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
+ "GPIO30", /* GPIO_30, S HSEC pin 4 */
+ "HDMI_CEC", /* GPIO_31 */
+ "HDMI_DDC_CLOCK", /* GPIO_32 */
+ "HDMI_DDC_DATA", /* GPIO_33 */
+ "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
+ "PCIE0_RST_N", /* GPIO_35 */
+ "PCIE0_CLKREQ_N", /* GPIO_36 */
+ "PCIE0_WAKE", /* GPIO_37 */
+ "SD_CARD_DET_N", /* GPIO_38 */
+ "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
+ "W_DISABLE_N", /* GPIO_40 */
+ "[BLSP9_UART_TX]", /* GPIO_41 */
+ "[BLSP9_UART_RX]", /* GPIO_42 */
+ "[BLSP2_UART_CTS_N]", /* GPIO_43 */
+ "[BLSP2_UART_RFR_N]", /* GPIO_44 */
+ "[BLSP3_UART_TX]", /* GPIO_45 */
+ "[BLSP3_UART_RX]", /* GPIO_46 */
+ "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
+ "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
+ "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
+ "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
+ "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
+ "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
+ "[CODEC_INT1_N]", /* GPIO_53 */
+ "[CODEC_INT2_N]", /* GPIO_54 */
+ "[BLSP7_I2C_SDA]", /* GPIO_55 */
+ "[BLSP7_I2C_SCL]", /* GPIO_56 */
+ "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
+ "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
+ "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
+ "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
+ "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
+ "GPIO-E", /* GPIO_62, LSEC pin 27 */
+ "TP87", /* GPIO_63 */
+ "[CODEC_RST_N]", /* GPIO_64 */
+ "[PCM1_CLK]", /* GPIO_65 */
+ "[PCM1_SYNC]", /* GPIO_66 */
+ "[PCM1_DIN]", /* GPIO_67 */
+ "[PCM1_DOUT]", /* GPIO_68 */
+ "AUDIO_REF_CLK", /* GPIO_69 */
+ "SLIMBUS_CLK", /* GPIO_70 */
+ "SLIMBUS_DATA0", /* GPIO_71 */
+ "SLIMBUS_DATA1", /* GPIO_72 */
+ "NC", /* GPIO_73 */
+ "NC", /* GPIO_74 */
+ "NC", /* GPIO_75 */
+ "NC", /* GPIO_76 */
+ "TP94", /* GPIO_77 */
+ "NC", /* GPIO_78 */
+ "TP95", /* GPIO_79 */
+ "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
+ "TP88", /* GPIO_81 */
+ "TP89", /* GPIO_82 */
+ "TP90", /* GPIO_83 */
+ "TP91", /* GPIO_84 */
+ "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
+ "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
+ "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
+ "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
+ "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
+ "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
+ "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
+ "NC", /* GPIO_92 */
+ "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
+ "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
+ "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
+ "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
+ "NC", /* GPIO_97 */
+ "CAM1_STANDBY_N", /* GPIO_98 */
+ "NC", /* GPIO_99 */
+ "NC", /* GPIO_100 */
+ "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
+ "BOOT_CONFIG1", /* GPIO_102 */
+ "USB_HUB_RESET", /* GPIO_103 */
+ "CAM1_RST_N", /* GPIO_104 */
+ "NC", /* GPIO_105 */
+ "NC", /* GPIO_106 */
+ "NC", /* GPIO_107 */
+ "NC", /* GPIO_108 */
+ "NC", /* GPIO_109 */
+ "NC", /* GPIO_110 */
+ "NC", /* GPIO_111 */
+ "NC", /* GPIO_112 */
+ "PMI8994_BUA", /* GPIO_113 */
+ "PCIE2_RST_N", /* GPIO_114 */
+ "PCIE2_CLKREQ_N", /* GPIO_115 */
+ "PCIE2_WAKE", /* GPIO_116 */
+ "SSC_IRQ_0", /* GPIO_117 */
+ "SSC_IRQ_1", /* GPIO_118 */
+ "SSC_IRQ_2", /* GPIO_119 */
+ "NC", /* GPIO_120 */
+ "GPIO121", /* GPIO_121, S HSEC pin 2 */
+ "NC", /* GPIO_122 */
+ "SSC_IRQ_6", /* GPIO_123 */
+ "SSC_IRQ_7", /* GPIO_124 */
+ "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
+ "BOOT_CONFIG5", /* GPIO_126 */
+ "NC", /* GPIO_127 */
+ "NC", /* GPIO_128 */
+ "BOOT_CONFIG7", /* GPIO_129 */
+ "PCIE1_RST_N", /* GPIO_130 */
+ "PCIE1_CLKREQ_N", /* GPIO_131 */
+ "PCIE1_WAKE", /* GPIO_132 */
+ "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
+ "NC", /* GPIO_134 */
+ "NC", /* GPIO_135 */
+ "BOOT_CONFIG8", /* GPIO_136 */
+ "NC", /* GPIO_137 */
+ "NC", /* GPIO_138 */
+ "GPS_SSBI2", /* GPIO_139 */
+ "GPS_SSBI1", /* GPIO_140 */
+ "NC", /* GPIO_141 */
+ "NC", /* GPIO_142 */
+ "NC", /* GPIO_143 */
+ "BOOT_CONFIG6", /* GPIO_144 */
+ "NC", /* GPIO_145 */
+ "NC", /* GPIO_146 */
+ "NC", /* GPIO_147 */
+ "NC", /* GPIO_148 */
+ "NC"; /* GPIO_149 */
+};
- usb@6af8800 {
- status = "okay";
- extcon = <&usb3_id>;
+&pm8994_gpios {
+ gpio-line-names =
+ "NC",
+ "KEY_VOLP_N",
+ "NC",
+ "BL1_PWM",
+ "GPIO-F", /* BL0_PWM, LSEC pin 28 */
+ "BL1_EN",
+ "NC",
+ "WLAN_EN",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "DIVCLK1",
+ "DIVCLK2",
+ "DIVCLK3",
+ "DIVCLK4",
+ "BT_EN",
+ "PMIC_SLB",
+ "PMIC_BUA",
+ "USB_VBUS_DET";
+};
- dwc3@6a00000 {
- extcon = <&usb3_id>;
- dr_mode = "otg";
- };
- };
+&pm8994_mpps {
+ gpio-line-names =
+ "VDDPX_BIAS",
+ "WIFI_LED",
+ "NC",
+ "BT_LED",
+ "PM_MPP05",
+ "PM_MPP06",
+ "PM_MPP07",
+ "NC";
+};
- usb3_id: usb3-id {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb3_vbus_det_gpio>;
- };
+&pmi8994_gpios {
+ gpio-line-names =
+ "NC",
+ "SPKR_AMP_EN1",
+ "SPKR_AMP_EN2",
+ "TP61",
+ "NC",
+ "USB2_VBUS_DET",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+};
- usb@76f8800 {
- status = "okay";
- extcon = <&usb2_id>;
+&pcie_phy {
+ status = "okay";
- dwc3@7600000 {
- extcon = <&usb2_id>;
- dr_mode = "otg";
- maximum-speed = "high-speed";
- };
- };
+ vdda-phy-supply = <&pm8994_l28>;
+ vdda-pll-supply = <&pm8994_l12>;
+};
- usb2_id: usb2-id {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_vbus_det_gpio>;
- };
+&usb3phy {
+ status = "okay";
- wlan_en: wlan-en-1-8v {
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_en_gpios>;
- compatible = "regulator-fixed";
- regulator-name = "wlan-en-regulator";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ vdda-phy-supply = <&pm8994_l28>;
+ vdda-pll-supply = <&pm8994_l12>;
- gpio = <&pm8994_gpios 8 0>;
+};
- /* WLAN card specific delay */
- startup-delay-us = <70000>;
- enable-active-high;
- };
+&hsusb_phy1 {
+ status = "okay";
- agnoc@0 {
- pcie@600000 {
- status = "okay";
- perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
- vddpe-3v3-supply = <&wlan_en>;
- };
+ vdda-pll-supply = <&pm8994_l12>;
+ vdda-phy-dpdm-supply = <&pm8994_l24>;
+};
- pcie@608000 {
- status = "okay";
- perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
- };
+&hsusb_phy2 {
+ status = "okay";
- pcie@610000 {
- status = "okay";
- perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
- };
- };
+ vdda-pll-supply = <&pm8994_l12>;
+ vdda-phy-dpdm-supply = <&pm8994_l24>;
+};
- slim_msm: slim@91c0000 {
- ngd@1 {
- wcd9335: codec@1{
- clock-names = "mclk", "slimbus";
- clocks = <&div1_mclk>,
- <&rpmcc RPM_SMD_BB_CLK1>;
- };
- };
- };
+&usb3 {
+ status = "okay";
+ extcon = <&usb3_id>;
- mdss@900000 {
- status = "okay";
+ dwc3@6a00000 {
+ extcon = <&usb3_id>;
+ dr_mode = "otg";
+ };
+};
- mdp@901000 {
- status = "okay";
- };
+&usb2 {
+ status = "okay";
+ extcon = <&usb2_id>;
- hdmi-phy@9a0600 {
- status = "okay";
+ dwc3@7600000 {
+ extcon = <&usb2_id>;
+ dr_mode = "otg";
+ maximum-speed = "high-speed";
+ };
+};
- vddio-supply = <&pm8994_l12>;
- vcca-supply = <&pm8994_l28>;
- #phy-cells = <0>;
- };
+&pcie0 {
+ status = "okay";
+ perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+ vddpe-3v3-supply = <&wlan_en>;
+ vdda-supply = <&pm8994_l28>;
+};
- hdmi-tx@9a0000 {
- status = "okay";
+&pcie1 {
+ status = "okay";
+ perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
+ vdda-supply = <&pm8994_l28>;
+};
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
- pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+&pcie2 {
+ status = "okay";
+ perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
+ vdda-supply = <&pm8994_l28>;
+};
- core-vdda-supply = <&pm8994_l12>;
- core-vcc-supply = <&pm8994_s4>;
- };
- };
- };
+&wcd9335 {
+ clock-names = "mclk", "slimbus";
+ clocks = <&div1_mclk>,
+ <&rpmcc RPM_SMD_BB_CLK1>;
+ vdd-buck-supply = <&pm8994_s4>;
+ vdd-buck-sido-supply = <&pm8994_s4>;
+ vdd-tx-supply = <&pm8994_s4>;
+ vdd-rx-supply = <&pm8994_s4>;
+ vdd-io-supply = <&pm8994_s4>;
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdp {
+ status = "okay";
+};
+
+&hdmi_phy {
+ status = "okay";
+
+ vddio-supply = <&pm8994_l12>;
+ vcca-supply = <&pm8994_l28>;
+ #phy-cells = <0>;
+};
+
+&hdmi {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+ pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+ core-vdda-supply = <&pm8994_l12>;
+ core-vcc-supply = <&pm8994_s4>;
+};
+/ {
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
@@ -667,6 +669,35 @@
};
};
};
+
+ usb2_id: usb2-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_vbus_det_gpio>;
+ };
+
+ usb3_id: usb3-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_vbus_det_gpio>;
+ };
+
+ wlan_en: wlan-en-1-8v {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_en_gpios>;
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&pm8994_gpios 8 0>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
};
&spmi_bus {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index bf40500adef7..e1097ba6c948 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1097,8 +1097,8 @@
vddmx-supply = <&pm8916_l3>;
vddpx-supply = <&pm8916_l7>;
- qcom,state = <&wcnss_smp2p_out 0>;
- qcom,state-names = "stop";
+ qcom,smem-states = <&wcnss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
pinctrl-names = "default";
pinctrl-0 = <&wcnss_pin_a>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f1d3c51ea8d0..8bfb897b0e81 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -433,6 +433,19 @@
};
};
+ etm {
+ compatible = "qcom,coresight-remote-etm";
+
+ out-ports {
+ port {
+ modem_etm_out_funnel_in2: endpoint {
+ remote-endpoint =
+ <&funnel_in2_in_modem_etm>;
+ };
+ };
+ };
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -571,7 +584,7 @@
rpm_msg_ram: memory@68000 {
compatible = "qcom,rpm-msg-ram";
- reg = <0x68000 0x6000>;
+ reg = <0x00068000 0x6000>;
};
rng: rng@83000 {
@@ -583,28 +596,28 @@
tcsr_mutex_regs: syscon@740000 {
compatible = "syscon";
- reg = <0x740000 0x20000>;
+ reg = <0x00740000 0x20000>;
};
tsens0: thermal-sensor@4a9000 {
compatible = "qcom,msm8996-tsens";
- reg = <0x4a9000 0x1000>, /* TM */
- <0x4a8000 0x1000>; /* SROT */
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
#qcom,sensors = <13>;
#thermal-sensor-cells = <1>;
};
tsens1: thermal-sensor@4ad000 {
compatible = "qcom,msm8996-tsens";
- reg = <0x4ad000 0x1000>, /* TM */
- <0x4ac000 0x1000>; /* SROT */
+ reg = <0x004ad000 0x1000>, /* TM */
+ <0x004ac000 0x1000>; /* SROT */
#qcom,sensors = <8>;
#thermal-sensor-cells = <1>;
};
tcsr: syscon@7a0000 {
compatible = "qcom,tcsr-msm8996", "syscon";
- reg = <0x7a0000 0x18000>;
+ reg = <0x007a0000 0x18000>;
};
intc: interrupt-controller@9bc0000 {
@@ -620,7 +633,7 @@
apcs_glb: mailbox@9820000 {
compatible = "qcom,msm8996-apcs-hmss-global";
- reg = <0x9820000 0x1000>;
+ reg = <0x09820000 0x1000>;
#mbox-cells = <1>;
};
@@ -630,7 +643,7 @@
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- reg = <0x300000 0x90000>;
+ reg = <0x00300000 0x90000>;
};
stm@3002000 {
@@ -736,6 +749,14 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
+ in-ports {
+ port {
+ funnel_in2_in_modem_etm: endpoint {
+ remote-endpoint =
+ <&modem_etm_out_funnel_in2>;
+ };
+ };
+ };
out-ports {
port {
@@ -1103,7 +1124,7 @@
kryocc: clock-controller@6400000 {
compatible = "qcom,apcc-msm8996";
- reg = <0x6400000 0x90000>;
+ reg = <0x06400000 0x90000>;
#clock-cells = <1>;
};
@@ -1149,7 +1170,7 @@
blsp2_uart1: serial@75b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x75b0000 0x1000>;
+ reg = <0x075b0000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
@@ -1215,7 +1236,7 @@
sdhc2: sdhci@74a4900 {
status = "disabled";
compatible = "qcom,sdhci-msm-v4";
- reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
+ reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
@@ -1300,11 +1321,11 @@
spmi_bus: qcom,spmi@400f000 {
compatible = "qcom,spmi-pmic-arb";
- reg = <0x400f000 0x1000>,
- <0x4400000 0x800000>,
- <0x4c00000 0x800000>,
- <0x5800000 0x200000>,
- <0x400a000 0x002100>;
+ reg = <0x0400f000 0x1000>,
+ <0x04400000 0x800000>,
+ <0x04c00000 0x800000>,
+ <0x05800000 0x200000>,
+ <0x0400a000 0x002100>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
@@ -1318,20 +1339,10 @@
ufsphy: phy@627000 {
compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
- reg = <0x627000 0xda8>;
+ reg = <0x00627000 0xda8>;
reg-names = "phy_mem";
#phy-cells = <0>;
- vdda-phy-supply = <&pm8994_l28>;
- vdda-pll-supply = <&pm8994_l12>;
-
- vdda-phy-max-microamp = <18380>;
- vdda-pll-max-microamp = <9440>;
-
- vddp-ref-clk-supply = <&pm8994_l25>;
- vddp-ref-clk-max-microamp = <100>;
- vddp-ref-clk-always-on;
-
clock-names = "ref_clk_src", "ref_clk";
clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
<&gcc GCC_UFS_CLKREF_CLK>;
@@ -1341,20 +1352,12 @@
ufshc: ufshc@624000 {
compatible = "qcom,ufshc";
- reg = <0x624000 0x2500>;
+ reg = <0x00624000 0x2500>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
phys = <&ufsphy>;
phy-names = "ufsphy";
- vcc-supply = <&pm8994_l20>;
- vccq-supply = <&pm8994_l25>;
- vccq2-supply = <&pm8994_s4>;
-
- vcc-max-microamp = <600000>;
- vccq-max-microamp = <450000>;
- vccq2-max-microamp = <450000>;
-
power-domains = <&gcc UFS_GDSC>;
clock-names =
@@ -1408,7 +1411,7 @@
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- reg = <0x8c0000 0x40000>;
+ reg = <0x008c0000 0x40000>;
assigned-clocks = <&mmcc MMPLL9_PLL>,
<&mmcc MMPLL1_PLL>,
<&mmcc MMPLL3_PLL>,
@@ -1423,7 +1426,7 @@
qfprom@74000 {
compatible = "qcom,qfprom";
- reg = <0x74000 0x8ff>;
+ reg = <0x00074000 0x8ff>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1443,9 +1446,9 @@
};
};
- phy@34000 {
+ pcie_phy: phy@34000 {
compatible = "qcom,msm8996-qmp-pcie-phy";
- reg = <0x34000 0x488>;
+ reg = <0x00034000 0x488>;
#clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1456,9 +1459,6 @@
<&gcc GCC_PCIE_CLKREF_CLK>;
clock-names = "aux", "cfg_ahb", "ref";
- vdda-phy-supply = <&pm8994_l28>;
- vdda-pll-supply = <&pm8994_l12>;
-
resets = <&gcc GCC_PCIE_PHY_BCR>,
<&gcc GCC_PCIE_PHY_COM_BCR>,
<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
@@ -1466,9 +1466,9 @@
status = "disabled";
pciephy_0: lane@35000 {
- reg = <0x035000 0x130>,
- <0x035200 0x200>,
- <0x035400 0x1dc>;
+ reg = <0x00035000 0x130>,
+ <0x00035200 0x200>,
+ <0x00035400 0x1dc>;
#phy-cells = <0>;
clock-output-names = "pcie_0_pipe_clk_src";
@@ -1479,9 +1479,9 @@
};
pciephy_1: lane@36000 {
- reg = <0x036000 0x130>,
- <0x036200 0x200>,
- <0x036400 0x1dc>;
+ reg = <0x00036000 0x130>,
+ <0x00036200 0x200>,
+ <0x00036400 0x1dc>;
#phy-cells = <0>;
clock-output-names = "pcie_1_pipe_clk_src";
@@ -1492,9 +1492,9 @@
};
pciephy_2: lane@37000 {
- reg = <0x037000 0x130>,
- <0x037200 0x200>,
- <0x037400 0x1dc>;
+ reg = <0x00037000 0x130>,
+ <0x00037200 0x200>,
+ <0x00037400 0x1dc>;
#phy-cells = <0>;
clock-output-names = "pcie_2_pipe_clk_src";
@@ -1505,9 +1505,9 @@
};
};
- phy@7410000 {
+ usb3phy: phy@7410000 {
compatible = "qcom,msm8996-qmp-usb3-phy";
- reg = <0x7410000 0x1c4>;
+ reg = <0x07410000 0x1c4>;
#clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1518,18 +1518,15 @@
<&gcc GCC_USB3_CLKREF_CLK>;
clock-names = "aux", "cfg_ahb", "ref";
- vdda-phy-supply = <&pm8994_l28>;
- vdda-pll-supply = <&pm8994_l12>;
-
resets = <&gcc GCC_USB3_PHY_BCR>,
<&gcc GCC_USB3PHY_PHY_BCR>;
reset-names = "phy", "common";
status = "disabled";
ssusb_phy_0: lane@7410200 {
- reg = <0x7410200 0x200>,
- <0x7410400 0x130>,
- <0x7410600 0x1a8>;
+ reg = <0x07410200 0x200>,
+ <0x07410400 0x130>,
+ <0x07410600 0x1a8>;
#phy-cells = <0>;
clock-output-names = "usb3_phy_pipe_clk_src";
@@ -1540,16 +1537,13 @@
hsusb_phy1: phy@7411000 {
compatible = "qcom,msm8996-qusb2-phy";
- reg = <0x7411000 0x180>;
+ reg = <0x07411000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_RX1_USB2_CLKREF_CLK>;
clock-names = "cfg_ahb", "ref";
- vdda-pll-supply = <&pm8994_l12>;
- vdda-phy-dpdm-supply = <&pm8994_l24>;
-
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
nvmem-cells = <&qusb2p_hstx_trim>;
status = "disabled";
@@ -1557,16 +1551,13 @@
hsusb_phy2: phy@7412000 {
compatible = "qcom,msm8996-qusb2-phy";
- reg = <0x7412000 0x180>;
+ reg = <0x07412000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_RX2_USB2_CLKREF_CLK>;
clock-names = "cfg_ahb", "ref";
- vdda-pll-supply = <&pm8994_l12>;
- vdda-phy-dpdm-supply = <&pm8994_l24>;
-
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
nvmem-cells = <&qusb2s_hstx_trim>;
status = "disabled";
@@ -1574,7 +1565,7 @@
usb2: usb@76f8800 {
compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
- reg = <0x76f8800 0x400>;
+ reg = <0x076f8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -1594,7 +1585,7 @@
dwc3@7600000 {
compatible = "snps,dwc3";
- reg = <0x7600000 0xcc00>;
+ reg = <0x07600000 0xcc00>;
interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hsusb_phy2>;
phy-names = "usb2-phy";
@@ -1605,7 +1596,7 @@
usb3: usb@6af8800 {
compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
- reg = <0x6af8800 0x400>;
+ reg = <0x06af8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -1626,7 +1617,7 @@
dwc3@6a00000 {
compatible = "snps,dwc3";
- reg = <0x6a00000 0xcc00>;
+ reg = <0x06a00000 0xcc00>;
interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hsusb_phy1>, <&ssusb_phy_0>;
phy-names = "usb2-phy", "usb3-phy";
@@ -1637,7 +1628,7 @@
vfe_smmu: iommu@da0000 {
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0xda0000 0x10000>;
+ reg = <0x00da0000 0x10000>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -1653,20 +1644,20 @@
camss: camss@a00000 {
compatible = "qcom,msm8996-camss";
- reg = <0xa34000 0x1000>,
- <0xa00030 0x4>,
- <0xa35000 0x1000>,
- <0xa00038 0x4>,
- <0xa36000 0x1000>,
- <0xa00040 0x4>,
- <0xa30000 0x100>,
- <0xa30400 0x100>,
- <0xa30800 0x100>,
- <0xa30c00 0x100>,
- <0xa31000 0x500>,
- <0xa00020 0x10>,
- <0xa10000 0x1000>,
- <0xa14000 0x1000>;
+ reg = <0x00a34000 0x1000>,
+ <0x00a00030 0x4>,
+ <0x00a35000 0x1000>,
+ <0x00a00038 0x4>,
+ <0x00a36000 0x1000>,
+ <0x00a00040 0x4>,
+ <0x00a30000 0x100>,
+ <0x00a30400 0x100>,
+ <0x00a30800 0x100>,
+ <0x00a30c00 0x100>,
+ <0x00a31000 0x500>,
+ <0x00a00020 0x10>,
+ <0x00a10000 0x1000>,
+ <0x00a14000 0x1000>;
reg-names = "csiphy0",
"csiphy0_clk_mux",
"csiphy1",
@@ -1774,7 +1765,6 @@
"vfe1_stream",
"vfe_ahb",
"vfe_axi";
- vdda-supply = <&pm8994_l2>;
iommus = <&vfe_smmu 0>,
<&vfe_smmu 1>,
<&vfe_smmu 2>,
@@ -1788,7 +1778,7 @@
adreno_smmu: iommu@b40000 {
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0xb40000 0x10000>;
+ reg = <0x00b40000 0x10000>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
@@ -1805,7 +1795,7 @@
mdp_smmu: iommu@d00000 {
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0xd00000 0x10000>;
+ reg = <0x00d00000 0x10000>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
@@ -1821,7 +1811,7 @@
lpass_q6_smmu: iommu@1600000 {
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0x1600000 0x20000>;
+ reg = <0x01600000 0x20000>;
#iommu-cells = <1>;
power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
@@ -1886,9 +1876,6 @@
pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
-
- vdda-supply = <&pm8994_l28>;
-
linux,pci-domain = <0>;
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
@@ -1941,8 +1928,6 @@
pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
-
- vdda-supply = <&pm8994_l28>;
linux,pci-domain = <1>;
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
@@ -1994,8 +1979,6 @@
pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
- vdda-supply = <&pm8994_l28>;
-
linux,pci-domain = <2>;
clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
<&gcc GCC_PCIE_2_AUX_CLK>,
@@ -2015,7 +1998,7 @@
{
compatible = "qcom,bam-v1.7.0";
qcom,controlled-remotely;
- reg = <0x9184000 0x32000>;
+ reg = <0x09184000 0x32000>;
num-channels = <31>;
interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
@@ -2025,7 +2008,7 @@
slim_msm: slim@91c0000 {
compatible = "qcom,slim-ngd-v1.5.0";
- reg = <0x91c0000 0x2C000>;
+ reg = <0x091c0000 0x2C000>;
reg-names = "ctrl";
interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&slimbam 3>, <&slimbam 4>,
@@ -2060,12 +2043,6 @@
slim-ifc-dev = <&tasha_ifd>;
- vdd-buck-supply = <&pm8994_s4>;
- vdd-buck-sido-supply = <&pm8994_s4>;
- vdd-tx-supply = <&pm8994_s4>;
- vdd-rx-supply = <&pm8994_s4>;
- vdd-io-supply = <&pm8994_s4>;
-
#sound-dai-cells = <1>;
};
};
@@ -2075,7 +2052,7 @@
compatible = "qcom,adreno-530.2", "qcom,adreno";
#stream-id-cells = <16>;
- reg = <0xb00000 0x3f000>;
+ reg = <0x00b00000 0x3f000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
@@ -2146,9 +2123,9 @@
mdss: mdss@900000 {
compatible = "qcom,mdss";
- reg = <0x900000 0x1000>,
- <0x9b0000 0x1040>,
- <0x9b8000 0x1040>;
+ reg = <0x00900000 0x1000>,
+ <0x009b0000 0x1040>,
+ <0x009b8000 0x1040>;
reg-names = "mdss_phys",
"vbif_phys",
"vbif_nrt_phys";
@@ -2168,7 +2145,7 @@
mdp: mdp@901000 {
compatible = "qcom,mdp5";
- reg = <0x901000 0x90000>;
+ reg = <0x00901000 0x90000>;
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
@@ -2244,12 +2221,12 @@
hdmi_phy: hdmi-phy@9a0600 {
#phy-cells = <0>;
compatible = "qcom,hdmi-phy-8996";
- reg = <0x9a0600 0x1c4>,
- <0x9a0a00 0x124>,
- <0x9a0c00 0x124>,
- <0x9a0e00 0x124>,
- <0x9a1000 0x124>,
- <0x9a1200 0x0c8>;
+ reg = <0x009a0600 0x1c4>,
+ <0x009a0a00 0x124>,
+ <0x009a0c00 0x124>,
+ <0x009a0e00 0x124>,
+ <0x009a1000 0x124>,
+ <0x009a1200 0x0c8>;
reg-names = "hdmi_pll",
"hdmi_tx_l0",
"hdmi_tx_l1",
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index dcb79003ca0e..9cb7163c5714 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1396,9 +1396,11 @@
cpu = <&CPU4>;
- port{
- etm4_out: endpoint {
- remote-endpoint = <&apss_funnel_in4>;
+ out-ports {
+ port{
+ etm4_out: endpoint {
+ remote-endpoint = <&apss_funnel_in4>;
+ };
};
};
};
@@ -1413,9 +1415,11 @@
cpu = <&CPU5>;
- port{
- etm5_out: endpoint {
- remote-endpoint = <&apss_funnel_in5>;
+ out-ports {
+ port{
+ etm5_out: endpoint {
+ remote-endpoint = <&apss_funnel_in5>;
+ };
};
};
};
@@ -1430,9 +1434,11 @@
cpu = <&CPU6>;
- port{
- etm6_out: endpoint {
- remote-endpoint = <&apss_funnel_in6>;
+ out-ports {
+ port{
+ etm6_out: endpoint {
+ remote-endpoint = <&apss_funnel_in6>;
+ };
};
};
};
@@ -1447,9 +1453,11 @@
cpu = <&CPU7>;
- port{
- etm7_out: endpoint {
- remote-endpoint = <&apss_funnel_in7>;
+ out-ports {
+ port{
+ etm7_out: endpoint {
+ remote-endpoint = <&apss_funnel_in7>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index ca77fc8aa75b..b4a0234f66d1 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2501,10 +2501,10 @@
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
@@ -2545,10 +2545,10 @@
<&gcc GCC_USB30_SEC_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
@@ -2940,6 +2940,15 @@
#power-domain-cells = <1>;
};
+ pdc_intc: interrupt-controller@b220000 {
+ compatible = "qcom,sdm845-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>;
+ qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
pdc_reset: reset-controller@b2e0000 {
compatible = "qcom,sdm845-pdc-global";
reg = <0 0x0b2e0000 0 0x20000>;
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-27 22:35:33 +0000