diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm6375.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm6375.dtsi | 84 |
1 files changed, 77 insertions, 7 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index e7ff55443da7..7ac8bf26dda3 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -311,6 +311,25 @@ }; }; + mpm: interrupt-controller { + compatible = "qcom,mpm"; + qcom,rpm-msg-ram = <&apss_mpm>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>; + interrupt-controller; + #interrupt-cells = <2>; + #power-domain-cells = <0>; + interrupt-parent = <&intc>; + qcom,mpm-pin-count = <96>; + qcom,mpm-pin-map = <5 296>, /* Soundwire wake_irq */ + <12 422>, /* DWC3 ss_phy_irq */ + <86 183>, /* MPM wake, SPMI */ + <89 314>, /* TSENS0 0C */ + <90 315>, /* TSENS1 0C */ + <93 164>, /* DWC3 dm_hs_phy_irq */ + <94 165>; /* DWC3 dp_hs_phy_irq */ + }; + memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -486,6 +505,7 @@ CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; + power-domains = <&mpm>; domain-idle-states = <&CLUSTER_SLEEP_0>; }; }; @@ -808,7 +828,7 @@ reg = <0 0x00500000 0 0x800000>; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&tlmm 0 0 157>; - /* TODO: Hook up MPM as wakeup-parent when it's there */ + wakeup-parent = <&mpm>; interrupt-controller; gpio-controller; #interrupt-cells = <2>; @@ -896,6 +916,36 @@ drive-strength = <6>; bias-disable; }; + + qup_uart1_default: qup-uart1-default-state { + cts-pins { + pins = "gpio61"; + function = "qup01"; + drive-strength = <2>; + bias-pull-down; + }; + + rts-pins { + pins = "gpio62"; + function = "qup01"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio63"; + function = "qup01"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio64"; + function = "qup01"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; gcc: clock-controller@1400000 { @@ -930,7 +980,7 @@ <0 0x01c0a000 0 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; @@ -962,8 +1012,15 @@ }; rpm_msg_ram: sram@45f0000 { - compatible = "qcom,rpm-msg-ram"; + compatible = "qcom,rpm-msg-ram", "mmio-sram"; reg = <0 0x045f0000 0 0x7000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x045f0000 0x7000>; + + apss_mpm: sram@1b8 { + reg = <0x1b8 0x48>; + }; }; sram@4690000 { @@ -1111,6 +1168,19 @@ status = "disabled"; }; + uart1: serial@4a84000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + power-domains = <&rpmpd SM6375_VDDCX>; + operating-points-v2 = <&qup_opp_table>; + pinctrl-0 = <&qup_uart1_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + i2c2: i2c@4a88000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a88000 0x0 0x4000>; @@ -1360,10 +1430,10 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <133333333>; - interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <&mpm 12 IRQ_TYPE_LEVEL_HIGH>, + <&mpm 93 IRQ_TYPE_EDGE_BOTH>, + <&mpm 94 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", |