diff options
Diffstat (limited to 'arch/arm/boot/dts')
24 files changed, 88 insertions, 47 deletions
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 2625ce66f8e7..673c6e5b2f56 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -435,7 +435,7 @@ /* Direct-mapped development chip ROM */ pb1176_rom@10200000 { - compatible = "direct-mapped"; + compatible = "mtd-rom"; reg = <0x10200000 0x4000>; bank-width = <1>; }; diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts index 5833fb6f15d8..2c817c4a4c68 100644 --- a/arch/arm/boot/dts/imx1-ads.dts +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -65,7 +65,7 @@ pinctrl-0 = <&pinctrl_weim>; status = "okay"; - nor: nor@0,0 { + nor: flash@0,0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <4>; diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts index 77b21aa7a146..27e72b07b517 100644 --- a/arch/arm/boot/dts/imx1-apf9328.dts +++ b/arch/arm/boot/dts/imx1-apf9328.dts @@ -45,7 +45,7 @@ pinctrl-0 = <&pinctrl_weim>; status = "okay"; - nor: nor@0,0 { + nor: flash@0,0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <2>; diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index b30448cde582..a74870d03a67 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -268,9 +268,12 @@ status = "disabled"; }; - esram: esram@300000 { + esram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x20000>; + ranges = <0 0x00300000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; }; }; }; diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts index 46057d9bf555..c2efcc20ae80 100644 --- a/arch/arm/boot/dts/imx23-sansa.dts +++ b/arch/arm/boot/dts/imx23-sansa.dts @@ -175,10 +175,8 @@ #address-cells = <1>; #size-cells = <0>; compatible = "i2c-gpio"; - gpios = < - &gpio1 24 0 /* SDA */ - &gpio1 22 0 /* SCL */ - >; + sda-gpios = <&gpio1 24 0>; + scl-gpios = <&gpio1 22 0>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ }; @@ -186,10 +184,8 @@ #address-cells = <1>; #size-cells = <0>; compatible = "i2c-gpio"; - gpios = < - &gpio0 31 0 /* SDA */ - &gpio0 30 0 /* SCL */ - >; + sda-gpios = <&gpio0 31 0>; + scl-gpios = <&gpio0 30 0>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ touch: touch@20 { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 42700d7f8bf7..ba1705595b29 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -406,7 +406,7 @@ status = "disabled"; }; - dma_apbx: dma-apbx@80024000 { + dma_apbx: dma-controller@80024000 { compatible = "fsl,imx23-dma-apbx"; reg = <0x80024000 0x2000>; interrupts = <7 5 9 26 diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi index 0703f62d10d1..93a6e4e680b4 100644 --- a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi +++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi @@ -27,7 +27,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pcf8563@51 { + rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts index 7d4301b22b90..1ed3fb7b9ce6 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts @@ -16,7 +16,7 @@ bus-width = <18>; display-timings { native-mode = <&qvga_timings>; - qvga_timings: 320x240 { + qvga_timings: timing0 { clock-frequency = <6500000>; hactive = <320>; vactive = <240>; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts index 80a7f96de4c6..64b2ffac463b 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts @@ -16,7 +16,7 @@ bus-width = <18>; display-timings { native-mode = <&dvi_svga_timings>; - dvi_svga_timings: 800x600 { + dvi_svga_timings: timing0 { clock-frequency = <40000000>; hactive = <800>; vactive = <600>; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts index 24027a1fb46d..fb074bfdaa8d 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts @@ -16,7 +16,7 @@ bus-width = <18>; display-timings { native-mode = <&dvi_vga_timings>; - dvi_vga_timings: 640x480 { + dvi_vga_timings: timing0 { clock-frequency = <31250000>; hactive = <640>; vactive = <480>; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index 05cccd12624c..876b101ce3e6 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -78,7 +78,7 @@ bus-width = <18>; display-timings { native-mode = <&wvga_timings>; - wvga_timings: 640x480 { + wvga_timings: timing0 { hactive = <640>; vactive = <480>; hback-porch = <45>; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index 6f1e8ce9e76e..3d9bb7fc3be2 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -16,7 +16,7 @@ fsl,pcr = <0xfae80083>; /* non-standard but required */ display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing0 { clock-frequency = <33000033>; hactive = <800>; vactive = <480>; @@ -47,7 +47,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_leds>; - user { + led-user { label = "Heartbeat"; gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi index 74110bbcd9d4..c7e923584878 100644 --- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi +++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi @@ -33,7 +33,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pcf8563@51 { + rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; @@ -90,7 +90,7 @@ &weim { status = "okay"; - nor: nor@0,0 { + nor: flash@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts index 9c3ec82ec7e5..50fa0bd4c8a1 100644 --- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts +++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts @@ -16,7 +16,7 @@ display-timings { native-mode = <&timing0>; - timing0: 320x240 { + timing0: timing0 { clock-frequency = <6500000>; hactive = <320>; vactive = <240>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts index 188639738dc3..7f36af150a25 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -19,7 +19,7 @@ fsl,pcr = <0xf0c88080>; /* non-standard but required */ display-timings { native-mode = <&timing0>; - timing0: 640x480 { + timing0: timing0 { hactive = <640>; vactive = <480>; hback-porch = <112>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index bf883e45576a..39e0fcb12d23 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -19,7 +19,7 @@ display-timings { native-mode = <&timing0>; - timing0: 240x320 { + timing0: timing0 { clock-frequency = <5500000>; hactive = <240>; vactive = <320>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index 3d10273177e9..a5fdc2fd4ce5 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -322,7 +322,7 @@ &weim { status = "okay"; - nor: nor@0,0 { + nor: flash@0,0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <2>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 3652f5556b29..eb0dac710044 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -588,6 +588,9 @@ iram: iram@ffff4c00 { compatible = "mmio-sram"; reg = <0xffff4c00 0xb400>; + ranges = <0 0xffff4c00 0xb400>; + #address-cells = <1>; + #size-cells = <1>; }; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 235c69bd181f..26dc6c9e1e6c 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -982,7 +982,7 @@ status = "disabled"; }; - dma_apbx: dma-apbx@80024000 { + dma_apbx: dma-controller@80024000 { compatible = "fsl,imx28-dma-apbx"; reg = <0x80024000 0x2000>; interrupts = <78 79 66 0 diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index ce4a5a807442..68af441e7894 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -96,8 +96,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - phy-reset-duration = <20>; phy-supply = <&sw2_reg>; status = "okay"; @@ -110,17 +108,10 @@ #address-cells = <1>; #size-cells = <0>; - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - switch@10 { compatible = "qca,qca8334"; - reg = <10>; + reg = <0x10>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; switch_ports: ports { #address-cells = <1>; @@ -141,15 +132,30 @@ port@2 { reg = <2>; label = "eth2"; + phy-mode = "internal"; phy-handle = <&phy_port2>; }; port@3 { reg = <3>; label = "eth1"; + phy-mode = "internal"; phy-handle = <&phy_port3>; }; }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port2: ethernet-phy@1 { + reg = <1>; + }; + + phy_port3: ethernet-phy@2 { + reg = <2>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 8b65ca8b5f30..2b9d0b1bd982 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -204,9 +204,6 @@ }; &ca_funnel_in_ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { reg = <1>; ca_funnel_in_port1: endpoint { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 7ce541fcac76..8e86841ef4e6 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -183,7 +183,11 @@ clock-names = "apb_pclk"; ca_funnel_in_ports: in-ports { - port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; ca_funnel_in_port0: endpoint { remote-endpoint = <&etm0_out_port>; }; @@ -765,7 +769,7 @@ }; lcdif: lcdif@30730000 { - compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; + compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif"; reg = <0x30730000 0x10000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, @@ -1213,7 +1217,7 @@ gpmi: gpmi-nand@33002000{ compatible = "fsl,imx7d-gpmi-nand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; reg = <0x33002000 0x2000>, <0x33004000 0x4000>; reg-names = "gpmi-nand", "bch"; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index d282a7b638d8..cc2d596da7d4 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -337,12 +337,20 @@ pinctrl-0 = <&hdmi_ctl>; status = "disabled"; - hdmi_in: port { + ports { #address-cells = <1>; #size-cells = <0>; - hdmi_in_vop: endpoint@0 { + + hdmi_in: port@0 { reg = <0>; - remote-endpoint = <&vop_out_hdmi>; + + hdmi_in_vop: endpoint { + remote-endpoint = <&vop_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; }; }; }; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 4c6704e4c57e..74d5732c412b 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -62,6 +62,30 @@ states = <1100000 0>, <1300000 1>; }; + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + vin-supply = <®_vcc5v0>; + }; + + reg_vcc1v2: vcc1v2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + vin-supply = <®_vcc5v0>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ |