Age | Commit message (Collapse) | Author |
|
Pulls should be in the board files, not in the SoC dtsi
file. Remove. Even though the sc7280 boards don't currently refer to
dp_hot_plug_det, let's re-add the pulls there just to keep this as a
no-op change. If boards don't need this / don't want it later then we
can remove it from them.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220202132301.v3.10.Id346b23642f91e16d68d75f44bcdb5b9fbd155ea@changeid
|
|
Pullups and drive strength don't belong in the SoC dtsi file. Move to
the board file.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220202132301.v3.8.Iffff0c12440a047212a164601e637b03b9d2fc78@changeid
|
|
Specifying "input-enable" on a MSM GPIO is a no-op for the most
part. The only thing it really does is to explicitly force the output
of a GPIO to be disabled right at the point of a pinctrl
transition. We don't need to do this and we don't typically specify
"input-enable" unless there's a good reason to. Remove it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220202132301.v3.5.Ibaf8a803802beb089cc6266b37e6156cff3ddaec@changeid
|
|
This patch makes a few improvements to the way that sdc1 / sdc2
pinctrl is specified on sc7280:
1. There's no reason to "group" the sdc pins into one overarching node
and there's a downside: we have to replicate the hierarchy in the
board device tree files. Let's clean this up.
2. There's really not a lot of reason not to list the "pinctrl" for
sdc1 (eMMC) in the SoC dtsi file. These aren't GPIO pins and
everyone's going to specify the same pins.
3. Even though it's likely that boards will need to override pinctrl
for sdc2 (SD card) to add the card detect GPIO, we can be symmetric
and add it to the SoC dsti file.
4. Let's get rid of the word "on" from the normal config and add a
"sleep" suffix to the sleep config. This looks cleaner to me.
This is intended to be a no-op change but it could plausibly change
behavior depending on how the pinctrl code parses things. One thing to
note is that "SD card detect" is explicitly listed now as keeping its
pull enabled in sleep since we still want to detect card insertions
even if the controller is suspended (because no card is inserted). The
pinctrl framework likely did this anyway, but it's nice to see it
explicit.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220202132301.v3.4.I79baad7f52351aafb470f8b21a9fa79d7031ad6a@changeid
|
|
Though sc7280 itself doesn't need any of the defines in gpio.h, it's
highly likely that the actual boards will use them. Let's add the
include to the sc7280.dtsi file so that boards don't need to do it.
Suggested-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125144316.v2.4.I3194c8bdb2ad3212665286fa273710a3c4840e94@changeid
|
|
This factors out a device tree fragment from some sc7280 device
trees. It represents the device tree bits that should be included for
"Chrome" based sc7280 boards. On these boards the bootloader (Coreboot
+ Depthcharge) configures things slightly different than the
bootloader that Qualcomm provides. The modem firmware on these boards
also works differently than on other Qulacomm products and thus the
reserved memory map needs to be adjusted.
NOTES:
- This is _not_ quite a no-op change. The "herobrine" and "idp"
fragments here were different and it looks like someone simply
forgot to update the herobrine version. This updates a few numbers
to match IDP. This will also cause the `pmk8350_pon` to be disabled
on idp/crd, which I belive is a correct change.
- At the moment this assumes LTE skus. Once it's clearer how WiFi SKUs
will work (how much of the memory map they can reclaim) we may add
an extra fragment that will rejigger one way or the other.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125144316.v2.3.Iac012fa8d727be46448d47027a1813ea716423ce@changeid
|
|
Move USB2 controller and phy nodes from common dtsi file as it is
required only for SKU1 board and change the mode to host mode as
it will be used in host mode for SKU1.
Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1638422248-24221-1-git-send-email-quic_c_sanm@quicinc.com
|
|
Add bluetooth SoC WCN6750 node for SC7280 IDP boards.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1639587963-22503-1-git-send-email-bgodavar@codeaurora.org
|
|
Enable PCIe controller and PHY for sc7280 IDP board.
Add specific NVMe GPIO entries for SKU1 and SKU2 support.
Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1633628923-25047-4-git-send-email-pmaliset@codeaurora.org
|
|
Update MSS node to support MSA based modem boot on SC7280 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631886935-14691-11-git-send-email-sibis@codeaurora.org
|
|
Add, delete and update platform specific reserved memory nodes.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631886935-14691-8-git-send-email-sibis@codeaurora.org
|
|
Add QUPv3 wrapper_1 DT nodes for SC7280 SoC.
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1632399378-12229-8-git-send-email-rajpat@codeaurora.org
|
|
Add bluetooth uart pin configuration for sc7280-idp.
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1632399378-12229-7-git-send-email-rajpat@codeaurora.org
|
|
Uart5 is treated as dedicated debug uart.Change the
compatible as "qcom,geni-uart" in SoC DT to make it generic
and later update it as "qcom,geni-debug-uart" in sc7280-idp
Add interconnects and power-domains. Split the pinctrl
functions and correct the gpio pins.
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1632399378-12229-6-git-send-email-rajpat@codeaurora.org
|
|
Add spi-nor flash node and pinctrl configurations for the SC7280 IDP.
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1632399378-12229-4-git-send-email-rajpat@codeaurora.org
|
|
Add pm7325 PMIC gpio support for vol+ on sc7280-idp.
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631877040-26587-1-git-send-email-skakit@codeaurora.org
|
|
There's nothing magical about GPIO91 and boards could use different
GPIOs for card detect. Move the pin out of the dtsi file and to the
only existing board file.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210830080621.1.Ia15d97bc4a81f2916290e23a8fde9cbc66186159@changeid
|
|
Add vcc-supply for the IDP boards that was missed when the
qfprom device tree properties were added for the sc7280 SoC.
Fixes: c1b2189a19cf ("arm64: dts: qcom: sc7280: Add qfprom node")
Reported-by: satya priya <skakit@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631530735-19811-1-git-send-email-rnayak@codeaurora.org
|
|
Move all the common device tree bits for both sc7280 IDPs into a
sc7280-idp.dtsi and create 2 different dts files (sc7280-idp.dts
and sc7280-idp2.dts) in order to manage differences across the
IDP SKU1 and SKU2 Boards.
PMR735A is present on IDP board only and is not present on IDP2.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/1628082199-17002-3-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|