summaryrefslogtreecommitdiffstats
path: root/drivers/block/paride/epat.c
blob: 1bcdff77322effc30fc679596a01762f9d2672a0 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
/* 
        epat.c  (c) 1997-8  Grant R. Guenther <grant@torque.net>
                            Under the terms of the GNU General Public License.

	This is the low level protocol driver for the EPAT parallel
        to IDE adapter from Shuttle Technologies.  This adapter is
        used in many popular parallel port disk products such as the
        SyQuest EZ drives, the Avatar Shark and the Imation SuperDisk.
	
*/

/* Changes:

        1.01    GRG 1998.05.06 init_proto, release_proto
        1.02    Joshua b. Jore CPP(renamed), epat_connect, epat_disconnect

*/

#define EPAT_VERSION      "1.02"

#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>

#include "paride.h"

#define j44(a,b)		(((a>>4)&0x0f)+(b&0xf0))
#define j53(a,b)		(((a>>3)&0x1f)+((b<<4)&0xe0))

static int epatc8;

module_param(epatc8, int, 0);
MODULE_PARM_DESC(epatc8, "support for the Shuttle EP1284 chip, "
	"used in any recent Imation SuperDisk (LS-120) drive.");

/* cont =  0   IDE register file
   cont =  1   IDE control registers
   cont =  2   internal EPAT registers
*/

static int cont_map[3] = { 0x18, 0x10, 0 };

static void epat_write_regr( PIA *pi, int cont, int regr, int val)

{	int r;

	r = regr + cont_map[cont];

	switch (pi->mode) {

	case 0:
	case 1:
	case 2:	w0(0x60+r); w2(1); w0(val); w2(4);
		break;

	case 3:
	case 4:
	case 5: w3(0x40+r); w4(val);
		break;

	}
}

static int epat_read_regr( PIA *pi, int cont, int regr )

{	int  a, b, r;

	r = regr + cont_map[cont];

	switch (pi->mode) {

	case 0:	w0(r); w2(1); w2(3); 
		a = r1(); w2(4); b = r1();
		return j44(a,b);

	case 1: w0(0x40+r); w2(1); w2(4);
		a = r1(); b = r2(); w0(0xff);
		return j53(a,b);

	case 2: w0(0x20+r); w2(1); w2(0x25);
		a = r0(); w2(4);
		return a;

	case 3:
	case 4:
	case 5: w3(r); w2(0x24); a = r4(); w2(4);
		return a;

	}
	return -1;	/* never gets here */
}

static void epat_read_block( PIA *pi, char * buf, int count )

{	int  k, ph, a, b;

	switch (pi->mode) {

	case 0:	w0(7); w2(1); w2(3); w0(0xff);
		ph = 0;
		for(k=0;k<count;k++) {
			if (k == count-1) w0(0xfd);
			w2(6+ph); a = r1();
			if (a & 8) b = a; 
			  else { w2(4+ph); b = r1(); }
			buf[k] = j44(a,b);
			ph =  1 - ph;
		}
		w0(0); w2(4);
		break;

	case 1: w0(0x47); w2(1); w2(5); w0(0xff);
		ph = 0;
		for(k=0;k<count;k++) {
			if (k == count-1) w0(0xfd); 
			w2(4+ph);
			a = r1(); b = r2();
			buf[k] = j53(a,b);
			ph = 1 - ph;
		}
		w0(0); w2(4);
		break;

	case 2: w0(0x27); w2(1); w2(0x25); w0(0);
		ph = 0;
		for(k=0;k<count-1;k++) {
			w2(0x24+ph);
			buf[k] = r0();
			ph = 1 - ph;
		}
		w2(0x26); w2(0x27); buf[count-1] = r0(); 
		w2(0x25); w2(4);
		break;

	case 3: w3(0x80); w2(0x24);
		for(k=0;k<count-1;k++) buf[k] = r4();
		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
		w2(4);
		break;

	case 4: w3(0x80); w2(0x24);
		for(k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
		buf[count-2] = r4();
		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
		w2(4);
		break;

	case 5: w3(0x80); w2(0x24);
		for(k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
		for(k=count-4;k<count-1;k++) buf[k] = r4();
		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
		w2(4);
		break;

	}
}

static void epat_write_block( PIA *pi, char * buf, int count )   

{	int ph, k;

	switch (pi->mode) {

	case 0:
	case 1:
	case 2: w0(0x67); w2(1); w2(5);
		ph = 0;
		for(k=0;k<count;k++) {
		  	w0(buf[k]);
			w2(4+ph);
			ph = 1 - ph;
		}
		w2(7); w2(4);
		break;

	case 3: w3(0xc0); 
		for(k=0;k<count;k++) w4(buf[k]);
		w2(4);
		break;

	case 4: w3(0xc0); 
		for(k=0;k<(count/2);k++) w4w(((u16 *)buf)[k]);
		w2(4);
		break;

	case 5: w3(0xc0); 
		for(k=0;k<(count/4);k++) w4l(((u32 *)buf)[k]);
		w2(4);
		break;

	}
}

/* these macros access the EPAT registers in native addressing */

#define	WR(r,v)		epat_write_regr(pi,2,r,v)
#define	RR(r)		(epat_read_regr(pi,2,r))

/* and these access the IDE task file */

#define WRi(r,v)         epat_write_regr(pi,0,r,v)
#define RRi(r)           (epat_read_regr(pi,0,r))

/* FIXME:  the CPP stuff should be fixed to handle multiple EPATs on a chain */

#define CPP(x) 	w2(4);w0(0x22);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
                w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);

static void epat_connect ( PIA *pi )

{       pi->saved_r0 = r0();
        pi->saved_r2 = r2();

 	/* Initialize the chip */
	CPP(0);

	if (epatc8) {
		CPP(0x40);CPP(0xe0);
		w0(0);w2(1);w2(4);
		WR(0x8,0x12);WR(0xc,0x14);WR(0x12,0x10);
		WR(0xe,0xf);WR(0xf,4);
		/* WR(0xe,0xa);WR(0xf,4); */
		WR(0xe,0xd);WR(0xf,0);
		/* CPP(0x30); */
	}

        /* Connect to the chip */
	CPP(0xe0);
        w0(0);w2(1);w2(4); /* Idle into SPP */
        if (pi->mode >= 3) {
          w0(0);w2(1);w2(4);w2(0xc);
          /* Request EPP */
          w0(0x40);w2(6);w2(7);w2(4);w2(0xc);w2(4);
        }

	if (!epatc8) {
		WR(8,0x10); WR(0xc,0x14); WR(0xa,0x38); WR(0x12,0x10);
	}
}

static void epat_disconnect (PIA *pi)
{	CPP(0x30);
	w0(pi->saved_r0);
	w2(pi->saved_r2);
}

static int epat_test_proto( PIA *pi, char * scratch, int verbose )

{       int     k, j, f, cc;
	int	e[2] = {0,0};

        epat_connect(pi);
	cc = RR(0xd);
	epat_disconnect(pi);

	epat_connect(pi);
	for (j=0;j<2;j++) {
  	    WRi(6,0xa0+j*0x10);
            for (k=0;k<256;k++) {
                WRi(2,k^0xaa);
                WRi(3,k^0x55);
                if (RRi(2) != (k^0xaa)) e[j]++;
                }
	    }
        epat_disconnect(pi);

        f = 0;
        epat_connect(pi);
        WR(0x13,1); WR(0x13,0); WR(0xa,0x11);
        epat_read_block(pi,scratch,512);
	
        for (k=0;k<256;k++) {
            if ((scratch[2*k] & 0xff) != k) f++;
            if ((scratch[2*k+1] & 0xff) != (0xff-k)) f++;
        }
        epat_disconnect(pi);

        if (verbose)  {
            printk("%s: epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
		   pi->device,pi->port,pi->mode,cc,e[0],e[1],f);
	}
	
        return (e[0] && e[1]) || f;
}

static void epat_log_adapter( PIA *pi, char * scratch, int verbose )

{	int	ver;
        char    *mode_string[6] = 
		   {"4-bit","5/3","8-bit","EPP-8","EPP-16","EPP-32"};

	epat_connect(pi);
	WR(0xa,0x38);		/* read the version code */
        ver = RR(0xb);
        epat_disconnect(pi);

	printk("%s: epat %s, Shuttle EPAT chip %x at 0x%x, ",
		pi->device,EPAT_VERSION,ver,pi->port);
	printk("mode %d (%s), delay %d\n",pi->mode,
		mode_string[pi->mode],pi->delay);

}

static struct pi_protocol epat = {
	.owner		= THIS_MODULE,
	.name		= "epat",
	.max_mode	= 6,
	.epp_first	= 3,
	.default_delay	= 1,
	.max_units	= 1,
	.write_regr	= epat_write_regr,
	.read_regr	= epat_read_regr,
	.write_block	= epat_write_block,
	.read_block	= epat_read_block,
	.connect	= epat_connect,
	.disconnect	= epat_disconnect,
	.test_proto	= epat_test_proto,
	.log_adapter	= epat_log_adapter,
};

static int __init epat_init(void)
{
#ifdef CONFIG_PARIDE_EPATC8
	epatc8 = 1;
#endif
	return paride_register(&epat);
}

static void __exit epat_exit(void)
{
	paride_unregister(&epat);
}

MODULE_LICENSE("GPL");
module_init(epat_init)
module_exit(epat_exit)