aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/mpt3sas
AgeCommit message (Collapse)Author
2016-08-12mpt3sas: Fix resume on WarpDrive flash cardsGreg Edwards
mpt3sas crashes on resume after suspend with WarpDrive flash cards. The reply_post_host_index array is not set back up after the resume, and we deference a stale pointer in _base_interrupt(). [ 47.309711] BUG: unable to handle kernel paging request at ffffc90001f8006c [ 47.318289] IP: [<ffffffffc00863ef>] _base_interrupt+0x49f/0xa30 [mpt3sas] [ 47.326749] PGD 41ccaa067 PUD 41ccab067 PMD 3466c067 PTE 0 [ 47.333848] Oops: 0002 [#1] SMP ... [ 47.452708] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.7.0 #6 [ 47.460506] Hardware name: Dell Inc. OptiPlex 990/06D7TR, BIOS A18 09/24/2013 [ 47.469629] task: ffffffff81c0d500 ti: ffffffff81c00000 task.ti: ffffffff81c00000 [ 47.479112] RIP: 0010:[<ffffffffc00863ef>] [<ffffffffc00863ef>] _base_interrupt+0x49f/0xa30 [mpt3sas] [ 47.490466] RSP: 0018:ffff88041d203e30 EFLAGS: 00010002 [ 47.497801] RAX: 0000000000000001 RBX: ffff880033f4c000 RCX: 0000000000000001 [ 47.506973] RDX: ffffc90001f8006c RSI: 0000000000000082 RDI: 0000000000000082 [ 47.516141] RBP: ffff88041d203eb0 R08: ffff8804118e2820 R09: 0000000000000001 [ 47.525300] R10: 0000000000000001 R11: 00000000100c0000 R12: 0000000000000000 [ 47.534457] R13: ffff880412c487e0 R14: ffff88041a8987d8 R15: 0000000000000001 [ 47.543632] FS: 0000000000000000(0000) GS:ffff88041d200000(0000) knlGS:0000000000000000 [ 47.553796] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.561632] CR2: ffffc90001f8006c CR3: 0000000001c06000 CR4: 00000000000406f0 [ 47.570883] Stack: [ 47.575015] 000000001d211228 ffff88041d2100c0 ffff8800c47d8130 0000000000000100 [ 47.584625] ffff8804100c0000 100c000000000000 ffff88041a8992a0 ffff88041a8987f8 [ 47.594230] ffff88041d203e00 ffffffff81111e55 000000000000038c ffff880414ad4280 [ 47.603862] Call Trace: [ 47.608474] <IRQ> [ 47.610413] [<ffffffff81111e55>] ? call_timer_fn+0x35/0x120 [ 47.620539] [<ffffffff81100a1f>] handle_irq_event_percpu+0x7f/0x1c0 [ 47.629061] [<ffffffff81100b8c>] handle_irq_event+0x2c/0x50 [ 47.636859] [<ffffffff81103fff>] handle_edge_irq+0x6f/0x130 [ 47.644654] [<ffffffff8102fbf3>] handle_irq+0x73/0x120 [ 47.652011] [<ffffffff810c6ada>] ? atomic_notifier_call_chain+0x1a/0x20 [ 47.660854] [<ffffffff817e374b>] do_IRQ+0x4b/0xd0 [ 47.667777] [<ffffffff817e160c>] common_interrupt+0x8c/0x8c [ 47.675635] <EOI> Move the reply_post_host_index array setup into mpt3sas_base_map_resources(), which is also in the resume path. Cc: stable@vger.kernel.org Signed-off-by: Greg Edwards <gedwards@fireweed.org> Acked-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15mpt3sas: Fix panic when aer correct error occurredKefeng Wang
The _scsih_pci_mmio_enabled called if scsih_pci_error_detected returns PCI_ERS_RESULT_CAN_RECOVER, at this point, read/write to the device still works, no need to reset slot. Or the mpt3sas_base_map_resources in scsih_pci_slot_reset will fail, and iounamp ioc->chip, then we will meet issue when read ioc->chip in mpt3sas_base_get_iocstate from _base_fault_reset_work. Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Chaitra P B <chaitra.basappa@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-12mpt3sas: avoid mpt3sas_transport_port_add NULL parent_devJoe Lawrence
If _scsih_sas_host_add's call to mpt3sas_config_get_sas_iounit_pg0 fails, ioc->sas_hba.parent_dev may be left uninitialized. A later device probe could invoke mpt3sas_transport_port_add which will call sas_port_alloc_num [scsi_transport_sas] with a NULL parent_dev pointer. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-12mpt3sas: set num_phys after allocating phy[] spaceJoe Lawrence
In _scsih_sas_host_add, the number of HBA phys are determined and then later used to allocate an array of struct _sas_phy's. If the routine sets ioc->sas_hba.num_phys, but then fails to allocate the ioc->sas_hba.phy array (by kcalloc error or other intermediate error/exit path), ioc->sas_hba is left in a dangerous state: all readers of ioc->sas_hba.phy[] do so by indexing it from 0..ioc->sas_hba.num_phys without checking that the space was ever allocated. Modify _scsih_sas_host_add to set ioc->sas_hba.num_phys only after successfully allocating ioc->sas_hba.phy[]. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-22mpt3sas: add missing curly bracesDan Carpenter
There are some missing curly braces on this if statement, so we end up printing when we shouldn't. Fixes: a470a51cd648 ('mpt3sas: Handle active cable exception event') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-11mpt3sas: Used "synchronize_irq()"API to synchronize timed-out IO & TMsChaitra P B
Replaced mpt3sas_base_flush_reply_queues() with mpt3sas_base_sync_reply_irqs(),as mpt3sas_base_flush_reply_queues() skips over reply queues that are currently busy (i.e. being handled by interrupt processing in another core). If a reply queue is busy, then call to synchronize_irq()in mpt3sas_base_sync_reply_irqs()make sures the other core has finished flushing the queue and completed any calls to the mid-layer scsi_done() routine. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-11mpt3sas: Set maximum transfer length per IO to 4MB for VDsChaitra P B
Set maximum transfer length per IO on RAID volumes to 4MB by setting VD's queue's max_sector to 8192. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-11mpt3sas: Updating mpt3sas driver version to 13.100.00.00Chaitra P B
Bump mpt3sas driver version from 12.100.00.00 to 13.100.00.00 Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-11mpt3sas: Fix initial Reference tag field for 4K PI drives.Chaitra P B
Modified driver code to use scsi_prot_ref_tag() API instead of scsi_get_lba(), while initializing reference tag field in the CDB. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-11mpt3sas: Handle active cable exception eventChaitra P B
In-order to handle this 'MPI2_EVENT_ACTIVE_CABLE_EXCEPTION' event, driver need to follow below steps, 1. Unmask the 'MPI2_EVENT_ACTIVE_CABLE_EXCEPTION' event, so that FW can notify this event to host driver. 2. After receiving this event, add this event to AEN event queue, for notifying this event to applications. 3. Then Print below message in kernel logs if the event data's reason code is zero, "Currently an active cable with ReceptacleID <ID_Value> cannot be powered and devices connected to this active cable will not be seen. This active cable requires <PowerValue_in_mW> of power" This event is only for Intruder/Cutlass HBAs. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-11mpt3sas: Update MPI header to 2.00.42Chaitra P B
Updated MPI version and MPI header files. ChangeList: * Added SATADeviceWaitTime to SAS IO Unit Page 4 * Added EEDPObservedValue added to SCSI IO Reply message * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-25mpt3sas - remove unused fw_event_work elementsJoe Lawrence
Firmware events are queued up using the fw_event_work's struct work, not its delayed_work member. The initial driver for SAS2 controllers had handled firmware reset using the rescan barrier and was later redesigned through "mpt2sas: [Resend] Host Reset code cleanup". The delayed_work variables are now unused and may provoke CONFIG_DEBUG_OBJECTS_TIMERS "assert_init not available" false warnings in _scsih_fw_event_cleanup_queue. Cleanup fw_event_work's unused entries, update its kerneldoc, and update _scsih_fw_event_cleanup_queue accordingly. Fixes: 146b16c8071f (mpt3sas: Refcount fw_events and fix unsafe list usage) Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15mpt3sas: Remove usage of 'struct timeval'Tina Ruchandani
'struct timeval' will have its tv_sec value overflow on 32-bit systems in year 2038 and beyond. This patch replaces the use of struct timeval for computing mpi_request.TimeStamp, and instead uses ktime_t which provides 64-bit seconds value. The timestamp computed remains unaffected (milliseconds since Unix epoch). Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15scsi: rename SCSI_MAX_{SG, SG_CHAIN}_SEGMENTSMing Lin
Rename SCSI_MAX_SG_SEGMENTS to SG_CHUNK_SIZE, which means the amount we fit into a single scatterlist chunk. Rename SCSI_MAX_SG_CHAIN_SEGMENTS to SG_MAX_SEGMENTS. Will move these 2 generic definitions to scatterlist.h later. Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Bart Van Assche <bart.vanassche@sandisk.com> (for ib_srp changes) Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-03-23mpt3sas: Don't overreach ioc->reply_post[] during initializationCalvin Owens
In _base_make_ioc_operational(), we walk ioc->reply_queue_list and pull a pointer out of successive elements of ioc->reply_post[] for each entry in that list if RDPQ is enabled. Since the code pulls the pointer for the next iteration at the bottom of the loop, it triggers the a KASAN dump on the final iteration: BUG: KASAN: slab-out-of-bounds in _base_make_ioc_operational+0x47b7/0x47e0 [mpt3sas] at addr ffff880754816ab0 Read of size 8 by task modprobe/305 <snip> Call Trace: [<ffffffff81dfc591>] dump_stack+0x4d/0x6c [<ffffffff814c9689>] print_trailer+0xf9/0x150 [<ffffffff814ceda4>] object_err+0x34/0x40 [<ffffffff814d1231>] kasan_report_error+0x221/0x530 [<ffffffff814d1673>] __asan_report_load8_noabort+0x43/0x50 [<ffffffffa0043637>] _base_make_ioc_operational+0x47b7/0x47e0 [mpt3sas] [<ffffffffa0049a51>] mpt3sas_base_attach+0x1991/0x2120 [mpt3sas] [<ffffffffa0053c93>] _scsih_probe+0xeb3/0x16b0 [mpt3sas] [<ffffffff81ebd047>] local_pci_probe+0xc7/0x170 [<ffffffff81ebf2cf>] pci_device_probe+0x20f/0x290 [<ffffffff820d50cd>] really_probe+0x17d/0x600 [<ffffffff820d56a3>] __driver_attach+0x153/0x190 [<ffffffff820cffac>] bus_for_each_dev+0x11c/0x1a0 [<ffffffff820d421d>] driver_attach+0x3d/0x50 [<ffffffff820d378a>] bus_add_driver+0x44a/0x5f0 [<ffffffff820d666c>] driver_register+0x18c/0x3b0 [<ffffffff81ebcb76>] __pci_register_driver+0x156/0x200 [<ffffffffa00c8135>] _mpt3sas_init+0x135/0x1000 [mpt3sas] [<ffffffff81000423>] do_one_initcall+0x113/0x2b0 [<ffffffff813caa5a>] do_init_module+0x1d0/0x4d8 [<ffffffff81273909>] load_module+0x6729/0x8dc0 [<ffffffff81276123>] SYSC_init_module+0x183/0x1a0 [<ffffffff8127625e>] SyS_init_module+0xe/0x10 [<ffffffff828fe7d7>] entry_SYSCALL_64_fastpath+0x12/0x6a Fix this by pulling the value at the beginning of the loop. Signed-off-by: Calvin Owens <calvinowens@fb.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Jens Axboe <axboe@fb.com> Acked-by: Chaitra Basappa <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-03-09mpt3sas: Remove unnecessary synchronize_irq() before free_irq()Lars-Peter Clausen
Calling synchronize_irq() right before free_irq() is quite useless. On one hand the IRQ can easily fire again before free_irq() is entered, on the other hand free_irq() itself calls synchronize_irq() internally (in a race condition free way), before any state associated with the IRQ is freed. Patch was generated using the following semantic patch: // <smpl> @@ expression irq; @@ -synchronize_irq(irq); free_irq(irq, ...); // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Free memory pools before retrying to allocate with different value.Suganath prabu Subramani
Deallocate resources before reallocating of the same in retry_allocation path of _base_allocate_memory_pools() Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Remove cpumask_clear for zalloc_cpumask_var and don't free ↵Suganath prabu Subramani
free_cpu_mask_var before reply_q Removed cpumask_clear as it is not required for zalloc_cpumask_var and free free_cpumask_var before freeing reply_q. Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@broadcom.com> Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Updating mpt3sas driver version to 12.100.00.00Suganath prabu Subramani
Bump mpt3sas driver version from 09.102.00.00 to 12.100.00.00 Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Fix for Asynchronous completion of timedout IO and task abort of ↵Suganath prabu Subramani
timedout IO. Track msix of each IO and use the same msix for issuing abort to timed out IO. With this driver will process IO's reply first followed by TM. Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Updated MPI Header to 2.00.42Suganath prabu Subramani
Updated MPI version and MPI header files. Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Add support for configurable Chain Frame SizeSuganath prabu Subramani
Added support for configurable Chain Frame Size. Calculate the Chain Message Frame size from the IOCMaxChainSegementSize (iocfacts). Applicable only for mpt3sas/SAS3.0 HBA's. Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Added smp_affinity_enable module parameter.Suganath Prabu Subramani
Module parameter to enable/disable configuring affinity hint for msix vector. SMP affinity feature can be enabled/disabled by setting module parameter "smp_affinity_enable" to 1/0. By default this feature is enabled. (smp_affinity_enable = 1 enabled). Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Make use of additional HighPriority credit message frames for ↵Suganath prabu Subramani
sending SCSI IO's Driver assumes HighPriority credit as part of Global credit. But, Firmware treats HighPriority credit value and global cedits as two different values. Changed host queue algorithm to treat global credits and highPriority credits as two different values. Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Never block the Enclosure deviceSuganath prabu Subramani
Never block the SEP device (i.e. Never invoke the scsi_internal_device_block() API for SEP device) even for the delay not responding events. Blocking the SEP device will create a deadlock while adding any device to the OS. Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Fix static analyzer(coverity) tool identified defectsSuganath prabu Subramani
1.Wrong size of argument is being passed The size of struct being passed as an argument to memset func and area of memory being pointed by an instance of struct in memset func should be of same structure type. 2.Dereference null return value 3.Array compared against '0' Check whether value pointed by particular index of an array is null or not in "if" statement. Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Used IEEE SGL instead of MPI SGL while framing a SMP Passthrough ↵Suganath prabu Subramani
request message. As driver was using MPI SGL while framing the SMP Passthrough request message due to which firmware unable to post the Reply Data in the host memory and timeout is observed for this SMP Passthrough request message and so unable to perform phy disable operation. Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Added support for high port count HBA variants.Suganath prabu Subramani
Updated hardware description headers with MPI v2.6 and mpt3sas_pci_table[] with vendor_ids, device_ids of Cutlass and Intruder HBA which have support for 4 ports. Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-01-07Merge branch 'jejb-scsi' into miscJames Bottomley
2016-01-06mpt3sas: A correction in unmap_resourcesTomas Henzl
It might happen that we try to free an already freed pointer. Reported-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Chaitra P B <chaitra.basappa@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-03Merge branch 'mkp-fixes' into fixesJames Bottomley
2015-12-03mpt3sas: fix Kconfig dependency problem for mpt2sas back compatibilityJames Bottomley
The non-PCI builds of the O day test project are failing: On Thu, 2015-12-03 at 05:02 +0800, kbuild test robot wrote: > warning: (SCSI_MPT2SAS) selects SCSI_MPT3SAS which has unmet direct > dependencies (SCSI_LOWLEVEL && PCI && SCSI) The problem is that select and depend don't interact because Kconfig doesn't have a SAT solver, so depend picks up dependencies and select does onward selects, but select doesn't pick up dependencies. To fix this, we need to add the correct dependencies to the MPT2SAS option like this. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: b840c3627b6f4f856b333a14a72f8ed86da2f86c Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2015-11-30mpt3sas: Add dummy Kconfig option for backwards compatibilityMartin K. Petersen
The mpt2sas driver was recently folded into mpt3sas to reduce code duplication. To avoid problems for people that only have CONFIG_SCSI_MPT2SAS in their .config we introduce a dummy option that will select MPT3SAS if MPT2SAS was previously enabled. This is a temporary measure and we will deprecate this config option in 4.6. Reported-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: James Bottomley <James.Bottomley@hansenpartnership.com> CC: Ingo Molnar <mingo@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-13mpt3sas: Fix use sas_is_tlr_enabled API before enabling ↵Sreekanth Reddy
MPI2_SCSIIO_CONTROL_TLR_ON flag Before enabling MPI2_SCSIIO_CONTROL_TLR_ON flag in MPI SCSI IO request message, check whether TLR is enabled on the drive using 'sas_is_tlr_enabled' API. Actually in the driver code, driver is using below API's 1. sas_enable_tlr() - to enable the TLR 2. sas_disable_tlr() - to disable the TLR 3. sas_is_tlr_enabled() - to check whether TLR is enabled or not. but in scsih_qcmd() we have missed to use sas_is_tlr_enabled() API, instead we checking for TLR bit from flag field of driver's 'struct MPT3SAS_DEVIC' structure. which is corrected with this patch. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-12mpt3sas: fix inline markers on non inline function declarationsStephen Rothwell
After merging the scsi tree, today's linux-next build (powerpc allyesconfig) failed like this: In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:59:0: drivers/scsi/mpt3sas/mpt3sas_scsih.c: In function '_scsih_io_done': drivers/scsi/mpt3sas/mpt3sas_base.h:1414:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_get': function body not available mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid); ^ drivers/scsi/mpt3sas/mpt3sas_scsih.c:4448:6: error: called from here if (mpt3sas_scsi_direct_io_get(ioc, smid) && ^ In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:59:0: drivers/scsi/mpt3sas/mpt3sas_base.h:1416:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_set': function body not available mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io); ^ drivers/scsi/mpt3sas/mpt3sas_scsih.c:4454:3: error: called from here mpt3sas_scsi_direct_io_set(ioc, smid, 0); ^ In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:5 9:0: drivers/scsi/mpt3sas/mpt3sas_base.h:1416:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_set': function body not available mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io); ^ drivers/scsi/mpt3sas/mpt3sas_scsih.c:4454:3: error: called from here mpt3sas_scsi_direct_io_set(ioc, smid, 0); ^ Presumably caused by commit c84b06a48c4d ("mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-11mpt3sas: Bump mpt3sas driver version to 09.102.00.00Sreekanth Reddy
Bump mpt3sas driver version to 09.102.00.00 Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAsSreekanth Reddy
Modified the mpt3sas driver to have a single driver module which supports both SAS 2.0 & SAS 3.0 HBA devices. * Added SAS 2.0 HBA device IDs to the mpt3sas_pci_table pci table. * Created two separate SCSI host templates for SAS2 and SAS3 HBAs so that, during the driver load time driver can use corresponding host template(based the pci device ID) while registering a scsi host adapter instance for that pci device. * Registered two IOCTL devices, mpt2ctl is for SAS2 HBAs & mpt3ctl for SAS3 HBAs. Also updated the code to make sure that mpt2ctl device processes only those ioctl cmds issued for the SAS2 HBAs and mpt3ctl device processes only those ioctl cmds issued for the SAS3 HBAs. * Added separate indexing for SAS2 and SAS3 HBAs. * Replaced compile time check 'MPT2SAS_SCSI' to run time check 'hba_mpi_version_belonged' whereever needed. * Aliased this merged driver to mpt2sas using MODULE_ALIAS. * Moved global varaible 'driver_name' to per adapter instance variable. * Created two raid function template and used corresponding raid function templates based on the run time check 'hba_mpi_version_belonged'. * Moved mpt2sas_warpdrive.c file from mpt2sas to mpt3sas folder and renamed it as mpt3sas_warpdrive.c. * Also renamed the functions in mpt3sas_warpdrive.c file to follow current driver function name convention. * Updated the Makefile to build mpt3sas_warpdrive.o file for these WarpDrive-specific functions. * Also in function mpt3sas_setup_direct_io(), used sector_div() API instead of division operator (which gives compilation errors on 32 bit machines). * Removed mpt2sas files, mpt2sas directory & mpt3sas_module.c file. * Added module parameter 'hbas_to_enumerate' which permits using this merged driver as a legacy mpt2sas driver or as a legacy mpt3sas driver. Here are the available options for this module parameter: 0 - Merged driver which enumerates both SAS 2.0 & SAS 3.0 HBAs 1 - Acts as legacy mpt2sas driver, which enumerates only SAS 2.0 HBAs 2 - Acts as legacy mpt3sas driver, which enumerates only SAS 3.0 HBAs * Removed mpt2sas entries from SCSI's Kconfig and Makefile files. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt2sas, mpt3sas: Update the driver versionsSreekanth Reddy
Bump the mpt2sas driver version to 20.102.00.00 and Bump the mpt3sas driver version to 9.101.00.00. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: setpci reset kernel oops fixSreekanth Reddy
setpci reset on nytro warpdrive card along with sysfs access and cli ioctl access resulted in kernel oops 1. pci_access_mutex lock added to provide synchronization between IOCTL, sysfs, PCI resource handling path 2. gioc_lock spinlock to protect list operations over multiple controllers This patch is ported from commit 6229b414b3ad ("mpt2sas: setpci reset kernel oops fix"). Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Added OEM Gen2 PnP ID branding namesSreekanth Reddy
Added OEM Gen2 PnP ID branding names from mpt2sas driver. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Refcount fw_events and fix unsafe list usageSreekanth Reddy
The fw_event_work struct is concurrently referenced at shutdown. Add a refcount to protect it and refactor the code to use it. Additionally, refactor _scsih_fw_event_cleanup_queue() such that it no longer iterates over the list without holding the lock since _firmware_event_work() concurrently deletes items from the list. This patch is ported from commit 008549f6e8a1 ("mpt2sas: Refcount fw_events and fix unsafe list usage"). These changes are also required for mpt3sas. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Refcount sas_device objects and fix unsafe list usageSreekanth Reddy
sas_device objects can be referenced concurrently throughout the driver. We need a way to make sure threads can't delete them out from under each other. This patch adds the refcount and refactors the code to use it. Additionally, we cannot iterate over the sas_device_list without holding the lock or we risk corrupting random memory if items are added or deleted as we iterate. This patch refactors _scsih_probe_sas() to use the sas_device_list in a safe way. This patch is ported from the following mpt2sas driver commit d224fe0d6097 ("mpt2sas: Refcount sas_device objects and fix unsafe list usage"). Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: sysfs attribute to report Backup Rail Monitor StatusSreekanth Reddy
A new sysfs shost attribute called "BMR_status" is implemented to report Backup Rail Monitor status. This attribute is located in: /sys/class/scsi_host/host#/BMR_status When reading this adapter attribute, the driver will output the state of GPIO[24]. It returns "0" if BMR is healthy and "1" for failure. If it returns an empty string then it means that there was an error while obtaining the BMR status. Check dmesg for what error has occurred. This sysfs shost attribute is mainly for WarpDrive controllers. This commit is a port of 6c265660c262 ("mpt2sas: Provide sysfs attribute to report Backup Rail Monitor Status"). Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Ported WarpDrive product SSS6200 supportSreekanth Reddy
Ported the following list of WarpDrive-specific patches: 1. commit 0bdccdb0a090ad8dc5f851cad5e843244c410ee8 ("mpt2sas: WarpDrive New product SSS6200 support added") 2. commit 82a452581230b3ffc9d6475dffdb2568497b5fec ("mpt2sas: WarpDrive Infinite command retries due to wrong scsi command entry in MPI message") 3. commit ba96bd0b1d4a4e11f23671e1f375a5c8f46b0fe7 ("mpt2sas: Support for greater than 2TB capacity WarpDrive") 4. commit 4da7af9494b2f98a1503a2634059300c3e4615e6 ("mpt2sas: Do not retry a timed out direct IO for Warpdrive") 5. commit daeaa9df92bd742f4e6d4d6039d689277a8e31bd ("mpt2sas: Avoid type casting for direct I/O commands"). Also set the mpt2_ioctl_iocinfo adapter_type to: 1. MPT3_IOCTL_INTERFACE_SAS3 for Gen3 HBAs 2. MPT2_IOCTL_INTERFACE_SAS2_SSS6200 for Warp Drive 3. MPT2_IOCTL_INTERFACE_SAS2 for other Gen2 HBAs Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: fix for driver fails EEH, recovery from injected pci bus errorSreekanth Reddy
This patch stops the driver to invoke kthread (which remove the dead ioc) for some time while EEH recovery has started. This patch is a port of commit b4730fb6e54a ("mpt2sas: fix for driver fails EEH, recovery from injected pci bus error")'. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Manage MSI-X vectors according to HBA device typeSreekanth Reddy
1. Do not enable MSI-X vectors for SAS2008 B0 controllers 2. Enable a single MSI-X vector for the following controller: a. SAS2004 b. SAS2008 c. SAS2008_1 d. SAS2008_2 e. SAS2008_3 f. SAS2116_1 g. SAS2116_2 3. Enable Combined Reply Post Queue Support (i.e. 96 MSI-X vectors) for Gen3 Invader/Fury C0 and above revision HBAs 4. Enable Combined Reply Post Queue Support (i.e. 96 MSI-X vectors) for all Intruder and Cutlass HBAs Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Don't send PHYDISK_HIDDEN RAID action request on SAS2 HBAsSreekanth Reddy
Avoid sending PHYDISK_HIDDEN RAID action requests to SAS2 controllers since they don't support it. Also enable fast_path only for SAS3 HBAs. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Build MPI SGL LIST on GEN2 HBAs and IEEE SGL LIST on GEN3 HBAsSreekanth Reddy
Gen2 HBAs use MPI scatter-gather lists whereas Gen3 HBAs use IEEE scatter-gather lists. Modify the common code part in such a way that it will build IEEE SGL tables for Gen3 HBAs and MPI SGL tables for Gen2 HBAs. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt2sas, mpt3sas: Remove SCSI_MPTXSAS_LOGGING entry from KconfigSreekanth Reddy
Currently there is a logging level option provided for each of our drivers in the kernel configuration utility. Users can enable this option to get more verbose information. By default it is enabled. Only when this option is enabled will the functions which display the required information get compiled in. As we are merging the both drivers we can no longer provide this configuration option. Remove the SCSI_MPTXSAS_LOGGING entry from Kconfig and unconditionally enable logging (by removing the #ifdef CONFIG_SCSI_MPT3SAS_LOGGING preprocessor check conditions) so that all functions which are defined to display more verbose information get compiled in. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Define 'hba_mpi_version_belonged' IOC variableSreekanth Reddy
1. Use 'hba_mpi_version_belonged' IOC varable to uniquely identify each individual generation driver functionality at runtime. 2. Declare global variable 'driver_name' and use this variable while reserving PCI regions and while allocating the IRQs. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-11 20:04:19 +0000