summaryrefslogtreecommitdiffstats
path: root/include/asm-sparc
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-sparc')
-rw-r--r--include/asm-sparc/a.out.h98
-rw-r--r--include/asm-sparc/apc.h64
-rw-r--r--include/asm-sparc/asi.h112
-rw-r--r--include/asm-sparc/asmmacro.h46
-rw-r--r--include/asm-sparc/atomic.h158
-rw-r--r--include/asm-sparc/audioio.h234
-rw-r--r--include/asm-sparc/auxio.h89
-rw-r--r--include/asm-sparc/bitext.h27
-rw-r--r--include/asm-sparc/bitops.h537
-rw-r--r--include/asm-sparc/bpp.h73
-rw-r--r--include/asm-sparc/bsderrno.h94
-rw-r--r--include/asm-sparc/btfixup.h208
-rw-r--r--include/asm-sparc/bug.h31
-rw-r--r--include/asm-sparc/bugs.h17
-rw-r--r--include/asm-sparc/byteorder.h14
-rw-r--r--include/asm-sparc/cache.h130
-rw-r--r--include/asm-sparc/cacheflush.h85
-rw-r--r--include/asm-sparc/checksum.h253
-rw-r--r--include/asm-sparc/clock.h11
-rw-r--r--include/asm-sparc/contregs.h54
-rw-r--r--include/asm-sparc/cpudata.h26
-rw-r--r--include/asm-sparc/cputime.h6
-rw-r--r--include/asm-sparc/current.h31
-rw-r--r--include/asm-sparc/cypress.h79
-rw-r--r--include/asm-sparc/delay.h35
-rw-r--r--include/asm-sparc/div64.h1
-rw-r--r--include/asm-sparc/dma-mapping.h25
-rw-r--r--include/asm-sparc/dma.h290
-rw-r--r--include/asm-sparc/ebus.h98
-rw-r--r--include/asm-sparc/ecc.h122
-rw-r--r--include/asm-sparc/eeprom.h9
-rw-r--r--include/asm-sparc/elf.h173
-rw-r--r--include/asm-sparc/errno.h110
-rw-r--r--include/asm-sparc/fbio.h297
-rw-r--r--include/asm-sparc/fcntl.h89
-rw-r--r--include/asm-sparc/fixmap.h111
-rw-r--r--include/asm-sparc/floppy.h369
-rw-r--r--include/asm-sparc/hardirq.h24
-rw-r--r--include/asm-sparc/hdreg.h1
-rw-r--r--include/asm-sparc/head.h125
-rw-r--r--include/asm-sparc/highmem.h81
-rw-r--r--include/asm-sparc/hw_irq.h6
-rw-r--r--include/asm-sparc/ide.h100
-rw-r--r--include/asm-sparc/idprom.h33
-rw-r--r--include/asm-sparc/io-unit.h62
-rw-r--r--include/asm-sparc/io.h290
-rw-r--r--include/asm-sparc/ioctl.h68
-rw-r--r--include/asm-sparc/ioctls.h134
-rw-r--r--include/asm-sparc/iommu.h121
-rw-r--r--include/asm-sparc/ipc.h1
-rw-r--r--include/asm-sparc/ipcbuf.h31
-rw-r--r--include/asm-sparc/irq.h191
-rw-r--r--include/asm-sparc/jsflash.h39
-rw-r--r--include/asm-sparc/kbio.h56
-rw-r--r--include/asm-sparc/kdebug.h69
-rw-r--r--include/asm-sparc/kgdb.h94
-rw-r--r--include/asm-sparc/kmap_types.h21
-rw-r--r--include/asm-sparc/linkage.h6
-rw-r--r--include/asm-sparc/local.h6
-rw-r--r--include/asm-sparc/machines.h69
-rw-r--r--include/asm-sparc/mbus.h102
-rw-r--r--include/asm-sparc/mc146818rtc.h29
-rw-r--r--include/asm-sparc/memreg.h52
-rw-r--r--include/asm-sparc/mman.h62
-rw-r--r--include/asm-sparc/mmu.h7
-rw-r--r--include/asm-sparc/mmu_context.h40
-rw-r--r--include/asm-sparc/module.h7
-rw-r--r--include/asm-sparc/mostek.h174
-rw-r--r--include/asm-sparc/mpmbox.h67
-rw-r--r--include/asm-sparc/msgbuf.h31
-rw-r--r--include/asm-sparc/msi.h31
-rw-r--r--include/asm-sparc/mxcc.h137
-rw-r--r--include/asm-sparc/namei.h26
-rw-r--r--include/asm-sparc/obio.h249
-rw-r--r--include/asm-sparc/openprom.h258
-rw-r--r--include/asm-sparc/openpromio.h69
-rw-r--r--include/asm-sparc/oplib.h317
-rw-r--r--include/asm-sparc/page.h181
-rw-r--r--include/asm-sparc/param.h23
-rw-r--r--include/asm-sparc/pbm.h46
-rw-r--r--include/asm-sparc/pci.h163
-rw-r--r--include/asm-sparc/pcic.h123
-rw-r--r--include/asm-sparc/pconf.h25
-rw-r--r--include/asm-sparc/percpu.h6
-rw-r--r--include/asm-sparc/perfctr.h173
-rw-r--r--include/asm-sparc/pgalloc.h69
-rw-r--r--include/asm-sparc/pgtable.h465
-rw-r--r--include/asm-sparc/pgtsrmmu.h298
-rw-r--r--include/asm-sparc/pgtsun4.h171
-rw-r--r--include/asm-sparc/pgtsun4c.h172
-rw-r--r--include/asm-sparc/poll.h23
-rw-r--r--include/asm-sparc/posix_types.h122
-rw-r--r--include/asm-sparc/processor.h130
-rw-r--r--include/asm-sparc/psr.h92
-rw-r--r--include/asm-sparc/ptrace.h167
-rw-r--r--include/asm-sparc/reg.h79
-rw-r--r--include/asm-sparc/resource.h26
-rw-r--r--include/asm-sparc/ross.h191
-rw-r--r--include/asm-sparc/rtc.h27
-rw-r--r--include/asm-sparc/sbi.h115
-rw-r--r--include/asm-sparc/sbus.h142
-rw-r--r--include/asm-sparc/scatterlist.h22
-rw-r--r--include/asm-sparc/sections.h6
-rw-r--r--include/asm-sparc/segment.h6
-rw-r--r--include/asm-sparc/semaphore.h196
-rw-r--r--include/asm-sparc/sembuf.h25
-rw-r--r--include/asm-sparc/setup.h10
-rw-r--r--include/asm-sparc/sfp-machine.h207
-rw-r--r--include/asm-sparc/shmbuf.h42
-rw-r--r--include/asm-sparc/shmparam.h12
-rw-r--r--include/asm-sparc/sigcontext.h63
-rw-r--r--include/asm-sparc/siginfo.h21
-rw-r--r--include/asm-sparc/signal.h234
-rw-r--r--include/asm-sparc/smp.h176
-rw-r--r--include/asm-sparc/smpprim.h54
-rw-r--r--include/asm-sparc/socket.h55
-rw-r--r--include/asm-sparc/sockios.h13
-rw-r--r--include/asm-sparc/solerrno.h132
-rw-r--r--include/asm-sparc/spinlock.h238
-rw-r--r--include/asm-sparc/stat.h77
-rw-r--r--include/asm-sparc/statfs.h7
-rw-r--r--include/asm-sparc/string.h205
-rw-r--r--include/asm-sparc/sun4paddr.h56
-rw-r--r--include/asm-sparc/sun4prom.h83
-rw-r--r--include/asm-sparc/sunbpp.h80
-rw-r--r--include/asm-sparc/svr4.h119
-rw-r--r--include/asm-sparc/swift.h106
-rw-r--r--include/asm-sparc/sysen.h15
-rw-r--r--include/asm-sparc/system.h262
-rw-r--r--include/asm-sparc/termbits.h234
-rw-r--r--include/asm-sparc/termios.h174
-rw-r--r--include/asm-sparc/thread_info.h153
-rw-r--r--include/asm-sparc/timer.h110
-rw-r--r--include/asm-sparc/timex.h15
-rw-r--r--include/asm-sparc/tlb.h24
-rw-r--r--include/asm-sparc/tlbflush.h63
-rw-r--r--include/asm-sparc/topology.h6
-rw-r--r--include/asm-sparc/traps.h140
-rw-r--r--include/asm-sparc/tsunami.h64
-rw-r--r--include/asm-sparc/turbosparc.h125
-rw-r--r--include/asm-sparc/types.h63
-rw-r--r--include/asm-sparc/uaccess.h389
-rw-r--r--include/asm-sparc/unaligned.h6
-rw-r--r--include/asm-sparc/unistd.h518
-rw-r--r--include/asm-sparc/user.h60
-rw-r--r--include/asm-sparc/vac-ops.h136
-rw-r--r--include/asm-sparc/vaddrs.h70
-rw-r--r--include/asm-sparc/vfc_ioctls.h58
-rw-r--r--include/asm-sparc/viking.h253
-rw-r--r--include/asm-sparc/vuid_event.h41
-rw-r--r--include/asm-sparc/winmacro.h136
-rw-r--r--include/asm-sparc/xor.h269
152 files changed, 16150 insertions, 0 deletions
diff --git a/include/asm-sparc/a.out.h b/include/asm-sparc/a.out.h
new file mode 100644
index 000000000000..e4e83eb0161e
--- /dev/null
+++ b/include/asm-sparc/a.out.h
@@ -0,0 +1,98 @@
+/* $Id: a.out.h,v 1.13 2000/01/09 10:46:53 anton Exp $ */
+#ifndef __SPARC_A_OUT_H__
+#define __SPARC_A_OUT_H__
+
+#define SPARC_PGSIZE 0x2000 /* Thanks to the sun4 architecture... */
+#define SEGMENT_SIZE SPARC_PGSIZE /* whee... */
+
+struct exec {
+ unsigned char a_dynamic:1; /* A __DYNAMIC is in this image */
+ unsigned char a_toolversion:7;
+ unsigned char a_machtype;
+ unsigned short a_info;
+ unsigned long a_text; /* length of text, in bytes */
+ unsigned long a_data; /* length of data, in bytes */
+ unsigned long a_bss; /* length of bss, in bytes */
+ unsigned long a_syms; /* length of symbol table, in bytes */
+ unsigned long a_entry; /* where program begins */
+ unsigned long a_trsize;
+ unsigned long a_drsize;
+};
+
+/* Where in the file does the text information begin? */
+#define N_TXTOFF(x) (N_MAGIC(x) == ZMAGIC ? 0 : sizeof (struct exec))
+
+/* Where do the Symbols start? */
+#define N_SYMOFF(x) (N_TXTOFF(x) + (x).a_text + \
+ (x).a_data + (x).a_trsize + \
+ (x).a_drsize)
+
+/* Where does text segment go in memory after being loaded? */
+#define N_TXTADDR(x) (((N_MAGIC(x) == ZMAGIC) && \
+ ((x).a_entry < SPARC_PGSIZE)) ? \
+ 0 : SPARC_PGSIZE)
+
+/* And same for the data segment.. */
+#define N_DATADDR(x) (N_MAGIC(x)==OMAGIC ? \
+ (N_TXTADDR(x) + (x).a_text) \
+ : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
+
+#define N_TRSIZE(a) ((a).a_trsize)
+#define N_DRSIZE(a) ((a).a_drsize)
+#define N_SYMSIZE(a) ((a).a_syms)
+
+/*
+ * Sparc relocation types
+ */
+enum reloc_type
+{
+ RELOC_8,
+ RELOC_16,
+ RELOC_32, /* simplest relocs */
+ RELOC_DISP8,
+ RELOC_DISP16,
+ RELOC_DISP32, /* Disp's (pc-rel) */
+ RELOC_WDISP30,
+ RELOC_WDISP22, /* SR word disp's */
+ RELOC_HI22,
+ RELOC_22, /* SR 22-bit relocs */
+ RELOC_13,
+ RELOC_LO10, /* SR 13&10-bit relocs */
+ RELOC_SFA_BASE,
+ RELOC_SFA_OFF13, /* SR S.F.A. relocs */
+ RELOC_BASE10,
+ RELOC_BASE13,
+ RELOC_BASE22, /* base_relative pic */
+ RELOC_PC10,
+ RELOC_PC22, /* special pc-rel pic */
+ RELOC_JMP_TBL, /* jmp_tbl_rel in pic */
+ RELOC_SEGOFF16, /* ShLib offset-in-seg */
+ RELOC_GLOB_DAT,
+ RELOC_JMP_SLOT,
+ RELOC_RELATIVE /* rtld relocs */
+};
+
+/*
+ * Format of a relocation datum.
+ */
+struct relocation_info /* used when header.a_machtype == M_SPARC */
+{
+ unsigned long r_address; /* relocation addr */
+ unsigned int r_index:24; /* segment index or symbol index */
+ unsigned int r_extern:1; /* if F, r_index==SEG#; if T, SYM idx */
+ int r_pad:2; /* <unused> */
+ enum reloc_type r_type:5; /* type of relocation to perform */
+ long r_addend; /* addend for relocation value */
+};
+
+#define N_RELOCATION_INFO_DECLARED 1
+
+#ifdef __KERNEL__
+
+#include <asm/page.h>
+
+#define STACK_TOP (PAGE_OFFSET - PAGE_SIZE)
+
+#endif /* __KERNEL__ */
+
+#endif /* __SPARC_A_OUT_H__ */
diff --git a/include/asm-sparc/apc.h b/include/asm-sparc/apc.h
new file mode 100644
index 000000000000..24e9a7d4d97e
--- /dev/null
+++ b/include/asm-sparc/apc.h
@@ -0,0 +1,64 @@
+/* apc - Driver definitions for power management functions
+ * of Aurora Personality Chip (APC) on SPARCstation-4/5 and
+ * derivatives
+ *
+ * Copyright (c) 2001 Eric Brower (ebrower@usa.net)
+ *
+ */
+
+#ifndef _SPARC_APC_H
+#define _SPARC_APC_H
+
+#include <linux/ioctl.h>
+
+#define APC_IOC 'A'
+
+#define APCIOCGFANCTL _IOR(APC_IOC, 0x00, int) /* Get fan speed */
+#define APCIOCSFANCTL _IOW(APC_IOC, 0x01, int) /* Set fan speed */
+
+#define APCIOCGCPWR _IOR(APC_IOC, 0x02, int) /* Get CPOWER state */
+#define APCIOCSCPWR _IOW(APC_IOC, 0x03, int) /* Set CPOWER state */
+
+#define APCIOCGBPORT _IOR(APC_IOC, 0x04, int) /* Get BPORT state */
+#define APCIOCSBPORT _IOW(APC_IOC, 0x05, int) /* Set BPORT state */
+
+/*
+ * Register offsets
+ */
+#define APC_IDLE_REG 0x00
+#define APC_FANCTL_REG 0x20
+#define APC_CPOWER_REG 0x24
+#define APC_BPORT_REG 0x30
+
+#define APC_REGMASK 0x01
+#define APC_BPMASK 0x03
+
+/*
+ * IDLE - CPU standby values (set to initiate standby)
+ */
+#define APC_IDLE_ON 0x01
+
+/*
+ * FANCTL - Fan speed control state values
+ */
+#define APC_FANCTL_HI 0x00 /* Fan speed high */
+#define APC_FANCTL_LO 0x01 /* Fan speed low */
+
+/*
+ * CPWR - Convenience power outlet state values
+ */
+#define APC_CPOWER_ON 0x00 /* Conv power on */
+#define APC_CPOWER_OFF 0x01 /* Conv power off */
+
+/*
+ * BPA/BPB - Read-Write "Bit Ports" state values (reset to 0 at power-on)
+ *
+ * WARNING: Internal usage of bit ports is platform dependent--
+ * don't modify BPORT settings unless you know what you are doing.
+ *
+ * On SS5 BPA seems to toggle onboard ethernet loopback... -E
+ */
+#define APC_BPORT_A 0x01 /* Bit Port A */
+#define APC_BPORT_B 0x02 /* Bit Port B */
+
+#endif /* !(_SPARC_APC_H) */
diff --git a/include/asm-sparc/asi.h b/include/asm-sparc/asi.h
new file mode 100644
index 000000000000..58c3754da926
--- /dev/null
+++ b/include/asm-sparc/asi.h
@@ -0,0 +1,112 @@
+/* $Id: asi.h,v 1.18 1998/03/09 14:04:46 jj Exp $ */
+#ifndef _SPARC_ASI_H
+#define _SPARC_ASI_H
+
+/* asi.h: Address Space Identifier values for the sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Pioneer work for sun4m: Paul Hatchman (paul@sfe.com.au)
+ * Joint edition for sun4c+sun4m: Pete A. Zaitcev <zaitcev@ipmce.su>
+ */
+
+/* The first batch are for the sun4c. */
+
+#define ASI_NULL1 0x00
+#define ASI_NULL2 0x01
+
+/* sun4c and sun4 control registers and mmu/vac ops */
+#define ASI_CONTROL 0x02
+#define ASI_SEGMAP 0x03
+#define ASI_PTE 0x04
+#define ASI_HWFLUSHSEG 0x05
+#define ASI_HWFLUSHPAGE 0x06
+#define ASI_REGMAP 0x06
+#define ASI_HWFLUSHCONTEXT 0x07
+
+#define ASI_USERTXT 0x08
+#define ASI_KERNELTXT 0x09
+#define ASI_USERDATA 0x0a
+#define ASI_KERNELDATA 0x0b
+
+/* VAC Cache flushing on sun4c and sun4 */
+#define ASI_FLUSHSEG 0x0c
+#define ASI_FLUSHPG 0x0d
+#define ASI_FLUSHCTX 0x0e
+
+/* SPARCstation-5: only 6 bits are decoded. */
+/* wo = Write Only, rw = Read Write; */
+/* ss = Single Size, as = All Sizes; */
+#define ASI_M_RES00 0x00 /* Don't touch... */
+#define ASI_M_UNA01 0x01 /* Same here... */
+#define ASI_M_MXCC 0x02 /* Access to TI VIKING MXCC registers */
+#define ASI_M_FLUSH_PROBE 0x03 /* Reference MMU Flush/Probe; rw, ss */
+#define ASI_M_MMUREGS 0x04 /* MMU Registers; rw, ss */
+#define ASI_M_TLBDIAG 0x05 /* MMU TLB only Diagnostics */
+#define ASI_M_DIAGS 0x06 /* Reference MMU Diagnostics */
+#define ASI_M_IODIAG 0x07 /* MMU I/O TLB only Diagnostics */
+#define ASI_M_USERTXT 0x08 /* Same as ASI_USERTXT; rw, as */
+#define ASI_M_KERNELTXT 0x09 /* Same as ASI_KERNELTXT; rw, as */
+#define ASI_M_USERDATA 0x0A /* Same as ASI_USERDATA; rw, as */
+#define ASI_M_KERNELDATA 0x0B /* Same as ASI_KERNELDATA; rw, as */
+#define ASI_M_TXTC_TAG 0x0C /* Instruction Cache Tag; rw, ss */
+#define ASI_M_TXTC_DATA 0x0D /* Instruction Cache Data; rw, ss */
+#define ASI_M_DATAC_TAG 0x0E /* Data Cache Tag; rw, ss */
+#define ASI_M_DATAC_DATA 0x0F /* Data Cache Data; rw, ss */
+
+/* The following cache flushing ASIs work only with the 'sta'
+ * instruction. Results are unpredictable for 'swap' and 'ldstuba',
+ * so don't do it.
+ */
+
+/* These ASI flushes affect external caches too. */
+#define ASI_M_FLUSH_PAGE 0x10 /* Flush I&D Cache Line (page); wo, ss */
+#define ASI_M_FLUSH_SEG 0x11 /* Flush I&D Cache Line (seg); wo, ss */
+#define ASI_M_FLUSH_REGION 0x12 /* Flush I&D Cache Line (region); wo, ss */
+#define ASI_M_FLUSH_CTX 0x13 /* Flush I&D Cache Line (context); wo, ss */
+#define ASI_M_FLUSH_USER 0x14 /* Flush I&D Cache Line (user); wo, ss */
+
+/* Block-copy operations are available only on certain V8 cpus. */
+#define ASI_M_BCOPY 0x17 /* Block copy */
+
+/* These affect only the ICACHE and are Ross HyperSparc and TurboSparc specific. */
+#define ASI_M_IFLUSH_PAGE 0x18 /* Flush I Cache Line (page); wo, ss */
+#define ASI_M_IFLUSH_SEG 0x19 /* Flush I Cache Line (seg); wo, ss */
+#define ASI_M_IFLUSH_REGION 0x1A /* Flush I Cache Line (region); wo, ss */
+#define ASI_M_IFLUSH_CTX 0x1B /* Flush I Cache Line (context); wo, ss */
+#define ASI_M_IFLUSH_USER 0x1C /* Flush I Cache Line (user); wo, ss */
+
+/* Block-fill operations are available on certain V8 cpus */
+#define ASI_M_BFILL 0x1F
+
+/* This allows direct access to main memory, actually 0x20 to 0x2f are
+ * the available ASI's for physical ram pass-through, but I don't have
+ * any idea what the other ones do....
+ */
+
+#define ASI_M_BYPASS 0x20 /* Reference MMU bypass; rw, as */
+#define ASI_M_FBMEM 0x29 /* Graphics card frame buffer access */
+#define ASI_M_VMEUS 0x2A /* VME user 16-bit access */
+#define ASI_M_VMEPS 0x2B /* VME priv 16-bit access */
+#define ASI_M_VMEUT 0x2C /* VME user 32-bit access */
+#define ASI_M_VMEPT 0x2D /* VME priv 32-bit access */
+#define ASI_M_SBUS 0x2E /* Direct SBus access */
+#define ASI_M_CTL 0x2F /* Control Space (ECC and MXCC are here) */
+
+
+/* This is ROSS HyperSparc only. */
+#define ASI_M_FLUSH_IWHOLE 0x31 /* Flush entire ICACHE; wo, ss */
+
+/* Tsunami/Viking/TurboSparc i/d cache flash clear. */
+#define ASI_M_IC_FLCLEAR 0x36
+#define ASI_M_DC_FLCLEAR 0x37
+
+#define ASI_M_DCDR 0x39 /* Data Cache Diagnostics Register rw, ss */
+
+#define ASI_M_VIKING_TMP1 0x40 /* Emulation temporary 1 on Viking */
+/* only available on SuperSparc I */
+/* #define ASI_M_VIKING_TMP2 0x41 */ /* Emulation temporary 2 on Viking */
+
+#define ASI_M_ACTION 0x4c /* Breakpoint Action Register (GNU/Viking) */
+
+#endif /* _SPARC_ASI_H */
diff --git a/include/asm-sparc/asmmacro.h b/include/asm-sparc/asmmacro.h
new file mode 100644
index 000000000000..0d4b65bd252b
--- /dev/null
+++ b/include/asm-sparc/asmmacro.h
@@ -0,0 +1,46 @@
+/* asmmacro.h: Assembler macros.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu)
+ */
+
+#ifndef _SPARC_ASMMACRO_H
+#define _SPARC_ASMMACRO_H
+
+#include <linux/config.h>
+#include <asm/btfixup.h>
+#include <asm/asi.h>
+
+#define GET_PROCESSOR4M_ID(reg) \
+ rd %tbr, %reg; \
+ srl %reg, 12, %reg; \
+ and %reg, 3, %reg;
+
+#define GET_PROCESSOR4D_ID(reg) \
+ lda [%g0] ASI_M_VIKING_TMP1, %reg;
+
+/* All trap entry points _must_ begin with this macro or else you
+ * lose. It makes sure the kernel has a proper window so that
+ * c-code can be called.
+ */
+#define SAVE_ALL_HEAD \
+ sethi %hi(trap_setup), %l4; \
+ jmpl %l4 + %lo(trap_setup), %l6;
+#define SAVE_ALL \
+ SAVE_ALL_HEAD \
+ nop;
+
+/* All traps low-level code here must end with this macro. */
+#define RESTORE_ALL b ret_trap_entry; clr %l6;
+
+/* sun4 probably wants half word accesses to ASI_SEGMAP, while sun4c+
+ likes byte accesses. These are to avoid ifdef mania. */
+
+#ifdef CONFIG_SUN4
+#define lduXa lduha
+#define stXa stha
+#else
+#define lduXa lduba
+#define stXa stba
+#endif
+
+#endif /* !(_SPARC_ASMMACRO_H) */
diff --git a/include/asm-sparc/atomic.h b/include/asm-sparc/atomic.h
new file mode 100644
index 000000000000..37f6ab601c3d
--- /dev/null
+++ b/include/asm-sparc/atomic.h
@@ -0,0 +1,158 @@
+/* atomic.h: These still suck, but the I-cache hit rate is higher.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2000 Anton Blanchard (anton@linuxcare.com.au)
+ *
+ * Additions by Keith M Wesolowski (wesolows@foobazco.org) based
+ * on asm-parisc/atomic.h Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>.
+ */
+
+#ifndef __ARCH_SPARC_ATOMIC__
+#define __ARCH_SPARC_ATOMIC__
+
+#include <linux/config.h>
+
+typedef struct { volatile int counter; } atomic_t;
+
+#ifdef __KERNEL__
+
+#define ATOMIC_INIT(i) { (i) }
+
+extern int __atomic_add_return(int, atomic_t *);
+extern void atomic_set(atomic_t *, int);
+
+#define atomic_read(v) ((v)->counter)
+
+#define atomic_add(i, v) ((void)__atomic_add_return( (int)(i), (v)))
+#define atomic_sub(i, v) ((void)__atomic_add_return(-(int)(i), (v)))
+#define atomic_inc(v) ((void)__atomic_add_return( 1, (v)))
+#define atomic_dec(v) ((void)__atomic_add_return( -1, (v)))
+
+#define atomic_add_return(i, v) (__atomic_add_return( (int)(i), (v)))
+#define atomic_sub_return(i, v) (__atomic_add_return(-(int)(i), (v)))
+#define atomic_inc_return(v) (__atomic_add_return( 1, (v)))
+#define atomic_dec_return(v) (__atomic_add_return( -1, (v)))
+
+#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+
+/* This is the old 24-bit implementation. It's still used internally
+ * by some sparc-specific code, notably the semaphore implementation.
+ */
+typedef struct { volatile int counter; } atomic24_t;
+
+#ifndef CONFIG_SMP
+
+#define ATOMIC24_INIT(i) { (i) }
+#define atomic24_read(v) ((v)->counter)
+#define atomic24_set(v, i) (((v)->counter) = i)
+
+#else
+/* We do the bulk of the actual work out of line in two common
+ * routines in assembler, see arch/sparc/lib/atomic.S for the
+ * "fun" details.
+ *
+ * For SMP the trick is you embed the spin lock byte within
+ * the word, use the low byte so signedness is easily retained
+ * via a quick arithmetic shift. It looks like this:
+ *
+ * ----------------------------------------
+ * | signed 24-bit counter value | lock | atomic_t
+ * ----------------------------------------
+ * 31 8 7 0
+ */
+
+#define ATOMIC24_INIT(i) { ((i) << 8) }
+
+static inline int atomic24_read(const atomic24_t *v)
+{
+ int ret = v->counter;
+
+ while(ret & 0xff)
+ ret = v->counter;
+
+ return ret >> 8;
+}
+
+#define atomic24_set(v, i) (((v)->counter) = ((i) << 8))
+#endif
+
+static inline int __atomic24_add(int i, atomic24_t *v)
+{
+ register volatile int *ptr asm("g1");
+ register int increment asm("g2");
+ register int tmp1 asm("g3");
+ register int tmp2 asm("g4");
+ register int tmp3 asm("g7");
+
+ ptr = &v->counter;
+ increment = i;
+
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___atomic24_add\n\t"
+ " add %%o7, 8, %%o7\n"
+ : "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)
+ : "0" (increment), "r" (ptr)
+ : "memory", "cc");
+
+ return increment;
+}
+
+static inline int __atomic24_sub(int i, atomic24_t *v)
+{
+ register volatile int *ptr asm("g1");
+ register int increment asm("g2");
+ register int tmp1 asm("g3");
+ register int tmp2 asm("g4");
+ register int tmp3 asm("g7");
+
+ ptr = &v->counter;
+ increment = i;
+
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___atomic24_sub\n\t"
+ " add %%o7, 8, %%o7\n"
+ : "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)
+ : "0" (increment), "r" (ptr)
+ : "memory", "cc");
+
+ return increment;
+}
+
+#define atomic24_add(i, v) ((void)__atomic24_add((i), (v)))
+#define atomic24_sub(i, v) ((void)__atomic24_sub((i), (v)))
+
+#define atomic24_dec_return(v) __atomic24_sub(1, (v))
+#define atomic24_inc_return(v) __atomic24_add(1, (v))
+
+#define atomic24_sub_and_test(i, v) (__atomic24_sub((i), (v)) == 0)
+#define atomic24_dec_and_test(v) (__atomic24_sub(1, (v)) == 0)
+
+#define atomic24_inc(v) ((void)__atomic24_add(1, (v)))
+#define atomic24_dec(v) ((void)__atomic24_sub(1, (v)))
+
+#define atomic24_add_negative(i, v) (__atomic24_add((i), (v)) < 0)
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ARCH_SPARC_ATOMIC__) */
diff --git a/include/asm-sparc/audioio.h b/include/asm-sparc/audioio.h
new file mode 100644
index 000000000000..cf16173f521b
--- /dev/null
+++ b/include/asm-sparc/audioio.h
@@ -0,0 +1,234 @@
+/*
+ * include/asm-sparc/audioio.h
+ *
+ * Sparc Audio Midlayer
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
+ */
+
+#ifndef _AUDIOIO_H_
+#define _AUDIOIO_H_
+
+/*
+ * SunOS/Solaris /dev/audio interface
+ */
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/ioctl.h>
+#endif
+
+/*
+ * This structure contains state information for audio device IO streams.
+ */
+typedef struct audio_prinfo {
+ /*
+ * The following values describe the audio data encoding.
+ */
+ unsigned int sample_rate; /* samples per second */
+ unsigned int channels; /* number of interleaved channels */
+ unsigned int precision; /* bit-width of each sample */
+ unsigned int encoding; /* data encoding method */
+
+ /*
+ * The following values control audio device configuration
+ */
+ unsigned int gain; /* gain level: 0 - 255 */
+ unsigned int port; /* selected I/O port (see below) */
+ unsigned int avail_ports; /* available I/O ports (see below) */
+ unsigned int _xxx[2]; /* Reserved for future use */
+
+ unsigned int buffer_size; /* I/O buffer size */
+
+ /*
+ * The following values describe driver state
+ */
+ unsigned int samples; /* number of samples converted */
+ unsigned int eof; /* End Of File counter (play only) */
+
+ unsigned char pause; /* non-zero for pause, zero to resume */
+ unsigned char error; /* non-zero if overflow/underflow */
+ unsigned char waiting; /* non-zero if a process wants access */
+ unsigned char balance; /* stereo channel balance */
+
+ unsigned short minordev;
+
+ /*
+ * The following values are read-only state flags
+ */
+ unsigned char open; /* non-zero if open access permitted */
+ unsigned char active; /* non-zero if I/O is active */
+} audio_prinfo_t;
+
+
+/*
+ * This structure describes the current state of the audio device.
+ */
+typedef struct audio_info {
+ /*
+ * Per-stream information
+ */
+ audio_prinfo_t play; /* output status information */
+ audio_prinfo_t record; /* input status information */
+
+ /*
+ * Per-unit/channel information
+ */
+ unsigned int monitor_gain; /* input to output mix: 0 - 255 */
+ unsigned char output_muted; /* non-zero if output is muted */
+ unsigned char _xxx[3]; /* Reserved for future use */
+ unsigned int _yyy[3]; /* Reserved for future use */
+} audio_info_t;
+
+
+/*
+ * Audio encoding types
+ */
+#define AUDIO_ENCODING_NONE (0) /* no encoding assigned */
+#define AUDIO_ENCODING_ULAW (1) /* u-law encoding */
+#define AUDIO_ENCODING_ALAW (2) /* A-law encoding */
+#define AUDIO_ENCODING_LINEAR (3) /* Linear PCM encoding */
+#define AUDIO_ENCODING_FLOAT (4) /* IEEE float (-1. <-> +1.) */
+#define AUDIO_ENCODING_DVI (104) /* DVI ADPCM */
+#define AUDIO_ENCODING_LINEAR8 (105) /* 8 bit UNSIGNED */
+#define AUDIO_ENCODING_LINEARLE (106) /* Linear PCM LE encoding */
+
+/*
+ * These ranges apply to record, play, and monitor gain values
+ */
+#define AUDIO_MIN_GAIN (0) /* minimum gain value */
+#define AUDIO_MAX_GAIN (255) /* maximum gain value */
+
+/*
+ * These values apply to the balance field to adjust channel gain values
+ */
+#define AUDIO_LEFT_BALANCE (0) /* left channel only */
+#define AUDIO_MID_BALANCE (32) /* equal left/right channel */
+#define AUDIO_RIGHT_BALANCE (64) /* right channel only */
+#define AUDIO_BALANCE_SHIFT (3)
+
+/*
+ * Generic minimum/maximum limits for number of channels, both modes
+ */
+#define AUDIO_MIN_PLAY_CHANNELS (1)
+#define AUDIO_MAX_PLAY_CHANNELS (4)
+#define AUDIO_MIN_REC_CHANNELS (1)
+#define AUDIO_MAX_REC_CHANNELS (4)
+
+/*
+ * Generic minimum/maximum limits for sample precision
+ */
+#define AUDIO_MIN_PLAY_PRECISION (8)
+#define AUDIO_MAX_PLAY_PRECISION (32)
+#define AUDIO_MIN_REC_PRECISION (8)
+#define AUDIO_MAX_REC_PRECISION (32)
+
+/*
+ * Define some convenient names for typical audio ports
+ */
+/*
+ * output ports (several may be enabled simultaneously)
+ */
+#define AUDIO_SPEAKER 0x01 /* output to built-in speaker */
+#define AUDIO_HEADPHONE 0x02 /* output to headphone jack */
+#define AUDIO_LINE_OUT 0x04 /* output to line out */
+
+/*
+ * input ports (usually only one at a time)
+ */
+#define AUDIO_MICROPHONE 0x01 /* input from microphone */
+#define AUDIO_LINE_IN 0x02 /* input from line in */
+#define AUDIO_CD 0x04 /* input from on-board CD inputs */
+#define AUDIO_INTERNAL_CD_IN AUDIO_CD /* input from internal CDROM */
+#define AUDIO_ANALOG_LOOPBACK 0x40 /* input from output */
+
+
+/*
+ * This macro initializes an audio_info structure to 'harmless' values.
+ * Note that (~0) might not be a harmless value for a flag that was
+ * a signed int.
+ */
+#define AUDIO_INITINFO(i) { \
+ unsigned int *__x__; \
+ for (__x__ = (unsigned int *)(i); \
+ (char *) __x__ < (((char *)(i)) + sizeof (audio_info_t)); \
+ *__x__++ = ~0); \
+}
+
+/*
+ * These allow testing for what the user wants to set
+ */
+#define AUD_INITVALUE (~0)
+#define Modify(X) ((unsigned int)(X) != AUD_INITVALUE)
+#define Modifys(X) ((X) != (unsigned short)AUD_INITVALUE)
+#define Modifyc(X) ((X) != (unsigned char)AUD_INITVALUE)
+
+/*
+ * Parameter for the AUDIO_GETDEV ioctl to determine current
+ * audio devices.
+ */
+#define MAX_AUDIO_DEV_LEN (16)
+typedef struct audio_device {
+ char name[MAX_AUDIO_DEV_LEN];
+ char version[MAX_AUDIO_DEV_LEN];
+ char config[MAX_AUDIO_DEV_LEN];
+} audio_device_t;
+
+
+/*
+ * Ioctl calls for the audio device.
+ */
+
+/*
+ * AUDIO_GETINFO retrieves the current state of the audio device.
+ *
+ * AUDIO_SETINFO copies all fields of the audio_info structure whose
+ * values are not set to the initialized value (-1) to the device state.
+ * It performs an implicit AUDIO_GETINFO to return the new state of the
+ * device. Note that the record.samples and play.samples fields are set
+ * to the last value before the AUDIO_SETINFO took effect. This allows
+ * an application to reset the counters while atomically retrieving the
+ * last value.
+ *
+ * AUDIO_DRAIN suspends the calling process until the write buffers are
+ * empty.
+ *
+ * AUDIO_GETDEV returns a structure of type audio_device_t which contains
+ * three strings. The string "name" is a short identifying string (for
+ * example, the SBus Fcode name string), the string "version" identifies
+ * the current version of the device, and the "config" string identifies
+ * the specific configuration of the audio stream. All fields are
+ * device-dependent -- see the device specific manual pages for details.
+ *
+ * AUDIO_GETDEV_SUNOS returns a number which is an audio device defined
+ * herein (making it not too portable)
+ *
+ * AUDIO_FLUSH stops all playback and recording, clears all queued buffers,
+ * resets error counters, and restarts recording and playback as appropriate
+ * for the current sampling mode.
+ */
+#define AUDIO_GETINFO _IOR('A', 1, audio_info_t)
+#define AUDIO_SETINFO _IOWR('A', 2, audio_info_t)
+#define AUDIO_DRAIN _IO('A', 3)
+#define AUDIO_GETDEV _IOR('A', 4, audio_device_t)
+#define AUDIO_GETDEV_SUNOS _IOR('A', 4, int)
+#define AUDIO_FLUSH _IO('A', 5)
+
+/* Define possible audio hardware configurations for
+ * old SunOS-style AUDIO_GETDEV ioctl */
+#define AUDIO_DEV_UNKNOWN (0) /* not defined */
+#define AUDIO_DEV_AMD (1) /* audioamd device */
+#define AUDIO_DEV_SPEAKERBOX (2) /* dbri device with speakerbox */
+#define AUDIO_DEV_CODEC (3) /* dbri device (internal speaker) */
+#define AUDIO_DEV_CS4231 (5) /* cs4231 device */
+
+/*
+ * The following ioctl sets the audio device into an internal loopback mode,
+ * if the hardware supports this. The argument is TRUE to set loopback,
+ * FALSE to reset to normal operation. If the hardware does not support
+ * internal loopback, the ioctl should fail with EINVAL.
+ * Causes ADC data to be digitally mixed in and sent to the DAC.
+ */
+#define AUDIO_DIAG_LOOPBACK _IOW('A', 101, int)
+
+#endif /* _AUDIOIO_H_ */
diff --git a/include/asm-sparc/auxio.h b/include/asm-sparc/auxio.h
new file mode 100644
index 000000000000..ee83aefb20dc
--- /dev/null
+++ b/include/asm-sparc/auxio.h
@@ -0,0 +1,89 @@
+/* $Id: auxio.h,v 1.18 1997/11/07 15:01:45 jj Exp $
+ * auxio.h: Definitions and code for the Auxiliary I/O register.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_AUXIO_H
+#define _SPARC_AUXIO_H
+
+#include <asm/system.h>
+#include <asm/vaddrs.h>
+
+/* This register is an unsigned char in IO space. It does two things.
+ * First, it is used to control the front panel LED light on machines
+ * that have it (good for testing entry points to trap handlers and irq's)
+ * Secondly, it controls various floppy drive parameters.
+ */
+#define AUXIO_ORMEIN 0xf0 /* All writes must set these bits. */
+#define AUXIO_ORMEIN4M 0xc0 /* sun4m - All writes must set these bits. */
+#define AUXIO_FLPY_DENS 0x20 /* Floppy density, high if set. Read only. */
+#define AUXIO_FLPY_DCHG 0x10 /* A disk change occurred. Read only. */
+#define AUXIO_EDGE_ON 0x10 /* sun4m - On means Jumper block is in. */
+#define AUXIO_FLPY_DSEL 0x08 /* Drive select/start-motor. Write only. */
+#define AUXIO_LINK_TEST 0x08 /* sun4m - On means TPE Carrier detect. */
+
+/* Set the following to one, then zero, after doing a pseudo DMA transfer. */
+#define AUXIO_FLPY_TCNT 0x04 /* Floppy terminal count. Write only. */
+
+/* Set the following to zero to eject the floppy. */
+#define AUXIO_FLPY_EJCT 0x02 /* Eject floppy disk. Write only. */
+#define AUXIO_LED 0x01 /* On if set, off if unset. Read/Write */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * NOTE: these routines are implementation dependent--
+ * understand the hardware you are querying!
+ */
+extern void set_auxio(unsigned char bits_on, unsigned char bits_off);
+extern unsigned char get_auxio(void); /* .../asm-sparc/floppy.h */
+
+/*
+ * The following routines are provided for driver-compatibility
+ * with sparc64 (primarily sunlance.c)
+ */
+
+#define AUXIO_LTE_ON 1
+#define AUXIO_LTE_OFF 0
+
+/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
+ *
+ * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
+ */
+#define auxio_set_lte(on) \
+do { \
+ if(on) { \
+ set_auxio(AUXIO_LINK_TEST, 0); \
+ } else { \
+ set_auxio(0, AUXIO_LINK_TEST); \
+ } \
+} while (0)
+
+#define AUXIO_LED_ON 1
+#define AUXIO_LED_OFF 0
+
+/* auxio_set_led - Set system front panel LED
+ *
+ * on - AUXIO_LED_ON or AUXIO_LED_OFF
+ */
+#define auxio_set_led(on) \
+do { \
+ if(on) { \
+ set_auxio(AUXIO_LED, 0); \
+ } else { \
+ set_auxio(0, AUXIO_LED); \
+ } \
+} while (0)
+
+#endif /* !(__ASSEMBLY__) */
+
+
+/* AUXIO2 (Power Off Control) */
+extern __volatile__ unsigned char * auxio_power_register;
+
+#define AUXIO_POWER_DETECT_FAILURE 32
+#define AUXIO_POWER_CLEAR_FAILURE 2
+#define AUXIO_POWER_OFF 1
+
+
+#endif /* !(_SPARC_AUXIO_H) */
diff --git a/include/asm-sparc/bitext.h b/include/asm-sparc/bitext.h
new file mode 100644
index 000000000000..297b2f2fcb49
--- /dev/null
+++ b/include/asm-sparc/bitext.h
@@ -0,0 +1,27 @@
+/*
+ * bitext.h: Bit string operations on the sparc, specific to architecture.
+ *
+ * Copyright 2002 Pete Zaitcev <zaitcev@yahoo.com>
+ */
+
+#ifndef _SPARC_BITEXT_H
+#define _SPARC_BITEXT_H
+
+#include <linux/spinlock.h>
+
+struct bit_map {
+ spinlock_t lock;
+ unsigned long *map;
+ int size;
+ int used;
+ int last_off;
+ int last_size;
+ int first_free;
+ int num_colors;
+};
+
+extern int bit_map_string_get(struct bit_map *t, int len, int align);
+extern void bit_map_clear(struct bit_map *t, int offset, int len);
+extern void bit_map_init(struct bit_map *t, unsigned long *map, int size);
+
+#endif /* defined(_SPARC_BITEXT_H) */
diff --git a/include/asm-sparc/bitops.h b/include/asm-sparc/bitops.h
new file mode 100644
index 000000000000..bfbd795a0a80
--- /dev/null
+++ b/include/asm-sparc/bitops.h
@@ -0,0 +1,537 @@
+/* $Id: bitops.h,v 1.67 2001/11/19 18:36:34 davem Exp $
+ * bitops.h: Bit string operations on the Sparc.
+ *
+ * Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1996 Eddie C. Dost (ecd@skynet.be)
+ * Copyright 2001 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef _SPARC_BITOPS_H
+#define _SPARC_BITOPS_H
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+#ifdef __KERNEL__
+
+/*
+ * Set bit 'nr' in 32-bit quantity at address 'addr' where bit '0'
+ * is in the highest of the four bytes and bit '31' is the high bit
+ * within the first byte. Sparc is BIG-Endian. Unless noted otherwise
+ * all bit-ops return 0 if bit was previously clear and != 0 otherwise.
+ */
+static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ register unsigned long mask asm("g2");
+ register unsigned long *ADDR asm("g1");
+ register int tmp1 asm("g3");
+ register int tmp2 asm("g4");
+ register int tmp3 asm("g5");
+ register int tmp4 asm("g7");
+
+ ADDR = ((unsigned long *) addr) + (nr >> 5);
+ mask = 1 << (nr & 31);
+
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___set_bit\n\t"
+ " add %%o7, 8, %%o7\n"
+ : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
+ : "0" (mask), "r" (ADDR)
+ : "memory", "cc");
+
+ return mask != 0;
+}
+
+static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ register unsigned long mask asm("g2");
+ register unsigned long *ADDR asm("g1");
+ register int tmp1 asm("g3");
+ register int tmp2 asm("g4");
+ register int tmp3 asm("g5");
+ register int tmp4 asm("g7");
+
+ ADDR = ((unsigned long *) addr) + (nr >> 5);
+ mask = 1 << (nr & 31);
+
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___set_bit\n\t"
+ " add %%o7, 8, %%o7\n"
+ : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
+ : "0" (mask), "r" (ADDR)
+ : "memory", "cc");
+}
+
+static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ register unsigned long mask asm("g2");
+ register unsigned long *ADDR asm("g1");
+ register int tmp1 asm("g3");
+ register int tmp2 asm("g4");
+ register int tmp3 asm("g5");
+ register int tmp4 asm("g7");
+
+ ADDR = ((unsigned long *) addr) + (nr >> 5);
+ mask = 1 << (nr & 31);
+
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___clear_bit\n\t"
+ " add %%o7, 8, %%o7\n"
+ : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
+ : "0" (mask), "r" (ADDR)
+ : "memory", "cc");
+
+ return mask != 0;
+}
+
+static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ register unsigned long mask asm("g2");
+ register unsigned long *ADDR asm("g1");
+ register int tmp1 asm("g3");
+ register int tmp2 asm("g4");
+ register int tmp3 asm("g5");
+ register int tmp4 asm("g7");
+
+ ADDR = ((unsigned long *) addr) + (nr >> 5);
+ mask = 1 << (nr & 31);
+
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___clear_bit\n\t"
+ " add %%o7, 8, %%o7\n"
+ : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
+ : "0" (mask), "r" (ADDR)
+ : "memory", "cc");
+}
+
+static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ register unsigned long mask asm("g2");
+ register unsigned long *ADDR asm("g1");
+ register int tmp1 asm("g3");
+ register int tmp2 asm("g4");
+ register int tmp3 asm("g5");
+ register int tmp4 asm("g7");
+
+ ADDR = ((unsigned long *) addr) + (nr >> 5);
+ mask = 1 << (nr & 31);
+
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___change_bit\n\t"
+ " add %%o7, 8, %%o7\n"
+ : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
+ : "0" (mask), "r" (ADDR)
+ : "memory", "cc");
+
+ return mask != 0;
+}
+
+static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ register unsigned long mask asm("g2");
+ register unsigned long *ADDR asm("g1");
+ register int tmp1 asm("g3");
+ register int tmp2 asm("g4");
+ register int tmp3 asm("g5");
+ register int tmp4 asm("g7");
+
+ ADDR = ((unsigned long *) addr) + (nr >> 5);
+ mask = 1 << (nr & 31);
+
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___change_bit\n\t"
+ " add %%o7, 8, %%o7\n"
+ : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
+ : "0" (mask), "r" (ADDR)
+ : "memory", "cc");
+}
+
+/*
+ * non-atomic versions
+ */
+static inline void __set_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = 1UL << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+ *p |= mask;
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = 1UL << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+ *p &= ~mask;
+}
+
+static inline void __change_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = 1UL << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+ *p ^= mask;
+}
+
+static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = 1UL << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+ unsigned long old = *p;
+
+ *p = old | mask;
+ return (old & mask) != 0;
+}
+
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = 1UL << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+ unsigned long old = *p;
+
+ *p = old & ~mask;
+ return (old & mask) != 0;
+}
+
+static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = 1UL << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+ unsigned long old = *p;
+
+ *p = old ^ mask;
+ return (old & mask) != 0;
+}
+
+#define smp_mb__before_clear_bit() do { } while(0)
+#define smp_mb__after_clear_bit() do { } while(0)
+
+/* The following routine need not be atomic. */
+static inline int test_bit(int nr, __const__ volatile unsigned long *addr)
+{
+ return (1UL & (((unsigned long *)addr)[nr >> 5] >> (nr & 31))) != 0UL;
+}
+
+/* The easy/cheese version for now. */
+static inline unsigned long ffz(unsigned long word)
+{
+ unsigned long result = 0;
+
+ while(word & 1) {
+ result++;
+ word >>= 1;
+ }
+ return result;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline int __ffs(unsigned long word)
+{
+ int num = 0;
+
+ if ((word & 0xffff) == 0) {
+ num += 16;
+ word >>= 16;
+ }
+ if ((word & 0xff) == 0) {
+ num += 8;
+ word >>= 8;
+ }
+ if ((word & 0xf) == 0) {
+ num += 4;
+ word >>= 4;
+ }
+ if ((word & 0x3) == 0) {
+ num += 2;
+ word >>= 2;
+ }
+ if ((word & 0x1) == 0)
+ num += 1;
+ return num;
+}
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+
+ if (unlikely(b[0]))
+ return __ffs(b[0]);
+ if (unlikely(b[1]))
+ return __ffs(b[1]) + 32;
+ if (unlikely(b[2]))
+ return __ffs(b[2]) + 64;
+ if (b[3])
+ return __ffs(b[3]) + 96;
+ return __ffs(b[4]) + 128;
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static inline int ffs(int x)
+{
+ if (!x)
+ return 0;
+ return __ffs((unsigned long)x) + 1;
+}
+
+/*
+ * fls: find last (most-significant) bit set.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+#define fls(x) generic_fls(x)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+/*
+ * find_next_zero_bit() finds the first zero bit in a bit string of length
+ * 'size' bits, starting the search at bit 'offset'. This is largely based
+ * on Linus's ALPHA routines, which are pretty portable BTW.
+ */
+static inline unsigned long find_next_zero_bit(const unsigned long *addr,
+ unsigned long size, unsigned long offset)
+{
+ const unsigned long *p = addr + (offset >> 5);
+ unsigned long result = offset & ~31UL;
+ unsigned long tmp;
+
+ if (offset >= size)
+ return size;
+ size -= result;
+ offset &= 31UL;
+ if (offset) {
+ tmp = *(p++);
+ tmp |= ~0UL >> (32-offset);
+ if (size < 32)
+ goto found_first;
+ if (~tmp)
+ goto found_middle;
+ size -= 32;
+ result += 32;
+ }
+ while (size & ~31UL) {
+ if (~(tmp = *(p++)))
+ goto found_middle;
+ result += 32;
+ size -= 32;
+ }
+ if (!size)
+ return result;
+ tmp = *p;
+
+found_first:
+ tmp |= ~0UL << size;
+ if (tmp == ~0UL) /* Are any bits zero? */
+ return result + size; /* Nope. */
+found_middle:
+ return result + ffz(tmp);
+}
+
+/*
+ * Linus sez that gcc can optimize the following correctly, we'll see if this
+ * holds on the Sparc as it does for the ALPHA.
+ */
+#define find_first_zero_bit(addr, size) \
+ find_next_zero_bit((addr), (size), 0)
+
+/**
+ * find_next_bit - find the first set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ *
+ * Scheduler induced bitop, do not use.
+ */
+static inline int find_next_bit(const unsigned long *addr, int size, int offset)
+{
+ const unsigned long *p = addr + (offset >> 5);
+ int num = offset & ~0x1f;
+ unsigned long word;
+
+ word = *p++;
+ word &= ~((1 << (offset & 0x1f)) - 1);
+ while (num < size) {
+ if (word != 0) {
+ return __ffs(word) + num;
+ }
+ word = *p++;
+ num += 0x20;
+ }
+ return num;
+}
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+#define find_first_bit(addr, size) \
+ find_next_bit((addr), (size), 0)
+
+/*
+ */
+static inline int test_le_bit(int nr, __const__ unsigned long * addr)
+{
+ __const__ unsigned char *ADDR = (__const__ unsigned char *) addr;
+ return (ADDR[nr >> 3] >> (nr & 7)) & 1;
+}
+
+/*
+ * non-atomic versions
+ */
+static inline void __set_le_bit(int nr, unsigned long *addr)
+{
+ unsigned char *ADDR = (unsigned char *)addr;
+
+ ADDR += nr >> 3;
+ *ADDR |= 1 << (nr & 0x07);
+}
+
+static inline void __clear_le_bit(int nr, unsigned long *addr)
+{
+ unsigned char *ADDR = (unsigned char *)addr;
+
+ ADDR += nr >> 3;
+ *ADDR &= ~(1 << (nr & 0x07));
+}
+
+static inline int __test_and_set_le_bit(int nr, unsigned long *addr)
+{
+ int mask, retval;
+ unsigned char *ADDR = (unsigned char *)addr;
+
+ ADDR += nr >> 3;
+ mask = 1 << (nr & 0x07);
+ retval = (mask & *ADDR) != 0;
+ *ADDR |= mask;
+ return retval;
+}
+
+static inline int __test_and_clear_le_bit(int nr, unsigned long *addr)
+{
+ int mask, retval;
+ unsigned char *ADDR = (unsigned char *)addr;
+
+ ADDR += nr >> 3;
+ mask = 1 << (nr & 0x07);
+ retval = (mask & *ADDR) != 0;
+ *ADDR &= ~mask;
+ return retval;
+}
+
+static inline unsigned long find_next_zero_le_bit(const unsigned long *addr,
+ unsigned long size, unsigned long offset)
+{
+ const unsigned long *p = addr + (offset >> 5);
+ unsigned long result = offset & ~31UL;
+ unsigned long tmp;
+
+ if (offset >= size)
+ return size;
+ size -= result;
+ offset &= 31UL;
+ if(offset) {
+ tmp = *(p++);
+ tmp |= __swab32(~0UL >> (32-offset));
+ if(size < 32)
+ goto found_first;
+ if(~tmp)
+ goto found_middle;
+ size -= 32;
+ result += 32;
+ }
+ while(size & ~31UL) {
+ if(~(tmp = *(p++)))
+ goto found_middle;
+ result += 32;
+ size -= 32;
+ }
+ if(!size)
+ return result;
+ tmp = *p;
+
+found_first:
+ tmp = __swab32(tmp) | (~0UL << size);
+ if (tmp == ~0UL) /* Are any bits zero? */
+ return result + size; /* Nope. */
+ return result + ffz(tmp);
+
+found_middle:
+ return result + ffz(__swab32(tmp));
+}
+
+#define find_first_zero_le_bit(addr, size) \
+ find_next_zero_le_bit((addr), (size), 0)
+
+#define ext2_set_bit(nr,addr) \
+ __test_and_set_le_bit((nr),(unsigned long *)(addr))
+#define ext2_clear_bit(nr,addr) \
+ __test_and_clear_le_bit((nr),(unsigned long *)(addr))
+
+#define ext2_set_bit_atomic(lock, nr, addr) \
+ ({ \
+ int ret; \
+ spin_lock(lock); \
+ ret = ext2_set_bit((nr), (unsigned long *)(addr)); \
+ spin_unlock(lock); \
+ ret; \
+ })
+
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+ ({ \
+ int ret; \
+ spin_lock(lock); \
+ ret = ext2_clear_bit((nr), (unsigned long *)(addr)); \
+ spin_unlock(lock); \
+ ret; \
+ })
+
+#define ext2_test_bit(nr,addr) \
+ test_le_bit((nr),(unsigned long *)(addr))
+#define ext2_find_first_zero_bit(addr, size) \
+ find_first_zero_le_bit((unsigned long *)(addr), (size))
+#define ext2_find_next_zero_bit(addr, size, off) \
+ find_next_zero_le_bit((unsigned long *)(addr), (size), (off))
+
+/* Bitmap functions for the minix filesystem. */
+#define minix_test_and_set_bit(nr,addr) \
+ test_and_set_bit((nr),(unsigned long *)(addr))
+#define minix_set_bit(nr,addr) \
+ set_bit((nr),(unsigned long *)(addr))
+#define minix_test_and_clear_bit(nr,addr) \
+ test_and_clear_bit((nr),(unsigned long *)(addr))
+#define minix_test_bit(nr,addr) \
+ test_bit((nr),(unsigned long *)(addr))
+#define minix_find_first_zero_bit(addr,size) \
+ find_first_zero_bit((unsigned long *)(addr),(size))
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(_SPARC_BITOPS_H) */
diff --git a/include/asm-sparc/bpp.h b/include/asm-sparc/bpp.h
new file mode 100644
index 000000000000..3578ac113cf0
--- /dev/null
+++ b/include/asm-sparc/bpp.h
@@ -0,0 +1,73 @@
+#ifndef _SPARC_BPP_H
+#define _SPARC_BPP_H
+
+/*
+ * Copyright (c) 1995 Picture Elements
+ * Stephen Williams
+ * Gus Baldauf
+ *
+ * Linux/SPARC port by Peter Zaitcev.
+ * Integration into SPARC tree by Tom Dyas.
+ */
+
+#include <linux/ioctl.h>
+
+/*
+ * This is a driver that supports IEEE Std 1284-1994 communications
+ * with compliant or compatible devices. It will use whatever features
+ * the device supports, prefering those that are typically faster.
+ *
+ * When the device is opened, it is left in COMPATABILITY mode, and
+ * writes work like any printer device. The driver only attempt to
+ * negotiate 1284 modes when needed so that plugs can be pulled,
+ * switch boxes switched, etc., without disrupting things. It will
+ * also leave the device in compatibility mode when closed.
+ */
+
+
+
+/*
+ * This driver also supplies ioctls to manually manipulate the
+ * pins. This is great for testing devices, or writing code to deal
+ * with bizzarro-mode of the ACME Special TurboThingy Plus.
+ *
+ * NOTE: These ioctl currently do not interact well with
+ * read/write. Caveat emptor.
+ *
+ * PUT_PINS allows us to assign the sense of all the pins, including
+ * the data pins if being driven by the host. The GET_PINS returns the
+ * pins that the peripheral drives, including data if appropriate.
+ */
+
+# define BPP_PUT_PINS _IOW('B', 1, int)
+# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */
+# define BPP_PUT_DATA _IOW('B', 3, int)
+# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */
+
+/*
+ * Set the data bus to input mode. Disengage the data bin driver and
+ * be prepared to read values from the peripheral. If the arg is 0,
+ * then revert the bus to output mode.
+ */
+# define BPP_SET_INPUT _IOW('B', 5, int)
+
+/*
+ * These bits apply to the PUT operation...
+ */
+# define BPP_PP_nStrobe 0x0001
+# define BPP_PP_nAutoFd 0x0002
+# define BPP_PP_nInit 0x0004
+# define BPP_PP_nSelectIn 0x0008
+
+/*
+ * These apply to the GET operation, which also reads the current value
+ * of the previously put values. A bit mask of these will be returned
+ * as a bit mask in the return code of the ioctl().
+ */
+# define BPP_GP_nAck 0x0100
+# define BPP_GP_Busy 0x0200
+# define BPP_GP_PError 0x0400
+# define BPP_GP_Select 0x0800
+# define BPP_GP_nFault 0x1000
+
+#endif
diff --git a/include/asm-sparc/bsderrno.h b/include/asm-sparc/bsderrno.h
new file mode 100644
index 000000000000..54a75be43abb
--- /dev/null
+++ b/include/asm-sparc/bsderrno.h
@@ -0,0 +1,94 @@
+/* $Id: bsderrno.h,v 1.3 1996/04/25 06:12:47 davem Exp $
+ * bsderrno.h: Error numbers for NetBSD binary compatibility
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_BSDERRNO_H
+#define _SPARC_BSDERRNO_H
+
+#define BSD_EPERM 1 /* Operation not permitted */
+#define BSD_ENOENT 2 /* No such file or directory */
+#define BSD_ESRCH 3 /* No such process */
+#define BSD_EINTR 4 /* Interrupted system call */
+#define BSD_EIO 5 /* Input/output error */
+#define BSD_ENXIO 6 /* Device not configured */
+#define BSD_E2BIG 7 /* Argument list too long */
+#define BSD_ENOEXEC 8 /* Exec format error */
+#define BSD_EBADF 9 /* Bad file descriptor */
+#define BSD_ECHILD 10 /* No child processes */
+#define BSD_EDEADLK 11 /* Resource deadlock avoided */
+#define BSD_ENOMEM 12 /* Cannot allocate memory */
+#define BSD_EACCES 13 /* Permission denied */
+#define BSD_EFAULT 14 /* Bad address */
+#define BSD_ENOTBLK 15 /* Block device required */
+#define BSD_EBUSY 16 /* Device busy */
+#define BSD_EEXIST 17 /* File exists */
+#define BSD_EXDEV 18 /* Cross-device link */
+#define BSD_ENODEV 19 /* Operation not supported by device */
+#define BSD_ENOTDIR 20 /* Not a directory */
+#define BSD_EISDIR 21 /* Is a directory */
+#define BSD_EINVAL 22 /* Invalid argument */
+#define BSD_ENFILE 23 /* Too many open files in system */
+#define BSD_EMFILE 24 /* Too many open files */
+#define BSD_ENOTTY 25 /* Inappropriate ioctl for device */
+#define BSD_ETXTBSY 26 /* Text file busy */
+#define BSD_EFBIG 27 /* File too large */
+#define BSD_ENOSPC 28 /* No space left on device */
+#define BSD_ESPIPE 29 /* Illegal seek */
+#define BSD_EROFS 30 /* Read-only file system */
+#define BSD_EMLINK 31 /* Too many links */
+#define BSD_EPIPE 32 /* Broken pipe */
+#define BSD_EDOM 33 /* Numerical argument out of domain */
+#define BSD_ERANGE 34 /* Result too large */
+#define BSD_EAGAIN 35 /* Resource temporarily unavailable */
+#define BSD_EWOULDBLOCK EAGAIN /* Operation would block */
+#define BSD_EINPROGRESS 36 /* Operation now in progress */
+#define BSD_EALREADY 37 /* Operation already in progress */
+#define BSD_ENOTSOCK 38 /* Socket operation on non-socket */
+#define BSD_EDESTADDRREQ 39 /* Destination address required */
+#define BSD_EMSGSIZE 40 /* Message too long */
+#define BSD_EPROTOTYPE 41 /* Protocol wrong type for socket */
+#define BSD_ENOPROTOOPT 42 /* Protocol not available */
+#define BSD_EPROTONOSUPPORT 43 /* Protocol not supported */
+#define BSD_ESOCKTNOSUPPORT 44 /* Socket type not supported */
+#define BSD_EOPNOTSUPP 45 /* Operation not supported */
+#define BSD_EPFNOSUPPORT 46 /* Protocol family not supported */
+#define BSD_EAFNOSUPPORT 47 /* Address family not supported by protocol family */
+#define BSD_EADDRINUSE 48 /* Address already in use */
+#define BSD_EADDRNOTAVAIL 49 /* Can't assign requested address */
+#define BSD_ENETDOWN 50 /* Network is down */
+#define BSD_ENETUNREACH 51 /* Network is unreachable */
+#define BSD_ENETRESET 52 /* Network dropped connection on reset */
+#define BSD_ECONNABORTED 53 /* Software caused connection abort */
+#define BSD_ECONNRESET 54 /* Connection reset by peer */
+#define BSD_ENOBUFS 55 /* No buffer space available */
+#define BSD_EISCONN 56 /* Socket is already connected */
+#define BSD_ENOTCONN 57 /* Socket is not connected */
+#define BSD_ESHUTDOWN 58 /* Can't send after socket shutdown */
+#define BSD_ETOOMANYREFS 59 /* Too many references: can't splice */
+#define BSD_ETIMEDOUT 60 /* Operation timed out */
+#define BSD_ECONNREFUSED 61 /* Connection refused */
+#define BSD_ELOOP 62 /* Too many levels of symbolic links */
+#define BSD_ENAMETOOLONG 63 /* File name too long */
+#define BSD_EHOSTDOWN 64 /* Host is down */
+#define BSD_EHOSTUNREACH 65 /* No route to host */
+#define BSD_ENOTEMPTY 66 /* Directory not empty */
+#define BSD_EPROCLIM 67 /* Too many processes */
+#define BSD_EUSERS 68 /* Too many users */
+#define BSD_EDQUOT 69 /* Disc quota exceeded */
+#define BSD_ESTALE 70 /* Stale NFS file handle */
+#define BSD_EREMOTE 71 /* Too many levels of remote in path */
+#define BSD_EBADRPC 72 /* RPC struct is bad */
+#define BSD_ERPCMISMATCH 73 /* RPC version wrong */
+#define BSD_EPROGUNAVAIL 74 /* RPC prog. not avail */
+#define BSD_EPROGMISMATCH 75 /* Program version wrong */
+#define BSD_EPROCUNAVAIL 76 /* Bad procedure for program */
+#define BSD_ENOLCK 77 /* No locks available */
+#define BSD_ENOSYS 78 /* Function not implemented */
+#define BSD_EFTYPE 79 /* Inappropriate file type or format */
+#define BSD_EAUTH 80 /* Authentication error */
+#define BSD_ENEEDAUTH 81 /* Need authenticator */
+#define BSD_ELAST 81 /* Must be equal largest errno */
+
+#endif /* !(_SPARC_BSDERRNO_H) */
diff --git a/include/asm-sparc/btfixup.h b/include/asm-sparc/btfixup.h
new file mode 100644
index 000000000000..b84c96c89581
--- /dev/null
+++ b/include/asm-sparc/btfixup.h
@@ -0,0 +1,208 @@
+/* $Id: btfixup.h,v 1.4 1998/03/09 14:04:43 jj Exp $
+ * asm-sparc/btfixup.h: Macros for boot time linking.
+ *
+ * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef _SPARC_BTFIXUP_H
+#define _SPARC_BTFIXUP_H
+
+#include <linux/init.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef MODULE
+extern unsigned int ___illegal_use_of_BTFIXUP_SIMM13_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_SETHI_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_HALF_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void);
+
+#define BTFIXUP_SIMM13(__name) ___illegal_use_of_BTFIXUP_SIMM13_in_module()
+#define BTFIXUP_HALF(__name) ___illegal_use_of_BTFIXUP_HALF_in_module()
+#define BTFIXUP_SETHI(__name) ___illegal_use_of_BTFIXUP_SETHI_in_module()
+#define BTFIXUP_INT(__name) ___illegal_use_of_BTFIXUP_INT_in_module()
+#define BTFIXUP_BLACKBOX(__name) ___illegal_use_of_BTFIXUP_BLACKBOX_in_module
+
+#else
+
+#define BTFIXUP_SIMM13(__name) ___sf_##__name()
+#define BTFIXUP_HALF(__name) ___af_##__name()
+#define BTFIXUP_SETHI(__name) ___hf_##__name()
+#define BTFIXUP_INT(__name) ((unsigned int)&___i_##__name)
+/* This must be written in assembly and present in a sethi */
+#define BTFIXUP_BLACKBOX(__name) ___b_##__name
+#endif /* MODULE */
+
+/* Fixup call xx */
+
+#define BTFIXUPDEF_CALL(__type, __name, __args...) \
+ extern __type ___f_##__name(__args); \
+ extern unsigned ___fs_##__name[3];
+#define BTFIXUPDEF_CALL_CONST(__type, __name, __args...) \
+ extern __type ___f_##__name(__args) __attribute_const__; \
+ extern unsigned ___fs_##__name[3];
+#define BTFIXUP_CALL(__name) ___f_##__name
+
+#define BTFIXUPDEF_BLACKBOX(__name) \
+ extern unsigned ___bs_##__name[2];
+
+/* Put bottom 13bits into some register variable */
+
+#define BTFIXUPDEF_SIMM13(__name) \
+ extern unsigned int ___sf_##__name(void) __attribute_const__; \
+ extern unsigned ___ss_##__name[2]; \
+ extern __inline__ unsigned int ___sf_##__name(void) { \
+ unsigned int ret; \
+ __asm__ ("or %%g0, ___s_" #__name ", %0" : "=r"(ret)); \
+ return ret; \
+ }
+#define BTFIXUPDEF_SIMM13_INIT(__name,__val) \
+ extern unsigned int ___sf_##__name(void) __attribute_const__; \
+ extern unsigned ___ss_##__name[2]; \
+ extern __inline__ unsigned int ___sf_##__name(void) { \
+ unsigned int ret; \
+ __asm__ ("or %%g0, ___s_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
+ return ret; \
+ }
+
+/* Put either bottom 13 bits, or upper 22 bits into some register variable
+ * (depending on the value, this will lead into sethi FIX, reg; or
+ * mov FIX, reg; )
+ */
+
+#define BTFIXUPDEF_HALF(__name) \
+ extern unsigned int ___af_##__name(void) __attribute_const__; \
+ extern unsigned ___as_##__name[2]; \
+ extern __inline__ unsigned int ___af_##__name(void) { \
+ unsigned int ret; \
+ __asm__ ("or %%g0, ___a_" #__name ", %0" : "=r"(ret)); \
+ return ret; \
+ }
+#define BTFIXUPDEF_HALF_INIT(__name,__val) \
+ extern unsigned int ___af_##__name(void) __attribute_const__; \
+ extern unsigned ___as_##__name[2]; \
+ extern __inline__ unsigned int ___af_##__name(void) { \
+ unsigned int ret; \
+ __asm__ ("or %%g0, ___a_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
+ return ret; \
+ }
+
+/* Put upper 22 bits into some register variable */
+
+#define BTFIXUPDEF_SETHI(__name) \
+ extern unsigned int ___hf_##__name(void) __attribute_const__; \
+ extern unsigned ___hs_##__name[2]; \
+ extern __inline__ unsigned int ___hf_##__name(void) { \
+ unsigned int ret; \
+ __asm__ ("sethi %%hi(___h_" #__name "), %0" : "=r"(ret)); \
+ return ret; \
+ }
+#define BTFIXUPDEF_SETHI_INIT(__name,__val) \
+ extern unsigned int ___hf_##__name(void) __attribute_const__; \
+ extern unsigned ___hs_##__name[2]; \
+ extern __inline__ unsigned int ___hf_##__name(void) { \
+ unsigned int ret; \
+ __asm__ ("sethi %%hi(___h_" #__name "__btset_" #__val "), %0" : \
+ "=r"(ret)); \
+ return ret; \
+ }
+
+/* Put a full 32bit integer into some register variable */
+
+#define BTFIXUPDEF_INT(__name) \
+ extern unsigned char ___i_##__name; \
+ extern unsigned ___is_##__name[2];
+
+#define BTFIXUPCALL_NORM 0x00000000 /* Always call */
+#define BTFIXUPCALL_NOP 0x01000000 /* Possibly optimize to nop */
+#define BTFIXUPCALL_RETINT(i) (0x90102000|((i) & 0x1fff)) /* Possibly optimize to mov i, %o0 */
+#define BTFIXUPCALL_ORINT(i) (0x90122000|((i) & 0x1fff)) /* Possibly optimize to or %o0, i, %o0 */
+#define BTFIXUPCALL_RETO0 0x01000000 /* Return first parameter, actually a nop */
+#define BTFIXUPCALL_ANDNINT(i) (0x902a2000|((i) & 0x1fff)) /* Possibly optimize to andn %o0, i, %o0 */
+#define BTFIXUPCALL_SWAPO0O1 0xd27a0000 /* Possibly optimize to swap [%o0],%o1 */
+#define BTFIXUPCALL_SWAPO0G0 0xc07a0000 /* Possibly optimize to swap [%o0],%g0 */
+#define BTFIXUPCALL_SWAPG1G2 0xc4784000 /* Possibly optimize to swap [%g1],%g2 */
+#define BTFIXUPCALL_STG0O0 0xc0220000 /* Possibly optimize to st %g0,[%o0] */
+#define BTFIXUPCALL_STO1O0 0xd2220000 /* Possibly optimize to st %o1,[%o0] */
+
+#define BTFIXUPSET_CALL(__name, __addr, __insn) \
+ do { \
+ ___fs_##__name[0] |= 1; \
+ ___fs_##__name[1] = (unsigned long)__addr; \
+ ___fs_##__name[2] = __insn; \
+ } while (0)
+
+#define BTFIXUPSET_BLACKBOX(__name, __func) \
+ do { \
+ ___bs_##__name[0] |= 1; \
+ ___bs_##__name[1] = (unsigned long)__func; \
+ } while (0)
+
+#define BTFIXUPCOPY_CALL(__name, __from) \
+ do { \
+ ___fs_##__name[0] |= 1; \
+ ___fs_##__name[1] = ___fs_##__from[1]; \
+ ___fs_##__name[2] = ___fs_##__from[2]; \
+ } while (0)
+
+#define BTFIXUPSET_SIMM13(__name, __val) \
+ do { \
+ ___ss_##__name[0] |= 1; \
+ ___ss_##__name[1] = (unsigned)__val; \
+ } while (0)
+
+#define BTFIXUPCOPY_SIMM13(__name, __from) \
+ do { \
+ ___ss_##__name[0] |= 1; \
+ ___ss_##__name[1] = ___ss_##__from[1]; \
+ } while (0)
+
+#define BTFIXUPSET_HALF(__name, __val) \
+ do { \
+ ___as_##__name[0] |= 1; \
+ ___as_##__name[1] = (unsigned)__val; \
+ } while (0)
+
+#define BTFIXUPCOPY_HALF(__name, __from) \
+ do { \
+ ___as_##__name[0] |= 1; \
+ ___as_##__name[1] = ___as_##__from[1]; \
+ } while (0)
+
+#define BTFIXUPSET_SETHI(__name, __val) \
+ do { \
+ ___hs_##__name[0] |= 1; \
+ ___hs_##__name[1] = (unsigned)__val; \
+ } while (0)
+
+#define BTFIXUPCOPY_SETHI(__name, __from) \
+ do { \
+ ___hs_##__name[0] |= 1; \
+ ___hs_##__name[1] = ___hs_##__from[1]; \
+ } while (0)
+
+#define BTFIXUPSET_INT(__name, __val) \
+ do { \
+ ___is_##__name[0] |= 1; \
+ ___is_##__name[1] = (unsigned)__val; \
+ } while (0)
+
+#define BTFIXUPCOPY_INT(__name, __from) \
+ do { \
+ ___is_##__name[0] |= 1; \
+ ___is_##__name[1] = ___is_##__from[1]; \
+ } while (0)
+
+#define BTFIXUPVAL_CALL(__name) \
+ ((unsigned long)___fs_##__name[1])
+
+extern void btfixup(void);
+
+#else /* __ASSEMBLY__ */
+
+#define BTFIXUP_SETHI(__name) %hi(___h_ ## __name)
+#define BTFIXUP_SETHI_INIT(__name,__val) %hi(___h_ ## __name ## __btset_ ## __val)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* !(_SPARC_BTFIXUP_H) */
diff --git a/include/asm-sparc/bug.h b/include/asm-sparc/bug.h
new file mode 100644
index 000000000000..0d30a67d87a3
--- /dev/null
+++ b/include/asm-sparc/bug.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC_BUG_H
+#define _SPARC_BUG_H
+
+/* Only use the inline asm until a gcc release that can handle __builtin_trap
+ * -rob 2003-06-25
+ *
+ * gcc-3.3.1 and later will be OK -DaveM
+ */
+#if (__GNUC__ > 3) || \
+ (__GNUC__ == 3 && __GNUC_MINOR__ > 3) || \
+ (__GNUC__ == 3 && __GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ >= 4)
+#define __bug_trap() __builtin_trap()
+#else
+#define __bug_trap() \
+ __asm__ __volatile__ ("t 0x5\n\t" : : )
+#endif
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+extern void do_BUG(const char *file, int line);
+#define BUG() do { \
+ do_BUG(__FILE__, __LINE__); \
+ __bug_trap(); \
+} while (0)
+#else
+#define BUG() __bug_trap()
+#endif
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-sparc/bugs.h b/include/asm-sparc/bugs.h
new file mode 100644
index 000000000000..e652f89e0eff
--- /dev/null
+++ b/include/asm-sparc/bugs.h
@@ -0,0 +1,17 @@
+/* $Id: bugs.h,v 1.1 1996/12/26 13:25:20 davem Exp $
+ * include/asm-sparc/bugs.h: Sparc probes for various bugs.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <asm/cpudata.h>
+#include <linux/config.h>
+
+extern unsigned long loops_per_jiffy;
+
+static void check_bugs(void)
+{
+#ifndef CONFIG_SMP
+ cpu_data(0).udelay_val = loops_per_jiffy;
+#endif
+}
diff --git a/include/asm-sparc/byteorder.h b/include/asm-sparc/byteorder.h
new file mode 100644
index 000000000000..a2949aea48ef
--- /dev/null
+++ b/include/asm-sparc/byteorder.h
@@ -0,0 +1,14 @@
+/* $Id: byteorder.h,v 1.15 1997/12/16 19:20:44 davem Exp $ */
+#ifndef _SPARC_BYTEORDER_H
+#define _SPARC_BYTEORDER_H
+
+#include <asm/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _SPARC_BYTEORDER_H */
diff --git a/include/asm-sparc/cache.h b/include/asm-sparc/cache.h
new file mode 100644
index 000000000000..e6316fd7e1a4
--- /dev/null
+++ b/include/asm-sparc/cache.h
@@ -0,0 +1,130 @@
+/* $Id: cache.h,v 1.9 1999/08/14 03:51:58 anton Exp $
+ * cache.h: Cache specific code for the Sparc. These include flushing
+ * and direct tag/data line access.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_CACHE_H
+#define _SPARC_CACHE_H
+
+#include <asm/asi.h>
+
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_BYTES 32
+#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
+#define L1_CACHE_SHIFT_MAX 5 /* largest L1 which this arch supports */
+
+#define SMP_CACHE_BYTES 32
+
+/* Direct access to the instruction cache is provided through and
+ * alternate address space. The IDC bit must be off in the ICCR on
+ * HyperSparcs for these accesses to work. The code below does not do
+ * any checking, the caller must do so. These routines are for
+ * diagnostics only, but could end up being useful. Use with care.
+ * Also, you are asking for trouble if you execute these in one of the
+ * three instructions following a %asr/%psr access or modification.
+ */
+
+/* First, cache-tag access. */
+extern __inline__ unsigned int get_icache_tag(int setnum, int tagnum)
+{
+ unsigned int vaddr, retval;
+
+ vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
+ __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+ "=r" (retval) :
+ "r" (vaddr), "i" (ASI_M_TXTC_TAG));
+ return retval;
+}
+
+extern __inline__ void put_icache_tag(int setnum, int tagnum, unsigned int entry)
+{
+ unsigned int vaddr;
+
+ vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
+ __asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+ "r" (entry), "r" (vaddr), "i" (ASI_M_TXTC_TAG) :
+ "memory");
+}
+
+/* Second cache-data access. The data is returned two-32bit quantities
+ * at a time.
+ */
+extern __inline__ void get_icache_data(int setnum, int tagnum, int subblock,
+ unsigned int *data)
+{
+ unsigned int value1, value2, vaddr;
+
+ vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
+ ((subblock&0x3) << 3);
+ __asm__ __volatile__("ldda [%2] %3, %%g2\n\t"
+ "or %%g0, %%g2, %0\n\t"
+ "or %%g0, %%g3, %1\n\t" :
+ "=r" (value1), "=r" (value2) :
+ "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
+ "g2", "g3");
+ data[0] = value1; data[1] = value2;
+}
+
+extern __inline__ void put_icache_data(int setnum, int tagnum, int subblock,
+ unsigned int *data)
+{
+ unsigned int value1, value2, vaddr;
+
+ vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
+ ((subblock&0x3) << 3);
+ value1 = data[0]; value2 = data[1];
+ __asm__ __volatile__("or %%g0, %0, %%g2\n\t"
+ "or %%g0, %1, %%g3\n\t"
+ "stda %%g2, [%2] %3\n\t" : :
+ "r" (value1), "r" (value2),
+ "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
+ "g2", "g3", "memory" /* no joke */);
+}
+
+/* Different types of flushes with the ICACHE. Some of the flushes
+ * affect both the ICACHE and the external cache. Others only clear
+ * the ICACHE entries on the cpu itself. V8's (most) allow
+ * granularity of flushes on the packet (element in line), whole line,
+ * and entire cache (ie. all lines) level. The ICACHE only flushes are
+ * ROSS HyperSparc specific and are in ross.h
+ */
+
+/* Flushes which clear out both the on-chip and external caches */
+extern __inline__ void flush_ei_page(unsigned int addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+ "r" (addr), "i" (ASI_M_FLUSH_PAGE) :
+ "memory");
+}
+
+extern __inline__ void flush_ei_seg(unsigned int addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+ "r" (addr), "i" (ASI_M_FLUSH_SEG) :
+ "memory");
+}
+
+extern __inline__ void flush_ei_region(unsigned int addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+ "r" (addr), "i" (ASI_M_FLUSH_REGION) :
+ "memory");
+}
+
+extern __inline__ void flush_ei_ctx(unsigned int addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+ "r" (addr), "i" (ASI_M_FLUSH_CTX) :
+ "memory");
+}
+
+extern __inline__ void flush_ei_user(unsigned int addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+ "r" (addr), "i" (ASI_M_FLUSH_USER) :
+ "memory");
+}
+
+#endif /* !(_SPARC_CACHE_H) */
diff --git a/include/asm-sparc/cacheflush.h b/include/asm-sparc/cacheflush.h
new file mode 100644
index 000000000000..4901217008c0
--- /dev/null
+++ b/include/asm-sparc/cacheflush.h
@@ -0,0 +1,85 @@
+#ifndef _SPARC_CACHEFLUSH_H
+#define _SPARC_CACHEFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h> /* Common for other includes */
+// #include <linux/kernel.h> from pgalloc.h
+// #include <linux/sched.h> from pgalloc.h
+
+// #include <asm/page.h>
+#include <asm/btfixup.h>
+
+/*
+ * Fine grained cache flushing.
+ */
+#ifdef CONFIG_SMP
+
+BTFIXUPDEF_CALL(void, local_flush_cache_all, void)
+BTFIXUPDEF_CALL(void, local_flush_cache_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, local_flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_cache_page, struct vm_area_struct *, unsigned long)
+
+#define local_flush_cache_all() BTFIXUP_CALL(local_flush_cache_all)()
+#define local_flush_cache_mm(mm) BTFIXUP_CALL(local_flush_cache_mm)(mm)
+#define local_flush_cache_range(vma,start,end) BTFIXUP_CALL(local_flush_cache_range)(vma,start,end)
+#define local_flush_cache_page(vma,addr) BTFIXUP_CALL(local_flush_cache_page)(vma,addr)
+
+BTFIXUPDEF_CALL(void, local_flush_page_to_ram, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_sig_insns, struct mm_struct *, unsigned long)
+
+#define local_flush_page_to_ram(addr) BTFIXUP_CALL(local_flush_page_to_ram)(addr)
+#define local_flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(local_flush_sig_insns)(mm,insn_addr)
+
+extern void smp_flush_cache_all(void);
+extern void smp_flush_cache_mm(struct mm_struct *mm);
+extern void smp_flush_cache_range(struct vm_area_struct *vma,
+ unsigned long start,
+ unsigned long end);
+extern void smp_flush_cache_page(struct vm_area_struct *vma, unsigned long page);
+
+extern void smp_flush_page_to_ram(unsigned long page);
+extern void smp_flush_sig_insns(struct mm_struct *mm, unsigned long insn_addr);
+
+#endif /* CONFIG_SMP */
+
+BTFIXUPDEF_CALL(void, flush_cache_all, void)
+BTFIXUPDEF_CALL(void, flush_cache_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, flush_cache_page, struct vm_area_struct *, unsigned long)
+
+#define flush_cache_all() BTFIXUP_CALL(flush_cache_all)()
+#define flush_cache_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm)
+#define flush_cache_range(vma,start,end) BTFIXUP_CALL(flush_cache_range)(vma,start,end)
+#define flush_cache_page(vma,addr,pfn) BTFIXUP_CALL(flush_cache_page)(vma,addr)
+#define flush_icache_range(start, end) do { } while (0)
+#define flush_icache_page(vma, pg) do { } while (0)
+
+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+ do { \
+ flush_cache_page(vma, vaddr, page_to_pfn(page));\
+ memcpy(dst, src, len); \
+ } while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ do { \
+ flush_cache_page(vma, vaddr, page_to_pfn(page));\
+ memcpy(dst, src, len); \
+ } while (0)
+
+BTFIXUPDEF_CALL(void, __flush_page_to_ram, unsigned long)
+BTFIXUPDEF_CALL(void, flush_sig_insns, struct mm_struct *, unsigned long)
+
+#define __flush_page_to_ram(addr) BTFIXUP_CALL(__flush_page_to_ram)(addr)
+#define flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(flush_sig_insns)(mm,insn_addr)
+
+extern void sparc_flush_page_to_ram(struct page *page);
+
+#define flush_dcache_page(page) sparc_flush_page_to_ram(page)
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+
+#define flush_cache_vmap(start, end) flush_cache_all()
+#define flush_cache_vunmap(start, end) flush_cache_all()
+
+#endif /* _SPARC_CACHEFLUSH_H */
diff --git a/include/asm-sparc/checksum.h b/include/asm-sparc/checksum.h
new file mode 100644
index 000000000000..286158108974
--- /dev/null
+++ b/include/asm-sparc/checksum.h
@@ -0,0 +1,253 @@
+/* $Id: checksum.h,v 1.33 2002/02/01 22:01:05 davem Exp $ */
+#ifndef __SPARC_CHECKSUM_H
+#define __SPARC_CHECKSUM_H
+
+/* checksum.h: IP/UDP/TCP checksum routines on the Sparc.
+ *
+ * Copyright(C) 1995 Linus Torvalds
+ * Copyright(C) 1995 Miguel de Icaza
+ * Copyright(C) 1996 David S. Miller
+ * Copyright(C) 1996 Eddie C. Dost
+ * Copyright(C) 1997 Jakub Jelinek
+ *
+ * derived from:
+ * Alpha checksum c-code
+ * ix86 inline assembly
+ * RFC1071 Computing the Internet Checksum
+ */
+
+#include <linux/in6.h>
+#include <asm/uaccess.h>
+
+/* computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/* the same as csum_partial, but copies from fs:src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern unsigned int __csum_partial_copy_sparc_generic (const unsigned char *, unsigned char *);
+
+static inline unsigned int
+csum_partial_copy_nocheck (const unsigned char *src, unsigned char *dst, int len,
+ unsigned int sum)
+{
+ register unsigned int ret asm("o0") = (unsigned int)src;
+ register char *d asm("o1") = dst;
+ register int l asm("g1") = len;
+
+ __asm__ __volatile__ (
+ "call __csum_partial_copy_sparc_generic\n\t"
+ " mov %6, %%g7\n"
+ : "=&r" (ret), "=&r" (d), "=&r" (l)
+ : "0" (ret), "1" (d), "2" (l), "r" (sum)
+ : "o2", "o3", "o4", "o5", "o7",
+ "g2", "g3", "g4", "g5", "g7",
+ "memory", "cc");
+ return ret;
+}
+
+static inline unsigned int
+csum_partial_copy_from_user(const unsigned char __user *src, unsigned char *dst, int len,
+ unsigned int sum, int *err)
+ {
+ if (!access_ok (VERIFY_READ, src, len)) {
+ *err = -EFAULT;
+ memset (dst, 0, len);
+ return sum;
+ } else {
+ register unsigned long ret asm("o0") = (unsigned long)src;
+ register char *d asm("o1") = dst;
+ register int l asm("g1") = len;
+ register unsigned int s asm("g7") = sum;
+
+ __asm__ __volatile__ (
+ ".section __ex_table,#alloc\n\t"
+ ".align 4\n\t"
+ ".word 1f,2\n\t"
+ ".previous\n"
+ "1:\n\t"
+ "call __csum_partial_copy_sparc_generic\n\t"
+ " st %8, [%%sp + 64]\n"
+ : "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s)
+ : "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err)
+ : "o2", "o3", "o4", "o5", "o7", "g2", "g3", "g4", "g5",
+ "cc", "memory");
+ return ret;
+ }
+ }
+
+static inline unsigned int
+csum_partial_copy_to_user(const unsigned char *src, unsigned char __user *dst, int len,
+ unsigned int sum, int *err)
+{
+ if (!access_ok (VERIFY_WRITE, dst, len)) {
+ *err = -EFAULT;
+ return sum;
+ } else {
+ register unsigned long ret asm("o0") = (unsigned long)src;
+ register char __user *d asm("o1") = dst;
+ register int l asm("g1") = len;
+ register unsigned int s asm("g7") = sum;
+
+ __asm__ __volatile__ (
+ ".section __ex_table,#alloc\n\t"
+ ".align 4\n\t"
+ ".word 1f,1\n\t"
+ ".previous\n"
+ "1:\n\t"
+ "call __csum_partial_copy_sparc_generic\n\t"
+ " st %8, [%%sp + 64]\n"
+ : "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s)
+ : "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err)
+ : "o2", "o3", "o4", "o5", "o7",
+ "g2", "g3", "g4", "g5",
+ "cc", "memory");
+ return ret;
+ }
+}
+
+#define HAVE_CSUM_COPY_USER
+#define csum_and_copy_to_user csum_partial_copy_to_user
+
+/* ihl is always 5 or greater, almost always is 5, and iph is word aligned
+ * the majority of the time.
+ */
+static inline unsigned short ip_fast_csum(const unsigned char *iph,
+ unsigned int ihl)
+{
+ unsigned short sum;
+
+ /* Note: We must read %2 before we touch %0 for the first time,
+ * because GCC can legitimately use the same register for
+ * both operands.
+ */
+ __asm__ __volatile__("sub\t%2, 4, %%g4\n\t"
+ "ld\t[%1 + 0x00], %0\n\t"
+ "ld\t[%1 + 0x04], %%g2\n\t"
+ "ld\t[%1 + 0x08], %%g3\n\t"
+ "addcc\t%%g2, %0, %0\n\t"
+ "addxcc\t%%g3, %0, %0\n\t"
+ "ld\t[%1 + 0x0c], %%g2\n\t"
+ "ld\t[%1 + 0x10], %%g3\n\t"
+ "addxcc\t%%g2, %0, %0\n\t"
+ "addx\t%0, %%g0, %0\n"
+ "1:\taddcc\t%%g3, %0, %0\n\t"
+ "add\t%1, 4, %1\n\t"
+ "addxcc\t%0, %%g0, %0\n\t"
+ "subcc\t%%g4, 1, %%g4\n\t"
+ "be,a\t2f\n\t"
+ "sll\t%0, 16, %%g2\n\t"
+ "b\t1b\n\t"
+ "ld\t[%1 + 0x10], %%g3\n"
+ "2:\taddcc\t%0, %%g2, %%g2\n\t"
+ "srl\t%%g2, 16, %0\n\t"
+ "addx\t%0, %%g0, %0\n\t"
+ "xnor\t%%g0, %0, %0"
+ : "=r" (sum), "=&r" (iph)
+ : "r" (ihl), "1" (iph)
+ : "g2", "g3", "g4", "cc");
+ return sum;
+}
+
+/* Fold a partial checksum without adding pseudo headers. */
+static inline unsigned int csum_fold(unsigned int sum)
+{
+ unsigned int tmp;
+
+ __asm__ __volatile__("addcc\t%0, %1, %1\n\t"
+ "srl\t%1, 16, %1\n\t"
+ "addx\t%1, %%g0, %1\n\t"
+ "xnor\t%%g0, %1, %0"
+ : "=&r" (sum), "=r" (tmp)
+ : "0" (sum), "1" (sum<<16)
+ : "cc");
+ return sum;
+}
+
+static inline unsigned long csum_tcpudp_nofold(unsigned long saddr,
+ unsigned long daddr,
+ unsigned int len,
+ unsigned short proto,
+ unsigned int sum)
+{
+ __asm__ __volatile__("addcc\t%1, %0, %0\n\t"
+ "addxcc\t%2, %0, %0\n\t"
+ "addxcc\t%3, %0, %0\n\t"
+ "addx\t%0, %%g0, %0\n\t"
+ : "=r" (sum), "=r" (saddr)
+ : "r" (daddr), "r" ((proto<<16)+len), "0" (sum),
+ "1" (saddr)
+ : "cc");
+ return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned short int csum_tcpudp_magic(unsigned long saddr,
+ unsigned long daddr,
+ unsigned short len,
+ unsigned short proto,
+ unsigned int sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+
+static inline unsigned short int csum_ipv6_magic(struct in6_addr *saddr,
+ struct in6_addr *daddr,
+ __u32 len,
+ unsigned short proto,
+ unsigned int sum)
+{
+ __asm__ __volatile__ (
+ "addcc %3, %4, %%g4\n\t"
+ "addxcc %5, %%g4, %%g4\n\t"
+ "ld [%2 + 0x0c], %%g2\n\t"
+ "ld [%2 + 0x08], %%g3\n\t"
+ "addxcc %%g2, %%g4, %%g4\n\t"
+ "ld [%2 + 0x04], %%g2\n\t"
+ "addxcc %%g3, %%g4, %%g4\n\t"
+ "ld [%2 + 0x00], %%g3\n\t"
+ "addxcc %%g2, %%g4, %%g4\n\t"
+ "ld [%1 + 0x0c], %%g2\n\t"
+ "addxcc %%g3, %%g4, %%g4\n\t"
+ "ld [%1 + 0x08], %%g3\n\t"
+ "addxcc %%g2, %%g4, %%g4\n\t"
+ "ld [%1 + 0x04], %%g2\n\t"
+ "addxcc %%g3, %%g4, %%g4\n\t"
+ "ld [%1 + 0x00], %%g3\n\t"
+ "addxcc %%g2, %%g4, %%g4\n\t"
+ "addxcc %%g3, %%g4, %0\n\t"
+ "addx 0, %0, %0\n"
+ : "=&r" (sum)
+ : "r" (saddr), "r" (daddr),
+ "r"(htonl(len)), "r"(htonl(proto)), "r"(sum)
+ : "g2", "g3", "g4", "cc");
+
+ return csum_fold(sum);
+}
+
+/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */
+static inline unsigned short ip_compute_csum(unsigned char * buff, int len)
+{
+ return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* !(__SPARC_CHECKSUM_H) */
diff --git a/include/asm-sparc/clock.h b/include/asm-sparc/clock.h
new file mode 100644
index 000000000000..e708e6b50d2b
--- /dev/null
+++ b/include/asm-sparc/clock.h
@@ -0,0 +1,11 @@
+/* $Id: clock.h,v 1.3 1995/11/25 02:31:25 davem Exp $
+ * clock.h: Definitions for clock operations on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_CLOCK_H
+#define _SPARC_CLOCK_H
+
+/* Foo for now. */
+
+#endif /* !(_SPARC_CLOCK_H) */
diff --git a/include/asm-sparc/contregs.h b/include/asm-sparc/contregs.h
new file mode 100644
index 000000000000..0e05afe02d44
--- /dev/null
+++ b/include/asm-sparc/contregs.h
@@ -0,0 +1,54 @@
+/* $Id: contregs.h,v 1.8 2000/12/28 22:49:11 davem Exp $ */
+#ifndef _SPARC_CONTREGS_H
+#define _SPARC_CONTREGS_H
+
+/* contregs.h: Addresses of registers in the ASI_CONTROL alternate address
+ * space. These are for the mmu's context register, etc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* 3=sun3
+ 4=sun4 (as in sun4 sysmaint student book)
+ c=sun4c (according to davem) */
+
+#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */
+#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */
+#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */
+#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */
+#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/
+#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */
+#define AC_BUS_ERROR 0x60000000 /* 34 Not cleared on read, byte. */
+#define AC_SYNC_ERR 0x60000000 /* c fault type */
+#define AC_SYNC_VA 0x60000004 /* c fault virtual address */
+#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */
+#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */
+#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */
+#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */
+#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */
+#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */
+#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */
+#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/
+
+/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress */
+#define AC_M_PCR 0x0000 /* shv Processor Control Reg */
+#define AC_M_CTPR 0x0100 /* shv Context Table Pointer Reg */
+#define AC_M_CXR 0x0200 /* shv Context Register */
+#define AC_M_SFSR 0x0300 /* shv Synchronous Fault Status Reg */
+#define AC_M_SFAR 0x0400 /* shv Synchronous Fault Address Reg */
+#define AC_M_AFSR 0x0500 /* hv Asynchronous Fault Status Reg */
+#define AC_M_AFAR 0x0600 /* hv Asynchronous Fault Address Reg */
+#define AC_M_RESET 0x0700 /* hv Reset Reg */
+#define AC_M_RPR 0x1000 /* hv Root Pointer Reg */
+#define AC_M_TSUTRCR 0x1000 /* s TLB Replacement Ctrl Reg */
+#define AC_M_IAPTP 0x1100 /* hv Instruction Access PTP */
+#define AC_M_DAPTP 0x1200 /* hv Data Access PTP */
+#define AC_M_ITR 0x1300 /* hv Index Tag Register */
+#define AC_M_TRCR 0x1400 /* hv TLB Replacement Control Reg */
+#define AC_M_SFSRX 0x1300 /* s Synch Fault Status Reg prim */
+#define AC_M_SFARX 0x1400 /* s Synch Fault Address Reg prim */
+#define AC_M_RPR1 0x1500 /* h Root Pointer Reg (entry 2) */
+#define AC_M_IAPTP1 0x1600 /* h Instruction Access PTP (entry 2) */
+#define AC_M_DAPTP1 0x1700 /* h Data Access PTP (entry 2) */
+
+#endif /* _SPARC_CONTREGS_H */
diff --git a/include/asm-sparc/cpudata.h b/include/asm-sparc/cpudata.h
new file mode 100644
index 000000000000..ec0d9ef90a3b
--- /dev/null
+++ b/include/asm-sparc/cpudata.h
@@ -0,0 +1,26 @@
+/* cpudata.h: Per-cpu parameters.
+ *
+ * Copyright (C) 2004 Keith M Wesolowski (wesolows@foobazco.org)
+ *
+ * Based on include/asm-sparc64/cpudata.h and Linux 2.4 smp.h
+ * both (C) David S. Miller.
+ */
+
+#ifndef _SPARC_CPUDATA_H
+#define _SPARC_CPUDATA_H
+
+#include <linux/percpu.h>
+
+typedef struct {
+ unsigned long udelay_val;
+ unsigned long clock_tick;
+ unsigned int multiplier;
+ unsigned int counter;
+ int prom_node;
+ int mid;
+} cpuinfo_sparc;
+
+DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
+#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu))
+
+#endif /* _SPARC_CPUDATA_H */
diff --git a/include/asm-sparc/cputime.h b/include/asm-sparc/cputime.h
new file mode 100644
index 000000000000..1a642b81e019
--- /dev/null
+++ b/include/asm-sparc/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __SPARC_CPUTIME_H
+#define __SPARC_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __SPARC_CPUTIME_H */
diff --git a/include/asm-sparc/current.h b/include/asm-sparc/current.h
new file mode 100644
index 000000000000..8fe7c82a5e21
--- /dev/null
+++ b/include/asm-sparc/current.h
@@ -0,0 +1,31 @@
+/*
+ * include/asm-sparc/current.h
+ *
+ * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) 2002 Pete Zaitcev (zaitcev@yahoo.com)
+ *
+ * Derived from "include/asm-s390/current.h" by
+ * Martin Schwidefsky (schwidefsky@de.ibm.com)
+ * Derived from "include/asm-i386/current.h"
+ */
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+/*
+ * At the sparc64 DaveM keeps current_thread_info in %g4.
+ * We might want to consider doing the same to shave a few cycles.
+ */
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+/* Two stage process (inline + #define) for type-checking. */
+/* We also obfuscate get_current() to check if anyone used that by mistake. */
+static inline struct task_struct *__get_current(void)
+{
+ return current_thread_info()->task;
+}
+#define current __get_current()
+
+#endif /* !(_ASM_CURRENT_H) */
diff --git a/include/asm-sparc/cypress.h b/include/asm-sparc/cypress.h
new file mode 100644
index 000000000000..fc92fc839c3f
--- /dev/null
+++ b/include/asm-sparc/cypress.h
@@ -0,0 +1,79 @@
+/* $Id: cypress.h,v 1.6 1996/08/29 09:48:09 davem Exp $
+ * cypress.h: Cypress module specific definitions and defines.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_CYPRESS_H
+#define _SPARC_CYPRESS_H
+
+/* Cypress chips have %psr 'impl' of '0001' and 'vers' of '0001'. */
+
+/* The MMU control register fields on the Sparc Cypress 604/605 MMU's.
+ *
+ * ---------------------------------------------------------------
+ * |implvers| MCA | MCM |MV| MID |BM| C|RSV|MR|CM|CL|CE|RSV|NF|ME|
+ * ---------------------------------------------------------------
+ * 31 24 23-22 21-20 19 18-15 14 13 12 11 10 9 8 7-2 1 0
+ *
+ * MCA: MultiChip Access -- Used for configuration of multiple
+ * CY7C604/605 cache units.
+ * MCM: MultiChip Mask -- Again, for multiple cache unit config.
+ * MV: MultiChip Valid -- Indicates MCM and MCA have valid settings.
+ * MID: ModuleID -- Unique processor ID for MBus transactions. (605 only)
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ * C: Cacheable -- Indicates whether accesses are cacheable while
+ * the MMU is off. 0=no 1=yes
+ * MR: MemoryReflection -- Indicates whether the bus attached to the
+ * MBus supports memory reflection. 0=no 1=yes (605 only)
+ * CM: CacheMode -- Indicates whether the cache is operating in write
+ * through or copy-back mode. 0=write-through 1=copy-back
+ * CL: CacheLock -- Indicates if the entire cache is locked or not.
+ * 0=not-locked 1=locked (604 only)
+ * CE: CacheEnable -- Is the virtual cache on? 0=no 1=yes
+ * NF: NoFault -- Do faults generate traps? 0=yes 1=no
+ * ME: MmuEnable -- Is the MMU doing translations? 0=no 1=yes
+ */
+
+#define CYPRESS_MCA 0x00c00000
+#define CYPRESS_MCM 0x00300000
+#define CYPRESS_MVALID 0x00080000
+#define CYPRESS_MIDMASK 0x00078000 /* Only on 605 */
+#define CYPRESS_BMODE 0x00004000
+#define CYPRESS_ACENABLE 0x00002000
+#define CYPRESS_MRFLCT 0x00000800 /* Only on 605 */
+#define CYPRESS_CMODE 0x00000400
+#define CYPRESS_CLOCK 0x00000200 /* Only on 604 */
+#define CYPRESS_CENABLE 0x00000100
+#define CYPRESS_NFAULT 0x00000002
+#define CYPRESS_MENABLE 0x00000001
+
+extern __inline__ void cypress_flush_page(unsigned long page)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+ "r" (page), "i" (ASI_M_FLUSH_PAGE));
+}
+
+extern __inline__ void cypress_flush_segment(unsigned long addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+ "r" (addr), "i" (ASI_M_FLUSH_SEG));
+}
+
+extern __inline__ void cypress_flush_region(unsigned long addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+ "r" (addr), "i" (ASI_M_FLUSH_REGION));
+}
+
+extern __inline__ void cypress_flush_context(void)
+{
+ __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : :
+ "i" (ASI_M_FLUSH_CTX));
+}
+
+/* XXX Displacement flushes for buggy chips and initial testing
+ * XXX go here.
+ */
+
+#endif /* !(_SPARC_CYPRESS_H) */
diff --git a/include/asm-sparc/delay.h b/include/asm-sparc/delay.h
new file mode 100644
index 000000000000..6edf2cbb246b
--- /dev/null
+++ b/include/asm-sparc/delay.h
@@ -0,0 +1,35 @@
+/* $Id: delay.h,v 1.11 2001/01/01 01:46:15 davem Exp $
+ * delay.h: Linux delay routines on the Sparc.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu).
+ */
+
+#ifndef __SPARC_DELAY_H
+#define __SPARC_DELAY_H
+
+#include <linux/config.h>
+#include <asm/cpudata.h>
+
+extern __inline__ void __delay(unsigned long loops)
+{
+ __asm__ __volatile__("cmp %0, 0\n\t"
+ "1: bne 1b\n\t"
+ "subcc %0, 1, %0\n" :
+ "=&r" (loops) :
+ "0" (loops) :
+ "cc");
+}
+
+/* This is too messy with inline asm on the Sparc. */
+extern void __udelay(unsigned long usecs, unsigned long lpj);
+extern void __ndelay(unsigned long nsecs, unsigned long lpj);
+
+#ifdef CONFIG_SMP
+#define __udelay_val cpu_data(smp_processor_id()).udelay_val
+#else /* SMP */
+#define __udelay_val loops_per_jiffy
+#endif /* SMP */
+#define udelay(__usecs) __udelay(__usecs, __udelay_val)
+#define ndelay(__nsecs) __ndelay(__nsecs, __udelay_val)
+
+#endif /* defined(__SPARC_DELAY_H) */
diff --git a/include/asm-sparc/div64.h b/include/asm-sparc/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-sparc/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-sparc/dma-mapping.h b/include/asm-sparc/dma-mapping.h
new file mode 100644
index 000000000000..2dc5bb8effa6
--- /dev/null
+++ b/include/asm-sparc/dma-mapping.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_SPARC_DMA_MAPPING_H
+#define _ASM_SPARC_DMA_MAPPING_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#else
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, int flag)
+{
+ BUG();
+ return NULL;
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle)
+{
+ BUG();
+}
+
+#endif /* PCI */
+
+#endif /* _ASM_SPARC_DMA_MAPPING_H */
diff --git a/include/asm-sparc/dma.h b/include/asm-sparc/dma.h
new file mode 100644
index 000000000000..07e6368a2521
--- /dev/null
+++ b/include/asm-sparc/dma.h
@@ -0,0 +1,290 @@
+/* $Id: dma.h,v 1.35 1999/12/27 06:37:09 anton Exp $
+ * include/asm-sparc/dma.h
+ *
+ * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _ASM_SPARC_DMA_H
+#define _ASM_SPARC_DMA_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/vac-ops.h> /* for invalidate's, etc. */
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+
+struct page;
+extern spinlock_t dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dma_spin_lock, flags);
+ return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define MAX_DMA_ADDRESS (~0UL)
+#define DMA_MODE_READ 1
+#define DMA_MODE_WRITE 2
+
+/* Useful constants */
+#define SIZE_16MB (16*1024*1024)
+#define SIZE_64K (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */
+#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */
+#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */
+#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+ dvmarev0,
+ dvmaesc1,
+ dvmarev1,
+ dvmarev2,
+ dvmarev3,
+ dvmarevplus,
+ dvmahme
+};
+
+#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+ struct sbus_dma *next;
+ struct sbus_dev *sdev;
+ void __iomem *regs;
+
+ /* Status, misc info */
+ int node; /* Prom node for this DMA device */
+ int running; /* Are we doing DMA now? */
+ int allocated; /* Are we "owned" by anyone yet? */
+
+ /* Transfer information. */
+ unsigned long addr; /* Start address of current transfer */
+ int nbytes; /* Size of current transfer */
+ int realbytes; /* For splitting up large transfers, etc. */
+
+ /* DMA revision */
+ enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#ifdef CONFIG_SUN4
+/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
+ * Or is rev0 present only on sun4 boxes? -jj */
+#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1)
+#else
+#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1)
+#endif
+#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
+#define DMA_VERS0 0x00000000 /* Sunray DMA version */
+#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
+#define DMA_VERS1 0x80000000 /* DMA rev 1 */
+#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
+#define DMA_VERHME 0xb0000000 /* DMA hme gate array */
+#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
+#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
+#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
+#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
+#define DMA_RST_BPP DMA_RST_SCSI /* Reset the BPP controller */
+#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
+#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
+#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
+#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
+#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32 0x00040000 /* SCSI/BPP: 32byte bursts */
+#define DMA_BRST16 0x00000000 /* SCSI/BPP: 16byte bursts */
+#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
+#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
+#define DMA_BPP_ON DMA_SCSI_ON /* Enable BPP dma */
+#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */
+#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1 0x01
+#define DMA_BURST2 0x02
+#define DMA_BURST4 0x04
+#define DMA_BURST8 0x08
+#define DMA_BURST16 0x10
+#define DMA_BURST32 0x20
+#define DMA_BURST64 0x40
+#define DMA_BURSTBITS 0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
+#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE))
+#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE)))
+#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
+#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
+#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
+#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr))
+#define DMA_BEGINDMA_W(regs) \
+ ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
+#define DMA_BEGINDMA_R(regs) \
+ ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done. So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler. You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+ if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+ } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+ if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+ } while(0)
+
+#if 0 /* P3 this stuff is inline in ledma.c:init_restart_ledma() */
+/* Pause until counter runs out or BIT isn't set in the DMA condition
+ * register.
+ */
+extern __inline__ void sparc_dma_pause(struct sparc_dma_registers *regs,
+ unsigned long bit)
+{
+ int ctr = 50000; /* Let's find some bugs ;) */
+
+ /* Busy wait until the bit is not set any more */
+ while((regs->cond_reg&bit) && (ctr>0)) {
+ ctr--;
+ __delay(5);
+ }
+
+ /* Check for bogus outcome. */
+ if(!ctr)
+ panic("DMA timeout");
+}
+
+/* Reset the friggin' thing... */
+#define DMA_RESET(dma) do { \
+ struct sparc_dma_registers *regs = dma->regs; \
+ /* Let the current FIFO drain itself */ \
+ sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \
+ /* Reset the logic */ \
+ regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \
+ __delay(400); /* let the bits set ;) */ \
+ regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \
+ sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \
+ /* Enable FAST transfers if available */ \
+ if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \
+ dma->running = 0; \
+} while(0)
+#endif
+
+#define for_each_dvma(dma) \
+ for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+extern int get_dma_list(char *);
+extern int request_dma(unsigned int, __const__ char *);
+extern void free_dma(unsigned int);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
+/* Routines for data transfer buffers. */
+BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
+BTFIXUPDEF_CALL(void, mmu_unlockarea, char *, unsigned long)
+
+#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
+#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
+
+/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
+BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void, mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void, mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void, mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+
+#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
+#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
+#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
+#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
+
+/*
+ * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
+ *
+ * The mmu_map_dma_area establishes two mappings in one go.
+ * These mappings point to pages normally mapped at 'va' (linear address).
+ * First mapping is for CPU visible address at 'a', uncached.
+ * This is an alias, but it works because it is an uncached mapping.
+ * Second mapping is for device visible address, or "bus" address.
+ * The bus address is returned at '*pba'.
+ *
+ * These functions seem distinct, but are hard to split. On sun4c,
+ * at least for now, 'a' is equal to bus address, and retured in *pba.
+ * On sun4m, page attributes depend on the CPU type, so we have to
+ * know if we are mapping RAM or I/O, so it has to be an additional argument
+ * to a separate mapping function for CPU visible mappings.
+ */
+BTFIXUPDEF_CALL(int, mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
+BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
+BTFIXUPDEF_CALL(void, mmu_unmap_dma_area, unsigned long busa, int len)
+
+#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
+#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
+#define mmu_translate_dvma(ba) BTFIXUP_CALL(mmu_translate_dvma)(ba)
+
+#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/include/asm-sparc/ebus.h b/include/asm-sparc/ebus.h
new file mode 100644
index 000000000000..2d6a997c5b0c
--- /dev/null
+++ b/include/asm-sparc/ebus.h
@@ -0,0 +1,98 @@
+/* $Id: ebus.h,v 1.2 1999/09/11 23:05:55 zaitcev Exp $
+ * ebus.h: PCI to Ebus pseudo driver software state.
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ *
+ * Adopted for sparc by V. Roganov and G. Raiko.
+ */
+
+#ifndef __SPARC_EBUS_H
+#define __SPARC_EBUS_H
+
+#ifndef _LINUX_IOPORT_H
+#include <linux/ioport.h>
+#endif
+#include <asm/oplib.h>
+
+struct linux_ebus_child {
+ struct linux_ebus_child *next;
+ struct linux_ebus_device *parent;
+ struct linux_ebus *bus;
+ int prom_node;
+ char prom_name[64];
+ struct resource resource[PROMREG_MAX];
+ int num_addrs;
+ unsigned int irqs[PROMINTR_MAX];
+ int num_irqs;
+};
+
+struct linux_ebus_device {
+ struct linux_ebus_device *next;
+ struct linux_ebus_child *children;
+ struct linux_ebus *bus;
+ int prom_node;
+ char prom_name[64];
+ struct resource resource[PROMREG_MAX];
+ int num_addrs;
+ unsigned int irqs[PROMINTR_MAX];
+ int num_irqs;
+};
+
+struct linux_ebus {
+ struct linux_ebus *next;
+ struct linux_ebus_device *devices;
+ struct linux_pbm_info *parent;
+ struct pci_dev *self;
+ int prom_node;
+ char prom_name[64];
+ struct linux_prom_ebus_ranges ebus_ranges[PROMREG_MAX];
+ int num_ebus_ranges;
+};
+
+struct linux_ebus_dma {
+ unsigned int dcsr;
+ unsigned int dacr;
+ unsigned int dbcr;
+};
+
+#define EBUS_DCSR_INT_PEND 0x00000001
+#define EBUS_DCSR_ERR_PEND 0x00000002
+#define EBUS_DCSR_DRAIN 0x00000004
+#define EBUS_DCSR_INT_EN 0x00000010
+#define EBUS_DCSR_RESET 0x00000080
+#define EBUS_DCSR_WRITE 0x00000100
+#define EBUS_DCSR_EN_DMA 0x00000200
+#define EBUS_DCSR_CYC_PEND 0x00000400
+#define EBUS_DCSR_DIAG_RD_DONE 0x00000800
+#define EBUS_DCSR_DIAG_WR_DONE 0x00001000
+#define EBUS_DCSR_EN_CNT 0x00002000
+#define EBUS_DCSR_TC 0x00004000
+#define EBUS_DCSR_DIS_CSR_DRN 0x00010000
+#define EBUS_DCSR_BURST_SZ_MASK 0x000c0000
+#define EBUS_DCSR_BURST_SZ_1 0x00080000
+#define EBUS_DCSR_BURST_SZ_4 0x00000000
+#define EBUS_DCSR_BURST_SZ_8 0x00040000
+#define EBUS_DCSR_BURST_SZ_16 0x000c0000
+#define EBUS_DCSR_DIAG_EN 0x00100000
+#define EBUS_DCSR_DIS_ERR_PEND 0x00400000
+#define EBUS_DCSR_TCI_DIS 0x00800000
+#define EBUS_DCSR_EN_NEXT 0x01000000
+#define EBUS_DCSR_DMA_ON 0x02000000
+#define EBUS_DCSR_A_LOADED 0x04000000
+#define EBUS_DCSR_NA_LOADED 0x08000000
+#define EBUS_DCSR_DEV_ID_MASK 0xf0000000
+
+extern struct linux_ebus *ebus_chain;
+
+extern void ebus_init(void);
+
+#define for_each_ebus(bus) \
+ for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
+
+#define for_each_ebusdev(dev, bus) \
+ for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
+
+#define for_each_edevchild(dev, child) \
+ for((child) = (dev)->children; (child); (child) = (child)->next)
+
+#endif /* !(__SPARC_EBUS_H) */
diff --git a/include/asm-sparc/ecc.h b/include/asm-sparc/ecc.h
new file mode 100644
index 000000000000..8e27ceccb76d
--- /dev/null
+++ b/include/asm-sparc/ecc.h
@@ -0,0 +1,122 @@
+/* $Id: ecc.h,v 1.3 1996/04/25 06:12:57 davem Exp $
+ * ecc.h: Definitions and defines for the external cache/memory
+ * controller on the sun4m.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_ECC_H
+#define _SPARC_ECC_H
+
+/* These registers are accessed through the SRMMU passthrough ASI 0x20 */
+#define ECC_ENABLE 0x00000000 /* ECC enable register */
+#define ECC_FSTATUS 0x00000008 /* ECC fault status register */
+#define ECC_FADDR 0x00000010 /* ECC fault address register */
+#define ECC_DIGNOSTIC 0x00000018 /* ECC diagnostics register */
+#define ECC_MBAENAB 0x00000020 /* MBus arbiter enable register */
+#define ECC_DMESG 0x00001000 /* Diagnostic message passing area */
+
+/* ECC MBus Arbiter Enable register:
+ *
+ * ----------------------------------------
+ * | |SBUS|MOD3|MOD2|MOD1|RSV|
+ * ----------------------------------------
+ * 31 5 4 3 2 1 0
+ *
+ * SBUS: Enable MBus Arbiter on the SBus 0=off 1=on
+ * MOD3: Enable MBus Arbiter on MBus module 3 0=off 1=on
+ * MOD2: Enable MBus Arbiter on MBus module 2 0=off 1=on
+ * MOD1: Enable MBus Arbiter on MBus module 1 0=off 1=on
+ */
+
+#define ECC_MBAE_SBUS 0x00000010
+#define ECC_MBAE_MOD3 0x00000008
+#define ECC_MBAE_MOD2 0x00000004
+#define ECC_MBAE_MOD1 0x00000002
+
+/* ECC Fault Control Register layout:
+ *
+ * -----------------------------
+ * | RESV | ECHECK | EINT |
+ * -----------------------------
+ * 31 2 1 0
+ *
+ * ECHECK: Enable ECC checking. 0=off 1=on
+ * EINT: Enable Interrupts for correctable errors. 0=off 1=on
+ */
+#define ECC_FCR_CHECK 0x00000002
+#define ECC_FCR_INTENAB 0x00000001
+
+/* ECC Fault Address Register Zero layout:
+ *
+ * -----------------------------------------------------
+ * | MID | S | RSV | VA | BM |AT| C| SZ |TYP| PADDR |
+ * -----------------------------------------------------
+ * 31-28 27 26-22 21-14 13 12 11 10-8 7-4 3-0
+ *
+ * MID: ModuleID of the faulting processor. ie. who did it?
+ * S: Supervisor/Privileged access? 0=no 1=yes
+ * VA: Bits 19-12 of the virtual faulting address, these are the
+ * superset bits in the virtual cache and can be used for
+ * a flush operation if necessary.
+ * BM: Boot mode? 0=no 1=yes This is just like the SRMMU boot
+ * mode bit.
+ * AT: Did this fault happen during an atomic instruction? 0=no
+ * 1=yes. This means either an 'ldstub' or 'swap' instruction
+ * was in progress (but not finished) when this fault happened.
+ * This indicated whether the bus was locked when the fault
+ * occurred.
+ * C: Did the pte for this access indicate that it was cacheable?
+ * 0=no 1=yes
+ * SZ: The size of the transaction.
+ * TYP: The transaction type.
+ * PADDR: Bits 35-32 of the physical address for the fault.
+ */
+#define ECC_FADDR0_MIDMASK 0xf0000000
+#define ECC_FADDR0_S 0x08000000
+#define ECC_FADDR0_VADDR 0x003fc000
+#define ECC_FADDR0_BMODE 0x00002000
+#define ECC_FADDR0_ATOMIC 0x00001000
+#define ECC_FADDR0_CACHE 0x00000800
+#define ECC_FADDR0_SIZE 0x00000700
+#define ECC_FADDR0_TYPE 0x000000f0
+#define ECC_FADDR0_PADDR 0x0000000f
+
+/* ECC Fault Address Register One layout:
+ *
+ * -------------------------------------
+ * | Physical Address 31-0 |
+ * -------------------------------------
+ * 31 0
+ *
+ * You get the upper 4 bits of the physical address from the
+ * PADDR field in ECC Fault Address Zero register.
+ */
+
+/* ECC Fault Status Register layout:
+ *
+ * ----------------------------------------------
+ * | RESV|C2E|MULT|SYNDROME|DWORD|UNC|TIMEO|BS|C|
+ * ----------------------------------------------
+ * 31-18 17 16 15-8 7-4 3 2 1 0
+ *
+ * C2E: A C2 graphics error occurred. 0=no 1=yes (SS10 only)
+ * MULT: Multiple errors occurred ;-O 0=no 1=prom_panic(yes)
+ * SYNDROME: Controller is mentally unstable.
+ * DWORD:
+ * UNC: Uncorrectable error. 0=no 1=yes
+ * TIMEO: Timeout occurred. 0=no 1=yes
+ * BS: C2 graphics bad slot access. 0=no 1=yes (SS10 only)
+ * C: Correctable error? 0=no 1=yes
+ */
+
+#define ECC_FSR_C2ERR 0x00020000
+#define ECC_FSR_MULT 0x00010000
+#define ECC_FSR_SYND 0x0000ff00
+#define ECC_FSR_DWORD 0x000000f0
+#define ECC_FSR_UNC 0x00000008
+#define ECC_FSR_TIMEO 0x00000004
+#define ECC_FSR_BADSLOT 0x00000002
+#define ECC_FSR_C 0x00000001
+
+#endif /* !(_SPARC_ECC_H) */
diff --git a/include/asm-sparc/eeprom.h b/include/asm-sparc/eeprom.h
new file mode 100644
index 000000000000..a8ff7496ddf5
--- /dev/null
+++ b/include/asm-sparc/eeprom.h
@@ -0,0 +1,9 @@
+/* $Id: eeprom.h,v 1.3 1995/11/25 02:31:38 davem Exp $
+ * eeprom.h: Definitions for the Sun eeprom.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* The EEPROM and the Mostek Mk48t02 use the same IO address space
+ * for their registers/data areas. The IDPROM lives here too.
+ */
diff --git a/include/asm-sparc/elf.h b/include/asm-sparc/elf.h
new file mode 100644
index 000000000000..4a71d7c1eace
--- /dev/null
+++ b/include/asm-sparc/elf.h
@@ -0,0 +1,173 @@
+/* $Id: elf.h,v 1.22 2000/07/12 01:27:08 davem Exp $ */
+#ifndef __ASMSPARC_ELF_H
+#define __ASMSPARC_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <linux/config.h>
+#include <asm/ptrace.h>
+
+#ifdef __KERNEL__
+#include <asm/mbus.h>
+#include <asm/uaccess.h>
+#endif
+
+/*
+ * Sparc section types
+ */
+#define STT_REGISTER 13
+
+/*
+ * Sparc ELF relocation types
+ */
+#define R_SPARC_NONE 0
+#define R_SPARC_8 1
+#define R_SPARC_16 2
+#define R_SPARC_32 3
+#define R_SPARC_DISP8 4
+#define R_SPARC_DISP16 5
+#define R_SPARC_DISP32 6
+#define R_SPARC_WDISP30 7
+#define R_SPARC_WDISP22 8
+#define R_SPARC_HI22 9
+#define R_SPARC_22 10
+#define R_SPARC_13 11
+#define R_SPARC_LO10 12
+#define R_SPARC_GOT10 13
+#define R_SPARC_GOT13 14
+#define R_SPARC_GOT22 15
+#define R_SPARC_PC10 16
+#define R_SPARC_PC22 17
+#define R_SPARC_WPLT30 18
+#define R_SPARC_COPY 19
+#define R_SPARC_GLOB_DAT 20
+#define R_SPARC_JMP_SLOT 21
+#define R_SPARC_RELATIVE 22
+#define R_SPARC_UA32 23
+#define R_SPARC_PLT32 24
+#define R_SPARC_HIPLT22 25
+#define R_SPARC_LOPLT10 26
+#define R_SPARC_PCPLT32 27
+#define R_SPARC_PCPLT22 28
+#define R_SPARC_PCPLT10 29
+#define R_SPARC_10 30
+#define R_SPARC_11 31
+#define R_SPARC_64 32
+#define R_SPARC_OLO10 33
+#define R_SPARC_WDISP16 40
+#define R_SPARC_WDISP19 41
+#define R_SPARC_7 43
+#define R_SPARC_5 44
+#define R_SPARC_6 45
+
+/* Bits present in AT_HWCAP, primarily for Sparc32. */
+
+#define HWCAP_SPARC_FLUSH 1 /* CPU supports flush instruction. */
+#define HWCAP_SPARC_STBAR 2
+#define HWCAP_SPARC_SWAP 4
+#define HWCAP_SPARC_MULDIV 8
+#define HWCAP_SPARC_V9 16
+#define HWCAP_SPARC_ULTRA3 32
+
+/* For the most part we present code dumps in the format
+ * Solaris does.
+ */
+typedef unsigned long elf_greg_t;
+#define ELF_NGREG 38
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* Format is:
+ * G0 --> G7
+ * O0 --> O7
+ * L0 --> L7
+ * I0 --> I7
+ * PSR, PC, nPC, Y, WIM, TBR
+ */
+#define ELF_CORE_COPY_REGS(__elf_regs, __pt_regs) \
+do { unsigned long *dest = &(__elf_regs[0]); \
+ struct pt_regs *src = (__pt_regs); \
+ unsigned long __user *sp; \
+ memcpy(&dest[0], &src->u_regs[0], \
+ sizeof(unsigned long) * 16); \
+ /* Don't try this at home kids... */ \
+ sp = (unsigned long __user *) src->u_regs[14]; \
+ copy_from_user(&dest[16], sp, \
+ sizeof(unsigned long) * 16); \
+ dest[32] = src->psr; \
+ dest[33] = src->pc; \
+ dest[34] = src->npc; \
+ dest[35] = src->y; \
+ dest[36] = dest[37] = 0; /* XXX */ \
+} while(0); /* Janitors: Don't touch this colon. */
+
+typedef struct {
+ union {
+ unsigned long pr_regs[32];
+ double pr_dregs[16];
+ } pr_fr;
+ unsigned long __unused;
+ unsigned long pr_fsr;
+ unsigned char pr_qcnt;
+ unsigned char pr_q_entrysize;
+ unsigned char pr_en;
+ unsigned int pr_q[64];
+} elf_fpregset_t;
+
+#define ELF_CORE_COPY_TASK_REGS(__tsk, __elf_regs) \
+ ({ ELF_CORE_COPY_REGS((*(__elf_regs)), (__tsk)->thread.kregs); 1; })
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_SPARC)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH EM_SPARC
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2MSB
+
+#define USE_ELF_CORE_DUMP
+#ifndef CONFIG_SUN4
+#define ELF_EXEC_PAGESIZE 4096
+#else
+#define ELF_EXEC_PAGESIZE 8192
+#endif
+
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE (TASK_UNMAPPED_BASE)
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. This can NOT be done in userspace
+ on Sparc. */
+
+/* Sun4c has none of the capabilities, most sun4m's have them all.
+ * XXX This is gross, set some global variable at boot time. -DaveM
+ */
+#define ELF_HWCAP ((ARCH_SUN4C_SUN4) ? 0 : \
+ (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \
+ HWCAP_SPARC_SWAP | \
+ ((srmmu_modtype != Cypress && \
+ srmmu_modtype != Cypress_vE && \
+ srmmu_modtype != Cypress_vD) ? \
+ HWCAP_SPARC_MULDIV : 0)))
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#endif
+
+#endif /* !(__ASMSPARC_ELF_H) */
diff --git a/include/asm-sparc/errno.h b/include/asm-sparc/errno.h
new file mode 100644
index 000000000000..8c01c5f3b06d
--- /dev/null
+++ b/include/asm-sparc/errno.h
@@ -0,0 +1,110 @@
+/* $Id: errno.h,v 1.6 1997/04/15 09:03:38 davem Exp $ */
+#ifndef _SPARC_ERRNO_H
+#define _SPARC_ERRNO_H
+
+/* These match the SunOS error numbering scheme. */
+
+#include <asm-generic/errno-base.h>
+
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define EINPROGRESS 36 /* Operation now in progress */
+#define EALREADY 37 /* Operation already in progress */
+#define ENOTSOCK 38 /* Socket operation on non-socket */
+#define EDESTADDRREQ 39 /* Destination address required */
+#define EMSGSIZE 40 /* Message too long */
+#define EPROTOTYPE 41 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 42 /* Protocol not available */
+#define EPROTONOSUPPORT 43 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 44 /* Socket type not supported */
+#define EOPNOTSUPP 45 /* Op not supported on transport endpoint */
+#define EPFNOSUPPORT 46 /* Protocol family not supported */
+#define EAFNOSUPPORT 47 /* Address family not supported by protocol */
+#define EADDRINUSE 48 /* Address already in use */
+#define EADDRNOTAVAIL 49 /* Cannot assign requested address */
+#define ENETDOWN 50 /* Network is down */
+#define ENETUNREACH 51 /* Network is unreachable */
+#define ENETRESET 52 /* Net dropped connection because of reset */
+#define ECONNABORTED 53 /* Software caused connection abort */
+#define ECONNRESET 54 /* Connection reset by peer */
+#define ENOBUFS 55 /* No buffer space available */
+#define EISCONN 56 /* Transport endpoint is already connected */
+#define ENOTCONN 57 /* Transport endpoint is not connected */
+#define ESHUTDOWN 58 /* No send after transport endpoint shutdown */
+#define ETOOMANYREFS 59 /* Too many references: cannot splice */
+#define ETIMEDOUT 60 /* Connection timed out */
+#define ECONNREFUSED 61 /* Connection refused */
+#define ELOOP 62 /* Too many symbolic links encountered */
+#define ENAMETOOLONG 63 /* File name too long */
+#define EHOSTDOWN 64 /* Host is down */
+#define EHOSTUNREACH 65 /* No route to host */
+#define ENOTEMPTY 66 /* Directory not empty */
+#define EPROCLIM 67 /* SUNOS: Too many processes */
+#define EUSERS 68 /* Too many users */
+#define EDQUOT 69 /* Quota exceeded */
+#define ESTALE 70 /* Stale NFS file handle */
+#define EREMOTE 71 /* Object is remote */
+#define ENOSTR 72 /* Device not a stream */
+#define ETIME 73 /* Timer expired */
+#define ENOSR 74 /* Out of streams resources */
+#define ENOMSG 75 /* No message of desired type */
+#define EBADMSG 76 /* Not a data message */
+#define EIDRM 77 /* Identifier removed */
+#define EDEADLK 78 /* Resource deadlock would occur */
+#define ENOLCK 79 /* No record locks available */
+#define ENONET 80 /* Machine is not on the network */
+#define ERREMOTE 81 /* SunOS: Too many lvls of remote in path */
+#define ENOLINK 82 /* Link has been severed */
+#define EADV 83 /* Advertise error */
+#define ESRMNT 84 /* Srmount error */
+#define ECOMM 85 /* Communication error on send */
+#define EPROTO 86 /* Protocol error */
+#define EMULTIHOP 87 /* Multihop attempted */
+#define EDOTDOT 88 /* RFS specific error */
+#define EREMCHG 89 /* Remote address changed */
+#define ENOSYS 90 /* Function not implemented */
+
+/* The rest have no SunOS equivalent. */
+#define ESTRPIPE 91 /* Streams pipe error */
+#define EOVERFLOW 92 /* Value too large for defined data type */
+#define EBADFD 93 /* File descriptor in bad state */
+#define ECHRNG 94 /* Channel number out of range */
+#define EL2NSYNC 95 /* Level 2 not synchronized */
+#define EL3HLT 96 /* Level 3 halted */
+#define EL3RST 97 /* Level 3 reset */
+#define ELNRNG 98 /* Link number out of range */
+#define EUNATCH 99 /* Protocol driver not attached */
+#define ENOCSI 100 /* No CSI structure available */
+#define EL2HLT 101 /* Level 2 halted */
+#define EBADE 102 /* Invalid exchange */
+#define EBADR 103 /* Invalid request descriptor */
+#define EXFULL 104 /* Exchange full */
+#define ENOANO 105 /* No anode */
+#define EBADRQC 106 /* Invalid request code */
+#define EBADSLT 107 /* Invalid slot */
+#define EDEADLOCK 108 /* File locking deadlock error */
+#define EBFONT 109 /* Bad font file format */
+#define ELIBEXEC 110 /* Cannot exec a shared library directly */
+#define ENODATA 111 /* No data available */
+#define ELIBBAD 112 /* Accessing a corrupted shared library */
+#define ENOPKG 113 /* Package not installed */
+#define ELIBACC 114 /* Can not access a needed shared library */
+#define ENOTUNIQ 115 /* Name not unique on network */
+#define ERESTART 116 /* Interrupted syscall should be restarted */
+#define EUCLEAN 117 /* Structure needs cleaning */
+#define ENOTNAM 118 /* Not a XENIX named type file */
+#define ENAVAIL 119 /* No XENIX semaphores available */
+#define EISNAM 120 /* Is a named type file */
+#define EREMOTEIO 121 /* Remote I/O error */
+#define EILSEQ 122 /* Illegal byte sequence */
+#define ELIBMAX 123 /* Atmpt to link in too many shared libs */
+#define ELIBSCN 124 /* .lib section in a.out corrupted */
+
+#define ENOMEDIUM 125 /* No medium found */
+#define EMEDIUMTYPE 126 /* Wrong medium type */
+#define ECANCELED 127 /* Operation Cancelled */
+#define ENOKEY 128 /* Required key not available */
+#define EKEYEXPIRED 129 /* Key has expired */
+#define EKEYREVOKED 130 /* Key has been revoked */
+#define EKEYREJECTED 131 /* Key was rejected by service */
+
+#endif
diff --git a/include/asm-sparc/fbio.h b/include/asm-sparc/fbio.h
new file mode 100644
index 000000000000..c2b27e7a7cad
--- /dev/null
+++ b/include/asm-sparc/fbio.h
@@ -0,0 +1,297 @@
+#ifndef __LINUX_FBIO_H
+#define __LINUX_FBIO_H
+
+/* Constants used for fbio SunOS compatibility */
+/* (C) 1996 Miguel de Icaza */
+
+/* Frame buffer types */
+#define FBTYPE_NOTYPE -1
+#define FBTYPE_SUN1BW 0 /* mono */
+#define FBTYPE_SUN1COLOR 1
+#define FBTYPE_SUN2BW 2
+#define FBTYPE_SUN2COLOR 3
+#define FBTYPE_SUN2GP 4
+#define FBTYPE_SUN5COLOR 5
+#define FBTYPE_SUN3COLOR 6
+#define FBTYPE_MEMCOLOR 7
+#define FBTYPE_SUN4COLOR 8
+
+#define FBTYPE_NOTSUN1 9
+#define FBTYPE_NOTSUN2 10
+#define FBTYPE_NOTSUN3 11
+
+#define FBTYPE_SUNFAST_COLOR 12 /* cg6 */
+#define FBTYPE_SUNROP_COLOR 13
+#define FBTYPE_SUNFB_VIDEO 14
+#define FBTYPE_SUNGIFB 15
+#define FBTYPE_SUNGPLAS 16
+#define FBTYPE_SUNGP3 17
+#define FBTYPE_SUNGT 18
+#define FBTYPE_SUNLEO 19 /* zx Leo card */
+#define FBTYPE_MDICOLOR 20 /* cg14 */
+#define FBTYPE_TCXCOLOR 21 /* SUNW,tcx card */
+
+#define FBTYPE_LASTPLUSONE 21 /* This is not last + 1 in fact... */
+
+/* Does not seem to be listed in the Sun file either */
+#define FBTYPE_CREATOR 22
+#define FBTYPE_PCI_IGA1682 23
+#define FBTYPE_P9100COLOR 24
+
+/* fbio ioctls */
+/* Returned by FBIOGTYPE */
+struct fbtype {
+ int fb_type; /* fb type, see above */
+ int fb_height; /* pixels */
+ int fb_width; /* pixels */
+ int fb_depth;
+ int fb_cmsize; /* color map entries */
+ int fb_size; /* fb size in bytes */
+};
+#define FBIOGTYPE _IOR('F', 0, struct fbtype)
+
+struct fbcmap {
+ int index; /* first element (0 origin) */
+ int count;
+ unsigned char __user *red;
+ unsigned char __user *green;
+ unsigned char __user *blue;
+};
+
+#ifdef __KERNEL__
+#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
+#else
+#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
+#endif
+
+/* # of device specific values */
+#define FB_ATTR_NDEVSPECIFIC 8
+/* # of possible emulations */
+#define FB_ATTR_NEMUTYPES 4
+
+struct fbsattr {
+ int flags;
+ int emu_type; /* -1 if none */
+ int dev_specific[FB_ATTR_NDEVSPECIFIC];
+};
+
+struct fbgattr {
+ int real_type; /* real frame buffer type */
+ int owner; /* unknown */
+ struct fbtype fbtype; /* real frame buffer fbtype */
+ struct fbsattr sattr;
+ int emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
+};
+#define FBIOSATTR _IOW('F', 5, struct fbgattr) /* Unsupported: */
+#define FBIOGATTR _IOR('F', 6, struct fbgattr) /* supported */
+
+#define FBIOSVIDEO _IOW('F', 7, int)
+#define FBIOGVIDEO _IOR('F', 8, int)
+
+struct fbcursor {
+ short set; /* what to set, choose from the list above */
+ short enable; /* cursor on/off */
+ struct fbcurpos pos; /* cursor position */
+ struct fbcurpos hot; /* cursor hot spot */
+ struct fbcmap cmap; /* color map info */
+ struct fbcurpos size; /* cursor bit map size */
+ char *image; /* cursor image bits */
+ char *mask; /* cursor mask bits */
+};
+
+/* set/get cursor attributes/shape */
+#define FBIOSCURSOR _IOW('F', 24, struct fbcursor)
+#define FBIOGCURSOR _IOWR('F', 25, struct fbcursor)
+
+/* set/get cursor position */
+#define FBIOSCURPOS _IOW('F', 26, struct fbcurpos)
+#define FBIOGCURPOS _IOW('F', 27, struct fbcurpos)
+
+/* get max cursor size */
+#define FBIOGCURMAX _IOR('F', 28, struct fbcurpos)
+
+/* wid manipulation */
+struct fb_wid_alloc {
+#define FB_WID_SHARED_8 0
+#define FB_WID_SHARED_24 1
+#define FB_WID_DBL_8 2
+#define FB_WID_DBL_24 3
+ __u32 wa_type;
+ __s32 wa_index; /* Set on return */
+ __u32 wa_count;
+};
+struct fb_wid_item {
+ __u32 wi_type;
+ __s32 wi_index;
+ __u32 wi_attrs;
+ __u32 wi_values[32];
+};
+struct fb_wid_list {
+ __u32 wl_flags;
+ __u32 wl_count;
+ struct fb_wid_item *wl_list;
+};
+
+#define FBIO_WID_ALLOC _IOWR('F', 30, struct fb_wid_alloc)
+#define FBIO_WID_FREE _IOW('F', 31, struct fb_wid_alloc)
+#define FBIO_WID_PUT _IOW('F', 32, struct fb_wid_list)
+#define FBIO_WID_GET _IOWR('F', 33, struct fb_wid_list)
+
+/* Creator ioctls */
+#define FFB_IOCTL ('F'<<8)
+#define FFB_SYS_INFO (FFB_IOCTL|80)
+#define FFB_CLUTREAD (FFB_IOCTL|81)
+#define FFB_CLUTPOST (FFB_IOCTL|82)
+#define FFB_SETDIAGMODE (FFB_IOCTL|83)
+#define FFB_GETMONITORID (FFB_IOCTL|84)
+#define FFB_GETVIDEOMODE (FFB_IOCTL|85)
+#define FFB_SETVIDEOMODE (FFB_IOCTL|86)
+#define FFB_SETSERVER (FFB_IOCTL|87)
+#define FFB_SETOVCTL (FFB_IOCTL|88)
+#define FFB_GETOVCTL (FFB_IOCTL|89)
+#define FFB_GETSAXNUM (FFB_IOCTL|90)
+#define FFB_FBDEBUG (FFB_IOCTL|91)
+
+/* Cg14 ioctls */
+#define MDI_IOCTL ('M'<<8)
+#define MDI_RESET (MDI_IOCTL|1)
+#define MDI_GET_CFGINFO (MDI_IOCTL|2)
+#define MDI_SET_PIXELMODE (MDI_IOCTL|3)
+# define MDI_32_PIX 32
+# define MDI_16_PIX 16
+# define MDI_8_PIX 8
+
+struct mdi_cfginfo {
+ int mdi_ncluts; /* Number of implemented CLUTs in this MDI */
+ int mdi_type; /* FBTYPE name */
+ int mdi_height; /* height */
+ int mdi_width; /* widht */
+ int mdi_size; /* available ram */
+ int mdi_mode; /* 8bpp, 16bpp or 32bpp */
+ int mdi_pixfreq; /* pixel clock (from PROM) */
+};
+
+/* SparcLinux specific ioctl for the MDI, should be replaced for
+ * the SET_XLUT/SET_CLUTn ioctls instead
+ */
+#define MDI_CLEAR_XLUT (MDI_IOCTL|9)
+
+/* leo & ffb ioctls */
+struct fb_clut_alloc {
+ __u32 clutid; /* Set on return */
+ __u32 flag;
+ __u32 index;
+};
+
+struct fb_clut {
+#define FB_CLUT_WAIT 0x00000001 /* Not yet implemented */
+ __u32 flag;
+ __u32 clutid;
+ __u32 offset;
+ __u32 count;
+ char * red;
+ char * green;
+ char * blue;
+};
+
+struct fb_clut32 {
+ __u32 flag;
+ __u32 clutid;
+ __u32 offset;
+ __u32 count;
+ __u32 red;
+ __u32 green;
+ __u32 blue;
+};
+
+#define LEO_CLUTALLOC _IOWR('L', 53, struct fb_clut_alloc)
+#define LEO_CLUTFREE _IOW('L', 54, struct fb_clut_alloc)
+#define LEO_CLUTREAD _IOW('L', 55, struct fb_clut)
+#define LEO_CLUTPOST _IOW('L', 56, struct fb_clut)
+#define LEO_SETGAMMA _IOW('L', 68, int) /* Not yet implemented */
+#define LEO_GETGAMMA _IOR('L', 69, int) /* Not yet implemented */
+
+#ifdef __KERNEL__
+/* Addresses on the fd of a cgsix that are mappable */
+#define CG6_FBC 0x70000000
+#define CG6_TEC 0x70001000
+#define CG6_BTREGS 0x70002000
+#define CG6_FHC 0x70004000
+#define CG6_THC 0x70005000
+#define CG6_ROM 0x70006000
+#define CG6_RAM 0x70016000
+#define CG6_DHC 0x80000000
+
+#define CG3_MMAP_OFFSET 0x4000000
+
+/* Addresses on the fd of a tcx that are mappable */
+#define TCX_RAM8BIT 0x00000000
+#define TCX_RAM24BIT 0x01000000
+#define TCX_UNK3 0x10000000
+#define TCX_UNK4 0x20000000
+#define TCX_CONTROLPLANE 0x28000000
+#define TCX_UNK6 0x30000000
+#define TCX_UNK7 0x38000000
+#define TCX_TEC 0x70000000
+#define TCX_BTREGS 0x70002000
+#define TCX_THC 0x70004000
+#define TCX_DHC 0x70008000
+#define TCX_ALT 0x7000a000
+#define TCX_SYNC 0x7000e000
+#define TCX_UNK2 0x70010000
+
+/* CG14 definitions */
+
+/* Offsets into the OBIO space: */
+#define CG14_REGS 0 /* registers */
+#define CG14_CURSORREGS 0x1000 /* cursor registers */
+#define CG14_DACREGS 0x2000 /* DAC registers */
+#define CG14_XLUT 0x3000 /* X Look Up Table -- ??? */
+#define CG14_CLUT1 0x4000 /* Color Look Up Table */
+#define CG14_CLUT2 0x5000 /* Color Look Up Table */
+#define CG14_CLUT3 0x6000 /* Color Look Up Table */
+#define CG14_AUTO 0xf000
+
+#endif /* KERNEL */
+
+/* These are exported to userland for applications to use */
+/* Mappable offsets for the cg14: control registers */
+#define MDI_DIRECT_MAP 0x10000000
+#define MDI_CTLREG_MAP 0x20000000
+#define MDI_CURSOR_MAP 0x30000000
+#define MDI_SHDW_VRT_MAP 0x40000000
+
+/* Mappable offsets for the cg14: frame buffer resolutions */
+/* 32 bits */
+#define MDI_CHUNKY_XBGR_MAP 0x50000000
+#define MDI_CHUNKY_BGR_MAP 0x60000000
+
+/* 16 bits */
+#define MDI_PLANAR_X16_MAP 0x70000000
+#define MDI_PLANAR_C16_MAP 0x80000000
+
+/* 8 bit is done as CG3 MMAP offset */
+/* 32 bits, planar */
+#define MDI_PLANAR_X32_MAP 0x90000000
+#define MDI_PLANAR_B32_MAP 0xa0000000
+#define MDI_PLANAR_G32_MAP 0xb0000000
+#define MDI_PLANAR_R32_MAP 0xc0000000
+
+/* Mappable offsets on leo */
+#define LEO_SS0_MAP 0x00000000
+#define LEO_LC_SS0_USR_MAP 0x00800000
+#define LEO_LD_SS0_MAP 0x00801000
+#define LEO_LX_CURSOR_MAP 0x00802000
+#define LEO_SS1_MAP 0x00803000
+#define LEO_LC_SS1_USR_MAP 0x01003000
+#define LEO_LD_SS1_MAP 0x01004000
+#define LEO_UNK_MAP 0x01005000
+#define LEO_LX_KRN_MAP 0x01006000
+#define LEO_LC_SS0_KRN_MAP 0x01007000
+#define LEO_LC_SS1_KRN_MAP 0x01008000
+#define LEO_LD_GBL_MAP 0x01009000
+#define LEO_UNK2_MAP 0x0100a000
+
+#endif /* __LINUX_FBIO_H */
diff --git a/include/asm-sparc/fcntl.h b/include/asm-sparc/fcntl.h
new file mode 100644
index 000000000000..df9c75d41d68
--- /dev/null
+++ b/include/asm-sparc/fcntl.h
@@ -0,0 +1,89 @@
+/* $Id: fcntl.h,v 1.16 2001/09/20 00:35:33 davem Exp $ */
+#ifndef _SPARC_FCNTL_H
+#define _SPARC_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+ located on an ext2 file system */
+#define O_RDONLY 0x0000
+#define O_WRONLY 0x0001
+#define O_RDWR 0x0002
+#define O_ACCMODE 0x0003
+#define O_APPEND 0x0008
+#define FASYNC 0x0040 /* fcntl, for BSD compatibility */
+#define O_CREAT 0x0200 /* not fcntl */
+#define O_TRUNC 0x0400 /* not fcntl */
+#define O_EXCL 0x0800 /* not fcntl */
+#define O_SYNC 0x2000
+#define O_NONBLOCK 0x4000
+#define O_NDELAY (0x0004 | O_NONBLOCK)
+#define O_NOCTTY 0x8000 /* not fcntl */
+#define O_DIRECTORY 0x10000 /* must be a directory */
+#define O_NOFOLLOW 0x20000 /* don't follow links */
+#define O_LARGEFILE 0x40000
+#define O_DIRECT 0x100000 /* direct disk access hint */
+#define O_NOATIME 0x200000
+
+#define F_DUPFD 0 /* dup */
+#define F_GETFD 1 /* get close_on_exec */
+#define F_SETFD 2 /* set/clear close_on_exec */
+#define F_GETFL 3 /* get file->f_flags */
+#define F_SETFL 4 /* set file->f_flags */
+#define F_GETOWN 5 /* for sockets. */
+#define F_SETOWN 6 /* for sockets. */
+#define F_GETLK 7
+#define F_SETLK 8
+#define F_SETLKW 9
+#define F_SETSIG 10 /* for sockets. */
+#define F_GETSIG 11 /* for sockets. */
+
+#define F_GETLK64 12 /* using 'struct flock64' */
+#define F_SETLK64 13
+#define F_SETLKW64 14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC 1 /* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK 1
+#define F_WRLCK 2
+#define F_UNLCK 3
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK 4 /* or 3 */
+#define F_SHLCK 8 /* or 4 */
+
+/* for leases */
+#define F_INPROGRESS 16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH 1 /* shared lock */
+#define LOCK_EX 2 /* exclusive lock */
+#define LOCK_NB 4 /* or'd with one of the above to prevent
+ blocking */
+#define LOCK_UN 8 /* remove lock */
+
+#define LOCK_MAND 32 /* This is a mandatory flock */
+#define LOCK_READ 64 /* ... Which allows concurrent read operations */
+#define LOCK_WRITE 128 /* ... Which allows concurrent write operations */
+#define LOCK_RW 192 /* ... Which allows concurrent read & write ops */
+
+struct flock {
+ short l_type;
+ short l_whence;
+ off_t l_start;
+ off_t l_len;
+ pid_t l_pid;
+ short __unused;
+};
+
+struct flock64 {
+ short l_type;
+ short l_whence;
+ loff_t l_start;
+ loff_t l_len;
+ pid_t l_pid;
+ short __unused;
+};
+
+#define F_LINUX_SPECIFIC_BASE 1024
+#endif
diff --git a/include/asm-sparc/fixmap.h b/include/asm-sparc/fixmap.h
new file mode 100644
index 000000000000..9de52b4d2cfb
--- /dev/null
+++ b/include/asm-sparc/fixmap.h
@@ -0,0 +1,111 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the top of unused virtual memory (0xfd000000 - 1 page) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanism,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+ FIX_HOLE,
+#ifdef CONFIG_HIGHMEM
+ FIX_KMAP_BEGIN,
+ FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+ __end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+ unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+ __set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+ __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between IO pages at 0xfd000000 and
+ * the start of the fixmap.
+ */
+#define FIXADDR_TOP (0xfcfff000UL)
+#define FIXADDR_SIZE ((__end_of_fixed_addresses) << PAGE_SHIFT)
+#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+ /*
+ * this branch gets completely eliminated after inlining,
+ * except when someone tries to use fixaddr indices in an
+ * illegal way. (such as mixing up address types or using
+ * out-of-range indices).
+ *
+ * If it doesn't get removed, the linker will complain
+ * loudly with a reasonably clear error message..
+ */
+ if (idx >= __end_of_fixed_addresses)
+ __this_fixmap_does_not_exist();
+
+ return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+ BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+ return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/include/asm-sparc/floppy.h b/include/asm-sparc/floppy.h
new file mode 100644
index 000000000000..780ee7ff9dc3
--- /dev/null
+++ b/include/asm-sparc/floppy.h
@@ -0,0 +1,369 @@
+/* asm-sparc/floppy.h: Sparc specific parts of the Floppy driver.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC_FLOPPY_H
+#define __ASM_SPARC_FLOPPY_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/idprom.h>
+#include <asm/machines.h>
+#include <asm/oplib.h>
+#include <asm/auxio.h>
+#include <asm/irq.h>
+
+/* We don't need no stinkin' I/O port allocation crap. */
+#undef release_region
+#undef check_region
+#undef request_region
+#define release_region(X, Y) do { } while(0)
+#define check_region(X, Y) (0)
+#define request_region(X, Y, Z) (1)
+
+/* References:
+ * 1) Netbsd Sun floppy driver.
+ * 2) NCR 82077 controller manual
+ * 3) Intel 82077 controller manual
+ */
+struct sun_flpy_controller {
+ volatile unsigned char status_82072; /* Main Status reg. */
+#define dcr_82072 status_82072 /* Digital Control reg. */
+#define status1_82077 status_82072 /* Auxiliary Status reg. 1 */
+
+ volatile unsigned char data_82072; /* Data fifo. */
+#define status2_82077 data_82072 /* Auxiliary Status reg. 2 */
+
+ volatile unsigned char dor_82077; /* Digital Output reg. */
+ volatile unsigned char tapectl_82077; /* What the? Tape control reg? */
+
+ volatile unsigned char status_82077; /* Main Status Register. */
+#define drs_82077 status_82077 /* Digital Rate Select reg. */
+
+ volatile unsigned char data_82077; /* Data fifo. */
+ volatile unsigned char ___unused;
+ volatile unsigned char dir_82077; /* Digital Input reg. */
+#define dcr_82077 dir_82077 /* Config Control reg. */
+};
+
+/* You'll only ever find one controller on a SparcStation anyways. */
+static struct sun_flpy_controller *sun_fdc = NULL;
+volatile unsigned char *fdc_status;
+
+struct sun_floppy_ops {
+ unsigned char (*fd_inb)(int port);
+ void (*fd_outb)(unsigned char value, int port);
+};
+
+static struct sun_floppy_ops sun_fdops;
+
+#define fd_inb(port) sun_fdops.fd_inb(port)
+#define fd_outb(value,port) sun_fdops.fd_outb(value,port)
+#define fd_enable_dma() sun_fd_enable_dma()
+#define fd_disable_dma() sun_fd_disable_dma()
+#define fd_request_dma() (0) /* nothing... */
+#define fd_free_dma() /* nothing... */
+#define fd_clear_dma_ff() /* nothing... */
+#define fd_set_dma_mode(mode) sun_fd_set_dma_mode(mode)
+#define fd_set_dma_addr(addr) sun_fd_set_dma_addr(addr)
+#define fd_set_dma_count(count) sun_fd_set_dma_count(count)
+#define fd_enable_irq() /* nothing... */
+#define fd_disable_irq() /* nothing... */
+#define fd_cacheflush(addr, size) /* nothing... */
+#define fd_request_irq() sun_fd_request_irq()
+#define fd_free_irq() /* nothing... */
+#if 0 /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */
+#define fd_dma_mem_alloc(size) ((unsigned long) vmalloc(size))
+#define fd_dma_mem_free(addr,size) (vfree((void *)(addr)))
+#endif
+
+#define FLOPPY_MOTOR_MASK 0x10
+
+/* XXX This isn't really correct. XXX */
+#define get_dma_residue(x) (0)
+
+#define FLOPPY0_TYPE 4
+#define FLOPPY1_TYPE 0
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+/* Here is where we catch the floppy driver trying to initialize,
+ * therefore this is where we call the PROM device tree probing
+ * routine etc. on the Sparc.
+ */
+#define FDC1 sun_floppy_init()
+
+#define N_FDC 1
+#define N_DRIVE 8
+
+/* No 64k boundary crossing problems on the Sparc. */
+#define CROSS_64KB(a,s) (0)
+
+/* Routines unique to each controller type on a Sun. */
+static unsigned char sun_82072_fd_inb(int port)
+{
+ udelay(5);
+ switch(port & 7) {
+ default:
+ printk("floppy: Asked to read unknown port %d\n", port);
+ panic("floppy: Port bolixed.");
+ case 4: /* FD_STATUS */
+ return sun_fdc->status_82072 & ~STATUS_DMA;
+ case 5: /* FD_DATA */
+ return sun_fdc->data_82072;
+ case 7: /* FD_DIR */
+ return (get_auxio() & AUXIO_FLPY_DCHG)? 0x80: 0;
+ };
+ panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82072_fd_outb(unsigned char value, int port)
+{
+ udelay(5);
+ switch(port & 7) {
+ default:
+ printk("floppy: Asked to write to unknown port %d\n", port);
+ panic("floppy: Port bolixed.");
+ case 2: /* FD_DOR */
+ /* Oh geese, 82072 on the Sun has no DOR register,
+ * the functionality is implemented via the AUXIO
+ * I/O register. So we must emulate the behavior.
+ *
+ * ASSUMPTIONS: There will only ever be one floppy
+ * drive attached to a Sun controller
+ * and it will be at drive zero.
+ */
+ {
+ unsigned bits = 0;
+ if (value & 0x10) bits |= AUXIO_FLPY_DSEL;
+ if ((value & 0x80) == 0) bits |= AUXIO_FLPY_EJCT;
+ set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT));
+ }
+ break;
+ case 5: /* FD_DATA */
+ sun_fdc->data_82072 = value;
+ break;
+ case 7: /* FD_DCR */
+ sun_fdc->dcr_82072 = value;
+ break;
+ case 4: /* FD_STATUS */
+ sun_fdc->status_82072 = value;
+ break;
+ };
+ return;
+}
+
+static unsigned char sun_82077_fd_inb(int port)
+{
+ udelay(5);
+ switch(port & 7) {
+ default:
+ printk("floppy: Asked to read unknown port %d\n", port);
+ panic("floppy: Port bolixed.");
+ case 4: /* FD_STATUS */
+ return sun_fdc->status_82077 & ~STATUS_DMA;
+ case 5: /* FD_DATA */
+ return sun_fdc->data_82077;
+ case 7: /* FD_DIR */
+ /* XXX: Is DCL on 0x80 in sun4m? */
+ return sun_fdc->dir_82077;
+ };
+ panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82077_fd_outb(unsigned char value, int port)
+{
+ udelay(5);
+ switch(port & 7) {
+ default:
+ printk("floppy: Asked to write to unknown port %d\n", port);
+ panic("floppy: Port bolixed.");
+ case 2: /* FD_DOR */
+ /* Happily, the 82077 has a real DOR register. */
+ sun_fdc->dor_82077 = value;
+ break;
+ case 5: /* FD_DATA */
+ sun_fdc->data_82077 = value;
+ break;
+ case 7: /* FD_DCR */
+ sun_fdc->dcr_82077 = value;
+ break;
+ case 4: /* FD_STATUS */
+ sun_fdc->status_82077 = value;
+ break;
+ };
+ return;
+}
+
+/* For pseudo-dma (Sun floppy drives have no real DMA available to
+ * them so we must eat the data fifo bytes directly ourselves) we have
+ * three state variables. doing_pdma tells our inline low-level
+ * assembly floppy interrupt entry point whether it should sit and eat
+ * bytes from the fifo or just transfer control up to the higher level
+ * floppy interrupt c-code. I tried very hard but I could not get the
+ * pseudo-dma to work in c-code without getting many overruns and
+ * underruns. If non-zero, doing_pdma encodes the direction of
+ * the transfer for debugging. 1=read 2=write
+ */
+char *pdma_vaddr;
+unsigned long pdma_size;
+volatile int doing_pdma = 0;
+
+/* This is software state */
+char *pdma_base = NULL;
+unsigned long pdma_areasize;
+
+/* Common routines to all controller types on the Sparc. */
+static __inline__ void virtual_dma_init(void)
+{
+ /* nothing... */
+}
+
+static __inline__ void sun_fd_disable_dma(void)
+{
+ doing_pdma = 0;
+ if (pdma_base) {
+ mmu_unlockarea(pdma_base, pdma_areasize);
+ pdma_base = 0;
+ }
+}
+
+static __inline__ void sun_fd_set_dma_mode(int mode)
+{
+ switch(mode) {
+ case DMA_MODE_READ:
+ doing_pdma = 1;
+ break;
+ case DMA_MODE_WRITE:
+ doing_pdma = 2;
+ break;
+ default:
+ printk("Unknown dma mode %d\n", mode);
+ panic("floppy: Giving up...");
+ }
+}
+
+static __inline__ void sun_fd_set_dma_addr(char *buffer)
+{
+ pdma_vaddr = buffer;
+}
+
+static __inline__ void sun_fd_set_dma_count(int length)
+{
+ pdma_size = length;
+}
+
+static __inline__ void sun_fd_enable_dma(void)
+{
+ pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
+ pdma_base = pdma_vaddr;
+ pdma_areasize = pdma_size;
+}
+
+/* Our low-level entry point in arch/sparc/kernel/entry.S */
+irqreturn_t floppy_hardint(int irq, void *unused, struct pt_regs *regs);
+
+static int sun_fd_request_irq(void)
+{
+ static int once = 0;
+ int error;
+
+ if(!once) {
+ once = 1;
+ error = request_fast_irq(FLOPPY_IRQ, floppy_hardint, SA_INTERRUPT, "floppy");
+ return ((error == 0) ? 0 : -1);
+ } else return 0;
+}
+
+static struct linux_prom_registers fd_regs[2];
+
+static int sun_floppy_init(void)
+{
+ char state[128];
+ int tnode, fd_node, num_regs;
+ struct resource r;
+
+ use_virtual_dma = 1;
+
+ FLOPPY_IRQ = 11;
+ /* Forget it if we aren't on a machine that could possibly
+ * ever have a floppy drive.
+ */
+ if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) ||
+ ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) ||
+ (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) {
+ /* We certainly don't have a floppy controller. */
+ goto no_sun_fdc;
+ }
+ /* Well, try to find one. */
+ tnode = prom_getchild(prom_root_node);
+ fd_node = prom_searchsiblings(tnode, "obio");
+ if(fd_node != 0) {
+ tnode = prom_getchild(fd_node);
+ fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo");
+ } else {
+ fd_node = prom_searchsiblings(tnode, "fd");
+ }
+ if(fd_node == 0) {
+ goto no_sun_fdc;
+ }
+
+ /* The sun4m lets us know if the controller is actually usable. */
+ if(sparc_cpu_model == sun4m &&
+ prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) {
+ if(!strcmp(state, "disabled")) {
+ goto no_sun_fdc;
+ }
+ }
+ num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs));
+ num_regs = (num_regs / sizeof(fd_regs[0]));
+ prom_apply_obio_ranges(fd_regs, num_regs);
+ memset(&r, 0, sizeof(r));
+ r.flags = fd_regs[0].which_io;
+ r.start = fd_regs[0].phys_addr;
+ sun_fdc = (struct sun_flpy_controller *)
+ sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
+
+ /* Last minute sanity check... */
+ if(sun_fdc->status_82072 == 0xff) {
+ sun_fdc = NULL;
+ goto no_sun_fdc;
+ }
+
+ if(sparc_cpu_model == sun4c) {
+ sun_fdops.fd_inb = sun_82072_fd_inb;
+ sun_fdops.fd_outb = sun_82072_fd_outb;
+ fdc_status = &sun_fdc->status_82072;
+ /* printk("AUXIO @0x%lx\n", auxio_register); */ /* P3 */
+ } else {
+ sun_fdops.fd_inb = sun_82077_fd_inb;
+ sun_fdops.fd_outb = sun_82077_fd_outb;
+ fdc_status = &sun_fdc->status_82077;
+ /* printk("DOR @0x%p\n", &sun_fdc->dor_82077); */ /* P3 */
+ }
+
+ /* Success... */
+ allowed_drive_mask = 0x01;
+ return (int) sun_fdc;
+
+no_sun_fdc:
+ return -1;
+}
+
+static int sparc_eject(void)
+{
+ set_dor(0x00, 0xff, 0x90);
+ udelay(500);
+ set_dor(0x00, 0x6f, 0x00);
+ udelay(500);
+ return 0;
+}
+
+#define fd_eject(drive) sparc_eject()
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* !(__ASM_SPARC_FLOPPY_H) */
diff --git a/include/asm-sparc/hardirq.h b/include/asm-sparc/hardirq.h
new file mode 100644
index 000000000000..2a668c479f68
--- /dev/null
+++ b/include/asm-sparc/hardirq.h
@@ -0,0 +1,24 @@
+/* hardirq.h: 32-bit Sparc hard IRQ support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998-2000 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef __SPARC_HARDIRQ_H
+#define __SPARC_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */
+typedef struct {
+ unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS 8
+
+#endif /* __SPARC_HARDIRQ_H */
diff --git a/include/asm-sparc/hdreg.h b/include/asm-sparc/hdreg.h
new file mode 100644
index 000000000000..7f7fd1af0af3
--- /dev/null
+++ b/include/asm-sparc/hdreg.h
@@ -0,0 +1 @@
+#include <asm-generic/hdreg.h>
diff --git a/include/asm-sparc/head.h b/include/asm-sparc/head.h
new file mode 100644
index 000000000000..1a03c28da92d
--- /dev/null
+++ b/include/asm-sparc/head.h
@@ -0,0 +1,125 @@
+/* $Id: head.h,v 1.39 2000/05/26 22:18:45 ecd Exp $ */
+#ifndef __SPARC_HEAD_H
+#define __SPARC_HEAD_H
+
+#define KERNBASE 0xf0000000 /* First address the kernel will eventually be */
+#define LOAD_ADDR 0x4000 /* prom jumps to us here unless this is elf /boot */
+#define SUN4C_SEGSZ (1 << 18)
+#define SRMMU_L1_KBASE_OFFSET ((KERNBASE>>24)<<2) /* Used in boot remapping. */
+#define INTS_ENAB 0x01 /* entry.S uses this. */
+
+#define SUN4_PROM_VECTOR 0xFFE81000 /* SUN4 PROM needs to be hardwired */
+
+#define WRITE_PAUSE nop; nop; nop; /* Have to do this after %wim/%psr chg */
+#define NOP_INSN 0x01000000 /* Used to patch sparc_save_state */
+
+/* Here are some trap goodies */
+
+/* Generic trap entry. */
+#define TRAP_ENTRY(type, label) \
+ rd %psr, %l0; b label; rd %wim, %l3; nop;
+
+/* Data/text faults. Defaults to sun4c version at boot time. */
+#define SPARC_TFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 1, %l7;
+#define SPARC_DFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 0, %l7;
+#define SRMMU_TFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 1, %l7;
+#define SRMMU_DFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 0, %l7;
+
+/* This is for traps we should NEVER get. */
+#define BAD_TRAP(num) \
+ rd %psr, %l0; mov num, %l7; b bad_trap_handler; rd %wim, %l3;
+
+/* This is for traps when we want just skip the instruction which caused it */
+#define SKIP_TRAP(type, name) \
+ jmpl %l2, %g0; rett %l2 + 4; nop; nop;
+
+/* Notice that for the system calls we pull a trick. We load up a
+ * different pointer to the system call vector table in %l7, but call
+ * the same generic system call low-level entry point. The trap table
+ * entry sequences are also HyperSparc pipeline friendly ;-)
+ */
+
+/* Software trap for Linux system calls. */
+#define LINUX_SYSCALL_TRAP \
+ sethi %hi(sys_call_table), %l7; \
+ or %l7, %lo(sys_call_table), %l7; \
+ b linux_sparc_syscall; \
+ rd %psr, %l0;
+
+/* Software trap for SunOS4.1.x system calls. */
+#define SUNOS_SYSCALL_TRAP \
+ rd %psr, %l0; \
+ sethi %hi(sunos_sys_table), %l7; \
+ b linux_sparc_syscall; \
+ or %l7, %lo(sunos_sys_table), %l7;
+
+#define SUNOS_NO_SYSCALL_TRAP \
+ b sunos_syscall; \
+ rd %psr, %l0; \
+ nop; \
+ nop;
+
+/* Software trap for Slowaris system calls. */
+#define SOLARIS_SYSCALL_TRAP \
+ b solaris_syscall; \
+ rd %psr, %l0; \
+ nop; \
+ nop;
+
+#define INDIRECT_SOLARIS_SYSCALL(x) \
+ mov x, %g1; \
+ b solaris_syscall; \
+ rd %psr, %l0; \
+ nop;
+
+#define BREAKPOINT_TRAP \
+ b breakpoint_trap; \
+ rd %psr,%l0; \
+ nop; \
+ nop;
+
+/* Software trap for Sparc-netbsd system calls. */
+#define NETBSD_SYSCALL_TRAP \
+ sethi %hi(sys_call_table), %l7; \
+ or %l7, %lo(sys_call_table), %l7; \
+ b bsd_syscall; \
+ rd %psr, %l0;
+
+/* The Get Condition Codes software trap for userland. */
+#define GETCC_TRAP \
+ b getcc_trap_handler; mov %psr, %l0; nop; nop;
+
+/* The Set Condition Codes software trap for userland. */
+#define SETCC_TRAP \
+ b setcc_trap_handler; mov %psr, %l0; nop; nop;
+
+/* The Get PSR software trap for userland. */
+#define GETPSR_TRAP \
+ mov %psr, %i0; jmp %l2; rett %l2 + 4; nop;
+
+/* This is for hard interrupts from level 1-14, 15 is non-maskable (nmi) and
+ * gets handled with another macro.
+ */
+#define TRAP_ENTRY_INTERRUPT(int_level) \
+ mov int_level, %l7; rd %psr, %l0; b real_irq_entry; rd %wim, %l3;
+
+/* NMI's (Non Maskable Interrupts) are special, you can't keep them
+ * from coming in, and basically if you get one, the shows over. ;(
+ * On the sun4c they are usually asynchronous memory errors, on the
+ * the sun4m they could be either due to mem errors or a software
+ * initiated interrupt from the prom/kern on an SMP box saying "I
+ * command you to do CPU tricks, read your mailbox for more info."
+ */
+#define NMI_TRAP \
+ rd %wim, %l3; b linux_trap_nmi_sun4c; mov %psr, %l0; nop;
+
+/* Window overflows/underflows are special and we need to try to be as
+ * efficient as possible here....
+ */
+#define WINDOW_SPILL \
+ rd %psr, %l0; rd %wim, %l3; b spill_window_entry; andcc %l0, PSR_PS, %g0;
+
+#define WINDOW_FILL \
+ rd %psr, %l0; rd %wim, %l3; b fill_window_entry; andcc %l0, PSR_PS, %g0;
+
+#endif /* __SPARC_HEAD_H */
diff --git a/include/asm-sparc/highmem.h b/include/asm-sparc/highmem.h
new file mode 100644
index 000000000000..3de42e776274
--- /dev/null
+++ b/include/asm-sparc/highmem.h
@@ -0,0 +1,81 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ * Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/interrupt.h>
+#include <asm/fixmap.h>
+#include <asm/vaddrs.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+extern void kmap_init(void) __init;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM. Currently the simplest way to do this is to align the
+ * pkmap region on a pagetable boundary (4MB).
+ */
+#define LAST_PKMAP 1024
+#define PKMAP_SIZE (LAST_PKMAP << PAGE_SHIFT)
+#define PKMAP_BASE PMD_ALIGN(SRMMU_NOCACHE_VADDR + (SRMMU_MAX_NOCACHE_PAGES << PAGE_SHIFT))
+
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define PKMAP_END (PKMAP_ADDR(LAST_PKMAP))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline void *kmap(struct page *page)
+{
+ BUG_ON(in_interrupt());
+ if (!PageHighMem(page))
+ return page_address(page);
+ return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+ BUG_ON(in_interrupt());
+ if (!PageHighMem(page))
+ return;
+ kunmap_high(page);
+}
+
+extern void *kmap_atomic(struct page *page, enum km_type type);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
+extern struct page *kmap_atomic_to_page(void *vaddr);
+
+#define flush_cache_kmaps() flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-sparc/hw_irq.h b/include/asm-sparc/hw_irq.h
new file mode 100644
index 000000000000..8d30a7694be2
--- /dev/null
+++ b/include/asm-sparc/hw_irq.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SPARC_HW_IRQ_H
+#define __ASM_SPARC_HW_IRQ_H
+
+/* Dummy include. */
+
+#endif
diff --git a/include/asm-sparc/ide.h b/include/asm-sparc/ide.h
new file mode 100644
index 000000000000..64d810385ea4
--- /dev/null
+++ b/include/asm-sparc/ide.h
@@ -0,0 +1,100 @@
+/* $Id: ide.h,v 1.7 2002/01/16 20:58:40 davem Exp $
+ * ide.h: SPARC PCI specific IDE glue.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
+ * Adaptation from sparc64 version to sparc by Pete Zaitcev.
+ */
+
+#ifndef _SPARC_IDE_H
+#define _SPARC_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/psr.h>
+
+#undef MAX_HWIFS
+#define MAX_HWIFS 2
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
+
+#define __ide_insl(data_reg, buffer, wcount) \
+ __ide_insw(data_reg, buffer, (wcount)<<1)
+#define __ide_outsl(data_reg, buffer, wcount) \
+ __ide_outsw(data_reg, buffer, (wcount)<<1)
+
+/* On sparc, I/O ports and MMIO registers are accessed identically. */
+#define __ide_mm_insw __ide_insw
+#define __ide_mm_insl __ide_insl
+#define __ide_mm_outsw __ide_outsw
+#define __ide_mm_outsl __ide_outsl
+
+static __inline__ void __ide_insw(unsigned long port,
+ void *dst,
+ unsigned long count)
+{
+ volatile unsigned short *data_port;
+ /* unsigned long end = (unsigned long)dst + (count << 1); */ /* P3 */
+ u16 *ps = dst;
+ u32 *pi;
+
+ data_port = (volatile unsigned short *)port;
+
+ if(((unsigned long)ps) & 0x2) {
+ *ps++ = *data_port;
+ count--;
+ }
+ pi = (u32 *)ps;
+ while(count >= 2) {
+ u32 w;
+
+ w = (*data_port) << 16;
+ w |= (*data_port);
+ *pi++ = w;
+ count -= 2;
+ }
+ ps = (u16 *)pi;
+ if(count)
+ *ps++ = *data_port;
+
+ /* __flush_dcache_range((unsigned long)dst, end); */ /* P3 see hme */
+}
+
+static __inline__ void __ide_outsw(unsigned long port,
+ const void *src,
+ unsigned long count)
+{
+ volatile unsigned short *data_port;
+ /* unsigned long end = (unsigned long)src + (count << 1); */
+ const u16 *ps = src;
+ const u32 *pi;
+
+ data_port = (volatile unsigned short *)port;
+
+ if(((unsigned long)src) & 0x2) {
+ *data_port = *ps++;
+ count--;
+ }
+ pi = (const u32 *)ps;
+ while(count >= 2) {
+ u32 w;
+
+ w = *pi++;
+ *data_port = (w >> 16);
+ *data_port = w;
+ count -= 2;
+ }
+ ps = (const u16 *)pi;
+ if(count)
+ *data_port = *ps;
+
+ /* __flush_dcache_range((unsigned long)src, end); */ /* P3 see hme */
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC_IDE_H */
diff --git a/include/asm-sparc/idprom.h b/include/asm-sparc/idprom.h
new file mode 100644
index 000000000000..d856e640acd3
--- /dev/null
+++ b/include/asm-sparc/idprom.h
@@ -0,0 +1,33 @@
+/* $Id: idprom.h,v 1.6 1996/08/04 10:35:07 ecd Exp $
+ * idprom.h: Macros and defines for idprom routines
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_IDPROM_H
+#define _SPARC_IDPROM_H
+
+/* Offset into the EEPROM where the id PROM is located on the 4c */
+#define IDPROM_OFFSET 0x7d8
+
+/* On sun4m; physical. */
+/* MicroSPARC(-II) does not decode 31rd bit, but it works. */
+#define IDPROM_OFFSET_M 0xfd8
+
+struct idprom
+{
+ unsigned char id_format; /* Format identifier (always 0x01) */
+ unsigned char id_machtype; /* Machine type */
+ unsigned char id_ethaddr[6]; /* Hardware ethernet address */
+ long id_date; /* Date of manufacture */
+ unsigned int id_sernum:24; /* Unique serial number */
+ unsigned char id_cksum; /* Checksum - xor of the data bytes */
+ unsigned char reserved[16];
+};
+
+extern struct idprom *idprom;
+extern void idprom_init(void);
+
+#define IDPROM_SIZE (sizeof(struct idprom))
+
+#endif /* !(_SPARC_IDPROM_H) */
diff --git a/include/asm-sparc/io-unit.h b/include/asm-sparc/io-unit.h
new file mode 100644
index 000000000000..96823b47fd45
--- /dev/null
+++ b/include/asm-sparc/io-unit.h
@@ -0,0 +1,62 @@
+/* io-unit.h: Definitions for the sun4d IO-UNIT.
+ *
+ * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_IO_UNIT_H
+#define _SPARC_IO_UNIT_H
+
+#include <linux/spinlock.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/* The io-unit handles all virtual to physical address translations
+ * that occur between the SBUS and physical memory. Access by
+ * the cpu to IO registers and similar go over the xdbus so are
+ * translated by the on chip SRMMU. The io-unit and the srmmu do
+ * not need to have the same translations at all, in fact most
+ * of the time the translations they handle are a disjunct set.
+ * Basically the io-unit handles all dvma sbus activity.
+ */
+
+/* AIEEE, unlike the nice sun4m, these monsters have
+ fixed DMA range 64M */
+
+#define IOUNIT_DMA_BASE 0xfc000000 /* TOP - 64M */
+#define IOUNIT_DMA_SIZE 0x04000000 /* 64M */
+/* We use last 1M for sparc_dvma_malloc */
+#define IOUNIT_DVMA_SIZE 0x00100000 /* 1M */
+
+/* The format of an iopte in the external page tables */
+#define IOUPTE_PAGE 0xffffff00 /* Physical page number (PA[35:12]) */
+#define IOUPTE_CACHE 0x00000080 /* Cached (in Viking/MXCC) */
+/* XXX Jakub, find out how to program SBUS streaming cache on XDBUS/sun4d.
+ * XXX Actually, all you should need to do is find out where the registers
+ * XXX are and copy over the sparc64 implementation I wrote. There may be
+ * XXX some horrible hwbugs though, so be careful. -DaveM
+ */
+#define IOUPTE_STREAM 0x00000040 /* Translation can use streaming cache */
+#define IOUPTE_INTRA 0x00000008 /* SBUS direct slot->slot transfer */
+#define IOUPTE_WRITE 0x00000004 /* Writeable */
+#define IOUPTE_VALID 0x00000002 /* IOPTE is valid */
+#define IOUPTE_PARITY 0x00000001 /* Parity is checked during DVMA */
+
+struct iounit_struct {
+ unsigned long bmap[(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 3)) / sizeof(unsigned long)];
+ spinlock_t lock;
+ iopte_t *page_table;
+ unsigned long rotor[3];
+ unsigned long limit[4];
+};
+
+#define IOUNIT_BMAP1_START 0x00000000
+#define IOUNIT_BMAP1_END (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 1))
+#define IOUNIT_BMAP2_START IOUNIT_BMAP1_END
+#define IOUNIT_BMAP2_END IOUNIT_BMAP2_START + (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 2))
+#define IOUNIT_BMAPM_START IOUNIT_BMAP2_END
+#define IOUNIT_BMAPM_END ((IOUNIT_DMA_SIZE - IOUNIT_DVMA_SIZE) >> PAGE_SHIFT)
+
+extern __u32 iounit_map_dma_init(struct sbus_bus *, int);
+#define iounit_map_dma_finish(sbus, addr, len) mmu_release_scsi_one(addr, len, sbus)
+extern __u32 iounit_map_dma_page(__u32, void *, struct sbus_bus *);
+
+#endif /* !(_SPARC_IO_UNIT_H) */
diff --git a/include/asm-sparc/io.h b/include/asm-sparc/io.h
new file mode 100644
index 000000000000..a42df208d590
--- /dev/null
+++ b/include/asm-sparc/io.h
@@ -0,0 +1,290 @@
+/*
+ * $Id: io.h,v 1.30 2001/12/21 01:23:21 davem Exp $
+ */
+#ifndef __SPARC_IO_H
+#define __SPARC_IO_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h> /* struct resource */
+
+#include <asm/page.h> /* IO address mapping routines need this */
+#include <asm/system.h>
+
+#define page_to_phys(page) (((page) - mem_map) << PAGE_SHIFT)
+
+static inline u32 flip_dword (u32 l)
+{
+ return ((l&0xff)<<24) | (((l>>8)&0xff)<<16) | (((l>>16)&0xff)<<8)| ((l>>24)&0xff);
+}
+
+static inline u16 flip_word (u16 w)
+{
+ return ((w&0xff) << 8) | ((w>>8)&0xff);
+}
+
+#define mmiowb()
+
+/*
+ * Memory mapped I/O to PCI
+ */
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+ return *(__force volatile u8 *)addr;
+}
+
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+ return *(__force volatile u16 *)addr;
+}
+
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+ return *(__force volatile u32 *)addr;
+}
+
+static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+ *(__force volatile u8 *)addr = b;
+}
+
+static inline void __raw_writew(u16 w, volatile void __iomem *addr)
+{
+ *(__force volatile u16 *)addr = w;
+}
+
+static inline void __raw_writel(u32 l, volatile void __iomem *addr)
+{
+ *(__force volatile u32 *)addr = l;
+}
+
+static inline u8 __readb(const volatile void __iomem *addr)
+{
+ return *(__force volatile u8 *)addr;
+}
+
+static inline u16 __readw(const volatile void __iomem *addr)
+{
+ return flip_word(*(__force volatile u16 *)addr);
+}
+
+static inline u32 __readl(const volatile void __iomem *addr)
+{
+ return flip_dword(*(__force volatile u32 *)addr);
+}
+
+static inline void __writeb(u8 b, volatile void __iomem *addr)
+{
+ *(__force volatile u8 *)addr = b;
+}
+
+static inline void __writew(u16 w, volatile void __iomem *addr)
+{
+ *(__force volatile u16 *)addr = flip_word(w);
+}
+
+static inline void __writel(u32 l, volatile void __iomem *addr)
+{
+ *(__force volatile u32 *)addr = flip_dword(l);
+}
+
+#define readb(__addr) __readb(__addr)
+#define readw(__addr) __readw(__addr)
+#define readl(__addr) __readl(__addr)
+#define readb_relaxed(__addr) readb(__addr)
+#define readw_relaxed(__addr) readw(__addr)
+#define readl_relaxed(__addr) readl(__addr)
+
+#define writeb(__b, __addr) __writeb((__b),(__addr))
+#define writew(__w, __addr) __writew((__w),(__addr))
+#define writel(__l, __addr) __writel((__l),(__addr))
+
+/*
+ * I/O space operations
+ *
+ * Arrangement on a Sun is somewhat complicated.
+ *
+ * First of all, we want to use standard Linux drivers
+ * for keyboard, PC serial, etc. These drivers think
+ * they access I/O space and use inb/outb.
+ * On the other hand, EBus bridge accepts PCI *memory*
+ * cycles and converts them into ISA *I/O* cycles.
+ * Ergo, we want inb & outb to generate PCI memory cycles.
+ *
+ * If we want to issue PCI *I/O* cycles, we do this
+ * with a low 64K fixed window in PCIC. This window gets
+ * mapped somewhere into virtual kernel space and we
+ * can use inb/outb again.
+ */
+#define inb_local(__addr) __readb((void __iomem *)(unsigned long)(__addr))
+#define inb(__addr) __readb((void __iomem *)(unsigned long)(__addr))
+#define inw(__addr) __readw((void __iomem *)(unsigned long)(__addr))
+#define inl(__addr) __readl((void __iomem *)(unsigned long)(__addr))
+
+#define outb_local(__b, __addr) __writeb(__b, (void __iomem *)(unsigned long)(__addr))
+#define outb(__b, __addr) __writeb(__b, (void __iomem *)(unsigned long)(__addr))
+#define outw(__w, __addr) __writew(__w, (void __iomem *)(unsigned long)(__addr))
+#define outl(__l, __addr) __writel(__l, (void __iomem *)(unsigned long)(__addr))
+
+#define inb_p(__addr) inb(__addr)
+#define outb_p(__b, __addr) outb(__b, __addr)
+#define inw_p(__addr) inw(__addr)
+#define outw_p(__w, __addr) outw(__w, __addr)
+#define inl_p(__addr) inl(__addr)
+#define outl_p(__l, __addr) outl(__l, __addr)
+
+void outsb(unsigned long addr, const void *src, unsigned long cnt);
+void outsw(unsigned long addr, const void *src, unsigned long cnt);
+void outsl(unsigned long addr, const void *src, unsigned long cnt);
+void insb(unsigned long addr, void *dst, unsigned long count);
+void insw(unsigned long addr, void *dst, unsigned long count);
+void insl(unsigned long addr, void *dst, unsigned long count);
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * SBus accessors.
+ *
+ * SBus has only one, memory mapped, I/O space.
+ * We do not need to flip bytes for SBus of course.
+ */
+static inline u8 _sbus_readb(const volatile void __iomem *addr)
+{
+ return *(__force volatile u8 *)addr;
+}
+
+static inline u16 _sbus_readw(const volatile void __iomem *addr)
+{
+ return *(__force volatile u16 *)addr;
+}
+
+static inline u32 _sbus_readl(const volatile void __iomem *addr)
+{
+ return *(__force volatile u32 *)addr;
+}
+
+static inline void _sbus_writeb(u8 b, volatile void __iomem *addr)
+{
+ *(__force volatile u8 *)addr = b;
+}
+
+static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
+{
+ *(__force volatile u16 *)addr = w;
+}
+
+static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
+{
+ *(__force volatile u32 *)addr = l;
+}
+
+/*
+ * The only reason for #define's is to hide casts to unsigned long.
+ */
+#define sbus_readb(__addr) _sbus_readb(__addr)
+#define sbus_readw(__addr) _sbus_readw(__addr)
+#define sbus_readl(__addr) _sbus_readl(__addr)
+#define sbus_writeb(__b, __addr) _sbus_writeb(__b, __addr)
+#define sbus_writew(__w, __addr) _sbus_writew(__w, __addr)
+#define sbus_writel(__l, __addr) _sbus_writel(__l, __addr)
+
+static inline void sbus_memset_io(volatile void __iomem *__dst, int c, __kernel_size_t n)
+{
+ while(n--) {
+ sbus_writeb(c, __dst);
+ __dst++;
+ }
+}
+
+static inline void
+_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+ volatile void __iomem *d = dst;
+
+ while (n--) {
+ writeb(c, d);
+ d++;
+ }
+}
+
+#define memset_io(d,c,sz) _memset_io(d,c,sz)
+
+static inline void
+_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n)
+{
+ char *d = dst;
+
+ while (n--) {
+ char tmp = readb(src);
+ *d++ = tmp;
+ src++;
+ }
+}
+
+#define memcpy_fromio(d,s,sz) _memcpy_fromio(d,s,sz)
+
+static inline void
+_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n)
+{
+ const char *s = src;
+ volatile void __iomem *d = dst;
+
+ while (n--) {
+ char tmp = *s++;
+ writeb(tmp, d);
+ d++;
+ }
+}
+
+#define memcpy_toio(d,s,sz) _memcpy_toio(d,s,sz)
+
+#ifdef __KERNEL__
+
+/*
+ * Bus number may be embedded in the higher bits of the physical address.
+ * This is why we have no bus number argument to ioremap().
+ */
+extern void __iomem *ioremap(unsigned long offset, unsigned long size);
+#define ioremap_nocache(X,Y) ioremap((X),(Y))
+extern void iounmap(volatile void __iomem *addr);
+
+/*
+ * Bus number may be in res->flags... somewhere.
+ */
+extern void __iomem *sbus_ioremap(struct resource *res, unsigned long offset,
+ unsigned long size, char *name);
+extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size);
+
+
+/*
+ * At the moment, we do not use CMOS_READ anywhere outside of rtc.c,
+ * so rtc_port is static in it. This should not change unless a new
+ * hardware pops up.
+ */
+#define RTC_PORT(x) (rtc_port + (x))
+#define RTC_ALWAYS_BCD 0
+
+/* Nothing to do */
+/* P3: Only IDE DMA may need these. XXX Verify that it still does... */
+
+#define dma_cache_inv(_start,_size) do { } while (0)
+#define dma_cache_wback(_start,_size) do { } while (0)
+#define dma_cache_wback_inv(_start,_size) do { } while (0)
+
+#endif
+
+#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED 1
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+#endif /* !(__SPARC_IO_H) */
diff --git a/include/asm-sparc/ioctl.h b/include/asm-sparc/ioctl.h
new file mode 100644
index 000000000000..e6fc4de19940
--- /dev/null
+++ b/include/asm-sparc/ioctl.h
@@ -0,0 +1,68 @@
+/* $Id: ioctl.h,v 1.6 1999/12/01 23:58:36 davem Exp $ */
+#ifndef _SPARC_IOCTL_H
+#define _SPARC_IOCTL_H
+
+/*
+ * Our DIR and SIZE overlap in order to simulteneously provide
+ * a non-zero _IOC_NONE (for binary compatibility) and
+ * 14 bits of size as on i386. Here's the layout:
+ *
+ * 0xE0000000 DIR
+ * 0x80000000 DIR = WRITE
+ * 0x40000000 DIR = READ
+ * 0x20000000 DIR = NONE
+ * 0x3FFF0000 SIZE (overlaps NONE bit)
+ * 0x0000FF00 TYPE
+ * 0x000000FF NR (CMD)
+ */
+
+#define _IOC_NRBITS 8
+#define _IOC_TYPEBITS 8
+#define _IOC_SIZEBITS 13 /* Actually 14, see below. */
+#define _IOC_DIRBITS 3
+
+#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1)
+#define _IOC_XSIZEMASK ((1 << (_IOC_SIZEBITS+1))-1)
+#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT 0
+#define _IOC_TYPESHIFT (_IOC_NRSHIFT + _IOC_NRBITS)
+#define _IOC_SIZESHIFT (_IOC_TYPESHIFT + _IOC_TYPEBITS)
+#define _IOC_DIRSHIFT (_IOC_SIZESHIFT + _IOC_SIZEBITS)
+
+#define _IOC_NONE 1U
+#define _IOC_READ 2U
+#define _IOC_WRITE 4U
+
+#define _IOC(dir,type,nr,size) \
+ (((dir) << _IOC_DIRSHIFT) | \
+ ((type) << _IOC_TYPESHIFT) | \
+ ((nr) << _IOC_NRSHIFT) | \
+ ((size) << _IOC_SIZESHIFT))
+
+#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* Used to decode ioctl numbers in drivers despite the leading underscore... */
+#define _IOC_DIR(nr) \
+ ( (((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) != 0)? \
+ (((nr) >> _IOC_DIRSHIFT) & (_IOC_WRITE|_IOC_READ)): \
+ (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) )
+#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr) \
+ ((((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) == 0)? \
+ 0: (((nr) >> _IOC_SIZESHIFT) & _IOC_XSIZEMASK))
+
+/* ...and for the PCMCIA and sound. */
+#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK (_IOC_XSIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT (_IOC_SIZESHIFT)
+
+#endif /* !(_SPARC_IOCTL_H) */
diff --git a/include/asm-sparc/ioctls.h b/include/asm-sparc/ioctls.h
new file mode 100644
index 000000000000..bdf77b0dfd8e
--- /dev/null
+++ b/include/asm-sparc/ioctls.h
@@ -0,0 +1,134 @@
+#ifndef _ASM_SPARC_IOCTLS_H
+#define _ASM_SPARC_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* Big T */
+#define TCGETA _IOR('T', 1, struct termio)
+#define TCSETA _IOW('T', 2, struct termio)
+#define TCSETAW _IOW('T', 3, struct termio)
+#define TCSETAF _IOW('T', 4, struct termio)
+#define TCSBRK _IO('T', 5)
+#define TCXONC _IO('T', 6)
+#define TCFLSH _IO('T', 7)
+#define TCGETS _IOR('T', 8, struct termios)
+#define TCSETS _IOW('T', 9, struct termios)
+#define TCSETSW _IOW('T', 10, struct termios)
+#define TCSETSF _IOW('T', 11, struct termios)
+
+/* Note that all the ioctls that are not available in Linux have a
+ * double underscore on the front to: a) avoid some programs to
+ * thing we support some ioctls under Linux (autoconfiguration stuff)
+ */
+/* Little t */
+#define TIOCGETD _IOR('t', 0, int)
+#define TIOCSETD _IOW('t', 1, int)
+#define __TIOCHPCL _IO('t', 2) /* SunOS Specific */
+#define __TIOCMODG _IOR('t', 3, int) /* SunOS Specific */
+#define __TIOCMODS _IOW('t', 4, int) /* SunOS Specific */
+#define __TIOCGETP _IOR('t', 8, struct sgttyb) /* SunOS Specific */
+#define __TIOCSETP _IOW('t', 9, struct sgttyb) /* SunOS Specific */
+#define __TIOCSETN _IOW('t', 10, struct sgttyb) /* SunOS Specific */
+#define TIOCEXCL _IO('t', 13)
+#define TIOCNXCL _IO('t', 14)
+#define __TIOCFLUSH _IOW('t', 16, int) /* SunOS Specific */
+#define __TIOCSETC _IOW('t', 17, struct tchars) /* SunOS Specific */
+#define __TIOCGETC _IOR('t', 18, struct tchars) /* SunOS Specific */
+#define __TIOCTCNTL _IOW('t', 32, int) /* SunOS Specific */
+#define __TIOCSIGNAL _IOW('t', 33, int) /* SunOS Specific */
+#define __TIOCSETX _IOW('t', 34, int) /* SunOS Specific */
+#define __TIOCGETX _IOR('t', 35, int) /* SunOS Specific */
+#define TIOCCONS _IO('t', 36)
+#define __TIOCSSIZE _IOW('t', 37, struct sunos_ttysize) /* SunOS Specific */
+#define __TIOCGSIZE _IOR('t', 38, struct sunos_ttysize) /* SunOS Specific */
+#define TIOCGSOFTCAR _IOR('t', 100, int)
+#define TIOCSSOFTCAR _IOW('t', 101, int)
+#define __TIOCUCNTL _IOW('t', 102, int) /* SunOS Specific */
+#define TIOCSWINSZ _IOW('t', 103, struct winsize)
+#define TIOCGWINSZ _IOR('t', 104, struct winsize)
+#define __TIOCREMOTE _IOW('t', 105, int) /* SunOS Specific */
+#define TIOCMGET _IOR('t', 106, int)
+#define TIOCMBIC _IOW('t', 107, int)
+#define TIOCMBIS _IOW('t', 108, int)
+#define TIOCMSET _IOW('t', 109, int)
+#define TIOCSTART _IO('t', 110)
+#define TIOCSTOP _IO('t', 111)
+#define TIOCPKT _IOW('t', 112, int)
+#define TIOCNOTTY _IO('t', 113)
+#define TIOCSTI _IOW('t', 114, char)
+#define TIOCOUTQ _IOR('t', 115, int)
+#define __TIOCGLTC _IOR('t', 116, struct ltchars) /* SunOS Specific */
+#define __TIOCSLTC _IOW('t', 117, struct ltchars) /* SunOS Specific */
+/* 118 is the non-posix setpgrp tty ioctl */
+/* 119 is the non-posix getpgrp tty ioctl */
+#define __TIOCCDTR _IO('t', 120) /* SunOS Specific */
+#define __TIOCSDTR _IO('t', 121) /* SunOS Specific */
+#define TIOCCBRK _IO('t', 122)
+#define TIOCSBRK _IO('t', 123)
+#define __TIOCLGET _IOW('t', 124, int) /* SunOS Specific */
+#define __TIOCLSET _IOW('t', 125, int) /* SunOS Specific */
+#define __TIOCLBIC _IOW('t', 126, int) /* SunOS Specific */
+#define __TIOCLBIS _IOW('t', 127, int) /* SunOS Specific */
+#define __TIOCISPACE _IOR('t', 128, int) /* SunOS Specific */
+#define __TIOCISIZE _IOR('t', 129, int) /* SunOS Specific */
+#define TIOCSPGRP _IOW('t', 130, int)
+#define TIOCGPGRP _IOR('t', 131, int)
+#define TIOCSCTTY _IO('t', 132)
+#define TIOCGSID _IOR('t', 133, int)
+/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */
+#define TIOCGPTN _IOR('t', 134, unsigned int) /* Get Pty Number */
+#define TIOCSPTLCK _IOW('t', 135, int) /* Lock/unlock PTY */
+
+/* Little f */
+#define FIOCLEX _IO('f', 1)
+#define FIONCLEX _IO('f', 2)
+#define FIOASYNC _IOW('f', 125, int)
+#define FIONBIO _IOW('f', 126, int)
+#define FIONREAD _IOR('f', 127, int)
+#define TIOCINQ FIONREAD
+#define FIOQSIZE _IOR('f', 128, loff_t)
+
+/* SCARY Rutgers local SunOS kernel hackery, perhaps I will support it
+ * someday. This is completely bogus, I know...
+ */
+#define __TCGETSTAT _IO('T', 200) /* Rutgers specific */
+#define __TCSETSTAT _IO('T', 201) /* Rutgers specific */
+
+/* Linux specific, no SunOS equivalent. */
+#define TIOCLINUX 0x541C
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TCSBRKP 0x5425
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+#define TIOCMIWAIT 0x545C /* Wait input */
+#define TIOCGICOUNT 0x545D /* Read serial port inline interrupt counts */
+
+/* Kernel definitions */
+#ifdef __KERNEL__
+#define TIOCGETC __TIOCGETC
+#define TIOCGETP __TIOCGETP
+#define TIOCGLTC __TIOCGLTC
+#define TIOCSLTC __TIOCSLTC
+#define TIOCSETP __TIOCSETP
+#define TIOCSETN __TIOCSETN
+#define TIOCSETC __TIOCSETC
+#endif
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+#endif /* !(_ASM_SPARC_IOCTLS_H) */
diff --git a/include/asm-sparc/iommu.h b/include/asm-sparc/iommu.h
new file mode 100644
index 000000000000..8171362d56b9
--- /dev/null
+++ b/include/asm-sparc/iommu.h
@@ -0,0 +1,121 @@
+/* iommu.h: Definitions for the sun4m IOMMU.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_IOMMU_H
+#define _SPARC_IOMMU_H
+
+#include <asm/page.h>
+#include <asm/bitext.h>
+
+/* The iommu handles all virtual to physical address translations
+ * that occur between the SBUS and physical memory. Access by
+ * the cpu to IO registers and similar go over the mbus so are
+ * translated by the on chip SRMMU. The iommu and the srmmu do
+ * not need to have the same translations at all, in fact most
+ * of the time the translations they handle are a disjunct set.
+ * Basically the iommu handles all dvma sbus activity.
+ */
+
+/* The IOMMU registers occupy three pages in IO space. */
+struct iommu_regs {
+ /* First page */
+ volatile unsigned long control; /* IOMMU control */
+ volatile unsigned long base; /* Physical base of iopte page table */
+ volatile unsigned long _unused1[3];
+ volatile unsigned long tlbflush; /* write only */
+ volatile unsigned long pageflush; /* write only */
+ volatile unsigned long _unused2[1017];
+ /* Second page */
+ volatile unsigned long afsr; /* Async-fault status register */
+ volatile unsigned long afar; /* Async-fault physical address */
+ volatile unsigned long _unused3[2];
+ volatile unsigned long sbuscfg0; /* SBUS configuration registers, per-slot */
+ volatile unsigned long sbuscfg1;
+ volatile unsigned long sbuscfg2;
+ volatile unsigned long sbuscfg3;
+ volatile unsigned long mfsr; /* Memory-fault status register */
+ volatile unsigned long mfar; /* Memory-fault physical address */
+ volatile unsigned long _unused4[1014];
+ /* Third page */
+ volatile unsigned long mid; /* IOMMU module-id */
+};
+
+#define IOMMU_CTRL_IMPL 0xf0000000 /* Implementation */
+#define IOMMU_CTRL_VERS 0x0f000000 /* Version */
+#define IOMMU_CTRL_RNGE 0x0000001c /* Mapping RANGE */
+#define IOMMU_RNGE_16MB 0x00000000 /* 0xff000000 -> 0xffffffff */
+#define IOMMU_RNGE_32MB 0x00000004 /* 0xfe000000 -> 0xffffffff */
+#define IOMMU_RNGE_64MB 0x00000008 /* 0xfc000000 -> 0xffffffff */
+#define IOMMU_RNGE_128MB 0x0000000c /* 0xf8000000 -> 0xffffffff */
+#define IOMMU_RNGE_256MB 0x00000010 /* 0xf0000000 -> 0xffffffff */
+#define IOMMU_RNGE_512MB 0x00000014 /* 0xe0000000 -> 0xffffffff */
+#define IOMMU_RNGE_1GB 0x00000018 /* 0xc0000000 -> 0xffffffff */
+#define IOMMU_RNGE_2GB 0x0000001c /* 0x80000000 -> 0xffffffff */
+#define IOMMU_CTRL_ENAB 0x00000001 /* IOMMU Enable */
+
+#define IOMMU_AFSR_ERR 0x80000000 /* LE, TO, or BE asserted */
+#define IOMMU_AFSR_LE 0x40000000 /* SBUS reports error after transaction */
+#define IOMMU_AFSR_TO 0x20000000 /* Write access took more than 12.8 us. */
+#define IOMMU_AFSR_BE 0x10000000 /* Write access received error acknowledge */
+#define IOMMU_AFSR_SIZE 0x0e000000 /* Size of transaction causing error */
+#define IOMMU_AFSR_S 0x01000000 /* Sparc was in supervisor mode */
+#define IOMMU_AFSR_RESV 0x00f00000 /* Reserver, forced to 0x8 by hardware */
+#define IOMMU_AFSR_ME 0x00080000 /* Multiple errors occurred */
+#define IOMMU_AFSR_RD 0x00040000 /* A read operation was in progress */
+#define IOMMU_AFSR_FAV 0x00020000 /* IOMMU afar has valid contents */
+
+#define IOMMU_SBCFG_SAB30 0x00010000 /* Phys-address bit 30 when bypass enabled */
+#define IOMMU_SBCFG_BA16 0x00000004 /* Slave supports 16 byte bursts */
+#define IOMMU_SBCFG_BA8 0x00000002 /* Slave supports 8 byte bursts */
+#define IOMMU_SBCFG_BYPASS 0x00000001 /* Bypass IOMMU, treat all addresses
+ produced by this device as pure
+ physical. */
+
+#define IOMMU_MFSR_ERR 0x80000000 /* One or more of PERR1 or PERR0 */
+#define IOMMU_MFSR_S 0x01000000 /* Sparc was in supervisor mode */
+#define IOMMU_MFSR_CPU 0x00800000 /* CPU transaction caused parity error */
+#define IOMMU_MFSR_ME 0x00080000 /* Multiple parity errors occurred */
+#define IOMMU_MFSR_PERR 0x00006000 /* high bit indicates parity error occurred
+ on the even word of the access, low bit
+ indicated odd word caused the parity error */
+#define IOMMU_MFSR_BM 0x00001000 /* Error occurred while in boot mode */
+#define IOMMU_MFSR_C 0x00000800 /* Address causing error was marked cacheable */
+#define IOMMU_MFSR_RTYP 0x000000f0 /* Memory request transaction type */
+
+#define IOMMU_MID_SBAE 0x001f0000 /* SBus arbitration enable */
+#define IOMMU_MID_SE 0x00100000 /* Enables SCSI/ETHERNET arbitration */
+#define IOMMU_MID_SB3 0x00080000 /* Enable SBUS device 3 arbitration */
+#define IOMMU_MID_SB2 0x00040000 /* Enable SBUS device 2 arbitration */
+#define IOMMU_MID_SB1 0x00020000 /* Enable SBUS device 1 arbitration */
+#define IOMMU_MID_SB0 0x00010000 /* Enable SBUS device 0 arbitration */
+#define IOMMU_MID_MID 0x0000000f /* Module-id, hardcoded to 0x8 */
+
+/* The format of an iopte in the page tables */
+#define IOPTE_PAGE 0x07ffff00 /* Physical page number (PA[30:12]) */
+#define IOPTE_CACHE 0x00000080 /* Cached (in vme IOCACHE or Viking/MXCC) */
+#define IOPTE_WRITE 0x00000004 /* Writeable */
+#define IOPTE_VALID 0x00000002 /* IOPTE is valid */
+#define IOPTE_WAZ 0x00000001 /* Write as zeros */
+
+struct iommu_struct {
+ struct iommu_regs *regs;
+ iopte_t *page_table;
+ /* For convenience */
+ unsigned long start; /* First managed virtual address */
+ unsigned long end; /* Last managed virtual address */
+
+ struct bit_map usemap;
+};
+
+extern __inline__ void iommu_invalidate(struct iommu_regs *regs)
+{
+ regs->tlbflush = 0;
+}
+
+extern __inline__ void iommu_invalidate_page(struct iommu_regs *regs, unsigned long ba)
+{
+ regs->pageflush = (ba & PAGE_MASK);
+}
+
+#endif /* !(_SPARC_IOMMU_H) */
diff --git a/include/asm-sparc/ipc.h b/include/asm-sparc/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-sparc/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-sparc/ipcbuf.h b/include/asm-sparc/ipcbuf.h
new file mode 100644
index 000000000000..9bef02d04e4b
--- /dev/null
+++ b/include/asm-sparc/ipcbuf.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC_IPCBUF_H
+#define _SPARC_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values (so that this structure matches
+ * sparc64 ipc64_perm)
+ */
+
+struct ipc64_perm
+{
+ __kernel_key_t key;
+ __kernel_uid32_t uid;
+ __kernel_gid32_t gid;
+ __kernel_uid32_t cuid;
+ __kernel_gid32_t cgid;
+ unsigned short __pad1;
+ __kernel_mode_t mode;
+ unsigned short __pad2;
+ unsigned short seq;
+ unsigned long long __unused1;
+ unsigned long long __unused2;
+};
+
+#endif /* _SPARC_IPCBUF_H */
diff --git a/include/asm-sparc/irq.h b/include/asm-sparc/irq.h
new file mode 100644
index 000000000000..cee356b0dae3
--- /dev/null
+++ b/include/asm-sparc/irq.h
@@ -0,0 +1,191 @@
+/* $Id: irq.h,v 1.32 2000/08/26 02:42:28 anton Exp $
+ * irq.h: IRQ registers on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_IRQ_H
+#define _SPARC_IRQ_H
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/threads.h> /* For NR_CPUS */
+#include <linux/interrupt.h>
+
+#include <asm/system.h> /* For SUN4M_NCPUS */
+#include <asm/btfixup.h>
+
+#define __irq_ino(irq) irq
+#define __irq_pil(irq) irq
+BTFIXUPDEF_CALL(char *, __irq_itoa, unsigned int)
+#define __irq_itoa(irq) BTFIXUP_CALL(__irq_itoa)(irq)
+
+#define NR_IRQS 16
+
+#define irq_canonicalize(irq) (irq)
+
+/* Dave Redman (djhr@tadpole.co.uk)
+ * changed these to function pointers.. it saves cycles and will allow
+ * the irq dependencies to be split into different files at a later date
+ * sun4c_irq.c, sun4m_irq.c etc so we could reduce the kernel size.
+ * Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ * Changed these to btfixup entities... It saves cycles :)
+ */
+BTFIXUPDEF_CALL(void, disable_irq, unsigned int)
+BTFIXUPDEF_CALL(void, enable_irq, unsigned int)
+BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int)
+BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int)
+BTFIXUPDEF_CALL(void, clear_clock_irq, void)
+BTFIXUPDEF_CALL(void, clear_profile_irq, int)
+BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int)
+
+static inline void disable_irq_nosync(unsigned int irq)
+{
+ BTFIXUP_CALL(disable_irq)(irq);
+}
+
+static inline void disable_irq(unsigned int irq)
+{
+ BTFIXUP_CALL(disable_irq)(irq);
+}
+
+static inline void enable_irq(unsigned int irq)
+{
+ BTFIXUP_CALL(enable_irq)(irq);
+}
+
+static inline void disable_pil_irq(unsigned int irq)
+{
+ BTFIXUP_CALL(disable_pil_irq)(irq);
+}
+
+static inline void enable_pil_irq(unsigned int irq)
+{
+ BTFIXUP_CALL(enable_pil_irq)(irq);
+}
+
+static inline void clear_clock_irq(void)
+{
+ BTFIXUP_CALL(clear_clock_irq)();
+}
+
+static inline void clear_profile_irq(int irq)
+{
+ BTFIXUP_CALL(clear_profile_irq)(irq);
+}
+
+static inline void load_profile_irq(int cpu, int limit)
+{
+ BTFIXUP_CALL(load_profile_irq)(cpu, limit);
+}
+
+extern void (*sparc_init_timers)(irqreturn_t (*lvl10_irq)(int, void *, struct pt_regs *));
+extern void claim_ticker14(irqreturn_t (*irq_handler)(int, void *, struct pt_regs *),
+ int irq,
+ unsigned int timeout);
+
+#ifdef CONFIG_SMP
+BTFIXUPDEF_CALL(void, set_cpu_int, int, int)
+BTFIXUPDEF_CALL(void, clear_cpu_int, int, int)
+BTFIXUPDEF_CALL(void, set_irq_udt, int)
+
+#define set_cpu_int(cpu,level) BTFIXUP_CALL(set_cpu_int)(cpu,level)
+#define clear_cpu_int(cpu,level) BTFIXUP_CALL(clear_cpu_int)(cpu,level)
+#define set_irq_udt(cpu) BTFIXUP_CALL(set_irq_udt)(cpu)
+#endif
+
+extern int request_fast_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long flags, __const__ char *devname);
+
+/* On the sun4m, just like the timers, we have both per-cpu and master
+ * interrupt registers.
+ */
+
+/* These registers are used for sending/receiving irqs from/to
+ * different cpu's.
+ */
+struct sun4m_intreg_percpu {
+ unsigned int tbt; /* Interrupts still pending for this cpu. */
+
+ /* These next two registers are WRITE-ONLY and are only
+ * "on bit" sensitive, "off bits" written have NO affect.
+ */
+ unsigned int clear; /* Clear this cpus irqs here. */
+ unsigned int set; /* Set this cpus irqs here. */
+ unsigned char space[PAGE_SIZE - 12];
+};
+
+/*
+ * djhr
+ * Actually the clear and set fields in this struct are misleading..
+ * according to the SLAVIO manual (and the same applies for the SEC)
+ * the clear field clears bits in the mask which will ENABLE that IRQ
+ * the set field sets bits in the mask to DISABLE the IRQ.
+ *
+ * Also the undirected_xx address in the SLAVIO is defined as
+ * RESERVED and write only..
+ *
+ * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor
+ * sun4m machines, for MP the layout makes more sense.
+ */
+struct sun4m_intregs {
+ struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS];
+ unsigned int tbt; /* IRQ's that are still pending. */
+ unsigned int irqs; /* Master IRQ bits. */
+
+ /* Again, like the above, two these registers are WRITE-ONLY. */
+ unsigned int clear; /* Clear master IRQ's by setting bits here. */
+ unsigned int set; /* Set master IRQ's by setting bits here. */
+
+ /* This register is both READ and WRITE. */
+ unsigned int undirected_target; /* Which cpu gets undirected irqs. */
+};
+
+extern struct sun4m_intregs *sun4m_interrupts;
+
+/*
+ * Bit field defines for the interrupt registers on various
+ * Sparc machines.
+ */
+
+/* The sun4c interrupt register. */
+#define SUN4C_INT_ENABLE 0x01 /* Allow interrupts. */
+#define SUN4C_INT_E14 0x80 /* Enable level 14 IRQ. */
+#define SUN4C_INT_E10 0x20 /* Enable level 10 IRQ. */
+#define SUN4C_INT_E8 0x10 /* Enable level 8 IRQ. */
+#define SUN4C_INT_E6 0x08 /* Enable level 6 IRQ. */
+#define SUN4C_INT_E4 0x04 /* Enable level 4 IRQ. */
+#define SUN4C_INT_E1 0x02 /* Enable level 1 IRQ. */
+
+/* Dave Redman (djhr@tadpole.co.uk)
+ * The sun4m interrupt registers.
+ */
+#define SUN4M_INT_ENABLE 0x80000000
+#define SUN4M_INT_E14 0x00000080
+#define SUN4M_INT_E10 0x00080000
+
+#define SUN4M_HARD_INT(x) (0x000000001 << (x))
+#define SUN4M_SOFT_INT(x) (0x000010000 << (x))
+
+#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */
+#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */
+#define SUN4M_INT_M2S_WRITE 0x20000000 /* write buffer error */
+#define SUN4M_INT_ECC 0x10000000 /* ecc memory error */
+#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */
+#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */
+#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */
+#define SUN4M_INT_REALTIME 0x00080000 /* system timer */
+#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */
+#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */
+#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */
+#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */
+#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */
+#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */
+
+#define SUN4M_INT_SBUS(x) (1 << (x+7))
+#define SUN4M_INT_VME(x) (1 << (x))
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif
diff --git a/include/asm-sparc/jsflash.h b/include/asm-sparc/jsflash.h
new file mode 100644
index 000000000000..3457f29bd73b
--- /dev/null
+++ b/include/asm-sparc/jsflash.h
@@ -0,0 +1,39 @@
+/*
+ * jsflash.h: OS Flash SIMM support for JavaStations.
+ *
+ * Copyright (C) 1999 Pete Zaitcev
+ */
+
+#ifndef _SPARC_JSFLASH_H
+#define _SPARC_JSFLASH_H
+
+#ifndef _SPARC_TYPES_H
+#include <asm/types.h>
+#endif
+
+/*
+ * Semantics of the offset is a full address.
+ * Hardcode it or get it from probe ioctl.
+ *
+ * We use full bus address, so that we would be
+ * automatically compatible with possible future systems.
+ */
+
+#define JSFLASH_IDENT (('F'<<8)|54)
+struct jsflash_ident_arg {
+ __u64 off; /* 0x20000000 is included */
+ __u32 size;
+ char name[32]; /* With trailing zero */
+};
+
+#define JSFLASH_ERASE (('F'<<8)|55)
+/* Put 0 as argument, may be flags or sector number... */
+
+#define JSFLASH_PROGRAM (('F'<<8)|56)
+struct jsflash_program_arg {
+ __u64 data; /* char* for sparc and sparc64 */
+ __u64 off;
+ __u32 size;
+};
+
+#endif /* _SPARC_JSFLASH_H */
diff --git a/include/asm-sparc/kbio.h b/include/asm-sparc/kbio.h
new file mode 100644
index 000000000000..3cf496bdf399
--- /dev/null
+++ b/include/asm-sparc/kbio.h
@@ -0,0 +1,56 @@
+#ifndef __LINUX_KBIO_H
+#define __LINUX_KBIO_H
+
+/* Return keyboard type */
+#define KIOCTYPE _IOR('k', 9, int)
+/* Return Keyboard layout */
+#define KIOCLAYOUT _IOR('k', 20, int)
+
+enum {
+ TR_NONE,
+ TR_ASCII, /* keyboard is in regular state */
+ TR_EVENT, /* keystrokes sent as firm events */
+ TR_UNTRANS_EVENT /* EVENT+up and down+no translation */
+};
+
+/* Return the current keyboard translation */
+#define KIOCGTRANS _IOR('k', 5, int)
+/* Set the keyboard translation */
+#define KIOCTRANS _IOW('k', 0, int)
+
+/* Send a keyboard command */
+#define KIOCCMD _IOW('k', 8, int)
+
+/* Return if keystrokes are being sent to /dev/kbd */
+
+/* Set routing of keystrokes to /dev/kbd */
+#define KIOCSDIRECT _IOW('k', 10, int)
+
+/* Set keyboard leds */
+#define KIOCSLED _IOW('k', 14, unsigned char)
+
+/* Get keyboard leds */
+#define KIOCGLED _IOR('k', 15, unsigned char)
+
+/* Used by KIOC[GS]RATE */
+struct kbd_rate {
+ unsigned char delay; /* Delay in Hz before first repeat. */
+ unsigned char rate; /* In characters per second (0..50). */
+};
+
+/* Set keyboard rate */
+#define KIOCSRATE _IOW('k', 40, struct kbd_rate)
+
+/* Get keyboard rate */
+#define KIOCGRATE _IOW('k', 41, struct kbd_rate)
+
+/* Top bit records if the key is up or down */
+#define KBD_UP 0x80
+
+/* Usable information */
+#define KBD_KEYMASK 0x7f
+
+/* All keys up */
+#define KBD_IDLE 0x75
+
+#endif /* __LINUX_KBIO_H */
diff --git a/include/asm-sparc/kdebug.h b/include/asm-sparc/kdebug.h
new file mode 100644
index 000000000000..3ea4916635ee
--- /dev/null
+++ b/include/asm-sparc/kdebug.h
@@ -0,0 +1,69 @@
+/* $Id: kdebug.h,v 1.11 2000/06/04 06:23:53 anton Exp $
+ * kdebug.h: Defines and definitions for debugging the Linux kernel
+ * under various kernel debuggers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_KDEBUG_H
+#define _SPARC_KDEBUG_H
+
+#include <asm/openprom.h>
+#include <asm/vaddrs.h>
+
+/* Breakpoints are enter through trap table entry 126. So in sparc assembly
+ * if you want to drop into the debugger you do:
+ *
+ * t DEBUG_BP_TRAP
+ */
+
+#define DEBUG_BP_TRAP 126
+
+#ifndef __ASSEMBLY__
+/* The debug vector is passed in %o1 at boot time. It is a pointer to
+ * a structure in the debuggers address space. Here is its format.
+ */
+
+typedef unsigned int (*debugger_funct)(void);
+
+struct kernel_debug {
+ /* First the entry point into the debugger. You jump here
+ * to give control over to the debugger.
+ */
+ unsigned long kdebug_entry;
+ unsigned long kdebug_trapme; /* Figure out later... */
+ /* The following is the number of pages that the debugger has
+ * taken from to total pool.
+ */
+ unsigned long *kdebug_stolen_pages;
+ /* Ok, after you remap yourself and/or change the trap table
+ * from what you were left with at boot time you have to call
+ * this synchronization function so the debugger can check out
+ * what you have done.
+ */
+ debugger_funct teach_debugger;
+}; /* I think that is it... */
+
+extern struct kernel_debug *linux_dbvec;
+
+/* Use this macro in C-code to enter the debugger. */
+extern __inline__ void sp_enter_debugger(void)
+{
+ __asm__ __volatile__("jmpl %0, %%o7\n\t"
+ "nop\n\t" : :
+ "r" (linux_dbvec) : "o7", "memory");
+}
+
+#define SP_ENTER_DEBUGGER do { \
+ if((linux_dbvec!=0) && ((*(short *)linux_dbvec)!=-1)) \
+ sp_enter_debugger(); \
+ } while(0)
+
+#endif /* !(__ASSEMBLY__) */
+
+/* Some nice offset defines for assembler code. */
+#define KDEBUG_ENTRY_OFF 0x0
+#define KDEBUG_DUNNO_OFF 0x4
+#define KDEBUG_DUNNO2_OFF 0x8
+#define KDEBUG_TEACH_OFF 0xc
+
+#endif /* !(_SPARC_KDEBUG_H) */
diff --git a/include/asm-sparc/kgdb.h b/include/asm-sparc/kgdb.h
new file mode 100644
index 000000000000..d120adfb429f
--- /dev/null
+++ b/include/asm-sparc/kgdb.h
@@ -0,0 +1,94 @@
+/* $Id: kgdb.h,v 1.8 1998/01/07 06:33:44 baccala Exp $
+ * kgdb.h: Defines and declarations for serial line source level
+ * remote debugging of the Linux kernel using gdb.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_KGDB_H
+#define _SPARC_KGDB_H
+
+#ifndef __ASSEMBLY__
+/* To init the kgdb engine. */
+extern void set_debug_traps(void);
+
+/* To enter the debugger explicitly. */
+extern void breakpoint(void);
+
+/* For convenience we define the format of a kgdb trap breakpoint
+ * frame here also.
+ */
+struct kgdb_frame {
+ unsigned long globals[8];
+ unsigned long outs[8];
+ unsigned long locals[8];
+ unsigned long ins[8];
+ unsigned long fpregs[32];
+ unsigned long y;
+ unsigned long psr;
+ unsigned long wim;
+ unsigned long tbr;
+ unsigned long pc;
+ unsigned long npc;
+ unsigned long fpsr;
+ unsigned long cpsr;
+};
+#endif /* !(__ASSEMBLY__) */
+
+/* Macros for assembly usage of the kgdb breakpoint frame. */
+#define KGDB_G0 0x000
+#define KGDB_G1 0x004
+#define KGDB_G2 0x008
+#define KGDB_G4 0x010
+#define KGDB_G6 0x018
+#define KGDB_I0 0x020
+#define KGDB_I2 0x028
+#define KGDB_I4 0x030
+#define KGDB_I6 0x038
+#define KGDB_Y 0x100
+#define KGDB_PSR 0x104
+#define KGDB_WIM 0x108
+#define KGDB_TBR 0x10c
+#define KGDB_PC 0x110
+#define KGDB_NPC 0x114
+
+#define SAVE_KGDB_GLOBALS(reg) \
+ std %g0, [%reg + STACKFRAME_SZ + KGDB_G0]; \
+ std %g2, [%reg + STACKFRAME_SZ + KGDB_G2]; \
+ std %g4, [%reg + STACKFRAME_SZ + KGDB_G4]; \
+ std %g6, [%reg + STACKFRAME_SZ + KGDB_G6];
+
+#define SAVE_KGDB_INS(reg) \
+ std %i0, [%reg + STACKFRAME_SZ + KGDB_I0]; \
+ std %i2, [%reg + STACKFRAME_SZ + KGDB_I2]; \
+ std %i4, [%reg + STACKFRAME_SZ + KGDB_I4]; \
+ std %i6, [%reg + STACKFRAME_SZ + KGDB_I6];
+
+#define SAVE_KGDB_SREGS(reg, reg_y, reg_psr, reg_wim, reg_tbr, reg_pc, reg_npc) \
+ st %reg_y, [%reg + STACKFRAME_SZ + KGDB_Y]; \
+ st %reg_psr, [%reg + STACKFRAME_SZ + KGDB_PSR]; \
+ st %reg_wim, [%reg + STACKFRAME_SZ + KGDB_WIM]; \
+ st %reg_tbr, [%reg + STACKFRAME_SZ + KGDB_TBR]; \
+ st %reg_pc, [%reg + STACKFRAME_SZ + KGDB_PC]; \
+ st %reg_npc, [%reg + STACKFRAME_SZ + KGDB_NPC];
+
+#define LOAD_KGDB_GLOBALS(reg) \
+ ld [%reg + STACKFRAME_SZ + KGDB_G1], %g1; \
+ ldd [%reg + STACKFRAME_SZ + KGDB_G2], %g2; \
+ ldd [%reg + STACKFRAME_SZ + KGDB_G4], %g4; \
+ ldd [%reg + STACKFRAME_SZ + KGDB_G6], %g6;
+
+#define LOAD_KGDB_INS(reg) \
+ ldd [%reg + STACKFRAME_SZ + KGDB_I0], %i0; \
+ ldd [%reg + STACKFRAME_SZ + KGDB_I2], %i2; \
+ ldd [%reg + STACKFRAME_SZ + KGDB_I4], %i4; \
+ ldd [%reg + STACKFRAME_SZ + KGDB_I6], %i6;
+
+#define LOAD_KGDB_SREGS(reg, reg_y, reg_psr, reg_wim, reg_tbr, reg_pc, reg_npc) \
+ ld [%reg + STACKFRAME_SZ + KGDB_Y], %reg_y; \
+ ld [%reg + STACKFRAME_SZ + KGDB_PSR], %reg_psr; \
+ ld [%reg + STACKFRAME_SZ + KGDB_WIM], %reg_wim; \
+ ld [%reg + STACKFRAME_SZ + KGDB_TBR], %reg_tbr; \
+ ld [%reg + STACKFRAME_SZ + KGDB_PC], %reg_pc; \
+ ld [%reg + STACKFRAME_SZ + KGDB_NPC], %reg_npc;
+
+#endif /* !(_SPARC_KGDB_H) */
diff --git a/include/asm-sparc/kmap_types.h b/include/asm-sparc/kmap_types.h
new file mode 100644
index 000000000000..e215f7104974
--- /dev/null
+++ b/include/asm-sparc/kmap_types.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_TYPE_NR
+};
+
+#endif
diff --git a/include/asm-sparc/linkage.h b/include/asm-sparc/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/include/asm-sparc/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/include/asm-sparc/local.h b/include/asm-sparc/local.h
new file mode 100644
index 000000000000..bc80815a435c
--- /dev/null
+++ b/include/asm-sparc/local.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_LOCAL_H
+#define _SPARC_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif
diff --git a/include/asm-sparc/machines.h b/include/asm-sparc/machines.h
new file mode 100644
index 000000000000..d831350f5428
--- /dev/null
+++ b/include/asm-sparc/machines.h
@@ -0,0 +1,69 @@
+/* $Id: machines.h,v 1.4 1995/11/25 02:31:58 davem Exp $
+ * machines.h: Defines for taking apart the machine type value in the
+ * idprom and determining the kind of machine we are on.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_MACHINES_H
+#define _SPARC_MACHINES_H
+
+struct Sun_Machine_Models {
+ char *name;
+ unsigned char id_machtype;
+};
+
+/* Current number of machines we know about that has an IDPROM
+ * machtype entry including one entry for the 0x80 OBP machines.
+ */
+#define NUM_SUN_MACHINES 15
+
+extern struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES];
+
+/* The machine type in the idprom area looks like this:
+ *
+ * ---------------
+ * | ARCH | MACH |
+ * ---------------
+ * 7 4 3 0
+ *
+ * The ARCH field determines the architecture line (sun4, sun4c, etc).
+ * The MACH field determines the machine make within that architecture.
+ */
+
+#define SM_ARCH_MASK 0xf0
+#define SM_SUN4 0x20
+#define SM_SUN4C 0x50
+#define SM_SUN4M 0x70
+#define SM_SUN4M_OBP 0x80
+
+#define SM_TYP_MASK 0x0f
+/* Sun4 machines */
+#define SM_4_260 0x01 /* Sun 4/200 series */
+#define SM_4_110 0x02 /* Sun 4/100 series */
+#define SM_4_330 0x03 /* Sun 4/300 series */
+#define SM_4_470 0x04 /* Sun 4/400 series */
+
+/* Sun4c machines Full Name - PROM NAME */
+#define SM_4C_SS1 0x01 /* Sun4c SparcStation 1 - Sun 4/60 */
+#define SM_4C_IPC 0x02 /* Sun4c SparcStation IPC - Sun 4/40 */
+#define SM_4C_SS1PLUS 0x03 /* Sun4c SparcStation 1+ - Sun 4/65 */
+#define SM_4C_SLC 0x04 /* Sun4c SparcStation SLC - Sun 4/20 */
+#define SM_4C_SS2 0x05 /* Sun4c SparcStation 2 - Sun 4/75 */
+#define SM_4C_ELC 0x06 /* Sun4c SparcStation ELC - Sun 4/25 */
+#define SM_4C_IPX 0x07 /* Sun4c SparcStation IPX - Sun 4/50 */
+
+/* Sun4m machines, these predate the OpenBoot. These values only mean
+ * something if the value in the ARCH field is SM_SUN4M, if it is
+ * SM_SUN4M_OBP then you have the following situation:
+ * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
+ * 2) You have to consult OpenBoot to determine which machine this is.
+ */
+#define SM_4M_SS60 0x01 /* Sun4m SparcSystem 600 */
+#define SM_4M_SS50 0x02 /* Sun4m SparcStation 10 */
+#define SM_4M_SS40 0x03 /* Sun4m SparcStation 5 */
+
+/* Sun4d machines -- N/A */
+/* Sun4e machines -- N/A */
+/* Sun4u machines -- N/A */
+
+#endif /* !(_SPARC_MACHINES_H) */
diff --git a/include/asm-sparc/mbus.h b/include/asm-sparc/mbus.h
new file mode 100644
index 000000000000..5f2749015342
--- /dev/null
+++ b/include/asm-sparc/mbus.h
@@ -0,0 +1,102 @@
+/* $Id: mbus.h,v 1.9 1997/06/24 15:48:12 jj Exp $
+ * mbus.h: Various defines for MBUS modules.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MBUS_H
+#define _SPARC_MBUS_H
+
+#include <asm/ross.h> /* HyperSparc stuff */
+#include <asm/cypress.h> /* Cypress Chips */
+#include <asm/viking.h> /* Ugh, bug city... */
+
+enum mbus_module {
+ HyperSparc = 0,
+ Cypress = 1,
+ Cypress_vE = 2,
+ Cypress_vD = 3,
+ Swift_ok = 4,
+ Swift_bad_c = 5,
+ Swift_lots_o_bugs = 6,
+ Tsunami = 7,
+ Viking_12 = 8,
+ Viking_2x = 9,
+ Viking_30 = 10,
+ Viking_35 = 11,
+ Viking_new = 12,
+ TurboSparc = 13,
+ SRMMU_INVAL_MOD = 14,
+};
+
+extern enum mbus_module srmmu_modtype;
+extern unsigned int viking_rev, swift_rev, cypress_rev;
+
+/* HW Mbus module bugs we have to deal with */
+#define HWBUG_COPYBACK_BROKEN 0x00000001
+#define HWBUG_ASIFLUSH_BROKEN 0x00000002
+#define HWBUG_VACFLUSH_BITROT 0x00000004
+#define HWBUG_KERN_ACCBROKEN 0x00000008
+#define HWBUG_KERN_CBITBROKEN 0x00000010
+#define HWBUG_MODIFIED_BITROT 0x00000020
+#define HWBUG_PC_BADFAULT_ADDR 0x00000040
+#define HWBUG_SUPERSCALAR_BAD 0x00000080
+#define HWBUG_PACINIT_BITROT 0x00000100
+
+extern unsigned int hwbug_bitmask;
+
+/* First the module type values. To find out which you have, just load
+ * the mmu control register from ASI_M_MMUREG alternate address space and
+ * shift the value right 28 bits.
+ */
+/* IMPL field means the company which produced the chip. */
+#define MBUS_VIKING 0x4 /* bleech, Texas Instruments Module */
+#define MBUS_LSI 0x3 /* LSI Logics */
+#define MBUS_ROSS 0x1 /* Ross is nice */
+#define MBUS_FMI 0x0 /* Fujitsu Microelectronics/Swift */
+
+/* Ross Module versions */
+#define ROSS_604_REV_CDE 0x0 /* revisions c, d, and e */
+#define ROSS_604_REV_F 0x1 /* revision f */
+#define ROSS_605 0xf /* revision a, a.1, and a.2 */
+#define ROSS_605_REV_B 0xe /* revision b */
+
+/* TI Viking Module versions */
+#define VIKING_REV_12 0x1 /* Version 1.2 or SPARCclassic's CPU */
+#define VIKING_REV_2 0x2 /* Version 2.1, 2.2, 2.3, and 2.4 */
+#define VIKING_REV_30 0x3 /* Version 3.0 */
+#define VIKING_REV_35 0x4 /* Version 3.5 */
+
+/* LSI Logics. */
+#define LSI_L64815 0x0
+
+/* Fujitsu */
+#define FMI_AURORA 0x4 /* MB8690x, a Swift module... */
+#define FMI_TURBO 0x5 /* MB86907, a TurboSparc module... */
+
+/* For multiprocessor support we need to be able to obtain the CPU id and
+ * the MBUS Module id.
+ */
+
+/* The CPU ID is encoded in the trap base register, 20 bits to the left of
+ * bit zero, with 2 bits being significant.
+ */
+#define TBR_ID_SHIFT 20
+
+extern __inline__ int get_cpuid(void)
+{
+ register int retval;
+ __asm__ __volatile__("rd %%tbr, %0\n\t"
+ "srl %0, %1, %0\n\t" :
+ "=r" (retval) :
+ "i" (TBR_ID_SHIFT));
+ return (retval & 3);
+}
+
+extern __inline__ int get_modid(void)
+{
+ return (get_cpuid() | 0x8);
+}
+
+
+#endif /* !(_SPARC_MBUS_H) */
diff --git a/include/asm-sparc/mc146818rtc.h b/include/asm-sparc/mc146818rtc.h
new file mode 100644
index 000000000000..fa7eac926582
--- /dev/null
+++ b/include/asm-sparc/mc146818rtc.h
@@ -0,0 +1,29 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_SPARC_MC146818RTC_H
+#define __ASM_SPARC_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x) (0x70 + (x))
+#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* __ASM_SPARC_MC146818RTC_H */
diff --git a/include/asm-sparc/memreg.h b/include/asm-sparc/memreg.h
new file mode 100644
index 000000000000..c0498d3baf93
--- /dev/null
+++ b/include/asm-sparc/memreg.h
@@ -0,0 +1,52 @@
+/* $Id: memreg.h,v 1.8 1996/08/29 09:48:23 davem Exp $ */
+#ifndef _SPARC_MEMREG_H
+#define _SPARC_MEMREG_H
+/* memreg.h: Definitions of the values found in the synchronous
+ * and asynchronous memory error registers when a fault
+ * occurs on the sun4c.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* First the synchronous error codes, these are usually just
+ * normal page faults.
+ */
+
+#define SUN4C_SYNC_WDRESET 0x0001 /* watchdog reset */
+#define SUN4C_SYNC_SIZE 0x0002 /* bad access size? whuz this? */
+#define SUN4C_SYNC_PARITY 0x0008 /* bad ram chips caused a parity error */
+#define SUN4C_SYNC_SBUS 0x0010 /* the SBUS had some problems... */
+#define SUN4C_SYNC_NOMEM 0x0020 /* translation to non-existent ram */
+#define SUN4C_SYNC_PROT 0x0040 /* access violated pte protections */
+#define SUN4C_SYNC_NPRESENT 0x0080 /* pte said that page was not present */
+#define SUN4C_SYNC_BADWRITE 0x8000 /* while writing something went bogus */
+
+#define SUN4C_SYNC_BOLIXED \
+ (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \
+ SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY)
+
+/* Now the asynchronous error codes, these are almost always produced
+ * by the cache writing things back to memory and getting a bad translation.
+ * Bad DVMA transactions can cause these faults too.
+ */
+
+#define SUN4C_ASYNC_BADDVMA 0x0010 /* error during DVMA access */
+#define SUN4C_ASYNC_NOMEM 0x0020 /* write back pointed to bad phys addr */
+#define SUN4C_ASYNC_BADWB 0x0080 /* write back points to non-present page */
+
+/* Memory parity error register with associated bit constants. */
+#ifndef __ASSEMBLY__
+extern __volatile__ unsigned long *sun4c_memerr_reg;
+#endif
+
+#define SUN4C_MPE_ERROR 0x80 /* Parity error detected. (ro) */
+#define SUN4C_MPE_MULTI 0x40 /* Multiple parity errors detected. (ro) */
+#define SUN4C_MPE_TEST 0x20 /* Write inverse parity. (rw) */
+#define SUN4C_MPE_CHECK 0x10 /* Enable parity checking. (rw) */
+#define SUN4C_MPE_ERR00 0x08 /* Parity error in bits 0-7. (ro) */
+#define SUN4C_MPE_ERR08 0x04 /* Parity error in bits 8-15. (ro) */
+#define SUN4C_MPE_ERR16 0x02 /* Parity error in bits 16-23. (ro) */
+#define SUN4C_MPE_ERR24 0x01 /* Parity error in bits 24-31. (ro) */
+#define SUN4C_MPE_ERRS 0x0F /* Bit mask for the error bits. (ro) */
+
+#endif /* !(_SPARC_MEMREG_H) */
diff --git a/include/asm-sparc/mman.h b/include/asm-sparc/mman.h
new file mode 100644
index 000000000000..138eb81dd70d
--- /dev/null
+++ b/include/asm-sparc/mman.h
@@ -0,0 +1,62 @@
+/* $Id: mman.h,v 1.9 2000/03/15 02:44:23 davem Exp $ */
+#ifndef __SPARC_MMAN_H__
+#define __SPARC_MMAN_H__
+
+/* SunOS'ified... */
+
+#define PROT_READ 0x1 /* page can be read */
+#define PROT_WRITE 0x2 /* page can be written */
+#define PROT_EXEC 0x4 /* page can be executed */
+#define PROT_SEM 0x8 /* page may be used for atomic ops */
+#define PROT_NONE 0x0 /* page can not be accessed */
+#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED 0x01 /* Share changes */
+#define MAP_PRIVATE 0x02 /* Changes are private */
+#define MAP_TYPE 0x0f /* Mask for type of mapping */
+#define MAP_FIXED 0x10 /* Interpret addr exactly */
+#define MAP_ANONYMOUS 0x20 /* don't use a file */
+#define MAP_RENAME MAP_ANONYMOUS /* In SunOS terminology */
+#define MAP_NORESERVE 0x40 /* don't reserve swap pages */
+#define MAP_INHERIT 0x80 /* SunOS doesn't do this, but... */
+#define MAP_LOCKED 0x100 /* lock the mapping */
+#define _MAP_NEW 0x80000000 /* Binary compatibility is fun... */
+
+#define MAP_GROWSDOWN 0x0200 /* stack-like segment */
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+
+#define MS_ASYNC 1 /* sync memory asynchronously */
+#define MS_INVALIDATE 2 /* invalidate the caches */
+#define MS_SYNC 4 /* synchronous memory sync */
+
+#define MCL_CURRENT 0x2000 /* lock all currently mapped pages */
+#define MCL_FUTURE 0x4000 /* lock all additions to address space */
+
+#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+
+/* XXX Need to add flags to SunOS's mctl, mlockall, and madvise system
+ * XXX calls.
+ */
+
+/* SunOS sys_mctl() stuff... */
+#define MC_SYNC 1 /* Sync pages in memory with storage (usu. a file) */
+#define MC_LOCK 2 /* Lock pages into core ram, do not allow swapping of them */
+#define MC_UNLOCK 3 /* Unlock pages locked via previous mctl() with MC_LOCK arg */
+#define MC_LOCKAS 5 /* Lock an entire address space of the calling process */
+#define MC_UNLOCKAS 6 /* Unlock entire address space of calling process */
+
+#define MADV_NORMAL 0x0 /* default page-in behavior */
+#define MADV_RANDOM 0x1 /* page-in minimum required */
+#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
+#define MADV_WILLNEED 0x3 /* pre-fault pages */
+#define MADV_DONTNEED 0x4 /* discard these pages */
+#define MADV_FREE 0x5 /* (Solaris) contents can be freed */
+
+/* compatibility flags */
+#define MAP_ANON MAP_ANONYMOUS
+#define MAP_FILE 0
+
+#endif /* __SPARC_MMAN_H__ */
diff --git a/include/asm-sparc/mmu.h b/include/asm-sparc/mmu.h
new file mode 100644
index 000000000000..ccd36d26615a
--- /dev/null
+++ b/include/asm-sparc/mmu.h
@@ -0,0 +1,7 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#endif
diff --git a/include/asm-sparc/mmu_context.h b/include/asm-sparc/mmu_context.h
new file mode 100644
index 000000000000..ed1e01d04d21
--- /dev/null
+++ b/include/asm-sparc/mmu_context.h
@@ -0,0 +1,40 @@
+#ifndef __SPARC_MMU_CONTEXT_H
+#define __SPARC_MMU_CONTEXT_H
+
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * Initialize a new mmu context. This is invoked when a new
+ * address space instance (unique or shared) is instantiated.
+ */
+#define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * Destroy a dead context. This occurs when mmput drops the
+ * mm_users count to zero, the mmaps have been released, and
+ * all the page tables have been flushed. Our job is to destroy
+ * any remaining processor-specific state.
+ */
+BTFIXUPDEF_CALL(void, destroy_context, struct mm_struct *)
+
+#define destroy_context(mm) BTFIXUP_CALL(destroy_context)(mm)
+
+/* Switch the current MM context. */
+BTFIXUPDEF_CALL(void, switch_mm, struct mm_struct *, struct mm_struct *, struct task_struct *)
+
+#define switch_mm(old_mm, mm, tsk) BTFIXUP_CALL(switch_mm)(old_mm, mm, tsk)
+
+#define deactivate_mm(tsk,mm) do { } while (0)
+
+/* Activate a new MM instance for the current task. */
+#define activate_mm(active_mm, mm) switch_mm((active_mm), (mm), NULL)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_MMU_CONTEXT_H) */
diff --git a/include/asm-sparc/module.h b/include/asm-sparc/module.h
new file mode 100644
index 000000000000..cbd9e67b0c0b
--- /dev/null
+++ b/include/asm-sparc/module.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SPARC_MODULE_H
+#define _ASM_SPARC_MODULE_H
+struct mod_arch_specific { };
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#endif /* _ASM_SPARC_MODULE_H */
diff --git a/include/asm-sparc/mostek.h b/include/asm-sparc/mostek.h
new file mode 100644
index 000000000000..59b86bc793bf
--- /dev/null
+++ b/include/asm-sparc/mostek.h
@@ -0,0 +1,174 @@
+/* $Id: mostek.h,v 1.13 2001/01/11 15:07:09 davem Exp $
+ * mostek.h: Describes the various Mostek time of day clock registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ * Added intersil code 05/25/98 Chris Davis (cdavis@cois.on.ca)
+ */
+
+#ifndef _SPARC_MOSTEK_H
+#define _SPARC_MOSTEK_H
+
+#include <linux/config.h>
+#include <asm/idprom.h>
+#include <asm/io.h>
+
+/* M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
+ *
+ * Data
+ * Address Function
+ * Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
+ * 7ff - - - - - - - - Year 00-99
+ * 7fe 0 0 0 - - - - - Month 01-12
+ * 7fd 0 0 - - - - - - Date 01-31
+ * 7fc 0 FT 0 0 0 - - - Day 01-07
+ * 7fb KS 0 - - - - - - Hours 00-23
+ * 7fa 0 - - - - - - - Minutes 00-59
+ * 7f9 ST - - - - - - - Seconds 00-59
+ * 7f8 W R S - - - - - Control
+ *
+ * * ST is STOP BIT
+ * * W is WRITE BIT
+ * * R is READ BIT
+ * * S is SIGN BIT
+ * * FT is FREQ TEST BIT
+ * * KS is KICK START BIT
+ */
+
+/* The Mostek 48t02 real time clock and NVRAM chip. The registers
+ * other than the control register are in binary coded decimal. Some
+ * control bits also live outside the control register.
+ */
+#define mostek_read(_addr) readb(_addr)
+#define mostek_write(_addr,_val) writeb(_val, _addr)
+#define MOSTEK_EEPROM 0x0000UL
+#define MOSTEK_IDPROM 0x07d8UL
+#define MOSTEK_CREG 0x07f8UL
+#define MOSTEK_SEC 0x07f9UL
+#define MOSTEK_MIN 0x07faUL
+#define MOSTEK_HOUR 0x07fbUL
+#define MOSTEK_DOW 0x07fcUL
+#define MOSTEK_DOM 0x07fdUL
+#define MOSTEK_MONTH 0x07feUL
+#define MOSTEK_YEAR 0x07ffUL
+
+struct mostek48t02 {
+ volatile char eeprom[2008]; /* This is the eeprom, don't touch! */
+ struct idprom idprom; /* The idprom lives here. */
+ volatile unsigned char creg; /* Control register */
+ volatile unsigned char sec; /* Seconds (0-59) */
+ volatile unsigned char min; /* Minutes (0-59) */
+ volatile unsigned char hour; /* Hour (0-23) */
+ volatile unsigned char dow; /* Day of the week (1-7) */
+ volatile unsigned char dom; /* Day of the month (1-31) */
+ volatile unsigned char month; /* Month of year (1-12) */
+ volatile unsigned char year; /* Year (0-99) */
+};
+
+extern spinlock_t mostek_lock;
+extern void __iomem *mstk48t02_regs;
+
+/* Control register values. */
+#define MSTK_CREG_WRITE 0x80 /* Must set this before placing values. */
+#define MSTK_CREG_READ 0x40 /* Stop updates to allow a clean read. */
+#define MSTK_CREG_SIGN 0x20 /* Slow/speed clock in calibration mode. */
+
+/* Control bits that live in the other registers. */
+#define MSTK_STOP 0x80 /* Stop the clock oscillator. (sec) */
+#define MSTK_KICK_START 0x80 /* Kick start the clock chip. (hour) */
+#define MSTK_FREQ_TEST 0x40 /* Frequency test mode. (day) */
+
+#define MSTK_YEAR_ZERO 1968 /* If year reg has zero, it is 1968. */
+#define MSTK_CVT_YEAR(yr) ((yr) + MSTK_YEAR_ZERO)
+
+/* Masks that define how much space each value takes up. */
+#define MSTK_SEC_MASK 0x7f
+#define MSTK_MIN_MASK 0x7f
+#define MSTK_HOUR_MASK 0x3f
+#define MSTK_DOW_MASK 0x07
+#define MSTK_DOM_MASK 0x3f
+#define MSTK_MONTH_MASK 0x1f
+#define MSTK_YEAR_MASK 0xff
+
+/* Binary coded decimal conversion macros. */
+#define MSTK_REGVAL_TO_DECIMAL(x) (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
+#define MSTK_DECIMAL_TO_REGVAL(x) ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
+
+/* Generic register set and get macros for internal use. */
+#define MSTK_GET(regs,var,mask) (MSTK_REGVAL_TO_DECIMAL(((struct mostek48t02 *)regs)->var & MSTK_ ## mask ## _MASK))
+#define MSTK_SET(regs,var,value,mask) do { ((struct mostek48t02 *)regs)->var &= ~(MSTK_ ## mask ## _MASK); ((struct mostek48t02 *)regs)->var |= MSTK_DECIMAL_TO_REGVAL(value) & (MSTK_ ## mask ## _MASK); } while (0)
+
+/* Macros to make register access easier on our fingers. These give you
+ * the decimal value of the register requested if applicable. You pass
+ * the a pointer to a 'struct mostek48t02'.
+ */
+#define MSTK_REG_CREG(regs) (((struct mostek48t02 *)regs)->creg)
+#define MSTK_REG_SEC(regs) MSTK_GET(regs,sec,SEC)
+#define MSTK_REG_MIN(regs) MSTK_GET(regs,min,MIN)
+#define MSTK_REG_HOUR(regs) MSTK_GET(regs,hour,HOUR)
+#define MSTK_REG_DOW(regs) MSTK_GET(regs,dow,DOW)
+#define MSTK_REG_DOM(regs) MSTK_GET(regs,dom,DOM)
+#define MSTK_REG_MONTH(regs) MSTK_GET(regs,month,MONTH)
+#define MSTK_REG_YEAR(regs) MSTK_GET(regs,year,YEAR)
+
+#define MSTK_SET_REG_SEC(regs,value) MSTK_SET(regs,sec,value,SEC)
+#define MSTK_SET_REG_MIN(regs,value) MSTK_SET(regs,min,value,MIN)
+#define MSTK_SET_REG_HOUR(regs,value) MSTK_SET(regs,hour,value,HOUR)
+#define MSTK_SET_REG_DOW(regs,value) MSTK_SET(regs,dow,value,DOW)
+#define MSTK_SET_REG_DOM(regs,value) MSTK_SET(regs,dom,value,DOM)
+#define MSTK_SET_REG_MONTH(regs,value) MSTK_SET(regs,month,value,MONTH)
+#define MSTK_SET_REG_YEAR(regs,value) MSTK_SET(regs,year,value,YEAR)
+
+
+/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
+ * same (basically) layout of the 48t02 chip except for the extra
+ * NVRAM on board (8 KB against the 48t02's 2 KB).
+ */
+struct mostek48t08 {
+ char offset[6*1024]; /* Magic things may be here, who knows? */
+ struct mostek48t02 regs; /* Here is what we are interested in. */
+};
+
+extern enum sparc_clock_type sp_clock_typ;
+
+#ifdef CONFIG_SUN4
+enum sparc_clock_type { MSTK48T02, MSTK48T08, \
+INTERSIL, MSTK_INVALID };
+#else
+enum sparc_clock_type { MSTK48T02, MSTK48T08, \
+MSTK_INVALID };
+#endif
+
+#ifdef CONFIG_SUN4
+/* intersil on a sun 4/260 code data from harris doc */
+struct intersil_dt {
+ volatile unsigned char int_csec;
+ volatile unsigned char int_hour;
+ volatile unsigned char int_min;
+ volatile unsigned char int_sec;
+ volatile unsigned char int_month;
+ volatile unsigned char int_day;
+ volatile unsigned char int_year;
+ volatile unsigned char int_dow;
+};
+
+struct intersil {
+ struct intersil_dt clk;
+ struct intersil_dt cmp;
+ volatile unsigned char int_intr_reg;
+ volatile unsigned char int_cmd_reg;
+};
+
+#define INTERSIL_STOP 0x0
+#define INTERSIL_START 0x8
+#define INTERSIL_INTR_DISABLE 0x0
+#define INTERSIL_INTR_ENABLE 0x10
+#define INTERSIL_32K 0x0
+#define INTERSIL_NORMAL 0x0
+#define INTERSIL_24H 0x4
+#define INTERSIL_INT_100HZ 0x2
+
+/* end of intersil info */
+#endif
+
+#endif /* !(_SPARC_MOSTEK_H) */
diff --git a/include/asm-sparc/mpmbox.h b/include/asm-sparc/mpmbox.h
new file mode 100644
index 000000000000..0e1bc5801d8a
--- /dev/null
+++ b/include/asm-sparc/mpmbox.h
@@ -0,0 +1,67 @@
+/* $Id: mpmbox.h,v 1.4 1996/04/25 06:13:19 davem Exp $
+ * mpmbox.h: Interface and defines for the OpenProm mailbox
+ * facilities for MP machines under Linux.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MPMBOX_H
+#define _SPARC_MPMBOX_H
+
+/* The prom allocates, for each CPU on the machine an unsigned
+ * byte in physical ram. You probe the device tree prom nodes
+ * for these values. The purpose of this byte is to be able to
+ * pass messages from one cpu to another.
+ */
+
+/* These are the main message types we have to look for in our
+ * Cpu mailboxes, based upon these values we decide what course
+ * of action to take.
+ */
+
+/* The CPU is executing code in the kernel. */
+#define MAILBOX_ISRUNNING 0xf0
+
+/* Another CPU called romvec->pv_exit(), you should call
+ * prom_stopcpu() when you see this in your mailbox.
+ */
+#define MAILBOX_EXIT 0xfb
+
+/* Another CPU called romvec->pv_enter(), you should call
+ * prom_cpuidle() when this is seen.
+ */
+#define MAILBOX_GOSPIN 0xfc
+
+/* Another CPU has hit a breakpoint either into kadb or the prom
+ * itself. Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
+ * at this point.
+ */
+#define MAILBOX_BPT_SPIN 0xfd
+
+/* Oh geese, some other nitwit got a damn watchdog reset. The party's
+ * over so go call prom_stopcpu().
+ */
+#define MAILBOX_WDOG_STOP 0xfe
+
+#ifndef __ASSEMBLY__
+
+/* Handy macro's to determine a cpu's state. */
+
+/* Is the cpu still in Power On Self Test? */
+#define MBOX_POST_P(letter) ((letter) >= 0x00 && (letter) <= 0x7f)
+
+/* Is the cpu at the 'ok' prompt of the PROM? */
+#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
+
+/* Is the cpu spinning in the PROM? */
+#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
+
+/* Sanity check... This is junk mail, throw it out. */
+#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
+
+/* Is the cpu actively running an application/kernel-code? */
+#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_MPMBOX_H) */
diff --git a/include/asm-sparc/msgbuf.h b/include/asm-sparc/msgbuf.h
new file mode 100644
index 000000000000..8cec9ad0b825
--- /dev/null
+++ b/include/asm-sparc/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC64_MSGBUF_H
+#define _SPARC64_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for sparc64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+ unsigned int __pad1;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned int __pad2;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned int __pad3;
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _SPARC64_MSGBUF_H */
diff --git a/include/asm-sparc/msi.h b/include/asm-sparc/msi.h
new file mode 100644
index 000000000000..b69543dd3b46
--- /dev/null
+++ b/include/asm-sparc/msi.h
@@ -0,0 +1,31 @@
+/* $Id: msi.h,v 1.3 1996/08/29 09:48:25 davem Exp $
+ * msi.h: Defines specific to the MBus - Sbus - Interface.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
+ */
+
+#ifndef _SPARC_MSI_H
+#define _SPARC_MSI_H
+
+/*
+ * Locations of MSI Registers.
+ */
+#define MSI_MBUS_ARBEN 0xe0001008 /* MBus Arbiter Enable register */
+
+/*
+ * Useful bits in the MSI Registers.
+ */
+#define MSI_ASYNC_MODE 0x80000000 /* Operate the MSI asynchronously */
+
+
+extern __inline__ void msi_set_sync(void)
+{
+ __asm__ __volatile__ ("lda [%0] %1, %%g3\n\t"
+ "andn %%g3, %2, %%g3\n\t"
+ "sta %%g3, [%0] %1\n\t" : :
+ "r" (MSI_MBUS_ARBEN),
+ "i" (ASI_M_CTL), "r" (MSI_ASYNC_MODE) : "g3");
+}
+
+#endif /* !(_SPARC_MSI_H) */
diff --git a/include/asm-sparc/mxcc.h b/include/asm-sparc/mxcc.h
new file mode 100644
index 000000000000..efe4e843122d
--- /dev/null
+++ b/include/asm-sparc/mxcc.h
@@ -0,0 +1,137 @@
+/* $Id: mxcc.h,v 1.7 1997/04/20 14:11:46 ecd Exp $
+ * mxcc.h: Definitions of the Viking MXCC registers
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MXCC_H
+#define _SPARC_MXCC_H
+
+/* These registers are accessed through ASI 0x2. */
+#define MXCC_DATSTREAM 0x1C00000 /* Data stream register */
+#define MXCC_SRCSTREAM 0x1C00100 /* Source stream register */
+#define MXCC_DESSTREAM 0x1C00200 /* Destination stream register */
+#define MXCC_RMCOUNT 0x1C00300 /* Count of references and misses */
+#define MXCC_STEST 0x1C00804 /* Internal self-test */
+#define MXCC_CREG 0x1C00A04 /* Control register */
+#define MXCC_SREG 0x1C00B00 /* Status register */
+#define MXCC_RREG 0x1C00C04 /* Reset register */
+#define MXCC_EREG 0x1C00E00 /* Error code register */
+#define MXCC_PREG 0x1C00F04 /* Address port register */
+
+/* Some MXCC constants. */
+#define MXCC_STREAM_SIZE 0x20 /* Size in bytes of one stream r/w */
+
+/* The MXCC Control Register:
+ *
+ * ----------------------------------------------------------------------
+ * | | RRC | RSV |PRE|MCE|PARE|ECE|RSV|
+ * ----------------------------------------------------------------------
+ * 31 10 9 8-6 5 4 3 2 1-0
+ *
+ * RRC: Controls what you read from MXCC_RMCOUNT reg.
+ * 0=Misses 1=References
+ * PRE: Prefetch enable
+ * MCE: Multiple Command Enable
+ * PARE: Parity enable
+ * ECE: External cache enable
+ */
+
+#define MXCC_CTL_RRC 0x00000200
+#define MXCC_CTL_PRE 0x00000020
+#define MXCC_CTL_MCE 0x00000010
+#define MXCC_CTL_PARE 0x00000008
+#define MXCC_CTL_ECE 0x00000004
+
+/* The MXCC Error Register:
+ *
+ * --------------------------------------------------------
+ * |ME| RSV|CE|PEW|PEE|ASE|EIV| MOPC|ECODE|PRIV|RSV|HPADDR|
+ * --------------------------------------------------------
+ * 31 30 29 28 27 26 25 24-15 14-7 6 5-3 2-0
+ *
+ * ME: Multiple Errors have occurred
+ * CE: Cache consistency Error
+ * PEW: Parity Error during a Write operation
+ * PEE: Parity Error involving the External cache
+ * ASE: ASynchronous Error
+ * EIV: This register is toast
+ * MOPC: MXCC Operation Code for instance causing error
+ * ECODE: The Error CODE
+ * PRIV: A privileged mode error? 0=no 1=yes
+ * HPADDR: High PhysicalADDRess bits (35-32)
+ */
+
+#define MXCC_ERR_ME 0x80000000
+#define MXCC_ERR_CE 0x20000000
+#define MXCC_ERR_PEW 0x10000000
+#define MXCC_ERR_PEE 0x08000000
+#define MXCC_ERR_ASE 0x04000000
+#define MXCC_ERR_EIV 0x02000000
+#define MXCC_ERR_MOPC 0x01FF8000
+#define MXCC_ERR_ECODE 0x00007F80
+#define MXCC_ERR_PRIV 0x00000040
+#define MXCC_ERR_HPADDR 0x0000000f
+
+/* The MXCC Port register:
+ *
+ * -----------------------------------------------------
+ * | | MID | |
+ * -----------------------------------------------------
+ * 31 21 20-18 17 0
+ *
+ * MID: The moduleID of the cpu your read this from.
+ */
+
+#ifndef __ASSEMBLY__
+
+extern __inline__ void mxcc_set_stream_src(unsigned long *paddr)
+{
+ unsigned long data0 = paddr[0];
+ unsigned long data1 = paddr[1];
+
+ __asm__ __volatile__ ("or %%g0, %0, %%g2\n\t"
+ "or %%g0, %1, %%g3\n\t"
+ "stda %%g2, [%2] %3\n\t" : :
+ "r" (data0), "r" (data1),
+ "r" (MXCC_SRCSTREAM),
+ "i" (ASI_M_MXCC) : "g2", "g3");
+}
+
+extern __inline__ void mxcc_set_stream_dst(unsigned long *paddr)
+{
+ unsigned long data0 = paddr[0];
+ unsigned long data1 = paddr[1];
+
+ __asm__ __volatile__ ("or %%g0, %0, %%g2\n\t"
+ "or %%g0, %1, %%g3\n\t"
+ "stda %%g2, [%2] %3\n\t" : :
+ "r" (data0), "r" (data1),
+ "r" (MXCC_DESSTREAM),
+ "i" (ASI_M_MXCC) : "g2", "g3");
+}
+
+extern __inline__ unsigned long mxcc_get_creg(void)
+{
+ unsigned long mxcc_control;
+
+ __asm__ __volatile__("set -1, %%g2\n\t"
+ "set -1, %%g3\n\t"
+ "stda %%g2, [%1] %2\n\t"
+ "lda [%3] %2, %0\n\t" :
+ "=r" (mxcc_control) :
+ "r" (MXCC_EREG), "i" (ASI_M_MXCC),
+ "r" (MXCC_CREG) : "g2", "g3");
+ return mxcc_control;
+}
+
+extern __inline__ void mxcc_set_creg(unsigned long mxcc_control)
+{
+ __asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+ "r" (mxcc_control), "r" (MXCC_CREG),
+ "i" (ASI_M_MXCC));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_MXCC_H) */
diff --git a/include/asm-sparc/namei.h b/include/asm-sparc/namei.h
new file mode 100644
index 000000000000..f2461e8a11ac
--- /dev/null
+++ b/include/asm-sparc/namei.h
@@ -0,0 +1,26 @@
+/* $Id: namei.h,v 1.16 2000/04/13 00:55:54 davem Exp $
+ * linux/include/asm-sparc/namei.h
+ *
+ * Routines to handle famous /usr/gnemul/s*.
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __SPARC_NAMEI_H
+#define __SPARC_NAMEI_H
+
+#define SPARC_BSD_EMUL "/usr/gnemul/sunos/"
+#define SPARC_SOL_EMUL "/usr/gnemul/solaris/"
+
+static inline char * __emul_prefix(void)
+{
+ switch (current->personality) {
+ case PER_SUNOS:
+ return SPARC_BSD_EMUL;
+ case PER_SVR4:
+ return SPARC_SOL_EMUL;
+ default:
+ return NULL;
+ }
+}
+
+#endif /* __SPARC_NAMEI_H */
diff --git a/include/asm-sparc/obio.h b/include/asm-sparc/obio.h
new file mode 100644
index 000000000000..62e1d77965f3
--- /dev/null
+++ b/include/asm-sparc/obio.h
@@ -0,0 +1,249 @@
+/* $Id: obio.h,v 1.4 1998/03/09 14:04:55 jj Exp $
+ * obio.h: Some useful locations in 0xFXXXXXXXX PA obio space on sun4d.
+ *
+ * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
+ */
+
+#ifndef _SPARC_OBIO_H
+#define _SPARC_OBIO_H
+
+#include <asm/asi.h>
+
+/* This weird monster likes to use the very upper parts of
+ 36bit PA for these things :) */
+
+/* CSR space (for each XDBUS)
+ * ------------------------------------------------------------------------
+ * | 0xFE | DEVID | | XDBUS ID | |
+ * ------------------------------------------------------------------------
+ * 35 28 27 20 19 10 9 8 7 0
+ */
+
+#define CSR_BASE_ADDR 0xe0000000
+#define CSR_CPU_SHIFT (32 - 4 - 5)
+#define CSR_XDBUS_SHIFT 8
+
+#define CSR_BASE(cpu) (((CSR_BASE_ADDR >> CSR_CPU_SHIFT) + cpu) << CSR_CPU_SHIFT)
+
+/* ECSR space (not for each XDBUS)
+ * ------------------------------------------------------------------------
+ * | 0xF | DEVID[7:1] | |
+ * ------------------------------------------------------------------------
+ * 35 32 31 25 24 0
+ */
+
+#define ECSR_BASE_ADDR 0x00000000
+#define ECSR_CPU_SHIFT (32 - 5)
+#define ECSR_DEV_SHIFT (32 - 8)
+
+#define ECSR_BASE(cpu) ((cpu) << ECSR_CPU_SHIFT)
+#define ECSR_DEV_BASE(devid) ((devid) << ECSR_DEV_SHIFT)
+
+/* Bus Watcher */
+#define BW_LOCAL_BASE 0xfff00000
+
+#define BW_CID 0x00000000
+#define BW_DBUS_CTRL 0x00000008
+#define BW_DBUS_DATA 0x00000010
+#define BW_CTRL 0x00001000
+#define BW_INTR_TABLE 0x00001040
+#define BW_INTR_TABLE_CLEAR 0x00001080
+#define BW_PRESCALER 0x000010c0
+#define BW_PTIMER_LIMIT 0x00002000
+#define BW_PTIMER_COUNTER2 0x00002004
+#define BW_PTIMER_NDLIMIT 0x00002008
+#define BW_PTIMER_CTRL 0x0000200c
+#define BW_PTIMER_COUNTER 0x00002010
+#define BW_TIMER_LIMIT 0x00003000
+#define BW_TIMER_COUNTER2 0x00003004
+#define BW_TIMER_NDLIMIT 0x00003008
+#define BW_TIMER_CTRL 0x0000300c
+#define BW_TIMER_COUNTER 0x00003010
+
+/* BW Control */
+#define BW_CTRL_USER_TIMER 0x00000004 /* Is User Timer Free run enabled */
+
+/* Boot Bus */
+#define BB_LOCAL_BASE 0xf0000000
+
+#define BB_STAT1 0x00100000
+#define BB_STAT2 0x00120000
+#define BB_STAT3 0x00140000
+#define BB_LEDS 0x002e0000
+
+/* Bits in BB_STAT2 */
+#define BB_STAT2_AC_INTR 0x04 /* Aiee! 5ms and power is gone... */
+#define BB_STAT2_TMP_INTR 0x10 /* My Penguins are burning. Are you able to smell it? */
+#define BB_STAT2_FAN_INTR 0x20 /* My fan refuses to work */
+#define BB_STAT2_PWR_INTR 0x40 /* On SC2000, one of the two ACs died. Ok, we go on... */
+#define BB_STAT2_MASK (BB_STAT2_AC_INTR|BB_STAT2_TMP_INTR|BB_STAT2_FAN_INTR|BB_STAT2_PWR_INTR)
+
+/* Cache Controller */
+#define CC_BASE 0x1F00000
+#define CC_DATSTREAM 0x1F00000 /* Data stream register */
+#define CC_DATSIZE 0x1F0003F /* Size */
+#define CC_SRCSTREAM 0x1F00100 /* Source stream register */
+#define CC_DESSTREAM 0x1F00200 /* Destination stream register */
+#define CC_RMCOUNT 0x1F00300 /* Count of references and misses */
+#define CC_IPEN 0x1F00406 /* Pending Interrupts */
+#define CC_IMSK 0x1F00506 /* Interrupt Mask */
+#define CC_ICLR 0x1F00606 /* Clear pending Interrupts */
+#define CC_IGEN 0x1F00704 /* Generate Interrupt register */
+#define CC_STEST 0x1F00804 /* Internal self-test */
+#define CC_CREG 0x1F00A04 /* Control register */
+#define CC_SREG 0x1F00B00 /* Status register */
+#define CC_RREG 0x1F00C04 /* Reset register */
+#define CC_EREG 0x1F00E00 /* Error code register */
+#define CC_CID 0x1F00F04 /* Component ID */
+
+#ifndef __ASSEMBLY__
+
+extern __inline__ int bw_get_intr_mask(int sbus_level)
+{
+ int mask;
+
+ __asm__ __volatile__ ("lduha [%1] %2, %0" :
+ "=r" (mask) :
+ "r" (BW_LOCAL_BASE + BW_INTR_TABLE + (sbus_level << 3)),
+ "i" (ASI_M_CTL));
+ return mask;
+}
+
+extern __inline__ void bw_clear_intr_mask(int sbus_level, int mask)
+{
+ __asm__ __volatile__ ("stha %0, [%1] %2" : :
+ "r" (mask),
+ "r" (BW_LOCAL_BASE + BW_INTR_TABLE_CLEAR + (sbus_level << 3)),
+ "i" (ASI_M_CTL));
+}
+
+extern __inline__ unsigned bw_get_prof_limit(int cpu)
+{
+ unsigned limit;
+
+ __asm__ __volatile__ ("lda [%1] %2, %0" :
+ "=r" (limit) :
+ "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT),
+ "i" (ASI_M_CTL));
+ return limit;
+}
+
+extern __inline__ void bw_set_prof_limit(int cpu, unsigned limit)
+{
+ __asm__ __volatile__ ("sta %0, [%1] %2" : :
+ "r" (limit),
+ "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT),
+ "i" (ASI_M_CTL));
+}
+
+extern __inline__ unsigned bw_get_ctrl(int cpu)
+{
+ unsigned ctrl;
+
+ __asm__ __volatile__ ("lda [%1] %2, %0" :
+ "=r" (ctrl) :
+ "r" (CSR_BASE(cpu) + BW_CTRL),
+ "i" (ASI_M_CTL));
+ return ctrl;
+}
+
+extern __inline__ void bw_set_ctrl(int cpu, unsigned ctrl)
+{
+ __asm__ __volatile__ ("sta %0, [%1] %2" : :
+ "r" (ctrl),
+ "r" (CSR_BASE(cpu) + BW_CTRL),
+ "i" (ASI_M_CTL));
+}
+
+extern unsigned char cpu_leds[32];
+
+extern __inline__ void show_leds(int cpuid)
+{
+ cpuid &= 0x1e;
+ __asm__ __volatile__ ("stba %0, [%1] %2" : :
+ "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]),
+ "r" (ECSR_BASE(cpuid) | BB_LEDS),
+ "i" (ASI_M_CTL));
+}
+
+extern __inline__ unsigned cc_get_ipen(void)
+{
+ unsigned pending;
+
+ __asm__ __volatile__ ("lduha [%1] %2, %0" :
+ "=r" (pending) :
+ "r" (CC_IPEN),
+ "i" (ASI_M_MXCC));
+ return pending;
+}
+
+extern __inline__ void cc_set_iclr(unsigned clear)
+{
+ __asm__ __volatile__ ("stha %0, [%1] %2" : :
+ "r" (clear),
+ "r" (CC_ICLR),
+ "i" (ASI_M_MXCC));
+}
+
+extern __inline__ unsigned cc_get_imsk(void)
+{
+ unsigned mask;
+
+ __asm__ __volatile__ ("lduha [%1] %2, %0" :
+ "=r" (mask) :
+ "r" (CC_IMSK),
+ "i" (ASI_M_MXCC));
+ return mask;
+}
+
+extern __inline__ void cc_set_imsk(unsigned mask)
+{
+ __asm__ __volatile__ ("stha %0, [%1] %2" : :
+ "r" (mask),
+ "r" (CC_IMSK),
+ "i" (ASI_M_MXCC));
+}
+
+extern __inline__ unsigned cc_get_imsk_other(int cpuid)
+{
+ unsigned mask;
+
+ __asm__ __volatile__ ("lduha [%1] %2, %0" :
+ "=r" (mask) :
+ "r" (ECSR_BASE(cpuid) | CC_IMSK),
+ "i" (ASI_M_CTL));
+ return mask;
+}
+
+extern __inline__ void cc_set_imsk_other(int cpuid, unsigned mask)
+{
+ __asm__ __volatile__ ("stha %0, [%1] %2" : :
+ "r" (mask),
+ "r" (ECSR_BASE(cpuid) | CC_IMSK),
+ "i" (ASI_M_CTL));
+}
+
+extern __inline__ void cc_set_igen(unsigned gen)
+{
+ __asm__ __volatile__ ("sta %0, [%1] %2" : :
+ "r" (gen),
+ "r" (CC_IGEN),
+ "i" (ASI_M_MXCC));
+}
+
+/* +-------+-------------+-----------+------------------------------------+
+ * | bcast | devid | sid | levels mask |
+ * +-------+-------------+-----------+------------------------------------+
+ * 31 30 23 22 15 14 0
+ */
+#define IGEN_MESSAGE(bcast, devid, sid, levels) \
+ (((bcast) << 31) | ((devid) << 23) | ((sid) << 15) | (levels))
+
+extern __inline__ void sun4d_send_ipi(int cpu, int level)
+{
+ cc_set_igen(IGEN_MESSAGE(0, cpu << 3, 6 + ((level >> 1) & 7), 1 << (level - 1)));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_OBIO_H) */
diff --git a/include/asm-sparc/openprom.h b/include/asm-sparc/openprom.h
new file mode 100644
index 000000000000..12929a20f536
--- /dev/null
+++ b/include/asm-sparc/openprom.h
@@ -0,0 +1,258 @@
+/* $Id: openprom.h,v 1.24 2000/06/04 06:23:53 anton Exp $ */
+#ifndef __SPARC_OPENPROM_H
+#define __SPARC_OPENPROM_H
+
+/* openprom.h: Prom structures and defines for access to the OPENBOOT
+ * prom routines and data areas.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <asm/vaddrs.h>
+
+/* Empirical constants... */
+#define LINUX_OPPROM_MAGIC 0x10010407
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+ int (*v0_devopen)(char *device_str);
+ int (*v0_devclose)(int dev_desc);
+ int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+ int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+ int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
+ int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
+ int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+ int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+ int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+ int (*v2_inst2pkg)(int d); /* Convert ihandle to phandle */
+ char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
+ void (*v2_dumb_mem_free)(char *va, unsigned sz);
+
+ /* To map devices into virtual I/O space. */
+ char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
+ void (*v2_dumb_munmap)(char *virta, unsigned size);
+
+ int (*v2_dev_open)(char *devpath);
+ void (*v2_dev_close)(int d);
+ int (*v2_dev_read)(int d, char *buf, int nbytes);
+ int (*v2_dev_write)(int d, char *buf, int nbytes);
+ int (*v2_dev_seek)(int d, int hi, int lo);
+
+ /* Never issued (multistage load support) */
+ void (*v2_wheee2)(void);
+ void (*v2_wheee3)(void);
+};
+
+struct linux_mlist_v0 {
+ struct linux_mlist_v0 *theres_more;
+ char *start_adr;
+ unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+ struct linux_mlist_v0 **v0_totphys;
+ struct linux_mlist_v0 **v0_prommap;
+ struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+ char *argv[8];
+ char args[100];
+ char boot_dev[2];
+ int boot_dev_ctrl;
+ int boot_dev_unit;
+ int dev_partition;
+ char *kernel_file_name;
+ void *aieee1; /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+ char **bootpath;
+ char **bootargs;
+ int *fd_stdin;
+ int *fd_stdout;
+};
+
+/* The top level PROM vector. */
+struct linux_romvec {
+ /* Version numbers. */
+ unsigned int pv_magic_cookie;
+ unsigned int pv_romvers;
+ unsigned int pv_plugin_revision;
+ unsigned int pv_printrev;
+
+ /* Version 0 memory descriptors. */
+ struct linux_mem_v0 pv_v0mem;
+
+ /* Node operations. */
+ struct linux_nodeops *pv_nodeops;
+
+ char **pv_bootstr;
+ struct linux_dev_v0_funcs pv_v0devops;
+
+ char *pv_stdin;
+ char *pv_stdout;
+#define PROMDEV_KBD 0 /* input from keyboard */
+#define PROMDEV_SCREEN 0 /* output to screen */
+#define PROMDEV_TTYA 1 /* in/out to ttya */
+#define PROMDEV_TTYB 2 /* in/out to ttyb */
+
+ /* Blocking getchar/putchar. NOT REENTRANT! (grr) */
+ int (*pv_getchar)(void);
+ void (*pv_putchar)(int ch);
+
+ /* Non-blocking variants. */
+ int (*pv_nbgetchar)(void);
+ int (*pv_nbputchar)(int ch);
+
+ void (*pv_putstr)(char *str, int len);
+
+ /* Miscellany. */
+ void (*pv_reboot)(char *bootstr);
+ void (*pv_printf)(__const__ char *fmt, ...);
+ void (*pv_abort)(void);
+ __volatile__ int *pv_ticks;
+ void (*pv_halt)(void);
+ void (**pv_synchook)(void);
+
+ /* Evaluate a forth string, not different proto for V0 and V2->up. */
+ union {
+ void (*v0_eval)(int len, char *str);
+ void (*v2_eval)(char *str);
+ } pv_fortheval;
+
+ struct linux_arguments_v0 **pv_v0bootargs;
+
+ /* Get ether address. */
+ unsigned int (*pv_enaddr)(int d, char *enaddr);
+
+ struct linux_bootargs_v2 pv_v2bootargs;
+ struct linux_dev_v2_funcs pv_v2devops;
+
+ int filler[15];
+
+ /* This one is sun4c/sun4 only. */
+ void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+
+ /* Prom version 3 Multiprocessor routines. This stuff is crazy.
+ * No joke. Calling these when there is only one cpu probably
+ * crashes the machine, have to test this. :-)
+ */
+
+ /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+ * 'thiscontext' executing at address 'prog_counter'
+ */
+ int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
+ int thiscontext, char *prog_counter);
+
+ /* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+ * until a resume cpu call is made.
+ */
+ int (*v3_cpustop)(unsigned int whichcpu);
+
+ /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+ * resume cpu call is made.
+ */
+ int (*v3_cpuidle)(unsigned int whichcpu);
+
+ /* v3_cpuresume() will resume processor 'whichcpu' executing
+ * starting with whatever 'pc' and 'npc' were left at the
+ * last 'idle' or 'stop' call.
+ */
+ int (*v3_cpuresume)(unsigned int whichcpu);
+};
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+ int (*no_nextnode)(int node);
+ int (*no_child)(int node);
+ int (*no_proplen)(int node, char *name);
+ int (*no_getprop)(int node, char *name, char *val);
+ int (*no_setprop)(int node, char *name, char *val, int len);
+ char * (*no_nextprop)(int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX 16
+#define PROMVADDR_MAX 16
+#define PROMINTR_MAX 15
+
+struct linux_prom_registers {
+ unsigned int which_io; /* is this in OBIO space? */
+ unsigned int phys_addr; /* The physical address of this register */
+ unsigned int reg_size; /* How many bytes does this register take up? */
+};
+
+struct linux_prom_irqs {
+ int pri; /* IRQ priority */
+ int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+ unsigned int ot_child_space;
+ unsigned int ot_child_base; /* Bus feels this */
+ unsigned int ot_parent_space;
+ unsigned int ot_parent_base; /* CPU looks from here */
+ unsigned int or_size;
+};
+
+/* Ranges and reg properties are a bit different for PCI. */
+struct linux_prom_pci_registers {
+ /*
+ * We don't know what information this field contain.
+ * We guess, PCI device function is in bits 15:8
+ * So, ...
+ */
+ unsigned int which_io; /* Let it be which_io */
+
+ unsigned int phys_hi;
+ unsigned int phys_lo;
+
+ unsigned int size_hi;
+ unsigned int size_lo;
+};
+
+struct linux_prom_pci_ranges {
+ unsigned int child_phys_hi; /* Only certain bits are encoded here. */
+ unsigned int child_phys_mid;
+ unsigned int child_phys_lo;
+
+ unsigned int parent_phys_hi;
+ unsigned int parent_phys_lo;
+
+ unsigned int size_hi;
+ unsigned int size_lo;
+};
+
+struct linux_prom_pci_assigned_addresses {
+ unsigned int which_io;
+
+ unsigned int phys_hi;
+ unsigned int phys_lo;
+
+ unsigned int size_hi;
+ unsigned int size_lo;
+};
+
+struct linux_prom_ebus_ranges {
+ unsigned int child_phys_hi;
+ unsigned int child_phys_lo;
+
+ unsigned int parent_phys_hi;
+ unsigned int parent_phys_mid;
+ unsigned int parent_phys_lo;
+
+ unsigned int size;
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_OPENPROM_H) */
diff --git a/include/asm-sparc/openpromio.h b/include/asm-sparc/openpromio.h
new file mode 100644
index 000000000000..917fb8e9c633
--- /dev/null
+++ b/include/asm-sparc/openpromio.h
@@ -0,0 +1,69 @@
+#ifndef _SPARC_OPENPROMIO_H
+#define _SPARC_OPENPROMIO_H
+
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * SunOS and Solaris /dev/openprom definitions. The ioctl values
+ * were chosen to be exactly equal to the SunOS equivalents.
+ */
+
+struct openpromio
+{
+ u_int oprom_size; /* Actual size of the oprom_array. */
+ char oprom_array[1]; /* Holds property names and values. */
+};
+
+#define OPROMMAXPARAM 4096 /* Maximum size of oprom_array. */
+
+#define OPROMGETOPT 0x20004F01
+#define OPROMSETOPT 0x20004F02
+#define OPROMNXTOPT 0x20004F03
+#define OPROMSETOPT2 0x20004F04
+#define OPROMNEXT 0x20004F05
+#define OPROMCHILD 0x20004F06
+#define OPROMGETPROP 0x20004F07
+#define OPROMNXTPROP 0x20004F08
+#define OPROMU2P 0x20004F09
+#define OPROMGETCONS 0x20004F0A
+#define OPROMGETFBNAME 0x20004F0B
+#define OPROMGETBOOTARGS 0x20004F0C
+/* Linux extensions */ /* Arguments in oprom_array: */
+#define OPROMSETCUR 0x20004FF0 /* int node - Sets current node */
+#define OPROMPCI2NODE 0x20004FF1 /* int pci_bus, pci_devfn - Sets current node to PCI device's node */
+#define OPROMPATH2NODE 0x20004FF2 /* char path[] - Set current node from fully qualified PROM path */
+
+/*
+ * Return values from OPROMGETCONS:
+ */
+
+#define OPROMCONS_NOT_WSCONS 0
+#define OPROMCONS_STDIN_IS_KBD 0x1 /* stdin device is kbd */
+#define OPROMCONS_STDOUT_IS_FB 0x2 /* stdout is a framebuffer */
+#define OPROMCONS_OPENPROM 0x4 /* supports openboot */
+
+
+/*
+ * NetBSD/OpenBSD /dev/openprom definitions.
+ */
+
+struct opiocdesc
+{
+ int op_nodeid; /* PROM Node ID (value-result) */
+ int op_namelen; /* Length of op_name. */
+ char __user *op_name; /* Pointer to the property name. */
+ int op_buflen; /* Length of op_buf (value-result) */
+ char __user *op_buf; /* Pointer to buffer. */
+};
+
+#define OPIOCGET _IOWR('O', 1, struct opiocdesc)
+#define OPIOCSET _IOW('O', 2, struct opiocdesc)
+#define OPIOCNEXTPROP _IOWR('O', 3, struct opiocdesc)
+#define OPIOCGETOPTNODE _IOR('O', 4, int)
+#define OPIOCGETNEXT _IOWR('O', 5, int)
+#define OPIOCGETCHILD _IOWR('O', 6, int)
+
+#endif /* _SPARC_OPENPROMIO_H */
+
diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h
new file mode 100644
index 000000000000..95944556d8b6
--- /dev/null
+++ b/include/asm-sparc/oplib.h
@@ -0,0 +1,317 @@
+/* $Id: oplib.h,v 1.23 2001/12/21 00:54:31 davem Exp $
+ * oplib.h: Describes the interface and available routines in the
+ * Linux Prom library.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_OPLIB_H
+#define __SPARC_OPLIB_H
+
+#include <asm/openprom.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+
+/* The master romvec pointer... */
+extern struct linux_romvec *romvec;
+
+/* Enumeration to describe the prom major version we have detected. */
+enum prom_major_version {
+ PROM_V0, /* Original sun4c V0 prom */
+ PROM_V2, /* sun4c and early sun4m V2 prom */
+ PROM_V3, /* sun4m and later, up to sun4d/sun4e machines V3 */
+ PROM_P1275, /* IEEE compliant ISA based Sun PROM, only sun4u */
+ PROM_AP1000, /* actually no prom at all */
+ PROM_SUN4, /* Old sun4 proms are totally different, but we'll shoehorn it to make it fit */
+};
+
+extern enum prom_major_version prom_vers;
+/* Revision, and firmware revision. */
+extern unsigned int prom_rev, prom_prev;
+
+/* Root node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_root_node;
+
+/* PROM stdin and stdout */
+extern int prom_stdin, prom_stdout;
+
+/* Pointer to prom structure containing the device tree traversal
+ * and usage utility functions. Only prom-lib should use these,
+ * users use the interface defined by the library only!
+ */
+extern struct linux_nodeops *prom_nodeops;
+
+/* The functions... */
+
+/* You must call prom_init() before using any of the library services,
+ * preferably as early as possible. Pass it the romvec pointer.
+ */
+extern void prom_init(struct linux_romvec *rom_ptr);
+
+/* Boot argument acquisition, returns the boot command line string. */
+extern char *prom_getbootargs(void);
+
+/* Device utilities. */
+
+/* Map and unmap devices in IO space at virtual addresses. Note that the
+ * virtual address you pass is a request and the prom may put your mappings
+ * somewhere else, so check your return value as that is where your new
+ * mappings really are!
+ *
+ * Another note, these are only available on V2 or higher proms!
+ */
+extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
+extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
+
+/* Device operations. */
+
+/* Open the device described by the passed string. Note, that the format
+ * of the string is different on V0 vs. V2->higher proms. The caller must
+ * know what he/she is doing! Returns the device descriptor, an int.
+ */
+extern int prom_devopen(char *device_string);
+
+/* Close a previously opened device described by the passed integer
+ * descriptor.
+ */
+extern int prom_devclose(int device_handle);
+
+/* Do a seek operation on the device described by the passed integer
+ * descriptor.
+ */
+extern void prom_seek(int device_handle, unsigned int seek_hival,
+ unsigned int seek_lowval);
+
+/* Machine memory configuration routine. */
+
+/* This function returns a V0 format memory descriptor table, it has three
+ * entries. One for the total amount of physical ram on the machine, one
+ * for the amount of physical ram available, and one describing the virtual
+ * areas which are allocated by the prom. So, in a sense the physical
+ * available is a calculation of the total physical minus the physical mapped
+ * by the prom with virtual mappings.
+ *
+ * These lists are returned pre-sorted, this should make your life easier
+ * since the prom itself is way too lazy to do such nice things.
+ */
+extern struct linux_mem_v0 *prom_meminfo(void);
+
+/* Miscellaneous routines, don't really fit in any category per se. */
+
+/* Reboot the machine with the command line passed. */
+extern void prom_reboot(char *boot_command);
+
+/* Evaluate the forth string passed. */
+extern void prom_feval(char *forth_string);
+
+/* Enter the prom, with possibility of continuation with the 'go'
+ * command in newer proms.
+ */
+extern void prom_cmdline(void);
+
+/* Enter the prom, with no chance of continuation for the stand-alone
+ * which calls this.
+ */
+extern void prom_halt(void) __attribute__ ((noreturn));
+
+/* Set the PROM 'sync' callback function to the passed function pointer.
+ * When the user gives the 'sync' command at the prom prompt while the
+ * kernel is still active, the prom will call this routine.
+ *
+ * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX
+ */
+typedef void (*sync_func_t)(void);
+extern void prom_setsync(sync_func_t func_ptr);
+
+/* Acquire the IDPROM of the root node in the prom device tree. This
+ * gets passed a buffer where you would like it stuffed. The return value
+ * is the format type of this idprom or 0xff on error.
+ */
+extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
+
+/* Get the prom major version. */
+extern int prom_version(void);
+
+/* Get the prom plugin revision. */
+extern int prom_getrev(void);
+
+/* Get the prom firmware revision. */
+extern int prom_getprev(void);
+
+/* Character operations to/from the console.... */
+
+/* Non-blocking get character from console. */
+extern int prom_nbgetchar(void);
+
+/* Non-blocking put character to console. */
+extern int prom_nbputchar(char character);
+
+/* Blocking get character from console. */
+extern char prom_getchar(void);
+
+/* Blocking put character to console. */
+extern void prom_putchar(char character);
+
+/* Prom's internal routines, don't use in kernel/boot code. */
+extern void prom_printf(char *fmt, ...);
+extern void prom_write(const char *buf, unsigned int len);
+
+/* Query for input device type */
+
+enum prom_input_device {
+ PROMDEV_IKBD, /* input from keyboard */
+ PROMDEV_ITTYA, /* input from ttya */
+ PROMDEV_ITTYB, /* input from ttyb */
+ PROMDEV_I_UNK,
+};
+
+extern enum prom_input_device prom_query_input_device(void);
+
+/* Query for output device type */
+
+enum prom_output_device {
+ PROMDEV_OSCREEN, /* to screen */
+ PROMDEV_OTTYA, /* to ttya */
+ PROMDEV_OTTYB, /* to ttyb */
+ PROMDEV_O_UNK,
+};
+
+extern enum prom_output_device prom_query_output_device(void);
+
+/* Multiprocessor operations... */
+
+/* Start the CPU with the given device tree node, context table, and context
+ * at the passed program counter.
+ */
+extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table,
+ int context, char *program_counter);
+
+/* Stop the CPU with the passed device tree node. */
+extern int prom_stopcpu(int cpunode);
+
+/* Idle the CPU with the passed device tree node. */
+extern int prom_idlecpu(int cpunode);
+
+/* Re-Start the CPU with the passed device tree node. */
+extern int prom_restartcpu(int cpunode);
+
+/* PROM memory allocation facilities... */
+
+/* Allocated at possibly the given virtual address a chunk of the
+ * indicated size.
+ */
+extern char *prom_alloc(char *virt_hint, unsigned int size);
+
+/* Free a previously allocated chunk. */
+extern void prom_free(char *virt_addr, unsigned int size);
+
+/* Sun4/sun4c specific memory-management startup hook. */
+
+/* Map the passed segment in the given context at the passed
+ * virtual address.
+ */
+extern void prom_putsegment(int context, unsigned long virt_addr,
+ int physical_segment);
+
+
+/* PROM device tree traversal functions... */
+
+#ifdef PROMLIB_INTERNAL
+
+/* Internal version of prom_getchild. */
+extern int __prom_getchild(int parent_node);
+
+/* Internal version of prom_getsibling. */
+extern int __prom_getsibling(int node);
+
+#endif
+
+
+/* Get the child node of the given node, or zero if no child exists. */
+extern int prom_getchild(int parent_node);
+
+/* Get the next sibling node of the given node, or zero if no further
+ * siblings exist.
+ */
+extern int prom_getsibling(int node);
+
+/* Get the length, at the passed node, of the given property type.
+ * Returns -1 on error (ie. no such property at this node).
+ */
+extern int prom_getproplen(int thisnode, char *property);
+
+/* Fetch the requested property using the given buffer. Returns
+ * the number of bytes the prom put into your buffer or -1 on error.
+ */
+extern int __must_check prom_getproperty(int thisnode, char *property,
+ char *prop_buffer, int propbuf_size);
+
+/* Acquire an integer property. */
+extern int prom_getint(int node, char *property);
+
+/* Acquire an integer property, with a default value. */
+extern int prom_getintdefault(int node, char *property, int defval);
+
+/* Acquire a boolean property, 0=FALSE 1=TRUE. */
+extern int prom_getbool(int node, char *prop);
+
+/* Acquire a string property, null string on error. */
+extern void prom_getstring(int node, char *prop, char *buf, int bufsize);
+
+/* Does the passed node have the given "name"? YES=1 NO=0 */
+extern int prom_nodematch(int thisnode, char *name);
+
+/* Puts in buffer a prom name in the form name@x,y or name (x for which_io
+ * and y for first regs phys address
+ */
+extern int prom_getname(int node, char *buf, int buflen);
+
+/* Search all siblings starting at the passed node for "name" matching
+ * the given string. Returns the node on success, zero on failure.
+ */
+extern int prom_searchsiblings(int node_start, char *name);
+
+/* Return the first property type, as a string, for the given node.
+ * Returns a null string on error.
+ */
+extern char *prom_firstprop(int node, char *buffer);
+
+/* Returns the next property after the passed property for the given
+ * node. Returns null string on failure.
+ */
+extern char *prom_nextprop(int node, char *prev_property, char *buffer);
+
+/* Returns phandle of the path specified */
+extern int prom_finddevice(char *name);
+
+/* Returns 1 if the specified node has given property. */
+extern int prom_node_has_property(int node, char *property);
+
+/* Set the indicated property at the given node with the passed value.
+ * Returns the number of bytes of your value that the prom took.
+ */
+extern int prom_setprop(int node, char *prop_name, char *prop_value,
+ int value_size);
+
+extern int prom_pathtoinode(char *path);
+extern int prom_inst2pkg(int);
+
+/* Dorking with Bus ranges... */
+
+/* Apply promlib probes OBIO ranges to registers. */
+extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs);
+
+/* Apply ranges of any prom node (and optionally parent node as well) to registers. */
+extern void prom_apply_generic_ranges(int node, int parent,
+ struct linux_prom_registers *sbusregs, int nregs);
+
+/* CPU probing helpers. */
+int cpu_find_by_instance(int instance, int *prom_node, int *mid);
+int cpu_find_by_mid(int mid, int *prom_node);
+int cpu_get_hwmid(int prom_node);
+
+extern spinlock_t prom_lock;
+
+#endif /* !(__SPARC_OPLIB_H) */
diff --git a/include/asm-sparc/page.h b/include/asm-sparc/page.h
new file mode 100644
index 000000000000..383060e90d94
--- /dev/null
+++ b/include/asm-sparc/page.h
@@ -0,0 +1,181 @@
+/* $Id: page.h,v 1.55 2000/10/30 21:01:41 davem Exp $
+ * page.h: Various defines and such for MMU operations on the Sparc for
+ * the Linux kernel.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PAGE_H
+#define _SPARC_PAGE_H
+
+#include <linux/config.h>
+#ifdef CONFIG_SUN4
+#define PAGE_SHIFT 13
+#else
+#define PAGE_SHIFT 12
+#endif
+#ifndef __ASSEMBLY__
+/* I have my suspicions... -DaveM */
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#else
+#define PAGE_SIZE (1 << PAGE_SHIFT)
+#endif
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to,from) memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+#define clear_user_page(addr, vaddr, page) \
+ do { clear_page(addr); \
+ sparc_flush_page_to_ram(page); \
+ } while (0)
+#define copy_user_page(to, from, vaddr, page) \
+ do { copy_page(to, from); \
+ sparc_flush_page_to_ram(page); \
+ } while (0)
+
+/* The following structure is used to hold the physical
+ * memory configuration of the machine. This is filled in
+ * probe_memory() and is later used by mem_init() to set up
+ * mem_map[]. We statically allocate SPARC_PHYS_BANKS of
+ * these structs, this is arbitrary. The entry after the
+ * last valid one has num_bytes==0.
+ */
+
+struct sparc_phys_banks {
+ unsigned long base_addr;
+ unsigned long num_bytes;
+};
+
+#define SPARC_PHYS_BANKS 32
+
+extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1];
+
+/* Cache alias structure. Entry is valid if context != -1. */
+struct cache_palias {
+ unsigned long vaddr;
+ int context;
+};
+
+extern struct cache_palias *sparc_aliases;
+
+/* passing structs on the Sparc slow us down tremendously... */
+
+/* #define STRICT_MM_TYPECHECKS */
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long iopte; } iopte_t;
+typedef struct { unsigned long pmdv[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long ctxd; } ctxd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long iopgprot; } iopgprot_t;
+
+#define pte_val(x) ((x).pte)
+#define iopte_val(x) ((x).iopte)
+#define pmd_val(x) ((x).pmdv[0])
+#define pgd_val(x) ((x).pgd)
+#define ctxd_val(x) ((x).ctxd)
+#define pgprot_val(x) ((x).pgprot)
+#define iopgprot_val(x) ((x).iopgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __iopte(x) ((iopte_t) { (x) } )
+/* #define __pmd(x) ((pmd_t) { (x) } ) */ /* XXX procedure with loop */
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __ctxd(x) ((ctxd_t) { (x) } )
+#define __pgprot(x) ((pgprot_t) { (x) } )
+#define __iopgprot(x) ((iopgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned long iopte_t;
+typedef struct { unsigned long pmdv[16]; } pmd_t;
+typedef unsigned long pgd_t;
+typedef unsigned long ctxd_t;
+typedef unsigned long pgprot_t;
+typedef unsigned long iopgprot_t;
+
+#define pte_val(x) (x)
+#define iopte_val(x) (x)
+#define pmd_val(x) ((x).pmdv[0])
+#define pgd_val(x) (x)
+#define ctxd_val(x) (x)
+#define pgprot_val(x) (x)
+#define iopgprot_val(x) (x)
+
+#define __pte(x) (x)
+#define __iopte(x) (x)
+/* #define __pmd(x) (x) */ /* XXX later */
+#define __pgd(x) (x)
+#define __ctxd(x) (x)
+#define __pgprot(x) (x)
+#define __iopgprot(x) (x)
+
+#endif
+
+extern unsigned long sparc_unmapped_base;
+
+BTFIXUPDEF_SETHI(sparc_unmapped_base)
+
+#define TASK_UNMAPPED_BASE BTFIXUP_SETHI(sparc_unmapped_base)
+
+/* Pure 2^n version of get_order */
+extern __inline__ int get_order(unsigned long size)
+{
+ int order;
+
+ size = (size-1) >> (PAGE_SHIFT-1);
+ order = -1;
+ do {
+ size >>= 1;
+ order++;
+ } while (size);
+ return order;
+}
+
+#else /* !(__ASSEMBLY__) */
+
+#define __pgprot(x) (x)
+
+#endif /* !(__ASSEMBLY__) */
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+#define PAGE_OFFSET 0xf0000000
+#ifndef __ASSEMBLY__
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+#endif
+#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + phys_base)
+#define __va(x) ((void *)((unsigned long) (x) - phys_base + PAGE_OFFSET))
+
+#define virt_to_phys __pa
+#define phys_to_virt __va
+
+#define pfn_to_page(pfn) (mem_map + ((pfn)-(pfn_base)))
+#define page_to_pfn(page) ((unsigned long)(((page) - mem_map) + pfn_base))
+#define virt_to_page(kaddr) (mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT)))
+
+#define pfn_valid(pfn) (((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr))
+#define virt_addr_valid(kaddr) ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr)
+
+#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC_PAGE_H */
diff --git a/include/asm-sparc/param.h b/include/asm-sparc/param.h
new file mode 100644
index 000000000000..beaf02d364f2
--- /dev/null
+++ b/include/asm-sparc/param.h
@@ -0,0 +1,23 @@
+/* $Id: param.h,v 1.4 2000/10/30 21:01:41 davem Exp $ */
+#ifndef _ASMSPARC_PARAM_H
+#define _ASMSPARC_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ 100 /* Internal kernel timer frequency */
+# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC (USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 8192 /* Thanks for sun4's we carry baggage... */
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#endif
diff --git a/include/asm-sparc/pbm.h b/include/asm-sparc/pbm.h
new file mode 100644
index 000000000000..0aba3a82c2eb
--- /dev/null
+++ b/include/asm-sparc/pbm.h
@@ -0,0 +1,46 @@
+/* $Id: pbm.h,v 1.3 1999/12/20 17:06:35 zaitcev Exp $
+ *
+ * pbm.h: PCI bus module pseudo driver software state
+ * Adopted from sparc64 by V. Roganov and G. Raiko
+ *
+ * Original header:
+ * pbm.h: U2P PCI bus module pseudo driver software state.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * To put things into perspective, consider sparc64 with a few PCI controllers.
+ * Each type would have an own structure, with instances related one to one.
+ * We have only pcic on sparc, but we want to be compatible with sparc64 pbm.h.
+ * All three represent different abstractions.
+ * pci_bus - Linux PCI subsystem view of a PCI bus (including bridged buses)
+ * pbm - Arch-specific view of a PCI bus (sparc or sparc64)
+ * pcic - Chip-specific information for PCIC.
+ */
+
+#ifndef __SPARC_PBM_H
+#define __SPARC_PBM_H
+
+#include <linux/pci.h>
+#include <asm/oplib.h>
+
+struct linux_pbm_info {
+ int prom_node;
+ char prom_name[64];
+ /* struct linux_prom_pci_ranges pbm_ranges[PROMREG_MAX]; */
+ /* int num_pbm_ranges; */
+
+ /* Now things for the actual PCI bus probes. */
+ unsigned int pci_first_busno; /* Can it be nonzero? */
+ struct pci_bus *pci_bus; /* Was inline, MJ allocs now */
+};
+
+/* PCI devices which are not bridges have this placed in their pci_dev
+ * sysdata member. This makes OBP aware PCI device drivers easier to
+ * code.
+ */
+struct pcidev_cookie {
+ struct linux_pbm_info *pbm;
+ int prom_node;
+};
+
+#endif /* !(__SPARC_PBM_H) */
diff --git a/include/asm-sparc/pci.h b/include/asm-sparc/pci.h
new file mode 100644
index 000000000000..d200a25a7373
--- /dev/null
+++ b/include/asm-sparc/pci.h
@@ -0,0 +1,163 @@
+#ifndef __SPARC_PCI_H
+#define __SPARC_PCI_H
+
+#ifdef __KERNEL__
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes
+ * or architectures with incomplete PCI setup by the loader.
+ */
+#define pcibios_assign_all_busses() 0
+#define pcibios_scan_all_fns(a, b) 0
+
+#define PCIBIOS_MIN_IO 0UL
+#define PCIBIOS_MIN_MEM 0UL
+
+#define PCI_IRQ_NONE 0xffffffff
+
+extern inline void pcibios_set_master(struct pci_dev *dev)
+{
+ /* No special bus mastering setup handling */
+}
+
+extern inline void pcibios_penalize_isa_irq(int irq)
+{
+ /* We don't do dynamic PCI IRQ allocation */
+}
+
+/* Dynamic DMA mapping stuff.
+ */
+#define PCI_DMA_BUS_IS_PHYS (0)
+
+#include <asm/scatterlist.h>
+
+struct pci_dev;
+
+/* Allocate and map kernel buffer using consistent mode DMA for a device.
+ * hwdev should be valid struct pci_dev pointer for PCI devices.
+ */
+extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle);
+
+/* Free and unmap a consistent DMA buffer.
+ * cpu_addr is what was returned from pci_alloc_consistent,
+ * size must be the same as what as passed into pci_alloc_consistent,
+ * and likewise dma_addr must be the same as what *dma_addrp was set to.
+ *
+ * References to the memory and mappings assosciated with cpu_addr/dma_addr
+ * past this call are illegal.
+ */
+extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle);
+
+/* Map a single buffer of the indicated size for DMA in streaming mode.
+ * The 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory
+ * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed.
+ */
+extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction);
+
+/* Unmap a single streaming mode DMA translation. The dma_addr and size
+ * must match what was provided for in a previous pci_map_single call. All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction);
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
+ dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
+ __u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME) \
+ ((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
+ (((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME) \
+ ((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
+ (((PTR)->LEN_NAME) = (VAL))
+
+/*
+ * Same as above, only with pages instead of mapped addresses.
+ */
+extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
+ unsigned long offset, size_t size, int direction);
+extern void pci_unmap_page(struct pci_dev *hwdev,
+ dma_addr_t dma_address, size_t size, int direction);
+
+/* Map a set of buffers described by scatterlist in streaming
+ * mode for DMA. This is the scather-gather version of the
+ * above pci_map_single interface. Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length. They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ * DMA address/length pairs than there are SG table elements.
+ * (for example via virtual mapping capabilities)
+ * The routine returns the number of addr/length pairs actually
+ * used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction);
+
+/* Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction);
+
+/* Make physical memory consistent for a single
+ * streaming mode DMA translation after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so. At the
+ * next point you give the PCI dma address back to the card, you
+ * must first perform a pci_dma_sync_for_device, and then the device
+ * again owns the buffer.
+ */
+extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
+extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
+
+/* Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as pci_dma_sync_single_* but for a scatter-gather list,
+ * same rules and usage.
+ */
+extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
+extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
+
+/* Return whether the given PCI device DMA address mask can
+ * be supported properly. For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+extern inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+ return 1;
+}
+
+#define pci_dac_dma_supported(dev, mask) (0)
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#define PCI_DMA_ERROR_CODE (~(dma_addr_t)0x0)
+
+static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
+{
+ return (dma_addr == PCI_DMA_ERROR_CODE);
+}
+
+#endif /* __KERNEL__ */
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+#endif /* __SPARC_PCI_H */
diff --git a/include/asm-sparc/pcic.h b/include/asm-sparc/pcic.h
new file mode 100644
index 000000000000..301ae8022ddd
--- /dev/null
+++ b/include/asm-sparc/pcic.h
@@ -0,0 +1,123 @@
+/* $Id: pcic.h,v 1.4 1999/11/17 07:34:20 zaitcev Exp $
+ * pcic.h: JavaEngine 1 specific PCI definitions.
+ *
+ * Copyright (C) 1998 V. Roganov and G. Raiko
+ */
+
+#ifndef __SPARC_PCIC_H
+#define __SPARC_PCIC_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/smp.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <asm/pbm.h>
+
+struct linux_pcic {
+ void * __iomem pcic_regs;
+ unsigned long pcic_io;
+ void * __iomem pcic_config_space_addr;
+ void * __iomem pcic_config_space_data;
+ struct resource pcic_res_regs;
+ struct resource pcic_res_io;
+ struct resource pcic_res_cfg_addr;
+ struct resource pcic_res_cfg_data;
+ struct linux_pbm_info pbm;
+ struct pcic_ca2irq *pcic_imap;
+ int pcic_imdim;
+};
+
+extern int pcic_probe(void);
+/* Erm... MJ redefined pcibios_present() so that it does not work early. */
+extern int pcic_present(void);
+extern void sun4m_pci_init_IRQ(void);
+
+#endif
+
+/* Size of PCI I/O space which we relocate. */
+#define PCI_SPACE_SIZE 0x1000000 /* 16 MB */
+
+/* PCIC Register Set. */
+#define PCI_DIAGNOSTIC_0 0x40 /* 32 bits */
+#define PCI_SIZE_0 0x44 /* 32 bits */
+#define PCI_SIZE_1 0x48 /* 32 bits */
+#define PCI_SIZE_2 0x4c /* 32 bits */
+#define PCI_SIZE_3 0x50 /* 32 bits */
+#define PCI_SIZE_4 0x54 /* 32 bits */
+#define PCI_SIZE_5 0x58 /* 32 bits */
+#define PCI_PIO_CONTROL 0x60 /* 8 bits */
+#define PCI_DVMA_CONTROL 0x62 /* 8 bits */
+#define PCI_DVMA_CONTROL_INACTIVITY_REQ (1<<0)
+#define PCI_DVMA_CONTROL_IOTLB_ENABLE (1<<0)
+#define PCI_DVMA_CONTROL_IOTLB_DISABLE 0
+#define PCI_DVMA_CONTROL_INACTIVITY_ACK (1<<4)
+#define PCI_INTERRUPT_CONTROL 0x63 /* 8 bits */
+#define PCI_CPU_INTERRUPT_PENDING 0x64 /* 32 bits */
+#define PCI_DIAGNOSTIC_1 0x68 /* 16 bits */
+#define PCI_SOFTWARE_INT_CLEAR 0x6a /* 16 bits */
+#define PCI_SOFTWARE_INT_SET 0x6e /* 16 bits */
+#define PCI_SYS_INT_PENDING 0x70 /* 32 bits */
+#define PCI_SYS_INT_PENDING_PIO 0x40000000
+#define PCI_SYS_INT_PENDING_DMA 0x20000000
+#define PCI_SYS_INT_PENDING_PCI 0x10000000
+#define PCI_SYS_INT_PENDING_APSR 0x08000000
+#define PCI_SYS_INT_TARGET_MASK 0x74 /* 32 bits */
+#define PCI_SYS_INT_TARGET_MASK_CLEAR 0x78 /* 32 bits */
+#define PCI_SYS_INT_TARGET_MASK_SET 0x7c /* 32 bits */
+#define PCI_SYS_INT_PENDING_CLEAR 0x83 /* 8 bits */
+#define PCI_SYS_INT_PENDING_CLEAR_ALL 0x80
+#define PCI_SYS_INT_PENDING_CLEAR_PIO 0x40
+#define PCI_SYS_INT_PENDING_CLEAR_DMA 0x20
+#define PCI_SYS_INT_PENDING_CLEAR_PCI 0x10
+#define PCI_IOTLB_CONTROL 0x84 /* 8 bits */
+#define PCI_INT_SELECT_LO 0x88 /* 16 bits */
+#define PCI_ARBITRATION_SELECT 0x8a /* 16 bits */
+#define PCI_INT_SELECT_HI 0x8c /* 16 bits */
+#define PCI_HW_INT_OUTPUT 0x8e /* 16 bits */
+#define PCI_IOTLB_RAM_INPUT 0x90 /* 32 bits */
+#define PCI_IOTLB_CAM_INPUT 0x94 /* 32 bits */
+#define PCI_IOTLB_RAM_OUTPUT 0x98 /* 32 bits */
+#define PCI_IOTLB_CAM_OUTPUT 0x9c /* 32 bits */
+#define PCI_SMBAR0 0xa0 /* 8 bits */
+#define PCI_MSIZE0 0xa1 /* 8 bits */
+#define PCI_PMBAR0 0xa2 /* 8 bits */
+#define PCI_SMBAR1 0xa4 /* 8 bits */
+#define PCI_MSIZE1 0xa5 /* 8 bits */
+#define PCI_PMBAR1 0xa6 /* 8 bits */
+#define PCI_SIBAR 0xa8 /* 8 bits */
+#define PCI_SIBAR_ADDRESS_MASK 0xf
+#define PCI_ISIZE 0xa9 /* 8 bits */
+#define PCI_ISIZE_16M 0xf
+#define PCI_ISIZE_32M 0xe
+#define PCI_ISIZE_64M 0xc
+#define PCI_ISIZE_128M 0x8
+#define PCI_ISIZE_256M 0x0
+#define PCI_PIBAR 0xaa /* 8 bits */
+#define PCI_CPU_COUNTER_LIMIT_HI 0xac /* 32 bits */
+#define PCI_CPU_COUNTER_LIMIT_LO 0xb0 /* 32 bits */
+#define PCI_CPU_COUNTER_LIMIT 0xb4 /* 32 bits */
+#define PCI_SYS_LIMIT 0xb8 /* 32 bits */
+#define PCI_SYS_COUNTER 0xbc /* 32 bits */
+#define PCI_SYS_COUNTER_OVERFLOW (1<<31) /* Limit reached */
+#define PCI_SYS_LIMIT_PSEUDO 0xc0 /* 32 bits */
+#define PCI_USER_TIMER_CONTROL 0xc4 /* 8 bits */
+#define PCI_USER_TIMER_CONFIG 0xc5 /* 8 bits */
+#define PCI_COUNTER_IRQ 0xc6 /* 8 bits */
+#define PCI_COUNTER_IRQ_SET(sys_irq, cpu_irq) ((((sys_irq) & 0xf) << 4) | \
+ ((cpu_irq) & 0xf))
+#define PCI_COUNTER_IRQ_SYS(v) (((v) >> 4) & 0xf)
+#define PCI_COUNTER_IRQ_CPU(v) ((v) & 0xf)
+#define PCI_PIO_ERROR_COMMAND 0xc7 /* 8 bits */
+#define PCI_PIO_ERROR_ADDRESS 0xc8 /* 32 bits */
+#define PCI_IOTLB_ERROR_ADDRESS 0xcc /* 32 bits */
+#define PCI_SYS_STATUS 0xd0 /* 8 bits */
+#define PCI_SYS_STATUS_RESET_ENABLE (1<<0)
+#define PCI_SYS_STATUS_RESET (1<<1)
+#define PCI_SYS_STATUS_WATCHDOG_RESET (1<<4)
+#define PCI_SYS_STATUS_PCI_RESET (1<<5)
+#define PCI_SYS_STATUS_PCI_RESET_ENABLE (1<<6)
+#define PCI_SYS_STATUS_PCI_SATTELITE_MODE (1<<7)
+
+#endif /* !(__SPARC_PCIC_H) */
diff --git a/include/asm-sparc/pconf.h b/include/asm-sparc/pconf.h
new file mode 100644
index 000000000000..d73c1f1c49dc
--- /dev/null
+++ b/include/asm-sparc/pconf.h
@@ -0,0 +1,25 @@
+/* $Id: pconf.h,v 1.3 1996/04/25 06:13:25 davem Exp $
+ * pconf.h: pathconf() and fpathconf() defines for SunOS
+ * system call compatibility.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PCONF_H
+#define _SPARC_PCONF_H
+
+#include <linux/fs.h>
+#include <linux/limits.h>
+
+#define _PCONF_LINK 1 /* Max number of links to an object */
+#define _PCONF_CANON 2 /* TTY input buffer line size */
+#define _PCONF_INPUT 3 /* Biggest packet a tty can imbibe at once */
+#define _PCONF_NAME 4 /* Filename length max */
+#define _PCONF_PATH 5 /* Max size of a pathname */
+#define _PCONF_PIPE 6 /* Buffer size for a pipe */
+#define _PCONF_CHRESTRICT 7 /* Can only root chown files? */
+#define _PCONF_NOTRUNC 8 /* Are pathnames truncated if too big? */
+#define _PCONF_VDISABLE 9 /* Magic char to disable special tty chars */
+#define _PCONF_MAXPCONF 9
+
+#endif /* !(_SPARC_PCONF_H) */
diff --git a/include/asm-sparc/percpu.h b/include/asm-sparc/percpu.h
new file mode 100644
index 000000000000..06066a7aaec3
--- /dev/null
+++ b/include/asm-sparc/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_SPARC_PERCPU__
+#define __ARCH_SPARC_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_SPARC_PERCPU__ */
diff --git a/include/asm-sparc/perfctr.h b/include/asm-sparc/perfctr.h
new file mode 100644
index 000000000000..836873002b75
--- /dev/null
+++ b/include/asm-sparc/perfctr.h
@@ -0,0 +1,173 @@
+/*----------------------------------------
+ PERFORMANCE INSTRUMENTATION
+ Guillaume Thouvenin 08/10/98
+ David S. Miller 10/06/98
+ ---------------------------------------*/
+#ifndef PERF_COUNTER_API
+#define PERF_COUNTER_API
+
+/* sys_perfctr() interface. First arg is operation code
+ * from enumeration below. The meaning of further arguments
+ * are determined by the operation code.
+ *
+ * int sys_perfctr(int opcode, unsigned long arg0,
+ * unsigned long arg1, unsigned long arg2)
+ *
+ * Pointers which are passed by the user are pointers to 64-bit
+ * integers.
+ *
+ * Once enabled, performance counter state is retained until the
+ * process either exits or performs an exec. That is, performance
+ * counters remain enabled for fork/clone children.
+ */
+enum perfctr_opcode {
+ /* Enable UltraSparc performance counters, ARG0 is pointer
+ * to 64-bit accumulator for D0 counter in PIC, ARG1 is pointer
+ * to 64-bit accumulator for D1 counter. ARG2 is a pointer to
+ * the initial PCR register value to use.
+ */
+ PERFCTR_ON,
+
+ /* Disable UltraSparc performance counters. The PCR is written
+ * with zero and the user counter accumulator pointers and
+ * working PCR register value are forgotten.
+ */
+ PERFCTR_OFF,
+
+ /* Add current D0 and D1 PIC values into user pointers given
+ * in PERFCTR_ON operation. The PIC is cleared before returning.
+ */
+ PERFCTR_READ,
+
+ /* Clear the PIC register. */
+ PERFCTR_CLRPIC,
+
+ /* Begin using a new PCR value, the pointer to which is passed
+ * in ARG0. The PIC is also cleared after the new PCR value is
+ * written.
+ */
+ PERFCTR_SETPCR,
+
+ /* Store in pointer given in ARG0 the current PCR register value
+ * being used.
+ */
+ PERFCTR_GETPCR
+};
+
+/* I don't want the kernel's namespace to be polluted with this
+ * stuff when this file is included. --DaveM
+ */
+#ifndef __KERNEL__
+
+#define PRIV 0x00000001
+#define SYS 0x00000002
+#define USR 0x00000004
+
+/* Pic.S0 Selection Bit Field Encoding, Ultra-I/II */
+#define CYCLE_CNT 0x00000000
+#define INSTR_CNT 0x00000010
+#define DISPATCH0_IC_MISS 0x00000020
+#define DISPATCH0_STOREBUF 0x00000030
+#define IC_REF 0x00000080
+#define DC_RD 0x00000090
+#define DC_WR 0x000000A0
+#define LOAD_USE 0x000000B0
+#define EC_REF 0x000000C0
+#define EC_WRITE_HIT_RDO 0x000000D0
+#define EC_SNOOP_INV 0x000000E0
+#define EC_RD_HIT 0x000000F0
+
+/* Pic.S0 Selection Bit Field Encoding, Ultra-III */
+#define US3_CYCLE_CNT 0x00000000
+#define US3_INSTR_CNT 0x00000010
+#define US3_DISPATCH0_IC_MISS 0x00000020
+#define US3_DISPATCH0_BR_TGT 0x00000030
+#define US3_DISPATCH0_2ND_BR 0x00000040
+#define US3_RSTALL_STOREQ 0x00000050
+#define US3_RSTALL_IU_USE 0x00000060
+#define US3_IC_REF 0x00000080
+#define US3_DC_RD 0x00000090
+#define US3_DC_WR 0x000000a0
+#define US3_EC_REF 0x000000c0
+#define US3_EC_WR_HIT_RTO 0x000000d0
+#define US3_EC_SNOOP_INV 0x000000e0
+#define US3_EC_RD_MISS 0x000000f0
+#define US3_PC_PORT0_RD 0x00000100
+#define US3_SI_SNOOP 0x00000110
+#define US3_SI_CIQ_FLOW 0x00000120
+#define US3_SI_OWNED 0x00000130
+#define US3_SW_COUNT_0 0x00000140
+#define US3_IU_BR_MISS_TAKEN 0x00000150
+#define US3_IU_BR_COUNT_TAKEN 0x00000160
+#define US3_DISP_RS_MISPRED 0x00000170
+#define US3_FA_PIPE_COMPL 0x00000180
+#define US3_MC_READS_0 0x00000200
+#define US3_MC_READS_1 0x00000210
+#define US3_MC_READS_2 0x00000220
+#define US3_MC_READS_3 0x00000230
+#define US3_MC_STALLS_0 0x00000240
+#define US3_MC_STALLS_2 0x00000250
+
+/* Pic.S1 Selection Bit Field Encoding, Ultra-I/II */
+#define CYCLE_CNT_D1 0x00000000
+#define INSTR_CNT_D1 0x00000800
+#define DISPATCH0_IC_MISPRED 0x00001000
+#define DISPATCH0_FP_USE 0x00001800
+#define IC_HIT 0x00004000
+#define DC_RD_HIT 0x00004800
+#define DC_WR_HIT 0x00005000
+#define LOAD_USE_RAW 0x00005800
+#define EC_HIT 0x00006000
+#define EC_WB 0x00006800
+#define EC_SNOOP_CB 0x00007000
+#define EC_IT_HIT 0x00007800
+
+/* Pic.S1 Selection Bit Field Encoding, Ultra-III */
+#define US3_CYCLE_CNT_D1 0x00000000
+#define US3_INSTR_CNT_D1 0x00000800
+#define US3_DISPATCH0_MISPRED 0x00001000
+#define US3_IC_MISS_CANCELLED 0x00001800
+#define US3_RE_ENDIAN_MISS 0x00002000
+#define US3_RE_FPU_BYPASS 0x00002800
+#define US3_RE_DC_MISS 0x00003000
+#define US3_RE_EC_MISS 0x00003800
+#define US3_IC_MISS 0x00004000
+#define US3_DC_RD_MISS 0x00004800
+#define US3_DC_WR_MISS 0x00005000
+#define US3_RSTALL_FP_USE 0x00005800
+#define US3_EC_MISSES 0x00006000
+#define US3_EC_WB 0x00006800
+#define US3_EC_SNOOP_CB 0x00007000
+#define US3_EC_IC_MISS 0x00007800
+#define US3_RE_PC_MISS 0x00008000
+#define US3_ITLB_MISS 0x00008800
+#define US3_DTLB_MISS 0x00009000
+#define US3_WC_MISS 0x00009800
+#define US3_WC_SNOOP_CB 0x0000a000
+#define US3_WC_SCRUBBED 0x0000a800
+#define US3_WC_WB_WO_READ 0x0000b000
+#define US3_PC_SOFT_HIT 0x0000c000
+#define US3_PC_SNOOP_INV 0x0000c800
+#define US3_PC_HARD_HIT 0x0000d000
+#define US3_PC_PORT1_RD 0x0000d800
+#define US3_SW_COUNT_1 0x0000e000
+#define US3_IU_STAT_BR_MIS_UNTAKEN 0x0000e800
+#define US3_IU_STAT_BR_COUNT_UNTAKEN 0x0000f000
+#define US3_PC_MS_MISSES 0x0000f800
+#define US3_MC_WRITES_0 0x00010800
+#define US3_MC_WRITES_1 0x00011000
+#define US3_MC_WRITES_2 0x00011800
+#define US3_MC_WRITES_3 0x00012000
+#define US3_MC_STALLS_1 0x00012800
+#define US3_MC_STALLS_3 0x00013000
+#define US3_RE_RAW_MISS 0x00013800
+#define US3_FM_PIPE_COMPLETION 0x00014000
+
+struct vcounter_struct {
+ unsigned long long vcnt0;
+ unsigned long long vcnt1;
+};
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(PERF_COUNTER_API) */
diff --git a/include/asm-sparc/pgalloc.h b/include/asm-sparc/pgalloc.h
new file mode 100644
index 000000000000..126800acd10d
--- /dev/null
+++ b/include/asm-sparc/pgalloc.h
@@ -0,0 +1,69 @@
+/* $Id: pgalloc.h,v 1.16 2001/12/21 04:56:17 davem Exp $ */
+#ifndef _SPARC_PGALLOC_H
+#define _SPARC_PGALLOC_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+#include <asm/page.h>
+#include <asm/btfixup.h>
+
+struct page;
+
+extern struct pgtable_cache_struct {
+ unsigned long *pgd_cache;
+ unsigned long *pte_cache;
+ unsigned long pgtable_cache_sz;
+ unsigned long pgd_cache_sz;
+} pgt_quicklists;
+#define pgd_quicklist (pgt_quicklists.pgd_cache)
+#define pmd_quicklist ((unsigned long *)0)
+#define pte_quicklist (pgt_quicklists.pte_cache)
+#define pgtable_cache_size (pgt_quicklists.pgtable_cache_sz)
+#define pgd_cache_size (pgt_quicklists.pgd_cache_sz)
+
+extern void check_pgt_cache(void);
+BTFIXUPDEF_CALL(void, do_check_pgt_cache, int, int)
+#define do_check_pgt_cache(low,high) BTFIXUP_CALL(do_check_pgt_cache)(low,high)
+
+BTFIXUPDEF_CALL(pgd_t *, get_pgd_fast, void)
+#define get_pgd_fast() BTFIXUP_CALL(get_pgd_fast)()
+
+BTFIXUPDEF_CALL(void, free_pgd_fast, pgd_t *)
+#define free_pgd_fast(pgd) BTFIXUP_CALL(free_pgd_fast)(pgd)
+
+#define pgd_free(pgd) free_pgd_fast(pgd)
+#define pgd_alloc(mm) get_pgd_fast()
+
+BTFIXUPDEF_CALL(void, pgd_set, pgd_t *, pmd_t *)
+#define pgd_set(pgdp,pmdp) BTFIXUP_CALL(pgd_set)(pgdp,pmdp)
+#define pgd_populate(MM, PGD, PMD) pgd_set(PGD, PMD)
+
+BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long)
+#define pmd_alloc_one(mm, address) BTFIXUP_CALL(pmd_alloc_one)(mm, address)
+
+BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *)
+#define free_pmd_fast(pmd) BTFIXUP_CALL(free_pmd_fast)(pmd)
+
+#define pmd_free(pmd) free_pmd_fast(pmd)
+#define __pmd_free_tlb(tlb, pmd) pmd_free(pmd)
+
+BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *)
+#define pmd_populate(MM, PMD, PTE) BTFIXUP_CALL(pmd_populate)(PMD, PTE)
+BTFIXUPDEF_CALL(void, pmd_set, pmd_t *, pte_t *)
+#define pmd_populate_kernel(MM, PMD, PTE) BTFIXUP_CALL(pmd_set)(PMD, PTE)
+
+BTFIXUPDEF_CALL(struct page *, pte_alloc_one, struct mm_struct *, unsigned long)
+#define pte_alloc_one(mm, address) BTFIXUP_CALL(pte_alloc_one)(mm, address)
+BTFIXUPDEF_CALL(pte_t *, pte_alloc_one_kernel, struct mm_struct *, unsigned long)
+#define pte_alloc_one_kernel(mm, addr) BTFIXUP_CALL(pte_alloc_one_kernel)(mm, addr)
+
+BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *)
+#define pte_free_kernel(pte) BTFIXUP_CALL(free_pte_fast)(pte)
+
+BTFIXUPDEF_CALL(void, pte_free, struct page *)
+#define pte_free(pte) BTFIXUP_CALL(pte_free)(pte)
+#define __pte_free_tlb(tlb, pte) pte_free(pte)
+
+#endif /* _SPARC_PGALLOC_H */
diff --git a/include/asm-sparc/pgtable.h b/include/asm-sparc/pgtable.h
new file mode 100644
index 000000000000..373a6c327590
--- /dev/null
+++ b/include/asm-sparc/pgtable.h
@@ -0,0 +1,465 @@
+/* $Id: pgtable.h,v 1.110 2001/12/21 04:56:17 davem Exp $ */
+#ifndef _SPARC_PGTABLE_H
+#define _SPARC_PGTABLE_H
+
+/* asm-sparc/pgtable.h: Defines and functions used to work
+ * with Sparc page tables.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <linux/swap.h>
+#include <asm/types.h>
+#ifdef CONFIG_SUN4
+#include <asm/pgtsun4.h>
+#else
+#include <asm/pgtsun4c.h>
+#endif
+#include <asm/pgtsrmmu.h>
+#include <asm/vac-ops.h>
+#include <asm/oplib.h>
+#include <asm/btfixup.h>
+#include <asm/system.h>
+
+#ifndef __ASSEMBLY__
+
+struct vm_area_struct;
+struct page;
+
+extern void load_mmu(void);
+extern unsigned long calc_highpages(void);
+
+BTFIXUPDEF_SIMM13(pgdir_shift)
+BTFIXUPDEF_SETHI(pgdir_size)
+BTFIXUPDEF_SETHI(pgdir_mask)
+
+BTFIXUPDEF_SIMM13(ptrs_per_pmd)
+BTFIXUPDEF_SIMM13(ptrs_per_pgd)
+BTFIXUPDEF_SIMM13(user_ptrs_per_pgd)
+
+#define pte_ERROR(e) __builtin_trap()
+#define pmd_ERROR(e) __builtin_trap()
+#define pgd_ERROR(e) __builtin_trap()
+
+BTFIXUPDEF_INT(page_none)
+BTFIXUPDEF_INT(page_shared)
+BTFIXUPDEF_INT(page_copy)
+BTFIXUPDEF_INT(page_readonly)
+BTFIXUPDEF_INT(page_kernel)
+
+#define PMD_SHIFT SUN4C_PMD_SHIFT
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+#define PMD_ALIGN(__addr) (((__addr) + ~PMD_MASK) & PMD_MASK)
+#define PGDIR_SHIFT BTFIXUP_SIMM13(pgdir_shift)
+#define PGDIR_SIZE BTFIXUP_SETHI(pgdir_size)
+#define PGDIR_MASK BTFIXUP_SETHI(pgdir_mask)
+#define PTRS_PER_PTE 1024
+#define PTRS_PER_PMD BTFIXUP_SIMM13(ptrs_per_pmd)
+#define PTRS_PER_PGD BTFIXUP_SIMM13(ptrs_per_pgd)
+#define USER_PTRS_PER_PGD BTFIXUP_SIMM13(user_ptrs_per_pgd)
+#define FIRST_USER_PGD_NR 0
+#define PTE_SIZE (PTRS_PER_PTE*4)
+
+#define PAGE_NONE __pgprot(BTFIXUP_INT(page_none))
+#define PAGE_SHARED __pgprot(BTFIXUP_INT(page_shared))
+#define PAGE_COPY __pgprot(BTFIXUP_INT(page_copy))
+#define PAGE_READONLY __pgprot(BTFIXUP_INT(page_readonly))
+
+extern unsigned long page_kernel;
+
+#ifdef MODULE
+#define PAGE_KERNEL page_kernel
+#else
+#define PAGE_KERNEL __pgprot(BTFIXUP_INT(page_kernel))
+#endif
+
+/* Top-level page directory */
+extern pgd_t swapper_pg_dir[1024];
+
+/* Page table for 0-4MB for everybody, on the Sparc this
+ * holds the same as on the i386.
+ */
+extern pte_t pg0[1024];
+extern pte_t pg1[1024];
+extern pte_t pg2[1024];
+extern pte_t pg3[1024];
+
+extern unsigned long ptr_in_current_pgd;
+
+/* Here is a trick, since mmap.c need the initializer elements for
+ * protection_map[] to be constant at compile time, I set the following
+ * to all zeros. I set it to the real values after I link in the
+ * appropriate MMU page table routines at boot time.
+ */
+#define __P000 __pgprot(0)
+#define __P001 __pgprot(0)
+#define __P010 __pgprot(0)
+#define __P011 __pgprot(0)
+#define __P100 __pgprot(0)
+#define __P101 __pgprot(0)
+#define __P110 __pgprot(0)
+#define __P111 __pgprot(0)
+
+#define __S000 __pgprot(0)
+#define __S001 __pgprot(0)
+#define __S010 __pgprot(0)
+#define __S011 __pgprot(0)
+#define __S100 __pgprot(0)
+#define __S101 __pgprot(0)
+#define __S110 __pgprot(0)
+#define __S111 __pgprot(0)
+
+extern int num_contexts;
+
+/* First physical page can be anywhere, the following is needed so that
+ * va-->pa and vice versa conversions work properly without performance
+ * hit for all __pa()/__va() operations.
+ */
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+
+/*
+ * BAD_PAGETABLE is used when we need a bogus page-table, while
+ * BAD_PAGE is used for a bogus page.
+ *
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern pte_t * __bad_pagetable(void);
+extern pte_t __bad_page(void);
+extern unsigned long empty_zero_page;
+
+#define BAD_PAGETABLE __bad_pagetable()
+#define BAD_PAGE __bad_page()
+#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
+
+/*
+ */
+BTFIXUPDEF_CALL_CONST(struct page *, pmd_page, pmd_t)
+BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page, pgd_t)
+
+#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
+#define pgd_page(pgd) BTFIXUP_CALL(pgd_page)(pgd)
+
+BTFIXUPDEF_SETHI(none_mask)
+BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
+BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
+BTFIXUPDEF_CALL(int, pte_read, pte_t)
+
+extern __inline__ int pte_none(pte_t pte)
+{
+ return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
+#define pte_clear(mm,addr,pte) BTFIXUP_CALL(pte_clear)(pte)
+#define pte_read(pte) BTFIXUP_CALL(pte_read)(pte)
+
+BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t)
+BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t)
+BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *)
+
+extern __inline__ int pmd_none(pmd_t pmd)
+{
+ return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
+#define pmd_present(pmd) BTFIXUP_CALL(pmd_present)(pmd)
+#define pmd_clear(pmd) BTFIXUP_CALL(pmd_clear)(pmd)
+
+BTFIXUPDEF_CALL_CONST(int, pgd_none, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_bad, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_present, pgd_t)
+BTFIXUPDEF_CALL(void, pgd_clear, pgd_t *)
+
+#define pgd_none(pgd) BTFIXUP_CALL(pgd_none)(pgd)
+#define pgd_bad(pgd) BTFIXUP_CALL(pgd_bad)(pgd)
+#define pgd_present(pgd) BTFIXUP_CALL(pgd_present)(pgd)
+#define pgd_clear(pgd) BTFIXUP_CALL(pgd_clear)(pgd)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+BTFIXUPDEF_HALF(pte_writei)
+BTFIXUPDEF_HALF(pte_dirtyi)
+BTFIXUPDEF_HALF(pte_youngi)
+
+extern int pte_write(pte_t pte) __attribute_const__;
+extern __inline__ int pte_write(pte_t pte)
+{
+ return pte_val(pte) & BTFIXUP_HALF(pte_writei);
+}
+
+extern int pte_dirty(pte_t pte) __attribute_const__;
+extern __inline__ int pte_dirty(pte_t pte)
+{
+ return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi);
+}
+
+extern int pte_young(pte_t pte) __attribute_const__;
+extern __inline__ int pte_young(pte_t pte)
+{
+ return pte_val(pte) & BTFIXUP_HALF(pte_youngi);
+}
+
+/*
+ * The following only work if pte_present() is not true.
+ */
+BTFIXUPDEF_HALF(pte_filei)
+
+extern int pte_file(pte_t pte) __attribute_const__;
+extern __inline__ int pte_file(pte_t pte)
+{
+ return pte_val(pte) & BTFIXUP_HALF(pte_filei);
+}
+
+/*
+ */
+BTFIXUPDEF_HALF(pte_wrprotecti)
+BTFIXUPDEF_HALF(pte_mkcleani)
+BTFIXUPDEF_HALF(pte_mkoldi)
+
+extern pte_t pte_wrprotect(pte_t pte) __attribute_const__;
+extern __inline__ pte_t pte_wrprotect(pte_t pte)
+{
+ return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti));
+}
+
+extern pte_t pte_mkclean(pte_t pte) __attribute_const__;
+extern __inline__ pte_t pte_mkclean(pte_t pte)
+{
+ return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani));
+}
+
+extern pte_t pte_mkold(pte_t pte) __attribute_const__;
+extern __inline__ pte_t pte_mkold(pte_t pte)
+{
+ return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi));
+}
+
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkwrite, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkdirty, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkyoung, pte_t)
+
+#define pte_mkwrite(pte) BTFIXUP_CALL(pte_mkwrite)(pte)
+#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte)
+#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte)
+
+#define page_pte_prot(page, prot) mk_pte(page, prot)
+#define page_pte(page) mk_pte(page, __pgprot(0))
+#define pfn_pte(pfn, prot) mk_pte(pfn_to_page(pfn), prot)
+
+BTFIXUPDEF_CALL(unsigned long, pte_pfn, pte_t)
+#define pte_pfn(pte) BTFIXUP_CALL(pte_pfn)(pte)
+#define pte_page(pte) pfn_to_page(pte_pfn(pte))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte, struct page *, pgprot_t)
+
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_phys, unsigned long, pgprot_t)
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int)
+
+#define mk_pte(page,pgprot) BTFIXUP_CALL(mk_pte)(page,pgprot)
+#define mk_pte_phys(page,pgprot) BTFIXUP_CALL(mk_pte_phys)(page,pgprot)
+#define mk_pte_io(page,pgprot,space) BTFIXUP_CALL(mk_pte_io)(page,pgprot,space)
+
+BTFIXUPDEF_INT(pte_modify_mask)
+
+extern pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__;
+extern __inline__ pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) |
+ pgprot_val(newprot));
+}
+
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+BTFIXUPDEF_CALL(pmd_t *, pmd_offset, pgd_t *, unsigned long)
+#define pmd_offset(dir,addr) BTFIXUP_CALL(pmd_offset)(dir,addr)
+
+/* Find an entry in the third-level page table.. */
+BTFIXUPDEF_CALL(pte_t *, pte_offset_kernel, pmd_t *, unsigned long)
+#define pte_offset_kernel(dir,addr) BTFIXUP_CALL(pte_offset_kernel)(dir,addr)
+
+/*
+ * This shortcut works on sun4m (and sun4d) because the nocache area is static,
+ * and sun4c is guaranteed to have no highmem anyway.
+ */
+#define pte_offset_map(d, a) pte_offset_kernel(d,a)
+#define pte_offset_map_nested(d, a) pte_offset_kernel(d,a)
+
+#define pte_unmap(pte) do{}while(0)
+#define pte_unmap_nested(pte) do{}while(0)
+
+/* The permissions for pgprot_val to make a page mapped on the obio space */
+extern unsigned int pg_iobits;
+
+/* Certain architectures need to do special things when pte's
+ * within a page table are directly modified. Thus, the following
+ * hook is made available.
+ */
+
+BTFIXUPDEF_CALL(void, set_pte, pte_t *, pte_t)
+
+#define set_pte(ptep,pteval) BTFIXUP_CALL(set_pte)(ptep,pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+struct seq_file;
+BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *)
+
+#define mmu_info(p) BTFIXUP_CALL(mmu_info)(p)
+
+/* Fault handler stuff... */
+#define FAULT_CODE_PROT 0x1
+#define FAULT_CODE_WRITE 0x2
+#define FAULT_CODE_USER 0x4
+
+BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
+
+#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
+
+BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
+ unsigned long, unsigned int)
+BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int)
+#define sparc_mapiorange(bus,pa,va,len) BTFIXUP_CALL(sparc_mapiorange)(bus,pa,va,len)
+#define sparc_unmapiorange(va,len) BTFIXUP_CALL(sparc_unmapiorange)(va,len)
+
+extern int invalid_segment;
+
+/* Encode and de-code a swap entry */
+BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t)
+BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t)
+BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long)
+
+#define __swp_type(__x) BTFIXUP_CALL(__swp_type)(__x)
+#define __swp_offset(__x) BTFIXUP_CALL(__swp_offset)(__x)
+#define __swp_entry(__type,__off) BTFIXUP_CALL(__swp_entry)(__type,__off)
+
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+/* file-offset-in-pte helpers */
+BTFIXUPDEF_CALL(unsigned long, pte_to_pgoff, pte_t pte);
+BTFIXUPDEF_CALL(pte_t, pgoff_to_pte, unsigned long pgoff);
+
+#define pte_to_pgoff(pte) BTFIXUP_CALL(pte_to_pgoff)(pte)
+#define pgoff_to_pte(off) BTFIXUP_CALL(pgoff_to_pte)(off)
+
+/*
+ * This is made a constant because mm/fremap.c required a constant.
+ * Note that layout of these bits is different between sun4c.c and srmmu.c.
+ */
+#define PTE_FILE_MAX_BITS 24
+
+/*
+ */
+struct ctx_list {
+ struct ctx_list *next;
+ struct ctx_list *prev;
+ unsigned int ctx_number;
+ struct mm_struct *ctx_mm;
+};
+
+extern struct ctx_list *ctx_list_pool; /* Dynamically allocated */
+extern struct ctx_list ctx_free; /* Head of free list */
+extern struct ctx_list ctx_used; /* Head of used contexts list */
+
+#define NO_CONTEXT -1
+
+extern __inline__ void remove_from_ctx_list(struct ctx_list *entry)
+{
+ entry->next->prev = entry->prev;
+ entry->prev->next = entry->next;
+}
+
+extern __inline__ void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry)
+{
+ entry->next = head;
+ (entry->prev = head->prev)->next = entry;
+ head->prev = entry;
+}
+#define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry)
+#define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry)
+
+extern __inline__ unsigned long
+__get_phys (unsigned long addr)
+{
+ switch (sparc_cpu_model){
+ case sun4:
+ case sun4c:
+ return sun4c_get_pte (addr) << PAGE_SHIFT;
+ case sun4m:
+ case sun4d:
+ return ((srmmu_get_pte (addr) & 0xffffff00) << 4);
+ default:
+ return 0;
+ }
+}
+
+extern __inline__ int
+__get_iospace (unsigned long addr)
+{
+ switch (sparc_cpu_model){
+ case sun4:
+ case sun4c:
+ return -1; /* Don't check iospace on sun4c */
+ case sun4m:
+ case sun4d:
+ return (srmmu_get_pte (addr) >> 28);
+ default:
+ return -1;
+ }
+}
+
+extern unsigned long *sparc_valid_addr_bitmap;
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr) \
+ (test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
+
+extern int io_remap_page_range(struct vm_area_struct *vma,
+ unsigned long from, unsigned long to,
+ unsigned long size, pgprot_t prot, int space);
+extern int io_remap_pfn_range(struct vm_area_struct *vma,
+ unsigned long from, unsigned long pfn,
+ unsigned long size, pgprot_t prot);
+
+/*
+ * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
+ * its high 4 bits. These macros/functions put it there or get it from there.
+ */
+#define MK_IOSPACE_PFN(space, pfn) (pfn | (space << (BITS_PER_LONG - 4)))
+#define GET_IOSPACE(pfn) (pfn >> (BITS_PER_LONG - 4))
+#define GET_PFN(pfn) (pfn & 0x0fffffffUL)
+
+#include <asm-generic/pgtable.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+/* We provide our own get_unmapped_area to cope with VA holes for userland */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init() do { } while (0)
+
+#endif /* !(_SPARC_PGTABLE_H) */
diff --git a/include/asm-sparc/pgtsrmmu.h b/include/asm-sparc/pgtsrmmu.h
new file mode 100644
index 000000000000..ee3b9d93187c
--- /dev/null
+++ b/include/asm-sparc/pgtsrmmu.h
@@ -0,0 +1,298 @@
+/* $Id: pgtsrmmu.h,v 1.31 2000/07/16 21:48:52 anton Exp $
+ * pgtsrmmu.h: SRMMU page table defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PGTSRMMU_H
+#define _SPARC_PGTSRMMU_H
+
+#include <asm/page.h>
+
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h> /* TI_UWINMASK for WINDOW_FLUSH */
+#endif
+
+/* Number of contexts is implementation-dependent; 64k is the most we support */
+#define SRMMU_MAX_CONTEXTS 65536
+
+/* PMD_SHIFT determines the size of the area a second-level page table entry can map */
+#define SRMMU_REAL_PMD_SHIFT 18
+#define SRMMU_REAL_PMD_SIZE (1UL << SRMMU_REAL_PMD_SHIFT)
+#define SRMMU_REAL_PMD_MASK (~(SRMMU_REAL_PMD_SIZE-1))
+#define SRMMU_REAL_PMD_ALIGN(__addr) (((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK)
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SRMMU_PGDIR_SHIFT 24
+#define SRMMU_PGDIR_SIZE (1UL << SRMMU_PGDIR_SHIFT)
+#define SRMMU_PGDIR_MASK (~(SRMMU_PGDIR_SIZE-1))
+#define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK)
+
+#define SRMMU_REAL_PTRS_PER_PTE 64
+#define SRMMU_REAL_PTRS_PER_PMD 64
+#define SRMMU_PTRS_PER_PGD 256
+
+#define SRMMU_REAL_PTE_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PTE*4)
+#define SRMMU_PMD_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PMD*4)
+#define SRMMU_PGD_TABLE_SIZE (SRMMU_PTRS_PER_PGD*4)
+
+/*
+ * To support pagetables in highmem, Linux introduces APIs which
+ * return struct page* and generally manipulate page tables when
+ * they are not mapped into kernel space. Our hardware page tables
+ * are smaller than pages. We lump hardware tabes into big, page sized
+ * software tables.
+ *
+ * PMD_SHIFT determines the size of the area a second-level page table entry
+ * can map, and our pmd_t is 16 times larger than normal. The values which
+ * were once defined here are now generic for 4c and srmmu, so they're
+ * found in pgtable.h.
+ */
+#define SRMMU_PTRS_PER_PMD 4
+
+/* Definition of the values in the ET field of PTD's and PTE's */
+#define SRMMU_ET_MASK 0x3
+#define SRMMU_ET_INVALID 0x0
+#define SRMMU_ET_PTD 0x1
+#define SRMMU_ET_PTE 0x2
+#define SRMMU_ET_REPTE 0x3 /* AIEEE, SuperSparc II reverse endian page! */
+
+/* Physical page extraction from PTP's and PTE's. */
+#define SRMMU_CTX_PMASK 0xfffffff0
+#define SRMMU_PTD_PMASK 0xfffffff0
+#define SRMMU_PTE_PMASK 0xffffff00
+
+/* The pte non-page bits. Some notes:
+ * 1) cache, dirty, valid, and ref are frobbable
+ * for both supervisor and user pages.
+ * 2) exec and write will only give the desired effect
+ * on user pages
+ * 3) use priv and priv_readonly for changing the
+ * characteristics of supervisor ptes
+ */
+#define SRMMU_CACHE 0x80
+#define SRMMU_DIRTY 0x40
+#define SRMMU_REF 0x20
+#define SRMMU_NOREAD 0x10
+#define SRMMU_EXEC 0x08
+#define SRMMU_WRITE 0x04
+#define SRMMU_VALID 0x02 /* SRMMU_ET_PTE */
+#define SRMMU_PRIV 0x1c
+#define SRMMU_PRIV_RDONLY 0x18
+
+#define SRMMU_FILE 0x40 /* Implemented in software */
+
+#define SRMMU_PTE_FILE_SHIFT 8 /* == 32-PTE_FILE_MAX_BITS */
+
+#define SRMMU_CHG_MASK (0xffffff00 | SRMMU_REF | SRMMU_DIRTY)
+
+/* SRMMU swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset. This gives us
+ * 32 swapfiles of 4GB each. Encoding looks like:
+ *
+ * oooooooooooooooooootttttRRRRRRRR
+ * fedcba9876543210fedcba9876543210
+ *
+ * The bottom 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SRMMU_SWP_TYPE_MASK 0x1f
+#define SRMMU_SWP_TYPE_SHIFT SRMMU_PTE_FILE_SHIFT
+#define SRMMU_SWP_OFF_MASK 0x7ffff
+#define SRMMU_SWP_OFF_SHIFT (SRMMU_PTE_FILE_SHIFT + 5)
+
+/* Some day I will implement true fine grained access bits for
+ * user pages because the SRMMU gives us the capabilities to
+ * enforce all the protection levels that vma's can have.
+ * XXX But for now...
+ */
+#define SRMMU_PAGE_NONE __pgprot(SRMMU_CACHE | \
+ SRMMU_PRIV | SRMMU_REF)
+#define SRMMU_PAGE_SHARED __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+ SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF)
+#define SRMMU_PAGE_COPY __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+ SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_RDONLY __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+ SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_KERNEL __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \
+ SRMMU_DIRTY | SRMMU_REF)
+
+/* SRMMU Register addresses in ASI 0x4. These are valid for all
+ * current SRMMU implementations that exist.
+ */
+#define SRMMU_CTRL_REG 0x00000000
+#define SRMMU_CTXTBL_PTR 0x00000100
+#define SRMMU_CTX_REG 0x00000200
+#define SRMMU_FAULT_STATUS 0x00000300
+#define SRMMU_FAULT_ADDR 0x00000400
+
+#define WINDOW_FLUSH(tmp1, tmp2) \
+ mov 0, tmp1; \
+98: ld [%g6 + TI_UWINMASK], tmp2; \
+ orcc %g0, tmp2, %g0; \
+ add tmp1, 1, tmp1; \
+ bne 98b; \
+ save %sp, -64, %sp; \
+99: subcc tmp1, 1, tmp1; \
+ bne 99b; \
+ restore %g0, %g0, %g0;
+
+#ifndef __ASSEMBLY__
+
+/* This makes sense. Honest it does - Anton */
+/* XXX Yes but it's ugly as sin. FIXME. -KMW */
+extern void *srmmu_nocache_pool;
+#define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool))
+#define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR)
+#define __nocache_fix(VADDR) __va(__nocache_pa(VADDR))
+
+/* Accessing the MMU control register. */
+extern __inline__ unsigned int srmmu_get_mmureg(void)
+{
+ unsigned int retval;
+ __asm__ __volatile__("lda [%%g0] %1, %0\n\t" :
+ "=r" (retval) :
+ "i" (ASI_M_MMUREGS));
+ return retval;
+}
+
+extern __inline__ void srmmu_set_mmureg(unsigned long regval)
+{
+ __asm__ __volatile__("sta %0, [%%g0] %1\n\t" : :
+ "r" (regval), "i" (ASI_M_MMUREGS) : "memory");
+
+}
+
+extern __inline__ void srmmu_set_ctable_ptr(unsigned long paddr)
+{
+ paddr = ((paddr >> 4) & SRMMU_CTX_PMASK);
+ __asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+ "r" (paddr), "r" (SRMMU_CTXTBL_PTR),
+ "i" (ASI_M_MMUREGS) :
+ "memory");
+}
+
+extern __inline__ unsigned long srmmu_get_ctable_ptr(void)
+{
+ unsigned int retval;
+
+ __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+ "=r" (retval) :
+ "r" (SRMMU_CTXTBL_PTR),
+ "i" (ASI_M_MMUREGS));
+ return (retval & SRMMU_CTX_PMASK) << 4;
+}
+
+extern __inline__ void srmmu_set_context(int context)
+{
+ __asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+ "r" (context), "r" (SRMMU_CTX_REG),
+ "i" (ASI_M_MMUREGS) : "memory");
+}
+
+extern __inline__ int srmmu_get_context(void)
+{
+ register int retval;
+ __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+ "=r" (retval) :
+ "r" (SRMMU_CTX_REG),
+ "i" (ASI_M_MMUREGS));
+ return retval;
+}
+
+extern __inline__ unsigned int srmmu_get_fstatus(void)
+{
+ unsigned int retval;
+
+ __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+ "=r" (retval) :
+ "r" (SRMMU_FAULT_STATUS), "i" (ASI_M_MMUREGS));
+ return retval;
+}
+
+extern __inline__ unsigned int srmmu_get_faddr(void)
+{
+ unsigned int retval;
+
+ __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+ "=r" (retval) :
+ "r" (SRMMU_FAULT_ADDR), "i" (ASI_M_MMUREGS));
+ return retval;
+}
+
+/* This is guaranteed on all SRMMU's. */
+extern __inline__ void srmmu_flush_whole_tlb(void)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+ "r" (0x400), /* Flush entire TLB!! */
+ "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+/* These flush types are not available on all chips... */
+extern __inline__ void srmmu_flush_tlb_ctx(void)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+ "r" (0x300), /* Flush TLB ctx.. */
+ "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+extern __inline__ void srmmu_flush_tlb_region(unsigned long addr)
+{
+ addr &= SRMMU_PGDIR_MASK;
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+ "r" (addr | 0x200), /* Flush TLB region.. */
+ "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+
+extern __inline__ void srmmu_flush_tlb_segment(unsigned long addr)
+{
+ addr &= SRMMU_REAL_PMD_MASK;
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+ "r" (addr | 0x100), /* Flush TLB segment.. */
+ "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+extern __inline__ void srmmu_flush_tlb_page(unsigned long page)
+{
+ page &= PAGE_MASK;
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+ "r" (page), /* Flush TLB page.. */
+ "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+extern __inline__ unsigned long srmmu_hwprobe(unsigned long vaddr)
+{
+ unsigned long retval;
+
+ vaddr &= PAGE_MASK;
+ __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+ "=r" (retval) :
+ "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
+
+ return retval;
+}
+
+extern __inline__ int
+srmmu_get_pte (unsigned long addr)
+{
+ register unsigned long entry;
+
+ __asm__ __volatile__("\n\tlda [%1] %2,%0\n\t" :
+ "=r" (entry):
+ "r" ((addr & 0xfffff000) | 0x400), "i" (ASI_M_FLUSH_PROBE));
+ return entry;
+}
+
+extern unsigned long (*srmmu_read_physical)(unsigned long paddr);
+extern void (*srmmu_write_physical)(unsigned long paddr, unsigned long word);
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSRMMU_H) */
diff --git a/include/asm-sparc/pgtsun4.h b/include/asm-sparc/pgtsun4.h
new file mode 100644
index 000000000000..60bda107f206
--- /dev/null
+++ b/include/asm-sparc/pgtsun4.h
@@ -0,0 +1,171 @@
+/* $Id: pgtsun4.h,v 1.5 2000/06/05 06:08:46 anton Exp $
+ * pgtsun4.h: Sun4 specific pgtable.h defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_PGTSUN4C_H
+#define _SPARC_PGTSUN4C_H
+
+#include <asm/contregs.h>
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define SUN4C_PMD_SHIFT 23
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SUN4C_PGDIR_SHIFT 23
+#define SUN4C_PGDIR_SIZE (1UL << SUN4C_PGDIR_SHIFT)
+#define SUN4C_PGDIR_MASK (~(SUN4C_PGDIR_SIZE-1))
+#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK)
+
+/* To represent how the sun4c mmu really lays things out. */
+#define SUN4C_REAL_PGDIR_SHIFT 18
+#define SUN4C_REAL_PGDIR_SIZE (1UL << SUN4C_REAL_PGDIR_SHIFT)
+#define SUN4C_REAL_PGDIR_MASK (~(SUN4C_REAL_PGDIR_SIZE-1))
+#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK)
+
+/* 19 bit PFN on sun4 */
+#define SUN4C_PFN_MASK 0x7ffff
+
+/* Don't increase these unless the structures in sun4c.c are fixed */
+#define SUN4C_MAX_SEGMAPS 256
+#define SUN4C_MAX_CONTEXTS 16
+
+/*
+ * To be efficient, and not have to worry about allocating such
+ * a huge pgd, we make the kernel sun4c tables each hold 1024
+ * entries and the pgd similarly just like the i386 tables.
+ */
+#define SUN4C_PTRS_PER_PTE 1024
+#define SUN4C_PTRS_PER_PMD 1
+#define SUN4C_PTRS_PER_PGD 1024
+
+/*
+ * Sparc SUN4C pte fields.
+ */
+#define _SUN4C_PAGE_VALID 0x80000000
+#define _SUN4C_PAGE_SILENT_READ 0x80000000 /* synonym */
+#define _SUN4C_PAGE_DIRTY 0x40000000
+#define _SUN4C_PAGE_SILENT_WRITE 0x40000000 /* synonym */
+#define _SUN4C_PAGE_PRIV 0x20000000 /* privileged page */
+#define _SUN4C_PAGE_NOCACHE 0x10000000 /* non-cacheable page */
+#define _SUN4C_PAGE_PRESENT 0x08000000 /* implemented in software */
+#define _SUN4C_PAGE_IO 0x04000000 /* I/O page */
+#define _SUN4C_PAGE_FILE 0x02000000 /* implemented in software */
+#define _SUN4C_PAGE_READ 0x00800000 /* implemented in software */
+#define _SUN4C_PAGE_WRITE 0x00400000 /* implemented in software */
+#define _SUN4C_PAGE_ACCESSED 0x00200000 /* implemented in software */
+#define _SUN4C_PAGE_MODIFIED 0x00100000 /* implemented in software */
+
+#define _SUN4C_READABLE (_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\
+ _SUN4C_PAGE_ACCESSED)
+#define _SUN4C_WRITEABLE (_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\
+ _SUN4C_PAGE_MODIFIED)
+
+#define _SUN4C_PAGE_CHG_MASK (0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED)
+
+#define SUN4C_PAGE_NONE __pgprot(_SUN4C_PAGE_PRESENT)
+#define SUN4C_PAGE_SHARED __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\
+ _SUN4C_PAGE_WRITE)
+#define SUN4C_PAGE_COPY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_READONLY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_KERNEL __pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
+ _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
+
+/* SUN4C swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset. This gives us
+ * 32 swapfiles of 4GB each. Encoding looks like:
+ *
+ * RRRRRRRRooooooooooooooooooottttt
+ * fedcba9876543210fedcba9876543210
+ *
+ * The top 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SUN4C_SWP_TYPE_MASK 0x1f
+#define SUN4C_SWP_OFF_MASK 0x7ffff
+#define SUN4C_SWP_OFF_SHIFT 5
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long sun4c_get_synchronous_error(void)
+{
+ unsigned long sync_err;
+
+ __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+ "=r" (sync_err) :
+ "r" (AC_SYNC_ERR), "i" (ASI_CONTROL));
+ return sync_err;
+}
+
+static inline unsigned long sun4c_get_synchronous_address(void)
+{
+ unsigned long sync_addr;
+
+ __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+ "=r" (sync_addr) :
+ "r" (AC_SYNC_VA), "i" (ASI_CONTROL));
+ return sync_addr;
+}
+
+/* SUN4 pte, segmap, and context manipulation */
+static inline unsigned long sun4c_get_segmap(unsigned long addr)
+{
+ register unsigned long entry;
+
+ __asm__ __volatile__("\n\tlduha [%1] %2, %0\n\t" :
+ "=r" (entry) :
+ "r" (addr), "i" (ASI_SEGMAP));
+ return entry;
+}
+
+static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry)
+{
+ __asm__ __volatile__("\n\tstha %1, [%0] %2; nop; nop; nop;\n\t" : :
+ "r" (addr), "r" (entry),
+ "i" (ASI_SEGMAP)
+ : "memory");
+}
+
+static inline unsigned long sun4c_get_pte(unsigned long addr)
+{
+ register unsigned long entry;
+
+ __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" :
+ "=r" (entry) :
+ "r" (addr), "i" (ASI_PTE));
+ return entry;
+}
+
+static inline void sun4c_put_pte(unsigned long addr, unsigned long entry)
+{
+ __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : :
+ "r" (addr),
+ "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE)
+ : "memory");
+}
+
+static inline int sun4c_get_context(void)
+{
+ register int ctx;
+
+ __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
+ "=r" (ctx) :
+ "r" (AC_CONTEXT), "i" (ASI_CONTROL));
+
+ return ctx;
+}
+
+static inline int sun4c_set_context(int ctx)
+{
+ __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : :
+ "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL)
+ : "memory");
+
+ return ctx;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSUN4_H) */
diff --git a/include/asm-sparc/pgtsun4c.h b/include/asm-sparc/pgtsun4c.h
new file mode 100644
index 000000000000..f53b6dbc5fe3
--- /dev/null
+++ b/include/asm-sparc/pgtsun4c.h
@@ -0,0 +1,172 @@
+/* $Id: pgtsun4c.h,v 1.37 2000/06/05 06:08:46 anton Exp $
+ * pgtsun4c.h: Sun4c specific pgtable.h defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_PGTSUN4C_H
+#define _SPARC_PGTSUN4C_H
+
+#include <asm/contregs.h>
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define SUN4C_PMD_SHIFT 22
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SUN4C_PGDIR_SHIFT 22
+#define SUN4C_PGDIR_SIZE (1UL << SUN4C_PGDIR_SHIFT)
+#define SUN4C_PGDIR_MASK (~(SUN4C_PGDIR_SIZE-1))
+#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK)
+
+/* To represent how the sun4c mmu really lays things out. */
+#define SUN4C_REAL_PGDIR_SHIFT 18
+#define SUN4C_REAL_PGDIR_SIZE (1UL << SUN4C_REAL_PGDIR_SHIFT)
+#define SUN4C_REAL_PGDIR_MASK (~(SUN4C_REAL_PGDIR_SIZE-1))
+#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK)
+
+/* 16 bit PFN on sun4c */
+#define SUN4C_PFN_MASK 0xffff
+
+/* Don't increase these unless the structures in sun4c.c are fixed */
+#define SUN4C_MAX_SEGMAPS 256
+#define SUN4C_MAX_CONTEXTS 16
+
+/*
+ * To be efficient, and not have to worry about allocating such
+ * a huge pgd, we make the kernel sun4c tables each hold 1024
+ * entries and the pgd similarly just like the i386 tables.
+ */
+#define SUN4C_PTRS_PER_PTE 1024
+#define SUN4C_PTRS_PER_PMD 1
+#define SUN4C_PTRS_PER_PGD 1024
+
+/*
+ * Sparc SUN4C pte fields.
+ */
+#define _SUN4C_PAGE_VALID 0x80000000
+#define _SUN4C_PAGE_SILENT_READ 0x80000000 /* synonym */
+#define _SUN4C_PAGE_DIRTY 0x40000000
+#define _SUN4C_PAGE_SILENT_WRITE 0x40000000 /* synonym */
+#define _SUN4C_PAGE_PRIV 0x20000000 /* privileged page */
+#define _SUN4C_PAGE_NOCACHE 0x10000000 /* non-cacheable page */
+#define _SUN4C_PAGE_PRESENT 0x08000000 /* implemented in software */
+#define _SUN4C_PAGE_IO 0x04000000 /* I/O page */
+#define _SUN4C_PAGE_FILE 0x02000000 /* implemented in software */
+#define _SUN4C_PAGE_READ 0x00800000 /* implemented in software */
+#define _SUN4C_PAGE_WRITE 0x00400000 /* implemented in software */
+#define _SUN4C_PAGE_ACCESSED 0x00200000 /* implemented in software */
+#define _SUN4C_PAGE_MODIFIED 0x00100000 /* implemented in software */
+
+#define _SUN4C_READABLE (_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\
+ _SUN4C_PAGE_ACCESSED)
+#define _SUN4C_WRITEABLE (_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\
+ _SUN4C_PAGE_MODIFIED)
+
+#define _SUN4C_PAGE_CHG_MASK (0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED)
+
+#define SUN4C_PAGE_NONE __pgprot(_SUN4C_PAGE_PRESENT)
+#define SUN4C_PAGE_SHARED __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\
+ _SUN4C_PAGE_WRITE)
+#define SUN4C_PAGE_COPY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_READONLY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_KERNEL __pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
+ _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
+
+/* SUN4C swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset. This gives us
+ * 32 swapfiles of 4GB each. Encoding looks like:
+ *
+ * RRRRRRRRooooooooooooooooooottttt
+ * fedcba9876543210fedcba9876543210
+ *
+ * The top 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SUN4C_SWP_TYPE_MASK 0x1f
+#define SUN4C_SWP_OFF_MASK 0x7ffff
+#define SUN4C_SWP_OFF_SHIFT 5
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long sun4c_get_synchronous_error(void)
+{
+ unsigned long sync_err;
+
+ __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+ "=r" (sync_err) :
+ "r" (AC_SYNC_ERR), "i" (ASI_CONTROL));
+ return sync_err;
+}
+
+static inline unsigned long sun4c_get_synchronous_address(void)
+{
+ unsigned long sync_addr;
+
+ __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+ "=r" (sync_addr) :
+ "r" (AC_SYNC_VA), "i" (ASI_CONTROL));
+ return sync_addr;
+}
+
+/* SUN4C pte, segmap, and context manipulation */
+static inline unsigned long sun4c_get_segmap(unsigned long addr)
+{
+ register unsigned long entry;
+
+ __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
+ "=r" (entry) :
+ "r" (addr), "i" (ASI_SEGMAP));
+
+ return entry;
+}
+
+static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry)
+{
+
+ __asm__ __volatile__("\n\tstba %1, [%0] %2; nop; nop; nop;\n\t" : :
+ "r" (addr), "r" (entry),
+ "i" (ASI_SEGMAP)
+ : "memory");
+}
+
+static inline unsigned long sun4c_get_pte(unsigned long addr)
+{
+ register unsigned long entry;
+
+ __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" :
+ "=r" (entry) :
+ "r" (addr), "i" (ASI_PTE));
+ return entry;
+}
+
+static inline void sun4c_put_pte(unsigned long addr, unsigned long entry)
+{
+ __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : :
+ "r" (addr),
+ "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE)
+ : "memory");
+}
+
+static inline int sun4c_get_context(void)
+{
+ register int ctx;
+
+ __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
+ "=r" (ctx) :
+ "r" (AC_CONTEXT), "i" (ASI_CONTROL));
+
+ return ctx;
+}
+
+static inline int sun4c_set_context(int ctx)
+{
+ __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : :
+ "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL)
+ : "memory");
+
+ return ctx;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSUN4C_H) */
diff --git a/include/asm-sparc/poll.h b/include/asm-sparc/poll.h
new file mode 100644
index 000000000000..3ddcc6481f09
--- /dev/null
+++ b/include/asm-sparc/poll.h
@@ -0,0 +1,23 @@
+#ifndef __SPARC_POLL_H
+#define __SPARC_POLL_H
+
+#define POLLIN 1
+#define POLLPRI 2
+#define POLLOUT 4
+#define POLLERR 8
+#define POLLHUP 16
+#define POLLNVAL 32
+#define POLLRDNORM 64
+#define POLLWRNORM POLLOUT
+#define POLLRDBAND 128
+#define POLLWRBAND 256
+#define POLLMSG 512
+#define POLLREMOVE 1024
+
+struct pollfd {
+ int fd;
+ short events;
+ short revents;
+};
+
+#endif
diff --git a/include/asm-sparc/posix_types.h b/include/asm-sparc/posix_types.h
new file mode 100644
index 000000000000..9ef1b3db4cbf
--- /dev/null
+++ b/include/asm-sparc/posix_types.h
@@ -0,0 +1,122 @@
+#ifndef __ARCH_SPARC_POSIX_TYPES_H
+#define __ARCH_SPARC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef long int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_umode_t;
+typedef short __kernel_nlink_t;
+typedef long __kernel_daddr_t;
+typedef long __kernel_off_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef unsigned short __kernel_old_dev_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_timer_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+ int val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+ int __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant cases (8 or 32 longs,
+ * for 256 and 1024-bit fd_sets respectively)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+ unsigned long *tmp = p->fds_bits;
+ int i;
+
+ if (__builtin_constant_p(__FDSET_LONGS)) {
+ switch (__FDSET_LONGS) {
+ case 32:
+ tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+ tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+ tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+ tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+ tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+ tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+ tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+ tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+ return;
+ case 16:
+ tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+ tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+ tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+ tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+ return;
+ case 8:
+ tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+ tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+ return;
+ case 4:
+ tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+ return;
+ }
+ }
+ i = __FDSET_LONGS;
+ while (i) {
+ i--;
+ *tmp = 0;
+ tmp++;
+ }
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* !(__ARCH_SPARC_POSIX_TYPES_H) */
diff --git a/include/asm-sparc/processor.h b/include/asm-sparc/processor.h
new file mode 100644
index 000000000000..32c9699367cf
--- /dev/null
+++ b/include/asm-sparc/processor.h
@@ -0,0 +1,130 @@
+/* $Id: processor.h,v 1.83 2001/10/08 09:32:13 davem Exp $
+ * include/asm-sparc/processor.h
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC_PROCESSOR_H
+#define __ASM_SPARC_PROCESSOR_H
+
+/*
+ * Sparc32 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; })
+
+#include <linux/a.out.h>
+
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/head.h>
+#include <asm/signal.h>
+#include <asm/segment.h>
+#include <asm/btfixup.h>
+#include <asm/page.h>
+
+/*
+ * The sparc has no problems with write protection
+ */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/* Whee, this is STACK_TOP + PAGE_SIZE and the lowest kernel address too...
+ * That one page is used to protect kernel from intruders, so that
+ * we can make our access_ok test faster
+ */
+#define TASK_SIZE PAGE_OFFSET
+
+struct task_struct;
+
+#ifdef __KERNEL__
+struct fpq {
+ unsigned long *insn_addr;
+ unsigned long insn;
+};
+#endif
+
+typedef struct {
+ int seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+struct thread_struct {
+ struct pt_regs *kregs;
+ unsigned int _pad1;
+
+ /* Special child fork kpsr/kwim values. */
+ unsigned long fork_kpsr __attribute__ ((aligned (8)));
+ unsigned long fork_kwim;
+
+ /* Floating point regs */
+ unsigned long float_regs[32] __attribute__ ((aligned (8)));
+ unsigned long fsr;
+ unsigned long fpqdepth;
+ struct fpq fpqueue[16];
+ unsigned long flags;
+ mm_segment_t current_ds;
+ struct exec core_exec; /* just what it says. */
+ int new_signal;
+};
+
+#define SPARC_FLAG_KTHREAD 0x1 /* task is a kernel thread */
+#define SPARC_FLAG_UNALIGNED 0x2 /* is allowed to do unaligned accesses */
+
+#define INIT_THREAD { \
+ .flags = SPARC_FLAG_KTHREAD, \
+ .current_ds = KERNEL_DS, \
+}
+
+/* Return saved PC of a blocked thread. */
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+/* Do necessary setup to start up a newly executed thread. */
+extern __inline__ void start_thread(struct pt_regs * regs, unsigned long pc,
+ unsigned long sp)
+{
+ register unsigned long zero asm("g1");
+
+ regs->psr = (regs->psr & (PSR_CWP)) | PSR_S;
+ regs->pc = ((pc & (~3)) - 4);
+ regs->npc = regs->pc + 4;
+ regs->y = 0;
+ zero = 0;
+ __asm__ __volatile__("std\t%%g0, [%0 + %3 + 0x00]\n\t"
+ "std\t%%g0, [%0 + %3 + 0x08]\n\t"
+ "std\t%%g0, [%0 + %3 + 0x10]\n\t"
+ "std\t%%g0, [%0 + %3 + 0x18]\n\t"
+ "std\t%%g0, [%0 + %3 + 0x20]\n\t"
+ "std\t%%g0, [%0 + %3 + 0x28]\n\t"
+ "std\t%%g0, [%0 + %3 + 0x30]\n\t"
+ "st\t%1, [%0 + %3 + 0x38]\n\t"
+ "st\t%%g0, [%0 + %3 + 0x3c]"
+ : /* no outputs */
+ : "r" (regs),
+ "r" (sp - sizeof(struct reg_window)),
+ "r" (zero),
+ "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))
+ : "memory");
+}
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk) do { } while(0)
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while (0)
+
+extern unsigned long get_wchan(struct task_struct *);
+
+#define KSTK_EIP(tsk) ((tsk)->thread.kregs->pc)
+#define KSTK_ESP(tsk) ((tsk)->thread.kregs->u_regs[UREG_FP])
+
+#ifdef __KERNEL__
+
+extern struct task_struct *last_task_used_math;
+
+#define cpu_relax() barrier()
+
+#endif
+
+#endif /* __ASM_SPARC_PROCESSOR_H */
diff --git a/include/asm-sparc/psr.h b/include/asm-sparc/psr.h
new file mode 100644
index 000000000000..9778b8c8b15b
--- /dev/null
+++ b/include/asm-sparc/psr.h
@@ -0,0 +1,92 @@
+/* $Id: psr.h,v 1.15 1997/10/04 08:54:22 ecd Exp $
+ * psr.h: This file holds the macros for masking off various parts of
+ * the processor status register on the Sparc. This is valid
+ * for Version 8. On the V9 this is renamed to the PSTATE
+ * register and its members are accessed as fields like
+ * PSTATE.PRIV for the current CPU privilege level.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __LINUX_SPARC_PSR_H
+#define __LINUX_SPARC_PSR_H
+
+/* The Sparc PSR fields are laid out as the following:
+ *
+ * ------------------------------------------------------------------------
+ * | impl | vers | icc | resv | EC | EF | PIL | S | PS | ET | CWP |
+ * | 31-28 | 27-24 | 23-20 | 19-14 | 13 | 12 | 11-8 | 7 | 6 | 5 | 4-0 |
+ * ------------------------------------------------------------------------
+ */
+#define PSR_CWP 0x0000001f /* current window pointer */
+#define PSR_ET 0x00000020 /* enable traps field */
+#define PSR_PS 0x00000040 /* previous privilege level */
+#define PSR_S 0x00000080 /* current privilege level */
+#define PSR_PIL 0x00000f00 /* processor interrupt level */
+#define PSR_EF 0x00001000 /* enable floating point */
+#define PSR_EC 0x00002000 /* enable co-processor */
+#define PSR_LE 0x00008000 /* SuperSparcII little-endian */
+#define PSR_ICC 0x00f00000 /* integer condition codes */
+#define PSR_C 0x00100000 /* carry bit */
+#define PSR_V 0x00200000 /* overflow bit */
+#define PSR_Z 0x00400000 /* zero bit */
+#define PSR_N 0x00800000 /* negative bit */
+#define PSR_VERS 0x0f000000 /* cpu-version field */
+#define PSR_IMPL 0xf0000000 /* cpu-implementation field */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+/* Get the %psr register. */
+extern __inline__ unsigned int get_psr(void)
+{
+ unsigned int psr;
+ __asm__ __volatile__(
+ "rd %%psr, %0\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ : "=r" (psr)
+ : /* no inputs */
+ : "memory");
+
+ return psr;
+}
+
+extern __inline__ void put_psr(unsigned int new_psr)
+{
+ __asm__ __volatile__(
+ "wr %0, 0x0, %%psr\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ : /* no outputs */
+ : "r" (new_psr)
+ : "memory", "cc");
+}
+
+/* Get the %fsr register. Be careful, make sure the floating point
+ * enable bit is set in the %psr when you execute this or you will
+ * incur a trap.
+ */
+
+extern unsigned int fsr_storage;
+
+extern __inline__ unsigned int get_fsr(void)
+{
+ unsigned int fsr = 0;
+
+ __asm__ __volatile__(
+ "st %%fsr, %1\n\t"
+ "ld %1, %0\n\t"
+ : "=r" (fsr)
+ : "m" (fsr_storage));
+
+ return fsr;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* (__KERNEL__) */
+
+#endif /* !(__LINUX_SPARC_PSR_H) */
diff --git a/include/asm-sparc/ptrace.h b/include/asm-sparc/ptrace.h
new file mode 100644
index 000000000000..dd9d94d7e0ae
--- /dev/null
+++ b/include/asm-sparc/ptrace.h
@@ -0,0 +1,167 @@
+/* $Id: ptrace.h,v 1.25 1997/03/04 16:27:25 jj Exp $ */
+#ifndef _SPARC_PTRACE_H
+#define _SPARC_PTRACE_H
+
+#include <asm/psr.h>
+
+/* This struct defines the way the registers are stored on the
+ * stack during a system call and basically all traps.
+ */
+
+#ifndef __ASSEMBLY__
+
+struct pt_regs {
+ unsigned long psr;
+ unsigned long pc;
+ unsigned long npc;
+ unsigned long y;
+ unsigned long u_regs[16]; /* globals and ins */
+};
+
+#define UREG_G0 0
+#define UREG_G1 1
+#define UREG_G2 2
+#define UREG_G3 3
+#define UREG_G4 4
+#define UREG_G5 5
+#define UREG_G6 6
+#define UREG_G7 7
+#define UREG_I0 8
+#define UREG_I1 9
+#define UREG_I2 10
+#define UREG_I3 11
+#define UREG_I4 12
+#define UREG_I5 13
+#define UREG_I6 14
+#define UREG_I7 15
+#define UREG_WIM UREG_G0
+#define UREG_FADDR UREG_G0
+#define UREG_FP UREG_I6
+#define UREG_RETPC UREG_I7
+
+/* A register window */
+struct reg_window {
+ unsigned long locals[8];
+ unsigned long ins[8];
+};
+
+/* A Sparc stack frame */
+struct sparc_stackf {
+ unsigned long locals[8];
+ unsigned long ins[6];
+ struct sparc_stackf *fp;
+ unsigned long callers_pc;
+ char *structptr;
+ unsigned long xargs[6];
+ unsigned long xxargs[1];
+};
+
+#define TRACEREG_SZ sizeof(struct pt_regs)
+#define STACKFRAME_SZ sizeof(struct sparc_stackf)
+
+#ifdef __KERNEL__
+#define user_mode(regs) (!((regs)->psr & PSR_PS))
+#define instruction_pointer(regs) ((regs)->pc)
+unsigned long profile_pc(struct pt_regs *);
+extern void show_regs(struct pt_regs *);
+#endif
+
+#else /* __ASSEMBLY__ */
+/* For assembly code. */
+#define TRACEREG_SZ 0x50
+#define STACKFRAME_SZ 0x60
+#endif
+
+/*
+ * The asm_offsets.h is a generated file, so we cannot include it.
+ * It may be OK for glibc headers, but it's utterly pointless for C code.
+ * The assembly code using those offsets has to include it explicitly.
+ */
+/* #include <asm/asm_offsets.h> */
+
+/* These are for pt_regs. */
+#define PT_PSR 0x0
+#define PT_PC 0x4
+#define PT_NPC 0x8
+#define PT_Y 0xc
+#define PT_G0 0x10
+#define PT_WIM PT_G0
+#define PT_G1 0x14
+#define PT_G2 0x18
+#define PT_G3 0x1c
+#define PT_G4 0x20
+#define PT_G5 0x24
+#define PT_G6 0x28
+#define PT_G7 0x2c
+#define PT_I0 0x30
+#define PT_I1 0x34
+#define PT_I2 0x38
+#define PT_I3 0x3c
+#define PT_I4 0x40
+#define PT_I5 0x44
+#define PT_I6 0x48
+#define PT_FP PT_I6
+#define PT_I7 0x4c
+
+/* Reg_window offsets */
+#define RW_L0 0x00
+#define RW_L1 0x04
+#define RW_L2 0x08
+#define RW_L3 0x0c
+#define RW_L4 0x10
+#define RW_L5 0x14
+#define RW_L6 0x18
+#define RW_L7 0x1c
+#define RW_I0 0x20
+#define RW_I1 0x24
+#define RW_I2 0x28
+#define RW_I3 0x2c
+#define RW_I4 0x30
+#define RW_I5 0x34
+#define RW_I6 0x38
+#define RW_I7 0x3c
+
+/* Stack_frame offsets */
+#define SF_L0 0x00
+#define SF_L1 0x04
+#define SF_L2 0x08
+#define SF_L3 0x0c
+#define SF_L4 0x10
+#define SF_L5 0x14
+#define SF_L6 0x18
+#define SF_L7 0x1c
+#define SF_I0 0x20
+#define SF_I1 0x24
+#define SF_I2 0x28
+#define SF_I3 0x2c
+#define SF_I4 0x30
+#define SF_I5 0x34
+#define SF_FP 0x38
+#define SF_PC 0x3c
+#define SF_RETP 0x40
+#define SF_XARG0 0x44
+#define SF_XARG1 0x48
+#define SF_XARG2 0x4c
+#define SF_XARG3 0x50
+#define SF_XARG4 0x54
+#define SF_XARG5 0x58
+#define SF_XXARG 0x5c
+
+/* Stuff for the ptrace system call */
+#define PTRACE_SUNATTACH 10
+#define PTRACE_SUNDETACH 11
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+#define PTRACE_READDATA 16
+#define PTRACE_WRITEDATA 17
+#define PTRACE_READTEXT 18
+#define PTRACE_WRITETEXT 19
+#define PTRACE_GETFPAREGS 20
+#define PTRACE_SETFPAREGS 21
+
+#define PTRACE_GETUCODE 29 /* stupid bsd-ism */
+
+
+#endif /* !(_SPARC_PTRACE_H) */
diff --git a/include/asm-sparc/reg.h b/include/asm-sparc/reg.h
new file mode 100644
index 000000000000..ed60ebec5930
--- /dev/null
+++ b/include/asm-sparc/reg.h
@@ -0,0 +1,79 @@
+/*
+ * linux/asm-sparc/reg.h
+ * Layout of the registers as expected by gdb on the Sparc
+ * we should replace the user.h definitions with those in
+ * this file, we don't even use the other
+ * -miguel
+ *
+ * The names of the structures, constants and aliases in this file
+ * have the same names as the sunos ones, some programs rely on these
+ * names (gdb for example).
+ *
+ */
+
+#ifndef __SPARC_REG_H
+#define __SPARC_REG_H
+
+struct regs {
+ int r_psr;
+#define r_ps r_psr
+ int r_pc;
+ int r_npc;
+ int r_y;
+ int r_g1;
+ int r_g2;
+ int r_g3;
+ int r_g4;
+ int r_g5;
+ int r_g6;
+ int r_g7;
+ int r_o0;
+ int r_o1;
+ int r_o2;
+ int r_o3;
+ int r_o4;
+ int r_o5;
+ int r_o6;
+ int r_o7;
+};
+
+struct fpq {
+ unsigned long *addr;
+ unsigned long instr;
+};
+
+struct fq {
+ union {
+ double whole;
+ struct fpq fpq;
+ } FQu;
+};
+
+#define FPU_REGS_TYPE unsigned int
+#define FPU_FSR_TYPE unsigned
+
+struct fp_status {
+ union {
+ FPU_REGS_TYPE Fpu_regs[32];
+ double Fpu_dregs[16];
+ } fpu_fr;
+ FPU_FSR_TYPE Fpu_fsr;
+ unsigned Fpu_flags;
+ unsigned Fpu_extra;
+ unsigned Fpu_qcnt;
+ struct fq Fpu_q[16];
+};
+
+#define fpu_regs f_fpstatus.fpu_fr.Fpu_regs
+#define fpu_dregs f_fpstatus.fpu_fr.Fpu_dregs
+#define fpu_fsr f_fpstatus.Fpu_fsr
+#define fpu_flags f_fpstatus.Fpu_flags
+#define fpu_extra f_fpstatus.Fpu_extra
+#define fpu_q f_fpstatus.Fpu_q
+#define fpu_qcnt f_fpstatus.Fpu_qcnt
+
+struct fpu {
+ struct fp_status f_fpstatus;
+};
+
+#endif /* __SPARC_REG_H */
diff --git a/include/asm-sparc/resource.h b/include/asm-sparc/resource.h
new file mode 100644
index 000000000000..0514c304e130
--- /dev/null
+++ b/include/asm-sparc/resource.h
@@ -0,0 +1,26 @@
+/* $Id: resource.h,v 1.12 2000/09/23 02:09:21 davem Exp $
+ * resource.h: Resource definitions.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_RESOURCE_H
+#define _SPARC_RESOURCE_H
+
+/*
+ * These two resource limit IDs have a Sparc/Linux-specific ordering,
+ * the rest comes from the generic header:
+ */
+#define RLIMIT_NOFILE 6 /* max number of open files */
+#define RLIMIT_NPROC 7 /* max number of processes */
+
+/*
+ * SuS says limits have to be unsigned.
+ * We make this unsigned, but keep the
+ * old value for compatibility:
+ */
+#define RLIM_INFINITY 0x7fffffff
+
+#include <asm-generic/resource.h>
+
+#endif /* !(_SPARC_RESOURCE_H) */
diff --git a/include/asm-sparc/ross.h b/include/asm-sparc/ross.h
new file mode 100644
index 000000000000..f2c14b5080ed
--- /dev/null
+++ b/include/asm-sparc/ross.h
@@ -0,0 +1,191 @@
+/* $Id: ross.h,v 1.13 1998/01/07 06:49:11 baccala Exp $
+ * ross.h: Ross module specific definitions and defines.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_ROSS_H
+#define _SPARC_ROSS_H
+
+#include <asm/asi.h>
+#include <asm/page.h>
+
+/* Ross made Hypersparcs have a %psr 'impl' field of '0001'. The 'vers'
+ * field has '1111'.
+ */
+
+/* The MMU control register fields on the HyperSparc.
+ *
+ * -----------------------------------------------------------------
+ * |implvers| RSV |CWR|SE|WBE| MID |BM| C|CS|MR|CM|RSV|CE|RSV|NF|ME|
+ * -----------------------------------------------------------------
+ * 31 24 23-22 21 20 19 18-15 14 13 12 11 10 9 8 7-2 1 0
+ *
+ * Phew, lots of fields there ;-)
+ *
+ * CWR: Cache Wrapping Enabled, if one cache wrapping is on.
+ * SE: Snoop Enable, turns on bus snooping for cache activity if one.
+ * WBE: Write Buffer Enable, one turns it on.
+ * MID: The ModuleID of the chip for MBus transactions.
+ * BM: Boot-Mode. One indicates the MMU is in boot mode.
+ * C: Indicates whether accesses are cachable while the MMU is
+ * disabled.
+ * CS: Cache Size -- 0 = 128k, 1 = 256k
+ * MR: Memory Reflection, one indicates that the memory bus connected
+ * to the MBus supports memory reflection.
+ * CM: Cache Mode -- 0 = write-through, 1 = copy-back
+ * CE: Cache Enable -- 0 = no caching, 1 = cache is on
+ * NF: No Fault -- 0 = faults trap the CPU from supervisor mode
+ * 1 = faults from supervisor mode do not generate traps
+ * ME: MMU Enable -- 0 = MMU is off, 1 = MMU is on
+ */
+
+#define HYPERSPARC_CWENABLE 0x00200000
+#define HYPERSPARC_SBENABLE 0x00100000
+#define HYPERSPARC_WBENABLE 0x00080000
+#define HYPERSPARC_MIDMASK 0x00078000
+#define HYPERSPARC_BMODE 0x00004000
+#define HYPERSPARC_ACENABLE 0x00002000
+#define HYPERSPARC_CSIZE 0x00001000
+#define HYPERSPARC_MRFLCT 0x00000800
+#define HYPERSPARC_CMODE 0x00000400
+#define HYPERSPARC_CENABLE 0x00000100
+#define HYPERSPARC_NFAULT 0x00000002
+#define HYPERSPARC_MENABLE 0x00000001
+
+
+/* The ICCR instruction cache register on the HyperSparc.
+ *
+ * -----------------------------------------------
+ * | | FTD | ICE |
+ * -----------------------------------------------
+ * 31 1 0
+ *
+ * This register is accessed using the V8 'wrasr' and 'rdasr'
+ * opcodes, since not all assemblers understand them and those
+ * that do use different semantics I will just hard code the
+ * instruction with a '.word' statement.
+ *
+ * FTD: If set to one flush instructions executed during an
+ * instruction cache hit occurs, the corresponding line
+ * for said cache-hit is invalidated. If FTD is zero,
+ * an unimplemented 'flush' trap will occur when any
+ * flush is executed by the processor.
+ *
+ * ICE: If set to one, the instruction cache is enabled. If
+ * zero, the cache will not be used for instruction fetches.
+ *
+ * All other bits are read as zeros, and writes to them have no
+ * effect.
+ *
+ * Wheee, not many assemblers understand the %iccr register nor
+ * the generic asr r/w instructions.
+ *
+ * 1000 0011 0100 0111 1100 0000 0000 0000 ! rd %iccr, %g1
+ *
+ * 0x 8 3 4 7 c 0 0 0 ! 0x8347c000
+ *
+ * 1011 1111 1000 0000 0110 0000 0000 0000 ! wr %g1, 0x0, %iccr
+ *
+ * 0x b f 8 0 6 0 0 0 ! 0xbf806000
+ *
+ */
+
+#define HYPERSPARC_ICCR_FTD 0x00000002
+#define HYPERSPARC_ICCR_ICE 0x00000001
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int get_ross_icr(void)
+{
+ unsigned int icreg;
+
+ __asm__ __volatile__(".word 0x8347c000\n\t" /* rd %iccr, %g1 */
+ "mov %%g1, %0\n\t"
+ : "=r" (icreg)
+ : /* no inputs */
+ : "g1", "memory");
+
+ return icreg;
+}
+
+static inline void put_ross_icr(unsigned int icreg)
+{
+ __asm__ __volatile__("or %%g0, %0, %%g1\n\t"
+ ".word 0xbf806000\n\t" /* wr %g1, 0x0, %iccr */
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ : /* no outputs */
+ : "r" (icreg)
+ : "g1", "memory");
+
+ return;
+}
+
+/* HyperSparc specific cache flushing. */
+
+/* This is for the on-chip instruction cache. */
+static inline void hyper_flush_whole_icache(void)
+{
+ __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+ : /* no outputs */
+ : "i" (ASI_M_FLUSH_IWHOLE)
+ : "memory");
+ return;
+}
+
+extern int vac_cache_size;
+extern int vac_line_size;
+
+static inline void hyper_clear_all_tags(void)
+{
+ unsigned long addr;
+
+ for(addr = 0; addr < vac_cache_size; addr += vac_line_size)
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" (addr), "i" (ASI_M_DATAC_TAG)
+ : "memory");
+}
+
+static inline void hyper_flush_unconditional_combined(void)
+{
+ unsigned long addr;
+
+ for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" (addr), "i" (ASI_M_FLUSH_CTX)
+ : "memory");
+}
+
+static inline void hyper_flush_cache_user(void)
+{
+ unsigned long addr;
+
+ for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" (addr), "i" (ASI_M_FLUSH_USER)
+ : "memory");
+}
+
+static inline void hyper_flush_cache_page(unsigned long page)
+{
+ unsigned long end;
+
+ page &= PAGE_MASK;
+ end = page + PAGE_SIZE;
+ while (page < end) {
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" (page), "i" (ASI_M_FLUSH_PAGE)
+ : "memory");
+ page += vac_line_size;
+ }
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_ROSS_H) */
diff --git a/include/asm-sparc/rtc.h b/include/asm-sparc/rtc.h
new file mode 100644
index 000000000000..f4f261dde699
--- /dev/null
+++ b/include/asm-sparc/rtc.h
@@ -0,0 +1,27 @@
+/* $Id: rtc.h,v 1.2 1996/08/21 23:17:39 ecd Exp $
+ *
+ * rtc.h: Definitions for access to the Mostek real time clock
+ *
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ */
+
+#ifndef _RTC_H
+#define _RTC_H
+
+#include <linux/ioctl.h>
+
+struct rtc_time
+{
+ int sec; /* Seconds (0-59) */
+ int min; /* Minutes (0-59) */
+ int hour; /* Hour (0-23) */
+ int dow; /* Day of the week (1-7) */
+ int dom; /* Day of the month (1-31) */
+ int month; /* Month of year (1-12) */
+ int year; /* Year (0-99) */
+};
+
+#define RTCGET _IOR('p', 20, struct rtc_time)
+#define RTCSET _IOW('p', 21, struct rtc_time)
+
+#endif
diff --git a/include/asm-sparc/sbi.h b/include/asm-sparc/sbi.h
new file mode 100644
index 000000000000..739ccac5dcf2
--- /dev/null
+++ b/include/asm-sparc/sbi.h
@@ -0,0 +1,115 @@
+/* $Id: sbi.h,v 1.2 1998/03/09 14:04:48 jj Exp $
+ * sbi.h: SBI (Sbus Interface on sun4d) definitions
+ *
+ * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
+ */
+
+#ifndef _SPARC_SBI_H
+#define _SPARC_SBI_H
+
+#include <asm/obio.h>
+
+/* SBI */
+struct sbi_regs {
+/* 0x0000 */ u32 cid; /* Component ID */
+/* 0x0004 */ u32 ctl; /* Control */
+/* 0x0008 */ u32 status; /* Status */
+ u32 _unused1;
+
+/* 0x0010 */ u32 cfg0; /* Slot0 config reg */
+/* 0x0014 */ u32 cfg1; /* Slot1 config reg */
+/* 0x0018 */ u32 cfg2; /* Slot2 config reg */
+/* 0x001c */ u32 cfg3; /* Slot3 config reg */
+
+/* 0x0020 */ u32 stb0; /* Streaming buf control for slot 0 */
+/* 0x0024 */ u32 stb1; /* Streaming buf control for slot 1 */
+/* 0x0028 */ u32 stb2; /* Streaming buf control for slot 2 */
+/* 0x002c */ u32 stb3; /* Streaming buf control for slot 3 */
+
+/* 0x0030 */ u32 intr_state; /* Interrupt state */
+/* 0x0034 */ u32 intr_tid; /* Interrupt target ID */
+/* 0x0038 */ u32 intr_diag; /* Interrupt diagnostics */
+};
+
+#define SBI_CID 0x02800000
+#define SBI_CTL 0x02800004
+#define SBI_STATUS 0x02800008
+#define SBI_CFG0 0x02800010
+#define SBI_CFG1 0x02800014
+#define SBI_CFG2 0x02800018
+#define SBI_CFG3 0x0280001c
+#define SBI_STB0 0x02800020
+#define SBI_STB1 0x02800024
+#define SBI_STB2 0x02800028
+#define SBI_STB3 0x0280002c
+#define SBI_INTR_STATE 0x02800030
+#define SBI_INTR_TID 0x02800034
+#define SBI_INTR_DIAG 0x02800038
+
+/* Burst bits for 8, 16, 32, 64 are in cfgX registers at bits 2, 3, 4, 5 respectively */
+#define SBI_CFG_BURST_MASK 0x0000001e
+
+/* How to make devid from sbi no */
+#define SBI2DEVID(sbino) ((sbino<<4)|2)
+
+/* intr_state has 4 bits for slots 0 .. 3 and these bits are repeated for each sbus irq level
+ *
+ * +-------+-------+-------+-------+-------+-------+-------+-------+
+ * SBUS IRQ LEVEL | 7 | 6 | 5 | 4 | 3 | 2 | 1 | |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Reser |
+ * SLOT # |3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0| ved |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-------+
+ * Bits 31 27 23 19 15 11 7 3 0
+ */
+
+
+#ifndef __ASSEMBLY__
+
+extern __inline__ int acquire_sbi(int devid, int mask)
+{
+ __asm__ __volatile__ ("swapa [%2] %3, %0" :
+ "=r" (mask) :
+ "0" (mask),
+ "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE),
+ "i" (ASI_M_CTL));
+ return mask;
+}
+
+extern __inline__ void release_sbi(int devid, int mask)
+{
+ __asm__ __volatile__ ("sta %0, [%1] %2" : :
+ "r" (mask),
+ "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE),
+ "i" (ASI_M_CTL));
+}
+
+extern __inline__ void set_sbi_tid(int devid, int targetid)
+{
+ __asm__ __volatile__ ("sta %0, [%1] %2" : :
+ "r" (targetid),
+ "r" (ECSR_DEV_BASE(devid) | SBI_INTR_TID),
+ "i" (ASI_M_CTL));
+}
+
+extern __inline__ int get_sbi_ctl(int devid, int cfgno)
+{
+ int cfg;
+
+ __asm__ __volatile__ ("lda [%1] %2, %0" :
+ "=r" (cfg) :
+ "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)),
+ "i" (ASI_M_CTL));
+ return cfg;
+}
+
+extern __inline__ void set_sbi_ctl(int devid, int cfgno, int cfg)
+{
+ __asm__ __volatile__ ("sta %0, [%1] %2" : :
+ "r" (cfg),
+ "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)),
+ "i" (ASI_M_CTL));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_SBI_H) */
diff --git a/include/asm-sparc/sbus.h b/include/asm-sparc/sbus.h
new file mode 100644
index 000000000000..3a8b3908728a
--- /dev/null
+++ b/include/asm-sparc/sbus.h
@@ -0,0 +1,142 @@
+/* $Id: sbus.h,v 1.22 2000/02/18 13:50:50 davem Exp $
+ * sbus.h: Defines for the Sun SBus.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SBUS_H
+#define _SPARC_SBUS_H
+
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+
+#include <asm/oplib.h>
+/* #include <asm/iommu.h> */ /* Unused since we use opaque iommu (|io-unit) */
+#include <asm/scatterlist.h>
+
+/* We scan which devices are on the SBus using the PROM node device
+ * tree. SBus devices are described in two different ways. You can
+ * either get an absolute address at which to access the device, or
+ * you can get a SBus 'slot' number and an offset within that slot.
+ */
+
+/* The base address at which to calculate device OBIO addresses. */
+#define SUN_SBUS_BVADDR 0xf8000000
+#define SBUS_OFF_MASK 0x01ffffff
+
+/* These routines are used to calculate device address from slot
+ * numbers + offsets, and vice versa.
+ */
+
+extern __inline__ unsigned long sbus_devaddr(int slotnum, unsigned long offset)
+{
+ return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset));
+}
+
+extern __inline__ int sbus_dev_slot(unsigned long dev_addr)
+{
+ return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25);
+}
+
+struct sbus_bus;
+
+/* Linux SBUS device tables */
+struct sbus_dev {
+ struct sbus_bus *bus; /* Back ptr to sbus */
+ struct sbus_dev *next; /* next device on this SBus or null */
+ struct sbus_dev *child; /* For ledma and espdma on sun4m */
+ struct sbus_dev *parent; /* Parent device if not toplevel */
+ int prom_node; /* PROM device tree node for this device */
+ char prom_name[64]; /* PROM device name */
+ int slot;
+
+ struct resource resource[PROMREG_MAX];
+
+ struct linux_prom_registers reg_addrs[PROMREG_MAX];
+ int num_registers, ranges_applied;
+
+ struct linux_prom_ranges device_ranges[PROMREG_MAX];
+ int num_device_ranges;
+
+ unsigned int irqs[4];
+ int num_irqs;
+};
+
+/* This struct describes the SBus(s) found on this machine. */
+struct sbus_bus {
+ void *iommu; /* Opaque IOMMU cookie */
+ struct sbus_dev *devices; /* Link to devices on this SBus */
+ struct sbus_bus *next; /* next SBus, if more than one SBus */
+ int prom_node; /* PROM device tree node for this SBus */
+ char prom_name[64]; /* Usually "sbus" or "sbi" */
+ int clock_freq;
+
+ struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
+ int num_sbus_ranges;
+
+ int devid;
+ int board;
+};
+
+extern struct sbus_bus *sbus_root;
+
+extern __inline__ int
+sbus_is_slave(struct sbus_dev *dev)
+{
+ /* XXX Have to write this for sun4c's */
+ return 0;
+}
+
+/* Device probing routines could find these handy */
+#define for_each_sbus(bus) \
+ for((bus) = sbus_root; (bus); (bus)=(bus)->next)
+
+#define for_each_sbusdev(device, bus) \
+ for((device) = (bus)->devices; (device); (device)=(device)->next)
+
+#define for_all_sbusdev(device, bus) \
+ for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
+ for ((device) = (bus)->devices; (device); (device) = (device)->next)
+
+/* Driver DVMA interfaces. */
+#define sbus_can_dma_64bit(sdev) (0) /* actually, sparc_cpu_model==sun4d */
+#define sbus_can_burst64(sdev) (0) /* actually, sparc_cpu_model==sun4d */
+extern void sbus_set_sbus64(struct sbus_dev *, int);
+
+/* These yield IOMMU mappings in consistent mode. */
+extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp);
+extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32);
+void prom_adjust_ranges(struct linux_prom_ranges *, int,
+ struct linux_prom_ranges *, int);
+
+#define SBUS_DMA_BIDIRECTIONAL DMA_BIDIRECTIONAL
+#define SBUS_DMA_TODEVICE DMA_TO_DEVICE
+#define SBUS_DMA_FROMDEVICE DMA_FROM_DEVICE
+#define SBUS_DMA_NONE DMA_NONE
+
+/* All the rest use streaming mode mappings. */
+extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int);
+extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int);
+extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int);
+extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Finally, allow explicit synchronization of streamable mappings. */
+extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int);
+#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
+extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int);
+extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int);
+#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
+extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Eric Brower (ebrower@usa.net)
+ * Translate SBus interrupt levels to ino values--
+ * this is used when converting sbus "interrupts" OBP
+ * node values to "intr" node values, and is platform
+ * dependent. If only we could call OBP with
+ * "sbus-intr>cpu (sbint -- ino)" from kernel...
+ * See .../drivers/sbus/sbus.c for details.
+ */
+BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int)
+#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint)
+
+#endif /* !(_SPARC_SBUS_H) */
diff --git a/include/asm-sparc/scatterlist.h b/include/asm-sparc/scatterlist.h
new file mode 100644
index 000000000000..a4fcf9ac9649
--- /dev/null
+++ b/include/asm-sparc/scatterlist.h
@@ -0,0 +1,22 @@
+/* $Id: scatterlist.h,v 1.8 2001/12/17 07:05:15 davem Exp $ */
+#ifndef _SPARC_SCATTERLIST_H
+#define _SPARC_SCATTERLIST_H
+
+#include <linux/types.h>
+
+struct scatterlist {
+ struct page *page;
+ unsigned int offset;
+
+ unsigned int length;
+
+ __u32 dvma_address; /* A place to hang host-specific addresses at. */
+ __u32 dvma_length;
+};
+
+#define sg_dma_address(sg) ((sg)->dvma_address)
+#define sg_dma_len(sg) ((sg)->dvma_length)
+
+#define ISA_DMA_THRESHOLD (~0UL)
+
+#endif /* !(_SPARC_SCATTERLIST_H) */
diff --git a/include/asm-sparc/sections.h b/include/asm-sparc/sections.h
new file mode 100644
index 000000000000..6832841df051
--- /dev/null
+++ b/include/asm-sparc/sections.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_SECTIONS_H
+#define _SPARC_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/include/asm-sparc/segment.h b/include/asm-sparc/segment.h
new file mode 100644
index 000000000000..a1b7ffc9eec9
--- /dev/null
+++ b/include/asm-sparc/segment.h
@@ -0,0 +1,6 @@
+#ifndef __SPARC_SEGMENT_H
+#define __SPARC_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif
diff --git a/include/asm-sparc/semaphore.h b/include/asm-sparc/semaphore.h
new file mode 100644
index 000000000000..60ac5fd9eb48
--- /dev/null
+++ b/include/asm-sparc/semaphore.h
@@ -0,0 +1,196 @@
+#ifndef _SPARC_SEMAPHORE_H
+#define _SPARC_SEMAPHORE_H
+
+/* Dinky, good for nothing, just barely irq safe, Sparc semaphores. */
+
+#ifdef __KERNEL__
+
+#include <asm/atomic.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+struct semaphore {
+ atomic24_t count;
+ int sleepers;
+ wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n) \
+{ \
+ .count = ATOMIC24_INIT(n), \
+ .sleepers = 0, \
+ .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
+}
+
+#define __MUTEX_INITIALIZER(name) \
+ __SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+ struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+ atomic24_set(&sem->count, val);
+ sem->sleepers = 0;
+ init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+ sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+ sema_init(sem, 0);
+}
+
+extern void __down(struct semaphore * sem);
+extern int __down_interruptible(struct semaphore * sem);
+extern int __down_trylock(struct semaphore * sem);
+extern void __up(struct semaphore * sem);
+
+static inline void down(struct semaphore * sem)
+{
+ register volatile int *ptr asm("g1");
+ register int increment asm("g2");
+
+ might_sleep();
+
+ ptr = &(sem->count.counter);
+ increment = 1;
+
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___atomic24_sub\n\t"
+ " add %%o7, 8, %%o7\n\t"
+ "tst %%g2\n\t"
+ "bl 2f\n\t"
+ " nop\n"
+ "1:\n\t"
+ ".subsection 2\n"
+ "2:\n\t"
+ "save %%sp, -64, %%sp\n\t"
+ "mov %%g1, %%l1\n\t"
+ "mov %%g5, %%l5\n\t"
+ "call %3\n\t"
+ " mov %%g1, %%o0\n\t"
+ "mov %%l1, %%g1\n\t"
+ "ba 1b\n\t"
+ " restore %%l5, %%g0, %%g5\n\t"
+ ".previous\n"
+ : "=&r" (increment)
+ : "0" (increment), "r" (ptr), "i" (__down)
+ : "g3", "g4", "g7", "memory", "cc");
+}
+
+static inline int down_interruptible(struct semaphore * sem)
+{
+ register volatile int *ptr asm("g1");
+ register int increment asm("g2");
+
+ might_sleep();
+
+ ptr = &(sem->count.counter);
+ increment = 1;
+
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___atomic24_sub\n\t"
+ " add %%o7, 8, %%o7\n\t"
+ "tst %%g2\n\t"
+ "bl 2f\n\t"
+ " clr %%g2\n"
+ "1:\n\t"
+ ".subsection 2\n"
+ "2:\n\t"
+ "save %%sp, -64, %%sp\n\t"
+ "mov %%g1, %%l1\n\t"
+ "mov %%g5, %%l5\n\t"
+ "call %3\n\t"
+ " mov %%g1, %%o0\n\t"
+ "mov %%l1, %%g1\n\t"
+ "mov %%l5, %%g5\n\t"
+ "ba 1b\n\t"
+ " restore %%o0, %%g0, %%g2\n\t"
+ ".previous\n"
+ : "=&r" (increment)
+ : "0" (increment), "r" (ptr), "i" (__down_interruptible)
+ : "g3", "g4", "g7", "memory", "cc");
+
+ return increment;
+}
+
+static inline int down_trylock(struct semaphore * sem)
+{
+ register volatile int *ptr asm("g1");
+ register int increment asm("g2");
+
+ ptr = &(sem->count.counter);
+ increment = 1;
+
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___atomic24_sub\n\t"
+ " add %%o7, 8, %%o7\n\t"
+ "tst %%g2\n\t"
+ "bl 2f\n\t"
+ " clr %%g2\n"
+ "1:\n\t"
+ ".subsection 2\n"
+ "2:\n\t"
+ "save %%sp, -64, %%sp\n\t"
+ "mov %%g1, %%l1\n\t"
+ "mov %%g5, %%l5\n\t"
+ "call %3\n\t"
+ " mov %%g1, %%o0\n\t"
+ "mov %%l1, %%g1\n\t"
+ "mov %%l5, %%g5\n\t"
+ "ba 1b\n\t"
+ " restore %%o0, %%g0, %%g2\n\t"
+ ".previous\n"
+ : "=&r" (increment)
+ : "0" (increment), "r" (ptr), "i" (__down_trylock)
+ : "g3", "g4", "g7", "memory", "cc");
+
+ return increment;
+}
+
+static inline void up(struct semaphore * sem)
+{
+ register volatile int *ptr asm("g1");
+ register int increment asm("g2");
+
+ ptr = &(sem->count.counter);
+ increment = 1;
+
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___atomic24_add\n\t"
+ " add %%o7, 8, %%o7\n\t"
+ "tst %%g2\n\t"
+ "ble 2f\n\t"
+ " nop\n"
+ "1:\n\t"
+ ".subsection 2\n"
+ "2:\n\t"
+ "save %%sp, -64, %%sp\n\t"
+ "mov %%g1, %%l1\n\t"
+ "mov %%g5, %%l5\n\t"
+ "call %3\n\t"
+ " mov %%g1, %%o0\n\t"
+ "mov %%l1, %%g1\n\t"
+ "ba 1b\n\t"
+ " restore %%l5, %%g0, %%g5\n\t"
+ ".previous\n"
+ : "=&r" (increment)
+ : "0" (increment), "r" (ptr), "i" (__up)
+ : "g3", "g4", "g7", "memory", "cc");
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* !(_SPARC_SEMAPHORE_H) */
diff --git a/include/asm-sparc/sembuf.h b/include/asm-sparc/sembuf.h
new file mode 100644
index 000000000000..a79c4bb3c08a
--- /dev/null
+++ b/include/asm-sparc/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _SPARC_SEMBUF_H
+#define _SPARC_SEMBUF_H
+
+/*
+ * The semid64_ds structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ unsigned int __pad1;
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned int __pad2;
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _SPARC64_SEMBUF_H */
diff --git a/include/asm-sparc/setup.h b/include/asm-sparc/setup.h
new file mode 100644
index 000000000000..b3af958a2ad2
--- /dev/null
+++ b/include/asm-sparc/setup.h
@@ -0,0 +1,10 @@
+/*
+ * Just a place holder.
+ */
+
+#ifndef _SPARC_SETUP_H
+#define _SPARC_SETUP_H
+
+#define COMMAND_LINE_SIZE 256
+
+#endif /* _SPARC_SETUP_H */
diff --git a/include/asm-sparc/sfp-machine.h b/include/asm-sparc/sfp-machine.h
new file mode 100644
index 000000000000..b4ca2d94bf08
--- /dev/null
+++ b/include/asm-sparc/sfp-machine.h
@@ -0,0 +1,207 @@
+/* Machine-dependent software floating-point definitions.
+ Sparc userland (_Q_*) version.
+ Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+ Contributed by Richard Henderson (rth@cygnus.com),
+ Jakub Jelinek (jj@ultra.linux.cz),
+ David S. Miller (davem@redhat.com) and
+ Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Library General Public License as
+ published by the Free Software Foundation; either version 2 of the
+ License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with the GNU C Library; see the file COPYING.LIB. If
+ not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+
+#include <linux/config.h>
+
+#define _FP_W_TYPE_SIZE 32
+#define _FP_W_TYPE unsigned long
+#define _FP_WS_TYPE signed long
+#define _FP_I_TYPE long
+
+#define _FP_MUL_MEAT_S(R,X,Y) \
+ _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y) \
+ _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y) \
+ _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S 0
+#define _FP_NANSIGN_D 0
+#define _FP_NANSIGN_Q 0
+
+#define _FP_KEEPNANFRACP 1
+
+/* If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+/* For _Qp_* and _Q_*, this should prefer X, for
+ * CPU instruction emulation this should prefer Y.
+ * (see SPAMv9 B.2.2 section).
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \
+ do { \
+ if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs) \
+ && !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)) \
+ { \
+ R##_s = X##_s; \
+ _FP_FRAC_COPY_##wc(R,X); \
+ } \
+ else \
+ { \
+ R##_s = Y##_s; \
+ _FP_FRAC_COPY_##wc(R,Y); \
+ } \
+ R##_c = FP_CLS_NAN; \
+ } while (0)
+
+/* Some assembly to speed things up. */
+#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) \
+ __asm__ ("addcc %r7,%8,%2\n\t" \
+ "addxcc %r5,%6,%1\n\t" \
+ "addx %r3,%4,%0\n" \
+ : "=r" ((USItype)(r2)), \
+ "=&r" ((USItype)(r1)), \
+ "=&r" ((USItype)(r0)) \
+ : "%rJ" ((USItype)(x2)), \
+ "rI" ((USItype)(y2)), \
+ "%rJ" ((USItype)(x1)), \
+ "rI" ((USItype)(y1)), \
+ "%rJ" ((USItype)(x0)), \
+ "rI" ((USItype)(y0)) \
+ : "cc")
+
+#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) \
+ __asm__ ("subcc %r7,%8,%2\n\t" \
+ "subxcc %r5,%6,%1\n\t" \
+ "subx %r3,%4,%0\n" \
+ : "=r" ((USItype)(r2)), \
+ "=&r" ((USItype)(r1)), \
+ "=&r" ((USItype)(r0)) \
+ : "%rJ" ((USItype)(x2)), \
+ "rI" ((USItype)(y2)), \
+ "%rJ" ((USItype)(x1)), \
+ "rI" ((USItype)(y1)), \
+ "%rJ" ((USItype)(x0)), \
+ "rI" ((USItype)(y0)) \
+ : "cc")
+
+#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \
+ do { \
+ /* We need to fool gcc, as we need to pass more than 10 \
+ input/outputs. */ \
+ register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2"); \
+ __asm__ __volatile__ ( \
+ "addcc %r8,%9,%1\n\t" \
+ "addxcc %r6,%7,%0\n\t" \
+ "addxcc %r4,%5,%%g2\n\t" \
+ "addx %r2,%3,%%g1\n\t" \
+ : "=&r" ((USItype)(r1)), \
+ "=&r" ((USItype)(r0)) \
+ : "%rJ" ((USItype)(x3)), \
+ "rI" ((USItype)(y3)), \
+ "%rJ" ((USItype)(x2)), \
+ "rI" ((USItype)(y2)), \
+ "%rJ" ((USItype)(x1)), \
+ "rI" ((USItype)(y1)), \
+ "%rJ" ((USItype)(x0)), \
+ "rI" ((USItype)(y0)) \
+ : "cc", "g1", "g2"); \
+ __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2)); \
+ r3 = _t1; r2 = _t2; \
+ } while (0)
+
+#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \
+ do { \
+ /* We need to fool gcc, as we need to pass more than 10 \
+ input/outputs. */ \
+ register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2"); \
+ __asm__ __volatile__ ( \
+ "subcc %r8,%9,%1\n\t" \
+ "subxcc %r6,%7,%0\n\t" \
+ "subxcc %r4,%5,%%g2\n\t" \
+ "subx %r2,%3,%%g1\n\t" \
+ : "=&r" ((USItype)(r1)), \
+ "=&r" ((USItype)(r0)) \
+ : "%rJ" ((USItype)(x3)), \
+ "rI" ((USItype)(y3)), \
+ "%rJ" ((USItype)(x2)), \
+ "rI" ((USItype)(y2)), \
+ "%rJ" ((USItype)(x1)), \
+ "rI" ((USItype)(y1)), \
+ "%rJ" ((USItype)(x0)), \
+ "rI" ((USItype)(y0)) \
+ : "cc", "g1", "g2"); \
+ __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2)); \
+ r3 = _t1; r2 = _t2; \
+ } while (0)
+
+#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0)
+
+#define __FP_FRAC_DEC_4(x3,x2,x1,x0,y3,y2,y1,y0) __FP_FRAC_SUB_4(x3,x2,x1,x0,x3,x2,x1,x0,y3,y2,y1,y0)
+
+#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i) \
+ __asm__ ("addcc %3,%4,%3\n\t" \
+ "addxcc %2,%%g0,%2\n\t" \
+ "addxcc %1,%%g0,%1\n\t" \
+ "addx %0,%%g0,%0\n\t" \
+ : "=&r" ((USItype)(x3)), \
+ "=&r" ((USItype)(x2)), \
+ "=&r" ((USItype)(x1)), \
+ "=&r" ((USItype)(x0)) \
+ : "rI" ((USItype)(i)), \
+ "0" ((USItype)(x3)), \
+ "1" ((USItype)(x2)), \
+ "2" ((USItype)(x1)), \
+ "3" ((USItype)(x0)) \
+ : "cc")
+
+#ifndef CONFIG_SMP
+extern struct task_struct *last_task_used_math;
+#endif
+
+/* Obtain the current rounding mode. */
+#ifndef FP_ROUNDMODE
+#ifdef CONFIG_SMP
+#define FP_ROUNDMODE ((current->thread.fsr >> 30) & 0x3)
+#else
+#define FP_ROUNDMODE ((last_task_used_math->thread.fsr >> 30) & 0x3)
+#endif
+#endif
+
+/* Exception flags. */
+#define FP_EX_INVALID (1 << 4)
+#define FP_EX_OVERFLOW (1 << 3)
+#define FP_EX_UNDERFLOW (1 << 2)
+#define FP_EX_DIVZERO (1 << 1)
+#define FP_EX_INEXACT (1 << 0)
+
+#define FP_HANDLE_EXCEPTIONS return _fex
+
+#ifdef CONFIG_SMP
+#define FP_INHIBIT_RESULTS ((current->thread.fsr >> 23) & _fex)
+#else
+#define FP_INHIBIT_RESULTS ((last_task_used_math->thread.fsr >> 23) & _fex)
+#endif
+
+#endif
diff --git a/include/asm-sparc/shmbuf.h b/include/asm-sparc/shmbuf.h
new file mode 100644
index 000000000000..1ff9da8bec73
--- /dev/null
+++ b/include/asm-sparc/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _SPARC_SHMBUF_H
+#define _SPARC_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ unsigned int __pad1;
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned int __pad2;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned int __pad3;
+ __kernel_time_t shm_ctime; /* last change time */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _SPARC_SHMBUF_H */
diff --git a/include/asm-sparc/shmparam.h b/include/asm-sparc/shmparam.h
new file mode 100644
index 000000000000..bb93a6f74a38
--- /dev/null
+++ b/include/asm-sparc/shmparam.h
@@ -0,0 +1,12 @@
+/* $Id: shmparam.h,v 1.6 1999/12/09 10:32:41 davem Exp $ */
+#ifndef _ASMSPARC_SHMPARAM_H
+#define _ASMSPARC_SHMPARAM_H
+
+#define __ARCH_FORCE_SHMLBA 1
+
+extern int vac_cache_size;
+#define SHMLBA (vac_cache_size ? vac_cache_size : \
+ (sparc_cpu_model == sun4c ? (64 * 1024) : \
+ (sparc_cpu_model == sun4 ? (128 * 1024) : PAGE_SIZE)))
+
+#endif /* _ASMSPARC_SHMPARAM_H */
diff --git a/include/asm-sparc/sigcontext.h b/include/asm-sparc/sigcontext.h
new file mode 100644
index 000000000000..7fa2c7d01ab4
--- /dev/null
+++ b/include/asm-sparc/sigcontext.h
@@ -0,0 +1,63 @@
+/* $Id: sigcontext.h,v 1.14 1999/09/06 08:22:05 jj Exp $ */
+#ifndef __SPARC_SIGCONTEXT_H
+#define __SPARC_SIGCONTEXT_H
+
+#ifdef __KERNEL__
+#include <asm/ptrace.h>
+
+#ifndef __ASSEMBLY__
+
+#define __SUNOS_MAXWIN 31
+
+/* This is what SunOS does, so shall I. */
+struct sigcontext {
+ int sigc_onstack; /* state to restore */
+ int sigc_mask; /* sigmask to restore */
+ int sigc_sp; /* stack pointer */
+ int sigc_pc; /* program counter */
+ int sigc_npc; /* next program counter */
+ int sigc_psr; /* for condition codes etc */
+ int sigc_g1; /* User uses these two registers */
+ int sigc_o0; /* within the trampoline code. */
+
+ /* Now comes information regarding the users window set
+ * at the time of the signal.
+ */
+ int sigc_oswins; /* outstanding windows */
+
+ /* stack ptrs for each regwin buf */
+ char *sigc_spbuf[__SUNOS_MAXWIN];
+
+ /* Windows to restore after signal */
+ struct {
+ unsigned long locals[8];
+ unsigned long ins[8];
+ } sigc_wbuf[__SUNOS_MAXWIN];
+};
+
+typedef struct {
+ struct {
+ unsigned long psr;
+ unsigned long pc;
+ unsigned long npc;
+ unsigned long y;
+ unsigned long u_regs[16]; /* globals and ins */
+ } si_regs;
+ int si_mask;
+} __siginfo_t;
+
+typedef struct {
+ unsigned long si_float_regs [32];
+ unsigned long si_fsr;
+ unsigned long si_fpqdepth;
+ struct {
+ unsigned long *insn_addr;
+ unsigned long insn;
+ } si_fpqueue [16];
+} __siginfo_fpu_t;
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* (__KERNEL__) */
+
+#endif /* !(__SPARC_SIGCONTEXT_H) */
diff --git a/include/asm-sparc/siginfo.h b/include/asm-sparc/siginfo.h
new file mode 100644
index 000000000000..2c3ea8b22448
--- /dev/null
+++ b/include/asm-sparc/siginfo.h
@@ -0,0 +1,21 @@
+/* $Id: siginfo.h,v 1.9 2002/02/08 03:57:18 davem Exp $
+ * siginfo.c:
+ */
+
+#ifndef _SPARC_SIGINFO_H
+#define _SPARC_SIGINFO_H
+
+#define __ARCH_SI_UID_T unsigned int
+#define __ARCH_SI_TRAPNO
+
+#include <asm-generic/siginfo.h>
+
+#define SI_NOINFO 32767 /* no information in siginfo_t */
+
+/*
+ * SIGEMT si_codes
+ */
+#define EMT_TAGOVF (__SI_FAULT|1) /* tag overflow */
+#define NSIGEMT 1
+
+#endif /* !(_SPARC_SIGINFO_H) */
diff --git a/include/asm-sparc/signal.h b/include/asm-sparc/signal.h
new file mode 100644
index 000000000000..d8211cb6e6b4
--- /dev/null
+++ b/include/asm-sparc/signal.h
@@ -0,0 +1,234 @@
+/* $Id: signal.h,v 1.35 1999/09/06 08:22:04 jj Exp $ */
+#ifndef _ASMSPARC_SIGNAL_H
+#define _ASMSPARC_SIGNAL_H
+
+#include <asm/sigcontext.h>
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/personality.h>
+#include <linux/types.h>
+#endif
+#endif
+
+/* On the Sparc the signal handlers get passed a 'sub-signal' code
+ * for certain signal types, which we document here.
+ */
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SUBSIG_STACK 0
+#define SUBSIG_ILLINST 2
+#define SUBSIG_PRIVINST 3
+#define SUBSIG_BADTRAP(t) (0x80 + (t))
+
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+
+#define SIGEMT 7
+#define SUBSIG_TAG 10
+
+#define SIGFPE 8
+#define SUBSIG_FPDISABLED 0x400
+#define SUBSIG_FPERROR 0x404
+#define SUBSIG_FPINTOVFL 0x001
+#define SUBSIG_FPSTSIG 0x002
+#define SUBSIG_IDIVZERO 0x014
+#define SUBSIG_FPINEXACT 0x0c4
+#define SUBSIG_FPDIVZERO 0x0c8
+#define SUBSIG_FPUNFLOW 0x0cc
+#define SUBSIG_FPOPERROR 0x0d0
+#define SUBSIG_FPOVFLOW 0x0d4
+
+#define SIGKILL 9
+#define SIGBUS 10
+#define SUBSIG_BUSTIMEOUT 1
+#define SUBSIG_ALIGNMENT 2
+#define SUBSIG_MISCERROR 5
+
+#define SIGSEGV 11
+#define SUBSIG_NOMAPPING 3
+#define SUBSIG_PROTECTION 4
+#define SUBSIG_SEGERROR 5
+
+#define SIGSYS 12
+
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGURG 16
+
+/* SunOS values which deviate from the Linux/i386 ones */
+#define SIGSTOP 17
+#define SIGTSTP 18
+#define SIGCONT 19
+#define SIGCHLD 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGIO 23
+#define SIGPOLL SIGIO /* SysV name for SIGIO */
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGLOST 29
+#define SIGPWR SIGLOST
+#define SIGUSR1 30
+#define SIGUSR2 31
+
+/* Most things should be clean enough to redefine this at will, if care
+ * is taken to make libc match.
+ */
+
+#define __OLD_NSIG 32
+#define __NEW_NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (__NEW_NSIG / _NSIG_BPW)
+
+#define SIGRTMIN 32
+#define SIGRTMAX __NEW_NSIG
+
+#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
+#define _NSIG __NEW_NSIG
+#define __new_sigset_t sigset_t
+#define __new_sigaction sigaction
+#define __old_sigset_t old_sigset_t
+#define __old_sigaction old_sigaction
+#else
+#define _NSIG __OLD_NSIG
+#define __old_sigset_t sigset_t
+#define __old_sigaction sigaction
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long __old_sigset_t;
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} __new_sigset_t;
+
+
+#ifdef __KERNEL__
+/* A SunOS sigstack */
+struct sigstack {
+ char *the_stack;
+ int cur_status;
+};
+#endif
+
+/* Sigvec flags */
+#define _SV_SSTACK 1u /* This signal handler should use sig-stack */
+#define _SV_INTR 2u /* Sig return should not restart system call */
+#define _SV_RESET 4u /* Set handler to SIG_DFL upon taken signal */
+#define _SV_IGNCHILD 8u /* Do not send SIGCHLD */
+
+/*
+ * sa_flags values: SA_STACK is not currently supported, but will allow the
+ * usage of signal stacks by using the (now obsolete) sa_restorer field in
+ * the sigaction structure as a stack pointer. This is now possible due to
+ * the changes in signal handling. LBT 010493.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_SHIRQ flag is for shared interrupt support on PCI and EISA.
+ */
+#define SA_NOCLDSTOP _SV_IGNCHILD
+#define SA_STACK _SV_SSTACK
+#define SA_ONSTACK _SV_SSTACK
+#define SA_RESTART _SV_INTR
+#define SA_ONESHOT _SV_RESET
+#define SA_INTERRUPT 0x10u
+#define SA_NOMASK 0x20u
+#define SA_SHIRQ 0x40u
+#define SA_NOCLDWAIT 0x100u
+#define SA_SIGINFO 0x200u
+
+#define SIG_BLOCK 0x01 /* for blocking signals */
+#define SIG_UNBLOCK 0x02 /* for unblocking signals */
+#define SIG_SETMASK 0x04 /* for setting the signal mask */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 4096
+#define SIGSTKSZ 16384
+
+#ifdef __KERNEL__
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ *
+ * DJHR
+ * SA_STATIC_ALLOC is used for the SPARC system to indicate that this
+ * interrupt handler's irq structure should be statically allocated
+ * by the request_irq routine.
+ * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge
+ * of interrupt usage and that sucks. Also without a flag like this
+ * it may be possible for the free_irq routine to attempt to free
+ * statically allocated data.. which is NOT GOOD.
+ *
+ */
+#define SA_PROBE SA_ONESHOT
+#define SA_SAMPLE_RANDOM SA_RESTART
+#define SA_STATIC_ALLOC 0x80
+#endif
+
+/* Type of a signal handler. */
+#ifdef __KERNEL__
+typedef void (*__sighandler_t)(int, int, struct sigcontext *, char *);
+#else
+typedef void (*__sighandler_t)(int);
+#endif
+
+#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
+#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
+#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
+
+#ifdef __KERNEL__
+struct __new_sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void); /* Not used by Linux/SPARC */
+ __new_sigset_t sa_mask;
+};
+
+struct k_sigaction {
+ struct __new_sigaction sa;
+ void __user *ka_restorer;
+};
+
+struct __old_sigaction {
+ __sighandler_t sa_handler;
+ __old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer) (void); /* not used by Linux/SPARC */
+};
+
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+struct sparc_deliver_cookie {
+ int restart_syscall;
+ unsigned long orig_i0;
+};
+
+struct pt_regs;
+extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_ASMSPARC_SIGNAL_H) */
diff --git a/include/asm-sparc/smp.h b/include/asm-sparc/smp.h
new file mode 100644
index 000000000000..f986c0d0922a
--- /dev/null
+++ b/include/asm-sparc/smp.h
@@ -0,0 +1,176 @@
+/* smp.h: Sparc specific SMP stuff.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SMP_H
+#define _SPARC_SMP_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/head.h>
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cpumask.h>
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_SMP
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+#include <asm/asi.h>
+#include <asm/atomic.h>
+
+/*
+ * Private routines/data
+ */
+
+extern unsigned char boot_cpu_id;
+extern cpumask_t phys_cpu_present_map;
+#define cpu_possible_map phys_cpu_present_map
+
+typedef void (*smpfunc_t)(unsigned long, unsigned long, unsigned long,
+ unsigned long, unsigned long);
+
+/*
+ * General functions that each host system must provide.
+ */
+
+void sun4m_init_smp(void);
+void sun4d_init_smp(void);
+
+void smp_callin(void);
+void smp_boot_cpus(void);
+void smp_store_cpu_info(int);
+
+struct seq_file;
+void smp_bogo(struct seq_file *);
+void smp_info(struct seq_file *);
+
+BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, smp_message_pass, int, int, unsigned long, int)
+BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void)
+BTFIXUPDEF_BLACKBOX(hard_smp_processor_id)
+BTFIXUPDEF_BLACKBOX(load_current)
+
+#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5)
+#define smp_message_pass(target,msg,data,wait) BTFIXUP_CALL(smp_message_pass)(target,msg,data,wait)
+
+extern __inline__ void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); }
+extern __inline__ void xc1(smpfunc_t func, unsigned long arg1)
+{ smp_cross_call(func, arg1, 0, 0, 0, 0); }
+extern __inline__ void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2)
+{ smp_cross_call(func, arg1, arg2, 0, 0, 0); }
+extern __inline__ void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+ unsigned long arg3)
+{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); }
+extern __inline__ void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+ unsigned long arg3, unsigned long arg4)
+{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); }
+extern __inline__ void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+ unsigned long arg3, unsigned long arg4, unsigned long arg5)
+{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); }
+
+extern __inline__ int smp_call_function(void (*func)(void *info), void *info, int nonatomic, int wait)
+{
+ xc1((smpfunc_t)func, (unsigned long)info);
+ return 0;
+}
+
+extern __volatile__ int __cpu_number_map[NR_CPUS];
+extern __volatile__ int __cpu_logical_map[NR_CPUS];
+
+extern __inline__ int cpu_logical_map(int cpu)
+{
+ return __cpu_logical_map[cpu];
+}
+extern __inline__ int cpu_number_map(int cpu)
+{
+ return __cpu_number_map[cpu];
+}
+
+extern __inline__ int hard_smp4m_processor_id(void)
+{
+ int cpuid;
+
+ __asm__ __volatile__("rd %%tbr, %0\n\t"
+ "srl %0, 12, %0\n\t"
+ "and %0, 3, %0\n\t" :
+ "=&r" (cpuid));
+ return cpuid;
+}
+
+extern __inline__ int hard_smp4d_processor_id(void)
+{
+ int cpuid;
+
+ __asm__ __volatile__("lda [%%g0] %1, %0\n\t" :
+ "=&r" (cpuid) : "i" (ASI_M_VIKING_TMP1));
+ return cpuid;
+}
+
+#ifndef MODULE
+extern __inline__ int hard_smp_processor_id(void)
+{
+ int cpuid;
+
+ /* Black box - sun4m
+ __asm__ __volatile__("rd %%tbr, %0\n\t"
+ "srl %0, 12, %0\n\t"
+ "and %0, 3, %0\n\t" :
+ "=&r" (cpuid));
+ - sun4d
+ __asm__ __volatile__("lda [%g0] ASI_M_VIKING_TMP1, %0\n\t"
+ "nop; nop" :
+ "=&r" (cpuid));
+ See btfixup.h and btfixupprep.c to understand how a blackbox works.
+ */
+ __asm__ __volatile__("sethi %%hi(___b_hard_smp_processor_id), %0\n\t"
+ "sethi %%hi(boot_cpu_id), %0\n\t"
+ "ldub [%0 + %%lo(boot_cpu_id)], %0\n\t" :
+ "=&r" (cpuid));
+ return cpuid;
+}
+#else
+extern __inline__ int hard_smp_processor_id(void)
+{
+ int cpuid;
+
+ __asm__ __volatile__("mov %%o7, %%g1\n\t"
+ "call ___f___hard_smp_processor_id\n\t"
+ " nop\n\t"
+ "mov %%g2, %0\n\t" : "=r"(cpuid) : : "g1", "g2");
+ return cpuid;
+}
+#endif
+
+#define smp_processor_id() (current_thread_info()->cpu)
+
+#define prof_multiplier(__cpu) cpu_data(__cpu).multiplier
+#define prof_counter(__cpu) cpu_data(__cpu).counter
+
+#endif /* !(__ASSEMBLY__) */
+
+/* Sparc specific messages. */
+#define MSG_CROSS_CALL 0x0005 /* run func on cpus */
+
+/* Empirical PROM processor mailbox constants. If the per-cpu mailbox
+ * contains something other than one of these then the ipi is from
+ * Linux's active_kernel_processor. This facility exists so that
+ * the boot monitor can capture all the other cpus when one catches
+ * a watchdog reset or the user enters the monitor using L1-A keys.
+ */
+#define MBOX_STOPCPU 0xFB
+#define MBOX_IDLECPU 0xFC
+#define MBOX_IDLECPU2 0xFD
+#define MBOX_STOPCPU2 0xFE
+
+#endif /* SMP */
+
+#define NO_PROC_ID 0xFF
+
+#endif /* !(_SPARC_SMP_H) */
diff --git a/include/asm-sparc/smpprim.h b/include/asm-sparc/smpprim.h
new file mode 100644
index 000000000000..9b9c28ed748e
--- /dev/null
+++ b/include/asm-sparc/smpprim.h
@@ -0,0 +1,54 @@
+/* $Id: smpprim.h,v 1.5 1996/08/29 09:48:49 davem Exp $
+ * smpprim.h: SMP locking primitives on the Sparc
+ *
+ * God knows we won't be actually using this code for some time
+ * but I thought I'd write it since I knew how.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_SMPPRIM_H
+#define __SPARC_SMPPRIM_H
+
+/* Test and set the unsigned byte at ADDR to 1. Returns the previous
+ * value. On the Sparc we use the ldstub instruction since it is
+ * atomic.
+ */
+
+extern __inline__ __volatile__ char test_and_set(void *addr)
+{
+ char state = 0;
+
+ __asm__ __volatile__("ldstub [%0], %1 ! test_and_set\n\t"
+ "=r" (addr), "=r" (state) :
+ "0" (addr), "1" (state) : "memory");
+
+ return state;
+}
+
+/* Initialize a spin-lock. */
+extern __inline__ __volatile__ smp_initlock(void *spinlock)
+{
+ /* Unset the lock. */
+ *((unsigned char *) spinlock) = 0;
+
+ return;
+}
+
+/* This routine spins until it acquires the lock at ADDR. */
+extern __inline__ __volatile__ smp_lock(void *addr)
+{
+ while(test_and_set(addr) == 0xff)
+ ;
+
+ /* We now have the lock */
+ return;
+}
+
+/* This routine releases the lock at ADDR. */
+extern __inline__ __volatile__ smp_unlock(void *addr)
+{
+ *((unsigned char *) addr) = 0;
+}
+
+#endif /* !(__SPARC_SMPPRIM_H) */
diff --git a/include/asm-sparc/socket.h b/include/asm-sparc/socket.h
new file mode 100644
index 000000000000..c1154e3ecfdf
--- /dev/null
+++ b/include/asm-sparc/socket.h
@@ -0,0 +1,55 @@
+/* $Id: socket.h,v 1.17 2001/06/13 16:25:03 davem Exp $ */
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET 0xffff
+
+#define SO_DEBUG 0x0001
+#define SO_PASSCRED 0x0002
+#define SO_REUSEADDR 0x0004
+#define SO_KEEPALIVE 0x0008
+#define SO_DONTROUTE 0x0010
+#define SO_BROADCAST 0x0020
+#define SO_PEERCRED 0x0040
+#define SO_LINGER 0x0080
+#define SO_OOBINLINE 0x0100
+/* To add :#define SO_REUSEPORT 0x0200 */
+#define SO_BSDCOMPAT 0x0400
+#define SO_RCVLOWAT 0x0800
+#define SO_SNDLOWAT 0x1000
+#define SO_RCVTIMEO 0x2000
+#define SO_SNDTIMEO 0x4000
+#define SO_ACCEPTCONN 0x8000
+
+/* wha!??? */
+#define SO_DONTLINGER (~SO_LINGER) /* Older SunOS compat. hack */
+
+#define SO_SNDBUF 0x1001
+#define SO_RCVBUF 0x1002
+#define SO_ERROR 0x1007
+#define SO_TYPE 0x1008
+
+/* Linux specific, keep the same. */
+#define SO_NO_CHECK 0x000b
+#define SO_PRIORITY 0x000c
+
+#define SO_BINDTODEVICE 0x000d
+
+#define SO_ATTACH_FILTER 0x001a
+#define SO_DETACH_FILTER 0x001b
+
+#define SO_PEERNAME 0x001c
+#define SO_TIMESTAMP 0x001d
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_PEERSEC 0x100e
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 0x5001
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 0x5002
+#define SO_SECURITY_ENCRYPTION_NETWORK 0x5004
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-sparc/sockios.h b/include/asm-sparc/sockios.h
new file mode 100644
index 000000000000..0c01b597b06f
--- /dev/null
+++ b/include/asm-sparc/sockios.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_SPARC_SOCKIOS_H
+#define _ASM_SPARC_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp */
+
+#endif /* !(_ASM_SPARC_SOCKIOS_H) */
+
diff --git a/include/asm-sparc/solerrno.h b/include/asm-sparc/solerrno.h
new file mode 100644
index 000000000000..8abce7e4639f
--- /dev/null
+++ b/include/asm-sparc/solerrno.h
@@ -0,0 +1,132 @@
+/* $Id: solerrno.h,v 1.5 1996/04/25 06:13:32 davem Exp $
+ * solerrno.h: Solaris error return codes for compatibility.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SOLERRNO_H
+#define _SPARC_SOLERRNO_H
+
+#define SOL_EPERM 1 /* Required superuser access perms */
+#define SOL_ENOENT 2 /* File or directory does not exist */
+#define SOL_ESRCH 3 /* Process did not exist */
+#define SOL_EINTR 4 /* System call was interrupted */
+#define SOL_EIO 5 /* An i/o error occurred */
+#define SOL_ENXIO 6 /* Device or Address does not exist */
+#define SOL_E2BIG 7 /* Too many arguments were given */
+#define SOL_ENOEXEC 8 /* Header of executable was munged */
+#define SOL_EBADF 9 /* Bogus file number */
+#define SOL_ECHILD 10 /* No children of process exist */
+#define SOL_EAGAIN 11 /* beep beep, "try again later" */
+#define SOL_ENOMEM 12 /* No memory available */
+#define SOL_EACCES 13 /* Access not allowed */
+#define SOL_EFAULT 14 /* Address passed was invalid */
+#define SOL_ENOTBLK 15 /* blkdev op on non-block device */
+#define SOL_EBUSY 16 /* Mounted device was busy */
+#define SOL_EEXIST 17 /* File specified already exists */
+#define SOL_EXDEV 18 /* Link request across diff devices */
+#define SOL_ENODEV 19 /* Device does not exist on system */
+#define SOL_ENOTDIR 20 /* Dir operation on non-directory */
+#define SOL_EISDIR 21 /* File was of directory type */
+#define SOL_EINVAL 22 /* Argument passed was invalid */
+#define SOL_ENFILE 23 /* No more room in file table */
+#define SOL_EMFILE 24 /* Proc has too many files open */
+#define SOL_ENOTTY 25 /* Ioctl was invalid for req device */
+#define SOL_ETXTBSY 26 /* Text file in busy state */
+#define SOL_EFBIG 27 /* Too big of a file for operation */
+#define SOL_ENOSPC 28 /* Disk is full */
+#define SOL_ESPIPE 29 /* Seek attempted on non-seeking dev*/
+#define SOL_EROFS 30 /* Write attempted on read-only fs */
+#define SOL_EMLINK 31 /* Too many links in file search */
+#define SOL_EPIPE 32 /* Call a plumber */
+#define SOL_EDOM 33 /* Argument was out of fct domain */
+#define SOL_ERANGE 34 /* Could not represent math result */
+#define SOL_ENOMSG 35 /* Message of req type doesn't exist */
+#define SOL_EIDRM 36 /* Identifier has been removed */
+#define SOL_ECHRNG 37 /* Req channel number out of range */
+#define SOL_EL2NSYNC 38 /* Could not sync at run level 2 */
+#define SOL_EL3HLT 39 /* Halted at run level 3 */
+#define SOL_EL3RST 40 /* Reset at run level 3 */
+#define SOL_ELNRNG 41 /* Out of range link number */
+#define SOL_EUNATCH 42 /* Driver for protocol not attached */
+#define SOL_ENOCSI 43 /* CSI structure not around */
+#define SOL_EL2HLT 44 /* Halted at run level 2 */
+#define SOL_EDEADLK 45 /* Deadlock condition detected */
+#define SOL_ENOLCK 46 /* Record locks unavailable */
+#define SOL_ECANCELED 47 /* Cancellation of oper. happened */
+#define SOL_ENOTSUP 48 /* Attempt of unsupported operation */
+#define SOL_EDQUOT 49 /* Users disk quota exceeded */
+#define SOL_EBADE 50 /* Invalid exchange */
+#define SOL_EBADR 51 /* Request descriptor was invalid */
+#define SOL_EXFULL 52 /* Full exchange */
+#define SOL_ENOANO 53 /* ano does not exist */
+#define SOL_EBADRQC 54 /* Req code was invalid */
+#define SOL_EBADSLT 55 /* Bad slot number */
+#define SOL_EDEADLOCK 56 /* Deadlock in fs error */
+#define SOL_EBFONT 57 /* Font file format invalid */
+/* YOW, I LOVE SYSV STREAMS!!!! */
+#define SOL_ENOSTR 60 /* Stream-op on non-stream dev */
+#define SOL_ENODATA 61 /* No data avail at this time */
+#define SOL_ETIME 62 /* Expiration of time occurred */
+#define SOL_ENOSR 63 /* Streams resources exhausted */
+#define SOL_ENONET 64 /* No network connected */
+#define SOL_ENOPKG 65 /* Non-installed package */
+#define SOL_EREMOTE 66 /* Object was on remote machine */
+#define SOL_ENOLINK 67 /* Cut link */
+#define SOL_EADV 68 /* Error in advertise */
+#define SOL_ESRMNT 69 /* Some magic srmount problem */
+#define SOL_ECOMM 70 /* During send, comm error occurred */
+#define SOL_EPROTO 71 /* Protocol botch */
+#define SOL_EMULTIHOP 74 /* Multihop attempted */
+#define SOL_EBADMSG 77 /* Message was unreadable */
+#define SOL_ENAMETOOLONG 78 /* Too long of a path name */
+#define SOL_EOVERFLOW 79 /* Data type too small for datum */
+#define SOL_ENOTUNIQ 80 /* Logical name was not unique */
+#define SOL_EBADFD 81 /* Op cannot be performed on fd */
+#define SOL_EREMCHG 82 /* Remote address is now different */
+#define SOL_ELIBACC 83 /* Shared lib could not be accessed */
+#define SOL_ELIBBAD 84 /* ShLib is corrupted in some way */
+#define SOL_ELIBSCN 85 /* A.out ShLib problems */
+#define SOL_ELIBMAX 86 /* Exceeded ShLib linkage limit */
+#define SOL_ELIBEXEC 87 /* Execution of ShLib attempted */
+#define SOL_EILSEQ 88 /* Bad byte sequence found */
+#define SOL_ENOSYS 89 /* Invalid filesystem operation */
+#define SOL_ELOOP 90 /* Detected loop in symbolic links */
+#define SOL_ERESTART 91 /* System call is restartable */
+#define SOL_ESTRPIPE 92 /* Do not sleep in head of stream */
+#define SOL_ENOTEMPTY 93 /* Rmdir of non-empty directory */
+#define SOL_EUSERS 94 /* Over abundance of users for ufs */
+#define SOL_ENOTSOCK 95 /* Sock-op on non-sock */
+#define SOL_EDESTADDRREQ 96 /* No dest addr given, but needed */
+#define SOL_EMSGSIZE 97 /* Msg too big */
+#define SOL_EPROTOTYPE 98 /* Bad socket protocol */
+#define SOL_ENOPROTOOPT 99 /* Unavailable protocol */
+#define SOL_EPROTONOSUPPORT 120 /* Unsupported protocol */
+#define SOL_ESOCKTNOSUPPORT 121 /* Unsupported socket type */
+#define SOL_EOPNOTSUPP 122 /* Unsupported sock-op */
+#define SOL_EPFNOSUPPORT 123 /* Unsupported protocol family */
+#define SOL_EAFNOSUPPORT 124 /* Unsup addr family for protocol */
+#define SOL_EADDRINUSE 125 /* Req addr is already in use */
+#define SOL_EADDRNOTAVAIL 126 /* Req addr not available right now */
+#define SOL_ENETDOWN 127 /* Your subnet is on fire */
+#define SOL_ENETUNREACH 128 /* Someone playing with gateway and */
+ /* did not tell you he was going to */
+#define SOL_ENETRESET 129 /* Buy less-buggy ethernet cards */
+#define SOL_ECONNABORTED 130 /* Aborted connection due to sw */
+#define SOL_ECONNRESET 131 /* Your peers reset your connection */
+#define SOL_ENOBUFS 132 /* No buffer space available */
+#define SOL_EISCONN 133 /* Connect on already connected */
+ /* socket attempted */
+#define SOL_ENOTCONN 134 /* Comm on non-connected socket */
+#define SOL_ESHUTDOWN 143 /* Op attempted after sock-shutdown */
+#define SOL_ETOOMANYREFS 144 /* Reference limit exceeded */
+#define SOL_ETIMEDOUT 145 /* Timed out connection */
+#define SOL_ECONNREFUSED 146 /* Connection refused by remote host*/
+#define SOL_EHOSTDOWN 147 /* Remote host is up in flames */
+#define SOL_EHOSTUNREACH 148 /* Make a left at Easton Ave..... */
+#define SOL_EWOULDBLOCK EAGAIN /* Just an alias */
+#define SOL_EALREADY 149 /* Operation is already occurring */
+#define SOL_EINPROGRESS 150 /* Operation is happening now */
+#define SOL_ESTALE 151 /* Fungus growth on NFS file handle */
+
+#endif /* !(_SPARC_SOLERRNO_H) */
diff --git a/include/asm-sparc/spinlock.h b/include/asm-sparc/spinlock.h
new file mode 100644
index 000000000000..0cbd87ad4912
--- /dev/null
+++ b/include/asm-sparc/spinlock.h
@@ -0,0 +1,238 @@
+/* spinlock.h: 32-bit Sparc spinlock support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_SPINLOCK_H
+#define __SPARC_SPINLOCK_H
+
+#include <linux/threads.h> /* For NR_CPUS */
+
+#ifndef __ASSEMBLY__
+
+#include <asm/psr.h>
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+struct _spinlock_debug {
+ unsigned char lock;
+ unsigned long owner_pc;
+#ifdef CONFIG_PREEMPT
+ unsigned int break_lock;
+#endif
+};
+typedef struct _spinlock_debug spinlock_t;
+
+#define SPIN_LOCK_UNLOCKED (spinlock_t) { 0, 0 }
+#define spin_lock_init(lp) do { *(lp)= SPIN_LOCK_UNLOCKED; } while(0)
+#define spin_is_locked(lp) (*((volatile unsigned char *)(&((lp)->lock))) != 0)
+#define spin_unlock_wait(lp) do { barrier(); } while(*(volatile unsigned char *)(&(lp)->lock))
+
+extern void _do_spin_lock(spinlock_t *lock, char *str);
+extern int _spin_trylock(spinlock_t *lock);
+extern void _do_spin_unlock(spinlock_t *lock);
+
+#define _raw_spin_trylock(lp) _spin_trylock(lp)
+#define _raw_spin_lock(lock) _do_spin_lock(lock, "spin_lock")
+#define _raw_spin_unlock(lock) _do_spin_unlock(lock)
+
+struct _rwlock_debug {
+ volatile unsigned int lock;
+ unsigned long owner_pc;
+ unsigned long reader_pc[NR_CPUS];
+#ifdef CONFIG_PREEMPT
+ unsigned int break_lock;
+#endif
+};
+typedef struct _rwlock_debug rwlock_t;
+
+#define RW_LOCK_UNLOCKED (rwlock_t) { 0, 0, {0} }
+
+#define rwlock_init(lp) do { *(lp)= RW_LOCK_UNLOCKED; } while(0)
+
+extern void _do_read_lock(rwlock_t *rw, char *str);
+extern void _do_read_unlock(rwlock_t *rw, char *str);
+extern void _do_write_lock(rwlock_t *rw, char *str);
+extern void _do_write_unlock(rwlock_t *rw);
+
+#define _raw_read_lock(lock) \
+do { unsigned long flags; \
+ local_irq_save(flags); \
+ _do_read_lock(lock, "read_lock"); \
+ local_irq_restore(flags); \
+} while(0)
+
+#define _raw_read_unlock(lock) \
+do { unsigned long flags; \
+ local_irq_save(flags); \
+ _do_read_unlock(lock, "read_unlock"); \
+ local_irq_restore(flags); \
+} while(0)
+
+#define _raw_write_lock(lock) \
+do { unsigned long flags; \
+ local_irq_save(flags); \
+ _do_write_lock(lock, "write_lock"); \
+ local_irq_restore(flags); \
+} while(0)
+
+#define _raw_write_unlock(lock) \
+do { unsigned long flags; \
+ local_irq_save(flags); \
+ _do_write_unlock(lock); \
+ local_irq_restore(flags); \
+} while(0)
+
+#else /* !CONFIG_DEBUG_SPINLOCK */
+
+typedef struct {
+ unsigned char lock;
+#ifdef CONFIG_PREEMPT
+ unsigned int break_lock;
+#endif
+} spinlock_t;
+
+#define SPIN_LOCK_UNLOCKED (spinlock_t) { 0 }
+
+#define spin_lock_init(lock) (*((unsigned char *)(lock)) = 0)
+#define spin_is_locked(lock) (*((volatile unsigned char *)(lock)) != 0)
+
+#define spin_unlock_wait(lock) \
+do { \
+ barrier(); \
+} while(*((volatile unsigned char *)lock))
+
+extern __inline__ void _raw_spin_lock(spinlock_t *lock)
+{
+ __asm__ __volatile__(
+ "\n1:\n\t"
+ "ldstub [%0], %%g2\n\t"
+ "orcc %%g2, 0x0, %%g0\n\t"
+ "bne,a 2f\n\t"
+ " ldub [%0], %%g2\n\t"
+ ".subsection 2\n"
+ "2:\n\t"
+ "orcc %%g2, 0x0, %%g0\n\t"
+ "bne,a 2b\n\t"
+ " ldub [%0], %%g2\n\t"
+ "b,a 1b\n\t"
+ ".previous\n"
+ : /* no outputs */
+ : "r" (lock)
+ : "g2", "memory", "cc");
+}
+
+extern __inline__ int _raw_spin_trylock(spinlock_t *lock)
+{
+ unsigned int result;
+ __asm__ __volatile__("ldstub [%1], %0"
+ : "=r" (result)
+ : "r" (lock)
+ : "memory");
+ return (result == 0);
+}
+
+extern __inline__ void _raw_spin_unlock(spinlock_t *lock)
+{
+ __asm__ __volatile__("stb %%g0, [%0]" : : "r" (lock) : "memory");
+}
+
+/* Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ *
+ * XXX This might create some problems with my dual spinlock
+ * XXX scheme, deadlocks etc. -DaveM
+ */
+typedef struct {
+ volatile unsigned int lock;
+#ifdef CONFIG_PREEMPT
+ unsigned int break_lock;
+#endif
+} rwlock_t;
+
+#define RW_LOCK_UNLOCKED (rwlock_t) { 0 }
+
+#define rwlock_init(lp) do { *(lp)= RW_LOCK_UNLOCKED; } while(0)
+
+
+/* Sort of like atomic_t's on Sparc, but even more clever.
+ *
+ * ------------------------------------
+ * | 24-bit counter | wlock | rwlock_t
+ * ------------------------------------
+ * 31 8 7 0
+ *
+ * wlock signifies the one writer is in or somebody is updating
+ * counter. For a writer, if he successfully acquires the wlock,
+ * but counter is non-zero, he has to release the lock and wait,
+ * till both counter and wlock are zero.
+ *
+ * Unfortunately this scheme limits us to ~16,000,000 cpus.
+ */
+extern __inline__ void _read_lock(rwlock_t *rw)
+{
+ register rwlock_t *lp asm("g1");
+ lp = rw;
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___rw_read_enter\n\t"
+ " ldstub [%%g1 + 3], %%g2\n"
+ : /* no outputs */
+ : "r" (lp)
+ : "g2", "g4", "memory", "cc");
+}
+
+#define _raw_read_lock(lock) \
+do { unsigned long flags; \
+ local_irq_save(flags); \
+ _read_lock(lock); \
+ local_irq_restore(flags); \
+} while(0)
+
+extern __inline__ void _read_unlock(rwlock_t *rw)
+{
+ register rwlock_t *lp asm("g1");
+ lp = rw;
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___rw_read_exit\n\t"
+ " ldstub [%%g1 + 3], %%g2\n"
+ : /* no outputs */
+ : "r" (lp)
+ : "g2", "g4", "memory", "cc");
+}
+
+#define _raw_read_unlock(lock) \
+do { unsigned long flags; \
+ local_irq_save(flags); \
+ _read_unlock(lock); \
+ local_irq_restore(flags); \
+} while(0)
+
+extern __inline__ void _raw_write_lock(rwlock_t *rw)
+{
+ register rwlock_t *lp asm("g1");
+ lp = rw;
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___rw_write_enter\n\t"
+ " ldstub [%%g1 + 3], %%g2\n"
+ : /* no outputs */
+ : "r" (lp)
+ : "g2", "g4", "memory", "cc");
+}
+
+#define _raw_write_unlock(rw) do { (rw)->lock = 0; } while(0)
+
+#endif /* CONFIG_DEBUG_SPINLOCK */
+
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* __SPARC_SPINLOCK_H */
diff --git a/include/asm-sparc/stat.h b/include/asm-sparc/stat.h
new file mode 100644
index 000000000000..a5b4272f2894
--- /dev/null
+++ b/include/asm-sparc/stat.h
@@ -0,0 +1,77 @@
+/* $Id: stat.h,v 1.12 2000/08/04 05:35:55 davem Exp $ */
+#ifndef _SPARC_STAT_H
+#define _SPARC_STAT_H
+
+#include <linux/types.h>
+
+struct __old_kernel_stat {
+ unsigned short st_dev;
+ unsigned short st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned long st_size;
+ unsigned long st_atime;
+ unsigned long st_mtime;
+ unsigned long st_ctime;
+};
+
+struct stat {
+ unsigned short st_dev;
+ unsigned long st_ino;
+ unsigned short st_mode;
+ short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ long st_size;
+ long st_atime;
+ unsigned long st_atime_nsec;
+ long st_mtime;
+ unsigned long st_mtime_nsec;
+ long st_ctime;
+ unsigned long st_ctime_nsec;
+ long st_blksize;
+ long st_blocks;
+ unsigned long __unused4[2];
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct stat64 {
+ unsigned long long st_dev;
+
+ unsigned long long st_ino;
+
+ unsigned int st_mode;
+ unsigned int st_nlink;
+
+ unsigned int st_uid;
+ unsigned int st_gid;
+
+ unsigned long long st_rdev;
+
+ unsigned char __pad3[8];
+
+ long long st_size;
+ unsigned int st_blksize;
+
+ unsigned char __pad4[8];
+ unsigned int st_blocks;
+
+ unsigned int st_atime;
+ unsigned int st_atime_nsec;
+
+ unsigned int st_mtime;
+ unsigned int st_mtime_nsec;
+
+ unsigned int st_ctime;
+ unsigned int st_ctime_nsec;
+
+ unsigned int __unused4;
+ unsigned int __unused5;
+};
+
+#endif
diff --git a/include/asm-sparc/statfs.h b/include/asm-sparc/statfs.h
new file mode 100644
index 000000000000..d623f144247d
--- /dev/null
+++ b/include/asm-sparc/statfs.h
@@ -0,0 +1,7 @@
+/* $Id: statfs.h,v 1.4 1996/06/07 00:41:05 ecd Exp $ */
+#ifndef _SPARC_STATFS_H
+#define _SPARC_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/include/asm-sparc/string.h b/include/asm-sparc/string.h
new file mode 100644
index 000000000000..cb1e923356c6
--- /dev/null
+++ b/include/asm-sparc/string.h
@@ -0,0 +1,205 @@
+/* $Id: string.h,v 1.36 2001/12/21 00:54:31 davem Exp $
+ * string.h: External definitions for optimized assembly string
+ * routines for the Linux Kernel.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __SPARC_STRING_H__
+#define __SPARC_STRING_H__
+
+#include <asm/page.h>
+
+/* Really, userland/ksyms should not see any of this stuff. */
+
+#ifdef __KERNEL__
+
+extern void __memmove(void *,const void *,__kernel_size_t);
+extern __kernel_size_t __memcpy(void *,const void *,__kernel_size_t);
+extern __kernel_size_t __memset(void *,int,__kernel_size_t);
+
+#ifndef EXPORT_SYMTAB_STROPS
+
+/* First the mem*() things. */
+#define __HAVE_ARCH_MEMMOVE
+#undef memmove
+#define memmove(_to, _from, _n) \
+({ \
+ void *_t = (_to); \
+ __memmove(_t, (_from), (_n)); \
+ _t; \
+})
+
+#define __HAVE_ARCH_MEMCPY
+
+static inline void *__constant_memcpy(void *to, const void *from, __kernel_size_t n)
+{
+ extern void __copy_1page(void *, const void *);
+
+ if(n <= 32) {
+ __builtin_memcpy(to, from, n);
+ } else if (((unsigned int) to & 7) != 0) {
+ /* Destination is not aligned on the double-word boundary */
+ __memcpy(to, from, n);
+ } else {
+ switch(n) {
+ case PAGE_SIZE:
+ __copy_1page(to, from);
+ break;
+ default:
+ __memcpy(to, from, n);
+ break;
+ }
+ }
+ return to;
+}
+
+static inline void *__nonconstant_memcpy(void *to, const void *from, __kernel_size_t n)
+{
+ __memcpy(to, from, n);
+ return to;
+}
+
+#undef memcpy
+#define memcpy(t, f, n) \
+(__builtin_constant_p(n) ? \
+ __constant_memcpy((t),(f),(n)) : \
+ __nonconstant_memcpy((t),(f),(n)))
+
+#define __HAVE_ARCH_MEMSET
+
+static inline void *__constant_c_and_count_memset(void *s, char c, __kernel_size_t count)
+{
+ extern void bzero_1page(void *);
+ extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+ if(!c) {
+ if(count == PAGE_SIZE)
+ bzero_1page(s);
+ else
+ __bzero(s, count);
+ } else {
+ __memset(s, c, count);
+ }
+ return s;
+}
+
+static inline void *__constant_c_memset(void *s, char c, __kernel_size_t count)
+{
+ extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+ if(!c)
+ __bzero(s, count);
+ else
+ __memset(s, c, count);
+ return s;
+}
+
+static inline void *__nonconstant_memset(void *s, char c, __kernel_size_t count)
+{
+ __memset(s, c, count);
+ return s;
+}
+
+#undef memset
+#define memset(s, c, count) \
+(__builtin_constant_p(c) ? (__builtin_constant_p(count) ? \
+ __constant_c_and_count_memset((s), (c), (count)) : \
+ __constant_c_memset((s), (c), (count))) \
+ : __nonconstant_memset((s), (c), (count)))
+
+#define __HAVE_ARCH_MEMSCAN
+
+#undef memscan
+#define memscan(__arg0, __char, __arg2) \
+({ \
+ extern void *__memscan_zero(void *, size_t); \
+ extern void *__memscan_generic(void *, int, size_t); \
+ void *__retval, *__addr = (__arg0); \
+ size_t __size = (__arg2); \
+ \
+ if(__builtin_constant_p(__char) && !(__char)) \
+ __retval = __memscan_zero(__addr, __size); \
+ else \
+ __retval = __memscan_generic(__addr, (__char), __size); \
+ \
+ __retval; \
+})
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *,const void *,__kernel_size_t);
+
+/* Now the str*() stuff... */
+#define __HAVE_ARCH_STRLEN
+extern __kernel_size_t strlen(const char *);
+
+#define __HAVE_ARCH_STRNCMP
+
+extern int __strncmp(const char *, const char *, __kernel_size_t);
+
+static inline int __constant_strncmp(const char *src, const char *dest, __kernel_size_t count)
+{
+ register int retval;
+ switch(count) {
+ case 0: return 0;
+ case 1: return (src[0] - dest[0]);
+ case 2: retval = (src[0] - dest[0]);
+ if(!retval && src[0])
+ retval = (src[1] - dest[1]);
+ return retval;
+ case 3: retval = (src[0] - dest[0]);
+ if(!retval && src[0]) {
+ retval = (src[1] - dest[1]);
+ if(!retval && src[1])
+ retval = (src[2] - dest[2]);
+ }
+ return retval;
+ case 4: retval = (src[0] - dest[0]);
+ if(!retval && src[0]) {
+ retval = (src[1] - dest[1]);
+ if(!retval && src[1]) {
+ retval = (src[2] - dest[2]);
+ if (!retval && src[2])
+ retval = (src[3] - dest[3]);
+ }
+ }
+ return retval;
+ case 5: retval = (src[0] - dest[0]);
+ if(!retval && src[0]) {
+ retval = (src[1] - dest[1]);
+ if(!retval && src[1]) {
+ retval = (src[2] - dest[2]);
+ if (!retval && src[2]) {
+ retval = (src[3] - dest[3]);
+ if (!retval && src[3])
+ retval = (src[4] - dest[4]);
+ }
+ }
+ }
+ return retval;
+ default:
+ retval = (src[0] - dest[0]);
+ if(!retval && src[0]) {
+ retval = (src[1] - dest[1]);
+ if(!retval && src[1]) {
+ retval = (src[2] - dest[2]);
+ if(!retval && src[2])
+ retval = __strncmp(src+3,dest+3,count-3);
+ }
+ }
+ return retval;
+ }
+}
+
+#undef strncmp
+#define strncmp(__arg0, __arg1, __arg2) \
+(__builtin_constant_p(__arg2) ? \
+ __constant_strncmp(__arg0, __arg1, __arg2) : \
+ __strncmp(__arg0, __arg1, __arg2))
+
+#endif /* !EXPORT_SYMTAB_STROPS */
+
+#endif /* __KERNEL__ */
+
+#endif /* !(__SPARC_STRING_H__) */
diff --git a/include/asm-sparc/sun4paddr.h b/include/asm-sparc/sun4paddr.h
new file mode 100644
index 000000000000..d863bfd5f09a
--- /dev/null
+++ b/include/asm-sparc/sun4paddr.h
@@ -0,0 +1,56 @@
+/* $Id: sun4paddr.h,v 1.3 1998/07/28 16:53:27 jj Exp $
+ * sun4paddr.h: Various physical addresses on sun4 machines
+ *
+ * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
+ * Copyright (C) 1998 Chris Davis (cdavis@cois.on.ca)
+ *
+ * Now supports more sun4's
+ */
+
+#ifndef _SPARC_SUN4PADDR_H
+#define _SPARC_SUN4PADDR_H
+
+#define SUN4_IE_PHYSADDR 0xf5000000
+#define SUN4_UNUSED_PHYSADDR 0
+
+/* these work for me */
+#define SUN4_200_MEMREG_PHYSADDR 0xf4000000
+#define SUN4_200_CLOCK_PHYSADDR 0xf3000000
+#define SUN4_200_BWTWO_PHYSADDR 0xfd000000
+#define SUN4_200_ETH_PHYSADDR 0xf6000000
+#define SUN4_200_SI_PHYSADDR 0xff200000
+
+/* these were here before */
+#define SUN4_300_MEMREG_PHYSADDR 0xf4000000
+#define SUN4_300_CLOCK_PHYSADDR 0xf2000000
+#define SUN4_300_TIMER_PHYSADDR 0xef000000
+#define SUN4_300_ETH_PHYSADDR 0xf9000000
+#define SUN4_300_BWTWO_PHYSADDR 0xfb400000
+#define SUN4_300_DMA_PHYSADDR 0xfa001000
+#define SUN4_300_ESP_PHYSADDR 0xfa000000
+
+/* Are these right? */
+#define SUN4_400_MEMREG_PHYSADDR 0xf4000000
+#define SUN4_400_CLOCK_PHYSADDR 0xf2000000
+#define SUN4_400_TIMER_PHYSADDR 0xef000000
+#define SUN4_400_ETH_PHYSADDR 0xf9000000
+#define SUN4_400_BWTWO_PHYSADDR 0xfb400000
+#define SUN4_400_DMA_PHYSADDR 0xfa001000
+#define SUN4_400_ESP_PHYSADDR 0xfa000000
+
+/*
+ these are the actual values set and used in the code. Unused items set
+ to SUN_UNUSED_PHYSADDR
+ */
+
+extern int sun4_memreg_physaddr; /* memory register (ecc?) */
+extern int sun4_clock_physaddr; /* system clock */
+extern int sun4_timer_physaddr; /* timer, where applicable */
+extern int sun4_eth_physaddr; /* onboard ethernet (ie/le) */
+extern int sun4_si_physaddr; /* sun3 scsi adapter */
+extern int sun4_bwtwo_physaddr; /* onboard bw2 */
+extern int sun4_dma_physaddr; /* scsi dma */
+extern int sun4_esp_physaddr; /* esp scsi */
+extern int sun4_ie_physaddr; /* interrupt enable */
+
+#endif /* !(_SPARC_SUN4PADDR_H) */
diff --git a/include/asm-sparc/sun4prom.h b/include/asm-sparc/sun4prom.h
new file mode 100644
index 000000000000..9c8b4cbf629a
--- /dev/null
+++ b/include/asm-sparc/sun4prom.h
@@ -0,0 +1,83 @@
+/*
+ * sun4prom.h -- interface to sun4 PROM monitor. We don't use most of this,
+ * so most of these are just placeholders.
+ */
+
+#ifndef _SUN4PROM_H_
+#define _SUN4PROM_H_
+
+/*
+ * Although this looks similar to an romvec for a OpenProm machine, it is
+ * actually closer to what was used in the Sun2 and Sun3.
+ *
+ * V2 entries exist only in version 2 PROMs and later, V3 in version 3 and later.
+ *
+ * Many of the function prototypes are guesses. Some are certainly wrong.
+ * Use with care.
+ */
+
+typedef struct {
+ char *initSP; /* Initial system stack ptr */
+ void (*startmon)(void); /* Initial PC for hardware */
+ int *diagberr; /* Bus err handler for diags */
+ struct linux_arguments_v0 **bootParam; /* Info for bootstrapped pgm */
+ unsigned int *memorysize; /* Usable memory in bytes */
+ unsigned char (*getchar)(void); /* Get char from input device */
+ void (*putchar)(char); /* Put char to output device */
+ int (*mayget)(void); /* Maybe get char, or -1 */
+ int (*mayput)(int); /* Maybe put char, or -1 */
+ unsigned char *echo; /* Should getchar echo? */
+ unsigned char *insource; /* Input source selector */
+ unsigned char *outsink; /* Output sink selector */
+ int (*getkey)(void); /* Get next key if one exists */
+ void (*initgetkey)(void); /* Initialize get key */
+ unsigned int *translation; /* Kbd translation selector */
+ unsigned char *keybid; /* Keyboard ID byte */
+ int *screen_x; /* V2: Screen x pos (r/o) */
+ int *screen_y; /* V2: Screen y pos (r/o) */
+ struct keybuf *keybuf; /* Up/down keycode buffer */
+ char *monid; /* Monitor version ID */
+ void (*fbwritechar)(char); /* Write a character to FB */
+ int *fbAddr; /* Address of frame buffer */
+ char **font; /* Font table for FB */
+ void (*fbwritestr)(char *); /* Write string to FB */
+ void (*reboot)(char *); /* e.g. reboot("sd()vmlinux") */
+ unsigned char *linebuf; /* The line input buffer */
+ unsigned char **lineptr; /* Cur pointer into linebuf */
+ int *linesize; /* length of line in linebuf */
+ void (*getline)(char *); /* Get line from user */
+ unsigned char (*getnextchar)(void); /* Get next char from linebuf */
+ unsigned char (*peeknextchar)(void); /* Peek at next char */
+ int *fbthere; /* =1 if frame buffer there */
+ int (*getnum)(void); /* Grab hex num from line */
+ int (*printf)(char *, ...); /* See prom_printf() instead */
+ void (*printhex)(int); /* Format N digits in hex */
+ unsigned char *leds; /* RAM copy of LED register */
+ void (*setLEDs)(unsigned char *); /* Sets LED's and RAM copy */
+ void (*NMIaddr)(void *); /* Addr for level 7 vector */
+ void (*abortentry)(void); /* Entry for keyboard abort */
+ int *nmiclock; /* Counts up in msec */
+ int *FBtype; /* Frame buffer type */
+ unsigned int romvecversion; /* Version number for this romvec */
+ struct globram *globram; /* monitor global variables ??? */
+ void * kbdaddr; /* Addr of keyboard in use */
+ int *keyrinit; /* ms before kbd repeat */
+ unsigned char *keyrtick; /* ms between repetitions */
+ unsigned int *memoryavail; /* V1: Main mem usable size */
+ long *resetaddr; /* where to jump on a reset */
+ long *resetmap; /* pgmap entry for resetaddr */
+ void (*exittomon)(void); /* Exit from user program */
+ unsigned char **memorybitmap; /* V1: &{0 or &bits} */
+ void (*setcxsegmap)(int ctxt, char *va, int pmeg); /* Set seg in any context */
+ void (**vector_cmd)(void *); /* V2: Handler for 'v' cmd */
+ unsigned long *expectedtrapsig; /* V3: Location of the expected trap signal */
+ unsigned long *trapvectorbasetable; /* V3: Address of the trap vector table */
+ int unused1;
+ int unused2;
+ int unused3;
+ int unused4;
+} linux_sun4_romvec;
+
+extern linux_sun4_romvec *sun4_romvec;
+
+#endif /* _SUN4PROM_H_ */
diff --git a/include/asm-sparc/sunbpp.h b/include/asm-sparc/sunbpp.h
new file mode 100644
index 000000000000..568db79b730d
--- /dev/null
+++ b/include/asm-sparc/sunbpp.h
@@ -0,0 +1,80 @@
+/* $Id: sunbpp.h,v 1.1 1999/08/08 14:09:49 shadow Exp $
+ * include/asm-sparc/sunbpp.h
+ */
+
+#ifndef _ASM_SPARC_SUNBPP_H
+#define _ASM_SPARC_SUNBPP_H
+
+struct bpp_regs {
+ /* DMA registers */
+ __volatile__ __u32 p_csr; /* DMA Control/Status Register */
+ __volatile__ __u32 p_addr; /* Address Register */
+ __volatile__ __u32 p_bcnt; /* Byte Count Register */
+ __volatile__ __u32 p_tst_csr; /* Test Control/Status (DMA2 only) */
+ /* Parallel Port registers */
+ __volatile__ __u16 p_hcr; /* Hardware Configuration Register */
+ __volatile__ __u16 p_ocr; /* Operation Configuration Register */
+ __volatile__ __u8 p_dr; /* Parallel Data Register */
+ __volatile__ __u8 p_tcr; /* Transfer Control Register */
+ __volatile__ __u8 p_or; /* Output Register */
+ __volatile__ __u8 p_ir; /* Input Register */
+ __volatile__ __u16 p_icr; /* Interrupt Control Register */
+};
+
+/* P_HCR. Time is in increments of SBus clock. */
+#define P_HCR_TEST 0x8000 /* Allows buried counters to be read */
+#define P_HCR_DSW 0x7f00 /* Data strobe width (in ticks) */
+#define P_HCR_DDS 0x007f /* Data setup before strobe (in ticks) */
+
+/* P_OCR. */
+#define P_OCR_MEM_CLR 0x8000
+#define P_OCR_DATA_SRC 0x4000 /* ) */
+#define P_OCR_DS_DSEL 0x2000 /* ) Bidirectional */
+#define P_OCR_BUSY_DSEL 0x1000 /* ) selects */
+#define P_OCR_ACK_DSEL 0x0800 /* ) */
+#define P_OCR_EN_DIAG 0x0400
+#define P_OCR_BUSY_OP 0x0200 /* Busy operation */
+#define P_OCR_ACK_OP 0x0100 /* Ack operation */
+#define P_OCR_SRST 0x0080 /* Reset state machines. Not selfcleaning. */
+#define P_OCR_IDLE 0x0008 /* PP data transfer state machine is idle */
+#define P_OCR_V_ILCK 0x0002 /* Versatec faded. Zebra only. */
+#define P_OCR_EN_VER 0x0001 /* Enable Versatec (0 - enable). Zebra only. */
+
+/* P_TCR */
+#define P_TCR_DIR 0x08
+#define P_TCR_BUSY 0x04
+#define P_TCR_ACK 0x02
+#define P_TCR_DS 0x01 /* Strobe */
+
+/* P_OR */
+#define P_OR_V3 0x20 /* ) */
+#define P_OR_V2 0x10 /* ) on Zebra only */
+#define P_OR_V1 0x08 /* ) */
+#define P_OR_INIT 0x04
+#define P_OR_AFXN 0x02 /* Auto Feed */
+#define P_OR_SLCT_IN 0x01
+
+/* P_IR */
+#define P_IR_PE 0x04
+#define P_IR_SLCT 0x02
+#define P_IR_ERR 0x01
+
+/* P_ICR */
+#define P_DS_IRQ 0x8000 /* RW1 */
+#define P_ACK_IRQ 0x4000 /* RW1 */
+#define P_BUSY_IRQ 0x2000 /* RW1 */
+#define P_PE_IRQ 0x1000 /* RW1 */
+#define P_SLCT_IRQ 0x0800 /* RW1 */
+#define P_ERR_IRQ 0x0400 /* RW1 */
+#define P_DS_IRQ_EN 0x0200 /* RW Always on rising edge */
+#define P_ACK_IRQ_EN 0x0100 /* RW Always on rising edge */
+#define P_BUSY_IRP 0x0080 /* RW 1= rising edge */
+#define P_BUSY_IRQ_EN 0x0040 /* RW */
+#define P_PE_IRP 0x0020 /* RW 1= rising edge */
+#define P_PE_IRQ_EN 0x0010 /* RW */
+#define P_SLCT_IRP 0x0008 /* RW 1= rising edge */
+#define P_SLCT_IRQ_EN 0x0004 /* RW */
+#define P_ERR_IRP 0x0002 /* RW1 1= rising edge */
+#define P_ERR_IRQ_EN 0x0001 /* RW */
+
+#endif /* !(_ASM_SPARC_SUNBPP_H) */
diff --git a/include/asm-sparc/svr4.h b/include/asm-sparc/svr4.h
new file mode 100644
index 000000000000..da1f1c980e2d
--- /dev/null
+++ b/include/asm-sparc/svr4.h
@@ -0,0 +1,119 @@
+/* Solaris/SPARC constants and definitions --
+ * (C) 1996 Miguel de Icaza
+ *
+ * This file is not meant to be included by user level applications
+ * but the solaris syscall emulator
+ */
+
+#ifndef _SPARC_SVR4_H
+#define _SPARC_SVR4_H
+
+/* Signals as used by svr4 */
+typedef struct { /* signal set type */
+ ulong sigbits[4];
+} svr4_sigset_t;
+
+/* Values for siginfo.code */
+#define SVR4_SINOINFO 32767
+/* Siginfo, sucker expects bunch of information on those parameters */
+typedef union {
+ char total_size [128];
+ struct {
+ int signo;
+ int code;
+ int error;
+ union {
+ } data;
+ } siginfo;
+} svr4_siginfo_t;
+
+/* Context definition */
+
+/* Location of the user stored registers into a greg_t */
+enum {
+ SVR4_PSR, SVR4_PC, SVR4_NPC, SVR4_Y,
+ SVR4_G1, SVR4_G2, SVR4_G3, SVR4_G4,
+ SVR4_G5, SVR4_G6, SVR4_G7, SVR4_O0,
+ SVR4_O1, SVR4_O2, SVR4_O3, SVR4_O4,
+ SVR4_O5, SVR4_O6, SVR4_O7
+};
+
+/* sizeof (regs) / sizeof (greg_t), defined in the ABI */
+#define SVR4_NREGS 19
+#define SVR4_MAXWIN 31
+
+typedef struct {
+ uint rwin_lo[8];
+ uint rwin_in[8];
+} svr4_rwindow_t;
+
+typedef struct {
+ int count;
+ int __user *winptr [SVR4_MAXWIN]; /* pointer to the windows */
+ svr4_rwindow_t win[SVR4_MAXWIN]; /* the windows */
+} svr4_gwindows_t;
+
+typedef int svr4_gregset_t[SVR4_NREGS];
+
+typedef struct {
+ double fpu_regs[32];
+ void *fp_q;
+ unsigned fp_fsr;
+ u_char fp_nqel;
+ u_char fp_nqsize;
+ u_char inuse; /* if fpu is in use */
+} svr4_fregset_t;
+
+typedef struct {
+ uint id; /* if this holds "xrs" string => ptr is valid */
+ caddr_t ptr;
+} svr4_xrs_t;
+
+/* Machine dependent context */
+typedef struct {
+ svr4_gregset_t greg; /* registers 0..19 (see top) */
+ svr4_gwindows_t __user *gwin; /* may point to register windows */
+ svr4_fregset_t freg; /* floating point registers */
+ svr4_xrs_t xrs; /* mhm? */
+ long pad[19];
+} svr4_mcontext_t;
+
+/* flags for stack_t.flags */
+enum svr4_stack_flags {
+ SVR4_SS_ONSTACK,
+ SVR4_SS_DISABLE,
+};
+
+/* signal stack exection place, unsupported */
+typedef struct svr4_stack_t {
+ char __user *sp;
+ int size;
+ int flags;
+} svr4_stack_t;
+
+/* Context used by getcontext and setcontext */
+typedef struct svr4_ucontext_t {
+ u_long flags; /* context flags, indicate what is loaded */
+ struct svr4_ucontext *link;
+ svr4_sigset_t sigmask;
+ svr4_stack_t stack;
+ svr4_mcontext_t mcontext;
+ long pad[23];
+} svr4_ucontext_t;
+
+/* windows hold the windows as they were at signal time,
+ * ucontext->mcontext holds a pointer to them.
+ * addresses for uc and si are passed as parameters to svr4 signal
+ * handler
+ */
+
+/* This is the signal frame that is passed to the signal handler */
+typedef struct {
+ svr4_gwindows_t gw; /* windows */
+ svr4_ucontext_t uc; /* machine context */
+ svr4_siginfo_t si; /* siginfo */
+} svr4_signal_frame_t;
+
+#define SVR4_SF_ALIGNED (((sizeof (svr4_signal_frame_t) + 7) & (~7)))
+
+#endif /* include control */
diff --git a/include/asm-sparc/swift.h b/include/asm-sparc/swift.h
new file mode 100644
index 000000000000..e535061bf755
--- /dev/null
+++ b/include/asm-sparc/swift.h
@@ -0,0 +1,106 @@
+/* swift.h: Specific definitions for the _broken_ Swift SRMMU
+ * MMU module.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SWIFT_H
+#define _SPARC_SWIFT_H
+
+/* Swift is so brain damaged, here is the mmu control register. */
+#define SWIFT_ST 0x00800000 /* SW tablewalk enable */
+#define SWIFT_WP 0x00400000 /* Watchpoint enable */
+
+/* Branch folding (buggy, disable on production systems!) */
+#define SWIFT_BF 0x00200000
+#define SWIFT_PMC 0x00180000 /* Page mode control */
+#define SWIFT_PE 0x00040000 /* Parity enable */
+#define SWIFT_PC 0x00020000 /* Parity control */
+#define SWIFT_AP 0x00010000 /* Graphics page mode control (TCX/SX) */
+#define SWIFT_AC 0x00008000 /* Alternate Cacheability (see viking.h) */
+#define SWIFT_BM 0x00004000 /* Boot mode */
+#define SWIFT_RC 0x00003c00 /* DRAM refresh control */
+#define SWIFT_IE 0x00000200 /* Instruction cache enable */
+#define SWIFT_DE 0x00000100 /* Data cache enable */
+#define SWIFT_SA 0x00000080 /* Store Allocate */
+#define SWIFT_NF 0x00000002 /* No fault mode */
+#define SWIFT_EN 0x00000001 /* MMU enable */
+
+/* Bits [13:5] select one of 512 instruction cache tags */
+static inline void swift_inv_insn_tag(unsigned long addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" (addr), "i" (ASI_M_TXTC_TAG)
+ : "memory");
+}
+
+/* Bits [12:4] select one of 512 data cache tags */
+static inline void swift_inv_data_tag(unsigned long addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" (addr), "i" (ASI_M_DATAC_TAG)
+ : "memory");
+}
+
+static inline void swift_flush_dcache(void)
+{
+ unsigned long addr;
+
+ for (addr = 0; addr < 0x2000; addr += 0x10)
+ swift_inv_data_tag(addr);
+}
+
+static inline void swift_flush_icache(void)
+{
+ unsigned long addr;
+
+ for (addr = 0; addr < 0x4000; addr += 0x20)
+ swift_inv_insn_tag(addr);
+}
+
+static inline void swift_idflash_clear(void)
+{
+ unsigned long addr;
+
+ for (addr = 0; addr < 0x2000; addr += 0x10) {
+ swift_inv_insn_tag(addr<<1);
+ swift_inv_data_tag(addr);
+ }
+}
+
+/* Swift is so broken, it isn't even safe to use the following. */
+static inline void swift_flush_page(unsigned long page)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" (page), "i" (ASI_M_FLUSH_PAGE)
+ : "memory");
+}
+
+static inline void swift_flush_segment(unsigned long addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" (addr), "i" (ASI_M_FLUSH_SEG)
+ : "memory");
+}
+
+static inline void swift_flush_region(unsigned long addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" (addr), "i" (ASI_M_FLUSH_REGION)
+ : "memory");
+}
+
+static inline void swift_flush_context(void)
+{
+ __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+ : /* no outputs */
+ : "i" (ASI_M_FLUSH_CTX)
+ : "memory");
+}
+
+#endif /* !(_SPARC_SWIFT_H) */
diff --git a/include/asm-sparc/sysen.h b/include/asm-sparc/sysen.h
new file mode 100644
index 000000000000..692fa6f2296a
--- /dev/null
+++ b/include/asm-sparc/sysen.h
@@ -0,0 +1,15 @@
+/* $Id: sysen.h,v 1.3 1995/11/25 02:32:58 davem Exp $
+ * sysen.h: Bit fields within the "System Enable" register accessed via
+ * the ASI_CONTROL address space at address AC_SYSENABLE.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SYSEN_H
+#define _SPARC_SYSEN_H
+
+#define SENABLE_DVMA 0x20 /* enable dvma transfers */
+#define SENABLE_CACHE 0x10 /* enable VAC cache */
+#define SENABLE_RESET 0x04 /* reset whole machine, danger Will Robinson */
+
+#endif /* _SPARC_SYSEN_H */
diff --git a/include/asm-sparc/system.h b/include/asm-sparc/system.h
new file mode 100644
index 000000000000..80cf20cfaee1
--- /dev/null
+++ b/include/asm-sparc/system.h
@@ -0,0 +1,262 @@
+/* $Id: system.h,v 1.86 2001/10/30 04:57:10 davem Exp $ */
+#include <linux/config.h>
+
+#ifndef __SPARC_SYSTEM_H
+#define __SPARC_SYSTEM_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/threads.h> /* NR_CPUS */
+#include <linux/thread_info.h>
+
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Sparc (general) CPU types
+ */
+enum sparc_cpu {
+ sun4 = 0x00,
+ sun4c = 0x01,
+ sun4m = 0x02,
+ sun4d = 0x03,
+ sun4e = 0x04,
+ sun4u = 0x05, /* V8 ploos ploos */
+ sun_unknown = 0x06,
+ ap1000 = 0x07, /* almost a sun4m */
+};
+
+/* Really, userland should not be looking at any of this... */
+#ifdef __KERNEL__
+
+extern enum sparc_cpu sparc_cpu_model;
+
+#ifndef CONFIG_SUN4
+#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c)
+#define ARCH_SUN4 0
+#else
+#define ARCH_SUN4C_SUN4 1
+#define ARCH_SUN4 1
+#endif
+
+#define SUN4M_NCPUS 4 /* Architectural limit of sun4m. */
+
+extern struct thread_info *current_set[NR_CPUS];
+
+extern unsigned long empty_bad_page;
+extern unsigned long empty_bad_page_table;
+extern unsigned long empty_zero_page;
+
+extern void sun_do_break(void);
+extern int serial_console;
+extern int stop_a_enabled;
+
+static __inline__ int con_is_present(void)
+{
+ return serial_console ? 0 : 1;
+}
+
+/* When a context switch happens we must flush all user windows so that
+ * the windows of the current process are flushed onto its stack. This
+ * way the windows are all clean for the next process and the stack
+ * frames are up to date.
+ */
+extern void flush_user_windows(void);
+extern void kill_user_windows(void);
+extern void synchronize_user_stack(void);
+extern void fpsave(unsigned long *fpregs, unsigned long *fsr,
+ void *fpqueue, unsigned long *fpqdepth);
+
+#ifdef CONFIG_SMP
+#define SWITCH_ENTER(prv) \
+ do { \
+ if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \
+ put_psr(get_psr() | PSR_EF); \
+ fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \
+ &(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \
+ clear_tsk_thread_flag(prv, TIF_USEDFPU); \
+ (prv)->thread.kregs->psr &= ~PSR_EF; \
+ } \
+ } while(0)
+
+#define SWITCH_DO_LAZY_FPU(next) /* */
+#else
+#define SWITCH_ENTER(prv) /* */
+#define SWITCH_DO_LAZY_FPU(nxt) \
+ do { \
+ if (last_task_used_math != (nxt)) \
+ (nxt)->thread.kregs->psr&=~PSR_EF; \
+ } while(0)
+#endif
+
+/*
+ * Flush windows so that the VM switch which follows
+ * would not pull the stack from under us.
+ *
+ * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work)
+ * XXX WTF is the above comment? Found in late teen 2.4.x.
+ */
+#define prepare_arch_switch(rq, next) do { \
+ __asm__ __volatile__( \
+ ".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \
+ "save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
+ "save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
+ "save %sp, -0x40, %sp\n\t" \
+ "restore; restore; restore; restore; restore; restore; restore"); \
+} while(0)
+#define finish_arch_switch(rq, next) spin_unlock_irq(&(rq)->lock)
+#define task_running(rq, p) ((rq)->curr == (p))
+
+ /* Much care has gone into this code, do not touch it.
+ *
+ * We need to loadup regs l0/l1 for the newly forked child
+ * case because the trap return path relies on those registers
+ * holding certain values, gcc is told that they are clobbered.
+ * Gcc needs registers for 3 values in and 1 value out, so we
+ * clobber every non-fixed-usage register besides l2/l3/o4/o5. -DaveM
+ *
+ * Hey Dave, that do not touch sign is too much of an incentive
+ * - Anton & Pete
+ */
+#define switch_to(prev, next, last) do { \
+ SWITCH_ENTER(prev); \
+ SWITCH_DO_LAZY_FPU(next); \
+ cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask); \
+ __asm__ __volatile__( \
+ "sethi %%hi(here - 0x8), %%o7\n\t" \
+ "mov %%g6, %%g3\n\t" \
+ "or %%o7, %%lo(here - 0x8), %%o7\n\t" \
+ "rd %%psr, %%g4\n\t" \
+ "std %%sp, [%%g6 + %4]\n\t" \
+ "rd %%wim, %%g5\n\t" \
+ "wr %%g4, 0x20, %%psr\n\t" \
+ "nop\n\t" \
+ "std %%g4, [%%g6 + %3]\n\t" \
+ "ldd [%2 + %3], %%g4\n\t" \
+ "mov %2, %%g6\n\t" \
+ ".globl patchme_store_new_current\n" \
+"patchme_store_new_current:\n\t" \
+ "st %2, [%1]\n\t" \
+ "wr %%g4, 0x20, %%psr\n\t" \
+ "nop\n\t" \
+ "nop\n\t" \
+ "nop\n\t" /* LEON needs all 3 nops: load to %sp depends on CWP. */ \
+ "ldd [%%g6 + %4], %%sp\n\t" \
+ "wr %%g5, 0x0, %%wim\n\t" \
+ "ldd [%%sp + 0x00], %%l0\n\t" \
+ "ldd [%%sp + 0x38], %%i6\n\t" \
+ "wr %%g4, 0x0, %%psr\n\t" \
+ "nop\n\t" \
+ "nop\n\t" \
+ "jmpl %%o7 + 0x8, %%g0\n\t" \
+ " ld [%%g3 + %5], %0\n\t" \
+ "here:\n" \
+ : "=&r" (last) \
+ : "r" (&(current_set[hard_smp_processor_id()])), \
+ "r" ((next)->thread_info), \
+ "i" (TI_KPSR), \
+ "i" (TI_KSP), \
+ "i" (TI_TASK) \
+ : "g1", "g2", "g3", "g4", "g5", "g7", \
+ "l0", "l1", "l3", "l4", "l5", "l6", "l7", \
+ "i0", "i1", "i2", "i3", "i4", "i5", \
+ "o0", "o1", "o2", "o3", "o7"); \
+ } while(0)
+
+/*
+ * Changing the IRQ level on the Sparc.
+ */
+extern void local_irq_restore(unsigned long);
+extern unsigned long __local_irq_save(void);
+extern void local_irq_enable(void);
+
+static inline unsigned long getipl(void)
+{
+ unsigned long retval;
+
+ __asm__ __volatile__("rd %%psr, %0" : "=r" (retval));
+ return retval;
+}
+
+#define local_save_flags(flags) ((flags) = getipl())
+#define local_irq_save(flags) ((flags) = __local_irq_save())
+#define local_irq_disable() ((void) __local_irq_save())
+#define irqs_disabled() ((getipl() & PSR_PIL) != 0)
+
+/* XXX Change this if we ever use a PSO mode kernel. */
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+#define rmb() mb()
+#define wmb() mb()
+#define read_barrier_depends() do { } while(0)
+#define set_mb(__var, __value) do { __var = __value; mb(); } while(0)
+#define set_wmb(__var, __value) set_mb(__var, __value)
+#define smp_mb() __asm__ __volatile__("":::"memory")
+#define smp_rmb() __asm__ __volatile__("":::"memory")
+#define smp_wmb() __asm__ __volatile__("":::"memory")
+#define smp_read_barrier_depends() do { } while(0)
+
+#define nop() __asm__ __volatile__ ("nop")
+
+/* This has special calling conventions */
+#ifndef CONFIG_SMP
+BTFIXUPDEF_CALL(void, ___xchg32, void)
+#endif
+
+extern __inline__ unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val)
+{
+#ifdef CONFIG_SMP
+ __asm__ __volatile__("swap [%2], %0"
+ : "=&r" (val)
+ : "0" (val), "r" (m)
+ : "memory");
+ return val;
+#else
+ register unsigned long *ptr asm("g1");
+ register unsigned long ret asm("g2");
+
+ ptr = (unsigned long *) m;
+ ret = val;
+
+ /* Note: this is magic and the nop there is
+ really needed. */
+ __asm__ __volatile__(
+ "mov %%o7, %%g4\n\t"
+ "call ___f____xchg32\n\t"
+ " nop\n\t"
+ : "=&r" (ret)
+ : "0" (ret), "r" (ptr)
+ : "g3", "g4", "g7", "memory", "cc");
+
+ return ret;
+#endif
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define tas(ptr) (xchg((ptr),1))
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static __inline__ unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
+{
+ switch (size) {
+ case 4:
+ return xchg_u32(ptr, x);
+ };
+ __xchg_called_with_bad_pointer();
+ return x;
+}
+
+extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* !(__SPARC_SYSTEM_H) */
diff --git a/include/asm-sparc/termbits.h b/include/asm-sparc/termbits.h
new file mode 100644
index 000000000000..1794d71134b7
--- /dev/null
+++ b/include/asm-sparc/termbits.h
@@ -0,0 +1,234 @@
+#ifndef _SPARC_TERMBITS_H
+#define _SPARC_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned long tcflag_t;
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+#define NCCS 17
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+#ifdef __KERNEL__
+#define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t))
+ cc_t _x_cc[2]; /* We need them to hold vmin/vtime */
+#endif
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VEOL 5
+#define VEOL2 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+
+
+
+#define VSUSP 10
+#define VDSUSP 11 /* SunOS POSIX nicety I do believe... */
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+
+/* Kernel keeps vmin/vtime separated, user apps assume vmin/vtime is
+ * shared with eof/eol
+ */
+#ifdef __KERNEL__
+#define VMIN 16
+#define VTIME 17
+#else
+#define VMIN VEOF
+#define VTIME VEOL
+#endif
+
+/* c_iflag bits */
+#define IGNBRK 0x00000001
+#define BRKINT 0x00000002
+#define IGNPAR 0x00000004
+#define PARMRK 0x00000008
+#define INPCK 0x00000010
+#define ISTRIP 0x00000020
+#define INLCR 0x00000040
+#define IGNCR 0x00000080
+#define ICRNL 0x00000100
+#define IUCLC 0x00000200
+#define IXON 0x00000400
+#define IXANY 0x00000800
+#define IXOFF 0x00001000
+#define IMAXBEL 0x00002000
+#define IUTF8 0x00004000
+
+/* c_oflag bits */
+#define OPOST 0x00000001
+#define OLCUC 0x00000002
+#define ONLCR 0x00000004
+#define OCRNL 0x00000008
+#define ONOCR 0x00000010
+#define ONLRET 0x00000020
+#define OFILL 0x00000040
+#define OFDEL 0x00000080
+#define NLDLY 0x00000100
+#define NL0 0x00000000
+#define NL1 0x00000100
+#define CRDLY 0x00000600
+#define CR0 0x00000000
+#define CR1 0x00000200
+#define CR2 0x00000400
+#define CR3 0x00000600
+#define TABDLY 0x00001800
+#define TAB0 0x00000000
+#define TAB1 0x00000800
+#define TAB2 0x00001000
+#define TAB3 0x00001800
+#define XTABS 0x00001800
+#define BSDLY 0x00002000
+#define BS0 0x00000000
+#define BS1 0x00002000
+#define VTDLY 0x00004000
+#define VT0 0x00000000
+#define VT1 0x00004000
+#define FFDLY 0x00008000
+#define FF0 0x00000000
+#define FF1 0x00008000
+#define PAGEOUT 0x00010000 /* SUNOS specific */
+#define WRAP 0x00020000 /* SUNOS specific */
+
+/* c_cflag bit meaning */
+#define CBAUD 0x0000100f
+#define B0 0x00000000 /* hang up */
+#define B50 0x00000001
+#define B75 0x00000002
+#define B110 0x00000003
+#define B134 0x00000004
+#define B150 0x00000005
+#define B200 0x00000006
+#define B300 0x00000007
+#define B600 0x00000008
+#define B1200 0x00000009
+#define B1800 0x0000000a
+#define B2400 0x0000000b
+#define B4800 0x0000000c
+#define B9600 0x0000000d
+#define B19200 0x0000000e
+#define B38400 0x0000000f
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0x00000030
+#define CS5 0x00000000
+#define CS6 0x00000010
+#define CS7 0x00000020
+#define CS8 0x00000030
+#define CSTOPB 0x00000040
+#define CREAD 0x00000080
+#define PARENB 0x00000100
+#define PARODD 0x00000200
+#define HUPCL 0x00000400
+#define CLOCAL 0x00000800
+#define CBAUDEX 0x00001000
+/* We'll never see these speeds with the Zilogs, but for completeness... */
+#define B57600 0x00001001
+#define B115200 0x00001002
+#define B230400 0x00001003
+#define B460800 0x00001004
+/* This is what we can do with the Zilogs. */
+#define B76800 0x00001005
+/* This is what we can do with the SAB82532. */
+#define B153600 0x00001006
+#define B307200 0x00001007
+#define B614400 0x00001008
+#define B921600 0x00001009
+/* And these are the rest... */
+#define B500000 0x0000100a
+#define B576000 0x0000100b
+#define B1000000 0x0000100c
+#define B1152000 0x0000100d
+#define B1500000 0x0000100e
+#define B2000000 0x0000100f
+/* These have totally bogus values and nobody uses them
+ so far. Later on we'd have to use say 0x10000x and
+ adjust CBAUD constant and drivers accordingly.
+#define B2500000 0x00001010
+#define B3000000 0x00001011
+#define B3500000 0x00001012
+#define B4000000 0x00001013 */
+#define CIBAUD 0x100f0000 /* input baud rate (not used) */
+#define CMSPAR 0x40000000 /* mark or space (stick) parity */
+#define CRTSCTS 0x80000000 /* flow control */
+
+/* c_lflag bits */
+#define ISIG 0x00000001
+#define ICANON 0x00000002
+#define XCASE 0x00000004
+#define ECHO 0x00000008
+#define ECHOE 0x00000010
+#define ECHOK 0x00000020
+#define ECHONL 0x00000040
+#define NOFLSH 0x00000080
+#define TOSTOP 0x00000100
+#define ECHOCTL 0x00000200
+#define ECHOPRT 0x00000400
+#define ECHOKE 0x00000800
+#define DEFECHO 0x00001000 /* SUNOS thing, what is it? */
+#define FLUSHO 0x00002000
+#define PENDIN 0x00004000
+#define IEXTEN 0x00008000
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* !(_SPARC_TERMBITS_H) */
diff --git a/include/asm-sparc/termios.h b/include/asm-sparc/termios.h
new file mode 100644
index 000000000000..0a8ad4cac125
--- /dev/null
+++ b/include/asm-sparc/termios.h
@@ -0,0 +1,174 @@
+/* $Id: termios.h,v 1.32 2001/06/01 08:12:11 davem Exp $ */
+#ifndef _SPARC_TERMIOS_H
+#define _SPARC_TERMIOS_H
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+#if defined(__KERNEL__) || defined(__DEFINE_BSD_TERMIOS)
+struct sgttyb {
+ char sg_ispeed;
+ char sg_ospeed;
+ char sg_erase;
+ char sg_kill;
+ short sg_flags;
+};
+
+struct tchars {
+ char t_intrc;
+ char t_quitc;
+ char t_startc;
+ char t_stopc;
+ char t_eofc;
+ char t_brkc;
+};
+
+struct ltchars {
+ char t_suspc;
+ char t_dsuspc;
+ char t_rprntc;
+ char t_flushc;
+ char t_werasc;
+ char t_lnextc;
+};
+#endif /* __KERNEL__ */
+
+struct sunos_ttysize {
+ int st_lines; /* Lines on the terminal */
+ int st_columns; /* Columns on the terminal */
+};
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+/* line disciplines */
+#define N_TTY 0
+#define N_SLIP 1
+#define N_MOUSE 2
+#define N_PPP 3
+#define N_STRIP 4
+#define N_AX25 5
+#define N_X25 6
+#define N_6PACK 7
+#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964 9 /* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC 13 /* synchronous HDLC */
+#define N_SYNC_PPP 14 /* synchronous PPP */
+#define N_HCI 15 /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+
+/*
+ * c_cc characters in the termio structure. Oh, how I love being
+ * backwardly compatible. Notice that character 4 and 5 are
+ * interpreted differently depending on whether ICANON is set in
+ * c_lflag. If it's set, they are used as _VEOF and _VEOL, otherwise
+ * as _VMIN and V_TIME. This is for compatibility with OSF/1 (which
+ * is compatible with sysV)...
+ */
+#define _VMIN 4
+#define _VTIME 5
+
+
+/* intr=^C quit=^\ erase=del kill=^U
+ eof=^D eol=\0 eol2=\0 sxtc=\0
+ start=^Q stop=^S susp=^Z dsusp=^Y
+ reprint=^R discard=^U werase=^W lnext=^V
+ vmin=\1 vtime=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\000\000\000\021\023\032\031\022\025\027\026\001"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+ unsigned short tmp; \
+ get_user(tmp, &(termio)->c_iflag); \
+ (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+ get_user(tmp, &(termio)->c_oflag); \
+ (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+ get_user(tmp, &(termio)->c_cflag); \
+ (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+ get_user(tmp, &(termio)->c_lflag); \
+ (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+ 0; \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ *
+ * Note the "fun" _VMIN overloading.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
+ put_user((termios)->c_line, &(termio)->c_line); \
+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+ if (!((termios)->c_lflag & ICANON)) { \
+ put_user((termios)->c_cc[VMIN], &(termio)->c_cc[_VMIN]); \
+ put_user((termios)->c_cc[VTIME], &(termio)->c_cc[_VTIME]); \
+ } \
+ 0; \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+({ \
+ get_user((k)->c_iflag, &(u)->c_iflag); \
+ get_user((k)->c_oflag, &(u)->c_oflag); \
+ get_user((k)->c_cflag, &(u)->c_cflag); \
+ get_user((k)->c_lflag, &(u)->c_lflag); \
+ get_user((k)->c_line, &(u)->c_line); \
+ copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
+ if((k)->c_lflag & ICANON) { \
+ get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+ get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+ } else { \
+ get_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \
+ get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+ } \
+ 0; \
+})
+
+#define kernel_termios_to_user_termios(u, k) \
+({ \
+ put_user((k)->c_iflag, &(u)->c_iflag); \
+ put_user((k)->c_oflag, &(u)->c_oflag); \
+ put_user((k)->c_cflag, &(u)->c_cflag); \
+ put_user((k)->c_lflag, &(u)->c_lflag); \
+ put_user((k)->c_line, &(u)->c_line); \
+ copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
+ if(!((k)->c_lflag & ICANON)) { \
+ put_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \
+ put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+ } else { \
+ put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+ put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+ } \
+ 0; \
+})
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC_TERMIOS_H */
diff --git a/include/asm-sparc/thread_info.h b/include/asm-sparc/thread_info.h
new file mode 100644
index 000000000000..104f03c55416
--- /dev/null
+++ b/include/asm-sparc/thread_info.h
@@ -0,0 +1,153 @@
+/*
+ * thread_info.h: sparc low-level thread information
+ * adapted from the ppc version by Pete Zaitcev, which was
+ * adapted from the i386 version by Paul Mackerras
+ *
+ * Copyright (C) 2002 David Howells (dhowells@redhat.com)
+ * Copyright (c) 2002 Pete Zaitcev (zaitcev@yahoo.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#include <asm/btfixup.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Low level task data.
+ *
+ * If you change this, change the TI_* offsets below to match.
+ */
+#define NSWINS 8
+struct thread_info {
+ unsigned long uwinmask;
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+
+ int cpu; /* cpu we're on */
+ int preempt_count;
+ int softirq_count;
+ int hardirq_count;
+
+ /* Context switch saved kernel state. */
+ unsigned long ksp; /* ... ksp __attribute__ ((aligned (8))); */
+ unsigned long kpc;
+ unsigned long kpsr;
+ unsigned long kwim;
+
+ /* A place to store user windows and stack pointers
+ * when the stack needs inspection.
+ */
+ struct reg_window reg_window[NSWINS]; /* align for ldd! */
+ unsigned long rwbuf_stkptrs[NSWINS];
+ unsigned long w_saved;
+
+ struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .uwinmask = 0, \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = 1, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("g6");
+#define current_thread_info() (current_thread_info_reg)
+
+/*
+ * thread information allocation
+ */
+#if PAGE_SHIFT == 13
+#define THREAD_INFO_ORDER 0
+#else /* PAGE_SHIFT */
+#define THREAD_INFO_ORDER 1
+#endif
+
+BTFIXUPDEF_CALL(struct thread_info *, alloc_thread_info, void)
+#define alloc_thread_info(tsk) BTFIXUP_CALL(alloc_thread_info)()
+
+BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
+#define free_thread_info(ti) BTFIXUP_CALL(free_thread_info)(ti)
+
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Size of kernel stack for each process.
+ * Observe the order of get_free_pages() in alloc_thread_info().
+ * The sun4 has 8K stack too, because it's short on memory, and 16K is a waste.
+ */
+#define THREAD_SIZE 8192
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ * The "#define REGWIN_SZ 0x40" was abolished, so no multiplications.
+ */
+#define TI_UWINMASK 0x00 /* uwinmask */
+#define TI_TASK 0x04
+#define TI_EXECDOMAIN 0x08 /* exec_domain */
+#define TI_FLAGS 0x0c
+#define TI_CPU 0x10
+#define TI_PREEMPT 0x14 /* preempt_count */
+#define TI_SOFTIRQ 0x18 /* softirq_count */
+#define TI_HARDIRQ 0x1c /* hardirq_count */
+#define TI_KSP 0x20 /* ksp */
+#define TI_KPC 0x24 /* kpc (ldd'ed with kpc) */
+#define TI_KPSR 0x28 /* kpsr */
+#define TI_KWIM 0x2c /* kwim (ldd'ed with kpsr) */
+#define TI_REG_WINDOW 0x30
+#define TI_RWIN_SPTRS 0x230
+#define TI_W_SAVED 0x250
+/* #define TI_RESTART_BLOCK 0x25n */ /* Nobody cares */
+
+#define PREEMPT_ACTIVE 0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
+#define TIF_SIGPENDING 2 /* signal pending */
+#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+#define TIF_USEDFPU 8 /* FPU was used by this task
+ * this quantum (SMP) */
+#define TIF_POLLING_NRFLAG 9 /* true if poll_idle() is polling
+ * TIF_NEED_RESCHED */
+#define TIF_MEMDIE 10
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_USEDFPU (1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-sparc/timer.h b/include/asm-sparc/timer.h
new file mode 100644
index 000000000000..b16eb739dddb
--- /dev/null
+++ b/include/asm-sparc/timer.h
@@ -0,0 +1,110 @@
+/* $Id: timer.h,v 1.21 1999/04/20 13:22:51 anton Exp $
+ * timer.h: Definitions for the timer chips on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <linux/config.h>
+
+#ifndef _SPARC_TIMER_H
+#define _SPARC_TIMER_H
+
+#include <asm/system.h> /* For SUN4M_NCPUS */
+#include <asm/sun4paddr.h>
+#include <asm/btfixup.h>
+
+/* Timer structures. The interrupt timer has two properties which
+ * are the counter (which is handled in do_timer in sched.c) and the limit.
+ * This limit is where the timer's counter 'wraps' around. Oddly enough,
+ * the sun4c timer when it hits the limit wraps back to 1 and not zero
+ * thus when calculating the value at which it will fire a microsecond you
+ * must adjust by one. Thanks SUN for designing such great hardware ;(
+ */
+
+/* Note that I am only going to use the timer that interrupts at
+ * Sparc IRQ 10. There is another one available that can fire at
+ * IRQ 14. Currently it is left untouched, we keep the PROM's limit
+ * register value and let the prom take these interrupts. This allows
+ * L1-A to work.
+ */
+
+struct sun4c_timer_info {
+ __volatile__ unsigned int cur_count10;
+ __volatile__ unsigned int timer_limit10;
+ __volatile__ unsigned int cur_count14;
+ __volatile__ unsigned int timer_limit14;
+};
+
+#define SUN4C_TIMER_PHYSADDR 0xf3000000
+#ifdef CONFIG_SUN4
+#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR
+#else
+#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR
+#endif
+
+/* A sun4m has two blocks of registers which are probably of the same
+ * structure. LSI Logic's L64851 is told to _decrement_ from the limit
+ * value. Aurora behaves similarly but its limit value is compacted in
+ * other fashion (it's wider). Documented fields are defined here.
+ */
+
+/* As with the interrupt register, we have two classes of timer registers
+ * which are per-cpu and master. Per-cpu timers only hit that cpu and are
+ * only level 14 ticks, master timer hits all cpus and is level 10.
+ */
+
+#define SUN4M_PRM_CNT_L 0x80000000
+#define SUN4M_PRM_CNT_LVALUE 0x7FFFFC00
+
+struct sun4m_timer_percpu_info {
+ __volatile__ unsigned int l14_timer_limit; /* Initial value is 0x009c4000 */
+ __volatile__ unsigned int l14_cur_count;
+
+ /* This register appears to be write only and/or inaccessible
+ * on Uni-Processor sun4m machines.
+ */
+ __volatile__ unsigned int l14_limit_noclear; /* Data access error is here */
+
+ __volatile__ unsigned int cntrl; /* =1 after POST on Aurora */
+ __volatile__ unsigned char space[PAGE_SIZE - 16];
+};
+
+struct sun4m_timer_regs {
+ struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS];
+ volatile unsigned int l10_timer_limit;
+ volatile unsigned int l10_cur_count;
+
+ /* Again, this appears to be write only and/or inaccessible
+ * on uni-processor sun4m machines.
+ */
+ volatile unsigned int l10_limit_noclear;
+
+ /* This register too, it must be magic. */
+ volatile unsigned int foobar;
+
+ volatile unsigned int cfg; /* equals zero at boot time... */
+};
+
+extern struct sun4m_timer_regs *sun4m_timers;
+
+#define SUN4D_PRM_CNT_L 0x80000000
+#define SUN4D_PRM_CNT_LVALUE 0x7FFFFC00
+
+struct sun4d_timer_regs {
+ volatile unsigned int l10_timer_limit;
+ volatile unsigned int l10_cur_countx;
+ volatile unsigned int l10_limit_noclear;
+ volatile unsigned int ctrl;
+ volatile unsigned int l10_cur_count;
+};
+
+extern struct sun4d_timer_regs *sun4d_timers;
+
+extern __volatile__ unsigned int *master_l10_counter;
+extern __volatile__ unsigned int *master_l10_limit;
+
+/* FIXME: Make do_[gs]ettimeofday btfixup calls */
+BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv)
+#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv)
+
+#endif /* !(_SPARC_TIMER_H) */
diff --git a/include/asm-sparc/timex.h b/include/asm-sparc/timex.h
new file mode 100644
index 000000000000..71b45c90ccae
--- /dev/null
+++ b/include/asm-sparc/timex.h
@@ -0,0 +1,15 @@
+/*
+ * linux/include/asm-sparc/timex.h
+ *
+ * sparc architecture timex specifications
+ */
+#ifndef _ASMsparc_TIMEX_H
+#define _ASMsparc_TIMEX_H
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+
+/* XXX Maybe do something better at some point... -DaveM */
+typedef unsigned long cycles_t;
+#define get_cycles() (0)
+
+#endif
diff --git a/include/asm-sparc/tlb.h b/include/asm-sparc/tlb.h
new file mode 100644
index 000000000000..6d02d1ce53f3
--- /dev/null
+++ b/include/asm-sparc/tlb.h
@@ -0,0 +1,24 @@
+#ifndef _SPARC_TLB_H
+#define _SPARC_TLB_H
+
+#define tlb_start_vma(tlb, vma) \
+do { \
+ flush_cache_range(vma, vma->vm_start, vma->vm_end); \
+} while (0)
+
+#define tlb_end_vma(tlb, vma) \
+do { \
+ flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
+} while (0)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address) \
+ do { } while (0)
+
+#define tlb_flush(tlb) \
+do { \
+ flush_tlb_mm((tlb)->mm); \
+} while (0)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _SPARC_TLB_H */
diff --git a/include/asm-sparc/tlbflush.h b/include/asm-sparc/tlbflush.h
new file mode 100644
index 000000000000..5643ca31ead9
--- /dev/null
+++ b/include/asm-sparc/tlbflush.h
@@ -0,0 +1,63 @@
+#ifndef _SPARC_TLBFLUSH_H
+#define _SPARC_TLBFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+// #include <asm/processor.h>
+
+/*
+ * TLB flushing:
+ *
+ * - flush_tlb() flushes the current mm struct TLBs XXX Exists?
+ * - flush_tlb_all() flushes all processes TLBs
+ * - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ * - flush_tlb_page(vma, vmaddr) flushes one page
+ * - flush_tlb_range(vma, start, end) flushes a range of pages
+ * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+
+#ifdef CONFIG_SMP
+
+BTFIXUPDEF_CALL(void, local_flush_tlb_all, void)
+BTFIXUPDEF_CALL(void, local_flush_tlb_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, local_flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_tlb_page, struct vm_area_struct *, unsigned long)
+
+#define local_flush_tlb_all() BTFIXUP_CALL(local_flush_tlb_all)()
+#define local_flush_tlb_mm(mm) BTFIXUP_CALL(local_flush_tlb_mm)(mm)
+#define local_flush_tlb_range(vma,start,end) BTFIXUP_CALL(local_flush_tlb_range)(vma,start,end)
+#define local_flush_tlb_page(vma,addr) BTFIXUP_CALL(local_flush_tlb_page)(vma,addr)
+
+extern void smp_flush_tlb_all(void);
+extern void smp_flush_tlb_mm(struct mm_struct *mm);
+extern void smp_flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start,
+ unsigned long end);
+extern void smp_flush_tlb_page(struct vm_area_struct *mm, unsigned long page);
+
+#endif /* CONFIG_SMP */
+
+BTFIXUPDEF_CALL(void, flush_tlb_all, void)
+BTFIXUPDEF_CALL(void, flush_tlb_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, flush_tlb_page, struct vm_area_struct *, unsigned long)
+
+// Thanks to Anton Blanchard, our pagetables became uncached in 2.4. Wee!
+// extern void flush_tlb_pgtables(struct mm_struct *mm,
+// unsigned long start, unsigned long end);
+#define flush_tlb_pgtables(mm, start, end) do{ }while(0)
+
+#define flush_tlb_all() BTFIXUP_CALL(flush_tlb_all)()
+#define flush_tlb_mm(mm) BTFIXUP_CALL(flush_tlb_mm)(mm)
+#define flush_tlb_range(vma,start,end) BTFIXUP_CALL(flush_tlb_range)(vma,start,end)
+#define flush_tlb_page(vma,addr) BTFIXUP_CALL(flush_tlb_page)(vma,addr)
+
+// #define flush_tlb() flush_tlb_mm(current->active_mm) /* XXX Sure? */
+
+/*
+ * This is a kludge, until I know better. --zaitcev XXX
+ */
+#define flush_tlb_kernel_range(start, end) flush_tlb_all()
+
+#endif /* _SPARC_TLBFLUSH_H */
diff --git a/include/asm-sparc/topology.h b/include/asm-sparc/topology.h
new file mode 100644
index 000000000000..ee5ac9c9da28
--- /dev/null
+++ b/include/asm-sparc/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SPARC_TOPOLOGY_H
+#define _ASM_SPARC_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_SPARC_TOPOLOGY_H */
diff --git a/include/asm-sparc/traps.h b/include/asm-sparc/traps.h
new file mode 100644
index 000000000000..6690ab956ea6
--- /dev/null
+++ b/include/asm-sparc/traps.h
@@ -0,0 +1,140 @@
+/* $Id: traps.h,v 1.9 1998/03/09 14:04:53 jj Exp $
+ * traps.h: Format of entries for the Sparc trap table.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_TRAPS_H
+#define _SPARC_TRAPS_H
+
+#define NUM_SPARC_TRAPS 255
+
+#ifndef __ASSEMBLY__
+
+/* This is for V8 compliant Sparc CPUS */
+struct tt_entry {
+ unsigned long inst_one;
+ unsigned long inst_two;
+ unsigned long inst_three;
+ unsigned long inst_four;
+};
+
+/* We set this to _start in system setup. */
+extern struct tt_entry *sparc_ttable;
+
+extern __inline__ unsigned long get_tbr(void)
+{
+ unsigned long tbr;
+
+ __asm__ __volatile__("rd %%tbr, %0\n\t" : "=r" (tbr));
+ return tbr;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+/* For patching the trap table at boot time, we need to know how to
+ * form various common Sparc instructions. Thus these macros...
+ */
+
+#define SPARC_MOV_CONST_L3(const) (0xa6102000 | (const&0xfff))
+
+/* The following assumes that the branch lies before the place we
+ * are branching to. This is the case for a trap vector...
+ * You have been warned.
+ */
+#define SPARC_BRANCH(dest_addr, inst_addr) \
+ (0x10800000 | (((dest_addr-inst_addr)>>2)&0x3fffff))
+
+#define SPARC_RD_PSR_L0 (0xa1480000)
+#define SPARC_RD_WIM_L3 (0xa7500000)
+#define SPARC_NOP (0x01000000)
+
+/* Various interesting trap levels. */
+/* First, hardware traps. */
+#define SP_TRAP_TFLT 0x1 /* Text fault */
+#define SP_TRAP_II 0x2 /* Illegal Instruction */
+#define SP_TRAP_PI 0x3 /* Privileged Instruction */
+#define SP_TRAP_FPD 0x4 /* Floating Point Disabled */
+#define SP_TRAP_WOVF 0x5 /* Window Overflow */
+#define SP_TRAP_WUNF 0x6 /* Window Underflow */
+#define SP_TRAP_MNA 0x7 /* Memory Address Unaligned */
+#define SP_TRAP_FPE 0x8 /* Floating Point Exception */
+#define SP_TRAP_DFLT 0x9 /* Data Fault */
+#define SP_TRAP_TOF 0xa /* Tag Overflow */
+#define SP_TRAP_WDOG 0xb /* Watchpoint Detected */
+#define SP_TRAP_IRQ1 0x11 /* IRQ level 1 */
+#define SP_TRAP_IRQ2 0x12 /* IRQ level 2 */
+#define SP_TRAP_IRQ3 0x13 /* IRQ level 3 */
+#define SP_TRAP_IRQ4 0x14 /* IRQ level 4 */
+#define SP_TRAP_IRQ5 0x15 /* IRQ level 5 */
+#define SP_TRAP_IRQ6 0x16 /* IRQ level 6 */
+#define SP_TRAP_IRQ7 0x17 /* IRQ level 7 */
+#define SP_TRAP_IRQ8 0x18 /* IRQ level 8 */
+#define SP_TRAP_IRQ9 0x19 /* IRQ level 9 */
+#define SP_TRAP_IRQ10 0x1a /* IRQ level 10 */
+#define SP_TRAP_IRQ11 0x1b /* IRQ level 11 */
+#define SP_TRAP_IRQ12 0x1c /* IRQ level 12 */
+#define SP_TRAP_IRQ13 0x1d /* IRQ level 13 */
+#define SP_TRAP_IRQ14 0x1e /* IRQ level 14 */
+#define SP_TRAP_IRQ15 0x1f /* IRQ level 15 Non-maskable */
+#define SP_TRAP_RACC 0x20 /* Register Access Error ??? */
+#define SP_TRAP_IACC 0x21 /* Instruction Access Error */
+#define SP_TRAP_CPDIS 0x24 /* Co-Processor Disabled */
+#define SP_TRAP_BADFL 0x25 /* Unimplemented Flush Instruction */
+#define SP_TRAP_CPEXP 0x28 /* Co-Processor Exception */
+#define SP_TRAP_DACC 0x29 /* Data Access Error */
+#define SP_TRAP_DIVZ 0x2a /* Divide By Zero */
+#define SP_TRAP_DSTORE 0x2b /* Data Store Error ??? */
+#define SP_TRAP_DMM 0x2c /* Data Access MMU Miss ??? */
+#define SP_TRAP_IMM 0x3c /* Instruction Access MMU Miss ??? */
+
+/* Now the Software Traps... */
+#define SP_TRAP_SUNOS 0x80 /* SunOS System Call */
+#define SP_TRAP_SBPT 0x81 /* Software Breakpoint */
+#define SP_TRAP_SDIVZ 0x82 /* Software Divide-by-Zero trap */
+#define SP_TRAP_FWIN 0x83 /* Flush Windows */
+#define SP_TRAP_CWIN 0x84 /* Clean Windows */
+#define SP_TRAP_RCHK 0x85 /* Range Check */
+#define SP_TRAP_FUNA 0x86 /* Fix Unaligned Access */
+#define SP_TRAP_IOWFL 0x87 /* Integer Overflow */
+#define SP_TRAP_SOLARIS 0x88 /* Solaris System Call */
+#define SP_TRAP_NETBSD 0x89 /* NetBSD System Call */
+#define SP_TRAP_LINUX 0x90 /* Linux System Call */
+
+/* Names used for compatibility with SunOS */
+#define ST_SYSCALL 0x00
+#define ST_BREAKPOINT 0x01
+#define ST_DIV0 0x02
+#define ST_FLUSH_WINDOWS 0x03
+#define ST_CLEAN_WINDOWS 0x04
+#define ST_RANGE_CHECK 0x05
+#define ST_FIX_ALIGN 0x06
+#define ST_INT_OVERFLOW 0x07
+
+/* Special traps... */
+#define SP_TRAP_KBPT1 0xfe /* KADB/PROM Breakpoint one */
+#define SP_TRAP_KBPT2 0xff /* KADB/PROM Breakpoint two */
+
+/* Handy Macros */
+/* Is this a trap we never expect to get? */
+#define BAD_TRAP_P(level) \
+ ((level > SP_TRAP_WDOG && level < SP_TRAP_IRQ1) || \
+ (level > SP_TRAP_IACC && level < SP_TRAP_CPDIS) || \
+ (level > SP_TRAP_BADFL && level < SP_TRAP_CPEXP) || \
+ (level > SP_TRAP_DMM && level < SP_TRAP_IMM) || \
+ (level > SP_TRAP_IMM && level < SP_TRAP_SUNOS) || \
+ (level > SP_TRAP_LINUX && level < SP_TRAP_KBPT1))
+
+/* Is this a Hardware trap? */
+#define HW_TRAP_P(level) ((level > 0) && (level < SP_TRAP_SUNOS))
+
+/* Is this a Software trap? */
+#define SW_TRAP_P(level) ((level >= SP_TRAP_SUNOS) && (level <= SP_TRAP_KBPT2))
+
+/* Is this a system call for some OS we know about? */
+#define SCALL_TRAP_P(level) ((level == SP_TRAP_SUNOS) || \
+ (level == SP_TRAP_SOLARIS) || \
+ (level == SP_TRAP_NETBSD) || \
+ (level == SP_TRAP_LINUX))
+
+#endif /* !(_SPARC_TRAPS_H) */
diff --git a/include/asm-sparc/tsunami.h b/include/asm-sparc/tsunami.h
new file mode 100644
index 000000000000..887add5c466b
--- /dev/null
+++ b/include/asm-sparc/tsunami.h
@@ -0,0 +1,64 @@
+/* $Id: tsunami.h,v 1.5 1996/08/29 09:49:03 davem Exp $
+ * tsunami.h: Module specific definitions for Tsunami V8 Sparcs
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_TSUNAMI_H
+#define _SPARC_TSUNAMI_H
+
+#include <asm/asi.h>
+
+/* The MMU control register on the Tsunami:
+ *
+ * -----------------------------------------------------------------------
+ * | implvers |SW|AV|DV|MV| RSV |PC|ITD|ALC| RSV |PE| RC |IE|DE|RSV|NF|ME|
+ * -----------------------------------------------------------------------
+ * 31 24 23 22 21 20 19-18 17 16 14 13-12 11 10-9 8 7 6-2 1 0
+ *
+ * SW: Enable Software Table Walks 0=off 1=on
+ * AV: Address View bit
+ * DV: Data View bit
+ * MV: Memory View bit
+ * PC: Parity Control
+ * ITD: ITBR disable
+ * ALC: Alternate Cacheable
+ * PE: Parity Enable 0=off 1=on
+ * RC: Refresh Control
+ * IE: Instruction cache Enable 0=off 1=on
+ * DE: Data cache Enable 0=off 1=on
+ * NF: No Fault, same as all other SRMMUs
+ * ME: MMU Enable, same as all other SRMMUs
+ */
+
+#define TSUNAMI_SW 0x00800000
+#define TSUNAMI_AV 0x00400000
+#define TSUNAMI_DV 0x00200000
+#define TSUNAMI_MV 0x00100000
+#define TSUNAMI_PC 0x00020000
+#define TSUNAMI_ITD 0x00010000
+#define TSUNAMI_ALC 0x00008000
+#define TSUNAMI_PE 0x00001000
+#define TSUNAMI_RCMASK 0x00000C00
+#define TSUNAMI_IENAB 0x00000200
+#define TSUNAMI_DENAB 0x00000100
+#define TSUNAMI_NF 0x00000002
+#define TSUNAMI_ME 0x00000001
+
+static inline void tsunami_flush_icache(void)
+{
+ __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+ : /* no outputs */
+ : "i" (ASI_M_IC_FLCLEAR)
+ : "memory");
+}
+
+static inline void tsunami_flush_dcache(void)
+{
+ __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+ : /* no outputs */
+ : "i" (ASI_M_DC_FLCLEAR)
+ : "memory");
+}
+
+#endif /* !(_SPARC_TSUNAMI_H) */
diff --git a/include/asm-sparc/turbosparc.h b/include/asm-sparc/turbosparc.h
new file mode 100644
index 000000000000..31d2350a5818
--- /dev/null
+++ b/include/asm-sparc/turbosparc.h
@@ -0,0 +1,125 @@
+/* $Id: turbosparc.h,v 1.4 1998/08/16 16:02:42 ecd Exp $
+ * turbosparc.h: Defines specific to the TurboSparc module.
+ * This is SRMMU stuff.
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_TURBOSPARC_H
+#define _SPARC_TURBOSPARC_H
+
+#include <asm/asi.h>
+#include <asm/pgtsrmmu.h>
+
+/* Bits in the SRMMU control register for TurboSparc modules.
+ *
+ * -------------------------------------------------------------------
+ * |impl-vers| RSV| PMC |PE|PC| RSV |BM| RFR |IC|DC|PSO|RSV|ICS|NF|ME|
+ * -------------------------------------------------------------------
+ * 31 24 23-21 20-19 18 17 16-15 14 13-10 9 8 7 6-3 2 1 0
+ *
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ *
+ * This indicates whether the TurboSparc is in boot-mode or not.
+ *
+ * IC: Instruction Cache -- 0 = off, 1 = on
+ * DC: Data Cache -- 0 = off, 1 = 0n
+ *
+ * These bits enable the on-cpu TurboSparc split I/D caches.
+ *
+ * ICS: ICache Snooping -- 0 = disable, 1 = enable snooping of icache
+ * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
+ * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
+ *
+ */
+
+#define TURBOSPARC_MMUENABLE 0x00000001
+#define TURBOSPARC_NOFAULT 0x00000002
+#define TURBOSPARC_ICSNOOP 0x00000004
+#define TURBOSPARC_PSO 0x00000080
+#define TURBOSPARC_DCENABLE 0x00000100 /* Enable data cache */
+#define TURBOSPARC_ICENABLE 0x00000200 /* Enable instruction cache */
+#define TURBOSPARC_BMODE 0x00004000
+#define TURBOSPARC_PARITYODD 0x00020000 /* Parity odd, if enabled */
+#define TURBOSPARC_PCENABLE 0x00040000 /* Enable parity checking */
+
+/* Bits in the CPU configuration register for TurboSparc modules.
+ *
+ * -------------------------------------------------------
+ * |IOClk|SNP|AXClk| RAH | WS | RSV |SBC|WT|uS2|SE|SCC|
+ * -------------------------------------------------------
+ * 31 30 29-28 27-26 25-23 22-8 7-6 5 4 3 2-0
+ *
+ */
+
+#define TURBOSPARC_SCENABLE 0x00000008 /* Secondary cache enable */
+#define TURBOSPARC_uS2 0x00000010 /* Swift compatibility mode */
+#define TURBOSPARC_WTENABLE 0x00000020 /* Write thru for dcache */
+#define TURBOSPARC_SNENABLE 0x40000000 /* DVMA snoop enable */
+
+#ifndef __ASSEMBLY__
+
+/* Bits [13:5] select one of 512 instruction cache tags */
+static inline void turbosparc_inv_insn_tag(unsigned long addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" (addr), "i" (ASI_M_TXTC_TAG)
+ : "memory");
+}
+
+/* Bits [13:5] select one of 512 data cache tags */
+static inline void turbosparc_inv_data_tag(unsigned long addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" (addr), "i" (ASI_M_DATAC_TAG)
+ : "memory");
+}
+
+static inline void turbosparc_flush_icache(void)
+{
+ unsigned long addr;
+
+ for (addr = 0; addr < 0x4000; addr += 0x20)
+ turbosparc_inv_insn_tag(addr);
+}
+
+static inline void turbosparc_flush_dcache(void)
+{
+ unsigned long addr;
+
+ for (addr = 0; addr < 0x4000; addr += 0x20)
+ turbosparc_inv_data_tag(addr);
+}
+
+static inline void turbosparc_idflash_clear(void)
+{
+ unsigned long addr;
+
+ for (addr = 0; addr < 0x4000; addr += 0x20) {
+ turbosparc_inv_insn_tag(addr);
+ turbosparc_inv_data_tag(addr);
+ }
+}
+
+static inline void turbosparc_set_ccreg(unsigned long regval)
+{
+ __asm__ __volatile__("sta %0, [%1] %2\n\t"
+ : /* no outputs */
+ : "r" (regval), "r" (0x600), "i" (ASI_M_MMUREGS)
+ : "memory");
+}
+
+static inline unsigned long turbosparc_get_ccreg(void)
+{
+ unsigned long regval;
+
+ __asm__ __volatile__("lda [%1] %2, %0\n\t"
+ : "=r" (regval)
+ : "r" (0x600), "i" (ASI_M_MMUREGS));
+ return regval;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_TURBOSPARC_H) */
diff --git a/include/asm-sparc/types.h b/include/asm-sparc/types.h
new file mode 100644
index 000000000000..9eabf6e61ccc
--- /dev/null
+++ b/include/asm-sparc/types.h
@@ -0,0 +1,63 @@
+/* $Id: types.h,v 1.13 2001/12/21 01:22:59 davem Exp $ */
+#ifndef _SPARC_TYPES_H
+#define _SPARC_TYPES_H
+
+/*
+ * _xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space.
+ */
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue. However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef __signed__ char s8;
+typedef unsigned char u8;
+
+typedef __signed__ short s16;
+typedef unsigned short u16;
+
+typedef __signed__ int s32;
+typedef unsigned int u32;
+
+typedef __signed__ long long s64;
+typedef unsigned long long u64;
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+typedef unsigned short kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(_SPARC_TYPES_H) */
diff --git a/include/asm-sparc/uaccess.h b/include/asm-sparc/uaccess.h
new file mode 100644
index 000000000000..3f47889883b7
--- /dev/null
+++ b/include/asm-sparc/uaccess.h
@@ -0,0 +1,389 @@
+/* $Id: uaccess.h,v 1.24 2001/10/30 04:32:24 davem Exp $
+ * uaccess.h: User space memore access functions.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <asm/vac-ops.h>
+#include <asm/a.out.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/* Sparc is not segmented, however we need to be able to fool verify_area()
+ * when doing system calls from kernel mode legitimately.
+ *
+ * "For historical reasons, these macros are grossly misnamed." -Linus
+ */
+
+#define KERNEL_DS ((mm_segment_t) { 0 })
+#define USER_DS ((mm_segment_t) { -1 })
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current->thread.current_ds)
+#define set_fs(val) ((current->thread.current_ds) = (val))
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+/* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test
+ * can be fairly lightweight.
+ * No one can read/write anything from userland in the kernel space by setting
+ * large size and address near to PAGE_OFFSET - a fault will break his intentions.
+ */
+#define __user_ok(addr,size) ((addr) < STACK_TOP)
+#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
+#define __access_ok(addr,size) (__user_ok((addr) & get_fs().seg,(size)))
+#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size))
+
+/* this function will go away soon - use access_ok() instead */
+static inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size)
+{
+ return access_ok(type,addr,size) ? 0 : -EFAULT;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ *
+ * There is a special way how to put a range of potentially faulting
+ * insns (like twenty ldd/std's with now intervening other instructions)
+ * You specify address of first in insn and 0 in fixup and in the next
+ * exception_table_entry you specify last potentially faulting insn + 1
+ * and in fixup the routine which should handle the fault.
+ * That fixup code will get
+ * (faulting_insn_address - first_insn_in_the_range_address)/4
+ * in %g2 (ie. index of the faulting instruction in the range).
+ */
+
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_extables_range(unsigned long addr, unsigned long *g2);
+
+extern void __ret_efault(void);
+
+/* Uh, these should become the main single-value transfer routines..
+ * They automatically use the right size if we just have the right
+ * pointer type..
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ */
+#define put_user(x,ptr) ({ \
+unsigned long __pu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__put_user_check((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
+
+#define get_user(x,ptr) ({ \
+unsigned long __gu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__get_user_check((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr) __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)),__typeof__(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) ((struct __large_struct __user *)(x))
+
+#define __put_user_check(x,addr,size) ({ \
+register int __pu_ret; \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(x,,addr,__pu_ret); break; \
+case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} } else { __pu_ret = -EFAULT; } __pu_ret; })
+
+#define __put_user_check_ret(x,addr,size,retval) ({ \
+register int __foo __asm__ ("l1"); \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __put_user_asm_ret(x,b,addr,retval,__foo); break; \
+case 2: __put_user_asm_ret(x,h,addr,retval,__foo); break; \
+case 4: __put_user_asm_ret(x,,addr,retval,__foo); break; \
+case 8: __put_user_asm_ret(x,d,addr,retval,__foo); break; \
+default: if (__put_user_bad()) return retval; break; \
+} } else return retval; })
+
+#define __put_user_nocheck(x,addr,size) ({ \
+register int __pu_ret; \
+switch (size) { \
+case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(x,,addr,__pu_ret); break; \
+case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} __pu_ret; })
+
+#define __put_user_nocheck_ret(x,addr,size,retval) ({ \
+register int __foo __asm__ ("l1"); \
+switch (size) { \
+case 1: __put_user_asm_ret(x,b,addr,retval,__foo); break; \
+case 2: __put_user_asm_ret(x,h,addr,retval,__foo); break; \
+case 4: __put_user_asm_ret(x,,addr,retval,__foo); break; \
+case 8: __put_user_asm_ret(x,d,addr,retval,__foo); break; \
+default: if (__put_user_bad()) return retval; break; \
+} })
+
+#define __put_user_asm(x,size,addr,ret) \
+__asm__ __volatile__( \
+ "/* Put user asm, inline. */\n" \
+"1:\t" "st"#size " %1, %2\n\t" \
+ "clr %0\n" \
+"2:\n\n\t" \
+ ".section .fixup,#alloc,#execinstr\n\t" \
+ ".align 4\n" \
+"3:\n\t" \
+ "b 2b\n\t" \
+ " mov %3, %0\n\t" \
+ ".previous\n\n\t" \
+ ".section __ex_table,#alloc\n\t" \
+ ".align 4\n\t" \
+ ".word 1b, 3b\n\t" \
+ ".previous\n\n\t" \
+ : "=&r" (ret) : "r" (x), "m" (*__m(addr)), \
+ "i" (-EFAULT))
+
+#define __put_user_asm_ret(x,size,addr,ret,foo) \
+if (__builtin_constant_p(ret) && ret == -EFAULT) \
+__asm__ __volatile__( \
+ "/* Put user asm ret, inline. */\n" \
+"1:\t" "st"#size " %1, %2\n\n\t" \
+ ".section __ex_table,#alloc\n\t" \
+ ".align 4\n\t" \
+ ".word 1b, __ret_efault\n\n\t" \
+ ".previous\n\n\t" \
+ : "=r" (foo) : "r" (x), "m" (*__m(addr))); \
+else \
+__asm__ __volatile( \
+ "/* Put user asm ret, inline. */\n" \
+"1:\t" "st"#size " %1, %2\n\n\t" \
+ ".section .fixup,#alloc,#execinstr\n\t" \
+ ".align 4\n" \
+"3:\n\t" \
+ "ret\n\t" \
+ " restore %%g0, %3, %%o0\n\t" \
+ ".previous\n\n\t" \
+ ".section __ex_table,#alloc\n\t" \
+ ".align 4\n\t" \
+ ".word 1b, 3b\n\n\t" \
+ ".previous\n\n\t" \
+ : "=r" (foo) : "r" (x), "m" (*__m(addr)), "i" (ret))
+
+extern int __put_user_bad(void);
+
+#define __get_user_check(x,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} } else { __gu_val = 0; __gu_ret = -EFAULT; } x = (type) __gu_val; __gu_ret; })
+
+#define __get_user_check_ret(x,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} x = (type) __gu_val; } else return retval; })
+
+#define __get_user_nocheck(x,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} x = (type) __gu_val; __gu_ret; })
+
+#define __get_user_nocheck_ret(x,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} x = (type) __gu_val; })
+
+#define __get_user_asm(x,size,addr,ret) \
+__asm__ __volatile__( \
+ "/* Get user asm, inline. */\n" \
+"1:\t" "ld"#size " %2, %1\n\t" \
+ "clr %0\n" \
+"2:\n\n\t" \
+ ".section .fixup,#alloc,#execinstr\n\t" \
+ ".align 4\n" \
+"3:\n\t" \
+ "clr %1\n\t" \
+ "b 2b\n\t" \
+ " mov %3, %0\n\n\t" \
+ ".previous\n\t" \
+ ".section __ex_table,#alloc\n\t" \
+ ".align 4\n\t" \
+ ".word 1b, 3b\n\n\t" \
+ ".previous\n\t" \
+ : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)), \
+ "i" (-EFAULT))
+
+#define __get_user_asm_ret(x,size,addr,retval) \
+if (__builtin_constant_p(retval) && retval == -EFAULT) \
+__asm__ __volatile__( \
+ "/* Get user asm ret, inline. */\n" \
+"1:\t" "ld"#size " %1, %0\n\n\t" \
+ ".section __ex_table,#alloc\n\t" \
+ ".align 4\n\t" \
+ ".word 1b,__ret_efault\n\n\t" \
+ ".previous\n\t" \
+ : "=&r" (x) : "m" (*__m(addr))); \
+else \
+__asm__ __volatile__( \
+ "/* Get user asm ret, inline. */\n" \
+"1:\t" "ld"#size " %1, %0\n\n\t" \
+ ".section .fixup,#alloc,#execinstr\n\t" \
+ ".align 4\n" \
+"3:\n\t" \
+ "ret\n\t" \
+ " restore %%g0, %2, %%o0\n\n\t" \
+ ".previous\n\t" \
+ ".section __ex_table,#alloc\n\t" \
+ ".align 4\n\t" \
+ ".word 1b, 3b\n\n\t" \
+ ".previous\n\t" \
+ : "=&r" (x) : "m" (*__m(addr)), "i" (retval))
+
+extern int __get_user_bad(void);
+
+extern unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size);
+
+static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ if (n && __access_ok((unsigned long) to, n))
+ return __copy_user(to, (__force void __user *) from, n);
+ else
+ return n;
+}
+
+static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ return __copy_user(to, (__force void __user *) from, n);
+}
+
+static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ if (n && __access_ok((unsigned long) from, n))
+ return __copy_user((__force void __user *) to, from, n);
+ else
+ return n;
+}
+
+static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ return __copy_user((__force void __user *) to, from, n);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+static inline unsigned long __clear_user(void __user *addr, unsigned long size)
+{
+ unsigned long ret;
+
+ __asm__ __volatile__ (
+ ".section __ex_table,#alloc\n\t"
+ ".align 4\n\t"
+ ".word 1f,3\n\t"
+ ".previous\n\t"
+ "mov %2, %%o1\n"
+ "1:\n\t"
+ "call __bzero\n\t"
+ " mov %1, %%o0\n\t"
+ "mov %%o0, %0\n"
+ : "=r" (ret) : "r" (addr), "r" (size) :
+ "o0", "o1", "o2", "o3", "o4", "o5", "o7",
+ "g1", "g2", "g3", "g4", "g5", "g7", "cc");
+
+ return ret;
+}
+
+static inline unsigned long clear_user(void __user *addr, unsigned long n)
+{
+ if (n && __access_ok((unsigned long) addr, n))
+ return __clear_user(addr, n);
+ else
+ return n;
+}
+
+extern long __strncpy_from_user(char *dest, const char __user *src, long count);
+
+static inline long strncpy_from_user(char *dest, const char __user *src, long count)
+{
+ if (__access_ok((unsigned long) src, count))
+ return __strncpy_from_user(dest, src, count);
+ else
+ return -EFAULT;
+}
+
+extern long __strlen_user(const char __user *);
+extern long __strnlen_user(const char __user *, long len);
+
+static inline long strlen_user(const char __user *str)
+{
+ if (!access_ok(VERIFY_READ, str, 0))
+ return 0;
+ else
+ return __strlen_user(str);
+}
+
+static inline long strnlen_user(const char __user *str, long len)
+{
+ if (!access_ok(VERIFY_READ, str, 0))
+ return 0;
+ else
+ return __strnlen_user(str, len);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UACCESS_H */
diff --git a/include/asm-sparc/unaligned.h b/include/asm-sparc/unaligned.h
new file mode 100644
index 000000000000..b6f8eddd30af
--- /dev/null
+++ b/include/asm-sparc/unaligned.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SPARC_UNALIGNED_H_
+#define _ASM_SPARC_UNALIGNED_H_
+
+#include <asm-generic/unaligned.h>
+
+#endif /* _ASM_SPARC_UNALIGNED_H */
diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h
new file mode 100644
index 000000000000..d1f63caaa326
--- /dev/null
+++ b/include/asm-sparc/unistd.h
@@ -0,0 +1,518 @@
+/* $Id: unistd.h,v 1.74 2002/02/08 03:57:18 davem Exp $ */
+#ifndef _SPARC_UNISTD_H
+#define _SPARC_UNISTD_H
+
+/*
+ * System calls under the Sparc.
+ *
+ * Don't be scared by the ugly clobbers, it is the only way I can
+ * think of right now to force the arguments into fixed registers
+ * before the trap into the system call with gcc 'asm' statements.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * SunOS compatibility based upon preliminary work which is:
+ *
+ * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
+ */
+
+#define __NR_restart_syscall 0 /* Linux Specific */
+#define __NR_exit 1 /* Common */
+#define __NR_fork 2 /* Common */
+#define __NR_read 3 /* Common */
+#define __NR_write 4 /* Common */
+#define __NR_open 5 /* Common */
+#define __NR_close 6 /* Common */
+#define __NR_wait4 7 /* Common */
+#define __NR_creat 8 /* Common */
+#define __NR_link 9 /* Common */
+#define __NR_unlink 10 /* Common */
+#define __NR_execv 11 /* SunOS Specific */
+#define __NR_chdir 12 /* Common */
+#define __NR_chown 13 /* Common */
+#define __NR_mknod 14 /* Common */
+#define __NR_chmod 15 /* Common */
+#define __NR_lchown 16 /* Common */
+#define __NR_brk 17 /* Common */
+#define __NR_perfctr 18 /* Performance counter operations */
+#define __NR_lseek 19 /* Common */
+#define __NR_getpid 20 /* Common */
+#define __NR_capget 21 /* Linux Specific */
+#define __NR_capset 22 /* Linux Specific */
+#define __NR_setuid 23 /* Implemented via setreuid in SunOS */
+#define __NR_getuid 24 /* Common */
+/* #define __NR_time alias 25 ENOSYS under SunOS */
+#define __NR_ptrace 26 /* Common */
+#define __NR_alarm 27 /* Implemented via setitimer in SunOS */
+#define __NR_sigaltstack 28 /* Common */
+#define __NR_pause 29 /* Is sigblock(0)->sigpause() in SunOS */
+#define __NR_utime 30 /* Implemented via utimes() under SunOS */
+#define __NR_lchown32 31 /* Linux sparc32 specific */
+#define __NR_fchown32 32 /* Linux sparc32 specific */
+#define __NR_access 33 /* Common */
+#define __NR_nice 34 /* Implemented via get/setpriority() in SunOS */
+#define __NR_chown32 35 /* Linux sparc32 specific */
+#define __NR_sync 36 /* Common */
+#define __NR_kill 37 /* Common */
+#define __NR_stat 38 /* Common */
+#define __NR_sendfile 39 /* Linux Specific */
+#define __NR_lstat 40 /* Common */
+#define __NR_dup 41 /* Common */
+#define __NR_pipe 42 /* Common */
+#define __NR_times 43 /* Implemented via getrusage() in SunOS */
+#define __NR_getuid32 44 /* Linux sparc32 specific */
+#define __NR_umount2 45 /* Linux Specific */
+#define __NR_setgid 46 /* Implemented via setregid() in SunOS */
+#define __NR_getgid 47 /* Common */
+#define __NR_signal 48 /* Implemented via sigvec() in SunOS */
+#define __NR_geteuid 49 /* SunOS calls getuid() */
+#define __NR_getegid 50 /* SunOS calls getgid() */
+#define __NR_acct 51 /* Common */
+/* #define __NR_memory_ordering 52 Linux sparc64 specific */
+#define __NR_getgid32 53 /* Linux sparc32 specific */
+#define __NR_ioctl 54 /* Common */
+#define __NR_reboot 55 /* Common */
+#define __NR_mmap2 56 /* Linux sparc32 Specific */
+#define __NR_symlink 57 /* Common */
+#define __NR_readlink 58 /* Common */
+#define __NR_execve 59 /* Common */
+#define __NR_umask 60 /* Common */
+#define __NR_chroot 61 /* Common */
+#define __NR_fstat 62 /* Common */
+#define __NR_fstat64 63 /* Linux sparc32 Specific */
+#define __NR_getpagesize 64 /* Common */
+#define __NR_msync 65 /* Common in newer 1.3.x revs... */
+#define __NR_vfork 66 /* Common */
+#define __NR_pread64 67 /* Linux Specific */
+#define __NR_pwrite64 68 /* Linux Specific */
+#define __NR_geteuid32 69 /* Linux sparc32, sbrk under SunOS */
+#define __NR_getegid32 70 /* Linux sparc32, sstk under SunOS */
+#define __NR_mmap 71 /* Common */
+#define __NR_setreuid32 72 /* Linux sparc32, vadvise under SunOS */
+#define __NR_munmap 73 /* Common */
+#define __NR_mprotect 74 /* Common */
+#define __NR_madvise 75 /* Common */
+#define __NR_vhangup 76 /* Common */
+#define __NR_truncate64 77 /* Linux sparc32 Specific */
+#define __NR_mincore 78 /* Common */
+#define __NR_getgroups 79 /* Common */
+#define __NR_setgroups 80 /* Common */
+#define __NR_getpgrp 81 /* Common */
+#define __NR_setgroups32 82 /* Linux sparc32, setpgrp under SunOS */
+#define __NR_setitimer 83 /* Common */
+#define __NR_ftruncate64 84 /* Linux sparc32 Specific */
+#define __NR_swapon 85 /* Common */
+#define __NR_getitimer 86 /* Common */
+#define __NR_setuid32 87 /* Linux sparc32, gethostname under SunOS */
+#define __NR_sethostname 88 /* Common */
+#define __NR_setgid32 89 /* Linux sparc32, getdtablesize under SunOS */
+#define __NR_dup2 90 /* Common */
+#define __NR_setfsuid32 91 /* Linux sparc32, getdopt under SunOS */
+#define __NR_fcntl 92 /* Common */
+#define __NR_select 93 /* Common */
+#define __NR_setfsgid32 94 /* Linux sparc32, setdopt under SunOS */
+#define __NR_fsync 95 /* Common */
+#define __NR_setpriority 96 /* Common */
+#define __NR_socket 97 /* Common */
+#define __NR_connect 98 /* Common */
+#define __NR_accept 99 /* Common */
+#define __NR_getpriority 100 /* Common */
+#define __NR_rt_sigreturn 101 /* Linux Specific */
+#define __NR_rt_sigaction 102 /* Linux Specific */
+#define __NR_rt_sigprocmask 103 /* Linux Specific */
+#define __NR_rt_sigpending 104 /* Linux Specific */
+#define __NR_rt_sigtimedwait 105 /* Linux Specific */
+#define __NR_rt_sigqueueinfo 106 /* Linux Specific */
+#define __NR_rt_sigsuspend 107 /* Linux Specific */
+#define __NR_setresuid32 108 /* Linux Specific, sigvec under SunOS */
+#define __NR_getresuid32 109 /* Linux Specific, sigblock under SunOS */
+#define __NR_setresgid32 110 /* Linux Specific, sigsetmask under SunOS */
+#define __NR_getresgid32 111 /* Linux Specific, sigpause under SunOS */
+#define __NR_setregid32 112 /* Linux sparc32, sigstack under SunOS */
+#define __NR_recvmsg 113 /* Common */
+#define __NR_sendmsg 114 /* Common */
+#define __NR_getgroups32 115 /* Linux sparc32, vtrace under SunOS */
+#define __NR_gettimeofday 116 /* Common */
+#define __NR_getrusage 117 /* Common */
+#define __NR_getsockopt 118 /* Common */
+#define __NR_getcwd 119 /* Linux Specific */
+#define __NR_readv 120 /* Common */
+#define __NR_writev 121 /* Common */
+#define __NR_settimeofday 122 /* Common */
+#define __NR_fchown 123 /* Common */
+#define __NR_fchmod 124 /* Common */
+#define __NR_recvfrom 125 /* Common */
+#define __NR_setreuid 126 /* Common */
+#define __NR_setregid 127 /* Common */
+#define __NR_rename 128 /* Common */
+#define __NR_truncate 129 /* Common */
+#define __NR_ftruncate 130 /* Common */
+#define __NR_flock 131 /* Common */
+#define __NR_lstat64 132 /* Linux sparc32 Specific */
+#define __NR_sendto 133 /* Common */
+#define __NR_shutdown 134 /* Common */
+#define __NR_socketpair 135 /* Common */
+#define __NR_mkdir 136 /* Common */
+#define __NR_rmdir 137 /* Common */
+#define __NR_utimes 138 /* SunOS Specific */
+#define __NR_stat64 139 /* Linux sparc32 Specific */
+#define __NR_sendfile64 140 /* adjtime under SunOS */
+#define __NR_getpeername 141 /* Common */
+#define __NR_futex 142 /* gethostid under SunOS */
+#define __NR_gettid 143 /* ENOSYS under SunOS */
+#define __NR_getrlimit 144 /* Common */
+#define __NR_setrlimit 145 /* Common */
+#define __NR_pivot_root 146 /* Linux Specific, killpg under SunOS */
+#define __NR_prctl 147 /* ENOSYS under SunOS */
+#define __NR_pciconfig_read 148 /* ENOSYS under SunOS */
+#define __NR_pciconfig_write 149 /* ENOSYS under SunOS */
+#define __NR_getsockname 150 /* Common */
+/* #define __NR_getmsg 151 SunOS Specific */
+/* #define __NR_putmsg 152 SunOS Specific */
+#define __NR_poll 153 /* Common */
+#define __NR_getdents64 154 /* Linux specific */
+#define __NR_fcntl64 155 /* Linux sparc32 Specific */
+/* #define __NR_getdirentires 156 SunOS Specific */
+#define __NR_statfs 157 /* Common */
+#define __NR_fstatfs 158 /* Common */
+#define __NR_umount 159 /* Common */
+#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS */
+#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS */
+#define __NR_getdomainname 162 /* SunOS Specific */
+#define __NR_setdomainname 163 /* Common */
+/* #define __NR_ni_syscall 164 ENOSYS under SunOS */
+#define __NR_quotactl 165 /* Common */
+#define __NR_set_tid_address 166 /* Linux specific, exportfs under SunOS */
+#define __NR_mount 167 /* Common */
+#define __NR_ustat 168 /* Common */
+#define __NR_setxattr 169 /* SunOS: semsys */
+#define __NR_lsetxattr 170 /* SunOS: msgsys */
+#define __NR_fsetxattr 171 /* SunOS: shmsys */
+#define __NR_getxattr 172 /* SunOS: auditsys */
+#define __NR_lgetxattr 173 /* SunOS: rfssys */
+#define __NR_getdents 174 /* Common */
+#define __NR_setsid 175 /* Common */
+#define __NR_fchdir 176 /* Common */
+#define __NR_fgetxattr 177 /* SunOS: fchroot */
+#define __NR_listxattr 178 /* SunOS: vpixsys */
+#define __NR_llistxattr 179 /* SunOS: aioread */
+#define __NR_flistxattr 180 /* SunOS: aiowrite */
+#define __NR_removexattr 181 /* SunOS: aiowait */
+#define __NR_lremovexattr 182 /* SunOS: aiocancel */
+#define __NR_sigpending 183 /* Common */
+#define __NR_query_module 184 /* Linux Specific */
+#define __NR_setpgid 185 /* Common */
+#define __NR_fremovexattr 186 /* SunOS: pathconf */
+#define __NR_tkill 187 /* SunOS: fpathconf */
+#define __NR_exit_group 188 /* Linux specific, sysconf undef SunOS */
+#define __NR_uname 189 /* Linux Specific */
+#define __NR_init_module 190 /* Linux Specific */
+#define __NR_personality 191 /* Linux Specific */
+#define __NR_remap_file_pages 192 /* Linux Specific */
+#define __NR_epoll_create 193 /* Linux Specific */
+#define __NR_epoll_ctl 194 /* Linux Specific */
+#define __NR_epoll_wait 195 /* Linux Specific */
+/* #define __NR_ulimit 196 Linux Specific */
+#define __NR_getppid 197 /* Linux Specific */
+#define __NR_sigaction 198 /* Linux Specific */
+#define __NR_sgetmask 199 /* Linux Specific */
+#define __NR_ssetmask 200 /* Linux Specific */
+#define __NR_sigsuspend 201 /* Linux Specific */
+#define __NR_oldlstat 202 /* Linux Specific */
+#define __NR_uselib 203 /* Linux Specific */
+#define __NR_readdir 204 /* Linux Specific */
+#define __NR_readahead 205 /* Linux Specific */
+#define __NR_socketcall 206 /* Linux Specific */
+#define __NR_syslog 207 /* Linux Specific */
+#define __NR_lookup_dcookie 208 /* Linux Specific */
+#define __NR_fadvise64 209 /* Linux Specific */
+#define __NR_fadvise64_64 210 /* Linux Specific */
+#define __NR_tgkill 211 /* Linux Specific */
+#define __NR_waitpid 212 /* Linux Specific */
+#define __NR_swapoff 213 /* Linux Specific */
+#define __NR_sysinfo 214 /* Linux Specific */
+#define __NR_ipc 215 /* Linux Specific */
+#define __NR_sigreturn 216 /* Linux Specific */
+#define __NR_clone 217 /* Linux Specific */
+/* #define __NR_modify_ldt 218 Linux Specific - i386 specific, unused */
+#define __NR_adjtimex 219 /* Linux Specific */
+#define __NR_sigprocmask 220 /* Linux Specific */
+#define __NR_create_module 221 /* Linux Specific */
+#define __NR_delete_module 222 /* Linux Specific */
+#define __NR_get_kernel_syms 223 /* Linux Specific */
+#define __NR_getpgid 224 /* Linux Specific */
+#define __NR_bdflush 225 /* Linux Specific */
+#define __NR_sysfs 226 /* Linux Specific */
+#define __NR_afs_syscall 227 /* Linux Specific */
+#define __NR_setfsuid 228 /* Linux Specific */
+#define __NR_setfsgid 229 /* Linux Specific */
+#define __NR__newselect 230 /* Linux Specific */
+#define __NR_time 231 /* Linux Specific */
+/* #define __NR_oldstat 232 Linux Specific */
+#define __NR_stime 233 /* Linux Specific */
+#define __NR_statfs64 234 /* Linux Specific */
+#define __NR_fstatfs64 235 /* Linux Specific */
+#define __NR__llseek 236 /* Linux Specific */
+#define __NR_mlock 237
+#define __NR_munlock 238
+#define __NR_mlockall 239
+#define __NR_munlockall 240
+#define __NR_sched_setparam 241
+#define __NR_sched_getparam 242
+#define __NR_sched_setscheduler 243
+#define __NR_sched_getscheduler 244
+#define __NR_sched_yield 245
+#define __NR_sched_get_priority_max 246
+#define __NR_sched_get_priority_min 247
+#define __NR_sched_rr_get_interval 248
+#define __NR_nanosleep 249
+#define __NR_mremap 250
+#define __NR__sysctl 251
+#define __NR_getsid 252
+#define __NR_fdatasync 253
+#define __NR_nfsservctl 254
+#define __NR_aplib 255
+#define __NR_clock_settime 256
+#define __NR_clock_gettime 257
+#define __NR_clock_getres 258
+#define __NR_clock_nanosleep 259
+#define __NR_sched_getaffinity 260
+#define __NR_sched_setaffinity 261
+#define __NR_timer_settime 262
+#define __NR_timer_gettime 263
+#define __NR_timer_getoverrun 264
+#define __NR_timer_delete 265
+#define __NR_timer_create 266
+/* #define __NR_vserver 267 Reserved for VSERVER */
+#define __NR_io_setup 268
+#define __NR_io_destroy 269
+#define __NR_io_submit 270
+#define __NR_io_cancel 271
+#define __NR_io_getevents 272
+#define __NR_mq_open 273
+#define __NR_mq_unlink 274
+#define __NR_mq_timedsend 275
+#define __NR_mq_timedreceive 276
+#define __NR_mq_notify 277
+#define __NR_mq_getsetattr 278
+#define __NR_waitid 279
+#define __NR_sys_setaltroot 280
+#define __NR_add_key 281
+#define __NR_request_key 282
+#define __NR_keyctl 283
+
+/* WARNING: You MAY NOT add syscall numbers larger than 283, since
+ * all of the syscall tables in the Sparc kernel are
+ * sized to have 283 entries (starting at zero). Therefore
+ * find a free slot in the 0-282 range.
+ */
+
+#define _syscall0(type,name) \
+type name(void) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+__asm__ __volatile__ ("t 0x10\n\t" \
+ "bcc 1f\n\t" \
+ "mov %%o0, %0\n\t" \
+ "sub %%g0, %%o0, %0\n\t" \
+ "1:\n\t" \
+ : "=r" (__res)\
+ : "r" (__g1) \
+ : "o0", "cc"); \
+if (__res < -255 || __res >= 0) \
+ return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#define _syscall1(type,name,type1,arg1) \
+type name(type1 arg1) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+__asm__ __volatile__ ("t 0x10\n\t" \
+ "bcc 1f\n\t" \
+ "mov %%o0, %0\n\t" \
+ "sub %%g0, %%o0, %0\n\t" \
+ "1:\n\t" \
+ : "=r" (__res), "=&r" (__o0) \
+ : "1" (__o0), "r" (__g1) \
+ : "cc"); \
+if (__res < -255 || __res >= 0) \
+ return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2) \
+type name(type1 arg1,type2 arg2) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+register long __o1 __asm__ ("o1") = (long)(arg2); \
+__asm__ __volatile__ ("t 0x10\n\t" \
+ "bcc 1f\n\t" \
+ "mov %%o0, %0\n\t" \
+ "sub %%g0, %%o0, %0\n\t" \
+ "1:\n\t" \
+ : "=r" (__res), "=&r" (__o0) \
+ : "1" (__o0), "r" (__o1), "r" (__g1) \
+ : "cc"); \
+if (__res < -255 || __res >= 0) \
+ return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
+type name(type1 arg1,type2 arg2,type3 arg3) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+register long __o1 __asm__ ("o1") = (long)(arg2); \
+register long __o2 __asm__ ("o2") = (long)(arg3); \
+__asm__ __volatile__ ("t 0x10\n\t" \
+ "bcc 1f\n\t" \
+ "mov %%o0, %0\n\t" \
+ "sub %%g0, %%o0, %0\n\t" \
+ "1:\n\t" \
+ : "=r" (__res), "=&r" (__o0) \
+ : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__g1) \
+ : "cc"); \
+if (__res < -255 || __res>=0) \
+ return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+register long __o1 __asm__ ("o1") = (long)(arg2); \
+register long __o2 __asm__ ("o2") = (long)(arg3); \
+register long __o3 __asm__ ("o3") = (long)(arg4); \
+__asm__ __volatile__ ("t 0x10\n\t" \
+ "bcc 1f\n\t" \
+ "mov %%o0, %0\n\t" \
+ "sub %%g0, %%o0, %0\n\t" \
+ "1:\n\t" \
+ : "=r" (__res), "=&r" (__o0) \
+ : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__g1) \
+ : "cc"); \
+if (__res < -255 || __res>=0) \
+ return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
+ type5,arg5) \
+type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+register long __o1 __asm__ ("o1") = (long)(arg2); \
+register long __o2 __asm__ ("o2") = (long)(arg3); \
+register long __o3 __asm__ ("o3") = (long)(arg4); \
+register long __o4 __asm__ ("o4") = (long)(arg5); \
+__asm__ __volatile__ ("t 0x10\n\t" \
+ "bcc 1f\n\t" \
+ "mov %%o0, %0\n\t" \
+ "sub %%g0, %%o0, %0\n\t" \
+ "1:\n\t" \
+ : "=r" (__res), "=&r" (__o0) \
+ : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__o4), "r" (__g1) \
+ : "cc"); \
+if (__res < -255 || __res>=0) \
+ return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+#define __NR__exit __NR_exit
+static __inline__ _syscall0(pid_t,setsid)
+static __inline__ _syscall3(int,write,int,fd,__const__ char *,buf,off_t,count)
+static __inline__ _syscall3(int,read,int,fd,char *,buf,off_t,count)
+static __inline__ _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
+static __inline__ _syscall1(int,dup,int,fd)
+static __inline__ _syscall3(int,execve,__const__ char *,file,char **,argv,char **,envp)
+static __inline__ _syscall3(int,open,__const__ char *,file,int,flag,int,mode)
+static __inline__ _syscall1(int,close,int,fd)
+static __inline__ _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
+
+#include <linux/linkage.h>
+
+asmlinkage unsigned long sys_mmap(
+ unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long off);
+asmlinkage unsigned long sys_mmap2(
+ unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+ const struct sigaction __user *act,
+ struct sigaction __user *oact,
+ void __user *restorer,
+ size_t sigsetsize);
+
+#endif /* __KERNEL_SYSCALLS__ */
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* _SPARC_UNISTD_H */
diff --git a/include/asm-sparc/user.h b/include/asm-sparc/user.h
new file mode 100644
index 000000000000..b5f1abf733d5
--- /dev/null
+++ b/include/asm-sparc/user.h
@@ -0,0 +1,60 @@
+/* $Id: user.h,v 1.5 1998/02/23 01:49:22 rth Exp $
+ * asm-sparc/user.h: Core file definitions for the Sparc.
+ *
+ * Keep in sync with reg.h. Actually, we could get rid of this
+ * one, since we won't a.out core dump that much anyways - miguel.
+ * Copyright (C) 1995 (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_USER_H
+#define _SPARC_USER_H
+
+#include <asm/a.out.h>
+struct sunos_regs {
+ unsigned long psr, pc, npc, y;
+ unsigned long regs[15];
+};
+
+struct sunos_fpqueue {
+ unsigned long *addr;
+ unsigned long inst;
+};
+
+struct sunos_fp {
+ union {
+ unsigned long regs[32];
+ double reg_dbls[16];
+ } fregs;
+ unsigned long fsr;
+ unsigned long flags;
+ unsigned long extra;
+ unsigned long fpq_count;
+ struct sunos_fpqueue fpq[16];
+};
+
+struct sunos_fpu {
+ struct sunos_fp fpstatus;
+};
+
+/* The SunOS core file header layout. */
+struct user {
+ unsigned long magic;
+ unsigned long len;
+ struct sunos_regs regs;
+ struct exec uexec;
+ int signal;
+ size_t u_tsize; /* all of these in bytes! */
+ size_t u_dsize;
+ size_t u_ssize;
+ char u_comm[17];
+ struct sunos_fpu fpu;
+ unsigned long sigcode; /* Special sigcontext subcode, if any */
+};
+
+#define NBPG 0x2000
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_DATA_START_ADDR (u.uexec.a_data)
+#define HOST_STACK_END_ADDR (- u.u_ssize * NBPG)
+#define SUNOS_CORE_MAGIC 0x080456
+
+#endif /* !(_SPARC_USER_H) */
diff --git a/include/asm-sparc/vac-ops.h b/include/asm-sparc/vac-ops.h
new file mode 100644
index 000000000000..9e0172323042
--- /dev/null
+++ b/include/asm-sparc/vac-ops.h
@@ -0,0 +1,136 @@
+/* $Id: vac-ops.h,v 1.13 1998/01/30 10:59:59 jj Exp $ */
+#ifndef _SPARC_VAC_OPS_H
+#define _SPARC_VAC_OPS_H
+
+/* vac-ops.h: Inline assembly routines to do operations on the Sparc
+ * VAC (virtual address cache) for the sun4c.
+ *
+ * Copyright (C) 1994, David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <linux/config.h>
+#include <asm/sysen.h>
+#include <asm/contregs.h>
+#include <asm/asi.h>
+
+/* The SUN4C models have a virtually addressed write-through
+ * cache.
+ *
+ * The cache tags are directly accessible through an ASI and
+ * each have the form:
+ *
+ * ------------------------------------------------------------
+ * | MBZ | CONTEXT | WRITE | PRIV | VALID | MBZ | TagID | MBZ |
+ * ------------------------------------------------------------
+ * 31 25 24 22 21 20 19 18 16 15 2 1 0
+ *
+ * MBZ: These bits are either unused and/or reserved and should
+ * be written as zeroes.
+ *
+ * CONTEXT: Records the context to which this cache line belongs.
+ *
+ * WRITE: A copy of the writable bit from the mmu pte access bits.
+ *
+ * PRIV: A copy of the privileged bit from the pte access bits.
+ *
+ * VALID: If set, this line is valid, else invalid.
+ *
+ * TagID: Fourteen bits of tag ID.
+ *
+ * Every virtual address is seen by the cache like this:
+ *
+ * ----------------------------------------
+ * | RESV | TagID | LINE | BYTE-in-LINE |
+ * ----------------------------------------
+ * 31 30 29 16 15 4 3 0
+ *
+ * RESV: Unused/reserved.
+ *
+ * TagID: Used to match the Tag-ID in that vac tags.
+ *
+ * LINE: Which line within the cache
+ *
+ * BYTE-in-LINE: Which byte within the cache line.
+ */
+
+/* Sun4c VAC Tags */
+#define S4CVACTAG_CID 0x01c00000
+#define S4CVACTAG_W 0x00200000
+#define S4CVACTAG_P 0x00100000
+#define S4CVACTAG_V 0x00080000
+#define S4CVACTAG_TID 0x0000fffc
+
+/* Sun4c VAC Virtual Address */
+/* These aren't used, why bother? (Anton) */
+#if 0
+#define S4CVACVA_TID 0x3fff0000
+#define S4CVACVA_LINE 0x0000fff0
+#define S4CVACVA_BIL 0x0000000f
+#endif
+
+/* The indexing of cache lines creates a problem. Because the line
+ * field of a virtual address extends past the page offset within
+ * the virtual address it is possible to have what are called
+ * 'bad aliases' which will create inconsistencies. So we must make
+ * sure that within a context that if a physical page is mapped
+ * more than once, that 'extra' line bits are the same. If this is
+ * not the case, and thus is a 'bad alias' we must turn off the
+ * cacheable bit in the pte's of all such pages.
+ */
+
+#ifdef CONFIG_SUN4
+#define S4CVAC_BADBITS 0x0001e000
+#else
+#define S4CVAC_BADBITS 0x0000f000
+#endif
+
+/* The following is true if vaddr1 and vaddr2 would cause
+ * a 'bad alias'.
+ */
+#define S4CVAC_BADALIAS(vaddr1, vaddr2) \
+ ((((unsigned long) (vaddr1)) ^ ((unsigned long) (vaddr2))) & \
+ (S4CVAC_BADBITS))
+
+/* The following structure describes the characteristics of a sun4c
+ * VAC as probed from the prom during boot time.
+ */
+struct sun4c_vac_props {
+ unsigned int num_bytes; /* Size of the cache */
+ unsigned int num_lines; /* Number of cache lines */
+ unsigned int do_hwflushes; /* Hardware flushing available? */
+ enum { VAC_NONE, VAC_WRITE_THROUGH,
+ VAC_WRITE_BACK } type; /* What type of VAC? */
+ unsigned int linesize; /* Size of each line in bytes */
+ unsigned int log2lsize; /* log2(linesize) */
+ unsigned int on; /* VAC is enabled */
+};
+
+extern struct sun4c_vac_props sun4c_vacinfo;
+
+/* sun4c_enable_vac() enables the sun4c virtual address cache. */
+static inline void sun4c_enable_vac(void)
+{
+ __asm__ __volatile__("lduba [%0] %1, %%g1\n\t"
+ "or %%g1, %2, %%g1\n\t"
+ "stba %%g1, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" ((unsigned int) AC_SENABLE),
+ "i" (ASI_CONTROL), "i" (SENABLE_CACHE)
+ : "g1", "memory");
+ sun4c_vacinfo.on = 1;
+}
+
+/* sun4c_disable_vac() disables the virtual address cache. */
+static inline void sun4c_disable_vac(void)
+{
+ __asm__ __volatile__("lduba [%0] %1, %%g1\n\t"
+ "andn %%g1, %2, %%g1\n\t"
+ "stba %%g1, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" ((unsigned int) AC_SENABLE),
+ "i" (ASI_CONTROL), "i" (SENABLE_CACHE)
+ : "g1", "memory");
+ sun4c_vacinfo.on = 0;
+}
+
+#endif /* !(_SPARC_VAC_OPS_H) */
diff --git a/include/asm-sparc/vaddrs.h b/include/asm-sparc/vaddrs.h
new file mode 100644
index 000000000000..91097392c8cc
--- /dev/null
+++ b/include/asm-sparc/vaddrs.h
@@ -0,0 +1,70 @@
+/* $Id: vaddrs.h,v 1.27 2001/07/04 00:18:18 davem Exp $ */
+#ifndef _SPARC_VADDRS_H
+#define _SPARC_VADDRS_H
+
+#include <asm/head.h>
+
+/*
+ * asm-sparc/vaddrs.h: Here we define the virtual addresses at
+ * which important things will be mapped.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
+ */
+
+#define SRMMU_MAXMEM 0x0c000000
+
+#define SRMMU_NOCACHE_VADDR (KERNBASE + SRMMU_MAXMEM)
+ /* = 0x0fc000000 */
+/* XXX Empiricals - this needs to go away - KMW */
+#define SRMMU_MIN_NOCACHE_PAGES (550)
+#define SRMMU_MAX_NOCACHE_PAGES (1280)
+
+/* The following constant is used in mm/srmmu.c::srmmu_nocache_calcsize()
+ * to determine the amount of memory that will be reserved as nocache:
+ *
+ * 256 pages will be taken as nocache per each
+ * SRMMU_NOCACHE_ALCRATIO MB of system memory.
+ *
+ * limits enforced: nocache minimum = 256 pages
+ * nocache maximum = 1280 pages
+ */
+#define SRMMU_NOCACHE_ALCRATIO 64 /* 256 pages per 64MB of system RAM */
+
+#define SUN4M_IOBASE_VADDR 0xfd000000 /* Base for mapping pages */
+#define IOBASE_VADDR 0xfe000000
+#define IOBASE_END 0xfe600000
+
+#define VMALLOC_START 0xfe600000
+
+/* XXX Alter this when I get around to fixing sun4c - Anton */
+#define VMALLOC_END 0xffc00000
+
+/*
+ * On the sun4/4c we need a place
+ * to reliably map locked down kernel data. This includes the
+ * task_struct and kernel stack pages of each process plus the
+ * scsi buffers during dvma IO transfers, also the floppy buffers
+ * during pseudo dma which runs with traps off (no faults allowed).
+ * Some quick calculations yield:
+ * NR_TASKS <512> * (3 * PAGE_SIZE) == 0x600000
+ * Subtract this from 0xc00000 and you get 0x927C0 of vm left
+ * over to map SCSI dvma + floppy pseudo-dma buffers. So be
+ * careful if you change NR_TASKS or else there won't be enough
+ * room for it all.
+ */
+#define SUN4C_LOCK_VADDR 0xff000000
+#define SUN4C_LOCK_END 0xffc00000
+
+#define KADB_DEBUGGER_BEGVM 0xffc00000 /* Where kern debugger is in virt-mem */
+#define KADB_DEBUGGER_ENDVM 0xffd00000
+#define DEBUG_FIRSTVADDR KADB_DEBUGGER_BEGVM
+#define DEBUG_LASTVADDR KADB_DEBUGGER_ENDVM
+
+#define LINUX_OPPROM_BEGVM 0xffd00000
+#define LINUX_OPPROM_ENDVM 0xfff00000
+
+#define DVMA_VADDR 0xfff00000 /* Base area of the DVMA on suns */
+#define DVMA_END 0xfffc0000
+
+#endif /* !(_SPARC_VADDRS_H) */
diff --git a/include/asm-sparc/vfc_ioctls.h b/include/asm-sparc/vfc_ioctls.h
new file mode 100644
index 000000000000..af8b69007b22
--- /dev/null
+++ b/include/asm-sparc/vfc_ioctls.h
@@ -0,0 +1,58 @@
+/* Copyright (c) 1996 by Manish Vachharajani */
+
+#ifndef _LINUX_VFC_IOCTLS_H_
+#define _LINUX_VFC_IOCTLS_H_
+
+ /* IOCTLs */
+#define VFC_IOCTL(a) (('j' << 8) | a)
+#define VFCGCTRL (VFC_IOCTL (0)) /* get vfc attributes */
+#define VFCSCTRL (VFC_IOCTL (1)) /* set vfc attributes */
+#define VFCGVID (VFC_IOCTL (2)) /* get video decoder attributes */
+#define VFCSVID (VFC_IOCTL (3)) /* set video decoder attributes */
+#define VFCHUE (VFC_IOCTL (4)) /* set hue */
+#define VFCPORTCHG (VFC_IOCTL (5)) /* change port */
+#define VFCRDINFO (VFC_IOCTL (6)) /* read info */
+
+ /* Options for setting the vfc attributes and status */
+#define MEMPRST 0x1 /* reset FIFO ptr. */
+#define CAPTRCMD 0x2 /* start capture and wait */
+#define DIAGMODE 0x3 /* diag mode */
+#define NORMMODE 0x4 /* normal mode */
+#define CAPTRSTR 0x5 /* start capture */
+#define CAPTRWAIT 0x6 /* wait for capture to finish */
+
+
+ /* Options for the decoder */
+#define STD_NTSC 0x1 /* NTSC mode */
+#define STD_PAL 0x2 /* PAL mode */
+#define COLOR_ON 0x3 /* force color ON */
+#define MONO 0x4 /* force color OFF */
+
+ /* Values returned by ioctl 2 */
+
+#define NO_LOCK 1
+#define NTSC_COLOR 2
+#define NTSC_NOCOLOR 3
+#define PAL_COLOR 4
+#define PAL_NOCOLOR 5
+
+/* Not too sure what this does yet */
+ /* Options for setting Field number */
+#define ODD_FIELD 0x1
+#define EVEN_FIELD 0x0
+#define ACTIVE_ONLY 0x2
+#define NON_ACTIVE 0x0
+
+/* Debug options */
+#define VFC_I2C_SEND 0
+#define VFC_I2C_RECV 1
+
+struct vfc_debug_inout
+{
+ unsigned long addr;
+ unsigned long ret;
+ unsigned long len;
+ unsigned char __user *buffer;
+};
+
+#endif /* _LINUX_VFC_IOCTLS_H_ */
diff --git a/include/asm-sparc/viking.h b/include/asm-sparc/viking.h
new file mode 100644
index 000000000000..7541da71b9d6
--- /dev/null
+++ b/include/asm-sparc/viking.h
@@ -0,0 +1,253 @@
+/* $Id: viking.h,v 1.19 1997/04/20 14:11:48 ecd Exp $
+ * viking.h: Defines specific to the GNU/Viking MBUS module.
+ * This is SRMMU stuff.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_VIKING_H
+#define _SPARC_VIKING_H
+
+#include <asm/asi.h>
+#include <asm/mxcc.h>
+#include <asm/pgtsrmmu.h>
+
+/* Bits in the SRMMU control register for GNU/Viking modules.
+ *
+ * -----------------------------------------------------------
+ * |impl-vers| RSV |TC|AC|SP|BM|PC|MBM|SB|IC|DC|PSO|RSV|NF|ME|
+ * -----------------------------------------------------------
+ * 31 24 23-17 16 15 14 13 12 11 10 9 8 7 6-2 1 0
+ *
+ * TC: Tablewalk Cacheable -- 0 = Twalks are not cacheable in E-cache
+ * 1 = Twalks are cacheable in E-cache
+ *
+ * GNU/Viking will only cache tablewalks in the E-cache (mxcc) if present
+ * and never caches them internally (or so states the docs). Therefore
+ * for machines lacking an E-cache (ie. in MBUS mode) this bit must
+ * remain cleared.
+ *
+ * AC: Alternate Cacheable -- 0 = Passthru physical accesses not cacheable
+ * 1 = Passthru physical accesses cacheable
+ *
+ * This indicates whether accesses are cacheable when no cachable bit
+ * is present in the pte when the processor is in boot-mode or the
+ * access does not need pte's for translation (ie. pass-thru ASI's).
+ * "Cachable" is only referring to E-cache (if present) and not the
+ * on chip split I/D caches of the GNU/Viking.
+ *
+ * SP: SnooP Enable -- 0 = bus snooping off, 1 = bus snooping on
+ *
+ * This enables snooping on the GNU/Viking bus. This must be on
+ * for the hardware cache consistency mechanisms of the GNU/Viking
+ * to work at all. On non-mxcc GNU/Viking modules the split I/D
+ * caches will snoop regardless of whether they are enabled, this
+ * takes care of the case where the I or D or both caches are turned
+ * off yet still contain valid data. Note also that this bit does
+ * not affect GNU/Viking store-buffer snoops, those happen if the
+ * store-buffer is enabled no matter what.
+ *
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ *
+ * This indicates whether the GNU/Viking is in boot-mode or not,
+ * if it is then all instruction fetch physical addresses are
+ * computed as 0xff0000000 + low 28 bits of requested address.
+ * GNU/Viking boot-mode does not affect data accesses. Also,
+ * in boot mode instruction accesses bypass the split on chip I/D
+ * caches, they may be cached by the GNU/MXCC if present and enabled.
+ *
+ * MBM: MBus Mode -- 0 = not in MBus mode, 1 = in MBus mode
+ *
+ * This indicated the GNU/Viking configuration present. If in
+ * MBUS mode, the GNU/Viking lacks a GNU/MXCC E-cache. If it is
+ * not then the GNU/Viking is on a module VBUS connected directly
+ * to a GNU/MXCC cache controller. The GNU/MXCC can be thus connected
+ * to either an GNU/MBUS (sun4m) or the packet-switched GNU/XBus (sun4d).
+ *
+ * SB: StoreBuffer enable -- 0 = store buffer off, 1 = store buffer on
+ *
+ * The GNU/Viking store buffer allows the chip to continue execution
+ * after a store even if the data cannot be placed in one of the
+ * caches during that cycle. If disabled, all stores operations
+ * occur synchronously.
+ *
+ * IC: Instruction Cache -- 0 = off, 1 = on
+ * DC: Data Cache -- 0 = off, 1 = 0n
+ *
+ * These bits enable the on-cpu GNU/Viking split I/D caches. Note,
+ * as mentioned above, these caches will snoop the bus in GNU/MBUS
+ * configurations even when disabled to avoid data corruption.
+ *
+ * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
+ * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
+ *
+ */
+
+#define VIKING_MMUENABLE 0x00000001
+#define VIKING_NOFAULT 0x00000002
+#define VIKING_PSO 0x00000080
+#define VIKING_DCENABLE 0x00000100 /* Enable data cache */
+#define VIKING_ICENABLE 0x00000200 /* Enable instruction cache */
+#define VIKING_SBENABLE 0x00000400 /* Enable store buffer */
+#define VIKING_MMODE 0x00000800 /* MBUS mode */
+#define VIKING_PCENABLE 0x00001000 /* Enable parity checking */
+#define VIKING_BMODE 0x00002000
+#define VIKING_SPENABLE 0x00004000 /* Enable bus cache snooping */
+#define VIKING_ACENABLE 0x00008000 /* Enable alternate caching */
+#define VIKING_TCENABLE 0x00010000 /* Enable table-walks to be cached */
+#define VIKING_DPENABLE 0x00040000 /* Enable the data prefetcher */
+
+/*
+ * GNU/Viking Breakpoint Action Register fields.
+ */
+#define VIKING_ACTION_MIX 0x00001000 /* Enable multiple instructions */
+
+/*
+ * GNU/Viking Cache Tags.
+ */
+#define VIKING_PTAG_VALID 0x01000000 /* Cache block is valid */
+#define VIKING_PTAG_DIRTY 0x00010000 /* Block has been modified */
+#define VIKING_PTAG_SHARED 0x00000100 /* Shared with some other cache */
+
+#ifndef __ASSEMBLY__
+
+static inline void viking_flush_icache(void)
+{
+ __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+ : /* no outputs */
+ : "i" (ASI_M_IC_FLCLEAR)
+ : "memory");
+}
+
+static inline void viking_flush_dcache(void)
+{
+ __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+ : /* no outputs */
+ : "i" (ASI_M_DC_FLCLEAR)
+ : "memory");
+}
+
+static inline void viking_unlock_icache(void)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" (0x80000000), "i" (ASI_M_IC_FLCLEAR)
+ : "memory");
+}
+
+static inline void viking_unlock_dcache(void)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+ : /* no outputs */
+ : "r" (0x80000000), "i" (ASI_M_DC_FLCLEAR)
+ : "memory");
+}
+
+static inline void viking_set_bpreg(unsigned long regval)
+{
+ __asm__ __volatile__("sta %0, [%%g0] %1\n\t"
+ : /* no outputs */
+ : "r" (regval), "i" (ASI_M_ACTION)
+ : "memory");
+}
+
+static inline unsigned long viking_get_bpreg(void)
+{
+ unsigned long regval;
+
+ __asm__ __volatile__("lda [%%g0] %1, %0\n\t"
+ : "=r" (regval)
+ : "i" (ASI_M_ACTION));
+ return regval;
+}
+
+static inline void viking_get_dcache_ptag(int set, int block,
+ unsigned long *data)
+{
+ unsigned long ptag = ((set & 0x7f) << 5) | ((block & 0x3) << 26) |
+ 0x80000000;
+ unsigned long info, page;
+
+ __asm__ __volatile__ ("ldda [%2] %3, %%g2\n\t"
+ "or %%g0, %%g2, %0\n\t"
+ "or %%g0, %%g3, %1\n\t"
+ : "=r" (info), "=r" (page)
+ : "r" (ptag), "i" (ASI_M_DATAC_TAG)
+ : "g2", "g3");
+ data[0] = info;
+ data[1] = page;
+}
+
+static inline void viking_mxcc_turn_off_parity(unsigned long *mregp,
+ unsigned long *mxcc_cregp)
+{
+ unsigned long mreg = *mregp;
+ unsigned long mxcc_creg = *mxcc_cregp;
+
+ mreg &= ~(VIKING_PCENABLE);
+ mxcc_creg &= ~(MXCC_CTL_PARE);
+
+ __asm__ __volatile__ ("set 1f, %%g2\n\t"
+ "andcc %%g2, 4, %%g0\n\t"
+ "bne 2f\n\t"
+ " nop\n"
+ "1:\n\t"
+ "sta %0, [%%g0] %3\n\t"
+ "sta %1, [%2] %4\n\t"
+ "b 1f\n\t"
+ " nop\n\t"
+ "nop\n"
+ "2:\n\t"
+ "sta %0, [%%g0] %3\n\t"
+ "sta %1, [%2] %4\n"
+ "1:\n\t"
+ : /* no output */
+ : "r" (mreg), "r" (mxcc_creg),
+ "r" (MXCC_CREG), "i" (ASI_M_MMUREGS),
+ "i" (ASI_M_MXCC)
+ : "g2", "memory", "cc");
+ *mregp = mreg;
+ *mxcc_cregp = mxcc_creg;
+}
+
+static inline unsigned long viking_hwprobe(unsigned long vaddr)
+{
+ unsigned long val;
+
+ vaddr &= PAGE_MASK;
+ /* Probe all MMU entries. */
+ __asm__ __volatile__("lda [%1] %2, %0\n\t"
+ : "=r" (val)
+ : "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
+ if (!val)
+ return 0;
+
+ /* Probe region. */
+ __asm__ __volatile__("lda [%1] %2, %0\n\t"
+ : "=r" (val)
+ : "r" (vaddr | 0x200), "i" (ASI_M_FLUSH_PROBE));
+ if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
+ vaddr &= ~SRMMU_PGDIR_MASK;
+ vaddr >>= PAGE_SHIFT;
+ return val | (vaddr << 8);
+ }
+
+ /* Probe segment. */
+ __asm__ __volatile__("lda [%1] %2, %0\n\t"
+ : "=r" (val)
+ : "r" (vaddr | 0x100), "i" (ASI_M_FLUSH_PROBE));
+ if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
+ vaddr &= ~SRMMU_REAL_PMD_MASK;
+ vaddr >>= PAGE_SHIFT;
+ return val | (vaddr << 8);
+ }
+
+ /* Probe page. */
+ __asm__ __volatile__("lda [%1] %2, %0\n\t"
+ : "=r" (val)
+ : "r" (vaddr), "i" (ASI_M_FLUSH_PROBE));
+ return val;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_VIKING_H) */
diff --git a/include/asm-sparc/vuid_event.h b/include/asm-sparc/vuid_event.h
new file mode 100644
index 000000000000..7781e9f2fdd3
--- /dev/null
+++ b/include/asm-sparc/vuid_event.h
@@ -0,0 +1,41 @@
+/* SunOS Virtual User Input Device (VUID) compatibility */
+
+
+typedef struct firm_event {
+ unsigned short id; /* tag for this event */
+ unsigned char pair_type; /* unused by X11 */
+ unsigned char pair; /* unused by X11 */
+ int value; /* VKEY_UP, VKEY_DOWN or delta */
+ struct timeval time;
+} Firm_event;
+
+enum {
+ FE_PAIR_NONE,
+ FE_PAIR_SET,
+ FE_PAIR_DELTA,
+ FE_PAIR_ABSOLUTE
+};
+
+/* VUID stream formats */
+#define VUID_NATIVE 0 /* Native byte stream format */
+#define VUID_FIRM_EVENT 1 /* send firm_event structures */
+
+/* ioctls */
+ /* Set input device byte stream format (any of VUID_{NATIVE,FIRM_EVENT}) */
+#define VUIDSFORMAT _IOW('v', 1, int)
+ /* Retrieve input device byte stream format */
+#define VUIDGFORMAT _IOR('v', 2, int)
+
+/* Possible tag values */
+/* mouse buttons: */
+#define MS_LEFT 0x7f20
+#define MS_MIDDLE 0x7f21
+#define MS_RIGHT 0x7f22
+/* motion: */
+#define LOC_X_DELTA 0x7f80
+#define LOC_Y_DELTA 0x7f81
+#define LOC_X_ABSOLUTE 0x7f82 /* X compat, unsupported */
+#define LOC_Y_ABSOLUTE 0x7f83 /* X compat, unsupported */
+
+#define VKEY_UP 0
+#define VKEY_DOWN 1
diff --git a/include/asm-sparc/winmacro.h b/include/asm-sparc/winmacro.h
new file mode 100644
index 000000000000..557257eef3f9
--- /dev/null
+++ b/include/asm-sparc/winmacro.h
@@ -0,0 +1,136 @@
+/* $Id: winmacro.h,v 1.22 2000/05/09 17:40:15 davem Exp $
+ * winmacro.h: Window loading-unloading macros.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_WINMACRO_H
+#define _SPARC_WINMACRO_H
+
+#include <linux/config.h>
+#include <asm/ptrace.h>
+
+/* Store the register window onto the 8-byte aligned area starting
+ * at %reg. It might be %sp, it might not, we don't care.
+ */
+#define STORE_WINDOW(reg) \
+ std %l0, [%reg + RW_L0]; \
+ std %l2, [%reg + RW_L2]; \
+ std %l4, [%reg + RW_L4]; \
+ std %l6, [%reg + RW_L6]; \
+ std %i0, [%reg + RW_I0]; \
+ std %i2, [%reg + RW_I2]; \
+ std %i4, [%reg + RW_I4]; \
+ std %i6, [%reg + RW_I6];
+
+/* Load a register window from the area beginning at %reg. */
+#define LOAD_WINDOW(reg) \
+ ldd [%reg + RW_L0], %l0; \
+ ldd [%reg + RW_L2], %l2; \
+ ldd [%reg + RW_L4], %l4; \
+ ldd [%reg + RW_L6], %l6; \
+ ldd [%reg + RW_I0], %i0; \
+ ldd [%reg + RW_I2], %i2; \
+ ldd [%reg + RW_I4], %i4; \
+ ldd [%reg + RW_I6], %i6;
+
+/* Loading and storing struct pt_reg trap frames. */
+#define LOAD_PT_INS(base_reg) \
+ ldd [%base_reg + STACKFRAME_SZ + PT_I0], %i0; \
+ ldd [%base_reg + STACKFRAME_SZ + PT_I2], %i2; \
+ ldd [%base_reg + STACKFRAME_SZ + PT_I4], %i4; \
+ ldd [%base_reg + STACKFRAME_SZ + PT_I6], %i6;
+
+#define LOAD_PT_GLOBALS(base_reg) \
+ ld [%base_reg + STACKFRAME_SZ + PT_G1], %g1; \
+ ldd [%base_reg + STACKFRAME_SZ + PT_G2], %g2; \
+ ldd [%base_reg + STACKFRAME_SZ + PT_G4], %g4; \
+ ldd [%base_reg + STACKFRAME_SZ + PT_G6], %g6;
+
+#define LOAD_PT_YREG(base_reg, scratch) \
+ ld [%base_reg + STACKFRAME_SZ + PT_Y], %scratch; \
+ wr %scratch, 0x0, %y;
+
+#define LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
+ ld [%base_reg + STACKFRAME_SZ + PT_PSR], %pt_psr; \
+ ld [%base_reg + STACKFRAME_SZ + PT_PC], %pt_pc; \
+ ld [%base_reg + STACKFRAME_SZ + PT_NPC], %pt_npc;
+
+#define LOAD_PT_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \
+ LOAD_PT_YREG(base_reg, scratch) \
+ LOAD_PT_INS(base_reg) \
+ LOAD_PT_GLOBALS(base_reg) \
+ LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc)
+
+#define STORE_PT_INS(base_reg) \
+ std %i0, [%base_reg + STACKFRAME_SZ + PT_I0]; \
+ std %i2, [%base_reg + STACKFRAME_SZ + PT_I2]; \
+ std %i4, [%base_reg + STACKFRAME_SZ + PT_I4]; \
+ std %i6, [%base_reg + STACKFRAME_SZ + PT_I6];
+
+#define STORE_PT_GLOBALS(base_reg) \
+ st %g1, [%base_reg + STACKFRAME_SZ + PT_G1]; \
+ std %g2, [%base_reg + STACKFRAME_SZ + PT_G2]; \
+ std %g4, [%base_reg + STACKFRAME_SZ + PT_G4]; \
+ std %g6, [%base_reg + STACKFRAME_SZ + PT_G6];
+
+#define STORE_PT_YREG(base_reg, scratch) \
+ rd %y, %scratch; \
+ st %scratch, [%base_reg + STACKFRAME_SZ + PT_Y];
+
+#define STORE_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
+ st %pt_psr, [%base_reg + STACKFRAME_SZ + PT_PSR]; \
+ st %pt_pc, [%base_reg + STACKFRAME_SZ + PT_PC]; \
+ st %pt_npc, [%base_reg + STACKFRAME_SZ + PT_NPC];
+
+#define STORE_PT_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \
+ STORE_PT_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \
+ STORE_PT_GLOBALS(base_reg) \
+ STORE_PT_YREG(base_reg, g_scratch) \
+ STORE_PT_INS(base_reg)
+
+#define SAVE_BOLIXED_USER_STACK(cur_reg, scratch) \
+ ld [%cur_reg + TI_W_SAVED], %scratch; \
+ sll %scratch, 2, %scratch; \
+ add %scratch, %cur_reg, %scratch; \
+ st %sp, [%scratch + TI_RWIN_SPTRS]; \
+ sub %scratch, %cur_reg, %scratch; \
+ sll %scratch, 4, %scratch; \
+ add %scratch, %cur_reg, %scratch; \
+ STORE_WINDOW(scratch + TI_REG_WINDOW); \
+ sub %scratch, %cur_reg, %scratch; \
+ srl %scratch, 6, %scratch; \
+ add %scratch, 1, %scratch; \
+ st %scratch, [%cur_reg + TI_W_SAVED];
+
+#ifdef CONFIG_SMP
+#define LOAD_CURRENT4M(dest_reg, idreg) \
+ rd %tbr, %idreg; \
+ sethi %hi(current_set), %dest_reg; \
+ srl %idreg, 10, %idreg; \
+ or %dest_reg, %lo(current_set), %dest_reg; \
+ and %idreg, 0xc, %idreg; \
+ ld [%idreg + %dest_reg], %dest_reg;
+
+#define LOAD_CURRENT4D(dest_reg, idreg) \
+ lda [%g0] ASI_M_VIKING_TMP1, %idreg; \
+ sethi %hi(C_LABEL(current_set)), %dest_reg; \
+ sll %idreg, 2, %idreg; \
+ or %dest_reg, %lo(C_LABEL(current_set)), %dest_reg; \
+ ld [%idreg + %dest_reg], %dest_reg;
+
+/* Blackbox - take care with this... - check smp4m and smp4d before changing this. */
+#define LOAD_CURRENT(dest_reg, idreg) \
+ sethi %hi(___b_load_current), %idreg; \
+ sethi %hi(current_set), %dest_reg; \
+ sethi %hi(boot_cpu_id4), %idreg; \
+ or %dest_reg, %lo(current_set), %dest_reg; \
+ ldub [%idreg + %lo(boot_cpu_id4)], %idreg; \
+ ld [%idreg + %dest_reg], %dest_reg;
+#else
+#define LOAD_CURRENT(dest_reg, idreg) \
+ sethi %hi(current_set), %idreg; \
+ ld [%idreg + %lo(current_set)], %dest_reg;
+#endif
+
+#endif /* !(_SPARC_WINMACRO_H) */
diff --git a/include/asm-sparc/xor.h b/include/asm-sparc/xor.h
new file mode 100644
index 000000000000..f34b2cfa8206
--- /dev/null
+++ b/include/asm-sparc/xor.h
@@ -0,0 +1,269 @@
+/*
+ * include/asm-sparc/xor.h
+ *
+ * Optimized RAID-5 checksumming functions for 32-bit Sparc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * High speed xor_block operation for RAID4/5 utilizing the
+ * ldd/std SPARC instructions.
+ *
+ * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+static void
+sparc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+ int lines = bytes / (sizeof (long)) / 8;
+
+ do {
+ __asm__ __volatile__(
+ "ldd [%0 + 0x00], %%g2\n\t"
+ "ldd [%0 + 0x08], %%g4\n\t"
+ "ldd [%0 + 0x10], %%o0\n\t"
+ "ldd [%0 + 0x18], %%o2\n\t"
+ "ldd [%1 + 0x00], %%o4\n\t"
+ "ldd [%1 + 0x08], %%l0\n\t"
+ "ldd [%1 + 0x10], %%l2\n\t"
+ "ldd [%1 + 0x18], %%l4\n\t"
+ "xor %%g2, %%o4, %%g2\n\t"
+ "xor %%g3, %%o5, %%g3\n\t"
+ "xor %%g4, %%l0, %%g4\n\t"
+ "xor %%g5, %%l1, %%g5\n\t"
+ "xor %%o0, %%l2, %%o0\n\t"
+ "xor %%o1, %%l3, %%o1\n\t"
+ "xor %%o2, %%l4, %%o2\n\t"
+ "xor %%o3, %%l5, %%o3\n\t"
+ "std %%g2, [%0 + 0x00]\n\t"
+ "std %%g4, [%0 + 0x08]\n\t"
+ "std %%o0, [%0 + 0x10]\n\t"
+ "std %%o2, [%0 + 0x18]\n"
+ :
+ : "r" (p1), "r" (p2)
+ : "g2", "g3", "g4", "g5",
+ "o0", "o1", "o2", "o3", "o4", "o5",
+ "l0", "l1", "l2", "l3", "l4", "l5");
+ p1 += 8;
+ p2 += 8;
+ } while (--lines > 0);
+}
+
+static void
+sparc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+ unsigned long *p3)
+{
+ int lines = bytes / (sizeof (long)) / 8;
+
+ do {
+ __asm__ __volatile__(
+ "ldd [%0 + 0x00], %%g2\n\t"
+ "ldd [%0 + 0x08], %%g4\n\t"
+ "ldd [%0 + 0x10], %%o0\n\t"
+ "ldd [%0 + 0x18], %%o2\n\t"
+ "ldd [%1 + 0x00], %%o4\n\t"
+ "ldd [%1 + 0x08], %%l0\n\t"
+ "ldd [%1 + 0x10], %%l2\n\t"
+ "ldd [%1 + 0x18], %%l4\n\t"
+ "xor %%g2, %%o4, %%g2\n\t"
+ "xor %%g3, %%o5, %%g3\n\t"
+ "ldd [%2 + 0x00], %%o4\n\t"
+ "xor %%g4, %%l0, %%g4\n\t"
+ "xor %%g5, %%l1, %%g5\n\t"
+ "ldd [%2 + 0x08], %%l0\n\t"
+ "xor %%o0, %%l2, %%o0\n\t"
+ "xor %%o1, %%l3, %%o1\n\t"
+ "ldd [%2 + 0x10], %%l2\n\t"
+ "xor %%o2, %%l4, %%o2\n\t"
+ "xor %%o3, %%l5, %%o3\n\t"
+ "ldd [%2 + 0x18], %%l4\n\t"
+ "xor %%g2, %%o4, %%g2\n\t"
+ "xor %%g3, %%o5, %%g3\n\t"
+ "xor %%g4, %%l0, %%g4\n\t"
+ "xor %%g5, %%l1, %%g5\n\t"
+ "xor %%o0, %%l2, %%o0\n\t"
+ "xor %%o1, %%l3, %%o1\n\t"
+ "xor %%o2, %%l4, %%o2\n\t"
+ "xor %%o3, %%l5, %%o3\n\t"
+ "std %%g2, [%0 + 0x00]\n\t"
+ "std %%g4, [%0 + 0x08]\n\t"
+ "std %%o0, [%0 + 0x10]\n\t"
+ "std %%o2, [%0 + 0x18]\n"
+ :
+ : "r" (p1), "r" (p2), "r" (p3)
+ : "g2", "g3", "g4", "g5",
+ "o0", "o1", "o2", "o3", "o4", "o5",
+ "l0", "l1", "l2", "l3", "l4", "l5");
+ p1 += 8;
+ p2 += 8;
+ p3 += 8;
+ } while (--lines > 0);
+}
+
+static void
+sparc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+ unsigned long *p3, unsigned long *p4)
+{
+ int lines = bytes / (sizeof (long)) / 8;
+
+ do {
+ __asm__ __volatile__(
+ "ldd [%0 + 0x00], %%g2\n\t"
+ "ldd [%0 + 0x08], %%g4\n\t"
+ "ldd [%0 + 0x10], %%o0\n\t"
+ "ldd [%0 + 0x18], %%o2\n\t"
+ "ldd [%1 + 0x00], %%o4\n\t"
+ "ldd [%1 + 0x08], %%l0\n\t"
+ "ldd [%1 + 0x10], %%l2\n\t"
+ "ldd [%1 + 0x18], %%l4\n\t"
+ "xor %%g2, %%o4, %%g2\n\t"
+ "xor %%g3, %%o5, %%g3\n\t"
+ "ldd [%2 + 0x00], %%o4\n\t"
+ "xor %%g4, %%l0, %%g4\n\t"
+ "xor %%g5, %%l1, %%g5\n\t"
+ "ldd [%2 + 0x08], %%l0\n\t"
+ "xor %%o0, %%l2, %%o0\n\t"
+ "xor %%o1, %%l3, %%o1\n\t"
+ "ldd [%2 + 0x10], %%l2\n\t"
+ "xor %%o2, %%l4, %%o2\n\t"
+ "xor %%o3, %%l5, %%o3\n\t"
+ "ldd [%2 + 0x18], %%l4\n\t"
+ "xor %%g2, %%o4, %%g2\n\t"
+ "xor %%g3, %%o5, %%g3\n\t"
+ "ldd [%3 + 0x00], %%o4\n\t"
+ "xor %%g4, %%l0, %%g4\n\t"
+ "xor %%g5, %%l1, %%g5\n\t"
+ "ldd [%3 + 0x08], %%l0\n\t"
+ "xor %%o0, %%l2, %%o0\n\t"
+ "xor %%o1, %%l3, %%o1\n\t"
+ "ldd [%3 + 0x10], %%l2\n\t"
+ "xor %%o2, %%l4, %%o2\n\t"
+ "xor %%o3, %%l5, %%o3\n\t"
+ "ldd [%3 + 0x18], %%l4\n\t"
+ "xor %%g2, %%o4, %%g2\n\t"
+ "xor %%g3, %%o5, %%g3\n\t"
+ "xor %%g4, %%l0, %%g4\n\t"
+ "xor %%g5, %%l1, %%g5\n\t"
+ "xor %%o0, %%l2, %%o0\n\t"
+ "xor %%o1, %%l3, %%o1\n\t"
+ "xor %%o2, %%l4, %%o2\n\t"
+ "xor %%o3, %%l5, %%o3\n\t"
+ "std %%g2, [%0 + 0x00]\n\t"
+ "std %%g4, [%0 + 0x08]\n\t"
+ "std %%o0, [%0 + 0x10]\n\t"
+ "std %%o2, [%0 + 0x18]\n"
+ :
+ : "r" (p1), "r" (p2), "r" (p3), "r" (p4)
+ : "g2", "g3", "g4", "g5",
+ "o0", "o1", "o2", "o3", "o4", "o5",
+ "l0", "l1", "l2", "l3", "l4", "l5");
+ p1 += 8;
+ p2 += 8;
+ p3 += 8;
+ p4 += 8;
+ } while (--lines > 0);
+}
+
+static void
+sparc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+ unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+ int lines = bytes / (sizeof (long)) / 8;
+
+ do {
+ __asm__ __volatile__(
+ "ldd [%0 + 0x00], %%g2\n\t"
+ "ldd [%0 + 0x08], %%g4\n\t"
+ "ldd [%0 + 0x10], %%o0\n\t"
+ "ldd [%0 + 0x18], %%o2\n\t"
+ "ldd [%1 + 0x00], %%o4\n\t"
+ "ldd [%1 + 0x08], %%l0\n\t"
+ "ldd [%1 + 0x10], %%l2\n\t"
+ "ldd [%1 + 0x18], %%l4\n\t"
+ "xor %%g2, %%o4, %%g2\n\t"
+ "xor %%g3, %%o5, %%g3\n\t"
+ "ldd [%2 + 0x00], %%o4\n\t"
+ "xor %%g4, %%l0, %%g4\n\t"
+ "xor %%g5, %%l1, %%g5\n\t"
+ "ldd [%2 + 0x08], %%l0\n\t"
+ "xor %%o0, %%l2, %%o0\n\t"
+ "xor %%o1, %%l3, %%o1\n\t"
+ "ldd [%2 + 0x10], %%l2\n\t"
+ "xor %%o2, %%l4, %%o2\n\t"
+ "xor %%o3, %%l5, %%o3\n\t"
+ "ldd [%2 + 0x18], %%l4\n\t"
+ "xor %%g2, %%o4, %%g2\n\t"
+ "xor %%g3, %%o5, %%g3\n\t"
+ "ldd [%3 + 0x00], %%o4\n\t"
+ "xor %%g4, %%l0, %%g4\n\t"
+ "xor %%g5, %%l1, %%g5\n\t"
+ "ldd [%3 + 0x08], %%l0\n\t"
+ "xor %%o0, %%l2, %%o0\n\t"
+ "xor %%o1, %%l3, %%o1\n\t"
+ "ldd [%3 + 0x10], %%l2\n\t"
+ "xor %%o2, %%l4, %%o2\n\t"
+ "xor %%o3, %%l5, %%o3\n\t"
+ "ldd [%3 + 0x18], %%l4\n\t"
+ "xor %%g2, %%o4, %%g2\n\t"
+ "xor %%g3, %%o5, %%g3\n\t"
+ "ldd [%4 + 0x00], %%o4\n\t"
+ "xor %%g4, %%l0, %%g4\n\t"
+ "xor %%g5, %%l1, %%g5\n\t"
+ "ldd [%4 + 0x08], %%l0\n\t"
+ "xor %%o0, %%l2, %%o0\n\t"
+ "xor %%o1, %%l3, %%o1\n\t"
+ "ldd [%4 + 0x10], %%l2\n\t"
+ "xor %%o2, %%l4, %%o2\n\t"
+ "xor %%o3, %%l5, %%o3\n\t"
+ "ldd [%4 + 0x18], %%l4\n\t"
+ "xor %%g2, %%o4, %%g2\n\t"
+ "xor %%g3, %%o5, %%g3\n\t"
+ "xor %%g4, %%l0, %%g4\n\t"
+ "xor %%g5, %%l1, %%g5\n\t"
+ "xor %%o0, %%l2, %%o0\n\t"
+ "xor %%o1, %%l3, %%o1\n\t"
+ "xor %%o2, %%l4, %%o2\n\t"
+ "xor %%o3, %%l5, %%o3\n\t"
+ "std %%g2, [%0 + 0x00]\n\t"
+ "std %%g4, [%0 + 0x08]\n\t"
+ "std %%o0, [%0 + 0x10]\n\t"
+ "std %%o2, [%0 + 0x18]\n"
+ :
+ : "r" (p1), "r" (p2), "r" (p3), "r" (p4), "r" (p5)
+ : "g2", "g3", "g4", "g5",
+ "o0", "o1", "o2", "o3", "o4", "o5",
+ "l0", "l1", "l2", "l3", "l4", "l5");
+ p1 += 8;
+ p2 += 8;
+ p3 += 8;
+ p4 += 8;
+ p5 += 8;
+ } while (--lines > 0);
+}
+
+static struct xor_block_template xor_block_SPARC = {
+ .name = "SPARC",
+ .do_2 = sparc_2,
+ .do_3 = sparc_3,
+ .do_4 = sparc_4,
+ .do_5 = sparc_5,
+};
+
+/* For grins, also test the generic routines. */
+#include <asm-generic/xor.h>
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES \
+ do { \
+ xor_speed(&xor_block_8regs); \
+ xor_speed(&xor_block_32regs); \
+ xor_speed(&xor_block_SPARC); \
+ } while (0)