diff options
Diffstat (limited to 'arch/arm64/boot/dts/amlogic')
21 files changed, 471 insertions, 25 deletions
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index 998f5050795c..2ad1f8eef199 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -81,6 +81,12 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + watchdog@2100 { + compatible = "amlogic,c3-wdt", "amlogic,t7-wdt"; + reg = <0x0 0x2100 0x0 0x10>; + clocks = <&xtal>; + }; + periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,c3-periphs-pinctrl"; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts index 0062667c4f65..8a18ce948450 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts @@ -30,8 +30,20 @@ &uart_B { bluetooth { compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>; }; }; + +&i2c_AO { + /* EEPROM on base board */ + eeprompd: eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + pagesize = <0x20>; + label = "eeprompd"; + address-width = <0x10>; + vcc-supply = <&vddao_3v3>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts index c2d22b00c1cd..c356bd2cc63a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts @@ -25,3 +25,15 @@ &sd_emmc_b { broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/ }; + +&i2c_AO { + /* EEPROM on base board */ + eeprompd: eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + pagesize = <0x20>; + label = "eeprompd"; + address-width = <0x10>; + vcc-supply = <&vddao_3v3>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index df16eead2c80..c8905663bc75 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -66,7 +66,6 @@ VDDA-supply = <&vcc_3v3>; VDDP-supply = <&vcc_3v3>; VDDD-supply = <&vcc_3v3>; - status = "okay"; sound-name-prefix = "Linein"; }; @@ -75,14 +74,12 @@ compatible = "everest,es7154"; VDD-supply = <&vcc_3v3>; PVDD-supply = <&vcc_5v>; - status = "okay"; sound-name-prefix = "Lineout"; }; spdif_dit: audio-codec-2 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; @@ -91,14 +88,12 @@ compatible = "dmic-codec"; num-channels = <7>; wakeup-delay-ms = <50>; - status = "okay"; sound-name-prefix = "MIC"; }; spdif_dir: audio-codec-4 { #sound-dai-cells = <0>; compatible = "linux,spdif-dir"; - status = "okay"; sound-name-prefix = "DIR"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index a49aa62e3f9f..7e5ac9db93f8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -432,6 +432,27 @@ }; }; + nand_all_pins: nand-all-pins { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "nand_ce0", + "nand_ale", + "nand_cle", + "nand_wen_clk", + "nand_ren_wr"; + function = "nand"; + input-enable; + bias-pull-up; + }; + }; + emmc_ds_pins: emmc_ds { mux { groups = "emmc_ds"; @@ -1913,6 +1934,8 @@ reg = <0x0 0x7800 0x0 0x100>, <0x0 0x7000 0x0 0x800>; reg-names = "nfc", "emmc"; + pinctrl-0 = <&nand_all_pins>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index 0ad0c2b7dfef..4c4550dd4711 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -45,7 +45,6 @@ compatible = "dmic-codec"; num-channels = <2>; wakeup-delay-ms = <50>; - status = "okay"; sound-name-prefix = "MIC"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 4969a76460fa..9b55982b6a6b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -22,7 +22,6 @@ spdif_dit: audio-codec-1 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi index 995ce10d5c81..08c33ec7e9f1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi @@ -369,7 +369,7 @@ bluetooth { compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi index 0a6a12808568..4b8db872bbf3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi @@ -487,7 +487,7 @@ bluetooth { compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts index 8fc2e143cb54..0da386cabe1a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts @@ -22,7 +22,6 @@ spdif_dit: audio-codec-1 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts index ce548b373296..6396f190d703 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts @@ -17,7 +17,6 @@ spdif_dit: audio-codec-1 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 18f7b730289e..e59c3c92b1e7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -26,7 +26,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts index e238f1f10124..f28452b9f00f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts @@ -18,7 +18,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 292c718ee19c..591455c50e88 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -18,7 +18,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index e8303089bff6..74df32534231 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -21,7 +21,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index e1b74b174915..376760d86766 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -17,7 +17,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 7d525bdb0e06..ad2dd4ad0a31 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -28,7 +28,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index 50d49aec41bd..d05dde8da5c5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -37,7 +37,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts index c1f322c73982..983caddc409c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts @@ -15,7 +15,7 @@ #size-cells = <2>; aliases { - serial0 = &uart_B; + serial0 = &uart_b; }; memory@0 { @@ -23,9 +23,20 @@ reg = <0x0 0x0 0x0 0x40000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 52 MiB reserved for ARM Trusted Firmware */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x3400000>; + no-map; + }; + }; }; -&uart_B { +&uart_b { status = "okay"; }; @@ -34,3 +45,48 @@ pinctrl-0 = <&remote_pins>; pinctrl-names = "default"; }; + +&nand { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + nand-on-flash-bbt; + + partition@0 { + label = "boot"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "env"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "system"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "media"; + reg = <0x04000000 0x8000000>; + }; + }; +}; + +&spicc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spicc0_pins_x>; + cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index e0cfc54ebccb..ce90b35686a2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -6,6 +6,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-s4-gpio.h> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> +#include <dt-bindings/power/meson-s4-power.h> / { cpus { @@ -92,6 +96,44 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + clkc_periphs: clock-controller@0 { + compatible = "amlogic,s4-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x49c>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV2P5>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV4>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&clkc_pll CLKID_GP0_PLL>, + <&clkc_pll CLKID_MPLL0>, + <&clkc_pll CLKID_MPLL1>, + <&clkc_pll CLKID_MPLL2>, + <&clkc_pll CLKID_MPLL3>, + <&clkc_pll CLKID_HDMI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", + "fclk_div4", "fclk_div5", "fclk_div7", + "hifi_pll", "gp0_pll", "mpll0", "mpll1", + "mpll2", "mpll3", "hdmi_pll", "xtal"; + #clock-cells = <1>; + }; + + clkc_pll: clock-controller@8000 { + compatible = "amlogic,s4-pll-clkc"; + reg = <0x0 0x8000 0x0 0x1e8>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + + watchdog@2100 { + compatible = "amlogic,s4-wdt", "amlogic,t7-wdt"; + reg = <0x0 0x2100 0x0 0x10>; + clocks = <&xtal>; + }; + periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,meson-s4-periphs-pinctrl"; #address-cells = <2>; @@ -114,6 +156,187 @@ bias-disable; }; }; + + i2c0_pins1: i2c0-pins1 { + mux { + groups = "i2c0_sda", + "i2c0_scl"; + function = "i2c0"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins1: i2c1-pins1 { + mux { + groups = "i2c1_sda_c", + "i2c1_scl_c"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins2: i2c1-pins2 { + mux { + groups = "i2c1_sda_d", + "i2c1_scl_d"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins3: i2c1-pins3 { + mux { + groups = "i2c1_sda_h", + "i2c1_scl_h"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins4: i2c1-pins4 { + mux { + groups = "i2c1_sda_x", + "i2c1_scl_x"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins1: i2c2-pins1 { + mux { + groups = "i2c2_sda_d", + "i2c2_scl_d"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins2: i2c2-pins2 { + mux { + groups = "i2c2_sda_h8", + "i2c2_scl_h9"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins3: i2c2-pins3 { + mux { + groups = "i2c2_sda_h0", + "i2c2_scl_h1"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c3_pins1: i2c3-pins1 { + mux { + groups = "i2c3_sda_x", + "i2c3_scl_x"; + function = "i2c3"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c3_pins2: i2c3-pins2 { + mux { + groups = "i2c3_sda_z", + "i2c3_scl_z"; + function = "i2c3"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins1: i2c4-pins1 { + mux { + groups = "i2c4_sda_c", + "i2c4_scl_c"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins2: i2c4-pins2 { + mux { + groups = "i2c4_sda_d", + "i2c4_scl_d"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins3: i2c4-pins3 { + mux { + groups = "i2c4_sda_z", + "i2c4_scl_z"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + nand_pins: nand-pins { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "nand_ce0", + "nand_ale", + "nand_cle", + "nand_wen_clk", + "nand_ren_wr"; + function = "nand"; + input-enable; + }; + }; + + spicc0_pins_x: spicc0-pins_x { + mux { + groups = "spi_a_mosi_x", + "spi_a_miso_x", + "spi_a_clk_x"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins_h: spicc0-pins-h { + mux { + groups = "spi_a_mosi_h", + "spi_a_miso_h", + "spi_a_clk_h"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins_z: spicc0-pins-z { + mux { + groups = "spi_a_mosi_z", + "spi_a_miso_z", + "spi_a_clk_z"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + }; gpio_intc: interrupt-controller@4080 { @@ -126,14 +349,120 @@ <10 11 12 13 14 15 16 17 18 19 20 21>; }; - uart_B: serial@7a000 { + eth_phy: mdio-multiplexer@28000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x28000 0x0 0xa4>; + + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_ETHPHY>, + <&xtal>, + <&clkc_pll CLKID_MPLL_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet-phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; + }; + + spicc0: spi@50000 { + compatible = "amlogic,meson-g12a-spicc"; + reg = <0x0 0x50000 0x0 0x44>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc_periphs CLKID_SPICC0>, + <&clkc_periphs CLKID_SPICC0_EN>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@66000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x66000 0x0 0x20>; + interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_A>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@68000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x68000 0x0 0x20>; + interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_B>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@6a000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6a000 0x0 0x20>; + interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@6c000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6c000 0x0 0x20>; + interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_D>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@6e000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6e000 0x0 0x20>; + interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_E>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + nand: nand-controller@8c800 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>; + reg-names = "nfc", "emmc"; + interrupts = <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_SD_EMMC_C>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "device"; + status = "disabled"; + }; + + uart_b: serial@7a000 { compatible = "amlogic,meson-s4-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x7a000 0x0 0x18>; interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_periphs CLKID_UART_B>, <&xtal>; clock-names = "xtal", "pclk", "baud"; + status = "disabled"; }; reset: reset-controller@2000 { @@ -154,5 +483,30 @@ reg = <0x0 0x440788 0x0 0x0c>; }; }; + + ethmac: ethernet@fdc00000 { + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xfdc00000 0x0 0x10000>, + <0x0 0xfe024000 0x0 0x8>; + + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + power-domains = <&pwrc PWRC_S4_ETH_ID>; + clocks = <&clkc_periphs CLKID_ETH>, + <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + status = "disabled"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 095579c55f18..109932068dbe 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -32,7 +32,6 @@ compatible = "dmic-codec"; num-channels = <2>; wakeup-delay-ms = <50>; - status = "okay"; sound-name-prefix = "MIC"; }; |