diff options
Diffstat (limited to 'Documentation/userspace-api/media')
20 files changed, 101 insertions, 79 deletions
diff --git a/Documentation/userspace-api/media/cec/cec-api.rst b/Documentation/userspace-api/media/cec/cec-api.rst index 4d229ed8a1d9..578303d484f3 100644 --- a/Documentation/userspace-api/media/cec/cec-api.rst +++ b/Documentation/userspace-api/media/cec/cec-api.rst @@ -10,13 +10,8 @@ Part V - Consumer Electronics Control API This part describes the CEC: Consumer Electronics Control -.. only:: html - - .. class:: toc-title - - Table of Contents - .. toctree:: + :caption: Table of Contents :maxdepth: 5 :numbered: diff --git a/Documentation/userspace-api/media/drivers/index.rst b/Documentation/userspace-api/media/drivers/index.rst index 1726f8ec86fa..2252063593bf 100644 --- a/Documentation/userspace-api/media/drivers/index.rst +++ b/Documentation/userspace-api/media/drivers/index.rst @@ -21,13 +21,8 @@ more details. For more details see the file COPYING in the source distribution of Linux. -.. only:: html - - .. class:: toc-title - - Table of Contents - .. toctree:: + :caption: Table of Contents :maxdepth: 5 :numbered: @@ -41,4 +36,5 @@ For more details see the file COPYING in the source distribution of Linux. npcm-video omap3isp-uapi st-vgxy61 + thp7312 uvcvideo diff --git a/Documentation/userspace-api/media/drivers/thp7312.rst b/Documentation/userspace-api/media/drivers/thp7312.rst new file mode 100644 index 000000000000..7c777e6fb7d2 --- /dev/null +++ b/Documentation/userspace-api/media/drivers/thp7312.rst @@ -0,0 +1,39 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +THine THP7312 ISP driver +======================== + +The THP7312 driver implements the following driver-specific controls: + +``V4L2_CID_THP7312_LOW_LIGHT_COMPENSATION`` + Enable/Disable auto-adjustment, based on lighting conditions, of the frame + rate when auto-exposure is enabled. + +``V4L2_CID_THP7312_AUTO_FOCUS_METHOD`` + Set method of auto-focus. Only takes effect when auto-focus is enabled. + + .. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 4 + + * - ``0`` + - Contrast-based auto-focus + * - ``1`` + - PDAF + * - ``2`` + - Hybrid of contrast-based and PDAF + + Supported values for the control depend on the camera sensor module + connected to the THP7312. If the module doesn't have a focus lens actuator, + this control will not be exposed by the THP7312 driver. If the module has a + controllable focus lens but the sensor doesn't support PDAF, only the + contrast-based auto-focus value will be valid. Otherwise all values for the + controls will be supported. + +``V4L2_CID_THP7312_NOISE_REDUCTION_AUTO`` + Enable/Disable auto noise reduction. + +``V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE`` + Set the noise reduction strength, where 0 is the weakest and 10 is the + strongest. diff --git a/Documentation/userspace-api/media/dvb/dvbapi.rst b/Documentation/userspace-api/media/dvb/dvbapi.rst index 1dda69343f34..4ac0c1bc54ca 100644 --- a/Documentation/userspace-api/media/dvb/dvbapi.rst +++ b/Documentation/userspace-api/media/dvb/dvbapi.rst @@ -27,13 +27,8 @@ Part II - Digital TV API **Version 5.10** -.. only:: html - - .. class:: toc-title - - Table of Contents - .. toctree:: + :caption: Table of Contents :maxdepth: 5 :numbered: diff --git a/Documentation/userspace-api/media/index.rst b/Documentation/userspace-api/media/index.rst index d839904be085..337ef6c7c47f 100644 --- a/Documentation/userspace-api/media/index.rst +++ b/Documentation/userspace-api/media/index.rst @@ -21,13 +21,8 @@ Documentation/driver-api/media/index.rst media devices; -.. only:: html - - .. class:: toc-title - - Table of Contents - .. toctree:: + :caption: Table of Contents :maxdepth: 1 intro diff --git a/Documentation/userspace-api/media/mediactl/media-controller.rst b/Documentation/userspace-api/media/mediactl/media-controller.rst index 508dd693bf6c..73a87f82f92d 100644 --- a/Documentation/userspace-api/media/mediactl/media-controller.rst +++ b/Documentation/userspace-api/media/mediactl/media-controller.rst @@ -7,13 +7,8 @@ Part IV - Media Controller API ############################## -.. only:: html - - .. class:: toc-title - - Table of Contents - .. toctree:: + :caption: Table of Contents :maxdepth: 5 :numbered: diff --git a/Documentation/userspace-api/media/rc/remote_controllers.rst b/Documentation/userspace-api/media/rc/remote_controllers.rst index f89291838637..483f9ae92a90 100644 --- a/Documentation/userspace-api/media/rc/remote_controllers.rst +++ b/Documentation/userspace-api/media/rc/remote_controllers.rst @@ -7,13 +7,8 @@ Part III - Remote Controller API ################################ -.. only:: html - - .. class:: toc-title - - Table of Contents - .. toctree:: + :caption: Table of Contents :maxdepth: 5 :numbered: diff --git a/Documentation/userspace-api/media/v4l/v4l2.rst b/Documentation/userspace-api/media/v4l/v4l2.rst index ad7a2bf0cf26..cf8ae56a008c 100644 --- a/Documentation/userspace-api/media/v4l/v4l2.rst +++ b/Documentation/userspace-api/media/v4l/v4l2.rst @@ -11,13 +11,8 @@ This part describes the Video for Linux API version 2 (V4L2 API) specification. **Revision 4.5** -.. only:: html - - .. class:: toc-title - - Table of Contents - .. toctree:: + :caption: Table of Contents :numbered: :maxdepth: 5 diff --git a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst index a048a9f6b7b6..49232c9006c2 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst @@ -116,9 +116,13 @@ than the number requested. - ``flags`` - Specifies additional buffer management attributes. See :ref:`memory-flags`. - * - __u32 - - ``reserved``\ [6] + - ``max_num_buffers`` + - If the V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS capability flag is set + this field indicates the maximum possible number of buffers + for this queue. + * - __u32 + - ``reserved``\ [5] - A place holder for future extensions. Drivers and applications must set the array to zero. diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst index f9f73530a6be..4d56c0528ad7 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst @@ -295,6 +295,14 @@ still cause this situation. - ``p_av1_film_grain`` - A pointer to a struct :c:type:`v4l2_ctrl_av1_film_grain`. Valid if this control is of type ``V4L2_CTRL_TYPE_AV1_FILM_GRAIN``. + * - struct :c:type:`v4l2_ctrl_hdr10_cll_info` * + - ``p_hdr10_cll_info`` + - A pointer to a struct :c:type:`v4l2_ctrl_hdr10_cll_info`. Valid if this control is + of type ``V4L2_CTRL_TYPE_HDR10_CLL_INFO``. + * - struct :c:type:`v4l2_ctrl_hdr10_mastering_display` * + - ``p_hdr10_mastering_display`` + - A pointer to a struct :c:type:`v4l2_ctrl_hdr10_mastering_display`. Valid if this control is + of type ``V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY``. * - void * - ``ptr`` - A pointer to a compound type which can be an N-dimensional array diff --git a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst index 099fa6695167..0b3a41a45d05 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst @@ -120,6 +120,7 @@ aborting or finishing any DMA in progress, an implicit .. _V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS: .. _V4L2-BUF-CAP-SUPPORTS-M2M-HOLD-CAPTURE-BUF: .. _V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS: +.. _V4L2-BUF-CAP-SUPPORTS-MAX-NUM-BUFFERS: .. raw:: latex diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst index 8def4c05d3da..c935bacc3bc2 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst @@ -107,8 +107,7 @@ appropriately. The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. EINVAL - The struct - :c:type:`v4l2_subdev_frame_interval_enum` - ``pad`` references a non-existing pad, one of the ``code``, - ``width`` or ``height`` fields are invalid for the given pad or the - ``index`` field is out of bounds. + The struct :c:type:`v4l2_subdev_frame_interval_enum` ``pad`` references a + non-existing pad, the ``which`` field has an unsupported value, one of the + ``code``, ``width`` or ``height`` fields are invalid for the given pad, or + the ``index`` field is out of bounds. diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst index e3ae84df5486..65f0cfeca973 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst @@ -126,7 +126,6 @@ appropriately. The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. EINVAL - The struct - :c:type:`v4l2_subdev_frame_size_enum` - ``pad`` references a non-existing pad, the ``code`` is invalid for - the given pad or the ``index`` field is out of bounds. + The struct :c:type:`v4l2_subdev_frame_size_enum` ``pad`` references a + non-existing pad, the ``which`` field has an unsupported value, the ``code`` + is invalid for the given pad, or the ``index`` field is out of bounds. diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst index 4ad7dec27e25..3050966b199f 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst @@ -158,7 +158,6 @@ appropriately. The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. EINVAL - The struct - :c:type:`v4l2_subdev_mbus_code_enum` - ``pad`` references a non-existing pad, or the ``index`` field is out - of bounds. + The struct :c:type:`v4l2_subdev_mbus_code_enum` ``pad`` references a + non-existing pad, the ``which`` field has an unsupported value, or the + ``index`` field is out of bounds. diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst index 20f12a1cc0f7..810b6a859dc8 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst @@ -71,6 +71,11 @@ is unknown to the kernel. of 'stream' fields (referring to the stream number) with various ioctls. If this is not set (which is the default), the 'stream' fields will be forced to 0 by the kernel. + * - ``V4L2_SUBDEV_CLIENT_CAP_INTERVAL_USES_WHICH`` + - The client is aware of the :c:type:`v4l2_subdev_frame_interval` + ``which`` field. If this is not set (which is the default), the + ``which`` field is forced to ``V4L2_SUBDEV_FORMAT_ACTIVE`` by the + kernel. Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst index 1d267f7e7991..92d933631fda 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst @@ -118,10 +118,9 @@ EBUSY ``VIDIOC_SUBDEV_S_CROP`` EINVAL - The struct :c:type:`v4l2_subdev_crop` ``pad`` - references a non-existing pad, the ``which`` field references a - non-existing format, or cropping is not supported on the given - subdev pad. + The struct :c:type:`v4l2_subdev_crop` ``pad`` references a non-existing pad, + the ``which`` field has an unsupported value, or cropping is not supported + on the given subdev pad. EPERM The ``VIDIOC_SUBDEV_S_CROP`` ioctl has been called on a read-only subdevice diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst index ed253a1e44b7..4a2b4e4f0152 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst @@ -140,9 +140,8 @@ EBUSY fix the problem first. Only returned by ``VIDIOC_SUBDEV_S_FMT`` EINVAL - The struct :c:type:`v4l2_subdev_format` - ``pad`` references a non-existing pad, or the ``which`` field - references a non-existing format. + The struct :c:type:`v4l2_subdev_format` ``pad`` references a non-existing + pad, or the ``which`` field has an unsupported value. EPERM The ``VIDIOC_SUBDEV_S_FMT`` ioctl has been called on a read-only subdevice diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst index 842f962d2aea..c8022809ac35 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst @@ -58,8 +58,9 @@ struct contains the current frame interval as would be returned by a ``VIDIOC_SUBDEV_G_FRAME_INTERVAL`` call. -Calling ``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` on a subdev device node that has been -registered in read-only mode is not allowed. An error is returned and the errno +If the subdev device node has been registered in read-only mode, calls to +``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` are only valid if the ``which`` field is set +to ``V4L2_SUBDEV_FORMAT_TRY``, otherwise an error is returned and the errno variable is set to ``-EPERM``. Drivers must not return an error solely because the requested interval @@ -93,7 +94,11 @@ the same sub-device is not defined. - ``stream`` - Stream identifier. * - __u32 - - ``reserved``\ [8] + - ``which`` + - Active or try frame interval, from enum + :ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`. + * - __u32 + - ``reserved``\ [7] - Reserved for future extensions. Applications and drivers must set the array to zero. @@ -112,11 +117,10 @@ EBUSY ``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` EINVAL - The struct - :c:type:`v4l2_subdev_frame_interval` - ``pad`` references a non-existing pad, or the pad doesn't support - frame intervals. + The struct :c:type:`v4l2_subdev_frame_interval` ``pad`` references a + non-existing pad, the ``which`` field has an unsupported value, or the pad + doesn't support frame intervals. EPERM The ``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` ioctl has been called on a read-only - subdevice. + subdevice and the ``which`` field is set to ``V4L2_SUBDEV_FORMAT_ACTIVE``. diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst index 72677a280cd6..26b5004bfe6d 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst @@ -72,7 +72,7 @@ On a successful ``VIDIOC_SUBDEV_G_ROUTING`` call the driver updates the * - __u32 - ``which`` - - Format to modified, from enum + - Routing table to be accessed, from enum :ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`. * - struct :c:type:`v4l2_subdev_route` - ``routes[]`` @@ -140,8 +140,9 @@ ENOSPC all the available routes the subdevice exposes. EINVAL - The sink or source pad identifiers reference a non-existing pad, or reference - pads of different types (ie. the sink_pad identifiers refers to a source pad). + The sink or source pad identifiers reference a non-existing pad or reference + pads of different types (ie. the sink_pad identifiers refers to a source + pad), or the ``which`` field has an unsupported value. E2BIG The application provided ``num_routes`` for ``VIDIOC_SUBDEV_S_ROUTING`` is diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst index 6b629c19168c..19e6c3e9c06d 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst @@ -116,10 +116,9 @@ EBUSY ``VIDIOC_SUBDEV_S_SELECTION`` EINVAL - The struct :c:type:`v4l2_subdev_selection` - ``pad`` references a non-existing pad, the ``which`` field - references a non-existing format, or the selection target is not - supported on the given subdev pad. + The struct :c:type:`v4l2_subdev_selection` ``pad`` references a + non-existing pad, the ``which`` field has an unsupported value, or the + selection target is not supported on the given subdev pad. EPERM The ``VIDIOC_SUBDEV_S_SELECTION`` ioctl has been called on a read-only |