diff options
Diffstat (limited to '3.3.1_RC1/3.3.1_RC1_test_results/beaglebone/testresults.json')
| -rw-r--r-- | 3.3.1_RC1/3.3.1_RC1_test_results/beaglebone/testresults.json | 743 |
1 files changed, 743 insertions, 0 deletions
diff --git a/3.3.1_RC1/3.3.1_RC1_test_results/beaglebone/testresults.json b/3.3.1_RC1/3.3.1_RC1_test_results/beaglebone/testresults.json new file mode 100644 index 0000000000..921e8f048c --- /dev/null +++ b/3.3.1_RC1/3.3.1_RC1_test_results/beaglebone/testresults.json @@ -0,0 +1,743 @@ +{
+ "manual_bsp-hw_20210520140707": {
+ "configuration": {
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "LAYERS": {
+ "meta": {
+ "branch": "hardknott",
+ "commit": "05a8aad57ce250b124db16705acec557819905ae",
+ "commit_count": 61720
+ },
+ "meta-poky": {
+ "branch": "hardknott",
+ "commit": "05a8aad57ce250b124db16705acec557819905ae",
+ "commit_count": 61720
+ },
+ "meta-yocto-bsp": {
+ "branch": "hardknott",
+ "commit": "05a8aad57ce250b124db16705acec557819905ae",
+ "commit_count": 61720
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20210520140707",
+ "TEST_MODULE": "bsp-hw",
+ "TEST_TYPE": "manual"
+ },
+ "result": {
+ "bsps-hw.bsps-hw.Add_multiple_files_in_media_player": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Check_if_RTC_(Real_Time_Clock)_can_work_correctly": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.Check_if_SATA_disk_can_work_correctly": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Check_if_watchdog_can_reset_the_target_system": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.Graphics_-_ABAT": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Graphics_-_x11perf_-_2D": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_HDD-drive": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_SD-drive": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.System_can_boot_up_via_NFS": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_Seek_bar_and_volume_control": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_HDD": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_SD": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_if_LAN_device_works_well_after_resume_from_suspend_state": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_if_usb_hid_device_works_well_after_resume_from_suspend_state": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.audio_-_play_(ogg)_with_HDMI": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.audio_-_play_(wav)_with_HDMI": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.boot_and_install_from_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.boot_from_runlevel_3": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.boot_from_runlevel_5": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.check_CPU_utilization_after_standby": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.click_terminal_icon_on_X_desktop": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.connman_offline_mode_in_connman-gnome": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.ethernet_get_IP_in_connman_via_DHCP": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.ethernet_static_ip_set_in_connman": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.live_boot_from_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.media_player_-_play_video_(ogv)": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.media_player_-_stop/play_button_(ogv)": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.standby": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.switch_among_multi_applications_and_desktop": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.video_-_libva_check_(ogg_video_play)": {
+ "status": "SKIPPED"
+ }
+ }
+ },
+ "runtime_core-image-sato-sdk_beaglebone-yocto_20210519063037": {
+ "configuration": {
+ "DISTRO": "poky",
+ "HOST_DISTRO": "ubuntu-18.04",
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "IMAGE_PKGTYPE": "rpm",
+ "LAYERS": {
+ "meta": {
+ "branch": "hardknott",
+ "commit": "05a8aad57ce250b124db16705acec557819905ae",
+ "commit_count": 61720
+ },
+ "meta-poky": {
+ "branch": "hardknott",
+ "commit": "05a8aad57ce250b124db16705acec557819905ae",
+ "commit_count": 61720
+ },
+ "meta-yocto-bsp": {
+ "branch": "hardknott",
+ "commit": "05a8aad57ce250b124db16705acec557819905ae",
+ "commit_count": 61720
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20210519063037",
+ "TEST_TYPE": "runtime"
+ },
+ "result": {
+ "apt.AptRepoTest.test_apt_install_from_repo": {
+ "duration": 0.0002467632293701172,
+ "log": "Test requires apt to be installed",
+ "status": "SKIPPED"
+ },
+ "buildcpio.BuildCpioTest.test_cpio": {
+ "duration": 473.61039447784424,
+ "status": "PASSED"
+ },
+ "buildgalculator.GalculatorTest.test_galculator": {
+ "duration": 0.0012295246124267578,
+ "log": "Test requires gtk+3 to be installed",
+ "status": "SKIPPED"
+ },
+ "buildlzip.BuildLzipTest.test_lzip": {
+ "duration": 101.60577344894409,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_help": {
+ "duration": 0.28038740158081055,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_running": {
+ "duration": 0.31007933616638184,
+ "status": "PASSED"
+ },
+ "date.DateTest.test_date": {
+ "duration": 0.9567019939422607,
+ "status": "PASSED"
+ },
+ "df.DfTest.test_df": {
+ "duration": 0.27106475830078125,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_help": {
+ "duration": 9.62734079360962,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_history": {
+ "duration": 6.715806484222412,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_info": {
+ "duration": 4.345020532608032,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_search": {
+ "duration": 4.291193723678589,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_version": {
+ "duration": 4.132136583328247,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_exclude": {
+ "duration": 90.84043431282043,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install": {
+ "duration": 17.14413547515869,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_dependency": {
+ "duration": 17.1960928440094,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_disk": {
+ "duration": 22.02594494819641,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_http": {
+ "duration": 17.077284812927246,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot": {
+ "duration": 50.69139575958252,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": {
+ "duration": 0.0007340908050537109,
+ "log": "Test run when enable usrmege",
+ "status": "SKIPPED"
+ },
+ "dnf.DnfRepoTest.test_dnf_makecache": {
+ "duration": 3.9153525829315186,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_reinstall": {
+ "duration": 6.3826563358306885,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_repoinfo": {
+ "duration": 4.391417026519775,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gcc_compile": {
+ "duration": 2.2826037406921387,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp2_compile": {
+ "duration": 2.6278841495513916,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp_compile": {
+ "duration": 3.2116475105285645,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_make": {
+ "duration": 2.0415570735931396,
+ "status": "PASSED"
+ },
+ "gi.GObjectIntrospectionTest.test_python": {
+ "duration": 1.7917520999908447,
+ "status": "PASSED"
+ },
+ "kernelmodule.KernelModuleTest.test_kernel_module": {
+ "duration": 187.495623588562,
+ "status": "PASSED"
+ },
+ "ldd.LddTest.test_ldd": {
+ "duration": 0.807945966720581,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_newlog": {
+ "duration": 1.468306541442871,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_wtmp": {
+ "duration": 1.2316362857818604,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTest.test_syslog_running": {
+ "duration": 0.28283143043518066,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_logger": {
+ "duration": 1.488487958908081,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_restart": {
+ "duration": 2.4796385765075684,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_startup_config": {
+ "duration": 5.655651092529297,
+ "status": "PASSED"
+ },
+ "opkg.OpkgRepoTest.test_opkg_install_from_repo": {
+ "duration": 0.0007319450378417969,
+ "log": "Test requires opkg to be installed",
+ "status": "SKIPPED"
+ },
+ "pam.PamBasicTest.test_pam": {
+ "duration": 0.0010478496551513672,
+ "log": "Test requires pam to be in DISTRO_FEATURES",
+ "status": "SKIPPED"
+ },
+ "parselogs.ParseLogsTest.test_parselogs": {
+ "duration": 4.7590858936309814,
+ "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/harkknott/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/harkknott/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 382, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 30 != 0 : Log: /buildarea4/yzhao1/yocto/harkknott/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 0.133422] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.092140] CPU0: Spectre v2: using BPIALL workaround\n[ 0.093400] Setting up static identity map for 0x80100000 - 0x80100060\n[ 0.093574] rcu: Hierarchical SRCU implementation.\n[ 0.094901] devtmpfs: initialized\n[ 0.109313] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3\n[ 0.109613] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.109642] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.111139] pinctrl core: initialized pinctrl subsystem\n[ 0.112386] NET: Registered protocol family 16\n[ 0.115077] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.133422] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.134742] thermal_sys: Registered thermal governor 'step_wise'\n[ 0.135123] cpuidle: using governor ladder\n[ 0.135166] cpuidle: using governor menu\n[ 1.268274] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 1.269480] Serial: AMBA PL011 UART driver\n[ 1.291001] Kprobes globally optimized\n[ 1.460643] raid6: int32x8 gen() 170 MB/s\n[ 1.630867] raid6: int32x8 xor() 108 MB/s\n[ 1.800540] raid6: int32x4 gen() 199 MB/s\n[ 1.970559] raid6: int32x4 xor() 118 MB/s\n\n***********************\nCentral error: [ 3.744230] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.564855] xor: measuring software checksum speed\n[ 3.572778] arm4regs : 1274 MB/sec\n[ 3.583382] 8regs : 939 MB/sec\n[ 3.591170] 32regs : 1273 MB/sec\n[ 3.591180] xor: using function: arm4regs (1274 MB/sec)\n[ 3.591205] Key type asymmetric registered\n[ 3.591215] Asymmetric key parser 'x509' registered\n[ 3.591307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591321] io scheduler mq-deadline registered\n[ 3.591330] io scheduler kyber registered\n[ 3.744230] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744268] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973330] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973368] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034276] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034313] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046316] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046348] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111468] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111516] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134265] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n\n***********************\nCentral error: [ 3.973330] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.583382] 8regs : 939 MB/sec\n[ 3.591170] 32regs : 1273 MB/sec\n[ 3.591180] xor: using function: arm4regs (1274 MB/sec)\n[ 3.591205] Key type asymmetric registered\n[ 3.591215] Asymmetric key parser 'x509' registered\n[ 3.591307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591321] io scheduler mq-deadline registered\n[ 3.591330] io scheduler kyber registered\n[ 3.744230] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744268] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973330] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973368] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034276] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034313] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046316] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046348] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111468] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111516] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134265] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.143326] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.145987] printk: console [ttyS0] disabled\n\n***********************\nCentral error: [ 4.034276] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.591180] xor: using function: arm4regs (1274 MB/sec)\n[ 3.591205] Key type asymmetric registered\n[ 3.591215] Asymmetric key parser 'x509' registered\n[ 3.591307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591321] io scheduler mq-deadline registered\n[ 3.591330] io scheduler kyber registered\n[ 3.744230] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744268] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973330] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973368] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034276] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034313] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046316] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046348] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111468] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111516] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134265] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.143326] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.145987] printk: console [ttyS0] disabled\n[ 4.146103] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.704230] printk: console [ttyS0] enabled\n\n***********************\nCentral error: [ 4.046316] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.591215] Asymmetric key parser 'x509' registered\n[ 3.591307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591321] io scheduler mq-deadline registered\n[ 3.591330] io scheduler kyber registered\n[ 3.744230] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744268] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973330] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973368] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034276] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034313] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046316] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046348] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111468] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111516] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134265] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.143326] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.145987] printk: console [ttyS0] disabled\n[ 4.146103] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.704230] printk: console [ttyS0] enabled\n[ 4.709744] omap_rng 48310000.rng: Random Number Generator ver. 20\n[ 4.715015] random: crng init done\n\n***********************\nCentral error: [ 5.140646] tps65217-pmic: Failed to locate of_node [id: -1]\n***********************\n[ 5.046551] ThumbEE CPU extension supported.\n[ 5.049535] omap_voltage_late_init: Voltage driver support not added\n[ 5.063561] Loading compiled-in X.509 certificates\n[ 5.067179] Key type ._fscrypt registered\n[ 5.070347] Key type .fscrypt registered\n[ 5.072984] Key type fscrypt-provisioning registered\n[ 5.078361] Btrfs loaded, crc32c=crc32c-generic\n[ 5.084118] Key type encrypted registered\n[ 5.094830] mmc0: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA\n[ 5.113412] OMAP GPIO hardware version 0.1\n[ 5.140646] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.152449] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.159508] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.164787] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.172377] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.180176] mmc0: new high speed MMC card at address 0001\n[ 5.187335] mmcblk0: mmc0:0001 MMC02G 1.79 GiB \n[ 5.196495] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB\n[ 5.202179] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 5.209622] sdhci-omap 48060000.mmc: Got CD GPIO\n[ 5.214110] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n\n***********************\nCentral error: [ 5.152449] tps65217-bl: Failed to locate of_node [id: -1]\n***********************\n[ 5.049535] omap_voltage_late_init: Voltage driver support not added\n[ 5.063561] Loading compiled-in X.509 certificates\n[ 5.067179] Key type ._fscrypt registered\n[ 5.070347] Key type .fscrypt registered\n[ 5.072984] Key type fscrypt-provisioning registered\n[ 5.078361] Btrfs loaded, crc32c=crc32c-generic\n[ 5.084118] Key type encrypted registered\n[ 5.094830] mmc0: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA\n[ 5.113412] OMAP GPIO hardware version 0.1\n[ 5.140646] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.152449] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.159508] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.164787] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.172377] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.180176] mmc0: new high speed MMC card at address 0001\n[ 5.187335] mmcblk0: mmc0:0001 MMC02G 1.79 GiB \n[ 5.196495] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB\n[ 5.202179] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 5.209622] sdhci-omap 48060000.mmc: Got CD GPIO\n[ 5.214110] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n[ 5.219257] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator\n\n***********************\nCentral error: [ 5.371096] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n***********************\n[ 5.214110] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n[ 5.219257] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator\n[ 5.225709] mmcblk0rpmb: mmc0:0001 MMC02G partition 3 128 KiB, chardev (249:0)\n[ 5.289705] mmc1: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA\n[ 5.329947] mmc1: new high speed SDHC card at address 1234\n[ 5.335101] mmcblk1: mmc1:1234 SA32G 28.9 GiB \n[ 5.340738] mmcblk1: p1 p2\n[ 5.352476] tda998x 0-0070: found TDA19988\n[ 5.358457] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)\n[ 5.364474] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0\n[ 5.371096] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.377208] printk: console [netcon0] enabled\n[ 5.380426] usb 1-1: new high-speed USB device number 2 using musb-hdrc\n[ 5.385979] netconsole: network logging started\n[ 5.390417] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.396072] cfg80211: Loading compiled-in X.509 certificates for regulatory database\n[ 5.406496] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\n[ 5.412247] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\n[ 5.419601] cfg80211: failed to load regulatory.db\n[ 5.437818] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)\n[ 5.445106] VFS: Mounted root (ext4 filesystem) readonly on device 179:26.\n\n***********************\nCentral error: [ 5.390417] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n***********************\n[ 5.329947] mmc1: new high speed SDHC card at address 1234\n[ 5.335101] mmcblk1: mmc1:1234 SA32G 28.9 GiB \n[ 5.340738] mmcblk1: p1 p2\n[ 5.352476] tda998x 0-0070: found TDA19988\n[ 5.358457] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)\n[ 5.364474] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0\n[ 5.371096] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.377208] printk: console [netcon0] enabled\n[ 5.380426] usb 1-1: new high-speed USB device number 2 using musb-hdrc\n[ 5.385979] netconsole: network logging started\n[ 5.390417] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.396072] cfg80211: Loading compiled-in X.509 certificates for regulatory database\n[ 5.406496] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\n[ 5.412247] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\n[ 5.419601] cfg80211: failed to load regulatory.db\n[ 5.437818] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)\n[ 5.445106] VFS: Mounted root (ext4 filesystem) readonly on device 179:26.\n[ 5.452396] devtmpfs: mounted\n[ 5.458371] Freeing unused kernel memory: 1024K\n[ 5.470669] Run /sbin/init as init process\n[ 5.473483] with arguments:\n\n***********************\nCentral error: [ 6.260032] usb 1-1.4: device descriptor read/64, error -32\n***********************\n[ 5.473488] /sbin/init\n[ 5.473493] with environment:\n[ 5.473498] HOME=/\n[ 5.473503] TERM=linux\n[ 5.571349] hub 1-1:1.0: USB hub found\n[ 5.574423] hub 1-1:1.0: 7 ports detected\n[ 5.900150] usb 1-1.3: new high-speed USB device number 3 using musb-hdrc\n[ 6.037466] usb-storage 1-1.3:1.0: USB Mass Storage device detected\n[ 6.054199] scsi host0: usb-storage 1-1.3:1.0\n[ 6.160319] usb 1-1.4: new low-speed USB device number 4 using musb-hdrc\n[ 6.260032] usb 1-1.4: device descriptor read/64, error -32\n[ 6.480139] usb 1-1.4: device descriptor read/64, error -32\n[ 6.691733] udevd[132]: starting version 3.2.10\n[ 6.700068] usb 1-1.4: new low-speed USB device number 5 using musb-hdrc\n[ 6.783506] udevd[133]: starting eudev-3.2.10\n[ 6.800142] usb 1-1.4: device descriptor read/64, error -32\n[ 7.020112] usb 1-1.4: device descriptor read/64, error -32\n[ 7.140204] usb 1-1-port4: attempt power cycle\n[ 7.170161] scsi 0:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2\n[ 7.178787] sd 0:0:0:0: [sda] 3905407 512-byte logical blocks: (2.00 GB/1.86 GiB)\n[ 7.230715] sd 0:0:0:0: [sda] Write Protect is off\n\n***********************\nCentral error: [ 6.480139] usb 1-1.4: device descriptor read/64, error -32\n***********************\n[ 5.473493] with environment:\n[ 5.473498] HOME=/\n[ 5.473503] TERM=linux\n[ 5.571349] hub 1-1:1.0: USB hub found\n[ 5.574423] hub 1-1:1.0: 7 ports detected\n[ 5.900150] usb 1-1.3: new high-speed USB device number 3 using musb-hdrc\n[ 6.037466] usb-storage 1-1.3:1.0: USB Mass Storage device detected\n[ 6.054199] scsi host0: usb-storage 1-1.3:1.0\n[ 6.160319] usb 1-1.4: new low-speed USB device number 4 using musb-hdrc\n[ 6.260032] usb 1-1.4: device descriptor read/64, error -32\n[ 6.480139] usb 1-1.4: device descriptor read/64, error -32\n[ 6.691733] udevd[132]: starting version 3.2.10\n[ 6.700068] usb 1-1.4: new low-speed USB device number 5 using musb-hdrc\n[ 6.783506] udevd[133]: starting eudev-3.2.10\n[ 6.800142] usb 1-1.4: device descriptor read/64, error -32\n[ 7.020112] usb 1-1.4: device descriptor read/64, error -32\n[ 7.140204] usb 1-1-port4: attempt power cycle\n[ 7.170161] scsi 0:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2\n[ 7.178787] sd 0:0:0:0: [sda] 3905407 512-byte logical blocks: (2.00 GB/1.86 GiB)\n[ 7.230715] sd 0:0:0:0: [sda] Write Protect is off\n[ 7.234249] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08\n\n***********************\nCentral error: [ 6.800142] usb 1-1.4: device descriptor read/64, error -32\n***********************\n[ 5.574423] hub 1-1:1.0: 7 ports detected\n[ 5.900150] usb 1-1.3: new high-speed USB device number 3 using musb-hdrc\n[ 6.037466] usb-storage 1-1.3:1.0: USB Mass Storage device detected\n[ 6.054199] scsi host0: usb-storage 1-1.3:1.0\n[ 6.160319] usb 1-1.4: new low-speed USB device number 4 using musb-hdrc\n[ 6.260032] usb 1-1.4: device descriptor read/64, error -32\n[ 6.480139] usb 1-1.4: device descriptor read/64, error -32\n[ 6.691733] udevd[132]: starting version 3.2.10\n[ 6.700068] usb 1-1.4: new low-speed USB device number 5 using musb-hdrc\n[ 6.783506] udevd[133]: starting eudev-3.2.10\n[ 6.800142] usb 1-1.4: device descriptor read/64, error -32\n[ 7.020112] usb 1-1.4: device descriptor read/64, error -32\n[ 7.140204] usb 1-1-port4: attempt power cycle\n[ 7.170161] scsi 0:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2\n[ 7.178787] sd 0:0:0:0: [sda] 3905407 512-byte logical blocks: (2.00 GB/1.86 GiB)\n[ 7.230715] sd 0:0:0:0: [sda] Write Protect is off\n[ 7.234249] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08\n[ 7.252551] sd 0:0:0:0: [sda] No Caching mode page found\n[ 7.256609] sd 0:0:0:0: [sda] Assuming drive cache: write through\n[ 7.357367] sda: sda1\n[ 7.362569] sd 0:0:0:0: [sda] Attached SCSI removable disk\n\n***********************\nCentral error: [ 7.020112] usb 1-1.4: device descriptor read/64, error -32\n***********************\n[ 5.900150] usb 1-1.3: new high-speed USB device number 3 using musb-hdrc\n[ 6.037466] usb-storage 1-1.3:1.0: USB Mass Storage device detected\n[ 6.054199] scsi host0: usb-storage 1-1.3:1.0\n[ 6.160319] usb 1-1.4: new low-speed USB device number 4 using musb-hdrc\n[ 6.260032] usb 1-1.4: device descriptor read/64, error -32\n[ 6.480139] usb 1-1.4: device descriptor read/64, error -32\n[ 6.691733] udevd[132]: starting version 3.2.10\n[ 6.700068] usb 1-1.4: new low-speed USB device number 5 using musb-hdrc\n[ 6.783506] udevd[133]: starting eudev-3.2.10\n[ 6.800142] usb 1-1.4: device descriptor read/64, error -32\n[ 7.020112] usb 1-1.4: device descriptor read/64, error -32\n[ 7.140204] usb 1-1-port4: attempt power cycle\n[ 7.170161] scsi 0:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2\n[ 7.178787] sd 0:0:0:0: [sda] 3905407 512-byte logical blocks: (2.00 GB/1.86 GiB)\n[ 7.230715] sd 0:0:0:0: [sda] Write Protect is off\n[ 7.234249] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08\n[ 7.252551] sd 0:0:0:0: [sda] No Caching mode page found\n[ 7.256609] sd 0:0:0:0: [sda] Assuming drive cache: write through\n[ 7.357367] sda: sda1\n[ 7.362569] sd 0:0:0:0: [sda] Attached SCSI removable disk\n[ 7.551458] davinci-mcasp 48038000.mcasp: IRQ common not found\n\n***********************\nCentral error: [ 8.270118] usb 1-1.4: device not accepting address 6, error -32\n***********************\n[ 7.170161] scsi 0:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2\n[ 7.178787] sd 0:0:0:0: [sda] 3905407 512-byte logical blocks: (2.00 GB/1.86 GiB)\n[ 7.230715] sd 0:0:0:0: [sda] Write Protect is off\n[ 7.234249] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08\n[ 7.252551] sd 0:0:0:0: [sda] No Caching mode page found\n[ 7.256609] sd 0:0:0:0: [sda] Assuming drive cache: write through\n[ 7.357367] sda: sda1\n[ 7.362569] sd 0:0:0:0: [sda] Attached SCSI removable disk\n[ 7.551458] davinci-mcasp 48038000.mcasp: IRQ common not found\n[ 7.810126] usb 1-1.4: new low-speed USB device number 6 using musb-hdrc\n[ 8.270118] usb 1-1.4: device not accepting address 6, error -32\n[ 8.440154] usb 1-1.4: new low-speed USB device number 7 using musb-hdrc\n[ 8.901449] usb 1-1.4: device not accepting address 7, error -32\n[ 8.906328] usb 1-1-port4: unable to enumerate USB device\n[ 9.090176] usb 1-1.6: new low-speed USB device number 8 using musb-hdrc\n[ 9.244771] input: USB Optical Mouse as /devices/platform/ocp/47400000.target-module/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.6/1-1.6:1.0/0003:0461:4D81.0001/input/input0\n[ 9.450733] hid-generic 0003:0461:4D81.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-musb-hdrc.1-1.6/input0\n[ 11.479425] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem\n[ 11.511361] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)\n[ 11.675570] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)\n[ 17.078511] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0)\n\n***********************\nCentral error: [ 8.901449] usb 1-1.4: device not accepting address 7, error -32\n***********************\n[ 7.230715] sd 0:0:0:0: [sda] Write Protect is off\n[ 7.234249] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08\n[ 7.252551] sd 0:0:0:0: [sda] No Caching mode page found\n[ 7.256609] sd 0:0:0:0: [sda] Assuming drive cache: write through\n[ 7.357367] sda: sda1\n[ 7.362569] sd 0:0:0:0: [sda] Attached SCSI removable disk\n[ 7.551458] davinci-mcasp 48038000.mcasp: IRQ common not found\n[ 7.810126] usb 1-1.4: new low-speed USB device number 6 using musb-hdrc\n[ 8.270118] usb 1-1.4: device not accepting address 6, error -32\n[ 8.440154] usb 1-1.4: new low-speed USB device number 7 using musb-hdrc\n[ 8.901449] usb 1-1.4: device not accepting address 7, error -32\n[ 8.906328] usb 1-1-port4: unable to enumerate USB device\n[ 9.090176] usb 1-1.6: new low-speed USB device number 8 using musb-hdrc\n[ 9.244771] input: USB Optical Mouse as /devices/platform/ocp/47400000.target-module/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.6/1-1.6:1.0/0003:0461:4D81.0001/input/input0\n[ 9.450733] hid-generic 0003:0461:4D81.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-musb-hdrc.1-1.6/input0\n[ 11.479425] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem\n[ 11.511361] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)\n[ 11.675570] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)\n[ 17.078511] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0)\n[ 17.161516] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL)\n[ 20.330685] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off\n\n***********************\nLog: /buildarea4/yzhao1/yocto/harkknott/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg\n-----------------------\nCentral error: [ 0.133422] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.092140] CPU0: Spectre v2: using BPIALL workaround\n[ 0.093400] Setting up static identity map for 0x80100000 - 0x80100060\n[ 0.093574] rcu: Hierarchical SRCU implementation.\n[ 0.094901] devtmpfs: initialized\n[ 0.109313] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3\n[ 0.109613] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.109642] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.111139] pinctrl core: initialized pinctrl subsystem\n[ 0.112386] NET: Registered protocol family 16\n[ 0.115077] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.133422] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.134742] thermal_sys: Registered thermal governor 'step_wise'\n[ 0.135123] cpuidle: using governor ladder\n[ 0.135166] cpuidle: using governor menu\n[ 1.268274] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 1.269480] Serial: AMBA PL011 UART driver\n[ 1.291001] Kprobes globally optimized\n[ 1.460643] raid6: int32x8 gen() 170 MB/s\n[ 1.630867] raid6: int32x8 xor() 108 MB/s\n[ 1.800540] raid6: int32x4 gen() 199 MB/s\n[ 1.970559] raid6: int32x4 xor() 118 MB/s\n\n***********************\nCentral error: [ 3.744230] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.564855] xor: measuring software checksum speed\n[ 3.572778] arm4regs : 1274 MB/sec\n[ 3.583382] 8regs : 939 MB/sec\n[ 3.591170] 32regs : 1273 MB/sec\n[ 3.591180] xor: using function: arm4regs (1274 MB/sec)\n[ 3.591205] Key type asymmetric registered\n[ 3.591215] Asymmetric key parser 'x509' registered\n[ 3.591307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591321] io scheduler mq-deadline registered\n[ 3.591330] io scheduler kyber registered\n[ 3.744230] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744268] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973330] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973368] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034276] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034313] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046316] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046348] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111468] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111516] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134265] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n\n***********************\nCentral error: [ 3.973330] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.583382] 8regs : 939 MB/sec\n[ 3.591170] 32regs : 1273 MB/sec\n[ 3.591180] xor: using function: arm4regs (1274 MB/sec)\n[ 3.591205] Key type asymmetric registered\n[ 3.591215] Asymmetric key parser 'x509' registered\n[ 3.591307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591321] io scheduler mq-deadline registered\n[ 3.591330] io scheduler kyber registered\n[ 3.744230] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744268] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973330] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973368] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034276] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034313] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046316] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046348] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111468] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111516] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134265] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.143326] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.145987] printk: console [ttyS0] disabled\n\n***********************\nCentral error: [ 4.034276] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.591180] xor: using function: arm4regs (1274 MB/sec)\n[ 3.591205] Key type asymmetric registered\n[ 3.591215] Asymmetric key parser 'x509' registered\n[ 3.591307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591321] io scheduler mq-deadline registered\n[ 3.591330] io scheduler kyber registered\n[ 3.744230] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744268] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973330] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973368] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034276] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034313] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046316] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046348] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111468] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111516] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134265] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.143326] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.145987] printk: console [ttyS0] disabled\n[ 4.146103] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.704230] printk: console [ttyS0] enabled\n\n***********************\nCentral error: [ 4.046316] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.591215] Asymmetric key parser 'x509' registered\n[ 3.591307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591321] io scheduler mq-deadline registered\n[ 3.591330] io scheduler kyber registered\n[ 3.744230] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744268] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973330] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973368] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034276] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034313] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046316] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046348] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111468] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111516] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134265] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.143326] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.145987] printk: console [ttyS0] disabled\n[ 4.146103] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.704230] printk: console [ttyS0] enabled\n[ 4.709744] omap_rng 48310000.rng: Random Number Generator ver. 20\n[ 4.715015] random: crng init done\n\n***********************\nCentral error: [ 5.140646] tps65217-pmic: Failed to locate of_node [id: -1]\n***********************\n[ 5.046551] ThumbEE CPU extension supported.\n[ 5.049535] omap_voltage_late_init: Voltage driver support not added\n[ 5.063561] Loading compiled-in X.509 certificates\n[ 5.067179] Key type ._fscrypt registered\n[ 5.070347] Key type .fscrypt registered\n[ 5.072984] Key type fscrypt-provisioning registered\n[ 5.078361] Btrfs loaded, crc32c=crc32c-generic\n[ 5.084118] Key type encrypted registered\n[ 5.094830] mmc0: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA\n[ 5.113412] OMAP GPIO hardware version 0.1\n[ 5.140646] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.152449] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.159508] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.164787] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.172377] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.180176] mmc0: new high speed MMC card at address 0001\n[ 5.187335] mmcblk0: mmc0:0001 MMC02G 1.79 GiB \n[ 5.196495] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB\n[ 5.202179] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 5.209622] sdhci-omap 48060000.mmc: Got CD GPIO\n[ 5.214110] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n\n***********************\nCentral error: [ 5.152449] tps65217-bl: Failed to locate of_node [id: -1]\n***********************\n[ 5.049535] omap_voltage_late_init: Voltage driver support not added\n[ 5.063561] Loading compiled-in X.509 certificates\n[ 5.067179] Key type ._fscrypt registered\n[ 5.070347] Key type .fscrypt registered\n[ 5.072984] Key type fscrypt-provisioning registered\n[ 5.078361] Btrfs loaded, crc32c=crc32c-generic\n[ 5.084118] Key type encrypted registered\n[ 5.094830] mmc0: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA\n[ 5.113412] OMAP GPIO hardware version 0.1\n[ 5.140646] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.152449] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.159508] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.164787] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.172377] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.180176] mmc0: new high speed MMC card at address 0001\n[ 5.187335] mmcblk0: mmc0:0001 MMC02G 1.79 GiB \n[ 5.196495] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB\n[ 5.202179] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 5.209622] sdhci-omap 48060000.mmc: Got CD GPIO\n[ 5.214110] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n[ 5.219257] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator\n\n***********************\nCentral error: [ 5.371096] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n***********************\n[ 5.214110] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n[ 5.219257] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator\n[ 5.225709] mmcblk0rpmb: mmc0:0001 MMC02G partition 3 128 KiB, chardev (249:0)\n[ 5.289705] mmc1: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA\n[ 5.329947] mmc1: new high speed SDHC card at address 1234\n[ 5.335101] mmcblk1: mmc1:1234 SA32G 28.9 GiB \n[ 5.340738] mmcblk1: p1 p2\n[ 5.352476] tda998x 0-0070: found TDA19988\n[ 5.358457] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)\n[ 5.364474] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0\n[ 5.371096] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.377208] printk: console [netcon0] enabled\n[ 5.380426] usb 1-1: new high-speed USB device number 2 using musb-hdrc\n[ 5.385979] netconsole: network logging started\n[ 5.390417] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.396072] cfg80211: Loading compiled-in X.509 certificates for regulatory database\n[ 5.406496] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\n[ 5.412247] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\n[ 5.419601] cfg80211: failed to load regulatory.db\n[ 5.437818] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)\n[ 5.445106] VFS: Mounted root (ext4 filesystem) readonly on device 179:26.\n\n***********************\nCentral error: [ 5.390417] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n***********************\n[ 5.329947] mmc1: new high speed SDHC card at address 1234\n[ 5.335101] mmcblk1: mmc1:1234 SA32G 28.9 GiB \n[ 5.340738] mmcblk1: p1 p2\n[ 5.352476] tda998x 0-0070: found TDA19988\n[ 5.358457] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)\n[ 5.364474] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0\n[ 5.371096] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.377208] printk: console [netcon0] enabled\n[ 5.380426] usb 1-1: new high-speed USB device number 2 using musb-hdrc\n[ 5.385979] netconsole: network logging started\n[ 5.390417] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.396072] cfg80211: Loading compiled-in X.509 certificates for regulatory database\n[ 5.406496] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\n[ 5.412247] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\n[ 5.419601] cfg80211: failed to load regulatory.db\n[ 5.437818] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)\n[ 5.445106] VFS: Mounted root (ext4 filesystem) readonly on device 179:26.\n[ 5.452396] devtmpfs: mounted\n[ 5.458371] Freeing unused kernel memory: 1024K\n[ 5.470669] Run /sbin/init as init process\n[ 5.473483] with arguments:\n\n***********************\nCentral error: [ 6.260032] usb 1-1.4: device descriptor read/64, error -32\n***********************\n[ 5.473488] /sbin/init\n[ 5.473493] with environment:\n[ 5.473498] HOME=/\n[ 5.473503] TERM=linux\n[ 5.571349] hub 1-1:1.0: USB hub found\n[ 5.574423] hub 1-1:1.0: 7 ports detected\n[ 5.900150] usb 1-1.3: new high-speed USB device number 3 using musb-hdrc\n[ 6.037466] usb-storage 1-1.3:1.0: USB Mass Storage device detected\n[ 6.054199] scsi host0: usb-storage 1-1.3:1.0\n[ 6.160319] usb 1-1.4: new low-speed USB device number 4 using musb-hdrc\n[ 6.260032] usb 1-1.4: device descriptor read/64, error -32\n[ 6.480139] usb 1-1.4: device descriptor read/64, error -32\n[ 6.691733] udevd[132]: starting version 3.2.10\n[ 6.700068] usb 1-1.4: new low-speed USB device number 5 using musb-hdrc\n[ 6.783506] udevd[133]: starting eudev-3.2.10\n[ 6.800142] usb 1-1.4: device descriptor read/64, error -32\n[ 7.020112] usb 1-1.4: device descriptor read/64, error -32\n[ 7.140204] usb 1-1-port4: attempt power cycle\n[ 7.170161] scsi 0:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2\n[ 7.178787] sd 0:0:0:0: [sda] 3905407 512-byte logical blocks: (2.00 GB/1.86 GiB)\n[ 7.230715] sd 0:0:0:0: [sda] Write Protect is off\n\n***********************\nCentral error: [ 6.480139] usb 1-1.4: device descriptor read/64, error -32\n***********************\n[ 5.473493] with environment:\n[ 5.473498] HOME=/\n[ 5.473503] TERM=linux\n[ 5.571349] hub 1-1:1.0: USB hub found\n[ 5.574423] hub 1-1:1.0: 7 ports detected\n[ 5.900150] usb 1-1.3: new high-speed USB device number 3 using musb-hdrc\n[ 6.037466] usb-storage 1-1.3:1.0: USB Mass Storage device detected\n[ 6.054199] scsi host0: usb-storage 1-1.3:1.0\n[ 6.160319] usb 1-1.4: new low-speed USB device number 4 using musb-hdrc\n[ 6.260032] usb 1-1.4: device descriptor read/64, error -32\n[ 6.480139] usb 1-1.4: device descriptor read/64, error -32\n[ 6.691733] udevd[132]: starting version 3.2.10\n[ 6.700068] usb 1-1.4: new low-speed USB device number 5 using musb-hdrc\n[ 6.783506] udevd[133]: starting eudev-3.2.10\n[ 6.800142] usb 1-1.4: device descriptor read/64, error -32\n[ 7.020112] usb 1-1.4: device descriptor read/64, error -32\n[ 7.140204] usb 1-1-port4: attempt power cycle\n[ 7.170161] scsi 0:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2\n[ 7.178787] sd 0:0:0:0: [sda] 3905407 512-byte logical blocks: (2.00 GB/1.86 GiB)\n[ 7.230715] sd 0:0:0:0: [sda] Write Protect is off\n[ 7.234249] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08\n\n***********************\nCentral error: [ 6.800142] usb 1-1.4: device descriptor read/64, error -32\n***********************\n[ 5.574423] hub 1-1:1.0: 7 ports detected\n[ 5.900150] usb 1-1.3: new high-speed USB device number 3 using musb-hdrc\n[ 6.037466] usb-storage 1-1.3:1.0: USB Mass Storage device detected\n[ 6.054199] scsi host0: usb-storage 1-1.3:1.0\n[ 6.160319] usb 1-1.4: new low-speed USB device number 4 using musb-hdrc\n[ 6.260032] usb 1-1.4: device descriptor read/64, error -32\n[ 6.480139] usb 1-1.4: device descriptor read/64, error -32\n[ 6.691733] udevd[132]: starting version 3.2.10\n[ 6.700068] usb 1-1.4: new low-speed USB device number 5 using musb-hdrc\n[ 6.783506] udevd[133]: starting eudev-3.2.10\n[ 6.800142] usb 1-1.4: device descriptor read/64, error -32\n[ 7.020112] usb 1-1.4: device descriptor read/64, error -32\n[ 7.140204] usb 1-1-port4: attempt power cycle\n[ 7.170161] scsi 0:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2\n[ 7.178787] sd 0:0:0:0: [sda] 3905407 512-byte logical blocks: (2.00 GB/1.86 GiB)\n[ 7.230715] sd 0:0:0:0: [sda] Write Protect is off\n[ 7.234249] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08\n[ 7.252551] sd 0:0:0:0: [sda] No Caching mode page found\n[ 7.256609] sd 0:0:0:0: [sda] Assuming drive cache: write through\n[ 7.357367] sda: sda1\n[ 7.362569] sd 0:0:0:0: [sda] Attached SCSI removable disk\n\n***********************\nCentral error: [ 7.020112] usb 1-1.4: device descriptor read/64, error -32\n***********************\n[ 5.900150] usb 1-1.3: new high-speed USB device number 3 using musb-hdrc\n[ 6.037466] usb-storage 1-1.3:1.0: USB Mass Storage device detected\n[ 6.054199] scsi host0: usb-storage 1-1.3:1.0\n[ 6.160319] usb 1-1.4: new low-speed USB device number 4 using musb-hdrc\n[ 6.260032] usb 1-1.4: device descriptor read/64, error -32\n[ 6.480139] usb 1-1.4: device descriptor read/64, error -32\n[ 6.691733] udevd[132]: starting version 3.2.10\n[ 6.700068] usb 1-1.4: new low-speed USB device number 5 using musb-hdrc\n[ 6.783506] udevd[133]: starting eudev-3.2.10\n[ 6.800142] usb 1-1.4: device descriptor read/64, error -32\n[ 7.020112] usb 1-1.4: device descriptor read/64, error -32\n[ 7.140204] usb 1-1-port4: attempt power cycle\n[ 7.170161] scsi 0:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2\n[ 7.178787] sd 0:0:0:0: [sda] 3905407 512-byte logical blocks: (2.00 GB/1.86 GiB)\n[ 7.230715] sd 0:0:0:0: [sda] Write Protect is off\n[ 7.234249] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08\n[ 7.252551] sd 0:0:0:0: [sda] No Caching mode page found\n[ 7.256609] sd 0:0:0:0: [sda] Assuming drive cache: write through\n[ 7.357367] sda: sda1\n[ 7.362569] sd 0:0:0:0: [sda] Attached SCSI removable disk\n[ 7.551458] davinci-mcasp 48038000.mcasp: IRQ common not found\n\n***********************\nCentral error: [ 8.270118] usb 1-1.4: device not accepting address 6, error -32\n***********************\n[ 7.170161] scsi 0:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2\n[ 7.178787] sd 0:0:0:0: [sda] 3905407 512-byte logical blocks: (2.00 GB/1.86 GiB)\n[ 7.230715] sd 0:0:0:0: [sda] Write Protect is off\n[ 7.234249] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08\n[ 7.252551] sd 0:0:0:0: [sda] No Caching mode page found\n[ 7.256609] sd 0:0:0:0: [sda] Assuming drive cache: write through\n[ 7.357367] sda: sda1\n[ 7.362569] sd 0:0:0:0: [sda] Attached SCSI removable disk\n[ 7.551458] davinci-mcasp 48038000.mcasp: IRQ common not found\n[ 7.810126] usb 1-1.4: new low-speed USB device number 6 using musb-hdrc\n[ 8.270118] usb 1-1.4: device not accepting address 6, error -32\n[ 8.440154] usb 1-1.4: new low-speed USB device number 7 using musb-hdrc\n[ 8.901449] usb 1-1.4: device not accepting address 7, error -32\n[ 8.906328] usb 1-1-port4: unable to enumerate USB device\n[ 9.090176] usb 1-1.6: new low-speed USB device number 8 using musb-hdrc\n[ 9.244771] input: USB Optical Mouse as /devices/platform/ocp/47400000.target-module/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.6/1-1.6:1.0/0003:0461:4D81.0001/input/input0\n[ 9.450733] hid-generic 0003:0461:4D81.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-musb-hdrc.1-1.6/input0\n[ 11.479425] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem\n[ 11.511361] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)\n[ 11.675570] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)\n\n***********************\nCentral error: [ 8.901449] usb 1-1.4: device not accepting address 7, error -32\n***********************\n[ 7.230715] sd 0:0:0:0: [sda] Write Protect is off\n[ 7.234249] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08\n[ 7.252551] sd 0:0:0:0: [sda] No Caching mode page found\n[ 7.256609] sd 0:0:0:0: [sda] Assuming drive cache: write through\n[ 7.357367] sda: sda1\n[ 7.362569] sd 0:0:0:0: [sda] Attached SCSI removable disk\n[ 7.551458] davinci-mcasp 48038000.mcasp: IRQ common not found\n[ 7.810126] usb 1-1.4: new low-speed USB device number 6 using musb-hdrc\n[ 8.270118] usb 1-1.4: device not accepting address 6, error -32\n[ 8.440154] usb 1-1.4: new low-speed USB device number 7 using musb-hdrc\n[ 8.901449] usb 1-1.4: device not accepting address 7, error -32\n[ 8.906328] usb 1-1-port4: unable to enumerate USB device\n[ 9.090176] usb 1-1.6: new low-speed USB device number 8 using musb-hdrc\n[ 9.244771] input: USB Optical Mouse as /devices/platform/ocp/47400000.target-module/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.6/1-1.6:1.0/0003:0461:4D81.0001/input/input0\n[ 9.450733] hid-generic 0003:0461:4D81.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-musb-hdrc.1-1.6/input0\n[ 11.479425] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem\n[ 11.511361] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)\n[ 11.675570] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)\n\n***********************\n30 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n",
+ "status": "FAILED"
+ },
+ "perl.PerlTest.test_perl_works": {
+ "duration": 0.25302577018737793,
+ "status": "PASSED"
+ },
+ "ping.PingTest.test_ping": {
+ "duration": 0.032117366790771484,
+ "status": "PASSED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectfail": {
+ "duration": 0.0006933212280273438,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectsuccess": {
+ "duration": 0.0005946159362792969,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "python.PythonTest.test_python3": {
+ "duration": 0.4701862335205078,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_help": {
+ "duration": 0.27748584747314453,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query": {
+ "duration": 0.5329015254974365,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query_nonroot": {
+ "duration": 5.212961196899414,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": {
+ "duration": 29.118509769439697,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_install": {
+ "duration": 2.164472818374634,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_remove": {
+ "duration": 1.0934088230133057,
+ "status": "PASSED"
+ },
+ "scp.ScpTest.test_scp_file": {
+ "duration": 1.315223217010498,
+ "status": "PASSED"
+ },
+ "ssh.SSHTest.test_ssh": {
+ "duration": 0.48294782638549805,
+ "status": "PASSED"
+ },
+ "stap.StapTest.test_stap": {
+ "duration": 271.30195450782776,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_basic": {
+ "duration": 0.0006086826324462891,
+ "log": "systemd is not the init manager for this image",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_failed": {
+ "duration": 0.0005247592926025391,
+ "log": "Test case systemd.SystemdBasicTests.test_systemd_failed depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_list": {
+ "duration": 0.00035691261291503906,
+ "log": "Test case systemd.SystemdBasicTests.test_systemd_list depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_boot_time": {
+ "duration": 0.000385284423828125,
+ "log": "Test case systemd.SystemdJournalTests.test_systemd_boot_time depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_journal": {
+ "duration": 0.0003552436828613281,
+ "log": "Test case systemd.SystemdJournalTests.test_systemd_journal depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable": {
+ "duration": 0.0004990100860595703,
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_disable_enable depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable_ro": {
+ "duration": 0.0003910064697265625,
+ "log": "Test is only meant to run with read-only-rootfs in IMAGE_FEATURES",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_status": {
+ "duration": 0.00037360191345214844,
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_status depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_stop_start": {
+ "duration": 0.0003476142883300781,
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_stop_start depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_wayland_info": {
+ "duration": 0.0004508495330810547,
+ "log": "Test requires wayland-utils to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_can_initialize_new_wayland_compositor": {
+ "duration": 0.0003809928894042969,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_running": {
+ "duration": 0.0003676414489746094,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "xorg.XorgTest.test_xorg_running": {
+ "duration": 0.5890493392944336,
+ "status": "PASSED"
+ }
+ }
+ },
+ "runtime_core-image-sato-sdk_beaglebone-yocto_20210520014237": {
+ "configuration": {
+ "DISTRO": "poky-altcfg",
+ "HOST_DISTRO": "ubuntu-18.04",
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "IMAGE_PKGTYPE": "rpm",
+ "LAYERS": {
+ "meta": {
+ "branch": "hardknott",
+ "commit": "05a8aad57ce250b124db16705acec557819905ae",
+ "commit_count": 61720
+ },
+ "meta-poky": {
+ "branch": "hardknott",
+ "commit": "05a8aad57ce250b124db16705acec557819905ae",
+ "commit_count": 61720
+ },
+ "meta-yocto-bsp": {
+ "branch": "hardknott",
+ "commit": "05a8aad57ce250b124db16705acec557819905ae",
+ "commit_count": 61720
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20210520014237",
+ "TEST_TYPE": "runtime"
+ },
+ "result": {
+ "apt.AptRepoTest.test_apt_install_from_repo": {
+ "duration": 0.0003075599670410156,
+ "log": "Test requires apt to be installed",
+ "status": "SKIPPED"
+ },
+ "buildcpio.BuildCpioTest.test_cpio": {
+ "duration": 487.06908774375916,
+ "status": "PASSED"
+ },
+ "buildgalculator.GalculatorTest.test_galculator": {
+ "duration": 0.0011870861053466797,
+ "log": "Test requires gtk+3 to be installed",
+ "status": "SKIPPED"
+ },
+ "buildlzip.BuildLzipTest.test_lzip": {
+ "duration": 104.0107638835907,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_help": {
+ "duration": 0.512101411819458,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_running": {
+ "duration": 0.5524864196777344,
+ "status": "PASSED"
+ },
+ "date.DateTest.test_date": {
+ "duration": 8.14045238494873,
+ "status": "PASSED"
+ },
+ "df.DfTest.test_df": {
+ "duration": 0.5919420719146729,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_help": {
+ "duration": 5.937523365020752,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_history": {
+ "duration": 9.723698616027832,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_info": {
+ "duration": 5.838761806488037,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_search": {
+ "duration": 4.5182061195373535,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_version": {
+ "duration": 4.341303110122681,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_exclude": {
+ "duration": 71.60727524757385,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install": {
+ "duration": 32.79348278045654,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_dependency": {
+ "duration": 27.644629955291748,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_disk": {
+ "duration": 33.00733256340027,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_http": {
+ "duration": 27.79077172279358,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot": {
+ "duration": 55.9283504486084,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": {
+ "duration": 0.0009038448333740234,
+ "log": "Test run when enable usrmege",
+ "status": "SKIPPED"
+ },
+ "dnf.DnfRepoTest.test_dnf_makecache": {
+ "duration": 5.428480386734009,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_reinstall": {
+ "duration": 6.290536642074585,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_repoinfo": {
+ "duration": 4.635065078735352,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gcc_compile": {
+ "duration": 3.669914722442627,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp2_compile": {
+ "duration": 4.048281908035278,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp_compile": {
+ "duration": 4.62732720375061,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_make": {
+ "duration": 3.217689037322998,
+ "status": "PASSED"
+ },
+ "gi.GObjectIntrospectionTest.test_python": {
+ "duration": 1.6367218494415283,
+ "status": "PASSED"
+ },
+ "kernelmodule.KernelModuleTest.test_kernel_module": {
+ "duration": 34.1104896068573,
+ "status": "PASSED"
+ },
+ "ldd.LddTest.test_ldd": {
+ "duration": 1.5085337162017822,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_newlog": {
+ "duration": 2.887390613555908,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_wtmp": {
+ "duration": 2.4273853302001953,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTest.test_syslog_running": {
+ "duration": 0.5262484550476074,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_logger": {
+ "duration": 1.9097566604614258,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_restart": {
+ "duration": 1.0898213386535645,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_startup_config": {
+ "duration": 0.0009388923645019531,
+ "log": "Not appropiate for systemd image",
+ "status": "SKIPPED"
+ },
+ "opkg.OpkgRepoTest.test_opkg_install_from_repo": {
+ "duration": 0.0006017684936523438,
+ "log": "Test requires opkg to be installed",
+ "status": "SKIPPED"
+ },
+ "pam.PamBasicTest.test_pam": {
+ "duration": 1.9562301635742188,
+ "status": "PASSED"
+ },
+ "parselogs.ParseLogsTest.test_parselogs": {
+ "duration": 8.781946659088135,
+ "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/harkknott/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/harkknott/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 382, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 2 != 0 : Log: /buildarea4/yzhao1/yocto/harkknott/build-beaglebone-alt/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 0.428279] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.107414] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.107440] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.108845] xor: measuring software checksum speed\n[ 0.199057] arm4regs : 1221.600 MB/sec\n[ 0.299000] 8regs : 905.200 MB/sec\n[ 0.398998] 32regs : 1220.800 MB/sec\n[ 0.399006] xor: using function: arm4regs (1221.600 MB/sec)\n[ 0.399024] pinctrl core: initialized pinctrl subsystem\n[ 0.400241] NET: Registered protocol family 16\n[ 0.402748] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.428279] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.430618] cpuidle: using governor ladder\n[ 0.430655] cpuidle: using governor menu\n[ 0.448050] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.449402] Serial: AMBA PL011 UART driver\n[ 0.629284] raid6: int32x8 gen() 152 MB/s\n[ 0.799508] raid6: int32x8 xor() 102 MB/s\n[ 0.969310] raid6: int32x4 gen() 160 MB/s\n[ 1.139174] raid6: int32x4 xor() 116 MB/s\n[ 1.309078] raid6: int32x2 gen() 286 MB/s\n[ 1.479038] raid6: int32x2 xor() 188 MB/s\n\n***********************\nCentral error: [ 3.327932] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.184679] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.188977] usbcore: registered new interface driver usb-storage\n[ 3.196660] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.216087] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.243902] omap_rtc 44e3e000.rtc: already running\n[ 3.248560] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.253204] i2c /dev entries driver\n[ 3.256850] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.264659] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.272100] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.327932] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.338733] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.345604] usbcore: registered new interface driver usbhid\n[ 3.349969] usbhid: USB HID core driver\n[ 3.352668] mmc0: new high speed SDHC card at address 1234\n[ 3.358207] oprofile: using arm/armv7\n[ 3.361485] mmcblk0: mmc0:1234 SA32G 28.9 GiB \n[ 3.364908] u32 classifier\n[ 3.366319] input device check on\n[ 3.368683] Actions configured\n[ 3.371728] NET: Registered protocol family 10\n\n***********************\n2 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n",
+ "status": "FAILED"
+ },
+ "perl.PerlTest.test_perl_works": {
+ "duration": 0.48191404342651367,
+ "status": "PASSED"
+ },
+ "ping.PingTest.test_ping": {
+ "duration": 0.03166794776916504,
+ "status": "PASSED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectfail": {
+ "duration": 0.0005729198455810547,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectsuccess": {
+ "duration": 0.00041985511779785156,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "python.PythonTest.test_python3": {
+ "duration": 0.6973996162414551,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_help": {
+ "duration": 0.511143684387207,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query": {
+ "duration": 0.9967465400695801,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query_nonroot": {
+ "duration": 6.775110483169556,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": {
+ "duration": 35.907227993011475,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_install": {
+ "duration": 2.9632139205932617,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_remove": {
+ "duration": 1.4051411151885986,
+ "status": "PASSED"
+ },
+ "scp.ScpTest.test_scp_file": {
+ "duration": 2.0371060371398926,
+ "status": "PASSED"
+ },
+ "ssh.SSHTest.test_ssh": {
+ "duration": 1.0014679431915283,
+ "status": "PASSED"
+ },
+ "stap.StapTest.test_stap": {
+ "duration": 243.4387810230255,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_basic": {
+ "duration": 0.49019432067871094,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_failed": {
+ "duration": 1.0276539325714111,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_list": {
+ "duration": 3.9749348163604736,
+ "status": "PASSED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_boot_time": {
+ "duration": 0.5995712280273438,
+ "status": "PASSED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_journal": {
+ "duration": 0.8038022518157959,
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable": {
+ "duration": 6.716372489929199,
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable_ro": {
+ "duration": 0.0005552768707275391,
+ "log": "Test is only meant to run with read-only-rootfs in IMAGE_FEATURES",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_status": {
+ "duration": 0.5418758392333984,
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_stop_start": {
+ "duration": 2.312074661254883,
+ "status": "PASSED"
+ },
+ "weston.WestonTest.test_wayland_info": {
+ "duration": 0.0006110668182373047,
+ "log": "Test requires wayland-utils to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_can_initialize_new_wayland_compositor": {
+ "duration": 0.0004100799560546875,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_running": {
+ "duration": 0.00040030479431152344,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "xorg.XorgTest.test_xorg_running": {
+ "duration": 1.1734611988067627,
+ "status": "PASSED"
+ }
+ }
+ }
+}
\ No newline at end of file |