Age | Commit message (Collapse) | Author |
|
Merge in the changes from master allowing conf.py to use information from
poky.yaml. This allows the head version mapped to X.999 on the website to
have the version information displayed clearly and correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Reviewed-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
Sphinx complains about hardcoded links which can be replaced by an
extlink.
So let's apply its recommendations.
Reported-by: Quentin Schulz <foss+yocto@0leil.net>
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
Also add links for documentation released since 3.3.4.
Signed-off-by: Michael Halstead <mhalstead@linuxfoundation.org>
|
|
The do_patch implementation does not apply patches from an entry in
SRC_URI pointing to a directory.
Remove the claim that this is implemented.
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Reported-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
Using the Bitbake 1.50 references instead of the master ones,
which may break if some variables or sections are removed.
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Reported-by: Quentin Schulz <foss@0leil.net>
|
|
Reported-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
Also add a link for documentation to just released 3.1.11 release.
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Reviewed-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
The following packages where needed to a fresh FC33 install
perl-FindBin
perl-File-Compare
perl-File-Copy
perl-locale
Error seen:
openssl-native-1.1.1g-r0 do_configure: Execution of '/{snipped}/build/tmp-glibc/work/x86_64-linux/openssl-native/1.1.1g-r0/temp/run.do_configure.14627' failed with exit code 2:
Can't locate FindBin.pm in @INC (you may need to install the FindBin module)
[YOCTO #14188]
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Reviewed-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
(cherry picked from commit 5b4127dd72a465ff8c962c425e78140ca8e536db)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Also add a link for documentation to just release 3.1.10 release.
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Include updates to versions for dunfell releases as well.
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Include update to previous releases.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a variable glossary entry and corresponding 3.3 migration
section entry for DISTUTILS_SETUP_PATH.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
|
|
People will see release codenames in other contexts, and thus it is
useful to mention them explicitly here rather than having to go to the
Releases wiki page to map version number to release codename.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
|
|
Add a joining paragraph and fix the second section so that it makes
sense with the addition of the first one.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
|
|
This has been here since the text was added to the DocBook version.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
|
|
Add FIT_KERNEL_COMP_ALG and FIT_KERNEL_COMP_ALG_EXTENSION. Examining
OE-Core commit 5c72105e2973e613b5c0f0e6310ffdea6e56c6c7 and the
associated code, these do not enable arbitrary selection of compression
algorithm - only disabling compression - so document them accordingly.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
|
|
Add a reference to the recently added passwd-expire command in
EXTRA_USERS_PARAMS.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
|
|
Add the recently added python3targetconfig class. Also, we no longer
have the python 2 classes, remove all references to those.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
|
|
Add REQUIRED_VERSION, add a reference to it in PREFERRED_VERSION and
adjust the opening statement to read slightly better.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
|
|
There was an en dash here instead of a hyphen; this meant that the
command line could not be copied and pasted verbatim. (Admittedly that
is less likely here than in other examples, but let's correct it
anyway.)
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
|
|
DISTRO_VERSION snapshot versions use METADATA_REVISION not DATE in
hardknott and thus the default for SDK_VERSION has been updated, so
update it here as well. Additionally, fix the text so it makes sense.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
|
|
Minimum Git, tar, Python and gcc versions are specified in quite a few
different places. Let's add some variables for these so there's no
chance of missing one if they're updated in future. Additionally, for
hardknott the minimum Python version is 3.6 so set that as the value for
Python.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
|
|
These are not new variables, but we are using METADATA_REVISION in a new
place and thus need to refer to it.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
|
|
The top level index file includes a link to the Bitbake
documentation. This link is static, however the location of the
Bitbake documentation depends on the intersphinx configuration. As
such, when looking at an old YP docs release, the link to the bitbake
documentation is always the same (and wrong).
Since we cannot use a cross reference in a toc index, this patch
creates an intermediate page for bitbake documentation, and in that
page we insert the right link to the bibtake documentation
(e.g. :doc:`bitbake:index`) which will be adjusted dynamically based
on intersphinx config.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Tested-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
Anchor links are treated by Sphinx as external links and are not checked
during build, meaning it is impossible to know if a link becomes broken or
not.
As a matter of fact, most of the anchor links replaced in this commit
were actually broken.
The README now states that anchor links are forbidden so that there's no
need to go through such a change later on.
Signed-off-by: Quentin Schulz <foss@0leil.net>
Reviewed-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Reviewed-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
- That could originate from documentation migration issues
- Checked that the corresponding links still exist
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
- Fix an obvious typo
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
- A few style improvements
- Fix a few typos
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
Fix double words, punctuation spacing issues, spacing issues,
"its" instead of "it's", and other trivial issues.
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
Ubuntu has changed packaging and git-core is not available anymore,
it is now just plain git.
$ sudo apt-get install git-core
[sudo] password for jankii01:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'git' instead of 'git-core'
git is already the newest version (1:2.17.1-1ubuntu0.8).
The following package was automatically installed and is no longer required:
linux-hwe-5.4-headers-5.4.0-65
Use 'sudo apt autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 13 not upgraded.
Documentation should match the current package name to avoid confusion/warnings.
Change can be verified by running the following script
set -ex
distros=("debian:8" "debian:9" "debian:10" "ubuntu:16.04" "ubuntu:18.04" "ubuntu:20.04")
for i in "${distros[@]}"
do
folder="${i/:/.}" # change : to .
mkdir -p $folder
cd $folder
echo FROM $i > Dockerfile
echo RUN apt-get update \&\& apt-get install -y git >> Dockerfile
echo
cat Dockerfile
docker build -t test-$folder .
cd ..
rm $folder/Dockerfile
rmdir $folder
done
Signed-off-by: Janne Kiiskila <janne.kiiskila@pelion.com>
Reviewed-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
- Add guidelines for choosing a release
- Check-out a branch instead of a fixed tag
This way it's possible to pull release updates later
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
|
|
Fixes [YOCTO #14307]
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Reported-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
- Spelling fixes found using Emacs' spelling checker
configured for US English
- Fixes for some capitalization issues, especially some
project names (QEMU, openSUSE, BusyBox), that were not
consistently used with the same capitalization anyway.
- A few whitespace fixes too
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Reviewed-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
None of the other distributions install compilers for 32-bit compilation,
and this package isn't available on arm64 Ubuntu systems.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was accidentally missed in the last release update, fix it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating to build 3.2.3 docs and add missing 3.0.4 release line.
Signed-off-by: Michael Halstead <mhalstead@linuxfoundation.org>
|
|
- Minor style and spelling fixes
- Add some extra details; add missing external link macros
and explain where they are defined
- Correct where documentation can be found on the
Yocto Project website: the "Documentation" tab
has been replaced by "Docs" (and it's later
shown as uppercase ("DOCS") by the current CSS, but this
may change one day.
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added documentation on running debuginfod server and using it on the target.
Added the term DEBUGINFOD_URLS definition in ref-manual/variables.rst
Signed-off-by: Dorinda Bassey <dorindabassey@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the "Yocto Project Quick Build" instructions
(https://docs.yoctoproject.org/brief-yoctoprojectqs/index.html#)
there is an inconsistency that impacts several documents...
People are first instructed to clone the poky git repository, but not
mentioning from which directory. Then, it's consistent to instruct
people to run "cd poky/".
However, later in the instructions, readers are instructed to run "cd
~/poky", which assumes that cloning poky was done from the home
directory. Many other places in the documentation make such an assumption.
This change fixes this, and makes no assumption on where people
have chosen to store their data, in particular where they cloned
the "poky" repository.
This also fixes a few whitespace issues.
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Not sure what those leading '\*' are doing, but they're rendered
verbatim and mess up creating a linkable item.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|