| Age | Commit message (Collapse) | Author |
|---|
|
This will produce a more useful hint for those setting
up or testing virgl headless:
runqemu - ERROR - No render nodes found in /dev/dri: ['by-path', 'card0']. If /dev/dri/renderD* is absent due to lack of suitable GPU, 'modprobe vgem' will create one suitable for mesa llvmpipe software renderer.
as qemu itself isn't helpful:
alex@Zen2:/srv/storage/alex/yocto/build-64-alt$ qemu-system-x86_64 -display egl-headless
qemu-system-x86_64: egl: no drm render node available
qemu-system-x86_64: egl: render node init failed
(From OE-Core rev: cbbada6a6c9b0a2e97f7395117dad986555f2db9)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemu doesn't always behave well and can hang too.
kill it with force if it was still alive. Move clean up
commands into cleanup() function.
(From OE-Core rev: 079c2935d2f585ce49e1c7daab2155fcf0094c48)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 759baaceb4dd623d5da12ba0d01540fa080154ba)
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This extra options to be appended to the nfs rootfs options in kernel
boot arg.
Example config with qemuppc64 in machine config:
add r/w size in the nfs rootfs extra option:
QB_NFSROOTFS_EXTRA_OPT = "wsize=524288,rsize=524288"
re-build and runqemu with nfs again, we can observe the kernel command
line added our defined value in QB_NFSROOTFS_EXTRA_OPT:
Kernel command line: root=/dev/nfs nfsroot=10.0.2.2:/home/xchen5/testing/build/tmp-glibc/deploy/images/qemuppc64/testnfs,nfsvers=3,port=3049,tcp,mountport=3048,wsize=524288,rsize=524288 rw mem=256M ip=dhcp console=hvc0 console=hvc0 nohugevmalloc
(From OE-Core rev: 43a97f5bf3f90c5c1fd603f7dca2b3db2c0e3040)
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These enable running custom shell setup and cleanup commands
before and after qemu. Enables machine configurations to for
example run qemu with swtpm to emulate TPM devices.
Example config with meta-tpm2 based swtpm in machine config:
* image recipe depens on swtpm-native to get the native tools to PATH,
same handling as qemu itself
do_testimage[depends] += "swtpm-native:do_populate_sysroot"
* startup commands for swtpm daemon, note that swtpm
socket file has 107 character limit and absolute paths to build environment
will not work
QB_SETUP_CMD = " \
test -d '${IMAGE_BASENAME}_swtpm' || ( mkdir -p '${IMAGE_BASENAME}_swtpm' && \
swtpm_setup --tpmstate '${IMAGE_BASENAME}_swtpm' --tpm2 --pcr-banks sha256 ); \
swtpm socket --tpmstate dir='${IMAGE_BASENAME}_swtpm' \
--ctrl type=unixio,path='${IMAGE_BASENAME}_swtpm/swtpm-sock' \
--log level=40 --tpm2 -t -d \
"
* qemu startup command in machine config is configured enable swtpm device
QB_OPT_APPEND += "-chardev socket,id=chrtpm,path='${IMAGE_BASENAME}_swtpm/swtpm-sock' -tpmdev emulator,id=tpm0,chardev=chrtpm -device tpm-tis-device,tpmdev=tpm0"
* in this case, swtpm daemon stops automatically with qemu machine, but
QB_CLEANUP_CMD could be used to kill a specific process and wipe
temporary files
Now runqemu and testimage.bbclass can be used with swtpm.
(From OE-Core rev: d5c38964a4458aa31ec37810773ecc4f5d410dbe)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather, set it similarly to the overall network config.
(From OE-Core rev: d5e2ef31b151825613b62e58034e81f72526a944)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With default slirp port forwarding config qemu listens on TCP ports
2222 and 2323 on all IP addresses available on the build host. Most
use cases with runqemu only need it for localhost and it is not
safe to run qemu images with root login without password enabled
and listening on all available, possibly Internet reachable network
interfaces. Limit qemu port forwarding to localhost 127.0.0.1 IP
address. Now qemu machine SSH and telnet ports are only
reachable from the build host machine, not full Internet.
If qemu machine needs to be reachable from network, then it can
be enabled via local.conf or machine config variable QB_SLIRP_OPT:
QB_SLIRP_OPT = "-netdev user,id=net0,hostfwd=tcp::2222-:22"
(From OE-Core rev: c6b1e3d50bf2feea80b70a42c6fad868fa9e6042)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of changing the script environment to affect the child
processes, make a copy of the environment with modifications and pass
that to subprocess.
Specifically, when dri rendering is enabled, LD_PRELOAD was being passed
to all processes created by the script which resulted in other commands
(e.g. stty) exiting with a failure like:
/bin/sh: symbol lookup error: sysroots-uninative/x86_64-linux/lib/librt.so.1: undefined symbol: __libc_unwind_link_get, version GLIBC_PRIVATE
Making a copy of the environment fixes this because the LD_PRELOAD is
now only passed to qemu itself.
(From OE-Core rev: 2232599d330bd5f2a9e206b490196569ad855de8)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code to parse arguments was inadvertently skipping all arguments in
the elif block after gl-es if it was specified on the command line.
(From OE-Core rev: 718bb8d56f6a24c86e67830a7d13af54df2ebb4e)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to be able to debug issues on the host that have an impact on the
guest, it is useful to get the uptime of the host while starting so we can
match with the events in dmesg. Also include the uptime when cleaning up.
(From OE-Core rev: 2d96499823f7de6e16a461426491e015ba63c1ec)
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: ee9428611fc38bc711b5b3e12cf0d3257b1b5680)
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
runqemu auto generating the KERNEL_CMDLINE values and specifying using
-append option to qemu boot command which will lead to override the
kernel_cmdline/bootargs which are specified in DTB when using -dtb option.
Add new macro QB_KERNEL_CMDLINE to specify not to add the runqemu
generated KERNEL_CMDLINE values instead use which are in the DTB if
value defined as 'none'.
Add provision to override bootargs using # runqemu bootparams="root=/dev/ram0"
(From OE-Core rev: 98f4bf980c378cc541b220d79ee006bf2fae9ae8)
Signed-off-by: Raju Kumar Pothuraju <raju.kumar-pothuraju@xilinx.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The graphics option auto detection logic added in 7f78bb7a was not
checking if the publicvnc option had been specified, meaning that
it would be ignored and the auto detection result used instead.
Add setting a flag variable in the argument parsing and check
it along with the ones for the other graphics backend options.
(From OE-Core rev: 4b73b55c2d258768cda2bf7262ebb36bcb7fed5b)
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Running "runqemu qemux86 kvm" when qemu is configured for sdl and/or gtk
display output currently leads to a poor user experience with no cursor
and corrupted fonts in the gtk case. This is due to no options being
passed to qemu which leads to the loss of the font envirornment variable
and the show-cursor option.
If the user hasn't specified a display type, grep the output of
"qemu-system-xxx --help" for the display types and pick the "best"
which ensures our config is passed in. That resolves the gtk font issue
and the cursor issue with both sdl and gtk.
(From OE-Core rev: 7f78bb7a7baf67b9226fb460ca9e12fde6ef40c8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When setting memory to 4GB, qemu is only running with 2GB for x86_64.
Avoid this by removing the mem= option to the kernel and letting the
qemu configuration handle it for x86 in a similar way to mips.
(From OE-Core rev: 2fd53417eba354c31c058c4bb066bb882e098add)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Among other things, fix misspellings of:
- absolute
- deprecated
- suitable
- handle
and a bunch of other things.
(From OE-Core rev: c3773cd6c44dfe82be9ecd248120e7d6c753f891)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some of the host distributions build the drivers in a way (RPATH/RUNPATH)
that tricks uninative loader into loading pieces of the host libc, if
the same pieces haven't been previously loaded by native binaries. Mixing
the two libc versions leads to failures.
This change ensures that the correct (uninative) versions are always in use.
(From OE-Core rev: 39c10816d5ec9d9c7952d786d7a3f942d25d0c27)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The wrapper is executed by host bash, and host bash refuses to run
when pseudo libc is preloaded via LD_PRELOAD (which is the case
when gl is enabled).
Only the fontconfig setting is carried over as local testing showed that
only that is necessary for the gui to look ok nowadays; adjust further
if necessary.
(From OE-Core rev: 34f152de14f803fcfe5c92c515bf585838bba10a)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
New systemd is actually parsing this in systemd-network-generator
and fails if it is not fully formed. 'off' means 'static ip, do nothing':
https://www.kernel.org/doc/Documentation/filesystems/nfs/nfsroot.txt
(From OE-Core rev: 2cf12c8dde0f05917797f8b4a80883dc0647b95d)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 282e28bec1419d4e34076234027f34af3a49e7b5)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If runqemu is killed, check that we have a valid PID for the qemu before
sending a kill() to it.
[ YOCTO #14651 ]
(From OE-Core rev: 0f3afbd3a6a6bef668612f818517df7543c0a683)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Optionally allow to set QB_KERNEL_ROOT to e.g. "/dev/vda ro" to mount the
rootfs reay-only in Qemu.
(From OE-Core rev: 448eb1fd21287ba16b17e9402ce040b86ae3638c)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Not all machine definitions need to have SERIAL_CONSOLES defined, but
runqemu currently will fail with the following script error if not
present:
Traceback (most recent call last):
File "/builder/meta-arm/poky/scripts/runqemu", line 1604, in main
config.setup_final()
File "/builder/meta-arm/poky/scripts/runqemu", line 1446, in setup_final
self.setup_serial()
File "/builder/meta-arm/poky/scripts/runqemu", line 1381, in setup_serial
self.kernel_cmdline_script += ' console=%s' %entry.split(';')[1]
IndexError: list index out of range
To get around this issue, add a sanity check to runqemu to avoid the
parsing of SERIAL_CONSOLES if empty.
(From OE-Core rev: e8359000e765f876c041b6ccabe63f069f83efec)
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Correct two issues:
1. Looking for dri.pc is only needed when gl is enabled.
2. virtio-vga-gl works only when gl is enabled via -display,
otherwise virtio-vga needs to be selected.
(From OE-Core rev: d6d5fe44510d2087b735758ac85e804533a1778c)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the ability to replace DEPLOY_DIR_IMAGE with that path in
QB_OPT_APPEND. This allows for anything present in DEPLOY_DIR_IMAGE to
be passed into the qemu parameters. This is especially useful if you
want to run multiple flash images (as -bios only allows for one).
(From OE-Core rev: 1f0bec0421617e8aa9645c385195a755f0d44e75)
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemu 6.1 has (perhaps unintentionally) disabled virgl in -vga virtio:
https://gitlab.com/qemu-project/qemu/-/issues/586
(From OE-Core rev: 2c6c7f0ff24da7060cea35f8ff89f2cabd96f2fb)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is particularly useful for llvm-accelerated GL rendering from qemu guest to
an offscreen buffer (accessible over vnc or spice) using llvmpipe on the
host, rather than using unaccelerated swrast renderer in the guest.
This is the best that can be done in the absence of a host GPU with render node
support (such as old Matrox cards common in servers, or fully virtualized cloud
environments with no GPU at all).
Note: even though NVidia blob drivers do support render nodes, they do not
support gbm (yet?), and so rendering will fall back to llvmpipe as well even when
the system has a 3000 euro NVidia GPU. Cue Linus picture.
(From OE-Core rev: 9b1daa173481f7f560e00e0dc22b4010ff1dc0ec)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This will allow the use of a bios (e.g. U-Boot) in combination with
a WIC file (from which U-Boot loads the kernel).
(From OE-Core rev: 5fc65c9d18679b62b13fead7b91126c665525884)
Signed-off-by: Matthias Klein <matthias@extraklein.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 5cc0051d50974e198313f9513b24fd7ae9a96dd4)
Signed-off-by: Matthias Klein <matthias@extraklein.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The qemu tap device handling is potentially race ridden. We pass the
fd to the main qemu subprocess which is good as it means the lock is held
as long as the qemu process exists. This means we shouldn't unlock it
ourselves though, only close the file. We also can't delete the file
as we have no idea if qemu is still using it. We could try and obtain
an exclusive new lock, then the file would be safe to unlink but it
doesn't seem worth it.
Also fix the same issue in the port lock code.
(From OE-Core rev: 2a87bddabf816d09ec801e33972879e6983627eb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Measure and display the time it takes to copy the rootfs to its new
location (usually in tmpfs) to try to understand whether it sometimes takes
a lot of time on the autobuilders.
(From OE-Core rev: be213114c1349e02ca48fd617a6c3badae8aa101)
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Each of the cores is mapped to a thread on the host, this
should speed up things inside qemu which can take advantage of that.
(From OE-Core rev: 56f98d12a79585a4d4c459160f39403e05b620a5)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to cleanup snapshot files if we make a copy of them to ensure
the tmpfs doesn't run out of space. There is already NFS code needing
this so make it a generic code path.
(From OE-Core rev: a3e0eec5a4785a0c4859455eb10b43aa832e606d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have a working theory that IO queues on the autobuilder are impacting
runtime testing under qemu, particularly async writes which inice does not
influence. We already pass the snapshot option to qemu which copies the
image and runs out of the copy. Add in the ability to copy the image to
a specificed location which can be a tmpfs. This means that writes to the
image would no longer be blocked by other writes to disk in the system.
Preliminary tests show that this does improve the qemu errors at the expense
of sometimes showing qemu startup timeouts as on a loaded system with a large
test image, it can take longer than 120s to copy the image to tmpfs. Having
a most consistent failure mode for loaded tests is probably desireable though.
(From OE-Core rev: fd1c26ab426c3699ffd8082b83d65a84c8eb8bff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some options such as egl-headless are fully compatible with it, so
there is no need to quit.
(From OE-Core rev: 66d11106f9e76d19e397ba3d14c3a22726033567)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Passing 'novga' only adds '-vga none' to the qemu commandline and does
not prevent other vga devices from being added, contrary to the
documentation/help. Clean-up the vga logic and add the ability to
prevent other vga devices from being added.
(From OE-Core rev: 9f8d049dbbe0b1760979d9f3b745124abfc54c90)
Signed-off-by: Jon Mason <jon.mason@arm.com>
Change-Id: I7ff8f9f3e419ce8bae3f3847d75f9275ca30406a
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some platforms do not use ttyS* for their serial consoles (e.g., qemuarm
and qemuarm64). The hardcoding of this can cause issues. Modify
runqemu to use the serial consoles defined in SERIAL_CONSOLES instead of
hardcoding.
(From OE-Core rev: 9dea4cd2f9f46ab3a75562639a22d8f56b4d26af)
Signed-off-by: Jon Mason <jon.mason@arm.com>
Change-Id: I746d56de5669c955c5e29d3ded70c0a4d3171f17
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a new runqemu field for VGA devices. Currently, these are being set
in QB_OPT_APPEND, which can make them difficult to override if importing
the config file into another one.
(From OE-Core rev: 695c98b6522be4373806c154a2999eaeef205556)
Signed-off-by: Jon Mason <jon.mason@arm.com>
Change-Id: I8cb9527954c5b06c083c42fe2466cb3338584b7d
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bin is not an acceptable format for qemu and will throw an error is set.
The correct format in this case is raw.
(From OE-Core rev: cd279aeb986b4676ea8ecb1e7b12c7e29e83460a)
Signed-off-by: Jon Mason <jon.mason@arm.com>
Change-Id: I9d78e356d39ecb15bef886c19870b029d9badd65
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using nographic, explicitly disabling vga is needed some cases
since some qemu firmware (OpenFirmware ) defaults to std vga, and
when vga is enabled then it disables output to serial and redirects
that to vga which is by design, hwoever we expect the console output
to go to serial when using nographic, therefore its important to
disable vga with nographic especially on qemu based ppc platforms
(From OE-Core rev: eabbdb3c4f78ab23348a6b988f59d9d98b5e2c7c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: fafa2fe6d4d40ab6ba7d39b397d2bde9eb0d6b72)
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
RNG passthru has been enabled on all qemu machines but its being added
to each one of them, with this patch its turned into QB variables which
defaults to host passthru, yet it can be overridden if needed via
machine or config metadata if needed.
(From OE-Core rev: 26dd24506ef36088e17f999ce5489dc4b72194e8)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have an issue where qemu is being starved of resources on our autobuilders.
We can't raise its priority without special capacilties, therefore add a hook
which if present can allow this to happen using an executable
"~/runqemu-renice".
(From OE-Core rev: 141a3c9ce93bc3d526303021ecf0460c6e9fea8a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The autobuilder managed to pass the nographic option with "sdl gl" due
to a problem elsewhere. It would have been useful for runqemu to have
errored rather than passing conflicting options to qemu. Add an
error for this invalid usecase.
(From OE-Core rev: 377a6ffbcba0d3c5ede470c989756c4d1636873f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
runqemu help reports that gtk or sdl option is needed with gl or gl-es
option. But if user forgot to add gtk or sdl option, then gl or gl-es
options were silently skipped.
(From OE-Core rev: 4d1e93d4bf013bb0c48032bfda43f77c5aba9ecf)
Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code should check /dev/vhost-net instead of /dev/kvm. And
the permission check logically belongs to the part when kvm-vhost
is enabled. Also fix the URL to point to the correct wiki page.
(From OE-Core rev: 53bdf2d20077921bdf83641c365d60d85174f5b5)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is no way to use runqemu and turn off the no-reboot flag with a
command line argument. If someone really wants it back it can be
added with the qemuparams="" argument.
Also if you use the "halt -p" from user space, the qemu will exit when
it is complete. It is impossible to test self deploying image with
runqemu if you cannot reboot the device. One might argue that you can
run runqemu in a loop, but that defeats the purpose of having a
wrapper around a tool that already does what is needed in the first
place.
For the vmtype images, the -no-reboot flag should not be added.
(From OE-Core rev: 6d07a72356f9a8ea76b6cda9159d3ca4743028d9)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Major update after v4.2.
Changes:
- os_find_datadir() was changed after the v4.2 release
causing v5.0 to not find the bios and not boot the
image. Fix is sent to upstream qemu.
See: qemu/find_datadir.patch
- v5.0 binary had host contamination for dynamically linked
libraries, "--extra-ldflags='${LDFLAGS}'" in EXTRA_OECONF
resolved the issue
- bluetooth code was removed: qemu.git$ git show 1d4ffe8dc7
hence removed PACKAGECONFIG[bluez]
- -show-cursor qemu option is now deprecated, updated
scripts/runqemu to use updated option instead
- added PACKAGECONFIG definitions
- added qemu-ptest to conf/distro/include/ptest-packagelists.inc
- increased support for ARM architecture, cpu and board
- removed patches merged upstream and refreshed
existing ones
Testing:
Build core-image-minimal against the machines in
openembedded-core/meta/conf/machine and succesfully
booted with qemu v5.0
Ran qemu-ptest on x86-64 and arm64 with identical results:
PASS: 1166
SKIP: 0
FAIL: 0
(From OE-Core rev: ee9ec9e344541c1ccd9b9b8e3b8c1e00d008ad85)
Signed-off-by: Sakib Sajal <sakib.sajal@windriver.com>
Signed-off-by: Joe Slater <joe.slater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If libsdl is configured with opengl enabled, it will try to use GL
renderers to open a window even if qemu doesn't use virgl. Setting
the environment variable forces a software X11 renderer, which is the
same one used when libsdl has opengl switched off. This avoids
needlessly loading the GL libraries and drivers from the host.
(From OE-Core rev: 73b75f5ff6c0b5333898fa340f4d9e2e5111fdef)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Falling through to host GL stack via epoxy chrpath hack was
found to be problematic in case of SDL particularly (because it does
not actually use epoxy, and does its own dlopen()).
So let's just use the mesa-native libraries everywhere, but instruct
them to load DRI drivers from the host.
NVidia's proprietary blob users have to take care of themselves, I'm afraid.
(From OE-Core rev: 2125920828eba7bab1afc977d5e9bccb124078e5)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Alexander Kanavin
Mikko Rapeli
Xiaotian Wu
Xiangyu Chen
Joshua Watt
Alexandre Belloni
Mark Hatle
Raju Kumar Pothuraju
Scott Murray
Richard Purdie
Robert P. J. Day
Alexander Kanavin
Ross Burton
Adrian Freihofer
Jon Mason
Matthias Klein
Jon Mason
Khem Raj
Sinan Kaya
Vasyl Vavrychuk
Chen Qi
Jason Wessel
Sakib Sajal