| Age | Commit message (Collapse) | Author |
|---|
|
The do_kernel_configme task is no longer part of SRCTREECOVEREDTASKS,
its been removed from the kernel-yocto.bbclass since b72dbb2e4, but
there wasnt a matching patch for devtool for those changes.
This patch enables us to invoke the do_kernel_configme task when
using a devtool workspace, it also prepends a check for an existing
.config file in the source directory and moves it if thats the case,
since when using devtool modify a .config is created and
do_kernel_configme complains about it, this is not the case when
using bitbake since the .config file would be on B instead.
Alowing do_kernel_configme to run also fixes the flow where testing a
new config fragment from devtool workspace isnt added properly
(config queue shows it as ///frg.cfg) and as a side effect it never
gets merged into the final config.
(From OE-Core rev: b475ba8676c88286185aaafb3ff5217e475ec494)
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alhe@linux.microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 08dcc0e68095dcf2a159546a48b29d40c9aabc0b)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We are getting closer and closer to the year 2038 where the 32 bit
time_t overflow will happen. While products (= embedded systems) with an
expected life time of 15 years are still save the situation may change
if your system has to survive the next 20 years.
ext2 and ext3 filesystems are always affected by the time overflow, so
let's warn the user if these filesystems are still being used.
If ext4 is affected depends on the inode size chosen during filesystem
creation. At least 256 bytes are necessary to be safe. As ext4 is
used very often (and partitions may be created small first and extended
later) this might be an issue for many users.
Some filesystems created during CI runs were already affected by the Y2038
problem. By using `--mkfs-extraopts "-T default"` we tell mke2fs not to
auto-detect the usage type based on the filesystem size. mke2fs will use
the default values for tuning parameters instead. The inode size is one
of these parameters.
(From OE-Core rev: d30283d8090ff21be51433572b7afb542ecea592)
Signed-off-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit eecbe625558406680121d2a7e84917fea45ea9dc)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
files in wic tmp directory can be usefull for debugging, so do not remove
tmp directory when wic create run with debugging mode (-D or --debug).
also update wic.Wic.test_debug_short and wic.Wic.test_debug_long to
check for tmp directory.
[YOCTO#14216]
(From OE-Core rev: 04d334d5bc5353c39c5059d25d97f111a9e368d9)
Signed-off-by: Lee Chee Yang <Chee.Yang.Lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit a122e2418b67d38f691edcf8dd846c167d6b4fa9)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Before adding a npmsw fetcher to a recipe we
should first check if the generated shrinkwrap file
contains dependencies.
(From OE-Core rev: 6bcd2e242ef85cf875a2ea1a7c208f8c30fbdffa)
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit ef153ad36d0299e83a03af8f207686d0d8a238b3)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add relative path if file is under directory.
[YOCTO #13738]
(From OE-Core rev: 19ddacc1b38f9ebb86a9359963ccc3c707f7125e)
(From OE-Core rev: a6a4e1350c6c8170648a9e910b06e6534d11f926)
Signed-off-by: Tomasz Dziendzielski <tomasz.dziendzielski@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 3a220f1e411767cbf9e7099c18d94a12171c1093)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If do_patch task is disabled then prepare do_configure dependencies to
fetch external sources and create symlink to ${S} in devtool workspace.
[YOCTO #13036]
(From OE-Core rev: 9a1bcf47f0242215610ddf917e8bd87e86fdf419)
Signed-off-by: Tomasz Dziendzielski <tomasz.dziendzielski@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 9e47319bfe62d289b90f7545a64dbdc1cbde7f1d)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The fix for [Yocto #13994] required the rootfs directory to be copied
(using hardlinks if possible) when modifying the fstab file under wic.
We can optimise this copy away for filesystems where we have the tools
to modify the contents of the partition image after it is created. For
ext2/3/4 filesystems we have the debugfs tool and for msdos/vfat
filesystems we have the mcopy tool. So for any of these filesystems we
skip the modification of the fstab file in the rootfs directory (and
skip the associated copy unless it is otherwise necessary) and update
the contents of fstab directly in the partition image.
(From OE-Core rev: a56b9dbfeb410d235b5af2c5a846b3f1360d2d1d)
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 5fb8ae0e9159597d7eaa9307a3a8543800bf9405)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default, wic updates the /etc/fstab in the rootfs to include details
of additional partitions described in the selected wks file. If this
modification is performed in place, other tasks which create an image
file from the rootfs directory (e.g. do_image_tar and do_image_ext4)
will pick up the modified fstab file which would not be appropriate for
those images as they do not include the additional partitions described
in the wks file. wic does undo modifications to the fstab file once it
has finished creating the filesystem image, however this leaves open a
race condition if one of the other tasks reads the contents of the fstab
file from the rootfs directory between the point where wic modifies the
fstab file and the point where wic restores the files original content.
This could be solved by adding a lockfile for tasks which use the rootfs
directory to ensure that no other such task is reading the rootfs
directory while do_image_wic is running. This would serialize several
do_image_* tasks and result in slower builds, especially for large
images. Another drawback of this solution is that it is hard to
selectively optimise - adding lockfiles to do_image_* tasks would result
in these tasks always being serialized even if no fstab modification
will take place.
An alternative solution is to copy the rootfs directory when fstab needs
to be modified. The code to do this in wic already exists as it is
needed when including or excluding content in the rootfs. This still
results in an impact on build times but the copy uses hardlinks if
possible (so little data is actually copied) and we can make selective
optimisations to improve things. The rootfs copy will only take place if
fstab modification is required (or if it was already needed to include
or exclude rootfs content). We can also follow up with further
optimisations after this commit. So this second solution is chosen.
Fixes [Yocto #13994]
(From OE-Core rev: 39f98ef8c1f6b0259deb43ea902f5ac8e5b069cd)
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit ce682a73b7447652f898ce1d1d0416a456df5416)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To exclude content from the rootfs, wic makes a copy (using hardlinks if
possible) of the rootfs directory and associated pseudo db, then removes
files & directories as needed. However if these files and directories
are removed using the python functions os.remove and shutil.rmtree, the
copied pseudo db will not be updated correctly. For files copied from
the original rootfs, if hardlinks were used successfully when copying
the rootfs this should mean that the relevant inodes can't be reused and
so the risk of pseudo aborts should be avoided. However, this logic
doesn't apply for directories (as they can't be hardlinked) or for files
added via the '--include-path' argument (as they weren't present in the
original rootfs) and so there remains some risk of inodes being reused
and the pseudo db becoming corrupted.
To fix this, use the 'rm' command under pseudo when removing files &
directories from the copied rootfs to ensure that the copied pseudo db
is updated.
(From OE-Core rev: 9f33aa6f1dd66b1b6990b256ad822fa4cf8daa94)
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit d5db7e268947f0392c2126137571a44acd29ccd6)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows programs from HOSTTOOLS (e.g. 'install', 'rm', 'mv', etc) to
be more easily executed by wic. Without this change only programs from
an actual *-native recipe built by bitbake can be executed by wic.
(From OE-Core rev: 00474d990174c3c4af6e0a6058871f925380750a)
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 8eb186acdecfbb3151c9a0ab148358e3fe5cce39)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a path is specified for the internal wic working directory using
the -w/--workdir argument then it must not already exist. Re-using a
previous workdir could easily result in rootfs and intermediate files
from a previous build being added to the current image.
(From OE-Core rev: 365b10a95ac0b04ca48a53e55cf5a0a330f1bc2f)
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 2e40c8d4109024ff704c5ce40d98050ca7f34dd5)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows the path for the temporary workdir used by wic to be set
when running wic from bitbake or directly from the command line.
(From OE-Core rev: 6136e1312fc69b1b6196aa2fb8986d99ad46e7a1)
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 2e7314ac3a3cab89de93c932e8efc75de0feb0a7)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 9aec2fdda1235f069cbb365634a3f0fcfc846682)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 55618cbd58d6784a82e773f323723be6f722232f)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
vfat/msdos filesystem should have fsuuid in format 0xYYYYYYYY where "0x"
in front follow with 8 hexadecimal number in uppercase. In wic, when using
custom fsuuid for vfat/msdos partition in wks, it is able to set the value
in any length, with or without leading "0x". This can cause fsuuid
missaligned when fstab updates, fstab expect exactly 10 character
fsuuid for vfat/msdos partition and all in uppercase.
if custom fsuuid for vfat/msdos is set, check the length and format,
error if it exceed the format size. Amend it so it is align with format
0xYYYYYYYY. This is done before image create and fstab update to ensure the
fsuuid are same in all followup process. if custom fsuuid length less than
expected, fill in "0".
[YOCTO #14161]
(From OE-Core rev: e71365fe128fe5e7d01232a1da62a3989e0d8eb2)
Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit d9686ae511ef10a504becfd81bfe296b788e1456)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 086584d5e60bc7daec914ab4384fdda776f27103)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit e7076f1742bb83e76aa4e90aad861546536166cf)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If nothing else is specified, 'git init' uses its default repository
template from the install location (e.g. /usr/share/git-core/templates),
which already includes an info/ subdirectory. However, when setting
init.templateDir to a different template path in ~/.gitconfig, this
isn't necessarily the case, and it can lead to setup_git_repo() failing
with stack traces like:
File: '.../scripts/lib/devtool/__init__.py', lineno: 234, function: setup_git_repo
0230: pass
0231: if 'singletask.lock\n' not in excludes:
0232: excludes.append('singletask.lock\n')
0233: bb.warn("try writing excludefile")
*** 0234: with open(excludefile, 'w') as f:
0235: for line in excludes:
0236: f.write(line)
0237:
0238: bb.process.run('git checkout -b %s' % devbranch, cwd=repodir)
Exception: FileNotFoundError: [Errno 2] No such file or directory: '.../devtooltmp-6m36b181/workdir/foobar-1.0.1/.git/info/exclude'
Fix this edge case by creating the .git/info/ directory first.
Fixes: 334ba846c795fc0d8c73 (2018-02-01, "devtool: set up git repos so that singletask.lock is ignored")
(From OE-Core rev: 148a23e4d5ceaf655ccacb52deca4ba501f12975)
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This variable isn't used at all.
(From OE-Core rev: 9676ee24d190b144cb50be6ebde3990644a6df2a)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adjust wic to correctly handle the new PSEUDO_IGNORE_PATH variable and avoid
inode corruption issues.
(From OE-Core rev: 13500f5234361385c365c7c35e83f99435500481)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
and bootimg-partition
Due to recent changes in bootimg-efi to include IMAGE_BOOT_FILES,
when both bootimg-partition and bootimg-efi occur in a single .wks
and IMAGE_BOOT_FILES are defined, files listed in IMAGE_BOOT_FILES
will be duplicated in both partition.
Since IMAGE_BOOT_FILES are crucial for bootimg-partition, but
optional for bootimg-efi, hence allowing bootimg-efi to have the option
to ignore it.
The new variable, IMAGE_EFI_BOOT_FILES, was added to help handle this
issue. Its basic usage is the same as IMAGE_BOOT_FILES.
Usage example:
${IMGDEPLOYDIR}/${IMAGE_BASENAME}-${MACHINE}.ext4;rootfs.img \
This commit is also squashed with the updated testcase to cover for
this change.
[YOCTO #14011]
(From OE-Core rev: 945339e06b273df1935cfd784f548ef57e0b7f4c)
Signed-off-by: Khairul Rohaizzat Jamaluddin <khairul.rohaizzat.jamaluddin@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a package contains hard links to a file, the file size is added for
each hard link instead of once for the file. Therefore, the calculated
size may be much larger than the actual package size.
For example, the mesa-megadriver package contains several hard links to
the same library.
Keep track of the inode numbers when listing the files that are
installed and use the actual size only for the first occurrence of an
inode. All further hard links to the same inode are added to the file
list, but accounted with size 0.
All file names need to be added to the file list, because the list is
used for preserving the files/hard links on the target.
(From OE-Core rev: 17e92572278980d1a7f06de9d72c68baf57698f1)
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
/bin is also a valid path where one can find executables. Add
that to the search path.
(From OE-Core rev: ca0a6025351cb2135e87cecf828633cf12aa34c6)
Signed-off-by: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* I have recipes which use variable inside SRC_URI, e.g.:
ROS_BRANCH ?= "branch=release/melodic/swri_nodelet"
SRC_URI = "git://github.com/swri-robotics-gbp/marti_common-release;${ROS_BRANCH};protocol=https"
and devtool modify works fine, but devtool finish fails with:
$ devtool finish --force-patch-refresh swri-nodelet meta-ros/meta-ros1-melodic/
...
Traceback (most recent call last):
File "/OE/openembedded-core/scripts/devtool", line 334, in <module>
ret = main()
File "/OE/openembedded-core/scripts/devtool", line 321, in main
ret = args.func(args, config, basepath, workspace)
File "/OE/openembedded-core/scripts/lib/devtool/standard.py", line 2082, in finish
updated, appendfile, removed = _update_recipe(args.recipename, workspace, rd, args.mode, appendlayerdir, wildcard_version=True, no_remove=False, no_report_remove=removing_original, initial_rev=args.initial_rev, dry_run_outdir=dry_run_outdir, no_overrides=args.no_overrides, force_patch_refresh=args.force_patch_refresh)
File "/OE/openembedded-core/scripts/lib/devtool/standard.py", line 1737, in _update_recipe
mode = _guess_recipe_update_mode(srctree, rd)
File "/OE/openembedded-core/scripts/lib/devtool/standard.py", line 1721, in _guess_recipe_update_mode
params = bb.fetch.decodeurl(uri)[5]
File "/OE/bitbake/lib/bb/fetch2/__init__.py", line 390, in decodeurl
raise MalformedUrl(url, "The URL: '%s' is invalid: parameter %s does not specify a value (missing '=')" % (url, s))
bb.fetch2.MalformedUrl: The URL: 'git://github.com/swri-robotics-gbp/marti_common-release;${ROS_BRANCH};protocol=https' is invalid: parameter ${ROS_BRANCH} does not specify a value (missing '=')
let it expand the SRC_URI before trying to decode it.
(From OE-Core rev: 3535cfdbf3d77f550b804276f957acf859da484f)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allows the --offset argument to use the "s" or "S" suffix to specify
that it is reporting the number of 512 byte sectors.
This is required for some SoCs where the mask ROM looks for an item at a
sector that isn't aligned to a 1KB boundary.
(From OE-Core rev: 938595d1dc4abaf5f7f3a7900add3f0492b805d0)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 9ab4c4571d899d2eefcd2fc53af0851863f29008)
Signed-off-by: Daniel Ammann <daniel.ammann@bytesatwork.ch>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
layer under test should absent from BBLAYERS when running
yocto-check-layer. This allow to get signatures before layer
under test. There are existing steps to add the layer under
test to BBLAYERS after getting initial signatures.
add steps to check for layer under test in BBLAYERS before
running any test, skip test for the layer if the layer under
test exist in BBLAYERS.
[YOCTO #13176]
(From OE-Core rev: be02e8dbfb0d1decce125322f9f1e11a649756c0)
Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
List of files defined using IMAGE_BOOT_FILES are installed into
the boot partition when preparing an image using the wic tool with
the bootimg-efi source plugin.
The code snippet introduced is taken as is from bootimg-partition.py
Change-Id: I8dbb6b4e7c24870f587a6f31e6ae4a87d7033782
Issue-Id: PLATFORMS-3134
(From OE-Core rev: a44ab3a4ee5b3c57812909c6194456f299d6ba7f)
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For some filesystems, such as aufs which may be used by docker container,
don't support either the SEEK_DATA/HOLE or FIEMAP to get the block
map. So add a FileNobmap class to fall back to standard copy when there
is no way to get the block map.
[Yocto #12988]
(From OE-Core rev: 7934ed49179242f15b413c0275040a3bb6b68876)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This method is not used by any code, so drop it.
(From OE-Core rev: 6513fd9302b9989f97fc9d95e76e06ad5d266774)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This method is not used by any code, so drop it.
(From OE-Core rev: fb62a15349597ee026c67a0bb0a6ca2cc9bfe420)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Python now expects regex strings to be prepended with r.
Silence pylint/autopep8 and similar warnings by identifying
these regex patterns as... regex patterns.
(From OE-Core rev: 0eae98a369d80340e48dc690d09a1364cde97973)
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[Bug 13971] https://bugzilla.yoctoproject.org/show_bug.cgi?id=13971
A recipe using LICENSE=CLOSED would normally not have LIC_FILES_CHKSUM
set.
If LIC_FILES_CHKSUM was not set, it would cause `devtool upgrade` to fail.
This fixes the issue by defaulting to an empty string if
LIC_FILES_CHKSUM is not found.
[YOCTO #13971]
(From OE-Core rev: 95e112f0f465868e98285509ea0d1a624a439ac2)
Signed-off-by: Bjarne Michelsen <bjarne_michelsen@hotmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
LAYERDEPENDS is a string of this format:
"DEPEND1 (optional version) DEPEND2 (optional version) ..."
However when we parse LAYERDEPENDS in _get_layer_collections() we
parse it as a simple string, and if any optional versions are there the
'depends' field is wrong. For example, running yocto-check-layer
might result in such errors:
ERROR: Layer meta-python depends on (>= and isn't found.
ERROR: Layer meta-python depends on 12) and isn't found.
Let's use bb.utils.explode_dep_versions2() to parse LAYERDEPENDS, and
create a string that contains all dependencies, effectively
skipping/ignoring any optional versions.
[YOCTO #13957]
(From OE-Core rev: f81f07afc200fe06c5c06ea81a4f8a3a43436faf)
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
specifiy -> specify
(From OE-Core rev: 194555aae3f1f10468c1800c93bd17c54ce217c8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When explicitly passing a branch using --srcbranch in 'devtool add' or
'recipetool create', the branch name is not included in the params of
bb.fetch2.encodeurl and default 'master' branch is used instead.
(From OE-Core rev: 0424df825f1e509faf6cd44403c0736bb91b57c3)
Signed-off-by: Tuomas Salokanto <tuomas.salokanto@gmail.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The error message was reporting the calculated offset instead of the
current offset, which made it confusing.
(From OE-Core rev: 2be775cfe1b49ce3889b5dc326e2b67a9667f18a)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If there are multiple appends, ensure we concatenate compatible things:
Traceback (most recent call last):
File "/home/akiernan/poky/scripts/recipetool", line 111, in <module>
ret = main()
File "/home/akiernan/poky/scripts/recipetool", line 100, in main
ret = args.func(args)
File "/home/akiernan/poky/scripts/lib/recipetool/edit.py", line 38, in edit
return scriptutils.run_editor([recipe_path] + appends, logger)
TypeError: can only concatenate list (not "tuple") to list
(From OE-Core rev: 4c1e74bdf4922519d168434afd69c9bebcb9bd82)
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
467f84e12b ("wic: Add --offset argument for partitions") broke the
--extra-space argument handling in wic. Fix the option and add a unit
test for the argument.
(From OE-Core rev: 87722a92c18f94917c8f70afc8cd0763462a5c25)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for an --offset argument when defining a partition. Many
SoCs require that boot partitions be located at specific offsets. Prior
to this argument, most WKS files were using the --align attribute to
specify the location of these fixed partitions but this is not ideal
because in the event that the partition couldn't be placed in the
specified location, wic would move it to the next sector with that
alignment, often preventing the device from booting. Unlike the --align
argument, wic will fail if a partition cannot be placed at the exact
offset specified with --offset.
Changes in V2:
* Fixed a small typo that prevented test_fixed_size_error from passing
(From OE-Core rev: 467f84e12b96bc977d57575023517dd6f8ef7f29)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* I see a case where a tarball contains .gitignore and bunch of files
which are normally ignored in git, but still included in the tarball
(e.g. configure script next to configure.ac)
* when devtool is creating a git repo in workspace it won't include these
files from tarball in the initial devtool-base commit, because
git ls-files won't list them
* but then the first .patch file (without git headers) when applied with
GitApplyTree._applypatch() will add all these still ignored files to a
commit which used to only modify some files, because it's using -f:
# Add all files
shellcmd = ["git", "add", "-f", "-A", "."]
output += runcmd(["sh", "-c", " ".join(shellcmd)], self.dir)
at least in this case it would be better to add all ignored files in
the initial devtool-base commit and then --force-patch-refresh will just
include the small modification as before instead of adding unrelated
files, just because they were initially ignored - this behavior will
also match with the do_patch task in the actual build where the
.gitignore is ignored when unpacking some tarball
* my use-case is fixed in setup_git_repo, but similar function is in
devtool upgrade, I've changed it there as well
(From OE-Core rev: 06a24a615549af3550302a56ea08147000a608f3)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently only ptest logs are accessible with the log command, this
adds support so the ltp logs can be extracted too.
(From OE-Core rev: 64a2121a875ce128959ee0a62e310d5f91f87b0d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I've long since wondered why there was some odd output in result reports,
remove the leftover debug which was causing it.
(From OE-Core rev: 66e96bf70753933714ff8edcc13a1f35a052656f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As in other places in the file, skip layers that don't define a
collection when searching for a layer to resolve a dependency. Fixes
KeyError exceptions when attempting to access the layer collections
later
(From OE-Core rev: 26090a2861ebe21224aaf89d7be0c0a89ca58e48)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This will drop them md5sums from recipes that still have them,
and will not re-add them for recipes where they're already
removed.
[RP: Added fix for the test recipe]
(From OE-Core rev: 1609e77a4db04a4c01cbbff17261cd57e8f816ee)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Combine all the common path validation in a function to avoid code
duplication.
Cc: Paul Barker <pbarker@konsulko.com>
(From OE-Core rev: ebd12b10d17db0b4176b0188407d7e9b8420eab1)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow specifying an optional destination to include-path and make the
option aware of permissions and owners.
It is very useful for making a partition that contains the rootfs for a
host and a target Eg:
/ -> Roofs for the host
/export/ -> Rootfs for the target (which will netboot)
Although today we support making a partition for "/export" this might
not be compatible with some upgrade systems, or we might be limited by
the number of partitions.
With this patch we can use something like:
part / --source rootfs --fstype=ext4 --include-path core-image-minimal-mtdutils export/ --include-path hello
on the .wks file.
Cc: Paul Barker <pbarker@konsulko.com>
(From OE-Core rev: e8c21c6ebaebde88151697381bdb2452f1171090)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Executables like tar won't be available on the native sysroot, as they
are part of the ASSUME_PROVIDED variable.
Cc: Paul Barker <pbarker@konsulko.com>
(From OE-Core rev: 2f574d535f8665b26dab65c14668cf8fc7b751c0)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the source of the rootfs is not a bitbake cooked image, or it is not
pointing to the root of one, we call pseudo again, which will produce
a new pseudo folder at rootfs/../pseudo
Eg:
part /etc --source rootfs --rootfs-dir=${IMAGE_ROOTFS}/home --fstype=ext4
Cc: Paul Barker <pbarker@konsulko.com>
(From OE-Core rev: 799a24ae78655f7a3eda7456b1a0ffaf3e43ec16)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If an excuded path does not exist, continue without an error.
This allows to seamleasly reuse .wks among different projects.
Eg:
part / --source rootfs --fstype=ext4 --exclude-path=opt/private_keys
Where /opt/private_keys in only populated by some of the image.bb files.
Cc: Paul Barker <pbarker@konsulko.com>
(From OE-Core rev: 2dbd692b8e563cf991fb4ae1ef6129fda0d7e3c4)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This option allows to specify which part of a rootfs is going to be
included, the same way the -C argument on tar.
Thanks to this option we can make sure the permissions and usernames
on the target partition are respected, and also simplify the creation of
splitted partitons, not neeting to invoke external vars or using .wks.in
files. Eg:
part / --source rootfs --ondisk sda --fstype=ext4 --exclude-path=etc/
part /etc --source rootfs --fstype=ext4 --change-directory=etc
Cc: Paul Barker <pbarker@konsulko.com>
(From OE-Core rev: 2265d089a58e1f78f26d623ee667c420cb1c3bd4)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to support .wks files with multiple images inside bitbake we
need to explicitly set the pseudo database in use.
Eg: If we try this .mks:
part / --source rootfs --ondisk sda --fstype=ext4
part /export --source rootfs --rootfs=core-image-minimal-mtdutils --fstype=ext4
The username for all the files under /export will be set to the runner
of bitbake (usually UID 1000).
Before we run wic, we need to make sure that the pseudo database will be
flushed, and contains all the data needed.
Cc: Paul Barker <pbarker@konsulko.com>
(From OE-Core rev: dde90a5dd2b22a539095d1bac82acc15c6380ac8)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Alejandro Hernandez Samaniego
Florian Bezdeka
Lee Chee Yang
Kamel Bouhara
Tomasz Dziendzielski
Paul Barker
Peter Kjellerstedt
Alexander Kanavin
Roland Hieber
Ross Burton
Richard Purdie
Khairul Rohaizzat Jamaluddin
Michael Tretter
Vijai Kumar K
Martin Jansa
Joshua Watt
Daniel Ammann
Khasim Mohammed
Kevin Hao
Tim Orling
Bjarne Michelsen
Nicolas Dechesne
Paul Eggleton
Tuomas Salokanto
Alex Kiernan
Ricardo Ribalda Delgado