| Age | Commit message (Collapse) | Author |
|---|
|
(From OE-Core rev: 6523113a547042fc34110835fb658ee064d84a5f)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The source is no longer available from the original URL.
(From OE-Core rev: 502b0d1f68ad7668df153d3cfb8ca35f02313c1e)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Conditionally add 'xz/bz2/gzip' to info/man's RDEPENDS
according to DOC_COMPRESS.
[YOCTO #6750]
[YOCTO #6751]
(From OE-Core rev: 610220a95f9ef78590acb1b8f18abc984464da96)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While doc compress enabled, ther is a QA issue:
...
ERROR: QA Issue: texinfo: Files/directories were installed but not shipped
/usr/share/info/info.info.bz2
/usr/share/info/info-stnd.info.bz2 [installed-vs-shipped]
...
(From OE-Core rev: c550cafa29b8621ef20481c873c5658f9ff6a602)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Git perl tools such as add--interactive load the Git module at runtime.
A previous patch to eliminate a QA error by deleting it instead of
packaging it was incorrect.
beaglebone[62]$ git add -i
Can't locate Git.pm in @INC (you may need to install the Git module) (@INC contains: /usr/lib/perl/5.20.0 /prj/pab/Utils/lib/perl5/linux-arm/5.020000 /prj/pab/Utils/lib/perl5/ /prj/pab/Utils/lib/perl5/site_perl/linux-arm /prj/pab/Utils/lib/perl5/site_perl /etc/perl /usr/lib/perl/site_perl/5.20.0/ /usr/lib/perl/site_perl/5.20.0 /usr/lib/perl/vendor_perl/5.20.0/ /usr/lib/perl/vendor_perl/5.20.0 /usr/lib/perl/5.20.0/ /usr/local/lib/site_perl .) at /usr/lib/git/git-core/git-add--interactive line 7.
BEGIN failed--compilation aborted at /usr/lib/git/git-core/git-add--interactive line 7.
[YOCTO#3780]
(From OE-Core rev: 804f8e650f433d00907ec04282c22aaff2e5c044)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 65c97d4abd26f38917cd89b5f50f7299221b2123)
Signed-off-by: Lucian Musat <georgex.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update the sstate file's timestamps after it is installed, it will be
very useful for removing the old sstate file, especially, it's not easy
to remove when use the shared SSTATE_DIR, we can easily remove them with
this change, for example:
$ find state-cache -type f -ctime +10 -exec rm -f {} \;
Will remove the sstate file which isn't used by recent 10 days.
We can use the -atime, but it is not always available, for example,
when mounted with "-o noatime".
The touch is a very light weight action, and the
scripts/sstate-cache-management.sh also requires this.
(From OE-Core rev: bbee747466a6947319cff2ffd676abf9432c16ae)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Pinentry is needed for most function of GnuPG, so add it into RRECOMMENDS
(From OE-Core rev: dc274b6325cfc6b78d51c97445b1af445ccfed93)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gnupg 2.x.x needs pinentry to work
(From OE-Core rev: af893d747f3ee7894b2b444cf75024757f389742)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We should use ${PN} instead of hardcoding 'dhcp' for SYSTEMD_SERVICES,
otherwise we would have 'installed-not-shipped' QA error if we are building
lib32-dhcp.
(From OE-Core rev: c3a152f946f7cb1666384fd7a214f883cbaecb56)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As this recipe inherits allarch, it makes no real difference whether
we are using ${PN} or 'volatile-binds'. But using ${PN} would keep
the same style with the other recipes in OE.
(From OE-Core rev: 708cc039b6cc891e466e89d2b10fcdea6c19287c)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We should use ${PN} instead of 'acpid' for SYSTEMD_SERVICE, otherwise
we would have the 'installed-not-shipped' QA error if multilib is enabled
and we run `bitbake lib32-acpid'.
(From OE-Core rev: f8217853c69cf06c92b2f3885f7d49851213188f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When a user takes coverage in gcc of SDK, it becomes the link error in SDK
because there is not libgcov.
----
ld: cannot find -lgcov
collect2: error: ld returned 1 exit status
----
(From OE-Core rev: 99b26dba6e4f5a64579f183883265498000e3104)
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 103ded50380916d210e293913eebb173f014063e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fix allows the correct appending of -L to syslogd arguments when both file and remote logging are selected.
(From OE-Core rev: ca68019760de6c5d5401be8eae7e65e7e6ca9021)
Signed-off-by: Michael Gloff <mgloff@emacinc.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The qtdemo can't launch via qtdemo-init initscript. Fix it.
(From OE-Core rev: bdd7a07db6b41c6c87c272d410af63c2d0251fc8)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, perf can't split to perf-archive, perf-tests, perf-python and
perf-perl. All files are included in perf package. Change the perfexecdir
variable to make split successfull. Add python to RDEPENDS_perf-tests.
(From OE-Core rev: 32fcc621401e7761d9b96bc5b7bef143c1c29695)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There's not bash specific syntax in the xtests scripts:
$ cd Linux-PAM-1.1.6/xtests
# replace /bin/bash to /bin/sh and check the bashisms:
$ checkbashisms *.sh
No output
So the runtime dependency to bash could be removed.
(From OE-Core rev: 1917bf7aa74aa1b86756c73c56537db2591115e5)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On x86, EMMINTRIN is defined but not usable without SSE so check for
__SSE__ and __SSE2__ as well.
(From OE-Core rev: 556a19423d15c7c13f60d57528a3b880f95750b9)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed when build with meta-selinux even with --without-selinux:
runcon.c:49:28: fatal error: selinux/flask.h: No such file or directory
# include <selinux/flask.h>
^
compilation terminated.
(From OE-Core rev: d52a606c8a75496f3b7239adc19fdb66e3ae576a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The tmpfiles configuration in systemd unconditionally creates a symlink
from /etc/resolv.conf to the location where systemd's resolved service
will place the real file. This link is only appropriate when resolved
is enabled and running: its presence prevents connman or other systems
from providing a working resolv.conf when systemd is not assigned that
responsibility. OE has not yet enabled systemd's networkd or resolved
by default.
There is a TODO in the systemd source to fix this, but it has not been
addressed upstream. This patch comments out the corresponding line when
resolved is not enabled in the package configuration.
(From OE-Core rev: 7e2b05a6f59209687829225878a19a1dad8143b9)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When files overlap in the sysroot, something bad usually happened. We've had
two independent cases recently where a couple of months after one of these
warnings was shown, builds failed due to corruption.
This change moves the warning to become a fatal error. The complaint I've had
about this is that we need to tell the user what happened and more importantly
how to recover from it. If we could recover from it, great but the trouble is
we simply don't know what happened.
As a compromise, we can document several of the possible scenarios in the error
message. We don't normally go to this level of detail however in this case, I'm
lacking other viable alternatives.
I do believe it is important to stop as corruption occurs rather than letting the
build contunue into territory that is not deterministic amongst other things.
The complex message is followed by a simpler one in case the long message is too
much for the user.
(From OE-Core rev: 179ac7de03977b6e440409eddb2166819e07286a)
(From OE-Core rev: 4b503f25f1ef8f554d3c76d88399db379dc818cc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: e6c6d3fcfd2faf867e8145d25c1ba197fb9ee6b5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: b4e2a769e8def2e78ffca3f006a0cc88407aaeda)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently linux-firmware rebuilds for each machine due to its usage of
update-alternatives which in turn means a dependency on opkg-utils.
Marking opkg-utils as ABISAFE is the only option we have right now
to avoid this.
(From OE-Core rev: 6829c0e161c4a8cde6624f211865922fce62d4fa)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Taking run-postinsts and building for two machines which have different
OVERRIDES leads to two different sets of stamps for an allarch package.
We don't need to depend on OVERRIDES in these classes, the end resulting
variables are good enough. We can therefore exclude the dependency
and allow a single package to be generated for run-postinsts.
(From OE-Core rev: fdc949154e64afb41dd4db3a97be74a15963128d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently allarch recipes using useradd rebuild each time MACHINE
changes which is not desireable. Adding the useradd dependencies
to this list ensures they do not change under these circumstances.
(From OE-Core rev: 7743a309017f0fb9286f00b1f6f546ee95c05303)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In oe-core, bunzip and unzx located in /usr/bin/
rather than /usr, so tweak man's config.
[YOCTO #6750]
(From OE-Core rev: a8f07626d627b49913835778cc8039accd8b9896)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #6748]
replace "nobody" group with "nogroup", since the user "nobody"
belongs to "nogroup" group and no "nobody" group in oe-core
(From OE-Core rev: 3fc1b5acb50aa864d386f69a1c0d0db0425f970c)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libvirt is automatically linked to if present, this undetermined
dependency may cause build errors like:
../lib/libvirt.so: undefined reference to `libssh2_channel_open_ex'
../lib/libvirt.so: undefined reference to `libssh2_session_hostkey'
...
Both libvirt and libssh2 are not oe-core recipes for now, just disable
libvirt to fix this issue.
(From OE-Core rev: 815b44914eb30b86dfce0e81ffda7884e0efcc34)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Document IMAGE_BOOT_FILES variable.
(From OE-Core rev: 8007f41aa824db2ee681d9dd98a0b06f44fc9d6d)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These patches are the start of a new idea, a way of allowing a single set of
cross/native sstate to work over mutliple distros, even old ones.
The assumption is that our own C library is basically up to date. We build
and share a small tarball (~2MB) of a prebuilt copy of this along with a
patchelf binary (which sadly is C++ based so libstdc++ is in there). This
tarball can be generated from our usual SDK generation process through
the supplied recipe, uninative-tarball.
At the start of the build, if its not been extracted into the sysroot, this
tarball is extracted there and configured for the specified path.
When we install binaries from a "uninative" sstate feed, we change the
dynamic loader to point at this dynamic loader and C librbary. This works
exactly the same way as our relocatable SDK does. The only real difference
is a switch to use patchelf, so even if the interpreter section is too small,
it can still adjust the binary.
Right now this implements a working proof of concept. If you build the tarball
and place it at the head of the tree (in COREBASE), you can run a build from
sstate and successfully build packages and construct images.
There is some improvement needed, its hardcoded for x86_64 right now, its trivial
to add 32 bit support too. The tarball isn't fetched right now, there is just a
harcoded path assumption and there is no error handling. I haven't figured
out the best delivery mechanism for that yet. BuildStarted is probably not
the right event to hook on either.
I've merged this to illustrate how with a small change, we might make the
native/cross sstate much more reusable and hence improve the accessibility
of lower overhead builds. With this change, its possible the Yocto Project may
be able to support a configured sstate mirror out the box. This also has
positive implications for our developer workflow/SDK improvements.
(From OE-Core rev: e66c96ae9c7ba21ebd04a4807390f0031238a85a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
irda-utils doesn't use autotools, so don't inherit it.
(From OE-Core rev: d5e2a59ab59e3d67d09c5f25b8623186af855e17)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating to the latest korg -stable update.
(From OE-Core rev: 7212dcb3a67b9a9b844b74e997d2e3ea7902555f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating to the latest korg -stable update.
(From OE-Core rev: 9745ffc0ae25be980d92f195937cef6d1f406ab2)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating the 3.17 recipe to -rc6. This is nearly the release kernel, and should
have very few changes aftert this point.
(From OE-Core rev: 845e01d906982c2147828b97129e95e8a79dce7c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 3.17 repository is ready, so we no longer need to reuse the
linux-yocto-dev tree.
(From OE-Core rev: c304674833360e0e2dceca3ebeb535025597e46f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bumping the SRCREVs to import the latest korg -rc.
(From OE-Core rev: 8ae153f7da3244c3dd24cc5dbd722af26624201b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Refreshing the 3.14 kernel to a new korg stable and -rt release.
(From OE-Core rev: 91204afeb508ae21f8f2a32c340ec85efbf33fd0)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 3.10 kernel needed a refresh to the latest -stable and -rt releases.
(From OE-Core rev: c7360e9e72f06dab2617e16ae546f4d8e5262fa1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: ea393e90055ea13b0c5a6950dbd388e826a66623)
Signed-off-by: Lucian Musat <georgex.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: dd5313228879487ca2b11fc5d38fb821a2a810a5)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 71525643909ac765e6b6a4b419cddae7d5812a8d)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently we have the horrible situation where meta-environment packages
the toolchain environment files and they get included in the SDK but are
broken, then, the SDK code overwrites them with good versions. This is
suboptimal.
This change fixes the code in meta-environment to create working
files and adds in the multilib support from populate_sdk_base, then
we remove the code in that base bbclass and rely on the packages
being installed if/as/when needed. This removes the duplication
and the broken versions of the files, hopefully making all well.
[YOCTO #6608]
[YOCTO #6613]
(From OE-Core rev: 063355e5965439c7b3253d692d7ab0ed1189d123)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Due to the use of the cross-canadian inherit, TARGET_OS can be reset to
values other than the correct one, leading to generation of the wrong
files.
By expanding REAL_MULTIMACH_TARGET_SYS before the inherit, the correct
OS value is preserved and we generate the right environment files.
[YOCTO #6608]
[YOCTO #6613]
(From OE-Core rev: ae265973c96ff4b8b5580436647fc361490e134c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libssh2 is automatically linked to if present, this undetermined
dependency may cause build errors like:
.../x86_64-poky-linux/4.9.0/ld: cannot find -lssh2
libssh2 isn't an oe-core recipe, disable it for now.
(From OE-Core rev: 0cc59247ece1ea134d060d3ff064b5561972a92b)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The perl patches have been copied to ptest directory and these patches in
target rootfs are linked to build dir. The ptest of perl doesn't need these
patches, so remove them from target.
(From OE-Core rev: 1982095255917befd93ed14f9abc1f9fc4149f99)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 7191b6b7503a5a17f93bd61283f22d409c5cb17b)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While we're at it, also switch to explicit variable passing rather than
relying on make -e, and pass V=1 so the actual commands hit the logs.
(From OE-Core rev: 7106f840b7d2a71171131c3c3e5fc311718ca718)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 43be08bbfc3fd7ae2a8143ccd5d51d48394f4e77)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Jonathan Liu
Hongxu Jia
Peter A. Bigot
Lucian Musat
Robert Yang
Roy Li
Chen Qi
Nobuhiro Iwamatsu
Ross Burton
Michael Gloff
Yi Zhao
Chong Lu
Wenzong Fan
Jackie Huang
Richard Purdie
Maciej Borzecki
Bruce Ashfield
Carlos Rafael Giani
Denys Dmytriyenko
Christopher Larson