| Age | Commit message (Collapse) | Author |
|---|
|
We need to have about 40G to do a full sato build even with rm_work enabled
Add sudo priveleges inorder to allow the builder user to setup the tap/tun
devices needed by runqemu
(From OE-Core rev: 3e4562500956550dbae5467a5fe9289f1d32f775)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update the experimental SH tunings to match the tunings README.
These tunings have not been tested, and are experimental!
(From OE-Core rev: 603a15bf4c838e4b6352e31f70a958d93f91138f)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Cleanup the ARM tunings to match the new tunings README file.
The ARM tunings define TUNE_PKGARCH in a way that only one main
arm architecture, i.e. armv6, may be defined at the same time. We
may have to revise these settings in the future, as well as figure
out a way to better differentiate various optimize tunings in the
package arch. (This was not done, to preserve existing behavior!)
Fix a number of minor issues w/ the armv5 tunings where DSP variants
were referenced but not defined.
Fix incorrect armv7 entries in armv7a.
Fix PACKAGE_EXTRA_ARCHS definitions inside of tune-cortexm3 and tune-cortexr4.
(From OE-Core rev: 0e71abea5458122188d5eddef2c17147f61ff895)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Cleanup the PowerPC tunings to match the new tuning README file.
Default PowerPC to using TUNE_PKGARCH = ${TUNE_PKGARCH_tune-<tune>}
Fix AVAILTUNE settings in ppc603e, and ppce500mc to be addative.
Correct potentially overlapping "spe" definitions in ppce500 and ppce500v2.
(From OE-Core rev: f81f71bcff4bb1032b034b068efe6065113ca9e7)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Cleanup the MIPS tunings to match the new tuning README file. Also
add a MIPS specific README file to explain the MIPS specifical
architectural issues.
Finally correct the variant configurations within the tune-mips32.inc.
(From OE-Core rev: efbfa2ace3362393a20340af93e8dcab17a8619a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We perform a basic cleanup of the IA32 architecture and related
tunings in order to match the rules and descriptions within the
new tuning README file.
A number of small issues were corrected in the "c3" tuning to
bring it inline with the README.
(From OE-Core rev: ab77d3401908964f3249c761969600b5ec1bfbd0)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a new README that covers the basic items used with various cpu
tunings. The goal is to better help people understand the various
settings and where things should or should not be defined.
Corresponding architecture README files will also be generated to
explain the particulars of architectural tunings.
Also remove the default TUNE_PKGARCH setting in bitbake.conf. This
was done to ensure an error occurs if an invalid tuning is defined.
(From OE-Core rev: e138f9f7e48e0af94c5c88045c4f0581cc68248d)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This bbclass inherits archiver.bbclass to archive patched source
[YOCTO #1977]
(From OE-Core rev: 8f25bf3881ee568bbe03132d2205da5382fa7dd6)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe already includes "task-self-hosted" in the IMAGE_INSTALL
line:
IMAGE_INSTALL = "task-core-boot task-core-apps-console task-core-ssh-openssh task-self-hosted"
so there's no apparent need to include it again further down.
(From OE-Core rev: bbc7f24d463c11b16f000462528c18bbb86b1e88)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
g++ 4.7 is detecting inheritence problems
which we solve by explictly specifying
elements in constructors
(From OE-Core rev: 553ac1bf0ebf2ecf4e45ace4016b50c810ef7b26)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
C getpid needs unistd.h for getting
its signature
(From OE-Core rev: da89bb83298eaf28faebcc8782f207927fbe190a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Include unistd.h for all linux and not
just for android.
(From OE-Core rev: c870606c9da2fa90df2cd7c4a198e3bf5340304b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The modification is as follow:
- Modify some codes with more preferable readability and vague description.
- Use existed functions instead of custom functions.
(From OE-Core rev: 514319c4a15156cd63a4ac3c6ee903f64c98884e)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The PACKAGE_NO_GCONV var manipulations ware happening in the
eglibc-options.inc file, and the eglibc-locale recipe do not
see it. Moving that into the libc-package.bbclass which is
common to eglibc & eglibc-locale recipes.
This fixes bug: [YOCTO #2089]
This avoids this error for poky-tiny
NOTE: package eglibc-locale-2.13-r19: task do_populate_sysroot: Started
ERROR: Error executing a python function in
/opt/poky.git/meta/recipes-core/eglibc/eglibc-locale_2.13.bb:
OSError: [Errno 2] No such file or directory:
'/home/rchatre/concordia/dev/ccd-distro-work/tmp/work/core2-poky-linux/eglibc-locale-2.13-r19/package/usr/lib/gconv'
ERROR: The stack trace of python calls that resulted in this exception/failure
was:
ERROR: File "package_do_split_gconvs", line 264, in <module>
ERROR:·
ERROR: File "package_do_split_gconvs", line 45, in package_do_split_gconvs
ERROR:·
ERROR: File "package.bbclass", line 30, in do_split_packages
ERROR:·
ERROR: The code that was being executed was:
ERROR: 0260:»------»-------bb.note("generation of binary locales disabled.
this may break i18n!")
ERROR: 0261:
ERROR: 0262:
ERROR: 0263:
ERROR: *** 0264:package_do_split_gconvs(d)
ERROR: 0265:
ERROR: (file: 'package_do_split_gconvs', lineno: 264, function: <module>)
ERROR: 0041:»------»-------»-------d.setVar('RPROVIDES_%s' % pkg,
pkg.replace(bpn, 'glibc'))
ERROR: 0042:
ERROR: 0043:»------do_split_packages(d, gconv_libdir,
file_regex='^(.*)\.so$', output_pattern=bpn+'-gconv-%s', \
ERROR: 0044:»------»-------description='gconv module for character set
%s', hook=calc_gconv_deps, \
ERROR: *** 0045:»------»-------extra_depends=bpn+'-gconv')
ERROR: 0046:
ERROR: 0047:»------def calc_charmap_deps(fn, pkg, file_regex,
output_pattern, group):
ERROR: 0048:»------»-------deps = []
ERROR: 0049:»------»-------f = open(fn, "r")
ERROR: (file: 'package_do_split_gconvs', lineno: 45, function:
package_do_split_gconvs)
ERROR: Function failed: package_do_split_gconvs
ERROR: Logfile of failure stored in:
/home/rchatre/concordia/dev/ccd-distro-work/tmp/work/core2-poky-linux/eglibc-locale-2.13-r19/temp/log.do_package.31042
NOTE: package eglibc-locale-2.13-r19: task do_package: Failed
ERROR: Task 552 (/opt/poky.git/meta/recipes-core/eglibc/eglibc-locale_2.13.bb,
do_package) failed with exit code '1'
Signed-Off-By: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This Fixes [Ycoto #2223] bug.
The gcc osdir is obtained in the do_install by invocation of
command "gcc -print-multi-os-directory". For x32 it returns gcc
osdir for the default abi which is x86_64. Fix this by adding
target abi parameter to the gcc command line to get correct gcc
osdir with invocation of command "gcc -mx32 -print-multi-os-directory"
(From OE-Core rev: e65b6a4282d5c4882d0565b79ccba99db90161ff)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_package_write_{deb,ipk,rpm}
* Explicitly set umask to 022. Otherwise the build system's
umask may leak into the image.
(From OE-Core rev: d2a54427481856238bdfec9723cf575088320512)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 20996da46aff03e61de50444ab3a0ab46c057dfd)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
actually if a package has a license in its LICENSE variable
which is not in the whitelist nor in the blacklist and even
if an other license in this variable is in the whitelist,
the package gets excluded and is not taken in account in the
copyleft_compliance.
This patch solves this by excluding a recipe _only_ if the
LICENSE variable includes a pattern from the blacklist and
including a recipe only if it includes a variable from the
whitelist _and_ none from the blacklist.
Example in busybox which has LICENSE="GPLv2 & BSD-4-Clause",
with the actual behaviour (where he blacklist contains only
CLOSED Proprietary) we get :
DEBUG: copyleft: busybox-1.19.4 is excluded: recipe has excluded licenses: BSD-4-Clause
which is not sane because busybox is covered by a copyleft license
which is GPLv2 and should match the default whitelist which is
GPL* LGPL*.
(From OE-Core rev: 987d06447d2eacf2e01f08e29469c00fbb0ef1db)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A cleaner way to check if copyfile suceeded is to use os.path.isfile.
In this way we can omit warns in some python versions where copyfile
return the same non-0 value even is this action is successfull.
(From OE-Core rev: fa51fe19a1dc1ddc4c9ec879a782953fd6a15117)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A comment in the binutils sources indicate that it should support all of the
-march= parameters that gcc supports. The tune validations noted that
gas failed on -march=armv5e.
It is not yet clear to me if this patch belongs upstream or not.
(From OE-Core rev: 4f2503ebdb5c491b758cbdf6eb7df96d4295c24f)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix some library dependency issues:
* Disable lzma as xz-native is unstated in DEPENDS
* Disable bzip2 for native as it is in ASSUME_PROVIDED and thus isn't
available when elfutils-native is normally built, but if it gets
rebuilt the link will be made; plus we don't need it.
(From OE-Core rev: 1634d736c55f767fe82a46bbb7f83c32006fece9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Fixes communication between gdbserver and gdb-cross
by using the same expat settings for both recipes.
* Adds missing build dependencies for expat/expat-native.
* Adds missing glibc-thread-db runtime recommendation
to gdbserver, which was set only for gdb.
(From OE-Core rev: 38ee88e3b32b7444d7f1eb64f1b4f69a48fe0458)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use SDK_GLIBC_ADDONS for eglibc-nativesdk so that it is not
dependant on the target eglibc's GLIBC_ADDONS settings.
(From OE-Core rev: e165203a6a7eb1fd47a20c3ede4d5a20ad49487f)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gettext-minimal-native andgettext-native are trampling over each other's files. This can
be reproduced with:
bitbake gettext-minimal-native
bitbake gettext-native
bitbake gettext-native -c clean
bitbake shadow-native
which will fail since the aclocal gettext macros will have disappeared. This patch
fixes the problem by giving ownership of them to gettext-minimal-native and ensuring
there is a correct dependency on this.
(From OE-Core rev: 5bcb68a232539cf11a30e3b812b2fbd6d7d76e35)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a similar situation to:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=3c96a5386355969428163ddb60216cc989e00b3d
Builds were failing with a failure in configure:
| checking for i586-poky-linux-gcc... ccache i586-poky-linux-gcc -m32 -march=i586 -L/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/sysroots/qemux86/usr/lib
| checking whether the C compiler works... no
| configure: error: in `/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/work/i586-poky-linux/gst-ffmpeg-0.10.13-r2/gst-ffmpeg-0.10.13':
| configure: error: C compiler cannot create executables
| See `config.log' for more details
config.log shows:
configure:3976: ccache i586-poky-linux-gcc -m32 -march=i586 -L/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/sysroots/qemux86/usr/lib -O2 -pipe -g -feliminate-unused-debug-types -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed conftest.c >&5
/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.4/ld: cannot find crt1.o: No such file or directory
/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.4/ld: cannot find crti.o: No such file or directory
/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.4/ld: cannot find crtbegin.o: No such file or directory
/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.4/ld: cannot find -lgcc
/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.4/ld: cannot find -lgcc_s
collect2: ld returned 1 exit status
The reason being the --sysroot option is missing from the gcc commandline and
its looking in nightly-x86, not nightly-world in this case.
There is no reason to add extra -L options to the compiler, the sysroot already
takes care of this. We can therefore simply remove this incorrect CC line.
(From OE-Core rev: 78299c87eafbea8331fa062f61095dd8de429109)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A cmp instruction with two constants is invalid, therefore 'g' constraint
is not correct but must be "rm" instead.
(From OE-Core rev: 1161c40a26146629613bd6a17b263175a492b751)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Further Details are in patch itself
(From OE-Core rev: 0dc952e35da00a753317a4f878b23eab8bb7bc4a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Migrate linux-yocto-tiny from 3.0 to 3.2. The 3.0 recipe was
based entirely on recipe-space fragments and was only a proof of concept.
The 3.2 linux-yocto meta-data now has a proper tiny KTYPE defined.
By default this recipe supports only the qemux86 machine, which builds the
common-pc support (including networking, sound, USB, VGA and serial consoles,
etc.). New machines can be added and will use the tiny KTYPE, but will need to
add any desired hardware support as the base config is very minimal.
No filesystems are supported by default, only the initramfs.
(From OE-Core rev: 44c556f5300b1d811a1ae71f501320d1a6b0fb2e)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating the META SRCREV to pickup these commits:
59f350e meta: Add common-pc-tiny.scc
0996ca9 tiny: Minimize the tiny config
d6b57bb meta: common-pc add dependencies to cfg
Which update the configuration for the tiny profile of the kernel
for the 3.2 release.
cc: Darren Hart <dvhart@linux.intel.com>
(From OE-Core rev: df3b8f716cc9203251cd4d4b5e673d7ecab5111b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 80e1cf4deb2a875449876f947a7a8ba29d6def5b)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We use sed to enable the 2 settingis in conf/local.conf.
(From OE-Core rev: eb985d333eb0f13e142da43b4b2b9ec5ad40ff30)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 826918b634deaa2b7201f3068d6f1410c5641d63)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1) remove the assumption ${DL_DIR} ends with downloads/.
Thanks Paul Eggleton for pointing this out.
2) remove downloads/git2_* tarballs to speed up the rootfs creation.
This is ok since we still have the git2/.
Thanks Richard Purdie for suggesting this.
(From OE-Core rev: 58ba59f034941bf167e70ae6c08117e5184a20ec)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
of memory
update_to_1.95.patch was generated by making a diff bewteen the 1.4.1 release
and the latest 1.9.5 version in the cvs repo:
http://genext2fs.cvs.sourceforge.net/viewvc/genext2fs/genext2fs/genext2fs.c?revision=1.95
The patches 0001-0019 come from mailing list of genext2fs-devel
http://sourceforge.net/mailarchive/forum.php?forum_name=genext2fs-devel&max_rows=100&style=flat&viewmonth=201106
(From OE-Core rev: 8f17e499cf91191727c8767e839738cb39c21655)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
buildhistory dir
This seperates out image changes from package changes making the image diffs a lot easier to read.
(From OE-Core rev: fba198ac7efe476a25c5761878ef2fcee97bf9f1)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When nothing has changed an empty commit prefixed with "No changes" will get generated so that the commit log of the buildhistory repo provides a complete log of all builds performed, not just those that resulted in changes.
(From OE-Core rev: 2e40558cc33c5c566a9a742c32eda3ea017f8607)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are various conditions that lead to duplicate entries in the dot graph which need to get fixed, but this patch is a catchall. A previous attempt to address this only works on rpm which gives a \n seperated output, opkg doesn't.
Another benefit is that the sort order is now know, leading to less spurious diffs in buildhistory commits.
(From OE-Core rev: 479ae1e9b74aa2f04fb5da2f3541c3de0aa9de87)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This makes the libraries located in places like this findable:
/usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/usr/lib
Which avoids linking cross canadian sdk executables with host libraries like this:
$ ldd /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/usr/bin/x86_64-oe-linux/x86_64-oe-linux-gdb
linux-vdso.so.1 => (0x00007fffb7fff000)
libreadline.so.6 => /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/usr/lib/x86_64-oe-linux/../libreadline.so.6 (0x00007fbfb5511000)
libdl.so.2 => /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/libdl.so.2 (0x00007fbfb530c000)
libncurses.so.5 => /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/libncurses.so.5 (0x00007fbfb50e9000)
libtinfo.so.5 => /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/libtinfo.so.5 (0x00007fbfb4ec2000)
libz.so.1 => /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/usr/lib/x86_64-oe-linux/../libz.so.1 (0x00007fbfb4cac000)
libm.so.6 => /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/libm.so.6 (0x00007fbfb4a2a000)
libpthread.so.0 => /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/libpthread.so.0 (0x00007fbfb480d000)
libutil.so.1 => /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/libutil.so.1 (0x00007fbfb4609000)
libexpat.so.1 => /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/usr/lib/x86_64-oe-linux/../libexpat.so.1 (0x00007fbfb43e0000)
libc.so.6 => /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/libc.so.6 (0x00007fbfb4059000)
/usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/ld-linux-x86-64.so.2 => /lib64/ld-linux-x86-64.so.2 (0x0000003f05000000)
[RP: Whitespace tweaks]
(From OE-Core rev: c97f7f4e4ecd6c431712059c34ebc17b68b055ae)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All PACKAGE_EXTRA_ARCHS for cortexa8, cortexa8t and cortexa8-neon have typo in
referencing tune-armv7at even for non-Thumb modes. Probably a copy/paste error.
That's not the case for recently-added hard-fp tunes.
Same for cortexa9.
(From OE-Core rev: 4e91c00bb3a171bebdb716451b901f5f099a04bc)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This Fixes bug: [YOCTO #2176]
This fixes the following issue as mentioned in the bug:
If nasm-native has to be rebuilt (due to a signature change) it will fail:
| checking for a BSD-compatible install... /usr/bin/install -c
| /media/large/tmp/work/x86_64-linux/nasm-native-2.07-r1/nasm-2.07/configure:
line 4261: syntax error near unexpected token `-W'
| /media/large/tmp/work/x86_64-linux/nasm-native-2.07-r1/nasm-2.07/configure:
line 4261: `PA_ADD_CFLAGS(-W)'
| ERROR: oe_runconf failed
NOTE: package nasm-native-2.07-r1: task do_configure: Failed
The failure appears to be caused by do_patch_fixaclocal being run a second time
(From OE-Core rev: 2d26b1a4f83a635f96072589289a389675abb305)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For -nativesdk, the dependency should be pkgconfig-nativesdk instead of
pkgconfig.
(From OE-Core rev: 36c0d1fdc71f9c63699049911aeddb07a746ca4a)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
-nativesdk recipes should not have dependency to lib-cross, which is
never used. This unnecessary dependency would result different task hash
values in sstate for different MACHINE settings.
(From OE-Core rev: 313deb802c5411c6c88655057f05a7d8823d999c)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The TUNE_PKGARCH of crosssdk should be set to SDK_ARCH, not the one
from target machine's configuration.
Fixed bug [YOCTO #2206]
(From OE-Core rev: e809b6657c53616a82e73d2f20ec23bc50ccebc9)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch fixed the issue of reading incorrect pkgdata files. Previous
appending '-nativesdk' suffix to PACKAGE_ARCHS would result the
i686-nativesdk recipes reading in x86_64-nativesdk pkgdata files if the
MACHINE is set to qemux86-64.
Fixed bug [YOCTO #2203].
(From OE-Core rev: 951a68731f655f597c5dfa541fc913d399eabfb9)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix runtime error occurred e.g. with docbook-to-man calls:
grep: character class syntax is [[:space:]], not [:space:]
grep: character class syntax is [[:space:]], not [:space:]
jw: There is no frontend called "/docbook/utils-0.6.14/frontends/docbook".
See also:
<https://qa.mandriva.com/show_bug.cgi?id=61127>
(From OE-Core rev: 627998726ca3ee2ed2510c0f666747f688d06c56)
Signed-off-by: Steffen Sledz <sledz@dresearch-fe.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Still need mesa-xlib for emulation of GLX interface on qemuarm/mips/ppc, where
mesa-dri doesn't work for pure qemu emulator.
[YOCTO #2066] fixed.
(From OE-Core rev: 22775b5f1d9c6d9860a579245bf7a48a982ab62f)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adpated to the new environment file name for powerpc, due to the oe-core
commit c2d96179.
Fixed bug [YOCTO #2055].
(From OE-Core rev: bebcac5e6eaceb7bdafa6432e42fe8073a42c6d2)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: d1ffae623ea9a6be3d2cb9067f64f33cc1fd1e8a)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 6a7ea3cf81f3600fec01bdd4af96ed149398a1a1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* log_check can find some files with ERR or Fail substring e.g. in "Source: " field
(From OE-Core rev: 76c83f107d4a4688a879e30821ab70812052bbdc)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Saul Wold
Mark Hatle
Xiaofeng Yan
Robert P. J. Day
Khem Raj
Nitin A Kamble
Andreas Oberritter
Eric Bénard
Andrei Gherzan
Paul Eggleton
Lianhao Lu
Richard Purdie
Darren Hart
Bruce Ashfield
Dexuan Cui
Koen Kooi
Denys Dmytriyenko
Steffen Sledz
Zhai Edwin
Martin Jansa