| Age | Commit message (Collapse) | Author |
|---|
|
The emenlow didn't have the default 8250 serial ports.
Including the common serial config fragment fixes this
problem.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Fixes [BUGID #432, #438, #437, #422]
[atom-pc: switch to the atom-pc branch
The atom-pc has a dedicated branch and merged kernel commits.
Swtich the kernel recipe to use the fully integrated BSP
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>]
[atom-pc: add kernel config options needed for -live images
Fixes [BUGID #432]
Live images require VFAT filesystem and loop device support - this
adds the required kernel config options for them.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>]
[atom-pc: Add netbook wireless networking support for NB305 and eee901
Add the atom-pc-wifi.cfg to enable wireless networking support for the netbooks
mentioned in the atom-pc machine config file.
Note: this adds a staging tree driver (rt2860sta) for the eee901 wifi.
[BUGID #438]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Richard Purdie <rpurdie@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>]
[atom-pc: Add netbook wired networking support for NB305, Aspire One, and eee901
Add the atom-pc-eth.cfg to enable wired networking support for the three
netbooks mentioned in the atom-pc machine config file.
[BUGID #437]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Richard Purdie <rpurdie@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>]
[routerstationpro: add missing kernel patches
[BUGID: #422]
Add the kernel patches required for routerstaion pro boot
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>]
[netbook: allow hardisk booting
[BUGID: #445]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
The atom-pc has a dedicated branch and merged kernel commits.
Swtich the kernel recipe to use the fully integrated BSP
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
[BUGID #363]
Integrate the x86 gfx options into the existing x86 graphics
options for the common_pc and common_pc_64 boards.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
BUGID: 421
Create the infrastructure to build the beagleboard against the
linux-wrs kernel.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
BUGID: 423
Introduce the basic mpc8315e BSP. By default this BSP uses
the basic 603 tuning and soft-float. There are issues with
the e300 tuning and eglibc, and the compiler. Subsequent
commits will further tune this BSP.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
BUGID: 422
Add the machine configuration and kernel infrastructure for building
the routerstation pro BSP.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Init scripts assume uvesafb as module, and also need CONFIG_FRAMEBUFFER_CONSOLE
to set some mode parameter, else wrong parameter cause psplash's mmap failure.
This is just a quick fix as we don't know how to change the wrs kernel config
in a clean way. Should revert it with clean way of changing.
[BUGID #363] fixed by this
Signed-off-by: Tian Kevin <kevin.tian@intel.com>
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
|
|
Add CONFIG_FRAMEBUFFER_CONSOLE to the i915.cfg config fragment for
the atom-pc machine. This allows the BlackSand to boot to the sato
desktop with text after the fb switch as well as the poky splash
screen.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Richard Purdie <rpurdie@linux.intel.com>
|
|
Add serial port support for atom-pc.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Add the option of using linux-wrs as the kernel provider for atom-pc. This
patch uses poky to apply config fragments to the common_pc-standard branch
of the linux-wrs kernel. A follow-on patch will remove these once linux-wrs
has an atom-pc branch and the config fragments are present in the kernel
repository.
This configuration boots to a prompt on the BlackSand, but panics unable
to find the root partition on the Toshiba NB305 where the "rootwait"
kernel boot option appears to be being ignored.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
In preparation for the more generic atom-pc, rename the netbook machine and all
the relevant overrides. Leave the linux-netbook kernel recipe intact and as the
default kernel for the atom-pc machine. A future patch will convert this over
to linux-wrs and likely remove the linux-netbook kernel recipe.
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Fixes [BUGID: #390]
The custom de-checkpoint routines used in createme/patchme
destroyed data each run. This meant that incremental and
expermental work couldn't be done directly in the kernel source
tree itself. Using the more robust kgit-checkpoint allows that
data to be persistent (until a clean is done).
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Fixes [BUGID #388]
Even if we aren't creating the branch from scratch, it is possible
that it has never been patched before. So let's make sure the
infrastructure for patching is always in place.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Currently default header is linux-libc-header, which leads the dismatch
with wrs kernel.
The different headers for same file cause trouble between kerenl module and
user level binary. E.g. segfault in v86d due to different
CONNECTOR_MAX_MSG_SIZE in connector.h from the one used by uvesafb.
This fix is work around to sync with wrs kernel headers, and should be removed
after switching to linux-libc-headers-wrs.
[BUGID #279] fixed by this.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
|
|
Part of [BUGID #373]
In order to generate BSP definitions for new boards, we need
to know the architecture. So we'll arrange to pass it to
updateme.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Fixes [BUGID #372]
If for some unknown reason, the kernel git repository hasn't been properly
updated and is *older* than the revisions listed in default-revisions the
branch sanity checking kicks in and tries to force branches to the right
revs. The problem is, the revisions it is looking for don't exist in the
tree. As a result, error messages are thrown about invalid commit IDs.
These aren't helpful, and are simply confusing for the user.
Instead we can test for the commit ID, and if it isn't valid, indicate
that the commit ID isn't valid and that the tree is potentially out
of sync.
This situation is not common, but it is an easy test and the extra
sanity checking is useful.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
|
|
to meta
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
|
|
Fix for unresolved libelf error when running perf:
perf: error while loading shared libraries: libelf.so.1: cannot open
shared object file: No such file or directory
Signed-off-by: <tom.zanussi@intel.com>
Signed-off-by: <bruce.ashfield@windriver.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
* Device tree compiler recipes from OE
* v2 reorder patchset
* remove BBCLASSEXTENDDED from dtc-native.inc
* v3 remove installing dtc in ${STAGING_BINDIR}
* fix PR variable follow Poky guidelines
* v4 fix PV variable
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
* Add binary devicetree generation support
* Taken from OE
* v2 reorder patch set
* v3 remove package_stagefile_shell
* v4 rename devicetree_image function to install_append
* remove pkg_postinst_kernel-devicetree,
pkg_postrm_kernel-devicetree functions
* Update KERNEL_DEVICETREE_FLAGS use "-p" option instead
of "-S" which is deprecated
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
It is possible for the git repository to have commits on branches
that are ahead of the SRCREVs for those branches. Since the
kern tools will simply checkout and build, we can end up building
a different kernel than what is expected.
It is up to the recipe to ensure that the branches are at the
correct commits. To do this, we simply check the current machine
branch against the SRCREV and if they don't match we move the
existing branch and do a checkout at the desired commit.
Note: This probably needs to be disabled with AUTOREV.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
By defining the perf package in the shared kernel class bitbake will be able to
find the package provider even when the preferred kernel doesn't build perf,
preventing dependency resolution failures.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Updating the SRCREVs for the recent port of bug fixes for all boards
and the integration of qemux86-64 config and connector changes.
Now that the qemux86-64 changes are in tree, we can drop them from
the linux-wrs recipe.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
Fix [BUGID #262]
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
|
|
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
|
|
The cause is: in dump mode, setup_windows() is not invoked so the
*_window variables, like cstate_window, are still NULL; later in
main() -> show_cstates(), the functions, like wrefresh(), will trigger
segfault.
After discussing in PowerTop mailling list, I think the right solution is
we should stub out the ncurses calls in dump mode.
(The patch was also sent to upstream PowerTop mailling list.)
This fixes [BUGID #195]:
Bug 195 - [sdk] powertop segfault when running with dump option
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
update HOMEPAGE;
add RRECOMMENDS_${PN} = "pciutils" as powertop 1.13 needs lspci;
add EXTRA_OEMAKE = "VERSION=\"${PV}\" to make the build succeed;
fix coding style: 4 SPACEs --> 1 TAB.
fix RRECOMMENDS to RDEPENDS
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
Having one monolithic packages directory makes it hard to find things
and is generally overwhelming. This commit splits it into several
logical sections roughly based on function, recipes.txt gives more
information about the classifications used.
The opportunity is also used to switch from "packages" to "recipes"
as used in OpenEmbedded as the term "packages" can be confusing to
people and has many different meanings.
Not all recipes have been classified yet, this is just a first pass
at separating things out. Some packages are moved to meta-extras as
they're no longer actively used or maintained.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
Bruce Ashfield
Richard Purdie
Kevin Tian
Darren Hart
Zhai Edwin
Saul Wold
Tom Zanussi
Adrian Alonso
Joshua Lock
Dexuan Cui