| Age | Commit message (Collapse) | Author |
|---|
|
"yocto-compat-layer.py --machines" showed that shared packages like
gcc-cross-powerpc64 have a sstate signature that depends on
TUNEFLAGS. As a result, there are unnecessary rebuilds and potential
conflicts in a multiconfig.
That's due to the way how TARGET_ARCH is set. Richard Purdie suggested
setting TARGET_ARCH[vardepvalue] as fix, which works. It would be
shorter to do that in cross.bbclass instead of repeating the relevant
line in different recipes, but Richard was concerned about potential
side-effects in other usages of cross.bbclass.
TARGET_GOARM as used in go.inc is still causing signature differences
for go-cross-powerpc64 and machines b4420qds-64b and p5020ds-64b. This
needs further investigation.
(From OE-Core rev: 39bfa0dd3237cbca47e7fca1075d521f9d073f25)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Building gcc-cross-initial with GCC7 on the host fails due to the
comparison of a pointer to an integer in ubsan_use_new_style_p, which
is forbidden by ISO C++:
ubsan.c:1474:23: error: ISO C++ forbids comparison between pointer and
integer [-fpermissive]
|| xloc.file == '\0' || xloc.file[0] == '\xff'
Backport the fix from upstream GCC to enable the build with GCC 7
(From OE-Core rev: 7a7fcbab0365b9501c737dbc02715be14dda72a3)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We've had a lot of users running into RSS issues where -initial recipes
were being installed into sysroots alongside their counterparts and
causing overlapping files issues.
In general this was through do_build dependencies. Such dependencies are
bad in general and I'd encourage people to compare the taskgraphs with
using a more specific dependency like do_populate_sysroot, do_image_complete
or do_deploy as often the more specific dependency will result in a much
cleaner build.
Regardless, we don't want -initial dependencies getting in the way like
this and there are cases a do_build dependency could make sense.
Deleting the do_build task in these cases makes sense since this is not
a build "endpoint" we'd ever want a user to use, its a behind the scenes
piece of bootstrappping.
Unfortunately to make this work, we need a newer bitbake version which
has a bitbake bug fixed.
(From OE-Core rev: 04c053d42ab05f77b2d1ca93a0fabae44073d57e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Create symlinks for gcov and gcov-tool and that they can be used trivially
on target.
(From OE-Core rev: 5b5a506a6d81095c967304fe4ec38a4bc3dc1edd)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The file /usr/libexec/gcc/.../cc1 has been installed in package gcc
instead of package cpp, because FILES statements for both packages match
the cc1 binary. Move the file to package cpp and add cpp to RDEPENDS_gcc
to fix the dependency.
Having the cc1 binary in cpp fixes errors such as: "cpp: error trying to
exec 'cc1': execvp: No such file or directory".
(From OE-Core rev: 4bf84edeb6cf4ba82a21bc7ceb1da4f59d839064)
Signed-off-by: Ismo Puustinen <ismo.puustinen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
CVE-2016-4490 applied to gcc < 6.1.1, our version is 6.3
(From OE-Core rev: d8329861bf6f48f6e541a04062b8d1f373dfcd78)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Intel MPX was recently enabled on x86 (_append_x86) but that didn't
enable it on x86-64. Explicitly enable libmpx on x86-64 too.
(From OE-Core rev: 5111bd5e666408dbca7db0e6d664fe0103744253)
Signed-off-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ERROR: gcc-runtime-6.3.0-r0 do_package: QA Issue: gcc-runtime: Files/directories were installed but not shipped in any package:
/usr/lib/libmpxwrappers.la
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install.
gcc-runtime: 1 installed and not shipped files. [installed-vs-shipped]
(From OE-Core rev: 3658da86e57dc87ac3957b05f853a7f1a56bfab2)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: ead8a8e9695ea47ecf8c8eba9cd06cc1a12cc289)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enabling building the Intel Memory Protection Extension library for x86.
Leave this disabled in musl builds as it doesn't build there yet.
(From OE-Core rev: 4b144b55acbd43b38d92d29829d8ec68ff372e9d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[NVD] -- https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-6131
The demangler in GNU Libiberty allows remote attackers to cause a denial
of service (infinite loop, stack overflow, and crash) via a cycle in the
references of remembered mangled types.
[BZ #71696] -- https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71696
2016-08-04 Marcel Böhme <boehme.marcel@gmail.com>
PR c++/71696
* cplus-dem.c: Prevent infinite recursion when there is a cycle
in the referencing of remembered mangled types.
(work_stuff): New stack to keep track of the remembered mangled
types that are currently being processed.
(push_processed_type): New method to push currently processed
remembered type onto the stack.
(pop_processed_type): New method to pop currently processed
remembered type from the stack.
(work_stuff_copy_to_from): Copy values of new variables.
(delete_non_B_K_work_stuff): Free stack memory.
(demangle_args): Push/Pop currently processed remembered type.
(do_type): Do not demangle a cyclic reference and push/pop
referenced remembered type.
cherry-picked from commit of
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@239143 138bc75d-0d04-0410-961f-82ee72b054a4
(From OE-Core rev: 3c288b181a4cfecc80b48994f4dd2df285e4d1d0)
(From OE-Core rev: 96a16c4181d18b8580dad243350d589586cb2b07)
Signed-off-by: Yuanjie Huang <yuanjie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes build on hardened PAX host with gcc-5 (linker error on relocs).
Completes no-PIE config by adding to ALL_* flags variables.
Borrowed from Gentoo gcc patches, tested on 2 hardened amd64 hosts.
Upstream-Status: Inappropriate [configuration]
Commited by: Gentoo Toolchain Project <toolchain@gentoo.org>
(From OE-Core rev: c178791cd78d5a9ebc4d7b7790e647a9bafe9cf2)
(From OE-Core rev: fcb236ea7cd1ac052719187fefed60ebf1a30ac8)
Signed-off-by: Stephen Arnold <stephen.arnold42@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Its sad we need to do this but do_install and do_populate_sysroot appear
to change the files in ${B} and this breaks if something works in parallel
like gcc_stash_builddir. We've seen a few too many race errors on the
autobuilder which appear to be from this so make things run in sequence
deterministically for now.
An example failure was this from do_populate_sysroot whilst stash_builddir was running
in parallel:
ERROR: gcc-cross-initial-arm-6.3.0-r0 do_populate_sysroot: split_and_strip_files: 'file
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-arm-lsb/build/build/tmp/work/x86_64-linux/
gcc-cross-initial-arm/6.3.0-r0/sysroot-destdir/home/pokybuild/yocto-autobuilder/yocto-worker/
nightly-arm-lsb/build/build/tmp/work/x86_64-linux/gcc-cross-initial-arm/6.3.0-r0/recipe-sysroot-native/
usr/bin/arm-poky-linux-gnueabi.gcc-cross-initial-arm/arm-poky-linux-gnueabi-gcov' failed
Exception: subprocess.CalledProcessError: Command '('patchelf-uninative', '--set-interpreter',
'/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-arm-lsb/build/build/tmp/sysroots-uninative/
x86_64-linux/lib/ld-linux-x86-64.so.2', '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-arm-lsb/
build/build/tmp/work/x86_64-linux/gcc-cross-initial-arm/6.3.0-r0/sstate-build-populate_sysroot/
recipe-sysroot-native/usr/bin/arm-poky-linux-gnueabi.gcc-cross-initial-arm/arm-poky-linux-gnueabi-gcov')' returned non-zero exit status 1
Subprocess output:
missing section headers
(From OE-Core rev: 75b76eb08c7e344142f0326605aeb6b24e61e38e)
(From OE-Core rev: 7265e99d0b4b662ca7f23d480f2845a309ac57fc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that the datastore works dynamically we don't need the update_data calls
so we can just remove them. They're not actually done anything at all for
a while.
(From OE-Core rev: 8de0c5d3bd01919e2bf0394f9c485936d6098cec)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We used to need to build gcc-cross-initial against a bare sysroot to avoid
contamination. With RSS, we no longer need to do this since the recipe sysroot
is already bare. We can therefore simply point at that and drop this code.
(From OE-Core rev: f70603887f823c14030bb738c4951d7aa3f022db)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
GCC provides some of std* headers including stddef.h
and it syncs with glibc definitions via __needed* defines
to find which datatypes are expected to be defined on top
of glibc. we need same for musl.
Drop unused 0048-ARM-PR-target-71056-Don-t-use-vectorized-builtins-wh.patch
(From OE-Core rev: 7da04721a620ad741ea50adf116e6b5afd47caa5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we don't do this, things break with rm_work which removes things
before the task completes causing task failures.
(From OE-Core rev: bfea0e6a5aee9ce15bf20bcb2781329e6281284c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
SDKPKGSUFFIX could only really be "nativesdk" and TARGET_SYS never contains
that so the code manipulating TARGET_SYS is pointless. I suspect this once
worked against MULTIMACH_TARGET_SYS which would be a different question but
it no longer does. Its been cut and pasted everywhere.
This patch cleans up the variable references to make things a little more
readable.
(From OE-Core rev: 5599cb72d17bce2ba6e2be16ef64d9a388bcfb25)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently there is a race where if you build -cross-canadian without building gcc (target)
you see QA errors about RPATHS. I've tracked this down to this manipulation where the
target gcc recipe changes libcc1 in the shared sources directory. As long as you build
things in the right order, the problem doesn't occur.
Since its changing ${S} move it to gcc-source and avoid the race, saving RP
some head scratching about why unrelated changes failed to build cleanly.
(From OE-Core rev: 626064c69b6fd1b5cead6995097f99e5fbda3f19)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we stashed the gcc build directory for use in generating the various runtimes
we were being lazy and just used the staging directory. With recipe specific
sysroots this means we're copying a large chunk of data around with the cross
compiler which we don't really need in most cases.
Separate out the data into its own task and inject this into the configure
step. We have to do that here since autotools will wipe out ${B} if it thinks
we're rebuilding and we therefore have to time its recreation after that.
This also takes the opportunity to remove some pointless (as far as I can tell)
conditionals from the do_install code.
(From OE-Core rev: dcf15ccf3cc9d55e77228ba8d526f967fc9791b4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch is comparatively large and invasive. It does only do one thing, switching the
system to build using recipe specific sysroots and where changes could be isolated from it,
that has been done.
With the current single sysroot approach, its possible for software to find things which
aren't in their dependencies. This leads to a determinism problem and is a growing issue in
several of the market segments where OE makes sense. The way to solve this problem for OE is
to have seperate sysroots for each recipe and these will only contain the dependencies for
that recipe.
Its worth noting that this is not task specific sysroots and that OE's dependencies do vary
enormously by task. This did result in some implementation challenges. There is nothing stopping
the implementation of task specific sysroots at some later point based on this work but
that as deemed a bridge too far right now.
Implementation details:
* Rather than installing the sysroot artefacts into a combined sysroots, they are now placed in
TMPDIR/sysroot-components/PACKAGE_ARCH/PN.
* WORKDIR/recipe-sysroot and WORKDIR/recipe-sysroot-native are built by hardlinking in files
from the sysroot-component trees. These new directories are known as RECIPE_SYSROOT and
RECIPE_SYSROOT_NATIVE.
* This construction is primarily done by a new do_prepare_recipe_sysroot task which runs
before do_configure and consists of a call to the extend_recipe_sysroot function.
* Other tasks need things in the sysroot before/after this, e.g. do_patch needs quilt-native
and do_package_write_deb needs dpkg-native. The code therefore inspects the dependencies
for each task and adds extend_recipe_sysroot as a prefunc if it has populate_sysroot
dependencies.
* We have to do a search/replace 'fixme' operation on the files installed into the sysroot to
change hardcoded paths into the correct ones. We create a fixmepath file in the component
directory which lists the files which need this operation.
* Some files have "postinstall" commands which need to run against them, e.g. gdk-pixbuf each
time a new loader is added. These are handled by adding files in bindir with the name
prefixed by "postinst-" and are run in each sysroot as its created if they're present.
This did mean most sstate postinstalls have to be rewritten but there shouldn't be many of them.
* Since a recipe can have multiple tasks and these tasks can run against each other at the same
time we have to have a lock when we perform write operations against the sysroot. We also have
to maintain manifests of what we install against a task checksum of the dependency. If the
checksum changes, we remove its files and then add the new ones.
* The autotools logic for filtering the view of m4 files is no longer needed (and was the model
for the way extend_recipe_sysroot works).
* For autotools, we used to build a combined m4 macros directory which had both the native and
target m4 files. We can no longer do this so we use the target sysroot as the default and add
the native sysroot as an extra backup include path. If we don't do this, we'd have to build
target pkg-config before we could built anything using pkg-config for example (ditto gettext).
Such dependencies would be painful so we haven't required that.
* PKDDATA_DIR was moved out the sysroot and works as before using sstate to build a hybrid copy
for each machine. The paths therefore changed, the behaviour did not.
* The ccache class had to be reworked to function with rss.
* The TCBOOTSTRAP sysroot for compiler bootstrap is no longer needed but the -initial data
does have to be filtered out from the main recipe sysroots. Putting "-initial" in a normal
recipe name therefore remains a bad idea.
* The logic in insane needed tweaks to deal with the new path layout, as did the debug source
file extraction code in package.bbclass.
* The logic in sstate.bbclass had to be rewritten since it previously only performed search and
replace on extracted sstate and we now need this to happen even if the compiled path was
"correct". This in theory could cause a mild performance issue but since the sysroot data
was the main data that needed this and we'd have to do it there regardless with rss, I've opted
just to change the way the class for everything. The built output used to build the sstate output
is now retained and installed rather than deleted.
* The search and replace logic used in sstate objects also seemed weak/incorrect and didn't hold
up against testing. This has been rewritten too. There are some assumptions made about paths, we
save the 'proper' search and replace operations to fixmepath.cmd but then ignore this. What is
here works but is a little hardcoded and an area for future improvement.
* In order to work with eSDK we need a way to build something that looks like the old style sysroot.
"bitbake build-sysroots" will construct such a sysroot based on everything in the components
directory that matches the current MACHINE. It will allow transition of external tools and can
built target or native variants or both. It also supports a clean task. I'd suggest not relying on
this for anything other than transitional purposes though. To see XXX in that sysroot, you'd have
to have built that in a previous bitbake invocation.
* pseudo is run out of its components directory. This is fine as its statically linked.
* The hacks for wayland to see allarch dependencies in the multilib case are no longer needed
and can be dropped.
* wic needed more extensive changes to work with rss and the fixes are in a separate commit series
* Various oe-selftest tweaks were needed since tests did assume the location to binaries and the
combined sysroot in several cases.
* Most missing dependencies this work found have been sent out as separate patches as they were found
but a few tweaks are still included here.
* A late addition is that extend_recipe_sysroot became multilib aware and able to populate multilib
sysroots. I had hoped not to have to add that complexity but the meta-environment recipe forced my
hand. That implementation can probably be neater but this is on the list of things to cleanup later
at this point.
In summary, the impact people will likely see after this change:
* Recipes may fail with missing dependencies, particularly native tools like gettext-native,
glib-2.0-native and libxml2.0-native. Some hosts have these installed and will mask these errors
* Any recipe/class using SSTATEPOSTINSTFUNCS will need that code rewriting into a postinst
* There was a separate patch series dealing with roots postinst native dependency issues. Any postinst
which expects native tools at rootfs time will need to mark that dependency with PACKAGE_WRITE_DEPS.
There could well be other issues. This has been tested repeatedly against our autobuilders and oe-selftest
and issues found have been fixed. We believe at least OE-Core is in good shape but that doesn't mean
we've found all the issues.
Also, the logging is a bit chatty at the moment. It does help if something goes wrong and goes to the
task logfiles, not the console so I've intentionally left this like that for now. We can turn it down
easily enough in due course.
(From OE-Core rev: 809746f56df4b91af014bf6a3f28997d6698ac78)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using "deltask" assumes that do_rm_work has been added already, which
won't be the case anymore in the upcoming improved rm_work.bbclass,
because then an anonymous python method will add do_rm_work.
Setting RM_WORK_EXCLUDE works with the current and upcoming
rm_work.bbclass and is the API that is meant to be used for excluding
recipes from cleaning, so use that.
(From OE-Core rev: 1f2a3cdadac1560b0e03a7be25f452ad48c27ddb)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
6.3.0 is a bugfix release in gcc 6 series
(From OE-Core rev: 36ffcd1d7d2ab9dcc91e9c09623a6613a248bc69)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
nativesdk-libgcc doesn't need a symlink into the target space and if we do this
sstate installation of the recipe can fail depending on whether it races with
the cross-canadian toolchains.
(From OE-Core rev: b2c1e1fe4221862e0dbf5d08960f0d0228e47c72)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
(From OE-Core rev: 7c552996597faaee2fbee185b250c0ee30ea3b5f)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Reduce duplication in MIPS variants now that the MACHINEOVERRIDES
variable is defined
(From OE-Core rev: c84c884da5007539ea290587c468f30c19f568e9)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using the following setup (as specified in yocto sample code):
MACHINE = "qemux86-64"
require conf/multilib.conf
MULTILIBS = "multilib:libx32"
DEFAULTTUNE_virtclass-multilib-libx32 = "x86-64-x32"
We fail to compile simple CPP programs because CPP cannot
find relevant header files, looking for them in a non-existing place.
To fix this, we create a symlink of the name CPP expects and point it to
the corresponding existing directory.
[YOCTO#10354]
[YOCTO#10380]
(From OE-Core rev: 9f9be229040f4f9a523a1e25afd78d5c3f4efc23)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch fixes broken "32" symlinks for multilib settings:
MACHINE = "qemuarm64"
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "armv7a"
and
MACHINE = "qemux86-64"
require conf/multilib.conf
MULTILIBS = "multilib:libx32"
DEFAULTTUNE_virtclass-multilib-libx32 = "x86-64-x32"
[YOCTO#8642]
[YOCTO#10380]
(From OE-Core rev: 2810671a0f96776c135137f27a5ca52194ddd692)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for MIPS Release 6 ISA
(From OE-Core rev: 4c694d5bd29c406009332e3bd388e3f6a504d103)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gcc-cross target recipes should not depend on SDK_SYS but started to
after recent changes. Remove the dependency to stop this (its caused
by shared code in do_install). The compiler names contain SDK_SYS
so changes would be correctly handled via other means.
(From OE-Core rev: 2b5761350a074de2e1a6db19621945fba39089fc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Arm is unusual in that we force it to "linux-gnueabi" and "linux" doesn't
build. This was causing problems for multilib configurations which were assuming
"linux" was the default compiler rather than linux-gnueabi.
This change does two things, ensures symlinks are generated for linux-gnueabi
and also adapts the libgcc code to account for the difference on arm.
It still needs to immediately expand/save TARGET_VENDOR but we defer
deciding what TARGET_OS should be until we know TARGET_ARCH (which the
multilib code may change).
[YOCTO #8642]
Note that sanity tests of a 32 bit arm multilib still break due to issues
with the kernel headers on a mixed bit system. This looks to be a general
headers issue for the platform though and a different type of bug.
(From OE-Core rev: bcddc3e7eff138add031bc9c9728be5a42fa62ef)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When changing SDKMACHINE, we may encounter an error forcing us to wipe the TMP folder.
Since only SDK_ARCH is captured in the PN of the crosssdk recipes, changes to SDK_OS
result in conflicts. Eventually we hit the error:
ERROR: ...: The recipe <...> is trying to install files into a shared area when those files already exist.
The build has stopped as continuing in this scenario WILL break things
This patchset addresses the problem by SDK_SYS as the recipe name suffix instead
of SDK_ARCH.
[YOCTO #9281]
(From OE-Core rev: d2eccccb70e809d482c493922f23aef4409cfd82)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds the correct support for initfini-array which replaces .init
and .fini with .init-array and .fini-array. There is no appreciable
size difference with this change.
The change is needed since configure will not correctly detect support
when building cross-compilers.
(From OE-Core rev: 9f8a075ab46691534e2b22d0a363b3c847394215)
Signed-off-by: Haitao Huang <haitao.huang@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch fixes the problem where the CPP compiler cannot find include files.
The compiler is configured to look for the files in places that do not exist.
When querying the CPP for search paths, we observe messages such as these:
multilib configuration:
MACHINE="qemumips64"
require conf/multilib.conf
MULTILIBS = "multilib:lib64 multilib:lib32"
DEFAULTTUNE = "mips64-n32"
DEFAULTTUNE_virtclass-multilib-lib64 = "mips64"
DEFAULTTUNE_virtclass-multilib-lib32 = "mips32r2"
ignoring nonexistent directory "<path>/sysroots/mips64-n32-poky-linux-gnun32/usr/include/c++/6.2.0/mips64-poky-linux/32
single lib configuration:
MACHINE="qemumips64"
DEFAULTTUNE = "mips64-n32"
ignoring nonexistent directory "<path>/sysroots/mips64-n32-poky-linux-gnun32/usr/include/c++/6.2.0/mips64-poky-linux/
To fix this, create a symlink of the name CPP expects and point it to the corresponding "gnun32" directory.
[YOCTO#10142]
(From OE-Core rev: 55115f90f909d27599c686852e73df321ad1edff)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 38b29d6730d67cd2421b6177472f6ed78f4542e0)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 41ce4b438795108025c79cd3eec067367d53623e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #9991]
(From OE-Core rev: 0d69b3bf6cdeee866642529b6269391146333a43)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes
[YOCTO #9772]
(From OE-Core rev: f96da00e78999899ea7037ebc9547a87023e309a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We explicitly set the hash style to gnu in our LDFLAGS. Setting the default to
this in the toolchain, while convenient, actually hides bugs, as a failure to
obey LDFLAGS isn't noticed. By removing this, it's not dissimilar to how we
poison the sysroot -- rather than relying on the default, notice right away if
somoeone isn't obeying the needed flags.
This will result in a failure to obey LDFLAGS causing a GNU_HASH QA failure,
which is what's often seen with external toolchains. This brings us all on the
same page, and makes sure a failure to obey LDFLAGS is seen early.
This is limited to cross, to retain ease of use for SDKs.
(From OE-Core rev: fa436aeb3242cbfdbbe16d448d45bce8eb5b74fd)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
v2: add missing .inc changes
add YP bug # to patch
[Yocto #9632]
not in 6.1.1 so back porting.
(From OE-Core rev: 5d644f5f54097282a77060d78d4f359a8a4c83bb)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's useful to know what the various libraries are that get produced by
gcc-runtime, as well as to have a specific SUMMARY for the recipe.
(From OE-Core rev: b8d5b4107c64784ea8c8f364a84c2bc76cd0b1b0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to use certain features of gcc, you need the corresponding
runtime library. It seems to me that these ought to be installed by
default when installing the compiler since they are required if certain
command line options are used, so add them to RRECOMMENDS. I used
RRECOMMENDS since some of these packages may or may not exist depending
on architecture and build options; additionally it makes it possible to
use BAD_RECOMMENDATIONS if you really want to exclude them.
The impact of this isn't too bad in the context of an image providing
on-target compilation - about a 30MB increase in size for an image
containing gcc and g++.
(From OE-Core rev: 658d9a764e91f394472c9082a3ed3fa7b9b417d2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The original fix [1] was made redundant by the followup [2].
[1] http://git.openembedded.org/openembedded-core/commit/?id=d774bb2d10f2c05900f87dcc53f073433ca02121
[2] http://git.openembedded.org/openembedded-core/commit/?id=d7799a17d5e802db3f8d16bdc824aae81538e675
(From OE-Core rev: 2f6e42068a0af01034e738daa6a7ce1a3bcb434d)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 615b784bd3d53a77b7e34e3879a72e7e51477db6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 8833e419e898d741900be3f03f8d8d4ef123aa1a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using -m32 -mmusl options in this order, gcc hangs
in parsing the options decode_cmdline_options_to_array()
the reason is that we have broken the link when adding
mmusl options, the order of specifying libc was not kept
in order as a result it was unable to contruct the array
correctly and ended in parse hang.
We fix the options to specify the order properly.
(From OE-Core rev: b362cf6ef6d7fa22a525cf3e1d17943e897bd8aa)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop patches which has been applied to gcc5 branch
until 5.4 release
(From OE-Core rev: 42487843f846ae61f8bd1b2278d148ff37f0d667)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're setting the native header paths in do_configure_prepend,
and don't need to set them again here.
This results in gcc-target not being able to locate the headers
and not being able to detect glibc version, which in turn
results in SSP support not getting detected even though it's available
in libc.
(From OE-Core rev: 85630aa894278e7818c867179dc19ca2fbd994fc)
Signed-off-by: Anuj Mittal <anujx.mittal@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 831ef4c6d6975adc586b035b6a228df2e68d18b6)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backport a patch from mainline gcc 5 branch to fix ICE triggered
when cross-compiling libdrm for nios2 architecture. The same ICE
is fixed in gcc6 already.
(From OE-Core rev: d603a6abf5abff2d1ccee902e0eb9f651aeb121e)
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Patrick Ohly
Joshua Lock
Richard Purdie
Chen Qi
Ismo Puustinen
Jussi Kukkonen
Mikko Ylinen
Martin Jansa
Ross Burton
Yuanjie Huang
Stephen Arnold
Khem Raj
Zubair Lutfullah Kakakhel
Juro Bystricky
Saul Wold
Christopher Larson
Armin Kuster
Paul Eggleton
Andre McCurdy
Anuj Mittal
Alexander Kanavin
Marek Vasut