| Age | Commit message (Collapse) | Author |
|---|
|
see: https://bugzilla.yoctoproject.org/show_bug.cgi?id=13663
When running oe-selftest in concurrency mode (e.g. with oe-selftest
--run-tests oescripts.OEPybootchartguyTests -j 4), if a skip occurred
during setUpClass() rather than within individual tests, the entire
suite would show "UNKNOWN" as each test's result. This is because
subunit doesn't know how to handle skips outside of individual tests.
An example of where this occurs is when running the above call to
oe-selftest in concurrency mode on a host machine that does not have
python3-cairo installed.
Patch subunit inside concurrencytest.py to provide a method called
outSideTestaddSkip, which will allow subunit to correctly detect the
skip in setUpClass().
(From OE-Core rev: 9b8734b584d6e8d9c32ff2a721b29f3f3e61cca7)
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
booting processes to be tested
The current runtime infrastructure contains hardcoded values which Ill refer to
as patterns, these patterns are either searched through or sent via the serial
terminal to communicate between HOST and TARGET.
These patterns are required since they allow us to check when a device has
finished booting, to log in, and to check whether a command sent from our tests
has returned, this way we are able to check both the status of the commands that
were sent along with its output.
The testing process goes somewhat as follows:
1. Launch QEMU and start booting.
2. Check when the device has booted by looking for the pattern login:.
3. Log in as the root user (default for our images).
4. Check that we were able to log in succesfully.
5. Start running the runtime test cases defined by TEST_SUITES.
6. One of such test cases could send a command to the QEMU target.
7. Check whether that command returned.
8. Check its output and status, return whether the test case passed or failed.
This patch allows this set of patterns to be defined instead of being hardcoded,
but it also automatically sets the defaults that we have been using in the past
if they have not been manually defined, for this reason, the patch is less
invasive and should not affect in any way how tests are currently being run.
Cases that can be enabled with this patch:
- A customized image that does not use the root user (or maybe we want to check
what happens if we dont use the root user).
- An image where the PS1 env variable has been modified, and the prompt pattern
wouldnt match the default.
- Baremetal applications, which do not follow the conventional way of booting
Linux and would probably not show a prompt for a user to log in, same applies
for testing bootloaders.
- poky-tiny: Using DISTRO=poky-tiny and an image such as the core-image-tiny
from meta-intel, which boots directly to RAM, and does not show a log in prompt
since it does not contain a conventional init process.
The code itself contains comments that should be self explanatory but here is an
example on how these patterns can be defined in a hypothetical case where we
want to run test cases as the webserver user instead:
TESTIMAGE_BOOT_PATTERNS = "send_login_user search_login_succeeded"
TESTIMAGE_BOOT_PATTERNS[send_login_user] = "webserver\n"
TESTIMAGE_BOOT_PATTERNS[search_login_succeeded] = "webserver@[a-zA-Z0-9\-]+:~#"
The variable TESTIMAGE_BOOT_PATTERNS defines which patterns to override when
used to communicate with the target when booting, anyone familiar with the
PACKAGECONFIG syntax should have no trouble setting these.
Other patterns would still be set up as default, e.g.
search_reached_prompt would still be login:
The accepted flags for TESTIMAGE_BOOT_PATTERNS are the following:
search_reached_prompt, send_login_user, search_login_succeeded,
search_cmd_finished.
They are prefixed with either search/send, to differentiate if the pattern is
meant to be sent or searched to/from the target terminal.
A working example of this code that falls under the baremetal case mentioned
above along with a test case is present on the meta-freertos layer, which tests
an RTOS image built with OpenEmbedded and automatically runs a test case on it
after booting such image:
As usual, INHERIT += "testimage" needs to be present on local.conf
$ bitbake freertos-demo -c testimage
RESULTS:
RESULTS - freertos_echo.FreeRTOSTest.test_freertos_echo: PASSED (2.00s)
SUMMARY:
freertos-demo () - Ran 1 test in 2.006s
freertos-demo - OK - All required tests passed (successes=1, skipped=0,
failures=0, errors=0)
(From OE-Core rev: 3ab2cbfeff371e8791b031a2852eeef80101a831)
Signed-off-by: Alejandro Hernandez Samaniego <aehs29@gmail.com>
Signed-off-by: Alejandro Hernandez Samaniego <alejandro@enedino.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
commmit 6cde67d0a84 enables the use of qemurunner on machines that
only have a single serial port, but still sets the default value
as serial_ports=2 if not provided.
The testimage class does not call qemurunner with a serial_ports
argument, hence always defaulting to two.
Pass the serial_ports argument from the testimage class to allow
tests to run on QEMU machines with a single serial port.
(From OE-Core rev: a50d0163770f0b405a8de8a8a9cccd48c1de4112)
Signed-off-by: Alejandro Hernandez Samaniego <alejandro@enedino.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
start_new_session was added to python3 subprocess in v3.2 and
is meant to take the place of the common use of preexec_fn to
call os.setsid() in the child - as done here.
Update to use the new equivalent.
(From OE-Core rev: c3bd502f31a621394a2f6ea3ae90443ff4ac98a4)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow tests to access the listening port as just introduced.
Note that when using qemu this infrastructure shouldn't be
needed, but we still need to set the port to 0 so that
a listening port is determined automatically (e.g. by the
python http server).
(From OE-Core rev: ca58559fc30842c123907fb5cc68b3356c530862)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're seeing huge delays on the autobuilder during oe-selftest builddir
deletion. For example there is a currently running selftest we could do
with the results from and its been going 13 hours, at least 8 of which
was in deletion of the builddirs.
There are a variety of ways we could solve this problem however the
autobuilder has a mechanism for deferred deletion, "clobberdir" which
it already uses for this kind of work.
Whilst in general hardcoding things like this is horrible, I believe
in this case the benefits (and resulting improvements on my sanity
if nothing else) mean this is a case where we should do it.
If/as/when someone can come up with a better solution that is fine
and this can be replaced.
(From OE-Core rev: 51a84937d32a85cbdb7d5b1d1ec69a290d0c303b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some test should not be run in QEMU systems so
add some checks to make that easier
(From OE-Core rev: 1b1e53c4ad33a71d526887d1133598f255a476ec)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: e69f963e548e2f6f211a56406694c029111d7203)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
skipIfFeature will skip a test if a given DIST_FEATURE
or IMAGE_FEATURE is enabled.
(From OE-Core rev: ff2218f7cc3992725dd35499c14ec3396120dcc5)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Do not decode the log content into a string only to re-encode it as
binary data again. Some logs might un-intentionally contain bytes that
do not decode as utf-8, as such preserve the log file content as it was
on disk.
Handle the decoding on the resulttool side, but also handle the failure
to decode the data.
(From OE-Core rev: 20531dc0b8f76a6e37cc856f36cd94077b6aba50)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Handle the streaming of exception content with details data. The
testtools package allows both 'err' and 'details' kwargs but can only
pass one of them to the parent.
To handle the passing of exception traceback and details data at the
same time, encode the traceback into the details object and remove the
'err' arg from the add* result call. This encodes the traceback similar
to how 'err' is handled without any details object. Decoding is already
done by testtools when the traceback is encoded in the details object.
(From OE-Core rev: 3613451825b251784b7673d89db465b9782c3a31)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Autobuilder type infrastructure can benefit from deletion of certain files as
background IO due to the way Linux filesystem priority works.
We have problems where build directories as part of oe-selftest being
delete starves the running tasks of IO to the point builds take much
longer to compelte.
Having this option of running the deletion at "idle" helps a lot with
that. Use the new option added to bb.utils.prunedir().
(From OE-Core rev: d41e7018be56902b7a1be4590e468cd15e02a3b5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the OEPTestResultTestCase class as a mix-in class to provide helper
functions for interacting with ptestresults within the extraresults
object generated by the test case.
This class also provides default compression of log text and log files.
Also add support to resulttool for decoding/decompressing log files
embedded in the test results.
(From OE-Core rev: 06cba9883a5964320969301fd05eeb6bec3e786d)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: ba35bead1108c7d8480b785b2e59f40ea77b5549)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the __oeqa_testtags attribute added by OETestTag and display no, one
or more tags separated by a comma. Also change the formatting of the
output so that the list of tests is formatted as "<test> (<tags>)" and
remove the table header for "id" (it is no longer available).
(From OE-Core rev: d62e577a4e1a5f6accbce9f7bff7317a1162d72d)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rework OETestTag so that it does not rely on the existing decorator code
base and instead inserts the tags into an attribute on the decorated
target (e.g. class/type or method). This allows the use of OETestTag on
classes and method.
In order to filter tagged tests rework the loaders filtering code,
removing the generic-ness (with validation and attributes/etc.) and
replace it with a "tags_filter" parameter which is a function that
filters a test based on the tags it has. This allows the loader user to
filter on tags in more specific ways (e.g. include all untagged tests
and any tests tagged with foo). Plumb all this through the context code
and testing code.
Update the associated tests to pass correctly with the changes.
(From OE-Core rev: b8a4a4c2de68110d74607cb9807c9e741ca9441c)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Implement handling of extra result (e.g. ptestresult) collection with
the addition of a "extraresults" extraction function in OETestResult. In
order to be able to serialize and deserialize the extraresults data,
allow OETestResult add* calls to take a details kwarg. The subunit
module can handle cross-process transfer of binary data for the details
kwarg. With a TestResult proxy class to sit inbetween to encode and
decode to and from json.
(From OE-Core rev: b0831d43606415807af80e2aa1d0566d0b8c209c)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These two tests relied on the context containing the results information.
This was moved into the OETestResults class.
(From OE-Core rev: ddad00bfec3b10b5a15a2a8eb57612bb5968f51f)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
At some point the modules in tests/cases/loader/invalid/ were removed,
this test relied on having tests/cases/loader/invalid/oetag.py to
trigger a ImportError in the loader module. Skip this test.
(From OE-Core rev: cf79aa6383e2a2773e53d5b3082154777646cda4)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For now, even if we have specified to skip the whole module/class via
command line, e.g., `oe-selftest -R gotoolchain', the class setup method
is still run. This at least results in unnecessary builds, and at worst
results in ERROR, if the setup method fails.
So improve the skipping mechanism to avoid class setup method to run
when specified to skip.
(From OE-Core rev: b0b79bf65f5e5e65958090a4a88622b42df896bf)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently `oe-selftest -R a' will skip 'archiver' tests. This is
not expected. Fix it so that the '-R' should be followed by actual
module/class/test names.
(From OE-Core rev: de3b070fc2ddd0b63a324679ec5adbe30142fc22)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current codes to skip test cases are logically correct, but they
do not work correctly in reality. It does skip the tests as the command
line argument specifies, but the related information is wrong.
e.g.
$ oe-selftest -R archiver bblayers runtime_test
2019-06-17 09:24:53,764 - oe-selftest - WARNING - meta-selftest layer not found in BBLAYERS, adding it
2019-06-17 09:25:06,309 - oe-selftest - INFO - Adding layer libraries:
2019-06-17 09:25:06,310 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta/lib
2019-06-17 09:25:06,310 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta-yocto-bsp/lib
2019-06-17 09:25:06,310 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta-selftest/lib
2019-06-17 09:25:06,312 - oe-selftest - INFO - Running bitbake -e to test the configuration is valid/parsable
2019-06-17 09:25:10,521 - oe-selftest - INFO - Adding: "include selftest.inc" in /buildarea5/chenqi/SWAT/poky/build-selftest/conf/local.conf
2019-06-17 09:25:10,521 - oe-selftest - INFO - Adding: "include bblayers.inc" in bblayers.conf
2019-06-17 09:25:10,522 - oe-selftest - INFO - test_archiver_allows_to_filter_on_recipe_name (archiver.Archiver)
2019-06-17 09:25:10,522 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "runtime_test"'
2019-06-17 09:25:10,522 - oe-selftest - INFO - Skip by the command line argument "runtime_test"
2019-06-17 09:25:10,523 - oe-selftest - INFO - test_archiver_filters_by_type (archiver.Archiver)
2019-06-17 09:25:10,523 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "runtime_test"'
2019-06-17 09:25:10,523 - oe-selftest - INFO - Skip by the command line argument "runtime_test"
The archiver.Archiver.xxx tests should be skipped by 'archiver' command line
argument, not 'runtime_test'.
Change to use a function generator to achieve the desired effect. After the change,
the effect is as follows.
$ oe-selftest -R archiver bblayers runtime_test
2019-06-17 09:19:06,223 - oe-selftest - WARNING - meta-selftest layer not found in BBLAYERS, adding it
2019-06-17 09:19:19,598 - oe-selftest - INFO - Adding layer libraries:
2019-06-17 09:19:19,599 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta/lib
2019-06-17 09:19:19,599 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta-yocto-bsp/lib
2019-06-17 09:19:19,599 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta-selftest/lib
2019-06-17 09:19:19,602 - oe-selftest - INFO - Running bitbake -e to test the configuration is valid/parsable
2019-06-17 09:19:24,368 - oe-selftest - INFO - Adding: "include selftest.inc" in /buildarea5/chenqi/SWAT/poky/build-selftest/conf/local.conf
2019-06-17 09:19:24,368 - oe-selftest - INFO - Adding: "include bblayers.inc" in bblayers.conf
2019-06-17 09:19:24,369 - oe-selftest - INFO - test_archiver_allows_to_filter_on_recipe_name (archiver.Archiver)
2019-06-17 09:19:24,369 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "archiver"'
2019-06-17 09:19:24,369 - oe-selftest - INFO - Skip by the command line argument "archiver"
2019-06-17 09:19:24,369 - oe-selftest - INFO - test_archiver_filters_by_type (archiver.Archiver)
2019-06-17 09:19:24,370 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "archiver"'
2019-06-17 09:19:24,370 - oe-selftest - INFO - Skip by the command line argument "archiver"
2019-06-17 09:19:24,370 - oe-selftest - INFO - test_archiver_filters_by_type_and_name (archiver.Archiver)
2019-06-17 09:19:24,370 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "archiver"'
2019-06-17 09:19:24,371 - oe-selftest - INFO - Skip by the command line argument "archiver"
2019-06-17 09:19:24,371 - oe-selftest - INFO - test_archiver_srpm_mode (archiver.Archiver)
2019-06-17 09:19:24,371 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "archiver"'
2019-06-17 09:19:24,372 - oe-selftest - INFO - Skip by the command line argument "archiver"
2019-06-17 09:19:24,372 - oe-selftest - INFO - test_bitbakelayers_add_remove (bblayers.BitbakeLayers)
2019-06-17 09:19:24,373 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "bblayers"'
2019-06-17 09:19:24,373 - oe-selftest - INFO - Skip by the command line argument "bblayers"
2019-06-17 09:19:24,373 - oe-selftest - INFO - test_bitbakelayers_createlayer (bblayers.BitbakeLayers)
2019-06-17 09:19:24,373 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "bblayers"'
2019-06-17 09:19:24,374 - oe-selftest - INFO - Skip by the command line argument "bblayers"
[snip]
(From OE-Core rev: 50004f431a71c71af4acf0f25403fee5a8447eab)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We continued to see encoding problems with ssh commands run in oeqa. After much
research the conclusion was we should use ignore the errors since some occasional bad
locale encoding is better than the unicode decoding issues we were seeing which crashed
large parts of tests.
(From OE-Core rev: b3bae8aba5b897c1afcc8bf4ad8929251812d2b5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently setupClass errors were not being mapped back to the failing tests
and they were hence being marked as UNKNOWN and the test statistics were
inaccurate.
This is because whilst the errors were being encoded into the test results
stream, the decoder doesn't cope with an error outside a testStart event.
We patch in an addError handler to the outsideTest parser so that this
does get handled in a way similar to the non-concurrent case.
It would be nice if we didn't have to do this but there doesn't seem
to be any other way to fix this other than forking subunit.
We also make a minor change so another of our changes can cope with
tests without a start time.
(From OE-Core rev: 8f7352ed9c1a3e82689b842b7f87e469ebf2e48f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The string format for subunit setupClass/setupModule failures is slightly
different, tweak the regex to correctly handle both cases.
(From OE-Core rev: 425fbba9348420df72de5c6292f50acaf2023d0b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of showing:
RESULTS - ptest.PtestRunnerTest.test_ptestrunner - Testcase 1600: UNKNOWN (32.30s)
map unexpectedSuccesses to PASSED and improve the way they're displayed. We
expect/allow ptest runner to fail but if it passes we should handle it correctly.
(From OE-Core rev: 7885939ca3dea9704185e93469fe515c17eb8017)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds SPDX license headers in place of the wide assortment of things
currently in our script headers. We default to GPL-2.0-only except for the
oeqa code where it was clearly submitted and marked as MIT on the most part
or some scripts which had the "or later" GPL versioning.
The patch also drops other obsolete bits of file headers where they were
encoountered such as editor modelines, obsolete maintainer information or
the phrase "All rights reserved" which is now obsolete and not required in
copyright headers (in this case its actually confusing for licensing as all
rights were not reserved).
More work is needed for OE-Core but this takes care of the bulk of the scripts
and meta/lib directories.
The top level LICENSE files are tweaked to match the new structure and the
SPDX naming.
(From OE-Core rev: f8c9c511b5f1b7dbd45b77f345cb6c048ae6763e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These IDs refer to testopia which we're no longer using. We would now use the test
names to definitively reference tests and the IDs can be dropped, along with their
supporting code.
(From OE-Core rev: 8e2d0575e4e7036b5f60e632f377a8ab2b96ead8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This code really needs to be rewritten to not split potential
multibyte characters, for now work around it to avoid exceptions like:
File "/home/pokybuild/yocto-worker/qa-extras2/build/meta/lib/oeqa/core/target/ssh.py", line 211, in run
data = reader.read(1024, 4096)
File "/usr/lib64/python3.6/codecs.py", line 503, in read
newchars, decodedbytes = self.decode(data, self.errors)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0x92 in position 0: invalid start byte
(From OE-Core rev: 17e87510378f2729208a8262695f28e1efe5eb4c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some CI pipelines might perform further processing of the test output
(for instance, to plot some metrics into a chart). However, Since `thud`
we switched away from the XML-based jUnit reporting, and at the same
time we lost the ability of collecting the stdout and stderr of the
various tests.
We now restore this functionality by adding `stdout` and `stderr` keys
to the JSON reports. This behavior is off by default; in order to enable
it, one must set the `TESTREPORT_FULLLOGS` variable in the bitbake
configuration.
(From OE-Core rev: fd0048630ece5b21efb3a79e97046be0ab2a1514)
Signed-off-by: Alberto Mardegan <amardegan@luxoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is particularly useful when setting up GL tests.
(From OE-Core rev: 167a46775059b782c6f82ce8c5a47b27262e95d4)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous code assumed builddir and meta-selftest are in the same dir, but
this isn't always true, builddir can be anywhere, use get_test_layer() to
locate meta-selftest can fix the problem.
(From OE-Core rev: 56d2493a9adfcc47ae7e265439e05ff42cdbbbbf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable qemu for slirp. Initialize Qemurunner with slirp. Setup ip
and port attribute to enable connection with qemu running with slirp.
[YOCTO#10713]
(From OE-Core rev: 815e05ac4abb42238d6fdeb15d7426759e059ce1)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Qemu do not use the ip input from external. It will
retrieve ip from QemuRunner instance and assign
ip value.
(From OE-Core rev: 14d99dc6c39c963ba3e0d9a30274846bd5369210)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Avoid an unclosed file per thread warning when running selftests concurrently
by closing the result stream.
(From OE-Core rev: 33a4a076e8aa72a872807332501e7f5ae1cee0e2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Avoid the warning "DeprecationWarning: invalid escape sequence \(" by marking
the regexs correctly.
(From OE-Core rev: cb49980fa4a158d5529902df731dec61a8c9b3d4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Clean up the warning:
meta/lib/oeqa/core/loader.py:27: DeprecationWarning: inspect.getargspec() is deprecated, use inspect.signature() or inspect.getfullargspec()
_failed_test_args = inspect.getargspec(unittest.loader._make_failed_test).args
(From OE-Core rev: d2deb66830be2d44532fea3d5db763b57778252a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We want to see failures/errors listed last since this is the most easily
visible part of the log on consoles or autobuilder output and makes
human processing easier rather than having to scroll up and scan for
a single failure.
(From OE-Core rev: 7954b19020c28a4120bc1671aa81b9e1e2b05fa2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Its useful to have the counts of success/failure/error/skipped at the end of the
results to allow for easier human reading of what happened.
(From OE-Core rev: 080d8900d470a8e7f929b0c5c2765ad461744fbb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows the ptest results from ptest-runner, run in an image to be
transferred over to the resulting json results output.
Each test is given a pass/skip/fail so individual results can be monitored
and the raw log output from the ptest-runner is also dumped into the
results json file as this means after the fact debugging becomes much easier.
Currently the log output is not split up per test but that would make a good
future enhancement.
I attempted to implement this as python subTests however it failed as the
output was too confusing, subTests don't support any kind of log
output handling, subTest successes aren't logged and it was making things
far more complex than they needed to be.
We mark ptest-runner as "EXPECTEDFAILURE" since its unlikely every ptest
will pass currently and we don't want that to fail the whole image test run.
Its assumed there would be later analysis of the json output to determine
regressions. We do have to change the test runner code so that
'unexpectedsuccess' is not a failure.
Also, the test names are manipuated to remove spaces and brackets with
"_" used as a replacement and any duplicate occurrences truncated.
(From OE-Core rev: a13e088942e2a3c3521e98954a394e61a15234e8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is no point in adding empty log entries to the json result files, only
add them if there is log data.
(From OE-Core rev: da6aef0b6bd4655805f7f743858d4e04341f75ed)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As part of the solution to replace Testopia to store testresult,
OEQA need to output testresult into single json file, where json
testresult file will be stored in git repository by the future
test-case-management tools.
The json testresult file will store more than one set of results,
where each set of results was uniquely identified by the result_id.
The result_id would be like "runtime-qemux86-core-image-sato", where
it was a runtime test with target machine equal to qemux86 and running
on core-image-sato image. The json testresult file will only store
the latest test content for a given result_id. The json testresult
file contains the configuration (eg. COMMIT, BRANCH, MACHINE, IMAGE),
result (eg. PASSED, FAILED, ERROR), test log, and result_id.
Based on the destination json testresult file directory provided,
it could have multiple instances of bitbake trying to write json
testresult to a single testresult file, using locking a lockfile
alongside the results file directory to prevent races.
Also the library class inside this patch will be reused by the future
test-case-management tools to write json testresult for manual test
case executed.
(From OE-Core rev: 00e03b5004f1eb6d59295544b3a8620504278f51)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Refactor the original _getDetailsNotPassed method to return
testresult details (test status and log), which will be reused
by future OEQA code to write json testresult.
Take the opportunity to consolidate and simplify the logic used
to gather test status and log within the TestResult instance.
(From OE-Core rev: 79ee7d1c371a86edeb61c99679985118da657e5d)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
skipIfInDataVar will skip a test if a value is in a certain variable.
(From OE-Core rev: 10b935c713748346aea6c36c2f41e0ae6c320821)
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Its a pain to have to wait until oe-selftest finishes to see the
failures for example.
(From OE-Core rev: 4c499a1b10a0c2647b6a753b8f9cd934ae4ad0da)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 5ccd2284e5dd994230e9e229b7931d049c9f46c0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Periodically we'd see:
NOTE: core-image-sato-1.0-r0 do_testsdk: ======================================================================
NOTE: core-image-sato-1.0-r0 do_testsdk: ERROR: broken-runner
NOTE: core-image-sato-1.0-r0 do_testsdk: ----------------------------------------------------------------------
NOTE: core-image-sato-1.0-r0 do_testsdk: testtools.testresult.real._StringException: Traceback (most recent call last):
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/meta/lib/oeqa/core/utils/concurrencytest.py", line 122, in _run_test
test.run(process_result)
File "/usr/lib/python3.6/site-packages/subunit/__init__.py", line 1194, in run
protocol = TestProtocolServer(result, self._passthrough, self._forward)
File "/usr/lib/python3.6/site-packages/subunit/__init__.py", line 514, in __init__
stream = stream.buffer
AttributeError: '_io.StringIO' object has no attribute 'buffer'
which seems to occur if a result arrives before all the runner threads
have started. The runner's result handling changes sys.stdout to a buffer
temporarily which can be seen in other threads and it can sometimes fail.
Since the tests are running in a separate process we don't need this buffer
handling in the concurrent case so only set when not parallelising. The
concurrent class handle setting buffer mode internally.
(From OE-Core rev: e2c66aa0f74d19fbc7e56af1fb440ad6473d3a8e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this, error output such as that in the teardown can be lost
and processes may recieve signals they're not expecting causing other
strange errors.
(From OE-Core rev: 1e3f44737a15feb3128ba7fc0dbe896dd8782e07)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
oe-selftest -r <invalid test name>
currently triggers a traceback. Ensure this doesn't happen and the user gets a
sensible error message.
(From OE-Core rev: f2042bf3638ed4edfb167e7f7d4be6da60997ead)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Checking if the dependency had any failure is unreliable, for example
if the underlying data doesn't get transferred and the list is empty,
success of the dependency is assumed.
Since we now have success data available, change the code to use it.
(From OE-Core rev: 4abba4c30d5a6163a968a119395a679e5e281ab4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Trevor Gamblin
Alejandro Hernandez Samaniego
André Draszik
Richard Purdie
Armin Kuster
Nathan Rossi
Chen Qi
Mardegan, Alberto
Alexander Kanavin
Robert Yang
Yeoh Ee Peng
Richard Leitner