| Age | Commit message (Collapse) | Author |
|---|
|
It was mentioned that when developing a BSP, the information about what
definition was used, or what fragments have been applied is not obvious
and requires looking at the code.
With this change, we can trigger a full summary of the meta data gathering
phase when KCONF_AUDIT_LEVEL > 0.
Sample output follows:
NOTE: do_kernel_metadata: for summary/debug, set KCONF_AUDIT_LEVEL > 0
NOTE: kernel meta data summary for qemux86-64 (standard):
NOTE:
======================================================================
NOTE: BSP entry point / definition:
/build/tmp/work/qemux86_64-poky-linux/linux-yocto/5.10.34+gitAUTOINC+bca3bfbc74_85c17ad073-r0/kernel-meta/bsp/common-pc-64/common-pc-64-standard.scc
NOTE: Fragments from SRC_URI:
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/xt-checksum.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/ebtables.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/vswitch.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/lxc.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/docker.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/cgroup-hugetlb.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/xen.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/kubernetes.scc
NOTE: KERNEL_FEATURES: features/nfsd/nfsd-enable.scc
features/debug/printk.scc features/kernel-sample/kernel-sample.scc
features/netfilter/netfilter.scc cfg/virtio.scc
features/drm-bochs/drm-bochs.scc cfg/sound.scc cfg/paravirt_kvm.scc
features/scsi/scsi-debug.scc features/gpio/mockup.scc
features/aufs/aufs-enable.scc cfg/fs/flash_fs.scc cfg/virtio.scc
NOTE: Final scc/cfg list:
/build/tmp/work/qemux86_64-poky-linux/linux-yocto/5.10.34+gitAUTOINC+bca3bfbc74_85c17ad073-r0/kernel-meta/bsp/common-pc-64/common-pc-64-standard.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/xt-checksum.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/ebtables.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/vswitch.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/lxc.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/docker.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/cgroup-hugetlb.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/xen.scc
/poky/meta-virtualization/recipes-kernel/linux/linux-yocto/kubernetes.scc
features/nfsd/nfsd-enable.scc features/debug/printk.scc
features/kernel-sample/kernel-sample.scc
features/netfilter/netfilter.scc cfg/virtio.scc
features/drm-bochs/drm-bochs.scc cfg/sound.scc cfg/paravirt_kvm.scc
features/scsi/scsi-debug.scc features/gpio/mockup.scc
features/aufs/aufs-enable.scc cfg/fs/flash_fs.scc cfg/virtio.scc
(From OE-Core rev: b95b11e130e91cb7c5e65f0f9a1c655bcbcbc919)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is not enabled or tested by default, and has never been
ported to python 3 upstream[1], which means it doesn't work at all
with plain poky. If you need it, please put it in a separate layer
and/or modernize to work with py3.
https://salsa.debian.org/installer-team/mklibs/-/blob/master/src/mklibs
(From OE-Core rev: 908df863b419d1cad7317153101fc827e7e3a354)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Under certain build patterns, warnings about missing manifests can appear. These
are real issues where the manifest was removed and shouldn't have been.
Martin Jansa was able to find a reproducer of:
MACHINE=qemux86 bitbake zlib-native
echo 'PR = "r1"' >> meta/recipes-core/zlib/zlib_1.2.11.bb
MACHINE=qemux86-64 bitbake zlib-native
MACHINE=qemux86 bitbake zlib-native
<the zlib-native manifest is now removed along with the sysroot-components contents>
The code maintains a per machine list of stamps but a per PACAGE_ARCH list of
stamp/manifest/workdir mappings. The latter is only appended to for speed with
the assumption that once stamps are gone, the code wouldn't trigger.
The code only ever appends to the mapping list (for speed/efficency under lock)
meaning that multiple entries can result where the stamp/workdir differs due to
version changes but the manifest remains the same.
By switching MACHINE part way through the build, the older stamp is referenced
and the manifest is incorrectly removed as it matches an now obsolete entry in
the mapping file.
There are two possible fixes, one is to rewrite the mapping file every time
which means adding regexs, iterating and generally complicating that code. The
second option is to only use the last mapping entry in the file for a given
manifest and ignore any earlier ones. This patch implments the latter.
Also drop the stale entries if we are rewriting it.
(From OE-Core rev: 63da9a4f889c5b0e41bc8ec08abe0acea1546479)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Node modules may need to be built against multiple Node
versions. Setting nodedir in the NPM configuration stops older ways of
doing this, such as setting npm_config_target and npm_config_disturl,
from working.
(From OE-Core rev: 14795ee305f3c11fcc31cc7ca815b8ff1020e29a)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows reusing them in nativesdk-meson without copy-pasting code.
(From OE-Core rev: f2715f5f2a56f9b660f9f0fe2933ec231a2dd8c0)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 5c5f0d21799c2bff6875ef9fdc22d11035ea3320)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Only qemux86* and qemuarm* support SMP with our current configurations so
rework qemu SMP enabling to account for that and only use it on the architectures
where it works.
(From OE-Core rev: ee371325ce651cc113e43bdeb5d8986d5b84a3f4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Each of the cores is mapped to a thread on the host, this
should speed up things inside qemu which can take advantage of that.
(From OE-Core rev: 56f98d12a79585a4d4c459160f39403e05b620a5)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for MACHINE=qemuriscv64.
$ runqemu nographic
KERNEL: [tmp/deploy/images/qemuriscv64/baremetal-helloworld-image-qemuriscv64.bin]
MACHINE: [qemuriscv64]
FSTYPE: [bin]
runqemu - INFO - Running tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-riscv64
Hello OpenEmbedded on RISC-V 64!
(From OE-Core rev: 31fde82640bf0d185eab55d2cbaf663c9faae801)
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandro@enedino.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Particularly, numactl, numpy and libseccomp are disabled for now
due to failures or lack of qemu support. The rest have been verified
to pass quickly.
[RP: Fix multilib recipe handling]
(From OE-Core rev: 8bb5da87000ade519529e44181448244bd94d4f5)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This seems to be the gtk-doc successor, and gnome
projects such as pango and gdk-pixbuf have started
transitioning to it.
(From OE-Core rev: f87bb7d848015c371095ef3ff423eee81e6d8ecd)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Incremental build in Docker fails with:
OSError: [Errno 18] Invalid cross-device link
when source and destination are on different overlay filesystems.
Rather than adding fallback code to every call site, use a new wrapper
in bitbake which detects this case and falls back to shutil.move
which is slower but will handtle the overlay docker filesystems correctly.
[YOCTO #14301]
(From OE-Core rev: 656a65b2b84e7d529b89cf5de7eb838f902d84a2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This expands the error message when a network failure is detected.
It happens that some ISPs or networks block the default example.com
domain. Therefore, instead of disabling network access, it
lets the user know how to modify the test URL.
(From OE-Core rev: 62c94bb925543c1e1c5af3c751913d9f06d9597d)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of having find directly invoke touch for each file in the root
file system, pass a list to xargs for batching. This significantly
reduces the number of times the touch program is invoked and speeds up
the do_image task time:
PKG TASK ABSDIFF RELDIFF CPUTIME1 -> CPUTIME2
my-image do_image -45.3s -94.2% 48.1s -> 2.8s
Cumulative cputime:
-44.3s -92.3% 00:48.1 (48.1s) -> 00:03.7 (3.7s)
(From OE-Core rev: 15c65f90a3aa1e98c2beab2539403157df1fca08)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since these files are passed to merge_config.sh its better to use a
sorted list, so we can be sure that this list is always fed in same
order irrespective of python versions on host
(From OE-Core rev: 3d949f286c29bcaaf4dfc0aaffd15f129d1bab2d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This will help identifying packages using __TIME__, __DATE__ and
__TIMESTAMP__ macros in code, its a warning from the compiler and the
packages which use -Werror will break the build with this and where they
don't we will atleast have a warning in the build logs
(From OE-Core rev: 20335cd89001f5fb159f5f1b0c3bd5e40b8b2fb5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously "at interval" and "on failure" logs were collected
in separate files. Collect both types of logging in the same
file for better analysis.
Introduced new variable which allows different set of commands
to be run by the different logging, interval or failure. The
variables are BB_LOG_HOST_STAT_CMDS_INTERVAL and
BB_LOG_HOST_STAT_CMDS_FAILURE respecteviely.
(From OE-Core rev: 4fbf422351668f755a14811ac39161c889087e81)
Signed-off-by: Sakib Sajal <sakib.sajal@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Link to the canonical filename of a license as only this one exists.
Fixes commit 670fe71dd18ea675f35581db4a61fda137f8bf00
[license_image.bbclass: use canonical name for license files].
(From OE-Core rev: 64b1ba978e079c345e1f7fbd1bf44052fc3dd857)
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Find and report symlinks which point to a non-existing file.
(From OE-Core rev: 81809a1ffe67aade1b2ed66fe95044ffbf7d3df8)
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds support for the Qemu Machine Protocol [0] extending
the current dump process for Host and Target. The commands are
added in the testimage.bbclass.
Currently, we setup qemu to stall until qmp gets connected and
sends the initialization and continue commands, this works
correctly. If the UNIX Socket does not exist, we wait an timeout
to ensure to socket file is created.
With this version, the monitor_dumper is created in OEQemuTarget
but then set in OESSHTarget as that's where we get the SSH failure
happens. Python's @property is used to create a setter/getter type
of setup in OESSHTarget to get overridden by OEQemuTarget.
By default the data is currently dumped to files for each command in
TMPDIR/log/runtime-hostdump/<date>_qmp/unknown_<seq>_qemu_monitor as
this is the naming convenstion in the dump.py code.
We use the qmp.py from qemu, which needs to get installed in the
recipe-sysroot-native of the target image.
[0] https://github.com/qemu/qemu/blob/master/docs/interop/qmp-spec.txt
(From OE-Core rev: 42af4cd2df72fc8ed9deb3fde4312909842fcf91)
Signed-off-by: Saul Wold <saul.wold@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It chdirs to ${S} at the beginning of task do_kernel_checkout. Then it
removes ${S} when it still resides in ${S}. It may fail to run the task
do_kernel_checkout when bitbake is called by third-part wrapper script.
So chdir to ${WORKDIR} by default for do_kernel_checkout. And it will
chdir to ${S} afterwards in task do_kernel_checkout.
(From OE-Core rev: cf0e3397d3f86c7ea1f3c66c50a44d6205f5921b)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is fallible to remove ${B} in directory ${B} itself. And it does fail
when call bitbake by third-party wrapper script.
Use flag 'cleandirs' to remove ${B} first if build out of source tree.
(From OE-Core rev: 0fb6280432a36985590d9a714a5f11164aaebb51)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add tests to ensure COREBASE/TMPDIR doon't contain ".." as this causes
hard to understand build failures.
Also rework the code to test TMPDIR and COREBASE for all the patterns
since they may be set differently and one may contain problematic
characters.
[YOCTO #14111]
(From OE-Core rev: f22a6e46d003aba516a9a0cc7f94eae678d846b7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It has been reported that '%' characters in build paths break with python
exceptions, probably due to confusion with python string escaping. Whilst it
is probably fixable, showing the user a human readable error is better given
it doesn't work.
[YOCTO #14282]
(From OE-Core rev: 31a3cf78452270131a657be45e76569515cff7ef)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 2abe18682192e7b38b9af5a5043906f2f069648f)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
as cpan release versions are almost always follow an a.b version scheme,
it's better to filter out beta releases such as a.b.c.
Use the first resource fetched from https://cpan.metacpan.org as base
for calculating the needed regex.
In case nothing can be calculated fall back to nothing.
Add this to cpan-base to enable it for new & old style cpan integration.
(From OE-Core rev: 3df2cf383b58a3100bd78ebb0369047221121512)
Signed-off-by: Konrad Weihmann <kweihmann@outlook.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a recipe inherits cross-canadian and contains "nativesdk" in
BBCLASSEXTEND and meta-mingw is included and multiconfig is enabled,
bitbake will generate the correspending recipe. As meta-mingw sets
SDK_OS to "mingw32", that's what TARGET_OS will be set to as well.
Thus, currently such a recipe won't pass the check and fail with
a message:
Building cross-candian for an unknown TARGET_SYS
(x86_64-mysdk-mingw32), please update cross-canadian.bbclass
Even when building an SDK targeting Linux, but the mentioned conditions
are met, bitbake will try to generate the corresponding recipe and fail.
As the described combination seems valid, including "mingw32" into the
whitelist unconditionally as a fix is suggested.
(From OE-Core rev: d9306e8f9dbdbd30382f0bc0f0a1af75e702a2aa)
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Further to 50ff9afb39, only detect code changes in submodules that are
subdirectories of the EXTERNALSRC directory.
The (undocumented) git submodule--helper returns a path
for each submodule relative to the top of the repo.
Don't add submodules that are not within our source subtree.
[YOCTO #14333]
(From OE-Core rev: 1c18225d3ef94a41fc073ae87c163b68e6d46571)
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit 4525310d49d115a37705f04ac5c03d639e5e8f8c.
Further to 50ff9afb39, only detect code changes in submodules that are
subdirectories of the EXTERNALSRC directory.
The (undocumented) git submodule--helper returns a path
for each submodule relative to the top of the repo.
Don't add submodules that are not within our EXTERNALSRC subtree.
If we unpack one git repo inside another, like this:
SRC_URI = "git://${GIT_SERVER}/repo1;name=repo1;destsuffix=repo1 \
git://${GIT_SERVER}/repo2;name=repo2;destsuffix=repo1/repo2 \
"
Git status reports, for repo1:
Untracked files:
(use "git add <file>..." to include in what will be committed)
repo2/
If we run `devtool modify` on this recipe, do_patch runs with:
PATCHTOOL = "git"
PATCH_COMMIT_FUNCTIONS = "1"
The `patch_task_postfunc` (patch.bbclass, line 82) runs a `git add .` on the
top-level repo1, leaving the checkout in an invalid state. The following git
warning does not appear in the log:
$ git add .
warning: adding embedded git repository: repo2
hint: You've added another git repository inside your current repository.
hint: Clones of the outer repository will not contain the contents of
hint: the embedded repository and will not know how to obtain it.
hint: If you meant to add a submodule, use:
hint:
hint: git submodule add <url> repo2
hint:
hint: If you added this path by mistake, you can remove it from the
hint: index with:
hint:
hint: git rm --cached repo2
hint:
hint: See "git help submodule" for more information.
$ git submodule status
fatal: no submodule mapping found in .gitmodules for path 'repo2'
No further git submodule commands can be run on the checkout.
We could enhance the `patch_task_postfunc` to look for any embedded git
checkouts and add them as submodules, but this seems unnecessary complexity for
an obscure edge-case. Although the git repo is left in an invalid state with
respect to the submodules, it still serves the purpose required by devtool:
To take further commits, and generate patch files from them.
We are still able to run these commands to examine any submodules,
where git submodule--helper reports paths relative to the top of the checkout:
$ git ls-files --stage | grep ^160000
160000 5feee12d6e974dd8c0614cf5b593380b046439a5 0 repo2
$ git submodule--helper list
160000 5feee12d6e974dd8c0614cf5b593380b046439a5 0 repo2
When a recipe sets EXTERNALSRC to a subdirectory of the git checkout, we test
for the existence of the reported submodule paths within the EXTERNALSRC
directory.
The latest versions of git submodule--helper accept a path to a subdirectory and
correctly report no submodules within that subdirectory. Regrettably, we still
support git versions that don't accept a path to a subdirectory.
[YOCTO #14333]
(From OE-Core rev: 2055718fdd19f925e236d67823017323bbd92a4b)
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 36de56496bc07c321162555d603fac756297911a)
Signed-off-by: Daniel Ammann <daniel.ammann@bytesatwork.ch>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* The kernel-fitimage class adds a do_assemble_fitimage_initramfs task
regardless of INITRAMFS_IMAGE_BUNDLE setting, which in some cases can
result in that task running after do_uboot_assemble_fitimage and
overwriting the u-boot-spl.dtb file with the pristine version (without
public key). Fix this by making do_uboot_assemble_fitimage dependant
on both do_assemble_fitimage_* tasks, regardless of the aforementioned
setting.
* Adjust 'type' and 'os' on the U-boot fitimage its script so that
mkimage/dumpimage can recognize them.
* Move the deployment of the u-boot-spl-nodtb files outside of
concat_spl_dtb_helper(), so that we can better isolate the scenarios
of creating an (unsigned) U-Boot fitimage versus also signing it. This
prevents some stale files from being deployed in the images directory.
* Remove any u-boot-fitImage and u-boot-its files from build tree, in
case the build tree is being reused across bitbake calls.
(From OE-Core rev: dc26d35e0935f30af55a3d2cb5c501d1b5c35437)
Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 6a2a1a0d38499b2537e1b39ac34677cd52b81fc0)
Signed-off-by: Yann Dirson <yann@blade-group.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Duplicate the variables governing u-boot signing so that we can have a
different set of keys/parameters signing the SPL.
(From OE-Core rev: 0e6b0fefa02356afeb11a32dfee7f0c7c250ab7f)
Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the necessary infrastructure to create a U-boot proper fitimage,
sign it (using the same keys as the kernel-fitimage), and put the public
key in the SPL binary so that verified SPL boot can be accomplished.
(From OE-Core rev: 5af4dfe83c2f6509015916262be32fc09bc9714d)
Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move some definitions from u-boot.inc into uboot-config.bbclass and
similarly from kernel-fitimage.bbclass into uboot-sign.bbclass, so that
they can be useful when signing the U-boot proper fitimage, for a
verified-boot SPL.
(From OE-Core rev: cc6c3e31526d3b6ef3a87ba5e548fcad7483bd51)
Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have a working theory that IO queues on the autobuilder are impacting
runtime testing under qemu, particularly async writes which inice does not
influence. We already pass the snapshot option to qemu which copies the
image and runs out of the copy. Add in the ability to copy the image to
a specificed location which can be a tmpfs. This means that writes to the
image would no longer be blocked by other writes to disk in the system.
Preliminary tests show that this does improve the qemu errors at the expense
of sometimes showing qemu startup timeouts as on a loaded system with a large
test image, it can take longer than 120s to copy the image to tmpfs. Having
a most consistent failure mode for loaded tests is probably desireable though.
(From OE-Core rev: fd1c26ab426c3699ffd8082b83d65a84c8eb8bff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some image recipes uses ${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY} to create
their images. Force the re-creation of those symlinks pointing to the
u-boot-fitImage in case UBOOT_FITIMAGE_ENABLE is set.
(From OE-Core rev: 11a016aaf243a110f7139ea052fd4e568aad40dd)
Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
`ROOTFS` is optional. It can be empty if the live image doesn't require
a rootfs. In such cases, the build doesn't depend on
`do_image_{LIVE_ROOTFS_TYPE}`.
(From OE-Core rev: 96f47c39f1d17f073243913d524bde84add41d8f)
Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Setting the 'func' flag on the commands variables ensures that they are parsed
as shell, and therefore that the referenced commands contents are included in
checksums. Doing this only in image.bbclass means that this is missing in
recipes that are not images, but which inherit populate_sdk or populate_sdk_base
directly, so move it to the latter.
[YOCTO #13998]
(From OE-Core rev: edc28907ce19a7298059dd388933c58a9c6c28b9)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For POPULATE_SDK_POST_TARGET_COMMAND, POPULATE_SDK_POST_HOST_COMMAND, and SDK_POSTPROCESS_COMMAND, the appropriate entries were added to vardepvalueexclude, but we want them in vardepsexclude as well.
(From OE-Core rev: 554b17e0bbe5190e4b03121f2ed06f4845012a71)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the classes/populate_sdk_ext.bbclass the system already copies a number
of configurations, such as the hash equivalency data. However, the PR
service was being handled.
The new code works by checking if PRSERV_HOST is defined, if it is, use
the existing export functions to write out a conf/prserv.inc file into
the eSDK. On eSDK install, if a conf/prserv.inc file is present we then
import this file into the system.
This mechanism will work if the PRSERV_HOST is local or remote, as it pulls
the necessary data from the server and then imports it to a local database
on eSDK installation.
Note: the conf/prserv.inc file is not deleted at this time. It was left
for possible debugging purposes, but removing it is something we could decide
to do in the future.
(From OE-Core rev: e207dabdfaa07cd5ebba1cd7dd58610f7185c7e2)
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Meson now supports native-files, which are the same as cross files but
describe the native build.
By writing and using a native file which describes the tools to use, we
can drop the environment variable overriding.
(From OE-Core rev: 20a5af2583de60969124b4dc15e045ee47516da4)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since pyc cache files are really system specific, no real reason to copy or
generate them during the eSDK build process. Also generating them has the
possibility of re-using inodes that pseudo may have been tracking, leading
a build failure.
(From OE-Core rev: ce8eba263647ae63a722122e28f26af46ae083a0)
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of using du (which has issues as disussed in the previous commit), use
the new oe.utils.directory_size() function.
(From OE-Core rev: d8f1f3a6b024a2ae6631d1ce25421e8d94b69a12)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It isn't immediately obvious what these do, add some better examples
to document them. Also improve the naming for one of the handlers.
This will help make it clear in any tracebacks which code is being
used.
(From OE-Core rev: 2b5c553744804f44a17b61c345e482027e45b71e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The split of util-linux-uuid out from util-linux caused some interesting
sstate file overlap errors on existing build directories. This is a
challenge to handle since util-linux depends on util-linux-uuid and has
overlapping files in package data and deploy/packages directories.
The util-linux build happens later and is what would clean up those files
but it happens too late for uuid.
Fixing this is hard as we don't know the taskhashes until the task
graph is calculated. Once that is ready, we can compare the hashes
with the existing hashes and know which sstate tasks are "stale".
This patch adds a handler which iterates the sstate manifests looking
for matching stamp paths and then removes the manifests along with the
associated stamp files.
(From OE-Core rev: 60e77b1777c6c304aa1d629c4cfdabe0daa22eb1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
some kernel includes kernel-image-image and kernel-devicetree packages.
these patckages are defined in kernel.bbclass
but, when use linux-dummy, these packages are not defined.
so, define them as empty packages for avoiding compile error:
ERROR: Nothing RPROVIDES 'kernel-devicetree'
(From OE-Core rev: 8dbae2dd5ac3de629957ca699f823f5438e80163)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you type something into devpyshell, an exception should be triggered,
but that exception isn't printed out because it is not being flushed out
of the buffer. This patch fixes that issue.
[YOCTO #12156]
(From OE-Core rev: 9f95e82a3b27bfd5177a855326dcad8a5bdf5b2d)
Signed-off-by: Dorinda Bassey <dorindabassey@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
KERNEL_DEVICETREE/EXTERNAL_KERNEL_DEVICETREE
There are user cases that a developer wants to add both in-tree and
out-of-tree devicetrees to fitimage, and this is quite normal, for
instance, a developer might need the devicetrees from kernel source
meanwhile maintaining his/her own devicetree overlays to be applied
on top of them.
To support that, we now allow KERNEL_DEVICETREE and
EXTERNAL_KERNEL_DEVICETREE to be both set in configuration files, and
the devicetrees in EXTERNAL_KERNEL_DEVICETREE have higher priority to
override the same names in KERNEL_DEVICETREE.
(From OE-Core rev: c461b245076be066512ac7b074020f6032056b8d)
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Further to 50ff9afb39, only detect code changes in submodules that are
subdirectories of the EXTERNALSRC directory.
git submodule status returns a path relative to the cwd for each submodule.
We don't add submodules that are not within our source subtree.
(From OE-Core rev: 4525310d49d115a37705f04ac5c03d639e5e8f8c)
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Bruce Ashfield
Alexander Kanavin
Richard Purdie
Mike Crowe
Robert P. J. Day
Alejandro Hernandez Samaniego
Devendra Tewari
Michael Opdenacker
Joshua Watt
Khem Raj
Sakib Sajal
Reto Schneider
Saul Wold
Kai Kang
Ross Burton
Konrad Weihmann
Anatol Belski
Douglas Royds
Daniel Ammann
Klaus Heinrich Kiwi
Yann Dirson
Guillaume Champagne
Christopher Larson
Mark Hatle
Mark Hatle
Ross Burton
Li Wang
Dorinda Bassey
Ming Liu