| Age | Commit message (Collapse) | Author |
|---|
|
This change ensures that the ls /etc/rpm-postinsts runs in the target
at first boot time, rather than at the creation time of the script on
the host.
This was causing the following error in the rootfs log:
+ install -d /srv/ssd/sgw/machines/fri2/tmp/work/fri2-poky-linux/core-image-minimal/1.0-r0/rootfs//etc/rcS.d
+ i=
+ ls /etc/rpm-postinsts/
ls: cannot access /etc/rpm-postinsts/: No such file or directory
(From OE-Core rev: e893cf0b3843701e80f5c9f47be04d1a88e5ed68)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the /etc/rpm-postinsts/ directory was empty, the following error
would occur at system startup.
ERROR: postinst /etc/rpm-postinsts/* failed
This patch fixes this issue.
[YOCTO #3767]
(From OE-Core rev: 202263aeca837dc7b6615a3dc34569c199163733)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If there are postinstall scripts to be run on first boot and
IMAGE_FEATURES contains "read-only-rootfs", we know this will fail on
the target device so just error out during do_rootfs. This check was
already implemented for ipk, so add it to the deb and rpm backends. Also
make all backends use bberror rather than just echo to display the
error.
Fixes [YOCTO #3407].
(From OE-Core rev: 510e377f252dece8850487c30482f83df4a89c7e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Export this variable because package_rpm.bbclass needs it.
[YOCTO #3682]
(From OE-Core rev: 64b01c6c945346b661f294fc8a49bf04a72da3c0)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Debugging code was accidently left in the previous commit. Remove
the code as it prevents multiple concurrent bitbake builds.
(From OE-Core rev: bbd55cc34ca893c7202634fe138cedb2f380be56)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* I have kernel recipe which depends on other recipe to build tiny initramfs
image, without this change it rebuilds not only that initramfs image
but also whole kernel when DATE or TIME is changed and OEBasicHash enabled
* also resolves ERROR shown when bitbake -S is used for image:
ERROR: Bitbake's cached basehash does not match the one we just generated
(/OE/oe-core/openembedded-core/meta/recipes-core/images/core-image-minimal.bb.do_rootfs)!
ERROR: The mismatched hashes were 8c35cdf8a5d09c03941f081dd9f6d8dc and b5d6e2e5952770557c48c5779ddb73fc
(From OE-Core rev: a78d2d21fffd646a0d6e0f02a8355be010a7bd28)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The variable MULTILIB_PACKAGE_ARCHS has been removed in favor of a
repurposed MULTILIB_PREFIX_LIST. The format of this item is now
<libid>:<arch>:<arch1>:...:<archN>. This ensures that we can correctly
translate the libid to one of the supported archs in a tri-lib system.
All of the users of MULTILIB_PREFIX_LIST and MULTILIB_PACKAGE_ARCHS have
been modified accordingly.
Also change the way attempted packages are installed, verify the package
exists in the translate functions, then perform the install in one single
operation. This results in a significantly faster install time.
(From OE-Core rev: ffe6cf3a1c57defdbe8531bdeb588e199177bb6c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Switch over to smart on the target when package-management is enabled.
(From OE-Core rev: 69f258a2422e6a6ae71834dd097ffa00a1784d9e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use Smart to construct the root filesystem for images and the contents
of SDKs rather than the custom scripts around rpm we had previously.
This ensures the result when producing an updated image will be the
same as upgrading to the same package versions from an older image on
the target, as well as allowing us to remove a substantial amount of
code making the rpm classes much easier to follow.
Some bugfixes from Bogdan Marinescu <bogdan.marinescu@intel.com>.
SDK implementation and testing as well as a number of bugfixes from
Mark Hatle <mark.hatle@windriver.com>.
(From OE-Core rev: a726ae7c032fac1aa49ce34180fa2ed2dcaf87d3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove the set +x, and revert to the normal logging behavior.
(From OE-Core rev: e799d771c9ed9e41a900e2e96c23d4ae35d5fe08)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
change
A regression was introduced by commit:190cb591 that it doesn't
consider the situation that some archs contain "_" originally, so it
results in issues when dealing with archs like qemux86_64, x85_64.
Added a conditional statment in to handle that case.
(From OE-Core rev: 8567991639fda8d2a1e88169b86c72e14cc6c82d)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
list_installed_packages should output uniform formatted archs for all
packaging system(deb, rpm and ipk), for they are used by common code to
grab the package infos. Otherwise, it will lead some -dbg packages to be
missed processing in come cases.
It's introduced by commit: fc985f51, package_rpm.bbclass: fix the arch
(replace "-" with "_").
Fixed by replacing "_" back to "-" in list_installed_packages, make it
output real arch values which can be safely used.
(From OE-Core rev: 554f2436435bf96c6735827f491c1b78b198c016)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There maybe no rpm postinst script (e.g., core-image-minimal), then the
"*" is not expanded, and there would be error:
head: cannot open `rpm-postinsts/*' for reading: No such file or directory
Check whether it exists or not will fix the problem.
[YOCTO #3172]
(From OE-Core rev: 966c72e00c8d378d7d189f0e4b626f6782d23a25)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
RPM does not name it's packages with the Multilib prefix,
but the rootfs_rpm class keeps track of the Multilib prefixs
in a list. Use that list to re-attach the prefix for use with
the license bbclass, buildhistory bbclass will also use this
and make it more accurate between multilib and non-multilib.
Use the embedded "Platform" information to ensure we get all
the correct matching.
(From OE-Core rev: f72abd80b0cc9d27aad2e31ecb548b4ab0fd8f67)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rename rpmresolve's -d option to -t and make -d enable debug output;
add a -o option to specify the output file (so rpm debug output doesn't
go to the output file) and also add a little more detail to some of the
error messages.
(From OE-Core rev: 163dd734d79fd7040b48b10bca6fde28460ac20c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move scripts/rpm-createsolvedb.py to
meta/recipes-support/createrepo/createrepo/ since we should wrap it to
use the native python.
[YOCTO #2822]
(From OE-Core rev: 72d673bef385e756bd858f9eca7fe419efaceb39)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Reduce the number of calls to the packaging tool, especially in the case
of rpm, using helper utilities to gather the required information more
efficiently where possible.
(From OE-Core rev: d0b8a98c5b46c305afd389fc862b3bf0c6f1eaab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use a similar mechanism that was previously used to install locales at
rootfs generation time to install other "complementary" packages (e.g.
*-dev packages) - i.e. install all of the explicitly requested packages
and their dependencies, then get a list of the packages that were
installed, and use that list to install the complementary packages. This
has been implemented by using a list of globs which should make it
easier to extend in future.
The previous locale package installation code assumed that the locale
packages did not have any dependencies that were not already installed;
now that we are installing non-locale packages this is no longer
correct. In practice only the rpm backend actually made use of this
assumption, so it needed to be changed to call into the existing package
backend code to do the complementary package installation rather than
calling rpm directly.
This fixes the doc-pkgs IMAGE_FEATURES feature to work correctly, and
also ensures that all dev/dbg packages get installed for
dev-pkgs/dbg-pkgs respectively even if the dependency chains between
those packages was not ensuring that already.
The code has also been adapted to work correctly with the new
SDK-from-image functionality. To that end, an SDKIMAGE_FEATURES variable
has been added to allow specifying what extra image features should go
into the SDK (extra, because by virtue of installing all of the packages
in the image into the target part of the SDK, we already include all of
IMAGE_FEATURES) with a default value of "dev-pkgs dbg-pkgs".
Fixes [YOCTO #2614].
(From OE-Core rev: 72d1048a8381fa4a8c4c0d082047536727b4be47)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Improve the performance of the RPM backend during do_rootfs by
performing most of the package name to file resolution in a separate
utility written in C, processing the entire list of packages at once
rather than running rpm on the command line which loads the RPM database
for every package.
(From OE-Core rev: 9135d351ba7cb21e50239d2b310565680bd4fdca)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
An anonymous python chunk configures some multilib settings for both
populate_sdk_rpm and rootfs_rpm. The two classes should contain identical
versions to ensure that the generated multilib configuration is the same
for the SDK and the rootfs.
(From OE-Core rev: 0f60722ef460fa826e4f02e7457004e64ca41d76)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move the creation of the database configuration files to just before we
perform the install actions. This ensures they will exist even in SDK or
other non-target filesystem images.
(From OE-Core rev: 113e015afd46e46c9ba0413ca15f0316fa2eec24)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
RPM 5.4.8 requires db 5.3.x, so both are upgraded together.
(From OE-Core rev: c5898ef3fc3820ff9c44bc5b1b16e5def64aa877)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The rpmlib was removed when images that add
"remove_packaging_data_files" to ROOTFS_POSTPROCESS_COMMAND, which would
make the increment rpm image generation doesn't work in the second
build, since list_installed_packages would get incorrect value in the
second build, move the rpmlib to ${T} rather than remove it, and move it
back when INC_RPM_IMAGE_GEN =1.
[YOCTO #2440]
(From OE-Core rev: c30e79510c06701f10f659eedaa0fe785538ac17)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use 'run-postinsts' as trigger script name as it describes better the
intent of it.
(From OE-Core rev: 6bc50e531a15728be019af7bec5bce704fb72f8f)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Incremental rpm image generation, the rootfs would be totally removed and
re-created in the second generation by default, but with
INC_RPM_IMAGE_GEN = "1", the rpm based rootfs would be kept, and will do
update(remove/add some pkgs) on it.
NOTE: This is not suggested when you want to create a productive rootfs
For example:
1) Add the follow config option to a conf file:
INC_RPM_IMAGE_GEN = "1"
2) bitbake core-image-sato
modify a package
bitbake core-image-sato
The rootfs would not be totally removed and re-created in the second
generation, it would be simply updated based on the "package".
Implatation:
1) Figure out the pkg which need to be removed or re-installed, then use
'rpm -e to remove the old one. Use the rpm's BUILDTIME to determine
which pkg has been rebuilt.
2) Figure out the pkg which is newly added, and use 'rpm -U' to install
it.
This only for the rpm based rootfs, the deb and ipk based rootfs would
be done later.
[YOCTO #1651]
(From OE-Core rev: 575ba3c9e153a1d8ac228a99a03ca2df5fbca151)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Tune the __db* size in DB_CONFIG.
This will reduce the __db* size from 62MB to 26MB in qemu.
[YOCTO #1769]
(From OE-Core rev: 32d308bb38612cef2a98a4c40f058b4db50787aa)
Signed-off-by: Mei Lei <lei.mei@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Let each package-specific rootfs implementation provide basic functions
to query the existence of a package and install a list of packages and
then have a generic install function so this logic is in one place.
Note: unlike previous versions of this code in OE-Core this uses the
IMAGE_LINGUAS variable and not IMAGE_LOCALES - note that IMAGE_LINGUAS
was what was used in OE-Classic and it is already used in OE-Core in
order to install locale-base-*. This will mean that if IMAGE_LINGUAS is
left at the default you will now get more packages installed. If you
don't want these language support packages then you should set
IMAGE_LINGUAS explicitly.
This restores locale installation to the same state as OE-Classic, only
we now support all the packaging backends.
(From OE-Core rev: c0fc36f8629a6abb9a7b542df8a2857526547a31)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Implement list_package_recommends() for rpm, and filter out the
"suggests" (RPM's equivalent of recommends) in list_package_depends().
Respectively, these changes fix buildhistory handling of recommends for
RPM (so that they are included in the image graphs) and also prevents
failures during do_rootfs with buildhistory enabled if a recommend is
unsatisfied.
(From OE-Core rev: b6787f5d6e181d8c39cce7b050e261d1a1d1b075)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Create a new build output history reporting class, using testlab.bbclass
from meta-oe as a base. This records information from images produced by
the build process in text files structured suitably for tracking within
a git repository, thus enabling monitoring of changes over time.
Build history collection can be enabled simply by adding the following
to your local.conf:
INHERIT += "buildhistory"
The output after a build can then be found in BUILDHISTORY_DIR (defaults to
TMPDIR/buildhistory). If you set up this directory as a git repository and
set BUILDHISTORY_COMMIT to "1" in local.conf, the build history data will
be committed on every build.
(From OE-Core rev: 14acb530a27a3b088d0bfd56db291f4e72ace8ab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit 508ff624fea705eb93cf2cc1e0c9c42cb817acf8. RP
accidentally pulled the wrong commit in, it was supposed to be a
*package*history bbclass change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Create a new build output history reporting class, using testlab.bbclass
from meta-oe and packagehistory.bbclass as a base. This records information
from packages and images output from the build process in text files
structured suitably for tracking within a git repository, thus enabling
monitoring of changes over time.
Build history collection can be enabled simply by adding the following
to your local.conf:
INHERIT += "buildhistory"
The output after a build can then be found in BUILDHISTORY_DIR (defaults to
TMPDIR/buildhistory). If you set up this directory as a git repository and
set BUILDHISTORY_COMMIT to "1" in local.conf, the build history data will
be committed on every build.
(From OE-Core rev: 508ff624fea705eb93cf2cc1e0c9c42cb817acf8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disable script debugging, as the log files become huge and take a
long time to process during the log check step. This results in a
performance improvement.
(From OE-Core rev: a7e70227bac72c4f7d3419f94f6915da4c7e3f43)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #1755]
We change the want the RPM rootfs install works to install pre and post install
scripts. The new method uses a script helper that is invoked by RPM outside
of the normal chroot.
The wrapper is dynamically generated prior to the install starting. It will
check the return code of the script. If the script fails, it will store a copy
to be executed on the first system boot. This is similar to the previous
mechanism.
In addition, a line of debug was added to the scripts as written by package_rpm
to list which package and which script for later debugging, if necessary.
(From OE-Core rev: 3e7120d6a9fd5e46214673d0a6e1085a7314ff42)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is the result of running the following over the metadata:
sed \
-e 's:bb.data.\(setVar([^,()]*,[^,()]*\), *\([^ )]*\) *):\2.\1):g' \
-e 's:bb.data.\(setVarFlag([^,()]*,[^,()]*,[^,()]*\), *\([^) ]*\) *):\2.\1):g' \
-e 's:bb.data.\(getVar([^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \
-e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \
-e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^() ]*\) *):\2.\1):g' \
-e 's:bb.data.\(getVar([^,()]*\), *\([^) ]*\) *):\2.\1):g' \
-i `grep -ril bb.data *`
(From OE-Core rev: b22831fd63164c4db9c0b72934d7d734a6585251)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There should just be a single IMAGE_INSTALL variable. If the package
backends need this split into different multilib components they should
be responsible for doing this, not the user.
This commit removes the MULTILIB_IMAGE_INSTALL variable.
[YOCTO #1564]
(From OE-Core rev: 7736862a74c92fe1afe42e170822be13117575c2)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add MLPREFIX to multilib deploy forlder to avoid the confliction between
multilib and normal package deploy directory.
(From OE-Core rev: 18b8d1f7769b63725c3b6883298a841806cd06ab)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If user set MULTILIB_IMAGE_INSTALL, we need to install those multitlib
packages into the final image.
Also fix the logic in handling multilib prefix. For certain case like a
normal image contains several multilib libraries, the image recipe isn't
extended with MLPREFIX, therefore we need to enumerate the possible
multilib prefixes and compare them with package prefixes.
(From OE-Core rev: a94cc552dc764d3cc83ea638cb08b9a2a8829d2f)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently MACHINE_ARCH deploy folder is unique in multilib system, thus
a lib32 version of rpm package will override a normal rpm package if
its PACKAGE_ARCH is ${MACHINE_ARCH}.
Define different deploy folder for multilib architectures to avoid the
confliction.
(From OE-Core rev: 921f984aa65e23d5a8ec5c2e58a96cb8a4790b5d)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To get the MULTILIB_PACKAGE_ARCHS, we need to get the corresponding
DEFAULTTUNE value. This fixes the multilib arch directory missing issue
in solvedb-ml_archs.conf.
(From OE-Core rev: 54306ff373e13696637b547fa1514e0ef8633248)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
"virtclass-multilib" is set to OVERRIDES in multilib.bbclass, remove the
duplicated settings here.
Besides, DEFAULTTUNE has overrided and it can be directly used.
[YOCTO #1368]
CC: Mark Hatle <mark.hatle@windriver.com>
(From OE-Core rev: dc78cdb318671862c5cd15711364c1c4462d9ece)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order for things to be easier to maintain in the future, sync up
the sdk and rootfs versions.
(From OE-Core rev: 3c78da15457d8d20c9964cd845f6e021d442aaae)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
in packages_rpm.bbclass:
Cleanup the way package_update_index_rpm works. Break this out into two
functions, one for common functionality and one for controlling target vs
sdk package processing.
Similar change to package_generate_rpm_conf.
Usage of IMAGE_ROOTFS should actually be "target_rootfs", this fixes a problem
with the SDK case.
in rootfs_rpm.bbclass:
Minor re-order of the values, and avoid multiple uses of IMAGE_ROOTFS in order
to make the merge with the SDK behavior easier.
(From OE-Core rev: 46559f36d8a39655060b45d3d235de44a2c4c09b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Earlier iterations of the multilib patch used "TUNENAME", which was later
renamed to DEFAULTTUNE. This file was missed in the rename.
(From OE-Core rev: fdd39925df8268ad41c1ff643a0761b03fad8e08)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 59c26a280f909470e19a2be04b8ea9dd3aa5c24b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a first pass at adding multilib support to the RPM package
and image handling code.
(From OE-Core rev: 1939a4395997098862912e013a2b13ed2f385f9f)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #1171]
This is a temporary fix to address the fact that zypper's db configuation
uses a large amount of /var space. When the correct'ed zypper config can
be applied, this fix can be removed. The zypper bug for yocto is 1174
http://bugzilla.pokylinux.org/show_bug.cgi?id=1174
(From OE-Core rev: 05995abe8d74ed8a460f6c29b686f812f62b3d92)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When a package is built, some installation scripts must be
performed on the target. In the case of a complete image,
these scripts are run by a separate step at init time, but
only during the first boot (other package install scripts
can just be run when the package is installed on the target).
This patch lets the distribution (or user) decide when these
postponed install scripts should run. The default is normally
near the end of init, but there may be times when it's beneficial
to run them earlier so the "when" can be overridden.
(From OE-Core rev: a46466893407d44dd16ab37ae70e1bee14bdde0a)
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 607a7657715f6fcba467a4e55ba64f41f4e13a15)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The additional configuration should have been there from the beginning. The
purpose of these config files is to have a consistent Berkeley DB configuration
even if the underlying RPM version changes -- or the RPM macros change.
This likely would not cause any problems until we attempted an upgrade of
either BDB or RPM.
(From OE-Core rev: a0682191e0743ed8ec1d30567eb26d4cde864ee8)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[BUG #756]
Fix bug #756. The rootfs contains a control file /etc/rpm/platform
that specifies the default system platform, as well as patterns for
compatible architectures. This file was not being setup properly due
to a misunderstanding of the format in a previous patch.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
Saul Wold
Chen Qi
Paul Eggleton
Mark Hatle
Martin Jansa
Ming Liu
Robert Yang
Otavio Salvador
Mei Lei
Richard Purdie
Dongxiao Xu
Gary Thomas