| Age | Commit message (Collapse) | Author |
|---|
|
The re-structuring of the web server that holds the documents created
some bad links. I thought I had gotten them all but apparently not.
this is a drawback of not being able to test things until after stuff
is done. In any case, I grepped through everything and this takes
care of it.
(From yocto-docs rev: cdbc3b3b7f6d6ff01024b977f966459cf414ad5c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I somehow had either dreamed the word "einstein" into the release
for 1.1 and had it in there as part of the tarball name, etc.
I have replaced this obviously with "edison."
Other edits involved making the references to outside documents
more consistent.
(From yocto-docs rev: 2407b7dd89712c489d515e97d44e3c7dc0b64d20)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I updated the section on the supported distribution section by including
a link to the wiki page that shows what distros we have tested and
their status.
(From yocto-docs rev: e66a18a13dc02af6a0846dd1ecf14aeafcbe5d61)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Several manuals and areas were still referring to 'glibc' as the
GNU version of the Unix statndrd C library. We do not support this
any longer and now use 'eglibc' to build with. Notable changes were
in the required packages area of the QS manual. I also added a
bit in the reference guide saying how this release does not use
'glibc' to build with but rather 'eglibc'.
(From yocto-docs rev: c2c58914996d747c510706d78ecfd8f41c5e694d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I needed to reference the image differently for the pre-built section.
(From yocto-docs rev: 10568a0a8c4160af995089e481ccc2772e81d805)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was a final scrub of the manual. I updated all examples and links
to be current for what I think will be the 1.1 release. I also added
some cross-referencing into the YP dev manual that now exist.
(From yocto-docs rev: 4c10b0e04856817a1d03aee7a9ed6e4d5d73a3ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This bug was filed by Gary Thomas and was requesting more information
on the "hows" and "whys" of setting up your own package repositories.
At this point, I have added information to help the user understand
build performance issues when choosing between the RPM and IPKG packaging
systems. Likely, there is more that needs to be added to fully address
this bug.
For now, I added explanations in the packaging class and glossary areas
of the YP reference manual, a new paragraph in the YP QS just prior to
firing off a build, and a new bit of information in the configuring
PMS in the ADT Manual.
(From yocto-docs rev: d0025f862cb85ca741787b4737dca286e3ebfb45)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added 'xterm' as a required package to both Debian-based and RPM-based
hosts.
(From yocto-docs rev: 0a933001bd8c546a5d4960842c5e897061d09369)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I changed the references to the Poky Reference Manual to the Yocto Project
Reference Manual. I also changed 'poky-qemu' command to 'runqemu'.
(From yocto-docs rev: f46003eab91d1f682113b9e0672efd486a509ec6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the PDF version of the manual the "‐‐" statement does not
display correctly. I changed this to "--".
(From yocto-docs rev: ae3a5bc15d30668b6f9048245f70dcd82f89da32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are examples that use "1.0". i have changed these to "1.1"
in anticipation of the 1.1 release. At the time of the change I don't
know if the actual file names i put in are correct. I need to check them
when Beth sends me the real stuff.
(From yocto-docs rev: 3d5bd0bd38fd2d99e7d5cbb6bedf0fde0fdd5fa9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
to manual.
(From yocto-docs rev: 8008a00e188dc0569d0fb6e5cf497637a0b57747)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
tightened up the section that talks about setting up the environment
and starting qemu. I just added a little more clarification on the
kernel-image variable.
(From yocto-docs rev: 54c037d45ca46c09544dae67793237c76a1205f5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updated the downloading the filesystem section to have an inclusive list
of image profiles and a reference to more information on that. Also
included more explanation of the two types of image tarballs.
(From yocto-docs rev: 14965cbedd719beb6191771c6dcb92742f4229bf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I made some edits to the section that shows how to download a pre-built
qemu image.
(From yocto-docs rev: 89127522b09cc201008dc760f8b1397b5ff36e42)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I changed the 'i686' stuff to 'i586' after seeing that it is named that
in the actual index of downloads area. I also tightened up the example
a bit.
(From yocto-docs rev: ab76e8f8aa3d8d24d1fd8ff3b7f8f175b8b8f663)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 696aa5b822cd0e52a9c67c0b3ea73f35f6e99983)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Day fixes
Three issues pointed out by Robert P. J. Day.
1) Missing text for "This optional GNOME mobile-based UI, which is intended for
devices with resolution but restricted size screens ..." I re-wrote this
so it makes sense.
2) Scrubbed document for incorrect usage of openSUSE. There were three
occurences.
3) Made several changes to the example of using a pre-built image. The
arguments to the poky-qemu command did not exist (they were old). I
used existing arguments now and I also bolstered up the root filesystem
explanation a bit.
(From yocto-docs rev: 31b7a97dfd11ff50ee6c554bf8647591021fef72)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Syntax did not have line-continuation characters in the zypper
example. Error found by Robert P. J. Day.
(From yocto-docs rev: 4ecbd3d1706336ddc691bf4ce6763a179f3f70a6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Toolchain filenames corrected. Discovered by Robert P. J. Day.
(From yocto-docs rev: 3afa1d71be04c6aedafe952855a23ccbd3547b68)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Was suggested that toolchains "should" be installed under /opt/poky.
This is in fact a requirement. I replaced "should" with "must."
(From yocto-docs rev: fe890b056831a84cde47f9200300491426f20c65)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
fixed. (From yocto-docs rev: a73aa8d24023fb41a061b8d1a7a1a93c6b04b5b9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The example bitbake command now has the target core-image-sato.
This reflects post-bernard.
(From yocto-docs rev: 3ff1ee07947f301c4df2a9aea8d1aab15c5237eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Turns out that the package libtool is necessary for working with ADT during
the installation process. I need to mention this in the ADT manual but
it would be helpful if it was one of the packages in the QS along with
all the others. I added libtool to the package requirements lists
for the three supported hosts.
(From yocto-docs rev: 5f95fa1af0cfe9a97e437b8239e139479a1d5317)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Partial commit for supported distribution change.
(From yocto-docs rev: 4a84894dc2964f0153294b87f6205c432a482ac2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I included a new note to help users of pre-15 release Fedora enable sudo.
Along with this I repositioned the note about using non-supported
distros into the main text. Overall the section includes more information
and is organized a bit better.
(From yocto-docs rev: b0ae94b97ae46562ddde79df83462adf88b94527)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I updated the packages section to also include the zypper command
and supporting commands so that the OpenSUSE user can install
packages.
(From yocto-docs rev: 3a9a0f7fb03bf264e1587d181db111a542e7964d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added text suggesting that BB_NUMBER_THREADS be set to twice the number
of available processor cores and that PARALLEL_MAKE be set equal to the
number of processor cores. Similar changes were made to local.conf
based on work by Josh.
(From yocto-docs rev: e342a4af4d3ba000b348bbb9d125977fc0e95273)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the note that tells users YP must have Python 2.6 I added Python
2.7.
(From yocto-docs rev: 611ad6331a8b3e1acc98f2029a181a92f32220e0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed several instances to the 5.0 Bernard release. I replaced
these with the 5.0.1 release. I also re-wrote a paragraph that
instructs the user on where to find and download the most recent
YP tarball. It used to point to the Index of /Downloads into the
"yocto-1.0" folder. I now instruct the user to go to the
Yocto Project website and download the desired release from there.
(From yocto-docs rev: 30b5163730139b2b852d64c87a7e710b7fcc7dad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
poky-qemu
Evidently the command 'runqemu' is not a valid command for Bernard.
I changed four occurances of 'runqemu' to 'poky-qemu'.
(From yocto-docs rev: 0296920cc07a6fb9871c5af4bb991fcee2949564)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the example for building an image the command
'source poky-bernard-5.0/oe-init-build-env poky-5.0-build' was used.
Torsten Scheck notified Jeff Osier-mixon and sent the fix to
change to 'source poky-bernard-5.0/poky-init-build-env poky-5.0-build'
I made the change.
(From yocto-docs rev: b96646efb203e482d53d922fb120672df5a09966)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
option
BUGID#_1083 - I added the -k option as part of the bitbake command in the
example that builds an image. I did not explain it as that is beyond
the scope of the quickstart. I did however point the user to where
they can find information on it.
(From yocto-docs rev: 620351d38c67ff14cefc7a52bbc0e98789011677)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The command used in the example to build an image was using
'bitbake core-image-sato', which is only available in master and
not Bernard. So, I changed the command to be 'bitbake poky-image-sato'
at Dave Stewart's request. He located and pointed out the error.
(From yocto-docs rev: 3fa83550aaec5a3549825814a77fa7a823a2daea)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There was an occurance of 'the the' in the manual. I removed it.
(From yocto-docs rev: fae94d71d74434abd8d306a045cdb95efe1dd9b3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 0feb6b8f9621087ba5fd77d3c8f3e23132c97187)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: b654d6a741edf70220e81f6b56276413a308ba6f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 15bedcbd988300c2fdf880c5f15def50310049e2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
note regarding older host systems
I made a few small edits and I added a reference to the
wiki page 'https://wiki.yoctoproject.org/wiki/BuildingOnRHEL4'
that has entries for older development hosts. Right now all that
is there is the RHEL4 notes but the wiki page can be expanded as needed.
(From OE-Core rev: a23acbd48ee911d9882a78491280977fb62ea156)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed "YP" from another spot in the manual.
(From OE-Core rev: 22f701b97a8d1412638f5ae79343a37791dde9e6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I removed this YP acroynm since we never use it.
(From OE-Core rev: b37cab45b4f0dbba0dedbbbe240e91db30df4b8c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fedora 14 bitbake native note
[BUGID# 931] - I have removed the Note indicating that the user must run
'bitbake make-native' if running Fedora 14.
This is no longer a requirement for YP Release 1.0
(From OE-Core rev: 33a529f94c494531dbbfca5050898eb4c42f64df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
courtesy Colin Walters
In the Quick Start there is a note indicating that you should run
'bitbake make-native' followed by 'bitbake poky-image-sato' if you
are running Fedora 14 or another distribution that ships with GNU.
Colin Walters submitted a patch that offerred an URL for further
explanation on a Make Bug. The URL is
http://www.mail-archive.com/bug-make@gnu.org/msg06220.html. Rather
than submit Colin's patch verbatim I updated the note to include the
reference with a little different wording.
This extra information submitted by Colin will be very helpful.
(From OE-Core rev: d32ccd0ce620942447c7b49c6117c2ea7eff46ff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I added a note to reference the FAQ entry in the Poky manual that describes
how to get around proxy and firewall stuff hanging up getting the source
code during a build.
(From OE-Core rev: f9abba290157c122f36aed5e52f1a0f792e3add2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the beginning of the manual I added references to the FAQs we
support.
(From OE-Core rev: 615a015189f3b09ea928f288516be1f90447cbf2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
examples
This is first guess at the correct example commands and directory
names for the Bernard 5.0 release. I don't have any real directories
available to look at and doc changes are supposed to be frozen before the
actual build. So these are guesses and will need reviewed.
(From OE-Core rev: c052537216395019bc436291e1c2ec43c3abc3ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[BUGID# 857] In the packages section for the list of Debian-based system package
requirements I added 'groff'.
(From OE-Core rev: b67204a99fe34a165f97dd6bb5191735a4632678)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added "Copyright 2010-2011 Linux Foundation" under the title. For
now this will have to do. Once we get the converted website up I
would like to see all manuals displayed as HTML files within the
context of the site layout. At that point we can have a copyright
and trademark stuff in a persistent footer.
[BUGID #696]
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
note about Python 2.6 bitbake requirement
Part of the fix for Bug 628 is to add a note that bitbake requires
python 2.6. I added this note before the example bitbake command
that builds an image. I also added a linked reference to the Poky
Reference Manual and mentioned the FAQ appendix. There will be more
information about the python requirement in the FAQ.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
tip for saving disk space during a build.
[BUGID# 631] - I added a tip in the section where we show a sample build.
The tip says that you can add 'INHERIT += "rm_work"' to the local.conf file
to help conserve disk space during a build.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
Scott Rifenbark
Richard Purdie