| Age | Commit message (Collapse) | Author |
|---|
|
1. Added "Debian" as a distribution for best results.
2. Fixed a link to the Hob page and two links for the
Build Appliance.
3. Three typos fixed and a few grammar items fixed.
(From yocto-docs rev: 0b381094ed9cc2d66895d4ad7c63005c8a918eb1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: d117584a589460412a7fc4df15512b0d9c9448c7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Made minor changes as needed due to some new sections, links,
and capitalization standards.
(From yocto-docs rev: bc966e5a78dadd14ecf1896a36e40a9b256bae77)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Minor edits to the part of the example that sets up for the
first core-image-minimal build. Put in the variable to use
for the build environment setup script, updated some changed
output from some of the commands, etc.
(From yocto-docs rev: 0b4b2ddf9a78a9d6d218ed9a6f0acd3e876d9581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added a line to cd to the poky directory so the example makes
sure the meta-intel directory is created in poky as it states.
(From yocto-docs rev: fdeff0fc2c61c521eaf9d3c48429792f1559c2a4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: ff04bcaaae1a4f9a6e7b97c502fce9cde579c624)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updated so that the repo poky-extras is for sure created inside
the poky repository.
(From yocto-docs rev: b01ea76ded2ade66f2cb19b37d9e9d8d5d2e96c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 6305dc7b4cbeae7f5725a2c2bc003b361460cfdf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: a929747d076d0ce5d7401c95eaebc4800ed7cd4b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 1e9ed539913e0c23bb9d6b36e992a3a6e7a91963)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For 1.3 there is not longer a toolchain tarball. Instead, there
is a wrapper script that lets you install the tarball. This
fundamental usage model change caused several ripples throughout
the documentation set. I have changed wordings and examples
to reflect the new paradigm.
(From yocto-docs rev: afb2069daa91e04c0f78ba425a6b184cb820d888)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Robert P. J. Day pointed out a link in the development manual that
was for the BitBake User Manual. The link resolved to an old,
non-maintained version of BitBake documentation. According to
Richard Purdie, the BitBake docs referenced should be the ones
that ship in the bitbake/doc/manual directory of poky. The
YP docs had been using a variable named BITBAKE_DOCS_URL that
also resolved to the antiquated user manual site. Consequently,
there were many links that needed fixed across both the YP
Development Manual and the YP Reference Manual. Each of these
references now points in general to the bitbake/doc/manual
directory in poky for more information.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 12f77236b602e9ec43e845c8cec060ad342af19c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I fixed several occurences of cross-references to whole manuals where
the formatting was split in the <ulink> statement. The <ulink> tag
and the manual title must be on one DocBook line in order for the
sed scripts to correctly process the links when the mega-manual is
created.
(From yocto-docs rev: 0dee12d518c892f59c0446e1c7b5d0f71b6ee22b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The way I refered to the YP Quick Start was inconsistant.
I have made edits to remove these.
(From yocto-docs rev: d9487c60db23861e8a9dd2c81ac46d4960abd462)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changed the first sentence of the description of how to use QEMU images
with NFS server. This is feedback from Scott Garman's review.
(From yocto-docs rev: 6a33b1b58bd72756baf57228b7348ff662248012)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Two areas of the manual updated to reflect the fact that not all
QEMU images have an SSH server in them.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: a173d8cb05ee695b02188a037ee047db016c6a67)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The name of the ADT manual has changed to the "Yocto Project
Application Developer's Guide." This change had some ripple effect
regarding cross-references into the manual. These are now fixed.
(From yocto-docs rev: 7ba25c470b03a85098388e6cca7c78a6ebb245d8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-imagese" and "ref-features" appendices
to chapters and made any references in the doc set use the proper
term now (chapter).
(From yocto-docs rev: 08117634034a5cd5567c971957583d986c9ee9a4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ddee80872afc567b9381387980f257b337f29ea1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Throughout the manual, the kernels that are built and available through
the Yocto Project were being referenced as a "Linux Yocto kernel."
This reference is poor. First, it placed Linux and Yocto very close
together and could upset the Linux folks. Second, a better way would
have been to say "Yocto Linux kernel." I have fixed by referring to
kernels that are available through the Yocto Project as
"Yocto Project kernels."
(From yocto-docs rev: 9b8319328cd4ab4ce3363001c9feeec585d9cab9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I have replaced the term "Yocto Project" with more appropriate terms
where possible.
(From yocto-docs rev: 622ef9a2b4897ecd151b641b43d7706ab673c989)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some minor typoes in first couple chapters
(From yocto-docs rev: 36618cc6a261a994b00c5c524c76cbf3952a2eae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The "Using Pre-Built Binaries and QUME" section needed to incorporate
some information from the YP Reference Manual. I have merged those
changes in and did some re-writing to blend it well.
(From yocto-docs rev: 5c20f00f9ec75c19fd0106c9f241751381ba7e3c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updated various shell output examples created from cloning various
Git repositories, etc.
(From yocto-docs rev: 76024b2648c383bf19e6fee81d54c6a992e8d593)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updated the shell output example when user creates a bare clone
of kernel. We use linux-yocto-3.2 here.
(From yocto-docs rev: 69e3aa7a42d03cff23379432f5d1b496157d5c0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Better wording for the role of BitBake. Updated shell output for
the clone of poky.
(From yocto-docs rev: eab184de2bd2b22def9dbe0c93b153ec9334402b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I did a quick and dirty scrub over the manuals for the strings
"1.1" and "edison". I found some instances that were not properly
variablized. Also, discovered some references to the
linux-yocto-3.0-1.1.x. All but one instance of this needed changed
to linux-yocto-3.2.
(From yocto-docs rev: 620fb4b7626defcefc8a039de09ae4599ee7f454)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Provided a clearer full name for .bbappend files.
(From yocto-docs rev: 4ee07af442c26aa06a6b295df758f41838b407df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I converted the hard links to use the variables as established
in the file poky.ent.
Also, Cleaned up some bad text in the term "Yocto Project Files."
Looks like a cut-and-paste problem.
(From yocto-docs rev: e2e20bf4895d80dae73595e93132f37fb31121d1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The section describing how to set up meta-intel has been re-written
to provide more information about this Git repository and why
it is important. Also, added information explaining why user
should use the same set up method (tarball or Git repo) as used
to set up the YP files tree.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 53fbfc59f0183a6b8474ed643302faffef79356b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added a bit more information to the wording where it talks about
creating a Git Repository if you are going to contribute back
into YP. This change was suggested by Robert P. J. Day and
was submitted to me in the form of a patch. For reasons unknown
to me the patch Hunk failed even though I believe I had things
saved and applied correctly. I had to resort to applying it by
hand. I ended up doing a bit of re-writing on the suggested
change to clean it up.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 94f90c91e6b1d13bebc7a434210452f222ef0317)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Throughout the manual there is a specific term to refer to the
YP build directory: "Yocto Project Build Directory." This term
was being loosely referred to and was not consisten in linking to
the actual term definition in the Terms chapter. All this is
fixed.
(From yocto-docs rev: 9229a512a62780a0e52089cc865d0903cbe7c92e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
yocto-docs rev: 767ec4659e72622a08ff6d1923d14c46e6dd4331)
Signed-off-by: Scott Rifenbark
<scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I added some text to explain where the meta-intel repo can be
found within the YP source repositories. Also provided a link
back to the start of the BSP Guide.
(From yocto-docs rev: 79d513d010637e4a684da64b363ed8d957f06640)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added text so the user could locate the poky-extras Git Repository
within the YP Source Repositories.
(From yocto-docs rev: 3778a768ae30e323be0e84b55778040ebe89a3ad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added a reference into the YP Source Repositories so the user knows
where our supported Linux Yocto Kernels are. Also, corrected a
mistake in the working about copying the bare clone.
(From yocto-docs rev: 76f3d59dd9e0b30644415f33158d71ec6932fb4f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added some clarity on where the poky Git repository comes from
with regard to the YP source repositories.
(From yocto-docs rev: 29c0b095daa39256b69cd35f744136d97a239cc3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I changed the example to use a different kernel (linux-yocto-3.0-1.1.x)
and the example that creates the bare clone and the copy of the
bare clone to use better names that are more easily distiguishable:
linux-yocto-3.0-1.1.x.git and my-linux-3.0-1.1.x-work, respectively.
(From yocto-docs rev: b1366d35155121f5aa576715541036304c99f13b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These edits help explain the differences between local YP files
created through a tarball extraction vs cloning a Git repository.
(From yocto-docs rev: ed368800c3e9ece71d27d6d690f0ddc264a4c2da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The information surrounding the central download directory was
pretty scant. Jim Abernathy pointed this out in an email sent to
me. As a start, I have added quite a bit more information to
the glossary description for DL_DIR. Part of that added information
is a pointer to the FAQ entry that describes exactly how the
build system gets source files. Then, in the YP Development Manual
in the section that introduces the build process, I added several
references to various variables that are set in the local.conf
file prior to kicking off the build.
Reported-by: Jim Abernathy <jim.abernathy@intel.com>
(From yocto-docs rev: 4d7835a3bff5bd054301fa9ab6954c11c88dad58)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updated the console output created when you create the bare clone
and the copy of the bare clone.
(From yocto-docs rev: cc6290e416fb113f687645517bccf3f6f177395e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I updated the console output returned when you set up the
poky-extras repo.
(From yocto-docs rev: f0fe9a6e04f72c727562719244719ce1058256e4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Tom Zanussi provided a review up through part of the "model"
chapter. I have implemented his comments mosty verbatim.
Reported-by: Tom Zanussi
(From yocto-docs rev: 693d4fadd4b34ffef9953fb1850d381ff7c028a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are many references to YP documentation throughout the
YP manual set. They used to have hard-coded links to the
current release (e.g. yoctoproject.org/docs/1.1 for Edison).
This created a situation where if you went to a document on
the website and clicked on a external reference to another
manual, you would redirect to the current manual on the website.
Really, you would want to go to the latest manual, which is
one that is under development. Changing the links to
"yoctoproject.org/docs/latest" makes the tip of master, which
is used for devloping the next release, always have references
to the manuals being developed and not back to the stable
released set of manuals.
This "latest" and "current" scheme for the links is not perfect.
What has to happen when the latest set of the manuals freezes
and becomes the next stable release, all the links in the docs
will need to be changed from "latest" in the URL to the new
release number. So for example, all the "latest" occurences
would need to be changed to "1.2". Then for the next cycle
as development begins again, the links need to be infused with
"latest" again.
(From yocto-docs rev: a234aef34303b07671da956de0e94b352797143e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Robert found five instances where I missed the correct usage of
"BitBake."
(From yocto-docs rev: 0819076e8677accd157497ed4fa33ebab2528044)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Several notes were not producing a line-break betweent he end
of the note and the start of the next paragraph. Most work, but
for some reason these did not. It is a mystery to me.
(From yocto-docs rev: 2c87e0cb781b6d94297dc558504f869bd54a6ad0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Robert isolated a few technical errors and made some other wording
suggestions. I took the technical corrections and modified one
of his suggested wording changes.
(From yocto-docs rev: 3c6bbae05cdf2265e04d967050354ce75d62b4e2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The restructuring of the web site where we store manuals broke some
links that were cut-and-pasted in from older work. These slipped by
me so not changing them would direct the user to a 1.0 version of
the externally referenced manual rather than the 1.1 version.
I also got rid of a visible "WRITER'S NOTE" in the document that
was left behind.
(From yocto-docs rev: 1508826312a2fe35e5d693821a4c7737baafcb2e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I re-ran the exmaples to set up various Git repos and updated the output.
Also fixed a bad tarball name from edison-1.1 to edison-6.0
(From yocto-docs rev: 6538d588fa35986ff301a22d327af73c337ec43c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I changed the bernard examples used when creating Git repos to reflect
the edison release.
(From yocto-docs rev: d345cb08905e7f5e21b1649af5e876317cc68931)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Robert P. J. Day
Scott Rifenbark