| Age | Commit message (Collapse) | Author |
|---|
|
Changes throughout the manual that either eliminate or change
many of the "Yocto Project" strings. The file structure for
the meta data is now called "source directory." The build
directory is referred as just that - "build directory." Any
where the build system is referred to it is called the
"OpenEmbedded build system."
(From yocto-docs rev: 1210c19f90d4a52042fec12657212ae3e58e13d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added a note to warn the user about mixing ADT Intaller installation
methods.
(From yocto-docs rev: 718a48a7ea4753eb1e59e17a75c3d94a9ed166bb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The section that describes how to generate the cross-toolchain into the
Yocto build tree erroneously referred to this process as installing the
toolchain. Furthermore, it actually mentioned the creation of a
toolchain tarball, which is wrong. I updated the section to more properly
refer to this procedure as generating the toolchain. I also removed the
bit about the tarball creation.
(From yocto-docs rev: 5ae8faa651ed6bf22c5475a4eacb5c758c62cea1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: e698503896615cf08366b004a66b4562f304e3b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is important that the environment uses a host gcc when running the
adt installer. I put some text in noting that.
(From yocto-docs rev: 7f63662913d6d79843e1bdcadc49bb120bb72688)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Addressed all issues specified by [YOCTO #2025] except for the
very first one that says bring the versions up to 1.2. This will
be accomplished by the poky.ent bump at release time.
Fixes [YOCTO #2025]
(From yocto-docs rev: 926e5635d8cd74fff7e00002108ce8c039252203)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Conversion of hard links to use the variables set up in the file
documentation/poky.ent.
(From yocto-docs rev: edbacc1b57f02c31ff6eaee666245be83fb17543)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I added text to show how to unpack the generated ADT Installer
tarball.
(From yocto-docs rev: 32e7413623a5b43484d402989f892527e4a0fc48)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: f1b55e805c9785ef79b53e891acfd96e98ff99a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The URL for the edision tarball was old and had been locked down in
the manual too early. It changed and now this fixes it.
(From yocto-docs rev: c1668e41babd7ef592dc26271943c99bacc3f181)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I replaced the link with the URL that uses 'downloads.yoctoproject.org....'
(From yocto-docs rev: fef7ca4f2a549fabc1932a40a46cf0c6c834074f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
the name was off. It was 'yocto-eglibc-x86_64-i586-toolchain-1.1.tar.bz2'.
Really, the name is
'poky-eglibc-x86_64-i586-toolchain-gmae-1.1.tar.bz2'.
(From yocto-docs rev: 3d051f3e814f27f661ce153b66735f75a4152d04)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I updated the link to be 'download.yoctoproject.org/releases/yocto/yocto-1.1'
I also fixed the text that indicated 'i586' as a directory for the
32-bit machines. The real directory name is 'i686'.
(From yocto-docs rev: fc08acdce64bac7c2b3d4689e16cf06e70f6cbe5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are many references to YP documentation throughout the
YP manual set. They used to have hard-coded links to the
current release (e.g. yoctoproject.org/docs/1.1 for Edison).
This created a situation where if you went to a document on
the website and clicked on a external reference to another
manual, you would redirect to the current manual on the website.
Really, you would want to go to the latest manual, which is
one that is under development. Changing the links to
"yoctoproject.org/docs/latest" makes the tip of master, which
is used for devloping the next release, always have references
to the manuals being developed and not back to the stable
released set of manuals.
This "latest" and "current" scheme for the links is not perfect.
What has to happen when the latest set of the manuals freezes
and becomes the next stable release, all the links in the docs
will need to be changed from "latest" in the URL to the new
release number. So for example, all the "latest" occurences
would need to be changed to "1.2". Then for the next cycle
as development begins again, the links need to be infused with
"latest" again.
(From yocto-docs rev: a234aef34303b07671da956de0e94b352797143e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Michael Tomer from Koko Fitclub reported that the link to the
ADT Installer tarball was broken. Fixed the link.
As Reported by: Michael Tomer <michael.tomer@kokofitclub.com>
(From yocto-docs rev: 891fc3123f73a7b856207e0cdef32821f0cd90a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After greping through the documentation directory, I addressed
all the <ulink> statements that used to have yocto-1.0 in the URL.
They are now yocto-1.1.
(From yocto-docs rev: 97d160263c5905fdeaf4ec285bc5359918790581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I made several changes based on feedback from Jessica Zhang.
1. Removed "SDKVERSION" as a way of identifying the directory in
which a toolchain tarball is installed. I replaced with "1.1"
2. Cleaned up the bitbake command verbage to consistently use
'bitbake' command.
3. Cleaned up an erroneous reference to the toolchain environment
setup scripts. I was referring the user to the oe-init-build-env
area.
4. Changed wording to indicate that the toolchain tarball is generated
after running bitbake rather than installing the toolchain.
5. Replaced the gmae tarball file used in an example to be the
regular taball.
(From yocto-docs rev: f7c3e4f4a666121a29825099d451eab1accb0616)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Made a few corrections to the section describing how to build
the tcf-agent into non-sdk images.
(From yocto-docs rev: e78dc3b3d3dd443506e78651cf9673358577c21d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The YP only ships one pre-built image that has the tcf-agent built
into it - core-image-sato-sdk. There are a couple methods that exist
to create images that do not normally have this agent so that they
will have it. I updated the "Getting the Images" section to
contain those steps. Lianhao and Jessica Zhang were the technical
resources for these changes. These changes are the first draft.
(From yocto-docs rev: 85432e4892c3fe924bf90961f89e8edfd9693e84)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updated a link that was an autobuilder link to be
http://www.yoctoproject.org/downloads/yocto-1.1/machines.
(From yocto-docs rev: 91a4056a285b53f8c73494e8af88d9a98d6d61e0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 90f6bd0aff8346df24d691e0c9424a0a99af2095)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These changes reflect corrections resulting from Jessica Zhang's review
of the sections.
(From yocto-docs rev: c3fed39bc3909c38424e7e72c40471dcb0053c8d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 536665ac8b28426f2869ceffca3ea2f6f4d1eef4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After working through this stuff I was still confused as to how to
guide the user toward proper toolchain installation and on what they
needed to do for collecting their kernel and filesystem images.
These changes included some information on when and how to extract
the rootfs when the user is booting to NFS. Plus some other
general items like the significance of meta-toolchain-sdk as
compared to meta-toolchain.
(From yocto-docs rev: 2cc88b5193888a074ffd87cb253b9cfe08146877)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I had definitions for "The Yocto Project Files" and "The Yocto
Project Build Tree" in this chapter. They were misplaced. I have
deleted them and moved them to the development manual.
(From yocto-docs rev: 9238e75abc4578043fd625b3796b86d42204e16f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I added a couple of writer notes for development purposes. I also
formated the section title references so they have quotes around them
for easier reading in the PDF verison.
(From yocto-docs rev: 37adb580cf6c1369da43fc4ef7aaa4cc1cee0e5c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I discovered that in order to remotely deploy and debug an image from
Eclipse you have to have a Sato image. I added text to the note about
getting or building the image specifying that requirement.
(From yocto-docs rev: 060de7f6082bc3dbfa0f7d4e25b2933f15a61fc0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These edits are extensive and cross into two files: adt-prepare.xml
and adt-eclipse.xml. This is the first pass of a large re-write
to bring the examples up-to-date using the preferred version of
the Eclipse IDE (Indego 3.7). Much has changed.
(From yocto-docs rev: 57c1f905c6d66268a498e013193d003596f2303d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updated the variable name of the adt_installer.conf file that points to
the IPKG repo. This changed for 1.1. Also made some small edits.
(From yocto-docs rev: 893b8b2f4bed8d4fce9a876e2184b3f5b9b004c0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I added a link to the getting setup section of the YP dev manual for
help on setting up the YP files.
(From yocto-docs rev: 13832465de69bc41ddcc5e5696e707be8a3b6c5a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I made a pass through the manual and made some general formatting changes,
updated some links in anticipation for the 1.1 release.
(From yocto-docs rev: f2d3a012fbe4e8db3cf07e5497acfdf732e55d97)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In anticipation of 1.1 I have changes several filenames that
had "1.0" to include "1.1" instead. I am unsure if the names are
correct at this time. I will need to check them when the release is
created.
(From yocto-docs rev: ae50f920c5cf18f6c0494280a453feb41ef56d83)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Also added some general punctuation edits.
(From yocto-docs rev: e9a689655c6e88e735944084e5dda32800a6e6ca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
yocto-docs rev: 611f44a66cceafbe7593fee702d7c19951d7c751)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Armed with a better understanding of sysroot I made some edits to
help better define what is going on with the various sysroot
variables in the adt installer configuration file.
(From yocto-docs rev: 2b63e1f0f57c701eb38de7f9b9057567786b9899)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The note indicating where you can get sample kernels and
filesystems suitable for QEMU had a wrong path. I added
"machines" to the path. Also made a wording change.
(From yocto-docs rev: 75261eb7a44dcc990a817b5b59323042c38b6839)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The example command I used to setup the cross-toolchain environment
was incorrect. I added the "1.0" to it.
(From yocto-docs rev: b8bb60ec69296e9c927735f3fca86013e8b2624e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Significant re-write to every section in this chapter except the
"Setting Up the Environment" and "Kernels and Filesystem Images"
chapters. I established some terms to communicate the build and
source trees and the build and source top-level directories for
YP. These terms had not been consitently communicated. I also
stepped through each of the three methods by which a user can
install ADT (and the cross-toolchain) and meticulously documented
the steps. The result is a much more complete and clear set
of procedures.
(From yocto-docs rev: 37076a07ccc748ceb416c4bc3a57b698f6e8d80a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There was a stray "0.9" in an URL for the Yocto source downloads.
I changed it to 1.0.
(From OE-Core rev: 82890a85c0422aa6b081497be394aa756da567b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
tarball
I added a note in the "Installing the ADT" section (2.1) saying that
if you need to build the ADT tarball you can use
'bitbake adt-installer'. I also changed the location of the
toolchain from '...yocto-0.9' to '...yocto-1.0'. Finally,
I changed the host sub-directory in the toolchain directory
from 'i586' to i686'.
(From OE-Core rev: 18124c5065fc570e672d068e915e0f476d20379c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This commit is the initial draft of the preparation chapter (chapter 2).
(From OE-Core rev: c32b215eb37828cd31c0c9ba288c2216fcd034de)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The initial chapters were failing to make due to duplicate section
identifiers that were created when I copied in the original files.
I gave each of the five chapter files (adt-command.xml, adt-eclipse.xml,
adt-intro.xml, adt-package.xml, and adt-prepare.xml) unique identifier
tags.
(From OE-Core rev: d30460c835c51dcc9301bcd848ceda29ba9ceeb6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I have added a new directory to documentation named adt-manual.
This directory holds a Figures folder, and the 9 files needed
for the ADT manual. The book consists of five chapters:
adt-intro, adt-prepare, adt-package, adt-eclipse, and adt-command.
There is also a adt-manual.xml file called by the Makefile.
There is also a style.css file. And finally, a adt-manual-customization.xsl
file to control numbering.
(From OE-Core rev: ac2c8848bbefcf7d24192573904baaef87c67382)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Scott Rifenbark