| Age | Commit message (Collapse) | Author |
|---|
|
If you run bitbake-diffsigs against two differing sigdata files from
nostamp tasks it shows no difference despite the differing checksum.
Change the code so this shows up as a nostamp 'taint' and at least
makes the issue clearer to the end user.
(Bitbake rev: 97679d18955dadaa34f9450564e44da99984d140)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the number of task dependencies change you currently get
a traceback when using diffsigs.
(Bitbake rev: c6798b431571aae18bb8699ac6e3ec75b731d719)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The get/set_taskdata functions are now part of the API of the class,
ensure they exist in the base class definition so the noop handler
works.
[YOCTO #7233]
(Bitbake rev: 9b5b1bd7d77e3f5886f6c557d3b750de1f6d6025)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if you reference a file url, its checksum is included in the
task hash, however if you change to a different file at a different
location, perhaps taking advantage of the FILESPATH functionality, the
system will not reparse the file in question and change its checksum to
match the new file.
To correctly handle this, the system not only needs to know if the
existing file still exists or not, but also check the existance
of every file it would have looked at when computing the original file.
We already do this in the bitbake parsing code for class inclusion. This
change uses the same technique to log the file list we looked at and
if files in these locations exist when they previously did not, to
invalidate and reparse the file.
Since data stored in the cache is flattened text, we have to use a string
form of the data and split on the ":" character which is ugly, but is
an internal detail we can improve later if a better method is found.
The cache version changes to trigger a reparse since the previous
cache data is now incompatible.
[YOCTO #7019]
(Bitbake rev: 6c0706a28d72c591f1b75b6e3f3b645859387c7e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a nostamp task is depended on by a non-nostamp task, then we want the
signature of that task to change such that it re-executes afterwards.
This is an unusual situation, but we want this to work in OE in
externalsrc.bbclass so that compilation happens every time it is
requested.
(Bitbake rev: 73498afc3d45beede5b8f24a9acd523a1663b793)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Similar to the last shared work task signature bug, we've found another
one. Looking at the improved output of diffsigs in this case:
runtaskdeps changed from [
'autoconf_2.69.bb.do_populate_sysroot:virtual:native',
'gnu-config_20120814.bb.do_populate_sysroot:virtual:native',
'libgcc-initial_4.9.bb.do_patch:virtual:nativesdk'
] to [
'autoconf_2.69.bb.do_populate_sysroot:virtual:native',
'gcc-crosssdk-initial_4.9.bb.do_patch',
'gnu-config_20120814.bb.do_populate_sysroot:virtual:native'
]
so we can get a different task hash since libgcc sorts before gnu-config
and gcc sorts after it. We could do with a way of fixing this, the best
I can come up with is to include a single parent directory. Since
recipes are never at the top of any metadata trees I've seen, this
should suffice for now.
I'm planning to burn the concept of shared work within bitbake
and do something at the metadata level in the 1.8 timeframe as its just
too fragile as things stand and hard to fix well.
(Bitbake rev: d753644c67d163f338f2bdc3d600203e8b1a5734)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is useful code to double check the computed checksum value if nothing
else. Might as well have it in tree.
(Bitbake rev: 54ecf96c6f031927ee2410f6efde4e16f19bbf66)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Order of runtaskdeps is important. If the hashes differ we should print output.
This is complicated by shared work where the filenames themselves can differ,
but the checksum should not.
This fixes a case where two different checksums could show no output with
bitbake-diffsigs.
(Bitbake rev: 40c95cb9def282dc88234cd72ff462d7a01e47c1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to transfer some of the siggen data from the core/cooker into
the worker instances. There was a partial API created for this but
its ugly and its not possible to extend it from the siggen class.
This patch completes the interface/abstraction for the data and
means the class can extend/customise it in any siggen class.
(Bitbake rev: cf2d642052979d236185c5b8ca2c5478c06e62ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With a shared work task like gcc, the task can be run from a variety of
different recipes which may have different virtual extensions in place.
Depending on whether gcc-runtime or nativesdk-gcc-runtime's do_preconfigure
task is called for example will change the sorting of the task hashes due
to the way clean_basename currently works.
The correct thing to do here is sort on the base filename first, then any
extension when ordering the hashes. This means we do account for things
like recipes with both a native and non-native dependency but we also fix
the shared work case where we don't care whether it was a virtual version
or not.
(Bitbake rev: 2e80b5d10a5037ed6f0bc227a1f9b42529c87086)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The big warning printed when people use -f is easily ignored/forgotten.
To raise user awareness, print a warning any time we include a tainted
stamp file into a build instead.
(Bitbake rev: 18f9bcbad059608e22fca20309314e1c399acec7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows the commandline options to be processed in the dump signature
code.
(Bitbake rev: ef8537a2e9b48f4fe065a165c102935aee2c9029)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we set:
BB_SIGNATURE_HANDLER = "noop"
Then we would get the following errors:
[snip]
File "runqueue.py", line 876, in RunQueue._start_worker(fakeroot=False, rqexec=None):
"fakerootnoenv" : self.rqdata.dataCache.fakerootnoenv,
> "hashes" : bb.parse.siggen.taskhash,
"hash_deps" : bb.parse.siggen.runtaskdeps,
AttributeError: 'SignatureGenerator' object has no attribute 'taskhash'
[snip]
This patch fixes the problem.
[YOCTO #5741]
(Bitbake rev: 2bfcb751891cf3b4050e996b3c8e28678c3a8bf4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* bitbake -S throws exception when 'noop' signature handler is used
[YOCTO #5738]
(Bitbake rev: 53352e8d388b7fc4da73f95b93dcc087e76d0426)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fsync was added for belt and braces protection for things like sstate
on NFS. To be honest, it probably doesn't buy much, if the rename isn't
atomic, all bets are off anyway and there are bigger issues to worry about.
The issue is that at the end of every task, the dump_sig() code is triggered
to save out information about the task and this was triggering an fsync(fd).
Whilst it may select the file descriptor, on file systems like ext4, it will
require large parts of the journal to be written out so it can have
significant impact. latencytop showed an average fsync() call overhead of about
2s and if that happens for 5000 tasks, the time mounts up. This blocks the next
task execution by that time.
We therefore drop the fsync since in reality its causing problems and is unlikely
to buy much.
(Bitbake rev: 46fd841319479f6079d850b3813e64bd8c2680a3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The output when comparing siginfo files for dict_diff is reversed and shows
additions when things were removed and vice versa. This patch reverses the operation
so the changes are shown correctly and makes the output less confusing.
(Bitbake rev: 9b4142df36619099670740a5d3bc94e404ab2b56)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the code prints all differences. If the task dependencies have changed hash,
we recurse into those and print those differences as well. This leads to a lot
of output. The reality is if the parents changed signature, we might as well just
say that and recurse with no other output since we're much more interested in how
the parents changed in nearly all cases. The changes in the parent are probably
the same ones we'd have printed at each level anyway.
By doing this we focus the output more carefully on the thing the user wants/needs
to see.
(Bitbake rev: 7a17fd6e51a76d3582c357b79f5ef86e1969650c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Avoid storing paths to files in SRC_URI when writing out the the
file checksums to siginfo files. This prevents a move of the source
directory being reported by bitbake-diffsigs as files being removed and
then added (the signature itself is not affected since the file paths
have never been included in the signature).
This has required the format of the file checksums in the siginfo file
to be changed from a dict to a list of tuples (in order to handle
multiple files with the same name under different paths, which is
uncommon but possible); the code remains backwards-compatible with older
siginfo files that use a dict however.
Fixes [YOCTO #5245].
(Bitbake rev: e4d3077c5b0cc57964640512f3646c2d73c1d855)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All the values we need are already guaranteed to be in the lookupcache
so rather than fetch variables again, just use the cache. This gives a
small performance improvement and simplifies the code.
(Bitbake rev: 8ffaba61da7f195d7c3b64dce35b6a56272aecae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a pretty fundamental change to the way bitbake operates. It
splits out the task execution part of runqueue into a completely
separately exec'd process called bitbake-worker.
This means that the separate process has to build its own datastore and
that configuration needs to be passed from the cooker over to the
bitbake worker process.
Known issues:
* Hob is broken with this patch since it writes to the configuration
and that configuration isn't preserved in bitbake-worker.
* We create a worker for setscene, then a new worker for the main task
execution. This is wasteful but shouldn't be hard to fix.
* We probably send too much data over to bitbake-worker, need to
see if we can streamline it.
These are issues which will be followed up in subsequent patches.
This patch sets the groundwork for the removal of the double bitbake
execution for psuedo which will be in a follow on patch.
(Bitbake rev: b2e26f1db28d74f2dd9df8ab4ed3b472503b9a5c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(Bitbake rev: a4a37b6a83faa62f61433122c4583e93e64f7372)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is clearly a missing parameter from this error message, add it.
(Bitbake rev: d98be5ea69b99fb7934fc3093422f139bc37a1cc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* without this change it's hard to see what's changed:
bitbake-diffsigs sstate-cache/*/sstate-depmodwrapper-cross-cortexa8-vfp-neon-oe-linux-gnueabi-1.0-r0-cortexa8-vfp-neon-*_populate-sysroot.tgz.siginfo
basehash changed from 62f28c13172d38af917716d6d4b15ac5 to 9cf38842bcc79e0a4356856a64141548
Variable TUNE_CCARGS value changed from -march=armv7-a -mthumb -mthumb-interwork -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a8 to -march=armv7-a -mthumb -mthumb-interwork -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a8
Hash for dependent task depmodwrapper-cross_1.0.bb.do_install changed from 4494cb6c117309a9b4c541ad86c0aac5 to 1e3bcf2d14e5bd30a38350b41bb98db3
* with this change, we can see extra trailing space in first version:
basehash changed from 62f28c13172d38af917716d6d4b15ac5 to 9cf38842bcc79e0a4356856a64141548
Variable TUNE_CCARGS value changed from ' -march=armv7-a -mthumb -mthumb-interwork -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a8 ' to ' -march=armv7-a -mthumb -mthumb-interwork -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a8'
Hash for dependent task depmodwrapper-cross_1.0.bb.do_install changed from 4494cb6c117309a9b4c541ad86c0aac5 to 1e3bcf2d14e5bd30a38350b41bb98db3
(Bitbake rev: 7d85b1a383feaa072503d71d3baeb3bdcd1012a8)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Though the value of variables in the BB_BASEHASH_WHITELIST is kept out of the
checksums, dependency on them is not, at least for variables and non-task
functions. In the code, the whitelist is removed from the overall task dep
list, but not the individual variable deps. The result of this is that
functions like sysroot_stage_all and oe_runmake end up with whitelisted
variables like TERM listed in their dependencies, which means that doing
a 'unset TERM' before building will result in all checksums for tasks that
depend on those changing, and shared state reuse not behaving correctly.
This is only really a potential issue for variables from the environment, as
it's the existance/removal of the variable that's an issue, not its value, and
the other whitelisted variables are set in our metadata. This which means in
practical terms the only cases where this is likely to be an issue are in
environments where one of the following are unset: TERM, LOGNAME, HOME, USER,
PWD, SHELL. This may seem like an unlikely circumstance, but is in fact a real
issue for those of us using autobuilders. Jenkins does not set TERM when
executing shell, which means shared state archives produced by your jenkins
server would not be fully reused by an actual user.
Fixed by removing the whitelisted elements from the individual variable deps,
not just the accumulated result.
(Bitbake rev: dac12560ac8431ee24609f8de25cb1645572d350)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The "*" part of the mask is to ensure we clean both any stamp, and any
setscene varient. It turns out we would also trample other tasks,
e.g. do_package_write could trample do_package_write_rpm. do_package also
tramples do_package_write_* but this is less of an issue since the other
tasks depend on it.
Rather than use the wildcard, we can just use a list instead.
[YOCTO #3484]
(Bitbake rev: c14d831ea3f625e9a47266a0c4e6deefc924ca5a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently when we execute a task, we don't remove other potentially stale
stamps. This can mean if you switch between two different versions of a
recipe without a clean, the build can get very confused.
This patch adds in functionality to allow a wildcard expression of stamp
files to be removed when creating a new stamp file. This patch adds in
the core of the code to enable this but it also requires metadata support
to enable it.
When writing this improvement I went through several different options but
this was the only way I could find to allow things like noexec tasks to
function correctly (where stamps need to be created without the data store).
[YOCTO #2961]
(Bitbake rev: e026469b307522e5b6a680e0ae5587749d33dcae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the ability to compare the two most recent runs of a specified task,
and follow dependent hash changes recursively. This enables you to trace
back and find exactly why a task was re-run after the fact.
Note that this relies on the metadata providing a function, hooked in
as bb.siggen.find_siginfo, which allows searching in the appropriate
places to find signature data files.
(Bitbake rev: cc70181659c07e04c205e17832846acf1ff31d28)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These functions become a little bit more reusable if they return a list
containing the output rather than just printing it.
(Bitbake rev: a0ad2a947b71abcc0a1244cf139b9e9dfd8ee049)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
before:
virtual:nativeautomake_1.12.1.bb.do_compile
after:
virtual:native:automake_1.12.1.bb.do_compile
This separation ensures that the key is readable, and if necessary,
parsable.
Unfortunately this invalidates previous native sstate signatures with
OE-Core - not much that can be done about that; however that occurs
frequently during the development cycle so it's par for the course.
(Bitbake rev: 5b96c32dad256090e9bda5af0f80c7dbcc90bde8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We had one section of the code mixing tabs with spaces, which is
particularly undesirable with python code.
(Bitbake rev: 8eaa093b179e03a6003a47220540b1bc73afca17)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
are atomic
Use tempfile.mkstemp to create a temporary file in the sstate dir and move it
into place after closing. The previous code would fail in the chmod() if two
users were running jobs that touched the same signature file.
(Bitbake rev: ff11e9ac5eba2d957917664a7b91b1277d8ad548)
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Log a note when applying a taint to a task signature (e.g. when using
the -f or -C command line options) so that the user knows this has been
done.
(Bitbake rev: 0fd960fdea83874eedb541cbc2920257e0f3fb81)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If -f is specified, force dependent tasks to be re-run next time. This
works by changing the force behaviour so that instead of deleting the
task's stamp, we write a "taint" file into the stamps directory, which
will alter the taskhash randomly and thus trigger the task to re-run
next time we evaluate whether or not that should be done as well as
influencing the taskhashes of any dependent tasks so that they are
similarly re-triggered. As a bonus because we write this file as
<stamp file name>.taskname.taint, the existing code which deletes the
stamp files in OE's do_clean will already handle removing it.
This means you can now do the following:
bitbake somepackage
[ change the source code in the package's WORKDIR ]
bitbake -c compile -f somepackage
bitbake somepackage
and the result will be that all of the tasks that depend on do_compile
(do_install, do_package, etc.) will be re-run in the last step.
Note that to operate in the manner described above you need full hashing
enabled (i.e. BB_SIGNATURE_HANDLER must be set to a signature handler
that inherits from BasicHash). If this is not the case, -f will just
delete the stamp for the specified task as it did before.
This fix is required for [YOCTO #2615] and [YOCTO #2256].
(Bitbake rev: f7b55a94226f9acd985f87946e26d01bd86a35bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a dependency to each variable on a filtered list of its varflags.
This is intended to catch things such as SRC_URI checksums, varflags
controlling extra functionality from classes (e.g. the recently updated
update-alternatives class in OE-Core), etc. and ensure their values
influence the sstate checksums.
There is an exclusion list which needs to be set via bitbake.conf
(BB_SIGNATURE_EXCLUDE_FLAGS), if this is not set then the functionality
is disabled. The existing vardepsexclude mechanism can also be used to
exclude undesired varflags, but they must be fully specified, e.g.:
do_patch[vardepsexclude] += "do_patch[someflag]"
Implements [YOCTO #2517].
(Bitbake rev: 56c1ab18fcaf4ac245dcb412ed55e8e0af07883b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Gathers a list of paths to have checksums calculated at parse time, and
processes these when calculating task hashes. Checksums are cached with
the file's current mtime. Thus, changing any local file in SRC_URI will
now cause the do_fetch taskhash to change, thus forcing a rebuild.
This change adds very roughly about an 8% increase in parse time (a few
seconds) and maybe a few seconds during runqueue generation, so a fairly
moderate performance hit.
Note that since paths are resolved at parse time, this will not force
a rebuild when files are introduced which would cause that resolved path
to be different - for example, where a machine-specific version of a file
was added without otherwise changing the recipe. This will need to be
handled in a future update.
Code to hook this into the signature generator was courtesy of
Richard Purdie <richard.purdie@linuxfoundation.org>.
Implements [YOCTO #2044].
(Bitbake rev: c993b7c457f8b7776e8a5dff253bfa0724bc2cae)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We anticipate signatures being shared amongst peers in a group so ensure
they have rw-rw-r-- permissions to facilitate this.
(Bitbake rev: e4716f316152cafabebcefec7b387edeb02ad3eb)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Python documentation states:
"When opening a file, it’s preferable to use open() instead of invoking
the file constructor directly." [1]
Further in Python 3 direct use of the file constructor is no longer
possible.
1. http://docs.python.org/library/functions.html#open
(Bitbake rev: 759f953e29a7131614e5b1f0312edf2b17523675)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bitbake-runtask doesn't work since there is no taskhash (it worked
in the past, but seems recent changes made it doesn't work again), use
the basehash when there is no taskhash, just like what dump_sigtask
does.
[YOCTO #1229]
(Bitbake rev: b36f2e3803dfc494d5b171759f55faf33708e6f1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If an error occurs during finalise() (when for example we might get an
expansion error in SRCPV), log a note which mentions which recipe was
being finalised.
Fixes [YOCTO #1782]
(Bitbake rev: 56f9f8ffd92b00b916dbc2386150c83689d5beed)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The dataCache exposes much useful information to the singature generation code
for example its possible to figure out whether kernel dependencies are
important or not based on the RRECOMMENDS values.
We therefore pass this information to the handler and trust it to handle
any API changes in the dataCache structure.
For backwards compatibility, OE-Core is already updated to handle
the extra argument when it appears.
(Bitbake rev: 4ebc25155d5f96a7f63de22b52b18d045eb4dec7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* otherwise it reports lots of changed checksums just because it compares different tasks
notice linux-libc-headers_3.1.bb.do_package_write:
Task dependency hash changed from 42acced29debf54d598802474c5e9cbb to f438a54f995df77620d0727d6f4b4ce5 (for linux-libc-headers_3.1.bb.do_package_write and linux-gta04_git.bb.do_deploy)
Task dependency hash changed from 61f8babe1d10c6e7fb1423112bb04e1e to 1b3e21ff106ecfcb7ddf76a1e29537bb (for linux-nokia900-meego_git.bb.do_deploy and linux-gta04_git.bb.do_package_write)
Task dependency hash changed from 512f9d6686d760b318d8b11c8b589226 to 42acced29debf54d598802474c5e9cbb (for linux-nokia900-meego_git.bb.do_package_write and linux-libc-headers_3.1.bb.do_package_write)
Task dependency hash changed from 153e91dfd1d2053fda7b98cc08d4b802 to 92a293bdd8ed234932b87a66025038c5 (for systemd-serialgetty.bb.do_package_write and systemd-serialgetty.bb.do_package_write)
Task dependency hash changed from 730abebf9954794bb440c2f3239f79fe to 413eaebaff27a2fd16f5cf68c1f4ff17 (for systemd_git.bb.do_package_write and systemd_git.bb.do_package_write)
with this patch:
Dependency on task linux-nokia900-meego_git.bb.do_package_write was added
Dependency on task linux-nokia900-meego_git.bb.do_deploy was added
Dependency on task linux-gta04_git.bb.do_deploy was removed
Dependency on task linux-gta04_git.bb.do_package_write was removed
Hash for dependent task systemd_git.bb.do_package_write changed from 730abebf9954794bb440c2f3239f79fe to 413eaebaff27a2fd16f5cf68c1f4ff17
Hash for dependent task systemd-serialgetty.bb.do_package_write changed from 153e91dfd1d2053fda7b98cc08d4b802 to 92a293bdd8ed234932b87a66025038c5
* added test if there is different task with same hash then we don't
show it as added/removed dependency, because bitbake doesn't care
(Bitbake rev: ca52bf32b479811bd7fed41648bedcc06b00430b)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #1967]
(Bitbake rev: f6cee29bf853874876923a7d6ae8574e3801ae8d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This means that custom signature handlers can override specific parts
of the code without having to reimplement whole functions allowing them
more flexibility.
(Bitbake rev: 164195c068a656733cfe7aa07369c5ed6ea62ca5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The actual task names are discounted for comparison of dependent tasks, only
the actual hashes are used. This updates the comparison code to account for
this change, attempting heuristic matching for more user friendly output but
falling back to showing the changed hashes directly. This avoids some confusing
output to users where it looked like tasks had changed when they had not and
actually had the same hash but a different taskname.
(Bitbake rev: 7da7dff83ed765c9cde1d7f91ee1b65e49520481)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
it's changed
Some BB_HASHBASE_WHITELIST variables are in the lists of variable
dependencies for signatures. Ignore those differences in lists
since this difference does not matter
(Bitbake rev: 71b53a3f0766ca464560a1f6a449f9424fbdf7ae)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows the code to safely fall back to dumping the basehash data
if the taskhash data isn't present for some reason. We could effecitvely
obsolete the runtime option and use this approach instead exclusively.
(Bitbake rev: 5ace320ccc01f4e326f90b7ba060dcbff3380dca)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
to be forced to specific values
We have a problem if we want to inject specific information into the variable
dependency code. There are cases for example where we want a dependency
on the value of X but it doesn't matter how X was constructed or what
dependencies it might have had, we only care about the absolute value.
With the current code, its near enough impossible to do this.
This patch adds such a mechanism so the user can trigger this with code like:
baselib[vardepvalue] = "${baselib}"
It also refactors some of the code so we do variable lookups once
instead of doing this in two different functions.
[YOCTO #1583]
(Bitbake rev: 6c879b44ccf42dc73fe4467076e114700d7ba81b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this patch the tash hash dependencies can be in a order
that is dependent upon directory/filesystem layout. With this
change the data is sorted the same regardless.
Without this the dependent hashes could be in different orders
on different systems and consequently final md5 hash would differ
as well even though nothing else changed.
(Bitbake rev: 9a2029899c946ce9aa8adbc85f2cfe7a85b92182)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is useful for really longs lists to pinpoint what has
actually changed
(Bitbake rev: f1eb6d3dcc10c42bb09383a87bde3afa69bc6ed9)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Paul Eggleton
Robert Yang
Martin Jansa
Christopher Larson
Jeffrey C Honig
Joshua Lock
Matthew McClintock