| Age | Commit message (Collapse) | Author |
|---|
|
(From OE-Core rev: d2755523d339a4eba7a034bdef5563657609f563)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As part of upgrading a recipe we create the upgraded recipe file in the
workspace and then try to parse it so we can then make further
modifications. If for some reason that parsing fails then the failure
was not being handled very well - the broken recipe was being left in
place, breaking parsing until it was removed by hand. Fix that by adding
a call to the cleanup function, and fix the following issues:
* Fix the cleanup function which doesn't look like it has ever worked
due to a typo in the function call
* Fix double-printing the error message
* Remove usage of DevtoolError in this case (DevtoolError is for simple
usage errors, not this kind of issue which may be the result of a
bug).
We're still printing a traceback in this scenario but at least it
doesn't break the build system requiring manual cleanup. I also
introduced a command-line option to preserve the broken upgraded recipe
file(s) for debugging purposes.
(The reproducer for this is "devtool upgrade libnewt-python", however
you need to check out revision b82ea144e144671d3f64c0785ba4beafe905cd4f
or earlier since that recipe has now been absorbed into the libnewt
recipe. The libnewt-python recipe was causing an issue with the upgrade
because it actually included the libnewt recipe using ${PV} in the
include statement, and of course PV was changing in the upgrade.)
Fixes [YOCTO #13404].
(From OE-Core rev: c519ac360796675d7fc09a5250d21f0f5b6236fc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a setup.py file exists it ought to have something in it before we
consider the source tree to be a Python module and treating it as such.
(A counter-example is https://www.bro.org/downloads/binpac-0.50.tar.gz -
it's not clear why this has a zero-length setup.py in it but we should
pay no attention to it.)
Fixes [YOCTO #12923].
(From OE-Core rev: 548a5c8f42c6ac1b0f7962926d05276e71505678)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This switches the code to build pkgdata specific to the current recipe
which means that its filtered to the recipes dependencies and can perform
better as we can drop the lockfile.
It uses a similar method to the staging code to do this, using BB_TASKDEPDATA
to construct a list of packagedata task output which this recipe should "see".
The original pkgdata store is left unaltered so existing code works.
The lock file was there to prevent files disappearing as they were read or as
directories were listed. Since we have a copy of the data and only access output
from completed tasks (as per their manifests), we can remove the lock.
The lock was causing starvation issues on systems with parallelism.
There was also a potential determinism problem as the current code could "see"
data from recipes which it doesn't depend upon.
[YOCTO #13412]
(From OE-Core rev: 1951132576bfb95675b4879287f8b3b7c47524fa)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 9303f92599343adf645fee5d2434fadd97e7febb)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently `devtool finish RECIPE meta' will silently succeed even
if there are multiple layers having the same base name of 'meta'.
e.g. meta layer from oe-core and meta layer from meta-secure-core.
We should at least give user a warning in such case. With the patch,
we will get warning like below.
WARNING: Multiple layers have the same base name 'meta', use the first one '<PROJ_DIR>/oe-core/meta'.
WARNING: Consider using path instead of base name to specify layer:
<PROJ_DIR>/oe-core/meta
<PROJ_DIR>/meta-secure-core/meta
(From OE-Core rev: 2c8740f543c38dbaef3345e40827ef48b3f75405)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow plugin bootimg-efi to configure with multiple initrd
through source parameter.
Uses ; to separate each initrd.
e.g:
--sourceparams="loader=${EFI_PROVIDER},initrd=initrd1;initrd2"
(From OE-Core rev: c7b0823f9ab6a9959aaa809b8c3f70d199feb64d)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current QA team need to merge test result files from multiple sources.
Adding TESTSERIES configuration too early will have negative
implication to report and regression. Enable control to add TESTSERIES
when needed. Also enable adding EXECUTED_BY configuration when
needed.
(From OE-Core rev: 651d8d371e78e77599d56681228d5782664f7743)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current results stored does not have information needed to trace who
executed the tests. Enable store to add EXECUTED_BY configuration
to results file in order to track who executed the tests.
(From OE-Core rev: dca2a57d54163a2e63b06e2f140fea3bd49cef0d)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current resultutils library always add "TESTSERIES" configuration
to results. Enhance this to allow control of adding "TESTSERIES"
configuration as well as allow adding extra configurations
when needed.
(From OE-Core rev: 443c0acc14ef2451b10878fc83dd11b46805daf0)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
replaced hardcoded kernel image with KERNEL_IMAGETYPE.
set kernel image to "bzImage" incase KERNEL_IMAGETYPE not set.
(From OE-Core rev: 88a9fef761c5e67b2964fedc85a7e8ad37067564)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for generating python3 recipes using the recipetool / devtool.
Drop python2 support at the same time.
Tested with:
oe-selftest -r recipetool.RecipetoolTest
[YOCTO #13264]
(From OE-Core rev: d8b2f58974482b3b1ccc65c5f93104d0d7ba87bc)
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some file systems don't support fetching the block size (notably the file system
Docker uses for containers), so handle the iotctl() failing and raise the
expected error.
(From OE-Core rev: 3757073726a00c5250556aae3d0daac76b88085e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
allow wic to list and search for kickstart file in .wks.in extension.
basename show by wic list images to fully exclude extension.
(From OE-Core rev: 2c0a292a790ad069648e37b1b29fcea656fcf3e4)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Printing the lack of a test is not necessary (per feedback). Remove
this from the template to quieten it.
(From OE-Core rev: b1fe6ae66360e160eeaeafe456536f335a0eab60)
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the creation of test case configuration file based on user inputs.
Where this testcase configuration file will be used by the the manual
execution to run selected test cases for a module rather than compulsory
run all test cases in manual json file.
(From OE-Core rev: 73d2a747c17779da0ca972da776b3cf02c2e1cbc)
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, the code will sum all of the different machine results into a
single report of the tests results. This can lead to confusion as to
which machine may be experiencing issues. Modify the code to store the
results in a per machine basis and report them accordingly.
(From OE-Core rev: 16d4031ea5df8a4ddfdb937d35464c09e1abd10e)
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add new source parameter label to allow custom boot.conf/grub.cfg label,
so far it's hardcoded to "Boot".
Default label to "Boot" for systemd-boot and blank for grub-efi when source
parameter label are not set.
(From OE-Core rev: 7a0aab1aa31e66e6bc94c04c2f6c1043b64a8967)
Signed-off-by: Chee Yang Lee <chee.yang.lee at intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
volume name should refer to --label in .wks.
Replace the hardcoded volume name with label.
set "ESP" as default name when no lable specified.
(From OE-Core rev: 5621aceaf39ef0dc097b16c83e73b9882c987a7c)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds SPDX license headers in place of the wide assortment of things
currently in our script headers. We default to GPL-2.0-only except for the
oeqa code where it was clearly submitted and marked as MIT on the most part
or some scripts which had the "or later" GPL versioning.
The patch also drops other obsolete bits of file headers where they were
encoountered such as editor modelines, obsolete maintainer information or
the phrase "All rights reserved" which is now obsolete and not required in
copyright headers (in this case its actually confusing for licensing as all
rights were not reserved).
More work is needed for OE-Core but this takes care of the bulk of the scripts
and meta/lib directories.
The top level LICENSE files are tweaked to match the new structure and the
SPDX naming.
(From OE-Core rev: f8c9c511b5f1b7dbd45b77f345cb6c048ae6763e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds an option to dump all the ptest logs to individual files in a
specified directory. If multiple test runs are present, the
'--prepend-run' argument will create separate directories for each test
run under the target directory and put the logs there to prevent each
test run from clobbering the others.
[YOCTO #13331]
(From OE-Core rev: f262b9e7482e38f04dfa162f0aaf65b17e86f8b2)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If attempting to find a fixed SRCREV fails because the directory doesn't exit,
avoid failing with:
Traceback (most recent call last):
File "/home/vagrant/poky/scripts/recipetool", line 121, in <module>
ret = main()
File "/home/vagrant/poky/scripts/recipetool", line 110, in main
ret = args.func(args)
File "/home/vagrant/poky/scripts/lib/recipetool/create.py", line 707, in create_recipe
srcrev = stdout.rstrip()
UnboundLocalError: local variable 'stdout' referenced before assignment
Fixes: 000480c42797 ("recipetool / devtool: set a fixed SRCREV by default when fetching from git")
(From OE-Core rev: 8e4b301573071ea04911b0df6533c25bc4596b93)
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: a680d7d15fafbecf4edce9a29cc4eda16c11fd94)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 966795aa2c6960aca11a04e87f415256faf26957)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current manualexecution required user to exceute all test cases defined inside a "modulename.json" file in oeqa/manual
There are cases when all test cases all not required to run for a module on specific DUT.
Enable manualexecution to have the optional feature where it will use pre-defined json format test case configuration file
where user will be able to select test cases from the "modulename.json" instead of running all of them. This will help
in reducing testing time and reporting unneccesary skip or failures.
Example pre-defined json format test case configuration file (for build-applince):
{
"testcases" : [
"build-appliance.build-appliance.Create_core-image-sato-sdk_using_build_appliance",
"build-appliance.build-appliance.Build_a_image_without_error_(added_recipe)"
]
}
(From OE-Core rev: 3950c28a34f94b5907d37b579bdaee5a59794652)
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit f7dfb4d43247d3c13a4e0a3853007d63b9512b83.
FAT16 volumes do not have a minimum size of 8250 blocks
(== slightly over 4MB). Exhibit A: floppy disks.
The original commit message suggests this was a workaround for a bug in
parted - in which case we should fix it there, or use the wic
`--fixed-size` option to pass down an enforced minimum from a more
context-aware point in the callstack.
(From OE-Core rev: e0a1ae3863bc229512d43e4a5248551bf25950e5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix AttributeError: module 'urllib' has no attribute 'request' when
using remote http urls.
(From OE-Core rev: 9acc47236e2a9ac7f97f80040f5e508f23f01611)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds a subcommand for dumping various logs from test results
(From OE-Core rev: 454b8d2cdc6f79a51e610dae92c22352850c3f7c)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds support for resulttool to load JSON files directly from a http://
or https:// URL
(From OE-Core rev: 235bcf0c504e7ea253ccfb28d600898117c64c1f)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove duplicate codes. Replace unnecessary class variables with
local variables. Rename variables and arguments with simple and
standard name.
(From OE-Core rev: 6bef61d36f3328fad003c0dc9c010d3f76ba96d8)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When I use recipetool to add a new recipe, it says:
[snip]
sys.exit(14)
NameError: name 'sys' is not defined
[snip]
(From OE-Core rev: 051e1c27bbf6a5898f2cf13b78dd3d8d1ec31586)
Signed-off-by: Lei Yang <Lei.Yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the creation of configuration option file based on user inputs.
Where this configuration option file will be used by the the manual
execution to display options for configuration rather than user
need to inputs configuration manually.
(From OE-Core rev: 23c7a037a85a825aa088bfac3a144c14087a9f49)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current manualexecution required user to input configuration manually
where there were inconsistent inputs and human typo issues.
Enable manualexecution to have the optional feature where it
will use pre-compiled configuration options file where user will
be able to select configuration from the pre-compiled list instead
of manual key-in the configuration. This will eliminate human error.
Expect the pre-compiled configuration options file in json format below
{
"bsps-hw": {
"IMAGE_BASENAME": {
"1": "core-image-sato-sdk"
},
"MACHINE": {
"1": "beaglebone-yocto",
"2": "edgerouter",
"3": "mpc8315e-rdb",
"4": "genericx86",
"5": "genericx86-64"
}
},
"bsps-qemu": {
"IMAGE_BASENAME": {
"1": "core-image-sato-sdk"
},
"MACHINE": {
"1": "qemuarm",
"2": "qemuarm64",
"3": "qemumips",
"4": "qemumips64",
"5": "qemuppc",
"6": "qemux86",
"7": "qemux86-64"
}
}
}
(From OE-Core rev: 1af7e04223b415a64e100a9f91d60f5e9b0f789a)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The cml1 and ccmake bbclasses generate configuration fragment source
files that must be exported from the WORKDIR as a source file to be
preserved across builds. This change adds detection of the current
recipes inherited classes and for cml1 and ccmake classes checks for the
specific generated configuration fragment files. These files are then
exported by devtool and included as SRC_URI files from within the target
layer.
(From OE-Core rev: 7a1fabe4a24552ce8a50c8d6009969ca52a5fd27)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Simplify and removed unnecessary codes.
Refactor to allow pythonic loop.
(From OE-Core rev: 84c6a992e1114685194f6e8a554bce7753c090cc)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the manual execution display step by sorting
the step as string, where steps were not being sorted
correctly when there are more than 9 steps.
Fixed the step sorting by sorting step as integer.
(From OE-Core rev: 192c255d9f597b3526a5b94fcf3eedc4527189ed)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current manualexecution required pressing enter button to show each step
information, where this was wasting execution time. Enable display
full steps without needing to any press enter button.
(From OE-Core rev: e44c9a018c13208fef0dcef4479ce71977628cd4)
Signed-off-by: Mazliana <mazliana.mohamad@intel.com>
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current input checking does not match the standard input practiced
by QA team. Change the input checking to match the standard
input practiced by the QA team.
(From OE-Core rev: 630a93c740359a65249a198f314f15040042f8d3)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than simply discarding the ptest data, change the code to discard
it when writing out the new testresult files, or optionally either preserve
it, or write it as seperate discrete logs.
This means the autobuilder should start writing out individual ptest log
files as well as allowing ueers to extract these manually.
(From OE-Core rev: a1e0944bf260ef50dd7dfcb10db248fdd7f45bc9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Store operations using a single file as a source weren't working as the os.walk
command didn't like being given a single file. Fix the store operation to
work for single files.
(From OE-Core rev: eb5bbe613d8c7cbcd8b74d8ac0073c2217970410)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On some hosts the wic.Wic2.test_wic_cp_ext selftest was failing as files weren't
being copied into the rootfs with "wic cp". This was due to a bug added by:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=89d4a8df074598cfb3a76e41db7c45d845afd961
where there should be a second newline added at the end of the expression due
to the difference in the way echo -e and printf behave.
[YOCTO #13237]
(From OE-Core rev: 2f3adb21cc5067458a12964d0bde235966a20a60)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Devtool creates a git repository for extracted sources in a temporary
directory and then moves it to a final destination after patching is
done. Unfortunately devtool is not aware that some of its git operations
may have caused git garbage collector to start in background. If timing
is just right a repository move fails because GC is removing git objects
while they are being moved.
The issue was hit on Krogoth release, but the code that moves created
git repository is still the same.
Disable gc.autodetach to make GC run synchronously and block git until
it is done.
Traceback (most recent call last):
File "<snip>/openembedded-core/scripts/devtool", line 342, in <module>
ret = main()
File "<snip>/openembedded-core/scripts/devtool", line 329, in main
ret = args.func(args, config, basepath, workspace)
File "<snip>/openembedded-core/scripts/lib/devtool/standard.py", line 352, in extract
initial_rev = _extract_source(srctree, args.keep_temp, args.branch, False, rd)
File "<snip>/openembedded-core/scripts/lib/devtool/standard.py", line 644, in _extract_source
shutil.move(srcsubdir, srctree)
File "/usr/lib/python2.7/shutil.py", line 299, in move
copytree(src, real_dst, symlinks=True)
File "/usr/lib/python2.7/shutil.py", line 208, in copytree
raise Error, errors
Error: [('/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/5e', '<snip>/build/grpc/grpc_src/.git/objects/5e', "[Errno 2] No such file or directory: '/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/5e'"), ('/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/57', '<snip>/build/grpc/grpc_src/.git/objects/57', "[Errno 2] No such file or directory: '/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/57'"), many git objects ... ]
(From OE-Core rev: 3da578a79195a63fb6d4bbd68d8f1548defd205f)
Signed-off-by: Taras Kondratiuk <takondra@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We found that manualexecution does not capture test suite values
correctly if there are more than one test suite in test cases.
After verification has made we found out we should retrieved
full test cases value <test_module.test_suite.test_case> from
oeqa/manual/ json file rather than split it them into new
variables test_suite and test_cases.
(From OE-Core rev: db08ec5f48badd5be2fa24cc0d89a4386ab44a59)
Signed-off-by: Mazliana <mazliana.mohamad@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable roll-up all test results belong to a commit
and to provide a roll-up report.
(From OE-Core rev: a98a75a3db1fe9d327fd21919fb8ea09e76fb1e3)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_patch rule of SDK's workspace/appends/linux-*.bbhappend may fail if script are not written in Python
that was the case with Phytec's BSP, the fix was to replace the do_patch rule with :
do_patch[noexec]="1" when the file was generated in scripts/lib/devtool/standard.py
(From OE-Core rev: e51cb385e5573c7069de6e8308b9b68eb4a3a162)
Signed-off-by: Yann CARDAILLAC <yann.cardaillac@smile.fr>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To enable store for testresults.json file from manualexecution,
add layers metadata to configuration and add "manual" map to
resultutils.store_map.
To enable regression for manual, add "manual" map to
resultutils.regression_map. Also added compulsory configurations
('MACHINE', 'IMAGE_BASENAME') to manualexecution.
(From OE-Core rev: 7521834f8557565d3898605257c7fd9505ea22bb)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than recreating handlers and forcing them, iterate over the handlers
and enable color on ones we can handle. This makes it easier to handle color
properly when we introduce the bb.msg default log filters.
(From OE-Core rev: 713f44e0e0cde9b818c214002fd8b730d422fafa)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows '--sourceparams key1=val1=val11,key2=val2'.
(From OE-Core rev: e59bba5ee21e9065dce86b912996b893f8946535)
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sorted regression results to provide friendly viewing of report.
(From OE-Core rev: 59d827889dd8b790a7c9323c69565d6bba3041bd)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: a89846cca457de10249881ab695f0f883bfb6f40)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Ross Burton
Paul Eggleton
Richard Purdie
Robert Yang
Chen Qi
Chee Yang Lee
Yeoh Ee Peng
Maciej Pijanowski
Jon Mason
sangeeta jain
Joshua Watt
Alex Kiernan
Armin Kuster
Angus Lees
Lei Yang
Nathan Rossi
Taras Kondratiuk
Mazliana
Yann CARDAILLAC
Christopher Larson
Jan Kiszka