Age | Commit message (Collapse) | Author |
|
Removing unused includes fixes the build.
Fixes [YOCTO #10853].
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
|
|
ppp no longer provides the duplicate if_pppox.h header so no need to patch that
out of the Makefile.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
|
|
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Introducing the 4.9 kernel recipes. 4.9 will be a LTSI kernel, so we
introduce these recipes with the intent that they'll replace 4.1 as
the LTSI kernel, and other older kernels (i.e 4.4/4.8) once 4.9
shown to be stable.
linux-yocto-tiny and linux-yocto-rt are also part of this commit, but
are placeholders while we wait for their content to be available. They
will build, but provide nothing above the standard kernel at the
moment.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Bumping the linux-libc-headers to the 4.9 kernel variant. Since 4.9
will be a LTSI kernel, and there will be an associated linux-yocto
it is worth moving to these headers sooner rather than later.
This commit also drops the 4.8 headers and sets 4.9 to be the default.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
--ignore-fail-on-non-empty is coreutils specific, and you
are not always going to have coreutils on target systems
especially small ones. They will use the busybox applet which
does not support --ignore-fail-on-non-empty, use pipe and true
to ignore the errorcode from rmdir instead
Fixes upgrade errors on target e.g.
rmdir: unrecognized option '--ignore-fail-on-non-empty'
BusyBox v1.24.1 (2016-12-20 10:41:39 PST) multi-call binary.
Usage: rmdir [OPTIONS] DIRECTORY...
To remove package debris, try `opkg remove update-alternatives-opkg`.
To re-attempt the install, try `opkg install update-alternatives-opkg`.
Collected errors:
* pkg_run_script: package "update-alternatives-opkg" postrm script returned status 1.
* postrm_upgrade_old_pkg: postrm script for package "update-alternatives-opkg" failed
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The use of awk -F "." in do_install/do_deploy to strip filename extension
was deprecated long time ago in 72980d5bb465f0640ed451d1ebb9c5d2a210ad0c.
Make a similar change in postinst/postrm to properly use basename command.
Otherwise DTB files that contain dots in the name result in broken symlinks
that point to non-existent truncated files.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Make it easier to reuse the function for other dirs than EXTERNALSRC.
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
V2 incoming hopefully
This reverts commit a199d36b90b2e88a92a05c8929a2a4b0053b4905.
|
|
Only the last stamp file should be kept, but unless STAMPCLEAN matches
files generated using STAMP old stamp files may linger. This may
cause false positives for skipping tasks.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add code to verify that not only does a change trigger a build, but so
does reverting that change.
Reverting a change in a devtool managed git repo may cause the current
checksum to match the checksum of a previous build, which will cause
bitbake to skip builds that are needed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Sort keys of dict 'types' prior to dumping, in order to have
identical output every time. This could make it a little easier
to diff these human-readable dumps.
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Upgrade ncurses from 6.0+20160625 to 6.0+20161126.
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the file is expected to exist, then we should always be using require
so that if it doesn't we get an error rather than some other more
obscure failure later on.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We're placing an object into the datastore - it's very definitely not
something we want to be expanding.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you delete the log file that the oe-selftest.log symlink points to
but not the symlink itself, because we were using os.path.exists() here
the code assumed that the symlink didn't exist when in fact it still
did. Use os.path.lexists() instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Fix not decoding output from grep ("Matched in b'manifest...')
* Fix showing "Matched in b''" if no match (show "not matched to any
task" instead)
* Drop the filtering out of .populate-sysroot from matched manifest
names - it should have been .populate_sysroot so it doesn't work, and
in any case the value of removing the task name is questionable given
that we aren't removing it for any other task, and that the rest of
the filename isn't only the task name, we might as well have the whole
thing. At least then you can do a find on that exact name without
wildcards and find it.
* Fix indenting of file list entries and indent "matched in" further
underneath
* Minor punctuation fixes
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If a recipe installs a file or directory whose name contains square
brackets [ ] that form a valid glob expression and that file then they
won't be correctly removed from the sysroot, because we pass each path
in the sstate manifest to our oe.path.remove() function which calls
glob.glob() on the path passed into it and the expression won't
actually match the original filename. Since we don't expect to put any
wildcarded expressions in the sstate manifests, and we already have a
try...except around this, we can actually use os.remove() here instead.
Similarly, when we pass existing file paths to "grep" looking through
the manifests, we don't want those paths to be treated as regexes - so
use grep's -F command line switch.
Fixes [YOCTO #10836].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
filenames
Add a warning in the doc comment for oe.path.remove() about using that
function on paths that may contain wildcards in the actual
file/directory names.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When constructing a spec file we list files and directory paths in the
%files section. If ] or [ characters are in a file or directory name,
rpm treats them as wildcards which will mean it won't properly match the
filename. Instead, transform these into an ? wildcard so they don't
cause a problem.
(This fixes packaging the npm package "file-set" and anything that
happens to depend upon it, since it includes tests with files that
contain unusual characters including ] and [).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Weve now migrated to systemd-boot, the gummiboot test on wic is no longer necessary
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Since we replaced gummiboot with systemd-boot
along with its tests, the gummiboot tests are
no longer necessary.
[YOCTO #10332]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Since the gummiboot project is no longer being maintained
and we are using systemd-boot as a replacement instead,
we can now clean up all remaining gummiboot files.
[YOCTO #10332]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
After systemd-boot was introduced, its been tested for a while with no major
issues being found until now, this patch completely replaces all gummiboot
instances with systemd-boot ones, taking the next step into cleaning
up systemd-boot/gummiboot.
[YOCTO #10332]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It may be necessary to override the parameters gathered for the qemu
invocation. For example, the qemux86 machine configuration sets "-vga
vmware", but when using OVMF as BIOS, only "-vga std" is supported.
By putting the parameters derived from custom runqemu parameters like
"qemuparams" after the parameters derived from the machine
configuration the user gets the possibility to override those.
(From OE-Core rev: dd44b2eedc3befd9c8d272eb6cb2af5f419d03aa)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Requiring all build systems for external kernel modules to
place Module.symvers directly into ${B}/. is quite an
artificial assumption/requirement. It doesn't have to end
up there, but could easily end up somewhere below ${B}.
Allow to override the location below ${B}
Note that we still don't make use of multiple
Module.symvers in case there are any generated by one
single kernel module build, but this is no change in
behaviour from before and could be added if there really
is a demand for that.
Reported-by: Denys Dmytriyenko <denis@denix.org>
(From OE-Core rev: 1b5d6ea8b0680eacbd54cf1273d41cfc6592c617)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Refreshed the following patch:
* inet-6-.defn-fix-inverted-checks-for-loopback.patch
(From OE-Core rev: b5712b3c4f16ad75d8edcc445b89629ff6f65d4b)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 498a65efb92b6f3d15b4eaacddff84e6697b29f4)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If multiple providers for a utility have the same alternatives priority,
which one would be chosen is determined by which one is installed later.
Our alternatives system should be able to detect such problem and warn users
so that potential problems could be avoided.
Modify update-alternatives to warn users when detecting multiple providers
with the same priority.
[YOCTO #8314]
(From OE-Core rev: ad463d531e3bc30fda1fe3bc2751de312427344c)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrade file from 5.28 to 5.29.
(From OE-Core rev: ea773d21a3c6e329471fb40f5ee2e1d965736050)
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove kexec-aarch64.patch since it has been merged upstream
Remove kexec-x32.patch since it has been reverted upstream
Backport patches for kdump arm64 from:
https://git.linaro.org/people/takahiro.akashi/kexec-tools.git
(From OE-Core rev: 8a3d08fb37cf6ce490885cea3ef58495f993b7db)
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 0bd49d78bc3acf427d3c97404be1344496cb67e2)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add 0001-Makefile-use-weak-assignment-for-LDFALGS.patch to fix issues like:
ERROR: hdparm-9.50-r0 do_package: QA Issue: File '/sbin/hdparm.hdparm' from hdparm was already stripped, this will prevent future debugging! [already-stripped]
ERROR: hdparm-9.50-r0 do_package: Fatal QA errors found, failing task.
(From OE-Core rev: e4f315ff1621603c69af70827685a206decfe69b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove 0002-Recognize-nios2-as-compilation-target.patch which is already
in the source.
(From OE-Core rev: a2b7f442d8872afe8edec062c60264b31e860218)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Removed install.patch since it is already in the patch.
* Fix indent for file://test.sh
(From OE-Core rev: bd8b1d79b50819486e5882db05abb6b358b7392a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: dfd4c078a38c3df9ac91ae3e8d01787611bb8cab)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix iommu pci device assignment failure.
"qemu-system-x86_64: -device pci-assign,host=02:00.0: No IOMMU found.
Unable to assign device "(null)""
(From OE-Core rev: 2011d1cc6c05ff3979e4bd664ce918dc8eb8e8fb)
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
TOOLCHAIN_TARGET_TASK doesn't need to explicitly list sdk-target-dbg because if
SDKIMAGE_FEATURES contains dbg-pkgs (as it does by default) then they'll all be
installed anyway. This means that if the user removes dbg-pkgs from
SDKIMAGE_FEATURES then the SDK correctly doesn't have debug packages in.
[ YOCTO #9078 ]
(From OE-Core rev: 4c711830ae26008f73bbf557964bdb86b8c922da)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
People are struggling with multiconfig as the point the conf file
is injected into the data store is not what people expect. We can't
really use a post config since that is too late and we can't really
use a pre config file since that is too early. In OE terms, we need
something right around the local.conf point so it behaves in a similar
way.
A way to handle this is to set the new variable BB_CURRENT_MC to be the
currently selected multiconfig, then the metadata itself can choose
when to inject the approriate configuration.
(Bitbake rev: 518b9015c2be8d3894277a8e54890d6f04d656c0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fakeroot workers usually have dependencies that need to be ready before they
can be started. Starting them as a block therefore doesn't work as the
dependencies may or may not have been built. Therefore start the multiconfig
fakeworkers individually upon demand.
[YOCTO #10344]
(Bitbake rev: ab15486c636e451ed5a62e561980946887901c3b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
parallel execute
In multiconfig, mutliple tasks can execute which share the same stamp file. These
must not execute in parallel, the idea is the first should execute, the subsequent
ones should see a valid stamp and get skipped.
The normal task execution code has stamps code to handle this, this adds similar
code to the setscene execute() function to handle the issue there too.
(Bitbake rev: 937acf267fa9e45f538695b2cf8aa83232a96240)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
setscene was being entirelu skipped for multiconfig variants as the tasks
were simply not being spotted. If the default config was also being built
it masked the problem. When this was fixed by using taskfn instead of fn
in lookups against dataCache, several other instances of this problem were
highlighted.
This goes through and corrects the setscene code to correclty use taskfn
instead of fn in the appropriate places meaning setscene tasks for multiconfig
now work correctly.
(Bitbake rev: cead85cf219c07b40aeb7c0d948c25f0429136db)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Tasknames can now start with "multiconfig:" which broke the virtual: comparison code and
lead to unpredictable checksums with nativesdk recipes. This adds in handling for
the new additional prefix which unbreaks nativesdk builds when using multiconfig.
(Bitbake rev: 4da296c0c93391ec37f8b6e2245071657759771e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the UI shows X is building, possibly multiple times but doesn't
say which of the multilibs that might be. This adds a prefix to the task
name so the mulitconfig being built can be identified.
(Bitbake rev: d93ddd185dde53f50aea06ada094bb0d9b5ba4f0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
right datastore with multiconfig)
The location of the fakeroot command and the various environmental values need
to be taken from the right multiconfig datastore, not the shared one. This
patch ensures the right one is used for cases like a split TMPDIR.
[YOCTO #10344]
(Bitbake rev: 813a7600bc26b7132ac36d1515571d321f566afb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We've moved to python3, we don't need this compatibility code which just makes
the code less readable.
(From OE-Core rev: 425afe2484707640ac71194885fdb263e95e9950)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
nativesdk-libgcc doesn't need a symlink into the target space and if we do this
sstate installation of the recipe can fail depending on whether it races with
the cross-canadian toolchains.
(From OE-Core rev: b2c1e1fe4221862e0dbf5d08960f0d0228e47c72)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
People are strugling with multiconfig as the up front inclusion of the
configuration file doesn't do what people expect. The only way to meet
user expectations is to include the file immediately after local.conf.
We add BB_CURRENT_MC to bitbake so that the metadata can determine when
to include the extra configuration.
(From OE-Core rev: a6a3894fb2cb2097d2404b8b8cb2b85df595cfa9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|