Age | Commit message (Collapse) | Author |
|
Set RCONFLICTS to disallow multiple syslog daemon providers to be installed
on the target, and remove codes that deal with such situation.
Also, set ALTERNATIVE_PRIORITY back to 100. It was set to '10' in case of
systemd because sysklogd didn't have systemd support. For now, if we disallow
multiple syslog daemons to be installed, and it stays '10', then if sysklogd
is installed on target, the /sbin/syslogd would link to /bin/busybox.nosuid,
causing sysklogd service files using busybox's utility.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
|
|
Set RCONFLICTS to disallow multiple syslog daemon providers to be installed
on the target at the same time, and remove codes which dealt with such
situation.
Supporting multiple syslog daemons on the same image doesn't have much sense.
rsyslog and syslog-ng in meta-oe have set RCONFLICTS to disallow this. And
we do the same for busybox.
Also, remove the line of creating a meaningless symlink of
/lib/systemd/syslog.service to /dev/null.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
|
|
We do not want to mix traditional kernel development with
kernel development using devtool. This reference implied that
was okay to do.
(From yocto-docs rev: 38c3a5d3b47e15880ca10ed30ae4a450ecc851cd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: d5880262ab74499fbeef620af7907ee6e5d328fd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bare clone setup is no longer recommended or necessary for
traditional kernel development. All that is required is to
clone the kernel Git repo locally.
(From yocto-docs rev: cbe6d79da4fc2d5bba530b0fe6abead7783bdfbe)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 30bbe308339ad0665d59d8238e9420d1d594332e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed spelling warning that was underlining "BSP" in the figure
(From yocto-docs rev: 354fe8c39057ab3aec24474ead65d2d13a5bb3b7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A work-in-progress of an example that modifies the kernel
using the devtool. The procedure is not complete yet as it
does not run properly.
(From yocto-docs rev: 462ba2e46f237c294f05805ad5044291a085975d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The end of this section did not direct the user to the next
logical step for preparing a development host. I added a
paragraph to guide the user to the next area they would need
to read based on their development methods.
(From yocto-docs rev: 4a1aa7800e7bca82dddef0ed83e14e075b3aa9f2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed [YOCTO #11970]
Updated the field description for "Specify Sysroot Location" to
note that the user can have this either downloaded or built and
the ramifications of using a downloaded root filesystem.
Updated the "Deploying and Debugging the Application" steps for
both supported Eclipse versions to tell the user what to do if
a browse operation fails or times out.
(From yocto-docs rev: 623000af186cb5632af551f95384d4c96d4d6c54)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed [YOCTO #11209]
Rewrote so text indicates signed RPM package feeds work.
(From yocto-docs rev: 41c1e3d786f4436de59697431b2494cbabdebb8d)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added review comments to variables COMPONENTS_DIR,
and SYSROOT_DESTDIR. Added review comments to
task do_prepare_recipe_sysroot.
(From yocto-docs rev: 362998c71b44ddf89d32ed5c45e4251e932a9217)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added new description and created a link for an
existing occurance of the variable.
(From yocto-docs rev: 9ab6e6aed685c9419cb7df3df3ab029033d9ba0e)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 79d1615389f51a0856ea4130684a618abb1c6a93)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: b5ef950136b2d2bb00fdd86f971f77cb744a8c82)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 00c312e7515d82661fb16cd51f8fe9d03b4ea394)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 29458d81901336ae7c904a23e02786e024f20963)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 190b257e788d7f6f2f87e4e8c031bcda4a9f6d46)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: ae635dfc2f53e026b597c1d2ca93ecaa9416417c)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updated two instances of "sysroot-components" to
"sysroots-components".
(From yocto-docs rev: 035be964e6f345c058c1dacbb58b09745e8f827d)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
WIP at this point.
(From yocto-docs rev: 12e44f6ee7f9437d85c33d0789dbafe937af5664)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updated the step to include proper links and verbiage for
setting up the system for YP development.
(From yocto-docs rev: d5d908847d66178a995d2be985c605e6a5c48d76)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The dev-manual had a place-holder section for getting the
build host ready for using YP and then doing kernel
development. This stuff is better suited for the actual
kernel development manual. I moved the section. Moving
created several broken links in the manual set that had to
be fixed.
In the dev-manual, I updated the introductory list to include
the newly moved kernel stuff.
(From yocto-docs rev: 2e21260bb5f84e9e30eb353ec841d5962e8a7642)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The figure "figures/kernel-overview-2-generic.png" was missing
the ".png" suffix in the TARFILES statment. This was throwing
an error during the make process for the manual. Probably an
error for quite some time and not noticed. I added the suffix
to remove the make early exit error.
(From yocto-docs rev: 00ad7874f8da149f193caeab8fd89bbf6d8132d7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 7c267ede783dc25fa623673d51c49bf9535a4fcd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I moved the section on preparing a build host to use the
Eclipse IDE and placed it as introductory text for the
section that talks about getting the system ready for either
native Linux or CROPS use to use YP.
I also created as part of that list, links to the BSP manual
where I now talk about getting the system ready for BSP
development.
(From yocto-docs rev: f5b5d27ea5036792a96c0a42a3d7513a2a57a4b0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The YP Development Manual had some build host preparation steps
as part of the chapter that talks about getting a host ready
for using YP. These steps are better suited in the BSP Guide.
I moved them there and filled out the steps to be more complete.
(From yocto-docs rev: 2277812d0dd411a103a4a4252d4cb90c471901c9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Moved the "Patching the Kernel" section, which was in the
dev-manual to the kernel-dev manual. During the move,
renamed the section to "Using devtool to Patch the Kernel".
This move bothered a lot of links so I had to fix them in
various manuals.
(From yocto-docs rev: a000be1eddf33e4d7de8f350e076d48e27ca4b98)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The steps needed updated to reflect the introduction of CROPS
as a way to prepare a build host.
(From yocto-docs rev: 8f52372afad4c32d0b895a88c2298625e7f53da3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These references now go to the ref-manual and not the
dev-manual.
(From yocto-docs rev: e58681488c307ba1daf2e10423e56b7d3ec486b8)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added SYSROOT_DESTDIR to the variable glossary.
(From yocto-docs rev: 37388eccf162811ba7b9fd3ee3c110a8fa0f2556)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 68dafc1a68d48a8fe5292185d5ca62d1bdcd80ab)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the introduction of CROPS as a way to set up the build
system, I had to alter the first bullet of the BSP workflow
list and the figure.
(From yocto-docs rev: f1db3db4053142619c62629d4b05023f0b148e6c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that we have CROPS as an option, the step for preparing
your build host is condenced to include cloning poky. This
resulted in removal of step 2 and updating of the figure.
(From yocto-docs rev: 903d1f98b736a744de1d9c973f7a96b6a92049b5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This section failed to mention the "yocto-layer create" script,
which is a simple way to create a layer. I have added this info
into the section by way of a "Tip" box.
(From yocto-docs rev: cf204f2b72b1da0104315f54cfe55c3f1eaf0f96)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 80c60be5f560d20ee60270df0de2c86b23e004df)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Edited OpenEmbedded reference in "Recipe-specific
Sysroots" secion. Edited bullet title in
"Recipe-specific Sysroots" section.
(From yocto-docs rev: b2ee4bb8b31d5c7df22287ae390e68c845ec0732)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added a missing closing parenthesis. Edited Note for
for file clarification.
(From yocto-docs rev: fd7bb7aa57cfcf8b77f82edea65773e50e751902)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replaced "recipe_work_directory" with "${WORKDIR}"
throughout the section.
(From yocto-docs rev: a961cf07cd18d06e0c6399a10dc40c0d4143c23f)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updated text for sysroot terminology, and clarity.
Fixed a capitalization error.
(From yocto-docs rev: 4eea6497663efc937cddf4700298f5824ade7b47)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed xsltproc package in Fedora, CentOS, and
openSUSE Documentation required packages. Removed fop package in
openSUSE Documentation required packages.
(From yocto-docs rev: 58c4384974ac29f6f591a51d66a5041a29695e76)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The section on recipe syntax that was buried in the creating a
new recipe section was really a reference on syntax. I have moved
it to the ref-manual.
(From yocto-docs rev: cb55d1b5832cca6faa6e2a5b26f3add3032cade2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bump to the latest stable kernel for 4.4, 4.9, 4.10 and 4.12. Also
set the default kernel to 4.12.
(From meta-yocto rev: 4e0ada1132db54a1723e3a603fa99b0b8ddf29eb)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
BB_SERVER_TIMEOUT=100 oe-selftest -r bblayers
was failing and highlighted that since parseConfiguation clears data
structures, it needs to also clear parsecache_valid as it no longer
contains correct data.
(Bitbake rev: 7234f33a7eb38ad51a8345f6689bc26e29f29f92)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
commandline option
I can't actually see how this was working, nothing connected the commandline option
to the data in TaskData(). Drop the remaining pieces of this option, it was a relic
from a decade ago and we want deterministic builds, not random tries until something
might work.
(Bitbake rev: 767c7ba8fc76ec667ac1567de1c971c3575f2ecd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The top level LICENSE file is not actually a license, it refers
other licenses that are used by Bitbake and Meta-data. Relying
on this file could cause problems for recipes when this file
changes, which it is about to.
(From OE-Core rev: a1948ab38c9cb7f0b16cce9dadc03ae6e2fe44ad)
(From OE-Core rev: dd75644db2f662f0d88529a068bbfb599c9790a9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Perl dependencies may look as "Perl(Foo::Bar)", but dpkg does not
support the non-alphanumeric characters. There was already special
handling present for turning '(' and ')' into '__'. This change does
the same for ':'.
(From OE-Core rev: a34e397095a9c2f8d0af1168ceab295af659242d)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The silent rpmdeps failures fixed in a preceeding commit mean we
need to rerun all packaging.
(From OE-Core rev: 77abe012c496a85f56191abc769a7da07e9f8c0e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When systemd is used, it will invoke a service on first boot that triggers
a rebuild of ldconfig caches (rebuild dynamic linker cache).
This is fine on the first boot of a system that has been installed, but it
makes no sense on a live system. The worst part is that rebuilding this
caches is slow and it causes the live system to take longer to boot.
(I measured this in 30 seconds longer on a standard PC system booting
core-image-sato live from an USB memory).
Disable this by touching /etc/.updated and /var/.updated on the live initramfs.
For more details see https://bugzilla.redhat.com/show_bug.cgi?id=1201725 and
https://www.freedesktop.org/software/systemd/man/systemd-update-done.service.html
(From OE-Core rev: d73493e63c506dca0e767ff183ca36bc48c2f03e)
Signed-off-by: Carlos Alberto Lopez Perez <clopez@igalia.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
https://lists.gnupg.org/pipermail/gnupg-announce/2017q3/000413.html
(From OE-Core rev: 404cdecec24bc2ed4e2cacc76cd50db7622171cd)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|