| Age | Commit message (Collapse) | Author |
|---|
|
* ls.c license checksum is changed, but the license remains the same.
* The backported patch 0001-doc-fix-Up-field-of-realpath-usage-examples.patch
is dropped.
* The new version provides native manual page support, there's no
need to download extra manual page from gentoo site.
* man-decouple-manpages-from-build.patch is removed, as new version
has manual page support in environment lacking of perl.
* hostname is explicitly enabled to keep the same with previous recipe's
behaviour.
* ALTERNATIVE_XXX settings for lbracket.1 are removed as there's no such
file.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
|
|
If a fetcher, e.g., git, is run when pseudo is active it will think it
is running as root. If it in turn uses ssh (as git does), ssh too will
think it is running as root. This will cause it to try to read root's
ssh configuration from /root/.ssh which will fail. If ssh then needs to
ask for credentials it will hang indefinitely as there is nowhere for it
to ask the user for them (and even if there was it would not access the
correct private keys).
The solution to the above is to temporarily disable pseudo while
executing any fetcher commands. There should be no reason for them to be
executed under pseudo anyway so this should not be a problem.
RP Ammendum:
We finally did get more information about how to reproduce this problem,
something needs to trigger bb.fetch2.get_srcrev() in a pseudo context,
for example when AUTOREV is in use or the recipe doesn't have a defined
SRCREV. That SRC_URI needs to be using protocol=ssh. This would trigger
an ls-remote of the remote repo and if that happens under pseudo, the
wrong ssh credentials may be attempted which can hang.
[YOCTO #12464]
(Bitbake rev: ceaca281cafa662aa2385b95641bce309dce843d)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The cfg property on events doesn't add much, all code appears to access
"data" at this point. Remove it to clean up the interface.
(Bitbake rev: bd4b9e4460b60f142c3bf346fb04e360e512eaee)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make sure build host references do not end up being compiled in the image.
This only affects libicutu and icu-dbg.
(From OE-Core rev: e9dfe7eb7f61b909ae7d034e80cfbebc1fad018b)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Improve reproducibility: Remove all build host references from
distributed files.
Do not package non-linux OS related files.
Also remove some additional files not needed by run-ptest. (There are
probably still more files that can be removed, but as long as they
don't leak build host references they are harmless).
Fix the expected checksum of MakeMaker/lib/ExtUtils/Liblist/Kid.pm
to match the one expected: We modified the file, but did not
recalculate/update the file checksum accordingly.
(This fixes the only failing test.)
(From OE-Core rev: 497b28d9ff0c094768462991709bfb19efa0fa56)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove various build host references scattered within
comments in numerous files that are distributed in the package.
(From OE-Core rev: a924ea675de846f9582a9a6a9b334be1f74f826d)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't have latex2man in HOSTTOOLs so documentaion is never built but this
dependency does cause problems on older releases like morty, pre-HOSTTOOLS.
Document the configuration explicitly in master.
(From OE-Core rev: 95a5ab819df324e7ec8068bb3575e55cad022e3a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bump to stable kernel release v4.12.18.
(From meta-yocto rev: 11245b435230808e899e475e620b25b44599cd06)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bump to stable kernel release v4.9.65.
(From meta-yocto rev: 074666026257a11dc5c24b16fbd3cb732fdc32d6)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bump to stable kernel release v4.4.93.
(From meta-yocto rev: d34f1b28d08c3943b1b30944b4e79e193d0a8237)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bump to the latest stable kernel for 4.4, 4.9 and 4.12.
(From meta-yocto rev: f77e7b8c816742fbf5790f11997746958c593f1e)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
seds can get stale without warning and repeated application can cause problems,
so move the gtk-doc seds into a patch.
(From OE-Core rev: a704411ab0f1e5f8cbf57ff54b36d60ccaf0d223)
(From OE-Core rev: e0a4e78b879eeacff8ef6803c1345056abf018e7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cmake.bbclass now ensures that ${datadir}/cmake ends up in the dev package,
so this recipe doesn't need to do so itself.
(From OE-Core rev: bb70e05e709d1e1bb1e2a490d1de244fba703f54)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cmake.bbclass now ensures that ${libdir}/cmake ends up in the dev package,
so this recipe doesn't need to do so itself.
(From OE-Core rev: 24ff3202f9177bc9f2186404ca7abda01d09580f)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cmake.bbclass now ensures that ${libdir}/cmake and ${datadir}/cmake end up
in the dev package, so this recipe doesn't need to do so itself.
(From OE-Core rev: f6b4f06c5b11860f02b896286471b5cbb57b66ae)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cmake.bbclass now ensures that ${libdir}/cmake ends up in the dev package,
so this recipe doesn't need to do so itself.
(From OE-Core rev: d860e2f36f3561532972edd04062392a40a0c8d6)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cmake.bbclass now ensures that ${datadir}/cmake ends up in the dev package,
so this recipe doesn't need to do so itself.
(From OE-Core rev: f8f260aae265c682e404b0e89615fb6ef5b76601)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Various recipes that inherit cmake contain FILES_${PN}-dev magic to add the
generated package files to their -dev packages. Since this is a standard
feature of cmake, we might as well teach cmake.bbclass to do this itself so
those recipes can be simpler.
(From OE-Core rev: d91dc4666683a96e9d03cbbd21b8a546f9069c93)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this the paths to git-make-shallow are incorrect and cause test
failures if bitbake isn't executed from cwd or PATH.
(Bitbake rev: 643eacb162b8710330ef292bfda21cfeab97f95c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change adds EventClassesTest class to bb/tests/event.py,
including 47 new test cases for the public interfaces of the
bitbake event and related helper classes.
[YOCTO #10773]
(Bitbake rev: ee5fe4431713b8a29bdb424a29460965374b3234)
Signed-off-by: Jair Gonzalez <jair.de.jesus.gonzalez.plascencia@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove assignments from non-returning calls.
(Bitbake rev: a8cac827dd15227a3940ea25c673d91b5e2c2a75)
Signed-off-by: Jair Gonzalez <jair.de.jesus.gonzalez.plascencia@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Test the triggering of bb.event.worker_fire callback.
(Bitbake rev: daa59a2057c811b20d75235526ac6c2079ac6e10)
Signed-off-by: Jair Gonzalez <jair.de.jesus.gonzalez.plascencia@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change includes unit tests for the following functions,
helper class and methods in bitbake.event:
- set_eventfilter(func)
- set_UIHmask(handlerNum, level, debug_domains, mask)
- getName(e)
- class UIEventFilter(object)
def __init__(self, level, debug_domains)
def update(self, eventmask, level, debug_domains)
def filter(self, event)
[YOCTO #10773]
(Bitbake rev: 4a19dde704fd0bf262ea991ef530f991a4897d31)
Signed-off-by: Jair Gonzalez <jair.de.jesus.gonzalez.plascencia@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are several different manuals by now, all of which produce
output. The "eclipse" directory might even have been present the last
time .gitignore was updated.
Ignore the files and directories that can be generated during "make
DOC=<directory>" as well as "make DOC=<directory> pdf". While at it,
make sure the patterns only match for the top-level documentation
directory.
Signed-off-by: Sascha Silbe <x-yo17@se-silbe.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It had been removed since 2011:
commit b774bf44ef004276da12a83ebd69715c00b596ac
Author: Lianhao Lu <lianhao.lu@intel.com>
Date: Tue Aug 16 16:26:49 2011 +0800
package(_ipk).bbclass: opkg using ALL_MULTILIB_PACKAGE_ARCHS
(From OE-Core rev: e03cfb5a04e359c0bacb002dc80f3348301445d3)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This can make debug easier, for example, makes it easy to run the
command mannually.
(From OE-Core rev: 220b912237da78d257c5310bd07db89489afede1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is duplicated to previous.
(From OE-Core rev: 1309b800fbc48bc6a3b7864eb7827b24f855ddac)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It had been dropped by:
commit 65581c68d130fa74d703f6c3c92560e053857ac7
Author: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Date: Mon Feb 13 16:44:48 2017 +0200
rootfs_rpm.bbclass: migrate image creation to dnf
(From OE-Core rev: 38df1653da65a8a4e5f84b369b699307d5b4fc4f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Otherwise it doesn't work since SYSTEMD_SERVICE_volatile-binds is not defined
when multilib.
(From OE-Core rev: ccdc709655470af942afccda879e6f8484bebc5e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 52f121a726da573c90e5857caff95e50b01ea02a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It had a problem when nested layer before, e.g.:
layer_a/layer_b/
And when layer_b is handled before layer_a, then layer_a dir existed, so
it would be treated as already handled, which was wrong, check
conf/layer.conf can fix the problem.
(From OE-Core rev: 2eaefa0c3ae589111266c7d6822428ad910415f4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous code:
os.rename(sdkbasepath, temp_sdkbasepath)
try:
foo
finally:
os.rename(temp_sdkbasepath, sdkbasepath)
always renamed the path, it made the debug harder when error happened.
drop the "try: finally" makes the debug easier.
(From OE-Core rev: 32126512349d65f0dbc31196c4ec6e1a1147cf5e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Otherwise it would generate lines like the following when multilib:
INHERIT += "own-mirrors"SSTATE_MIRRORS += " \n file://.* file:///path/to/../share/sstate-cache/PATH"
(From OE-Core rev: 65b2a0e1ba7e176f3e405ed8968665660fc414d3)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is very useful for debugging. The similar to testsdk.bbclass.
(From OE-Core rev: de30b61b87047f61de4629f8e5bd87598de7fd0c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
pulse is added as a system user, so the group 'pulse' is
meant to be a system group as well, which is the same with
other distros like ubuntu/centos.
(From OE-Core rev: 1bd599eae46127115ecf5c45c70d7f60d1209c94)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: ad9a2ed069d6521710a73f942ea59ef91846f681)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The packages loosely follow the debian package names. In that way more
projects, e.g. Qt5 for 16-bit, are able use system libraries. This does
not change the existing default package.
(From OE-Core rev: 5ce6409fd588605648a51bd2f5825fd9ae147f79)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you have a recipe which does not include SRCPV in PV but does set
SRCREV = "${AUTOREV}" and you run do_fetch, then change the repo to a
new commit then run do_unpack, do_unpack will fail since the new commit
doesn't exist in the repo that was fetched.
The problem is the revision chosen is not represented in the do_fetch
task hash. It if were, the fetch would rerun first and the commit would be
present. It works when PV includes SRCPV since that does contain the chosen
commit from the AUTOREV.
The solution is to include the SRCPV value into the representation of AUTOREV
used for checksum calculation purposes.
Add a selftest for this issue.
(From OE-Core rev: 7b8ee9285a197784d51e339f1603240f49435846)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To make it easier to debug problems with renaming caused by debian.bbclass,
explicitly log when packages are renamed.
(From OE-Core rev: 2c27df943035b4df7c5d0be1ab8d0f4f3a31f4d2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe installs the test suite by copying the entire build tree into
/usr/share/ptest, which is both wasteful and breaks packaging as lz4-ptest then
gets renamed by debian.bbclass to liblz4.
(From OE-Core rev: b1ef094bc0bba54bd54b03c0a3c082d9b6025895)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When the gtk-doc API documentation is enabled (via the api-documentation DISTRO_FEATURE, typically) this recipe fails to build:
WORKDIR/build/docs/validate/gst-validate-scan: line 117:
WORKDIR/build/docs/validate/.libs/lt-gst-validate-scan:
No such file or directory
Forcibly disable the gtk-doc for now.
(From OE-Core rev: 5d221ff20dffb2e119047f931e270b5a0ebf2ae1)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We see occasional network glitches which break this test. Use our own
mirror (which has a .gz instead of .bz2) to avoid the errors, we're not
trying to test network connectivity.
(From OE-Core rev: 038d7270aef0cccf87d50a117160c58261beb9b9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For various reasons we need to be able to set and override this from
auto.conf on our test infrastructure. We have tried forcing the variable
but this then breaks other selftests. In the interests of not complicating
things further and needing to modify the tests across releases, weaken
the default assignment.
(From meta-yocto rev: be0a707eea3f0015eb7e2df2d1fd07164c2a627d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Switch to using current repository, switch to meson (following
upstream), rename the recipe like upstream.
Add a patch to install the player binaries.
(From OE-Core rev: ac695195077dd12e41f6104e5cc77ec2cf03af11)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop autotools-specific patches.
Rename polkit packageconfig option to sysprofd as 'polkit' does not
at all match what is happening.
Remove --enable-compiler-warnings, as the equivalent in meson
could not be found.
(From OE-Core rev: 2c2684c8338bf4bb9f08951a3fdd0ee194a88db4)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop libunwind option, as it is only used if tests are enabled
(and they're unconditionally not enabled).
(From OE-Core rev: 77119831bebfcb6fbb77f5f71351666dd99483e9)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a patch to work around absence of dlvsym() on musl
(wasn't previously a problem as autotools weren't building tests by default)
(From OE-Core rev: aaa523e87c73abc2cf8cf3ea55d9e2c6789d3b9a)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Note that meson flags for gobject introspection and gtk-doc
appear to be non-standardized; going forward we should devise
a common way to deal with it.
gettext inherit is removed, as there is no equivalent functionality
in meson; NLS bits are always built and installed.
(From OE-Core rev: 3d63c2cd2e8da0206297c69cdbdbf2688c13a9be)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The update to 0.44.0 did not add this patch required for qt builds.
(From OE-Core rev: 2aa0400c629e5d63ab6e70be32efa23b77a92eae)
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Although the meson crossfile should take care of setting the right cross
environment for a target build, meson slurps any set CFLAGS, CXXFLAGS,
LDFLAGS, and CPPFLAGS from the environment and injects them into the
build (see mesonbuild/environment.py:get_args_from_envvars for details).
This means that we are seeing native CFLAGS, CXXFLAGS, LDFLAGS, and
CPPFLAGS in the target build, which is wrong and causes build failures
when target and native have libraries in common (the linker gets
confused and bails).
That said, we *do* need to set certain vars for all builds so that meson
can find the right build tools. Without this, meson will fail during its
sanity checking step because it will determine the build tools to be
unrunnable since they output target instead of native artifacts.
The solution to all of this is to set CC, CXX, LD, and AR globally to
the native tools while setting the other native vars *only* for the
native build. For target builds, these vars will get overridden by the
cross file as we expect.
(From OE-Core rev: de7ae028c65a978969b2e06fdc1a2d08bc141a5b)
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Chen Qi
Peter Kjellerstedt
Richard Purdie
Juro Bystricky
Anuj Mittal
Kevin Hao
Ross Burton
Mike Crowe
Jair Gonzalez
Sascha Silbe
Robert Yang
Jackie Huang
Alexander Kanavin
Stefan Müller-Klieser
Jussi Kukkonen
Ricardo Ribalda Delgado
Martin Kelly