| Age | Commit message (Collapse) | Author |
|---|
|
- OVSDB:
* Changed format in which ovsdb transactions are stored in database files.
Now each transaction contains diff of data instead of the whole new
value of a column.
New ovsdb-server process will be able to read old database format, but
old processes will *fail* to read database created by the new one.
For cluster and active-backup service models follow upgrade instructions
in 'Upgrading from version 2.14 and earlier to 2.15 and later' section
of ovsdb(7).
* New unixctl command 'ovsdb-server/get-db-storage-status' to show the
status of the storage that's backing a database.
* New unixctl command 'ovsdb-server/memory-trim-on-compaction on|off'.
If turned on, ovsdb-server will try to reclaim all the unused memory
after every DB compaction back to OS. Disabled by default.
* Maximum backlog on RAFT connections limited to 500 messages or 4GB.
Once threshold reached, connection is dropped (and re-established).
Use the 'cluster/set-backlog-threshold' command to change limits.
- DPDK:
* Removed support for vhost-user dequeue zero-copy.
* Add support for DPDK 20.11.
- Userspace datapath:
* Add the 'pmd' option to "ovs-appctl dpctl/dump-flows", which
restricts a flow dump to a single PMD thread if set.
* New 'options:dpdk-vf-mac' field for DPDK interface of VF ports,
that allows configuring the MAC address of a VF representor.
* Add generic IP protocol support to conntrack. With this change, all
none UDP, TCP, and ICMP traffic will be treated as general L3
traffic, i.e. using 3 tupples.
* Add parameters 'pmd-auto-lb-load-threshold' and
'pmd-auto-lb-improvement-threshold' to configure PMD auto load balance
behaviour.
- The environment variable OVS_UNBOUND_CONF, if set, is now used
as the DNS resolver's (unbound) configuration file.
- Linux datapath:
* Support for kernel versions up to 5.8.x.
- Terminology:
* The terms "master" and "slave" have been replaced by "primary" and
"secondary", respectively, for OpenFlow connection roles.
* The term "slave" has been replaced by "member", for bonds, LACP, and
OpenFlow bundle actions.
- Support for GitHub Actions based continuous integration builds has been
added.
- Bareudp Tunnel
* Bareudp device support is present in linux kernel from version 5.7
* Kernel bareudp device is not backported to ovs tree.
* Userspace datapath support is not added
- ovs-dpctl and 'ovs-appctl dpctl/':
* New commands '{add,mod,del}-flows' where added, which allow adding,
deleting, or modifying flows based on information read from a file.
- IPsec:
* Add option '--no-cleanup' to allow ovs-monitor-ipsec to stop without
tearing down IPsec tunnels.
* Add option '--no-restart-ike-daemon' to allow ovs-monitor-ipsec to start
without restarting ipsec daemon.
- Building the Linux kernel module from the OVS source tree is deprecated
* Support for the Linux kernel is capped at version 5.8
* Only bug fixes for the Linux OOT kernel module will be accepted.
* The Linux kernel module will be fully removed from the OVS source tree
in OVS branch 2.18
fix some do_patch error about local patch.
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
CVE entries are using version 2.xx.xx, our PV is 2.13+xxx, this causes
problem for CVE detection. So we need to set a CVE_VERSION for better
CVE scanning.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
/var/run has been deprecated by systemd, so use /run instead,
as suggested by systemd.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Another straightforward uprev with one fairly large change in the
changelog. The Open Virtual Network component has now been moved to
its own repo (https://github.com/ovn-org/ovn.git). If you were using
this functionality a new recipe will need to be created.
The ptest results are similar to after the v2.12 uprev
ERROR: 2206 tests were run,
28 failed unexpectedly.
62 tests were skipped.
The failed tests were in the following areas:
checkpatch.at (5)
ovs-ofctl.at (1)
tunnel.at(1)
tunnel-push-pop.at(3)
tunnel-push-pop-ipv6.at(3)
dpif-netdev.at (1)
pmd.at(1)
ofproto-dpif.at (7)
bridge.at (2)
ovsdb-idl.at(1)
mcast-snooping.at(1)
packet-type-aware.at(2)
None of these affect core functionality or usecases and are similar to
the results we see with v1.12. If specific usecases are affected by
these failures we should address them on a need to fix basis.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
A mostly straightforward uprev. Unfortunately a required patch for
python3 is only available on a non-release branch so we must carry it
in order to build (the discussion on the mailing list was that an
uprev might have avoided this, but this is not the case).
The ptest results are similar to after the v2.11 uprev
ERROR: 2413 tests were run,
23 failed unexpectedly.
383 tests were skipped.
NOTE, however, that they have now marked many tests as 'skipped', such
as the python2 results, so the failed and skipped numbers have
essentially swapped with each other. The failed tests were in the
following areas:
checkpatch.at (5)
ovs-ofctl.at (1)
dpif-netdev.at (1)
ofproto-dpif.at (6)
bridge.at (2)
ovn.at (2)
ovn-controller-vtep.at (6)
Most were issues with the test or expectations that source code would
be available. There might be an issue around packaging of
"/vswitchd/vswitch.ovsschema" but we should be able to overlook this
for now, as we have with previous versions.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
openembedded-core commit fb064356af61 [Remove LSB support] dropped the
'lsb' recipe which caused openvswitch to throw a dependency fail for
both sysvinit and systemd builds. LSB init functions for
log_begin_msg, log_end_msg and others were being used. We now use the
functions from ovs-lib which are part of OVS and supply the remaining
ones directly. This allows us to regain the functionality and drop the
dependency on 'lsb'.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Install ovs-systemd-reload as openvswitch.service uses it.
openvswitch.service:ExecReload=/usr/share/openvswitch/scripts/ovs-systemd-reload
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
The v2.11 version fixed a bug as follow.
Error info:
ovs|00002|db_ctl_base|ERR|external-ids:hostname=: argument does not
end in "=" followed by a value.
The result of ptest between v2.11 and v2.10.1 is similar.
v2.11:
ERROR: 2765 tests were run,
317 failed (1 expected failure).
85 tests were skipped.
v2.10.1:
ERROR: 2662 tests were run,
311 failed (1 expected failure).
85 tests were skipped.
I checked the detailed result. The failed tests were mostly related
to python2 as the image only use python3.
Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
This change reduces the length of ${PV} for several recipes and gives us
auto-incrementing version numbers.
Signed-off-by: Paul Barker <paul@betafive.co.uk>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Pickup the latest security and bug fixes for openvswitch.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
|
|
Openvswitch recipe depends on the kernel source, which is machine specific.
It can then use this machine specific resource to configure and build the
recipe. This mix causes the hash values of this package to change based on
the machine, so this package must also be a machine_arch package.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
The openssl library is an optional component for the openvswitch. The
problem with it enabled by default is that it will consume system
entropy to try to initialize the openssl library even though we are not
using it by default. With the 4.16 kernel and up there is not always
enough entropy available at the early boot time which can cause a
lengthy stall, while waiting to initialize the openvswitch.
If ssl is needed, it can of course be turned on with the package
config option "ssl".
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Since `229f4e9 package.bbclass: add support for
pkg_postinst_ontarget()' applied in oe-core, use
pkg_postinst_ontarget to run postinst at first boot.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
The service currently fails to run since the runtime directories
aren't being created. Create the runtime directories and fixup the
path to echo to get things working again.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
The current version (v2.9.3) started to fail to build due to changes
in openssl. Upstream must have run into similar issues as this was
identified and addressed in v2.10.0 by including a copy of
'dhparams.c' instead of relying on it being generated. (see commit
"dhparams: Add pregenerated .c file to the repository.")
Additionally v2.10.0 is better aligned for our kernel and dpdk
versions:
kernel
===
2.10.x 3.10 to 4.17
dpdk
===
2.10.x 17.11.3
The changes in this commit allow for the building of v2.10.0. A second
commit will be necessary to deal with a few runtime changes which
prevent ovsdb-server from starting correctly.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
commit 1fd1ff372014 [openvswitch: uprev to v2.9.2] left a bunch of
unused patches in place. Remove unreferenced patches as they are no
longer needed.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
This brings us up to date with the latest upstream release. I suspect
there will be an upcoming release to add compatibility with DPDK
v18.05 (the DPDK release is due out any day now) but getting this
fairly large release bump out of the way first will facilitate any
upcoming uprev.
We are able to drop they python3 patches as they have been merged
upstream. Some scripts which needed to be updated to use python3
disappeared, new ones appeared so the 'use python3' patches are
updated accordingly. Beyond this the biggest change is related to the
systemd unit files, the ovsdb-server has been updated upstream to be
generated on the fly via the spec file, we mimic this in the
install_prepend. We also add the various configuration files which the
unit files source before launching the services.
As usual this was tested against out typical usecases including usage
in meta-overc. As well the ptests have been run and the results are no
better or worse.
Previous version:
ERROR: 2332 tests were run,
21 failed unexpectedly.
3 tests were skipped.
New version:
ERROR: 2527 tests were run,
29 failed unexpectedly.
3 tests were skipped.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Refresh patches with devtool command to fix do_patch warning.
Drop CVE-2017-9263.patch since it had been fixed upstream.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Several python3 packages have been removed as the functionality has
been moved into python3 core. As such we can no longer RDEPENDS on
these packages, nor is there a need to.
See similar commits in meta-openembedded:
df997e0747de - Remove deprecated python3-subprocess from the RDEPENDS
90b1f996af78 - Remove deprecated python3-argparse from the RDEPENDS
ef52e9980433 - Remove deprecated python3-lang from the RDEPENDS
This is fallout from openembedded core commit:
54ac820b8a63 - python3: Restructure python3 packaging and replace it
with autopackaging
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
|
|
Eventually we will have to move to OVS 2.8.x or 2.9.x to support the
version of DPDK in meta-dpdk but before we make a version jump(s)
let's uprev to the latest 2.7.x stable release.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
If you have in your $CC from the compiler template any kind of
directive which contains a comma character it is going to cause ovs to
not build due to the macro expansion in the Makefile:
CC = $(if $(C),env REAL_CC="'"$CC"'" CHECK="$(SPARSE) -I $(top_srcdir)/include/sparse $(SPARSEFLAGS) $(SPARSE_EXTRA_INCLUDES) " cgcc $(CGCCFLAGS),'"$CC"
Put more simply:
CC = $(if $(C), CONFIGURE_CC_DEFINITION, cgcc args CONFIGURE_CC_DEFINITION)
The CONFIGURE_CC_DEFINITION for the i585-nlp definition had
"-Wa,-momit-lock-prefix=yes". The comma there caused a strings to
"break" in the wrong place in the $(if) macro and the build of recipe
will fail with the error shown below:
/bin/sh: -c: line 1: unexpected EOF while looking for matching `"'
/bin/sh: -c: line 3: syntax error: unexpected end of file
The solution is to transform the "-Wa," -> "-Xassembler ".
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Openvswitch has been created to search for and use both py2 and py3,
with a preference for py2. There is no configure option to force the
use of py3 only, and many of the scripts only use the value of PYTHON
and not PYTHON3 (again there is a general preference for py2). In
order to force this issue we set PYTHON to 'python3'. This isn't ideal
but allows for the desired outcome without us having to carry changes
against upstream OVS.
During our py3 work with OVS this change was identified but for some
reason was not included as part of the already merged changes.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Add PACKAGECONFIG for libcap-ng, and default to enable it.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Add dpdk as a runtime dependency when 'dpdk' PACKAGECONFIG is enabled.
Also, introduce a variable DPDK_INSTALL_DIR, and default it to /opt/dpdk.
This is because users might install DPDK into different locations,
e.g. /usr. And it would easy for users to override this variable
to make openvswitch build with dpdk correctly.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
While attempting to get ovs to be built and run with py3 (completely
free of py2) host contamination was found (builds on hosts without
python-six installed would fail). It was also determined that pyc
files were still being generated with py2 and not py3. This resulted
in more work being done to achieve the desired results. This work was
sent upstream and subsequently merged. Unfortunately this didn't make
v2.7.1 and may not be available until the next major release, so here
we backport these commits and adjust the recipe to get a clean py3
only build.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Released at the end of June 2017 this is a bugfix release with no
major functional changes. Surprisingly the patch for CVE-2017-9263 is
still not applied upstream so we continue to carry this change.
The remaining patches were audited and cleaned up as needed.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
As far as I can tell openvswitch has been updated to work with python3
as well as with python(2). Switch to depend on python3 and use python3
for associated scripts. For the most part openvswitch will bind at
runtime to either py2 or py3 regardless of these changes, with these
changes we just do a better job of setting up the dependencies to
facilitate py3 bindings. The openvswitch autotests results are mostly
identical before and after this switch (failures move from python3 to
python(2) test cases as expected, with some exceptions see below).
When running the autotests/ptest with python(2) vs python3 we see a
slightly higher failure rate (334 failures vs. 284 failures). I do not
believe this higher fail rate reflects actual errors in the runtime,
rather the tests are not adapted to python3. At any rate like the rest
of openvswitch it is fairly straightforward to hack the logic for
autotests to be run using py2 as long as it is available in the image,
so these changes don't prevent falling back to py2 for autotests. This
should facilitate any debugging we need to do based on us switching to
favor py3.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
On a minimally provisioned rootfs the tests are currently getting
'stuck' after running for a few minutes because 'find' and 'which' are
not being found. Add these to the ptest package RDEPENDS to ensure
they are present in the rootfs.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Backport patch file to fix CVE-2017-9263
Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
This version of OVS was released on Feb. 21. Bringing our recipe up to
date with the latest release ensure we have all the latest CVE fixes
as well as any new functionality that folks might be looking
for. Additionally we are better situated to support up to date
releases of DPDK (v16.11 in this case). No surprises with the uprev,
it passes all usecase tests (meta-overc) and ptest results are much
the same as the results we had in v2.6.1. While completing the uprev I
took the opportunity to do some cleanup of patches that were no longer
used or required.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
I was getting the following error when building the latest master:
../git/build-aux/calculate-schema-cksum: cksum: not found
../git/build-aux/calculate-schema-cksum: cksum: not found
Adding coreutils-native which supplies 'cksum' resolved this.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
There is only a single PYTHON variable for configure and yet python is
used for the build as well as scripts installed on the target. If we
set a path in PYTHON as we had we end up using this same path during
the build and since it isn't to the sysroot we end up with host
contamination (as demonstrated by python failing to import 'six' on
build hosts without python-six installed.
The best approach is to set PYTHON to "python" when calling configure,
ie. without a path. This will use 'python' from the path during build
time and by ensuring all the installed scripts use '/usr/bin/env' we
can ensure python will be found on the target when the scripts are
run.
Since 'six' is used as part of the build we have to ensure it is
-native'ly buildable and we set all the required build and runtime
dependencies.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Pick up the latest features, including compatability with the latest
DPDK as well as bug fixes.
The patches for TARGET_PYTHON and TARGET_PERL can be dropped as
configure now lets us pass these in the env (which we set).
The systemd service files have been shuffled some upstream and we make
adjustments in the recipe to accomodate these. The sysvinit scripts
remain functional as they are.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
This reverts commit 67185ef0f8e1ebedd080ddaeb18d1e56f5034d45.
|
|
Upstream commit a489b16854b5 [conntrack: New userspace connection
tracker.] classified new files under existing licenses in COPYING,
resulting in no change to the overall licenses but requires a new
checksum.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
ovs-test program requires python-twisted and ovstest python
modules to execute successfully. The changes fix below
errors:
-- snip --
root@qemux86:~# ovs-test
Traceback (most recent call last):
File "/usr/bin/ovs-test", line 31, in <module>
import twisted
ImportError: No module named twisted
root@qemux86:~# ovs-test
Traceback (most recent call last):
File "/usr/bin/ovs-test", line 33, in <module>
import ovstest.args as args
ImportError: No module named ovstest.args
root@qemux86:~#
-- snip --
Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
error: file /var/run from install of openvswitch-2.1.3-r0.x86_64
conflicts with file from package base-files-3.0.14-r89.ubinux_x86_64
Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Set PYTHON to TARGET_PYTHON for running on target
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
- Copy certain files from srcdir since it has been different from
build directory.
- Copy more necessary files for new added test cases.
- Modify config files for running on target.
- Add necessary RDEPENDS
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Uprev to git rev bb429e09f7783f1ba23ac0682ed9edf424f0cfbb (based on 2.5.0)
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Make the necessary updates to get openvswitch to be compatible with
systemd. Up to now if you built a systemd supported image openvswitch
was using the systemd sysvinit wrappers, by making these changes we
now support systemd natively.
Note that there is no equivalent systemd support for
openvswitch-testcontroller. Following the lead of upstream this
is not something that should be run by the init system.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
As of version 2.4.0 openvswitch-controller has been renamed to
openvswitch-testcontroller. This was documented in the upstream 'NEWS':
- test-controller has been renamed ovs-testcontroller at request of users
who find it useful for testing basic OpenFlow setups. It is still not
a necessary or desirable part of most Open vSwitch deployments.
Our initscripts and such have continued to reference the old name
despite the application name name changing and so
openvswitch-controller packaging has been broken for some time now.
We rename the openvswitch-controller package to reflect the upstream
name change and apply this name change throughout. We also drop the
RDEPENDS as the upstream comments also indicate that this package is
not needed for a normal openvswitch deployment.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
There are some changes that we need to make in the .inc file to
properly support more recent releases of openvswitch. These changes
are not compatible with these older versions of openvswitch, so rather
than make accommodations in the .inc file to continue to support this
version we will simply drop them.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Uprev to git rev bb429e09f7783f1ba23ac0682ed9edf424f0cfbb (based on 2.4.0)
- Remove non_reproducible_builds_cleanup.patch since it
have been in the version 2.4.0.
Signed-off-by: Jianchuan Wang <jianchuan.wang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
compilation failed since the needed dirs maybe not created when make
".in" target, fix it by creating the needed dirs before, but mainstream
thinks the needed dirs should be created when do configuration.
at last, find CONFIGUREOPT_DEPTRACK disable the creation, so empty
it
http://openvswitch.org/pipermail/dev/2015-August/059189.html
set CONFIGUREOPT_DEPTRACK to empty, is lower effective, but harmless,
and can fix the parallel building issue;
see oe-core 970e0ae6108[autotools: Disable dependency tracking
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Fix the following QA warning:
WARNING: QA Issue: openvswitch requires /bin/bash, but no providers in its RDEPENDS [file-rdeps]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Like the previous versions of OVS, we rely on the virtual/kernel provider
to build the appropriate modules. Passing the --with-linux and --with-linux-source
breaks builds when the split source/build/build-artifacts are not as
expected (and modules are attempted to be built from the wrong directory).
To fix this, we simply don't enable those options, and all is well.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
The dpdk recipes are not commonly available, so we shouldn't have
dpdk in the PACKAGECONFIG by default.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
Zqiang
Chen Qi
Changqing Li
Mark Asselstine
Hongzhi.Song
Paul Barker
Mark Hatle
Jason Wessel
Hongxu Jia
Yi Zhao
Fan Xin
Khem Raj
Bruce Ashfield
Jagadeesh Krishnanjanappa
Dai Caiyun
He Zhe
Jianchuan Wang
Roy Li