aboutsummaryrefslogtreecommitdiffstats
path: root/dynamic-layers
AgeCommit message (Collapse)Author
2024-02-22xen-boot-cmd.inc: Fix initrd boot issue with 6.6 kernelSandeep Gundlupet Raju
Due to increase in 6.6 kernel image size xen ramdisk offset was overlapping with kernel image. This causes xen randisk image boot failures. Hence increase the ramdisk offset to fix initrd boot issue. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2024-01-24rpi: linux-yocto: move bbappend to 6.1Bruce Ashfield
Moving the rpi to 6.6 to enable extended testing. Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2023-12-14zynqmp-xen-qemu.dtsi: Remove device_type dt nodesSandeep Gundlupet Raju
Remove device_type device tree nodes as these nodes are no longer required for Xen qemu boot. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2023-08-17xen-boot-cmd: Remove hard assigment for ramdisk imageSandeep Gundlupet Raju
Setting hard assignment for RAMDISK_IMAGE will take precedence during variable pre-expansion. Hence set RAMDISK_IMAGE variable with soft assignment. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2023-08-01recipes-bsp: Add u-boot-xlnx scripts for Xen supportSandeep Gundlupet Raju
Add new boot.cmd.xen to u-boot-xlnx-scr bbappend to enable Xen support for ZynqMP and Versal devices. User can enable xen u-boot script by adding below variable from configuration file. BOOTMODE = "xen" This u-boot script also supports to configure below Xen params from configuration file params variable assignment ------ ------------------- duart XEN_SERIAL_CONSOLES = "serial0" dom0_mem DOM0_MEM = "1500M" dom0_max_vcpus DOM0_MAX_VCPUS = "1" extra params XEN_CMDLINE_APPEND = "loglvl=all" Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2023-08-01recipes-bsp: Add device-tree files for Xen supportSandeep Gundlupet Raju
Add device-tree files for Xen support, Earlier all these files were in meta-petalinux layer, Hence move these files to this layer so that users can build Xen without including meta-petalinux. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2023-05-29rpi, xen, linux-yocto: enable linux-yocto 6.1 for RPi4Christopher Clark
Added to the raspberrypi dynamic layer for use with Xen as the default preference for Linux kernel. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2023-05-29rpi: linux-yocto: drop 5.15 bbappendMartin Jansa
* 5.15 recipe was dropped from oe-core in: https://git.openembedded.org/openembedded-core/commit/?h=master-next&id=e30b37776d16cfd4ce7f79746427ccd95b306059 Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2022-10-26xen: Make xilinx extension genericMark Hatle
Move the xilinx specific bbappend to a wildcard append. Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2022-08-12dynamic-layers/raspberrypi: drop linux-yocto 5.10 bbappendMartin Jansa
* the inc file was dropped in: 58f5ac6 kernel: drop 5.10 .inc but this .bbappend still causes parsing error, because 5.10 recipes were removed from oe-core Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2022-05-25xen, raspberry pi: replace linux-yocto-dev with linux-yocto 5.15Christopher Clark
The default preferred Linux kernel for Xen on the Raspberry Pi 4 is linux-yocto. The alternative provided option is linux-yocto-dev, but this is unintentionally a branch tracking configuration rather than a fixed revision. Remove the linux-yocto-dev in favour of the linux-yocto kernel version 5.15 which has been tested and verified working on the board. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2021-10-08xen, rpi4: Use PARTUUID for rootfs discoveryluca fancellu
The mmc probing order has become unpredictable due to recent linux kernel changes, therefore devices like the raspberry pi that have two mmc interface most of the time can't boot from the hard-coded root path. Modify the u-boot script to fetch the PARTUUID of the second partition of the sd card and use it to put root=PARTUUID=<xxx> in the command line passed to the dom0 kernel. Reviewed-by: Diego Sueiro <diego.sueiro@arm.com> Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com> Reviewed-by: Christopher Clark <christopher.w.clark@gmail.com> Tested-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Luca Fancellu <luca.fancellu@arm.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2021-10-08xen, rpi4: Fix syntax in linux-yocto bbappendluca fancellu
Syntax conversion for bbappend linux-yocto_5.10 and linux-yocto-dev inside the raspberrypi dynamic layer. Reviewed-by: Diego Sueiro <diego.sueiro@arm.com> Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com> Reviewed-by: Christopher Clark <christopher.w.clark@gmail.com> Tested-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Luca Fancellu <luca.fancellu@arm.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2021-08-02global: overrides syntax conversionBruce Ashfield
OEcore/bitbake are moving to use the clearer ":" as an overrides separator. This is pass one of updating the meta-virt recipes to use that syntax. This has only been minimally build/runtime tested, more changes will be required for missed overrides, or incorrect conversions Note: A recent bitbake is required: commit 75fad23fc06c008a03414a1fc288a8614c6af9ca Author: Richard Purdie <richard.purdie@linuxfoundation.org> Date: Sun Jul 18 12:59:15 2021 +0100 bitbake: data_smart/parse: Allow ':' characters in variable/function names It is becomming increasingly clear we need to find a way to show what is/is not an override in our syntax. We need to do this in a way which is clear to users, readable and in a way we can transition to. The most effective way I've found to this is to use the ":" charater to directly replace "_" where an override is being specified. This includes "append", "prepend" and "remove" which are effectively special override directives. This patch simply adds the character to the parser so bitbake accepts the value but maps it back to "_" internally so there is no behaviour change. This change is simple enough it could potentially be backported to older version of bitbake meaning layers using the new syntax/markup could work with older releases. Even if other no other changes are accepted at this time and we don't backport, it does set us on a path where at some point in future we could require a more explict syntax. I've tested this patch by converting oe-core/meta-yocto to the new syntax for overrides (9000+ changes) and then seeing that builds continue to work with this patch. (Bitbake rev: 0dbbb4547cb2570d2ce607e9a53459df3c0ac284) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2021-04-29xen: Remove deltask for setsceneMark Hatle
As of the gatesgarth you are no longer allowed to remove setscene tasks as the eSDK generation expects for tasks to actually be executed. Signed-off-by: Mark Hatle <mark.hatle@xilinx.com> Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2021-04-29xen, rpi4: add xen-rpi-u-boot-scr recipe for default u-boot scriptChristopher Clark
Add a new xen-rpi-u-boot-scr recipe to PROVIDE u-boot-default-script instead of using a bbappend to rpi-u-boot-scr. This allows the new recipe to be selected by indicating it as PREFERRED_PROVIDER of u-boot-default-script, and then do that in the Xen on Raspberry Pi 4 config file, xen-raspberrypi4-64.inc. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2021-04-29xen, rpi4: move rpi4-machine+xen-distro cfg into dynamic layerChristopher Clark
Improve meta-virt-xen.inc by moving all the Raspberry Pi 4 config settings to a new xen-raspberrypi4-64.inc file in the raspberrypi dynamic layer. The new .inc file is included only for the raspberrypi4-64 MACHINE, so the config settings no longer need to be applied using overrides. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2021-04-29xen, rpi4: apply workaround to fix crash on boot with Xen 4.14Christopher Clark
Apply update to the device tree to allow Xen 4.14 to boot. Suggested-by: Bertrand Marquis <bertrand.marquis@arm.com> Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2021-04-29xen, rpi4: fix u-boot script to load binaries from boot partitionChristopher Clark
fatload needs to read from mmc 1:1 to find the Xen hypervisor and Linux kernel binaries with the current Yocto Linux 5.10 kernel. Add boot messages to to the u-boot script to indicate the size of files loaded for easier confirmation of load success. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2021-04-29xen, rpi4, linux-yocto: enable linux-yocto 5.10 for RPi4Christopher Clark
Added to the raspberrypi dynamic layer for use with Xen as preparation for switching to it as the default preference. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2021-04-29xen, rpi4: drop the raspberrypi4-64 defconfig, xen_git.bbappendChristopher Clark
Since upstream Xen 4.14 and 4.15 have working default configs for Xen on the Raspberry Pi 4, the defconfig and bbappend in the raspberrypi dynamic layer can now be removed. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2021-04-29xen, rpi4: use the preferred generic multiboot,module compatible stringChristopher Clark
This string has been preferred since 2014 -- ref: Xen commit a860dfeec and also current documentation: docs/misc/arm/device-tree/booting.txt Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2020-12-28xen, linux-yocto-dev, RPi4: weaker assign for KBRANCH and KMACHINEChristopher Clark
Switch to use ?= to set KBRANCH_raspberrypi4-64 to make it easier to override elsewhere when needed for switching to a different kernel branch. Also make the same change for KMACHINE_raspberrypi4-64 to match how it is assigned in the meta-yocto-bsp layer. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2020-09-22dynamic-layers: add xilinx dynamic layer for Xen supportBruce Ashfield
Although this dynamic layer currently only adds Xen support, it will eventually hold other board and platform specific tweaks to core meta-virt recipes. Signed-off-by: Bruce Ashfield <bruce.ashfield@xilinx.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2020-08-11xen, raspi4, linux-yocto-dev: Enable Xen on Raspberry Pi 4Christopher Clark
Enable linux-yocto-dev as the Linux kernel for Xen on the Raspberry Pi 4, with the bcm-2xxx-rpi4 KMACHINE and KBRANCH. Set a Raspberry Pi SD card variable to increase the size of the boot partition to accommodate both the kernel and the Xen hypervisor. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2020-08-11xen, linux-raspberrypi4: remove linux-raspberrypi bbappends and patchesChristopher Clark
Retiring use of the downstream vendor kernel for use with Xen. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2020-08-11xen, rpi4: use RPI_EXTRA_CONFIG and drop the rpi-config_git.bbappendChristopher Clark
The GIC that is needed by Xen can be enabled via the rpi-config recipe variable. Fixes the build after the upstream recipe changed recently. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2020-08-11xen, raspberrypi: bugfix early boot messages: use earlycon=xenbootChristopher Clark
Replaces the prior use of earlyprintk which is an x86-specific option. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2020-07-06xen, linux-raspberrypi: add Linux kernel 5.4 patches for Xen supportChristopher Clark
Kernel patches are in process of Linux review and submission, and are backported from the Linux Foundation's Eve Project kernel from 5.6 to 5.4 (some patches not needed for 5.4, hence gaps in the patch sequence number) https://github.com/lf-edge/eve/tree/master/pkg/new-kernel/patches-5.6.x A bbappend applies Xen overrides to the boot command line. Since linux-raspberrypi depends on linux-yocto, and linux-yocto_virtualization introduces a requirement for cfg/virtio.scc obtain it from the yocto kernel cache. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2020-07-06xen, raspberry pi 4: provide a default defconfig for raspberrypi4Christopher Clark
Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2020-07-06xen, raspberry pi: add dynamic-layer for Xen configuration for Rpi4Christopher Clark
A Xen-specific u-boot script is needed for launching Xen, and the GIC (interrupt controller) needs to be enabled. Since this is both Xen-specific and Raspberry Pi-specific, use a dynamic layer to conditionally enable the recipes when both meta-virtualization and meta-raspberrypi are in use together. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-06 01:05:35 +0000