diff options
Diffstat (limited to 'extras/recipes-kernel/linux/linux-omap-2.6.39/beagle/0002-OMAP3-beagle-add-support-for-expansionboards.patch')
| -rw-r--r-- | extras/recipes-kernel/linux/linux-omap-2.6.39/beagle/0002-OMAP3-beagle-add-support-for-expansionboards.patch | 359 |
1 files changed, 359 insertions, 0 deletions
diff --git a/extras/recipes-kernel/linux/linux-omap-2.6.39/beagle/0002-OMAP3-beagle-add-support-for-expansionboards.patch b/extras/recipes-kernel/linux/linux-omap-2.6.39/beagle/0002-OMAP3-beagle-add-support-for-expansionboards.patch new file mode 100644 index 00000000..2e95c763 --- /dev/null +++ b/extras/recipes-kernel/linux/linux-omap-2.6.39/beagle/0002-OMAP3-beagle-add-support-for-expansionboards.patch @@ -0,0 +1,359 @@ +From 27494059a5d005b8cad4e0e8640ff031b86220dc Mon Sep 17 00:00:00 2001 +From: Koen Kooi <koen@dominion.thruhere.net> +Date: Fri, 20 May 2011 13:06:24 +0200 +Subject: [PATCH 2/7] OMAP3: beagle: add support for expansionboards + +Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> +--- + arch/arm/mach-omap2/board-omap3beagle.c | 272 ++++++++++++++++++++++++++++++- + 1 files changed, 269 insertions(+), 3 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index 77bafa8..db285e1 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -21,6 +21,7 @@ + #include <linux/io.h> + #include <linux/leds.h> + #include <linux/gpio.h> ++#include <linux/irq.h> + #include <linux/input.h> + #include <linux/gpio_keys.h> + #include <linux/opp.h> +@@ -154,6 +155,167 @@ fail0: + return; + } + ++char expansionboard_name[16]; ++ ++#if defined(CONFIG_WL12XX) || defined(CONFIG_WL12XX_MODULE) ++#include <linux/regulator/fixed.h> ++#include <linux/wl12xx.h> ++ ++#define OMAP_BEAGLE_WLAN_EN_GPIO (139) ++#define OMAP_BEAGLE_BT_EN_GPIO (138) ++#define OMAP_BEAGLE_WLAN_IRQ_GPIO (137) ++#define OMAP_BEAGLE_FM_EN_BT_WU (136) ++ ++struct wl12xx_platform_data omap_beagle_wlan_data __initdata = { ++ .irq = OMAP_GPIO_IRQ(OMAP_BEAGLE_WLAN_IRQ_GPIO), ++ .board_ref_clock = 2, /* 38.4 MHz */ ++}; ++ ++static int gpios[] = {OMAP_BEAGLE_BT_EN_GPIO, OMAP_BEAGLE_FM_EN_BT_WU, -1}; ++static struct platform_device wl12xx_device = { ++ .name = "kim", ++ .id = -1, ++ .dev.platform_data = &gpios, ++}; ++ ++static struct omap2_hsmmc_info mmcbbt[] = { ++ { ++ .mmc = 1, ++ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, ++ .gpio_wp = 29, ++ }, ++ { ++ .name = "wl1271", ++ .mmc = 2, ++ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, ++ .gpio_wp = -EINVAL, ++ .gpio_cd = -EINVAL, ++ .ocr_mask = MMC_VDD_165_195, ++ .nonremovable = true, ++ }, ++ {} /* Terminator */ ++ }; ++ ++static struct regulator_consumer_supply beagle_vmmc2_supply = ++ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); ++ ++static struct regulator_init_data beagle_vmmc2 = { ++ .constraints = { ++ .min_uV = 1850000, ++ .max_uV = 1850000, ++ .apply_uV = true, ++ .valid_modes_mask = REGULATOR_MODE_NORMAL ++ | REGULATOR_MODE_STANDBY, ++ .valid_ops_mask = REGULATOR_CHANGE_MODE ++ | REGULATOR_CHANGE_STATUS, ++ }, ++ .num_consumer_supplies = 1, ++ .consumer_supplies = &beagle_vmmc2_supply, ++}; ++ ++static struct fixed_voltage_config beagle_vwlan = { ++ .supply_name = "vwl1271", ++ .microvolts = 1800000, /* 1.8V */ ++ .gpio = OMAP_BEAGLE_WLAN_EN_GPIO, ++ .startup_delay = 70000, /* 70ms */ ++ .enable_high = 1, ++ .enabled_at_boot = 0, ++ .init_data = &beagle_vmmc2, ++}; ++ ++static struct platform_device omap_vwlan_device = { ++ .name = "reg-fixed-voltage", ++ .id = 1, ++ .dev = { ++ .platform_data = &beagle_vwlan, ++ }, ++}; ++#endif ++ ++#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) ++ ++#include <plat/mcspi.h> ++#include <linux/spi/spi.h> ++ ++#define OMAP3BEAGLE_GPIO_ENC28J60_IRQ 157 ++ ++static struct omap2_mcspi_device_config enc28j60_spi_chip_info = { ++ .turbo_mode = 0, ++ .single_channel = 1, /* 0: slave, 1: master */ ++}; ++ ++static struct spi_board_info omap3beagle_zippy_spi_board_info[] __initdata = { ++ { ++ .modalias = "enc28j60", ++ .bus_num = 4, ++ .chip_select = 0, ++ .max_speed_hz = 20000000, ++ .controller_data = &enc28j60_spi_chip_info, ++ }, ++}; ++ ++static void __init omap3beagle_enc28j60_init(void) ++{ ++ if ((gpio_request(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, "ENC28J60_IRQ") == 0) && ++ (gpio_direction_input(OMAP3BEAGLE_GPIO_ENC28J60_IRQ) == 0)) { ++ gpio_export(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, 0); ++ omap3beagle_zippy_spi_board_info[0].irq = OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_ENC28J60_IRQ); ++ irq_set_irq_type(omap3beagle_zippy_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING); ++ } else { ++ printk(KERN_ERR "could not obtain gpio for ENC28J60_IRQ\n"); ++ return; ++ } ++ ++ spi_register_board_info(omap3beagle_zippy_spi_board_info, ++ ARRAY_SIZE(omap3beagle_zippy_spi_board_info)); ++} ++ ++#else ++static inline void __init omap3beagle_enc28j60_init(void) { return; } ++#endif ++ ++#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE) ++ ++#include <plat/mcspi.h> ++#include <linux/spi/spi.h> ++ ++#define OMAP3BEAGLE_GPIO_KS8851_IRQ 157 ++ ++static struct omap2_mcspi_device_config ks8851_spi_chip_info = { ++ .turbo_mode = 0, ++ .single_channel = 1, /* 0: slave, 1: master */ ++}; ++ ++static struct spi_board_info omap3beagle_zippy2_spi_board_info[] __initdata = { ++ { ++ .modalias = "ks8851", ++ .bus_num = 4, ++ .chip_select = 0, ++ .max_speed_hz = 36000000, ++ .controller_data = &ks8851_spi_chip_info, ++ }, ++}; ++ ++static void __init omap3beagle_ks8851_init(void) ++{ ++ if ((gpio_request(OMAP3BEAGLE_GPIO_KS8851_IRQ, "KS8851_IRQ") == 0) && ++ (gpio_direction_input(OMAP3BEAGLE_GPIO_KS8851_IRQ) == 0)) { ++ gpio_export(OMAP3BEAGLE_GPIO_KS8851_IRQ, 0); ++ omap3beagle_zippy2_spi_board_info[0].irq = OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_KS8851_IRQ); ++ irq_set_irq_type(omap3beagle_zippy2_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING); ++ } else { ++ printk(KERN_ERR "could not obtain gpio for KS8851_IRQ\n"); ++ return; ++ } ++ ++ spi_register_board_info(omap3beagle_zippy2_spi_board_info, ++ ARRAY_SIZE(omap3beagle_zippy2_spi_board_info)); ++} ++ ++#else ++static inline void __init omap3beagle_ks8851_init(void) { return; } ++#endif ++ + static struct mtd_partition omap3beagle_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { +@@ -272,6 +434,12 @@ static struct omap2_hsmmc_info mmc[] = { + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .gpio_wp = 29, + }, ++ { ++ .mmc = 2, ++ .caps = MMC_CAP_4_BIT_DATA, ++ .transceiver = true, ++ .ocr_mask = 0x00100000, /* 3.3V */ ++ }, + {} /* Terminator */ + }; + +@@ -301,11 +469,25 @@ static int beagle_twl_gpio_setup(struct device *dev, + } + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + mmc[0].gpio_cd = gpio + 0; ++#if defined(CONFIG_WL12XX) || defined(CONFIG_WL12XX_MODULE) ++ if(!strcmp(expansionboard_name, "bbtoys-wifi")) { ++ omap2_hsmmc_init(mmcbbt); ++ /* link regulators to MMC adapters */ ++ beagle_vmmc1_supply.dev = mmcbbt[0].dev; ++ beagle_vsim_supply.dev = mmcbbt[0].dev; ++ } else { ++ omap2_hsmmc_init(mmc); ++ /* link regulators to MMC adapters */ ++ beagle_vmmc1_supply.dev = mmc[0].dev; ++ beagle_vsim_supply.dev = mmc[0].dev; ++ } ++#else + omap2_hsmmc_init(mmc); + + /* link regulators to MMC adapters */ + beagle_vmmc1_supply.dev = mmc[0].dev; + beagle_vsim_supply.dev = mmc[0].dev; ++#endif + + /* REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect +@@ -466,7 +648,7 @@ static struct twl4030_platform_data beagle_twldata = { + .vpll2 = &beagle_vpll2, + }; + +-static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { ++static struct i2c_board_info __initdata beagle_i2c1_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, +@@ -481,10 +663,24 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { + }, + }; + ++#if defined(CONFIG_RTC_DRV_DS1307) || \ ++ defined(CONFIG_RTC_DRV_DS1307_MODULE) ++ ++static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = { ++ { ++ I2C_BOARD_INFO("ds1307", 0x68), ++ }, ++}; ++#else ++static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {}; ++#endif ++ + static int __init omap3_beagle_i2c_init(void) + { +- omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo, +- ARRAY_SIZE(beagle_i2c_boardinfo)); ++ omap_register_i2c_bus(1, 2600, beagle_i2c1_boardinfo, ++ ARRAY_SIZE(beagle_i2c1_boardinfo)); ++ omap_register_i2c_bus(2, 400, beagle_i2c2_boardinfo, ++ ARRAY_SIZE(beagle_i2c2_boardinfo)); + /* Bus 3 is attached to the DVI port where devices like the pico DLP + * projector don't work reliably with 400kHz */ + omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom)); +@@ -627,6 +823,15 @@ static struct omap_musb_board_data musb_board_data = { + .power = 100, + }; + ++static int __init expansionboard_setup(char *str) ++{ ++ if (!str) ++ return -EINVAL; ++ strncpy(expansionboard_name, str, 16); ++ printk(KERN_INFO "Beagle expansionboard: %s\n", expansionboard_name); ++ return 0; ++} ++ + static void __init beagle_opp_init(void) + { + int r = 0; +@@ -693,6 +898,65 @@ static void __init omap3_beagle_init(void) + /* REVISIT leave DVI powered down until it's needed ... */ + gpio_direction_output(170, true); + ++ if(!strcmp(expansionboard_name, "zippy")) ++ { ++ printk(KERN_INFO "Beagle expansionboard: initializing enc28j60\n"); ++ omap3beagle_enc28j60_init(); ++ printk(KERN_INFO "Beagle expansionboard: assigning GPIO 141 and 162 to MMC1\n"); ++ mmc[1].gpio_wp = 141; ++ mmc[1].gpio_cd = 162; ++ } ++ ++ if(!strcmp(expansionboard_name, "zippy2")) ++ { ++ printk(KERN_INFO "Beagle expansionboard: initializing ks_8851\n"); ++ omap3beagle_ks8851_init(); ++ printk(KERN_INFO "Beagle expansionboard: assigning GPIO 141 and 162 to MMC1\n"); ++ mmc[1].gpio_wp = 141; ++ mmc[1].gpio_cd = 162; ++ } ++ ++ if(!strcmp(expansionboard_name, "trainer")) ++ { ++ printk(KERN_INFO "Beagle expansionboard: exporting GPIOs 130-141,162 to userspace\n"); ++ gpio_request(130, "sysfs"); ++ gpio_export(130, 1); ++ gpio_request(131, "sysfs"); ++ gpio_export(131, 1); ++ gpio_request(132, "sysfs"); ++ gpio_export(132, 1); ++ gpio_request(133, "sysfs"); ++ gpio_export(133, 1); ++ gpio_request(134, "sysfs"); ++ gpio_export(134, 1); ++ gpio_request(135, "sysfs"); ++ gpio_export(135, 1); ++ gpio_request(136, "sysfs"); ++ gpio_export(136, 1); ++ gpio_request(137, "sysfs"); ++ gpio_export(137, 1); ++ gpio_request(138, "sysfs"); ++ gpio_export(138, 1); ++ gpio_request(139, "sysfs"); ++ gpio_export(139, 1); ++ gpio_request(140, "sysfs"); ++ gpio_export(140, 1); ++ gpio_request(141, "sysfs"); ++ gpio_export(141, 1); ++ gpio_request(162, "sysfs"); ++ gpio_export(162, 1); ++ } ++ ++ if(!strcmp(expansionboard_name, "bbtoys-wifi")) ++ { ++ if (wl12xx_set_platform_data(&omap_beagle_wlan_data)) ++ pr_err("error setting wl12xx data\n"); ++ printk(KERN_INFO "Beagle expansionboard: registering wl12xx bt platform device\n"); ++ platform_device_register(&wl12xx_device); ++ printk(KERN_INFO "Beagle expansionboard: registering wl12xx wifi platform device\n"); ++ platform_device_register(&omap_vwlan_device); ++ } ++ + usb_musb_init(&musb_board_data); + usbhs_init(&usbhs_bdata); + omap3beagle_flash_init(); +@@ -705,6 +969,8 @@ static void __init omap3_beagle_init(void) + beagle_opp_init(); + } + ++early_param("buddy", expansionboard_setup); ++ + MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") + /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ + .boot_params = 0x80000100, +-- +1.6.6.1 + |